[Regression] 2.6.34-rc1 sky2 mtu on second port defaults to 576

[Regression] 2.6.34-rc1 sky2 mtu on second port defaults to 576

[Michael Breuer]

Haven't bisected - problem seemed to have started around 2.6.34-rc1-0933 
(not seen before the rc1 tag).

On boot, eth1 ends up with MTU of 576 (eth0 is 1500). My f12 startup 
scripts are not setting MTU (never have).


Nothing of note in dmesg
No change to .config
No mtu change reported in log.

Basically, sky2 reports eth1 up... and within the same second begins 
reporting receive length errors. Most network functions via eth1 fail.

ifconfig eth1 reveals mtu of 576, setting mtu to 1500 restores network 
functionality.

Booting back to 2.6.33-06233 (git from March 8) the problem does not 
manifest.

I'll bisect if this isn't obvious to someone.

Re: [Regression] 2.6.34-rc1 sky2 mtu on second port defaults to 576

[Michael Breuer]

  On 3/16/2010 11:03 AM, Michael Breuer wrote:
> Haven't bisected - problem seemed to have started around 
> 2.6.34-rc1-0933 (not seen before the rc1 tag).
>
> On boot, eth1 ends up with MTU of 576 (eth0 is 1500). My f12 startup 
> scripts are not setting MTU (never have).
>
>
> Nothing of note in dmesg
> No change to .config
> No mtu change reported in log.
>
> Basically, sky2 reports eth1 up... and within the same second begins 
> reporting receive length errors. Most network functions via eth1 fail.
>
> ifconfig eth1 reveals mtu of 576, setting mtu to 1500 restores network 
> functionality.
>
> Booting back to 2.6.33-06233 (git from March 8) the problem does not 
> manifest.
>
> I'll bisect if this isn't obvious to someone.
> -- 
> To unsubscribe from this list: send the line "unsubscribe 
> linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at  http://www.tux.org/lkml/
Never mind... Cablevision changed my cable modem... dhcp is setting the 
mtu option to 576 (never did before). grrrr. My one fallback test seems 
to have been a fluke.

Re: [Regression] 2.6.34-rc1 sky2 mtu on second port defaults to 576

[Michael Breuer]

  On 3/16/2010 12:17 PM, Michael Breuer wrote:
>  On 3/16/2010 11:03 AM, Michael Breuer wrote:
>> Haven't bisected - problem seemed to have started around 
>> 2.6.34-rc1-0933 (not seen before the rc1 tag).
>>
>> On boot, eth1 ends up with MTU of 576 (eth0 is 1500). My f12 startup 
>> scripts are not setting MTU (never have).
>>
>>
>> Nothing of note in dmesg
>> No change to .config
>> No mtu change reported in log.
>>
>> Basically, sky2 reports eth1 up... and within the same second begins 
>> reporting receive length errors. Most network functions via eth1 fail.
>>
>> ifconfig eth1 reveals mtu of 576, setting mtu to 1500 restores 
>> network functionality.
>>
>> Booting back to 2.6.33-06233 (git from March 8) the problem does not 
>> manifest.
>>
>> I'll bisect if this isn't obvious to someone.
>> -- 
>> To unsubscribe from this list: send the line "unsubscribe 
>> linux-kernel" in
>> the body of a message to majordomo@vger.kernel.org
>> More majordomo info at  http://vger.kernel.org/majordomo-info.html
>> Please read the FAQ at  http://www.tux.org/lkml/
> Never mind... Cablevision changed my cable modem... dhcp is setting 
> the mtu option to 576 (never did before). grrrr. My one fallback test 
> seems to have been a fluke.
And one last update... turns out not Cablevision either. There was an 
F12 update to dhcp client over the weekend to enable request (and set) 
of interface.mtu by default. Previously, dhcp client was not requesting 
or setting the mtu.