* Re: [lm-sensors] ATK0110 on ASUS P6T WS Pro (BIOS 0804): CHASSIS3
2010-01-24 10:37 [lm-sensors] ATK0110 on ASUS P6T WS Pro (BIOS 0804): CHASSIS3 FAN Reinhard Nissl
@ 2010-01-24 13:32 ` Luca Tettamanti
2010-01-25 12:58 ` Luca Tettamanti
` (3 subsequent siblings)
4 siblings, 0 replies; 6+ messages in thread
From: Luca Tettamanti @ 2010-01-24 13:32 UTC (permalink / raw)
To: lm-sensors
On Sun, Jan 24, 2010 at 11:37 AM, Reinhard Nissl <rnissl@gmx.de> wrote:
> Hi,
>
> what can I do to make it report the real fan speed like shown in
> the BIOS?
Please send me a copy of the DSDT (/sys/firmware/acpi/tables/DSDT).
Luca
_______________________________________________
lm-sensors mailing list
lm-sensors@lm-sensors.org
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
^ permalink raw reply [flat|nested] 6+ messages in thread* Re: [lm-sensors] ATK0110 on ASUS P6T WS Pro (BIOS 0804): CHASSIS3
2010-01-24 10:37 [lm-sensors] ATK0110 on ASUS P6T WS Pro (BIOS 0804): CHASSIS3 FAN Reinhard Nissl
2010-01-24 13:32 ` [lm-sensors] ATK0110 on ASUS P6T WS Pro (BIOS 0804): CHASSIS3 Luca Tettamanti
@ 2010-01-25 12:58 ` Luca Tettamanti
2010-01-27 20:16 ` Reinhard Nissl
` (2 subsequent siblings)
4 siblings, 0 replies; 6+ messages in thread
From: Luca Tettamanti @ 2010-01-25 12:58 UTC (permalink / raw)
To: lm-sensors
On Sun, Jan 24, 2010 at 3:24 PM, Reinhard Nissl <rnissl@gmx.de> wrote:
> Am 24.01.2010 14:32, schrieb Luca Tettamanti:
>
>>> what can I do to make it report the real fan speed like shown in
>>> the BIOS?
>>
>> Please send me a copy of the DSDT (/sys/firmware/acpi/tables/DSDT).
>
> Attached.
Ok, I don't see the EC so we can rule it out. Both old and new
interfaces are present and both seem functional; the mapping between
the labels and the fan methods is consistent across the interfaces.
A couple of questions:
- which kernel are you using?
- does the BIOS use _exactly_ the same labels as sensors? (e.g. is
chassis printed all in upper case?)
Luca
_______________________________________________
lm-sensors mailing list
lm-sensors@lm-sensors.org
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
^ permalink raw reply [flat|nested] 6+ messages in thread* Re: [lm-sensors] ATK0110 on ASUS P6T WS Pro (BIOS 0804): CHASSIS3
2010-01-24 10:37 [lm-sensors] ATK0110 on ASUS P6T WS Pro (BIOS 0804): CHASSIS3 FAN Reinhard Nissl
2010-01-24 13:32 ` [lm-sensors] ATK0110 on ASUS P6T WS Pro (BIOS 0804): CHASSIS3 Luca Tettamanti
2010-01-25 12:58 ` Luca Tettamanti
@ 2010-01-27 20:16 ` Reinhard Nissl
2010-01-28 12:37 ` Luca Tettamanti
2010-01-31 21:55 ` Reinhard Nissl
4 siblings, 0 replies; 6+ messages in thread
From: Reinhard Nissl @ 2010-01-27 20:16 UTC (permalink / raw)
To: lm-sensors
Hi,
Am 24.01.2010 11:37, schrieb Reinhard Nissl:
> what can I do to make it report the real fan speed like shown in
> the BIOS?
I'm sorry for consuming resources, because the fan speed wasn't
reported in the BIOS either. I recalled that it showed up last
time I was in BIOS but I didn't check it before posting, as the
fan was rotating.
The problem was, that fan voltage was too low and as a result the
board didn't recognize the level of the generated RPM signal.
Increasing fan supply voltage fixed the issue.
Bye.
--
Dipl.-Inform. (FH) Reinhard Nissl
mailto:rnissl@gmx.de
_______________________________________________
lm-sensors mailing list
lm-sensors@lm-sensors.org
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [lm-sensors] ATK0110 on ASUS P6T WS Pro (BIOS 0804): CHASSIS3
2010-01-24 10:37 [lm-sensors] ATK0110 on ASUS P6T WS Pro (BIOS 0804): CHASSIS3 FAN Reinhard Nissl
` (2 preceding siblings ...)
2010-01-27 20:16 ` Reinhard Nissl
@ 2010-01-28 12:37 ` Luca Tettamanti
2010-01-31 21:55 ` Reinhard Nissl
4 siblings, 0 replies; 6+ messages in thread
From: Luca Tettamanti @ 2010-01-28 12:37 UTC (permalink / raw)
To: lm-sensors
On Wed, Jan 27, 2010 at 9:16 PM, Reinhard Nissl <rnissl@gmx.de> wrote:
> Hi,
>
> Am 24.01.2010 11:37, schrieb Reinhard Nissl:
>
>> what can I do to make it report the real fan speed like shown in
>> the BIOS?
>
> I'm sorry for consuming resources, because the fan speed wasn't
> reported in the BIOS either. I recalled that it showed up last
> time I was in BIOS but I didn't check it before posting, as the
> fan was rotating.
>
> The problem was, that fan voltage was too low and as a result the
> board didn't recognize the level of the generated RPM signal.
> Increasing fan supply voltage fixed the issue.
Ok, no problem :-)
Your board is nonetheless interesting because it has both the
interfaces available (and both seems to be working).
If you could check the exact spelling of the labels in the BIOS it
might help me to better understand how the interface is selected.
E.g. does the BIOS display "CPU Fan Speed" or "CPU FAN Speed"?
thanks,
Luca
_______________________________________________
lm-sensors mailing list
lm-sensors@lm-sensors.org
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
^ permalink raw reply [flat|nested] 6+ messages in thread* Re: [lm-sensors] ATK0110 on ASUS P6T WS Pro (BIOS 0804): CHASSIS3
2010-01-24 10:37 [lm-sensors] ATK0110 on ASUS P6T WS Pro (BIOS 0804): CHASSIS3 FAN Reinhard Nissl
` (3 preceding siblings ...)
2010-01-28 12:37 ` Luca Tettamanti
@ 2010-01-31 21:55 ` Reinhard Nissl
4 siblings, 0 replies; 6+ messages in thread
From: Reinhard Nissl @ 2010-01-31 21:55 UTC (permalink / raw)
To: lm-sensors
Hi,
Am 28.01.2010 13:37, schrieb Luca Tettamanti:
> Your board is nonetheless interesting because it has both the
> interfaces available (and both seems to be working).
> If you could check the exact spelling of the labels in the BIOS it
> might help me to better understand how the interface is selected.
> E.g. does the BIOS display "CPU Fan Speed" or "CPU FAN Speed"?
CPU Fan Speed
Chassis Fan 1 Speed
Chassis Fan 2 Speed
Chassis Fan 3 Speed
Power Fan Speed
Bye.
--
Dipl.-Inform. (FH) Reinhard Nissl
mailto:rnissl@gmx.de
_______________________________________________
lm-sensors mailing list
lm-sensors@lm-sensors.org
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
^ permalink raw reply [flat|nested] 6+ messages in thread