From: Jes Sorensen <Jes.Sorensen@redhat.com>
To: qemu-devel@nongnu.org
Cc: kvm@vger.kernel.org, "Kevin O'Connor" <kevin@koconnor.net>,
Avi Kivity <avi@redhat.com>,
Anthony Liguori <aliguori@us.ibm.com>
Subject: [PATCH] QEMU-KVM - provide e820 reserve through qemu_cfg
Date: Mon, 25 Jan 2010 17:49:23 +0100 [thread overview]
Message-ID: <4B5DCB93.7050007@redhat.com> (raw)
In-Reply-To: <4B5DCAF2.3010105@redhat.com>
[-- Attachment #1: Type: text/plain, Size: 100 bytes --]
Hi,
This is the QEMU-KVM bits for providing the e820-reserve space through
qemu-cfg.
Cheers,
Jes
[-- Attachment #2: 0011-qemu-kvm-e820-reserve.patch --]
[-- Type: text/plain, Size: 3549 bytes --]
Use qemu-cfg to notify the BIOS of the location of the TSS range to
reserve in the e820 table, to avoid relying on hard coded values.
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
---
hw/fw_cfg.h | 5 +++++
hw/pc.c | 4 ++++
kvm.h | 2 ++
qemu-kvm-x86.c | 6 ++++++
target-i386/kvm.c | 7 +++++++
5 files changed, 24 insertions(+)
Index: qemu-kvm/hw/fw_cfg.h
===================================================================
--- qemu-kvm.orig/hw/fw_cfg.h
+++ qemu-kvm/hw/fw_cfg.h
@@ -67,4 +67,9 @@ FWCfgState *fw_cfg_init(uint32_t ctl_por
#endif /* NO_QEMU_PROTOS */
+struct fw_cfg_e820_reserve {
+ uint32_t addr;
+ uint32_t length;
+};
+
#endif
Index: qemu-kvm/hw/pc.c
===================================================================
--- qemu-kvm.orig/hw/pc.c
+++ qemu-kvm/hw/pc.c
@@ -66,6 +66,7 @@
#define FW_CFG_ACPI_TABLES (FW_CFG_ARCH_LOCAL + 0)
#define FW_CFG_SMBIOS_ENTRIES (FW_CFG_ARCH_LOCAL + 1)
#define FW_CFG_IRQ0_OVERRIDE (FW_CFG_ARCH_LOCAL + 2)
+#define FW_CFG_E820_RESERVE (FW_CFG_ARCH_LOCAL + 3)
#define MAX_IDE_BUS 2
@@ -73,6 +74,7 @@ static fdctrl_t *floppy_controller;
static RTCState *rtc_state;
static PITState *pit;
static PCII440FXState *i440fx_state;
+struct fw_cfg_e820_reserve e820_reserve;
qemu_irq *ioapic_irq_hack;
@@ -475,6 +477,8 @@ static void *bochs_bios_init(void)
if (smbios_table)
fw_cfg_add_bytes(fw_cfg, FW_CFG_SMBIOS_ENTRIES,
smbios_table, smbios_len);
+ fw_cfg_add_bytes(fw_cfg, FW_CFG_E820_RESERVE, (uint8_t *)&e820_reserve,
+ sizeof(struct fw_cfg_e820_reserve));
/* allocate memory for the NUMA channel: one (64bit) word for the number
* of nodes, one word for each VCPU->node and one word for each node to
Index: qemu-kvm/kvm.h
===================================================================
--- qemu-kvm.orig/kvm.h
+++ qemu-kvm/kvm.h
@@ -101,6 +101,8 @@ void kvm_arch_reset_vcpu(CPUState *env);
struct kvm_guest_debug;
struct kvm_debug_exit_arch;
+extern struct fw_cfg_e820_reserve e820_reserve;
+
struct kvm_sw_breakpoint {
target_ulong pc;
target_ulong saved_insn;
Index: qemu-kvm/qemu-kvm-x86.c
===================================================================
--- qemu-kvm.orig/qemu-kvm-x86.c
+++ qemu-kvm/qemu-kvm-x86.c
@@ -23,6 +23,7 @@
#include "kvm.h"
#include "hw/pc.h"
+#include "hw/fw_cfg.h"
#define MSR_IA32_TSC 0x10
@@ -37,6 +38,11 @@ int kvm_set_tss_addr(kvm_context_t kvm,
{
#ifdef KVM_CAP_SET_TSS_ADDR
int r;
+ /*
+ * Tell fw_cfg to notify the BIOS to reserve the range.
+ */
+ e820_reserve.addr = addr;
+ e820_reserve.length = 0x4000;
r = kvm_ioctl(kvm_state, KVM_CHECK_EXTENSION, KVM_CAP_SET_TSS_ADDR);
if (r > 0) {
Index: qemu-kvm/target-i386/kvm.c
===================================================================
--- qemu-kvm.orig/target-i386/kvm.c
+++ qemu-kvm/target-i386/kvm.c
@@ -25,6 +25,8 @@
#include "gdbstub.h"
#include "host-utils.h"
+extern struct fw_cfg_e820_reserve e820_reserve;
+
#ifdef KVM_UPSTREAM
//#define DEBUG_KVM
@@ -298,6 +300,11 @@ int kvm_arch_init(KVMState *s, int smp_c
* as unavaible memory. FIXME, need to ensure the e820 map deals with
* this?
*/
+ /*
+ * Tell fw_cfg to notify the BIOS to reserve the range.
+ */
+ e820_reserve.addr = 0xfffbc000;
+ e820_reserve.length = 0x4000;
return kvm_vm_ioctl(s, KVM_SET_TSS_ADDR, 0xfffbd000);
}
WARNING: multiple messages have this Message-ID (diff)
From: Jes Sorensen <Jes.Sorensen@redhat.com>
To: qemu-devel@nongnu.org
Cc: Anthony Liguori <aliguori@us.ibm.com>,
Kevin O'Connor <kevin@koconnor.net>, Avi Kivity <avi@redhat.com>,
kvm@vger.kernel.org
Subject: [Qemu-devel] [PATCH] QEMU-KVM - provide e820 reserve through qemu_cfg
Date: Mon, 25 Jan 2010 17:49:23 +0100 [thread overview]
Message-ID: <4B5DCB93.7050007@redhat.com> (raw)
In-Reply-To: <4B5DCAF2.3010105@redhat.com>
[-- Attachment #1: Type: text/plain, Size: 100 bytes --]
Hi,
This is the QEMU-KVM bits for providing the e820-reserve space through
qemu-cfg.
Cheers,
Jes
[-- Attachment #2: 0011-qemu-kvm-e820-reserve.patch --]
[-- Type: text/plain, Size: 3549 bytes --]
Use qemu-cfg to notify the BIOS of the location of the TSS range to
reserve in the e820 table, to avoid relying on hard coded values.
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
---
hw/fw_cfg.h | 5 +++++
hw/pc.c | 4 ++++
kvm.h | 2 ++
qemu-kvm-x86.c | 6 ++++++
target-i386/kvm.c | 7 +++++++
5 files changed, 24 insertions(+)
Index: qemu-kvm/hw/fw_cfg.h
===================================================================
--- qemu-kvm.orig/hw/fw_cfg.h
+++ qemu-kvm/hw/fw_cfg.h
@@ -67,4 +67,9 @@ FWCfgState *fw_cfg_init(uint32_t ctl_por
#endif /* NO_QEMU_PROTOS */
+struct fw_cfg_e820_reserve {
+ uint32_t addr;
+ uint32_t length;
+};
+
#endif
Index: qemu-kvm/hw/pc.c
===================================================================
--- qemu-kvm.orig/hw/pc.c
+++ qemu-kvm/hw/pc.c
@@ -66,6 +66,7 @@
#define FW_CFG_ACPI_TABLES (FW_CFG_ARCH_LOCAL + 0)
#define FW_CFG_SMBIOS_ENTRIES (FW_CFG_ARCH_LOCAL + 1)
#define FW_CFG_IRQ0_OVERRIDE (FW_CFG_ARCH_LOCAL + 2)
+#define FW_CFG_E820_RESERVE (FW_CFG_ARCH_LOCAL + 3)
#define MAX_IDE_BUS 2
@@ -73,6 +74,7 @@ static fdctrl_t *floppy_controller;
static RTCState *rtc_state;
static PITState *pit;
static PCII440FXState *i440fx_state;
+struct fw_cfg_e820_reserve e820_reserve;
qemu_irq *ioapic_irq_hack;
@@ -475,6 +477,8 @@ static void *bochs_bios_init(void)
if (smbios_table)
fw_cfg_add_bytes(fw_cfg, FW_CFG_SMBIOS_ENTRIES,
smbios_table, smbios_len);
+ fw_cfg_add_bytes(fw_cfg, FW_CFG_E820_RESERVE, (uint8_t *)&e820_reserve,
+ sizeof(struct fw_cfg_e820_reserve));
/* allocate memory for the NUMA channel: one (64bit) word for the number
* of nodes, one word for each VCPU->node and one word for each node to
Index: qemu-kvm/kvm.h
===================================================================
--- qemu-kvm.orig/kvm.h
+++ qemu-kvm/kvm.h
@@ -101,6 +101,8 @@ void kvm_arch_reset_vcpu(CPUState *env);
struct kvm_guest_debug;
struct kvm_debug_exit_arch;
+extern struct fw_cfg_e820_reserve e820_reserve;
+
struct kvm_sw_breakpoint {
target_ulong pc;
target_ulong saved_insn;
Index: qemu-kvm/qemu-kvm-x86.c
===================================================================
--- qemu-kvm.orig/qemu-kvm-x86.c
+++ qemu-kvm/qemu-kvm-x86.c
@@ -23,6 +23,7 @@
#include "kvm.h"
#include "hw/pc.h"
+#include "hw/fw_cfg.h"
#define MSR_IA32_TSC 0x10
@@ -37,6 +38,11 @@ int kvm_set_tss_addr(kvm_context_t kvm,
{
#ifdef KVM_CAP_SET_TSS_ADDR
int r;
+ /*
+ * Tell fw_cfg to notify the BIOS to reserve the range.
+ */
+ e820_reserve.addr = addr;
+ e820_reserve.length = 0x4000;
r = kvm_ioctl(kvm_state, KVM_CHECK_EXTENSION, KVM_CAP_SET_TSS_ADDR);
if (r > 0) {
Index: qemu-kvm/target-i386/kvm.c
===================================================================
--- qemu-kvm.orig/target-i386/kvm.c
+++ qemu-kvm/target-i386/kvm.c
@@ -25,6 +25,8 @@
#include "gdbstub.h"
#include "host-utils.h"
+extern struct fw_cfg_e820_reserve e820_reserve;
+
#ifdef KVM_UPSTREAM
//#define DEBUG_KVM
@@ -298,6 +300,11 @@ int kvm_arch_init(KVMState *s, int smp_c
* as unavaible memory. FIXME, need to ensure the e820 map deals with
* this?
*/
+ /*
+ * Tell fw_cfg to notify the BIOS to reserve the range.
+ */
+ e820_reserve.addr = 0xfffbc000;
+ e820_reserve.length = 0x4000;
return kvm_vm_ioctl(s, KVM_SET_TSS_ADDR, 0xfffbd000);
}
next prev parent reply other threads:[~2010-01-25 16:49 UTC|newest]
Thread overview: 48+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-01-25 16:46 [PATCH] Seabios - read e820 reserve from qemu_cfg Jes Sorensen
2010-01-25 16:46 ` [Qemu-devel] " Jes Sorensen
2010-01-25 16:49 ` Jes Sorensen [this message]
2010-01-25 16:49 ` [Qemu-devel] [PATCH] QEMU-KVM - provide e820 reserve through qemu_cfg Jes Sorensen
2010-01-25 16:52 ` [PATCH] QEMU " Jes Sorensen
2010-01-25 16:52 ` [Qemu-devel] " Jes Sorensen
2010-01-25 16:58 ` Alexander Graf
2010-01-25 16:58 ` [Qemu-devel] " Alexander Graf
2010-01-25 17:13 ` Jes Sorensen
2010-01-25 17:13 ` [Qemu-devel] " Jes Sorensen
2010-01-25 17:28 ` Alexander Graf
2010-01-25 17:28 ` [Qemu-devel] " Alexander Graf
2010-01-25 17:46 ` Jes Sorensen
2010-01-25 17:46 ` [Qemu-devel] " Jes Sorensen
2010-01-25 20:04 ` Alexander Graf
2010-01-25 20:04 ` [Qemu-devel] " Alexander Graf
2010-01-25 20:14 ` Anthony Liguori
2010-01-25 20:14 ` [Qemu-devel] " Anthony Liguori
2010-01-25 21:05 ` Jes Sorensen
2010-01-25 21:05 ` [Qemu-devel] " Jes Sorensen
2010-01-25 21:08 ` Alexander Graf
2010-01-25 21:08 ` [Qemu-devel] " Alexander Graf
2010-01-25 21:24 ` Jes Sorensen
2010-01-25 21:24 ` [Qemu-devel] " Jes Sorensen
2010-01-26 6:46 ` Gleb Natapov
2010-01-26 6:46 ` [Qemu-devel] " Gleb Natapov
2010-01-26 8:36 ` Jes Sorensen
2010-01-26 8:36 ` [Qemu-devel] " Jes Sorensen
2010-01-26 0:24 ` [PATCH] Seabios - read e820 reserve from qemu_cfg Kevin O'Connor
2010-01-26 0:24 ` [Qemu-devel] " Kevin O'Connor
2010-01-26 21:52 ` [PATCH] Seabios - read e820 table " Jes Sorensen
2010-01-26 21:52 ` [Qemu-devel] " Jes Sorensen
2010-01-26 21:53 ` [PATCH] QEMU-KVM - provide e820 table via fw_cfg Jes Sorensen
2010-01-26 21:53 ` [Qemu-devel] " Jes Sorensen
2010-01-26 21:55 ` Alexander Graf
2010-01-26 21:55 ` [Qemu-devel] " Alexander Graf
2010-01-28 4:39 ` [PATCH] Seabios - read e820 table from qemu_cfg Kevin O'Connor
2010-01-28 4:39 ` [Qemu-devel] " Kevin O'Connor
2010-01-29 9:03 ` Jes Sorensen
2010-01-29 9:03 ` [Qemu-devel] " Jes Sorensen
2010-01-29 16:08 ` Gleb Natapov
2010-01-29 16:08 ` [Qemu-devel] " Gleb Natapov
2010-01-30 3:35 ` Kevin O'Connor
2010-01-30 3:35 ` [Qemu-devel] " Kevin O'Connor
2010-02-08 10:31 ` Jes Sorensen
2010-02-08 10:31 ` [Qemu-devel] " Jes Sorensen
2010-02-14 3:16 ` Kevin O'Connor
2010-02-14 3:16 ` [Qemu-devel] " Kevin O'Connor
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4B5DCB93.7050007@redhat.com \
--to=jes.sorensen@redhat.com \
--cc=aliguori@us.ibm.com \
--cc=avi@redhat.com \
--cc=kevin@koconnor.net \
--cc=kvm@vger.kernel.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.