From: Anthony Liguori <anthony@codemonkey.ws>
To: "Michael S. Tsirkin" <mst@redhat.com>
Cc: amit.shah@redhat.com, quintela@redhat.com, qemu-devel@nongnu.org,
kraxel@redhat.com
Subject: [Qemu-devel] Re: [PATCHv2 09/12] vhost: vhost net support
Date: Thu, 25 Feb 2010 13:44:34 -0600 [thread overview]
Message-ID: <4B86D322.3020909@codemonkey.ws> (raw)
In-Reply-To: <af686d9630f18829e4e2ba1333a198efea1126b6.1267122331.git.mst@redhat.com>
On 02/25/2010 12:28 PM, Michael S. Tsirkin wrote:
> This adds vhost net device support in qemu. Will be tied to tap device
> and virtio by following patches. Raw backend is currently missing,
> will be worked on/submitted separately.
>
> Signed-off-by: Michael S. Tsirkin<mst@redhat.com>
> ---
> Makefile.target | 2 +
> configure | 21 ++
> hw/vhost.c | 631 +++++++++++++++++++++++++++++++++++++++++++++++++++++++
> hw/vhost.h | 44 ++++
> hw/vhost_net.c | 177 ++++++++++++++++
> hw/vhost_net.h | 20 ++
> 6 files changed, 895 insertions(+), 0 deletions(-)
> create mode 100644 hw/vhost.c
> create mode 100644 hw/vhost.h
> create mode 100644 hw/vhost_net.c
> create mode 100644 hw/vhost_net.h
>
> diff --git a/Makefile.target b/Makefile.target
> index c1580e9..9b4fd84 100644
> --- a/Makefile.target
> +++ b/Makefile.target
> @@ -174,6 +174,8 @@ obj-y = vl.o async.o monitor.o pci.o pci_host.o pcie_host.o machine.o gdbstub.o
> # need to fix this properly
> obj-y += virtio-blk.o virtio-balloon.o virtio-net.o virtio-pci.o virtio-serial-bus.o
> obj-y += notifier.o
> +obj-y += vhost_net.o
> +obj-$(CONFIG_VHOST_NET) += vhost.o
> obj-y += rwhandler.o
> obj-$(CONFIG_KVM) += kvm.o kvm-all.o
> obj-$(CONFIG_ISA_MMIO) += isa_mmio.o
> diff --git a/configure b/configure
> index 8eb5f5b..5eccc7c 100755
> --- a/configure
> +++ b/configure
> @@ -1498,6 +1498,23 @@ EOF
> fi
>
> ##########################################
> +# test for vhost net
> +
> +if test "$kvm" != "no"; then
> + cat> $TMPC<<EOF
> +#include<linux/vhost.h>
> +int main(void) { return 0; }
> +EOF
> + if compile_prog "$kvm_cflags" "" ; then
> + vhost_net=yes
> + else
> + vhost_net=no
> + fi
> +else
> + vhost_net=no
> +fi
> +
> +##########################################
> # pthread probe
> PTHREADLIBS_LIST="-lpthread -lpthreadGC2"
>
> @@ -1968,6 +1985,7 @@ echo "fdt support $fdt"
> echo "preadv support $preadv"
> echo "fdatasync $fdatasync"
> echo "uuid support $uuid"
> +echo "vhost-net support $vhost_net"
>
> if test $sdl_too_old = "yes"; then
> echo "-> Your SDL version is too old - please upgrade to have SDL support"
> @@ -2492,6 +2510,9 @@ case "$target_arch2" in
> if test "$kvm_para" = "yes"; then
> echo "CONFIG_KVM_PARA=y">> $config_target_mak
> fi
> + if test $vhost_net = "yes" ; then
> + echo "CONFIG_VHOST_NET=y">> $config_target_mak
> + fi
> fi
> esac
> echo "TARGET_PHYS_ADDR_BITS=$target_phys_bits">> $config_target_mak
> diff --git a/hw/vhost.c b/hw/vhost.c
> new file mode 100644
> index 0000000..4d5ea02
> --- /dev/null
> +++ b/hw/vhost.c
>
Needs copyright/license.
> @@ -0,0 +1,631 @@
> +#include "linux/vhost.h"
> +#include<sys/ioctl.h>
> +#include<sys/eventfd.h>
> +#include "vhost.h"
> +#include "hw/hw.h"
> +/* For range_get_last */
> +#include "pci.h"
> +
> +static void vhost_dev_sync_region(struct vhost_dev *dev,
> + uint64_t mfirst, uint64_t mlast,
> + uint64_t rfirst, uint64_t rlast)
> +{
> + uint64_t start = MAX(mfirst, rfirst);
> + uint64_t end = MIN(mlast, rlast);
> + vhost_log_chunk_t *from = dev->log + start / VHOST_LOG_CHUNK;
> + vhost_log_chunk_t *to = dev->log + end / VHOST_LOG_CHUNK + 1;
> + uint64_t addr = (start / VHOST_LOG_CHUNK) * VHOST_LOG_CHUNK;
> +
> + assert(end / VHOST_LOG_CHUNK< dev->log_size);
> + assert(start / VHOST_LOG_CHUNK< dev->log_size);
> + if (end< start) {
> + return;
> + }
> + for (;from< to; ++from) {
> + vhost_log_chunk_t log;
> + int bit;
> + /* We first check with non-atomic: much cheaper,
> + * and we expect non-dirty to be the common case. */
> + if (!*from) {
> + continue;
> + }
> + /* Data must be read atomically. We don't really
> + * need the barrier semantics of __sync
> + * builtins, but it's easier to use them than
> + * roll our own. */
> + log = __sync_fetch_and_and(from, 0);
>
Is this too non-portable for us?
Technically speaking, it would be better to use qemu address types
instead of uint64_t.
> + while ((bit = sizeof(log)> sizeof(int) ?
> + ffsll(log) : ffs(log))) {
> + bit -= 1;
> + cpu_physical_memory_set_dirty(addr + bit * VHOST_LOG_PAGE);
> + log&= ~(0x1ull<< bit);
> + }
> + addr += VHOST_LOG_CHUNK;
> + }
> +}
> +
> +static int vhost_client_sync_dirty_bitmap(struct CPUPhysMemoryClient *client,
> + target_phys_addr_t start_addr,
> + target_phys_addr_t end_addr)
>
The 'struct' shouldn't be needed...
> +{
> + struct vhost_dev *dev = container_of(client, struct vhost_dev, client);
> + int i;
> + if (!dev->log_enabled || !dev->started) {
> + return 0;
> + }
> + for (i = 0; i< dev->mem->nregions; ++i) {
> + struct vhost_memory_region *reg = dev->mem->regions + i;
> + vhost_dev_sync_region(dev, start_addr, end_addr,
> + reg->guest_phys_addr,
> + range_get_last(reg->guest_phys_addr,
> + reg->memory_size));
> + }
> + for (i = 0; i< dev->nvqs; ++i) {
> + struct vhost_virtqueue *vq = dev->vqs + i;
> + unsigned size = offsetof(struct vring_used, ring) +
> + sizeof(struct vring_used_elem) * vq->num;
> + vhost_dev_sync_region(dev, start_addr, end_addr, vq->used_phys,
> + range_get_last(vq->used_phys, size));
> + }
> + return 0;
> +}
> +
> +/* Assign/unassign. Keep an unsorted array of non-overlapping
> + * memory regions in dev->mem. */
> +static void vhost_dev_unassign_memory(struct vhost_dev *dev,
> + uint64_t start_addr,
> + uint64_t size)
> +{
> + int from, to, n = dev->mem->nregions;
> + /* Track overlapping/split regions for sanity checking. */
> + int overlap_start = 0, overlap_end = 0, overlap_middle = 0, split = 0;
> +
> + for (from = 0, to = 0; from< n; ++from, ++to) {
> + struct vhost_memory_region *reg = dev->mem->regions + to;
> + uint64_t reglast;
> + uint64_t memlast;
> + uint64_t change;
> +
> + /* clone old region */
> + if (to != from) {
> + memcpy(reg, dev->mem->regions + from, sizeof *reg);
> + }
> +
> + /* No overlap is simple */
> + if (!ranges_overlap(reg->guest_phys_addr, reg->memory_size,
> + start_addr, size)) {
> + continue;
> + }
> +
> + /* Split only happens if supplied region
> + * is in the middle of an existing one. Thus it can not
> + * overlap with any other existing region. */
> + assert(!split);
> +
> + reglast = range_get_last(reg->guest_phys_addr, reg->memory_size);
> + memlast = range_get_last(start_addr, size);
> +
> + /* Remove whole region */
> + if (start_addr<= reg->guest_phys_addr&& memlast>= reglast) {
> + --dev->mem->nregions;
> + --to;
> + assert(to>= 0);
> + ++overlap_middle;
> + continue;
> + }
> +
> + /* Shrink region */
> + if (memlast>= reglast) {
> + reg->memory_size = start_addr - reg->guest_phys_addr;
> + assert(reg->memory_size);
> + assert(!overlap_end);
> + ++overlap_end;
> + continue;
> + }
> +
> + /* Shift region */
> + if (start_addr<= reg->guest_phys_addr) {
> + change = memlast + 1 - reg->guest_phys_addr;
> + reg->memory_size -= change;
> + reg->guest_phys_addr += change;
> + reg->userspace_addr += change;
> + assert(reg->memory_size);
> + assert(!overlap_start);
> + ++overlap_start;
> + continue;
> + }
> +
> + /* This only happens if supplied region
> + * is in the middle of an existing one. Thus it can not
> + * overlap with any other existing region. */
> + assert(!overlap_start);
> + assert(!overlap_end);
> + assert(!overlap_middle);
> + /* Split region: shrink first part, shift second part. */
> + memcpy(dev->mem->regions + n, reg, sizeof *reg);
> + reg->memory_size = start_addr - reg->guest_phys_addr;
> + assert(reg->memory_size);
> + change = memlast + 1 - reg->guest_phys_addr;
> + reg = dev->mem->regions + n;
> + reg->memory_size -= change;
> + assert(reg->memory_size);
> + reg->guest_phys_addr += change;
> + reg->userspace_addr += change;
> + /* Never add more than 1 region */
> + assert(dev->mem->nregions == n);
> + ++dev->mem->nregions;
> + ++split;
> + }
> +}
>
This code is basically replicating the code in kvm-all with respect to
translating qemu ram registrations into a list of non-overlapping
slots. We should commonize the code and perhaps even change the
notification API to deal with non-overlapping slots since that's what
users seem to want.
> +
> +/* Called after unassign, so no regions overlap the given range. */
> +static void vhost_dev_assign_memory(struct vhost_dev *dev,
> + uint64_t start_addr,
> + uint64_t size,
> + uint64_t uaddr)
> +{
> + int from, to;
> + struct vhost_memory_region *merged = NULL;
> + for (from = 0, to = 0; from< dev->mem->nregions; ++from, ++to) {
> + struct vhost_memory_region *reg = dev->mem->regions + to;
> + uint64_t prlast, urlast;
> + uint64_t pmlast, umlast;
> + uint64_t s, e, u;
> +
> + /* clone old region */
> + if (to != from) {
> + memcpy(reg, dev->mem->regions + from, sizeof *reg);
> + }
> + prlast = range_get_last(reg->guest_phys_addr, reg->memory_size);
> + pmlast = range_get_last(start_addr, size);
> + urlast = range_get_last(reg->userspace_addr, reg->memory_size);
> + umlast = range_get_last(uaddr, size);
> +
> + /* check for overlapping regions: should never happen. */
> + assert(prlast< start_addr || pmlast< reg->guest_phys_addr);
> + /* Not an adjacent or overlapping region - do not merge. */
> + if ((prlast + 1 != start_addr || urlast + 1 != uaddr)&&
> + (pmlast + 1 != reg->guest_phys_addr ||
> + umlast + 1 != reg->userspace_addr)) {
> + continue;
> + }
> +
> + if (merged) {
> + --to;
> + assert(to>= 0);
> + } else {
> + merged = reg;
> + }
> + u = MIN(uaddr, reg->userspace_addr);
> + s = MIN(start_addr, reg->guest_phys_addr);
> + e = MAX(pmlast, prlast);
> + uaddr = merged->userspace_addr = u;
> + start_addr = merged->guest_phys_addr = s;
> + size = merged->memory_size = e - s + 1;
> + assert(merged->memory_size);
> + }
> +
> + if (!merged) {
> + struct vhost_memory_region *reg = dev->mem->regions + to;
> + memset(reg, 0, sizeof *reg);
> + reg->memory_size = size;
> + assert(reg->memory_size);
> + reg->guest_phys_addr = start_addr;
> + reg->userspace_addr = uaddr;
> + ++to;
> + }
> + assert(to<= dev->mem->nregions + 1);
> + dev->mem->nregions = to;
> +}
>
See above. Unifying the two bits of code is important IMHO because we
had an unending supply of bugs with the code in kvm-all it seems.
> +static uint64_t vhost_get_log_size(struct vhost_dev *dev)
> +{
> + uint64_t log_size = 0;
> + int i;
> + for (i = 0; i< dev->mem->nregions; ++i) {
> + struct vhost_memory_region *reg = dev->mem->regions + i;
> + uint64_t last = range_get_last(reg->guest_phys_addr,
> + reg->memory_size);
> + log_size = MAX(log_size, last / VHOST_LOG_CHUNK + 1);
> + }
> + for (i = 0; i< dev->nvqs; ++i) {
> + struct vhost_virtqueue *vq = dev->vqs + i;
> + uint64_t last = vq->used_phys +
> + offsetof(struct vring_used, ring) +
> + sizeof(struct vring_used_elem) * vq->num - 1;
> + log_size = MAX(log_size, last / VHOST_LOG_CHUNK + 1);
> + }
> + return log_size;
> +}
> +
> +static inline void vhost_dev_log_resize(struct vhost_dev* dev, uint64_t size)
> +{
> + vhost_log_chunk_t *log;
> + uint64_t log_base;
> + int r;
> + if (size) {
> + log = qemu_mallocz(size * sizeof *log);
> + } else {
> + log = NULL;
> + }
> + log_base = (uint64_t)(unsigned long)log;
> + r = ioctl(dev->control, VHOST_SET_LOG_BASE,&log_base);
> + assert(r>= 0);
> + vhost_client_sync_dirty_bitmap(&dev->client, 0,
> + (target_phys_addr_t)~0x0ull);
> + if (dev->log) {
> + qemu_free(dev->log);
> + }
> + dev->log = log;
> + dev->log_size = size;
> +}
> +
> +static void vhost_client_set_memory(CPUPhysMemoryClient *client,
> + target_phys_addr_t start_addr,
> + ram_addr_t size,
> + ram_addr_t phys_offset)
> +{
> + struct vhost_dev *dev = container_of(client, struct vhost_dev, client);
> + ram_addr_t flags = phys_offset& ~TARGET_PAGE_MASK;
> + int s = offsetof(struct vhost_memory, regions) +
> + (dev->mem->nregions + 1) * sizeof dev->mem->regions[0];
> + uint64_t log_size;
> + int r;
> + dev->mem = qemu_realloc(dev->mem, s);
> +
> + assert(size);
> +
> + vhost_dev_unassign_memory(dev, start_addr, size);
> + if (flags == IO_MEM_RAM) {
> + /* Add given mapping, merging adjacent regions if any */
> + vhost_dev_assign_memory(dev, start_addr, size,
> + (uintptr_t)qemu_get_ram_ptr(phys_offset));
> + } else {
> + /* Remove old mapping for this memory, if any. */
> + vhost_dev_unassign_memory(dev, start_addr, size);
> + }
> +
> + if (!dev->started) {
> + return;
> + }
> + if (!dev->log_enabled) {
> + r = ioctl(dev->control, VHOST_SET_MEM_TABLE, dev->mem);
> + assert(r>= 0);
> + return;
> + }
> + log_size = vhost_get_log_size(dev);
> + /* We allocate an extra 4K bytes to log,
> + * to reduce the * number of reallocations. */
> +#define VHOST_LOG_BUFFER (0x1000 / sizeof *dev->log)
> + /* To log more, must increase log size before table update. */
> + if (dev->log_size< log_size) {
> + vhost_dev_log_resize(dev, log_size + VHOST_LOG_BUFFER);
> + }
> + r = ioctl(dev->control, VHOST_SET_MEM_TABLE, dev->mem);
> + assert(r>= 0);
> + /* To log less, can only decrease log size after table update. */
> + if (dev->log_size> log_size + VHOST_LOG_BUFFER) {
> + vhost_dev_log_resize(dev, log_size);
> + }
> +}
> +
> +static int vhost_virtqueue_set_addr(struct vhost_dev *dev,
> + struct vhost_virtqueue *vq,
> + unsigned idx, bool enable_log)
> +{
> + struct vhost_vring_addr addr = {
> + .index = idx,
> + .desc_user_addr = (u_int64_t)(unsigned long)vq->desc,
> + .avail_user_addr = (u_int64_t)(unsigned long)vq->avail,
> + .used_user_addr = (u_int64_t)(unsigned long)vq->used,
> + .log_guest_addr = vq->used_phys,
> + .flags = enable_log ? (1<< VHOST_VRING_F_LOG) : 0,
> + };
> + int r = ioctl(dev->control, VHOST_SET_VRING_ADDR,&addr);
> + if (r< 0) {
> + return -errno;
> + }
> + return 0;
> +}
> +
> +static int vhost_dev_set_features(struct vhost_dev *dev, bool enable_log)
> +{
> + uint64_t features = dev->acked_features;
> + int r;
> + if (enable_log) {
> + features |= 0x1<< VHOST_F_LOG_ALL;
> + }
> + r = ioctl(dev->control, VHOST_SET_FEATURES,&features);
> + return r< 0 ? -errno : 0;
> +}
> +
> +static int vhost_dev_set_log(struct vhost_dev *dev, bool enable_log)
> +{
> + int r, t, i;
> + r = vhost_dev_set_features(dev, enable_log);
> + if (r< 0)
> + goto err_features;
>
Coding Style is off with single line ifs.
> + for (i = 0; i< dev->nvqs; ++i) {
>
C++ habits die hard :-)
> + r = vhost_virtqueue_set_addr(dev, dev->vqs + i, i,
> + enable_log);
> + if (r< 0)
> + goto err_vq;
> + }
> + return 0;
> +err_vq:
> + for (; i>= 0; --i) {
> + t = vhost_virtqueue_set_addr(dev, dev->vqs + i, i,
> + dev->log_enabled);
> + assert(t>= 0);
> + }
> + t = vhost_dev_set_features(dev, dev->log_enabled);
> + assert(t>= 0);
> +err_features:
> + return r;
> +}
> +
> +static int vhost_client_migration_log(struct CPUPhysMemoryClient *client,
> + int enable)
> +{
> + struct vhost_dev *dev = container_of(client, struct vhost_dev, client);
> + int r;
> + if (!!enable == dev->log_enabled) {
> + return 0;
> + }
> + if (!dev->started) {
> + dev->log_enabled = enable;
> + return 0;
> + }
> + if (!enable) {
> + r = vhost_dev_set_log(dev, false);
> + if (r< 0) {
> + return r;
> + }
> + if (dev->log) {
> + qemu_free(dev->log);
> + }
> + dev->log = NULL;
> + dev->log_size = 0;
> + } else {
> + vhost_dev_log_resize(dev, vhost_get_log_size(dev));
> + r = vhost_dev_set_log(dev, true);
> + if (r< 0) {
> + return r;
> + }
> + }
> + dev->log_enabled = enable;
> + return 0;
> +}
> +
> +static int vhost_virtqueue_init(struct vhost_dev *dev,
> + struct VirtIODevice *vdev,
> + struct vhost_virtqueue *vq,
> + unsigned idx)
> +{
> + target_phys_addr_t s, l, a;
> + int r;
> + struct vhost_vring_file file = {
> + .index = idx,
> + };
> + struct vhost_vring_state state = {
> + .index = idx,
> + };
> + struct VirtQueue *q = virtio_queue(vdev, idx);
> +
> + vq->num = state.num = virtio_queue_get_num(vdev, idx);
> + r = ioctl(dev->control, VHOST_SET_VRING_NUM,&state);
> + if (r) {
> + return -errno;
> + }
> +
> + state.num = virtio_queue_last_avail_idx(vdev, idx);
> + r = ioctl(dev->control, VHOST_SET_VRING_BASE,&state);
> + if (r) {
> + return -errno;
> + }
> +
> + s = l = sizeof(struct vring_desc) * vq->num;
> + a = virtio_queue_get_desc(vdev, idx);
> + vq->desc = cpu_physical_memory_map(a,&l, 0);
> + if (!vq->desc || l != s) {
> + r = -ENOMEM;
> + goto fail_alloc;
> + }
> + s = l = offsetof(struct vring_avail, ring) +
> + sizeof(u_int64_t) * vq->num;
> + a = virtio_queue_get_avail(vdev, idx);
> + vq->avail = cpu_physical_memory_map(a,&l, 0);
> + if (!vq->avail || l != s) {
> + r = -ENOMEM;
> + goto fail_alloc;
> + }
>
You don't unmap avail/desc on failure. map() may fail because the ring
cross MMIO memory and you run out of a bounce buffer.
IMHO, it would be better to attempt to map the full ring at once and
then if that doesn't succeed, bail out. You can still pass individual
pointers via vhost ioctls but within qemu, it's much easier to deal with
the whole ring at a time.
> + s = l = offsetof(struct vring_used, ring) +
> + sizeof(struct vring_used_elem) * vq->num;
>
This is unfortunate. We redefine this structures in qemu to avoid
depending on Linux headers. But you're using the linux versions instead
of the qemu versions. Is it really necessary for vhost.h to include
virtio.h?
> + vq->used_phys = a = virtio_queue_get_used(vdev, idx);
> + vq->used = cpu_physical_memory_map(a,&l, 1);
> + if (!vq->used || l != s) {
> + r = -ENOMEM;
> + goto fail_alloc;
> + }
> +
> + r = vhost_virtqueue_set_addr(dev, vq, idx, dev->log_enabled);
> + if (r< 0) {
> + r = -errno;
> + goto fail_alloc;
> + }
> + if (!vdev->binding->guest_notifier || !vdev->binding->host_notifier) {
> + fprintf(stderr, "binding does not support irqfd/queuefd\n");
> + r = -ENOSYS;
> + goto fail_alloc;
> + }
> + r = vdev->binding->guest_notifier(vdev->binding_opaque, idx, true);
> + if (r< 0) {
> + fprintf(stderr, "Error binding guest notifier: %d\n", -r);
> + goto fail_guest_notifier;
> + }
> +
> + r = vdev->binding->host_notifier(vdev->binding_opaque, idx, true);
> + if (r< 0) {
> + fprintf(stderr, "Error binding host notifier: %d\n", -r);
> + goto fail_host_notifier;
> + }
> +
> + file.fd = event_notifier_get_fd(virtio_queue_host_notifier(q));
> + r = ioctl(dev->control, VHOST_SET_VRING_KICK,&file);
> + if (r) {
> + goto fail_kick;
> + }
> +
> + file.fd = event_notifier_get_fd(virtio_queue_guest_notifier(q));
> + r = ioctl(dev->control, VHOST_SET_VRING_CALL,&file);
> + if (r) {
> + goto fail_call;
> + }
>
This function would be a bit more reasonable if it were split into
sections FWIW.
> + return 0;
> +
> +fail_call:
> +fail_kick:
> + vdev->binding->host_notifier(vdev->binding_opaque, idx, false);
> +fail_host_notifier:
> + vdev->binding->guest_notifier(vdev->binding_opaque, idx, false);
> +fail_guest_notifier:
> +fail_alloc:
> + return r;
> +}
> +
> +static void vhost_virtqueue_cleanup(struct vhost_dev *dev,
> + struct VirtIODevice *vdev,
> + struct vhost_virtqueue *vq,
> + unsigned idx)
> +{
> + struct vhost_vring_state state = {
> + .index = idx,
> + };
> + int r;
> + r = vdev->binding->guest_notifier(vdev->binding_opaque, idx, false);
> + if (r< 0) {
> + fprintf(stderr, "vhost VQ %d guest cleanup failed: %d\n", idx, r);
> + fflush(stderr);
> + }
> + assert (r>= 0);
> +
> + r = vdev->binding->host_notifier(vdev->binding_opaque, idx, false);
> + if (r< 0) {
> + fprintf(stderr, "vhost VQ %d host cleanup failed: %d\n", idx, r);
> + fflush(stderr);
> + }
> + assert (r>= 0);
> + r = ioctl(dev->control, VHOST_GET_VRING_BASE,&state);
> + if (r< 0) {
> + fprintf(stderr, "vhost VQ %d ring restore failed: %d\n", idx, r);
> + fflush(stderr);
> + }
> + virtio_queue_set_last_avail_idx(vdev, idx, state.num);
> + assert (r>= 0);
>
You never unmap() the mapped memory and you're cheating by assuming that
the virtio rings have a constant mapping for the life time of a guest.
That's not technically true. My concern is that since a guest can
trigger remappings (by adjusting PCI mappings) badness can ensue.
> diff --git a/hw/vhost_net.c b/hw/vhost_net.c
> new file mode 100644
> index 0000000..06b7648
>
Need copyright/license.
> --- /dev/null
> +++ b/hw/vhost_net.c
> @@ -0,0 +1,177 @@
> +#include "net.h"
> +#include "net/tap.h"
> +
> +#include "virtio-net.h"
> +#include "vhost_net.h"
> +
> +#include "config.h"
> +
> +#ifdef CONFIG_VHOST_NET
> +#include<sys/eventfd.h>
> +#include<sys/socket.h>
> +#include<linux/kvm.h>
> +#include<fcntl.h>
> +#include<sys/ioctl.h>
> +#include<linux/virtio_ring.h>
> +#include<netpacket/packet.h>
> +#include<net/ethernet.h>
> +#include<net/if.h>
> +#include<netinet/in.h>
> +
> +#include<stdio.h>
> +
> +#include "vhost.h"
> +
> +struct vhost_net {
>
VHostNetState.
> + struct vhost_dev dev;
> + struct vhost_virtqueue vqs[2];
> + int backend;
> + VLANClientState *vc;
> +};
> +
> +unsigned vhost_net_get_features(struct vhost_net *net, unsigned features)
> +{
> + /* Clear features not supported by host kernel. */
> + if (!(net->dev.features& (1<< VIRTIO_F_NOTIFY_ON_EMPTY)))
> + features&= ~(1<< VIRTIO_F_NOTIFY_ON_EMPTY);
> + if (!(net->dev.features& (1<< VIRTIO_RING_F_INDIRECT_DESC)))
> + features&= ~(1<< VIRTIO_RING_F_INDIRECT_DESC);
> + if (!(net->dev.features& (1<< VIRTIO_NET_F_MRG_RXBUF)))
> + features&= ~(1<< VIRTIO_NET_F_MRG_RXBUF);
> + return features;
> +}
> +
> +void vhost_net_ack_features(struct vhost_net *net, unsigned features)
> +{
> + net->dev.acked_features = net->dev.backend_features;
> + if (features& (1<< VIRTIO_F_NOTIFY_ON_EMPTY))
> + net->dev.acked_features |= (1<< VIRTIO_F_NOTIFY_ON_EMPTY);
> + if (features& (1<< VIRTIO_RING_F_INDIRECT_DESC))
> + net->dev.acked_features |= (1<< VIRTIO_RING_F_INDIRECT_DESC);
> +}
> +
> +static int vhost_net_get_fd(VLANClientState *backend)
> +{
> + switch (backend->info->type) {
> + case NET_CLIENT_TYPE_TAP:
> + return tap_get_fd(backend);
> + default:
> + fprintf(stderr, "vhost-net requires tap backend\n");
> + return -EBADFD;
> + }
> +}
> +
> +struct vhost_net *vhost_net_init(VLANClientState *backend, int devfd)
> +{
> + int r;
> + struct vhost_net *net = qemu_malloc(sizeof *net);
> + if (!backend) {
> + fprintf(stderr, "vhost-net requires backend to be setup\n");
> + goto fail;
> + }
> + r = vhost_net_get_fd(backend);
> + if (r< 0)
> + goto fail;
> + net->vc = backend;
> + net->dev.backend_features = tap_has_vnet_hdr(backend) ? 0 :
> + (1<< VHOST_NET_F_VIRTIO_NET_HDR);
> + net->backend = r;
> +
> + r = vhost_dev_init(&net->dev, devfd);
> + if (r< 0)
> + goto fail;
> + if (~net->dev.features& net->dev.backend_features) {
> + fprintf(stderr, "vhost lacks feature mask %llu for backend\n",
> + ~net->dev.features& net->dev.backend_features);
> + vhost_dev_cleanup(&net->dev);
> + goto fail;
> + }
> +
> + /* Set sane init value. Override when guest acks. */
> + vhost_net_ack_features(net, 0);
> + return net;
> +fail:
> + qemu_free(net);
> + return NULL;
> +}
> +
> +int vhost_net_start(struct vhost_net *net,
> + VirtIODevice *dev)
> +{
> + struct vhost_vring_file file = { };
> + int r;
> +
> + net->dev.nvqs = 2;
> + net->dev.vqs = net->vqs;
> + r = vhost_dev_start(&net->dev, dev);
> + if (r< 0)
> + return r;
> +
> + net->vc->info->poll(net->vc, false);
> + qemu_set_fd_handler(net->backend, NULL, NULL, NULL);
> + file.fd = net->backend;
> + for (file.index = 0; file.index< net->dev.nvqs; ++file.index) {
> + r = ioctl(net->dev.control, VHOST_NET_SET_BACKEND,&file);
> + if (r< 0) {
> + r = -errno;
> + goto fail;
> + }
> + }
> + return 0;
> +fail:
> + file.fd = -1;
> + while (--file.index>= 0) {
> + int r = ioctl(net->dev.control, VHOST_NET_SET_BACKEND,&file);
> + assert(r>= 0);
> + }
> + net->vc->info->poll(net->vc, true);
> + vhost_dev_stop(&net->dev, dev);
> + return r;
> +}
> +
> +void vhost_net_stop(struct vhost_net *net,
> + VirtIODevice *dev)
> +{
> + struct vhost_vring_file file = { .fd = -1 };
> +
> + for (file.index = 0; file.index< net->dev.nvqs; ++file.index) {
> + int r = ioctl(net->dev.control, VHOST_NET_SET_BACKEND,&file);
> + assert(r>= 0);
> + }
> + net->vc->info->poll(net->vc, true);
> + vhost_dev_stop(&net->dev, dev);
> +}
> +
> +void vhost_net_cleanup(struct vhost_net *net)
> +{
> + vhost_dev_cleanup(&net->dev);
> + qemu_free(net);
> +}
> +#else
>
If you're going this way, I'd suggest making static inlines in the
header file instead of polluting the C file. It's more common to search
within a C file and having two declarations can get annoying.
Regards,
Anthony Liguori
> +struct vhost_net *vhost_net_init(VLANClientState *backend, int devfd)
> +{
> + return NULL;
> +}
> +
> +int vhost_net_start(struct vhost_net *net,
> + VirtIODevice *dev)
> +{
> + return -ENOSYS;
> +}
> +void vhost_net_stop(struct vhost_net *net,
> + VirtIODevice *dev)
> +{
> +}
> +
> +void vhost_net_cleanup(struct vhost_net *net)
> +{
> +}
> +
> +unsigned vhost_net_get_features(struct vhost_net *net, unsigned features)
> +{
> + return features;
> +}
> +void vhost_net_ack_features(struct vhost_net *net, unsigned features)
> +{
> +}
> +#endif
> diff --git a/hw/vhost_net.h b/hw/vhost_net.h
> new file mode 100644
> index 0000000..2a10210
> --- /dev/null
> +++ b/hw/vhost_net.h
> @@ -0,0 +1,20 @@
> +#ifndef VHOST_NET_H
> +#define VHOST_NET_H
> +
> +#include "net.h"
> +
> +struct vhost_net;
> +
> +struct vhost_net *vhost_net_init(VLANClientState *backend, int devfd);
> +
> +int vhost_net_start(struct vhost_net *net,
> + VirtIODevice *dev);
> +void vhost_net_stop(struct vhost_net *net,
> + VirtIODevice *dev);
> +
> +void vhost_net_cleanup(struct vhost_net *net);
> +
> +unsigned vhost_net_get_features(struct vhost_net *net, unsigned features);
> +void vhost_net_ack_features(struct vhost_net *net, unsigned features);
> +
> +#endif
>
next prev parent reply other threads:[~2010-02-25 19:44 UTC|newest]
Thread overview: 70+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-02-25 18:27 [Qemu-devel] [PATCHv2 00/12] vhost-net: upstream integration Michael S. Tsirkin
2010-02-25 18:27 ` [Qemu-devel] [PATCHv2 05/12] virtio: add APIs for queue fields Michael S. Tsirkin
2010-02-25 18:49 ` Blue Swirl
2010-02-26 14:53 ` Michael S. Tsirkin
2010-02-25 19:25 ` [Qemu-devel] " Anthony Liguori
2010-02-26 8:46 ` Gleb Natapov
2010-02-25 18:28 ` [Qemu-devel] [PATCHv2 09/12] vhost: vhost net support Michael S. Tsirkin
2010-02-25 19:04 ` [Qemu-devel] " Juan Quintela
2010-02-26 14:32 ` Michael S. Tsirkin
2010-02-26 14:38 ` Anthony Liguori
2010-02-26 14:54 ` Michael S. Tsirkin
2010-02-25 19:44 ` Anthony Liguori [this message]
2010-02-26 14:49 ` Michael S. Tsirkin
2010-02-26 15:18 ` Anthony Liguori
2010-02-27 19:38 ` Michael S. Tsirkin
2010-02-28 1:59 ` Paul Brook
2010-02-28 10:15 ` Michael S. Tsirkin
2010-02-28 12:45 ` Paul Brook
2010-02-28 14:44 ` Michael S. Tsirkin
2010-02-28 15:23 ` Paul Brook
2010-02-28 15:37 ` Michael S. Tsirkin
2010-02-28 16:02 ` Anthony Liguori
2010-02-25 18:28 ` [Qemu-devel] [PATCHv2 02/12] kvm: add API to set ioeventfd Michael S. Tsirkin
2010-02-25 19:19 ` [Qemu-devel] " Anthony Liguori
2010-03-02 17:41 ` Michael S. Tsirkin
2010-02-25 18:28 ` [Qemu-devel] [PATCHv2 04/12] virtio: add notifier support Michael S. Tsirkin
2010-02-25 18:28 ` [Qemu-devel] [PATCHv2 01/12] tap: add interface to get device fd Michael S. Tsirkin
2010-02-25 18:28 ` [Qemu-devel] [PATCHv2 07/12] virtio: move typedef to qemu-common Michael S. Tsirkin
2010-02-25 18:28 ` [Qemu-devel] [PATCHv2 10/12] tap: add vhost/vhostfd options Michael S. Tsirkin
2010-02-25 19:47 ` [Qemu-devel] " Anthony Liguori
2010-02-26 14:51 ` Michael S. Tsirkin
2010-02-26 15:23 ` Anthony Liguori
2010-02-27 19:44 ` Michael S. Tsirkin
2010-02-28 16:08 ` Anthony Liguori
2010-02-28 17:19 ` Michael S. Tsirkin
2010-02-28 20:57 ` Anthony Liguori
2010-02-28 21:01 ` Michael S. Tsirkin
2010-02-28 22:38 ` Anthony Liguori
2010-02-28 22:39 ` Paul Brook
2010-03-01 19:27 ` Michael S. Tsirkin
2010-03-01 21:54 ` Anthony Liguori
2010-03-02 9:57 ` Michael S. Tsirkin
2010-03-02 14:07 ` Anthony Liguori
2010-03-02 14:33 ` Paul Brook
2010-03-02 14:39 ` Anthony Liguori
2010-03-02 14:55 ` Paul Brook
2010-03-02 15:33 ` Anthony Liguori
2010-03-02 15:53 ` Paul Brook
2010-03-02 15:56 ` Michael S. Tsirkin
2010-03-02 16:12 ` Anthony Liguori
2010-03-02 16:21 ` Marcelo Tosatti
2010-03-02 16:12 ` Marcelo Tosatti
2010-03-02 16:56 ` Anthony Liguori
2010-03-02 17:00 ` Michael S. Tsirkin
2010-03-02 18:00 ` Marcelo Tosatti
2010-03-02 18:13 ` Anthony Liguori
2010-03-02 22:41 ` Paul Brook
2010-03-03 14:15 ` Anthony Liguori
2010-03-03 14:43 ` Paul Brook
2010-03-03 16:24 ` Marcelo Tosatti
2010-02-25 18:28 ` [Qemu-devel] [PATCHv2 11/12] tap: add API to retrieve vhost net header Michael S. Tsirkin
2010-02-25 18:28 ` [Qemu-devel] [PATCHv2 06/12] virtio: add set_status callback Michael S. Tsirkin
2010-02-25 18:28 ` [Qemu-devel] [PATCHv2 08/12] virtio-pci: fill in notifier support Michael S. Tsirkin
2010-02-25 19:30 ` [Qemu-devel] " Anthony Liguori
2010-02-28 20:02 ` Michael S. Tsirkin
2010-02-25 18:28 ` [Qemu-devel] [PATCHv2 03/12] notifier: event notifier implementation Michael S. Tsirkin
2010-02-25 19:22 ` [Qemu-devel] " Anthony Liguori
2010-02-28 19:59 ` Michael S. Tsirkin
2010-02-25 18:28 ` [Qemu-devel] [PATCHv2 12/12] virtio-net: vhost net support Michael S. Tsirkin
2010-02-25 19:49 ` [Qemu-devel] Re: [PATCHv2 00/12] vhost-net: upstream integration Anthony Liguori
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4B86D322.3020909@codemonkey.ws \
--to=anthony@codemonkey.ws \
--cc=amit.shah@redhat.com \
--cc=kraxel@redhat.com \
--cc=mst@redhat.com \
--cc=qemu-devel@nongnu.org \
--cc=quintela@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.