* BUG: 2.6.34-rc1, RIP is (null)
@ 2010-03-18 22:22 Randy Dunlap
0 siblings, 0 replies; only message in thread
From: Randy Dunlap @ 2010-03-18 22:22 UTC (permalink / raw)
To: Linux Kernel Mailing List
[-- Attachment #1: Type: text/plain, Size: 2391 bytes --]
One of my automated tests failed to boot cleanly.
This is an 4-proc x86_64 server with 8 GB of RAM.
When I repeated the test, it booted and ran successfully.
BUG: unable to handle kernel NULL pointer dereference at (null)
IP: [<(null)>] (null)
PGD 0
Oops: 0010 [#1] SMP
last sysfs file: /sys/block/sdb/removable
CPU 3
Modules linked in: snd_seq_dummy tg3(+) libphy snd_seq_oss snd_seq_midi_event snd_seq ses enclosure snd_seq_device snd_pcm_oss snd_mixer_oss snd_pcm snd_timer snd soundcore snd_page_alloc tpm_tis floppy(+) serio_raw tpm k8temp tpm_bios hwmon pcspkr dm_region_hash dm_log usb_storage lpfc scsi_transport_fc scsi_tgt shpchp cciss uhci_hcd ohci_hcd ehci_hcd
Pid: 2570, comm: udevd Not tainted 2.6.34-rc1 #1 /ProLiant BL685c G1
RIP: 0010:[<0000000000000000>] [<(null)>] (null)
RSP: 0000:ffff880183b03e98 EFLAGS: 00010246
RAX: ffff88027d94bfd8 RBX: 00000000000000ea RCX: ffff88027d025d40
RDX: ffff880183b03eb0 RSI: dead000000200200 RDI: 0000000000000000
RBP: ffff880183b03ef0 R08: ffff88027d025d40 R09: 0000000000000632
R10: 0000000000000000 R11: 00000000ffffffff R12: ffffffffa0136900
R13: ffff88027f658000 R14: 0000000000000000 R15: 0000000000000100
FS: 00007fe01e9af710(0000) GS:ffff880183b00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
CR2: 0000000000000000 CR3: 000000027ea32000 CR4: 00000000000006e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Process udevd (pid: 2570, threadinfo ffff88027d94a000, task ffff88027d025d40)
Stack:
ffffffff81054e89 0000000000000052 0000000000000000 ffff880183b03eb0
<0> ffff880183b03eb0 ffffffff8101ea60 0000000000000282 0000000000000001
<0> 0000000000000141 0000000000000100 ffffffff81823088 ffff880183b03f40
Call Trace:
<IRQ>
[<ffffffff81054e89>] ? run_timer_softirq+0x16d/0x209
[<ffffffff8101ea60>] ? apic_write+0x11/0x13
[<ffffffff8104deb5>] __do_softirq+0xe1/0x1b7
[<ffffffff81009a5c>] call_softirq+0x1c/0x30
[<ffffffff8100b2b7>] do_softirq+0x46/0x9f
[<ffffffff8104dfd0>] irq_exit+0x45/0x84
[<ffffffff8101f442>] smp_apic_timer_interrupt+0x79/0x87
[<ffffffff81009513>] apic_timer_interrupt+0x13/0x20
<EOI>
Code: Bad RIP value.
RIP [<(null)>] (null)
RSP <ffff880183b03e98>
CR2: 0000000000000000
---[ end trace 77b6d5c602bfc703 ]---
Full kernel log & config file are attached.
--
~Randy
[-- Attachment #2: netcon-6816.log --]
[-- Type: text/plain, Size: 203330 bytes --]
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.34-rc1 (root@ca-ostest293.us.oracle.com) (gcc version 4.1.2 20080704 (Red Hat 4.1.2-46)) #1 SMP Mon Mar 8 14:01:59 PST 2010
Command line: root=LABEL=/ selinux=0 console=tty0 console=ttyS0,115200n8 reset_devices netconsole=56816@139.185.50.77/eth0,56816@139.185.50.76/00:18:FE:34:1C:3D nmi_watchdog=2 debug ignore_loglevel initcall_debug 3
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000007fe50000 (usable)
BIOS-e820: 000000007fe50000 - 000000007fe58000 (ACPI data)
BIOS-e820: 000000007fe58000 - 0000000080000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fed00000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved)
BIOS-e820: 00000000ffc00000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 000000027ffff000 (usable)
debug: ignoring loglevel setting.
NX (Execute Disable) protection: active
DMI 2.3 present.
e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
No AGP bridge found
last_pfn = 0x27ffff max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-FFFFF write-back
MTRR variable ranges enabled:
0 base 0000000000 mask FF80000000 write-back
1 disabled
2 disabled
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
TOM2: 0000000280000000 aka 10240M
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820 update range: 0000000080000000 - 0000000100000000 (usable) ==> (reserved)
last_pfn = 0x7fe50 max_arch_pfn = 0x400000000
initial memory mapped : 0 - 20000000
found SMP MP-table at [ffff8800000f4f80] f4f80
init_memory_mapping: 0000000000000000-000000007fe50000
0000000000 - 007fe00000 page 2M
007fe00000 - 007fe50000 page 4k
kernel direct mapping tables up to 7fe50000 @ 8000-c000
init_memory_mapping: 0000000100000000-000000027ffff000
0100000000 - 027fe00000 page 2M
027fe00000 - 027ffff000 page 4k
kernel direct mapping tables up to 27ffff000 @ a000-16000
RAMDISK: 37d77000 - 37feff29
ACPI: RSDP 00000000000f4f00 00024 (v02 HP )
ACPI: XSDT 000000007fe50780 0005C (v01 HP A08 00000002 Ò? 0000162E)
ACPI: FACP 000000007fe50800 000F4 (v03 HP A08 00000002 Ò? 0000162E)
ACPI: DSDT 000000007fe50900 03F75 (v01 HP DSDT 00000001 INTL 20030228)
ACPI: FACS 000000007fe50100 00040
ACPI: SPCR 000000007fe50140 00050 (v01 HP SPCRRBSU 00000001 Ò? 0000162E)
ACPI: MCFG 000000007fe501c0 0003C (v01 HP ProLiant 00000001 00000000)
ACPI: HPET 000000007fe50200 00038 (v01 HP A08 00000002 Ò? 0000162E)
ACPI: SPMI 000000007fe50240 00040 (v05 HP ProLiant 00000001 Ò? 0000162E)
ACPI: APIC 000000007fe50280 000DE (v01 HP 00000083 00000002 00000000)
ACPI: SRAT 000000007fe50380 00110 (v01 AMD HAMMER 00000001 AMD 00000001)
ACPI: Local APIC address 0xfee00000
SRAT: PXM 0 -> APIC 0x00 -> Node 0
SRAT: PXM 0 -> APIC 0x01 -> Node 0
SRAT: PXM 1 -> APIC 0x02 -> Node 1
SRAT: PXM 1 -> APIC 0x03 -> Node 1
SRAT: Node 0 PXM 0 0-a0000
SRAT: Node 0 PXM 0 100000-80000000
SRAT: Node 0 PXM 0 100000000-180000000
SRAT: Node 1 PXM 1 180000000-280000000
NUMA: Allocated memnodemap from 11000 - 16040
NUMA: Using 20 for the hash shift.
Initmem setup node 0 0000000000000000-0000000180000000
NODE_DATA [0000000100000000 - 0000000100013fff]
Initmem setup node 1 0000000180000000-000000027ffff000
NODE_DATA [0000000180000000 - 0000000180013fff]
[ffffea0000000000-ffffea00053fffff] PMD -> [ffff880100200000-ffff8801039fffff] on node 0
[ffffea0005400000-ffffea0008bfffff] PMD -> [ffff880180200000-ffff8801839fffff] on node 1
Zone PFN ranges:
DMA 0x00000001 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal 0x00100000 -> 0x0027ffff
Movable zone start PFN for each node
early_node_map[4] active PFN ranges
0: 0x00000001 -> 0x0000009f
0: 0x00000100 -> 0x0007fe50
0: 0x00100000 -> 0x00180000
1: 0x00180000 -> 0x0027ffff
On node 0 totalpages: 1048046
DMA zone: 56 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3942 pages, LIFO batch:0
DMA32 zone: 14280 pages used for memmap
DMA32 zone: 505480 pages, LIFO batch:31
Normal zone: 7168 pages used for memmap
Normal zone: 517120 pages, LIFO batch:31
On node 1 totalpages: 1048575
Normal zone: 14336 pages used for memmap
Normal zone: 1034239 pages, LIFO batch:31
Detected use of extended apic ids on hypertransport bus
Detected use of extended apic ids on hypertransport bus
ACPI: PM-Timer IO Port: 0x908
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
ACPI: IOAPIC (id[0x08] address[0xf7df0000] gsi_base[0])
IOAPIC[0]: apic_id 8, version 17, address 0xf7df0000, GSI 0-23
ACPI: IOAPIC (id[0x09] address[0xfdef0000] gsi_base[38])
IOAPIC[1]: apic_id 9, version 17, address 0xfdef0000, GSI 38-61
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x10228201 base: 0xfed00000
SMP: Allowing 4 CPUs, 0 hotplug CPUs
early_res array is doubled to 64 at [7000 - 77ff]
nr_irqs_gsi: 62
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
PM: Registered nosave memory: 000000007fe50000 - 000000007fe58000
PM: Registered nosave memory: 000000007fe58000 - 0000000080000000
PM: Registered nosave memory: 0000000080000000 - 00000000fec00000
PM: Registered nosave memory: 00000000fec00000 - 00000000fed00000
PM: Registered nosave memory: 00000000fed00000 - 00000000fee00000
PM: Registered nosave memory: 00000000fee00000 - 00000000fee10000
PM: Registered nosave memory: 00000000fee10000 - 00000000ffc00000
PM: Registered nosave memory: 00000000ffc00000 - 0000000100000000
Allocating PCI resources starting at 80000000 (gap: 80000000:7ec00000)
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:16 nr_cpumask_bits:16 nr_cpu_ids:4 nr_node_ids:2
PERCPU: Embedded 29 pages/cpu @ffff880001e00000 s90088 r8192 d20504 u1048576
pcpu-alloc: s90088 r8192 d20504 u1048576 alloc=1*2097152
pcpu-alloc: [0] 0 2 [1] 1 3
early_res array is doubled to 128 at [16040 - 1703f]
Built 2 zonelists in Zone order, mobility grouping on. Total pages: 2060781
Policy zone: Normal
Kernel command line: root=LABEL=/ selinux=0 console=tty0 console=ttyS0,115200n8 reset_devices netconsole=56816@139.185.50.77/eth0,56816@139.185.50.76/00:18:FE:34:1C:3D nmi_watchdog=2 debug ignore_loglevel initcall_debug 3
PID hash table entries: 4096 (order: 3, 32768 bytes)
Checking aperture...
No AGP bridge found
Node 0: aperture @ c000000 size 32 MB
Aperture pointing to e820 RAM. Ignoring.
Your BIOS doesn't leave a aperture memory hole
Please enable the IOMMU option in the BIOS setup
This costs you 64 MB of RAM
Mapping aperture over 65536 KB of RAM @ 20000000
PM: Registered nosave memory: 0000000020000000 - 0000000024000000
Subtract (63 early reservations)
#1 [0001000000 - 0001c4fb58] TEXT DATA BSS
#2 [0037d77000 - 0037feff29] RAMDISK
#3 [0001c50000 - 0001c5010c] BRK
#4 [00000f4f90 - 0000100000] BIOS reserved
#5 [00000f4f80 - 00000f4f90] MP-table mpf
#6 [000009f400 - 00000f1bf8] BIOS reserved
#7 [00000f1e2c - 00000f4f80] BIOS reserved
#8 [00000f1bf8 - 00000f1e2c] MP-table mpc
#9 [0000001000 - 0000003000] TRAMPOLINE
#10 [0000003000 - 0000007000] ACPI WAKEUP
#11 [0000008000 - 000000a000] PGTABLE
#12 [000000a000 - 0000011000] PGTABLE
#13 [0000011000 - 0000016040] MEMNODEMAP
#14 [0100000000 - 0100014000] NODE_DATA
#15 [0180000000 - 0180014000] NODE_DATA
#16 [0001c50140 - 0001c51140] BOOTMEM
#17 [0001c4fb80 - 0001c4fe80] BOOTMEM
#18 [0180014000 - 0180014300] BOOTMEM
#19 [0100014000 - 0100015000] BOOTMEM
#20 [0100015000 - 0100016000] BOOTMEM
#21 [0100200000 - 0103a00000] MEMMAP 0
#22 [0180200000 - 0183a00000] MEMMAP 1
#23 [0001c4fe80 - 0001c50000] BOOTMEM
#24 [0001c51140 - 0001c69140] BOOTMEM
#25 [0001c69140 - 0001c75140] BOOTMEM
#26 [0180014300 - 018002c300] BOOTMEM
#27 [0001c76000 - 0001c77000] BOOTMEM
#28 [0001c75140 - 0001c75181] BOOTMEM
#29 [0001c751c0 - 0001c75246] BOOTMEM
#30 [0001c75280 - 0001c754e8] BOOTMEM
#31 [0001c75500 - 0001c75568] BOOTMEM
#32 [0001c75580 - 0001c755e8] BOOTMEM
#33 [0001c75600 - 0001c75668] BOOTMEM
#34 [0001c75680 - 0001c756e8] BOOTMEM
#35 [0001c75700 - 0001c75768] BOOTMEM
#36 [0001c75780 - 0001c757e8] BOOTMEM
#37 [0001c75800 - 0001c75868] BOOTMEM
#38 [0001c75880 - 0001c758e8] BOOTMEM
#39 [0001c75900 - 0001c75968] BOOTMEM
#40 [0001c75980 - 0001c759e8] BOOTMEM
#41 [0001c75a00 - 0001c75a20] BOOTMEM
#42 [0001c75a40 - 0001c75a60] BOOTMEM
#43 [0001c75a80 - 0001c75b49] BOOTMEM
#44 [0001c75b80 - 0001c75c49] BOOTMEM
#45 [0001e00000 - 0001e1d000] BOOTMEM
#46 [0001f00000 - 0001f1d000] BOOTMEM
#47 [0183a00000 - 0183a1d000] BOOTMEM
#48 [0183b00000 - 0183b1d000] BOOTMEM
#49 [0001c75c80 - 0001c75c90] BOOTMEM
#50 [0001c75cc0 - 0001c75cd0] BOOTMEM
#51 [0001c75d00 - 0001c75d10] BOOTMEM
#52 [0001c75d40 - 0001c75d60] BOOTMEM
#53 [0001c75d80 - 0001c75ec0] BOOTMEM
#54 [0001c75ec0 - 0001c75f20] BOOTMEM
#55 [0001c75f40 - 0001c75fa0] BOOTMEM
#56 [0001c77000 - 0001c7f000] BOOTMEM
#57 [0020000000 - 0024000000] BOOTMEM
#58 [0001c75fc0 - 0001c75fe0] BOOTMEM
#59 [0001f1d000 - 0005f1d000] BOOTMEM
#60 [0001c7f000 - 0001c9f000] BOOTMEM
#61 [0001c9f000 - 0001cdf000] BOOTMEM
#62 [0000017040 - 000001f040] BOOTMEM
7 - 8
20 40 - 80 9f
100 100 - 1000 1000
1cdf 1d00 - 1e00 1e00
1e1d 1e40 - 1f00 1f00
5f1d 5f40 - 20000 20000
24000 24000 - 37d40 37d77
37ff0 38000 - 7fe40 7fe50
100016 100040 - 100200 100200
103a00 103a00 - 180000 180000
18002d 180040 - 180200 180200
183a1d 183a40 - 183b00 183b00
183b1d 183b40 - 27ffc0 27ffff
Memory: 8124160k/10485756k available (3844k kernel code, 2099272k absent, 262324k reserved, 5289k data, 1292k init)
SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=2
Hierarchical RCU implementation.
NR_IRQS:768
Extended CMOS year: 2000
spurious 8259A interrupt: IRQ7.
Console: colour VGA+ 80x25
console [tty0] enabled
console [ttyS0] enabled
hpet clockevent registered
Fast TSC calibration using PIT
Detected 2612.028 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 5224.05 BogoMIPS (lpj=2612028)
Security Framework initialized
SELinux: Disabled at boot.
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys devices
tseg: 0000000000
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 5 MCE banks
using C1E aware idle routine
Performance Events: AMD PMU driver.
... version: 0
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000000f
ACPI: Core revision 20100121
Setting APIC routing to flat
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Dual-Core AMD Opteron(tm) Processor 8218 stepping 02
calling migration_init+0x0/0x5a @ 1
initcall migration_init+0x0/0x5a returned 0 after 0 usecs
calling spawn_ksoftirqd+0x0/0x5a @ 1
initcall spawn_ksoftirqd+0x0/0x5a returned 0 after 0 usecs
calling init_call_single_data+0x0/0x82 @ 1
initcall init_call_single_data+0x0/0x82 returned 0 after 0 usecs
calling spawn_softlockup_task+0x0/0x75 @ 1
initcall spawn_softlockup_task+0x0/0x75 returned 0 after 0 usecs
calling relay_init+0x0/0x14 @ 1
initcall relay_init+0x0/0x14 returned 0 after 0 usecs
calling tracer_alloc_buffers+0x0/0x1d6 @ 1
initcall tracer_alloc_buffers+0x0/0x1d6 returned 0 after 0 usecs
calling init_trace_printk+0x0/0x12 @ 1
initcall init_trace_printk+0x0/0x12 returned 0 after 0 usecs
calling mce_amd_init+0x0/0x2d @ 1
initcall mce_amd_init+0x0/0x2d returned 0 after 0 usecs
Booting Node 1, Processors #1 Ok.
Booting Node 0, Processors #2 Ok.
Booting Node 1, Processors #3 Ok.
Brought up 4 CPUs
Total of 4 processors activated (20895.42 BogoMIPS).
Testing NMI watchdog ... OK.
calling init_mmap_min_addr+0x0/0x26 @ 1
initcall init_mmap_min_addr+0x0/0x26 returned 0 after 0 usecs
calling init_cpufreq_transition_notifier_list+0x0/0x1b @ 1
initcall init_cpufreq_transition_notifier_list+0x0/0x1b returned 0 after 0 usecs
calling net_ns_init+0x0/0x150 @ 1
initcall net_ns_init+0x0/0x150 returned 0 after 0 usecs
calling e820_mark_nvs_memory+0x0/0x41 @ 1
initcall e820_mark_nvs_memory+0x0/0x41 returned 0 after 0 usecs
calling cpufreq_tsc+0x0/0x28 @ 1
initcall cpufreq_tsc+0x0/0x28 returned 0 after 0 usecs
calling pci_reboot_init+0x0/0x14 @ 1
initcall pci_reboot_init+0x0/0x14 returned 0 after 0 usecs
calling init_lapic_sysfs+0x0/0x2d @ 1
initcall init_lapic_sysfs+0x0/0x2d returned 0 after 0 usecs
calling init_smp_flush+0x0/0x21 @ 1
initcall init_smp_flush+0x0/0x21 returned 0 after 0 usecs
calling alloc_frozen_cpus+0x0/0xa @ 1
initcall alloc_frozen_cpus+0x0/0xa returned 0 after 0 usecs
calling sysctl_init+0x0/0x16 @ 1
initcall sysctl_init+0x0/0x16 returned 0 after 0 usecs
calling ksysfs_init+0x0/0x94 @ 1
initcall ksysfs_init+0x0/0x94 returned 0 after 0 usecs
calling async_init+0x0/0x61 @ 1
initcall async_init+0x0/0x61 returned 0 after 0 usecs
calling init_jiffies_clocksource+0x0/0x12 @ 1
initcall init_jiffies_clocksource+0x0/0x12 returned 0 after 0 usecs
calling pm_init+0x0/0x34 @ 1
initcall pm_init+0x0/0x34 returned 0 after 0 usecs
calling pm_disk_init+0x0/0x19 @ 1
initcall pm_disk_init+0x0/0x19 returned 0 after 0 usecs
calling swsusp_header_init+0x0/0x2c @ 1
initcall swsusp_header_init+0x0/0x2c returned 0 after 0 usecs
calling init_hw_breakpoint+0x0/0x12 @ 1
initcall init_hw_breakpoint+0x0/0x12 returned 0 after 0 usecs
calling init_zero_pfn+0x0/0x35 @ 1
initcall init_zero_pfn+0x0/0x35 returned 0 after 0 usecs
calling filelock_init+0x0/0x2e @ 1
initcall filelock_init+0x0/0x2e returned 0 after 0 usecs
calling init_misc_binfmt+0x0/0x42 @ 1
initcall init_misc_binfmt+0x0/0x42 returned 0 after 0 usecs
calling init_script_binfmt+0x0/0x14 @ 1
initcall init_script_binfmt+0x0/0x14 returned 0 after 0 usecs
calling init_elf_binfmt+0x0/0x14 @ 1
initcall init_elf_binfmt+0x0/0x14 returned 0 after 0 usecs
calling init_compat_elf_binfmt+0x0/0x14 @ 1
initcall init_compat_elf_binfmt+0x0/0x14 returned 0 after 0 usecs
calling debugfs_init+0x0/0x5a @ 1
initcall debugfs_init+0x0/0x5a returned 0 after 0 usecs
calling securityfs_init+0x0/0x51 @ 1
initcall securityfs_init+0x0/0x51 returned 0 after 0 usecs
calling random32_init+0x0/0xd1 @ 1
initcall random32_init+0x0/0xd1 returned 0 after 0 usecs
calling gnttab_init+0x0/0x169 @ 1
initcall gnttab_init+0x0/0x169 returned -19 after 0 usecs
calling early_resume_init+0x0/0x19b @ 1
Time: 14:13:38 Date: 03/08/10
initcall early_resume_init+0x0/0x19b returned 0 after 976 usecs
calling cpufreq_core_init+0x0/0x8c @ 1
initcall cpufreq_core_init+0x0/0x8c returned 0 after 0 usecs
calling cpuidle_init+0x0/0x40 @ 1
initcall cpuidle_init+0x0/0x40 returned 0 after 0 usecs
calling sock_init+0x0/0x5e @ 1
initcall sock_init+0x0/0x5e returned 0 after 0 usecs
calling netpoll_init+0x0/0x31 @ 1
initcall netpoll_init+0x0/0x31 returned 0 after 0 usecs
calling netlink_proto_init+0x0/0x14c @ 1
NET: Registered protocol family 16
initcall netlink_proto_init+0x0/0x14c returned 0 after 976 usecs
calling bdi_class_init+0x0/0x41 @ 1
initcall bdi_class_init+0x0/0x41 returned 0 after 0 usecs
calling kobject_uevent_init+0x0/0x54 @ 1
initcall kobject_uevent_init+0x0/0x54 returned 0 after 0 usecs
calling pcibus_class_init+0x0/0x19 @ 1
initcall pcibus_class_init+0x0/0x19 returned 0 after 0 usecs
calling pci_driver_init+0x0/0x12 @ 1
initcall pci_driver_init+0x0/0x12 returned 0 after 0 usecs
calling backlight_class_init+0x0/0x5d @ 1
initcall backlight_class_init+0x0/0x5d returned 0 after 0 usecs
calling xenbus_probe_init+0x0/0xcb @ 1
initcall xenbus_probe_init+0x0/0xcb returned -19 after 0 usecs
calling tty_class_init+0x0/0x38 @ 1
initcall tty_class_init+0x0/0x38 returned 0 after 0 usecs
calling vtconsole_class_init+0x0/0xc3 @ 1
initcall vtconsole_class_init+0x0/0xc3 returned 0 after 0 usecs
calling register_node_type+0x0/0x12 @ 1
initcall register_node_type+0x0/0x12 returned 0 after 0 usecs
calling i2c_init+0x0/0x6b @ 1
initcall i2c_init+0x0/0x6b returned 0 after 0 usecs
calling amd_postcore_init+0x0/0x8bd @ 1
node 0 link 1: io port [1000, 3fff]
node 1 link 2: io port [4000, ffff]
TOM: 0000000080000000 aka 2048M
node 0 link 1: mmio [e8000000, fddfffff]
node 1 link 2: mmio [fde00000, fdffffff]
node 0 link 1: mmio [80000000, 83ffffff]
node 1 link 2: mmio [84000000, 8fffffff]
node 0 link 1: mmio [a0000, bffff]
TOM2: 0000000280000000 aka 10240M
bus: [00, 3f] on node 0 link 1
bus: 00 index 0 [io 0x0000-0x3fff]
bus: 00 index 1 [mem 0x90000000-0xfddfffff]
bus: 00 index 2 [mem 0x80000000-0x83ffffff]
bus: 00 index 3 [mem 0x000a0000-0x000bffff]
bus: 00 index 4 [mem 0xfe000000-0xffffffff]
bus: 00 index 5 [mem 0x280000000-0xfcffffffff]
bus: [40, ff] on node 1 link 2
bus: 40 index 0 [io 0x4000-0xffff]
bus: 40 index 1 [mem 0xfde00000-0xfdffffff]
bus: 40 index 2 [mem 0x84000000-0x8fffffff]
initcall amd_postcore_init+0x0/0x8bd returned 0 after 23437 usecs
calling arch_kdebugfs_init+0x0/0x242 @ 1
initcall arch_kdebugfs_init+0x0/0x242 returned 0 after 0 usecs
calling mtrr_if_init+0x0/0x63 @ 1
initcall mtrr_if_init+0x0/0x63 returned 0 after 0 usecs
calling ffh_cstate_init+0x0/0x2a @ 1
initcall ffh_cstate_init+0x0/0x2a returned -1 after 0 usecs
initcall ffh_cstate_init+0x0/0x2a returned with error code -1
calling acpi_pci_init+0x0/0x5c @ 1
ACPI: bus type pci registered
initcall acpi_pci_init+0x0/0x5c returned 0 after 976 usecs
calling setup_vcpu_hotplug_event+0x0/0x22 @ 1
initcall setup_vcpu_hotplug_event+0x0/0x22 returned -19 after 0 usecs
calling dmi_id_init+0x0/0x31a @ 1
initcall dmi_id_init+0x0/0x31a returned 0 after 0 usecs
calling dma_bus_init+0x0/0x3f @ 1
initcall dma_bus_init+0x0/0x3f returned 0 after 0 usecs
calling dma_channel_table_init+0x0/0xbf @ 1
initcall dma_channel_table_init+0x0/0xbf returned 0 after 0 usecs
calling pci_arch_init+0x0/0x69 @ 1
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0x80000000-0x8fffffff] (base 0x80000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
PCI: HP ProLiant BL685c G1 detected, enabling pci=bfsort.
initcall pci_arch_init+0x0/0x69 returned 0 after 3906 usecs
calling topology_init+0x0/0x86 @ 1
initcall topology_init+0x0/0x86 returned 0 after 0 usecs
calling mtrr_init_finialize+0x0/0x3d @ 1
initcall mtrr_init_finialize+0x0/0x3d returned 0 after 0 usecs
calling param_sysfs_init+0x0/0x216 @ 1
initcall param_sysfs_init+0x0/0x216 returned 0 after 4882 usecs
calling pm_sysrq_init+0x0/0x19 @ 1
initcall pm_sysrq_init+0x0/0x19 returned 0 after 0 usecs
calling audit_watch_init+0x0/0x2f @ 1
initcall audit_watch_init+0x0/0x2f returned 0 after 0 usecs
calling init_slow_work+0x0/0x39 @ 1
initcall init_slow_work+0x0/0x39 returned 0 after 0 usecs
calling default_bdi_init+0x0/0xb6 @ 1
initcall default_bdi_init+0x0/0xb6 returned 0 after 0 usecs
calling init_bio+0x0/0xe2 @ 1
bio: create slab <bio-0> at 0
initcall init_bio+0x0/0xe2 returned 0 after 976 usecs
calling fsnotify_init+0x0/0x12 @ 1
initcall fsnotify_init+0x0/0x12 returned 0 after 0 usecs
calling fsnotify_notification_init+0x0/0x68 @ 1
initcall fsnotify_notification_init+0x0/0x68 returned 0 after 0 usecs
calling cryptomgr_init+0x0/0x12 @ 1
initcall cryptomgr_init+0x0/0x12 returned 0 after 0 usecs
calling blk_settings_init+0x0/0x2a @ 1
initcall blk_settings_init+0x0/0x2a returned 0 after 0 usecs
calling blk_ioc_init+0x0/0x2a @ 1
initcall blk_ioc_init+0x0/0x2a returned 0 after 0 usecs
calling blk_softirq_init+0x0/0x6e @ 1
initcall blk_softirq_init+0x0/0x6e returned 0 after 0 usecs
calling blk_iopoll_setup+0x0/0x6e @ 1
initcall blk_iopoll_setup+0x0/0x6e returned 0 after 0 usecs
calling genhd_device_init+0x0/0x66 @ 1
initcall genhd_device_init+0x0/0x66 returned 0 after 0 usecs
calling pci_slot_init+0x0/0x45 @ 1
initcall pci_slot_init+0x0/0x45 returned 0 after 0 usecs
calling fbmem_init+0x0/0x98 @ 1
initcall fbmem_init+0x0/0x98 returned 0 after 0 usecs
calling acpi_init+0x0/0x2d8 @ 1
ACPI: EC: Look up EC in DSDT
ACPI: SSDT 000000007fe58000 004F0 (v02 HP PNOWSSDT 00000002 HP 00000001)
ACPI: Interpreter enabled
ACPI: (supports S0 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0x80000000-0x8fffffff] (base 0x80000000)
PCI: MMCONFIG at [mem 0x80000000-0x8fffffff] reserved in ACPI motherboard resources
initcall acpi_init+0x0/0x2d8 returned 0 after 41015 usecs
calling dock_init+0x0/0xa5 @ 1
ACPI: No dock devices found.
initcall dock_init+0x0/0xa5 returned 0 after 976 usecs
calling acpi_pci_root_init+0x0/0x2d @ 1
PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci_root PNP0A03:00: host bridge window [io 0x0000-0x03af] (ignored)
pci_root PNP0A03:00: host bridge window [io 0x03b0-0x03bb] (ignored)
pci_root PNP0A03:00: host bridge window [io 0x03c0-0x03df] (ignored)
pci_root PNP0A03:00: host bridge window [io 0x03e0-0x0fff] (ignored)
pci_root PNP0A03:00: host bridge window [io 0x1000-0x3fff] (ignored)
pci_root PNP0A03:00: host bridge window [mem 0xe8000000-0xfddfffff] (ignored)
pci_root PNP0A03:00: host bridge window [mem 0x80000000-0x83ffffff] (ignored)
pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
pci 0000:00:02.0: reg 10: [mem 0xf7de0000-0xf7de0fff]
pci 0000:00:02.0: supports D1 D2
pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:02.0: PME# disabled
pci 0000:00:02.1: reg 10: [mem 0xf7dd0000-0xf7dd00ff]
pci 0000:00:02.1: supports D1 D2
pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:02.1: PME# disabled
pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0b.0: PME# disabled
pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0c.0: PME# disabled
pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0d.0: PME# disabled
pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0e.0: PME# disabled
PCI: peer root bus 00 res updated from pci conf
pci 0000:01:03.0: reg 10: [mem 0xe8000000-0xefffffff pref]
pci 0000:01:03.0: reg 14: [io 0x1000-0x10ff]
pci 0000:01:03.0: reg 18: [mem 0xf7ff0000-0xf7ffffff]
pci 0000:01:03.0: reg 30: [mem 0x00000000-0x0001ffff pref]
pci 0000:01:03.0: supports D1 D2
pci 0000:01:04.0: reg 10: [io 0x2800-0x28ff]
pci 0000:01:04.0: reg 14: [mem 0xf7fe0000-0xf7fe01ff]
pci 0000:01:04.0: PME# supported from D0 D3hot D3cold
pci 0000:01:04.0: PME# disabled
pci 0000:01:04.2: reg 10: [io 0x1400-0x14ff]
pci 0000:01:04.2: reg 14: [mem 0xf7fd0000-0xf7fd07ff]
pci 0000:01:04.2: reg 18: [mem 0xf7fc0000-0xf7fc3fff]
pci 0000:01:04.2: reg 1c: [mem 0xf7f00000-0xf7f7ffff]
pci 0000:01:04.2: reg 30: [mem 0x00000000-0x0000ffff pref]
pci 0000:01:04.2: PME# supported from D0 D3hot D3cold
pci 0000:01:04.2: PME# disabled
pci 0000:01:04.4: reg 20: [io 0x1800-0x181f]
pci 0000:01:04.4: PME# supported from D0 D3hot D3cold
pci 0000:01:04.4: PME# disabled
pci 0000:01:04.6: reg 10: [mem 0xf7ef0000-0xf7ef00ff]
pci 0000:01:04.6: PME# supported from D0 D3hot D3cold
pci 0000:01:04.6: PME# disabled
pci 0000:00:09.0: PCI bridge to [bus 01-01] (subtractive decode)
pci 0000:00:09.0: bridge window [io 0x1000-0x2fff]
pci 0000:00:09.0: bridge window [mem 0xf7e00000-0xf7ffffff]
pci 0000:00:09.0: bridge window [mem 0xe8000000-0xefffffff pref]
pci 0000:00:09.0: bridge window [io 0x0000-0x3fff] (subtractive decode)
pci 0000:00:09.0: bridge window [mem 0x90000000-0xfddfffff] (subtractive decode)
pci 0000:00:09.0: bridge window [mem 0x80000000-0x83ffffff] (subtractive decode)
pci 0000:00:09.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:09.0: bridge window [mem 0xfe000000-0xffffffff] (subtractive decode)
pci 0000:00:09.0: bridge window [mem 0x280000000-0xfcffffffff] (subtractive decode)
pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
pci 0000:02:00.0: PME# disabled
pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:0b.0: PCI bridge to [bus 02-03]
pci 0000:00:0b.0: bridge window [io fffffffffffff000 - 0000] reg reading
pci 0000:00:0b.0: bridge window [mem 0xf8000000-0xf9ffffff]
pci 0000:00:0b.0: bridge window [mem 0xfff00000 - 000fffff pref] reg reading
pci 0000:03:00.0: reg 10: [mem 0xf8000000-0xf9ffffff 64bit]
pci 0000:03:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
pci 0000:03:00.0: PME# supported from D3hot D3cold
pci 0000:03:00.0: PME# disabled
pci 0000:02:00.0: PCI bridge to [bus 03-03]
pci 0000:02:00.0: bridge window [io fffffffffffff000 - 0000] reg reading
pci 0000:02:00.0: bridge window [mem 0xf8000000-0xf9ffffff]
pci 0000:02:00.0: bridge window [mem 0xfff00000 - 000fffff pref] reg reading
pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
pci 0000:04:00.0: PME# disabled
pci 0000:04:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:0c.0: PCI bridge to [bus 04-05]
pci 0000:00:0c.0: bridge window [io fffffffffffff000 - 0000] reg reading
pci 0000:00:0c.0: bridge window [mem 0xfa000000-0xfbffffff]
pci 0000:00:0c.0: bridge window [mem 0xfff00000 - 000fffff pref] reg reading
pci 0000:05:00.0: reg 10: [mem 0xfa000000-0xfbffffff 64bit]
pci 0000:05:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
pci 0000:05:00.0: PME# supported from D3hot D3cold
pci 0000:05:00.0: PME# disabled
pci 0000:04:00.0: PCI bridge to [bus 05-05]
pci 0000:04:00.0: bridge window [io fffffffffffff000 - 0000] reg reading
pci 0000:04:00.0: bridge window [mem 0xfa000000-0xfbffffff]
pci 0000:04:00.0: bridge window [mem 0xfff00000 - 000fffff pref] reg reading
pci 0000:06:00.0: PME# supported from D0 D3hot D3cold
pci 0000:06:00.0: PME# disabled
pci 0000:06:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:0d.0: PCI bridge to [bus 06-07]
pci 0000:00:0d.0: bridge window [io fffffffffffff000 - 0000] reg reading
pci 0000:00:0d.0: bridge window [mem 0xfdc00000-0xfdcfffff]
pci 0000:00:0d.0: bridge window [mem 0xfff00000 - 000fffff pref] reg reading
pci 0000:07:04.0: reg 10: [mem 0xfdcf0000-0xfdcfffff 64bit]
pci 0000:07:04.0: reg 18: [mem 0xfdce0000-0xfdceffff 64bit]
pci 0000:07:04.0: PME# supported from D3hot D3cold
pci 0000:07:04.0: PME# disabled
pci 0000:07:04.1: reg 10: [mem 0xfdcd0000-0xfdcdffff 64bit]
pci 0000:07:04.1: reg 18: [mem 0xfdcc0000-0xfdccffff 64bit]
pci 0000:07:04.1: PME# supported from D3hot D3cold
pci 0000:07:04.1: PME# disabled
pci 0000:06:00.0: PCI bridge to [bus 07-07]
pci 0000:06:00.0: bridge window [io fffffffffffff000 - 0000] reg reading
pci 0000:06:00.0: bridge window [mem 0xfdc00000-0xfdcfffff]
pci 0000:06:00.0: bridge window [mem 0xfff00000 - 000fffff pref] reg reading
pci 0000:08:00.0: reg 10: [mem 0xfddf0000-0xfddf0fff 64bit]
pci 0000:08:00.0: reg 18: [mem 0xfdde0000-0xfdde00ff 64bit]
pci 0000:08:00.0: reg 20: [io 0x3000-0x30ff]
pci 0000:08:00.0: reg 30: [mem 0x00000000-0x0003ffff pref]
pci 0000:08:00.1: reg 10: [mem 0xfddd0000-0xfddd0fff 64bit]
pci 0000:08:00.1: reg 18: [mem 0xfddc0000-0xfddc00ff 64bit]
pci 0000:08:00.1: reg 20: [io 0x3400-0x34ff]
pci 0000:08:00.1: reg 30: [mem 0x00000000-0x0003ffff pref]
pci 0000:08:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:0e.0: PCI bridge to [bus 08-0a]
pci 0000:00:0e.0: bridge window [io 0x3000-0x3fff]
pci 0000:00:0e.0: bridge window [mem 0xfdd00000-0xfddfffff]
pci 0000:00:0e.0: bridge window [mem 0xfff00000 - 000fffff pref] reg reading
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.IP2P._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.CPE0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.CPE1.NB01._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.CPE2.NC1B._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.CPE3.NC2B._PRT]
ACPI: PCI Root Bridge [PCI1] (0000:40)
pci_root PNP0A03:01: host bridge window [io 0x4000-0xffff] (ignored)
pci_root PNP0A03:01: host bridge window [mem 0xfde00000-0xfdffffff] (ignored)
pci_root PNP0A03:01: host bridge window [mem 0x84000000-0x8fffffff] (ignored)
pci 0000:40:01.0: reg 14: [mem 0xfdef0000-0xfdef0fff]
pci 0000:40:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:40:0c.0: PME# disabled
pci 0000:40:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:40:0d.0: PME# disabled
pci 0000:40:0e.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:40:0e.0: PME# disabled
PCI: peer root bus 40 res updated from pci conf
pci 0000:41:00.0: PME# supported from D0 D3hot D3cold
pci 0000:41:00.0: PME# disabled
pci 0000:41:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:40:0c.0: PCI bridge to [bus 41-43]
pci 0000:40:0c.0: bridge window [io 0x4000-0x4fff]
pci 0000:40:0c.0: bridge window [mem 0xfdf00000-0xfdffffff]
pci 0000:40:0c.0: bridge window [mem 0xfff00000 - 000fffff pref] reg reading
pci 0000:42:08.0: reg 10: [mem 0xfdf80000-0xfdffffff 64bit]
pci 0000:42:08.0: reg 18: [io 0x4000-0x40ff]
pci 0000:42:08.0: reg 1c: [mem 0xfdf70000-0xfdf77fff]
pci 0000:42:08.0: reg 30: [mem 0x00000000-0x00003fff pref]
pci 0000:42:08.0: supports D1
pci 0000:41:00.0: PCI bridge to [bus 42-43]
pci 0000:41:00.0: bridge window [io 0x4000-0x4fff]
pci 0000:41:00.0: bridge window [mem 0xfdf00000-0xfdffffff]
pci 0000:41:00.0: bridge window [mem 0xfff00000 - 000fffff pref] reg reading
pci 0000:42:04.0: PCI bridge to [bus 43-43]
pci 0000:42:04.0: bridge window [io fffffffffffff000 - 0000] reg reading
pci 0000:42:04.0: bridge window [mem 0xfff00000 - 0x000fffff] reg reading
pci 0000:42:04.0: bridge window [mem 0xfff00000 - 000fffff pref] reg reading
pci 0000:40:0d.0: PCI bridge to [bus 44-46]
pci 0000:40:0d.0: bridge window [io fffffffffffff000 - 0000] reg reading
pci 0000:40:0d.0: bridge window [mem 0xfff00000 - 0x000fffff] reg reading
pci 0000:40:0d.0: bridge window [mem 0xfff00000 - 000fffff pref] reg reading
pci 0000:40:0e.0: PCI bridge to [bus 47-49]
pci 0000:40:0e.0: bridge window [io fffffffffffff000 - 0000] reg reading
pci 0000:40:0e.0: bridge window [mem 0xfff00000 - 0x000fffff] reg reading
pci 0000:40:0e.0: bridge window [mem 0xfff00000 - 000fffff pref] reg reading
ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.IPE0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.IPE1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.IPE2.SASB._PRT]
initcall acpi_pci_root_init+0x0/0x2d returned 0 after 177734 usecs
calling acpi_pci_link_init+0x0/0x43 @ 1
ACPI: PCI Interrupt Link [LNKW] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [LNKX] (IRQs 17) *0, disabled.
ACPI: PCI Interrupt Link [LNKY] (IRQs 18) *0, disabled.
ACPI: PCI Interrupt Link [LNKZ] (IRQs 19) *0, disabled.
ACPI: PCI Interrupt Link [LNU0] (IRQs 22) *5
ACPI: PCI Interrupt Link [LNU2] (IRQs 23) *7
ACPI: PCI Interrupt Link [LNKA] (IRQs 54) *0, disabled.
ACPI: PCI Interrupt Link [LNKB] (IRQs 55) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 56) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 57) *0, disabled.
initcall acpi_pci_link_init+0x0/0x43 returned 0 after 28320 usecs
calling pnp_init+0x0/0x12 @ 1
initcall pnp_init+0x0/0x12 returned 0 after 0 usecs
calling setup_shutdown_event+0x0/0x14 @ 1
initcall setup_shutdown_event+0x0/0x14 returned 0 after 0 usecs
calling balloon_init+0x0/0x1b1 @ 1
initcall balloon_init+0x0/0x1b1 returned -19 after 0 usecs
calling misc_init+0x0/0xb8 @ 1
initcall misc_init+0x0/0xb8 returned 0 after 0 usecs
calling vga_arb_device_init+0x0/0x78 @ 1
vgaarb: device added: PCI:0000:01:03.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
initcall vga_arb_device_init+0x0/0x78 returned 0 after 2929 usecs
calling cn_init+0x0/0x9e @ 1
initcall cn_init+0x0/0x9e returned 0 after 0 usecs
calling init_scsi+0x0/0x91 @ 1
SCSI subsystem initialized
initcall init_scsi+0x0/0x91 returned 0 after 976 usecs
calling ata_init+0x0/0x34e @ 1
libata version 3.00 loaded.
initcall ata_init+0x0/0x34e returned 0 after 976 usecs
calling init_pcmcia_cs+0x0/0x25 @ 1
initcall init_pcmcia_cs+0x0/0x25 returned 0 after 0 usecs
calling usb_init+0x0/0x175 @ 1
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
initcall usb_init+0x0/0x175 returned 0 after 2929 usecs
calling serio_init+0x0/0x89 @ 1
initcall serio_init+0x0/0x89 returned 0 after 0 usecs
calling input_init+0x0/0x132 @ 1
initcall input_init+0x0/0x132 returned 0 after 0 usecs
calling rtc_init+0x0/0x71 @ 1
initcall rtc_init+0x0/0x71 returned 0 after 0 usecs
calling power_supply_class_init+0x0/0x38 @ 1
initcall power_supply_class_init+0x0/0x38 returned 0 after 0 usecs
calling thermal_init+0x0/0x40 @ 1
initcall thermal_init+0x0/0x40 returned 0 after 0 usecs
calling md_init+0x0/0xd0 @ 1
initcall md_init+0x0/0xd0 returned 0 after 0 usecs
calling leds_init+0x0/0x40 @ 1
initcall leds_init+0x0/0x40 returned 0 after 0 usecs
calling pci_subsys_init+0x0/0xdb @ 1
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
reserve RAM buffer: 000000000009f400 - 000000000009ffff
reserve RAM buffer: 000000007fe50000 - 000000007fffffff
reserve RAM buffer: 000000027ffff000 - 000000027fffffff initcall pci_subsys_init+0x0/0xdb returned 0 after 4882 usecs
calling proto_init+0x0/0x12 @ 1
initcall proto_init+0x0/0x12 returned 0 after 0 usecs
calling net_dev_init+0x0/0x177 @ 1
initcall net_dev_init+0x0/0x177 returned 0 after 0 usecs
calling neigh_init+0x0/0x71 @ 1
initcall neigh_init+0x0/0x71 returned 0 after 0 usecs
calling fib_rules_init+0x0/0xa6 @ 1
initcall fib_rules_init+0x0/0xa6 returned 0 after 0 usecs
calling pktsched_init+0x0/0xdc @ 1
initcall pktsched_init+0x0/0xdc returned 0 after 0 usecs
calling tc_filter_init+0x0/0x4c @ 1
initcall tc_filter_init+0x0/0x4c returned 0 after 0 usecs
calling tc_action_init+0x0/0x4c @ 1
initcall tc_action_init+0x0/0x4c returned 0 after 0 usecs
calling genl_init+0x0/0x8f @ 1
initcall genl_init+0x0/0x8f returned 0 after 0 usecs
calling cipso_v4_init+0x0/0x67 @ 1
initcall cipso_v4_init+0x0/0x67 returned 0 after 0 usecs
calling wireless_nlevent_init+0x0/0x12 @ 1
initcall wireless_nlevent_init+0x0/0x12 returned 0 after 0 usecs
calling netlbl_init+0x0/0x83 @ 1
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
initcall netlbl_init+0x0/0x83 returned 0 after 3906 usecs
calling sysctl_init+0x0/0x49 @ 1
initcall sysctl_init+0x0/0x49 returned 0 after 0 usecs
calling print_ICs+0x0/0x506 @ 1
initcall print_ICs+0x0/0x506 returned 0 after 0 usecs
calling hpet_late_init+0x0/0x1ed @ 1
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
hpet0: 3 comparators, 32-bit 25.000000 MHz counter
initcall hpet_late_init+0x0/0x1ed returned 0 after 9765 usecs
calling clocksource_done_booting+0x0/0x36 @ 1
Switching to clocksource hpet
initcall clocksource_done_booting+0x0/0x36 returned 0 after 1085 usecs
calling rb_init_debugfs+0x0/0x2f @ 1
initcall rb_init_debugfs+0x0/0x2f returned 0 after 36 usecs
calling tracer_init_debugfs+0x0/0x362 @ 1
initcall tracer_init_debugfs+0x0/0x362 returned 0 after 78 usecs
calling init_trace_printk_function_export+0x0/0x2f @ 1
initcall init_trace_printk_function_export+0x0/0x2f returned 0 after 2 usecs
calling event_trace_init+0x0/0x1eb @ 1
initcall event_trace_init+0x0/0x1eb returned 0 after 1219 usecs
calling init_kprobe_trace+0x0/0x78 @ 1
initcall init_kprobe_trace+0x0/0x78 returned 0 after 3 usecs
calling init_pipe_fs+0x0/0x4c @ 1
initcall init_pipe_fs+0x0/0x4c returned 0 after 24 usecs
calling eventpoll_init+0x0/0xc3 @ 1
initcall eventpoll_init+0x0/0xc3 returned 0 after 6 usecs
calling anon_inode_init+0x0/0x123 @ 1
initcall anon_inode_init+0x0/0x123 returned 0 after 8 usecs
calling blk_scsi_ioctl_init+0x0/0x289 @ 1
initcall blk_scsi_ioctl_init+0x0/0x289 returned 0 after 1 usecs
calling acpi_event_init+0x0/0x80 @ 1
initcall acpi_event_init+0x0/0x80 returned 0 after 21 usecs
calling pnpacpi_init+0x0/0x8c @ 1
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 11 devices
ACPI: ACPI bus type pnp unregistered
initcall pnpacpi_init+0x0/0x8c returned 0 after 62524 usecs
calling pnp_system_init+0x0/0x12 @ 1
system 00:01: [io 0x0408-0x040f] has been reserved
system 00:01: [io 0x04d0-0x04d1] has been reserved
system 00:01: [io 0x0700-0x073f] has been reserved
system 00:01: [io 0x0800-0x08fe] has been reserved
system 00:01: [io 0x0900-0x09fe] has been reserved
system 00:01: [io 0x09ff] has been reserved
system 00:01: [io 0x0a00-0x0afe] has been reserved
system 00:01: [io 0x0aff] has been reserved
system 00:01: [io 0x0b00-0x0bfe] has been reserved
system 00:01: [io 0x0bff] has been reserved
system 00:01: [io 0x0c80-0x0c83] has been reserved
system 00:01: [io 0x0cd4-0x0cd7] has been reserved
system 00:01: [io 0x0f50-0x0f58] has been reserved
system 00:01: [io 0x0ca0-0x0ca1] has been reserved
system 00:01: [io 0x0ca4-0x0ca5] has been reserved
system 00:01: [io 0x0cf9] could not be reserved
system 00:01: [io 0x03f8-0x03ff] has been reserved
system 00:01: [mem 0x80000000-0x8fffffff] could not be reserved
system 00:01: [mem 0xf7df0000-0xf7df0fff] could not be reserved
system 00:01: [mem 0xfdef0000-0xfdef0fff] could not be reserved
initcall pnp_system_init+0x0/0x12 returned 0 after 465887 usecs
calling chr_dev_init+0x0/0xc7 @ 1
initcall chr_dev_init+0x0/0xc7 returned 0 after 533 usecs
calling firmware_class_init+0x0/0x79 @ 1
initcall firmware_class_init+0x0/0x79 returned 0 after 55 usecs
calling init_pcmcia_bus+0x0/0x65 @ 1
initcall init_pcmcia_bus+0x0/0x65 returned 0 after 59 usecs
calling cpufreq_gov_performance_init+0x0/0x12 @ 1
initcall cpufreq_gov_performance_init+0x0/0x12 returned 0 after 1 usecs
calling cpufreq_gov_dbs_init+0x0/0xaf @ 1
initcall cpufreq_gov_dbs_init+0x0/0xaf returned 0 after 136 usecs
calling init_acpi_pm_clocksource+0x0/0xef @ 1
initcall init_acpi_pm_clocksource+0x0/0xef returned 0 after 4426 usecs
calling pcibios_assign_resources+0x0/0x76 @ 1
PCI: max bus depth: 3 pci_try_num: 4
pci 0000:00:0b.0: BAR 9: assigned [mem 0x90000000-0x900fffff pref]
pci 0000:00:0c.0: BAR 9: assigned [mem 0x90100000-0x901fffff pref]
pci 0000:00:0e.0: BAR 9: assigned [mem 0x90200000-0x902fffff pref]
pci 0000:01:03.0: BAR 6: assigned [mem 0xf7e00000-0xf7e1ffff pref]
pci 0000:01:04.2: BAR 6: assigned [mem 0xf7e20000-0xf7e2ffff pref]
pci 0000:00:09.0: PCI bridge to [bus 01-01]
pci 0000:00:09.0: bridge window [io 0x1000-0x2fff]
pci 0000:00:09.0: bridge window [mem 0xf7e00000-0xf7ffffff]
pci 0000:00:09.0: bridge window [mem 0xe8000000-0xefffffff pref]
pci 0000:02:00.0: BAR 9: assigned [mem 0x90000000-0x900fffff pref]
pci 0000:03:00.0: BAR 6: assigned [mem 0x90000000-0x9001ffff pref]
pci 0000:02:00.0: PCI bridge to [bus 03-03]
pci 0000:02:00.0: bridge window [io disabled]
pci 0000:02:00.0: bridge window [mem 0xf8000000-0xf9ffffff]
pci 0000:02:00.0: bridge window [mem 0x90000000-0x900fffff pref]
pci 0000:00:0b.0: PCI bridge to [bus 02-03]
pci 0000:00:0b.0: bridge window [io disabled]
pci 0000:00:0b.0: bridge window [mem 0xf8000000-0xf9ffffff]
pci 0000:00:0b.0: bridge window [mem 0x90000000-0x900fffff pref]
pci 0000:04:00.0: BAR 9: assigned [mem 0x90100000-0x901fffff pref]
pci 0000:05:00.0: BAR 6: assigned [mem 0x90100000-0x9011ffff pref]
pci 0000:04:00.0: PCI bridge to [bus 05-05]
pci 0000:04:00.0: bridge window [io disabled]
pci 0000:04:00.0: bridge window [mem 0xfa000000-0xfbffffff]
pci 0000:04:00.0: bridge window [mem 0x90100000-0x901fffff pref]
pci 0000:00:0c.0: PCI bridge to [bus 04-05]
pci 0000:00:0c.0: bridge window [io disabled]
pci 0000:00:0c.0: bridge window [mem 0xfa000000-0xfbffffff]
pci 0000:00:0c.0: bridge window [mem 0x90100000-0x901fffff pref]
pci 0000:06:00.0: PCI bridge to [bus 07-07]
pci 0000:06:00.0: bridge window [io disabled]
pci 0000:06:00.0: bridge window [mem 0xfdc00000-0xfdcfffff]
pci 0000:06:00.0: bridge window [mem pref disabled]
pci 0000:00:0d.0: PCI bridge to [bus 06-07]
pci 0000:00:0d.0: bridge window [io disabled]
pci 0000:00:0d.0: bridge window [mem 0xfdc00000-0xfdcfffff]
pci 0000:00:0d.0: bridge window [mem pref disabled]
pci 0000:08:00.0: BAR 6: assigned [mem 0x90200000-0x9023ffff pref]
pci 0000:08:00.1: BAR 6: assigned [mem 0x90240000-0x9027ffff pref]
pci 0000:00:0e.0: PCI bridge to [bus 08-0a]
pci 0000:00:0e.0: bridge window [io 0x3000-0x3fff]
pci 0000:00:0e.0: bridge window [mem 0xfdd00000-0xfddfffff]
pci 0000:00:0e.0: bridge window [mem 0x90200000-0x902fffff pref]
pci 0000:40:0c.0: BAR 9: assigned [mem 0x84000000-0x840fffff pref]
pci 0000:41:00.0: BAR 9: assigned [mem 0x84000000-0x840fffff pref]
pci 0000:42:08.0: BAR 6: assigned [mem 0x84000000-0x84003fff pref]
pci 0000:42:04.0: PCI bridge to [bus 43-43]
pci 0000:42:04.0: bridge window [io disabled]
pci 0000:42:04.0: bridge window [mem disabled]
pci 0000:42:04.0: bridge window [mem pref disabled]
pci 0000:41:00.0: PCI bridge to [bus 42-43]
pci 0000:41:00.0: bridge window [io 0x4000-0x4fff]
pci 0000:41:00.0: bridge window [mem 0xfdf00000-0xfdffffff]
pci 0000:41:00.0: bridge window [mem 0x84000000-0x840fffff pref]
pci 0000:40:0c.0: PCI bridge to [bus 41-43]
pci 0000:40:0c.0: bridge window [io 0x4000-0x4fff]
pci 0000:40:0c.0: bridge window [mem 0xfdf00000-0xfdffffff]
pci 0000:40:0c.0: bridge window [mem 0x84000000-0x840fffff pref]
pci 0000:40:0d.0: PCI bridge to [bus 44-46]
pci 0000:40:0d.0: bridge window [io disabled]
pci 0000:40:0d.0: bridge window [mem disabled]
pci 0000:40:0d.0: bridge window [mem pref disabled]
pci 0000:40:0e.0: PCI bridge to [bus 47-49]
pci 0000:40:0e.0: bridge window [io disabled]
pci 0000:40:0e.0: bridge window [mem disabled]
pci 0000:40:0e.0: bridge window [mem pref disabled]
pci 0000:00:09.0: setting latency timer to 64
pci 0000:00:0b.0: setting latency timer to 64
pci 0000:02:00.0: setting latency timer to 64
pci 0000:00:0c.0: setting latency timer to 64
pci 0000:04:00.0: setting latency timer to 64
pci 0000:00:0d.0: setting latency timer to 64
pci 0000:06:00.0: setting latency timer to 64
pci 0000:00:0e.0: setting latency timer to 64
pci 0000:40:0c.0: setting latency timer to 64
pci 0000:41:00.0: setting latency timer to 64
pci 0000:40:0d.0: setting latency timer to 64
pci 0000:40:0e.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io 0x0000-0x3fff]
pci_bus 0000:00: resource 5 [mem 0x90000000-0xfddfffff]
pci_bus 0000:00: resource 6 [mem 0x80000000-0x83ffffff]
pci_bus 0000:00: resource 7 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 8 [mem 0xfe000000-0xffffffff]
pci_bus 0000:00: resource 9 [mem 0x280000000-0xfcffffffff]
pci_bus 0000:01: resource 0 [io 0x1000-0x2fff]
pci_bus 0000:01: resource 1 [mem 0xf7e00000-0xf7ffffff]
pci_bus 0000:01: resource 2 [mem 0xe8000000-0xefffffff pref]
pci_bus 0000:01: resource 4 [io 0x0000-0x3fff]
pci_bus 0000:01: resource 5 [mem 0x90000000-0xfddfffff]
pci_bus 0000:01: resource 6 [mem 0x80000000-0x83ffffff]
pci_bus 0000:01: resource 7 [mem 0x000a0000-0x000bffff]
pci_bus 0000:01: resource 8 [mem 0xfe000000-0xffffffff]
pci_bus 0000:01: resource 9 [mem 0x280000000-0xfcffffffff]
pci_bus 0000:02: resource 1 [mem 0xf8000000-0xf9ffffff]
pci_bus 0000:02: resource 2 [mem 0x90000000-0x900fffff pref]
pci_bus 0000:03: resource 1 [mem 0xf8000000-0xf9ffffff]
pci_bus 0000:03: resource 2 [mem 0x90000000-0x900fffff pref]
pci_bus 0000:04: resource 1 [mem 0xfa000000-0xfbffffff]
pci_bus 0000:04: resource 2 [mem 0x90100000-0x901fffff pref]
pci_bus 0000:05: resource 1 [mem 0xfa000000-0xfbffffff]
pci_bus 0000:05: resource 2 [mem 0x90100000-0x901fffff pref]
pci_bus 0000:06: resource 1 [mem 0xfdc00000-0xfdcfffff]
pci_bus 0000:07: resource 1 [mem 0xfdc00000-0xfdcfffff]
pci_bus 0000:08: resource 0 [io 0x3000-0x3fff]
pci_bus 0000:08: resource 1 [mem 0xfdd00000-0xfddfffff]
pci_bus 0000:08: resource 2 [mem 0x90200000-0x902fffff pref]
pci_bus 0000:40: resource 4 [io 0x4000-0xffff]
pci_bus 0000:40: resource 5 [mem 0xfde00000-0xfdffffff]
pci_bus 0000:40: resource 6 [mem 0x84000000-0x8fffffff]
pci_bus 0000:41: resource 0 [io 0x4000-0x4fff]
pci_bus 0000:41: resource 1 [mem 0xfdf00000-0xfdffffff]
pci_bus 0000:41: resource 2 [mem 0x84000000-0x840fffff pref]
pci_bus 0000:42: resource 0 [io 0x4000-0x4fff]
pci_bus 0000:42: resource 1 [mem 0xfdf00000-0xfdffffff]
pci_bus 0000:42: resource 2 [mem 0x84000000-0x840fffff pref]
initcall pcibios_assign_resources+0x0/0x76 returned 0 after 2559959 usecs
calling sysctl_core_init+0x0/0x38 @ 1
initcall sysctl_core_init+0x0/0x38 returned 0 after 8 usecs
calling inet_init+0x0/0x204 @ 1
NET: Registered protocol family 2
IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP reno registered
UDP hash table entries: 4096 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
initcall inet_init+0x0/0x204 returned 0 after 180614 usecs
calling af_unix_init+0x0/0x55 @ 1
NET: Registered protocol family 1
initcall af_unix_init+0x0/0x55 returned 0 after 17601 usecs
calling pci_apply_final_quirks+0x0/0xef @ 1
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:0b.0: Found disabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:0c.0: Found enabled HT MSI Mapping
pci 0000:00:0d.0: Found enabled HT MSI Mapping
pci 0000:00:0e.0: Found enabled HT MSI Mapping
pci 0000:01:03.0: Boot video device
pci 0000:01:04.4: HCRESET not completed yet!
pci 0000:40:0c.0: Found enabled HT MSI Mapping
pci 0000:40:0d.0: Found enabled HT MSI Mapping
pci 0000:40:0e.0: Found enabled HT MSI Mapping
PCI: CLS 64 bytes, default 64
initcall pci_apply_final_quirks+0x0/0xef returned 0 after 254972 usecs
calling populate_rootfs+0x0/0x237 @ 1
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 2531k freed
initcall populate_rootfs+0x0/0x237 returned 0 after 92457 usecs
calling pci_iommu_init+0x0/0x31 @ 1
PCI-DMA: Disabling AGP.
PCI-DMA: aperture base @ 20000000 size 65536 KB
PCI-DMA: using GART IOMMU.
PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
initcall pci_iommu_init+0x0/0x31 returned 0 after 71931 usecs
calling calgary_fixup_tce_spaces+0x0/0xee @ 1
initcall calgary_fixup_tce_spaces+0x0/0xee returned -19 after 0 usecs
calling i8259A_init_sysfs+0x0/0x22 @ 1
initcall i8259A_init_sysfs+0x0/0x22 returned 0 after 144 usecs
calling vsyscall_init+0x0/0x6c @ 1
initcall vsyscall_init+0x0/0x6c returned 0 after 13 usecs
calling sbf_init+0x0/0xd7 @ 1
initcall sbf_init+0x0/0xd7 returned 0 after 0 usecs
calling i8237A_init_sysfs+0x0/0x22 @ 1
initcall i8237A_init_sysfs+0x0/0x22 returned 0 after 105 usecs
calling add_rtc_cmos+0x0/0xa4 @ 1
platform rtc_cmos: registered platform RTC device (no PNP device found)
initcall add_rtc_cmos+0x0/0xa4 returned 0 after 11965 usecs
calling cache_sysfs_init+0x0/0x59 @ 1
initcall cache_sysfs_init+0x0/0x59 returned 0 after 924 usecs
calling mcheck_init_device+0x0/0xf2 @ 1
initcall mcheck_init_device+0x0/0xf2 returned 0 after 363 usecs
calling threshold_init_device+0x0/0x44 @ 1
initcall threshold_init_device+0x0/0x44 returned 0 after 1 usecs
calling thermal_throttle_init_device+0x0/0x89 @ 1
initcall thermal_throttle_init_device+0x0/0x89 returned 0 after 0 usecs
calling msr_init+0x0/0x10b @ 1
initcall msr_init+0x0/0x10b returned 0 after 303 usecs
calling cpuid_init+0x0/0x10b @ 1
initcall cpuid_init+0x0/0x10b returned 0 after 282 usecs
calling ioapic_init_sysfs+0x0/0x99 @ 1
initcall ioapic_init_sysfs+0x0/0x99 returned 0 after 165 usecs
calling add_pcspkr+0x0/0x28 @ 1
initcall add_pcspkr+0x0/0x28 returned 0 after 62 usecs
calling audit_classes_init+0x0/0xaf @ 1
initcall audit_classes_init+0x0/0xaf returned 0 after 7 usecs
calling init_vdso_vars+0x0/0x19d @ 1
initcall init_vdso_vars+0x0/0x19d returned 0 after 15 usecs
calling ia32_binfmt_init+0x0/0x14 @ 1
initcall ia32_binfmt_init+0x0/0x14 returned 0 after 1 usecs
calling sysenter_setup+0x0/0x2cc @ 1
initcall sysenter_setup+0x0/0x2cc returned 0 after 5 usecs
calling init_sched_debug_procfs+0x0/0x29 @ 1
initcall init_sched_debug_procfs+0x0/0x29 returned 0 after 7 usecs
calling proc_schedstat_init+0x0/0x1f @ 1
initcall proc_schedstat_init+0x0/0x1f returned 0 after 1 usecs
calling proc_execdomains_init+0x0/0x22 @ 1
initcall proc_execdomains_init+0x0/0x22 returned 0 after 2 usecs
calling ioresources_init+0x0/0x36 @ 1
initcall ioresources_init+0x0/0x36 returned 0 after 3 usecs
calling uid_cache_init+0x0/0x6e @ 1
initcall uid_cache_init+0x0/0x6e returned 0 after 8 usecs
calling init_posix_timers+0x0/0x1b5 @ 1
initcall init_posix_timers+0x0/0x1b5 returned 0 after 2 usecs
calling init_posix_cpu_timers+0x0/0x101 @ 1
initcall init_posix_cpu_timers+0x0/0x101 returned 0 after 1 usecs
calling nsproxy_cache_init+0x0/0x2d @ 1
initcall nsproxy_cache_init+0x0/0x2d returned 0 after 1 usecs
calling create_proc_profile+0x0/0x236 @ 1
initcall create_proc_profile+0x0/0x236 returned 0 after 0 usecs
calling timekeeping_init_device+0x0/0x22 @ 1
initcall timekeeping_init_device+0x0/0x22 returned 0 after 111 usecs
calling init_clocksource_sysfs+0x0/0x50 @ 1
initcall init_clocksource_sysfs+0x0/0x50 returned 0 after 107 usecs
calling init_timer_list_procfs+0x0/0x2c @ 1
initcall init_timer_list_procfs+0x0/0x2c returned 0 after 2 usecs
calling init_tstats_procfs+0x0/0x2c @ 1
initcall init_tstats_procfs+0x0/0x2c returned 0 after 2 usecs
calling futex_init+0x0/0x63 @ 1
initcall futex_init+0x0/0x63 returned 0 after 10 usecs
calling proc_dma_init+0x0/0x22 @ 1
initcall proc_dma_init+0x0/0x22 returned 0 after 1 usecs
calling proc_modules_init+0x0/0x22 @ 1
initcall proc_modules_init+0x0/0x22 returned 0 after 2 usecs
calling kallsyms_init+0x0/0x25 @ 1
initcall kallsyms_init+0x0/0x25 returned 0 after 1 usecs
calling snapshot_device_init+0x0/0x12 @ 1
initcall snapshot_device_init+0x0/0x12 returned 0 after 61 usecs
calling crash_save_vmcoreinfo_init+0x0/0x46d @ 1
initcall crash_save_vmcoreinfo_init+0x0/0x46d returned 0 after 22 usecs
calling crash_notes_memory_init+0x0/0x36 @ 1
initcall crash_notes_memory_init+0x0/0x36 returned 0 after 6 usecs
calling pid_namespaces_init+0x0/0x2d @ 1
initcall pid_namespaces_init+0x0/0x2d returned 0 after 8 usecs
calling ikconfig_init+0x0/0x39 @ 1
initcall ikconfig_init+0x0/0x39 returned 0 after 2 usecs
calling audit_init+0x0/0x133 @ 1
audit: initializing netlink socket (disabled)
type=2000 audit(1268057623.500:1): initialized
initcall audit_init+0x0/0x133 returned 0 after 27144 usecs
calling audit_tree_init+0x0/0x49 @ 1
initcall audit_tree_init+0x0/0x49 returned 0 after 2 usecs
calling init_kprobes+0x0/0x182 @ 1
initcall init_kprobes+0x0/0x182 returned 0 after 16018 usecs
calling hung_task_init+0x0/0x53 @ 1
initcall hung_task_init+0x0/0x53 returned 0 after 41 usecs
calling utsname_sysctl_init+0x0/0x14 @ 1
initcall utsname_sysctl_init+0x0/0x14 returned 0 after 2 usecs
calling init_tracepoints+0x0/0x12 @ 1
initcall init_tracepoints+0x0/0x12 returned 0 after 0 usecs
calling init_lstats_procfs+0x0/0x25 @ 1
initcall init_lstats_procfs+0x0/0x25 returned 0 after 3 usecs
calling init_events+0x0/0x5f @ 1
initcall init_events+0x0/0x5f returned 0 after 2 usecs
calling init_sched_switch_trace+0x0/0x12 @ 1
initcall init_sched_switch_trace+0x0/0x12 returned 0 after 2 usecs
calling init_stack_trace+0x0/0x12 @ 1
initcall init_stack_trace+0x0/0x12 returned 0 after 1 usecs
calling init_irqsoff_tracer+0x0/0x14 @ 1
initcall init_irqsoff_tracer+0x0/0x14 returned 0 after 0 usecs
calling init_wakeup_tracer+0x0/0x22 @ 1
initcall init_wakeup_tracer+0x0/0x22 returned 0 after 1 usecs
calling init_blk_tracer+0x0/0x57 @ 1
initcall init_blk_tracer+0x0/0x57 returned 0 after 1 usecs
calling perf_event_sysfs_init+0x0/0x19 @ 1
initcall perf_event_sysfs_init+0x0/0x19 returned 0 after 3 usecs
calling init_per_zone_wmark_min+0x0/0x70 @ 1
initcall init_per_zone_wmark_min+0x0/0x70 returned 0 after 488 usecs
calling kswapd_init+0x0/0x4d @ 1
initcall kswapd_init+0x0/0x4d returned 0 after 80 usecs
calling setup_vmstat+0x0/0xae @ 1
initcall setup_vmstat+0x0/0xae returned 0 after 13 usecs
calling mm_sysfs_init+0x0/0x29 @ 1
initcall mm_sysfs_init+0x0/0x29 returned 0 after 3 usecs
calling proc_vmalloc_init+0x0/0x25 @ 1
initcall proc_vmalloc_init+0x0/0x25 returned 0 after 2 usecs
calling procswaps_init+0x0/0x22 @ 1
initcall procswaps_init+0x0/0x22 returned 0 after 2 usecs
calling hugetlb_init+0x0/0x329 @ 1
HugeTLB registered 2 MB page size, pre-allocated 0 pages
initcall hugetlb_init+0x0/0x329 returned 0 after 27375 usecs
calling slab_proc_init+0x0/0x25 @ 1
initcall slab_proc_init+0x0/0x25 returned 0 after 2 usecs
calling slab_sysfs_init+0x0/0xf0 @ 1
initcall slab_sysfs_init+0x0/0xf0 returned 0 after 3460 usecs
calling fasync_init+0x0/0x2a @ 1
initcall fasync_init+0x0/0x2a returned 0 after 3 usecs
calling proc_filesystems_init+0x0/0x22 @ 1
initcall proc_filesystems_init+0x0/0x22 returned 0 after 3 usecs
calling dnotify_init+0x0/0x80 @ 1
initcall dnotify_init+0x0/0x80 returned 0 after 8 usecs
calling inotify_setup+0x0/0x12 @ 1
initcall inotify_setup+0x0/0x12 returned 0 after 0 usecs
calling inotify_user_setup+0x0/0x70 @ 1
initcall inotify_user_setup+0x0/0x70 returned 0 after 6 usecs
calling aio_setup+0x0/0x9e @ 1
initcall aio_setup+0x0/0x9e returned 0 after 146 usecs
calling proc_locks_init+0x0/0x22 @ 1
initcall proc_locks_init+0x0/0x22 returned 0 after 2 usecs
calling init_sys32_ioctl+0x0/0x28 @ 1
initcall init_sys32_ioctl+0x0/0x28 returned 0 after 73 usecs
calling init_mbcache+0x0/0x14 @ 1
initcall init_mbcache+0x0/0x14 returned 0 after 1 usecs
calling dquot_init+0x0/0xe0 @ 1
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
initcall dquot_init+0x0/0xe0 returned 0 after 28692 usecs
calling init_v2_quota_format+0x0/0x22 @ 1
initcall init_v2_quota_format+0x0/0x22 returned 0 after 1 usecs
calling quota_init+0x0/0x26 @ 1
initcall quota_init+0x0/0x26 returned 0 after 7 usecs
calling proc_cmdline_init+0x0/0x22 @ 1
initcall proc_cmdline_init+0x0/0x22 returned 0 after 3 usecs
calling proc_cpuinfo_init+0x0/0x22 @ 1
initcall proc_cpuinfo_init+0x0/0x22 returned 0 after 2 usecs
calling proc_devices_init+0x0/0x22 @ 1
initcall proc_devices_init+0x0/0x22 returned 0 after 1 usecs
calling proc_interrupts_init+0x0/0x22 @ 1
initcall proc_interrupts_init+0x0/0x22 returned 0 after 1 usecs
calling proc_loadavg_init+0x0/0x22 @ 1
initcall proc_loadavg_init+0x0/0x22 returned 0 after 2 usecs
calling proc_meminfo_init+0x0/0x22 @ 1
initcall proc_meminfo_init+0x0/0x22 returned 0 after 2 usecs
calling proc_stat_init+0x0/0x22 @ 1
initcall proc_stat_init+0x0/0x22 returned 0 after 1 usecs
calling proc_uptime_init+0x0/0x22 @ 1
initcall proc_uptime_init+0x0/0x22 returned 0 after 2 usecs
calling proc_version_init+0x0/0x22 @ 1
initcall proc_version_init+0x0/0x22 returned 0 after 3 usecs
calling proc_softirqs_init+0x0/0x22 @ 1
initcall proc_softirqs_init+0x0/0x22 returned 0 after 3 usecs
calling proc_kcore_init+0x0/0xa9 @ 1
initcall proc_kcore_init+0x0/0xa9 returned 0 after 10 usecs
calling vmcore_init+0x0/0x8e2 @ 1
initcall vmcore_init+0x0/0x8e2 returned 0 after 0 usecs
calling proc_kmsg_init+0x0/0x25 @ 1
initcall proc_kmsg_init+0x0/0x25 returned 0 after 2 usecs
calling proc_page_init+0x0/0x3c @ 1
initcall proc_page_init+0x0/0x3c returned 0 after 3 usecs
calling init_devpts_fs+0x0/0x4d @ 1
initcall init_devpts_fs+0x0/0x4d returned 0 after 17 usecs
calling init_ext3_fs+0x0/0x6b @ 1
initcall init_ext3_fs+0x0/0x6b returned 0 after 149 usecs
calling journal_init+0x0/0x99 @ 1
initcall journal_init+0x0/0x99 returned 0 after 354 usecs
calling init_ramfs_fs+0x0/0x12 @ 1
initcall init_ramfs_fs+0x0/0x12 returned 0 after 5 usecs
calling init_hugetlbfs_fs+0x0/0x98 @ 1
initcall init_hugetlbfs_fs+0x0/0x98 returned 0 after 120 usecs
calling init_iso9660_fs+0x0/0x6c @ 1
initcall init_iso9660_fs+0x0/0x6c returned 0 after 89 usecs
calling init_nls_cp437+0x0/0x12 @ 1
initcall init_nls_cp437+0x0/0x12 returned 0 after 1 usecs
calling init_nls_ascii+0x0/0x12 @ 1
initcall init_nls_ascii+0x0/0x12 returned 0 after 0 usecs
calling ipc_init+0x0/0x23 @ 1
msgmni has been set to 16001
initcall ipc_init+0x0/0x23 returned 0 after 14291 usecs
calling ipc_sysctl_init+0x0/0x14 @ 1
initcall ipc_sysctl_init+0x0/0x14 returned 0 after 2 usecs
calling init_mqueue_fs+0x0/0xb4 @ 1
initcall init_mqueue_fs+0x0/0xb4 returned 0 after 99 usecs
calling key_proc_init+0x0/0x53 @ 1
initcall key_proc_init+0x0/0x53 returned 0 after 4 usecs
calling selinux_nf_ip_init+0x0/0x60 @ 1
initcall selinux_nf_ip_init+0x0/0x60 returned 0 after 0 usecs
calling init_sel_fs+0x0/0x69 @ 1
initcall init_sel_fs+0x0/0x69 returned 0 after 0 usecs
calling selnl_init+0x0/0x4d @ 1
initcall selnl_init+0x0/0x4d returned 0 after 4 usecs
calling sel_netif_init+0x0/0x66 @ 1
initcall sel_netif_init+0x0/0x66 returned 0 after 0 usecs
calling sel_netnode_init+0x0/0x72 @ 1
initcall sel_netnode_init+0x0/0x72 returned 0 after 0 usecs
calling sel_netport_init+0x0/0x72 @ 1
initcall sel_netport_init+0x0/0x72 returned 0 after 0 usecs
calling aurule_init+0x0/0x37 @ 1
initcall aurule_init+0x0/0x37 returned 0 after 1 usecs
calling crypto_wq_init+0x0/0x2e @ 1
initcall crypto_wq_init+0x0/0x2e returned 0 after 128 usecs
calling crypto_algapi_init+0x0/0xd @ 1
initcall crypto_algapi_init+0x0/0xd returned 0 after 2 usecs
calling skcipher_module_init+0x0/0x34 @ 1
initcall skcipher_module_init+0x0/0x34 returned 0 after 0 usecs
calling chainiv_module_init+0x0/0x12 @ 1
initcall chainiv_module_init+0x0/0x12 returned 0 after 2 usecs
calling eseqiv_module_init+0x0/0x12 @ 1
initcall eseqiv_module_init+0x0/0x12 returned 0 after 0 usecs
calling hmac_module_init+0x0/0x12 @ 1
initcall hmac_module_init+0x0/0x12 returned 0 after 11 usecs
calling md5_mod_init+0x0/0x12 @ 1
initcall md5_mod_init+0x0/0x12 returned 0 after 82 usecs
calling sha1_generic_mod_init+0x0/0x12 @ 1
initcall sha1_generic_mod_init+0x0/0x12 returned 0 after 52 usecs
calling krng_mod_init+0x0/0x12 @ 1
alg: No test for stdrng (krng)
initcall krng_mod_init+0x0/0x12 returned 0 after 2118 usecs
calling proc_genhd_init+0x0/0x36 @ 1
initcall proc_genhd_init+0x0/0x36 returned 0 after 3 usecs
calling bsg_init+0x0/0x12e @ 1
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
initcall bsg_init+0x0/0x12e returned 0 after 33601 usecs
calling noop_init+0x0/0x14 @ 1
io scheduler noop registered
initcall noop_init+0x0/0x14 returned 0 after 2948 usecs
calling deadline_init+0x0/0x14 @ 1
io scheduler deadline registered
initcall deadline_init+0x0/0x14 returned 0 after 15638 usecs
calling cfq_init+0x0/0x94 @ 1
io scheduler cfq registered (default)
initcall cfq_init+0x0/0x94 returned 0 after 12038 usecs
calling percpu_counter_startup+0x0/0x19 @ 1
initcall percpu_counter_startup+0x0/0x19 returned 0 after 1 usecs
calling pci_proc_init+0x0/0x6a @ 1
initcall pci_proc_init+0x0/0x6a returned 0 after 108 usecs
calling pcie_portdrv_init+0x0/0x58 @ 1
pcieport 0000:00:0b.0: setting latency timer to 64
pcieport 0000:00:0b.0: irq 62 for MSI/MSI-X
pcieport 0000:00:0c.0: setting latency timer to 64
pcieport 0000:00:0c.0: irq 63 for MSI/MSI-X
pcieport 0000:00:0d.0: setting latency timer to 64
pcieport 0000:00:0d.0: irq 64 for MSI/MSI-X
pcieport 0000:00:0e.0: setting latency timer to 64
pcieport 0000:00:0e.0: irq 65 for MSI/MSI-X
pcieport 0000:40:0c.0: setting latency timer to 64
pcieport 0000:40:0c.0: irq 66 for MSI/MSI-X
pcieport 0000:40:0d.0: setting latency timer to 64
pcieport 0000:40:0d.0: irq 67 for MSI/MSI-X
pcieport 0000:40:0e.0: setting latency timer to 64
pcieport 0000:40:0e.0: irq 68 for MSI/MSI-X
initcall pcie_portdrv_init+0x0/0x58 returned 0 after 254621 usecs
calling aer_service_init+0x0/0x2b @ 1
aer 0000:00:0b.0:pcie02: AER service couldn't init device: no _OSC support
aer 0000:00:0c.0:pcie02: AER service couldn't init device: no _OSC support
aer 0000:00:0d.0:pcie02: AER service couldn't init device: no _OSC support
aer 0000:00:0e.0:pcie02: AER service couldn't init device: no _OSC support
aer 0000:40:0c.0:pcie02: AER service couldn't init device: no _OSC support
aer 0000:40:0d.0:pcie02: AER service couldn't init device: no _OSC support
aer 0000:40:0e.0:pcie02: AER service couldn't init device: no _OSC support
initcall aer_service_init+0x0/0x2b returned 0 after 226624 usecs
calling ioapic_init+0x0/0x1b @ 1
initcall ioapic_init+0x0/0x1b returned 0 after 58 usecs
calling pci_hotplug_init+0x0/0x1d @ 1
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
initcall pci_hotplug_init+0x0/0x1d returned 0 after 24360 usecs
calling acpiphp_init+0x0/0x5f @ 1
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
initcall acpiphp_init+0x0/0x5f returned -19 after 28274 usecs
calling fb_console_init+0x0/0x12a @ 1
initcall fb_console_init+0x0/0x12a returned 0 after 59 usecs
calling genericbl_init+0x0/0x12 @ 1
initcall genericbl_init+0x0/0x12 returned 0 after 55 usecs
calling xenfb_init+0x0/0x44 @ 1
initcall xenfb_init+0x0/0x44 returned -19 after 0 usecs
calling vesafb_init+0x0/0x235 @ 1
initcall vesafb_init+0x0/0x235 returned 0 after 123 usecs
calling efifb_init+0x0/0x1f2 @ 1
initcall efifb_init+0x0/0x1f2 returned -19 after 3 usecs
calling acpi_reserve_resources+0x0/0xeb @ 1
initcall acpi_reserve_resources+0x0/0xeb returned 0 after 4 usecs
calling irqrouter_init_sysfs+0x0/0x38 @ 1
initcall irqrouter_init_sysfs+0x0/0x38 returned 0 after 103 usecs
calling acpi_button_init+0x0/0x56 @ 1
input: Power Button as /class/input/input0
ACPI: Power Button [PWRF]
initcall acpi_button_init+0x0/0x56 returned 0 after 34921 usecs
calling acpi_fan_init+0x0/0x56 @ 1
initcall acpi_fan_init+0x0/0x56 returned 0 after 66 usecs
calling acpi_processor_init+0x0/0x10a @ 1
initcall acpi_processor_init+0x0/0x10a returned 0 after 661 usecs
calling acpi_container_init+0x0/0x4a @ 1
initcall acpi_container_init+0x0/0x4a returned 0 after 1065 usecs
calling acpi_thermal_init+0x0/0x7b @ 1
initcall acpi_thermal_init+0x0/0x7b returned 0 after 70 usecs
calling evtchn_init+0x0/0x61 @ 1
initcall evtchn_init+0x0/0x61 returned -19 after 0 usecs
calling xenfs_init+0x0/0x2d @ 1
XENFS: not registering filesystem on non-xen platform
initcall xenfs_init+0x0/0x2d returned 0 after 27283 usecs
calling hypervisor_subsys_init+0x0/0x25 @ 1
initcall hypervisor_subsys_init+0x0/0x25 returned -19 after 0 usecs
calling hyper_sysfs_init+0x0/0xb3 @ 1
initcall hyper_sysfs_init+0x0/0xb3 returned -19 after 0 usecs
calling rand_initialize+0x0/0x2c @ 1
initcall rand_initialize+0x0/0x2c returned 0 after 16 usecs
calling tty_init+0x0/0xf5 @ 1
initcall tty_init+0x0/0xf5 returned 0 after 3751 usecs
calling pty_init+0x0/0x284 @ 1
initcall pty_init+0x0/0x284 returned 0 after 71 usecs
calling sysrq_init+0x0/0x25 @ 1
initcall sysrq_init+0x0/0x25 returned 0 after 15 usecs
calling xen_init+0x0/0x78 @ 1
initcall xen_init+0x0/0x78 returned -19 after 0 usecs
calling raw_init+0x0/0xe5 @ 1
initcall raw_init+0x0/0xe5 returned 0 after 103 usecs
calling hpet_init+0x0/0x6a @ 1
initcall hpet_init+0x0/0x6a returned 0 after 241 usecs
calling nvram_init+0x0/0x82 @ 1
Non-volatile memory driver v1.3
initcall nvram_init+0x0/0x82 returned 0 after 16570 usecs
calling mod_init+0x0/0x4d @ 1
initcall mod_init+0x0/0x4d returned -19 after 0 usecs
calling agp_init+0x0/0x26 @ 1
Linux agpgart interface v0.103
initcall agp_init+0x0/0x26 returned 0 after 15625 usecs
calling agp_amd64_mod_init+0x0/0x22 @ 1
initcall agp_amd64_mod_init+0x0/0x22 returned -19 after 0 usecs
calling agp_intel_init+0x0/0x29 @ 1
initcall agp_intel_init+0x0/0x29 returned 0 after 78 usecs
calling agp_sis_init+0x0/0x29 @ 1
initcall agp_sis_init+0x0/0x29 returned 0 after 57 usecs
calling agp_via_init+0x0/0x29 @ 1
initcall agp_via_init+0x0/0x29 returned 0 after 58 usecs
calling drm_core_init+0x0/0x124 @ 1
[drm] Initialized drm 1.1.0 20060810
initcall drm_core_init+0x0/0x124 returned 0 after 18225 usecs
calling cn_proc_init+0x0/0x3d @ 1
initcall cn_proc_init+0x0/0x3d returned 0 after 2 usecs
calling serial8250_init+0x0/0x161 @ 1
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
async_waiting @ 1
async_continuing @ 1 after 0 usec
async_waiting @ 1
async_continuing @ 1 after 0 usec
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
async_waiting @ 1
async_continuing @ 1 after 0 usec
async_waiting @ 1
async_continuing @ 1 after 0 usec
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
initcall serial8250_init+0x0/0x161 returned 0 after 646274 usecs
calling serial8250_pnp_init+0x0/0x12 @ 1
00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
initcall serial8250_pnp_init+0x0/0x12 returned 0 after 20884 usecs
calling serial8250_pci_init+0x0/0x1b @ 1
initcall serial8250_pci_init+0x0/0x1b returned 0 after 112 usecs
calling init_kgdboc+0x0/0x16 @ 1
initcall init_kgdboc+0x0/0x16 returned 0 after 1 usecs
calling topology_sysfs_init+0x0/0x4e @ 1
initcall topology_sysfs_init+0x0/0x4e returned 0 after 24 usecs
calling brd_init+0x0/0x160 @ 1
brd: module loaded
initcall brd_init+0x0/0x160 returned 0 after 10805 usecs
calling loop_init+0x0/0x189 @ 1
loop: module loaded
initcall loop_init+0x0/0x189 returned 0 after 10745 usecs
calling init_kgdbts+0x0/0x16 @ 1
initcall init_kgdbts+0x0/0x16 returned 0 after 1 usecs
calling mac_hid_init+0x0/0x22 @ 1
initcall mac_hid_init+0x0/0x22 returned 0 after 5 usecs
calling scsi_dh_init+0x0/0x3f @ 1
initcall scsi_dh_init+0x0/0x3f returned 0 after 1 usecs
calling init_sd+0x0/0x181 @ 1
initcall init_sd+0x0/0x181 returned 0 after 127 usecs
calling init_sr+0x0/0x49 @ 1
initcall init_sr+0x0/0x49 returned 0 after 51 usecs
calling init_sg+0x0/0x122 @ 1
initcall init_sg+0x0/0x122 returned 0 after 66 usecs
calling ahci_init+0x0/0x1b @ 1
initcall ahci_init+0x0/0x1b returned 0 after 150 usecs
calling bnx2_init+0x0/0x1b @ 1
bnx2: Broadcom NetXtreme II Gigabit Ethernet Driver bnx2 v2.0.8 (Feb 15, 2010)
ACPI: PCI Interrupt Link [LNKX] enabled at IRQ 17
bnx2 0000:03:00.0: PCI INT A -> Link[LNKX] -> GSI 17 (level, high) -> IRQ 17
bnx2 0000:03:00.0: firmware: using built-in firmware bnx2/bnx2-mips-06-5.0.0.j6.fw
bnx2 0000:03:00.0: firmware: using built-in firmware bnx2/bnx2-rv2p-06-5.0.0.j3.fw
bnx2 0000:03:00.0: eth0: Broadcom NetXtreme II BCM5708 1000Base-SX (B2) PCI-X 64-bit 133MHz found at mem f8000000, IRQ 17, node addr 00:18:fe:35:26:f6
ACPI: PCI Interrupt Link [LNKW] enabled at IRQ 16
bnx2 0000:05:00.0: PCI INT A -> Link[LNKW] -> GSI 16 (level, high) -> IRQ 16
bnx2 0000:05:00.0: firmware: using built-in firmware bnx2/bnx2-mips-06-5.0.0.j6.fw
bnx2 0000:05:00.0: firmware: using built-in firmware bnx2/bnx2-rv2p-06-5.0.0.j3.fw
bnx2 0000:05:00.0: eth1: Broadcom NetXtreme II BCM5708 1000Base-SX (B2) PCI-X 64-bit 133MHz found at mem fa000000, IRQ 16, node addr 00:18:fe:35:26:f4
initcall bnx2_init+0x0/0x1b returned 0 after 484064 usecs
calling net_olddevs_init+0x0/0xa0 @ 1
initcall net_olddevs_init+0x0/0xa0 returned 0 after 5 usecs
calling init_netconsole+0x0/0x1dd @ 1
netconsole: local port 56816
netconsole: local IP 139.185.50.77
netconsole: interface eth0
netconsole: remote port 56816
netconsole: remote IP 139.185.50.76
netconsole: remote ethernet address 00:18:fe:34:1c:3d
netconsole: device eth0 not up yet, forcing it
bnx2 0000:03:00.0: irq 69 for MSI/MSI-X
bnx2 0000:03:00.0: eth0: using MSI
bnx2 0000:03:00.0: eth0: NIC SerDes Link is Up, 1000 Mbps full duplex
netconsole: carrier detect appears untrustworthy, waiting 4 seconds
, receive & transmit flow control ON
bnx2 0000:03:00.0: eth0: NIC SerDes Link is Down
bnx2 0000:03:00.0: eth0: NIC SerDes Link is Up, 1000 Mbps full duplex, receive & transmit flow control ON
Clocksource tsc unstable (delta = 4398045021716 ns)
console [netcon0] enabled
netconsole: network logging started
initcall init_netconsole+0x0/0x1dd returned 0 after 34690244 usecs
calling cdrom_init+0x0/0xd @ 1
initcall cdrom_init+0x0/0xd returned 0 after 16 usecs
calling mon_init+0x0/0x103 @ 1
initcall mon_init+0x0/0x103 returned 0 after 164 usecs
calling i8042_init+0x0/0x3f9 @ 1
PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
initcall i8042_init+0x0/0x3f9 returned 0 after 54763 usecs
calling serport_init+0x0/0x34 @ 1
initcall serport_init+0x0/0x34 returned 0 after 1 usecs
calling mousedev_init+0x0/0x61 @ 1
mice: PS/2 mouse device common for all mice
initcall mousedev_init+0x0/0x61 returned 0 after 21870 usecs
calling evdev_init+0x0/0x12 @ 1
initcall evdev_init+0x0/0x12 returned 0 after 80 usecs
calling atkbd_init+0x0/0x27 @ 1
initcall atkbd_init+0x0/0x27 returned 0 after 72 usecs
calling psmouse_init+0x0/0x7a @ 1
initcall psmouse_init+0x0/0x7a returned 0 after 118 usecs
calling xenkbd_init+0x0/0x44 @ 1
initcall xenkbd_init+0x0/0x44 returned -19 after 0 usecs
calling cmos_init+0x0/0x6d @ 1
rtc_cmos rtc_cmos: RTC can wake from S4
rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
initcall cmos_init+0x0/0x6d returned 0 after 67169 usecs
calling dm_init+0x0/0x49 @ 1
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com
initcall dm_init+0x0/0x49 returned 0 after 36628 usecs
calling cpufreq_gov_powersave_init+0x0/0x12 @ 1
initcall cpufreq_gov_powersave_init+0x0/0x12 returned 0 after 1 usecs
calling cpufreq_gov_userspace_init+0x0/0x12 @ 1
initcall cpufreq_gov_userspace_init+0x0/0x12 returned 0 after 0 usecs
calling cpufreq_gov_dbs_init+0x0/0x64 @ 1
initcall cpufreq_gov_dbs_init+0x0/0x64 returned 0 after 131 usecs
calling init_ladder+0x0/0x12 @ 1
cpuidle: using governor ladder
initcall init_ladder+0x0/0x12 returned 0 after 14625 usecs
calling init_menu+0x0/0x12 @ 1
cpuidle: using governor menu
initcall init_menu+0x0/0x12 returned 0 after 14685 usecs
calling efivars_init+0x0/0x1f9 @ 1
initcall efivars_init+0x0/0x1f9 returned -19 after 0 usecs
calling hid_init+0x0/0x66 @ 1
initcall hid_init+0x0/0x66 returned 0 after 146 usecs
calling a4_init+0x0/0x1b @ 1
initcall a4_init+0x0/0x1b returned 0 after 58 usecs
calling apple_init+0x0/0x38 @ 1
initcall apple_init+0x0/0x38 returned 0 after 62 usecs
calling belkin_init+0x0/0x1b @ 1
initcall belkin_init+0x0/0x1b returned 0 after 58 usecs
calling ch_init+0x0/0x1b @ 1
initcall ch_init+0x0/0x1b returned 0 after 59 usecs
calling ch_init+0x0/0x1b @ 1
initcall ch_init+0x0/0x1b returned 0 after 56 usecs
calling cp_init+0x0/0x1b @ 1
initcall cp_init+0x0/0x1b returned 0 after 58 usecs
calling dr_init+0x0/0x1b @ 1
initcall dr_init+0x0/0x1b returned 0 after 59 usecs
calling ez_init+0x0/0x1b @ 1
initcall ez_init+0x0/0x1b returned 0 after 60 usecs
calling gyration_init+0x0/0x1b @ 1
initcall gyration_init+0x0/0x1b returned 0 after 58 usecs
calling ks_init+0x0/0x1b @ 1
initcall ks_init+0x0/0x1b returned 0 after 58 usecs
calling kye_init+0x0/0x1b @ 1
initcall kye_init+0x0/0x1b returned 0 after 57 usecs
calling lg_init+0x0/0x1b @ 1
initcall lg_init+0x0/0x1b returned 0 after 56 usecs
calling ms_init+0x0/0x1b @ 1
initcall ms_init+0x0/0x1b returned 0 after 57 usecs
calling mr_init+0x0/0x1b @ 1
initcall mr_init+0x0/0x1b returned 0 after 60 usecs
calling ntrig_init+0x0/0x1b @ 1
initcall ntrig_init+0x0/0x1b returned 0 after 59 usecs
calling ortek_init+0x0/0x1b @ 1
initcall ortek_init+0x0/0x1b returned 0 after 57 usecs
calling pl_init+0x0/0x1b @ 1
initcall pl_init+0x0/0x1b returned 0 after 57 usecs
calling pl_init+0x0/0x1b @ 1
initcall pl_init+0x0/0x1b returned 0 after 58 usecs
calling samsung_init+0x0/0x1b @ 1
initcall samsung_init+0x0/0x1b returned 0 after 61 usecs
calling sjoy_init+0x0/0x1b @ 1
initcall sjoy_init+0x0/0x1b returned 0 after 59 usecs
calling sony_init+0x0/0x1b @ 1
initcall sony_init+0x0/0x1b returned 0 after 58 usecs
calling sp_init+0x0/0x1b @ 1
initcall sp_init+0x0/0x1b returned 0 after 57 usecs
calling ga_init+0x0/0x1b @ 1
initcall ga_init+0x0/0x1b returned 0 after 57 usecs
calling tm_init+0x0/0x1b @ 1
initcall tm_init+0x0/0x1b returned 0 after 61 usecs
calling ts_init+0x0/0x1b @ 1
initcall ts_init+0x0/0x1b returned 0 after 58 usecs
calling twinhan_init+0x0/0x1b @ 1
initcall twinhan_init+0x0/0x1b returned 0 after 58 usecs
calling zp_init+0x0/0x1b @ 1
initcall zp_init+0x0/0x1b returned 0 after 59 usecs
calling hid_init+0x0/0xc7 @ 1
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
initcall hid_init+0x0/0xc7 returned 0 after 52017 usecs
calling flow_cache_init+0x0/0x187 @ 1
initcall flow_cache_init+0x0/0x187 returned 0 after 26 usecs
calling llc_init+0x0/0x20 @ 1
initcall llc_init+0x0/0x20 returned 0 after 1 usecs
calling snap_init+0x0/0x38 @ 1
initcall snap_init+0x0/0x38 returned 0 after 3 usecs
calling rif_init+0x0/0x84 @ 1
initcall rif_init+0x0/0x84 returned 0 after 12 usecs
calling blackhole_module_init+0x0/0x12 @ 1
initcall blackhole_module_init+0x0/0x12 returned 0 after 1 usecs
calling nf_conntrack_standalone_init+0x0/0x12 @ 1
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
initcall nf_conntrack_standalone_init+0x0/0x12 returned 0 after 91693 usecs
calling xt_init+0x0/0x129 @ 1
initcall xt_init+0x0/0x129 returned 0 after 2 usecs
calling tcpudp_mt_init+0x0/0x17 @ 1
initcall tcpudp_mt_init+0x0/0x17 returned 0 after 1 usecs
calling conntrack_mt_init+0x0/0x17 @ 1
initcall conntrack_mt_init+0x0/0x17 returned 0 after 0 usecs
calling state_mt_init+0x0/0x17 @ 1
initcall state_mt_init+0x0/0x17 returned 0 after 1 usecs
calling sysctl_ipv4_init+0x0/0x4e @ 1
initcall sysctl_ipv4_init+0x0/0x4e returned 0 after 7 usecs
calling init_syncookies+0x0/0x19 @ 1
initcall init_syncookies+0x0/0x19 returned 0 after 24 usecs
calling ipv4_netfilter_init+0x0/0x12 @ 1
initcall ipv4_netfilter_init+0x0/0x12 returned 0 after 1 usecs
calling nf_conntrack_l3proto_ipv4_init+0x0/0x12d @ 1
initcall nf_conntrack_l3proto_ipv4_init+0x0/0x12d returned 0 after 10 usecs
calling nf_defrag_init+0x0/0x17 @ 1
initcall nf_defrag_init+0x0/0x17 returned 0 after 0 usecs
calling ip_tables_init+0x0/0xaf @ 1
ip_tables: (C) 2000-2006 Netfilter Core Team
initcall ip_tables_init+0x0/0xaf returned 0 after 22477 usecs
calling iptable_filter_init+0x0/0x6f @ 1
initcall iptable_filter_init+0x0/0x6f returned 0 after 29 usecs
calling reject_tg_init+0x0/0x12 @ 1
initcall reject_tg_init+0x0/0x12 returned 0 after 9 usecs
calling cubictcp_register+0x0/0x6e @ 1
TCP cubic registered
initcall cubictcp_register+0x0/0x6e returned 0 after 8944 usecs
calling xfrm_user_init+0x0/0x4d @ 1
Initializing XFRM netlink socket
initcall xfrm_user_init+0x0/0x4d returned 0 after 15758 usecs
calling packet_init+0x0/0x47 @ 1
NET: Registered protocol family 17
initcall packet_init+0x0/0x47 returned 0 after 16741 usecs
calling mcheck_debugfs_init+0x0/0x3b @ 1
initcall mcheck_debugfs_init+0x0/0x3b returned 0 after 15 usecs
calling severities_debugfs_init+0x0/0x3b @ 1
initcall severities_debugfs_init+0x0/0x3b returned 0 after 2 usecs
calling hpet_insert_resource+0x0/0x23 @ 1
initcall hpet_insert_resource+0x0/0x23 returned 0 after 1 usecs
calling update_mp_table+0x0/0x470 @ 1
initcall update_mp_table+0x0/0x470 returned 0 after 0 usecs
calling lapic_insert_resource+0x0/0x40 @ 1
initcall lapic_insert_resource+0x0/0x40 returned 0 after 1 usecs
calling init_lapic_nmi_sysfs+0x0/0x39 @ 1
initcall init_lapic_nmi_sysfs+0x0/0x39 returned 0 after 113 usecs
calling io_apic_bug_finalize+0x0/0x1b @ 1
initcall io_apic_bug_finalize+0x0/0x1b returned 0 after 0 usecs
calling check_early_ioremap_leak+0x0/0x65 @ 1
initcall check_early_ioremap_leak+0x0/0x65 returned 0 after 0 usecs
calling pat_memtype_list_init+0x0/0x32 @ 1
initcall pat_memtype_list_init+0x0/0x32 returned 0 after 3 usecs
calling sched_init_debug+0x0/0x24 @ 1
initcall sched_init_debug+0x0/0x24 returned 0 after 2 usecs
calling init_oops_id+0x0/0x31 @ 1
initcall init_oops_id+0x0/0x31 returned 0 after 2 usecs
calling disable_boot_consoles+0x0/0x45 @ 1
initcall disable_boot_consoles+0x0/0x45 returned 0 after 0 usecs
calling pm_qos_power_init+0x0/0x61 @ 1
initcall pm_qos_power_init+0x0/0x61 returned 0 after 194 usecs
calling software_resume+0x0/0x1ec @ 1
PM: Resume from disk failed.
initcall software_resume+0x0/0x1ec returned -2 after 14667 usecs
initcall software_resume+0x0/0x1ec returned with error code -2
calling debugfs_kprobe_init+0x0/0x89 @ 1
initcall debugfs_kprobe_init+0x0/0x89 returned 0 after 26 usecs
calling taskstats_init+0x0/0x95 @ 1
registered taskstats version 1
initcall taskstats_init+0x0/0x95 returned 0 after 15620 usecs
calling clear_boot_tracer+0x0/0x2d @ 1
initcall clear_boot_tracer+0x0/0x2d returned 0 after 0 usecs
calling max_swapfiles_check+0x0/0x8 @ 1
initcall max_swapfiles_check+0x0/0x8 returned 0 after 0 usecs
calling random32_reseed+0x0/0x92 @ 1
initcall random32_reseed+0x0/0x92 returned 0 after 15 usecs
calling pci_resource_alignment_sysfs_init+0x0/0x19 @ 1
initcall pci_resource_alignment_sysfs_init+0x0/0x19 returned 0 after 2 usecs
calling pci_sysfs_init+0x0/0x4c @ 1
initcall pci_sysfs_init+0x0/0x4c returned 0 after 350 usecs
calling boot_wait_for_devices+0x0/0x19 @ 1
initcall boot_wait_for_devices+0x0/0x19 returned 0 after 0 usecs
calling seqgen_init+0x0/0xf @ 1
initcall seqgen_init+0x0/0xf returned 0 after 9 usecs
calling late_resume_init+0x0/0xf4 @ 1
Magic number: 2:234:232
initcall late_resume_init+0x0/0xf4 returned 0 after 13750 usecs
calling scsi_complete_async_scans+0x0/0xf7 @ 1
initcall scsi_complete_async_scans+0x0/0xf7 returned 0 after 0 usecs
calling memmap_init+0x0/0x3b @ 1
initcall memmap_init+0x0/0x3b returned 0 after 32 usecs
calling pci_mmcfg_late_insert_resources+0x0/0x66 @ 1
initcall pci_mmcfg_late_insert_resources+0x0/0x66 returned 0 after 1 usecs
calling tcp_congestion_default+0x0/0x12 @ 1
initcall tcp_congestion_default+0x0/0x12 returned 0 after 1 usecs
calling initialize_hashrnd+0x0/0x19 @ 1
initcall initialize_hashrnd+0x0/0x19 returned 0 after 3 usecs
async_waiting @ 1
async_continuing @ 1 after 0 usec
Freeing unused kernel memory: 1292k freed
Write protecting the kernel read-only data: 8192k
Freeing unused kernel memory: 232k freed
Freeing unused kernel memory: 1920k freed
calling ehci_hcd_init+0x0/0x76 [ehci_hcd] @ 743
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ACPI: PCI Interrupt Link [LNU2] enabled at IRQ 23
ehci_hcd 0000:00:02.1: PCI INT B -> Link[LNU2] -> GSI 23 (level, high) -> IRQ 23
ehci_hcd 0000:00:02.1: setting latency timer to 64
ehci_hcd 0000:00:02.1: EHCI Host Controller
ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:02.1: debug port 1
ehci_hcd 0000:00:02.1: cache line size of 64 is not supported
ehci_hcd 0000:00:02.1: irq 23, io mem 0xf7dd0000
ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.34-rc1 ehci_hcd
usb usb1: SerialNumber: 0000:00:02.1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 10 ports detected
initcall ehci_hcd_init+0x0/0x76 [ehci_hcd] returned 0 after 386787 usecs
calling ohci_hcd_mod_init+0x0/0x59 [ohci_hcd] @ 745
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ACPI: PCI Interrupt Link [LNU0] enabled at IRQ 22
ohci_hcd 0000:00:02.0: PCI INT A -> Link[LNU0] -> GSI 22 (level, high) -> IRQ 22
ohci_hcd 0000:00:02.0: setting latency timer to 64
ohci_hcd 0000:00:02.0: OHCI Host Controller
ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:02.0: irq 22, io mem 0xf7de0000
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: OHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.34-rc1 ohci_hcd
usb usb2: SerialNumber: 0000:00:02.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 10 ports detected
initcall ohci_hcd_mod_init+0x0/0x59 [ohci_hcd] returned 0 after 398511 usecs
calling uhci_hcd_init+0x0/0xc6 [uhci_hcd] @ 747
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:01:04.4: PCI INT B -> Link[LNKX] -> GSI 17 (level, high) -> IRQ 17
uhci_hcd 0000:01:04.4: UHCI Host Controller
uhci_hcd 0000:01:04.4: new USB bus registered, assigned bus number 3
uhci_hcd 0000:01:04.4: port count misdetected? forcing to 2 ports
uhci_hcd 0000:01:04.4: HCRESET not completed yet!
uhci_hcd 0000:01:04.4: irq 17, io base 0x00001800
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.34-rc1 uhci_hcd
usb usb3: SerialNumber: 0000:01:04.4
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
initcall uhci_hcd_init+0x0/0xc6 [uhci_hcd] returned 0 after 329181 usecs
calling cciss_init+0x0/0xa4 [cciss] @ 749
HP CISS Driver (v 3.6.20)
cciss: using PCI PM to reset controller
usb 3-1: new full speed USB device using uhci_hcd and address 2
usb 3-1: New USB device found, idVendor=03f0, idProduct=1027
usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-1: Product: Virtual Keyboard
usb 3-1: Manufacturer: HP
input: HP Virtual Keyboard as /class/input/input1
generic-usb 0003:03F0:1027.0001: input,hidraw0: USB HID v1.01 Keyboard [HP Virtual Keyboard] on usb-0000:01:04.4-1/input0
input: HP Virtual Keyboard as /class/input/input2
generic-usb 0003:03F0:1027.0002: input,hidraw1: USB HID v1.01 Mouse [HP Virtual Keyboard] on usb-0000:01:04.4-1/input1
usb 3-2: new full speed USB device using uhci_hcd and address 3
usb 3-2: New USB device found, idVendor=03f0, idProduct=1327
usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-2: Product: Virtual Hub
usb 3-2: Manufacturer: HP
hub 3-2:1.0: USB hub found
hub 3-2:1.0: 7 ports detected
cciss: controller message 03:00 succeeded
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 54
cciss 0000:42:08.0: PCI INT A -> Link[LNKA] -> GSI 54 (level, high) -> IRQ 54
cciss 0000:42:08.0: irq 70 for MSI/MSI-X
IRQ 70/cciss0: IRQF_DISABLED is not guaranteed on shared IRQs
cciss0: <0x3238> at PCI 0000:42:08.0 IRQ 70 using DAC
cciss/c0d0: p1 p2 p3 p4 < p5 p6 p7 >
cciss/c0d1: p1 p2
initcall cciss_init+0x0/0xa4 [cciss] returned 0 after 2181928 usecs
calling shpcd_init+0x0/0x68 [shpchp] @ 752
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
initcall shpcd_init+0x0/0x68 [shpchp] returned 0 after 35425 usecs
calling scsi_tgt_init+0x0/0x82 [scsi_tgt] @ 758
initcall scsi_tgt_init+0x0/0x82 [scsi_tgt] returned 0 after 211 usecs
calling fc_transport_init+0x0/0x85 [scsi_transport_fc] @ 763
initcall fc_transport_init+0x0/0x85 [scsi_transport_fc] returned 0 after 29 usecs
calling lpfc_init+0x0/0xd3 [lpfc] @ 764
Emulex LightPulse Fibre Channel SCSI driver 8.3.9
Copyright(c) 2004-2009 Emulex. All rights reserved.
ACPI: PCI Interrupt Link [LNKY] enabled at IRQ 18
lpfc 0000:08:00.0: PCI INT A -> Link[LNKY] -> GSI 18 (level, high) -> IRQ 18
lpfc 0000:08:00.0: setting latency timer to 64
scsi0 : on PCI bus 08 device 00 irq 18
lpfc 0000:08:00.0: irq 71 for MSI/MSI-X
ACPI: PCI Interrupt Link [LNKZ] enabled at IRQ 19
lpfc 0000:08:00.1: PCI INT B -> Link[LNKZ] -> GSI 19 (level, high) -> IRQ 19
lpfc 0000:08:00.1: setting latency timer to 64
scsi1 : on PCI bus 08 device 01 irq 19
lpfc 0000:08:00.0: 0:1303 Link Up Event x1 received Data: x1 xf7 x10 x2 x0 x0 0
lpfc 0000:08:00.1: irq 72 for MSI/MSI-X
scsi 0:0:0:0: RAID COMPAQ MSA1000 5.20 PQ: 0 ANSI: 4
scsi 0:0:0:0: Attached scsi generic sg0 type 12
scsi 0:0:1:0: RAID COMPAQ MSA1000 5.20 PQ: 0 ANSI: 4
scsi 0:0:1:0: Attached scsi generic sg1 type 12
scsi 0:0:1:8: Direct-Access COMPAQ MSA1000 VOLUME 5.20 PQ: 0 ANSI: 4
sd 0:0:1:8: Attached scsi generic sg2 type 0
scsi 0:0:2:0: Enclosure HP MSA2212fc J200 PQ: 0 ANSI: 5
scsi 0:0:2:0: Attached scsi generic sg3 type 13
sd 0:0:1:8: [sda] 2187605616 512-byte logical blocks: (1.12 TB/1.01 TiB)
sd 0:0:1:8: [sda] Write Protect is off
sd 0:0:1:8: [sda] Mode Sense: 83 00 00 08
sd 0:0:1:8: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1
sd 0:0:1:8: [sda] Attached SCSI disk
initcall lpfc_init+0x0/0xd3 [lpfc] returned 0 after 4315172 usecs
calling usb_stor_init+0x0/0x4b [usb_storage] @ 802
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
initcall usb_stor_init+0x0/0x4b [usb_storage] returned 0 after 53681 usecs
lpfc 0000:08:00.1: 1:1303 Link Up Event x1 received Data: x1 xf7 x10 x2 x0 x0 0
scsi 1:0:0:0: RAID COMPAQ MSA1000 5.20 PQ: 0 ANSI: 4
scsi 1:0:0:0: Attached scsi generic sg4 type 12
scsi 1:0:1:0: RAID COMPAQ MSA1000 5.20 PQ: 0 ANSI: 4
scsi 1:0:1:0: Attached scsi generic sg5 type 12
scsi 1:0:1:8: Direct-Access COMPAQ MSA1000 VOLUME 5.20 PQ: 0 ANSI: 4
sd 1:0:1:8: Attached scsi generic sg6 type 0
sd 1:0:1:8: [sdb] 2187605616 512-byte logical blocks: (1.12 TB/1.01 TiB)
sd 1:0:1:8: [sdb] Write Protect is off
sd 1:0:1:8: [sdb] Mode Sense: 83 00 00 08
sd 1:0:1:8: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdb: sdb1
scsi 1:0:2:0: Enclosure HP MSA2212fc J200 PQ: 0 ANSI: 5
scsi 1:0:2:0: Attached scsi generic sg7 type 13
sd 1:0:1:8: [sdb] Attached SCSI disk
calling dm_dirty_log_init+0x0/0x59 [dm_log] @ 804
initcall dm_dirty_log_init+0x0/0x59 [dm_log] returned 0 after 1 usecs
EXT3-fs (cciss/c0d0p3): recovery required on readonly filesystem
EXT3-fs (cciss/c0d0p3): write access will be enabled during recovery
kjournald starting. Commit interval 5 seconds
EXT3-fs (cciss/c0d0p3): recovery complete
EXT3-fs (cciss/c0d0p3): mounted filesystem with writeback data mode
calling pcspkr_init+0x0/0x12 [pcspkr] @ 1078
calling hwmon_init+0x0/0x112 [hwmon] @ 1115
input: PC Speaker as /class/input/input3
initcall hwmon_init+0x0/0x112 [hwmon] returned 0 after 40682 usecs
calling k8temp_init+0x0/0x20 [k8temp] @ 1115
k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
k8temp 0000:00:19.3: Temperature readouts might be wrong - check erratum #141
initcall k8temp_init+0x0/0x20 [k8temp] returned 0 after 15343 usecs
calling serio_raw_init+0x0/0x20 [serio_raw] @ 1321
initcall serio_raw_init+0x0/0x20 [serio_raw] returned 0 after 21 usecs
calling floppy_module_init+0x0/0xd6d [floppy] @ 1330
calling init_tis+0x0/0x92 [tpm_tis] @ 1152
Floppy drive(s): fd0 is 1.44M
calling ipmi_init_msghandler_mod+0x0/0xd [ipmi_msghandler] @ 1449
initcall pcspkr_init+0x0/0x12 [pcspkr] returned 0 after 371629 usecs
calling snd_mem_init+0x0/0x2c [snd_page_alloc] @ 1078
initcall init_tis+0x0/0x92 [tpm_tis] returned 0 after 163507 usecs
initcall snd_mem_init+0x0/0x2c [snd_page_alloc] returned 0 after 56654 usecs
ipmi message handler version 39.2
initcall ipmi_init_msghandler_mod+0x0/0xd [ipmi_msghandler] returned 0 after 178608 usecs
calling init_soundcore+0x0/0x8b [soundcore] @ 1078
initcall init_soundcore+0x0/0x8b [soundcore] returned 0 after 16 usecs
calling alsa_sound_init+0x0/0x8f [snd] @ 1078
initcall alsa_sound_init+0x0/0x8f [snd] returned 0 after 31 usecs
calling alsa_timer_init+0x0/0x187 [snd_timer] @ 1078
initcall alsa_timer_init+0x0/0x187 [snd_timer] returned 0 after 55 usecs
calling alsa_pcm_init+0x0/0x71 [snd_pcm] @ 1894
initcall alsa_pcm_init+0x0/0x71 [snd_pcm] returned 0 after 7 usecs
calling alsa_mixer_oss_init+0x0/0x3a [snd_mixer_oss] @ 1918
initcall alsa_mixer_oss_init+0x0/0x3a [snd_mixer_oss] returned 0 after 0 usecs
calling alsa_pcm_oss_init+0x0/0xa1 [snd_pcm_oss] @ 1918
initcall alsa_pcm_oss_init+0x0/0xa1 [snd_pcm_oss] returned 0 after 1 usecs
calling alsa_seq_device_init+0x0/0x60 [snd_seq_device] @ 1967
initcall alsa_seq_device_init+0x0/0x60 [snd_seq_device] returned 0 after 5 usecs
calling enclosure_init+0x0/0x19 [enclosure] @ 1966
initcall enclosure_init+0x0/0x19 [enclosure] returned 0 after 14 usecs
calling ses_init+0x0/0x40 [ses] @ 1966
ses 0:0:2:0: Attached Enclosure device
ses 1:0:2:0: Attached Enclosure device
initcall ses_init+0x0/0x40 [ses] returned 0 after 60 usecs
calling alsa_seq_init+0x0/0x57 [snd_seq] @ 1994
initcall alsa_seq_init+0x0/0x57 [snd_seq] returned 0 after 70 usecs
calling alsa_seq_midi_event_init+0x0/0x8 [snd_seq_midi_event] @ 1994
initcall alsa_seq_midi_event_init+0x0/0x8 [snd_seq_midi_event] returned 0 after 0 usecs
calling alsa_seq_oss_init+0x0/0x19e [snd_seq_oss] @ 1994
calling phy_init+0x0/0x31 [libphy] @ 1985
initcall phy_init+0x0/0x31 [libphy] returned 0 after 909 usecs
calling tg3_init+0x0/0x20 [tg3] @ 1986
tg3.c:v3.108 (February 17, 2010)
tg3 0000:07:04.0: PCI INT A -> Link[LNKZ] -> GSI 19 (level, high) -> IRQ 19
calling alsa_seq_dummy_init+0x0/0xcd [snd_seq_dummy] @ 2058
initcall alsa_seq_dummy_init+0x0/0xcd [snd_seq_dummy] returned 0 after 10 usecs
initcall alsa_seq_oss_init+0x0/0x19e [snd_seq_oss] returned 0 after 279453 usecs
calling pcsp_init+0x0/0x20 [snd_pcsp] @ 1078
Error: Driver 'pcspkr' is already registered, aborting...
initcall pcsp_init+0x0/0x20 [snd_pcsp] returned -16 after 3 usecs
initcall pcsp_init+0x0/0x20 [snd_pcsp] returned with error code -16
initcall ipmi_init_msghandler_mod+0x0/0xd [ipmi_msghandler] returned with error code -16
tg3 0000:07:04.0: eth2: Tigon3 [partno(011276-001) rev 9003] (PCIX:133MHz:64-bit) MAC address 00:18:fe:34:1c:2f
tg3 0000:07:04.0: eth2: attached PHY is 5714 (1000Base-SX Ethernet) (WireSpeed[0])
BUG: unable to handle kernel NULL pointer dereference at (null)
IP: [<(null)>] (null)
PGD 0
Oops: 0010 [#1] SMP
last sysfs file: /sys/block/sdb/removable
CPU 3
Modules linked in: snd_seq_dummy tg3(+) libphy snd_seq_oss snd_seq_midi_event snd_seq ses enclosure snd_seq_device snd_pcm_oss snd_mixer_oss snd_pcm snd_timer snd soundcore snd_page_alloc tpm_tis floppy(+) serio_raw tpm k8temp tpm_bios hwmon pcspkr dm_region_hash dm_log usb_storage lpfc scsi_transport_fc scsi_tgt shpchp cciss uhci_hcd ohci_hcd ehci_hcd
Pid: 2570, comm: udevd Not tainted 2.6.34-rc1 #1 /ProLiant BL685c G1
RIP: 0010:[<0000000000000000>] [<(null)>] (null)
RSP: 0000:ffff880183b03e98 EFLAGS: 00010246
RAX: ffff88027d94bfd8 RBX: 00000000000000ea RCX: ffff88027d025d40
RDX: ffff880183b03eb0 RSI: dead000000200200 RDI: 0000000000000000
RBP: ffff880183b03ef0 R08: ffff88027d025d40 R09: 0000000000000632
R10: 0000000000000000 R11: 00000000ffffffff R12: ffffffffa0136900
R13: ffff88027f658000 R14: 0000000000000000 R15: 0000000000000100
FS: 00007fe01e9af710(0000) GS:ffff880183b00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
CR2: 0000000000000000 CR3: 000000027ea32000 CR4: 00000000000006e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Process udevd (pid: 2570, threadinfo ffff88027d94a000, task ffff88027d025d40)
Stack:
ffffffff81054e89 0000000000000052 0000000000000000 ffff880183b03eb0
<0> ffff880183b03eb0 ffffffff8101ea60 0000000000000282 0000000000000001
<0> 0000000000000141 0000000000000100 ffffffff81823088 ffff880183b03f40
Call Trace:
<IRQ>
[<ffffffff81054e89>] ? run_timer_softirq+0x16d/0x209
[<ffffffff8101ea60>] ? apic_write+0x11/0x13
[<ffffffff8104deb5>] __do_softirq+0xe1/0x1b7
[<ffffffff81009a5c>] call_softirq+0x1c/0x30
[<ffffffff8100b2b7>] do_softirq+0x46/0x9f
[<ffffffff8104dfd0>] irq_exit+0x45/0x84
[<ffffffff8101f442>] smp_apic_timer_interrupt+0x79/0x87
[<ffffffff81009513>] apic_timer_interrupt+0x13/0x20
<EOI>
Code: Bad RIP value.
RIP [<(null)>] (null)
RSP <ffff880183b03e98>
CR2: 0000000000000000
---[ end trace 77b6d5c602bfc703 ]---
Kernel panic - not syncing: Fatal exception in interrupt
Pid: 2570, comm: udevd Tainted: G D 2.6.34-rc1 #1
Call Trace:
<IRQ> [<ffffffff8104815c>] panic+0x9e/0x123
[<ffffffff81048427>] ? spin_unlock_irqrestore+0x9/0xb
[<ffffffff81049880>] ? kmsg_dump+0x14e/0x176
[<ffffffff813ba72f>] oops_end+0xb1/0xc1
[<ffffffff8102c436>] no_context+0x1f5/0x204
[<ffffffff8102c692>] __bad_area_nosemaphore+0x193/0x1b6
[<ffffffff81319885>] ? consume_skb+0x28/0x2a
[<ffffffff8102c72b>] bad_area_nosemaphore+0xe/0x10
[<ffffffff813bc713>] do_page_fault+0x14c/0x281
[<ffffffff813b9b25>] page_fault+0x25/0x30
[<ffffffff81054e89>] ? run_timer_softirq+0x16d/0x209
[<ffffffff8101ea60>] ? apic_write+0x11/0x13
[<ffffffff8104deb5>] __do_softirq+0xe1/0x1b7
[<ffffffff81009a5c>] call_softirq+0x1c/0x30
[<ffffffff8100b2b7>] do_softirq+0x46/0x9f
[<ffffffff8104dfd0>] irq_exit+0x45/0x84
[<ffffffff8101f442>] smp_apic_timer_interrupt+0x79/0x87
[<ffffffff81009513>] apic_timer_interrupt+0x13/0x20
<EOI>
BUG: unable to handle kernel NULL pointer dereference at (null)
IP: [<(null)>] (null)
PGD 0
Oops: 0010 [#2] SMP
last sysfs file: /sys/block/sdb/removable
CPU 3
Modules linked in: snd_seq_dummy tg3(+) libphy snd_seq_oss snd_seq_midi_event snd_seq ses enclosure snd_seq_device snd_pcm_oss snd_mixer_oss snd_pcm snd_timer snd soundcore snd_page_alloc tpm_tis floppy(+) serio_raw tpm k8temp tpm_bios hwmon pcspkr dm_region_hash dm_log usb_storage lpfc scsi_transport_fc scsi_tgt shpchp cciss uhci_hcd ohci_hcd ehci_hcd
Pid: 2570, comm: udevd Tainted: G D 2.6.34-rc1 #1 /ProLiant BL685c G1
RIP: 0010:[<0000000000000000>] [<(null)>] (null)
RSP: 0000:ffff880183b03b60 EFLAGS: 00010286
RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffffffffa01365e0
RDX: ffffffff81a88680 RSI: 0000000000000000 RDI: ffffffffa01365e0
RBP: ffff880183b03b98 R08: 0000000000000000 R09: 0000000000000000
R10: ffff880183b03928 R11: 0000000000000002 R12: 00000000ffffffff
R13: 0000000000000000 R14: ffffffff81a88680 R15: 0000000000000000
FS: 00007fe01e9af710(0000) GS:ffff880183b00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
CR2: 0000000000000000 CR3: 000000027ea32000 CR4: 00000000000006e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Process udevd (pid: 2570, threadinfo ffff88027d94a000, task ffff88027d025d40)
Stack:
ffffffff813bc87b ffff880183b03b88 ffffffff815825f6 0000000000000246
<0> 0000000000000009 ffff88027d025d40 0000000000000010 ffff880183b03ba8
<0> ffffffff813bc8b0 ffff880183b03bb8 ffffffff813bc8c1 ffff880183b03ca8
Call Trace:
<IRQ>
[<ffffffff813bc87b>] ? notifier_call_chain+0x33/0x5b
[<ffffffff813bc8b0>] __atomic_notifier_call_chain+0xd/0xf
[<ffffffff813bc8c1>] atomic_notifier_call_chain+0xf/0x11
[<ffffffff81048188>] panic+0xca/0x123
[<ffffffff81048427>] ? spin_unlock_irqrestore+0x9/0xb
[<ffffffff81049880>] ? kmsg_dump+0x14e/0x176
[<ffffffff813ba72f>] oops_end+0xb1/0xc1
[<ffffffff8102c436>] no_context+0x1f5/0x204
[<ffffffff8102c692>] __bad_area_nosemaphore+0x193/0x1b6
[<ffffffff81319885>] ? consume_skb+0x28/0x2a
[<ffffffff8102c72b>] bad_area_nosemaphore+0xe/0x10
[<ffffffff813bc713>] do_page_fault+0x14c/0x281
[<ffffffff813b9b25>] page_fault+0x25/0x30
[<ffffffff81054e89>] ? run_timer_softirq+0x16d/0x209
[<ffffffff8101ea60>] ? apic_write+0x11/0x13
[<ffffffff8104deb5>] __do_softirq+0xe1/0x1b7
[<ffffffff81009a5c>] call_softirq+0x1c/0x30
[<ffffffff8100b2b7>] do_softirq+0x46/0x9f
[<ffffffff8104dfd0>] irq_exit+0x45/0x84
[<ffffffff8101f442>] smp_apic_timer_interrupt+0x79/0x87
[<ffffffff81009513>] apic_timer_interrupt+0x13/0x20
<EOI>
Code: Bad RIP value.
RIP [<(null)>] (null)
RSP <ffff880183b03b60>
CR2: 0000000000000000
---[ end trace 77b6d5c602bfc704 ]---
Kernel panic - not syncing: Fatal exception in interrupt
Pid: 2570, comm: udevd Tainted: G D 2.6.34-rc1 #1
Call Trace:
<IRQ> [<ffffffff8104815c>] panic+0x9e/0x123
[<ffffffff81048427>] ? spin_unlock_irqrestore+0x9/0xb
[<ffffffff81049880>] ? kmsg_dump+0x14e/0x176
[<ffffffff813ba72f>] oops_end+0xb1/0xc1
[<ffffffff8102c436>] no_context+0x1f5/0x204
[<ffffffff8102c692>] __bad_area_nosemaphore+0x193/0x1b6
[<ffffffff8106cc75>] ? tick_program_event+0x25/0x27
[<ffffffff8102c72b>] bad_area_nosemaphore+0xe/0x10
[<ffffffff813bc713>] do_page_fault+0x14c/0x281
[<ffffffff813b9b25>] page_fault+0x25/0x30
[<ffffffff813bc87b>] ? notifier_call_chain+0x33/0x5b
[<ffffffff813bc8b0>] __atomic_notifier_call_chain+0xd/0xf
[<ffffffff813bc8c1>] atomic_notifier_call_chain+0xf/0x11
[<ffffffff81048188>] panic+0xca/0x123
[<ffffffff81048427>] ? spin_unlock_irqrestore+0x9/0xb
[<ffffffff81049880>] ? kmsg_dump+0x14e/0x176
[<ffffffff813ba72f>] oops_end+0xb1/0xc1
[<ffffffff8102c436>] no_context+0x1f5/0x204
[<ffffffff8102c692>] __bad_area_nosemaphore+0x193/0x1b6
[<ffffffff81319885>] ? consume_skb+0x28/0x2a
[<ffffffff8102c72b>] bad_area_nosemaphore+0xe/0x10
[<ffffffff813bc713>] do_page_fault+0x14c/0x281
[<ffffffff813b9b25>] page_fault+0x25/0x30
[<ffffffff81054e89>] ? run_timer_softirq+0x16d/0x209
[<ffffffff8101ea60>] ? apic_write+0x11/0x13
[<ffffffff8104deb5>] __do_softirq+0xe1/0x1b7
[<ffffffff81009a5c>] call_softirq+0x1c/0x30
[<ffffffff8100b2b7>] do_softirq+0x46/0x9f
[<ffffffff8104dfd0>] irq_exit+0x45/0x84
[<ffffffff8101f442>] smp_apic_timer_interrupt+0x79/0x87
[<ffffffff81009513>] apic_timer_interrupt+0x13/0x20
<EOI>
BUG: unable to handle kernel NULL pointer dereference at (null)
IP: [<(null)>] (null)
PGD 0
Oops: 0010 [#3] SMP
last sysfs file: /sys/block/sdb/removable
CPU 3
Modules linked in: snd_seq_dummy tg3(+) libphy snd_seq_oss snd_seq_midi_event snd_seq ses enclosure snd_seq_device snd_pcm_oss snd_mixer_oss snd_pcm snd_timer snd soundcore snd_page_alloc tpm_tis floppy(+) serio_raw tpm k8temp tpm_bios hwmon pcspkr dm_region_hash dm_log usb_storage lpfc scsi_transport_fc scsi_tgt shpchp cciss uhci_hcd ohci_hcd ehci_hcd
Pid: 2570, comm: udevd Tainted: G D 2.6.34-rc1 #1 /ProLiant BL685c G1
RIP: 0010:[<0000000000000000>] [<(null)>] (null)
RSP: 0000:ffff880183b03830 EFLAGS: 00010286
RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffffffffa01365e0
RDX: ffffffff81a88680 RSI: 0000000000000000 RDI: ffffffffa01365e0
RBP: ffff880183b03868 R08: 0000000000000000 R09: 0000000000000000
R10: ffff880183b035f8 R11: 0000000000000002 R12: 00000000ffffffff
R13: 0000000000000000 R14: ffffffff81a88680 R15: 0000000000000000
FS: 00007fe01e9af710(0000) GS:ffff880183b00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
CR2: 0000000000000000 CR3: 000000027ea32000 CR4: 00000000000006e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Process udevd (pid: 2570, threadinfo ffff88027d94a000, task ffff88027d025d40)
Stack:
ffffffff813bc87b ffff880183b03858 ffffffff815825f6 0000000000000246
<0> 0000000000000009 ffff88027d025d40 0000000000000010 ffff880183b03878
<0> ffffffff813bc8b0 ffff880183b03888 ffffffff813bc8c1 ffff880183b03978
Call Trace:
<IRQ>
[<ffffffff813bc87b>] ? notifier_call_chain+0x33/0x5b
[<ffffffff813bc8b0>] __atomic_notifier_call_chain+0xd/0xf
[<ffffffff813bc8c1>] atomic_notifier_call_chain+0xf/0x11
[<ffffffff81048188>] panic+0xca/0x123
[<ffffffff81048427>] ? spin_unlock_irqrestore+0x9/0xb
[<ffffffff81049880>] ? kmsg_dump+0x14e/0x176
[<ffffffff813ba72f>] oops_end+0xb1/0xc1
[<ffffffff8102c436>] no_context+0x1f5/0x204
[<ffffffff8102c692>] __bad_area_nosemaphore+0x193/0x1b6
[<ffffffff8106cc75>] ? tick_program_event+0x25/0x27
[<ffffffff8102c72b>] bad_area_nosemaphore+0xe/0x10
[<ffffffff813bc713>] do_page_fault+0x14c/0x281
[<ffffffff813b9b25>] page_fault+0x25/0x30
[<ffffffff813bc87b>] ? notifier_call_chain+0x33/0x5b
[<ffffffff813bc8b0>] __atomic_notifier_call_chain+0xd/0xf
[<ffffffff813bc8c1>] atomic_notifier_call_chain+0xf/0x11
[<ffffffff81048188>] panic+0xca/0x123
[<ffffffff81048427>] ? spin_unlock_irqrestore+0x9/0xb
[<ffffffff81049880>] ? kmsg_dump+0x14e/0x176
[<ffffffff813ba72f>] oops_end+0xb1/0xc1
[<ffffffff8102c436>] no_context+0x1f5/0x204
[<ffffffff8102c692>] __bad_area_nosemaphore+0x193/0x1b6
[<ffffffff81319885>] ? consume_skb+0x28/0x2a
[<ffffffff8102c72b>] bad_area_nosemaphore+0xe/0x10
[<ffffffff813bc713>] do_page_fault+0x14c/0x281
[<ffffffff813b9b25>] page_fault+0x25/0x30
[<ffffffff81054e89>] ? run_timer_softirq+0x16d/0x209
[<ffffffff8101ea60>] ? apic_write+0x11/0x13
[<ffffffff8104deb5>] __do_softirq+0xe1/0x1b7
[<ffffffff81009a5c>] call_softirq+0x1c/0x30
[<ffffffff8100b2b7>] do_softirq+0x46/0x9f
[<ffffffff8104dfd0>] irq_exit+0x45/0x84
[<ffffffff8101f442>] smp_apic_timer_interrupt+0x79/0x87
[<ffffffff81009513>] apic_timer_interrupt+0x13/0x20
<EOI>
Code: Bad RIP value.
RIP [<(null)>] (null)
RSP <ffff880183b03830>
CR2: 0000000000000000
---[ end trace 77b6d5c602bfc705 ]---
Kernel panic - not syncing: Fatal exception in interrupt
Pid: 2570, comm: udevd Tainted: G D 2.6.34-rc1 #1
Call Trace:
<IRQ> [<ffffffff8104815c>] panic+0x9e/0x123
[<ffffffff81048427>] ? spin_unlock_irqrestore+0x9/0xb
[<ffffffff81049880>] ? kmsg_dump+0x14e/0x176
[<ffffffff813ba72f>] oops_end+0xb1/0xc1
[<ffffffff8102c436>] no_context+0x1f5/0x204
[<ffffffff8102c692>] __bad_area_nosemaphore+0x193/0x1b6
[<ffffffff8102c72b>] bad_area_nosemaphore+0xe/0x10
[<ffffffff813bc713>] do_page_fault+0x14c/0x281
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.34-rc1 (root@ca-ostest293.us.oracle.com) (gcc version 4.1.2 20080704 (Red Hat 4.1.2-46)) #1 SMP Mon Mar 8 14:01:59 PST 2010
Command line: root=LABEL=/ selinux=0 console=tty0 console=ttyS0,115200n8 reset_devices netconsole=56816@139.185.50.77/eth0,56816@139.185.50.76/00:18:FE:34:1C:3D nmi_watchdog=2 debug ignore_loglevel initcall_debug 3
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000007fe50000 (usable)
BIOS-e820: 000000007fe50000 - 000000007fe58000 (ACPI data)
BIOS-e820: 000000007fe58000 - 0000000080000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fed00000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved)
BIOS-e820: 00000000ffc00000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 000000027ffff000 (usable)
debug: ignoring loglevel setting.
NX (Execute Disable) protection: active
DMI 2.3 present.
e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
No AGP bridge found
last_pfn = 0x27ffff max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-FFFFF write-back
MTRR variable ranges enabled:
0 base 0000000000 mask FF80000000 write-back
1 disabled
2 disabled
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
TOM2: 0000000280000000 aka 10240M
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820 update range: 0000000080000000 - 0000000100000000 (usable) ==> (reserved)
last_pfn = 0x7fe50 max_arch_pfn = 0x400000000
initial memory mapped : 0 - 20000000
found SMP MP-table at [ffff8800000f4f80] f4f80
init_memory_mapping: 0000000000000000-000000007fe50000
0000000000 - 007fe00000 page 2M
007fe00000 - 007fe50000 page 4k
kernel direct mapping tables up to 7fe50000 @ 8000-c000
init_memory_mapping: 0000000100000000-000000027ffff000
0100000000 - 027fe00000 page 2M
027fe00000 - 027ffff000 page 4k
kernel direct mapping tables up to 27ffff000 @ a000-16000
RAMDISK: 37d77000 - 37feff29
ACPI: RSDP 00000000000f4f00 00024 (v02 HP )
ACPI: XSDT 000000007fe50780 0005C (v01 HP A08 00000002 Ò? 0000162E)
ACPI: FACP 000000007fe50800 000F4 (v03 HP A08 00000002 Ò? 0000162E)
ACPI: DSDT 000000007fe50900 03F75 (v01 HP DSDT 00000001 INTL 20030228)
ACPI: FACS 000000007fe50100 00040
ACPI: SPCR 000000007fe50140 00050 (v01 HP SPCRRBSU 00000001 Ò? 0000162E)
ACPI: MCFG 000000007fe501c0 0003C (v01 HP ProLiant 00000001 00000000)
ACPI: HPET 000000007fe50200 00038 (v01 HP A08 00000002 Ò? 0000162E)
ACPI: SPMI 000000007fe50240 00040 (v05 HP ProLiant 00000001 Ò? 0000162E)
ACPI: APIC 000000007fe50280 000DE (v01 HP 00000083 00000002 00000000)
ACPI: SRAT 000000007fe50380 00110 (v01 AMD HAMMER 00000001 AMD 00000001)
ACPI: Local APIC address 0xfee00000
SRAT: PXM 0 -> APIC 0x00 -> Node 0
SRAT: PXM 0 -> APIC 0x01 -> Node 0
SRAT: PXM 1 -> APIC 0x02 -> Node 1
SRAT: PXM 1 -> APIC 0x03 -> Node 1
SRAT: Node 0 PXM 0 0-a0000
SRAT: Node 0 PXM 0 100000-80000000
SRAT: Node 0 PXM 0 100000000-180000000
SRAT: Node 1 PXM 1 180000000-280000000
NUMA: Allocated memnodemap from 11000 - 16040
NUMA: Using 20 for the hash shift.
Initmem setup node 0 0000000000000000-0000000180000000
NODE_DATA [0000000100000000 - 0000000100013fff]
Initmem setup node 1 0000000180000000-000000027ffff000
NODE_DATA [0000000180000000 - 0000000180013fff]
[ffffea0000000000-ffffea00053fffff] PMD -> [ffff880100200000-ffff8801039fffff] on node 0
[ffffea0005400000-ffffea0008bfffff] PMD -> [ffff880180200000-ffff8801839fffff] on node 1
Zone PFN ranges:
DMA 0x00000001 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal 0x00100000 -> 0x0027ffff
Movable zone start PFN for each node
early_node_map[4] active PFN ranges
0: 0x00000001 -> 0x0000009f
0: 0x00000100 -> 0x0007fe50
0: 0x00100000 -> 0x00180000
1: 0x00180000 -> 0x0027ffff
On node 0 totalpages: 1048046
DMA zone: 56 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3942 pages, LIFO batch:0
DMA32 zone: 14280 pages used for memmap
DMA32 zone: 505480 pages, LIFO batch:31
Normal zone: 7168 pages used for memmap
Normal zone: 517120 pages, LIFO batch:31
On node 1 totalpages: 1048575
Normal zone: 14336 pages used for memmap
Normal zone: 1034239 pages, LIFO batch:31
Detected use of extended apic ids on hypertransport bus
Detected use of extended apic ids on hypertransport bus
ACPI: PM-Timer IO Port: 0x908
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
ACPI: IOAPIC (id[0x08] address[0xf7df0000] gsi_base[0])
IOAPIC[0]: apic_id 8, version 17, address 0xf7df0000, GSI 0-23
ACPI: IOAPIC (id[0x09] address[0xfdef0000] gsi_base[38])
IOAPIC[1]: apic_id 9, version 17, address 0xfdef0000, GSI 38-61
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x10228201 base: 0xfed00000
SMP: Allowing 4 CPUs, 0 hotplug CPUs
early_res array is doubled to 64 at [7000 - 77ff]
nr_irqs_gsi: 62
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
PM: Registered nosave memory: 000000007fe50000 - 000000007fe58000
PM: Registered nosave memory: 000000007fe58000 - 0000000080000000
PM: Registered nosave memory: 0000000080000000 - 00000000fec00000
PM: Registered nosave memory: 00000000fec00000 - 00000000fed00000
PM: Registered nosave memory: 00000000fed00000 - 00000000fee00000
PM: Registered nosave memory: 00000000fee00000 - 00000000fee10000
PM: Registered nosave memory: 00000000fee10000 - 00000000ffc00000
PM: Registered nosave memory: 00000000ffc00000 - 0000000100000000
Allocating PCI resources starting at 80000000 (gap: 80000000:7ec00000)
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:16 nr_cpumask_bits:16 nr_cpu_ids:4 nr_node_ids:2
PERCPU: Embedded 29 pages/cpu @ffff880001e00000 s90088 r8192 d20504 u1048576
pcpu-alloc: s90088 r8192 d20504 u1048576 alloc=1*2097152
pcpu-alloc: [0] 0 2 [1] 1 3
early_res array is doubled to 128 at [16040 - 1703f]
Built 2 zonelists in Zone order, mobility grouping on. Total pages: 2060781
Policy zone: Normal
Kernel command line: root=LABEL=/ selinux=0 console=tty0 console=ttyS0,115200n8 reset_devices netconsole=56816@139.185.50.77/eth0,56816@139.185.50.76/00:18:FE:34:1C:3D nmi_watchdog=2 debug ignore_loglevel initcall_debug 3
PID hash table entries: 4096 (order: 3, 32768 bytes)
Checking aperture...
No AGP bridge found
Node 0: aperture @ fa6c000000 size 32 MB
Aperture beyond 4GB. Ignoring.
Your BIOS doesn't leave a aperture memory hole
Please enable the IOMMU option in the BIOS setup
This costs you 64 MB of RAM
Mapping aperture over 65536 KB of RAM @ 20000000
PM: Registered nosave memory: 0000000020000000 - 0000000024000000
Subtract (63 early reservations)
#1 [0001000000 - 0001c4fb58] TEXT DATA BSS
#2 [0037d77000 - 0037feff29] RAMDISK
#3 [0001c50000 - 0001c5010c] BRK
#4 [00000f4f90 - 0000100000] BIOS reserved
#5 [00000f4f80 - 00000f4f90] MP-table mpf
#6 [000009f400 - 00000f1bf8] BIOS reserved
#7 [00000f1e2c - 00000f4f80] BIOS reserved
#8 [00000f1bf8 - 00000f1e2c] MP-table mpc
#9 [0000001000 - 0000003000] TRAMPOLINE
#10 [0000003000 - 0000007000] ACPI WAKEUP
#11 [0000008000 - 000000a000] PGTABLE
#12 [000000a000 - 0000011000] PGTABLE
#13 [0000011000 - 0000016040] MEMNODEMAP
#14 [0100000000 - 0100014000] NODE_DATA
#15 [0180000000 - 0180014000] NODE_DATA
#16 [0001c50140 - 0001c51140] BOOTMEM
#17 [0001c4fb80 - 0001c4fe80] BOOTMEM
#18 [0180014000 - 0180014300] BOOTMEM
#19 [0100014000 - 0100015000] BOOTMEM
#20 [0100015000 - 0100016000] BOOTMEM
#21 [0100200000 - 0103a00000] MEMMAP 0
#22 [0180200000 - 0183a00000] MEMMAP 1
#23 [0001c4fe80 - 0001c50000] BOOTMEM
#24 [0001c51140 - 0001c69140] BOOTMEM
#25 [0001c69140 - 0001c75140] BOOTMEM
#26 [0180014300 - 018002c300] BOOTMEM
#27 [0001c76000 - 0001c77000] BOOTMEM
#28 [0001c75140 - 0001c75181] BOOTMEM
#29 [0001c751c0 - 0001c75246] BOOTMEM
#30 [0001c75280 - 0001c754e8] BOOTMEM
#31 [0001c75500 - 0001c75568] BOOTMEM
#32 [0001c75580 - 0001c755e8] BOOTMEM
#33 [0001c75600 - 0001c75668] BOOTMEM
#34 [0001c75680 - 0001c756e8] BOOTMEM
#35 [0001c75700 - 0001c75768] BOOTMEM
#36 [0001c75780 - 0001c757e8] BOOTMEM
#37 [0001c75800 - 0001c75868] BOOTMEM
#38 [0001c75880 - 0001c758e8] BOOTMEM
#39 [0001c75900 - 0001c75968] BOOTMEM
#40 [0001c75980 - 0001c759e8] BOOTMEM
#41 [0001c75a00 - 0001c75a20] BOOTMEM
#42 [0001c75a40 - 0001c75a60] BOOTMEM
#43 [0001c75a80 - 0001c75b49] BOOTMEM
#44 [0001c75b80 - 0001c75c49] BOOTMEM
#45 [0001e00000 - 0001e1d000] BOOTMEM
#46 [0001f00000 - 0001f1d000] BOOTMEM
#47 [0183a00000 - 0183a1d000] BOOTMEM
#48 [0183b00000 - 0183b1d000] BOOTMEM
#49 [0001c75c80 - 0001c75c90] BOOTMEM
#50 [0001c75cc0 - 0001c75cd0] BOOTMEM
#51 [0001c75d00 - 0001c75d10] BOOTMEM
#52 [0001c75d40 - 0001c75d60] BOOTMEM
#53 [0001c75d80 - 0001c75ec0] BOOTMEM
#54 [0001c75ec0 - 0001c75f20] BOOTMEM
#55 [0001c75f40 - 0001c75fa0] BOOTMEM
#56 [0001c77000 - 0001c7f000] BOOTMEM
#57 [0020000000 - 0024000000] BOOTMEM
#58 [0001c75fc0 - 0001c75fe0] BOOTMEM
#59 [0001f1d000 - 0005f1d000] BOOTMEM
#60 [0001c7f000 - 0001c9f000] BOOTMEM
#61 [0001c9f000 - 0001cdf000] BOOTMEM
#62 [0000017040 - 000001f040] BOOTMEM
7 - 8
20 40 - 80 9f
100 100 - 1000 1000
1cdf 1d00 - 1e00 1e00
1e1d 1e40 - 1f00 1f00
5f1d 5f40 - 20000 20000
24000 24000 - 37d40 37d77
37ff0 38000 - 7fe40 7fe50
100016 100040 - 100200 100200
103a00 103a00 - 180000 180000
18002d 180040 - 180200 180200
183a1d 183a40 - 183b00 183b00
183b1d 183b40 - 27ffc0 27ffff
Memory: 8124160k/10485756k available (3844k kernel code, 2099272k absent, 262324k reserved, 5289k data, 1292k init)
SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=2
Hierarchical RCU implementation.
NR_IRQS:768
Extended CMOS year: 2000
spurious 8259A interrupt: IRQ7.
Console: colour VGA+ 80x25
console [tty0] enabled
console [ttyS0] enabled
hpet clockevent registered
Fast TSC calibration using PIT
Detected 2612.128 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 5224.25 BogoMIPS (lpj=2612128)
Security Framework initialized
SELinux: Disabled at boot.
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys devices
tseg: 0000000000
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 5 MCE banks
using C1E aware idle routine
Performance Events: AMD PMU driver.
... version: 0
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000000f
ACPI: Core revision 20100121
Setting APIC routing to flat
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Dual-Core AMD Opteron(tm) Processor 8218 stepping 02
calling migration_init+0x0/0x5a @ 1
initcall migration_init+0x0/0x5a returned 0 after 0 usecs
calling spawn_ksoftirqd+0x0/0x5a @ 1
initcall spawn_ksoftirqd+0x0/0x5a returned 0 after 0 usecs
calling init_call_single_data+0x0/0x82 @ 1
initcall init_call_single_data+0x0/0x82 returned 0 after 0 usecs
calling spawn_softlockup_task+0x0/0x75 @ 1
initcall spawn_softlockup_task+0x0/0x75 returned 0 after 0 usecs
calling relay_init+0x0/0x14 @ 1
initcall relay_init+0x0/0x14 returned 0 after 0 usecs
calling tracer_alloc_buffers+0x0/0x1d6 @ 1
initcall tracer_alloc_buffers+0x0/0x1d6 returned 0 after 0 usecs
calling init_trace_printk+0x0/0x12 @ 1
initcall init_trace_printk+0x0/0x12 returned 0 after 0 usecs
calling mce_amd_init+0x0/0x2d @ 1
initcall mce_amd_init+0x0/0x2d returned 0 after 0 usecs
Booting Node 1, Processors #1 Ok.
Booting Node 0, Processors #2 Ok.
Booting Node 1, Processors #3 Ok.
Brought up 4 CPUs
Total of 4 processors activated (20895.70 BogoMIPS).
Testing NMI watchdog ... OK.
calling init_mmap_min_addr+0x0/0x26 @ 1
initcall init_mmap_min_addr+0x0/0x26 returned 0 after 0 usecs
calling init_cpufreq_transition_notifier_list+0x0/0x1b @ 1
initcall init_cpufreq_transition_notifier_list+0x0/0x1b returned 0 after 0 usecs
calling net_ns_init+0x0/0x150 @ 1
initcall net_ns_init+0x0/0x150 returned 0 after 0 usecs
calling e820_mark_nvs_memory+0x0/0x41 @ 1
initcall e820_mark_nvs_memory+0x0/0x41 returned 0 after 0 usecs
calling cpufreq_tsc+0x0/0x28 @ 1
initcall cpufreq_tsc+0x0/0x28 returned 0 after 0 usecs
calling pci_reboot_init+0x0/0x14 @ 1
initcall pci_reboot_init+0x0/0x14 returned 0 after 0 usecs
calling init_lapic_sysfs+0x0/0x2d @ 1
initcall init_lapic_sysfs+0x0/0x2d returned 0 after 0 usecs
calling init_smp_flush+0x0/0x21 @ 1
initcall init_smp_flush+0x0/0x21 returned 0 after 0 usecs
calling alloc_frozen_cpus+0x0/0xa @ 1
initcall alloc_frozen_cpus+0x0/0xa returned 0 after 0 usecs
calling sysctl_init+0x0/0x16 @ 1
initcall sysctl_init+0x0/0x16 returned 0 after 0 usecs
calling ksysfs_init+0x0/0x94 @ 1
initcall ksysfs_init+0x0/0x94 returned 0 after 0 usecs
calling async_init+0x0/0x61 @ 1
initcall async_init+0x0/0x61 returned 0 after 0 usecs
calling init_jiffies_clocksource+0x0/0x12 @ 1
initcall init_jiffies_clocksource+0x0/0x12 returned 0 after 0 usecs
calling pm_init+0x0/0x34 @ 1
initcall pm_init+0x0/0x34 returned 0 after 0 usecs
calling pm_disk_init+0x0/0x19 @ 1
initcall pm_disk_init+0x0/0x19 returned 0 after 0 usecs
calling swsusp_header_init+0x0/0x2c @ 1
initcall swsusp_header_init+0x0/0x2c returned 0 after 0 usecs
calling init_hw_breakpoint+0x0/0x12 @ 1
initcall init_hw_breakpoint+0x0/0x12 returned 0 after 0 usecs
calling init_zero_pfn+0x0/0x35 @ 1
initcall init_zero_pfn+0x0/0x35 returned 0 after 0 usecs
calling filelock_init+0x0/0x2e @ 1
initcall filelock_init+0x0/0x2e returned 0 after 0 usecs
calling init_misc_binfmt+0x0/0x42 @ 1
initcall init_misc_binfmt+0x0/0x42 returned 0 after 0 usecs
calling init_script_binfmt+0x0/0x14 @ 1
initcall init_script_binfmt+0x0/0x14 returned 0 after 0 usecs
calling init_elf_binfmt+0x0/0x14 @ 1
initcall init_elf_binfmt+0x0/0x14 returned 0 after 0 usecs
calling init_compat_elf_binfmt+0x0/0x14 @ 1
initcall init_compat_elf_binfmt+0x0/0x14 returned 0 after 0 usecs
calling debugfs_init+0x0/0x5a @ 1
initcall debugfs_init+0x0/0x5a returned 0 after 0 usecs
calling securityfs_init+0x0/0x51 @ 1
initcall securityfs_init+0x0/0x51 returned 0 after 0 usecs
calling random32_init+0x0/0xd1 @ 1
initcall random32_init+0x0/0xd1 returned 0 after 0 usecs
calling gnttab_init+0x0/0x169 @ 1
initcall gnttab_init+0x0/0x169 returned -19 after 0 usecs
calling early_resume_init+0x0/0x19b @ 1
Time: 17:39:27 Date: 03/08/10
initcall early_resume_init+0x0/0x19b returned 0 after 1953 usecs
calling cpufreq_core_init+0x0/0x8c @ 1
initcall cpufreq_core_init+0x0/0x8c returned 0 after 0 usecs
calling cpuidle_init+0x0/0x40 @ 1
initcall cpuidle_init+0x0/0x40 returned 0 after 0 usecs
calling sock_init+0x0/0x5e @ 1
initcall sock_init+0x0/0x5e returned 0 after 0 usecs
calling netpoll_init+0x0/0x31 @ 1
initcall netpoll_init+0x0/0x31 returned 0 after 0 usecs
calling netlink_proto_init+0x0/0x14c @ 1
NET: Registered protocol family 16
initcall netlink_proto_init+0x0/0x14c returned 0 after 976 usecs
calling bdi_class_init+0x0/0x41 @ 1
initcall bdi_class_init+0x0/0x41 returned 0 after 0 usecs
calling kobject_uevent_init+0x0/0x54 @ 1
initcall kobject_uevent_init+0x0/0x54 returned 0 after 0 usecs
calling pcibus_class_init+0x0/0x19 @ 1
initcall pcibus_class_init+0x0/0x19 returned 0 after 0 usecs
calling pci_driver_init+0x0/0x12 @ 1
initcall pci_driver_init+0x0/0x12 returned 0 after 0 usecs
calling backlight_class_init+0x0/0x5d @ 1
initcall backlight_class_init+0x0/0x5d returned 0 after 0 usecs
calling xenbus_probe_init+0x0/0xcb @ 1
initcall xenbus_probe_init+0x0/0xcb returned -19 after 0 usecs
calling tty_class_init+0x0/0x38 @ 1
initcall tty_class_init+0x0/0x38 returned 0 after 0 usecs
calling vtconsole_class_init+0x0/0xc3 @ 1
initcall vtconsole_class_init+0x0/0xc3 returned 0 after 0 usecs
calling register_node_type+0x0/0x12 @ 1
initcall register_node_type+0x0/0x12 returned 0 after 0 usecs
calling i2c_init+0x0/0x6b @ 1
initcall i2c_init+0x0/0x6b returned 0 after 0 usecs
calling amd_postcore_init+0x0/0x8bd @ 1
node 0 link 1: io port [1000, 3fff]
node 1 link 2: io port [4000, ffff]
TOM: 0000000080000000 aka 2048M
node 0 link 1: mmio [e8000000, fddfffff]
node 1 link 2: mmio [fde00000, fdffffff]
node 0 link 1: mmio [80000000, 83ffffff]
node 1 link 2: mmio [84000000, 8fffffff]
node 0 link 1: mmio [a0000, bffff]
TOM2: 0000000280000000 aka 10240M
bus: [00, 3f] on node 0 link 1
bus: 00 index 0 [io 0x0000-0x3fff]
bus: 00 index 1 [mem 0x90000000-0xfddfffff]
bus: 00 index 2 [mem 0x80000000-0x83ffffff]
bus: 00 index 3 [mem 0x000a0000-0x000bffff]
bus: 00 index 4 [mem 0xfe000000-0xffffffff]
bus: 00 index 5 [mem 0x280000000-0xfcffffffff]
bus: [40, ff] on node 1 link 2
bus: 40 index 0 [io 0x4000-0xffff]
bus: 40 index 1 [mem 0xfde00000-0xfdffffff]
bus: 40 index 2 [mem 0x84000000-0x8fffffff]
initcall amd_postcore_init+0x0/0x8bd returned 0 after 22460 usecs
calling arch_kdebugfs_init+0x0/0x242 @ 1
initcall arch_kdebugfs_init+0x0/0x242 returned 0 after 0 usecs
calling mtrr_if_init+0x0/0x63 @ 1
initcall mtrr_if_init+0x0/0x63 returned 0 after 0 usecs
calling ffh_cstate_init+0x0/0x2a @ 1
initcall ffh_cstate_init+0x0/0x2a returned -1 after 0 usecs
initcall ffh_cstate_init+0x0/0x2a returned with error code -1
calling acpi_pci_init+0x0/0x5c @ 1
ACPI: bus type pci registered
initcall acpi_pci_init+0x0/0x5c returned 0 after 976 usecs
calling setup_vcpu_hotplug_event+0x0/0x22 @ 1
initcall setup_vcpu_hotplug_event+0x0/0x22 returned -19 after 0 usecs
calling dmi_id_init+0x0/0x31a @ 1
initcall dmi_id_init+0x0/0x31a returned 0 after 0 usecs
calling dma_bus_init+0x0/0x3f @ 1
initcall dma_bus_init+0x0/0x3f returned 0 after 0 usecs
calling dma_channel_table_init+0x0/0xbf @ 1
initcall dma_channel_table_init+0x0/0xbf returned 0 after 0 usecs
calling pci_arch_init+0x0/0x69 @ 1
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0x80000000-0x8fffffff] (base 0x80000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
PCI: HP ProLiant BL685c G1 detected, enabling pci=bfsort.
initcall pci_arch_init+0x0/0x69 returned 0 after 3906 usecs
calling topology_init+0x0/0x86 @ 1
initcall topology_init+0x0/0x86 returned 0 after 0 usecs
calling mtrr_init_finialize+0x0/0x3d @ 1
initcall mtrr_init_finialize+0x0/0x3d returned 0 after 0 usecs
calling param_sysfs_init+0x0/0x216 @ 1
initcall param_sysfs_init+0x0/0x216 returned 0 after 4882 usecs
calling pm_sysrq_init+0x0/0x19 @ 1
initcall pm_sysrq_init+0x0/0x19 returned 0 after 0 usecs
calling audit_watch_init+0x0/0x2f @ 1
initcall audit_watch_init+0x0/0x2f returned 0 after 0 usecs
calling init_slow_work+0x0/0x39 @ 1
initcall init_slow_work+0x0/0x39 returned 0 after 0 usecs
calling default_bdi_init+0x0/0xb6 @ 1
initcall default_bdi_init+0x0/0xb6 returned 0 after 0 usecs
calling init_bio+0x0/0xe2 @ 1
bio: create slab <bio-0> at 0
initcall init_bio+0x0/0xe2 returned 0 after 976 usecs
calling fsnotify_init+0x0/0x12 @ 1
initcall fsnotify_init+0x0/0x12 returned 0 after 0 usecs
calling fsnotify_notification_init+0x0/0x68 @ 1
initcall fsnotify_notification_init+0x0/0x68 returned 0 after 0 usecs
calling cryptomgr_init+0x0/0x12 @ 1
initcall cryptomgr_init+0x0/0x12 returned 0 after 0 usecs
calling blk_settings_init+0x0/0x2a @ 1
initcall blk_settings_init+0x0/0x2a returned 0 after 0 usecs
calling blk_ioc_init+0x0/0x2a @ 1
initcall blk_ioc_init+0x0/0x2a returned 0 after 0 usecs
calling blk_softirq_init+0x0/0x6e @ 1
initcall blk_softirq_init+0x0/0x6e returned 0 after 0 usecs
calling blk_iopoll_setup+0x0/0x6e @ 1
initcall blk_iopoll_setup+0x0/0x6e returned 0 after 0 usecs
calling genhd_device_init+0x0/0x66 @ 1
initcall genhd_device_init+0x0/0x66 returned 0 after 0 usecs
calling pci_slot_init+0x0/0x45 @ 1
initcall pci_slot_init+0x0/0x45 returned 0 after 0 usecs
calling fbmem_init+0x0/0x98 @ 1
initcall fbmem_init+0x0/0x98 returned 0 after 0 usecs
calling acpi_init+0x0/0x2d8 @ 1
ACPI: EC: Look up EC in DSDT
ACPI: SSDT 000000007fe58000 004F0 (v02 HP PNOWSSDT 00000002 HP 00000001)
ACPI: Interpreter enabled
ACPI: (supports S0 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0x80000000-0x8fffffff] (base 0x80000000)
PCI: MMCONFIG at [mem 0x80000000-0x8fffffff] reserved in ACPI motherboard resources
initcall acpi_init+0x0/0x2d8 returned 0 after 41015 usecs
calling dock_init+0x0/0xa5 @ 1
ACPI: No dock devices found.
initcall dock_init+0x0/0xa5 returned 0 after 976 usecs
calling acpi_pci_root_init+0x0/0x2d @ 1
PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci_root PNP0A03:00: host bridge window [io 0x0000-0x03af] (ignored)
pci_root PNP0A03:00: host bridge window [io 0x03b0-0x03bb] (ignored)
pci_root PNP0A03:00: host bridge window [io 0x03c0-0x03df] (ignored)
pci_root PNP0A03:00: host bridge window [io 0x03e0-0x0fff] (ignored)
pci_root PNP0A03:00: host bridge window [io 0x1000-0x3fff] (ignored)
pci_root PNP0A03:00: host bridge window [mem 0xe8000000-0xfddfffff] (ignored)
pci_root PNP0A03:00: host bridge window [mem 0x80000000-0x83ffffff] (ignored)
pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
pci 0000:00:02.0: reg 10: [mem 0xf7de0000-0xf7de0fff]
pci 0000:00:02.0: supports D1 D2
pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:02.0: PME# disabled
pci 0000:00:02.1: reg 10: [mem 0xf7dd0000-0xf7dd00ff]
pci 0000:00:02.1: supports D1 D2
pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:02.1: PME# disabled
pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0b.0: PME# disabled
pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0c.0: PME# disabled
pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0d.0: PME# disabled
pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0e.0: PME# disabled
PCI: peer root bus 00 res updated from pci conf
pci 0000:01:03.0: reg 10: [mem 0xe8000000-0xefffffff pref]
pci 0000:01:03.0: reg 14: [io 0x1000-0x10ff]
pci 0000:01:03.0: reg 18: [mem 0xf7ff0000-0xf7ffffff]
pci 0000:01:03.0: reg 30: [mem 0x00000000-0x0001ffff pref]
pci 0000:01:03.0: supports D1 D2
pci 0000:01:04.0: reg 10: [io 0x2800-0x28ff]
pci 0000:01:04.0: reg 14: [mem 0xf7fe0000-0xf7fe01ff]
pci 0000:01:04.0: PME# supported from D0 D3hot D3cold
pci 0000:01:04.0: PME# disabled
pci 0000:01:04.2: reg 10: [io 0x1400-0x14ff]
pci 0000:01:04.2: reg 14: [mem 0xf7fd0000-0xf7fd07ff]
pci 0000:01:04.2: reg 18: [mem 0xf7fc0000-0xf7fc3fff]
pci 0000:01:04.2: reg 1c: [mem 0xf7f00000-0xf7f7ffff]
pci 0000:01:04.2: reg 30: [mem 0x00000000-0x0000ffff pref]
pci 0000:01:04.2: PME# supported from D0 D3hot D3cold
pci 0000:01:04.2: PME# disabled
pci 0000:01:04.4: reg 20: [io 0x1800-0x181f]
pci 0000:01:04.4: PME# supported from D0 D3hot D3cold
pci 0000:01:04.4: PME# disabled
pci 0000:01:04.6: reg 10: [mem 0xf7ef0000-0xf7ef00ff]
pci 0000:01:04.6: PME# supported from D0 D3hot D3cold
pci 0000:01:04.6: PME# disabled
pci 0000:00:09.0: PCI bridge to [bus 01-01] (subtractive decode)
pci 0000:00:09.0: bridge window [io 0x1000-0x2fff]
pci 0000:00:09.0: bridge window [mem 0xf7e00000-0xf7ffffff]
pci 0000:00:09.0: bridge window [mem 0xe8000000-0xefffffff pref]
pci 0000:00:09.0: bridge window [io 0x0000-0x3fff] (subtractive decode)
pci 0000:00:09.0: bridge window [mem 0x90000000-0xfddfffff] (subtractive decode)
pci 0000:00:09.0: bridge window [mem 0x80000000-0x83ffffff] (subtractive decode)
pci 0000:00:09.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:09.0: bridge window [mem 0xfe000000-0xffffffff] (subtractive decode)
pci 0000:00:09.0: bridge window [mem 0x280000000-0xfcffffffff] (subtractive decode)
pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
pci 0000:02:00.0: PME# disabled
pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:0b.0: PCI bridge to [bus 02-03]
pci 0000:00:0b.0: bridge window [io fffffffffffff000 - 0000] reg reading
pci 0000:00:0b.0: bridge window [mem 0xf8000000-0xf9ffffff]
pci 0000:00:0b.0: bridge window [mem 0xfff00000 - 000fffff pref] reg reading
pci 0000:03:00.0: reg 10: [mem 0xf8000000-0xf9ffffff 64bit]
pci 0000:03:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
pci 0000:03:00.0: PME# supported from D3hot D3cold
pci 0000:03:00.0: PME# disabled
pci 0000:02:00.0: PCI bridge to [bus 03-03]
pci 0000:02:00.0: bridge window [io fffffffffffff000 - 0000] reg reading
pci 0000:02:00.0: bridge window [mem 0xf8000000-0xf9ffffff]
pci 0000:02:00.0: bridge window [mem 0xfff00000 - 000fffff pref] reg reading
pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
pci 0000:04:00.0: PME# disabled
pci 0000:04:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:0c.0: PCI bridge to [bus 04-05]
pci 0000:00:0c.0: bridge window [io fffffffffffff000 - 0000] reg reading
pci 0000:00:0c.0: bridge window [mem 0xfa000000-0xfbffffff]
pci 0000:00:0c.0: bridge window [mem 0xfff00000 - 000fffff pref] reg reading
pci 0000:05:00.0: reg 10: [mem 0xfa000000-0xfbffffff 64bit]
pci 0000:05:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
pci 0000:05:00.0: PME# supported from D3hot D3cold
pci 0000:05:00.0: PME# disabled
pci 0000:04:00.0: PCI bridge to [bus 05-05]
pci 0000:04:00.0: bridge window [io fffffffffffff000 - 0000] reg reading
pci 0000:04:00.0: bridge window [mem 0xfa000000-0xfbffffff]
pci 0000:04:00.0: bridge window [mem 0xfff00000 - 000fffff pref] reg reading
pci 0000:06:00.0: PME# supported from D0 D3hot D3cold
pci 0000:06:00.0: PME# disabled
pci 0000:06:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:0d.0: PCI bridge to [bus 06-07]
pci 0000:00:0d.0: bridge window [io fffffffffffff000 - 0000] reg reading
pci 0000:00:0d.0: bridge window [mem 0xfdc00000-0xfdcfffff]
pci 0000:00:0d.0: bridge window [mem 0xfff00000 - 000fffff pref] reg reading
pci 0000:07:04.0: reg 10: [mem 0xfdcf0000-0xfdcfffff 64bit]
pci 0000:07:04.0: reg 18: [mem 0xfdce0000-0xfdceffff 64bit]
pci 0000:07:04.0: PME# supported from D3hot D3cold
pci 0000:07:04.0: PME# disabled
pci 0000:07:04.1: reg 10: [mem 0xfdcd0000-0xfdcdffff 64bit]
pci 0000:07:04.1: reg 18: [mem 0xfdcc0000-0xfdccffff 64bit]
pci 0000:07:04.1: PME# supported from D3hot D3cold
pci 0000:07:04.1: PME# disabled
pci 0000:06:00.0: PCI bridge to [bus 07-07]
pci 0000:06:00.0: bridge window [io fffffffffffff000 - 0000] reg reading
pci 0000:06:00.0: bridge window [mem 0xfdc00000-0xfdcfffff]
pci 0000:06:00.0: bridge window [mem 0xfff00000 - 000fffff pref] reg reading
pci 0000:08:00.0: reg 10: [mem 0xfddf0000-0xfddf0fff 64bit]
pci 0000:08:00.0: reg 18: [mem 0xfdde0000-0xfdde00ff 64bit]
pci 0000:08:00.0: reg 20: [io 0x3000-0x30ff]
pci 0000:08:00.0: reg 30: [mem 0x00000000-0x0003ffff pref]
pci 0000:08:00.1: reg 10: [mem 0xfddd0000-0xfddd0fff 64bit]
pci 0000:08:00.1: reg 18: [mem 0xfddc0000-0xfddc00ff 64bit]
pci 0000:08:00.1: reg 20: [io 0x3400-0x34ff]
pci 0000:08:00.1: reg 30: [mem 0x00000000-0x0003ffff pref]
pci 0000:08:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:0e.0: PCI bridge to [bus 08-0a]
pci 0000:00:0e.0: bridge window [io 0x3000-0x3fff]
pci 0000:00:0e.0: bridge window [mem 0xfdd00000-0xfddfffff]
pci 0000:00:0e.0: bridge window [mem 0xfff00000 - 000fffff pref] reg reading
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.IP2P._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.CPE0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.CPE1.NB01._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.CPE2.NC1B._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.CPE3.NC2B._PRT]
ACPI: PCI Root Bridge [PCI1] (0000:40)
pci_root PNP0A03:01: host bridge window [io 0x4000-0xffff] (ignored)
pci_root PNP0A03:01: host bridge window [mem 0xfde00000-0xfdffffff] (ignored)
pci_root PNP0A03:01: host bridge window [mem 0x84000000-0x8fffffff] (ignored)
pci 0000:40:01.0: reg 14: [mem 0xfdef0000-0xfdef0fff]
pci 0000:40:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:40:0c.0: PME# disabled
pci 0000:40:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:40:0d.0: PME# disabled
pci 0000:40:0e.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:40:0e.0: PME# disabled
PCI: peer root bus 40 res updated from pci conf
pci 0000:41:00.0: PME# supported from D0 D3hot D3cold
pci 0000:41:00.0: PME# disabled
pci 0000:41:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:40:0c.0: PCI bridge to [bus 41-43]
pci 0000:40:0c.0: bridge window [io 0x4000-0x4fff]
pci 0000:40:0c.0: bridge window [mem 0xfdf00000-0xfdffffff]
pci 0000:40:0c.0: bridge window [mem 0xfff00000 - 000fffff pref] reg reading
pci 0000:42:08.0: reg 10: [mem 0xfdf80000-0xfdffffff 64bit]
pci 0000:42:08.0: reg 18: [io 0x4000-0x40ff]
pci 0000:42:08.0: reg 1c: [mem 0xfdf70000-0xfdf77fff]
pci 0000:42:08.0: reg 30: [mem 0x00000000-0x00003fff pref]
pci 0000:42:08.0: supports D1
pci 0000:41:00.0: PCI bridge to [bus 42-43]
pci 0000:41:00.0: bridge window [io 0x4000-0x4fff]
pci 0000:41:00.0: bridge window [mem 0xfdf00000-0xfdffffff]
pci 0000:41:00.0: bridge window [mem 0xfff00000 - 000fffff pref] reg reading
pci 0000:42:04.0: PCI bridge to [bus 43-43]
pci 0000:42:04.0: bridge window [io fffffffffffff000 - 0000] reg reading
pci 0000:42:04.0: bridge window [mem 0xfff00000 - 0x000fffff] reg reading
pci 0000:42:04.0: bridge window [mem 0xfff00000 - 000fffff pref] reg reading
pci 0000:40:0d.0: PCI bridge to [bus 44-46]
pci 0000:40:0d.0: bridge window [io fffffffffffff000 - 0000] reg reading
pci 0000:40:0d.0: bridge window [mem 0xfff00000 - 0x000fffff] reg reading
pci 0000:40:0d.0: bridge window [mem 0xfff00000 - 000fffff pref] reg reading
pci 0000:40:0e.0: PCI bridge to [bus 47-49]
pci 0000:40:0e.0: bridge window [io fffffffffffff000 - 0000] reg reading
pci 0000:40:0e.0: bridge window [mem 0xfff00000 - 0x000fffff] reg reading
pci 0000:40:0e.0: bridge window [mem 0xfff00000 - 000fffff pref] reg reading
ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.IPE0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.IPE1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.IPE2.SASB._PRT]
initcall acpi_pci_root_init+0x0/0x2d returned 0 after 177734 usecs
calling acpi_pci_link_init+0x0/0x43 @ 1
ACPI: PCI Interrupt Link [LNKW] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [LNKX] (IRQs 17) *0, disabled.
ACPI: PCI Interrupt Link [LNKY] (IRQs 18) *0, disabled.
ACPI: PCI Interrupt Link [LNKZ] (IRQs 19) *0, disabled.
ACPI: PCI Interrupt Link [LNU0] (IRQs 22) *5
ACPI: PCI Interrupt Link [LNU2] (IRQs 23) *7
ACPI: PCI Interrupt Link [LNKA] (IRQs 54) *0, disabled.
ACPI: PCI Interrupt Link [LNKB] (IRQs 55) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 56) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 57) *0, disabled.
initcall acpi_pci_link_init+0x0/0x43 returned 0 after 27343 usecs
calling pnp_init+0x0/0x12 @ 1
initcall pnp_init+0x0/0x12 returned 0 after 0 usecs
calling setup_shutdown_event+0x0/0x14 @ 1
initcall setup_shutdown_event+0x0/0x14 returned 0 after 0 usecs
calling balloon_init+0x0/0x1b1 @ 1
initcall balloon_init+0x0/0x1b1 returned -19 after 0 usecs
calling misc_init+0x0/0xb8 @ 1
initcall misc_init+0x0/0xb8 returned 0 after 0 usecs
calling vga_arb_device_init+0x0/0x78 @ 1
vgaarb: device added: PCI:0000:01:03.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
initcall vga_arb_device_init+0x0/0x78 returned 0 after 1953 usecs
calling cn_init+0x0/0x9e @ 1
initcall cn_init+0x0/0x9e returned 0 after 0 usecs
calling init_scsi+0x0/0x91 @ 1
SCSI subsystem initialized
initcall init_scsi+0x0/0x91 returned 0 after 976 usecs
calling ata_init+0x0/0x34e @ 1
libata version 3.00 loaded.
initcall ata_init+0x0/0x34e returned 0 after 13671 usecs
calling init_pcmcia_cs+0x0/0x25 @ 1
initcall init_pcmcia_cs+0x0/0x25 returned 0 after 0 usecs
calling usb_init+0x0/0x175 @ 1
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
initcall usb_init+0x0/0x175 returned 0 after 50781 usecs
calling serio_init+0x0/0x89 @ 1
initcall serio_init+0x0/0x89 returned 0 after 976 usecs
calling input_init+0x0/0x132 @ 1
initcall input_init+0x0/0x132 returned 0 after 0 usecs
calling rtc_init+0x0/0x71 @ 1
initcall rtc_init+0x0/0x71 returned 0 after 0 usecs
calling power_supply_class_init+0x0/0x38 @ 1
initcall power_supply_class_init+0x0/0x38 returned 0 after 0 usecs
calling thermal_init+0x0/0x40 @ 1
initcall thermal_init+0x0/0x40 returned 0 after 0 usecs
calling md_init+0x0/0xd0 @ 1
initcall md_init+0x0/0xd0 returned 0 after 0 usecs
calling leds_init+0x0/0x40 @ 1
initcall leds_init+0x0/0x40 returned 0 after 0 usecs
calling pci_subsys_init+0x0/0xdb @ 1
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
reserve RAM buffer: 000000000009f400 - 000000000009ffff
reserve RAM buffer: 000000007fe50000 - 000000007fffffff
reserve RAM buffer: 000000027ffff000 - 000000027fffffff initcall pci_subsys_init+0x0/0xdb returned 0 after 109375 usecs
calling proto_init+0x0/0x12 @ 1
initcall proto_init+0x0/0x12 returned 0 after 0 usecs
calling net_dev_init+0x0/0x177 @ 1
initcall net_dev_init+0x0/0x177 returned 0 after 0 usecs
calling neigh_init+0x0/0x71 @ 1
initcall neigh_init+0x0/0x71 returned 0 after 0 usecs
calling fib_rules_init+0x0/0xa6 @ 1
initcall fib_rules_init+0x0/0xa6 returned 0 after 0 usecs
calling pktsched_init+0x0/0xdc @ 1
initcall pktsched_init+0x0/0xdc returned 0 after 0 usecs
calling tc_filter_init+0x0/0x4c @ 1
initcall tc_filter_init+0x0/0x4c returned 0 after 0 usecs
calling tc_action_init+0x0/0x4c @ 1
initcall tc_action_init+0x0/0x4c returned 0 after 0 usecs
calling genl_init+0x0/0x8f @ 1
initcall genl_init+0x0/0x8f returned 0 after 0 usecs
calling cipso_v4_init+0x0/0x67 @ 1
initcall cipso_v4_init+0x0/0x67 returned 0 after 0 usecs
calling wireless_nlevent_init+0x0/0x12 @ 1
initcall wireless_nlevent_init+0x0/0x12 returned 0 after 0 usecs
calling netlbl_init+0x0/0x83 @ 1
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
initcall netlbl_init+0x0/0x83 returned 0 after 51757 usecs
calling sysctl_init+0x0/0x49 @ 1
initcall sysctl_init+0x0/0x49 returned 0 after 0 usecs
calling print_ICs+0x0/0x506 @ 1
initcall print_ICs+0x0/0x506 returned 0 after 0 usecs
calling hpet_late_init+0x0/0x1ed @ 1
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
hpet0: 3 comparators, 32-bit 25.000000 MHz counter
initcall hpet_late_init+0x0/0x1ed returned 0 after 52734 usecs
calling clocksource_done_booting+0x0/0x36 @ 1
Switching to clocksource hpet
initcall clocksource_done_booting+0x0/0x36 returned 0 after 15707 usecs
calling rb_init_debugfs+0x0/0x2f @ 1
initcall rb_init_debugfs+0x0/0x2f returned 0 after 4 usecs
calling tracer_init_debugfs+0x0/0x362 @ 1
initcall tracer_init_debugfs+0x0/0x362 returned 0 after 82 usecs
calling init_trace_printk_function_export+0x0/0x2f @ 1
initcall init_trace_printk_function_export+0x0/0x2f returned 0 after 2 usecs
calling event_trace_init+0x0/0x1eb @ 1
initcall event_trace_init+0x0/0x1eb returned 0 after 1131 usecs
calling init_kprobe_trace+0x0/0x78 @ 1
initcall init_kprobe_trace+0x0/0x78 returned 0 after 5 usecs
calling init_pipe_fs+0x0/0x4c @ 1
initcall init_pipe_fs+0x0/0x4c returned 0 after 13 usecs
calling eventpoll_init+0x0/0xc3 @ 1
initcall eventpoll_init+0x0/0xc3 returned 0 after 6 usecs
calling anon_inode_init+0x0/0x123 @ 1
initcall anon_inode_init+0x0/0x123 returned 0 after 6 usecs
calling blk_scsi_ioctl_init+0x0/0x289 @ 1
initcall blk_scsi_ioctl_init+0x0/0x289 returned 0 after 1 usecs
calling acpi_event_init+0x0/0x80 @ 1
initcall acpi_event_init+0x0/0x80 returned 0 after 10 usecs
calling pnpacpi_init+0x0/0x8c @ 1
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 11 devices
ACPI: ACPI bus type pnp unregistered
initcall pnpacpi_init+0x0/0x8c returned 0 after 54667 usecs
calling pnp_system_init+0x0/0x12 @ 1
system 00:01: [io 0x0408-0x040f] has been reserved
system 00:01: [io 0x04d0-0x04d1] has been reserved
system 00:01: [io 0x0700-0x073f] has been reserved
system 00:01: [io 0x0800-0x08fe] has been reserved
system 00:01: [io 0x0900-0x09fe] has been reserved
system 00:01: [io 0x09ff] has been reserved
system 00:01: [io 0x0a00-0x0afe] has been reserved
system 00:01: [io 0x0aff] has been reserved
system 00:01: [io 0x0b00-0x0bfe] has been reserved
system 00:01: [io 0x0bff] has been reserved
system 00:01: [io 0x0c80-0x0c83] has been reserved
system 00:01: [io 0x0cd4-0x0cd7] has been reserved
system 00:01: [io 0x0f50-0x0f58] has been reserved
system 00:01: [io 0x0ca0-0x0ca1] has been reserved
system 00:01: [io 0x0ca4-0x0ca5] has been reserved
system 00:01: [io 0x0cf9] could not be reserved
system 00:01: [io 0x03f8-0x03ff] has been reserved
system 00:01: [mem 0x80000000-0x8fffffff] could not be reserved
system 00:01: [mem 0xf7df0000-0xf7df0fff] could not be reserved
system 00:01: [mem 0xfdef0000-0xfdef0fff] could not be reserved
initcall pnp_system_init+0x0/0x12 returned 0 after 386706 usecs
calling chr_dev_init+0x0/0xc7 @ 1
initcall chr_dev_init+0x0/0xc7 returned 0 after 527 usecs
calling firmware_class_init+0x0/0x79 @ 1
initcall firmware_class_init+0x0/0x79 returned 0 after 48 usecs
calling init_pcmcia_bus+0x0/0x65 @ 1
initcall init_pcmcia_bus+0x0/0x65 returned 0 after 61 usecs
calling cpufreq_gov_performance_init+0x0/0x12 @ 1
initcall cpufreq_gov_performance_init+0x0/0x12 returned 0 after 1 usecs
calling cpufreq_gov_dbs_init+0x0/0xaf @ 1
initcall cpufreq_gov_dbs_init+0x0/0xaf returned 0 after 253 usecs
calling init_acpi_pm_clocksource+0x0/0xef @ 1
initcall init_acpi_pm_clocksource+0x0/0xef returned 0 after 4425 usecs
calling pcibios_assign_resources+0x0/0x76 @ 1
PCI: max bus depth: 3 pci_try_num: 4
pci 0000:00:0b.0: BAR 9: assigned [mem 0x90000000-0x900fffff pref]
pci 0000:00:0c.0: BAR 9: assigned [mem 0x90100000-0x901fffff pref]
pci 0000:00:0e.0: BAR 9: assigned [mem 0x90200000-0x902fffff pref]
pci 0000:01:03.0: BAR 6: assigned [mem 0xf7e00000-0xf7e1ffff pref]
pci 0000:01:04.2: BAR 6: assigned [mem 0xf7e20000-0xf7e2ffff pref]
pci 0000:00:09.0: PCI bridge to [bus 01-01]
pci 0000:00:09.0: bridge window [io 0x1000-0x2fff]
pci 0000:00:09.0: bridge window [mem 0xf7e00000-0xf7ffffff]
pci 0000:00:09.0: bridge window [mem 0xe8000000-0xefffffff pref]
pci 0000:02:00.0: BAR 9: assigned [mem 0x90000000-0x900fffff pref]
pci 0000:03:00.0: BAR 6: assigned [mem 0x90000000-0x9001ffff pref]
pci 0000:02:00.0: PCI bridge to [bus 03-03]
pci 0000:02:00.0: bridge window [io disabled]
pci 0000:02:00.0: bridge window [mem 0xf8000000-0xf9ffffff]
pci 0000:02:00.0: bridge window [mem 0x90000000-0x900fffff pref]
pci 0000:00:0b.0: PCI bridge to [bus 02-03]
pci 0000:00:0b.0: bridge window [io disabled]
pci 0000:00:0b.0: bridge window [mem 0xf8000000-0xf9ffffff]
pci 0000:00:0b.0: bridge window [mem 0x90000000-0x900fffff pref]
pci 0000:04:00.0: BAR 9: assigned [mem 0x90100000-0x901fffff pref]
pci 0000:05:00.0: BAR 6: assigned [mem 0x90100000-0x9011ffff pref]
pci 0000:04:00.0: PCI bridge to [bus 05-05]
pci 0000:04:00.0: bridge window [io disabled]
pci 0000:04:00.0: bridge window [mem 0xfa000000-0xfbffffff]
pci 0000:04:00.0: bridge window [mem 0x90100000-0x901fffff pref]
pci 0000:00:0c.0: PCI bridge to [bus 04-05]
pci 0000:00:0c.0: bridge window [io disabled]
pci 0000:00:0c.0: bridge window [mem 0xfa000000-0xfbffffff]
pci 0000:00:0c.0: bridge window [mem 0x90100000-0x901fffff pref]
pci 0000:06:00.0: PCI bridge to [bus 07-07]
pci 0000:06:00.0: bridge window [io disabled]
pci 0000:06:00.0: bridge window [mem 0xfdc00000-0xfdcfffff]
pci 0000:06:00.0: bridge window [mem pref disabled]
pci 0000:00:0d.0: PCI bridge to [bus 06-07]
pci 0000:00:0d.0: bridge window [io disabled]
pci 0000:00:0d.0: bridge window [mem 0xfdc00000-0xfdcfffff]
pci 0000:00:0d.0: bridge window [mem pref disabled]
pci 0000:08:00.0: BAR 6: assigned [mem 0x90200000-0x9023ffff pref]
pci 0000:08:00.1: BAR 6: assigned [mem 0x90240000-0x9027ffff pref]
pci 0000:00:0e.0: PCI bridge to [bus 08-0a]
pci 0000:00:0e.0: bridge window [io 0x3000-0x3fff]
pci 0000:00:0e.0: bridge window [mem 0xfdd00000-0xfddfffff]
pci 0000:00:0e.0: bridge window [mem 0x90200000-0x902fffff pref]
pci 0000:40:0c.0: BAR 9: assigned [mem 0x84000000-0x840fffff pref]
pci 0000:41:00.0: BAR 9: assigned [mem 0x84000000-0x840fffff pref]
pci 0000:42:08.0: BAR 6: assigned [mem 0x84000000-0x84003fff pref]
pci 0000:42:04.0: PCI bridge to [bus 43-43]
pci 0000:42:04.0: bridge window [io disabled]
pci 0000:42:04.0: bridge window [mem disabled]
pci 0000:42:04.0: bridge window [mem pref disabled]
pci 0000:41:00.0: PCI bridge to [bus 42-43]
pci 0000:41:00.0: bridge window [io 0x4000-0x4fff]
pci 0000:41:00.0: bridge window [mem 0xfdf00000-0xfdffffff]
pci 0000:41:00.0: bridge window [mem 0x84000000-0x840fffff pref]
pci 0000:40:0c.0: PCI bridge to [bus 41-43]
pci 0000:40:0c.0: bridge window [io 0x4000-0x4fff]
pci 0000:40:0c.0: bridge window [mem 0xfdf00000-0xfdffffff]
pci 0000:40:0c.0: bridge window [mem 0x84000000-0x840fffff pref]
pci 0000:40:0d.0: PCI bridge to [bus 44-46]
pci 0000:40:0d.0: bridge window [io disabled]
pci 0000:40:0d.0: bridge window [mem disabled]
pci 0000:40:0d.0: bridge window [mem pref disabled]
pci 0000:40:0e.0: PCI bridge to [bus 47-49]
pci 0000:40:0e.0: bridge window [io disabled]
pci 0000:40:0e.0: bridge window [mem disabled]
pci 0000:40:0e.0: bridge window [mem pref disabled]
pci 0000:00:09.0: setting latency timer to 64
pci 0000:00:0b.0: setting latency timer to 64
pci 0000:02:00.0: setting latency timer to 64
pci 0000:00:0c.0: setting latency timer to 64
pci 0000:04:00.0: setting latency timer to 64
pci 0000:00:0d.0: setting latency timer to 64
pci 0000:06:00.0: setting latency timer to 64
pci 0000:00:0e.0: setting latency timer to 64
pci 0000:40:0c.0: setting latency timer to 64
pci 0000:41:00.0: setting latency timer to 64
pci 0000:40:0d.0: setting latency timer to 64
pci 0000:40:0e.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io 0x0000-0x3fff]
pci_bus 0000:00: resource 5 [mem 0x90000000-0xfddfffff]
pci_bus 0000:00: resource 6 [mem 0x80000000-0x83ffffff]
pci_bus 0000:00: resource 7 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 8 [mem 0xfe000000-0xffffffff]
pci_bus 0000:00: resource 9 [mem 0x280000000-0xfcffffffff]
pci_bus 0000:01: resource 0 [io 0x1000-0x2fff]
pci_bus 0000:01: resource 1 [mem 0xf7e00000-0xf7ffffff]
pci_bus 0000:01: resource 2 [mem 0xe8000000-0xefffffff pref]
pci_bus 0000:01: resource 4 [io 0x0000-0x3fff]
pci_bus 0000:01: resource 5 [mem 0x90000000-0xfddfffff]
pci_bus 0000:01: resource 6 [mem 0x80000000-0x83ffffff]
pci_bus 0000:01: resource 7 [mem 0x000a0000-0x000bffff]
pci_bus 0000:01: resource 8 [mem 0xfe000000-0xffffffff]
pci_bus 0000:01: resource 9 [mem 0x280000000-0xfcffffffff]
pci_bus 0000:02: resource 1 [mem 0xf8000000-0xf9ffffff]
pci_bus 0000:02: resource 2 [mem 0x90000000-0x900fffff pref]
pci_bus 0000:03: resource 1 [mem 0xf8000000-0xf9ffffff]
pci_bus 0000:03: resource 2 [mem 0x90000000-0x900fffff pref]
pci_bus 0000:04: resource 1 [mem 0xfa000000-0xfbffffff]
pci_bus 0000:04: resource 2 [mem 0x90100000-0x901fffff pref]
pci_bus 0000:05: resource 1 [mem 0xfa000000-0xfbffffff]
pci_bus 0000:05: resource 2 [mem 0x90100000-0x901fffff pref]
pci_bus 0000:06: resource 1 [mem 0xfdc00000-0xfdcfffff]
pci_bus 0000:07: resource 1 [mem 0xfdc00000-0xfdcfffff]
pci_bus 0000:08: resource 0 [io 0x3000-0x3fff]
pci_bus 0000:08: resource 1 [mem 0xfdd00000-0xfddfffff]
pci_bus 0000:08: resource 2 [mem 0x90200000-0x902fffff pref]
pci_bus 0000:40: resource 4 [io 0x4000-0xffff]
pci_bus 0000:40: resource 5 [mem 0xfde00000-0xfdffffff]
pci_bus 0000:40: resource 6 [mem 0x84000000-0x8fffffff]
pci_bus 0000:41: resource 0 [io 0x4000-0x4fff]
pci_bus 0000:41: resource 1 [mem 0xfdf00000-0xfdffffff]
pci_bus 0000:41: resource 2 [mem 0x84000000-0x840fffff pref]
pci_bus 0000:42: resource 0 [io 0x4000-0x4fff]
pci_bus 0000:42: resource 1 [mem 0xfdf00000-0xfdffffff]
pci_bus 0000:42: resource 2 [mem 0x84000000-0x840fffff pref]
initcall pcibios_assign_resources+0x0/0x76 returned 0 after 2256839 usecs
calling sysctl_core_init+0x0/0x38 @ 1
initcall sysctl_core_init+0x0/0x38 returned 0 after 8 usecs
calling inet_init+0x0/0x204 @ 1
NET: Registered protocol family 2
IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP reno registered
UDP hash table entries: 4096 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
initcall inet_init+0x0/0x204 returned 0 after 148847 usecs
calling af_unix_init+0x0/0x55 @ 1
NET: Registered protocol family 1
initcall af_unix_init+0x0/0x55 returned 0 after 17666 usecs
calling pci_apply_final_quirks+0x0/0xef @ 1
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:0b.0: Found disabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:0c.0: Found enabled HT MSI Mapping
pci 0000:00:0d.0: Found enabled HT MSI Mapping
pci 0000:00:0e.0: Found enabled HT MSI Mapping
pci 0000:01:03.0: Boot video device
pci 0000:01:04.4: HCRESET not completed yet!
pci 0000:40:0c.0: Found enabled HT MSI Mapping
pci 0000:40:0d.0: Found enabled HT MSI Mapping
pci 0000:40:0e.0: Found enabled HT MSI Mapping
PCI: CLS 64 bytes, default 64
initcall pci_apply_final_quirks+0x0/0xef returned 0 after 238159 usecs
calling populate_rootfs+0x0/0x237 @ 1
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 2531k freed
initcall populate_rootfs+0x0/0x237 returned 0 after 78742 usecs
calling pci_iommu_init+0x0/0x31 @ 1
PCI-DMA: Disabling AGP.
PCI-DMA: aperture base @ 20000000 size 65536 KB
PCI-DMA: using GART IOMMU.
PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
initcall pci_iommu_init+0x0/0x31 returned 0 after 72668 usecs
calling calgary_fixup_tce_spaces+0x0/0xee @ 1
initcall calgary_fixup_tce_spaces+0x0/0xee returned -19 after 0 usecs
calling i8259A_init_sysfs+0x0/0x22 @ 1
initcall i8259A_init_sysfs+0x0/0x22 returned 0 after 141 usecs
calling vsyscall_init+0x0/0x6c @ 1
initcall vsyscall_init+0x0/0x6c returned 0 after 13 usecs
calling sbf_init+0x0/0xd7 @ 1
initcall sbf_init+0x0/0xd7 returned 0 after 0 usecs
calling i8237A_init_sysfs+0x0/0x22 @ 1
initcall i8237A_init_sysfs+0x0/0x22 returned 0 after 106 usecs
calling add_rtc_cmos+0x0/0xa4 @ 1
platform rtc_cmos: registered platform RTC device (no PNP device found)
initcall add_rtc_cmos+0x0/0xa4 returned 0 after 24157 usecs
calling cache_sysfs_init+0x0/0x59 @ 1
initcall cache_sysfs_init+0x0/0x59 returned 0 after 933 usecs
calling mcheck_init_device+0x0/0xf2 @ 1
initcall mcheck_init_device+0x0/0xf2 returned 0 after 360 usecs
calling threshold_init_device+0x0/0x44 @ 1
initcall threshold_init_device+0x0/0x44 returned 0 after 1 usecs
calling thermal_throttle_init_device+0x0/0x89 @ 1
initcall thermal_throttle_init_device+0x0/0x89 returned 0 after 0 usecs
calling msr_init+0x0/0x10b @ 1
initcall msr_init+0x0/0x10b returned 0 after 306 usecs
calling cpuid_init+0x0/0x10b @ 1
initcall cpuid_init+0x0/0x10b returned 0 after 293 usecs
calling ioapic_init_sysfs+0x0/0x99 @ 1
initcall ioapic_init_sysfs+0x0/0x99 returned 0 after 155 usecs
calling add_pcspkr+0x0/0x28 @ 1
initcall add_pcspkr+0x0/0x28 returned 0 after 62 usecs
calling audit_classes_init+0x0/0xaf @ 1
initcall audit_classes_init+0x0/0xaf returned 0 after 6 usecs
calling init_vdso_vars+0x0/0x19d @ 1
initcall init_vdso_vars+0x0/0x19d returned 0 after 15 usecs
calling ia32_binfmt_init+0x0/0x14 @ 1
initcall ia32_binfmt_init+0x0/0x14 returned 0 after 1 usecs
calling sysenter_setup+0x0/0x2cc @ 1
initcall sysenter_setup+0x0/0x2cc returned 0 after 5 usecs
calling init_sched_debug_procfs+0x0/0x29 @ 1
initcall init_sched_debug_procfs+0x0/0x29 returned 0 after 7 usecs
calling proc_schedstat_init+0x0/0x1f @ 1
initcall proc_schedstat_init+0x0/0x1f returned 0 after 1 usecs
calling proc_execdomains_init+0x0/0x22 @ 1
initcall proc_execdomains_init+0x0/0x22 returned 0 after 1 usecs
calling ioresources_init+0x0/0x36 @ 1
initcall ioresources_init+0x0/0x36 returned 0 after 3 usecs
calling uid_cache_init+0x0/0x6e @ 1
initcall uid_cache_init+0x0/0x6e returned 0 after 8 usecs
calling init_posix_timers+0x0/0x1b5 @ 1
initcall init_posix_timers+0x0/0x1b5 returned 0 after 2 usecs
calling init_posix_cpu_timers+0x0/0x101 @ 1
initcall init_posix_cpu_timers+0x0/0x101 returned 0 after 1 usecs
calling nsproxy_cache_init+0x0/0x2d @ 1
initcall nsproxy_cache_init+0x0/0x2d returned 0 after 1 usecs
calling create_proc_profile+0x0/0x236 @ 1
initcall create_proc_profile+0x0/0x236 returned 0 after 0 usecs
calling timekeeping_init_device+0x0/0x22 @ 1
initcall timekeeping_init_device+0x0/0x22 returned 0 after 107 usecs
calling init_clocksource_sysfs+0x0/0x50 @ 1
initcall init_clocksource_sysfs+0x0/0x50 returned 0 after 105 usecs
calling init_timer_list_procfs+0x0/0x2c @ 1
initcall init_timer_list_procfs+0x0/0x2c returned 0 after 2 usecs
calling init_tstats_procfs+0x0/0x2c @ 1
initcall init_tstats_procfs+0x0/0x2c returned 0 after 2 usecs
calling futex_init+0x0/0x63 @ 1
initcall futex_init+0x0/0x63 returned 0 after 10 usecs
calling proc_dma_init+0x0/0x22 @ 1
initcall proc_dma_init+0x0/0x22 returned 0 after 1 usecs
calling proc_modules_init+0x0/0x22 @ 1
initcall proc_modules_init+0x0/0x22 returned 0 after 1 usecs
calling kallsyms_init+0x0/0x25 @ 1
initcall kallsyms_init+0x0/0x25 returned 0 after 1 usecs
calling snapshot_device_init+0x0/0x12 @ 1
initcall snapshot_device_init+0x0/0x12 returned 0 after 61 usecs
calling crash_save_vmcoreinfo_init+0x0/0x46d @ 1
initcall crash_save_vmcoreinfo_init+0x0/0x46d returned 0 after 22 usecs
calling crash_notes_memory_init+0x0/0x36 @ 1
initcall crash_notes_memory_init+0x0/0x36 returned 0 after 6 usecs
calling pid_namespaces_init+0x0/0x2d @ 1
initcall pid_namespaces_init+0x0/0x2d returned 0 after 6 usecs
calling ikconfig_init+0x0/0x39 @ 1
initcall ikconfig_init+0x0/0x39 returned 0 after 2 usecs
calling audit_init+0x0/0x133 @ 1
audit: initializing netlink socket (disabled)
type=2000 audit(1268069973.149:1): initialized
initcall audit_init+0x0/0x133 returned 0 after 38868 usecs
calling audit_tree_init+0x0/0x49 @ 1
initcall audit_tree_init+0x0/0x49 returned 0 after 2 usecs
calling init_kprobes+0x0/0x182 @ 1
initcall init_kprobes+0x0/0x182 returned 0 after 16016 usecs
calling hung_task_init+0x0/0x53 @ 1
initcall hung_task_init+0x0/0x53 returned 0 after 38 usecs
calling utsname_sysctl_init+0x0/0x14 @ 1
initcall utsname_sysctl_init+0x0/0x14 returned 0 after 2 usecs
calling init_tracepoints+0x0/0x12 @ 1
initcall init_tracepoints+0x0/0x12 returned 0 after 0 usecs
calling init_lstats_procfs+0x0/0x25 @ 1
initcall init_lstats_procfs+0x0/0x25 returned 0 after 3 usecs
calling init_events+0x0/0x5f @ 1
initcall init_events+0x0/0x5f returned 0 after 2 usecs
calling init_sched_switch_trace+0x0/0x12 @ 1
initcall init_sched_switch_trace+0x0/0x12 returned 0 after 2 usecs
calling init_stack_trace+0x0/0x12 @ 1
initcall init_stack_trace+0x0/0x12 returned 0 after 1 usecs
calling init_irqsoff_tracer+0x0/0x14 @ 1
initcall init_irqsoff_tracer+0x0/0x14 returned 0 after 0 usecs
calling init_wakeup_tracer+0x0/0x22 @ 1
initcall init_wakeup_tracer+0x0/0x22 returned 0 after 1 usecs
calling init_blk_tracer+0x0/0x57 @ 1
initcall init_blk_tracer+0x0/0x57 returned 0 after 1 usecs
calling perf_event_sysfs_init+0x0/0x19 @ 1
initcall perf_event_sysfs_init+0x0/0x19 returned 0 after 8 usecs
calling init_per_zone_wmark_min+0x0/0x70 @ 1
initcall init_per_zone_wmark_min+0x0/0x70 returned 0 after 486 usecs
calling kswapd_init+0x0/0x4d @ 1
initcall kswapd_init+0x0/0x4d returned 0 after 77 usecs
calling setup_vmstat+0x0/0xae @ 1
initcall setup_vmstat+0x0/0xae returned 0 after 13 usecs
calling mm_sysfs_init+0x0/0x29 @ 1
initcall mm_sysfs_init+0x0/0x29 returned 0 after 4 usecs
calling proc_vmalloc_init+0x0/0x25 @ 1
initcall proc_vmalloc_init+0x0/0x25 returned 0 after 2 usecs
calling procswaps_init+0x0/0x22 @ 1
initcall procswaps_init+0x0/0x22 returned 0 after 1 usecs
calling hugetlb_init+0x0/0x329 @ 1
HugeTLB registered 2 MB page size, pre-allocated 0 pages
initcall hugetlb_init+0x0/0x329 returned 0 after 27417 usecs
calling slab_proc_init+0x0/0x25 @ 1
initcall slab_proc_init+0x0/0x25 returned 0 after 2 usecs
calling slab_sysfs_init+0x0/0xf0 @ 1
initcall slab_sysfs_init+0x0/0xf0 returned 0 after 3458 usecs
calling fasync_init+0x0/0x2a @ 1
initcall fasync_init+0x0/0x2a returned 0 after 4 usecs
calling proc_filesystems_init+0x0/0x22 @ 1
initcall proc_filesystems_init+0x0/0x22 returned 0 after 3 usecs
calling dnotify_init+0x0/0x80 @ 1
initcall dnotify_init+0x0/0x80 returned 0 after 8 usecs
calling inotify_setup+0x0/0x12 @ 1
initcall inotify_setup+0x0/0x12 returned 0 after 0 usecs
calling inotify_user_setup+0x0/0x70 @ 1
initcall inotify_user_setup+0x0/0x70 returned 0 after 6 usecs
calling aio_setup+0x0/0x9e @ 1
initcall aio_setup+0x0/0x9e returned 0 after 141 usecs
calling proc_locks_init+0x0/0x22 @ 1
initcall proc_locks_init+0x0/0x22 returned 0 after 2 usecs
calling init_sys32_ioctl+0x0/0x28 @ 1
initcall init_sys32_ioctl+0x0/0x28 returned 0 after 73 usecs
calling init_mbcache+0x0/0x14 @ 1
initcall init_mbcache+0x0/0x14 returned 0 after 1 usecs
calling dquot_init+0x0/0xe0 @ 1
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
initcall dquot_init+0x0/0xe0 returned 0 after 43189 usecs
calling init_v2_quota_format+0x0/0x22 @ 1
initcall init_v2_quota_format+0x0/0x22 returned 0 after 1 usecs
calling quota_init+0x0/0x26 @ 1
initcall quota_init+0x0/0x26 returned 0 after 29 usecs
calling proc_cmdline_init+0x0/0x22 @ 1
initcall proc_cmdline_init+0x0/0x22 returned 0 after 13 usecs
calling proc_cpuinfo_init+0x0/0x22 @ 1
initcall proc_cpuinfo_init+0x0/0x22 returned 0 after 2 usecs
calling proc_devices_init+0x0/0x22 @ 1
initcall proc_devices_init+0x0/0x22 returned 0 after 1 usecs
calling proc_interrupts_init+0x0/0x22 @ 1
initcall proc_interrupts_init+0x0/0x22 returned 0 after 1 usecs
calling proc_loadavg_init+0x0/0x22 @ 1
initcall proc_loadavg_init+0x0/0x22 returned 0 after 1 usecs
calling proc_meminfo_init+0x0/0x22 @ 1
initcall proc_meminfo_init+0x0/0x22 returned 0 after 1 usecs
calling proc_stat_init+0x0/0x22 @ 1
initcall proc_stat_init+0x0/0x22 returned 0 after 1 usecs
calling proc_uptime_init+0x0/0x22 @ 1
initcall proc_uptime_init+0x0/0x22 returned 0 after 1 usecs
calling proc_version_init+0x0/0x22 @ 1
initcall proc_version_init+0x0/0x22 returned 0 after 2 usecs
calling proc_softirqs_init+0x0/0x22 @ 1
initcall proc_softirqs_init+0x0/0x22 returned 0 after 1 usecs
calling proc_kcore_init+0x0/0xa9 @ 1
initcall proc_kcore_init+0x0/0xa9 returned 0 after 8 usecs
calling vmcore_init+0x0/0x8e2 @ 1
initcall vmcore_init+0x0/0x8e2 returned 0 after 0 usecs
calling proc_kmsg_init+0x0/0x25 @ 1
initcall proc_kmsg_init+0x0/0x25 returned 0 after 2 usecs
calling proc_page_init+0x0/0x3c @ 1
initcall proc_page_init+0x0/0x3c returned 0 after 3 usecs
calling init_devpts_fs+0x0/0x4d @ 1
initcall init_devpts_fs+0x0/0x4d returned 0 after 18 usecs
calling init_ext3_fs+0x0/0x6b @ 1
initcall init_ext3_fs+0x0/0x6b returned 0 after 158 usecs
calling journal_init+0x0/0x99 @ 1
initcall journal_init+0x0/0x99 returned 0 after 297 usecs
calling init_ramfs_fs+0x0/0x12 @ 1
initcall init_ramfs_fs+0x0/0x12 returned 0 after 1 usecs
calling init_hugetlbfs_fs+0x0/0x98 @ 1
initcall init_hugetlbfs_fs+0x0/0x98 returned 0 after 92 usecs
calling init_iso9660_fs+0x0/0x6c @ 1
initcall init_iso9660_fs+0x0/0x6c returned 0 after 95 usecs
calling init_nls_cp437+0x0/0x12 @ 1
initcall init_nls_cp437+0x0/0x12 returned 0 after 1 usecs
calling init_nls_ascii+0x0/0x12 @ 1
initcall init_nls_ascii+0x0/0x12 returned 0 after 0 usecs
calling ipc_init+0x0/0x23 @ 1
msgmni has been set to 16001
initcall ipc_init+0x0/0x23 returned 0 after 14659 usecs
calling ipc_sysctl_init+0x0/0x14 @ 1
initcall ipc_sysctl_init+0x0/0x14 returned 0 after 1 usecs
calling init_mqueue_fs+0x0/0xb4 @ 1
initcall init_mqueue_fs+0x0/0xb4 returned 0 after 97 usecs
calling key_proc_init+0x0/0x53 @ 1
initcall key_proc_init+0x0/0x53 returned 0 after 4 usecs
calling selinux_nf_ip_init+0x0/0x60 @ 1
initcall selinux_nf_ip_init+0x0/0x60 returned 0 after 0 usecs
calling init_sel_fs+0x0/0x69 @ 1
initcall init_sel_fs+0x0/0x69 returned 0 after 0 usecs
calling selnl_init+0x0/0x4d @ 1
initcall selnl_init+0x0/0x4d returned 0 after 5 usecs
calling sel_netif_init+0x0/0x66 @ 1
initcall sel_netif_init+0x0/0x66 returned 0 after 0 usecs
calling sel_netnode_init+0x0/0x72 @ 1
initcall sel_netnode_init+0x0/0x72 returned 0 after 0 usecs
calling sel_netport_init+0x0/0x72 @ 1
initcall sel_netport_init+0x0/0x72 returned 0 after 0 usecs
calling aurule_init+0x0/0x37 @ 1
initcall aurule_init+0x0/0x37 returned 0 after 1 usecs
calling crypto_wq_init+0x0/0x2e @ 1
initcall crypto_wq_init+0x0/0x2e returned 0 after 125 usecs
calling crypto_algapi_init+0x0/0xd @ 1
initcall crypto_algapi_init+0x0/0xd returned 0 after 2 usecs
calling skcipher_module_init+0x0/0x34 @ 1
initcall skcipher_module_init+0x0/0x34 returned 0 after 0 usecs
calling chainiv_module_init+0x0/0x12 @ 1
initcall chainiv_module_init+0x0/0x12 returned 0 after 2 usecs
calling eseqiv_module_init+0x0/0x12 @ 1
initcall eseqiv_module_init+0x0/0x12 returned 0 after 0 usecs
calling hmac_module_init+0x0/0x12 @ 1
initcall hmac_module_init+0x0/0x12 returned 0 after 0 usecs
calling md5_mod_init+0x0/0x12 @ 1
initcall md5_mod_init+0x0/0x12 returned 0 after 78 usecs
calling sha1_generic_mod_init+0x0/0x12 @ 1
initcall sha1_generic_mod_init+0x0/0x12 returned 0 after 51 usecs
calling krng_mod_init+0x0/0x12 @ 1
alg: No test for stdrng (krng)
initcall krng_mod_init+0x0/0x12 returned 0 after 14957 usecs
calling proc_genhd_init+0x0/0x36 @ 1
initcall proc_genhd_init+0x0/0x36 returned 0 after 3 usecs
calling bsg_init+0x0/0x12e @ 1
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
initcall bsg_init+0x0/0x12e returned 0 after 33237 usecs
calling noop_init+0x0/0x14 @ 1
io scheduler noop registered
initcall noop_init+0x0/0x14 returned 0 after 13683 usecs
calling deadline_init+0x0/0x14 @ 1
io scheduler deadline registered
initcall deadline_init+0x0/0x14 returned 0 after 15511 usecs
calling cfq_init+0x0/0x94 @ 1
io scheduler cfq registered (default)
initcall cfq_init+0x0/0x94 returned 0 after 19511 usecs
calling percpu_counter_startup+0x0/0x19 @ 1
initcall percpu_counter_startup+0x0/0x19 returned 0 after 2 usecs
calling pci_proc_init+0x0/0x6a @ 1
initcall pci_proc_init+0x0/0x6a returned 0 after 97 usecs
calling pcie_portdrv_init+0x0/0x58 @ 1
pcieport 0000:00:0b.0: setting latency timer to 64
pcieport 0000:00:0b.0: irq 62 for MSI/MSI-X
pcieport 0000:00:0c.0: setting latency timer to 64
pcieport 0000:00:0c.0: irq 63 for MSI/MSI-X
pcieport 0000:00:0d.0: setting latency timer to 64
pcieport 0000:00:0d.0: irq 64 for MSI/MSI-X
pcieport 0000:00:0e.0: setting latency timer to 64
pcieport 0000:00:0e.0: irq 65 for MSI/MSI-X
pcieport 0000:40:0c.0: setting latency timer to 64
pcieport 0000:40:0c.0: irq 66 for MSI/MSI-X
pcieport 0000:40:0d.0: setting latency timer to 64
pcieport 0000:40:0d.0: irq 67 for MSI/MSI-X
pcieport 0000:40:0e.0: setting latency timer to 64
pcieport 0000:40:0e.0: irq 68 for MSI/MSI-X
initcall pcie_portdrv_init+0x0/0x58 returned 0 after 308716 usecs
calling aer_service_init+0x0/0x2b @ 1
aer 0000:00:0b.0:pcie02: AER service couldn't init device: no _OSC support
aer 0000:00:0c.0:pcie02: AER service couldn't init device: no _OSC support
aer 0000:00:0d.0:pcie02: AER service couldn't init device: no _OSC support
aer 0000:00:0e.0:pcie02: AER service couldn't init device: no _OSC support
aer 0000:40:0c.0:pcie02: AER service couldn't init device: no _OSC support
aer 0000:40:0d.0:pcie02: AER service couldn't init device: no _OSC support
aer 0000:40:0e.0:pcie02: AER service couldn't init device: no _OSC support
initcall aer_service_init+0x0/0x2b returned 0 after 259826 usecs
calling ioapic_init+0x0/0x1b @ 1
initcall ioapic_init+0x0/0x1b returned 0 after 60 usecs
calling pci_hotplug_init+0x0/0x1d @ 1
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
initcall pci_hotplug_init+0x0/0x1d returned 0 after 24101 usecs
calling acpiphp_init+0x0/0x5f @ 1
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
initcall acpiphp_init+0x0/0x5f returned -19 after 29492 usecs
calling fb_console_init+0x0/0x12a @ 1
initcall fb_console_init+0x0/0x12a returned 0 after 87 usecs
calling genericbl_init+0x0/0x12 @ 1
initcall genericbl_init+0x0/0x12 returned 0 after 59 usecs
calling xenfb_init+0x0/0x44 @ 1
initcall xenfb_init+0x0/0x44 returned -19 after 0 usecs
calling vesafb_init+0x0/0x235 @ 1
initcall vesafb_init+0x0/0x235 returned 0 after 119 usecs
calling efifb_init+0x0/0x1f2 @ 1
initcall efifb_init+0x0/0x1f2 returned -19 after 3 usecs
calling acpi_reserve_resources+0x0/0xeb @ 1
initcall acpi_reserve_resources+0x0/0xeb returned 0 after 3 usecs
calling irqrouter_init_sysfs+0x0/0x38 @ 1
initcall irqrouter_init_sysfs+0x0/0x38 returned 0 after 104 usecs
calling acpi_button_init+0x0/0x56 @ 1
input: Power Button as /class/input/input0
ACPI: Power Button [PWRF]
initcall acpi_button_init+0x0/0x56 returned 0 after 35233 usecs
calling acpi_fan_init+0x0/0x56 @ 1
initcall acpi_fan_init+0x0/0x56 returned 0 after 60 usecs
calling acpi_processor_init+0x0/0x10a @ 1
initcall acpi_processor_init+0x0/0x10a returned 0 after 645 usecs
calling acpi_container_init+0x0/0x4a @ 1
initcall acpi_container_init+0x0/0x4a returned 0 after 998 usecs
calling acpi_thermal_init+0x0/0x7b @ 1
initcall acpi_thermal_init+0x0/0x7b returned 0 after 74 usecs
calling evtchn_init+0x0/0x61 @ 1
initcall evtchn_init+0x0/0x61 returned -19 after 0 usecs
calling xenfs_init+0x0/0x2d @ 1
XENFS: not registering filesystem on non-xen platform
initcall xenfs_init+0x0/0x2d returned 0 after 25967 usecs
calling hypervisor_subsys_init+0x0/0x25 @ 1
initcall hypervisor_subsys_init+0x0/0x25 returned -19 after 0 usecs
calling hyper_sysfs_init+0x0/0xb3 @ 1
initcall hyper_sysfs_init+0x0/0xb3 returned -19 after 0 usecs
calling rand_initialize+0x0/0x2c @ 1
initcall rand_initialize+0x0/0x2c returned 0 after 15 usecs
calling tty_init+0x0/0xf5 @ 1
initcall tty_init+0x0/0xf5 returned 0 after 4223 usecs
calling pty_init+0x0/0x284 @ 1
initcall pty_init+0x0/0x284 returned 0 after 84 usecs
calling sysrq_init+0x0/0x25 @ 1
initcall sysrq_init+0x0/0x25 returned 0 after 120 usecs
calling xen_init+0x0/0x78 @ 1
initcall xen_init+0x0/0x78 returned -19 after 0 usecs
calling raw_init+0x0/0xe5 @ 1
initcall raw_init+0x0/0xe5 returned 0 after 122 usecs
calling hpet_init+0x0/0x6a @ 1
initcall hpet_init+0x0/0x6a returned 0 after 197 usecs
calling nvram_init+0x0/0x82 @ 1
Non-volatile memory driver v1.3
initcall nvram_init+0x0/0x82 returned 0 after 16595 usecs
calling mod_init+0x0/0x4d @ 1
initcall mod_init+0x0/0x4d returned -19 after 0 usecs
calling agp_init+0x0/0x26 @ 1
Linux agpgart interface v0.103
initcall agp_init+0x0/0x26 returned 0 after 15216 usecs
calling agp_amd64_mod_init+0x0/0x22 @ 1
initcall agp_amd64_mod_init+0x0/0x22 returned -19 after 0 usecs
calling agp_intel_init+0x0/0x29 @ 1
initcall agp_intel_init+0x0/0x29 returned 0 after 78 usecs
calling agp_sis_init+0x0/0x29 @ 1
initcall agp_sis_init+0x0/0x29 returned 0 after 65 usecs
calling agp_via_init+0x0/0x29 @ 1
initcall agp_via_init+0x0/0x29 returned 0 after 66 usecs
calling drm_core_init+0x0/0x124 @ 1
[drm] Initialized drm 1.1.0 20060810
initcall drm_core_init+0x0/0x124 returned 0 after 18582 usecs
calling cn_proc_init+0x0/0x3d @ 1
initcall cn_proc_init+0x0/0x3d returned 0 after 2 usecs
calling serial8250_init+0x0/0x161 @ 1
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
async_waiting @ 1
async_continuing @ 1 after 0 usec
async_waiting @ 1
async_continuing @ 1 after 0 usec
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
async_waiting @ 1
async_continuing @ 1 after 0 usec
async_waiting @ 1
async_continuing @ 1 after 0 usec
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
initcall serial8250_init+0x0/0x161 returned 0 after 643832 usecs
calling serial8250_pnp_init+0x0/0x12 @ 1
00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
initcall serial8250_pnp_init+0x0/0x12 returned 0 after 2698 usecs
calling serial8250_pci_init+0x0/0x1b @ 1
initcall serial8250_pci_init+0x0/0x1b returned 0 after 117 usecs
calling init_kgdboc+0x0/0x16 @ 1
initcall init_kgdboc+0x0/0x16 returned 0 after 0 usecs
calling topology_sysfs_init+0x0/0x4e @ 1
initcall topology_sysfs_init+0x0/0x4e returned 0 after 17 usecs
calling brd_init+0x0/0x160 @ 1
brd: module loaded
initcall brd_init+0x0/0x160 returned 0 after 11946 usecs
calling loop_init+0x0/0x189 @ 1
loop: module loaded
initcall loop_init+0x0/0x189 returned 0 after 3523 usecs
calling init_kgdbts+0x0/0x16 @ 1
initcall init_kgdbts+0x0/0x16 returned 0 after 1 usecs
calling mac_hid_init+0x0/0x22 @ 1
initcall mac_hid_init+0x0/0x22 returned 0 after 3 usecs
calling scsi_dh_init+0x0/0x3f @ 1
initcall scsi_dh_init+0x0/0x3f returned 0 after 1 usecs
calling init_sd+0x0/0x181 @ 1
initcall init_sd+0x0/0x181 returned 0 after 126 usecs
calling init_sr+0x0/0x49 @ 1
initcall init_sr+0x0/0x49 returned 0 after 56 usecs
calling init_sg+0x0/0x122 @ 1
initcall init_sg+0x0/0x122 returned 0 after 68 usecs
calling ahci_init+0x0/0x1b @ 1
initcall ahci_init+0x0/0x1b returned 0 after 111 usecs
calling bnx2_init+0x0/0x1b @ 1
bnx2: Broadcom NetXtreme II Gigabit Ethernet Driver bnx2 v2.0.8 (Feb 15, 2010)
ACPI: PCI Interrupt Link [LNKX] enabled at IRQ 17
bnx2 0000:03:00.0: PCI INT A -> Link[LNKX] -> GSI 17 (level, high) -> IRQ 17
bnx2 0000:03:00.0: firmware: using built-in firmware bnx2/bnx2-mips-06-5.0.0.j6.fw
bnx2 0000:03:00.0: firmware: using built-in firmware bnx2/bnx2-rv2p-06-5.0.0.j3.fw
bnx2 0000:03:00.0: eth0: Broadcom NetXtreme II BCM5708 1000Base-SX (B2) PCI-X 64-bit 133MHz found at mem f8000000, IRQ 17, node addr 00:18:fe:35:26:f6
ACPI: PCI Interrupt Link [LNKW] enabled at IRQ 16
bnx2 0000:05:00.0: PCI INT A -> Link[LNKW] -> GSI 16 (level, high) -> IRQ 16
bnx2 0000:05:00.0: firmware: using built-in firmware bnx2/bnx2-mips-06-5.0.0.j6.fw
bnx2 0000:05:00.0: firmware: using built-in firmware bnx2/bnx2-rv2p-06-5.0.0.j3.fw
bnx2 0000:05:00.0: eth1: Broadcom NetXtreme II BCM5708 1000Base-SX (B2) PCI-X 64-bit 133MHz found at mem fa000000, IRQ 16, node addr 00:18:fe:35:26:f4
initcall bnx2_init+0x0/0x1b returned 0 after 434831 usecs
calling net_olddevs_init+0x0/0xa0 @ 1
initcall net_olddevs_init+0x0/0xa0 returned 0 after 5 usecs
calling init_netconsole+0x0/0x1dd @ 1
netconsole: local port 56816
netconsole: local IP 139.185.50.77
netconsole: interface eth0
netconsole: remote port 56816
netconsole: remote IP 139.185.50.76
netconsole: remote ethernet address 00:18:fe:34:1c:3d
netconsole: device eth0 not up yet, forcing it
bnx2 0000:03:00.0: irq 69 for MSI/MSI-X
bnx2 0000:03:00.0: eth0: using MSI
bnx2 0000:03:00.0: eth0: NIC SerDes Link is Up, 1000 Mbps full duplex
netconsole: carrier detect appears untrustworthy, waiting 4 seconds
, receive & transmit flow control ON
bnx2 0000:03:00.0: eth0: NIC SerDes Link is Down
bnx2 0000:03:00.0: eth0: NIC SerDes Link is Up, 1000 Mbps full duplex, receive & transmit flow control ON
Clocksource tsc unstable (delta = 4398045025043 ns)
console [netcon0] enabled
netconsole: network logging started
initcall init_netconsole+0x0/0x1dd returned 0 after 32370847 usecs
calling cdrom_init+0x0/0xd @ 1
initcall cdrom_init+0x0/0xd returned 0 after 19 usecs
calling mon_init+0x0/0x103 @ 1
initcall mon_init+0x0/0x103 returned 0 after 201 usecs
calling i8042_init+0x0/0x3f9 @ 1
PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
initcall i8042_init+0x0/0x3f9 returned 0 after 58352 usecs
calling serport_init+0x0/0x34 @ 1
initcall serport_init+0x0/0x34 returned 0 after 0 usecs
calling mousedev_init+0x0/0x61 @ 1
mice: PS/2 mouse device common for all mice
initcall mousedev_init+0x0/0x61 returned 0 after 21491 usecs
calling evdev_init+0x0/0x12 @ 1
initcall evdev_init+0x0/0x12 returned 0 after 72 usecs
calling atkbd_init+0x0/0x27 @ 1
initcall atkbd_init+0x0/0x27 returned 0 after 67 usecs
calling psmouse_init+0x0/0x7a @ 1
initcall psmouse_init+0x0/0x7a returned 0 after 117 usecs
calling xenkbd_init+0x0/0x44 @ 1
initcall xenkbd_init+0x0/0x44 returned -19 after 0 usecs
calling cmos_init+0x0/0x6d @ 1
rtc_cmos rtc_cmos: RTC can wake from S4
rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
initcall cmos_init+0x0/0x6d returned 0 after 77274 usecs
calling dm_init+0x0/0x49 @ 1
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com
initcall dm_init+0x0/0x49 returned 0 after 57655 usecs
calling cpufreq_gov_powersave_init+0x0/0x12 @ 1
initcall cpufreq_gov_powersave_init+0x0/0x12 returned 0 after 1 usecs
calling cpufreq_gov_userspace_init+0x0/0x12 @ 1
initcall cpufreq_gov_userspace_init+0x0/0x12 returned 0 after 0 usecs
calling cpufreq_gov_dbs_init+0x0/0x64 @ 1
initcall cpufreq_gov_dbs_init+0x0/0x64 returned 0 after 124 usecs
calling init_ladder+0x0/0x12 @ 1
cpuidle: using governor ladder
initcall init_ladder+0x0/0x12 returned 0 after 14217 usecs
calling init_menu+0x0/0x12 @ 1
cpuidle: using governor menu
initcall init_menu+0x0/0x12 returned 0 after 13709 usecs
calling efivars_init+0x0/0x1f9 @ 1
initcall efivars_init+0x0/0x1f9 returned -19 after 0 usecs
calling hid_init+0x0/0x66 @ 1
initcall hid_init+0x0/0x66 returned 0 after 118 usecs
calling a4_init+0x0/0x1b @ 1
initcall a4_init+0x0/0x1b returned 0 after 51 usecs
calling apple_init+0x0/0x38 @ 1
initcall apple_init+0x0/0x38 returned 0 after 52 usecs
calling belkin_init+0x0/0x1b @ 1
initcall belkin_init+0x0/0x1b returned 0 after 48 usecs
calling ch_init+0x0/0x1b @ 1
initcall ch_init+0x0/0x1b returned 0 after 48 usecs
calling ch_init+0x0/0x1b @ 1
initcall ch_init+0x0/0x1b returned 0 after 48 usecs
calling cp_init+0x0/0x1b @ 1
initcall cp_init+0x0/0x1b returned 0 after 48 usecs
calling dr_init+0x0/0x1b @ 1
initcall dr_init+0x0/0x1b returned 0 after 49 usecs
calling ez_init+0x0/0x1b @ 1
initcall ez_init+0x0/0x1b returned 0 after 48 usecs
calling gyration_init+0x0/0x1b @ 1
initcall gyration_init+0x0/0x1b returned 0 after 52 usecs
calling ks_init+0x0/0x1b @ 1
initcall ks_init+0x0/0x1b returned 0 after 49 usecs
calling kye_init+0x0/0x1b @ 1
initcall kye_init+0x0/0x1b returned 0 after 49 usecs
calling lg_init+0x0/0x1b @ 1
initcall lg_init+0x0/0x1b returned 0 after 76 usecs
calling ms_init+0x0/0x1b @ 1
initcall ms_init+0x0/0x1b returned 0 after 61 usecs
calling mr_init+0x0/0x1b @ 1
initcall mr_init+0x0/0x1b returned 0 after 50 usecs
calling ntrig_init+0x0/0x1b @ 1
initcall ntrig_init+0x0/0x1b returned 0 after 48 usecs
calling ortek_init+0x0/0x1b @ 1
initcall ortek_init+0x0/0x1b returned 0 after 48 usecs
calling pl_init+0x0/0x1b @ 1
initcall pl_init+0x0/0x1b returned 0 after 49 usecs
calling pl_init+0x0/0x1b @ 1
initcall pl_init+0x0/0x1b returned 0 after 48 usecs
calling samsung_init+0x0/0x1b @ 1
initcall samsung_init+0x0/0x1b returned 0 after 49 usecs
calling sjoy_init+0x0/0x1b @ 1
initcall sjoy_init+0x0/0x1b returned 0 after 49 usecs
calling sony_init+0x0/0x1b @ 1
initcall sony_init+0x0/0x1b returned 0 after 57 usecs
calling sp_init+0x0/0x1b @ 1
initcall sp_init+0x0/0x1b returned 0 after 49 usecs
calling ga_init+0x0/0x1b @ 1
initcall ga_init+0x0/0x1b returned 0 after 49 usecs
calling tm_init+0x0/0x1b @ 1
initcall tm_init+0x0/0x1b returned 0 after 48 usecs
calling ts_init+0x0/0x1b @ 1
initcall ts_init+0x0/0x1b returned 0 after 49 usecs
calling twinhan_init+0x0/0x1b @ 1
initcall twinhan_init+0x0/0x1b returned 0 after 49 usecs
calling zp_init+0x0/0x1b @ 1
initcall zp_init+0x0/0x1b returned 0 after 49 usecs
calling hid_init+0x0/0xc7 @ 1
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
initcall hid_init+0x0/0xc7 returned 0 after 50503 usecs
calling flow_cache_init+0x0/0x187 @ 1
initcall flow_cache_init+0x0/0x187 returned 0 after 25 usecs
calling llc_init+0x0/0x20 @ 1
initcall llc_init+0x0/0x20 returned 0 after 1 usecs
calling snap_init+0x0/0x38 @ 1
initcall snap_init+0x0/0x38 returned 0 after 2 usecs
calling rif_init+0x0/0x84 @ 1
initcall rif_init+0x0/0x84 returned 0 after 13 usecs
calling blackhole_module_init+0x0/0x12 @ 1
initcall blackhole_module_init+0x0/0x12 returned 0 after 1 usecs
calling nf_conntrack_standalone_init+0x0/0x12 @ 1
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
initcall nf_conntrack_standalone_init+0x0/0x12 returned 0 after 94749 usecs
calling xt_init+0x0/0x129 @ 1
initcall xt_init+0x0/0x129 returned 0 after 11 usecs
calling tcpudp_mt_init+0x0/0x17 @ 1
initcall tcpudp_mt_init+0x0/0x17 returned 0 after 1 usecs
calling conntrack_mt_init+0x0/0x17 @ 1
initcall conntrack_mt_init+0x0/0x17 returned 0 after 1 usecs
calling state_mt_init+0x0/0x17 @ 1
initcall state_mt_init+0x0/0x17 returned 0 after 3 usecs
calling sysctl_ipv4_init+0x0/0x4e @ 1
initcall sysctl_ipv4_init+0x0/0x4e returned 0 after 12 usecs
calling init_syncookies+0x0/0x19 @ 1
initcall init_syncookies+0x0/0x19 returned 0 after 25 usecs
calling ipv4_netfilter_init+0x0/0x12 @ 1
initcall ipv4_netfilter_init+0x0/0x12 returned 0 after 1 usecs
calling nf_conntrack_l3proto_ipv4_init+0x0/0x12d @ 1
initcall nf_conntrack_l3proto_ipv4_init+0x0/0x12d returned 0 after 11 usecs
calling nf_defrag_init+0x0/0x17 @ 1
initcall nf_defrag_init+0x0/0x17 returned 0 after 0 usecs
calling ip_tables_init+0x0/0xaf @ 1
ip_tables: (C) 2000-2006 Netfilter Core Team
initcall ip_tables_init+0x0/0xaf returned 0 after 21691 usecs
calling iptable_filter_init+0x0/0x6f @ 1
initcall iptable_filter_init+0x0/0x6f returned 0 after 16 usecs
calling reject_tg_init+0x0/0x12 @ 1
initcall reject_tg_init+0x0/0x12 returned 0 after 0 usecs
calling cubictcp_register+0x0/0x6e @ 1
TCP cubic registered
initcall cubictcp_register+0x0/0x6e returned 0 after 7141 usecs
calling xfrm_user_init+0x0/0x4d @ 1
Initializing XFRM netlink socket
initcall xfrm_user_init+0x0/0x4d returned 0 after 15745 usecs
calling packet_init+0x0/0x47 @ 1
NET: Registered protocol family 17
initcall packet_init+0x0/0x47 returned 0 after 16582 usecs
calling mcheck_debugfs_init+0x0/0x3b @ 1
initcall mcheck_debugfs_init+0x0/0x3b returned 0 after 5 usecs
calling severities_debugfs_init+0x0/0x3b @ 1
initcall severities_debugfs_init+0x0/0x3b returned 0 after 2 usecs
calling hpet_insert_resource+0x0/0x23 @ 1
initcall hpet_insert_resource+0x0/0x23 returned 0 after 2 usecs
calling update_mp_table+0x0/0x470 @ 1
initcall update_mp_table+0x0/0x470 returned 0 after 0 usecs
calling lapic_insert_resource+0x0/0x40 @ 1
initcall lapic_insert_resource+0x0/0x40 returned 0 after 1 usecs
calling init_lapic_nmi_sysfs+0x0/0x39 @ 1
initcall init_lapic_nmi_sysfs+0x0/0x39 returned 0 after 103 usecs
calling io_apic_bug_finalize+0x0/0x1b @ 1
initcall io_apic_bug_finalize+0x0/0x1b returned 0 after 0 usecs
calling check_early_ioremap_leak+0x0/0x65 @ 1
initcall check_early_ioremap_leak+0x0/0x65 returned 0 after 0 usecs
calling pat_memtype_list_init+0x0/0x32 @ 1
initcall pat_memtype_list_init+0x0/0x32 returned 0 after 13 usecs
calling sched_init_debug+0x0/0x24 @ 1
initcall sched_init_debug+0x0/0x24 returned 0 after 2 usecs
calling init_oops_id+0x0/0x31 @ 1
initcall init_oops_id+0x0/0x31 returned 0 after 2 usecs
calling disable_boot_consoles+0x0/0x45 @ 1
initcall disable_boot_consoles+0x0/0x45 returned 0 after 0 usecs
calling pm_qos_power_init+0x0/0x61 @ 1
initcall pm_qos_power_init+0x0/0x61 returned 0 after 188 usecs
calling software_resume+0x0/0x1ec @ 1
PM: Resume from disk failed.
initcall software_resume+0x0/0x1ec returned -2 after 4565 usecs
initcall software_resume+0x0/0x1ec returned with error code -2
calling debugfs_kprobe_init+0x0/0x89 @ 1
initcall debugfs_kprobe_init+0x0/0x89 returned 0 after 5 usecs
calling taskstats_init+0x0/0x95 @ 1
registered taskstats version 1
initcall taskstats_init+0x0/0x95 returned 0 after 15643 usecs
calling clear_boot_tracer+0x0/0x2d @ 1
initcall clear_boot_tracer+0x0/0x2d returned 0 after 0 usecs
calling max_swapfiles_check+0x0/0x8 @ 1
initcall max_swapfiles_check+0x0/0x8 returned 0 after 0 usecs
calling random32_reseed+0x0/0x92 @ 1
initcall random32_reseed+0x0/0x92 returned 0 after 15 usecs
calling pci_resource_alignment_sysfs_init+0x0/0x19 @ 1
initcall pci_resource_alignment_sysfs_init+0x0/0x19 returned 0 after 2 usecs
calling pci_sysfs_init+0x0/0x4c @ 1
initcall pci_sysfs_init+0x0/0x4c returned 0 after 355 usecs
calling boot_wait_for_devices+0x0/0x19 @ 1
initcall boot_wait_for_devices+0x0/0x19 returned 0 after 0 usecs
calling seqgen_init+0x0/0xf @ 1
initcall seqgen_init+0x0/0xf returned 0 after 9 usecs
calling late_resume_init+0x0/0xf4 @ 1
Magic number: 2:517:693
initcall late_resume_init+0x0/0xf4 returned 0 after 13006 usecs
calling scsi_complete_async_scans+0x0/0xf7 @ 1
initcall scsi_complete_async_scans+0x0/0xf7 returned 0 after 0 usecs
calling memmap_init+0x0/0x3b @ 1
initcall memmap_init+0x0/0x3b returned 0 after 36 usecs
calling pci_mmcfg_late_insert_resources+0x0/0x66 @ 1
initcall pci_mmcfg_late_insert_resources+0x0/0x66 returned 0 after 1 usecs
calling tcp_congestion_default+0x0/0x12 @ 1
initcall tcp_congestion_default+0x0/0x12 returned 0 after 1 usecs
calling initialize_hashrnd+0x0/0x19 @ 1
initcall initialize_hashrnd+0x0/0x19 returned 0 after 3 usecs
async_waiting @ 1
async_continuing @ 1 after 0 usec
Freeing unused kernel memory: 1292k freed
Write protecting the kernel read-only data: 8192k
Freeing unused kernel memory: 232k freed
Freeing unused kernel memory: 1920k freed
calling ehci_hcd_init+0x0/0x76 [ehci_hcd] @ 742
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ACPI: PCI Interrupt Link [LNU2] enabled at IRQ 23
ehci_hcd 0000:00:02.1: PCI INT B -> Link[LNU2] -> GSI 23 (level, high) -> IRQ 23
ehci_hcd 0000:00:02.1: setting latency timer to 64
ehci_hcd 0000:00:02.1: EHCI Host Controller
ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:02.1: debug port 1
ehci_hcd 0000:00:02.1: cache line size of 64 is not supported
ehci_hcd 0000:00:02.1: irq 23, io mem 0xf7dd0000
ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.34-rc1 ehci_hcd
usb usb1: SerialNumber: 0000:00:02.1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 10 ports detected
initcall ehci_hcd_init+0x0/0x76 [ehci_hcd] returned 0 after 361402 usecs
calling ohci_hcd_mod_init+0x0/0x59 [ohci_hcd] @ 744
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ACPI: PCI Interrupt Link [LNU0] enabled at IRQ 22
ohci_hcd 0000:00:02.0: PCI INT A -> Link[LNU0] -> GSI 22 (level, high) -> IRQ 22
ohci_hcd 0000:00:02.0: setting latency timer to 64
ohci_hcd 0000:00:02.0: OHCI Host Controller
ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:02.0: irq 22, io mem 0xf7de0000
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: OHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.34-rc1 ohci_hcd
usb usb2: SerialNumber: 0000:00:02.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 10 ports detected
initcall ohci_hcd_mod_init+0x0/0x59 [ohci_hcd] returned 0 after 323034 usecs
calling uhci_hcd_init+0x0/0xc6 [uhci_hcd] @ 746
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:01:04.4: PCI INT B -> Link[LNKX] -> GSI 17 (level, high) -> IRQ 17
uhci_hcd 0000:01:04.4: UHCI Host Controller
uhci_hcd 0000:01:04.4: new USB bus registered, assigned bus number 3
uhci_hcd 0000:01:04.4: port count misdetected? forcing to 2 ports
uhci_hcd 0000:01:04.4: HCRESET not completed yet!
uhci_hcd 0000:01:04.4: irq 17, io base 0x00001800
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.34-rc1 uhci_hcd
usb usb3: SerialNumber: 0000:01:04.4
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
initcall uhci_hcd_init+0x0/0xc6 [uhci_hcd] returned 0 after 294058 usecs
calling cciss_init+0x0/0xa4 [cciss] @ 748
HP CISS Driver (v 3.6.20)
cciss: using PCI PM to reset controller
usb 3-1: new full speed USB device using uhci_hcd and address 2
usb 3-1: New USB device found, idVendor=03f0, idProduct=1027
usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-1: Product: Virtual Keyboard
usb 3-1: Manufacturer: HP
input: HP Virtual Keyboard as /class/input/input1
generic-usb 0003:03F0:1027.0001: input,hidraw0: USB HID v1.01 Keyboard [HP Virtual Keyboard] on usb-0000:01:04.4-1/input0
input: HP Virtual Keyboard as /class/input/input2
generic-usb 0003:03F0:1027.0002: input,hidraw1: USB HID v1.01 Mouse [HP Virtual Keyboard] on usb-0000:01:04.4-1/input1
usb 3-2: new full speed USB device using uhci_hcd and address 3
hub 3-0:1.0: unable to enumerate USB device on port 2
usb 3-2: new full speed USB device using uhci_hcd and address 4
usb 3-2: New USB device found, idVendor=03f0, idProduct=1327
usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-2: Product: Virtual Hub
usb 3-2: Manufacturer: HP
hub 3-2:1.0: USB hub found
hub 3-2:1.0: 7 ports detected
cciss: controller message 03:00 succeeded
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 54
cciss 0000:42:08.0: PCI INT A -> Link[LNKA] -> GSI 54 (level, high) -> IRQ 54
cciss 0000:42:08.0: irq 70 for MSI/MSI-X
IRQ 70/cciss0: IRQF_DISABLED is not guaranteed on shared IRQs
cciss0: <0x3238> at PCI 0000:42:08.0 IRQ 70 using DAC
cciss/c0d0: p1 p2 p3 p4 < p5 p6 p7 >
cciss/c0d1: p1 p2
initcall cciss_init+0x0/0xa4 [cciss] returned 0 after 2187796 usecs
calling shpcd_init+0x0/0x68 [shpchp] @ 775
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
initcall shpcd_init+0x0/0x68 [shpchp] returned 0 after 41468 usecs
calling scsi_tgt_init+0x0/0x82 [scsi_tgt] @ 781
initcall scsi_tgt_init+0x0/0x82 [scsi_tgt] returned 0 after 202 usecs
calling fc_transport_init+0x0/0x85 [scsi_transport_fc] @ 786
initcall fc_transport_init+0x0/0x85 [scsi_transport_fc] returned 0 after 30 usecs
calling lpfc_init+0x0/0xd3 [lpfc] @ 787
Emulex LightPulse Fibre Channel SCSI driver 8.3.9
Copyright(c) 2004-2009 Emulex. All rights reserved.
ACPI: PCI Interrupt Link [LNKY] enabled at IRQ 18
lpfc 0000:08:00.0: PCI INT A -> Link[LNKY] -> GSI 18 (level, high) -> IRQ 18
lpfc 0000:08:00.0: setting latency timer to 64
scsi0 : on PCI bus 08 device 00 irq 18
lpfc 0000:08:00.0: irq 71 for MSI/MSI-X
ACPI: PCI Interrupt Link [LNKZ] enabled at IRQ 19
lpfc 0000:08:00.1: PCI INT B -> Link[LNKZ] -> GSI 19 (level, high) -> IRQ 19
lpfc 0000:08:00.1: setting latency timer to 64
scsi1 : on PCI bus 08 device 01 irq 19
lpfc 0000:08:00.0: 0:1303 Link Up Event x1 received Data: x1 xf7 x10 x2 x0 x0 0
lpfc 0000:08:00.1: irq 72 for MSI/MSI-X
scsi 0:0:0:0: RAID COMPAQ MSA1000 5.20 PQ: 0 ANSI: 4
scsi 0:0:0:0: Attached scsi generic sg0 type 12
scsi 0:0:0:8: Direct-Access COMPAQ MSA1000 VOLUME 5.20 PQ: 0 ANSI: 4
sd 0:0:0:8: Attached scsi generic sg1 type 0
sd 0:0:0:8: [sda] 2187605616 512-byte logical blocks: (1.12 TB/1.01 TiB)
sd 0:0:0:8: [sda] Write Protect is off
sd 0:0:0:8: [sda] Mode Sense: 83 00 00 08
sd 0:0:0:8: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1
scsi 0:0:1:0: Enclosure HP MSA2212fc J200 PQ: 0 ANSI: 5
sd 0:0:0:8: [sda] Attached SCSI disk
scsi 0:0:1:0: Attached scsi generic sg2 type 13
scsi 0:0:2:0: RAID COMPAQ MSA1000 5.20 PQ: 0 ANSI: 4
scsi 0:0:2:0: Attached scsi generic sg3 type 12
initcall lpfc_init+0x0/0xd3 [lpfc] returned 0 after 4307265 usecs
calling usb_stor_init+0x0/0x4b [usb_storage] @ 801
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
initcall usb_stor_init+0x0/0x4b [usb_storage] returned 0 after 48122 usecs
lpfc 0000:08:00.1: 1:1303 Link Up Event x1 received Data: x1 xf7 x10 x2 x0 x0 0
scsi 1:0:0:0: RAID COMPAQ MSA1000 5.20 PQ: 0 ANSI: 4
scsi 1:0:0:0: Attached scsi generic sg4 type 12
scsi 1:0:0:8: Direct-Access COMPAQ MSA1000 VOLUME 5.20 PQ: 0 ANSI: 4
sd 1:0:0:8: Attached scsi generic sg5 type 0
sd 1:0:0:8: [sdb] 2187605616 512-byte logical blocks: (1.12 TB/1.01 TiB)
scsi 1:0:1:0: Enclosure HP MSA2212fc J200 PQ: 0 ANSI: 5
scsi 1:0:1:0: Attached scsi generic sg6 type 13
scsi 1:0:2:0: RAID COMPAQ MSA1000 5.20 PQ: 0 ANSI: 4
scsi 1:0:2:0: Attached scsi generic sg7 type 12
sd 1:0:0:8: [sdb] Write Protect is off
sd 1:0:0:8: [sdb] Mode Sense: 83 00 00 08
sd 1:0:0:8: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdb: sdb1
sd 1:0:0:8: [sdb] Attached SCSI disk
calling dm_dirty_log_init+0x0/0x59 [dm_log] @ 803
initcall dm_dirty_log_init+0x0/0x59 [dm_log] returned 0 after 1 usecs
kjournald starting. Commit interval 5 seconds
EXT3-fs (cciss/c0d0p3): mounted filesystem with writeback data mode
calling pcspkr_init+0x0/0x12 [pcspkr] @ 1052
input: PC Speaker as /class/input/input3
initcall pcspkr_init+0x0/0x12 [pcspkr] returned 0 after 85596 usecs
calling hwmon_init+0x0/0x112 [hwmon] @ 1069
initcall hwmon_init+0x0/0x112 [hwmon] returned 0 after 399 usecs
calling snd_mem_init+0x0/0x2c [snd_page_alloc] @ 1052
initcall snd_mem_init+0x0/0x2c [snd_page_alloc] returned 0 after 515 usecs
calling k8temp_init+0x0/0x20 [k8temp] @ 1073
k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
calling ipmi_init_msghandler_mod+0x0/0xd [ipmi_msghandler] @ 1463
ipmi message handler version 39.2
initcall ipmi_init_msghandler_mod+0x0/0xd [ipmi_msghandler] returned 0 after 56 usecs
calling init_tis+0x0/0x92 [tpm_tis] @ 1121
initcall init_tis+0x0/0x92 [tpm_tis] returned 0 after 22 usecs
calling init_ipmi_si+0x0/0x793 [ipmi_si] @ 1463
IPMI System Interface driver.
ipmi_si: Trying SMBIOS-specified kcs state machine at i/o address 0xca2, slave address 0x20, irq 0
calling serio_raw_init+0x0/0x20 [serio_raw] @ 1442
initcall serio_raw_init+0x0/0x20 [serio_raw] returned 0 after 22 usecs
ipmi: Found new BMC (man_id: 0x00000b, prod_id: 0x0000, dev_id: 0x11)
IPMI kcs interface initialized
ipmi_si: Trying SPMI-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0
ipmi_si: duplicate interface
calling floppy_module_init+0x0/0xd6d [floppy] @ 1526
Floppy drive(s): fd0 is 1.44M
calling init_ipmi_devintf+0x0/0x106 [ipmi_devintf] @ 1795
ipmi device interface
initcall init_ipmi_devintf+0x0/0x106 [ipmi_devintf] returned 0 after 73 usecs
calling init_soundcore+0x0/0x8b [soundcore] @ 1052
initcall init_soundcore+0x0/0x8b [soundcore] returned 0 after 18 usecs
calling alsa_sound_init+0x0/0x8f [snd] @ 1052
initcall alsa_sound_init+0x0/0x8f [snd] returned 0 after 31 usecs
calling alsa_timer_init+0x0/0x187 [snd_timer] @ 1052
initcall alsa_timer_init+0x0/0x187 [snd_timer] returned 0 after 62 usecs
calling alsa_pcm_init+0x0/0x71 [snd_pcm] @ 1893
initcall alsa_pcm_init+0x0/0x71 [snd_pcm] returned 0 after 7 usecs
calling phy_init+0x0/0x31 [libphy] @ 1891
initcall phy_init+0x0/0x31 [libphy] returned 0 after 49 usecs
calling enclosure_init+0x0/0x19 [enclosure] @ 1934
initcall enclosure_init+0x0/0x19 [enclosure] returned 0 after 14 usecs
calling alsa_mixer_oss_init+0x0/0x3a [snd_mixer_oss] @ 1928
initcall alsa_mixer_oss_init+0x0/0x3a [snd_mixer_oss] returned 0 after 0 usecs
calling alsa_pcm_oss_init+0x0/0xa1 [snd_pcm_oss] @ 1928
initcall alsa_pcm_oss_init+0x0/0xa1 [snd_pcm_oss] returned 0 after 1 usecs
calling alsa_seq_device_init+0x0/0x60 [snd_seq_device] @ 2003
initcall alsa_seq_device_init+0x0/0x60 [snd_seq_device] returned 0 after 6 usecs
calling alsa_seq_init+0x0/0x57 [snd_seq] @ 2009
initcall alsa_seq_init+0x0/0x57 [snd_seq] returned 0 after 499 usecs
calling alsa_seq_midi_event_init+0x0/0x8 [snd_seq_midi_event] @ 2009
initcall alsa_seq_midi_event_init+0x0/0x8 [snd_seq_midi_event] returned 0 after 0 usecs
calling alsa_seq_oss_init+0x0/0x19e [snd_seq_oss] @ 2009
calling ses_init+0x0/0x40 [ses] @ 1934
ses 0:0:1:0: Attached Enclosure device
ses 1:0:1:0: Attached Enclosure device
initcall ses_init+0x0/0x40 [ses] returned 0 after 60 usecs
calling alsa_seq_dummy_init+0x0/0xcd [snd_seq_dummy] @ 2073
initcall alsa_seq_dummy_init+0x0/0xcd [snd_seq_dummy] returned 0 after 12 usecs
calling tg3_init+0x0/0x20 [tg3] @ 1990
initcall alsa_seq_oss_init+0x0/0x19e [snd_seq_oss] returned 0 after 143962 usecs
calling pcsp_init+0x0/0x20 [snd_pcsp] @ 1052
Error: Driver 'pcspkr' is already registered, aborting...
initcall pcsp_init+0x0/0x20 [snd_pcsp] returned -16 after 4 usecs
initcall pcsp_init+0x0/0x20 [snd_pcsp] returned with error code -16
ipmi_si: Trying ACPI-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0
tg3.c:v3.108 (February 17, 2010)
tg3 0000:07:04.0: PCI INT A -> Link[LNKZ] -> GSI 19 (level, high) -> IRQ 19
ipmi_si: duplicate interface
k8temp 0000:00:19.3: Temperature readouts might be wrong - check erratum #141
tg3 0000:07:04.0: eth2: Tigon3 [partno(011276-001) rev 9003] (PCIX:133MHz:64-bit) MAC address 00:18:fe:34:1c:2f
tg3 0000:07:04.0: eth2: attached PHY is 5714 (1000Base-SX Ethernet) (WireSpeed[0])
tg3 0000:07:04.0: eth2: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
tg3 0000:07:04.0: eth2: dma_rwctrl[76148000] dma_mask[40-bit]
tg3 0000:07:04.1: PCI INT B -> Link[LNKW] -> GSI 16 (level, high) -> IRQ 16
initcall k8temp_init+0x0/0x20 [k8temp] returned 0 after 1778901 usecs
tg3 0000:07:04.1: eth3: Tigon3 [partno(011276-001) rev 9003] (PCIX:133MHz:64-bit) MAC address 00:18:fe:34:1c:30
tg3 0000:07:04.1: eth3: attached PHY is 5714 (1000Base-SX Ethernet) (WireSpeed[0])
tg3 0000:07:04.1: eth3: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
tg3 0000:07:04.1: eth3: dma_rwctrl[76148000] dma_mask[40-bit]
initcall tg3_init+0x0/0x20 [tg3] returned 0 after 833093 usecs
ipmi_si: probe of 00:02 failed with error -16
ipmi_si 0000:01:04.6: PCI INT A -> Link[LNKW] -> GSI 16 (level, high) -> IRQ 16
ipmi_si: Trying PCI-specified kcs state machine at mem address 0xf7ef0000, slave address 0x0, irq 16
IRQ 16/ipmi_si: IRQF_DISABLED is not guaranteed on shared IRQs
Using irq 16
ipmi: interfacing existing BMC (man_id: 0x00000b, prod_id: 0x0000, dev_id: 0x11)
IPMI kcs interface initialized
initcall init_ipmi_si+0x0/0x793 [ipmi_si] returned 0 after 2209269 usecs
floppy0: no floppy controllers found
initcall floppy_module_init+0x0/0xd6d [floppy] returned -19 after 2947700 usecs
calling floppy_module_init+0x0/0xd6d [floppy] @ 3147
Floppy drive(s): fd0 is 1.44M
floppy0: no floppy controllers found
initcall floppy_module_init+0x0/0xd6d [floppy] returned -19 after 2959240 usecs
calling parport_default_proc_register+0x0/0x1b [parport] @ 3155
initcall parport_default_proc_register+0x0/0x1b [parport] returned 0 after 9 usecs
calling lp_init_module+0x0/0x274 [lp] @ 3158
calling parport_pc_init+0x0/0x357 [parport_pc] @ 3161
initcall parport_pc_init+0x0/0x357 [parport_pc] returned 0 after 276 usecs
lp: driver loaded but no devices found
initcall lp_init_module+0x0/0x274 [lp] returned 0 after 44770 usecs
calling acpi_ac_init+0x0/0x45 [ac] @ 3191
initcall acpi_ac_init+0x0/0x45 [ac] returned 0 after 59 usecs
calling acpi_battery_init+0x0/0x16 [battery] @ 3197
initcall acpi_battery_init+0x0/0x16 [battery] returned 0 after 5 usecs
calling acpi_pci_slot_init+0x0/0x20 [pci_slot] @ 3206
initcall acpi_pci_slot_init+0x0/0x20 [pci_slot] returned 0 after 354 usecs
calling acpi_smb_hc_init+0x0/0x18 [sbshc] @ 3210
initcall acpi_smb_hc_init+0x0/0x18 [sbshc] returned 0 after 45 usecs
calling acpi_sbs_init+0x0/0x4f [sbs] @ 3216
initcall acpi_sbs_init+0x0/0x4f [sbs] returned 0 after 47 usecs
calling video_output_class_init+0x0/0x19 [output] @ 3219
initcall video_output_class_init+0x0/0x19 [output] returned 0 after 19 usecs
calling acpi_video_init+0x0/0x70 [video] @ 3219
initcall acpi_video_init+0x0/0x70 [video] returned 0 after 96 usecs
md: Autodetecting RAID arrays.
md: Scanned 0 and added 0 devices.
md: autorun ...
md: ... autorun DONE.
calling dm_multipath_init+0x0/0x127 [dm_multipath] @ 3238
device-mapper: multipath: version 1.1.1 loaded
initcall dm_multipath_init+0x0/0x127 [dm_multipath] returned 0 after 15937 usecs
calling dm_mirror_init+0x0/0x79 [dm_mirror] @ 3250
initcall dm_mirror_init+0x0/0x79 [dm_mirror] returned 0 after 66 usecs
EXT3-fs (cciss/c0d0p3): using internal journal
kjournald starting. Commit interval 5 seconds
EXT3-fs (cciss/c0d1p1): using internal journal
EXT3-fs (cciss/c0d1p1): mounted filesystem with writeback data mode
kjournald starting. Commit interval 5 seconds
EXT3-fs (cciss/c0d1p2): using internal journal
EXT3-fs (cciss/c0d1p2): mounted filesystem with writeback data mode
kjournald starting. Commit interval 5 seconds
EXT3-fs (cciss/c0d0p1): using internal journal
EXT3-fs (cciss/c0d0p1): mounted filesystem with writeback data mode
Adding 8008364k swap on /dev/cciss/c0d0p5. Priority:-1 extents:1 across:8008364k
warning: process `kudzu' used the deprecated sysctl system call with 1.23.
calling powernowk8_init+0x0/0xa7 [powernow_k8] @ 3407
powernow-k8: Found 2 Dual-Core AMD Opteron(tm) Processor 8218 processors (4 cpu cores) (version 2.20.00)
powernow-k8: 0 : fid 0x12 (2600 MHz), vid 0x8
powernow-k8: 1 : fid 0x10 (2400 MHz), vid 0xa
powernow-k8: 2 : fid 0xe (2200 MHz), vid 0xc
powernow-k8: 3 : fid 0xc (2000 MHz), vid 0xe
powernow-k8: 4 : fid 0xa (1800 MHz), vid 0x10
powernow-k8: 5 : fid 0x2 (1000 MHz), vid 0x12
powernow-k8: 0 : fid 0x12 (2600 MHz), vid 0x8
powernow-k8: 1 : fid 0x10 (2400 MHz), vid 0xa
powernow-k8: 2 : fid 0xe (2200 MHz), vid 0xc
powernow-k8: 3 : fid 0xc (2000 MHz), vid 0xe
powernow-k8: 4 : fid 0xa (1800 MHz), vid 0x10
powernow-k8: 5 : fid 0x2 (1000 MHz), vid 0x12
initcall powernowk8_init+0x0/0xa7 [powernow_k8] returned 0 after 255604 usecs
calling inet6_init+0x0/0x2b2 [ipv6] @ 3432
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
initcall inet6_init+0x0/0x2b2 [ipv6] returned 0 after 14123 usecs
calling ip6_tables_init+0x0/0xaf [ip6_tables] @ 3446
ip6_tables: (C) 2000-2006 Netfilter Core Team
initcall ip6_tables_init+0x0/0xaf [ip6_tables] returned 0 after 4382 usecs
calling ip6table_filter_init+0x0/0x6f [ip6table_filter] @ 3455
initcall ip6table_filter_init+0x0/0x6f [ip6table_filter] returned 0 after 35 usecs
calling reject_tg6_init+0x0/0x12 [ip6t_REJECT] @ 3458
initcall reject_tg6_init+0x0/0x12 [ip6t_REJECT] returned 0 after 2 usecs
calling nf_conntrack_netbios_ns_init+0x0/0x1e [nf_conntrack_netbios_ns] @ 3492
initcall nf_conntrack_netbios_ns_init+0x0/0x1e [nf_conntrack_netbios_ns] returned 0 after 2 usecs
calling init_sunrpc+0x0/0x5d [sunrpc] @ 4036
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
initcall init_sunrpc+0x0/0x5d [sunrpc] returned 0 after 26862 usecs
calling init_nlm+0x0/0x22 [lockd] @ 4034
initcall init_nlm+0x0/0x22 [lockd] returned 0 after 14 usecs
warning: `dbus-daemon' uses 32-bit capabilities (legacy support in use)
calling rfkill_init+0x0/0x7a [rfkill] @ 4116
initcall rfkill_init+0x0/0x7a [rfkill] returned 0 after 136 usecs
calling bt_init+0x0/0x5d [bluetooth] @ 4116
Bluetooth: Core ver 2.15
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
initcall bt_init+0x0/0x5d [bluetooth] returned 0 after 37453 usecs
calling l2cap_init+0x0/0xe4 [l2cap] @ 4138
Bluetooth: L2CAP ver 2.14
Bluetooth: L2CAP socket layer initialized
initcall l2cap_init+0x0/0xe4 [l2cap] returned 0 after 4435 usecs
calling rfcomm_init+0x0/0xd5 [rfcomm] @ 4136
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
initcall rfcomm_init+0x0/0xd5 [rfcomm] returned 0 after 28358 usecs
calling init_rpcsec_gss+0x0/0x4d [auth_rpcgss] @ 4165
initcall init_rpcsec_gss+0x0/0x4d [auth_rpcgss] returned 0 after 30 usecs
calling init_nfs_fs+0x0/0x125 [nfs] @ 4165
initcall init_nfs_fs+0x0/0x125 [nfs] returned 0 after 572 usecs
svc: failed to register lockdv1 RPC service (errno 97).
eth0: no IPv6 routers present
calling hidp_init+0x0/0x60 [hidp] @ 4281
Bluetooth: HIDP (Human Interface Emulation) ver 1.2
initcall hidp_init+0x0/0x60 [hidp] returned 0 after 16003 usecs
calling init_autofs4_fs+0x0/0x26 [autofs4] @ 4297
initcall init_autofs4_fs+0x0/0x26 [autofs4] returned 0 after 117 usecs
rport-0:0-19: blocked FC remote port time out: removing rport
rport-1:0-20: blocked FC remote port time out: removing rport
[-- Attachment #3: kconfig-rip-null --]
[-- Type: text/plain, Size: 94300 bytes --]
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.34-rc1
# Mon Mar 8 13:46:40 2010
#
CONFIG_64BIT=y
# CONFIG_X86_32 is not set
CONFIG_X86_64=y
CONFIG_X86=y
CONFIG_OUTPUT_FORMAT="elf64-x86-64"
CONFIG_ARCH_DEFCONFIG="arch/x86/configs/x86_64_defconfig"
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_MMU=y
CONFIG_ZONE_DMA=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
# CONFIG_RWSEM_GENERIC_SPINLOCK is not set
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_ARCH_HAS_CPU_RELAX=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
CONFIG_HAVE_CPUMASK_OF_CPU_MAP=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ZONE_DMA32=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_AUDIT_ARCH=y
CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_HAVE_EARLY_RES=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_USE_GENERIC_SMP_HELPERS=y
CONFIG_X86_64_SMP=y
CONFIG_X86_HT=y
CONFIG_X86_TRAMPOLINE=y
# CONFIG_KTIME_SCALAR is not set
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_CONSTRUCTORS=y
#
# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_BZIP2=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_HAVE_KERNEL_LZO=y
CONFIG_KERNEL_GZIP=y
# CONFIG_KERNEL_BZIP2 is not set
# CONFIG_KERNEL_LZMA is not set
# CONFIG_KERNEL_LZO is not set
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
CONFIG_TASKSTATS=y
CONFIG_TASK_DELAY_ACCT=y
CONFIG_TASK_XACCT=y
CONFIG_TASK_IO_ACCOUNTING=y
CONFIG_AUDIT=y
CONFIG_AUDITSYSCALL=y
CONFIG_AUDIT_TREE=y
#
# RCU Subsystem
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=64
# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_RCU_FAST_NO_HZ is not set
# CONFIG_TREE_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=20
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
CONFIG_CGROUPS=y
# CONFIG_CGROUP_DEBUG is not set
CONFIG_CGROUP_NS=y
# CONFIG_CGROUP_FREEZER is not set
CONFIG_CGROUP_DEVICE=y
CONFIG_CPUSETS=y
CONFIG_PROC_PID_CPUSET=y
CONFIG_CGROUP_CPUACCT=y
CONFIG_RESOURCE_COUNTERS=y
# CONFIG_CGROUP_MEM_RES_CTLR is not set
CONFIG_CGROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
CONFIG_RT_GROUP_SCHED=y
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
CONFIG_RELAY=y
CONFIG_NAMESPACES=y
CONFIG_UTS_NS=y
CONFIG_IPC_NS=y
CONFIG_USER_NS=y
CONFIG_PID_NS=y
# CONFIG_NET_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_RD_GZIP=y
CONFIG_RD_BZIP2=y
CONFIG_RD_LZMA=y
CONFIG_RD_LZO=y
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_KALLSYMS_EXTRA_PASS=y
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_PCSPKR_PLATFORM=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_HAVE_PERF_EVENTS=y
#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
# CONFIG_PERF_COUNTERS is not set
# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
# CONFIG_COMPAT_BRK is not set
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
CONFIG_PROFILING=y
CONFIG_TRACEPOINTS=y
CONFIG_OPROFILE=m
# CONFIG_OPROFILE_EVENT_MULTIPLEX is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_KPROBES=y
CONFIG_OPTPROBES=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_KRETPROBES=y
CONFIG_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_OPTPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_ATTRS=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_DMA_API_DEBUG=y
CONFIG_HAVE_HW_BREAKPOINT=y
CONFIG_HAVE_USER_RETURN_NOTIFIER=y
#
# GCOV-based kernel profiling
#
# CONFIG_GCOV_KERNEL is not set
CONFIG_SLOW_WORK=y
# CONFIG_SLOW_WORK_DEBUG is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
CONFIG_MODULE_SRCVERSION_ALL=y
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
CONFIG_BLK_DEV_BSG=y
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_BLK_CGROUP is not set
CONFIG_BLOCK_COMPAT=y
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_CFQ_GROUP_IOSCHED is not set
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
CONFIG_PREEMPT_NOTIFIERS=y
# CONFIG_INLINE_SPIN_TRYLOCK is not set
# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
# CONFIG_INLINE_SPIN_LOCK is not set
# CONFIG_INLINE_SPIN_LOCK_BH is not set
# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
CONFIG_INLINE_SPIN_UNLOCK=y
# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
# CONFIG_INLINE_READ_TRYLOCK is not set
# CONFIG_INLINE_READ_LOCK is not set
# CONFIG_INLINE_READ_LOCK_BH is not set
# CONFIG_INLINE_READ_LOCK_IRQ is not set
# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
CONFIG_INLINE_READ_UNLOCK=y
# CONFIG_INLINE_READ_UNLOCK_BH is not set
CONFIG_INLINE_READ_UNLOCK_IRQ=y
# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
# CONFIG_INLINE_WRITE_TRYLOCK is not set
# CONFIG_INLINE_WRITE_LOCK is not set
# CONFIG_INLINE_WRITE_LOCK_BH is not set
# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
CONFIG_INLINE_WRITE_UNLOCK=y
# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
CONFIG_MUTEX_SPIN_ON_OWNER=y
CONFIG_FREEZER=y
#
# Processor type and features
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_SMP=y
# CONFIG_SPARSE_IRQ is not set
CONFIG_X86_MPPARSE=y
CONFIG_X86_EXTENDED_PLATFORM=y
# CONFIG_X86_VSMP is not set
CONFIG_X86_SUPPORTS_MEMORY_FAILURE=y
CONFIG_SCHED_OMIT_FRAME_POINTER=y
CONFIG_PARAVIRT_GUEST=y
CONFIG_XEN=y
CONFIG_XEN_MAX_DOMAIN_MEMORY=32
CONFIG_XEN_SAVE_RESTORE=y
# CONFIG_XEN_DEBUG_FS is not set
CONFIG_KVM_CLOCK=y
CONFIG_KVM_GUEST=y
CONFIG_PARAVIRT=y
# CONFIG_PARAVIRT_SPINLOCKS is not set
CONFIG_PARAVIRT_CLOCK=y
# CONFIG_PARAVIRT_DEBUG is not set
CONFIG_NO_BOOTMEM=y
# CONFIG_MEMTEST is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MGEODE_LX is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_MVIAC7 is not set
# CONFIG_MPSC is not set
# CONFIG_MCORE2 is not set
# CONFIG_MATOM is not set
CONFIG_GENERIC_CPU=y
CONFIG_X86_CPU=y
CONFIG_X86_INTERNODE_CACHE_SHIFT=7
CONFIG_X86_CMPXCHG=y
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_X86_XADD=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_TSC=y
CONFIG_X86_CMPXCHG64=y
CONFIG_X86_CMOV=y
CONFIG_X86_MINIMUM_CPU_FAMILY=64
CONFIG_X86_DEBUGCTLMSR=y
CONFIG_CPU_SUP_INTEL=y
CONFIG_CPU_SUP_AMD=y
CONFIG_CPU_SUP_CENTAUR=y
# CONFIG_X86_DS is not set
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
CONFIG_DMI=y
CONFIG_GART_IOMMU=y
CONFIG_CALGARY_IOMMU=y
CONFIG_CALGARY_IOMMU_ENABLED_BY_DEFAULT=y
CONFIG_AMD_IOMMU=y
# CONFIG_AMD_IOMMU_STATS is not set
CONFIG_SWIOTLB=y
CONFIG_IOMMU_HELPER=y
CONFIG_IOMMU_API=y
# CONFIG_MAXSMP is not set
CONFIG_NR_CPUS=16
CONFIG_SCHED_SMT=y
CONFIG_SCHED_MC=y
# CONFIG_PREEMPT_NONE is not set
CONFIG_PREEMPT_VOLUNTARY=y
# CONFIG_PREEMPT is not set
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
# CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS is not set
CONFIG_X86_MCE=y
CONFIG_X86_MCE_INTEL=y
CONFIG_X86_MCE_AMD=y
CONFIG_X86_MCE_THRESHOLD=y
# CONFIG_X86_MCE_INJECT is not set
CONFIG_X86_THERMAL_VECTOR=y
CONFIG_I8K=m
# CONFIG_MICROCODE is not set
CONFIG_X86_MSR=y
CONFIG_X86_CPUID=y
CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
CONFIG_DIRECT_GBPAGES=y
CONFIG_NUMA=y
CONFIG_K8_NUMA=y
CONFIG_X86_64_ACPI_NUMA=y
CONFIG_NODES_SPAN_OTHER_NODES=y
# CONFIG_NUMA_EMU is not set
CONFIG_NODES_SHIFT=9
CONFIG_ARCH_PROC_KCORE_TEXT=y
CONFIG_ARCH_SPARSEMEM_DEFAULT=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000
CONFIG_SELECT_MEMORY_MODEL=y
# CONFIG_FLATMEM_MANUAL is not set
# CONFIG_DISCONTIGMEM_MANUAL is not set
CONFIG_SPARSEMEM_MANUAL=y
CONFIG_SPARSEMEM=y
CONFIG_NEED_MULTIPLE_NODES=y
CONFIG_HAVE_MEMORY_PRESENT=y
CONFIG_SPARSEMEM_EXTREME=y
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
CONFIG_SPARSEMEM_ALLOC_MEM_MAP_TOGETHER=y
CONFIG_SPARSEMEM_VMEMMAP=y
# CONFIG_MEMORY_HOTPLUG is not set
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_MIGRATION=y
CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_MMU_NOTIFIER=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y
# CONFIG_MEMORY_FAILURE is not set
# CONFIG_X86_CHECK_BIOS_CORRUPTION is not set
CONFIG_X86_RESERVE_LOW_64K=y
CONFIG_MTRR=y
CONFIG_MTRR_SANITIZER=y
CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=0
CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1
CONFIG_X86_PAT=y
CONFIG_ARCH_USES_PG_UNCACHED=y
CONFIG_EFI=y
CONFIG_SECCOMP=y
CONFIG_CC_STACKPROTECTOR=y
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
# CONFIG_HZ_300 is not set
CONFIG_HZ_1000=y
CONFIG_HZ=1000
CONFIG_SCHED_HRTICK=y
CONFIG_KEXEC=y
CONFIG_CRASH_DUMP=y
# CONFIG_KEXEC_JUMP is not set
CONFIG_PHYSICAL_START=0x1000000
CONFIG_RELOCATABLE=y
CONFIG_PHYSICAL_ALIGN=0x1000000
CONFIG_HOTPLUG_CPU=y
# CONFIG_COMPAT_VDSO is not set
# CONFIG_CMDLINE_BOOL is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID=y
#
# Power management and ACPI options
#
CONFIG_ARCH_HIBERNATION_HEADER=y
CONFIG_PM=y
CONFIG_PM_DEBUG=y
# CONFIG_PM_ADVANCED_DEBUG is not set
# CONFIG_PM_VERBOSE is not set
CONFIG_CAN_PM_TRACE=y
CONFIG_PM_TRACE=y
CONFIG_PM_TRACE_RTC=y
CONFIG_PM_SLEEP_SMP=y
CONFIG_PM_SLEEP=y
CONFIG_SUSPEND=y
# CONFIG_PM_TEST_SUSPEND is not set
CONFIG_SUSPEND_FREEZER=y
CONFIG_HIBERNATION_NVS=y
CONFIG_HIBERNATION=y
CONFIG_PM_STD_PARTITION=""
# CONFIG_PM_RUNTIME is not set
CONFIG_PM_OPS=y
CONFIG_ACPI=y
CONFIG_ACPI_SLEEP=y
CONFIG_ACPI_PROCFS=y
CONFIG_ACPI_PROCFS_POWER=y
# CONFIG_ACPI_POWER_METER is not set
CONFIG_ACPI_SYSFS_POWER=y
CONFIG_ACPI_PROC_EVENT=y
CONFIG_ACPI_AC=m
CONFIG_ACPI_BATTERY=m
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_VIDEO=m
CONFIG_ACPI_FAN=y
CONFIG_ACPI_DOCK=y
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_HOTPLUG_CPU=y
# CONFIG_ACPI_PROCESSOR_AGGREGATOR is not set
CONFIG_ACPI_THERMAL=y
CONFIG_ACPI_NUMA=y
# CONFIG_ACPI_CUSTOM_DSDT is not set
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_PCI_SLOT=m
CONFIG_X86_PM_TIMER=y
CONFIG_ACPI_CONTAINER=y
CONFIG_ACPI_SBS=m
# CONFIG_SFI is not set
#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=y
CONFIG_CPU_FREQ_DEBUG=y
CONFIG_CPU_FREQ_STAT=m
CONFIG_CPU_FREQ_STAT_DETAILS=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=y
CONFIG_CPU_FREQ_GOV_USERSPACE=y
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
#
# CPUFreq processor drivers
#
# CONFIG_X86_PCC_CPUFREQ is not set
CONFIG_X86_ACPI_CPUFREQ=m
CONFIG_X86_POWERNOW_K8=m
# CONFIG_X86_SPEEDSTEP_CENTRINO is not set
CONFIG_X86_P4_CLOCKMOD=m
#
# shared options
#
CONFIG_X86_SPEEDSTEP_LIB=m
CONFIG_CPU_IDLE=y
CONFIG_CPU_IDLE_GOV_LADDER=y
CONFIG_CPU_IDLE_GOV_MENU=y
#
# Memory power savings
#
# CONFIG_I7300_IDLE is not set
#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
CONFIG_PCI_DOMAINS=y
# CONFIG_DMAR is not set
# CONFIG_INTR_REMAP is not set
CONFIG_PCIEPORTBUS=y
CONFIG_HOTPLUG_PCI_PCIE=m
CONFIG_PCIEAER=y
# CONFIG_PCIE_ECRC is not set
# CONFIG_PCIEAER_INJECT is not set
CONFIG_PCIEASPM=y
# CONFIG_PCIEASPM_DEBUG is not set
CONFIG_ARCH_SUPPORTS_MSI=y
CONFIG_PCI_MSI=y
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_STUB is not set
CONFIG_HT_IRQ=y
# CONFIG_PCI_IOV is not set
CONFIG_PCI_IOAPIC=y
CONFIG_ISA_DMA_API=y
CONFIG_K8_NB=y
CONFIG_PCCARD=y
CONFIG_PCMCIA=y
CONFIG_PCMCIA_LOAD_CIS=y
CONFIG_CARDBUS=y
#
# PC-card bridges
#
CONFIG_YENTA=m
CONFIG_YENTA_O2=y
CONFIG_YENTA_RICOH=y
CONFIG_YENTA_TI=y
CONFIG_YENTA_ENE_TUNE=y
CONFIG_YENTA_TOSHIBA=y
CONFIG_PD6729=m
CONFIG_I82092=m
CONFIG_PCCARD_NONSTATIC=m
CONFIG_HOTPLUG_PCI=y
CONFIG_HOTPLUG_PCI_FAKE=m
CONFIG_HOTPLUG_PCI_ACPI=y
CONFIG_HOTPLUG_PCI_ACPI_IBM=m
# CONFIG_HOTPLUG_PCI_CPCI is not set
CONFIG_HOTPLUG_PCI_SHPC=m
#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
CONFIG_COMPAT_BINFMT_ELF=y
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
# CONFIG_HAVE_AOUT is not set
CONFIG_BINFMT_MISC=y
CONFIG_IA32_EMULATION=y
# CONFIG_IA32_AOUT is not set
CONFIG_COMPAT=y
CONFIG_COMPAT_FOR_U64_ALIGNMENT=y
CONFIG_SYSVIPC_COMPAT=y
CONFIG_NET=y
CONFIG_COMPAT_NETLINK_MESSAGES=y
#
# Networking options
#
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_XFRM=y
CONFIG_XFRM_USER=y
CONFIG_XFRM_SUB_POLICY=y
CONFIG_XFRM_MIGRATE=y
CONFIG_XFRM_STATISTICS=y
CONFIG_XFRM_IPCOMP=m
CONFIG_NET_KEY=m
CONFIG_NET_KEY_MIGRATE=y
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_ASK_IP_FIB_HASH=y
# CONFIG_IP_FIB_TRIE is not set
CONFIG_IP_FIB_HASH=y
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_MULTIPATH=y
CONFIG_IP_ROUTE_VERBOSE=y
# CONFIG_IP_PNP is not set
CONFIG_NET_IPIP=m
CONFIG_NET_IPGRE=m
CONFIG_NET_IPGRE_BROADCAST=y
CONFIG_IP_MROUTE=y
CONFIG_IP_PIMSM_V1=y
CONFIG_IP_PIMSM_V2=y
# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
CONFIG_INET_XFRM_TUNNEL=m
CONFIG_INET_TUNNEL=m
CONFIG_INET_XFRM_MODE_TRANSPORT=m
CONFIG_INET_XFRM_MODE_TUNNEL=m
CONFIG_INET_XFRM_MODE_BEET=m
CONFIG_INET_LRO=y
CONFIG_INET_DIAG=m
CONFIG_INET_TCP_DIAG=m
CONFIG_TCP_CONG_ADVANCED=y
CONFIG_TCP_CONG_BIC=m
CONFIG_TCP_CONG_CUBIC=y
CONFIG_TCP_CONG_WESTWOOD=m
CONFIG_TCP_CONG_HTCP=m
CONFIG_TCP_CONG_HSTCP=m
CONFIG_TCP_CONG_HYBLA=m
CONFIG_TCP_CONG_VEGAS=m
CONFIG_TCP_CONG_SCALABLE=m
CONFIG_TCP_CONG_LP=m
CONFIG_TCP_CONG_VENO=m
CONFIG_TCP_CONG_YEAH=m
CONFIG_TCP_CONG_ILLINOIS=m
# CONFIG_DEFAULT_BIC is not set
CONFIG_DEFAULT_CUBIC=y
# CONFIG_DEFAULT_HTCP is not set
# CONFIG_DEFAULT_VEGAS is not set
# CONFIG_DEFAULT_WESTWOOD is not set
# CONFIG_DEFAULT_RENO is not set
CONFIG_DEFAULT_TCP_CONG="cubic"
CONFIG_TCP_MD5SIG=y
CONFIG_IPV6=m
CONFIG_IPV6_PRIVACY=y
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_IPV6_ROUTE_INFO=y
CONFIG_IPV6_OPTIMISTIC_DAD=y
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
CONFIG_IPV6_MIP6=m
CONFIG_INET6_XFRM_TUNNEL=m
CONFIG_INET6_TUNNEL=m
CONFIG_INET6_XFRM_MODE_TRANSPORT=m
CONFIG_INET6_XFRM_MODE_TUNNEL=m
CONFIG_INET6_XFRM_MODE_BEET=m
CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
CONFIG_IPV6_SIT=m
# CONFIG_IPV6_SIT_6RD is not set
CONFIG_IPV6_NDISC_NODETYPE=y
CONFIG_IPV6_TUNNEL=m
CONFIG_IPV6_MULTIPLE_TABLES=y
CONFIG_IPV6_SUBTREES=y
CONFIG_IPV6_MROUTE=y
CONFIG_IPV6_PIMSM_V2=y
CONFIG_NETLABEL=y
CONFIG_NETWORK_SECMARK=y
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
CONFIG_NETFILTER_ADVANCED=y
CONFIG_BRIDGE_NETFILTER=y
#
# Core Netfilter Configuration
#
CONFIG_NETFILTER_NETLINK=m
CONFIG_NETFILTER_NETLINK_QUEUE=m
CONFIG_NETFILTER_NETLINK_LOG=m
CONFIG_NF_CONNTRACK=y
CONFIG_NF_CT_ACCT=y
CONFIG_NF_CONNTRACK_MARK=y
CONFIG_NF_CONNTRACK_SECMARK=y
CONFIG_NF_CONNTRACK_EVENTS=y
CONFIG_NF_CT_PROTO_DCCP=m
CONFIG_NF_CT_PROTO_GRE=m
CONFIG_NF_CT_PROTO_SCTP=m
CONFIG_NF_CT_PROTO_UDPLITE=m
CONFIG_NF_CONNTRACK_AMANDA=m
CONFIG_NF_CONNTRACK_FTP=m
CONFIG_NF_CONNTRACK_H323=m
CONFIG_NF_CONNTRACK_IRC=m
CONFIG_NF_CONNTRACK_NETBIOS_NS=m
CONFIG_NF_CONNTRACK_PPTP=m
CONFIG_NF_CONNTRACK_SANE=m
CONFIG_NF_CONNTRACK_SIP=m
CONFIG_NF_CONNTRACK_TFTP=m
CONFIG_NF_CT_NETLINK=m
# CONFIG_NETFILTER_TPROXY is not set
CONFIG_NETFILTER_XTABLES=y
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m
# CONFIG_NETFILTER_XT_TARGET_CT is not set
CONFIG_NETFILTER_XT_TARGET_DSCP=m
CONFIG_NETFILTER_XT_TARGET_HL=m
# CONFIG_NETFILTER_XT_TARGET_LED is not set
CONFIG_NETFILTER_XT_TARGET_MARK=m
CONFIG_NETFILTER_XT_TARGET_NFLOG=m
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
CONFIG_NETFILTER_XT_TARGET_RATEEST=m
CONFIG_NETFILTER_XT_TARGET_TRACE=m
CONFIG_NETFILTER_XT_TARGET_SECMARK=m
CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
# CONFIG_NETFILTER_XT_MATCH_CLUSTER is not set
CONFIG_NETFILTER_XT_MATCH_COMMENT=m
CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
CONFIG_NETFILTER_XT_MATCH_CONNTRACK=y
CONFIG_NETFILTER_XT_MATCH_DCCP=m
CONFIG_NETFILTER_XT_MATCH_DSCP=m
CONFIG_NETFILTER_XT_MATCH_ESP=m
CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
CONFIG_NETFILTER_XT_MATCH_HELPER=m
CONFIG_NETFILTER_XT_MATCH_HL=m
CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
CONFIG_NETFILTER_XT_MATCH_MAC=m
CONFIG_NETFILTER_XT_MATCH_MARK=m
CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
CONFIG_NETFILTER_XT_MATCH_OWNER=m
CONFIG_NETFILTER_XT_MATCH_POLICY=m
CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
CONFIG_NETFILTER_XT_MATCH_QUOTA=m
CONFIG_NETFILTER_XT_MATCH_RATEEST=m
CONFIG_NETFILTER_XT_MATCH_REALM=m
# CONFIG_NETFILTER_XT_MATCH_RECENT is not set
CONFIG_NETFILTER_XT_MATCH_SCTP=m
CONFIG_NETFILTER_XT_MATCH_STATE=y
CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
CONFIG_NETFILTER_XT_MATCH_STRING=m
CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
CONFIG_NETFILTER_XT_MATCH_TIME=m
CONFIG_NETFILTER_XT_MATCH_U32=m
# CONFIG_NETFILTER_XT_MATCH_OSF is not set
CONFIG_IP_VS=m
# CONFIG_IP_VS_IPV6 is not set
# CONFIG_IP_VS_DEBUG is not set
CONFIG_IP_VS_TAB_BITS=12
#
# IPVS transport protocol load balancing support
#
CONFIG_IP_VS_PROTO_TCP=y
CONFIG_IP_VS_PROTO_UDP=y
CONFIG_IP_VS_PROTO_AH_ESP=y
CONFIG_IP_VS_PROTO_ESP=y
CONFIG_IP_VS_PROTO_AH=y
# CONFIG_IP_VS_PROTO_SCTP is not set
#
# IPVS scheduler
#
CONFIG_IP_VS_RR=m
CONFIG_IP_VS_WRR=m
CONFIG_IP_VS_LC=m
CONFIG_IP_VS_WLC=m
CONFIG_IP_VS_LBLC=m
CONFIG_IP_VS_LBLCR=m
CONFIG_IP_VS_DH=m
CONFIG_IP_VS_SH=m
CONFIG_IP_VS_SED=m
CONFIG_IP_VS_NQ=m
#
# IPVS application helper
#
CONFIG_IP_VS_FTP=m
#
# IP: Netfilter Configuration
#
CONFIG_NF_DEFRAG_IPV4=y
CONFIG_NF_CONNTRACK_IPV4=y
# CONFIG_NF_CONNTRACK_PROC_COMPAT is not set
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=y
CONFIG_IP_NF_MATCH_ADDRTYPE=m
CONFIG_IP_NF_MATCH_AH=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_FILTER=y
CONFIG_IP_NF_TARGET_REJECT=y
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_NF_NAT=m
CONFIG_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_NETMAP=m
CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_NF_NAT_SNMP_BASIC=m
CONFIG_NF_NAT_PROTO_DCCP=m
CONFIG_NF_NAT_PROTO_GRE=m
CONFIG_NF_NAT_PROTO_UDPLITE=m
CONFIG_NF_NAT_PROTO_SCTP=m
CONFIG_NF_NAT_FTP=m
CONFIG_NF_NAT_IRC=m
CONFIG_NF_NAT_TFTP=m
CONFIG_NF_NAT_AMANDA=m
CONFIG_NF_NAT_PPTP=m
CONFIG_NF_NAT_H323=m
CONFIG_NF_NAT_SIP=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_CLUSTERIP=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_TTL=m
CONFIG_IP_NF_RAW=m
CONFIG_IP_NF_SECURITY=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
#
# IPv6: Netfilter Configuration
#
CONFIG_NF_CONNTRACK_IPV6=m
CONFIG_IP6_NF_QUEUE=m
CONFIG_IP6_NF_IPTABLES=m
CONFIG_IP6_NF_MATCH_AH=m
CONFIG_IP6_NF_MATCH_EUI64=m
CONFIG_IP6_NF_MATCH_FRAG=m
CONFIG_IP6_NF_MATCH_OPTS=m
CONFIG_IP6_NF_MATCH_HL=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
CONFIG_IP6_NF_MATCH_MH=m
CONFIG_IP6_NF_MATCH_RT=m
CONFIG_IP6_NF_TARGET_HL=m
CONFIG_IP6_NF_TARGET_LOG=m
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_MANGLE=m
CONFIG_IP6_NF_RAW=m
CONFIG_IP6_NF_SECURITY=m
#
# DECnet: Netfilter Configuration
#
# CONFIG_DECNET_NF_GRABULATOR is not set
CONFIG_BRIDGE_NF_EBTABLES=m
CONFIG_BRIDGE_EBT_BROUTE=m
CONFIG_BRIDGE_EBT_T_FILTER=m
CONFIG_BRIDGE_EBT_T_NAT=m
CONFIG_BRIDGE_EBT_802_3=m
CONFIG_BRIDGE_EBT_AMONG=m
CONFIG_BRIDGE_EBT_ARP=m
CONFIG_BRIDGE_EBT_IP=m
CONFIG_BRIDGE_EBT_IP6=m
CONFIG_BRIDGE_EBT_LIMIT=m
CONFIG_BRIDGE_EBT_MARK=m
CONFIG_BRIDGE_EBT_PKTTYPE=m
CONFIG_BRIDGE_EBT_STP=m
CONFIG_BRIDGE_EBT_VLAN=m
CONFIG_BRIDGE_EBT_ARPREPLY=m
CONFIG_BRIDGE_EBT_DNAT=m
CONFIG_BRIDGE_EBT_MARK_T=m
CONFIG_BRIDGE_EBT_REDIRECT=m
CONFIG_BRIDGE_EBT_SNAT=m
CONFIG_BRIDGE_EBT_LOG=m
CONFIG_BRIDGE_EBT_ULOG=m
CONFIG_BRIDGE_EBT_NFLOG=m
CONFIG_IP_DCCP=m
CONFIG_INET_DCCP_DIAG=m
#
# DCCP CCIDs Configuration (EXPERIMENTAL)
#
# CONFIG_IP_DCCP_CCID2_DEBUG is not set
CONFIG_IP_DCCP_CCID3=y
# CONFIG_IP_DCCP_CCID3_DEBUG is not set
CONFIG_IP_DCCP_CCID3_RTO=100
CONFIG_IP_DCCP_TFRC_LIB=y
#
# DCCP Kernel Hacking
#
# CONFIG_IP_DCCP_DEBUG is not set
CONFIG_NET_DCCPPROBE=m
CONFIG_IP_SCTP=m
# CONFIG_SCTP_DBG_MSG is not set
# CONFIG_SCTP_DBG_OBJCNT is not set
# CONFIG_SCTP_HMAC_NONE is not set
# CONFIG_SCTP_HMAC_SHA1 is not set
CONFIG_SCTP_HMAC_MD5=y
# CONFIG_RDS is not set
CONFIG_TIPC=m
# CONFIG_TIPC_ADVANCED is not set
# CONFIG_TIPC_DEBUG is not set
CONFIG_ATM=m
CONFIG_ATM_CLIP=m
# CONFIG_ATM_CLIP_NO_ICMP is not set
CONFIG_ATM_LANE=m
# CONFIG_ATM_MPOA is not set
CONFIG_ATM_BR2684=m
# CONFIG_ATM_BR2684_IPFILTER is not set
CONFIG_STP=m
CONFIG_GARP=m
CONFIG_BRIDGE=m
CONFIG_BRIDGE_IGMP_SNOOPING=y
# CONFIG_NET_DSA is not set
CONFIG_VLAN_8021Q=m
CONFIG_VLAN_8021Q_GVRP=y
CONFIG_DECNET=m
CONFIG_DECNET_ROUTER=y
CONFIG_LLC=y
# CONFIG_LLC2 is not set
CONFIG_IPX=m
# CONFIG_IPX_INTERN is not set
CONFIG_ATALK=m
CONFIG_DEV_APPLETALK=m
CONFIG_IPDDP=m
CONFIG_IPDDP_ENCAP=y
CONFIG_IPDDP_DECAP=y
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
CONFIG_WAN_ROUTER=m
# CONFIG_PHONET is not set
# CONFIG_IEEE802154 is not set
CONFIG_NET_SCHED=y
#
# Queueing/Scheduling
#
CONFIG_NET_SCH_CBQ=m
CONFIG_NET_SCH_HTB=m
CONFIG_NET_SCH_HFSC=m
CONFIG_NET_SCH_ATM=m
CONFIG_NET_SCH_PRIO=m
# CONFIG_NET_SCH_MULTIQ is not set
CONFIG_NET_SCH_RED=m
CONFIG_NET_SCH_SFQ=m
CONFIG_NET_SCH_TEQL=m
CONFIG_NET_SCH_TBF=m
CONFIG_NET_SCH_GRED=m
CONFIG_NET_SCH_DSMARK=m
CONFIG_NET_SCH_NETEM=m
# CONFIG_NET_SCH_DRR is not set
CONFIG_NET_SCH_INGRESS=m
#
# Classification
#
CONFIG_NET_CLS=y
CONFIG_NET_CLS_BASIC=m
CONFIG_NET_CLS_TCINDEX=m
CONFIG_NET_CLS_ROUTE4=m
CONFIG_NET_CLS_ROUTE=y
CONFIG_NET_CLS_FW=m
CONFIG_NET_CLS_U32=m
CONFIG_CLS_U32_PERF=y
CONFIG_CLS_U32_MARK=y
CONFIG_NET_CLS_RSVP=m
CONFIG_NET_CLS_RSVP6=m
CONFIG_NET_CLS_FLOW=m
# CONFIG_NET_CLS_CGROUP is not set
CONFIG_NET_EMATCH=y
CONFIG_NET_EMATCH_STACK=32
CONFIG_NET_EMATCH_CMP=m
CONFIG_NET_EMATCH_NBYTE=m
CONFIG_NET_EMATCH_U32=m
CONFIG_NET_EMATCH_META=m
CONFIG_NET_EMATCH_TEXT=m
CONFIG_NET_CLS_ACT=y
CONFIG_NET_ACT_POLICE=m
CONFIG_NET_ACT_GACT=m
CONFIG_GACT_PROB=y
CONFIG_NET_ACT_MIRRED=m
CONFIG_NET_ACT_IPT=m
CONFIG_NET_ACT_NAT=m
CONFIG_NET_ACT_PEDIT=m
CONFIG_NET_ACT_SIMP=m
# CONFIG_NET_ACT_SKBEDIT is not set
CONFIG_NET_CLS_IND=y
CONFIG_NET_SCH_FIFO=y
# CONFIG_DCB is not set
#
# Network testing
#
CONFIG_NET_PKTGEN=m
# CONFIG_NET_TCPPROBE is not set
# CONFIG_NET_DROP_MONITOR is not set
CONFIG_HAMRADIO=y
#
# Packet Radio protocols
#
CONFIG_AX25=m
CONFIG_AX25_DAMA_SLAVE=y
CONFIG_NETROM=m
CONFIG_ROSE=m
#
# AX.25 network device drivers
#
CONFIG_MKISS=m
CONFIG_6PACK=m
CONFIG_BPQETHER=m
CONFIG_BAYCOM_SER_FDX=m
CONFIG_BAYCOM_SER_HDX=m
CONFIG_BAYCOM_PAR=m
CONFIG_YAM=m
CONFIG_CAN=m
CONFIG_CAN_RAW=m
CONFIG_CAN_BCM=m
#
# CAN Device Drivers
#
CONFIG_CAN_VCAN=m
# CONFIG_CAN_DEV is not set
# CONFIG_CAN_DEBUG_DEVICES is not set
CONFIG_IRDA=m
#
# IrDA protocols
#
CONFIG_IRLAN=m
CONFIG_IRNET=m
CONFIG_IRCOMM=m
# CONFIG_IRDA_ULTRA is not set
#
# IrDA options
#
CONFIG_IRDA_CACHE_LAST_LSAP=y
CONFIG_IRDA_FAST_RR=y
# CONFIG_IRDA_DEBUG is not set
#
# Infrared-port device drivers
#
#
# SIR device drivers
#
CONFIG_IRTTY_SIR=m
#
# Dongle support
#
CONFIG_DONGLE=y
CONFIG_ESI_DONGLE=m
CONFIG_ACTISYS_DONGLE=m
CONFIG_TEKRAM_DONGLE=m
CONFIG_TOIM3232_DONGLE=m
CONFIG_LITELINK_DONGLE=m
CONFIG_MA600_DONGLE=m
CONFIG_GIRBIL_DONGLE=m
CONFIG_MCP2120_DONGLE=m
CONFIG_OLD_BELKIN_DONGLE=m
CONFIG_ACT200L_DONGLE=m
CONFIG_KINGSUN_DONGLE=m
CONFIG_KSDAZZLE_DONGLE=m
CONFIG_KS959_DONGLE=m
#
# FIR device drivers
#
CONFIG_USB_IRDA=m
CONFIG_SIGMATEL_FIR=m
CONFIG_NSC_FIR=m
CONFIG_WINBOND_FIR=m
CONFIG_SMC_IRCC_FIR=m
CONFIG_ALI_FIR=m
CONFIG_VLSI_FIR=m
CONFIG_VIA_FIR=m
CONFIG_MCS_FIR=m
CONFIG_BT=m
CONFIG_BT_L2CAP=m
CONFIG_BT_SCO=m
CONFIG_BT_RFCOMM=m
CONFIG_BT_RFCOMM_TTY=y
CONFIG_BT_BNEP=m
CONFIG_BT_BNEP_MC_FILTER=y
CONFIG_BT_BNEP_PROTO_FILTER=y
CONFIG_BT_CMTP=m
CONFIG_BT_HIDP=m
#
# Bluetooth device drivers
#
CONFIG_BT_HCIBTUSB=m
CONFIG_BT_HCIBTSDIO=m
CONFIG_BT_HCIUART=m
CONFIG_BT_HCIUART_H4=y
CONFIG_BT_HCIUART_BCSP=y
CONFIG_BT_HCIUART_LL=y
CONFIG_BT_HCIBCM203X=m
CONFIG_BT_HCIBPA10X=m
CONFIG_BT_HCIBFUSB=m
CONFIG_BT_HCIDTL1=m
CONFIG_BT_HCIBT3C=m
CONFIG_BT_HCIBLUECARD=m
CONFIG_BT_HCIBTUART=m
CONFIG_BT_HCIVHCI=m
# CONFIG_BT_MRVL is not set
# CONFIG_BT_ATH3K is not set
# CONFIG_AF_RXRPC is not set
CONFIG_FIB_RULES=y
CONFIG_WIRELESS=y
CONFIG_WIRELESS_EXT=y
CONFIG_WEXT_CORE=y
CONFIG_WEXT_PROC=y
CONFIG_WEXT_SPY=y
CONFIG_WEXT_PRIV=y
CONFIG_CFG80211=m
# CONFIG_NL80211_TESTMODE is not set
# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
# CONFIG_CFG80211_REG_DEBUG is not set
CONFIG_CFG80211_DEFAULT_PS=y
# CONFIG_CFG80211_DEBUGFS is not set
# CONFIG_CFG80211_INTERNAL_REGDB is not set
CONFIG_CFG80211_WEXT=y
CONFIG_WIRELESS_EXT_SYSFS=y
CONFIG_LIB80211=m
CONFIG_LIB80211_CRYPT_WEP=m
CONFIG_LIB80211_CRYPT_CCMP=m
CONFIG_LIB80211_CRYPT_TKIP=m
# CONFIG_LIB80211_DEBUG is not set
CONFIG_MAC80211=m
CONFIG_MAC80211_RC_MINSTREL=y
# CONFIG_MAC80211_RC_DEFAULT_PID is not set
CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
CONFIG_MAC80211_RC_DEFAULT="minstrel"
CONFIG_MAC80211_MESH=y
CONFIG_MAC80211_LEDS=y
CONFIG_MAC80211_DEBUGFS=y
# CONFIG_MAC80211_DEBUG_MENU is not set
# CONFIG_WIMAX is not set
CONFIG_RFKILL=m
CONFIG_RFKILL_LEDS=y
CONFIG_RFKILL_INPUT=y
CONFIG_NET_9P=m
CONFIG_NET_9P_VIRTIO=m
# CONFIG_NET_9P_RDMA is not set
# CONFIG_NET_9P_DEBUG is not set
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
CONFIG_FIRMWARE_IN_KERNEL=y
CONFIG_EXTRA_FIRMWARE=""
# CONFIG_DEBUG_DRIVER is not set
CONFIG_DEBUG_DEVRES=y
CONFIG_SYS_HYPERVISOR=y
CONFIG_CONNECTOR=y
CONFIG_PROC_EVENTS=y
CONFIG_MTD=m
# CONFIG_MTD_DEBUG is not set
# CONFIG_MTD_TESTS is not set
CONFIG_MTD_CONCAT=m
CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_REDBOOT_PARTS=m
CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
CONFIG_MTD_AR7_PARTS=m
#
# User Modules And Translation Layers
#
CONFIG_MTD_CHAR=m
CONFIG_MTD_BLKDEVS=m
CONFIG_MTD_BLOCK=m
CONFIG_MTD_BLOCK_RO=m
CONFIG_FTL=m
CONFIG_NFTL=m
CONFIG_NFTL_RW=y
CONFIG_INFTL=m
CONFIG_RFD_FTL=m
CONFIG_SSFDC=m
CONFIG_MTD_OOPS=m
#
# RAM/ROM/Flash chip drivers
#
CONFIG_MTD_CFI=m
CONFIG_MTD_JEDECPROBE=m
CONFIG_MTD_GEN_PROBE=m
# CONFIG_MTD_CFI_ADV_OPTIONS is not set
CONFIG_MTD_MAP_BANK_WIDTH_1=y
CONFIG_MTD_MAP_BANK_WIDTH_2=y
CONFIG_MTD_MAP_BANK_WIDTH_4=y
# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
CONFIG_MTD_CFI_I1=y
CONFIG_MTD_CFI_I2=y
# CONFIG_MTD_CFI_I4 is not set
# CONFIG_MTD_CFI_I8 is not set
CONFIG_MTD_CFI_INTELEXT=m
CONFIG_MTD_CFI_AMDSTD=m
CONFIG_MTD_CFI_STAA=m
CONFIG_MTD_CFI_UTIL=m
CONFIG_MTD_RAM=m
CONFIG_MTD_ROM=m
CONFIG_MTD_ABSENT=m
#
# Mapping drivers for chip access
#
CONFIG_MTD_COMPLEX_MAPPINGS=y
# CONFIG_MTD_PHYSMAP is not set
CONFIG_MTD_SC520CDP=m
CONFIG_MTD_NETSC520=m
CONFIG_MTD_TS5500=m
# CONFIG_MTD_SBC_GXX is not set
# CONFIG_MTD_AMD76XROM is not set
# CONFIG_MTD_ICHXROM is not set
CONFIG_MTD_ESB2ROM=m
CONFIG_MTD_CK804XROM=m
CONFIG_MTD_SCB2_FLASH=m
# CONFIG_MTD_NETtel is not set
# CONFIG_MTD_L440GX is not set
CONFIG_MTD_PCI=m
# CONFIG_MTD_INTEL_VR_NOR is not set
# CONFIG_MTD_PLATRAM is not set
#
# Self-contained MTD device drivers
#
CONFIG_MTD_PMC551=m
# CONFIG_MTD_PMC551_BUGFIX is not set
# CONFIG_MTD_PMC551_DEBUG is not set
# CONFIG_MTD_SLRAM is not set
# CONFIG_MTD_PHRAM is not set
CONFIG_MTD_MTDRAM=m
CONFIG_MTDRAM_TOTAL_SIZE=4096
CONFIG_MTDRAM_ERASE_SIZE=128
CONFIG_MTD_BLOCK2MTD=m
#
# Disk-On-Chip Device Drivers
#
# CONFIG_MTD_DOC2000 is not set
# CONFIG_MTD_DOC2001 is not set
# CONFIG_MTD_DOC2001PLUS is not set
CONFIG_MTD_NAND=m
# CONFIG_MTD_NAND_VERIFY_WRITE is not set
CONFIG_MTD_NAND_ECC_SMC=y
# CONFIG_MTD_NAND_MUSEUM_IDS is not set
CONFIG_MTD_NAND_IDS=m
CONFIG_MTD_NAND_DISKONCHIP=m
# CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADVANCED is not set
CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS=0
# CONFIG_MTD_NAND_DISKONCHIP_BBTWRITE is not set
# CONFIG_MTD_NAND_CAFE is not set
CONFIG_MTD_NAND_NANDSIM=m
# CONFIG_MTD_NAND_PLATFORM is not set
CONFIG_MTD_ALAUDA=m
# CONFIG_MTD_ONENAND is not set
#
# LPDDR flash memory drivers
#
# CONFIG_MTD_LPDDR is not set
#
# UBI - Unsorted block images
#
CONFIG_MTD_UBI=m
CONFIG_MTD_UBI_WL_THRESHOLD=4096
CONFIG_MTD_UBI_BEB_RESERVE=1
# CONFIG_MTD_UBI_GLUEBI is not set
#
# UBI debugging options
#
# CONFIG_MTD_UBI_DEBUG is not set
CONFIG_PARPORT=m
CONFIG_PARPORT_PC=m
CONFIG_PARPORT_SERIAL=m
# CONFIG_PARPORT_PC_FIFO is not set
# CONFIG_PARPORT_PC_SUPERIO is not set
CONFIG_PARPORT_PC_PCMCIA=m
# CONFIG_PARPORT_GSC is not set
# CONFIG_PARPORT_AX88796 is not set
CONFIG_PARPORT_1284=y
CONFIG_PARPORT_NOT_PC=y
CONFIG_PNP=y
CONFIG_PNP_DEBUG_MESSAGES=y
#
# Protocols
#
CONFIG_PNPACPI=y
CONFIG_BLK_DEV=y
CONFIG_BLK_DEV_FD=m
CONFIG_PARIDE=m
#
# Parallel IDE high-level drivers
#
CONFIG_PARIDE_PD=m
CONFIG_PARIDE_PCD=m
CONFIG_PARIDE_PF=m
CONFIG_PARIDE_PT=m
CONFIG_PARIDE_PG=m
#
# Parallel IDE protocol modules
#
CONFIG_PARIDE_ATEN=m
CONFIG_PARIDE_BPCK=m
CONFIG_PARIDE_COMM=m
CONFIG_PARIDE_DSTR=m
CONFIG_PARIDE_FIT2=m
CONFIG_PARIDE_FIT3=m
CONFIG_PARIDE_EPAT=m
CONFIG_PARIDE_EPATC8=y
CONFIG_PARIDE_EPIA=m
CONFIG_PARIDE_FRIQ=m
CONFIG_PARIDE_FRPW=m
CONFIG_PARIDE_KBIC=m
CONFIG_PARIDE_KTTI=m
CONFIG_PARIDE_ON20=m
CONFIG_PARIDE_ON26=m
CONFIG_BLK_CPQ_DA=m
CONFIG_BLK_CPQ_CISS_DA=m
CONFIG_CISS_SCSI_TAPE=y
CONFIG_BLK_DEV_DAC960=m
CONFIG_BLK_DEV_UMEM=m
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_CRYPTOLOOP=m
# CONFIG_BLK_DEV_DRBD is not set
CONFIG_BLK_DEV_NBD=m
CONFIG_BLK_DEV_SX8=m
# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=16384
# CONFIG_BLK_DEV_XIP is not set
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
CONFIG_ATA_OVER_ETH=m
CONFIG_XEN_BLKDEV_FRONTEND=m
CONFIG_VIRTIO_BLK=m
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_AD525X_DPOT is not set
# CONFIG_IBM_ASM is not set
# CONFIG_PHANTOM is not set
CONFIG_SGI_IOC4=m
CONFIG_TIFM_CORE=m
CONFIG_TIFM_7XX1=m
# CONFIG_ICS932S401 is not set
CONFIG_ENCLOSURE_SERVICES=m
# CONFIG_CS5535_MFGPT is not set
# CONFIG_HP_ILO is not set
# CONFIG_ISL29003 is not set
# CONFIG_DS1682 is not set
# CONFIG_C2PORT is not set
#
# EEPROM support
#
# CONFIG_EEPROM_AT24 is not set
# CONFIG_EEPROM_LEGACY is not set
# CONFIG_EEPROM_MAX6875 is not set
CONFIG_EEPROM_93CX6=m
# CONFIG_CB710_CORE is not set
# CONFIG_IWMC3200TOP is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
# SCSI device support
#
CONFIG_RAID_ATTRS=m
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
CONFIG_SCSI_TGT=m
CONFIG_SCSI_NETLINK=y
CONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_ST=m
CONFIG_CHR_DEV_OSST=m
CONFIG_BLK_DEV_SR=y
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=y
CONFIG_CHR_DEV_SCH=m
CONFIG_SCSI_ENCLOSURE=m
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
CONFIG_SCSI_SCAN_ASYNC=y
CONFIG_SCSI_WAIT_SCAN=m
#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=m
CONFIG_SCSI_FC_ATTRS=m
CONFIG_SCSI_FC_TGT_ATTRS=y
CONFIG_SCSI_ISCSI_ATTRS=m
CONFIG_SCSI_SAS_ATTRS=m
CONFIG_SCSI_SAS_LIBSAS=m
CONFIG_SCSI_SAS_ATA=y
CONFIG_SCSI_SAS_HOST_SMP=y
# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set
CONFIG_SCSI_SRP_ATTRS=m
CONFIG_SCSI_SRP_TGT_ATTRS=y
CONFIG_SCSI_LOWLEVEL=y
CONFIG_ISCSI_TCP=m
# CONFIG_SCSI_CXGB3_ISCSI is not set
# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_BE2ISCSI is not set
CONFIG_BLK_DEV_3W_XXXX_RAID=m
# CONFIG_SCSI_HPSA is not set
CONFIG_SCSI_3W_9XXX=m
# CONFIG_SCSI_3W_SAS is not set
CONFIG_SCSI_ACARD=m
CONFIG_SCSI_AACRAID=m
CONFIG_SCSI_AIC7XXX=m
CONFIG_AIC7XXX_CMDS_PER_DEVICE=4
CONFIG_AIC7XXX_RESET_DELAY_MS=15000
# CONFIG_AIC7XXX_DEBUG_ENABLE is not set
CONFIG_AIC7XXX_DEBUG_MASK=0
# CONFIG_AIC7XXX_REG_PRETTY_PRINT is not set
CONFIG_SCSI_AIC7XXX_OLD=m
CONFIG_SCSI_AIC79XX=m
CONFIG_AIC79XX_CMDS_PER_DEVICE=4
CONFIG_AIC79XX_RESET_DELAY_MS=15000
# CONFIG_AIC79XX_DEBUG_ENABLE is not set
CONFIG_AIC79XX_DEBUG_MASK=0
# CONFIG_AIC79XX_REG_PRETTY_PRINT is not set
CONFIG_SCSI_AIC94XX=m
# CONFIG_AIC94XX_DEBUG is not set
CONFIG_SCSI_MVSAS=m
CONFIG_SCSI_MVSAS_DEBUG=y
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
CONFIG_SCSI_ARCMSR=m
CONFIG_SCSI_ARCMSR_AER=y
CONFIG_MEGARAID_NEWGEN=y
CONFIG_MEGARAID_MM=m
CONFIG_MEGARAID_MAILBOX=m
CONFIG_MEGARAID_LEGACY=m
CONFIG_MEGARAID_SAS=m
# CONFIG_SCSI_MPT2SAS is not set
CONFIG_SCSI_HPTIOP=m
CONFIG_SCSI_BUSLOGIC=m
# CONFIG_VMWARE_PVSCSI is not set
# CONFIG_LIBFC is not set
# CONFIG_LIBFCOE is not set
# CONFIG_FCOE is not set
# CONFIG_FCOE_FNIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
CONFIG_SCSI_GDTH=m
CONFIG_SCSI_IPS=m
CONFIG_SCSI_INITIO=m
CONFIG_SCSI_INIA100=m
CONFIG_SCSI_PPA=m
CONFIG_SCSI_IMM=m
# CONFIG_SCSI_IZIP_EPP16 is not set
# CONFIG_SCSI_IZIP_SLOW_CTR is not set
CONFIG_SCSI_STEX=m
CONFIG_SCSI_SYM53C8XX_2=m
CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
CONFIG_SCSI_SYM53C8XX_MMIO=y
# CONFIG_SCSI_IPR is not set
CONFIG_SCSI_QLOGIC_1280=m
CONFIG_SCSI_QLA_FC=m
CONFIG_SCSI_QLA_ISCSI=m
CONFIG_SCSI_LPFC=m
# CONFIG_SCSI_LPFC_DEBUG_FS is not set
CONFIG_SCSI_DC395x=m
CONFIG_SCSI_DC390T=m
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_PMCRAID is not set
# CONFIG_SCSI_PM8001 is not set
CONFIG_SCSI_SRP=m
# CONFIG_SCSI_BFA_FC is not set
CONFIG_SCSI_LOWLEVEL_PCMCIA=y
# CONFIG_PCMCIA_FDOMAIN is not set
CONFIG_PCMCIA_QLOGIC=m
CONFIG_PCMCIA_SYM53C500=m
CONFIG_SCSI_DH=y
CONFIG_SCSI_DH_RDAC=m
CONFIG_SCSI_DH_HP_SW=m
CONFIG_SCSI_DH_EMC=m
CONFIG_SCSI_DH_ALUA=m
# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_ATA_VERBOSE_ERROR=y
CONFIG_ATA_ACPI=y
CONFIG_SATA_PMP=y
CONFIG_SATA_AHCI=y
CONFIG_SATA_SIL24=m
CONFIG_ATA_SFF=y
CONFIG_SATA_SVW=m
CONFIG_ATA_PIIX=m
CONFIG_SATA_MV=m
CONFIG_SATA_NV=m
CONFIG_PDC_ADMA=m
CONFIG_SATA_QSTOR=m
CONFIG_SATA_PROMISE=m
CONFIG_SATA_SX4=m
CONFIG_SATA_SIL=m
CONFIG_SATA_SIS=m
CONFIG_SATA_ULI=m
CONFIG_SATA_VIA=m
CONFIG_SATA_VITESSE=m
CONFIG_SATA_INIC162X=m
CONFIG_PATA_ACPI=m
CONFIG_PATA_ALI=m
CONFIG_PATA_AMD=m
CONFIG_PATA_ARTOP=m
# CONFIG_PATA_ATP867X is not set
CONFIG_PATA_ATIIXP=m
CONFIG_PATA_CMD640_PCI=m
CONFIG_PATA_CMD64X=m
CONFIG_PATA_CS5520=m
CONFIG_PATA_CS5530=m
CONFIG_PATA_CYPRESS=m
CONFIG_PATA_EFAR=m
CONFIG_ATA_GENERIC=m
CONFIG_PATA_HPT366=m
CONFIG_PATA_HPT37X=m
CONFIG_PATA_HPT3X2N=m
CONFIG_PATA_HPT3X3=m
CONFIG_PATA_HPT3X3_DMA=y
CONFIG_PATA_IT821X=m
CONFIG_PATA_IT8213=m
CONFIG_PATA_JMICRON=m
# CONFIG_PATA_LEGACY is not set
CONFIG_PATA_TRIFLEX=m
CONFIG_PATA_MARVELL=m
CONFIG_PATA_MPIIX=m
CONFIG_PATA_OLDPIIX=m
CONFIG_PATA_NETCELL=m
CONFIG_PATA_NINJA32=m
CONFIG_PATA_NS87410=m
CONFIG_PATA_NS87415=m
CONFIG_PATA_OPTI=m
CONFIG_PATA_OPTIDMA=m
CONFIG_PATA_PCMCIA=m
CONFIG_PATA_PDC2027X=m
CONFIG_PATA_PDC_OLD=m
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RDC is not set
# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_SC1200 is not set
CONFIG_PATA_SERVERWORKS=m
CONFIG_PATA_SIL680=m
CONFIG_PATA_SIS=m
# CONFIG_PATA_TOSHIBA is not set
CONFIG_PATA_VIA=m
CONFIG_PATA_WINBOND=m
CONFIG_PATA_SCH=m
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
CONFIG_MD_AUTODETECT=y
CONFIG_MD_LINEAR=m
CONFIG_MD_RAID0=m
CONFIG_MD_RAID1=m
CONFIG_MD_RAID10=m
CONFIG_MD_RAID456=m
# CONFIG_MULTICORE_RAID456 is not set
CONFIG_MD_RAID6_PQ=m
# CONFIG_ASYNC_RAID6_TEST is not set
CONFIG_MD_MULTIPATH=m
CONFIG_MD_FAULTY=m
CONFIG_BLK_DEV_DM=y
CONFIG_DM_DEBUG=y
CONFIG_DM_CRYPT=m
CONFIG_DM_SNAPSHOT=m
CONFIG_DM_MIRROR=m
# CONFIG_DM_LOG_USERSPACE is not set
CONFIG_DM_ZERO=m
CONFIG_DM_MULTIPATH=m
# CONFIG_DM_MULTIPATH_QL is not set
# CONFIG_DM_MULTIPATH_ST is not set
# CONFIG_DM_DELAY is not set
CONFIG_DM_UEVENT=y
CONFIG_FUSION=y
CONFIG_FUSION_SPI=m
CONFIG_FUSION_FC=m
CONFIG_FUSION_SAS=m
CONFIG_FUSION_MAX_SGE=40
CONFIG_FUSION_CTL=m
CONFIG_FUSION_LAN=m
CONFIG_FUSION_LOGGING=y
#
# IEEE 1394 (FireWire) support
#
#
# You can enable one or both FireWire driver stacks.
#
#
# The newer stack is recommended.
#
CONFIG_FIREWIRE=m
CONFIG_FIREWIRE_OHCI=m
CONFIG_FIREWIRE_OHCI_DEBUG=y
CONFIG_FIREWIRE_SBP2=m
# CONFIG_FIREWIRE_NET is not set
# CONFIG_IEEE1394 is not set
CONFIG_I2O=m
# CONFIG_I2O_LCT_NOTIFY_ON_CHANGES is not set
CONFIG_I2O_EXT_ADAPTEC=y
CONFIG_I2O_EXT_ADAPTEC_DMA64=y
CONFIG_I2O_CONFIG=m
CONFIG_I2O_CONFIG_OLD_IOCTL=y
CONFIG_I2O_BUS=m
CONFIG_I2O_BLOCK=m
CONFIG_I2O_SCSI=m
CONFIG_I2O_PROC=m
CONFIG_MACINTOSH_DRIVERS=y
CONFIG_MAC_EMUMOUSEBTN=y
CONFIG_NETDEVICES=y
CONFIG_IFB=m
CONFIG_DUMMY=m
CONFIG_BONDING=m
CONFIG_MACVLAN=m
# CONFIG_MACVTAP is not set
CONFIG_EQUALIZER=m
CONFIG_TUN=m
CONFIG_VETH=m
CONFIG_NET_SB1000=m
# CONFIG_ARCNET is not set
CONFIG_PHYLIB=m
#
# MII PHY device drivers
#
CONFIG_MARVELL_PHY=m
CONFIG_DAVICOM_PHY=m
CONFIG_QSEMI_PHY=m
CONFIG_LXT_PHY=m
CONFIG_CICADA_PHY=m
CONFIG_VITESSE_PHY=m
CONFIG_SMSC_PHY=m
CONFIG_BROADCOM_PHY=m
CONFIG_ICPLUS_PHY=m
CONFIG_REALTEK_PHY=m
# CONFIG_NATIONAL_PHY is not set
# CONFIG_STE10XP is not set
# CONFIG_LSI_ET1011C_PHY is not set
CONFIG_MDIO_BITBANG=m
CONFIG_NET_ETHERNET=y
CONFIG_MII=m
CONFIG_HAPPYMEAL=m
CONFIG_SUNGEM=m
CONFIG_CASSINI=m
CONFIG_NET_VENDOR_3COM=y
CONFIG_VORTEX=m
CONFIG_TYPHOON=m
# CONFIG_ETHOC is not set
# CONFIG_DNET is not set
CONFIG_NET_TULIP=y
CONFIG_DE2104X=m
CONFIG_DE2104X_DSL=0
CONFIG_TULIP=m
# CONFIG_TULIP_MWI is not set
CONFIG_TULIP_MMIO=y
# CONFIG_TULIP_NAPI is not set
CONFIG_DE4X5=m
CONFIG_WINBOND_840=m
CONFIG_DM9102=m
CONFIG_ULI526X=m
CONFIG_PCMCIA_XIRCOM=m
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
CONFIG_NET_PCI=y
CONFIG_PCNET32=m
CONFIG_AMD8111_ETH=m
CONFIG_ADAPTEC_STARFIRE=m
# CONFIG_KSZ884X_PCI is not set
CONFIG_B44=m
CONFIG_B44_PCI_AUTOSELECT=y
CONFIG_B44_PCICORE_AUTOSELECT=y
CONFIG_B44_PCI=y
CONFIG_FORCEDETH=m
CONFIG_FORCEDETH_NAPI=y
CONFIG_E100=m
CONFIG_FEALNX=m
CONFIG_NATSEMI=m
CONFIG_NE2K_PCI=m
CONFIG_8139CP=m
CONFIG_8139TOO=m
# CONFIG_8139TOO_PIO is not set
# CONFIG_8139TOO_TUNE_TWISTER is not set
CONFIG_8139TOO_8129=y
# CONFIG_8139_OLD_RX_RESET is not set
CONFIG_R6040=m
CONFIG_SIS900=m
CONFIG_EPIC100=m
# CONFIG_SMSC9420 is not set
CONFIG_SUNDANCE=m
# CONFIG_SUNDANCE_MMIO is not set
CONFIG_TLAN=m
# CONFIG_KS8842 is not set
# CONFIG_KS8851_MLL is not set
CONFIG_VIA_RHINE=m
CONFIG_VIA_RHINE_MMIO=y
CONFIG_SC92031=m
CONFIG_NET_POCKET=y
CONFIG_ATP=m
CONFIG_DE600=m
CONFIG_DE620=m
CONFIG_ATL2=m
CONFIG_NETDEV_1000=y
CONFIG_ACENIC=m
# CONFIG_ACENIC_OMIT_TIGON_I is not set
CONFIG_DL2K=m
CONFIG_E1000=m
CONFIG_E1000E=m
CONFIG_IP1000=m
CONFIG_IGB=m
CONFIG_IGB_DCA=y
# CONFIG_IGBVF is not set
CONFIG_NS83820=m
CONFIG_HAMACHI=m
CONFIG_YELLOWFIN=m
CONFIG_R8169=m
CONFIG_R8169_VLAN=y
CONFIG_SIS190=m
CONFIG_SKGE=m
# CONFIG_SKGE_DEBUG is not set
CONFIG_SKY2=m
# CONFIG_SKY2_DEBUG is not set
CONFIG_VIA_VELOCITY=m
CONFIG_TIGON3=m
CONFIG_BNX2=y
# CONFIG_CNIC is not set
CONFIG_QLA3XXX=m
CONFIG_ATL1=m
CONFIG_ATL1E=m
# CONFIG_ATL1C is not set
# CONFIG_JME is not set
CONFIG_NETDEV_10000=y
CONFIG_MDIO=m
CONFIG_CHELSIO_T1=m
CONFIG_CHELSIO_T1_1G=y
CONFIG_CHELSIO_T3_DEPENDS=y
CONFIG_CHELSIO_T3=m
# CONFIG_ENIC is not set
CONFIG_IXGBE=m
CONFIG_IXGBE_DCA=y
# CONFIG_IXGBEVF is not set
CONFIG_IXGB=m
CONFIG_S2IO=m
# CONFIG_VXGE is not set
CONFIG_MYRI10GE=m
CONFIG_MYRI10GE_DCA=y
CONFIG_NETXEN_NIC=m
CONFIG_NIU=m
# CONFIG_MLX4_EN is not set
CONFIG_MLX4_CORE=m
CONFIG_MLX4_DEBUG=y
CONFIG_TEHUTI=m
CONFIG_BNX2X=m
# CONFIG_QLCNIC is not set
# CONFIG_QLGE is not set
# CONFIG_SFC is not set
# CONFIG_BE2NET is not set
CONFIG_TR=y
CONFIG_IBMOL=m
CONFIG_3C359=m
# CONFIG_TMS380TR is not set
CONFIG_WLAN=y
# CONFIG_PCMCIA_RAYCS is not set
# CONFIG_LIBERTAS_THINFIRM is not set
CONFIG_AIRO=m
CONFIG_ATMEL=m
CONFIG_PCI_ATMEL=m
CONFIG_PCMCIA_ATMEL=m
# CONFIG_AT76C50X_USB is not set
CONFIG_AIRO_CS=m
CONFIG_PCMCIA_WL3501=m
CONFIG_PRISM54=m
CONFIG_USB_ZD1201=m
CONFIG_USB_NET_RNDIS_WLAN=m
CONFIG_RTL8180=m
CONFIG_RTL8187=m
CONFIG_RTL8187_LEDS=y
CONFIG_ADM8211=m
CONFIG_MAC80211_HWSIM=m
# CONFIG_MWL8K is not set
# CONFIG_ATH_COMMON is not set
CONFIG_B43=m
CONFIG_B43_PCI_AUTOSELECT=y
CONFIG_B43_PCICORE_AUTOSELECT=y
CONFIG_B43_PCMCIA=y
# CONFIG_B43_SDIO is not set
CONFIG_B43_PIO=y
CONFIG_B43_PHY_LP=y
CONFIG_B43_LEDS=y
CONFIG_B43_HWRNG=y
CONFIG_B43_DEBUG=y
# CONFIG_B43_FORCE_PIO is not set
CONFIG_B43LEGACY=m
CONFIG_B43LEGACY_PCI_AUTOSELECT=y
CONFIG_B43LEGACY_PCICORE_AUTOSELECT=y
CONFIG_B43LEGACY_LEDS=y
CONFIG_B43LEGACY_HWRNG=y
CONFIG_B43LEGACY_DEBUG=y
CONFIG_B43LEGACY_DMA=y
CONFIG_B43LEGACY_PIO=y
CONFIG_B43LEGACY_DMA_AND_PIO_MODE=y
# CONFIG_B43LEGACY_DMA_MODE is not set
# CONFIG_B43LEGACY_PIO_MODE is not set
CONFIG_HOSTAP=m
CONFIG_HOSTAP_FIRMWARE=y
CONFIG_HOSTAP_FIRMWARE_NVRAM=y
CONFIG_HOSTAP_PLX=m
CONFIG_HOSTAP_PCI=m
CONFIG_HOSTAP_CS=m
CONFIG_IPW2100=m
CONFIG_IPW2100_MONITOR=y
# CONFIG_IPW2100_DEBUG is not set
CONFIG_IPW2200=m
CONFIG_IPW2200_MONITOR=y
CONFIG_IPW2200_RADIOTAP=y
CONFIG_IPW2200_PROMISCUOUS=y
CONFIG_IPW2200_QOS=y
# CONFIG_IPW2200_DEBUG is not set
CONFIG_LIBIPW=m
# CONFIG_LIBIPW_DEBUG is not set
# CONFIG_IWLWIFI is not set
# CONFIG_IWM is not set
CONFIG_LIBERTAS=m
CONFIG_LIBERTAS_USB=m
CONFIG_LIBERTAS_CS=m
CONFIG_LIBERTAS_SDIO=m
CONFIG_LIBERTAS_DEBUG=y
# CONFIG_LIBERTAS_MESH is not set
CONFIG_HERMES=m
CONFIG_HERMES_CACHE_FW_ON_INIT=y
CONFIG_PLX_HERMES=m
CONFIG_TMD_HERMES=m
CONFIG_NORTEL_HERMES=m
CONFIG_PCI_HERMES=m
CONFIG_PCMCIA_HERMES=m
CONFIG_PCMCIA_SPECTRUM=m
CONFIG_P54_COMMON=m
CONFIG_P54_USB=m
CONFIG_P54_PCI=m
CONFIG_P54_LEDS=y
CONFIG_RT2X00=m
CONFIG_RT2400PCI=m
CONFIG_RT2500PCI=m
CONFIG_RT61PCI=m
CONFIG_RT2800PCI_PCI=y
# CONFIG_RT2800PCI is not set
CONFIG_RT2500USB=m
CONFIG_RT73USB=m
# CONFIG_RT2800USB is not set
CONFIG_RT2X00_LIB_PCI=m
CONFIG_RT2X00_LIB_USB=m
CONFIG_RT2X00_LIB=m
CONFIG_RT2X00_LIB_FIRMWARE=y
CONFIG_RT2X00_LIB_CRYPTO=y
CONFIG_RT2X00_LIB_LEDS=y
CONFIG_RT2X00_LIB_DEBUGFS=y
# CONFIG_RT2X00_DEBUG is not set
# CONFIG_WL12XX is not set
CONFIG_ZD1211RW=m
# CONFIG_ZD1211RW_DEBUG is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
#
#
# USB Network Adapters
#
CONFIG_USB_CATC=m
CONFIG_USB_KAWETH=m
CONFIG_USB_PEGASUS=m
CONFIG_USB_RTL8150=m
CONFIG_USB_USBNET=m
CONFIG_USB_NET_AX8817X=m
CONFIG_USB_NET_CDCETHER=m
# CONFIG_USB_NET_CDC_EEM is not set
CONFIG_USB_NET_DM9601=m
# CONFIG_USB_NET_SMSC95XX is not set
CONFIG_USB_NET_GL620A=m
CONFIG_USB_NET_NET1080=m
CONFIG_USB_NET_PLUSB=m
CONFIG_USB_NET_MCS7830=m
CONFIG_USB_NET_RNDIS_HOST=m
CONFIG_USB_NET_CDC_SUBSET=m
CONFIG_USB_ALI_M5632=y
CONFIG_USB_AN2720=y
CONFIG_USB_BELKIN=y
CONFIG_USB_ARMLINUX=y
CONFIG_USB_EPSON2888=y
CONFIG_USB_KC2190=y
CONFIG_USB_NET_ZAURUS=m
CONFIG_USB_HSO=m
# CONFIG_USB_NET_INT51X1 is not set
CONFIG_NET_PCMCIA=y
CONFIG_PCMCIA_3C589=m
CONFIG_PCMCIA_3C574=m
CONFIG_PCMCIA_FMVJ18X=m
CONFIG_PCMCIA_PCNET=m
CONFIG_PCMCIA_NMCLAN=m
CONFIG_PCMCIA_SMC91C92=m
CONFIG_PCMCIA_XIRC2PS=m
CONFIG_PCMCIA_AXNET=m
CONFIG_PCMCIA_IBMTR=m
# CONFIG_WAN is not set
CONFIG_ATM_DRIVERS=y
# CONFIG_ATM_DUMMY is not set
CONFIG_ATM_TCP=m
CONFIG_ATM_LANAI=m
CONFIG_ATM_ENI=m
# CONFIG_ATM_ENI_DEBUG is not set
# CONFIG_ATM_ENI_TUNE_BURST is not set
CONFIG_ATM_FIRESTREAM=m
# CONFIG_ATM_ZATM is not set
CONFIG_ATM_IDT77252=m
# CONFIG_ATM_IDT77252_DEBUG is not set
# CONFIG_ATM_IDT77252_RCV_ALL is not set
CONFIG_ATM_IDT77252_USE_SUNI=y
CONFIG_ATM_AMBASSADOR=m
# CONFIG_ATM_AMBASSADOR_DEBUG is not set
CONFIG_ATM_HORIZON=m
# CONFIG_ATM_HORIZON_DEBUG is not set
# CONFIG_ATM_IA is not set
CONFIG_ATM_FORE200E=m
# CONFIG_ATM_FORE200E_USE_TASKLET is not set
CONFIG_ATM_FORE200E_TX_RETRY=16
CONFIG_ATM_FORE200E_DEBUG=0
CONFIG_ATM_HE=m
# CONFIG_ATM_HE_USE_SUNI is not set
# CONFIG_ATM_SOLOS is not set
CONFIG_XEN_NETDEV_FRONTEND=m
CONFIG_FDDI=y
# CONFIG_DEFXX is not set
CONFIG_SKFP=m
# CONFIG_HIPPI is not set
CONFIG_PLIP=m
CONFIG_PPP=m
CONFIG_PPP_MULTILINK=y
CONFIG_PPP_FILTER=y
CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
CONFIG_PPP_DEFLATE=m
# CONFIG_PPP_BSDCOMP is not set
CONFIG_PPP_MPPE=m
CONFIG_PPPOE=m
CONFIG_PPPOATM=m
CONFIG_PPPOL2TP=m
CONFIG_SLIP=m
CONFIG_SLIP_COMPRESSED=y
CONFIG_SLHC=m
CONFIG_SLIP_SMART=y
# CONFIG_SLIP_MODE_SLIP6 is not set
CONFIG_NET_FC=y
CONFIG_NETCONSOLE=y
# CONFIG_NETCONSOLE_DYNAMIC is not set
CONFIG_NETPOLL=y
CONFIG_NETPOLL_TRAP=y
CONFIG_NET_POLL_CONTROLLER=y
CONFIG_VIRTIO_NET=m
# CONFIG_VMXNET3 is not set
CONFIG_ISDN=y
CONFIG_ISDN_I4L=m
CONFIG_ISDN_PPP=y
CONFIG_ISDN_PPP_VJ=y
CONFIG_ISDN_MPP=y
CONFIG_IPPP_FILTER=y
# CONFIG_ISDN_PPP_BSDCOMP is not set
CONFIG_ISDN_AUDIO=y
CONFIG_ISDN_TTY_FAX=y
#
# ISDN feature submodules
#
CONFIG_ISDN_DIVERSION=m
#
# ISDN4Linux hardware drivers
#
#
# Passive cards
#
CONFIG_ISDN_DRV_HISAX=m
#
# D-channel protocol features
#
CONFIG_HISAX_EURO=y
CONFIG_DE_AOC=y
CONFIG_HISAX_NO_SENDCOMPLETE=y
CONFIG_HISAX_NO_LLC=y
CONFIG_HISAX_NO_KEYPAD=y
CONFIG_HISAX_1TR6=y
CONFIG_HISAX_NI1=y
CONFIG_HISAX_MAX_CARDS=8
#
# HiSax supported cards
#
CONFIG_HISAX_16_3=y
CONFIG_HISAX_TELESPCI=y
CONFIG_HISAX_S0BOX=y
CONFIG_HISAX_FRITZPCI=y
CONFIG_HISAX_AVM_A1_PCMCIA=y
CONFIG_HISAX_ELSA=y
CONFIG_HISAX_DIEHLDIVA=y
CONFIG_HISAX_SEDLBAUER=y
CONFIG_HISAX_NETJET=y
CONFIG_HISAX_NETJET_U=y
CONFIG_HISAX_NICCY=y
CONFIG_HISAX_BKM_A4T=y
CONFIG_HISAX_SCT_QUADRO=y
CONFIG_HISAX_GAZEL=y
CONFIG_HISAX_HFC_PCI=y
CONFIG_HISAX_W6692=y
CONFIG_HISAX_HFC_SX=y
CONFIG_HISAX_ENTERNOW_PCI=y
# CONFIG_HISAX_DEBUG is not set
#
# HiSax PCMCIA card service modules
#
CONFIG_HISAX_SEDLBAUER_CS=m
CONFIG_HISAX_ELSA_CS=m
CONFIG_HISAX_AVM_A1_CS=m
CONFIG_HISAX_TELES_CS=m
#
# HiSax sub driver modules
#
CONFIG_HISAX_ST5481=m
# CONFIG_HISAX_HFCUSB is not set
CONFIG_HISAX_HFC4S8S=m
CONFIG_HISAX_FRITZ_PCIPNP=m
#
# Active cards
#
CONFIG_ISDN_CAPI=m
CONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON=y
# CONFIG_CAPI_TRACE is not set
CONFIG_ISDN_CAPI_MIDDLEWARE=y
CONFIG_ISDN_CAPI_CAPI20=m
CONFIG_ISDN_CAPI_CAPIFS_BOOL=y
CONFIG_ISDN_CAPI_CAPIFS=m
CONFIG_ISDN_CAPI_CAPIDRV=m
#
# CAPI hardware drivers
#
CONFIG_CAPI_AVM=y
CONFIG_ISDN_DRV_AVMB1_B1PCI=m
CONFIG_ISDN_DRV_AVMB1_B1PCIV4=y
CONFIG_ISDN_DRV_AVMB1_B1PCMCIA=m
CONFIG_ISDN_DRV_AVMB1_AVM_CS=m
CONFIG_ISDN_DRV_AVMB1_T1PCI=m
CONFIG_ISDN_DRV_AVMB1_C4=m
# CONFIG_CAPI_EICON is not set
CONFIG_ISDN_DRV_GIGASET=m
# CONFIG_GIGASET_CAPI is not set
CONFIG_GIGASET_I4L=y
# CONFIG_GIGASET_DUMMYLL is not set
CONFIG_GIGASET_BASE=m
CONFIG_GIGASET_M105=m
CONFIG_GIGASET_M101=m
# CONFIG_GIGASET_DEBUG is not set
CONFIG_HYSDN=m
CONFIG_HYSDN_CAPI=y
CONFIG_MISDN=m
CONFIG_MISDN_DSP=m
CONFIG_MISDN_L1OIP=m
#
# mISDN hardware drivers
#
CONFIG_MISDN_HFCPCI=m
CONFIG_MISDN_HFCMULTI=m
# CONFIG_MISDN_HFCUSB is not set
# CONFIG_MISDN_AVMFRITZ is not set
# CONFIG_MISDN_SPEEDFAX is not set
# CONFIG_MISDN_INFINEON is not set
# CONFIG_MISDN_W6692 is not set
# CONFIG_MISDN_NETJET is not set
CONFIG_ISDN_HDLC=m
# CONFIG_PHONE is not set
#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=y
CONFIG_INPUT_POLLDEV=m
CONFIG_INPUT_SPARSEKMAP=m
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_JOYDEV=m
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set
CONFIG_XEN_KBDDEV_FRONTEND=y
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ADP5588 is not set
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_QT2160 is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_LM8323 is not set
# CONFIG_KEYBOARD_MAX7359 is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_OPENCORES is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
# CONFIG_MOUSE_PS2_ELANTECH is not set
# CONFIG_MOUSE_PS2_SENTELIC is not set
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
CONFIG_MOUSE_SERIAL=m
CONFIG_MOUSE_APPLETOUCH=m
CONFIG_MOUSE_BCM5974=m
CONFIG_MOUSE_VSXXXAA=m
# CONFIG_MOUSE_SYNAPTICS_I2C is not set
CONFIG_INPUT_JOYSTICK=y
CONFIG_JOYSTICK_ANALOG=m
CONFIG_JOYSTICK_A3D=m
CONFIG_JOYSTICK_ADI=m
CONFIG_JOYSTICK_COBRA=m
CONFIG_JOYSTICK_GF2K=m
CONFIG_JOYSTICK_GRIP=m
CONFIG_JOYSTICK_GRIP_MP=m
CONFIG_JOYSTICK_GUILLEMOT=m
CONFIG_JOYSTICK_INTERACT=m
CONFIG_JOYSTICK_SIDEWINDER=m
CONFIG_JOYSTICK_TMDC=m
CONFIG_JOYSTICK_IFORCE=m
CONFIG_JOYSTICK_IFORCE_USB=y
CONFIG_JOYSTICK_IFORCE_232=y
CONFIG_JOYSTICK_WARRIOR=m
CONFIG_JOYSTICK_MAGELLAN=m
CONFIG_JOYSTICK_SPACEORB=m
CONFIG_JOYSTICK_SPACEBALL=m
CONFIG_JOYSTICK_STINGER=m
CONFIG_JOYSTICK_TWIDJOY=m
CONFIG_JOYSTICK_ZHENHUA=m
CONFIG_JOYSTICK_DB9=m
CONFIG_JOYSTICK_GAMECON=m
CONFIG_JOYSTICK_TURBOGRAFX=m
CONFIG_JOYSTICK_JOYDUMP=m
CONFIG_JOYSTICK_XPAD=m
CONFIG_JOYSTICK_XPAD_FF=y
CONFIG_JOYSTICK_XPAD_LEDS=y
# CONFIG_JOYSTICK_WALKERA0701 is not set
CONFIG_INPUT_TABLET=y
CONFIG_TABLET_USB_ACECAD=m
CONFIG_TABLET_USB_AIPTEK=m
CONFIG_TABLET_USB_GTCO=m
CONFIG_TABLET_USB_KBTAB=m
CONFIG_TABLET_USB_WACOM=m
CONFIG_INPUT_TOUCHSCREEN=y
# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
# CONFIG_TOUCHSCREEN_AD7879 is not set
# CONFIG_TOUCHSCREEN_DYNAPRO is not set
# CONFIG_TOUCHSCREEN_EETI is not set
CONFIG_TOUCHSCREEN_FUJITSU=m
CONFIG_TOUCHSCREEN_GUNZE=m
CONFIG_TOUCHSCREEN_ELO=m
# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
# CONFIG_TOUCHSCREEN_MCS5000 is not set
CONFIG_TOUCHSCREEN_MTOUCH=m
CONFIG_TOUCHSCREEN_INEXIO=m
CONFIG_TOUCHSCREEN_MK712=m
CONFIG_TOUCHSCREEN_PENMOUNT=m
CONFIG_TOUCHSCREEN_TOUCHRIGHT=m
CONFIG_TOUCHSCREEN_TOUCHWIN=m
# CONFIG_TOUCHSCREEN_WM97XX is not set
CONFIG_TOUCHSCREEN_USB_COMPOSITE=m
CONFIG_TOUCHSCREEN_USB_EGALAX=y
CONFIG_TOUCHSCREEN_USB_PANJIT=y
CONFIG_TOUCHSCREEN_USB_3M=y
CONFIG_TOUCHSCREEN_USB_ITM=y
CONFIG_TOUCHSCREEN_USB_ETURBO=y
CONFIG_TOUCHSCREEN_USB_GUNZE=y
CONFIG_TOUCHSCREEN_USB_DMC_TSC10=y
CONFIG_TOUCHSCREEN_USB_IRTOUCH=y
CONFIG_TOUCHSCREEN_USB_IDEALTEK=y
CONFIG_TOUCHSCREEN_USB_GENERAL_TOUCH=y
CONFIG_TOUCHSCREEN_USB_GOTOP=y
CONFIG_TOUCHSCREEN_USB_JASTEC=y
CONFIG_TOUCHSCREEN_USB_E2I=y
CONFIG_TOUCHSCREEN_USB_ZYTRONIC=y
CONFIG_TOUCHSCREEN_USB_ETT_TC5UH=y
CONFIG_TOUCHSCREEN_USB_NEXIO=y
CONFIG_TOUCHSCREEN_TOUCHIT213=m
# CONFIG_TOUCHSCREEN_TSC2007 is not set
CONFIG_INPUT_MISC=y
CONFIG_INPUT_PCSPKR=m
CONFIG_INPUT_APANEL=m
CONFIG_INPUT_ATLAS_BTNS=m
CONFIG_INPUT_ATI_REMOTE=m
CONFIG_INPUT_ATI_REMOTE2=m
CONFIG_INPUT_KEYSPAN_REMOTE=m
CONFIG_INPUT_POWERMATE=m
CONFIG_INPUT_YEALINK=m
# CONFIG_INPUT_CM109 is not set
CONFIG_INPUT_UINPUT=m
# CONFIG_INPUT_WINBOND_CIR is not set
#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PARKBD is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
CONFIG_SERIO_RAW=m
# CONFIG_SERIO_ALTERA_PS2 is not set
CONFIG_GAMEPORT=m
CONFIG_GAMEPORT_NS558=m
CONFIG_GAMEPORT_L4=m
CONFIG_GAMEPORT_EMU10K1=m
CONFIG_GAMEPORT_FM801=m
#
# Character devices
#
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
# CONFIG_DEVKMEM is not set
CONFIG_SERIAL_NONSTANDARD=y
# CONFIG_COMPUTONE is not set
CONFIG_ROCKETPORT=m
CONFIG_CYCLADES=m
# CONFIG_CYZ_INTR is not set
# CONFIG_DIGIEPCA is not set
# CONFIG_MOXA_INTELLIO is not set
# CONFIG_MOXA_SMARTIO is not set
# CONFIG_ISI is not set
CONFIG_SYNCLINK=m
CONFIG_SYNCLINKMP=m
CONFIG_SYNCLINK_GT=m
CONFIG_N_HDLC=m
# CONFIG_RISCOM8 is not set
# CONFIG_SPECIALIX is not set
# CONFIG_STALDRV is not set
CONFIG_NOZOMI=m
#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_PNP=y
CONFIG_SERIAL_8250_CS=m
CONFIG_SERIAL_8250_NR_UARTS=32
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
CONFIG_SERIAL_8250_DETECT_IRQ=y
CONFIG_SERIAL_8250_RSA=y
#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_CONSOLE_POLL=y
CONFIG_SERIAL_JSM=m
# CONFIG_SERIAL_TIMBERDALE is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
CONFIG_PRINTER=m
CONFIG_LP_CONSOLE=y
CONFIG_PPDEV=m
CONFIG_HVC_DRIVER=y
CONFIG_HVC_IRQ=y
CONFIG_HVC_XEN=y
CONFIG_VIRTIO_CONSOLE=m
CONFIG_IPMI_HANDLER=m
# CONFIG_IPMI_PANIC_EVENT is not set
CONFIG_IPMI_DEVICE_INTERFACE=m
CONFIG_IPMI_SI=m
CONFIG_IPMI_WATCHDOG=m
CONFIG_IPMI_POWEROFF=m
CONFIG_HW_RANDOM=y
# CONFIG_HW_RANDOM_TIMERIOMEM is not set
CONFIG_HW_RANDOM_INTEL=m
CONFIG_HW_RANDOM_AMD=m
CONFIG_HW_RANDOM_VIA=y
CONFIG_HW_RANDOM_VIRTIO=m
CONFIG_NVRAM=y
CONFIG_R3964=m
# CONFIG_APPLICOM is not set
#
# PCMCIA character devices
#
# CONFIG_SYNCLINK_CS is not set
CONFIG_CARDMAN_4000=m
CONFIG_CARDMAN_4040=m
CONFIG_IPWIRELESS=m
CONFIG_MWAVE=m
# CONFIG_PC8736x_GPIO is not set
CONFIG_RAW_DRIVER=y
CONFIG_MAX_RAW_DEVS=8192
CONFIG_HPET=y
# CONFIG_HPET_MMAP is not set
CONFIG_HANGCHECK_TIMER=m
CONFIG_TCG_TPM=m
CONFIG_TCG_TIS=m
CONFIG_TCG_NSC=m
CONFIG_TCG_ATMEL=m
CONFIG_TCG_INFINEON=m
CONFIG_TELCLOCK=m
CONFIG_DEVPORT=y
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=m
CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_SMBUS=m
CONFIG_I2C_ALGOBIT=y
CONFIG_I2C_ALGOPCA=m
#
# I2C Hardware Bus support
#
#
# PC SMBus host controller drivers
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
CONFIG_I2C_AMD756=m
CONFIG_I2C_AMD756_S4882=m
CONFIG_I2C_AMD8111=m
CONFIG_I2C_I801=m
CONFIG_I2C_ISCH=m
CONFIG_I2C_PIIX4=m
CONFIG_I2C_NFORCE2=m
CONFIG_I2C_NFORCE2_S4985=m
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
CONFIG_I2C_SIS96X=m
CONFIG_I2C_VIA=m
CONFIG_I2C_VIAPRO=m
#
# ACPI drivers
#
# CONFIG_I2C_SCMI is not set
#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
# CONFIG_I2C_OCORES is not set
CONFIG_I2C_SIMTEC=m
# CONFIG_I2C_XILINX is not set
#
# External I2C/SMBus adapter drivers
#
CONFIG_I2C_PARPORT=m
CONFIG_I2C_PARPORT_LIGHT=m
# CONFIG_I2C_TAOS_EVM is not set
CONFIG_I2C_TINY_USB=m
#
# Other I2C/SMBus bus drivers
#
CONFIG_I2C_PCA_PLATFORM=m
CONFIG_I2C_STUB=m
#
# Miscellaneous I2C Chip support
#
CONFIG_SENSORS_TSL2550=m
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
#
# PPS support
#
# CONFIG_PPS is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_GPIOLIB is not set
CONFIG_W1=m
CONFIG_W1_CON=y
#
# 1-wire Bus Masters
#
# CONFIG_W1_MASTER_MATROX is not set
CONFIG_W1_MASTER_DS2490=m
CONFIG_W1_MASTER_DS2482=m
#
# 1-wire Slaves
#
CONFIG_W1_SLAVE_THERM=m
CONFIG_W1_SLAVE_SMEM=m
# CONFIG_W1_SLAVE_DS2431 is not set
CONFIG_W1_SLAVE_DS2433=m
CONFIG_W1_SLAVE_DS2433_CRC=y
CONFIG_W1_SLAVE_DS2760=m
# CONFIG_W1_SLAVE_BQ27000 is not set
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
# CONFIG_PDA_POWER is not set
# CONFIG_BATTERY_DS2760 is not set
# CONFIG_BATTERY_DS2782 is not set
# CONFIG_BATTERY_BQ27x00 is not set
# CONFIG_BATTERY_MAX17040 is not set
CONFIG_HWMON=m
CONFIG_HWMON_VID=m
# CONFIG_HWMON_DEBUG_CHIP is not set
#
# Native drivers
#
CONFIG_SENSORS_ABITUGURU=m
CONFIG_SENSORS_ABITUGURU3=m
CONFIG_SENSORS_AD7414=m
CONFIG_SENSORS_AD7418=m
CONFIG_SENSORS_ADM1021=m
CONFIG_SENSORS_ADM1025=m
CONFIG_SENSORS_ADM1026=m
CONFIG_SENSORS_ADM1029=m
CONFIG_SENSORS_ADM1031=m
CONFIG_SENSORS_ADM9240=m
# CONFIG_SENSORS_ADT7411 is not set
# CONFIG_SENSORS_ADT7462 is not set
CONFIG_SENSORS_ADT7470=m
# CONFIG_SENSORS_ADT7475 is not set
# CONFIG_SENSORS_ASC7621 is not set
CONFIG_SENSORS_K8TEMP=m
# CONFIG_SENSORS_K10TEMP is not set
CONFIG_SENSORS_ASB100=m
CONFIG_SENSORS_ATXP1=m
CONFIG_SENSORS_DS1621=m
CONFIG_SENSORS_I5K_AMB=m
CONFIG_SENSORS_F71805F=m
CONFIG_SENSORS_F71882FG=m
CONFIG_SENSORS_F75375S=m
CONFIG_SENSORS_FSCHMD=m
# CONFIG_SENSORS_G760A is not set
CONFIG_SENSORS_GL518SM=m
CONFIG_SENSORS_GL520SM=m
CONFIG_SENSORS_CORETEMP=m
CONFIG_SENSORS_IBMAEM=m
CONFIG_SENSORS_IBMPEX=m
CONFIG_SENSORS_IT87=m
CONFIG_SENSORS_LM63=m
# CONFIG_SENSORS_LM73 is not set
CONFIG_SENSORS_LM75=m
CONFIG_SENSORS_LM77=m
CONFIG_SENSORS_LM78=m
CONFIG_SENSORS_LM80=m
CONFIG_SENSORS_LM83=m
CONFIG_SENSORS_LM85=m
CONFIG_SENSORS_LM87=m
CONFIG_SENSORS_LM90=m
CONFIG_SENSORS_LM92=m
CONFIG_SENSORS_LM93=m
# CONFIG_SENSORS_LTC4215 is not set
# CONFIG_SENSORS_LTC4245 is not set
# CONFIG_SENSORS_LM95241 is not set
CONFIG_SENSORS_MAX1619=m
CONFIG_SENSORS_MAX6650=m
CONFIG_SENSORS_PC87360=m
CONFIG_SENSORS_PC87427=m
CONFIG_SENSORS_PCF8591=m
CONFIG_SENSORS_SIS5595=m
CONFIG_SENSORS_DME1737=m
CONFIG_SENSORS_SMSC47M1=m
CONFIG_SENSORS_SMSC47M192=m
CONFIG_SENSORS_SMSC47B397=m
CONFIG_SENSORS_ADS7828=m
# CONFIG_SENSORS_AMC6821 is not set
CONFIG_SENSORS_THMC50=m
# CONFIG_SENSORS_TMP401 is not set
# CONFIG_SENSORS_TMP421 is not set
# CONFIG_SENSORS_VIA_CPUTEMP is not set
CONFIG_SENSORS_VIA686A=m
CONFIG_SENSORS_VT1211=m
CONFIG_SENSORS_VT8231=m
CONFIG_SENSORS_W83781D=m
CONFIG_SENSORS_W83791D=m
CONFIG_SENSORS_W83792D=m
CONFIG_SENSORS_W83793=m
CONFIG_SENSORS_W83L785TS=m
CONFIG_SENSORS_W83L786NG=m
CONFIG_SENSORS_W83627HF=m
CONFIG_SENSORS_W83627EHF=m
CONFIG_SENSORS_HDAPS=m
# CONFIG_SENSORS_LIS3_I2C is not set
CONFIG_SENSORS_APPLESMC=m
#
# ACPI drivers
#
# CONFIG_SENSORS_ATK0110 is not set
# CONFIG_SENSORS_LIS3LV02D is not set
CONFIG_THERMAL=y
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
#
# Watchdog Device Drivers
#
CONFIG_SOFT_WATCHDOG=m
# CONFIG_MAX63XX_WATCHDOG is not set
# CONFIG_ACQUIRE_WDT is not set
# CONFIG_ADVANTECH_WDT is not set
CONFIG_ALIM1535_WDT=m
CONFIG_ALIM7101_WDT=m
# CONFIG_SC520_WDT is not set
# CONFIG_SBC_FITPC2_WATCHDOG is not set
# CONFIG_EUROTECH_WDT is not set
# CONFIG_IB700_WDT is not set
CONFIG_IBMASR=m
# CONFIG_WAFER_WDT is not set
CONFIG_I6300ESB_WDT=m
CONFIG_ITCO_WDT=m
CONFIG_ITCO_VENDOR_SUPPORT=y
CONFIG_IT8712F_WDT=m
# CONFIG_IT87_WDT is not set
# CONFIG_HP_WATCHDOG is not set
# CONFIG_SC1200_WDT is not set
# CONFIG_PC87413_WDT is not set
# CONFIG_60XX_WDT is not set
# CONFIG_SBC8360_WDT is not set
# CONFIG_CPU5_WDT is not set
# CONFIG_SMSC_SCH311X_WDT is not set
# CONFIG_SMSC37B787_WDT is not set
CONFIG_W83627HF_WDT=m
CONFIG_W83697HF_WDT=m
# CONFIG_W83697UG_WDT is not set
CONFIG_W83877F_WDT=m
CONFIG_W83977F_WDT=m
CONFIG_MACHZ_WDT=m
# CONFIG_SBC_EPX_C3_WATCHDOG is not set
#
# PCI-based Watchdog Cards
#
CONFIG_PCIPCWATCHDOG=m
CONFIG_WDTPCI=m
#
# USB-based Watchdog Cards
#
CONFIG_USBPCWATCHDOG=m
CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
CONFIG_SSB=m
CONFIG_SSB_SPROM=y
CONFIG_SSB_BLOCKIO=y
CONFIG_SSB_PCIHOST_POSSIBLE=y
CONFIG_SSB_PCIHOST=y
CONFIG_SSB_B43_PCI_BRIDGE=y
CONFIG_SSB_PCMCIAHOST_POSSIBLE=y
CONFIG_SSB_PCMCIAHOST=y
CONFIG_SSB_SDIOHOST_POSSIBLE=y
# CONFIG_SSB_SDIOHOST is not set
# CONFIG_SSB_DEBUG is not set
CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
CONFIG_SSB_DRIVER_PCICORE=y
#
# Multifunction device drivers
#
CONFIG_MFD_CORE=m
# CONFIG_MFD_88PM860X is not set
CONFIG_MFD_SM501=m
# CONFIG_HTC_PASIC3 is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_MAX8925 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_WM8994 is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
CONFIG_LPC_SCH=m
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
#
CONFIG_AGP=y
CONFIG_AGP_AMD64=y
CONFIG_AGP_INTEL=y
CONFIG_AGP_SIS=y
CONFIG_AGP_VIA=y
CONFIG_VGA_ARB=y
CONFIG_VGA_ARB_MAX_GPUS=16
# CONFIG_VGA_SWITCHEROO is not set
CONFIG_DRM=y
CONFIG_DRM_KMS_HELPER=m
CONFIG_DRM_TTM=m
CONFIG_DRM_TDFX=m
CONFIG_DRM_R128=m
CONFIG_DRM_RADEON=m
# CONFIG_DRM_RADEON_KMS is not set
CONFIG_DRM_I810=m
CONFIG_DRM_I830=m
CONFIG_DRM_I915=m
# CONFIG_DRM_I915_KMS is not set
CONFIG_DRM_MGA=m
CONFIG_DRM_SIS=m
CONFIG_DRM_VIA=m
CONFIG_DRM_SAVAGE=m
CONFIG_VGASTATE=m
CONFIG_VIDEO_OUTPUT_CONTROL=m
CONFIG_FB=y
# CONFIG_FIRMWARE_EDID is not set
CONFIG_FB_DDC=m
CONFIG_FB_BOOT_VESA_SUPPORT=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
CONFIG_FB_SYS_FILLRECT=y
CONFIG_FB_SYS_COPYAREA=y
CONFIG_FB_SYS_IMAGEBLIT=y
# CONFIG_FB_FOREIGN_ENDIAN is not set
CONFIG_FB_SYS_FOPS=y
CONFIG_FB_DEFERRED_IO=y
CONFIG_FB_SVGALIB=m
# CONFIG_FB_MACMODES is not set
CONFIG_FB_BACKLIGHT=y
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y
#
# Frame buffer hardware drivers
#
CONFIG_FB_CIRRUS=m
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ARC is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
CONFIG_FB_VGA16=m
# CONFIG_FB_UVESA is not set
CONFIG_FB_VESA=y
CONFIG_FB_EFI=y
# CONFIG_FB_N411 is not set
# CONFIG_FB_HGA is not set
# CONFIG_FB_S1D13XXX is not set
CONFIG_FB_NVIDIA=m
CONFIG_FB_NVIDIA_I2C=y
# CONFIG_FB_NVIDIA_DEBUG is not set
CONFIG_FB_NVIDIA_BACKLIGHT=y
CONFIG_FB_RIVA=m
# CONFIG_FB_RIVA_I2C is not set
# CONFIG_FB_RIVA_DEBUG is not set
CONFIG_FB_RIVA_BACKLIGHT=y
# CONFIG_FB_LE80578 is not set
CONFIG_FB_MATROX=m
CONFIG_FB_MATROX_MILLENIUM=y
CONFIG_FB_MATROX_MYSTIQUE=y
CONFIG_FB_MATROX_G=y
CONFIG_FB_MATROX_I2C=m
CONFIG_FB_MATROX_MAVEN=m
CONFIG_FB_RADEON=m
CONFIG_FB_RADEON_I2C=y
CONFIG_FB_RADEON_BACKLIGHT=y
# CONFIG_FB_RADEON_DEBUG is not set
CONFIG_FB_ATY128=m
CONFIG_FB_ATY128_BACKLIGHT=y
CONFIG_FB_ATY=m
CONFIG_FB_ATY_CT=y
CONFIG_FB_ATY_GENERIC_LCD=y
CONFIG_FB_ATY_GX=y
CONFIG_FB_ATY_BACKLIGHT=y
CONFIG_FB_S3=m
CONFIG_FB_SAVAGE=m
CONFIG_FB_SAVAGE_I2C=y
CONFIG_FB_SAVAGE_ACCEL=y
# CONFIG_FB_SIS is not set
# CONFIG_FB_VIA is not set
CONFIG_FB_NEOMAGIC=m
CONFIG_FB_KYRO=m
CONFIG_FB_3DFX=m
CONFIG_FB_3DFX_ACCEL=y
CONFIG_FB_3DFX_I2C=y
CONFIG_FB_VOODOO1=m
# CONFIG_FB_VT8623 is not set
CONFIG_FB_TRIDENT=m
# CONFIG_FB_ARK is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_CARMINE is not set
# CONFIG_FB_GEODE is not set
# CONFIG_FB_TMIO is not set
CONFIG_FB_SM501=m
# CONFIG_FB_VIRTUAL is not set
CONFIG_XEN_FBDEV_FRONTEND=y
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_MB862XX is not set
# CONFIG_FB_BROADSHEET is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=m
# CONFIG_LCD_ILI9320 is not set
CONFIG_LCD_PLATFORM=m
CONFIG_BACKLIGHT_CLASS_DEVICE=y
CONFIG_BACKLIGHT_GENERIC=y
CONFIG_BACKLIGHT_PROGEAR=m
CONFIG_BACKLIGHT_MBP_NVIDIA=m
# CONFIG_BACKLIGHT_SAHARA is not set
#
# Display device support
#
CONFIG_DISPLAY_SUPPORT=m
#
# Display hardware drivers
#
#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
CONFIG_VGACON_SOFT_SCROLLBACK=y
CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
CONFIG_LOGO_LINUX_CLUT224=y
CONFIG_SOUND=m
CONFIG_SOUND_OSS_CORE=y
CONFIG_SOUND_OSS_CORE_PRECLAIM=y
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
CONFIG_SND_HWDEP=m
CONFIG_SND_RAWMIDI=m
CONFIG_SND_SEQUENCER=m
CONFIG_SND_SEQ_DUMMY=m
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
CONFIG_SND_PCM_OSS_PLUGINS=y
CONFIG_SND_SEQUENCER_OSS=y
# CONFIG_SND_HRTIMER is not set
# CONFIG_SND_DYNAMIC_MINORS is not set
# CONFIG_SND_SUPPORT_OLD_API is not set
CONFIG_SND_VERBOSE_PROCFS=y
CONFIG_SND_VERBOSE_PRINTK=y
CONFIG_SND_DEBUG=y
# CONFIG_SND_DEBUG_VERBOSE is not set
CONFIG_SND_PCM_XRUN_DEBUG=y
CONFIG_SND_VMASTER=y
CONFIG_SND_DMA_SGBUF=y
CONFIG_SND_RAWMIDI_SEQ=m
CONFIG_SND_OPL3_LIB_SEQ=m
# CONFIG_SND_OPL4_LIB_SEQ is not set
# CONFIG_SND_SBAWE_SEQ is not set
CONFIG_SND_EMU10K1_SEQ=m
CONFIG_SND_MPU401_UART=m
CONFIG_SND_OPL3_LIB=m
CONFIG_SND_VX_LIB=m
CONFIG_SND_AC97_CODEC=m
CONFIG_SND_DRIVERS=y
CONFIG_SND_PCSP=m
CONFIG_SND_DUMMY=m
CONFIG_SND_VIRMIDI=m
CONFIG_SND_MTPAV=m
CONFIG_SND_MTS64=m
CONFIG_SND_SERIAL_U16550=m
CONFIG_SND_MPU401=m
CONFIG_SND_PORTMAN2X4=m
CONFIG_SND_AC97_POWER_SAVE=y
CONFIG_SND_AC97_POWER_SAVE_DEFAULT=5
CONFIG_SND_SB_COMMON=m
CONFIG_SND_SB16_DSP=m
CONFIG_SND_PCI=y
CONFIG_SND_AD1889=m
CONFIG_SND_ALS300=m
CONFIG_SND_ALS4000=m
CONFIG_SND_ALI5451=m
CONFIG_SND_ATIIXP=m
CONFIG_SND_ATIIXP_MODEM=m
CONFIG_SND_AU8810=m
CONFIG_SND_AU8820=m
CONFIG_SND_AU8830=m
# CONFIG_SND_AW2 is not set
CONFIG_SND_AZT3328=m
CONFIG_SND_BT87X=m
# CONFIG_SND_BT87X_OVERCLOCK is not set
CONFIG_SND_CA0106=m
CONFIG_SND_CMIPCI=m
CONFIG_SND_OXYGEN_LIB=m
CONFIG_SND_OXYGEN=m
CONFIG_SND_CS4281=m
CONFIG_SND_CS46XX=m
CONFIG_SND_CS46XX_NEW_DSP=y
CONFIG_SND_CS5530=m
# CONFIG_SND_CS5535AUDIO is not set
# CONFIG_SND_CTXFI is not set
CONFIG_SND_DARLA20=m
CONFIG_SND_GINA20=m
CONFIG_SND_LAYLA20=m
CONFIG_SND_DARLA24=m
CONFIG_SND_GINA24=m
CONFIG_SND_LAYLA24=m
CONFIG_SND_MONA=m
CONFIG_SND_MIA=m
CONFIG_SND_ECHO3G=m
CONFIG_SND_INDIGO=m
CONFIG_SND_INDIGOIO=m
CONFIG_SND_INDIGODJ=m
# CONFIG_SND_INDIGOIOX is not set
# CONFIG_SND_INDIGODJX is not set
CONFIG_SND_EMU10K1=m
CONFIG_SND_EMU10K1X=m
CONFIG_SND_ENS1370=m
CONFIG_SND_ENS1371=m
CONFIG_SND_ES1938=m
CONFIG_SND_ES1968=m
CONFIG_SND_FM801=m
CONFIG_SND_HDA_INTEL=m
CONFIG_SND_HDA_HWDEP=y
# CONFIG_SND_HDA_RECONFIG is not set
# CONFIG_SND_HDA_INPUT_BEEP is not set
# CONFIG_SND_HDA_INPUT_JACK is not set
# CONFIG_SND_HDA_PATCH_LOADER is not set
CONFIG_SND_HDA_CODEC_REALTEK=y
CONFIG_SND_HDA_CODEC_ANALOG=y
CONFIG_SND_HDA_CODEC_SIGMATEL=y
CONFIG_SND_HDA_CODEC_VIA=y
CONFIG_SND_HDA_CODEC_ATIHDMI=y
CONFIG_SND_HDA_CODEC_NVHDMI=y
CONFIG_SND_HDA_CODEC_INTELHDMI=y
CONFIG_SND_HDA_ELD=y
CONFIG_SND_HDA_CODEC_CIRRUS=y
CONFIG_SND_HDA_CODEC_CONEXANT=y
CONFIG_SND_HDA_CODEC_CA0110=y
CONFIG_SND_HDA_CODEC_CMEDIA=y
CONFIG_SND_HDA_CODEC_SI3054=y
CONFIG_SND_HDA_GENERIC=y
CONFIG_SND_HDA_POWER_SAVE=y
CONFIG_SND_HDA_POWER_SAVE_DEFAULT=5
CONFIG_SND_HDSP=m
CONFIG_SND_HDSPM=m
CONFIG_SND_HIFIER=m
CONFIG_SND_ICE1712=m
CONFIG_SND_ICE1724=m
CONFIG_SND_INTEL8X0=m
CONFIG_SND_INTEL8X0M=m
CONFIG_SND_KORG1212=m
# CONFIG_SND_LX6464ES is not set
CONFIG_SND_MAESTRO3=m
CONFIG_SND_MIXART=m
CONFIG_SND_NM256=m
CONFIG_SND_PCXHR=m
CONFIG_SND_RIPTIDE=m
CONFIG_SND_RME32=m
CONFIG_SND_RME96=m
CONFIG_SND_RME9652=m
CONFIG_SND_SONICVIBES=m
CONFIG_SND_TRIDENT=m
CONFIG_SND_VIA82XX=m
CONFIG_SND_VIA82XX_MODEM=m
CONFIG_SND_VIRTUOSO=m
CONFIG_SND_VX222=m
CONFIG_SND_YMFPCI=m
CONFIG_SND_USB=y
CONFIG_SND_USB_AUDIO=m
# CONFIG_SND_USB_UA101 is not set
CONFIG_SND_USB_USX2Y=m
CONFIG_SND_USB_CAIAQ=m
CONFIG_SND_USB_CAIAQ_INPUT=y
# CONFIG_SND_USB_US122L is not set
# CONFIG_SND_PCMCIA is not set
# CONFIG_SND_SOC is not set
# CONFIG_SOUND_PRIME is not set
CONFIG_AC97_BUS=m
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
CONFIG_HIDRAW=y
#
# USB Input Devices
#
CONFIG_USB_HID=y
CONFIG_HID_PID=y
CONFIG_USB_HIDDEV=y
#
# Special HID drivers
#
# CONFIG_HID_3M_PCT is not set
CONFIG_HID_A4TECH=y
CONFIG_HID_APPLE=y
CONFIG_HID_BELKIN=y
CONFIG_HID_CHERRY=y
CONFIG_HID_CHICONY=y
CONFIG_HID_CYPRESS=y
CONFIG_HID_DRAGONRISE=y
# CONFIG_DRAGONRISE_FF is not set
CONFIG_HID_EZKEY=y
CONFIG_HID_KYE=y
CONFIG_HID_GYRATION=y
CONFIG_HID_TWINHAN=y
CONFIG_HID_KENSINGTON=y
CONFIG_HID_LOGITECH=y
CONFIG_LOGITECH_FF=y
CONFIG_LOGIRUMBLEPAD2_FF=y
# CONFIG_LOGIG940_FF is not set
# CONFIG_HID_MAGICMOUSE is not set
CONFIG_HID_MICROSOFT=y
# CONFIG_HID_MOSART is not set
CONFIG_HID_MONTEREY=y
CONFIG_HID_NTRIG=y
CONFIG_HID_ORTEK=y
CONFIG_HID_PANTHERLORD=y
CONFIG_PANTHERLORD_FF=y
CONFIG_HID_PETALYNX=y
# CONFIG_HID_QUANTA is not set
CONFIG_HID_SAMSUNG=y
CONFIG_HID_SONY=y
# CONFIG_HID_STANTUM is not set
CONFIG_HID_SUNPLUS=y
CONFIG_HID_GREENASIA=y
# CONFIG_GREENASIA_FF is not set
CONFIG_HID_SMARTJOYPLUS=y
# CONFIG_SMARTJOYPLUS_FF is not set
CONFIG_HID_TOPSEED=y
CONFIG_HID_THRUSTMASTER=y
CONFIG_THRUSTMASTER_FF=y
# CONFIG_HID_WACOM is not set
CONFIG_HID_ZEROPLUS=y
CONFIG_ZEROPLUS_FF=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_DEVICE_CLASS is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_OTG is not set
CONFIG_USB_MON=y
# CONFIG_USB_WUSB is not set
# CONFIG_USB_WUSB_CBAF is not set
#
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
# CONFIG_USB_XHCI_HCD is not set
CONFIG_USB_EHCI_HCD=m
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_EHCI_TT_NEWSCHED=y
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
# CONFIG_USB_ISP1362_HCD is not set
CONFIG_USB_OHCI_HCD=m
# CONFIG_USB_OHCI_HCD_SSB is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_UHCI_HCD=m
CONFIG_USB_U132_HCD=m
CONFIG_USB_SL811_HCD=m
# CONFIG_USB_SL811_CS is not set
# CONFIG_USB_R8A66597_HCD is not set
# CONFIG_USB_WHCI_HCD is not set
# CONFIG_USB_HWA_HCD is not set
#
# USB Device Class drivers
#
CONFIG_USB_ACM=m
CONFIG_USB_PRINTER=m
CONFIG_USB_WDM=m
# CONFIG_USB_TMC is not set
#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
#
# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
CONFIG_USB_STORAGE_DATAFAB=m
CONFIG_USB_STORAGE_FREECOM=m
CONFIG_USB_STORAGE_ISD200=m
CONFIG_USB_STORAGE_USBAT=m
CONFIG_USB_STORAGE_SDDR09=m
CONFIG_USB_STORAGE_SDDR55=m
CONFIG_USB_STORAGE_JUMPSHOT=m
CONFIG_USB_STORAGE_ALAUDA=m
CONFIG_USB_STORAGE_ONETOUCH=m
CONFIG_USB_STORAGE_KARMA=m
CONFIG_USB_STORAGE_CYPRESS_ATACB=m
# CONFIG_USB_LIBUSUAL is not set
#
# USB Imaging devices
#
CONFIG_USB_MDC800=m
CONFIG_USB_MICROTEK=m
#
# USB port drivers
#
CONFIG_USB_USS720=m
CONFIG_USB_SERIAL=m
CONFIG_USB_EZUSB=y
CONFIG_USB_SERIAL_GENERIC=y
CONFIG_USB_SERIAL_AIRCABLE=m
CONFIG_USB_SERIAL_ARK3116=m
CONFIG_USB_SERIAL_BELKIN=m
CONFIG_USB_SERIAL_CH341=m
CONFIG_USB_SERIAL_WHITEHEAT=m
CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
# CONFIG_USB_SERIAL_CP210X is not set
CONFIG_USB_SERIAL_CYPRESS_M8=m
CONFIG_USB_SERIAL_EMPEG=m
CONFIG_USB_SERIAL_FTDI_SIO=m
CONFIG_USB_SERIAL_FUNSOFT=m
CONFIG_USB_SERIAL_VISOR=m
CONFIG_USB_SERIAL_IPAQ=m
CONFIG_USB_SERIAL_IR=m
CONFIG_USB_SERIAL_EDGEPORT=m
CONFIG_USB_SERIAL_EDGEPORT_TI=m
# CONFIG_USB_SERIAL_GARMIN is not set
CONFIG_USB_SERIAL_IPW=m
CONFIG_USB_SERIAL_IUU=m
CONFIG_USB_SERIAL_KEYSPAN_PDA=m
CONFIG_USB_SERIAL_KEYSPAN=m
# CONFIG_USB_SERIAL_KEYSPAN_MPR is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA28 is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA28X is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA28XA is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA28XB is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA19 is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA18X is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA19W is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA19QW is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA19QI is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA49W is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA49WLC is not set
CONFIG_USB_SERIAL_KLSI=m
CONFIG_USB_SERIAL_KOBIL_SCT=m
CONFIG_USB_SERIAL_MCT_U232=m
CONFIG_USB_SERIAL_MOS7720=m
CONFIG_USB_SERIAL_MOS7840=m
CONFIG_USB_SERIAL_MOTOROLA=m
CONFIG_USB_SERIAL_NAVMAN=m
CONFIG_USB_SERIAL_PL2303=m
CONFIG_USB_SERIAL_OTI6858=m
# CONFIG_USB_SERIAL_QCAUX is not set
# CONFIG_USB_SERIAL_QUALCOMM is not set
CONFIG_USB_SERIAL_SPCP8X5=m
CONFIG_USB_SERIAL_HP4X=m
CONFIG_USB_SERIAL_SAFE=m
CONFIG_USB_SERIAL_SAFE_PADDED=y
# CONFIG_USB_SERIAL_SIEMENS_MPI is not set
CONFIG_USB_SERIAL_SIERRAWIRELESS=m
# CONFIG_USB_SERIAL_SYMBOL is not set
CONFIG_USB_SERIAL_TI=m
CONFIG_USB_SERIAL_CYBERJACK=m
CONFIG_USB_SERIAL_XIRCOM=m
CONFIG_USB_SERIAL_OPTION=m
CONFIG_USB_SERIAL_OMNINET=m
# CONFIG_USB_SERIAL_OPTICON is not set
# CONFIG_USB_SERIAL_VIVOPAY_SERIAL is not set
CONFIG_USB_SERIAL_DEBUG=m
#
# USB Miscellaneous drivers
#
CONFIG_USB_EMI62=m
CONFIG_USB_EMI26=m
CONFIG_USB_ADUTUX=m
# CONFIG_USB_SEVSEG is not set
# CONFIG_USB_RIO500 is not set
CONFIG_USB_LEGOTOWER=m
CONFIG_USB_LCD=m
CONFIG_USB_LED=m
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
CONFIG_USB_IDMOUSE=m
CONFIG_USB_FTDI_ELAN=m
CONFIG_USB_APPLEDISPLAY=m
CONFIG_USB_SISUSBVGA=m
CONFIG_USB_SISUSBVGA_CON=y
CONFIG_USB_LD=m
CONFIG_USB_TRANCEVIBRATOR=m
CONFIG_USB_IOWARRIOR=m
# CONFIG_USB_TEST is not set
CONFIG_USB_ISIGHTFW=m
CONFIG_USB_ATM=m
CONFIG_USB_SPEEDTOUCH=m
CONFIG_USB_CXACRU=m
CONFIG_USB_UEAGLEATM=m
CONFIG_USB_XUSBATM=m
# CONFIG_USB_GADGET is not set
#
# OTG and related infrastructure
#
# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_UWB is not set
CONFIG_MMC=m
# CONFIG_MMC_DEBUG is not set
# CONFIG_MMC_UNSAFE_RESUME is not set
#
# MMC/SD/SDIO Card Drivers
#
CONFIG_MMC_BLOCK=m
CONFIG_MMC_BLOCK_BOUNCE=y
CONFIG_SDIO_UART=m
# CONFIG_MMC_TEST is not set
#
# MMC/SD/SDIO Host Controller Drivers
#
CONFIG_MMC_SDHCI=m
CONFIG_MMC_SDHCI_PCI=m
# CONFIG_MMC_RICOH_MMC is not set
# CONFIG_MMC_SDHCI_PLTFM is not set
CONFIG_MMC_WBSD=m
CONFIG_MMC_TIFM_SD=m
CONFIG_MMC_SDRICOH_CS=m
# CONFIG_MMC_CB710 is not set
# CONFIG_MMC_VIA_SDMMC is not set
CONFIG_MEMSTICK=m
# CONFIG_MEMSTICK_DEBUG is not set
#
# MemoryStick drivers
#
# CONFIG_MEMSTICK_UNSAFE_RESUME is not set
CONFIG_MSPRO_BLOCK=m
#
# MemoryStick Host Controller Drivers
#
CONFIG_MEMSTICK_TIFM_MS=m
CONFIG_MEMSTICK_JMICRON_38X=m
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
#
# LED drivers
#
# CONFIG_LEDS_ALIX2 is not set
# CONFIG_LEDS_PCA9532 is not set
# CONFIG_LEDS_LP3944 is not set
CONFIG_LEDS_CLEVO_MAIL=m
# CONFIG_LEDS_PCA955X is not set
# CONFIG_LEDS_BD2802 is not set
# CONFIG_LEDS_INTEL_SS4200 is not set
#
# LED Triggers
#
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=m
CONFIG_LEDS_TRIGGER_HEARTBEAT=m
# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
CONFIG_LEDS_TRIGGER_DEFAULT_ON=m
#
# iptables trigger is under Netfilter config (LED target)
#
CONFIG_ACCESSIBILITY=y
CONFIG_A11Y_BRAILLE_CONSOLE=y
CONFIG_INFINIBAND=m
CONFIG_INFINIBAND_USER_MAD=m
CONFIG_INFINIBAND_USER_ACCESS=m
CONFIG_INFINIBAND_USER_MEM=y
CONFIG_INFINIBAND_ADDR_TRANS=y
CONFIG_INFINIBAND_MTHCA=m
CONFIG_INFINIBAND_MTHCA_DEBUG=y
CONFIG_INFINIBAND_IPATH=m
CONFIG_INFINIBAND_AMSO1100=m
# CONFIG_INFINIBAND_AMSO1100_DEBUG is not set
CONFIG_INFINIBAND_CXGB3=m
# CONFIG_INFINIBAND_CXGB3_DEBUG is not set
CONFIG_MLX4_INFINIBAND=m
CONFIG_INFINIBAND_NES=m
# CONFIG_INFINIBAND_NES_DEBUG is not set
CONFIG_INFINIBAND_IPOIB=m
CONFIG_INFINIBAND_IPOIB_CM=y
CONFIG_INFINIBAND_IPOIB_DEBUG=y
CONFIG_INFINIBAND_IPOIB_DEBUG_DATA=y
CONFIG_INFINIBAND_SRP=m
CONFIG_INFINIBAND_ISER=m
CONFIG_EDAC=y
#
# Reporting subsystems
#
# CONFIG_EDAC_DEBUG is not set
CONFIG_EDAC_DECODE_MCE=y
CONFIG_EDAC_MM_EDAC=m
# CONFIG_EDAC_AMD64 is not set
CONFIG_EDAC_E752X=m
CONFIG_EDAC_I82975X=m
CONFIG_EDAC_I3000=m
# CONFIG_EDAC_I3200 is not set
# CONFIG_EDAC_X38 is not set
# CONFIG_EDAC_I5400 is not set
CONFIG_EDAC_I5000=m
CONFIG_EDAC_I5100=m
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
# CONFIG_RTC_HCTOSYS is not set
# CONFIG_RTC_DEBUG is not set
#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
# CONFIG_RTC_DRV_TEST is not set
#
# I2C RTC drivers
#
CONFIG_RTC_DRV_DS1307=m
CONFIG_RTC_DRV_DS1374=m
CONFIG_RTC_DRV_DS1672=m
CONFIG_RTC_DRV_MAX6900=m
CONFIG_RTC_DRV_RS5C372=m
CONFIG_RTC_DRV_ISL1208=m
CONFIG_RTC_DRV_X1205=m
CONFIG_RTC_DRV_PCF8563=m
CONFIG_RTC_DRV_PCF8583=m
CONFIG_RTC_DRV_M41T80=m
CONFIG_RTC_DRV_M41T80_WDT=y
# CONFIG_RTC_DRV_BQ32K is not set
# CONFIG_RTC_DRV_S35390A is not set
CONFIG_RTC_DRV_FM3130=m
# CONFIG_RTC_DRV_RX8581 is not set
# CONFIG_RTC_DRV_RX8025 is not set
#
# SPI RTC drivers
#
#
# Platform RTC drivers
#
CONFIG_RTC_DRV_CMOS=y
# CONFIG_RTC_DRV_DS1286 is not set
CONFIG_RTC_DRV_DS1511=m
CONFIG_RTC_DRV_DS1553=m
CONFIG_RTC_DRV_DS1742=m
CONFIG_RTC_DRV_STK17TA8=m
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
CONFIG_RTC_DRV_M48T59=m
# CONFIG_RTC_DRV_MSM6242 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
# CONFIG_RTC_DRV_RP5C01 is not set
CONFIG_RTC_DRV_V3020=m
#
# on-CPU RTC drivers
#
CONFIG_DMADEVICES=y
# CONFIG_DMADEVICES_DEBUG is not set
#
# DMA Devices
#
CONFIG_ASYNC_TX_DISABLE_CHANNEL_SWITCH=y
CONFIG_INTEL_IOATDMA=m
CONFIG_DMA_ENGINE=y
#
# DMA Clients
#
CONFIG_NET_DMA=y
# CONFIG_ASYNC_TX_DMA is not set
# CONFIG_DMATEST is not set
CONFIG_DCA=m
CONFIG_AUXDISPLAY=y
CONFIG_KS0108=m
CONFIG_KS0108_PORT=0x378
CONFIG_KS0108_DELAY=2
CONFIG_CFAG12864B=m
CONFIG_CFAG12864B_RATE=20
CONFIG_UIO=m
CONFIG_UIO_CIF=m
CONFIG_UIO_PDRV=m
CONFIG_UIO_PDRV_GENIRQ=m
# CONFIG_UIO_AEC is not set
# CONFIG_UIO_SERCOS3 is not set
# CONFIG_UIO_PCI_GENERIC is not set
# CONFIG_UIO_NETX is not set
#
# TI VLYNQ
#
#
# Xen driver support
#
CONFIG_XEN_BALLOON=y
CONFIG_XEN_SCRUB_PAGES=y
CONFIG_XEN_DEV_EVTCHN=y
CONFIG_XENFS=y
CONFIG_XEN_COMPAT_XENFS=y
CONFIG_XEN_SYS_HYPERVISOR=y
# CONFIG_STAGING is not set
CONFIG_X86_PLATFORM_DEVICES=y
CONFIG_ACER_WMI=m
CONFIG_ASUS_LAPTOP=m
# CONFIG_DELL_LAPTOP is not set
# CONFIG_DELL_WMI is not set
CONFIG_FUJITSU_LAPTOP=m
# CONFIG_FUJITSU_LAPTOP_DEBUG is not set
CONFIG_HP_WMI=m
CONFIG_MSI_LAPTOP=m
# CONFIG_PANASONIC_LAPTOP is not set
CONFIG_COMPAL_LAPTOP=m
CONFIG_SONY_LAPTOP=m
CONFIG_SONYPI_COMPAT=y
CONFIG_THINKPAD_ACPI=m
CONFIG_THINKPAD_ACPI_ALSA_SUPPORT=y
# CONFIG_THINKPAD_ACPI_DEBUGFACILITIES is not set
# CONFIG_THINKPAD_ACPI_DEBUG is not set
# CONFIG_THINKPAD_ACPI_UNSAFE_LEDS is not set
CONFIG_THINKPAD_ACPI_VIDEO=y
CONFIG_THINKPAD_ACPI_HOTKEY_POLL=y
# CONFIG_INTEL_MENLOW is not set
# CONFIG_EEEPC_LAPTOP is not set
CONFIG_ACPI_WMI=m
# CONFIG_MSI_WMI is not set
# CONFIG_ACPI_ASUS is not set
# CONFIG_TOPSTAR_LAPTOP is not set
CONFIG_ACPI_TOSHIBA=m
# CONFIG_TOSHIBA_BT_RFKILL is not set
# CONFIG_ACPI_CMPC is not set
#
# Firmware Drivers
#
CONFIG_EDD=m
# CONFIG_EDD_OFF is not set
CONFIG_FIRMWARE_MEMMAP=y
CONFIG_EFI_VARS=y
CONFIG_DELL_RBU=m
CONFIG_DCDBAS=m
CONFIG_DMIID=y
CONFIG_ISCSI_IBFT_FIND=y
CONFIG_ISCSI_IBFT=m
#
# File systems
#
CONFIG_EXT2_FS=m
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
CONFIG_EXT2_FS_XIP=y
CONFIG_EXT3_FS=y
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
CONFIG_EXT4_FS=m
CONFIG_EXT4_FS_XATTR=y
CONFIG_EXT4_FS_POSIX_ACL=y
CONFIG_EXT4_FS_SECURITY=y
# CONFIG_EXT4_DEBUG is not set
CONFIG_FS_XIP=y
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_JBD2=m
CONFIG_JBD2_DEBUG=y
CONFIG_FS_MBCACHE=y
CONFIG_REISERFS_FS=m
# CONFIG_REISERFS_CHECK is not set
CONFIG_REISERFS_PROC_INFO=y
CONFIG_REISERFS_FS_XATTR=y
CONFIG_REISERFS_FS_POSIX_ACL=y
CONFIG_REISERFS_FS_SECURITY=y
CONFIG_JFS_FS=m
CONFIG_JFS_POSIX_ACL=y
CONFIG_JFS_SECURITY=y
# CONFIG_JFS_DEBUG is not set
# CONFIG_JFS_STATISTICS is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_XFS_FS=m
CONFIG_XFS_QUOTA=y
CONFIG_XFS_POSIX_ACL=y
# CONFIG_XFS_RT is not set
# CONFIG_XFS_DEBUG is not set
CONFIG_GFS2_FS=m
# CONFIG_GFS2_FS_LOCKING_DLM is not set
CONFIG_OCFS2_FS=m
CONFIG_OCFS2_FS_O2CB=m
CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
# CONFIG_OCFS2_FS_STATS is not set
# CONFIG_OCFS2_DEBUG_MASKLOG is not set
# CONFIG_OCFS2_DEBUG_FS is not set
# CONFIG_BTRFS_FS is not set
# CONFIG_NILFS2_FS is not set
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_QUOTA=y
CONFIG_QUOTA_NETLINK_INTERFACE=y
# CONFIG_PRINT_QUOTA_WARNING is not set
CONFIG_QUOTA_TREE=y
# CONFIG_QFMT_V1 is not set
CONFIG_QFMT_V2=y
CONFIG_QUOTACTL=y
CONFIG_QUOTACTL_COMPAT=y
CONFIG_AUTOFS_FS=m
CONFIG_AUTOFS4_FS=m
CONFIG_FUSE_FS=m
# CONFIG_CUSE is not set
CONFIG_GENERIC_ACL=y
#
# Caches
#
# CONFIG_FSCACHE is not set
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_UDF_FS=m
CONFIG_UDF_NLS=y
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="ascii"
# CONFIG_NTFS_FS is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_VMCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_CONFIGFS_FS=m
CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
CONFIG_AFFS_FS=m
CONFIG_ECRYPT_FS=m
CONFIG_HFS_FS=m
CONFIG_HFSPLUS_FS=m
CONFIG_BEFS_FS=m
# CONFIG_BEFS_DEBUG is not set
CONFIG_BFS_FS=m
CONFIG_EFS_FS=m
CONFIG_JFFS2_FS=m
CONFIG_JFFS2_FS_DEBUG=0
CONFIG_JFFS2_FS_WRITEBUFFER=y
# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
CONFIG_JFFS2_SUMMARY=y
CONFIG_JFFS2_FS_XATTR=y
CONFIG_JFFS2_FS_POSIX_ACL=y
CONFIG_JFFS2_FS_SECURITY=y
# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
CONFIG_JFFS2_ZLIB=y
# CONFIG_JFFS2_LZO is not set
CONFIG_JFFS2_RTIME=y
# CONFIG_JFFS2_RUBIN is not set
CONFIG_UBIFS_FS=m
CONFIG_UBIFS_FS_XATTR=y
# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set
CONFIG_UBIFS_FS_LZO=y
CONFIG_UBIFS_FS_ZLIB=y
# CONFIG_UBIFS_FS_DEBUG is not set
# CONFIG_LOGFS is not set
CONFIG_CRAMFS=m
CONFIG_SQUASHFS=m
# CONFIG_SQUASHFS_EMBEDDED is not set
CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
CONFIG_VXFS_FS=m
CONFIG_MINIX_FS=m
CONFIG_OMFS_FS=m
# CONFIG_HPFS_FS is not set
CONFIG_QNX4FS_FS=m
CONFIG_ROMFS_FS=m
CONFIG_ROMFS_BACKED_BY_BLOCK=y
# CONFIG_ROMFS_BACKED_BY_MTD is not set
# CONFIG_ROMFS_BACKED_BY_BOTH is not set
CONFIG_ROMFS_ON_BLOCK=y
CONFIG_SYSV_FS=m
CONFIG_UFS_FS=m
# CONFIG_UFS_FS_WRITE is not set
# CONFIG_UFS_DEBUG is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=y
# CONFIG_NFS_V4_1 is not set
CONFIG_NFSD=m
CONFIG_NFSD_V2_ACL=y
CONFIG_NFSD_V3=y
CONFIG_NFSD_V3_ACL=y
CONFIG_NFSD_V4=y
CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
CONFIG_NFS_ACL_SUPPORT=m
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=m
CONFIG_SUNRPC_GSS=m
CONFIG_SUNRPC_XPRT_RDMA=m
CONFIG_RPCSEC_GSS_KRB5=m
CONFIG_RPCSEC_GSS_SPKM3=m
# CONFIG_SMB_FS is not set
CONFIG_CIFS=m
# CONFIG_CIFS_STATS is not set
CONFIG_CIFS_WEAK_PW_HASH=y
CONFIG_CIFS_UPCALL=y
CONFIG_CIFS_XATTR=y
CONFIG_CIFS_POSIX=y
# CONFIG_CIFS_DEBUG2 is not set
CONFIG_CIFS_DFS_UPCALL=y
CONFIG_CIFS_EXPERIMENTAL=y
CONFIG_NCP_FS=m
CONFIG_NCPFS_PACKET_SIGNING=y
CONFIG_NCPFS_IOCTL_LOCKING=y
CONFIG_NCPFS_STRONG=y
CONFIG_NCPFS_NFS_NS=y
CONFIG_NCPFS_OS2_NS=y
CONFIG_NCPFS_SMALLDOS=y
CONFIG_NCPFS_NLS=y
CONFIG_NCPFS_EXTRAS=y
CONFIG_CODA_FS=m
# CONFIG_AFS_FS is not set
CONFIG_9P_FS=m
#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
CONFIG_OSF_PARTITION=y
CONFIG_AMIGA_PARTITION=y
# CONFIG_ATARI_PARTITION is not set
CONFIG_MAC_PARTITION=y
CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
CONFIG_MINIX_SUBPARTITION=y
CONFIG_SOLARIS_X86_PARTITION=y
CONFIG_UNIXWARE_DISKLABEL=y
# CONFIG_LDM_PARTITION is not set
CONFIG_SGI_PARTITION=y
# CONFIG_ULTRIX_PARTITION is not set
CONFIG_SUN_PARTITION=y
CONFIG_KARMA_PARTITION=y
CONFIG_EFI_PARTITION=y
# CONFIG_SYSV68_PARTITION is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="utf8"
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_CODEPAGE_737=m
CONFIG_NLS_CODEPAGE_775=m
CONFIG_NLS_CODEPAGE_850=m
CONFIG_NLS_CODEPAGE_852=m
CONFIG_NLS_CODEPAGE_855=m
CONFIG_NLS_CODEPAGE_857=m
CONFIG_NLS_CODEPAGE_860=m
CONFIG_NLS_CODEPAGE_861=m
CONFIG_NLS_CODEPAGE_862=m
CONFIG_NLS_CODEPAGE_863=m
CONFIG_NLS_CODEPAGE_864=m
CONFIG_NLS_CODEPAGE_865=m
CONFIG_NLS_CODEPAGE_866=m
CONFIG_NLS_CODEPAGE_869=m
CONFIG_NLS_CODEPAGE_936=m
CONFIG_NLS_CODEPAGE_950=m
CONFIG_NLS_CODEPAGE_932=m
CONFIG_NLS_CODEPAGE_949=m
CONFIG_NLS_CODEPAGE_874=m
CONFIG_NLS_ISO8859_8=m
CONFIG_NLS_CODEPAGE_1250=m
CONFIG_NLS_CODEPAGE_1251=m
CONFIG_NLS_ASCII=y
CONFIG_NLS_ISO8859_1=m
CONFIG_NLS_ISO8859_2=m
CONFIG_NLS_ISO8859_3=m
CONFIG_NLS_ISO8859_4=m
CONFIG_NLS_ISO8859_5=m
CONFIG_NLS_ISO8859_6=m
CONFIG_NLS_ISO8859_7=m
CONFIG_NLS_ISO8859_9=m
CONFIG_NLS_ISO8859_13=m
CONFIG_NLS_ISO8859_14=m
CONFIG_NLS_ISO8859_15=m
CONFIG_NLS_KOI8_R=m
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_UTF8=m
CONFIG_DLM=m
CONFIG_DLM_DEBUG=y
#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
# CONFIG_PRINTK_TIME is not set
# CONFIG_ENABLE_WARN_DEPRECATED is not set
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=2048
CONFIG_MAGIC_SYSRQ=y
# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_UNUSED_SYMBOLS=y
CONFIG_DEBUG_FS=y
CONFIG_HEADERS_CHECK=y
CONFIG_DEBUG_KERNEL=y
CONFIG_DEBUG_SHIRQ=y
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
CONFIG_DETECT_HUNG_TASK=y
# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
CONFIG_SCHEDSTATS=y
CONFIG_TIMER_STATS=y
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_KMEMLEAK is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_LOCK_ALLOC is not set
# CONFIG_PROVE_LOCKING is not set
# CONFIG_LOCK_STAT is not set
CONFIG_TRACE_IRQFLAGS=y
CONFIG_DEBUG_SPINLOCK_SLEEP=y
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
CONFIG_STACKTRACE=y
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_VIRTUAL is not set
# CONFIG_DEBUG_WRITECOUNT is not set
CONFIG_DEBUG_MEMORY_INIT=y
CONFIG_DEBUG_LIST=y
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_DEBUG_CREDENTIALS is not set
CONFIG_ARCH_WANT_FRAME_POINTERS=y
CONFIG_FRAME_POINTER=y
CONFIG_BOOT_PRINTK_DELAY=y
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_KPROBES_SANITY_TEST is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# CONFIG_LKDTM is not set
# CONFIG_FAULT_INJECTION is not set
CONFIG_LATENCYTOP=y
# CONFIG_SYSCTL_SYSCALL_CHECK is not set
# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_USER_STACKTRACE_SUPPORT=y
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_FP_TEST=y
CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_TRACER_MAX_TRACE=y
CONFIG_RING_BUFFER=y
CONFIG_EVENT_TRACING=y
CONFIG_CONTEXT_SWITCH_TRACER=y
CONFIG_RING_BUFFER_ALLOW_SWAP=y
CONFIG_TRACING=y
CONFIG_GENERIC_TRACER=y
CONFIG_TRACING_SUPPORT=y
CONFIG_FTRACE=y
# CONFIG_FUNCTION_TRACER is not set
CONFIG_IRQSOFF_TRACER=y
CONFIG_SYSPROF_TRACER=y
CONFIG_SCHED_TRACER=y
# CONFIG_FTRACE_SYSCALLS is not set
# CONFIG_BOOT_TRACER is not set
CONFIG_BRANCH_PROFILE_NONE=y
# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
# CONFIG_PROFILE_ALL_BRANCHES is not set
# CONFIG_KSYM_TRACER is not set
# CONFIG_STACK_TRACER is not set
# CONFIG_KMEMTRACE is not set
# CONFIG_WORKQUEUE_TRACER is not set
CONFIG_BLK_DEV_IO_TRACE=y
CONFIG_KPROBE_EVENT=y
# CONFIG_FTRACE_STARTUP_TEST is not set
# CONFIG_MMIOTRACE is not set
# CONFIG_RING_BUFFER_BENCHMARK is not set
CONFIG_PROVIDE_OHCI1394_DMA_INIT=y
# CONFIG_FIREWIRE_OHCI_REMOTE_DMA is not set
CONFIG_BUILD_DOCSRC=y
# CONFIG_DYNAMIC_DEBUG is not set
# CONFIG_DMA_API_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_KGDB=y
CONFIG_KGDB_SERIAL_CONSOLE=y
CONFIG_KGDB_TESTS=y
# CONFIG_KGDB_TESTS_ON_BOOT is not set
CONFIG_HAVE_ARCH_KMEMCHECK=y
CONFIG_STRICT_DEVMEM=y
# CONFIG_X86_VERBOSE_BOOTUP is not set
CONFIG_EARLY_PRINTK=y
# CONFIG_EARLY_PRINTK_DBGP is not set
CONFIG_DEBUG_STACKOVERFLOW=y
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_PER_CPU_MAPS is not set
# CONFIG_X86_PTDUMP is not set
CONFIG_DEBUG_RODATA=y
# CONFIG_DEBUG_RODATA_TEST is not set
# CONFIG_DEBUG_NX_TEST is not set
# CONFIG_IOMMU_DEBUG is not set
# CONFIG_IOMMU_STRESS is not set
CONFIG_HAVE_MMIOTRACE_SUPPORT=y
# CONFIG_X86_DECODER_SELFTEST is not set
CONFIG_IO_DELAY_TYPE_0X80=0
CONFIG_IO_DELAY_TYPE_0XED=1
CONFIG_IO_DELAY_TYPE_UDELAY=2
CONFIG_IO_DELAY_TYPE_NONE=3
CONFIG_IO_DELAY_0X80=y
# CONFIG_IO_DELAY_0XED is not set
# CONFIG_IO_DELAY_UDELAY is not set
# CONFIG_IO_DELAY_NONE is not set
CONFIG_DEFAULT_IO_DELAY_TYPE=0
CONFIG_DEBUG_BOOT_PARAMS=y
# CONFIG_CPA_DEBUG is not set
CONFIG_OPTIMIZE_INLINING=y
# CONFIG_DEBUG_STRICT_USER_COPY_CHECKS is not set
#
# Security options
#
CONFIG_KEYS=y
CONFIG_KEYS_DEBUG_PROC_KEYS=y
CONFIG_SECURITY=y
CONFIG_SECURITYFS=y
CONFIG_SECURITY_NETWORK=y
CONFIG_SECURITY_NETWORK_XFRM=y
# CONFIG_SECURITY_PATH is not set
CONFIG_LSM_MMAP_MIN_ADDR=65536
CONFIG_SECURITY_SELINUX=y
CONFIG_SECURITY_SELINUX_BOOTPARAM=y
CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=1
CONFIG_SECURITY_SELINUX_DISABLE=y
CONFIG_SECURITY_SELINUX_DEVELOP=y
CONFIG_SECURITY_SELINUX_AVC_STATS=y
CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1
# CONFIG_SECURITY_SELINUX_POLICYDB_VERSION_MAX is not set
# CONFIG_SECURITY_SMACK is not set
# CONFIG_SECURITY_TOMOYO is not set
# CONFIG_IMA is not set
CONFIG_DEFAULT_SECURITY_SELINUX=y
# CONFIG_DEFAULT_SECURITY_SMACK is not set
# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
# CONFIG_DEFAULT_SECURITY_DAC is not set
CONFIG_DEFAULT_SECURITY="selinux"
CONFIG_XOR_BLOCKS=m
CONFIG_ASYNC_CORE=m
CONFIG_ASYNC_MEMCPY=m
CONFIG_ASYNC_XOR=m
CONFIG_ASYNC_PQ=m
CONFIG_ASYNC_RAID6_RECOV=m
CONFIG_ASYNC_TX_DISABLE_PQ_VAL_DMA=y
CONFIG_ASYNC_TX_DISABLE_XOR_VAL_DMA=y
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=m
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=m
CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=m
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
CONFIG_CRYPTO_GF128MUL=m
CONFIG_CRYPTO_NULL=m
# CONFIG_CRYPTO_PCRYPT is not set
CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_AUTHENC=m
CONFIG_CRYPTO_TEST=m
#
# Authenticated Encryption with Associated Data
#
CONFIG_CRYPTO_CCM=m
CONFIG_CRYPTO_GCM=m
CONFIG_CRYPTO_SEQIV=m
#
# Block modes
#
CONFIG_CRYPTO_CBC=m
CONFIG_CRYPTO_CTR=m
CONFIG_CRYPTO_CTS=m
CONFIG_CRYPTO_ECB=m
CONFIG_CRYPTO_LRW=m
CONFIG_CRYPTO_PCBC=m
CONFIG_CRYPTO_XTS=m
#
# Hash modes
#
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_XCBC=m
# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#
CONFIG_CRYPTO_CRC32C=m
# CONFIG_CRYPTO_CRC32C_INTEL is not set
CONFIG_CRYPTO_GHASH=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_RMD128=m
CONFIG_CRYPTO_RMD160=m
CONFIG_CRYPTO_RMD256=m
CONFIG_CRYPTO_RMD320=m
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_TGR192=m
CONFIG_CRYPTO_WP512=m
# CONFIG_CRYPTO_GHASH_CLMUL_NI_INTEL is not set
#
# Ciphers
#
CONFIG_CRYPTO_AES=m
CONFIG_CRYPTO_AES_X86_64=m
# CONFIG_CRYPTO_AES_NI_INTEL is not set
CONFIG_CRYPTO_ANUBIS=m
CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_CAMELLIA=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_DES=m
CONFIG_CRYPTO_FCRYPT=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_SALSA20=m
CONFIG_CRYPTO_SALSA20_X86_64=m
CONFIG_CRYPTO_SEED=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_TWOFISH_COMMON=m
CONFIG_CRYPTO_TWOFISH_X86_64=m
#
# Compression
#
CONFIG_CRYPTO_DEFLATE=m
# CONFIG_CRYPTO_ZLIB is not set
CONFIG_CRYPTO_LZO=m
#
# Random Number Generation
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_PADLOCK is not set
CONFIG_CRYPTO_DEV_HIFN_795X=m
CONFIG_CRYPTO_DEV_HIFN_795X_RNG=y
CONFIG_HAVE_KVM=y
CONFIG_HAVE_KVM_IRQCHIP=y
CONFIG_HAVE_KVM_EVENTFD=y
CONFIG_KVM_APIC_ARCHITECTURE=y
CONFIG_KVM_MMIO=y
CONFIG_VIRTUALIZATION=y
CONFIG_KVM=m
CONFIG_KVM_INTEL=m
CONFIG_KVM_AMD=m
# CONFIG_VHOST_NET is not set
CONFIG_VIRTIO=m
CONFIG_VIRTIO_RING=m
CONFIG_VIRTIO_PCI=m
CONFIG_VIRTIO_BALLOON=m
CONFIG_BINARY_PRINTF=y
#
# Library routines
#
CONFIG_BITREVERSE=y
CONFIG_GENERIC_FIND_FIRST_BIT=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_FIND_LAST_BIT=y
CONFIG_CRC_CCITT=m
CONFIG_CRC16=m
CONFIG_CRC_T10DIF=y
CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=m
CONFIG_LZO_COMPRESS=m
CONFIG_LZO_DECOMPRESS=y
CONFIG_DECOMPRESS_GZIP=y
CONFIG_DECOMPRESS_BZIP2=y
CONFIG_DECOMPRESS_LZMA=y
CONFIG_DECOMPRESS_LZO=y
CONFIG_GENERIC_ALLOCATOR=y
CONFIG_REED_SOLOMON=m
CONFIG_REED_SOLOMON_DEC16=y
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=m
CONFIG_TEXTSEARCH_BM=m
CONFIG_TEXTSEARCH_FSM=m
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_CHECK_SIGNATURE=y
CONFIG_NLATTR=y
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2010-03-18 22:22 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2010-03-18 22:22 BUG: 2.6.34-rc1, RIP is (null) Randy Dunlap
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.