STAC9200 spdif output problem on Dell Precision M65

[Jonathan Thibault <jonathan@navigue.com>]

Hello alsa devs :)

I've tried to change the pin configuration for model=dell-m22 to match that of the windows driver as per this section of the relevant .INI file, but that hasn't really changed anything.  I haven't really incorporated the windows gpio settings as I couldn't find figure out how to do so.

Jonathan

---- relevant bits of windows .ini ----
[HKR\Settings\pin]
CodecName = STAC9200-32
[HKR\Settings\pin\08]
CfgDflt = dword: 0x40C003FA     
[HKR\Settings\pin\09]
CfgDflt = dword: 0x01441340     
[HKR\Settings\pin\10]
CfgDflt = dword: 0x03A1102E     
AltCfg = hex: 2F,10,81,03     	
Bias = hex: FF,04,02
[HKR\Settings\pin\11]
CfgDflt = dword: 0x401003FB     
[HKR\Settings\pin\12]
CfgDflt = dword: 0x403003FC     
[HKR\Settings\pin\0d]
CfgDflt = dword: 0x0321121F     
Action = hex: 80,00,81,0E,87,00
[HKR\Settings\pin\0e]
CfgDflt = dword: 0x90170310     
[HKR\Settings\pin\0F]
CfgDflt = dword: 0x90A70320
...
[HKR\Settings\gpio]
02 = hex: 0x00, 0x01, 0x0E, 0x00, 0x00, 0x07, 0x00
01 = hex: 0x82
03 = hex: 0x82
----------------------------------------

Here is the codec information.

cat /proc/asound/card0/codec#0 
Codec: SigmaTel STAC9200
Address: 0
Function Id: 0x1
Vendor Id: 0x83847690
Subsystem Id: 0x102801c8
Revision Id: 0x102201
No Modem Function Group found
Default PCM:
    rates [0x7e0]: 44100 48000 88200 96000 176400 192000
    bits [0xe]: 16 20 24
    formats [0x1]: PCM
Default Amp-In caps: N/A
Default Amp-Out caps: ofs=0x1f, nsteps=0x1f, stepsize=0x05, mute=1
GPIO: io=4, o=0, i=0, unsolicited=1, wake=1
  IO[0]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
  IO[1]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
  IO[2]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
  IO[3]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
Node 0x02 [Audio Output] wcaps 0xd0401: Stereo
  Converter: stream=5, channel=0
  Power: setting=D0, actual=D0
  Delay: 13 samples
Node 0x03 [Audio Input] wcaps 0x1d0541: Stereo
  Converter: stream=0, channel=0
  SDI-Select: 0
  Power: setting=D0, actual=D0
  Delay: 13 samples
  Connection: 1
     0x0a
  Processing caps: benign=0, ncoeff=0
Node 0x04 [Audio Input] wcaps 0x140311: Stereo Digital
  Converter: stream=0, channel=0
  SDI-Select: 0
  Digital:
  Digital category: 0x0
  PCM:
    rates [0x160]: 44100 48000 96000
    bits [0xe]: 16 20 24
    formats [0x5]: PCM AC3
  Delay: 4 samples
  Connection: 1
     0x08
Node 0x05 [Audio Output] wcaps 0x40211: Stereo Digital
  Converter: stream=5, channel=0
  Digital:
  Digital category: 0x0
  PCM:
    rates [0x1e0]: 44100 48000 88200 96000
    bits [0xe]: 16 20 24
    formats [0x5]: PCM AC3
  Delay: 4 samples
Node 0x06 [Vendor Defined Widget] wcaps 0xf30201: Stereo Digital
  Delay: 3 samples
Node 0x07 [Audio Selector] wcaps 0x300901: Stereo R/L
  Connection: 3
     0x02* 0x08 0x0a
Node 0x08 [Pin Complex] wcaps 0x430681: Stereo Digital
  Pincap 0x00010024: IN EAPD Detect
  EAPD 0x0:
  Pin Default 0x40c003fa: [N/A] SPDIF In at Ext N/A
    Conn = Unknown, Color = Unknown
    DefAssociation = 0xf, Sequence = 0xa
    Misc = NO_PRESENCE
  Pin-ctls: 0x00:
  Unsolicited: tag=00, enabled=0
  Power: setting=D0, actual=D0
  Delay: 3 samples
Node 0x09 [Pin Complex] wcaps 0x400301: Stereo Digital
  Pincap 0x00000010: OUT
  Pin Default 0x01441340: [Jack] SPDIF Out at Ext Rear
    Conn = RCA, Color = Black
    DefAssociation = 0x4, Sequence = 0x0
    Misc = NO_PRESENCE
  Pin-ctls: 0x40: OUT
  Connection: 2
     0x05* 0x0a
Node 0x0a [Audio Selector] wcaps 0x30090d: Stereo Amp-Out R/L
  Amp-Out caps: ofs=0x00, nsteps=0x0f, stepsize=0x05, mute=1
  Amp-Out vals:  [0x08 0x08]
  Connection: 1
     0x0c
Node 0x0b [Audio Selector] wcaps 0x300105: Stereo Amp-Out
  Amp-Out caps: N/A
  Amp-Out vals:  [0x19 0x19]
  Connection: 1
     0x07
Node 0x0c [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
  Amp-Out caps: ofs=0x00, nsteps=0x04, stepsize=0x27, mute=0
  Amp-Out vals:  [0x00 0x00]
  Connection: 5
     0x10 0x0f* 0x0e 0x0d 0x12
Node 0x0d [Pin Complex] wcaps 0x400181: Stereo
  Pincap 0x0000003f: IN OUT HP Detect Trigger ImpSense
  Pin Default 0x0321121f: [Jack] HP Out at Ext Left
    Conn = 1/8, Color = Black
    DefAssociation = 0x1, Sequence = 0xf
  Pin-ctls: 0x00:
  Unsolicited: tag=01, enabled=1
  Connection: 1
     0x0b
Node 0x0e [Pin Complex] wcaps 0x400181: Stereo
  Pincap 0x0000003f: IN OUT HP Detect Trigger ImpSense
  Pin Default 0x90170310: [Fixed] Speaker at Int N/A
    Conn = Analog, Color = Unknown
    DefAssociation = 0x1, Sequence = 0x0
    Misc = NO_PRESENCE
  Pin-ctls: 0x40: OUT
  Unsolicited: tag=00, enabled=0
  Connection: 1
     0x0b
Node 0x0f [Pin Complex] wcaps 0x400181: Stereo
  Pincap 0x00000037: IN OUT Detect Trigger ImpSense
  Pin Default 0x90a70320: [Fixed] Mic at Int N/A
    Conn = Analog, Color = Unknown
    DefAssociation = 0x2, Sequence = 0x0
    Misc = NO_PRESENCE
  Pin-ctls: 0x20: IN
  Unsolicited: tag=00, enabled=0
  Connection: 1
     0x0b
Node 0x10 [Pin Complex] wcaps 0x400181: Stereo
  Pincap 0x00001737: IN OUT Detect Trigger ImpSense
    Vref caps: HIZ 50 GRD 80
  Pin Default 0x0381102f: [Jack] Line In at Ext Left
    Conn = 1/8, Color = Black
    DefAssociation = 0x2, Sequence = 0xf
  Pin-ctls: 0x20: IN VREF_HIZ
  Unsolicited: tag=02, enabled=1
  Connection: 1
     0x0b
Node 0x11 [Pin Complex] wcaps 0x400104: Mono Amp-Out
  Amp-Out caps: N/A
  Amp-Out vals:  [0x00]
  Pincap 0x00000010: OUT
  Pin Default 0x401003fb: [N/A] Speaker at Ext N/A
    Conn = Unknown, Color = Unknown
    DefAssociation = 0xf, Sequence = 0xb
    Misc = NO_PRESENCE
  Pin-ctls: 0x00:
  Connection: 1
     0x13
Node 0x12 [Pin Complex] wcaps 0x400001: Stereo
  Pincap 0x00000020: IN
  Pin Default 0x403003fc: [N/A] CD at Ext N/A
    Conn = Unknown, Color = Unknown
    DefAssociation = 0xf, Sequence = 0xc
    Misc = NO_PRESENCE
  Pin-ctls: 0x20: IN
Node 0x13 [Audio Mixer] wcaps 0x200100: Mono
  Connection: 1
     0x07
Node 0x14 [Beep Generator Widget] wcaps 0x70000c: Mono Amp-Out
  Amp-Out caps: ofs=0x03, nsteps=0x03, stepsize=0x17, mute=1
  Amp-Out vals:  [0x00]


cat /proc/asound/card0/codec#1
Codec: Conexant ID 2bfa
Address: 1
Function Id: 0x2
Vendor Id: 0x14f12bfa
Subsystem Id: 0x14f100c3
Revision Id: 0x90000
Modem Function Group: 0x2