From: Hendrik Skarpeid <skarp@online.no>
To: "Igor M. Liplianin" <liplianin@me.by>
Cc: linux-media@vger.kernel.org, Nameer Kazzaz <nameer.kazzaz@gmail.com>
Subject: Re: DM1105: could not attach frontend 195d:1105
Date: Thu, 04 Mar 2010 23:16:07 +0100 [thread overview]
Message-ID: <4B903127.208@online.no> (raw)
In-Reply-To: <201003032105.06263.liplianin@me.by>
Igor M. Liplianin skrev:
> On 3 марта 2010 18:42:42 Hendrik Skarpeid wrote:
>
>> Igor M. Liplianin wrote:
>>
>>> Now to find GPIO's for LNB power control and ... watch TV :)
>>>
>> Yep. No succesful tuning at the moment. There might also be an issue
>> with the reset signal and writing to GPIOCTR, as the module at the
>> moment loads succesfully only once.
>> As far as I can make out, the LNB power control is probably GPIO 16 and
>> 17, not sure which is which, and how they work.
>> GPIO15 is wired to tuner #reset
>>
> New patch to test
>
> ------------------------------------------------------------------------
>
>
> No virus found in this incoming message.
> Checked by AVG - www.avg.com
> Version: 9.0.733 / Virus Database: 271.1.1/2721 - Release Date: 03/03/10 20:34:00
>
modprobe si21xx debug=1 produces this output when scanning.
[ 2187.998349] si21xx: si21_read_status : FE_READ_STATUS : VSTATUS: 0x02
[ 2187.998353] si21xx: si21xx_set_frontend : FE_SET_FRONTEND
[ 2187.999881] si21xx: si21xx_setacquire
[ 2187.999884] si21xx: si21xx_set_symbolrate : srate = 27500000
[ 2188.022645] si21xx: si21_read_status : FE_READ_STATUS : VSTATUS: 0x01
[ 2188.054350] si21xx: si21_read_status : FE_READ_STATUS : VSTATUS: 0x02
[ 2188.054355] si21xx: si21xx_set_frontend : FE_SET_FRONTEND
[ 2188.055875] si21xx: si21xx_setacquire
[ 2188.055879] si21xx: si21xx_set_symbolrate : srate = 27500000
[ 2188.110359] si21xx: si21_read_status : FE_READ_STATUS : VSTATUS: 0x02
[ 2188.110366] si21xx: si21xx_set_frontend : FE_SET_FRONTEND
[ 2188.111885] si21xx: si21xx_setacquire
[ 2188.111889] si21xx: si21xx_set_symbolrate : srate = 27500000
[ 2188.166350] si21xx: si21_read_status : FE_READ_STATUS : VSTATUS: 0x02
[ 2188.166354] si21xx: si21xx_set_frontend : FE_SET_FRONTEND
Since the tuner at hand uses a Si2109 chip, VSTATUS 0x01 and 0x02 would
indicate that blind scanning is used. Blind scanning is a 2109/2110
specific function, and may not very usable since we always use initial
tuning files anyway. 2109/10 also supports the legacy scanning method
which is supported by Si2107708.
Is the use of blind scanning intentional?
next prev parent reply other threads:[~2010-03-04 22:16 UTC|newest]
Thread overview: 51+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <4B7D83B2.4030709@online.no>
2010-02-20 17:49 ` DM1105: could not attach frontend 195d:1105 Igor M. Liplianin
2010-02-22 20:56 ` Nameer Kazzaz
2010-02-23 12:14 ` Hendrik Skarpeid
2010-02-23 13:12 ` Nameer Kazzaz
2010-02-23 17:40 ` Igor M. Liplianin
2010-02-23 19:40 ` Nameer Kazzaz
2010-03-02 13:06 ` Hendrik Skarpeid
2010-03-02 19:09 ` Hendrik Skarpeid
2010-03-02 23:10 ` Igor M. Liplianin
2010-03-03 8:38 ` Hendrik Skarpeid
2010-03-03 15:49 ` Igor M. Liplianin
2010-03-03 16:42 ` Hendrik Skarpeid
2010-03-03 19:05 ` Igor M. Liplianin
2010-03-04 21:27 ` Hendrik Skarpeid
2010-03-04 22:16 ` Hendrik Skarpeid [this message]
2010-03-04 22:46 ` Hendrik Skarpeid
2010-03-06 11:52 ` Igor M. Liplianin
2010-03-06 19:18 ` Hendrik Skarpeid
2010-03-07 10:12 ` Igor M. Liplianin
2010-03-10 12:15 ` Hendrik Skarpeid
2010-03-31 10:47 ` Hendrik Skarpeid
2010-10-23 9:20 ` Igor M. Liplianin
2011-01-31 9:33 ` Matt Vickers
2011-01-31 17:55 ` Igor M. Liplianin
2011-02-01 5:17 ` Matt Vickers
2011-02-02 18:39 ` Igor M. Liplianin
2011-02-02 18:41 ` Igor M. Liplianin
2011-05-03 21:33 ` Mauro Carvalho Chehab
2011-05-05 18:41 Igor M. Liplianin
2011-05-05 19:01 ` Mauro Carvalho Chehab
-- strict thread matches above, loose matches on Subject: below --
2010-01-16 11:55 Igor M. Liplianin
2010-01-16 2:49 paul10
2010-01-16 3:11 ` paul10
2010-01-16 13:18 ` paul10
2010-01-16 14:12 ` Igor M. Liplianin
2010-01-19 8:51 ` paul10
2010-01-19 13:45 ` Igor M. liplianin
2010-01-20 21:20 ` paul10
2010-01-31 13:45 ` Igor M. Liplianin
2010-02-01 12:17 ` Nameer Kazzaz
2010-02-02 15:21 ` Nameer Kazzaz
2010-02-02 16:57 ` Igor M. Liplianin
2010-02-02 17:16 ` Nameer Kazzaz
2010-02-02 22:07 ` Nameer Kazzaz
2010-02-03 17:41 ` Igor M. Liplianin
2010-02-04 9:56 ` Nameer Kazzaz
2010-01-15 23:14 paul10
2010-01-15 23:54 ` Igor M. Liplianin
2010-01-16 0:10 ` Igor M. Liplianin
2010-01-15 9:15 paul10
2010-01-15 15:21 ` Igor M. Liplianin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4B903127.208@online.no \
--to=skarp@online.no \
--cc=linux-media@vger.kernel.org \
--cc=liplianin@me.by \
--cc=nameer.kazzaz@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.