From: Maurus Cuelenaere <mcuelenaere@gmail.com>
To: "Arnaud Patard (Rtp)" <arnaud.patard@rtp-net.org>
Cc: linux-samsung-soc@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
Ben Dooks <ben-linux@fluff.org>
Subject: Re: [PATCH 4/4] ARM: S3C64XX: Add s3c64xx support to touchscreen driver
Date: Mon, 25 Jan 2010 10:45:19 +0100 [thread overview]
Message-ID: <4B5D682F.2020000@gmail.com> (raw)
In-Reply-To: <87aaw2zfd9.fsf@lechat.rtp-net.org>
Op 25-01-10 10:46, Arnaud Patard (Rtp) schreef:
> Maurus Cuelenaere<mcuelenaere@gmail.com> writes:
>
> Hi,
>
>
>> ARM: S3C64XX: Add s3c64xx support to touchscreen driver
>>
>> This ack's the extra interrupt s3c64xx platforms have in the touchscreen driver.
>>
>> Signed-off-by: Maurus Cuelenaere<mcuelenaere@gmail.com>
>> ---
>> drivers/input/touchscreen/Kconfig | 6 +++---
>> drivers/input/touchscreen/s3c2410_ts.c | 28 ++++++++++++++++++++++++----
>> 2 files changed, 27 insertions(+), 7 deletions(-)
>>
>> diff --git a/drivers/input/touchscreen/Kconfig
>> b/drivers/input/touchscreen/Kconfig
>> index dfafc76..0378b3d 100644
>> --- a/drivers/input/touchscreen/Kconfig
>> +++ b/drivers/input/touchscreen/Kconfig
>> @@ -146,11 +146,11 @@ config TOUCHSCREEN_FUJITSU
>> module will be called fujitsu-ts.
>>
>> config TOUCHSCREEN_S3C2410
>> - tristate "Samsung S3C2410 touchscreen input driver"
>> - depends on ARCH_S3C2410
>> + tristate "Samsung S3C touchscreen input driver"
>> + depends on ARCH_S3C2410 || ARCH_S3C64XX
>> select S3C24XX_ADC
>> help
>> - Say Y here if you have the s3c2410 touchscreen.
>> + Say Y here if you have the s3c touchscreen.
>>
>> If unsure, say N.
>>
>> diff --git a/drivers/input/touchscreen/s3c2410_ts.c
>> b/drivers/input/touchscreen/s3c2410_ts.c
>> index 3debbc2..7dfbc38 100644
>> --- a/drivers/input/touchscreen/s3c2410_ts.c
>> +++ b/drivers/input/touchscreen/s3c2410_ts.c
>> @@ -40,7 +40,9 @@
>> #include<plat/regs-adc.h>
>> #include<plat/ts.h>
>>
>> +#ifdef PLAT_S3C24XX
>> #include<mach/regs-gpio.h>
>> +#endif
>>
>> #define TSC_SLEEP (S3C2410_ADCTSC_PULL_UP_DISABLE | S3C2410_ADCTSC_XY_PST(0))
>>
>> @@ -88,6 +90,12 @@ struct s3c2410ts {
>>
>> static struct s3c2410ts ts;
>>
>> +enum s3c_cpu_type {
>> + TYPE_S3C2410,
>> + TYPE_S3C2440,
>> + TYPE_S3C64XX,
>> +};
>> +
>> /**
>> * s3c2410_ts_connect - configure gpio for s3c2410 systems
>> *
>> @@ -95,6 +103,7 @@ static struct s3c2410ts ts;
>> * connected to the device (later systems such as the S3C2440 integrate
>> * these into the device).
>> */
>> +#ifdef PLAT_S3C24XX
>> static inline void s3c2410_ts_connect(void)
>> {
>> s3c2410_gpio_cfgpin(S3C2410_GPG(12), S3C2410_GPG12_XMON);
>> @@ -102,6 +111,7 @@ static inline void s3c2410_ts_connect(void)
>> s3c2410_gpio_cfgpin(S3C2410_GPG(14), S3C2410_GPG14_YMON);
>> s3c2410_gpio_cfgpin(S3C2410_GPG(15), S3C2410_GPG15_nYPON);
>> }
>> +#endif
>>
> Please, remove all theses #ifdef. I don't see the point of them as it's
> only few lines of C code and they don't get executed when running on
> other platforms than 2410.
>
> Arnaud
>
The problem is that s3c2410_gpio_cfgpin() and S3C2410_* isn't defined on
S3C64XX builds so this gives implicit declaration errors.
Regards,
Maurus Cuelenaere
WARNING: multiple messages have this Message-ID (diff)
From: mcuelenaere@gmail.com (Maurus Cuelenaere)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 4/4] ARM: S3C64XX: Add s3c64xx support to touchscreen driver
Date: Mon, 25 Jan 2010 10:45:19 +0100 [thread overview]
Message-ID: <4B5D682F.2020000@gmail.com> (raw)
In-Reply-To: <87aaw2zfd9.fsf@lechat.rtp-net.org>
Op 25-01-10 10:46, Arnaud Patard (Rtp) schreef:
> Maurus Cuelenaere<mcuelenaere@gmail.com> writes:
>
> Hi,
>
>
>> ARM: S3C64XX: Add s3c64xx support to touchscreen driver
>>
>> This ack's the extra interrupt s3c64xx platforms have in the touchscreen driver.
>>
>> Signed-off-by: Maurus Cuelenaere<mcuelenaere@gmail.com>
>> ---
>> drivers/input/touchscreen/Kconfig | 6 +++---
>> drivers/input/touchscreen/s3c2410_ts.c | 28 ++++++++++++++++++++++++----
>> 2 files changed, 27 insertions(+), 7 deletions(-)
>>
>> diff --git a/drivers/input/touchscreen/Kconfig
>> b/drivers/input/touchscreen/Kconfig
>> index dfafc76..0378b3d 100644
>> --- a/drivers/input/touchscreen/Kconfig
>> +++ b/drivers/input/touchscreen/Kconfig
>> @@ -146,11 +146,11 @@ config TOUCHSCREEN_FUJITSU
>> module will be called fujitsu-ts.
>>
>> config TOUCHSCREEN_S3C2410
>> - tristate "Samsung S3C2410 touchscreen input driver"
>> - depends on ARCH_S3C2410
>> + tristate "Samsung S3C touchscreen input driver"
>> + depends on ARCH_S3C2410 || ARCH_S3C64XX
>> select S3C24XX_ADC
>> help
>> - Say Y here if you have the s3c2410 touchscreen.
>> + Say Y here if you have the s3c touchscreen.
>>
>> If unsure, say N.
>>
>> diff --git a/drivers/input/touchscreen/s3c2410_ts.c
>> b/drivers/input/touchscreen/s3c2410_ts.c
>> index 3debbc2..7dfbc38 100644
>> --- a/drivers/input/touchscreen/s3c2410_ts.c
>> +++ b/drivers/input/touchscreen/s3c2410_ts.c
>> @@ -40,7 +40,9 @@
>> #include<plat/regs-adc.h>
>> #include<plat/ts.h>
>>
>> +#ifdef PLAT_S3C24XX
>> #include<mach/regs-gpio.h>
>> +#endif
>>
>> #define TSC_SLEEP (S3C2410_ADCTSC_PULL_UP_DISABLE | S3C2410_ADCTSC_XY_PST(0))
>>
>> @@ -88,6 +90,12 @@ struct s3c2410ts {
>>
>> static struct s3c2410ts ts;
>>
>> +enum s3c_cpu_type {
>> + TYPE_S3C2410,
>> + TYPE_S3C2440,
>> + TYPE_S3C64XX,
>> +};
>> +
>> /**
>> * s3c2410_ts_connect - configure gpio for s3c2410 systems
>> *
>> @@ -95,6 +103,7 @@ static struct s3c2410ts ts;
>> * connected to the device (later systems such as the S3C2440 integrate
>> * these into the device).
>> */
>> +#ifdef PLAT_S3C24XX
>> static inline void s3c2410_ts_connect(void)
>> {
>> s3c2410_gpio_cfgpin(S3C2410_GPG(12), S3C2410_GPG12_XMON);
>> @@ -102,6 +111,7 @@ static inline void s3c2410_ts_connect(void)
>> s3c2410_gpio_cfgpin(S3C2410_GPG(14), S3C2410_GPG14_YMON);
>> s3c2410_gpio_cfgpin(S3C2410_GPG(15), S3C2410_GPG15_nYPON);
>> }
>> +#endif
>>
> Please, remove all theses #ifdef. I don't see the point of them as it's
> only few lines of C code and they don't get executed when running on
> other platforms than 2410.
>
> Arnaud
>
The problem is that s3c2410_gpio_cfgpin() and S3C2410_* isn't defined on
S3C64XX builds so this gives implicit declaration errors.
Regards,
Maurus Cuelenaere
next prev parent reply other threads:[~2010-01-25 9:45 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-01-22 22:47 [PATCH 4/4] ARM: S3C64XX: Add s3c64xx support to touchscreen driver Maurus Cuelenaere
2010-01-22 22:47 ` Maurus Cuelenaere
2010-01-25 9:46 ` Arnaud Patard
2010-01-25 9:46 ` Arnaud Patard (Rtp)
2010-01-25 9:45 ` Maurus Cuelenaere [this message]
2010-01-25 9:45 ` Maurus Cuelenaere
2010-01-25 10:22 ` Arnaud Patard
2010-01-25 10:22 ` Arnaud Patard (Rtp)
2010-01-25 10:32 ` Maurus Cuelenaere
2010-01-25 10:32 ` Maurus Cuelenaere
2010-01-26 14:58 ` Ben Dooks
2010-01-26 14:58 ` Ben Dooks
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4B5D682F.2020000@gmail.com \
--to=mcuelenaere@gmail.com \
--cc=arnaud.patard@rtp-net.org \
--cc=ben-linux@fluff.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-samsung-soc@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.