Re: [lm-sensors] [PATCH 4/4] [RFC] hwmon: f71882fg: Add watchdog

[Hans de Goede <hdegoede@redhat.com>]

Hi,

Nack:
As the watchdog has its own SIO logical device number, it should
have a separate driver, not have support glued to the hwmon driver.

Regards,

Hans


On 03/24/2010 12:12 AM, Giel van Schijndel wrote:
> Implement the watchdog API for the Fintek F71808E.
>
> Signed-off-by: Giel van Schijndel<me@mortis.eu>
> ---
>   drivers/hwmon/f71882fg.c |  553 ++++++++++++++++++++++++++++++++++++++++++++++
>   1 files changed, 553 insertions(+), 0 deletions(-)
>
> diff --git a/drivers/hwmon/f71882fg.c b/drivers/hwmon/f71882fg.c
> index 8006271..3604613 100644
> --- a/drivers/hwmon/f71882fg.c
> +++ b/drivers/hwmon/f71882fg.c
> @@ -26,14 +26,19 @@
>   #include<linux/hwmon.h>
>   #include<linux/hwmon-sysfs.h>
>   #include<linux/err.h>
> +#include<linux/miscdevice.h>
>   #include<linux/mutex.h>
> +#include<linux/notifier.h>
>   #include<linux/io.h>
>   #include<linux/acpi.h>
> +#include<linux/reboot.h>
> +#include<linux/watchdog.h>
>
>   #define DRVNAME "f71882fg"
>
>   #define SIO_F71858FG_LD_HWM	0x02	/* Hardware monitor logical device */
>   #define SIO_F71882FG_LD_HWM	0x04	/* Hardware monitor logical device */
> +#define SIO_F71808FG_LD_WDT	0x07	/* Watchdog timer logical device */
>   #define SIO_UNLOCK_KEY		0x87	/* Key to enable Super-I/O */
>   #define SIO_LOCK_KEY		0xAA	/* Key to diasble Super-I/O */
>
> @@ -91,12 +96,52 @@
>
>   #define	F71882FG_REG_START		0x01
>
> +#define F71808FG_REG_WDO_CONF		0xf0
> +#define F71808FG_REG_WDT_CONF		0xf5
> +#define F71808FG_REG_WD_TIME		0xf6
> +
> +#define F71808FG_FLAG_WDOUT_EN		7
> +
> +#define F71808FG_FLAG_WDTMOUT_STS	5
> +#define F71808FG_FLAG_WD_EN		5
> +#define F71808FG_FLAG_WD_PULSE		4
> +#define F71808FG_FLAG_WD_UNIT		3
> +
>   #define FAN_MIN_DETECT			366 /* Lowest detectable fanspeed */
>
> +/* Default values */
> +#define WATCHDOG_TIMEOUT	60	/* 1 minute default timeout */
> +#define WATCHDOG_MAX_TIMEOUT	(60 * 255)
> +#define WATCHDOG_PULSE_WIDTH	125	/* 125 ms, default pulse width for
> +					   watchdog signal */
> +
>   static unsigned short force_id;
>   module_param(force_id, ushort, 0);
>   MODULE_PARM_DESC(force_id, "Override the detected device ID");
>
> +static const int max_timeout = WATCHDOG_MAX_TIMEOUT;
> +static int timeout = 60;	/* default timeout in seconds */
> +module_param(timeout, int, 0);
> +MODULE_PARM_DESC(timeout,
> +	"Watchdog timeout in seconds. 1<= timeout<="
> +			__MODULE_STRING(WATCHDOG_MAX_TIMEOUT) " (default="
> +			__MODULE_STRING(WATCHDOG_TIMEOUT) ")");
> +
> +static unsigned int pulse_width = WATCHDOG_PULSE_WIDTH;
> +module_param(pulse_width, uint, 0);
> +MODULE_PARM_DESC(pulse_width,
> +	"Watchdog signal pulse width. 0(=level), 1 ms, 25 ms, 125 ms or 5000 ms"
> +			" (default=" __MODULE_STRING(WATCHDOG_PULSE_WIDTH) ")");
> +
> +static int nowayout = WATCHDOG_NOWAYOUT;
> +module_param(nowayout, bool, 0444);
> +MODULE_PARM_DESC(nowayout, "Disable watchdog shutdown on close");
> +
> +static int start_withtimeout = 0;
> +module_param(start_withtimeout, uint, 0);
> +MODULE_PARM_DESC(start_withtimeout, "Start watchdog timer on module load with"
> +	" given initial timeout. Zero (default) disables this feature.");
> +
>   enum chips { f71808fg, f71858fg, f71862fg, f71882fg, f71889fg, f8000 };
>
>   static const char *f71882fg_names[] = {
> @@ -113,6 +158,9 @@ static struct platform_device *f71882fg_pdev;
>   /* Super-I/O Function prototypes */
>   static inline int superio_inb(int base, int reg);
>   static inline int superio_inw(int base, int reg);
> +static inline void superio_outb(int base, int reg, u8 val);
> +static inline void superio_set_bit(int base, int reg, int bit);
> +static inline void superio_clear_bit(int base, int reg, int bit);
>   static inline void superio_enter(int base);
>   static inline void superio_select(int base, int ld);
>   static inline void superio_exit(int base);
> @@ -162,6 +210,24 @@ struct f71882fg_data {
>   	s8	pwm_auto_point_temp[4][4];
>   };
>
> +struct watchdog_data {
> +	unsigned short	sioaddr;
> +	enum chips	type;
> +	unsigned long	opened;
> +	struct mutex	lock;
> +	char		expect_close;
> +	struct watchdog_info ident;
> +
> +	unsigned short	timeout;
> +	u8		timer_val;	/* content for the wd_time register */
> +	char		minutes_mode;
> +	u8		pulse_val;	/* pulse width flag */
> +	char		pulse_mode;	/* enable pulse output mode? */
> +	char		caused_reboot;	/* last reboot was by the watchdog */
> +};
> +
> +static struct watchdog_data *watchdog;
> +
>   /* Sysfs in */
>   static ssize_t show_in(struct device *dev, struct device_attribute *devattr,
>   	char *buf);
> @@ -883,6 +949,26 @@ static int superio_inw(int base, int reg)
>   	return val;
>   }
>
> +static inline void superio_outb(int base, int reg, u8 val)
> +{
> +	outb(reg, base);
> +	outb(val, base + 1);
> +}
> +
> +static inline void superio_set_bit(int base, int reg, int bit)
> +{
> +	unsigned long val = superio_inb(base, reg);
> +	__set_bit(bit,&val);
> +	superio_outb(base, reg, val);
> +}
> +
> +static inline void superio_clear_bit(int base, int reg, int bit)
> +{
> +	unsigned long val = superio_inb(base, reg);
> +	__clear_bit(bit,&val);
> +	superio_outb(base, reg, val);
> +}
> +
>   static inline void superio_enter(int base)
>   {
>   	/* according to the datasheet the key must be send twice! */
> @@ -1941,6 +2027,430 @@ static void f71882fg_remove_sysfs_files(struct platform_device *pdev,
>   		device_remove_file(&pdev->dev,&attr[i].dev_attr);
>   }
>
> +static int watchdog_set_timeout(int timeout)
> +{
> +	if (!watchdog)
> +		return -ENODEV;
> +
> +	if (timeout<= 0
> +	 || timeout>   max_timeout) {
> +		printk(KERN_ERR DRVNAME ": watchdog timeout out of range\n");
> +		return -EINVAL;
> +	}
> +
> +	mutex_lock(&watchdog->lock);
> +
> +	watchdog->timeout = timeout;
> +	if (timeout>  0xff) {
> +		watchdog->timer_val = DIV_ROUND_UP(timeout, 60);
> +		watchdog->minutes_mode = true;
> +	} else {
> +		watchdog->timer_val = timeout;
> +		watchdog->minutes_mode = false;
> +	}
> +
> +	mutex_unlock(&watchdog->lock);
> +
> +	return 0;
> +}
> +
> +static int watchdog_set_pulse_width(unsigned int pw)
> +{
> +	int err = 0;
> +
> +	if (!watchdog)
> +		return -ENODEV;
> +
> +	mutex_lock(&watchdog->lock);
> +
> +	if        (pw<=    1) {
> +		watchdog->pulse_val = 0;
> +	} else if (pw<=   25) {
> +		watchdog->pulse_val = 1;
> +	} else if (pw<=  125) {
> +		watchdog->pulse_val = 2;
> +	} else if (pw<= 5000) {
> +		watchdog->pulse_val = 3;
> +	} else {
> +		printk(KERN_ERR DRVNAME ": watchdog pulse width out of range\n");
> +		err = -EINVAL;
> +		goto exit_unlock;
> +	}
> +
> +	watchdog->pulse_mode = pw;
> +
> +exit_unlock:
> +	mutex_unlock(&watchdog->lock);
> +	return err;
> +}
> +
> +static int watchdog_keepalive(void)
> +{
> +	if (!watchdog)
> +		return -ENODEV;
> +
> +	mutex_lock(&watchdog->lock);
> +	superio_enter(watchdog->sioaddr);
> +
> +	if (watchdog->minutes_mode)
> +		/* select minutes for timer units */
> +		superio_set_bit(watchdog->sioaddr, F71808FG_REG_WDT_CONF,
> +				F71808FG_FLAG_WD_UNIT);
> +	else
> +		/* select seconds for timer units */
> +		superio_clear_bit(watchdog->sioaddr, F71808FG_REG_WDT_CONF,
> +				F71808FG_FLAG_WD_UNIT);
> +
> +	/* Set timer value */
> +	superio_outb(watchdog->sioaddr, F71808FG_REG_WD_TIME,
> +			   watchdog->timeout);
> +
> +	superio_exit(watchdog->sioaddr);
> +	mutex_unlock(&watchdog->lock);
> +	return 0;
> +}
> +
> +static int watchdog_start(void)
> +{
> +	/* Make sure we don't die as soon as the watchdog is enabled below */
> +	int err = watchdog_keepalive();
> +	if (err)
> +		return err;
> +
> +	mutex_lock(&watchdog->lock);
> +	superio_enter(watchdog->sioaddr);
> +
> +	/* Watchdog pin configuration */
> +	switch (watchdog->type) {
> +	case f71808fg:
> +		/* Set ping 21 to GPIO23/WDTRST#, then to WDTRST# */
> +		superio_clear_bit(watchdog->sioaddr, 0x2a, 3);
> +		superio_clear_bit(watchdog->sioaddr, 0x2b, 3);
> +		break;
> +
> +	default:
> +		/* 'default' label to shut up the compiler and catch programmer errors */
> +		err = -ENODEV;
> +		goto exit_unlock;
> +	}
> +
> +	superio_select(watchdog->sioaddr, SIO_F71808FG_LD_WDT);
> +	superio_set_bit(watchdog->sioaddr, SIO_REG_ENABLE, 0);
> +	superio_set_bit(watchdog->sioaddr, F71808FG_REG_WDO_CONF,
> +			F71808FG_FLAG_WDOUT_EN);
> +
> +	superio_set_bit(watchdog->sioaddr, F71808FG_REG_WDT_CONF,
> +			F71808FG_FLAG_WD_EN);
> +
> +	if (watchdog->pulse_mode) {
> +		/* Select "pulse" output mode with given duration */
> +		u8 wdt_conf = superio_inb(watchdog->sioaddr,
> +				F71808FG_REG_WDT_CONF);
> +
> +		/* Set WD_PSWIDTH bits (1:0) */
> +		wdt_conf = (wdt_conf&  0xfc) | (watchdog->pulse_val&  0x03);
> +		/* Set WD_PULSE to "pulse" mode */
> +		wdt_conf |= BIT(F71808FG_FLAG_WD_PULSE);
> +
> +		superio_outb(watchdog->sioaddr, F71808FG_REG_WDT_CONF,
> +				wdt_conf);
> +	} else {
> +		/* Select "level" output mode */
> +		superio_clear_bit(watchdog->sioaddr, F71808FG_REG_WDT_CONF,
> +				F71808FG_FLAG_WD_PULSE);
> +	}
> +
> +exit_unlock:
> +	superio_exit(watchdog->sioaddr);
> +	mutex_unlock(&watchdog->lock);
> +
> +	return err;
> +}
> +
> +static int watchdog_stop(void)
> +{
> +	if (!watchdog)
> +		return -ENODEV;
> +
> +	mutex_lock(&watchdog->lock);
> +	superio_enter(watchdog->sioaddr);
> +
> +	superio_clear_bit(watchdog->sioaddr, F71808FG_REG_WDT_CONF,
> +			F71808FG_FLAG_WD_EN);
> +
> +	superio_exit(watchdog->sioaddr);
> +	mutex_unlock(&watchdog->lock);
> +
> +	return 0;
> +}
> +
> +static int watchdog_get_status(void)
> +{
> +	int status = 0;
> +
> +	if (!watchdog)
> +		return -ENODEV;
> +
> +	mutex_lock(&watchdog->lock);
> +	status = (watchdog->caused_reboot) ? WDIOF_CARDRESET : 0;
> +	mutex_unlock(&watchdog->lock);
> +
> +	return status;
> +}
> +
> +/* /dev/watchdog api */
> +
> +static int watchdog_open(struct inode *inode, struct file *file)
> +{
> +	int err;
> +
> +	/* If the watchdog is alive we don't need to start it again */
> +	if (test_and_set_bit(0,&watchdog->opened))
> +		return -EBUSY;
> +
> +	err = watchdog_start();
> +	if (err) {
> +		clear_bit(0,&watchdog->opened);
> +		return err;
> +	}
> +
> +	if (nowayout)
> +		__module_get(THIS_MODULE);
> +
> +	watchdog->expect_close = 0;
> +	return nonseekable_open(inode, file);
> +}
> +
> +static int watchdog_release(struct inode *inode, struct file *file)
> +{
> +	clear_bit(0,&watchdog->opened);
> +
> +	if (!watchdog->expect_close) {
> +		watchdog_keepalive();
> +		printk(KERN_CRIT DRVNAME
> +			": Unexpected close, not stopping watchdog!\n");
> +	} else if (!nowayout) {
> +		watchdog_stop();
> +	}
> +	return 0;
> +}
> +
> +/*
> + *      watchdog_write:
> + *      @file: file handle to the watchdog
> + *      @buf: buffer to write
> + *      @count: count of bytes
> + *      @ppos: pointer to the position to write. No seeks allowed
> + *
> + *      A write to a watchdog device is defined as a keepalive signal. Any
> + *      write of data will do, as we we don't define content meaning.
> + */
> +
> +static ssize_t watchdog_write(struct file *file, const char __user *buf,
> +			    size_t count, loff_t *ppos)
> +{
> +	if (count) {
> +		if (!nowayout) {
> +			size_t i;
> +
> +			/* In case it was set long ago */
> +			bool expect_close = false;
> +
> +			for (i = 0; i != count; i++) {
> +				char c;
> +				if (get_user(c, buf + i))
> +					return -EFAULT;
> +				expect_close = (c = 'V');
> +			}
> +
> +			/* Lock to properly order writes across fork()ed processes */
> +			mutex_lock(&watchdog->lock);
> +			watchdog->expect_close = expect_close;
> +			mutex_unlock(&watchdog->lock);
> +		}
> +
> +		/* someone wrote to us, we should restart timer */
> +		watchdog_keepalive();
> +	}
> +	return count;
> +}
> +
> +/*
> + *      watchdog_ioctl:
> + *      @inode: inode of the device
> + *      @file: file handle to the device
> + *      @cmd: watchdog command
> + *      @arg: argument pointer
> + *
> + *      The watchdog API defines a common set of functions for all watchdogs
> + *      according to their available features.
> + */
> +static long watchdog_ioctl(struct file *file, unsigned int cmd,
> +	unsigned long arg)
> +{
> +	int status;
> +	int new_options;
> +	int new_timeout;
> +	union {
> +		struct watchdog_info __user *ident;
> +		int __user *i;
> +	} uarg;
> +
> +	uarg.i = (int __user *)arg;
> +
> +	switch (cmd) {
> +	case WDIOC_GETSUPPORT:
> +		return copy_to_user(uarg.ident,&watchdog->ident,
> +			sizeof(watchdog->ident)) ? -EFAULT : 0;
> +
> +	case WDIOC_GETSTATUS:
> +		status = watchdog_get_status();
> +		if (status<  0)
> +			return status;
> +		return put_user(status, uarg.i);
> +
> +	case WDIOC_GETBOOTSTATUS:
> +		return put_user(0, uarg.i);
> +
> +	case WDIOC_SETOPTIONS:
> +		if (get_user(new_options, uarg.i))
> +			return -EFAULT;
> +
> +		if (new_options&  WDIOS_DISABLECARD) {
> +			watchdog_stop();
> +		}
> +
> +		if (new_options&  WDIOS_ENABLECARD)
> +			return watchdog_start();
> +
> +
> +	case WDIOC_KEEPALIVE:
> +		watchdog_keepalive();
> +		return 0;
> +
> +	case WDIOC_SETTIMEOUT:
> +		if (get_user(new_timeout, uarg.i))
> +			return -EFAULT;
> +
> +		if (watchdog_set_timeout(new_timeout))
> +			return -EINVAL;
> +
> +		watchdog_keepalive();
> +		/* Fall */
> +
> +	case WDIOC_GETTIMEOUT:
> +		return put_user(watchdog->timeout, uarg.i);
> +
> +	default:
> +		return -ENOTTY;
> +
> +	}
> +}
> +
> +static int watchdog_notify_sys(struct notifier_block *this, unsigned long code,
> +	void *unused)
> +{
> +	if (code = SYS_DOWN || code = SYS_HALT)
> +		watchdog_stop();
> +	return NOTIFY_DONE;
> +}
> +
> +static const struct file_operations watchdog_fops = {
> +	.owner		= THIS_MODULE,
> +	.llseek		= no_llseek,
> +	.open		= watchdog_open,
> +	.release	= watchdog_release,
> +	.write		= watchdog_write,
> +	.unlocked_ioctl	= watchdog_ioctl,
> +};
> +
> +static struct miscdevice watchdog_miscdev = {
> +	.minor		= WATCHDOG_MINOR,
> +	.name		= "watchdog",
> +	.fops		=&watchdog_fops,
> +};
> +
> +static struct notifier_block watchdog_notifier = {
> +	.notifier_call = watchdog_notify_sys,
> +};
> +
> +static int __init watchdog_init(void)
> +{
> +	int err = 0;
> +
> +	if (!request_region(watchdog->sioaddr, 2,
> +			watchdog->ident.identity)) {
> +		printk(KERN_ERR DRVNAME
> +			": I/O address 0x%04x already in use\n",
> +				(int)watchdog->sioaddr);
> +		return -EIO;
> +	}
> +
> +	err = register_reboot_notifier(&watchdog_notifier);
> +	if (err)
> +		goto exit_region;
> +
> +	err = misc_register(&watchdog_miscdev);
> +	if (err) {
> +		printk(KERN_ERR DRVNAME
> +			": cannot register miscdev on minor=%d\n",
> +				watchdog_miscdev.minor);
> +		goto exit_reboot;
> +	}
> +
> +	if (start_withtimeout) {
> +		if (start_withtimeout<= 0
> +		 || start_withtimeout>   max_timeout) {
> +			printk(KERN_ERR DRVNAME ": watchdog starting timeout out of range\n");
> +			err = -EINVAL;
> +			goto exit_reboot;
> +		}
> +
> +		err = watchdog_start();
> +		if (err) {
> +			printk(KERN_ERR DRVNAME
> +				": cannot start watchdog timer\n");
> +			goto exit_reboot;
> +		}
> +
> +		mutex_lock(&watchdog->lock);
> +		superio_enter(watchdog->sioaddr);
> +
> +		if (start_withtimeout>  0xff) {
> +			/* select minutes for timer units */
> +			superio_set_bit(watchdog->sioaddr, F71808FG_REG_WDT_CONF,
> +					F71808FG_FLAG_WD_UNIT);
> +			superio_outb(watchdog->sioaddr, F71808FG_REG_WD_TIME,
> +					   DIV_ROUND_UP(start_withtimeout, 60));
> +		} else {
> +			/* select seconds for timer units */
> +			superio_clear_bit(watchdog->sioaddr, F71808FG_REG_WDT_CONF,
> +					F71808FG_FLAG_WD_UNIT);
> +			superio_outb(watchdog->sioaddr, F71808FG_REG_WD_TIME,
> +					   start_withtimeout);
> +		}
> +
> +		superio_exit(watchdog->sioaddr);
> +		mutex_unlock(&watchdog->lock);
> +
> +		if (nowayout)
> +			__module_get(THIS_MODULE);
> +
> +		printk(KERN_INFO DRVNAME
> +			": watchdog started with initial timeout of %d seconds!\n",
> +			start_withtimeout);
> +	}
> +
> +	return 0;
> +
> +exit_reboot:
> +	unregister_reboot_notifier(&watchdog_notifier);
> +exit_region:
> +	release_region(watchdog->sioaddr, 2);
> +
> +	return err;
> +}
> +
>   static int __devinit f71882fg_probe(struct platform_device *pdev)
>   {
>   	struct f71882fg_data *data;
> @@ -2236,8 +2746,32 @@ static int f71882fg_remove(struct platform_device *pdev)
>   static int __init f71882fg_find_watchdog(int sioaddr,
>   	const struct f71882fg_sio_data *sio_data)
>   {
> +	int err = 0;
> +
>   	switch (sio_data->type) {
>   	case f71808fg:
> +		watchdog = kzalloc(sizeof(*watchdog), GFP_KERNEL);
> +		if (!watchdog)
> +			return -ENOMEM;
> +
> +		mutex_init(&watchdog->lock);
> +		watchdog->sioaddr = sioaddr;
> +		watchdog->type = sio_data->type;
> +
> +		watchdog->ident.options = WDIOC_SETTIMEOUT
> +					| WDIOF_MAGICCLOSE
> +					| WDIOF_KEEPALIVEPING;
> +		snprintf(watchdog->ident.identity,
> +			sizeof(watchdog->ident.identity), "%s watchdog",
> +			f71882fg_names[watchdog->type]);
> +
> +		err = watchdog_set_timeout(timeout);
> +		if (err)
> +			goto exit_alloc;
> +		err = watchdog_set_pulse_width(pulse_width);
> +		if (err)
> +			goto exit_alloc;
> +
>   		break;
>
>   	case f71862fg:
> @@ -2256,6 +2790,12 @@ static int __init f71882fg_find_watchdog(int sioaddr,
>   	}
>
>   	return 0;
> +
> +exit_alloc:
> +	kfree(watchdog);
> +	watchdog = NULL;
> +
> +	return err;
>   }
>
>   static int __init f71882fg_find_hwmon(int sioaddr, unsigned short *hwmon_addr,
> @@ -2421,6 +2961,12 @@ static int __init f71882fg_init(void)
>   	if (err)
>   		goto exit_driver;
>
> +	if (watchdog) {
> +		err = watchdog_init();
> +		if (err)
> +			goto exit_driver;
> +	}
> +
>   	return 0;
>
>   exit_driver:
> @@ -2433,6 +2979,13 @@ static void __exit f71882fg_exit(void)
>   {
>   	platform_device_unregister(f71882fg_pdev);
>   	platform_driver_unregister(&f71882fg_driver);
> +
> +	if (watchdog) {
> +		watchdog_stop();
> +		misc_deregister(&watchdog_miscdev);
> +		unregister_reboot_notifier(&watchdog_notifier);
> +		release_region(watchdog->sioaddr, 2);
> +	}
>   }
>
>   MODULE_DESCRIPTION("F71882FG Hardware Monitoring Driver");

_______________________________________________
lm-sensors mailing list
lm-sensors@lm-sensors.org
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors