From: Anthony Liguori <anthony@codemonkey.ws>
To: Chris Webb <chris@arachsys.com>
Cc: qemu-devel@nongnu.org, kvm@vger.kernel.org
Subject: Re: Another VNC crash, qemu-kvm-0.12.3
Date: Wed, 03 Mar 2010 08:23:23 -0600 [thread overview]
Message-ID: <4B8E70DB.4080108@codemonkey.ws> (raw)
In-Reply-To: <20100301181416.GB15908@arachsys.com>
On 03/01/2010 12:14 PM, Chris Webb wrote:
> We've just seen another VNC related qemu-kvm crash, this time an arithmetic
> exception at vnc.c:1424 in the newly release qemu-kvm 0.12.3.
>
> [...]
> 1423 if (vs->absolute) {
> 1424 kbd_mouse_event(x * 0x7FFF / (ds_get_width(vs->ds) - 1),
> 1425 y * 0x7FFF / (ds_get_height(vs->ds) - 1),
> 1426 dz, buttons);
> 1427 } else if (vnc_has_feature(vs, VNC_FEATURE_POINTER_TYPE_CHANGE)) {
> 1428 x -= 0x7FFF;
> [...]
>
> and sure enough:
>
> (gdb) p vs->ds->surface->width
> $1 = 9
> (gdb) p vs->ds->surface->height
> $2 = 1
>
> What a 9x1 display surface is doing on this guest is a mystery to me, but you
> definitely can't divide by one less than its height!
>
Can you reproduce this reliably? If so, what's the procedure?
BTW, I'd suggest filing this at http://bugs.launchpad.net/qemu
Regards,
Anthony Liguori
> (gdb) p *vs
> $3 = {csock = 19, ds = 0x1c60fa0, dirty = {{4294967295, 4294967295, 4294967295, 4294967295,
> 4294967295}<repeats 2048 times>}, vd = 0x26a0110, need_update = 1, force_update = 0, features = 67,
> absolute = 1, last_x = -1, last_y = -1, vnc_encoding = 5, tight_quality = 9 '\t', tight_compression = 9 '\t',
> major = 3, minor = 8, challenge = "¹{\177\226\200kÕjéPñÄA¤o)", output = {capacity = 925115, offset = 0,
> buffer = 0x28ba4b0 ""}, input = {capacity = 5120, offset = 6, buffer = 0x28b90a0 "\005"},
> write_pixels = 0x4bb9e0<vnc_write_pixels_generic>, send_hextile_tile = 0x4bcdf0<send_hextile_tile_generic_32>,
> clientds = {flags = 0 '\0', width = 800, height = 600, linesize = 3200, data = 0x7fcd00ab6010 "", pf = {
> bits_per_pixel = 32 ' ', bytes_per_pixel = 4 '\004', depth = 24 '\030', rmask = 0, gmask = 0, bmask = 0,
> amask = 0, rshift = 16 '\020', gshift = 8 '\b', bshift = 0 '\0', ashift = 24 '\030', rmax = 255 'ÿ',
> gmax = 255 'ÿ', bmax = 255 'ÿ', amax = 255 'ÿ', rbits = 8 '\b', gbits = 8 '\b', bbits = 8 '\b',
> abits = 8 '\b'}}, audio_cap = 0x0, as = {freq = 44100, nchannels = 2, fmt = AUD_FMT_S16, endianness = 0},
> read_handler = 0x4beac0<protocol_client_msg>, read_handler_expect = 6, modifiers_state = '\0'<repeats 255 times>,
> zlib = {capacity = 0, offset = 0, buffer = 0x0}, zlib_tmp = {capacity = 0, offset = 0, buffer = 0x0},
> zlib_stream = {{next_in = 0x0, avail_in = 0, total_in = 0, next_out = 0x0, avail_out = 0, total_out = 0, msg = 0x0,
> state = 0x0, zalloc = 0, zfree = 0, opaque = 0x0, data_type = 0, adler = 0, reserved = 0}, {next_in = 0x0,
> avail_in = 0, total_in = 0, next_out = 0x0, avail_out = 0, total_out = 0, msg = 0x0, state = 0x0, zalloc = 0,
> zfree = 0, opaque = 0x0, data_type = 0, adler = 0, reserved = 0}, {next_in = 0x0, avail_in = 0, total_in = 0,
> next_out = 0x0, avail_out = 0, total_out = 0, msg = 0x0, state = 0x0, zalloc = 0, zfree = 0, opaque = 0x0,
> data_type = 0, adler = 0, reserved = 0}, {next_in = 0x0, avail_in = 0, total_in = 0, next_out = 0x0,
> avail_out = 0, total_out = 0, msg = 0x0, state = 0x0, zalloc = 0, zfree = 0, opaque = 0x0, data_type = 0,
> adler = 0, reserved = 0}}, next = 0x0}
>
> (gdb) p *vs->ds
> $4 = {surface = 0x1c81f40, opaque = 0x26a0110, gui_timer = 0x0, allocator = 0x8199d0, listeners = 0x1c95fa0,
> mouse_set = 0, cursor_define = 0, next = 0x0}
>
> (gdb) p *vs->ds->surface
> $5 = {flags = 2 '\002', width = 9, height = 1, linesize = 36, data = 0x7fcd00ab6010 "", pf = {
> bits_per_pixel = 32 ' ', bytes_per_pixel = 4 '\004', depth = 24 '\030', rmask = 16711680, gmask = 65280,
> bmask = 255, amask = 0, rshift = 16 '\020', gshift = 8 '\b', bshift = 0 '\0', ashift = 24 '\030', rmax = 255 'ÿ',
> gmax = 255 'ÿ', bmax = 255 'ÿ', amax = 255 'ÿ', rbits = 8 '\b', gbits = 8 '\b', bbits = 8 '\b', abits = 8 '\b'}}
>
> Cheers,
>
> Chris.
> --
> To unsubscribe from this list: send the line "unsubscribe kvm" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
WARNING: multiple messages have this Message-ID (diff)
From: Anthony Liguori <anthony@codemonkey.ws>
To: Chris Webb <chris@arachsys.com>
Cc: qemu-devel@nongnu.org, kvm@vger.kernel.org
Subject: [Qemu-devel] Re: Another VNC crash, qemu-kvm-0.12.3
Date: Wed, 03 Mar 2010 08:23:23 -0600 [thread overview]
Message-ID: <4B8E70DB.4080108@codemonkey.ws> (raw)
In-Reply-To: <20100301181416.GB15908@arachsys.com>
On 03/01/2010 12:14 PM, Chris Webb wrote:
> We've just seen another VNC related qemu-kvm crash, this time an arithmetic
> exception at vnc.c:1424 in the newly release qemu-kvm 0.12.3.
>
> [...]
> 1423 if (vs->absolute) {
> 1424 kbd_mouse_event(x * 0x7FFF / (ds_get_width(vs->ds) - 1),
> 1425 y * 0x7FFF / (ds_get_height(vs->ds) - 1),
> 1426 dz, buttons);
> 1427 } else if (vnc_has_feature(vs, VNC_FEATURE_POINTER_TYPE_CHANGE)) {
> 1428 x -= 0x7FFF;
> [...]
>
> and sure enough:
>
> (gdb) p vs->ds->surface->width
> $1 = 9
> (gdb) p vs->ds->surface->height
> $2 = 1
>
> What a 9x1 display surface is doing on this guest is a mystery to me, but you
> definitely can't divide by one less than its height!
>
Can you reproduce this reliably? If so, what's the procedure?
BTW, I'd suggest filing this at http://bugs.launchpad.net/qemu
Regards,
Anthony Liguori
> (gdb) p *vs
> $3 = {csock = 19, ds = 0x1c60fa0, dirty = {{4294967295, 4294967295, 4294967295, 4294967295,
> 4294967295}<repeats 2048 times>}, vd = 0x26a0110, need_update = 1, force_update = 0, features = 67,
> absolute = 1, last_x = -1, last_y = -1, vnc_encoding = 5, tight_quality = 9 '\t', tight_compression = 9 '\t',
> major = 3, minor = 8, challenge = "¹{\177\226\200kÕjéPñÄA¤o)", output = {capacity = 925115, offset = 0,
> buffer = 0x28ba4b0 ""}, input = {capacity = 5120, offset = 6, buffer = 0x28b90a0 "\005"},
> write_pixels = 0x4bb9e0<vnc_write_pixels_generic>, send_hextile_tile = 0x4bcdf0<send_hextile_tile_generic_32>,
> clientds = {flags = 0 '\0', width = 800, height = 600, linesize = 3200, data = 0x7fcd00ab6010 "", pf = {
> bits_per_pixel = 32 ' ', bytes_per_pixel = 4 '\004', depth = 24 '\030', rmask = 0, gmask = 0, bmask = 0,
> amask = 0, rshift = 16 '\020', gshift = 8 '\b', bshift = 0 '\0', ashift = 24 '\030', rmax = 255 'ÿ',
> gmax = 255 'ÿ', bmax = 255 'ÿ', amax = 255 'ÿ', rbits = 8 '\b', gbits = 8 '\b', bbits = 8 '\b',
> abits = 8 '\b'}}, audio_cap = 0x0, as = {freq = 44100, nchannels = 2, fmt = AUD_FMT_S16, endianness = 0},
> read_handler = 0x4beac0<protocol_client_msg>, read_handler_expect = 6, modifiers_state = '\0'<repeats 255 times>,
> zlib = {capacity = 0, offset = 0, buffer = 0x0}, zlib_tmp = {capacity = 0, offset = 0, buffer = 0x0},
> zlib_stream = {{next_in = 0x0, avail_in = 0, total_in = 0, next_out = 0x0, avail_out = 0, total_out = 0, msg = 0x0,
> state = 0x0, zalloc = 0, zfree = 0, opaque = 0x0, data_type = 0, adler = 0, reserved = 0}, {next_in = 0x0,
> avail_in = 0, total_in = 0, next_out = 0x0, avail_out = 0, total_out = 0, msg = 0x0, state = 0x0, zalloc = 0,
> zfree = 0, opaque = 0x0, data_type = 0, adler = 0, reserved = 0}, {next_in = 0x0, avail_in = 0, total_in = 0,
> next_out = 0x0, avail_out = 0, total_out = 0, msg = 0x0, state = 0x0, zalloc = 0, zfree = 0, opaque = 0x0,
> data_type = 0, adler = 0, reserved = 0}, {next_in = 0x0, avail_in = 0, total_in = 0, next_out = 0x0,
> avail_out = 0, total_out = 0, msg = 0x0, state = 0x0, zalloc = 0, zfree = 0, opaque = 0x0, data_type = 0,
> adler = 0, reserved = 0}}, next = 0x0}
>
> (gdb) p *vs->ds
> $4 = {surface = 0x1c81f40, opaque = 0x26a0110, gui_timer = 0x0, allocator = 0x8199d0, listeners = 0x1c95fa0,
> mouse_set = 0, cursor_define = 0, next = 0x0}
>
> (gdb) p *vs->ds->surface
> $5 = {flags = 2 '\002', width = 9, height = 1, linesize = 36, data = 0x7fcd00ab6010 "", pf = {
> bits_per_pixel = 32 ' ', bytes_per_pixel = 4 '\004', depth = 24 '\030', rmask = 16711680, gmask = 65280,
> bmask = 255, amask = 0, rshift = 16 '\020', gshift = 8 '\b', bshift = 0 '\0', ashift = 24 '\030', rmax = 255 'ÿ',
> gmax = 255 'ÿ', bmax = 255 'ÿ', amax = 255 'ÿ', rbits = 8 '\b', gbits = 8 '\b', bbits = 8 '\b', abits = 8 '\b'}}
>
> Cheers,
>
> Chris.
> --
> To unsubscribe from this list: send the line "unsubscribe kvm" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
next prev parent reply other threads:[~2010-03-03 14:23 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-02-21 17:23 [Qemu-devel] qemu-kvm 0.12.2 VNC segfault Chris Webb
2010-02-22 8:54 ` Avi Kivity
2010-02-22 8:54 ` [Qemu-devel] " Avi Kivity
2010-02-22 19:06 ` Chris Webb
2010-02-22 21:36 ` Anthony Liguori
2010-02-22 21:36 ` [Qemu-devel] " Anthony Liguori
2010-03-01 18:14 ` Another VNC crash, qemu-kvm-0.12.3 Chris Webb
2010-03-01 18:14 ` [Qemu-devel] " Chris Webb
2010-03-03 14:23 ` Anthony Liguori [this message]
2010-03-03 14:23 ` [Qemu-devel] " Anthony Liguori
2010-03-05 16:52 ` Chris Webb
2010-03-05 16:52 ` [Qemu-devel] " Chris Webb
2010-03-05 19:57 ` Alexander Graf
2010-03-05 19:57 ` Alexander Graf
2010-03-06 8:53 ` Chris Webb
2010-03-06 8:53 ` Chris Webb
2010-03-08 14:34 ` [PATCH] Fix SIGFPE for vnc display of width/height = 1 Chris Webb
2010-03-08 14:34 ` [Qemu-devel] " Chris Webb
2010-03-08 18:15 ` Chris Webb
2010-03-17 15:59 ` Anthony Liguori
2010-03-17 16:55 ` Alexander Graf
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4B8E70DB.4080108@codemonkey.ws \
--to=anthony@codemonkey.ws \
--cc=chris@arachsys.com \
--cc=kvm@vger.kernel.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.