* [PATCH] Additional AT91 machine configurations (untested, and requires AT91SAM9G45EK patchset before use)
@ 2010-01-12 22:50 Ulf Samuelsson
0 siblings, 0 replies; only message in thread
From: Ulf Samuelsson @ 2010-01-12 22:50 UTC (permalink / raw)
To: openembedded-devel
From: Ulf Samuelsson <ulf.samuelsson@atmel.com>
Add machine configurations using the two new include files
provided by the AT91SAM9G45 BSP
(AT91.inc and AT91-LCD.inc in machine/include)
These have not been tested on a board yet,
but will allow other people to test and perhaps merge.
Signed-off-by: Ulf Samuelsson <ulf.samuelsson@atmel.com>
---
diff --git a/conf/machine/at91cap9adk.conf b/conf/machine/at91cap9adk.conf
index 87311e9..b0c34fa 100644
--- a/conf/machine/at91cap9adk.conf
+++ b/conf/machine/at91cap9adk.conf
@@ -1,28 +1,14 @@
#@TYPE: Machine
-#@Name: Atmel AT91CAP9ADK Development Platform
-#@DESCRIPTION: Machine configuration for the at91cap9adk development
board with a at91cap9500 processor
+#@Name: Atmel AT91CAP9STK Development Platform
+#@DESCRIPTION: Machine configuration for the at91cap9stk development
board with a at91cap9500 processor
-TARGET_ARCH = "arm"
-PREFERRED_PROVIDER_virtual/kernel = "linux"
-PREFERRED_VERSION_linux = "2.6.28"
-PREFERRED_PROVIDER_xserver = "xserver-kdrive"
+include conf/machine/include/AT91-LCD.inc
-KERNEL_IMAGETYPE = "uImage"
-UBOOT_MACHINE = "at91cap9adk_config"
+# Has no linux config file in OpenEmbedded
+LINUX26_DEFCONFIG = "at91cap9adk_defconfig"
+UBOOT_MACHINE = "at91cap9stk_config"
+AT91BOOTSTRAP_BOARD = "at91cap9stk"
-PREFERRED_VERSION_at91bootstrap = "2.10"
+MACHINE_FEATURES += "usbhost"
-#don't try to access tty1
-USE_VT = "0"
-
-MACHINE_FEATURES = "kernel26 alsa ext2 usbhost usbgadget screen
touchscreen"
-EXTRA_IMAGEDEPENDS += "u-boot"
-#EXTRA_IMAGEDEPENDS += "at91bootstrap"
-
-# used by sysvinit_2
-SERIAL_CONSOLE = "115200 ttyS0"
-IMAGE_FSTYPES ?= "jffs2"
-EXTRA_IMAGECMD_jffs2 = "--pad --little-endian --eraseblock=0x20000 -n"
-
-require conf/machine/include/tune-arm926ejs.inc
diff --git a/conf/machine/at91sam9260ek.conf
b/conf/machine/at91sam9260ek.conf
index 9a7ca9a..c112f59 100644
--- a/conf/machine/at91sam9260ek.conf
+++ b/conf/machine/at91sam9260ek.conf
@@ -2,28 +2,12 @@
#@Name: Atmel AT91SAM9260EK Development Platform
#@DESCRIPTION: Machine configuration for the at91sam9260ek development
board with a at91sam9260 processor
-TARGET_ARCH = "arm"
-#PACKAGE_EXTRA_ARCHS = "armv4t armv5te"
-PREFERRED_PROVIDER_virtual/kernel = "linux"
-PREFERRED_VERSION_linux = "2.6.28"
-PREFERRED_PROVIDER_xserver = "xserver-kdrive"
+include conf/machine/include/AT91.inc
-KERNEL_IMAGETYPE = "uImage"
+# Has linux config file in OpenEmbedded
+# LINUX26_DEFCONFIG = "at91sam9260ek_defconfig"
UBOOT_MACHINE = "at91sam9260ek_config"
+AT91BOOTSTRAP_BOARD = "at91sam9260ek"
-PREFERRED_VERSION_at91bootstrap = "2.10"
-
-#don't try to access tty1
-USE_VT = "0"
-
-MACHINE_FEATURES = "kernel26 alsa ext2 usbhost usbgadget"
-EXTRA_IMAGEDEPENDS += "u-boot"
-EXTRA_IMAGEDEPENDS += "at91bootstrap"
-
-# used by sysvinit_2
-SERIAL_CONSOLE = "115200 ttyS0"
-IMAGE_FSTYPES ?= "jffs2"
-EXTRA_IMAGECMD_jffs2 = "--pad --little-endian --eraseblock=0x20000 -n"
-
-require conf/machine/include/tune-arm926ejs.inc
+MACHINE_FEATURES += "usbhost"
diff --git a/conf/machine/at91sam9261ek.conf
b/conf/machine/at91sam9261ek.conf
index 79f275f..dee2206 100644
--- a/conf/machine/at91sam9261ek.conf
+++ b/conf/machine/at91sam9261ek.conf
@@ -2,28 +2,13 @@
#@Name: Atmel AT91SAM9261EK Development Platform
#@DESCRIPTION: Machine configuration for the at91sam9261ek development
board with a at91sam9261 processor
-TARGET_ARCH = "arm"
-#PACKAGE_EXTRA_ARCHS = "armv4t armv5te"
-PREFERRED_PROVIDER_virtual/kernel = "linux"
-PREFERRED_VERSION_linux = "2.6.28"
-PREFERRED_PROVIDER_xserver = "xserver-kdrive"
+include conf/machine/include/AT91-LCD.inc
-KERNEL_IMAGETYPE = "uImage"
+# Has linux config file in OpenEmbedded
+# LINUX26_DEFCONFIG = "at91sam9261ek_defconfig"
UBOOT_MACHINE = "at91sam9261ek_config"
+AT91BOOTSTRAP_BOARD = "at91sam9261ek"
-PREFERRED_VERSION_at91bootstrap = "2.10"
+MACHINE_FEATURES += "usbhost"
-#don't try to access tty1
-USE_VT = "0"
-
-MACHINE_FEATURES = "kernel26 alsa ext2 usbhost usbgadget screen
touchscreen"
-EXTRA_IMAGEDEPENDS += "u-boot"
-EXTRA_IMAGEDEPENDS += "at91bootstrap"
-
-# used by sysvinit_2
-SERIAL_CONSOLE = "115200 ttyS0"
-IMAGE_FSTYPES ?= "jffs2"
-EXTRA_IMAGECMD_jffs2 = "--pad --little-endian --eraseblock=0x20000 -n"
-
-require conf/machine/include/tune-arm926ejs.inc
diff --git a/conf/machine/at91sam9263ek.conf
b/conf/machine/at91sam9263ek.conf
index f052170..ef07360 100644
--- a/conf/machine/at91sam9263ek.conf
+++ b/conf/machine/at91sam9263ek.conf
@@ -2,29 +2,12 @@
#@Name: Atmel AT91SAM9263EK Development Platform
#@DESCRIPTION: Machine configuration for the at91sam9263ek development
board with a at91sam9263 processor
-TARGET_ARCH = "arm"
-#PACKAGE_EXTRA_ARCHS = "armv4t armv5te"
-PREFERRED_PROVIDER_virtual/kernel = "linux"
-PREFERRED_VERSION_linux = "2.6.28"
-PREFERRED_PROVIDER_xserver = "xserver-kdrive"
+include conf/machine/include/AT91-LCD.inc
-KERNEL_IMAGETYPE = "uImage"
+# Has linux config file in OpenEmbedded
+# LINUX26_DEFCONFIG = "at91sam9263ek_defconfig"
UBOOT_MACHINE = "at91sam9263ek_config"
+AT91BOOTSTRAP_BOARD = "at91sam9263ek"
-PREFERRED_VERSION_at91bootstrap = "2.10"
-
-#don't try to access tty1
-USE_VT = "0"
-
-MACHINE_FEATURES = "kernel26 alsa ext2 usbhost usbgadget screen
touchscreen"
-EXTRA_IMAGEDEPENDS += "u-boot"
-EXTRA_IMAGEDEPENDS += "at91bootstrap"
-
-# used by sysvinit_2
-SERIAL_CONSOLE = "115200 ttyS0"
-IMAGE_FSTYPES ?= "jffs2"
-EXTRA_IMAGECMD_jffs2 = "--pad --little-endian --eraseblock=0x20000 -n"
-
-require conf/machine/include/tune-arm926ejs.inc
-
+MACHINE_FEATURES += "usbhost"
diff --git a/conf/machine/at91sam9g20ek.conf
b/conf/machine/at91sam9g20ek.conf
index 7dc6ba0..2cc7016 100644
--- a/conf/machine/at91sam9g20ek.conf
+++ b/conf/machine/at91sam9g20ek.conf
@@ -2,26 +2,13 @@
#@Name: Atmel AT91SAM9G20EK Development Platform
#@DESCRIPTION: Machine configuration for the at91sam9g20ek development
board with a at91sam9g20 processor
-TARGET_ARCH = "arm"
-PREFERRED_PROVIDER_virtual/kernel = "linux"
-PREFERRED_VERSION_linux = "2.6.28"
-PREFERRED_PROVIDER_xserver = "xserver-kdrive"
+include conf/machine/include/AT91.inc
-KERNEL_IMAGETYPE = "uImage"
+# Has linux config file in OpenEmbedded
+# LINUX26_DEFCONFIG = "at91sam9g20ek_defconfig"
UBOOT_MACHINE = "at91sam9g20ek_config"
+AT91BOOTSTRAP_BOARD = "at91sam9g20ek"
-PREFERRED_VERSION_at91bootstrap = "2.10"
+MACHINE_FEATURES += "usbhost"
-#don't try to access tty1
-USE_VT = "0"
-
-MACHINE_FEATURES = "kernel26 alsa ext2 usbhost usbgadget"
-EXTRA_IMAGEDEPENDS += "at91bootstrap u-boot"
-
-# used by sysvinit_2
-SERIAL_CONSOLE = "115200 ttyS0"
-IMAGE_FSTYPES ?= "jffs2"
-EXTRA_IMAGECMD_jffs2 = "--pad --little-endian --eraseblock=0x20000 -n"
-
-require conf/machine/include/tune-arm926ejs.inc
diff --git a/conf/machine/at91sam9rlek.conf b/conf/machine/at91sam9rlek.conf
index f7a78dc..3c1cb87 100644
--- a/conf/machine/at91sam9rlek.conf
+++ b/conf/machine/at91sam9rlek.conf
@@ -2,29 +2,13 @@
#@Name: Atmel AT91SAM9RLEK Development Platform
#@DESCRIPTION: Machine configuration for the at91sam9rlek development
board with a at91sam9rl64 processor
-TARGET_ARCH = "arm"
-#PACKAGE_EXTRA_ARCHS = "armv4t armv5te"
-PREFERRED_PROVIDER_virtual/kernel = "linux"
-PREFERRED_VERSION_linux = "2.6.28"
-PREFERRED_PROVIDER_xserver = "xserver-kdrive"
+include conf/machine/include/AT91-LCD.inc
-KERNEL_IMAGETYPE = "uImage"
+# Has no linux config file in OpenEmbedded
+LINUX26_DEFCONFIG = "at91sam9rlek_defconfig"
UBOOT_MACHINE = "at91sam9rlek_config"
+AT91BOOTSTRAP_BOARD = "at91sam9rlek"
-PREFERRED_VERSION_at91bootstrap = "2.10"
-
-#don't try to access tty1
-USE_VT = "0"
-
-MACHINE_FEATURES = "kernel26 alsa ext2 usbhost usbgadget screen
touchscreen"
-EXTRA_IMAGEDEPENDS += "u-boot"
-#EXTRA_IMAGEDEPENDS += "at91bootstrap"
-
-# used by sysvinit_2
-SERIAL_CONSOLE = "115200 ttyS0"
-IMAGE_FSTYPES ?= "jffs2"
-EXTRA_IMAGECMD_jffs2 = "--pad --little-endian --eraseblock=0x20000 -n"
-
-require conf/machine/include/tune-arm926ejs.inc
+# MACHINE_FEATURES += "usbhost" - no host on this one!
--
Best Regards
Ulf Samuelsson
^ permalink raw reply related [flat|nested] only message in thread
only message in thread, other threads:[~2010-01-12 23:12 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2010-01-12 22:50 [PATCH] Additional AT91 machine configurations (untested, and requires AT91SAM9G45EK patchset before use) Ulf Samuelsson
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.