From: Mauro Carvalho Chehab <mchehab@infradead.org>
To: "Igor M. Liplianin" <liplianin@me.by>
Cc: Hendrik Skarpeid <skarp@online.no>,
linux-media@vger.kernel.org,
Nameer Kazzaz <nameer.kazzaz@gmail.com>
Subject: Re: DM1105: could not attach frontend 195d:1105
Date: Tue, 03 May 2011 18:33:51 -0300 [thread overview]
Message-ID: <4DC074BF.3000508@infradead.org> (raw)
In-Reply-To: <201010231220.51387.liplianin@me.by>
Hi Igor,
Em 23-10-2010 07:20, Igor M. Liplianin escreveu:
> В сообщении от 10 марта 2010 14:15:49 автор Hendrik Skarpeid написал:
>> Igor M. Liplianin skrev:
>>> On 3 марта 2010 18:42:42 Hendrik Skarpeid wrote:
>>>> Igor M. Liplianin wrote:
>>>>> Now to find GPIO's for LNB power control and ... watch TV :)
>>>>
>>>> Yep. No succesful tuning at the moment. There might also be an issue
>>>> with the reset signal and writing to GPIOCTR, as the module at the
>>>> moment loads succesfully only once.
>>>> As far as I can make out, the LNB power control is probably GPIO 16 and
>>>> 17, not sure which is which, and how they work.
>>>> GPIO15 is wired to tuner #reset
>>>
>>> New patch to test
>>
>> I think the LNB voltage may be a little to high on my card, 14.5V and
>> 20V. I would be a little more happy if they were 14 and 19, 13 and 18
>> would be perfect.
>> Anyways, as Igor pointet out, I don't have any signal from the LNB,
>> checked with another tuner card. It's a quad LNB, and the other outputs
>> are fine. Maybe it's' toasted from to high supply voltage! I little word
>> of warning then.
>> Anyways, here's my tweaked driver.
>
> Here is reworked patch for clear GPIO's handling.
> It allows to support I2C on GPIO's and per board LNB control through GPIO's.
> Also incuded support for Hendrik's card.
> I think it is clear how to change and test GPIO's for LNB and other stuff now.
> To Hendrik:
> Not shure, but there is maybe GPIO for raise/down LNB voltage a little (~1v).
> It is used for long coaxial lines to compensate voltage dropping.
>
> Signed-off-by: Igor M. Liplianin <liplianin@me.by>
I'm not sure if this patch is still valid or not, and if it should or not be
applied, as there were several discussions around it. As a reference, it is stored
at patchwork with:
X-Patchwork-Id: 279091
And still applies fine (yet, patchwork lost patch history/comments and SOB).
Igor, could you please update me if I should apply this patch or if the patch got
rejected/superseeded?
Thanks!
Mauro.
next prev parent reply other threads:[~2011-05-03 21:34 UTC|newest]
Thread overview: 51+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <4B7D83B2.4030709@online.no>
2010-02-20 17:49 ` DM1105: could not attach frontend 195d:1105 Igor M. Liplianin
2010-02-22 20:56 ` Nameer Kazzaz
2010-02-23 12:14 ` Hendrik Skarpeid
2010-02-23 13:12 ` Nameer Kazzaz
2010-02-23 17:40 ` Igor M. Liplianin
2010-02-23 19:40 ` Nameer Kazzaz
2010-03-02 13:06 ` Hendrik Skarpeid
2010-03-02 19:09 ` Hendrik Skarpeid
2010-03-02 23:10 ` Igor M. Liplianin
2010-03-03 8:38 ` Hendrik Skarpeid
2010-03-03 15:49 ` Igor M. Liplianin
2010-03-03 16:42 ` Hendrik Skarpeid
2010-03-03 19:05 ` Igor M. Liplianin
2010-03-04 21:27 ` Hendrik Skarpeid
2010-03-04 22:16 ` Hendrik Skarpeid
2010-03-04 22:46 ` Hendrik Skarpeid
2010-03-06 11:52 ` Igor M. Liplianin
2010-03-06 19:18 ` Hendrik Skarpeid
2010-03-07 10:12 ` Igor M. Liplianin
2010-03-10 12:15 ` Hendrik Skarpeid
2010-03-31 10:47 ` Hendrik Skarpeid
2010-10-23 9:20 ` Igor M. Liplianin
2011-01-31 9:33 ` Matt Vickers
2011-01-31 17:55 ` Igor M. Liplianin
2011-02-01 5:17 ` Matt Vickers
2011-02-02 18:39 ` Igor M. Liplianin
2011-02-02 18:41 ` Igor M. Liplianin
2011-05-03 21:33 ` Mauro Carvalho Chehab [this message]
2011-05-05 18:41 Igor M. Liplianin
2011-05-05 19:01 ` Mauro Carvalho Chehab
-- strict thread matches above, loose matches on Subject: below --
2010-01-16 11:55 Igor M. Liplianin
2010-01-16 2:49 paul10
2010-01-16 3:11 ` paul10
2010-01-16 13:18 ` paul10
2010-01-16 14:12 ` Igor M. Liplianin
2010-01-19 8:51 ` paul10
2010-01-19 13:45 ` Igor M. liplianin
2010-01-20 21:20 ` paul10
2010-01-31 13:45 ` Igor M. Liplianin
2010-02-01 12:17 ` Nameer Kazzaz
2010-02-02 15:21 ` Nameer Kazzaz
2010-02-02 16:57 ` Igor M. Liplianin
2010-02-02 17:16 ` Nameer Kazzaz
2010-02-02 22:07 ` Nameer Kazzaz
2010-02-03 17:41 ` Igor M. Liplianin
2010-02-04 9:56 ` Nameer Kazzaz
2010-01-15 23:14 paul10
2010-01-15 23:54 ` Igor M. Liplianin
2010-01-16 0:10 ` Igor M. Liplianin
2010-01-15 9:15 paul10
2010-01-15 15:21 ` Igor M. Liplianin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4DC074BF.3000508@infradead.org \
--to=mchehab@infradead.org \
--cc=linux-media@vger.kernel.org \
--cc=liplianin@me.by \
--cc=nameer.kazzaz@gmail.com \
--cc=skarp@online.no \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.