(no subject)

(no subject)

["Alexander Jölly"]

hi,

i tried to install debian squeeze on an intel s3210 mainboard with an areca arc-1222 hardware raid-controller, but after install the system will not boot;
grub stops after:

GRUB loading..
Welcome to GRUB!

i have more of these servers, and upgrading from debian lenny to squeeze or a fresh install dont work on any of them;
what could be the problem here?
how can i troubleshoot this?

partitions:
/dev/sda1 /boot 100mb
/dev/sda2 /swap 8gb
/dev/sda3 /     300gb
/dev/sda4 /srv  4tb

thx,
alex
-- 
NEU: Mit GMX DSL über 1000,- ¿ sparen!
http://portal.gmx.net/de/go/dsl02

Re: (no subject)

[Vladimir 'φ-coder/phcoder' Serbinenko]

[-- Attachment #1: Type: text/plain, Size: 819 bytes --]

Alexander Jölly wrote:
> hi,
>
> i tried to install debian squeeze on an intel s3210 mainboard with an areca arc-1222 hardware raid-controller, but after install the system will not boot;
> grub stops after:
>
> GRUB loading..
> Welcome to GRUB!
>
>   
Do you have access to grub rescue prompt?
The best way to debug this is to add printfs in grub code. If you
installed grub correctly it's probably a firmware bug.
> i have more of these servers, and upgrading from debian lenny to squeeze or a fresh install dont work on any of them;
> what could be the problem here?
> how can i troubleshoot this?
>
> partitions:
> /dev/sda1 /boot 100mb
> /dev/sda2 /swap 8gb
> /dev/sda3 /     300gb
> /dev/sda4 /srv  4tb
>
> thx,
> alex
>   


-- 
Regards
Vladimir 'φ-coder/phcoder' Serbinenko



[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 293 bytes --]

Re: Bug#570960: grub-pc: grub2 not working on lenny and squeeze after fresh install

[Vladimir 'φ-coder/phcoder' Serbinenko]

[-- Attachment #1: Type: text/plain, Size: 683 bytes --]

Alexander Jölly wrote:
> hi,
>
> i tried to install debian squeeze on an intel s3210 mainboard with an areca arc-1222 hardware raid-controller, but after install the system will not boot;
> grub stops after:
>
> GRUB loading..
> Welcome to GRUB!
>   
> i have more of these servers, and upgrading from debian lenny to squeeze or a fresh install dont work on any of them;
> what could be the problem here?
>   
I wrote instructions here
> how can i troubleshoot this?
>
> partitions:
> /dev/sda1 /boot 100mb
> /dev/sda2 /swap 8gb
> /dev/sda3 /     300gb
> /dev/sda4 /srv  4tb
>
> thx,
> alex
>   


-- 
Regards
Vladimir 'φ-coder/phcoder' Serbinenko



[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 293 bytes --]