mptscsih ioc0 attempting task abort

mptscsih ioc0 attempting task abort

[Gilberto Nunes]

Hi friends

I have a PowerEdge R210. The HD's are unique to Dell.
I made the RAID 1 controller.
In it I have installed GNU / Linux Debian Lenny 5.0.4.
I compiled the kernel 2.6.18.8-xen and the xen 3.4.1.
Compiled just fine, but after a few minutes to start the kernel 
2.6.18.8-xen, got this message from the kernel:
mptscsih ioc0 attempting task abort

And the whole system crashes!

Someone had this problem?

Thanks

-- 
Gilberto Nunes Ferreira
*Suporte T.I.*
*Selbetti Gestão de Documentos*
*(47) 3441-6004 / (47) 8861-6672*
*Fax (47) 3441-6027*
/*gilberto.nunes@selbetti.com.br*/

RE: mptscsih ioc0 attempting task abort

[Nadolski, Ed]

> -----Original Message-----
> From: xen-devel-bounces@lists.xensource.com [mailto:xen-devel-
> bounces@lists.xensource.com] On Behalf Of Gilberto Nunes
> Sent: Monday, March 15, 2010 7:29 AM
> To: xen-devel@lists.xensource.com
> Subject: [Xen-devel] mptscsih ioc0 attempting task abort
> 
> Hi friends
> 
> I have a PowerEdge R210. The HD's are unique to Dell.
> I made the RAID 1 controller.
> In it I have installed GNU / Linux Debian Lenny 5.0.4.
> I compiled the kernel 2.6.18.8-xen and the xen 3.4.1.
> Compiled just fine, but after a few minutes to start the kernel
> 2.6.18.8-xen, got this message from the kernel:
> mptscsih ioc0 attempting task abort
> 
> And the whole system crashes!
> 
> Someone had this problem?

Are you using VT-d?  What HBA card(s) are you using?

Ed

Re: mptscsih ioc0 attempting task abort

[Gilberto Nunes]

Nadolski, Ed escreveu:
>> -----Original Message-----
>> From: xen-devel-bounces@lists.xensource.com [mailto:xen-devel-
>> bounces@lists.xensource.com] On Behalf Of Gilberto Nunes
>> Sent: Monday, March 15, 2010 7:29 AM
>> To: xen-devel@lists.xensource.com
>> Subject: [Xen-devel] mptscsih ioc0 attempting task abort
>>
>> Hi friends
>>
>> I have a PowerEdge R210. The HD's are unique to Dell.
>> I made the RAID 1 controller.
>> In it I have installed GNU / Linux Debian Lenny 5.0.4.
>> I compiled the kernel 2.6.18.8-xen and the xen 3.4.1.
>> Compiled just fine, but after a few minutes to start the kernel
>> 2.6.18.8-xen, got this message from the kernel:
>> mptscsih ioc0 attempting task abort
>>
>> And the whole system crashes!
>>
>> Someone had this problem?
>>     
>
> Are you using VT-d?  What HBA card(s) are you using?
>
> Ed
>
>
> _______________________________________________
> Xen-devel mailing list
> Xen-devel@lists.xensource.com
> http://lists.xensource.com/xen-devel
>   
Yes... I am use VT-d... This feature is enable on bios...
The HBA is a Symbios Logic SAS1068E-IR....

Thanks
-- 
Gilberto Nunes Ferreira
*Suporte T.I.*
*Selbetti Gestão de Documentos*
*(47) 3441-6004 / (47) 8861-6672*
*Fax (47) 3441-6027*
/*gilberto.nunes@selbetti.com.br*/