[PATCH 00/21] KVM: PPC: MOL bringup patches v3

[PATCH 00/21] KVM: PPC: MOL bringup patches v3

[Alexander Graf]

Mac-on-Linux has always lacked PPC64 host support. This is going to
change now!

This patchset contains minor patches to enable MOL, but is mostly about
bug fixes that came out of running Mac OS X. With this set and the
current svn version of MOL I have 10.4.11 running as a guest on a 970MP
as well as a PS3 host.


v1 -> v2:

 - Add documentation for EXIT_OSI and ENABLE_CAP
 - Add flags to enable_cap
 - Add build fix for !CONFIG_VSX
 - Remove in-paca register check

v2 -> v3:

 - Document that EXIT_OSI is not migration safe
 - Add CAP for ENABLE_CAP
 - Improve documentation for ENABLE_CAP
 - Add alignment emulation for stfs, stfd, lfd
 - Add alignment DAR emulation
 - Add CAP for unset irq
 - new: Fix dcbz emulation
 - new: Add emulation for dcba
 - new: Add check if pte was mapped secondary (PS3 fix)
 - new: Use ULL for big numbers
 - new: Make bools bitfields
 - new: Disable MSR_FEx for Cell hosts (PS3 speedup)


Alexander Graf (21):
  KVM: PPC: Ensure split mode works
  KVM: PPC: Allow userspace to unset the IRQ line
  KVM: PPC: Make DSISR 32 bits wide
  KVM: PPC: Book3S_32 guest MMU fixes
  KVM: PPC: Split instruction reading out
  KVM: PPC: Don't reload FPU with invalid values
  KVM: PPC: Load VCPU for register fetching
  KVM: PPC: Implement mfsr emulation
  KVM: PPC: Implement BAT reads
  KVM: PPC: Make XER load 32 bit
  KVM: PPC: Implement emulation for lbzux and lhax
  KVM: PPC: Implement alignment interrupt
  KVM: Add support for enabling capabilities per-vcpu
  KVM: PPC: Add OSI hypercall interface
  KVM: PPC: Make build work without CONFIG_VSX/ALTIVEC
  KVM: PPC: Fix dcbz emulation
  KVM: PPC: Add emulation for dcba
  KVM: PPC: Add check if pte was mapped secondary
  KVM: PPC: Use ULL for big numbers
  KVM: PPC: Make bools bitfields
  KVM: PPC: Disable MSR_FEx for Cell hosts

 Documentation/kvm/api.txt               |   54 ++++++++-
 arch/powerpc/include/asm/kvm.h          |    3 +
 arch/powerpc/include/asm/kvm_book3s.h   |   47 +++++---
 arch/powerpc/include/asm/kvm_host.h     |   10 +-
 arch/powerpc/include/asm/kvm_ppc.h      |    2 +
 arch/powerpc/kvm/book3s.c               |  191 +++++++++++++++++++-----------
 arch/powerpc/kvm/book3s_32_mmu.c        |   30 ++++-
 arch/powerpc/kvm/book3s_64_emulate.c    |  146 +++++++++++++++++++++++-
 arch/powerpc/kvm/book3s_64_interrupts.S |    2 +-
 arch/powerpc/kvm/book3s_64_mmu_host.c   |    7 +
 arch/powerpc/kvm/book3s_64_slb.S        |    2 +-
 arch/powerpc/kvm/emulate.c              |   20 ++++
 arch/powerpc/kvm/powerpc.c              |   45 +++++++-
 include/linux/kvm.h                     |   19 +++
 14 files changed, 468 insertions(+), 110 deletions(-)

[PATCH 00/21] KVM: PPC: MOL bringup patches v3

[Alexander Graf]

Mac-on-Linux has always lacked PPC64 host support. This is going to
change now!

This patchset contains minor patches to enable MOL, but is mostly about
bug fixes that came out of running Mac OS X. With this set and the
current svn version of MOL I have 10.4.11 running as a guest on a 970MP
as well as a PS3 host.


v1 -> v2:

 - Add documentation for EXIT_OSI and ENABLE_CAP
 - Add flags to enable_cap
 - Add build fix for !CONFIG_VSX
 - Remove in-paca register check

v2 -> v3:

 - Document that EXIT_OSI is not migration safe
 - Add CAP for ENABLE_CAP
 - Improve documentation for ENABLE_CAP
 - Add alignment emulation for stfs, stfd, lfd
 - Add alignment DAR emulation
 - Add CAP for unset irq
 - new: Fix dcbz emulation
 - new: Add emulation for dcba
 - new: Add check if pte was mapped secondary (PS3 fix)
 - new: Use ULL for big numbers
 - new: Make bools bitfields
 - new: Disable MSR_FEx for Cell hosts (PS3 speedup)


Alexander Graf (21):
  KVM: PPC: Ensure split mode works
  KVM: PPC: Allow userspace to unset the IRQ line
  KVM: PPC: Make DSISR 32 bits wide
  KVM: PPC: Book3S_32 guest MMU fixes
  KVM: PPC: Split instruction reading out
  KVM: PPC: Don't reload FPU with invalid values
  KVM: PPC: Load VCPU for register fetching
  KVM: PPC: Implement mfsr emulation
  KVM: PPC: Implement BAT reads
  KVM: PPC: Make XER load 32 bit
  KVM: PPC: Implement emulation for lbzux and lhax
  KVM: PPC: Implement alignment interrupt
  KVM: Add support for enabling capabilities per-vcpu
  KVM: PPC: Add OSI hypercall interface
  KVM: PPC: Make build work without CONFIG_VSX/ALTIVEC
  KVM: PPC: Fix dcbz emulation
  KVM: PPC: Add emulation for dcba
  KVM: PPC: Add check if pte was mapped secondary
  KVM: PPC: Use ULL for big numbers
  KVM: PPC: Make bools bitfields
  KVM: PPC: Disable MSR_FEx for Cell hosts

 Documentation/kvm/api.txt               |   54 ++++++++-
 arch/powerpc/include/asm/kvm.h          |    3 +
 arch/powerpc/include/asm/kvm_book3s.h   |   47 +++++---
 arch/powerpc/include/asm/kvm_host.h     |   10 +-
 arch/powerpc/include/asm/kvm_ppc.h      |    2 +
 arch/powerpc/kvm/book3s.c               |  191 +++++++++++++++++++-----------
 arch/powerpc/kvm/book3s_32_mmu.c        |   30 ++++-
 arch/powerpc/kvm/book3s_64_emulate.c    |  146 +++++++++++++++++++++++-
 arch/powerpc/kvm/book3s_64_interrupts.S |    2 +-
 arch/powerpc/kvm/book3s_64_mmu_host.c   |    7 +
 arch/powerpc/kvm/book3s_64_slb.S        |    2 +-
 arch/powerpc/kvm/emulate.c              |   20 ++++
 arch/powerpc/kvm/powerpc.c              |   45 +++++++-
 include/linux/kvm.h                     |   19 +++
 14 files changed, 468 insertions(+), 110 deletions(-)

[PATCH 05/21] KVM: PPC: Split instruction reading out

[Alexander Graf]

The current check_ext function reads the instruction and then does
the checking. Let's split the reading out so we can reuse it for
different functions.

Signed-off-by: Alexander Graf <agraf@suse.de>
---
 arch/powerpc/kvm/book3s.c |   24 ++++++++++++++++--------
 1 files changed, 16 insertions(+), 8 deletions(-)

diff --git a/arch/powerpc/kvm/book3s.c b/arch/powerpc/kvm/book3s.c
index 9e0bc47..400ae0a 100644
--- a/arch/powerpc/kvm/book3s.c
+++ b/arch/powerpc/kvm/book3s.c
@@ -650,26 +650,34 @@ void kvmppc_giveup_ext(struct kvm_vcpu *vcpu, ulong msr)
 	kvmppc_recalc_shadow_msr(vcpu);
 }
 
-static int kvmppc_check_ext(struct kvm_vcpu *vcpu, unsigned int exit_nr)
+static int kvmppc_read_inst(struct kvm_vcpu *vcpu)
 {
 	ulong srr0 = vcpu->arch.pc;
 	int ret;
 
-	/* Need to do paired single emulation? */
-	if (!(vcpu->arch.hflags & BOOK3S_HFLAG_PAIRED_SINGLE))
-		return EMULATE_DONE;
-
-	/* Read out the instruction */
 	ret = kvmppc_ld(vcpu, &srr0, sizeof(u32), &vcpu->arch.last_inst, false);
 	if (ret = -ENOENT) {
 		vcpu->arch.msr = kvmppc_set_field(vcpu->arch.msr, 33, 33, 1);
 		vcpu->arch.msr = kvmppc_set_field(vcpu->arch.msr, 34, 36, 0);
 		vcpu->arch.msr = kvmppc_set_field(vcpu->arch.msr, 42, 47, 0);
 		kvmppc_book3s_queue_irqprio(vcpu, BOOK3S_INTERRUPT_INST_STORAGE);
-	} else if(ret = EMULATE_DONE) {
+		return EMULATE_AGAIN;
+	}
+
+	return EMULATE_DONE;
+}
+
+static int kvmppc_check_ext(struct kvm_vcpu *vcpu, unsigned int exit_nr)
+{
+
+	/* Need to do paired single emulation? */
+	if (!(vcpu->arch.hflags & BOOK3S_HFLAG_PAIRED_SINGLE))
+		return EMULATE_DONE;
+
+	/* Read out the instruction */
+	if (kvmppc_read_inst(vcpu) = EMULATE_DONE)
 		/* Need to emulate */
 		return EMULATE_FAIL;
-	}
 
 	return EMULATE_AGAIN;
 }
-- 
1.6.0.2

[PATCH 05/21] KVM: PPC: Split instruction reading out

[Alexander Graf]

The current check_ext function reads the instruction and then does
the checking. Let's split the reading out so we can reuse it for
different functions.

Signed-off-by: Alexander Graf <agraf@suse.de>
---
 arch/powerpc/kvm/book3s.c |   24 ++++++++++++++++--------
 1 files changed, 16 insertions(+), 8 deletions(-)

diff --git a/arch/powerpc/kvm/book3s.c b/arch/powerpc/kvm/book3s.c
index 9e0bc47..400ae0a 100644
--- a/arch/powerpc/kvm/book3s.c
+++ b/arch/powerpc/kvm/book3s.c
@@ -650,26 +650,34 @@ void kvmppc_giveup_ext(struct kvm_vcpu *vcpu, ulong msr)
 	kvmppc_recalc_shadow_msr(vcpu);
 }
 
-static int kvmppc_check_ext(struct kvm_vcpu *vcpu, unsigned int exit_nr)
+static int kvmppc_read_inst(struct kvm_vcpu *vcpu)
 {
 	ulong srr0 = vcpu->arch.pc;
 	int ret;
 
-	/* Need to do paired single emulation? */
-	if (!(vcpu->arch.hflags & BOOK3S_HFLAG_PAIRED_SINGLE))
-		return EMULATE_DONE;
-
-	/* Read out the instruction */
 	ret = kvmppc_ld(vcpu, &srr0, sizeof(u32), &vcpu->arch.last_inst, false);
 	if (ret == -ENOENT) {
 		vcpu->arch.msr = kvmppc_set_field(vcpu->arch.msr, 33, 33, 1);
 		vcpu->arch.msr = kvmppc_set_field(vcpu->arch.msr, 34, 36, 0);
 		vcpu->arch.msr = kvmppc_set_field(vcpu->arch.msr, 42, 47, 0);
 		kvmppc_book3s_queue_irqprio(vcpu, BOOK3S_INTERRUPT_INST_STORAGE);
-	} else if(ret == EMULATE_DONE) {
+		return EMULATE_AGAIN;
+	}
+
+	return EMULATE_DONE;
+}
+
+static int kvmppc_check_ext(struct kvm_vcpu *vcpu, unsigned int exit_nr)
+{
+
+	/* Need to do paired single emulation? */
+	if (!(vcpu->arch.hflags & BOOK3S_HFLAG_PAIRED_SINGLE))
+		return EMULATE_DONE;
+
+	/* Read out the instruction */
+	if (kvmppc_read_inst(vcpu) == EMULATE_DONE)
 		/* Need to emulate */
 		return EMULATE_FAIL;
-	}
 
 	return EMULATE_AGAIN;
 }
-- 
1.6.0.2

[PATCH 01/21] KVM: PPC: Ensure split mode works

[Alexander Graf]

On PowerPC we can go into MMU Split Mode. That means that either
data relocation is on but instruction relocation is off or vice
versa.

That mode didn't work properly, as we weren't always flushing
entries when going into a new split mode, potentially mapping
different code or data that we're supposed to.

Signed-off-by: Alexander Graf <agraf@suse.de>
---
 arch/powerpc/include/asm/kvm_book3s.h |    9 +++---
 arch/powerpc/kvm/book3s.c             |   46 +++++++++++++++++---------------
 2 files changed, 29 insertions(+), 26 deletions(-)

diff --git a/arch/powerpc/include/asm/kvm_book3s.h b/arch/powerpc/include/asm/kvm_book3s.h
index e6ea974..14d0262 100644
--- a/arch/powerpc/include/asm/kvm_book3s.h
+++ b/arch/powerpc/include/asm/kvm_book3s.h
@@ -99,10 +99,11 @@ struct kvmppc_vcpu_book3s {
 #define CONTEXT_GUEST		1
 #define CONTEXT_GUEST_END	2
 
-#define VSID_REAL	0xfffffffffff00000
-#define VSID_REAL_DR	0xffffffffffe00000
-#define VSID_REAL_IR	0xffffffffffd00000
-#define VSID_BAT	0xffffffffffc00000
+#define VSID_REAL_DR	0x7ffffffffff00000
+#define VSID_REAL_IR	0x7fffffffffe00000
+#define VSID_SPLIT_MASK	0x7fffffffffe00000
+#define VSID_REAL	0x7fffffffffc00000
+#define VSID_BAT	0x7fffffffffb00000
 #define VSID_PR		0x8000000000000000
 
 extern void kvmppc_mmu_pte_flush(struct kvm_vcpu *vcpu, u64 ea, u64 ea_mask);
diff --git a/arch/powerpc/kvm/book3s.c b/arch/powerpc/kvm/book3s.c
index 94c229d..c2ffb91 100644
--- a/arch/powerpc/kvm/book3s.c
+++ b/arch/powerpc/kvm/book3s.c
@@ -133,6 +133,14 @@ void kvmppc_set_msr(struct kvm_vcpu *vcpu, u64 msr)
 
 	if (((vcpu->arch.msr & (MSR_IR|MSR_DR)) != (old_msr & (MSR_IR|MSR_DR))) ||
 	    (vcpu->arch.msr & MSR_PR) != (old_msr & MSR_PR)) {
+		bool dr = (vcpu->arch.msr & MSR_DR) ? true : false;
+		bool ir = (vcpu->arch.msr & MSR_IR) ? true : false;
+
+		/* Flush split mode PTEs */
+		if (dr != ir)
+			kvmppc_mmu_pte_vflush(vcpu, VSID_SPLIT_MASK,
+					      VSID_SPLIT_MASK);
+
 		kvmppc_mmu_flush_segments(vcpu);
 		kvmppc_mmu_map_segment(vcpu, vcpu->arch.pc);
 	}
@@ -395,15 +403,7 @@ static int kvmppc_xlate(struct kvm_vcpu *vcpu, ulong eaddr, bool data,
 	} else {
 		pte->eaddr = eaddr;
 		pte->raddr = eaddr & 0xffffffff;
-		pte->vpage = eaddr >> 12;
-		switch (vcpu->arch.msr & (MSR_DR|MSR_IR)) {
-		case 0:
-			pte->vpage |= VSID_REAL;
-		case MSR_DR:
-			pte->vpage |= VSID_REAL_DR;
-		case MSR_IR:
-			pte->vpage |= VSID_REAL_IR;
-		}
+		pte->vpage = VSID_REAL | eaddr >> 12;
 		pte->may_read = true;
 		pte->may_write = true;
 		pte->may_execute = true;
@@ -512,12 +512,10 @@ int kvmppc_handle_pagefault(struct kvm_run *run, struct kvm_vcpu *vcpu,
 	int page_found = 0;
 	struct kvmppc_pte pte;
 	bool is_mmio = false;
+	bool dr = (vcpu->arch.msr & MSR_DR) ? true : false;
+	bool ir = (vcpu->arch.msr & MSR_IR) ? true : false;
 
-	if ( vec = BOOK3S_INTERRUPT_DATA_STORAGE ) {
-		relocated = (vcpu->arch.msr & MSR_DR);
-	} else {
-		relocated = (vcpu->arch.msr & MSR_IR);
-	}
+	relocated = data ? dr : ir;
 
 	/* Resolve real address if translation turned on */
 	if (relocated) {
@@ -529,14 +527,18 @@ int kvmppc_handle_pagefault(struct kvm_run *run, struct kvm_vcpu *vcpu,
 		pte.raddr = eaddr & 0xffffffff;
 		pte.eaddr = eaddr;
 		pte.vpage = eaddr >> 12;
-		switch (vcpu->arch.msr & (MSR_DR|MSR_IR)) {
-		case 0:
-			pte.vpage |= VSID_REAL;
-		case MSR_DR:
-			pte.vpage |= VSID_REAL_DR;
-		case MSR_IR:
-			pte.vpage |= VSID_REAL_IR;
-		}
+	}
+
+	switch (vcpu->arch.msr & (MSR_DR|MSR_IR)) {
+	case 0:
+		pte.vpage |= VSID_REAL;
+		break;
+	case MSR_DR:
+		pte.vpage |= VSID_REAL_DR;
+		break;
+	case MSR_IR:
+		pte.vpage |= VSID_REAL_IR;
+		break;
 	}
 
 	if (vcpu->arch.mmu.is_dcbz32(vcpu) &&
-- 
1.6.0.2

[PATCH 01/21] KVM: PPC: Ensure split mode works

[Alexander Graf]

On PowerPC we can go into MMU Split Mode. That means that either
data relocation is on but instruction relocation is off or vice
versa.

That mode didn't work properly, as we weren't always flushing
entries when going into a new split mode, potentially mapping
different code or data that we're supposed to.

Signed-off-by: Alexander Graf <agraf-l3A5Bk7waGM@public.gmane.org>
---
 arch/powerpc/include/asm/kvm_book3s.h |    9 +++---
 arch/powerpc/kvm/book3s.c             |   46 +++++++++++++++++---------------
 2 files changed, 29 insertions(+), 26 deletions(-)

diff --git a/arch/powerpc/include/asm/kvm_book3s.h b/arch/powerpc/include/asm/kvm_book3s.h
index e6ea974..14d0262 100644
--- a/arch/powerpc/include/asm/kvm_book3s.h
+++ b/arch/powerpc/include/asm/kvm_book3s.h
@@ -99,10 +99,11 @@ struct kvmppc_vcpu_book3s {
 #define CONTEXT_GUEST		1
 #define CONTEXT_GUEST_END	2
 
-#define VSID_REAL	0xfffffffffff00000
-#define VSID_REAL_DR	0xffffffffffe00000
-#define VSID_REAL_IR	0xffffffffffd00000
-#define VSID_BAT	0xffffffffffc00000
+#define VSID_REAL_DR	0x7ffffffffff00000
+#define VSID_REAL_IR	0x7fffffffffe00000
+#define VSID_SPLIT_MASK	0x7fffffffffe00000
+#define VSID_REAL	0x7fffffffffc00000
+#define VSID_BAT	0x7fffffffffb00000
 #define VSID_PR		0x8000000000000000
 
 extern void kvmppc_mmu_pte_flush(struct kvm_vcpu *vcpu, u64 ea, u64 ea_mask);
diff --git a/arch/powerpc/kvm/book3s.c b/arch/powerpc/kvm/book3s.c
index 94c229d..c2ffb91 100644
--- a/arch/powerpc/kvm/book3s.c
+++ b/arch/powerpc/kvm/book3s.c
@@ -133,6 +133,14 @@ void kvmppc_set_msr(struct kvm_vcpu *vcpu, u64 msr)
 
 	if (((vcpu->arch.msr & (MSR_IR|MSR_DR)) != (old_msr & (MSR_IR|MSR_DR))) ||
 	    (vcpu->arch.msr & MSR_PR) != (old_msr & MSR_PR)) {
+		bool dr = (vcpu->arch.msr & MSR_DR) ? true : false;
+		bool ir = (vcpu->arch.msr & MSR_IR) ? true : false;
+
+		/* Flush split mode PTEs */
+		if (dr != ir)
+			kvmppc_mmu_pte_vflush(vcpu, VSID_SPLIT_MASK,
+					      VSID_SPLIT_MASK);
+
 		kvmppc_mmu_flush_segments(vcpu);
 		kvmppc_mmu_map_segment(vcpu, vcpu->arch.pc);
 	}
@@ -395,15 +403,7 @@ static int kvmppc_xlate(struct kvm_vcpu *vcpu, ulong eaddr, bool data,
 	} else {
 		pte->eaddr = eaddr;
 		pte->raddr = eaddr & 0xffffffff;
-		pte->vpage = eaddr >> 12;
-		switch (vcpu->arch.msr & (MSR_DR|MSR_IR)) {
-		case 0:
-			pte->vpage |= VSID_REAL;
-		case MSR_DR:
-			pte->vpage |= VSID_REAL_DR;
-		case MSR_IR:
-			pte->vpage |= VSID_REAL_IR;
-		}
+		pte->vpage = VSID_REAL | eaddr >> 12;
 		pte->may_read = true;
 		pte->may_write = true;
 		pte->may_execute = true;
@@ -512,12 +512,10 @@ int kvmppc_handle_pagefault(struct kvm_run *run, struct kvm_vcpu *vcpu,
 	int page_found = 0;
 	struct kvmppc_pte pte;
 	bool is_mmio = false;
+	bool dr = (vcpu->arch.msr & MSR_DR) ? true : false;
+	bool ir = (vcpu->arch.msr & MSR_IR) ? true : false;
 
-	if ( vec == BOOK3S_INTERRUPT_DATA_STORAGE ) {
-		relocated = (vcpu->arch.msr & MSR_DR);
-	} else {
-		relocated = (vcpu->arch.msr & MSR_IR);
-	}
+	relocated = data ? dr : ir;
 
 	/* Resolve real address if translation turned on */
 	if (relocated) {
@@ -529,14 +527,18 @@ int kvmppc_handle_pagefault(struct kvm_run *run, struct kvm_vcpu *vcpu,
 		pte.raddr = eaddr & 0xffffffff;
 		pte.eaddr = eaddr;
 		pte.vpage = eaddr >> 12;
-		switch (vcpu->arch.msr & (MSR_DR|MSR_IR)) {
-		case 0:
-			pte.vpage |= VSID_REAL;
-		case MSR_DR:
-			pte.vpage |= VSID_REAL_DR;
-		case MSR_IR:
-			pte.vpage |= VSID_REAL_IR;
-		}
+	}
+
+	switch (vcpu->arch.msr & (MSR_DR|MSR_IR)) {
+	case 0:
+		pte.vpage |= VSID_REAL;
+		break;
+	case MSR_DR:
+		pte.vpage |= VSID_REAL_DR;
+		break;
+	case MSR_IR:
+		pte.vpage |= VSID_REAL_IR;
+		break;
 	}
 
 	if (vcpu->arch.mmu.is_dcbz32(vcpu) &&
-- 
1.6.0.2

[PATCH 02/21] KVM: PPC: Allow userspace to unset the IRQ line

Userspace can tell us that it wants to trigger an interrupt. But
so far it can't tell us that it wants to stop triggering one.

So let's interpret the parameter to the ioctl that we have anyways
to tell us if we want to raise or lower the interrupt line.

Signed-off-by: Alexander Graf <agraf@suse.de>

v2 -> v3:

 - Add CAP for unset irq
---
 arch/powerpc/include/asm/kvm.h     |    3 +++
 arch/powerpc/include/asm/kvm_ppc.h |    2 ++
 arch/powerpc/kvm/book3s.c          |    6 ++++++
 arch/powerpc/kvm/powerpc.c         |    6 +++++-
 include/linux/kvm.h                |    1 +
 5 files changed, 17 insertions(+), 1 deletions(-)

diff --git a/arch/powerpc/include/asm/kvm.h b/arch/powerpc/include/asm/kvm.h
index 19bae31..6c5547d 100644
--- a/arch/powerpc/include/asm/kvm.h
+++ b/arch/powerpc/include/asm/kvm.h
@@ -84,4 +84,7 @@ struct kvm_guest_debug_arch {
 #define KVM_REG_QPR		0x0040
 #define KVM_REG_FQPR		0x0060
 
+#define KVM_INTERRUPT_SET	-1U
+#define KVM_INTERRUPT_UNSET	-2U
+
 #endif /* __LINUX_KVM_POWERPC_H */
diff --git a/arch/powerpc/include/asm/kvm_ppc.h b/arch/powerpc/include/asm/kvm_ppc.h
index c7fcdd7..6a2464e 100644
--- a/arch/powerpc/include/asm/kvm_ppc.h
+++ b/arch/powerpc/include/asm/kvm_ppc.h
@@ -92,6 +92,8 @@ extern void kvmppc_core_queue_dec(struct kvm_vcpu *vcpu);
 extern void kvmppc_core_dequeue_dec(struct kvm_vcpu *vcpu);
 extern void kvmppc_core_queue_external(struct kvm_vcpu *vcpu,
                                        struct kvm_interrupt *irq);
+extern void kvmppc_core_dequeue_external(struct kvm_vcpu *vcpu,
+                                         struct kvm_interrupt *irq);
 
 extern int kvmppc_core_emulate_op(struct kvm_run *run, struct kvm_vcpu *vcpu,
                                   unsigned int op, int *advance);
diff --git a/arch/powerpc/kvm/book3s.c b/arch/powerpc/kvm/book3s.c
index c2ffb91..9e0bc47 100644
--- a/arch/powerpc/kvm/book3s.c
+++ b/arch/powerpc/kvm/book3s.c
@@ -230,6 +230,12 @@ void kvmppc_core_queue_external(struct kvm_vcpu *vcpu,
 	kvmppc_book3s_queue_irqprio(vcpu, BOOK3S_INTERRUPT_EXTERNAL);
 }
 
+void kvmppc_core_dequeue_external(struct kvm_vcpu *vcpu,
+                                  struct kvm_interrupt *irq)
+{
+	kvmppc_book3s_dequeue_irqprio(vcpu, BOOK3S_INTERRUPT_EXTERNAL);
+}
+
 int kvmppc_book3s_irqprio_deliver(struct kvm_vcpu *vcpu, unsigned int priority)
 {
 	int deliver = 1;
diff --git a/arch/powerpc/kvm/powerpc.c b/arch/powerpc/kvm/powerpc.c
index a0e3172..af873d9 100644
--- a/arch/powerpc/kvm/powerpc.c
+++ b/arch/powerpc/kvm/powerpc.c
@@ -148,6 +148,7 @@ int kvm_dev_ioctl_check_extension(long ext)
 	switch (ext) {
 	case KVM_CAP_PPC_SEGSTATE:
 	case KVM_CAP_PPC_PAIRED_SINGLES:
+	case KVM_CAP_PPC_UNSET_IRQ:
 		r = 1;
 		break;
 	case KVM_CAP_COALESCED_MMIO:
@@ -450,7 +451,10 @@ int kvm_arch_vcpu_ioctl_run(struct kvm_vcpu *vcpu, struct kvm_run *run)
 
 int kvm_vcpu_ioctl_interrupt(struct kvm_vcpu *vcpu, struct kvm_interrupt *irq)
 {
-	kvmppc_core_queue_external(vcpu, irq);
+	if (irq->irq = KVM_INTERRUPT_UNSET)
+		kvmppc_core_dequeue_external(vcpu, irq);
+	else
+		kvmppc_core_queue_external(vcpu, irq);
 
 	if (waitqueue_active(&vcpu->wq)) {
 		wake_up_interruptible(&vcpu->wq);
diff --git a/include/linux/kvm.h b/include/linux/kvm.h
index ce28767..c36d093 100644
--- a/include/linux/kvm.h
+++ b/include/linux/kvm.h
@@ -507,6 +507,7 @@ struct kvm_ioeventfd {
 #define KVM_CAP_DEBUGREGS 50
 #endif
 #define KVM_CAP_X86_ROBUST_SINGLESTEP 51
+#define KVM_CAP_PPC_UNSET_IRQ 53
 
 #ifdef KVM_CAP_IRQ_ROUTING
 
-- 
1.6.0.2

[PATCH 02/21] KVM: PPC: Allow userspace to unset the IRQ line

[Alexander Graf]

Userspace can tell us that it wants to trigger an interrupt. But
so far it can't tell us that it wants to stop triggering one.

So let's interpret the parameter to the ioctl that we have anyways
to tell us if we want to raise or lower the interrupt line.

Signed-off-by: Alexander Graf <agraf-l3A5Bk7waGM@public.gmane.org>

v2 -> v3:

 - Add CAP for unset irq
---
 arch/powerpc/include/asm/kvm.h     |    3 +++
 arch/powerpc/include/asm/kvm_ppc.h |    2 ++
 arch/powerpc/kvm/book3s.c          |    6 ++++++
 arch/powerpc/kvm/powerpc.c         |    6 +++++-
 include/linux/kvm.h                |    1 +
 5 files changed, 17 insertions(+), 1 deletions(-)

diff --git a/arch/powerpc/include/asm/kvm.h b/arch/powerpc/include/asm/kvm.h
index 19bae31..6c5547d 100644
--- a/arch/powerpc/include/asm/kvm.h
+++ b/arch/powerpc/include/asm/kvm.h
@@ -84,4 +84,7 @@ struct kvm_guest_debug_arch {
 #define KVM_REG_QPR		0x0040
 #define KVM_REG_FQPR		0x0060
 
+#define KVM_INTERRUPT_SET	-1U
+#define KVM_INTERRUPT_UNSET	-2U
+
 #endif /* __LINUX_KVM_POWERPC_H */
diff --git a/arch/powerpc/include/asm/kvm_ppc.h b/arch/powerpc/include/asm/kvm_ppc.h
index c7fcdd7..6a2464e 100644
--- a/arch/powerpc/include/asm/kvm_ppc.h
+++ b/arch/powerpc/include/asm/kvm_ppc.h
@@ -92,6 +92,8 @@ extern void kvmppc_core_queue_dec(struct kvm_vcpu *vcpu);
 extern void kvmppc_core_dequeue_dec(struct kvm_vcpu *vcpu);
 extern void kvmppc_core_queue_external(struct kvm_vcpu *vcpu,
                                        struct kvm_interrupt *irq);
+extern void kvmppc_core_dequeue_external(struct kvm_vcpu *vcpu,
+                                         struct kvm_interrupt *irq);
 
 extern int kvmppc_core_emulate_op(struct kvm_run *run, struct kvm_vcpu *vcpu,
                                   unsigned int op, int *advance);
diff --git a/arch/powerpc/kvm/book3s.c b/arch/powerpc/kvm/book3s.c
index c2ffb91..9e0bc47 100644
--- a/arch/powerpc/kvm/book3s.c
+++ b/arch/powerpc/kvm/book3s.c
@@ -230,6 +230,12 @@ void kvmppc_core_queue_external(struct kvm_vcpu *vcpu,
 	kvmppc_book3s_queue_irqprio(vcpu, BOOK3S_INTERRUPT_EXTERNAL);
 }
 
+void kvmppc_core_dequeue_external(struct kvm_vcpu *vcpu,
+                                  struct kvm_interrupt *irq)
+{
+	kvmppc_book3s_dequeue_irqprio(vcpu, BOOK3S_INTERRUPT_EXTERNAL);
+}
+
 int kvmppc_book3s_irqprio_deliver(struct kvm_vcpu *vcpu, unsigned int priority)
 {
 	int deliver = 1;
diff --git a/arch/powerpc/kvm/powerpc.c b/arch/powerpc/kvm/powerpc.c
index a0e3172..af873d9 100644
--- a/arch/powerpc/kvm/powerpc.c
+++ b/arch/powerpc/kvm/powerpc.c
@@ -148,6 +148,7 @@ int kvm_dev_ioctl_check_extension(long ext)
 	switch (ext) {
 	case KVM_CAP_PPC_SEGSTATE:
 	case KVM_CAP_PPC_PAIRED_SINGLES:
+	case KVM_CAP_PPC_UNSET_IRQ:
 		r = 1;
 		break;
 	case KVM_CAP_COALESCED_MMIO:
@@ -450,7 +451,10 @@ int kvm_arch_vcpu_ioctl_run(struct kvm_vcpu *vcpu, struct kvm_run *run)
 
 int kvm_vcpu_ioctl_interrupt(struct kvm_vcpu *vcpu, struct kvm_interrupt *irq)
 {
-	kvmppc_core_queue_external(vcpu, irq);
+	if (irq->irq == KVM_INTERRUPT_UNSET)
+		kvmppc_core_dequeue_external(vcpu, irq);
+	else
+		kvmppc_core_queue_external(vcpu, irq);
 
 	if (waitqueue_active(&vcpu->wq)) {
 		wake_up_interruptible(&vcpu->wq);
diff --git a/include/linux/kvm.h b/include/linux/kvm.h
index ce28767..c36d093 100644
--- a/include/linux/kvm.h
+++ b/include/linux/kvm.h
@@ -507,6 +507,7 @@ struct kvm_ioeventfd {
 #define KVM_CAP_DEBUGREGS 50
 #endif
 #define KVM_CAP_X86_ROBUST_SINGLESTEP 51
+#define KVM_CAP_PPC_UNSET_IRQ 53
 
 #ifdef KVM_CAP_IRQ_ROUTING
 
-- 
1.6.0.2

[PATCH 03/21] KVM: PPC: Make DSISR 32 bits wide

[Alexander Graf]

DSISR is only defined as 32 bits wide. So let's reflect that in the
structs too.

Signed-off-by: Alexander Graf <agraf@suse.de>
---
 arch/powerpc/include/asm/kvm_book3s.h   |    2 +-
 arch/powerpc/include/asm/kvm_host.h     |    2 +-
 arch/powerpc/kvm/book3s_64_interrupts.S |    2 +-
 3 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/powerpc/include/asm/kvm_book3s.h b/arch/powerpc/include/asm/kvm_book3s.h
index 14d0262..9f5a992 100644
--- a/arch/powerpc/include/asm/kvm_book3s.h
+++ b/arch/powerpc/include/asm/kvm_book3s.h
@@ -84,8 +84,8 @@ struct kvmppc_vcpu_book3s {
 	u64 hid[6];
 	u64 gqr[8];
 	int slb_nr;
+	u32 dsisr;
 	u64 sdr1;
-	u64 dsisr;
 	u64 hior;
 	u64 msr_mask;
 	u64 vsid_first;
diff --git a/arch/powerpc/include/asm/kvm_host.h b/arch/powerpc/include/asm/kvm_host.h
index 119deb4..0ebda67 100644
--- a/arch/powerpc/include/asm/kvm_host.h
+++ b/arch/powerpc/include/asm/kvm_host.h
@@ -260,7 +260,7 @@ struct kvm_vcpu_arch {
 
 	u32 last_inst;
 #ifdef CONFIG_PPC64
-	ulong fault_dsisr;
+	u32 fault_dsisr;
 #endif
 	ulong fault_dear;
 	ulong fault_esr;
diff --git a/arch/powerpc/kvm/book3s_64_interrupts.S b/arch/powerpc/kvm/book3s_64_interrupts.S
index c1584d0..faca876 100644
--- a/arch/powerpc/kvm/book3s_64_interrupts.S
+++ b/arch/powerpc/kvm/book3s_64_interrupts.S
@@ -171,7 +171,7 @@ kvmppc_handler_highmem:
 	std	r3, VCPU_PC(r7)
 	std	r4, VCPU_SHADOW_SRR1(r7)
 	std	r5, VCPU_FAULT_DEAR(r7)
-	std	r6, VCPU_FAULT_DSISR(r7)
+	stw	r6, VCPU_FAULT_DSISR(r7)
 
 	ld	r5, VCPU_HFLAGS(r7)
 	rldicl.	r5, r5, 0, 63		/* CR = ((r5 & 1) = 0) */
-- 
1.6.0.2

[PATCH 03/21] KVM: PPC: Make DSISR 32 bits wide

[Alexander Graf]

DSISR is only defined as 32 bits wide. So let's reflect that in the
structs too.

Signed-off-by: Alexander Graf <agraf-l3A5Bk7waGM@public.gmane.org>
---
 arch/powerpc/include/asm/kvm_book3s.h   |    2 +-
 arch/powerpc/include/asm/kvm_host.h     |    2 +-
 arch/powerpc/kvm/book3s_64_interrupts.S |    2 +-
 3 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/powerpc/include/asm/kvm_book3s.h b/arch/powerpc/include/asm/kvm_book3s.h
index 14d0262..9f5a992 100644
--- a/arch/powerpc/include/asm/kvm_book3s.h
+++ b/arch/powerpc/include/asm/kvm_book3s.h
@@ -84,8 +84,8 @@ struct kvmppc_vcpu_book3s {
 	u64 hid[6];
 	u64 gqr[8];
 	int slb_nr;
+	u32 dsisr;
 	u64 sdr1;
-	u64 dsisr;
 	u64 hior;
 	u64 msr_mask;
 	u64 vsid_first;
diff --git a/arch/powerpc/include/asm/kvm_host.h b/arch/powerpc/include/asm/kvm_host.h
index 119deb4..0ebda67 100644
--- a/arch/powerpc/include/asm/kvm_host.h
+++ b/arch/powerpc/include/asm/kvm_host.h
@@ -260,7 +260,7 @@ struct kvm_vcpu_arch {
 
 	u32 last_inst;
 #ifdef CONFIG_PPC64
-	ulong fault_dsisr;
+	u32 fault_dsisr;
 #endif
 	ulong fault_dear;
 	ulong fault_esr;
diff --git a/arch/powerpc/kvm/book3s_64_interrupts.S b/arch/powerpc/kvm/book3s_64_interrupts.S
index c1584d0..faca876 100644
--- a/arch/powerpc/kvm/book3s_64_interrupts.S
+++ b/arch/powerpc/kvm/book3s_64_interrupts.S
@@ -171,7 +171,7 @@ kvmppc_handler_highmem:
 	std	r3, VCPU_PC(r7)
 	std	r4, VCPU_SHADOW_SRR1(r7)
 	std	r5, VCPU_FAULT_DEAR(r7)
-	std	r6, VCPU_FAULT_DSISR(r7)
+	stw	r6, VCPU_FAULT_DSISR(r7)
 
 	ld	r5, VCPU_HFLAGS(r7)
 	rldicl.	r5, r5, 0, 63		/* CR = ((r5 & 1) == 0) */
-- 
1.6.0.2

[PATCH 04/21] KVM: PPC: Book3S_32 guest MMU fixes

[Alexander Graf]

This patch makes the VSID of mapped pages always reflecting all special cases
we have, like split mode.

It also changes the tlbie mask to 0x0ffff000 according to the spec. The mask
we used before was incorrect.

Signed-off-by: Alexander Graf <agraf@suse.de>
---
 arch/powerpc/include/asm/kvm_book3s.h |    1 +
 arch/powerpc/kvm/book3s_32_mmu.c      |   30 +++++++++++++++++++++++-------
 2 files changed, 24 insertions(+), 7 deletions(-)

diff --git a/arch/powerpc/include/asm/kvm_book3s.h b/arch/powerpc/include/asm/kvm_book3s.h
index 9f5a992..b47b2f5 100644
--- a/arch/powerpc/include/asm/kvm_book3s.h
+++ b/arch/powerpc/include/asm/kvm_book3s.h
@@ -44,6 +44,7 @@ struct kvmppc_sr {
 	bool Ks;
 	bool Kp;
 	bool nx;
+	bool valid;
 };
 
 struct kvmppc_bat {
diff --git a/arch/powerpc/kvm/book3s_32_mmu.c b/arch/powerpc/kvm/book3s_32_mmu.c
index 1483a9b..7071e22 100644
--- a/arch/powerpc/kvm/book3s_32_mmu.c
+++ b/arch/powerpc/kvm/book3s_32_mmu.c
@@ -57,6 +57,8 @@ static inline bool check_debug_ip(struct kvm_vcpu *vcpu)
 
 static int kvmppc_mmu_book3s_32_xlate_bat(struct kvm_vcpu *vcpu, gva_t eaddr,
 					  struct kvmppc_pte *pte, bool data);
+static int kvmppc_mmu_book3s_32_esid_to_vsid(struct kvm_vcpu *vcpu, u64 esid,
+					     u64 *vsid);
 
 static struct kvmppc_sr *find_sr(struct kvmppc_vcpu_book3s *vcpu_book3s, gva_t eaddr)
 {
@@ -66,13 +68,14 @@ static struct kvmppc_sr *find_sr(struct kvmppc_vcpu_book3s *vcpu_book3s, gva_t e
 static u64 kvmppc_mmu_book3s_32_ea_to_vp(struct kvm_vcpu *vcpu, gva_t eaddr,
 					 bool data)
 {
-	struct kvmppc_sr *sre = find_sr(to_book3s(vcpu), eaddr);
+	u64 vsid;
 	struct kvmppc_pte pte;
 
 	if (!kvmppc_mmu_book3s_32_xlate_bat(vcpu, eaddr, &pte, data))
 		return pte.vpage;
 
-	return (((u64)eaddr >> 12) & 0xffff) | (((u64)sre->vsid) << 16);
+	kvmppc_mmu_book3s_32_esid_to_vsid(vcpu, eaddr >> SID_SHIFT, &vsid);
+	return (((u64)eaddr >> 12) & 0xffff) | (vsid << 16);
 }
 
 static void kvmppc_mmu_book3s_32_reset_msr(struct kvm_vcpu *vcpu)
@@ -142,8 +145,13 @@ static int kvmppc_mmu_book3s_32_xlate_bat(struct kvm_vcpu *vcpu, gva_t eaddr,
 				    bat->bepi_mask);
 		}
 		if ((eaddr & bat->bepi_mask) = bat->bepi) {
+			u64 vsid;
+			kvmppc_mmu_book3s_32_esid_to_vsid(vcpu,
+				eaddr >> SID_SHIFT, &vsid);
+			vsid <<= 16;
+			pte->vpage = (((u64)eaddr >> 12) & 0xffff) | vsid;
+
 			pte->raddr = bat->brpn | (eaddr & ~bat->bepi_mask);
-			pte->vpage = (eaddr >> 12) | VSID_BAT;
 			pte->may_read = bat->pp;
 			pte->may_write = bat->pp > 1;
 			pte->may_execute = true;
@@ -302,6 +310,7 @@ static void kvmppc_mmu_book3s_32_mtsrin(struct kvm_vcpu *vcpu, u32 srnum,
 	/* And then put in the new SR */
 	sre->raw = value;
 	sre->vsid = (value & 0x0fffffff);
+	sre->valid = (value & 0x80000000) ? false : true;
 	sre->Ks = (value & 0x40000000) ? true : false;
 	sre->Kp = (value & 0x20000000) ? true : false;
 	sre->nx = (value & 0x10000000) ? true : false;
@@ -312,7 +321,7 @@ static void kvmppc_mmu_book3s_32_mtsrin(struct kvm_vcpu *vcpu, u32 srnum,
 
 static void kvmppc_mmu_book3s_32_tlbie(struct kvm_vcpu *vcpu, ulong ea, bool large)
 {
-	kvmppc_mmu_pte_flush(vcpu, ea, ~0xFFFULL);
+	kvmppc_mmu_pte_flush(vcpu, ea, 0x0FFFF000);
 }
 
 static int kvmppc_mmu_book3s_32_esid_to_vsid(struct kvm_vcpu *vcpu, u64 esid,
@@ -333,15 +342,22 @@ static int kvmppc_mmu_book3s_32_esid_to_vsid(struct kvm_vcpu *vcpu, u64 esid,
 		break;
 	case MSR_DR|MSR_IR:
 	{
-		ulong ea;
-		ea = esid << SID_SHIFT;
-		*vsid = find_sr(to_book3s(vcpu), ea)->vsid;
+		ulong ea = esid << SID_SHIFT;
+		struct kvmppc_sr *sr = find_sr(to_book3s(vcpu), ea);
+
+		if (!sr->valid)
+			return -1;
+
+		*vsid = sr->vsid;
 		break;
 	}
 	default:
 		BUG();
 	}
 
+	if (vcpu->arch.msr & MSR_PR)
+		*vsid |= VSID_PR;
+
 	return 0;
 }
 
-- 
1.6.0.2

[PATCH 04/21] KVM: PPC: Book3S_32 guest MMU fixes

[Alexander Graf]

This patch makes the VSID of mapped pages always reflecting all special cases
we have, like split mode.

It also changes the tlbie mask to 0x0ffff000 according to the spec. The mask
we used before was incorrect.

Signed-off-by: Alexander Graf <agraf-l3A5Bk7waGM@public.gmane.org>
---
 arch/powerpc/include/asm/kvm_book3s.h |    1 +
 arch/powerpc/kvm/book3s_32_mmu.c      |   30 +++++++++++++++++++++++-------
 2 files changed, 24 insertions(+), 7 deletions(-)

diff --git a/arch/powerpc/include/asm/kvm_book3s.h b/arch/powerpc/include/asm/kvm_book3s.h
index 9f5a992..b47b2f5 100644
--- a/arch/powerpc/include/asm/kvm_book3s.h
+++ b/arch/powerpc/include/asm/kvm_book3s.h
@@ -44,6 +44,7 @@ struct kvmppc_sr {
 	bool Ks;
 	bool Kp;
 	bool nx;
+	bool valid;
 };
 
 struct kvmppc_bat {
diff --git a/arch/powerpc/kvm/book3s_32_mmu.c b/arch/powerpc/kvm/book3s_32_mmu.c
index 1483a9b..7071e22 100644
--- a/arch/powerpc/kvm/book3s_32_mmu.c
+++ b/arch/powerpc/kvm/book3s_32_mmu.c
@@ -57,6 +57,8 @@ static inline bool check_debug_ip(struct kvm_vcpu *vcpu)
 
 static int kvmppc_mmu_book3s_32_xlate_bat(struct kvm_vcpu *vcpu, gva_t eaddr,
 					  struct kvmppc_pte *pte, bool data);
+static int kvmppc_mmu_book3s_32_esid_to_vsid(struct kvm_vcpu *vcpu, u64 esid,
+					     u64 *vsid);
 
 static struct kvmppc_sr *find_sr(struct kvmppc_vcpu_book3s *vcpu_book3s, gva_t eaddr)
 {
@@ -66,13 +68,14 @@ static struct kvmppc_sr *find_sr(struct kvmppc_vcpu_book3s *vcpu_book3s, gva_t e
 static u64 kvmppc_mmu_book3s_32_ea_to_vp(struct kvm_vcpu *vcpu, gva_t eaddr,
 					 bool data)
 {
-	struct kvmppc_sr *sre = find_sr(to_book3s(vcpu), eaddr);
+	u64 vsid;
 	struct kvmppc_pte pte;
 
 	if (!kvmppc_mmu_book3s_32_xlate_bat(vcpu, eaddr, &pte, data))
 		return pte.vpage;
 
-	return (((u64)eaddr >> 12) & 0xffff) | (((u64)sre->vsid) << 16);
+	kvmppc_mmu_book3s_32_esid_to_vsid(vcpu, eaddr >> SID_SHIFT, &vsid);
+	return (((u64)eaddr >> 12) & 0xffff) | (vsid << 16);
 }
 
 static void kvmppc_mmu_book3s_32_reset_msr(struct kvm_vcpu *vcpu)
@@ -142,8 +145,13 @@ static int kvmppc_mmu_book3s_32_xlate_bat(struct kvm_vcpu *vcpu, gva_t eaddr,
 				    bat->bepi_mask);
 		}
 		if ((eaddr & bat->bepi_mask) == bat->bepi) {
+			u64 vsid;
+			kvmppc_mmu_book3s_32_esid_to_vsid(vcpu,
+				eaddr >> SID_SHIFT, &vsid);
+			vsid <<= 16;
+			pte->vpage = (((u64)eaddr >> 12) & 0xffff) | vsid;
+
 			pte->raddr = bat->brpn | (eaddr & ~bat->bepi_mask);
-			pte->vpage = (eaddr >> 12) | VSID_BAT;
 			pte->may_read = bat->pp;
 			pte->may_write = bat->pp > 1;
 			pte->may_execute = true;
@@ -302,6 +310,7 @@ static void kvmppc_mmu_book3s_32_mtsrin(struct kvm_vcpu *vcpu, u32 srnum,
 	/* And then put in the new SR */
 	sre->raw = value;
 	sre->vsid = (value & 0x0fffffff);
+	sre->valid = (value & 0x80000000) ? false : true;
 	sre->Ks = (value & 0x40000000) ? true : false;
 	sre->Kp = (value & 0x20000000) ? true : false;
 	sre->nx = (value & 0x10000000) ? true : false;
@@ -312,7 +321,7 @@ static void kvmppc_mmu_book3s_32_mtsrin(struct kvm_vcpu *vcpu, u32 srnum,
 
 static void kvmppc_mmu_book3s_32_tlbie(struct kvm_vcpu *vcpu, ulong ea, bool large)
 {
-	kvmppc_mmu_pte_flush(vcpu, ea, ~0xFFFULL);
+	kvmppc_mmu_pte_flush(vcpu, ea, 0x0FFFF000);
 }
 
 static int kvmppc_mmu_book3s_32_esid_to_vsid(struct kvm_vcpu *vcpu, u64 esid,
@@ -333,15 +342,22 @@ static int kvmppc_mmu_book3s_32_esid_to_vsid(struct kvm_vcpu *vcpu, u64 esid,
 		break;
 	case MSR_DR|MSR_IR:
 	{
-		ulong ea;
-		ea = esid << SID_SHIFT;
-		*vsid = find_sr(to_book3s(vcpu), ea)->vsid;
+		ulong ea = esid << SID_SHIFT;
+		struct kvmppc_sr *sr = find_sr(to_book3s(vcpu), ea);
+
+		if (!sr->valid)
+			return -1;
+
+		*vsid = sr->vsid;
 		break;
 	}
 	default:
 		BUG();
 	}
 
+	if (vcpu->arch.msr & MSR_PR)
+		*vsid |= VSID_PR;
+
 	return 0;
 }
 
-- 
1.6.0.2

[PATCH 06/21] KVM: PPC: Don't reload FPU with invalid values

[Alexander Graf]

When the guest activates the FPU, we load it up. That's fine when
it wasn't activated before on the host, but if it was we end up
reloading FPU values from last time the FPU was deactivated on the
host without writing the proper values back to the vcpu struct.

This patch checks if the FPU is enabled already and if so just doesn't
bother activating it, making FPU operations survive guest context switches.

Signed-off-by: Alexander Graf <agraf@suse.de>
---
 arch/powerpc/kvm/book3s.c |    5 +++++
 1 files changed, 5 insertions(+), 0 deletions(-)

diff --git a/arch/powerpc/kvm/book3s.c b/arch/powerpc/kvm/book3s.c
index 400ae0a..029e1be 100644
--- a/arch/powerpc/kvm/book3s.c
+++ b/arch/powerpc/kvm/book3s.c
@@ -701,6 +701,11 @@ static int kvmppc_handle_ext(struct kvm_vcpu *vcpu, unsigned int exit_nr,
 		return RESUME_GUEST;
 	}
 
+	/* We already own the ext */
+	if (vcpu->arch.guest_owned_ext & msr) {
+		return RESUME_GUEST;
+	}
+
 #ifdef DEBUG_EXT
 	printk(KERN_INFO "Loading up ext 0x%lx\n", msr);
 #endif
-- 
1.6.0.2

[PATCH 06/21] KVM: PPC: Don't reload FPU with invalid values

[Alexander Graf]

When the guest activates the FPU, we load it up. That's fine when
it wasn't activated before on the host, but if it was we end up
reloading FPU values from last time the FPU was deactivated on the
host without writing the proper values back to the vcpu struct.

This patch checks if the FPU is enabled already and if so just doesn't
bother activating it, making FPU operations survive guest context switches.

Signed-off-by: Alexander Graf <agraf-l3A5Bk7waGM@public.gmane.org>
---
 arch/powerpc/kvm/book3s.c |    5 +++++
 1 files changed, 5 insertions(+), 0 deletions(-)

diff --git a/arch/powerpc/kvm/book3s.c b/arch/powerpc/kvm/book3s.c
index 400ae0a..029e1be 100644
--- a/arch/powerpc/kvm/book3s.c
+++ b/arch/powerpc/kvm/book3s.c
@@ -701,6 +701,11 @@ static int kvmppc_handle_ext(struct kvm_vcpu *vcpu, unsigned int exit_nr,
 		return RESUME_GUEST;
 	}
 
+	/* We already own the ext */
+	if (vcpu->arch.guest_owned_ext & msr) {
+		return RESUME_GUEST;
+	}
+
 #ifdef DEBUG_EXT
 	printk(KERN_INFO "Loading up ext 0x%lx\n", msr);
 #endif
-- 
1.6.0.2

[PATCH 07/21] KVM: PPC: Load VCPU for register fetching

[Alexander Graf]

When trying to read or store vcpu register data, we should also make
sure the vcpu is actually loaded, so we're 100% sure we get the correct
values.

Signed-off-by: Alexander Graf <agraf@suse.de>
---
 arch/powerpc/kvm/book3s.c |    8 ++++++++
 1 files changed, 8 insertions(+), 0 deletions(-)

diff --git a/arch/powerpc/kvm/book3s.c b/arch/powerpc/kvm/book3s.c
index 029e1be..585dc91 100644
--- a/arch/powerpc/kvm/book3s.c
+++ b/arch/powerpc/kvm/book3s.c
@@ -955,6 +955,8 @@ int kvm_arch_vcpu_ioctl_get_regs(struct kvm_vcpu *vcpu, struct kvm_regs *regs)
 {
 	int i;
 
+	vcpu_load(vcpu);
+
 	regs->pc = vcpu->arch.pc;
 	regs->cr = kvmppc_get_cr(vcpu);
 	regs->ctr = vcpu->arch.ctr;
@@ -975,6 +977,8 @@ int kvm_arch_vcpu_ioctl_get_regs(struct kvm_vcpu *vcpu, struct kvm_regs *regs)
 	for (i = 0; i < ARRAY_SIZE(regs->gpr); i++)
 		regs->gpr[i] = kvmppc_get_gpr(vcpu, i);
 
+	vcpu_put(vcpu);
+
 	return 0;
 }
 
@@ -982,6 +986,8 @@ int kvm_arch_vcpu_ioctl_set_regs(struct kvm_vcpu *vcpu, struct kvm_regs *regs)
 {
 	int i;
 
+	vcpu_load(vcpu);
+
 	vcpu->arch.pc = regs->pc;
 	kvmppc_set_cr(vcpu, regs->cr);
 	vcpu->arch.ctr = regs->ctr;
@@ -1001,6 +1007,8 @@ int kvm_arch_vcpu_ioctl_set_regs(struct kvm_vcpu *vcpu, struct kvm_regs *regs)
 	for (i = 0; i < ARRAY_SIZE(regs->gpr); i++)
 		kvmppc_set_gpr(vcpu, i, regs->gpr[i]);
 
+	vcpu_put(vcpu);
+
 	return 0;
 }
 
-- 
1.6.0.2

[PATCH 07/21] KVM: PPC: Load VCPU for register fetching

[Alexander Graf]

When trying to read or store vcpu register data, we should also make
sure the vcpu is actually loaded, so we're 100% sure we get the correct
values.

Signed-off-by: Alexander Graf <agraf-l3A5Bk7waGM@public.gmane.org>
---
 arch/powerpc/kvm/book3s.c |    8 ++++++++
 1 files changed, 8 insertions(+), 0 deletions(-)

diff --git a/arch/powerpc/kvm/book3s.c b/arch/powerpc/kvm/book3s.c
index 029e1be..585dc91 100644
--- a/arch/powerpc/kvm/book3s.c
+++ b/arch/powerpc/kvm/book3s.c
@@ -955,6 +955,8 @@ int kvm_arch_vcpu_ioctl_get_regs(struct kvm_vcpu *vcpu, struct kvm_regs *regs)
 {
 	int i;
 
+	vcpu_load(vcpu);
+
 	regs->pc = vcpu->arch.pc;
 	regs->cr = kvmppc_get_cr(vcpu);
 	regs->ctr = vcpu->arch.ctr;
@@ -975,6 +977,8 @@ int kvm_arch_vcpu_ioctl_get_regs(struct kvm_vcpu *vcpu, struct kvm_regs *regs)
 	for (i = 0; i < ARRAY_SIZE(regs->gpr); i++)
 		regs->gpr[i] = kvmppc_get_gpr(vcpu, i);
 
+	vcpu_put(vcpu);
+
 	return 0;
 }
 
@@ -982,6 +986,8 @@ int kvm_arch_vcpu_ioctl_set_regs(struct kvm_vcpu *vcpu, struct kvm_regs *regs)
 {
 	int i;
 
+	vcpu_load(vcpu);
+
 	vcpu->arch.pc = regs->pc;
 	kvmppc_set_cr(vcpu, regs->cr);
 	vcpu->arch.ctr = regs->ctr;
@@ -1001,6 +1007,8 @@ int kvm_arch_vcpu_ioctl_set_regs(struct kvm_vcpu *vcpu, struct kvm_regs *regs)
 	for (i = 0; i < ARRAY_SIZE(regs->gpr); i++)
 		kvmppc_set_gpr(vcpu, i, regs->gpr[i]);
 
+	vcpu_put(vcpu);
+
 	return 0;
 }
 
-- 
1.6.0.2

[PATCH 08/21] KVM: PPC: Implement mfsr emulation

[Alexander Graf]

We emulate the mfsrin instruction already, that passes the SR number
in a register value. But we lacked support for mfsr that encoded the
SR number in the opcode.

So let's implement it.

Signed-off-by: Alexander Graf <agraf@suse.de>
---
 arch/powerpc/kvm/book3s_64_emulate.c |   13 +++++++++++++
 1 files changed, 13 insertions(+), 0 deletions(-)

diff --git a/arch/powerpc/kvm/book3s_64_emulate.c b/arch/powerpc/kvm/book3s_64_emulate.c
index c989214..8d7a78d 100644
--- a/arch/powerpc/kvm/book3s_64_emulate.c
+++ b/arch/powerpc/kvm/book3s_64_emulate.c
@@ -35,6 +35,7 @@
 #define OP_31_XOP_SLBMTE	402
 #define OP_31_XOP_SLBIE		434
 #define OP_31_XOP_SLBIA		498
+#define OP_31_XOP_MFSR		595
 #define OP_31_XOP_MFSRIN	659
 #define OP_31_XOP_SLBMFEV	851
 #define OP_31_XOP_EIOIO		854
@@ -90,6 +91,18 @@ int kvmppc_core_emulate_op(struct kvm_run *run, struct kvm_vcpu *vcpu,
 		case OP_31_XOP_MTMSR:
 			kvmppc_set_msr(vcpu, kvmppc_get_gpr(vcpu, get_rs(inst)));
 			break;
+		case OP_31_XOP_MFSR:
+		{
+			int srnum;
+
+			srnum = kvmppc_get_field(inst, 12 + 32, 15 + 32);
+			if (vcpu->arch.mmu.mfsrin) {
+				u32 sr;
+				sr = vcpu->arch.mmu.mfsrin(vcpu, srnum);
+				kvmppc_set_gpr(vcpu, get_rt(inst), sr);
+			}
+			break;
+		}
 		case OP_31_XOP_MFSRIN:
 		{
 			int srnum;
-- 
1.6.0.2

[PATCH 08/21] KVM: PPC: Implement mfsr emulation

[Alexander Graf]

We emulate the mfsrin instruction already, that passes the SR number
in a register value. But we lacked support for mfsr that encoded the
SR number in the opcode.

So let's implement it.

Signed-off-by: Alexander Graf <agraf-l3A5Bk7waGM@public.gmane.org>
---
 arch/powerpc/kvm/book3s_64_emulate.c |   13 +++++++++++++
 1 files changed, 13 insertions(+), 0 deletions(-)

diff --git a/arch/powerpc/kvm/book3s_64_emulate.c b/arch/powerpc/kvm/book3s_64_emulate.c
index c989214..8d7a78d 100644
--- a/arch/powerpc/kvm/book3s_64_emulate.c
+++ b/arch/powerpc/kvm/book3s_64_emulate.c
@@ -35,6 +35,7 @@
 #define OP_31_XOP_SLBMTE	402
 #define OP_31_XOP_SLBIE		434
 #define OP_31_XOP_SLBIA		498
+#define OP_31_XOP_MFSR		595
 #define OP_31_XOP_MFSRIN	659
 #define OP_31_XOP_SLBMFEV	851
 #define OP_31_XOP_EIOIO		854
@@ -90,6 +91,18 @@ int kvmppc_core_emulate_op(struct kvm_run *run, struct kvm_vcpu *vcpu,
 		case OP_31_XOP_MTMSR:
 			kvmppc_set_msr(vcpu, kvmppc_get_gpr(vcpu, get_rs(inst)));
 			break;
+		case OP_31_XOP_MFSR:
+		{
+			int srnum;
+
+			srnum = kvmppc_get_field(inst, 12 + 32, 15 + 32);
+			if (vcpu->arch.mmu.mfsrin) {
+				u32 sr;
+				sr = vcpu->arch.mmu.mfsrin(vcpu, srnum);
+				kvmppc_set_gpr(vcpu, get_rt(inst), sr);
+			}
+			break;
+		}
 		case OP_31_XOP_MFSRIN:
 		{
 			int srnum;
-- 
1.6.0.2

[PATCH 09/21] KVM: PPC: Implement BAT reads

[Alexander Graf]

BATs can't only be written to, you can also read them out!
So let's implement emulation for reading BAT values again.

While at it, I also made BAT setting flush the segment cache,
so we're absolutely sure there's no MMU state left when writing
BATs.

Signed-off-by: Alexander Graf <agraf@suse.de>
---
 arch/powerpc/kvm/book3s_64_emulate.c |   35 ++++++++++++++++++++++++++++++++++
 1 files changed, 35 insertions(+), 0 deletions(-)

diff --git a/arch/powerpc/kvm/book3s_64_emulate.c b/arch/powerpc/kvm/book3s_64_emulate.c
index 8d7a78d..39d5003 100644
--- a/arch/powerpc/kvm/book3s_64_emulate.c
+++ b/arch/powerpc/kvm/book3s_64_emulate.c
@@ -239,6 +239,34 @@ void kvmppc_set_bat(struct kvm_vcpu *vcpu, struct kvmppc_bat *bat, bool upper,
 	}
 }
 
+static u32 kvmppc_read_bat(struct kvm_vcpu *vcpu, int sprn)
+{
+	struct kvmppc_vcpu_book3s *vcpu_book3s = to_book3s(vcpu);
+	struct kvmppc_bat *bat;
+
+	switch (sprn) {
+	case SPRN_IBAT0U ... SPRN_IBAT3L:
+		bat = &vcpu_book3s->ibat[(sprn - SPRN_IBAT0U) / 2];
+		break;
+	case SPRN_IBAT4U ... SPRN_IBAT7L:
+		bat = &vcpu_book3s->ibat[4 + ((sprn - SPRN_IBAT4U) / 2)];
+		break;
+	case SPRN_DBAT0U ... SPRN_DBAT3L:
+		bat = &vcpu_book3s->dbat[(sprn - SPRN_DBAT0U) / 2];
+		break;
+	case SPRN_DBAT4U ... SPRN_DBAT7L:
+		bat = &vcpu_book3s->dbat[4 + ((sprn - SPRN_DBAT4U) / 2)];
+		break;
+	default:
+		BUG();
+	}
+
+	if (sprn % 2)
+		return bat->raw >> 32;
+	else
+		return bat->raw;
+}
+
 static void kvmppc_write_bat(struct kvm_vcpu *vcpu, int sprn, u32 val)
 {
 	struct kvmppc_vcpu_book3s *vcpu_book3s = to_book3s(vcpu);
@@ -290,6 +318,7 @@ int kvmppc_core_emulate_mtspr(struct kvm_vcpu *vcpu, int sprn, int rs)
 		/* BAT writes happen so rarely that we're ok to flush
 		 * everything here */
 		kvmppc_mmu_pte_flush(vcpu, 0, 0);
+		kvmppc_mmu_flush_segments(vcpu);
 		break;
 	case SPRN_HID0:
 		to_book3s(vcpu)->hid[0] = spr_val;
@@ -373,6 +402,12 @@ int kvmppc_core_emulate_mfspr(struct kvm_vcpu *vcpu, int sprn, int rt)
 	int emulated = EMULATE_DONE;
 
 	switch (sprn) {
+	case SPRN_IBAT0U ... SPRN_IBAT3L:
+	case SPRN_IBAT4U ... SPRN_IBAT7L:
+	case SPRN_DBAT0U ... SPRN_DBAT3L:
+	case SPRN_DBAT4U ... SPRN_DBAT7L:
+		kvmppc_set_gpr(vcpu, rt, kvmppc_read_bat(vcpu, sprn));
+		break;
 	case SPRN_SDR1:
 		kvmppc_set_gpr(vcpu, rt, to_book3s(vcpu)->sdr1);
 		break;
-- 
1.6.0.2

[PATCH 09/21] KVM: PPC: Implement BAT reads

[Alexander Graf]

BATs can't only be written to, you can also read them out!
So let's implement emulation for reading BAT values again.

While at it, I also made BAT setting flush the segment cache,
so we're absolutely sure there's no MMU state left when writing
BATs.

Signed-off-by: Alexander Graf <agraf-l3A5Bk7waGM@public.gmane.org>
---
 arch/powerpc/kvm/book3s_64_emulate.c |   35 ++++++++++++++++++++++++++++++++++
 1 files changed, 35 insertions(+), 0 deletions(-)

diff --git a/arch/powerpc/kvm/book3s_64_emulate.c b/arch/powerpc/kvm/book3s_64_emulate.c
index 8d7a78d..39d5003 100644
--- a/arch/powerpc/kvm/book3s_64_emulate.c
+++ b/arch/powerpc/kvm/book3s_64_emulate.c
@@ -239,6 +239,34 @@ void kvmppc_set_bat(struct kvm_vcpu *vcpu, struct kvmppc_bat *bat, bool upper,
 	}
 }
 
+static u32 kvmppc_read_bat(struct kvm_vcpu *vcpu, int sprn)
+{
+	struct kvmppc_vcpu_book3s *vcpu_book3s = to_book3s(vcpu);
+	struct kvmppc_bat *bat;
+
+	switch (sprn) {
+	case SPRN_IBAT0U ... SPRN_IBAT3L:
+		bat = &vcpu_book3s->ibat[(sprn - SPRN_IBAT0U) / 2];
+		break;
+	case SPRN_IBAT4U ... SPRN_IBAT7L:
+		bat = &vcpu_book3s->ibat[4 + ((sprn - SPRN_IBAT4U) / 2)];
+		break;
+	case SPRN_DBAT0U ... SPRN_DBAT3L:
+		bat = &vcpu_book3s->dbat[(sprn - SPRN_DBAT0U) / 2];
+		break;
+	case SPRN_DBAT4U ... SPRN_DBAT7L:
+		bat = &vcpu_book3s->dbat[4 + ((sprn - SPRN_DBAT4U) / 2)];
+		break;
+	default:
+		BUG();
+	}
+
+	if (sprn % 2)
+		return bat->raw >> 32;
+	else
+		return bat->raw;
+}
+
 static void kvmppc_write_bat(struct kvm_vcpu *vcpu, int sprn, u32 val)
 {
 	struct kvmppc_vcpu_book3s *vcpu_book3s = to_book3s(vcpu);
@@ -290,6 +318,7 @@ int kvmppc_core_emulate_mtspr(struct kvm_vcpu *vcpu, int sprn, int rs)
 		/* BAT writes happen so rarely that we're ok to flush
 		 * everything here */
 		kvmppc_mmu_pte_flush(vcpu, 0, 0);
+		kvmppc_mmu_flush_segments(vcpu);
 		break;
 	case SPRN_HID0:
 		to_book3s(vcpu)->hid[0] = spr_val;
@@ -373,6 +402,12 @@ int kvmppc_core_emulate_mfspr(struct kvm_vcpu *vcpu, int sprn, int rt)
 	int emulated = EMULATE_DONE;
 
 	switch (sprn) {
+	case SPRN_IBAT0U ... SPRN_IBAT3L:
+	case SPRN_IBAT4U ... SPRN_IBAT7L:
+	case SPRN_DBAT0U ... SPRN_DBAT3L:
+	case SPRN_DBAT4U ... SPRN_DBAT7L:
+		kvmppc_set_gpr(vcpu, rt, kvmppc_read_bat(vcpu, sprn));
+		break;
 	case SPRN_SDR1:
 		kvmppc_set_gpr(vcpu, rt, to_book3s(vcpu)->sdr1);
 		break;
-- 
1.6.0.2

[PATCH 11/21] KVM: PPC: Implement emulation for lbzux and lhax

[Alexander Graf]

We get MMIOs with the weirdest instructions. But every time we do,
we need to improve our emulator to implement them.

So let's do that - this time it's lbzux and lhax's round.

Signed-off-by: Alexander Graf <agraf@suse.de>
---
 arch/powerpc/kvm/emulate.c |   20 ++++++++++++++++++++
 1 files changed, 20 insertions(+), 0 deletions(-)

diff --git a/arch/powerpc/kvm/emulate.c b/arch/powerpc/kvm/emulate.c
index 2410ec2..dbb5d68 100644
--- a/arch/powerpc/kvm/emulate.c
+++ b/arch/powerpc/kvm/emulate.c
@@ -38,10 +38,12 @@
 #define OP_31_XOP_LBZX      87
 #define OP_31_XOP_STWX      151
 #define OP_31_XOP_STBX      215
+#define OP_31_XOP_LBZUX     119
 #define OP_31_XOP_STBUX     247
 #define OP_31_XOP_LHZX      279
 #define OP_31_XOP_LHZUX     311
 #define OP_31_XOP_MFSPR     339
+#define OP_31_XOP_LHAX      343
 #define OP_31_XOP_STHX      407
 #define OP_31_XOP_STHUX     439
 #define OP_31_XOP_MTSPR     467
@@ -173,6 +175,19 @@ int kvmppc_emulate_instruction(struct kvm_run *run, struct kvm_vcpu *vcpu)
 			emulated = kvmppc_handle_load(run, vcpu, rt, 1, 1);
 			break;
 
+		case OP_31_XOP_LBZUX:
+			rt = get_rt(inst);
+			ra = get_ra(inst);
+			rb = get_rb(inst);
+
+			ea = kvmppc_get_gpr(vcpu, rb);
+			if (ra)
+				ea += kvmppc_get_gpr(vcpu, ra);
+
+			emulated = kvmppc_handle_load(run, vcpu, rt, 1, 1);
+			kvmppc_set_gpr(vcpu, ra, ea);
+			break;
+
 		case OP_31_XOP_STWX:
 			rs = get_rs(inst);
 			emulated = kvmppc_handle_store(run, vcpu,
@@ -202,6 +217,11 @@ int kvmppc_emulate_instruction(struct kvm_run *run, struct kvm_vcpu *vcpu)
 			kvmppc_set_gpr(vcpu, rs, ea);
 			break;
 
+		case OP_31_XOP_LHAX:
+			rt = get_rt(inst);
+			emulated = kvmppc_handle_loads(run, vcpu, rt, 2, 1);
+			break;
+
 		case OP_31_XOP_LHZX:
 			rt = get_rt(inst);
 			emulated = kvmppc_handle_load(run, vcpu, rt, 2, 1);
-- 
1.6.0.2

[PATCH 11/21] KVM: PPC: Implement emulation for lbzux and lhax

[Alexander Graf]

We get MMIOs with the weirdest instructions. But every time we do,
we need to improve our emulator to implement them.

So let's do that - this time it's lbzux and lhax's round.

Signed-off-by: Alexander Graf <agraf-l3A5Bk7waGM@public.gmane.org>
---
 arch/powerpc/kvm/emulate.c |   20 ++++++++++++++++++++
 1 files changed, 20 insertions(+), 0 deletions(-)

diff --git a/arch/powerpc/kvm/emulate.c b/arch/powerpc/kvm/emulate.c
index 2410ec2..dbb5d68 100644
--- a/arch/powerpc/kvm/emulate.c
+++ b/arch/powerpc/kvm/emulate.c
@@ -38,10 +38,12 @@
 #define OP_31_XOP_LBZX      87
 #define OP_31_XOP_STWX      151
 #define OP_31_XOP_STBX      215
+#define OP_31_XOP_LBZUX     119
 #define OP_31_XOP_STBUX     247
 #define OP_31_XOP_LHZX      279
 #define OP_31_XOP_LHZUX     311
 #define OP_31_XOP_MFSPR     339
+#define OP_31_XOP_LHAX      343
 #define OP_31_XOP_STHX      407
 #define OP_31_XOP_STHUX     439
 #define OP_31_XOP_MTSPR     467
@@ -173,6 +175,19 @@ int kvmppc_emulate_instruction(struct kvm_run *run, struct kvm_vcpu *vcpu)
 			emulated = kvmppc_handle_load(run, vcpu, rt, 1, 1);
 			break;
 
+		case OP_31_XOP_LBZUX:
+			rt = get_rt(inst);
+			ra = get_ra(inst);
+			rb = get_rb(inst);
+
+			ea = kvmppc_get_gpr(vcpu, rb);
+			if (ra)
+				ea += kvmppc_get_gpr(vcpu, ra);
+
+			emulated = kvmppc_handle_load(run, vcpu, rt, 1, 1);
+			kvmppc_set_gpr(vcpu, ra, ea);
+			break;
+
 		case OP_31_XOP_STWX:
 			rs = get_rs(inst);
 			emulated = kvmppc_handle_store(run, vcpu,
@@ -202,6 +217,11 @@ int kvmppc_emulate_instruction(struct kvm_run *run, struct kvm_vcpu *vcpu)
 			kvmppc_set_gpr(vcpu, rs, ea);
 			break;
 
+		case OP_31_XOP_LHAX:
+			rt = get_rt(inst);
+			emulated = kvmppc_handle_loads(run, vcpu, rt, 2, 1);
+			break;
+
 		case OP_31_XOP_LHZX:
 			rt = get_rt(inst);
 			emulated = kvmppc_handle_load(run, vcpu, rt, 2, 1);
-- 
1.6.0.2

[PATCH 14/21] KVM: PPC: Add OSI hypercall interface

[Alexander Graf]

MOL uses its own hypercall interface to call back into userspace when
the guest wants to do something.

So let's implement that as an exit reason, specify it with a CAP and
only really use it when userspace wants us to.

The only user of it so far is MOL.

Signed-off-by: Alexander Graf <agraf@suse.de>

---

v1 -> v2:

  - Add documentation for OSI exit struct

v2 -> v3:

  - Document that EXIT_OSI is not migration safe
---
 Documentation/kvm/api.txt             |   19 ++++++++++++++++---
 arch/powerpc/include/asm/kvm_book3s.h |    5 +++++
 arch/powerpc/include/asm/kvm_host.h   |    2 ++
 arch/powerpc/kvm/book3s.c             |   24 ++++++++++++++++++------
 arch/powerpc/kvm/powerpc.c            |   12 ++++++++++++
 include/linux/kvm.h                   |    6 ++++++
 6 files changed, 59 insertions(+), 9 deletions(-)

diff --git a/Documentation/kvm/api.txt b/Documentation/kvm/api.txt
index 3da2240..f0a9337 100644
--- a/Documentation/kvm/api.txt
+++ b/Documentation/kvm/api.txt
@@ -895,9 +895,9 @@ executed a memory-mapped I/O instruction which could not be satisfied
 by kvm.  The 'data' member contains the written data if 'is_write' is
 true, and should be filled by application code otherwise.
 
-NOTE: For KVM_EXIT_IO and KVM_EXIT_MMIO, the corresponding operations
-are complete (and guest state is consistent) only after userspace has
-re-entered the kernel with KVM_RUN.  The kernel side will first finish
+NOTE: For KVM_EXIT_IO, KVM_EXIT_MMIO and KVM_EXIT_OSI, the corresponding
+operations are complete (and guest state is consistent) only after userspace
+has re-entered the kernel with KVM_RUN.  The kernel side will first finish
 incomplete operations and then check for pending signals.  Userspace
 can re-enter the guest with an unmasked signal pending to complete
 pending operations.
@@ -952,6 +952,19 @@ s390 specific.
 
 powerpc specific.
 
+		/* KVM_EXIT_OSI */
+		struct {
+			__u64 gprs[32];
+		} osi;
+
+MOL uses a special hypercall interface it calls 'OSI'. To enable it, we catch
+hypercalls and exit with this exit struct that contains all the guest gprs.
+
+If exit_reason is KVM_EXIT_OSI, then the vcpu has triggered such a hypercall.
+Userspace can now handle the hypercall and when it's done modify the gprs as
+necessary. Upon guest entry all guest GPRs will then be replaced by the values
+in this struct.
+
 		/* Fix the size of the union. */
 		char padding[256];
 	};
diff --git a/arch/powerpc/include/asm/kvm_book3s.h b/arch/powerpc/include/asm/kvm_book3s.h
index bea7637..7e243b2 100644
--- a/arch/powerpc/include/asm/kvm_book3s.h
+++ b/arch/powerpc/include/asm/kvm_book3s.h
@@ -148,6 +148,11 @@ static inline ulong dsisr(void)
 
 extern void kvm_return_point(void);
 
+/* Magic register values loaded into r3 and r4 before the 'sc' assembly
+ * instruction for the OSI hypercalls */
+#define OSI_SC_MAGIC_R3			0x113724FA
+#define OSI_SC_MAGIC_R4			0x77810F9B
+
 #define INS_DCBZ			0x7c0007ec
 
 #endif /* __ASM_KVM_BOOK3S_H__ */
diff --git a/arch/powerpc/include/asm/kvm_host.h b/arch/powerpc/include/asm/kvm_host.h
index 0ebda67..486f1ca 100644
--- a/arch/powerpc/include/asm/kvm_host.h
+++ b/arch/powerpc/include/asm/kvm_host.h
@@ -273,6 +273,8 @@ struct kvm_vcpu_arch {
 	u8 mmio_sign_extend;
 	u8 dcr_needed;
 	u8 dcr_is_write;
+	u8 osi_needed;
+	u8 osi_enabled;
 
 	u32 cpr0_cfgaddr; /* holds the last set cpr0_cfgaddr */
 
diff --git a/arch/powerpc/kvm/book3s.c b/arch/powerpc/kvm/book3s.c
index 130a9a1..d6105d9 100644
--- a/arch/powerpc/kvm/book3s.c
+++ b/arch/powerpc/kvm/book3s.c
@@ -871,12 +871,24 @@ program_interrupt:
 		break;
 	}
 	case BOOK3S_INTERRUPT_SYSCALL:
-#ifdef EXIT_DEBUG
-		printk(KERN_INFO "Syscall Nr %d\n", (int)kvmppc_get_gpr(vcpu, 0));
-#endif
-		vcpu->stat.syscall_exits++;
-		kvmppc_book3s_queue_irqprio(vcpu, exit_nr);
-		r = RESUME_GUEST;
+		// XXX make user settable
+		if (vcpu->arch.osi_enabled &&
+		    (((u32)kvmppc_get_gpr(vcpu, 3)) = OSI_SC_MAGIC_R3) &&
+		    (((u32)kvmppc_get_gpr(vcpu, 4)) = OSI_SC_MAGIC_R4)) {
+			u64 *gprs = run->osi.gprs;
+			int i;
+
+			run->exit_reason = KVM_EXIT_OSI;
+			for (i = 0; i < 32; i++)
+				gprs[i] = kvmppc_get_gpr(vcpu, i);
+			vcpu->arch.osi_needed = 1;
+			r = RESUME_HOST_NV;
+
+		} else {
+			vcpu->stat.syscall_exits++;
+			kvmppc_book3s_queue_irqprio(vcpu, exit_nr);
+			r = RESUME_GUEST;
+		}
 		break;
 	case BOOK3S_INTERRUPT_FP_UNAVAIL:
 	case BOOK3S_INTERRUPT_ALTIVEC:
diff --git a/arch/powerpc/kvm/powerpc.c b/arch/powerpc/kvm/powerpc.c
index 2092157..e6142c7 100644
--- a/arch/powerpc/kvm/powerpc.c
+++ b/arch/powerpc/kvm/powerpc.c
@@ -150,6 +150,7 @@ int kvm_dev_ioctl_check_extension(long ext)
 	case KVM_CAP_PPC_PAIRED_SINGLES:
 	case KVM_CAP_PPC_UNSET_IRQ:
 	case KVM_CAP_ENABLE_CAP:
+	case KVM_CAP_PPC_OSI:
 		r = 1;
 		break;
 	case KVM_CAP_COALESCED_MMIO:
@@ -432,6 +433,13 @@ int kvm_arch_vcpu_ioctl_run(struct kvm_vcpu *vcpu, struct kvm_run *run)
 		if (!vcpu->arch.dcr_is_write)
 			kvmppc_complete_dcr_load(vcpu, run);
 		vcpu->arch.dcr_needed = 0;
+	} else if (vcpu->arch.osi_needed) {
+		u64 *gprs = run->osi.gprs;
+		int i;
+
+		for (i = 0; i < 32; i++)
+			kvmppc_set_gpr(vcpu, i, gprs[i]);
+		vcpu->arch.osi_needed = 0;
 	}
 
 	kvmppc_core_deliver_interrupts(vcpu);
@@ -474,6 +482,10 @@ static int kvm_vcpu_ioctl_enable_cap(struct kvm_vcpu *vcpu,
 		return -EINVAL;
 
 	switch (cap->cap) {
+	case KVM_CAP_PPC_OSI:
+		r = 0;
+		vcpu->arch.osi_enabled = true;
+		break;
 	default:
 		r = -EINVAL;
 		break;
diff --git a/include/linux/kvm.h b/include/linux/kvm.h
index d9e920e..16ab618 100644
--- a/include/linux/kvm.h
+++ b/include/linux/kvm.h
@@ -160,6 +160,7 @@ struct kvm_pit_config {
 #define KVM_EXIT_DCR              15
 #define KVM_EXIT_NMI              16
 #define KVM_EXIT_INTERNAL_ERROR   17
+#define KVM_EXIT_OSI              18
 
 /* For KVM_EXIT_INTERNAL_ERROR */
 #define KVM_INTERNAL_ERROR_EMULATION 1
@@ -259,6 +260,10 @@ struct kvm_run {
 			__u32 ndata;
 			__u64 data[16];
 		} internal;
+		/* KVM_EXIT_OSI */
+		struct {
+			__u64 gprs[32];
+		} osi;
 		/* Fix the size of the union. */
 		char padding[256];
 	};
@@ -516,6 +521,7 @@ struct kvm_enable_cap {
 #define KVM_CAP_DEBUGREGS 50
 #endif
 #define KVM_CAP_X86_ROBUST_SINGLESTEP 51
+#define KVM_CAP_PPC_OSI 52
 #define KVM_CAP_PPC_UNSET_IRQ 53
 #define KVM_CAP_ENABLE_CAP 54
 
-- 
1.6.0.2

[PATCH 14/21] KVM: PPC: Add OSI hypercall interface

[Alexander Graf]

MOL uses its own hypercall interface to call back into userspace when
the guest wants to do something.

So let's implement that as an exit reason, specify it with a CAP and
only really use it when userspace wants us to.

The only user of it so far is MOL.

Signed-off-by: Alexander Graf <agraf-l3A5Bk7waGM@public.gmane.org>

---

v1 -> v2:

  - Add documentation for OSI exit struct

v2 -> v3:

  - Document that EXIT_OSI is not migration safe
---
 Documentation/kvm/api.txt             |   19 ++++++++++++++++---
 arch/powerpc/include/asm/kvm_book3s.h |    5 +++++
 arch/powerpc/include/asm/kvm_host.h   |    2 ++
 arch/powerpc/kvm/book3s.c             |   24 ++++++++++++++++++------
 arch/powerpc/kvm/powerpc.c            |   12 ++++++++++++
 include/linux/kvm.h                   |    6 ++++++
 6 files changed, 59 insertions(+), 9 deletions(-)

diff --git a/Documentation/kvm/api.txt b/Documentation/kvm/api.txt
index 3da2240..f0a9337 100644
--- a/Documentation/kvm/api.txt
+++ b/Documentation/kvm/api.txt
@@ -895,9 +895,9 @@ executed a memory-mapped I/O instruction which could not be satisfied
 by kvm.  The 'data' member contains the written data if 'is_write' is
 true, and should be filled by application code otherwise.
 
-NOTE: For KVM_EXIT_IO and KVM_EXIT_MMIO, the corresponding operations
-are complete (and guest state is consistent) only after userspace has
-re-entered the kernel with KVM_RUN.  The kernel side will first finish
+NOTE: For KVM_EXIT_IO, KVM_EXIT_MMIO and KVM_EXIT_OSI, the corresponding
+operations are complete (and guest state is consistent) only after userspace
+has re-entered the kernel with KVM_RUN.  The kernel side will first finish
 incomplete operations and then check for pending signals.  Userspace
 can re-enter the guest with an unmasked signal pending to complete
 pending operations.
@@ -952,6 +952,19 @@ s390 specific.
 
 powerpc specific.
 
+		/* KVM_EXIT_OSI */
+		struct {
+			__u64 gprs[32];
+		} osi;
+
+MOL uses a special hypercall interface it calls 'OSI'. To enable it, we catch
+hypercalls and exit with this exit struct that contains all the guest gprs.
+
+If exit_reason is KVM_EXIT_OSI, then the vcpu has triggered such a hypercall.
+Userspace can now handle the hypercall and when it's done modify the gprs as
+necessary. Upon guest entry all guest GPRs will then be replaced by the values
+in this struct.
+
 		/* Fix the size of the union. */
 		char padding[256];
 	};
diff --git a/arch/powerpc/include/asm/kvm_book3s.h b/arch/powerpc/include/asm/kvm_book3s.h
index bea7637..7e243b2 100644
--- a/arch/powerpc/include/asm/kvm_book3s.h
+++ b/arch/powerpc/include/asm/kvm_book3s.h
@@ -148,6 +148,11 @@ static inline ulong dsisr(void)
 
 extern void kvm_return_point(void);
 
+/* Magic register values loaded into r3 and r4 before the 'sc' assembly
+ * instruction for the OSI hypercalls */
+#define OSI_SC_MAGIC_R3			0x113724FA
+#define OSI_SC_MAGIC_R4			0x77810F9B
+
 #define INS_DCBZ			0x7c0007ec
 
 #endif /* __ASM_KVM_BOOK3S_H__ */
diff --git a/arch/powerpc/include/asm/kvm_host.h b/arch/powerpc/include/asm/kvm_host.h
index 0ebda67..486f1ca 100644
--- a/arch/powerpc/include/asm/kvm_host.h
+++ b/arch/powerpc/include/asm/kvm_host.h
@@ -273,6 +273,8 @@ struct kvm_vcpu_arch {
 	u8 mmio_sign_extend;
 	u8 dcr_needed;
 	u8 dcr_is_write;
+	u8 osi_needed;
+	u8 osi_enabled;
 
 	u32 cpr0_cfgaddr; /* holds the last set cpr0_cfgaddr */
 
diff --git a/arch/powerpc/kvm/book3s.c b/arch/powerpc/kvm/book3s.c
index 130a9a1..d6105d9 100644
--- a/arch/powerpc/kvm/book3s.c
+++ b/arch/powerpc/kvm/book3s.c
@@ -871,12 +871,24 @@ program_interrupt:
 		break;
 	}
 	case BOOK3S_INTERRUPT_SYSCALL:
-#ifdef EXIT_DEBUG
-		printk(KERN_INFO "Syscall Nr %d\n", (int)kvmppc_get_gpr(vcpu, 0));
-#endif
-		vcpu->stat.syscall_exits++;
-		kvmppc_book3s_queue_irqprio(vcpu, exit_nr);
-		r = RESUME_GUEST;
+		// XXX make user settable
+		if (vcpu->arch.osi_enabled &&
+		    (((u32)kvmppc_get_gpr(vcpu, 3)) == OSI_SC_MAGIC_R3) &&
+		    (((u32)kvmppc_get_gpr(vcpu, 4)) == OSI_SC_MAGIC_R4)) {
+			u64 *gprs = run->osi.gprs;
+			int i;
+
+			run->exit_reason = KVM_EXIT_OSI;
+			for (i = 0; i < 32; i++)
+				gprs[i] = kvmppc_get_gpr(vcpu, i);
+			vcpu->arch.osi_needed = 1;
+			r = RESUME_HOST_NV;
+
+		} else {
+			vcpu->stat.syscall_exits++;
+			kvmppc_book3s_queue_irqprio(vcpu, exit_nr);
+			r = RESUME_GUEST;
+		}
 		break;
 	case BOOK3S_INTERRUPT_FP_UNAVAIL:
 	case BOOK3S_INTERRUPT_ALTIVEC:
diff --git a/arch/powerpc/kvm/powerpc.c b/arch/powerpc/kvm/powerpc.c
index 2092157..e6142c7 100644
--- a/arch/powerpc/kvm/powerpc.c
+++ b/arch/powerpc/kvm/powerpc.c
@@ -150,6 +150,7 @@ int kvm_dev_ioctl_check_extension(long ext)
 	case KVM_CAP_PPC_PAIRED_SINGLES:
 	case KVM_CAP_PPC_UNSET_IRQ:
 	case KVM_CAP_ENABLE_CAP:
+	case KVM_CAP_PPC_OSI:
 		r = 1;
 		break;
 	case KVM_CAP_COALESCED_MMIO:
@@ -432,6 +433,13 @@ int kvm_arch_vcpu_ioctl_run(struct kvm_vcpu *vcpu, struct kvm_run *run)
 		if (!vcpu->arch.dcr_is_write)
 			kvmppc_complete_dcr_load(vcpu, run);
 		vcpu->arch.dcr_needed = 0;
+	} else if (vcpu->arch.osi_needed) {
+		u64 *gprs = run->osi.gprs;
+		int i;
+
+		for (i = 0; i < 32; i++)
+			kvmppc_set_gpr(vcpu, i, gprs[i]);
+		vcpu->arch.osi_needed = 0;
 	}
 
 	kvmppc_core_deliver_interrupts(vcpu);
@@ -474,6 +482,10 @@ static int kvm_vcpu_ioctl_enable_cap(struct kvm_vcpu *vcpu,
 		return -EINVAL;
 
 	switch (cap->cap) {
+	case KVM_CAP_PPC_OSI:
+		r = 0;
+		vcpu->arch.osi_enabled = true;
+		break;
 	default:
 		r = -EINVAL;
 		break;
diff --git a/include/linux/kvm.h b/include/linux/kvm.h
index d9e920e..16ab618 100644
--- a/include/linux/kvm.h
+++ b/include/linux/kvm.h
@@ -160,6 +160,7 @@ struct kvm_pit_config {
 #define KVM_EXIT_DCR              15
 #define KVM_EXIT_NMI              16
 #define KVM_EXIT_INTERNAL_ERROR   17
+#define KVM_EXIT_OSI              18
 
 /* For KVM_EXIT_INTERNAL_ERROR */
 #define KVM_INTERNAL_ERROR_EMULATION 1
@@ -259,6 +260,10 @@ struct kvm_run {
 			__u32 ndata;
 			__u64 data[16];
 		} internal;
+		/* KVM_EXIT_OSI */
+		struct {
+			__u64 gprs[32];
+		} osi;
 		/* Fix the size of the union. */
 		char padding[256];
 	};
@@ -516,6 +521,7 @@ struct kvm_enable_cap {
 #define KVM_CAP_DEBUGREGS 50
 #endif
 #define KVM_CAP_X86_ROBUST_SINGLESTEP 51
+#define KVM_CAP_PPC_OSI 52
 #define KVM_CAP_PPC_UNSET_IRQ 53
 #define KVM_CAP_ENABLE_CAP 54
 
-- 
1.6.0.2

[PATCH 20/21] KVM: PPC: Make bools bitfields

[Alexander Graf]

Bool defaults to at least byte width. We usually only want to waste a single
bit on this. So let's move all the bool values to bitfields, potentially
saving memory.

Signed-off-by: Alexander Graf <agraf@suse.de>
---
 arch/powerpc/include/asm/kvm_book3s.h |   28 ++++++++++++++--------------
 arch/powerpc/include/asm/kvm_host.h   |    6 +++---
 2 files changed, 17 insertions(+), 17 deletions(-)

diff --git a/arch/powerpc/include/asm/kvm_book3s.h b/arch/powerpc/include/asm/kvm_book3s.h
index 8a6b4c5..ee79921 100644
--- a/arch/powerpc/include/asm/kvm_book3s.h
+++ b/arch/powerpc/include/asm/kvm_book3s.h
@@ -29,40 +29,40 @@ struct kvmppc_slb {
 	u64 vsid;
 	u64 orige;
 	u64 origv;
-	bool valid;
-	bool Ks;
-	bool Kp;
-	bool nx;
-	bool large;	/* PTEs are 16MB */
-	bool tb;	/* 1TB segment */
-	bool class;
+	bool valid	: 1;
+	bool Ks		: 1;
+	bool Kp		: 1;
+	bool nx		: 1;
+	bool large	: 1;	/* PTEs are 16MB */
+	bool tb		: 1;	/* 1TB segment */
+	bool class	: 1;
 };
 
 struct kvmppc_sr {
 	u32 raw;
 	u32 vsid;
-	bool Ks;
-	bool Kp;
-	bool nx;
-	bool valid;
+	bool Ks		: 1;
+	bool Kp		: 1;
+	bool nx		: 1;
+	bool valid	: 1;
 };
 
 struct kvmppc_bat {
 	u64 raw;
 	u32 bepi;
 	u32 bepi_mask;
-	bool vs;
-	bool vp;
 	u32 brpn;
 	u8 wimg;
 	u8 pp;
+	bool vs		: 1;
+	bool vp		: 1;
 };
 
 struct kvmppc_sid_map {
 	u64 guest_vsid;
 	u64 guest_esid;
 	u64 host_vsid;
-	bool valid;
+	bool valid	: 1;
 };
 
 #define SID_MAP_BITS    9
diff --git a/arch/powerpc/include/asm/kvm_host.h b/arch/powerpc/include/asm/kvm_host.h
index 486f1ca..5869a48 100644
--- a/arch/powerpc/include/asm/kvm_host.h
+++ b/arch/powerpc/include/asm/kvm_host.h
@@ -127,9 +127,9 @@ struct kvmppc_pte {
 	u64 eaddr;
 	u64 vpage;
 	u64 raddr;
-	bool may_read;
-	bool may_write;
-	bool may_execute;
+	bool may_read		: 1;
+	bool may_write		: 1;
+	bool may_execute	: 1;
 };
 
 struct kvmppc_mmu {
-- 
1.6.0.2

[PATCH 20/21] KVM: PPC: Make bools bitfields

[Alexander Graf]

Bool defaults to at least byte width. We usually only want to waste a single
bit on this. So let's move all the bool values to bitfields, potentially
saving memory.

Signed-off-by: Alexander Graf <agraf-l3A5Bk7waGM@public.gmane.org>
---
 arch/powerpc/include/asm/kvm_book3s.h |   28 ++++++++++++++--------------
 arch/powerpc/include/asm/kvm_host.h   |    6 +++---
 2 files changed, 17 insertions(+), 17 deletions(-)

diff --git a/arch/powerpc/include/asm/kvm_book3s.h b/arch/powerpc/include/asm/kvm_book3s.h
index 8a6b4c5..ee79921 100644
--- a/arch/powerpc/include/asm/kvm_book3s.h
+++ b/arch/powerpc/include/asm/kvm_book3s.h
@@ -29,40 +29,40 @@ struct kvmppc_slb {
 	u64 vsid;
 	u64 orige;
 	u64 origv;
-	bool valid;
-	bool Ks;
-	bool Kp;
-	bool nx;
-	bool large;	/* PTEs are 16MB */
-	bool tb;	/* 1TB segment */
-	bool class;
+	bool valid	: 1;
+	bool Ks		: 1;
+	bool Kp		: 1;
+	bool nx		: 1;
+	bool large	: 1;	/* PTEs are 16MB */
+	bool tb		: 1;	/* 1TB segment */
+	bool class	: 1;
 };
 
 struct kvmppc_sr {
 	u32 raw;
 	u32 vsid;
-	bool Ks;
-	bool Kp;
-	bool nx;
-	bool valid;
+	bool Ks		: 1;
+	bool Kp		: 1;
+	bool nx		: 1;
+	bool valid	: 1;
 };
 
 struct kvmppc_bat {
 	u64 raw;
 	u32 bepi;
 	u32 bepi_mask;
-	bool vs;
-	bool vp;
 	u32 brpn;
 	u8 wimg;
 	u8 pp;
+	bool vs		: 1;
+	bool vp		: 1;
 };
 
 struct kvmppc_sid_map {
 	u64 guest_vsid;
 	u64 guest_esid;
 	u64 host_vsid;
-	bool valid;
+	bool valid	: 1;
 };
 
 #define SID_MAP_BITS    9
diff --git a/arch/powerpc/include/asm/kvm_host.h b/arch/powerpc/include/asm/kvm_host.h
index 486f1ca..5869a48 100644
--- a/arch/powerpc/include/asm/kvm_host.h
+++ b/arch/powerpc/include/asm/kvm_host.h
@@ -127,9 +127,9 @@ struct kvmppc_pte {
 	u64 eaddr;
 	u64 vpage;
 	u64 raddr;
-	bool may_read;
-	bool may_write;
-	bool may_execute;
+	bool may_read		: 1;
+	bool may_write		: 1;
+	bool may_execute	: 1;
 };
 
 struct kvmppc_mmu {
-- 
1.6.0.2

[PATCH 21/21] KVM: PPC: Disable MSR_FEx for Cell hosts

[Alexander Graf]

Cell can't handle MSR_FE0 and MSR_FE1 too well. It gets dog slow.
So let's just override the guest whenever we see one of the two and mask them
out. See commit ddf5f75a16b3e7460ffee881795aa168dffcd0cf for reference.

Signed-off-by: Alexander Graf <agraf@suse.de>
---
 arch/powerpc/kvm/book3s.c |    4 ++++
 1 files changed, 4 insertions(+), 0 deletions(-)

diff --git a/arch/powerpc/kvm/book3s.c b/arch/powerpc/kvm/book3s.c
index 1a12ef2..a7ab2ea 100644
--- a/arch/powerpc/kvm/book3s.c
+++ b/arch/powerpc/kvm/book3s.c
@@ -356,6 +356,10 @@ void kvmppc_set_pvr(struct kvm_vcpu *vcpu, u32 pvr)
 	    !strcmp(cur_cpu_spec->platform, "ppc970"))
 		vcpu->arch.hflags |= BOOK3S_HFLAG_DCBZ32;
 
+	/* Cell performs badly if MSR_FEx are set. So let's hope nobody
+	   really needs them in a VM on Cell and force disable them. */
+	if (!strcmp(cur_cpu_spec->platform, "ppc-cell-be"))
+		to_book3s(vcpu)->msr_mask &= ~(MSR_FE0 | MSR_FE1);
 }
 
 /* Book3s_32 CPUs always have 32 bytes cache line size, which Linux assumes. To
-- 
1.6.0.2

[PATCH 21/21] KVM: PPC: Disable MSR_FEx for Cell hosts

[Alexander Graf]

Cell can't handle MSR_FE0 and MSR_FE1 too well. It gets dog slow.
So let's just override the guest whenever we see one of the two and mask them
out. See commit ddf5f75a16b3e7460ffee881795aa168dffcd0cf for reference.

Signed-off-by: Alexander Graf <agraf-l3A5Bk7waGM@public.gmane.org>
---
 arch/powerpc/kvm/book3s.c |    4 ++++
 1 files changed, 4 insertions(+), 0 deletions(-)

diff --git a/arch/powerpc/kvm/book3s.c b/arch/powerpc/kvm/book3s.c
index 1a12ef2..a7ab2ea 100644
--- a/arch/powerpc/kvm/book3s.c
+++ b/arch/powerpc/kvm/book3s.c
@@ -356,6 +356,10 @@ void kvmppc_set_pvr(struct kvm_vcpu *vcpu, u32 pvr)
 	    !strcmp(cur_cpu_spec->platform, "ppc970"))
 		vcpu->arch.hflags |= BOOK3S_HFLAG_DCBZ32;
 
+	/* Cell performs badly if MSR_FEx are set. So let's hope nobody
+	   really needs them in a VM on Cell and force disable them. */
+	if (!strcmp(cur_cpu_spec->platform, "ppc-cell-be"))
+		to_book3s(vcpu)->msr_mask &= ~(MSR_FE0 | MSR_FE1);
 }
 
 /* Book3s_32 CPUs always have 32 bytes cache line size, which Linux assumes. To
-- 
1.6.0.2

Re: [PATCH 00/21] KVM: PPC: MOL bringup patches v3

[Avi Kivity]

On 03/24/2010 10:48 PM, Alexander Graf wrote:
> Mac-on-Linux has always lacked PPC64 host support. This is going to
> change now!
>
> This patchset contains minor patches to enable MOL, but is mostly about
> bug fixes that came out of running Mac OS X. With this set and the
> current svn version of MOL I have 10.4.11 running as a guest on a 970MP
> as well as a PS3 host.
>
>    

Applied all, thanks.

-- 
error compiling committee.c: too many arguments to function

Re: [PATCH 00/21] KVM: PPC: MOL bringup patches v3

[Avi Kivity]

On 03/24/2010 10:48 PM, Alexander Graf wrote:
> Mac-on-Linux has always lacked PPC64 host support. This is going to
> change now!
>
> This patchset contains minor patches to enable MOL, but is mostly about
> bug fixes that came out of running Mac OS X. With this set and the
> current svn version of MOL I have 10.4.11 running as a guest on a 970MP
> as well as a PS3 host.
>
>    

Applied all, thanks.

-- 
error compiling committee.c: too many arguments to function

[PATCH 10/21] KVM: PPC: Make XER load 32 bit

[Alexander Graf]

We have a 32 bit value in the PACA to store XER in. We also do an stw
when storing XER in there. But then we load it with ld, completely
screwing it up on every entry.

Welcome to the Big Endian world.

Signed-off-by: Alexander Graf <agraf@suse.de>
---
 arch/powerpc/kvm/book3s_64_slb.S |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)

diff --git a/arch/powerpc/kvm/book3s_64_slb.S b/arch/powerpc/kvm/book3s_64_slb.S
index 35b7627..0919679 100644
--- a/arch/powerpc/kvm/book3s_64_slb.S
+++ b/arch/powerpc/kvm/book3s_64_slb.S
@@ -145,7 +145,7 @@ slb_do_enter:
 	lwz	r11, (PACA_KVM_CR)(r13)
 	mtcr	r11
 
-	ld	r11, (PACA_KVM_XER)(r13)
+	lwz	r11, (PACA_KVM_XER)(r13)
 	mtxer	r11
 
 	ld	r11, (PACA_KVM_R11)(r13)
-- 
1.6.0.2

[PATCH 10/21] KVM: PPC: Make XER load 32 bit

[Alexander Graf]

We have a 32 bit value in the PACA to store XER in. We also do an stw
when storing XER in there. But then we load it with ld, completely
screwing it up on every entry.

Welcome to the Big Endian world.

Signed-off-by: Alexander Graf <agraf@suse.de>
---
 arch/powerpc/kvm/book3s_64_slb.S |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)

diff --git a/arch/powerpc/kvm/book3s_64_slb.S b/arch/powerpc/kvm/book3s_64_slb.S
index 35b7627..0919679 100644
--- a/arch/powerpc/kvm/book3s_64_slb.S
+++ b/arch/powerpc/kvm/book3s_64_slb.S
@@ -145,7 +145,7 @@ slb_do_enter:
 	lwz	r11, (PACA_KVM_CR)(r13)
 	mtcr	r11
 
-	ld	r11, (PACA_KVM_XER)(r13)
+	lwz	r11, (PACA_KVM_XER)(r13)
 	mtxer	r11
 
 	ld	r11, (PACA_KVM_R11)(r13)
-- 
1.6.0.2

[PATCH 12/21] KVM: PPC: Implement alignment interrupt

[Alexander Graf]

Mac OS X has some applications - namely the Finder - that require alignment
interrupts to work properly. So we need to implement them.

But the spec for 970 and 750 also looks different. While 750 requires the
DSISR and DAR fields to reflect some instruction bits (DSISR) and the fault
address (DAR), the 970 declares this as an optional feature. So we need
to reconstruct DSISR and DAR manually.

Signed-off-by: Alexander Graf <agraf@suse.de>

---

v2 -> v3:

 - add emulation for stfs, stfd, lfd
 - add DAR emulation
---
 arch/powerpc/include/asm/kvm_book3s.h |    2 +
 arch/powerpc/kvm/book3s.c             |   10 ++++
 arch/powerpc/kvm/book3s_64_emulate.c  |   75 +++++++++++++++++++++++++++++++++
 3 files changed, 87 insertions(+), 0 deletions(-)

diff --git a/arch/powerpc/include/asm/kvm_book3s.h b/arch/powerpc/include/asm/kvm_book3s.h
index b47b2f5..bea7637 100644
--- a/arch/powerpc/include/asm/kvm_book3s.h
+++ b/arch/powerpc/include/asm/kvm_book3s.h
@@ -131,6 +131,8 @@ extern void kvmppc_rmcall(ulong srr0, ulong srr1);
 extern void kvmppc_load_up_fpu(void);
 extern void kvmppc_load_up_altivec(void);
 extern void kvmppc_load_up_vsx(void);
+extern u32 kvmppc_alignment_dsisr(struct kvm_vcpu *vcpu, unsigned int inst);
+extern ulong kvmppc_alignment_dar(struct kvm_vcpu *vcpu, unsigned int inst);
 
 static inline struct kvmppc_vcpu_book3s *to_book3s(struct kvm_vcpu *vcpu)
 {
diff --git a/arch/powerpc/kvm/book3s.c b/arch/powerpc/kvm/book3s.c
index 585dc91..130a9a1 100644
--- a/arch/powerpc/kvm/book3s.c
+++ b/arch/powerpc/kvm/book3s.c
@@ -905,6 +905,16 @@ program_interrupt:
 		}
 		break;
 	}
+	case BOOK3S_INTERRUPT_ALIGNMENT:
+		if (kvmppc_read_inst(vcpu) = EMULATE_DONE) {
+			to_book3s(vcpu)->dsisr = kvmppc_alignment_dsisr(vcpu,
+				vcpu->arch.last_inst);
+			vcpu->arch.dear = kvmppc_alignment_dar(vcpu,
+				vcpu->arch.last_inst);
+			kvmppc_book3s_queue_irqprio(vcpu, exit_nr);
+		}
+		r = RESUME_GUEST;
+		break;
 	case BOOK3S_INTERRUPT_MACHINE_CHECK:
 	case BOOK3S_INTERRUPT_TRACE:
 		kvmppc_book3s_queue_irqprio(vcpu, exit_nr);
diff --git a/arch/powerpc/kvm/book3s_64_emulate.c b/arch/powerpc/kvm/book3s_64_emulate.c
index 39d5003..1e5cf8d 100644
--- a/arch/powerpc/kvm/book3s_64_emulate.c
+++ b/arch/powerpc/kvm/book3s_64_emulate.c
@@ -44,6 +44,11 @@
 /* DCBZ is actually 1014, but we patch it to 1010 so we get a trap */
 #define OP_31_XOP_DCBZ		1010
 
+#define OP_LFS			48
+#define OP_LFD			50
+#define OP_STFS			52
+#define OP_STFD			54
+
 #define SPRN_GQR0		912
 #define SPRN_GQR1		913
 #define SPRN_GQR2		914
@@ -474,3 +479,73 @@ int kvmppc_core_emulate_mfspr(struct kvm_vcpu *vcpu, int sprn, int rt)
 	return emulated;
 }
 
+u32 kvmppc_alignment_dsisr(struct kvm_vcpu *vcpu, unsigned int inst)
+{
+	u32 dsisr = 0;
+
+	/*
+	 * This is what the spec says about DSISR bits (not mentioned = 0):
+	 *
+	 * 12:13		[DS]	Set to bits 30:31
+	 * 15:16		[X]	Set to bits 29:30
+	 * 17			[X]	Set to bit 25
+	 *			[D/DS]	Set to bit 5
+	 * 18:21		[X]	Set to bits 21:24
+	 *			[D/DS]	Set to bits 1:4
+	 * 22:26			Set to bits 6:10 (RT/RS/FRT/FRS)
+	 * 27:31			Set to bits 11:15 (RA)
+	 */
+
+	switch (get_op(inst)) {
+	/* D-form */
+	case OP_LFS:
+	case OP_LFD:
+	case OP_STFD:
+	case OP_STFS:
+		dsisr |= (inst >> 12) & 0x4000;	/* bit 17 */
+		dsisr |= (inst >> 17) & 0x3c00; /* bits 18:21 */
+		break;
+	/* X-form */
+	case 31:
+		dsisr |= (inst << 14) & 0x18000; /* bits 15:16 */
+		dsisr |= (inst << 8)  & 0x04000; /* bit 17 */
+		dsisr |= (inst << 3)  & 0x03c00; /* bits 18:21 */
+		break;
+	default:
+		printk(KERN_INFO "KVM: Unaligned instruction 0x%x\n", inst);
+		break;
+	}
+
+	dsisr |= (inst >> 16) & 0x03ff; /* bits 22:31 */
+
+	return dsisr;
+}
+
+ulong kvmppc_alignment_dar(struct kvm_vcpu *vcpu, unsigned int inst)
+{
+	ulong dar = 0;
+	ulong ra;
+
+	switch (get_op(inst)) {
+	case OP_LFS:
+	case OP_LFD:
+	case OP_STFD:
+	case OP_STFS:
+		ra = get_ra(inst);
+		if (ra)
+			dar = kvmppc_get_gpr(vcpu, ra);
+		dar += (s32)((s16)inst);
+		break;
+	case 31:
+		ra = get_ra(inst);
+		if (ra)
+			dar = kvmppc_get_gpr(vcpu, ra);
+		dar += kvmppc_get_gpr(vcpu, get_rb(inst));
+		break;
+	default:
+		printk(KERN_INFO "KVM: Unaligned instruction 0x%x\n", inst);
+		break;
+	}
+
+	return dar;
+}
-- 
1.6.0.2

[PATCH 12/21] KVM: PPC: Implement alignment interrupt

[Alexander Graf]

Mac OS X has some applications - namely the Finder - that require alignment
interrupts to work properly. So we need to implement them.

But the spec for 970 and 750 also looks different. While 750 requires the
DSISR and DAR fields to reflect some instruction bits (DSISR) and the fault
address (DAR), the 970 declares this as an optional feature. So we need
to reconstruct DSISR and DAR manually.

Signed-off-by: Alexander Graf <agraf@suse.de>

---

v2 -> v3:

 - add emulation for stfs, stfd, lfd
 - add DAR emulation
---
 arch/powerpc/include/asm/kvm_book3s.h |    2 +
 arch/powerpc/kvm/book3s.c             |   10 ++++
 arch/powerpc/kvm/book3s_64_emulate.c  |   75 +++++++++++++++++++++++++++++++++
 3 files changed, 87 insertions(+), 0 deletions(-)

diff --git a/arch/powerpc/include/asm/kvm_book3s.h b/arch/powerpc/include/asm/kvm_book3s.h
index b47b2f5..bea7637 100644
--- a/arch/powerpc/include/asm/kvm_book3s.h
+++ b/arch/powerpc/include/asm/kvm_book3s.h
@@ -131,6 +131,8 @@ extern void kvmppc_rmcall(ulong srr0, ulong srr1);
 extern void kvmppc_load_up_fpu(void);
 extern void kvmppc_load_up_altivec(void);
 extern void kvmppc_load_up_vsx(void);
+extern u32 kvmppc_alignment_dsisr(struct kvm_vcpu *vcpu, unsigned int inst);
+extern ulong kvmppc_alignment_dar(struct kvm_vcpu *vcpu, unsigned int inst);
 
 static inline struct kvmppc_vcpu_book3s *to_book3s(struct kvm_vcpu *vcpu)
 {
diff --git a/arch/powerpc/kvm/book3s.c b/arch/powerpc/kvm/book3s.c
index 585dc91..130a9a1 100644
--- a/arch/powerpc/kvm/book3s.c
+++ b/arch/powerpc/kvm/book3s.c
@@ -905,6 +905,16 @@ program_interrupt:
 		}
 		break;
 	}
+	case BOOK3S_INTERRUPT_ALIGNMENT:
+		if (kvmppc_read_inst(vcpu) == EMULATE_DONE) {
+			to_book3s(vcpu)->dsisr = kvmppc_alignment_dsisr(vcpu,
+				vcpu->arch.last_inst);
+			vcpu->arch.dear = kvmppc_alignment_dar(vcpu,
+				vcpu->arch.last_inst);
+			kvmppc_book3s_queue_irqprio(vcpu, exit_nr);
+		}
+		r = RESUME_GUEST;
+		break;
 	case BOOK3S_INTERRUPT_MACHINE_CHECK:
 	case BOOK3S_INTERRUPT_TRACE:
 		kvmppc_book3s_queue_irqprio(vcpu, exit_nr);
diff --git a/arch/powerpc/kvm/book3s_64_emulate.c b/arch/powerpc/kvm/book3s_64_emulate.c
index 39d5003..1e5cf8d 100644
--- a/arch/powerpc/kvm/book3s_64_emulate.c
+++ b/arch/powerpc/kvm/book3s_64_emulate.c
@@ -44,6 +44,11 @@
 /* DCBZ is actually 1014, but we patch it to 1010 so we get a trap */
 #define OP_31_XOP_DCBZ		1010
 
+#define OP_LFS			48
+#define OP_LFD			50
+#define OP_STFS			52
+#define OP_STFD			54
+
 #define SPRN_GQR0		912
 #define SPRN_GQR1		913
 #define SPRN_GQR2		914
@@ -474,3 +479,73 @@ int kvmppc_core_emulate_mfspr(struct kvm_vcpu *vcpu, int sprn, int rt)
 	return emulated;
 }
 
+u32 kvmppc_alignment_dsisr(struct kvm_vcpu *vcpu, unsigned int inst)
+{
+	u32 dsisr = 0;
+
+	/*
+	 * This is what the spec says about DSISR bits (not mentioned = 0):
+	 *
+	 * 12:13		[DS]	Set to bits 30:31
+	 * 15:16		[X]	Set to bits 29:30
+	 * 17			[X]	Set to bit 25
+	 *			[D/DS]	Set to bit 5
+	 * 18:21		[X]	Set to bits 21:24
+	 *			[D/DS]	Set to bits 1:4
+	 * 22:26			Set to bits 6:10 (RT/RS/FRT/FRS)
+	 * 27:31			Set to bits 11:15 (RA)
+	 */
+
+	switch (get_op(inst)) {
+	/* D-form */
+	case OP_LFS:
+	case OP_LFD:
+	case OP_STFD:
+	case OP_STFS:
+		dsisr |= (inst >> 12) & 0x4000;	/* bit 17 */
+		dsisr |= (inst >> 17) & 0x3c00; /* bits 18:21 */
+		break;
+	/* X-form */
+	case 31:
+		dsisr |= (inst << 14) & 0x18000; /* bits 15:16 */
+		dsisr |= (inst << 8)  & 0x04000; /* bit 17 */
+		dsisr |= (inst << 3)  & 0x03c00; /* bits 18:21 */
+		break;
+	default:
+		printk(KERN_INFO "KVM: Unaligned instruction 0x%x\n", inst);
+		break;
+	}
+
+	dsisr |= (inst >> 16) & 0x03ff; /* bits 22:31 */
+
+	return dsisr;
+}
+
+ulong kvmppc_alignment_dar(struct kvm_vcpu *vcpu, unsigned int inst)
+{
+	ulong dar = 0;
+	ulong ra;
+
+	switch (get_op(inst)) {
+	case OP_LFS:
+	case OP_LFD:
+	case OP_STFD:
+	case OP_STFS:
+		ra = get_ra(inst);
+		if (ra)
+			dar = kvmppc_get_gpr(vcpu, ra);
+		dar += (s32)((s16)inst);
+		break;
+	case 31:
+		ra = get_ra(inst);
+		if (ra)
+			dar = kvmppc_get_gpr(vcpu, ra);
+		dar += kvmppc_get_gpr(vcpu, get_rb(inst));
+		break;
+	default:
+		printk(KERN_INFO "KVM: Unaligned instruction 0x%x\n", inst);
+		break;
+	}
+
+	return dar;
+}
-- 
1.6.0.2

[PATCH 13/21] KVM: Add support for enabling capabilities per-vcpu

[Alexander Graf]

Some times we don't want all capabilities to be available to all
our vcpus. One example for that is the OSI interface, implemented
in the next patch.

In order to have a generic mechanism in how to enable capabilities
individually, this patch introduces a new ioctl that can be used
for this purpose. That way features we don't want in all guests or
userspace configurations can just not be enabled and we're good.

Signed-off-by: Alexander Graf <agraf@suse.de>

---

v1 -> v2:

  - Add flags to enable_cap
  - Update documentation for kvm_enable_cap

v2 -> v3:

  - Add CAP for ENABLE_CAP
  - Improve documentation for ENABLE_CAP
---
 Documentation/kvm/api.txt  |   35 +++++++++++++++++++++++++++++++++++
 arch/powerpc/kvm/powerpc.c |   27 +++++++++++++++++++++++++++
 include/linux/kvm.h        |   12 ++++++++++++
 3 files changed, 74 insertions(+), 0 deletions(-)

diff --git a/Documentation/kvm/api.txt b/Documentation/kvm/api.txt
index d170cb4..3da2240 100644
--- a/Documentation/kvm/api.txt
+++ b/Documentation/kvm/api.txt
@@ -749,6 +749,41 @@ Writes debug registers into the vcpu.
 See KVM_GET_DEBUGREGS for the data structure. The flags field is unused
 yet and must be cleared on entry.
 
+4.34 KVM_ENABLE_CAP
+
+Capability: KVM_CAP_ENABLE_CAP
+Architectures: ppc
+Type: vcpu ioctl
+Parameters: struct kvm_enable_cap (in)
+Returns: 0 on success; -1 on error
+
+Not all extensions are enabled by default. Using this ioctl the application
+can enable an extension, making it available to the guest.
+
+On systems that do not support this ioctl, it always fails. On systems that
+do support it, it only works for extensions that are supported for enablement.
+
+To check if a capability can be enabled, the KVM_CHECK_EXTENSION ioctl should
+be used.
+
+struct kvm_enable_cap {
+       /* in */
+       __u32 cap;
+
+The capability that is supposed to get enabled.
+
+       __u32 flags;
+
+A bitfield indicating future enhancements. Has to be 0 for now.
+
+       __u64 args[4];
+
+Arguments for enabling a feature. If a feature needs initial values to
+function properly, this is the place to put them.
+
+       __u8  pad[64];
+};
+
 
 5. The kvm_run structure
 
diff --git a/arch/powerpc/kvm/powerpc.c b/arch/powerpc/kvm/powerpc.c
index af873d9..2092157 100644
--- a/arch/powerpc/kvm/powerpc.c
+++ b/arch/powerpc/kvm/powerpc.c
@@ -149,6 +149,7 @@ int kvm_dev_ioctl_check_extension(long ext)
 	case KVM_CAP_PPC_SEGSTATE:
 	case KVM_CAP_PPC_PAIRED_SINGLES:
 	case KVM_CAP_PPC_UNSET_IRQ:
+	case KVM_CAP_ENABLE_CAP:
 		r = 1;
 		break;
 	case KVM_CAP_COALESCED_MMIO:
@@ -464,6 +465,23 @@ int kvm_vcpu_ioctl_interrupt(struct kvm_vcpu *vcpu, struct kvm_interrupt *irq)
 	return 0;
 }
 
+static int kvm_vcpu_ioctl_enable_cap(struct kvm_vcpu *vcpu,
+				     struct kvm_enable_cap *cap)
+{
+	int r;
+
+	if (cap->flags)
+		return -EINVAL;
+
+	switch (cap->cap) {
+	default:
+		r = -EINVAL;
+		break;
+	}
+
+	return r;
+}
+
 int kvm_arch_vcpu_ioctl_get_mpstate(struct kvm_vcpu *vcpu,
                                     struct kvm_mp_state *mp_state)
 {
@@ -492,6 +510,15 @@ long kvm_arch_vcpu_ioctl(struct file *filp,
 		r = kvm_vcpu_ioctl_interrupt(vcpu, &irq);
 		break;
 	}
+	case KVM_ENABLE_CAP:
+	{
+		struct kvm_enable_cap cap;
+		r = -EFAULT;
+		if (copy_from_user(&cap, argp, sizeof(cap)))
+			goto out;
+		r = kvm_vcpu_ioctl_enable_cap(vcpu, &cap);
+		break;
+	}
 	default:
 		r = -EINVAL;
 	}
diff --git a/include/linux/kvm.h b/include/linux/kvm.h
index c36d093..d9e920e 100644
--- a/include/linux/kvm.h
+++ b/include/linux/kvm.h
@@ -400,6 +400,15 @@ struct kvm_ioeventfd {
 	__u8  pad[36];
 };
 
+/* for KVM_ENABLE_CAP */
+struct kvm_enable_cap {
+	/* in */
+	__u32 cap;
+	__u32 flags;
+	__u64 args[4];
+	__u8  pad[64];
+};
+
 #define KVMIO 0xAE
 
 /*
@@ -508,6 +517,7 @@ struct kvm_ioeventfd {
 #endif
 #define KVM_CAP_X86_ROBUST_SINGLESTEP 51
 #define KVM_CAP_PPC_UNSET_IRQ 53
+#define KVM_CAP_ENABLE_CAP 54
 
 #ifdef KVM_CAP_IRQ_ROUTING
 
@@ -697,6 +707,8 @@ struct kvm_clock_data {
 /* Available with KVM_CAP_DEBUGREGS */
 #define KVM_GET_DEBUGREGS         _IOR(KVMIO,  0xa1, struct kvm_debugregs)
 #define KVM_SET_DEBUGREGS         _IOW(KVMIO,  0xa2, struct kvm_debugregs)
+/* No need for CAP, because then it just always fails */
+#define KVM_ENABLE_CAP            _IOW(KVMIO,  0xa3, struct kvm_enable_cap)
 
 #define KVM_DEV_ASSIGN_ENABLE_IOMMU	(1 << 0)
 
-- 
1.6.0.2

[PATCH 13/21] KVM: Add support for enabling capabilities per-vcpu

[Alexander Graf]

Some times we don't want all capabilities to be available to all
our vcpus. One example for that is the OSI interface, implemented
in the next patch.

In order to have a generic mechanism in how to enable capabilities
individually, this patch introduces a new ioctl that can be used
for this purpose. That way features we don't want in all guests or
userspace configurations can just not be enabled and we're good.

Signed-off-by: Alexander Graf <agraf@suse.de>

---

v1 -> v2:

  - Add flags to enable_cap
  - Update documentation for kvm_enable_cap

v2 -> v3:

  - Add CAP for ENABLE_CAP
  - Improve documentation for ENABLE_CAP
---
 Documentation/kvm/api.txt  |   35 +++++++++++++++++++++++++++++++++++
 arch/powerpc/kvm/powerpc.c |   27 +++++++++++++++++++++++++++
 include/linux/kvm.h        |   12 ++++++++++++
 3 files changed, 74 insertions(+), 0 deletions(-)

diff --git a/Documentation/kvm/api.txt b/Documentation/kvm/api.txt
index d170cb4..3da2240 100644
--- a/Documentation/kvm/api.txt
+++ b/Documentation/kvm/api.txt
@@ -749,6 +749,41 @@ Writes debug registers into the vcpu.
 See KVM_GET_DEBUGREGS for the data structure. The flags field is unused
 yet and must be cleared on entry.
 
+4.34 KVM_ENABLE_CAP
+
+Capability: KVM_CAP_ENABLE_CAP
+Architectures: ppc
+Type: vcpu ioctl
+Parameters: struct kvm_enable_cap (in)
+Returns: 0 on success; -1 on error
+
+Not all extensions are enabled by default. Using this ioctl the application
+can enable an extension, making it available to the guest.
+
+On systems that do not support this ioctl, it always fails. On systems that
+do support it, it only works for extensions that are supported for enablement.
+
+To check if a capability can be enabled, the KVM_CHECK_EXTENSION ioctl should
+be used.
+
+struct kvm_enable_cap {
+       /* in */
+       __u32 cap;
+
+The capability that is supposed to get enabled.
+
+       __u32 flags;
+
+A bitfield indicating future enhancements. Has to be 0 for now.
+
+       __u64 args[4];
+
+Arguments for enabling a feature. If a feature needs initial values to
+function properly, this is the place to put them.
+
+       __u8  pad[64];
+};
+
 
 5. The kvm_run structure
 
diff --git a/arch/powerpc/kvm/powerpc.c b/arch/powerpc/kvm/powerpc.c
index af873d9..2092157 100644
--- a/arch/powerpc/kvm/powerpc.c
+++ b/arch/powerpc/kvm/powerpc.c
@@ -149,6 +149,7 @@ int kvm_dev_ioctl_check_extension(long ext)
 	case KVM_CAP_PPC_SEGSTATE:
 	case KVM_CAP_PPC_PAIRED_SINGLES:
 	case KVM_CAP_PPC_UNSET_IRQ:
+	case KVM_CAP_ENABLE_CAP:
 		r = 1;
 		break;
 	case KVM_CAP_COALESCED_MMIO:
@@ -464,6 +465,23 @@ int kvm_vcpu_ioctl_interrupt(struct kvm_vcpu *vcpu, struct kvm_interrupt *irq)
 	return 0;
 }
 
+static int kvm_vcpu_ioctl_enable_cap(struct kvm_vcpu *vcpu,
+				     struct kvm_enable_cap *cap)
+{
+	int r;
+
+	if (cap->flags)
+		return -EINVAL;
+
+	switch (cap->cap) {
+	default:
+		r = -EINVAL;
+		break;
+	}
+
+	return r;
+}
+
 int kvm_arch_vcpu_ioctl_get_mpstate(struct kvm_vcpu *vcpu,
                                     struct kvm_mp_state *mp_state)
 {
@@ -492,6 +510,15 @@ long kvm_arch_vcpu_ioctl(struct file *filp,
 		r = kvm_vcpu_ioctl_interrupt(vcpu, &irq);
 		break;
 	}
+	case KVM_ENABLE_CAP:
+	{
+		struct kvm_enable_cap cap;
+		r = -EFAULT;
+		if (copy_from_user(&cap, argp, sizeof(cap)))
+			goto out;
+		r = kvm_vcpu_ioctl_enable_cap(vcpu, &cap);
+		break;
+	}
 	default:
 		r = -EINVAL;
 	}
diff --git a/include/linux/kvm.h b/include/linux/kvm.h
index c36d093..d9e920e 100644
--- a/include/linux/kvm.h
+++ b/include/linux/kvm.h
@@ -400,6 +400,15 @@ struct kvm_ioeventfd {
 	__u8  pad[36];
 };
 
+/* for KVM_ENABLE_CAP */
+struct kvm_enable_cap {
+	/* in */
+	__u32 cap;
+	__u32 flags;
+	__u64 args[4];
+	__u8  pad[64];
+};
+
 #define KVMIO 0xAE
 
 /*
@@ -508,6 +517,7 @@ struct kvm_ioeventfd {
 #endif
 #define KVM_CAP_X86_ROBUST_SINGLESTEP 51
 #define KVM_CAP_PPC_UNSET_IRQ 53
+#define KVM_CAP_ENABLE_CAP 54
 
 #ifdef KVM_CAP_IRQ_ROUTING
 
@@ -697,6 +707,8 @@ struct kvm_clock_data {
 /* Available with KVM_CAP_DEBUGREGS */
 #define KVM_GET_DEBUGREGS         _IOR(KVMIO,  0xa1, struct kvm_debugregs)
 #define KVM_SET_DEBUGREGS         _IOW(KVMIO,  0xa2, struct kvm_debugregs)
+/* No need for CAP, because then it just always fails */
+#define KVM_ENABLE_CAP            _IOW(KVMIO,  0xa3, struct kvm_enable_cap)
 
 #define KVM_DEV_ASSIGN_ENABLE_IOMMU	(1 << 0)
 
-- 
1.6.0.2

Re: [PATCH 13/21] KVM: Add support for enabling capabilities per-vcpu

[Avi Kivity]

On 03/24/2010 10:48 PM, Alexander Graf wrote:
> Some times we don't want all capabilities to be available to all
> our vcpus. One example for that is the OSI interface, implemented
> in the next patch.
>
> In order to have a generic mechanism in how to enable capabilities
> individually, this patch introduces a new ioctl that can be used
> for this purpose. That way features we don't want in all guests or
> userspace configurations can just not be enabled and we're good.
>
>   Documentation/kvm/api.txt  |   35 +++++++++++++++++++++++++++++++++++
>   arch/powerpc/kvm/powerpc.c |   27 +++++++++++++++++++++++++++
>   include/linux/kvm.h        |   12 ++++++++++++
>   3 files changed, 74 insertions(+), 0 deletions(-)
>
>    

Should really have been generic instead of ppc-specific, but can be 
moved later.

> @@ -697,6 +707,8 @@ struct kvm_clock_data {
>   /* Available with KVM_CAP_DEBUGREGS */
>   #define KVM_GET_DEBUGREGS         _IOR(KVMIO,  0xa1, struct kvm_debugregs)
>   #define KVM_SET_DEBUGREGS         _IOW(KVMIO,  0xa2, struct kvm_debugregs)
> +/* No need for CAP, because then it just always fails */
> +#define KVM_ENABLE_CAP            _IOW(KVMIO,  0xa3, struct kvm_enable_cap)
>    

I dropped this comment while applying.

-- 
error compiling committee.c: too many arguments to function

Re: [PATCH 13/21] KVM: Add support for enabling capabilities per-vcpu

[Avi Kivity]

On 03/24/2010 10:48 PM, Alexander Graf wrote:
> Some times we don't want all capabilities to be available to all
> our vcpus. One example for that is the OSI interface, implemented
> in the next patch.
>
> In order to have a generic mechanism in how to enable capabilities
> individually, this patch introduces a new ioctl that can be used
> for this purpose. That way features we don't want in all guests or
> userspace configurations can just not be enabled and we're good.
>
>   Documentation/kvm/api.txt  |   35 +++++++++++++++++++++++++++++++++++
>   arch/powerpc/kvm/powerpc.c |   27 +++++++++++++++++++++++++++
>   include/linux/kvm.h        |   12 ++++++++++++
>   3 files changed, 74 insertions(+), 0 deletions(-)
>
>    

Should really have been generic instead of ppc-specific, but can be 
moved later.

> @@ -697,6 +707,8 @@ struct kvm_clock_data {
>   /* Available with KVM_CAP_DEBUGREGS */
>   #define KVM_GET_DEBUGREGS         _IOR(KVMIO,  0xa1, struct kvm_debugregs)
>   #define KVM_SET_DEBUGREGS         _IOW(KVMIO,  0xa2, struct kvm_debugregs)
> +/* No need for CAP, because then it just always fails */
> +#define KVM_ENABLE_CAP            _IOW(KVMIO,  0xa3, struct kvm_enable_cap)
>    

I dropped this comment while applying.

-- 
error compiling committee.c: too many arguments to function

Re: [PATCH 13/21] KVM: Add support for enabling capabilities per-vcpu

[Alexander Graf]

On 01.04.2010, at 10:51, Avi Kivity wrote:

> On 03/24/2010 10:48 PM, Alexander Graf wrote:
>> Some times we don't want all capabilities to be available to all
>> our vcpus. One example for that is the OSI interface, implemented
>> in the next patch.
>> 
>> In order to have a generic mechanism in how to enable capabilities
>> individually, this patch introduces a new ioctl that can be used
>> for this purpose. That way features we don't want in all guests or
>> userspace configurations can just not be enabled and we're good.
>> 
>>  Documentation/kvm/api.txt  |   35 +++++++++++++++++++++++++++++++++++
>>  arch/powerpc/kvm/powerpc.c |   27 +++++++++++++++++++++++++++
>>  include/linux/kvm.h        |   12 ++++++++++++
>>  3 files changed, 74 insertions(+), 0 deletions(-)
>> 
>>   
> 
> Should really have been generic instead of ppc-specific, but can be moved later.

I didn't fully understand your comment about stuff being generic vs arch specific. But I assumed that since you know this ioctl exists now that whenever someone needs something similar now, it's easy to add support for it on other archs.

> 
>> @@ -697,6 +707,8 @@ struct kvm_clock_data {
>>  /* Available with KVM_CAP_DEBUGREGS */
>>  #define KVM_GET_DEBUGREGS         _IOR(KVMIO,  0xa1, struct kvm_debugregs)
>>  #define KVM_SET_DEBUGREGS         _IOW(KVMIO,  0xa2, struct kvm_debugregs)
>> +/* No need for CAP, because then it just always fails */
>> +#define KVM_ENABLE_CAP            _IOW(KVMIO,  0xa3, struct kvm_enable_cap)
>>   
> 
> I dropped this comment while applying.


Thanks.


Alex

Re: [PATCH 13/21] KVM: Add support for enabling capabilities per-vcpu

[Alexander Graf]

On 01.04.2010, at 10:51, Avi Kivity wrote:

> On 03/24/2010 10:48 PM, Alexander Graf wrote:
>> Some times we don't want all capabilities to be available to all
>> our vcpus. One example for that is the OSI interface, implemented
>> in the next patch.
>> 
>> In order to have a generic mechanism in how to enable capabilities
>> individually, this patch introduces a new ioctl that can be used
>> for this purpose. That way features we don't want in all guests or
>> userspace configurations can just not be enabled and we're good.
>> 
>>  Documentation/kvm/api.txt  |   35 +++++++++++++++++++++++++++++++++++
>>  arch/powerpc/kvm/powerpc.c |   27 +++++++++++++++++++++++++++
>>  include/linux/kvm.h        |   12 ++++++++++++
>>  3 files changed, 74 insertions(+), 0 deletions(-)
>> 
>>   
> 
> Should really have been generic instead of ppc-specific, but can be moved later.

I didn't fully understand your comment about stuff being generic vs arch specific. But I assumed that since you know this ioctl exists now that whenever someone needs something similar now, it's easy to add support for it on other archs.

> 
>> @@ -697,6 +707,8 @@ struct kvm_clock_data {
>>  /* Available with KVM_CAP_DEBUGREGS */
>>  #define KVM_GET_DEBUGREGS         _IOR(KVMIO,  0xa1, struct kvm_debugregs)
>>  #define KVM_SET_DEBUGREGS         _IOW(KVMIO,  0xa2, struct kvm_debugregs)
>> +/* No need for CAP, because then it just always fails */
>> +#define KVM_ENABLE_CAP            _IOW(KVMIO,  0xa3, struct kvm_enable_cap)
>>   
> 
> I dropped this comment while applying.


Thanks.


Alex

Re: [PATCH 13/21] KVM: Add support for enabling capabilities per-vcpu

[Avi Kivity]

On 04/01/2010 12:06 PM, Alexander Graf wrote:
> On 01.04.2010, at 10:51, Avi Kivity wrote:
>
>    
>> On 03/24/2010 10:48 PM, Alexander Graf wrote:
>>      
>>> Some times we don't want all capabilities to be available to all
>>> our vcpus. One example for that is the OSI interface, implemented
>>> in the next patch.
>>>
>>> In order to have a generic mechanism in how to enable capabilities
>>> individually, this patch introduces a new ioctl that can be used
>>> for this purpose. That way features we don't want in all guests or
>>> userspace configurations can just not be enabled and we're good.
>>>
>>>   Documentation/kvm/api.txt  |   35 +++++++++++++++++++++++++++++++++++
>>>   arch/powerpc/kvm/powerpc.c |   27 +++++++++++++++++++++++++++
>>>   include/linux/kvm.h        |   12 ++++++++++++
>>>   3 files changed, 74 insertions(+), 0 deletions(-)
>>>
>>>
>>>        
>> Should really have been generic instead of ppc-specific, but can be moved later.
>>      
> I didn't fully understand your comment about stuff being generic vs arch specific. But I assumed that since you know this ioctl exists now that whenever someone needs something similar now, it's easy to add support for it on other archs.
>    

There is nothing arch specific about the interface (though the various 
caps can be arch specific).  No need to add support, just move the code 
to virt/kvm and add an arch specific callout to handle the data.

-- 
error compiling committee.c: too many arguments to function

Re: [PATCH 13/21] KVM: Add support for enabling capabilities per-vcpu

[Avi Kivity]

On 04/01/2010 12:06 PM, Alexander Graf wrote:
> On 01.04.2010, at 10:51, Avi Kivity wrote:
>
>    
>> On 03/24/2010 10:48 PM, Alexander Graf wrote:
>>      
>>> Some times we don't want all capabilities to be available to all
>>> our vcpus. One example for that is the OSI interface, implemented
>>> in the next patch.
>>>
>>> In order to have a generic mechanism in how to enable capabilities
>>> individually, this patch introduces a new ioctl that can be used
>>> for this purpose. That way features we don't want in all guests or
>>> userspace configurations can just not be enabled and we're good.
>>>
>>>   Documentation/kvm/api.txt  |   35 +++++++++++++++++++++++++++++++++++
>>>   arch/powerpc/kvm/powerpc.c |   27 +++++++++++++++++++++++++++
>>>   include/linux/kvm.h        |   12 ++++++++++++
>>>   3 files changed, 74 insertions(+), 0 deletions(-)
>>>
>>>
>>>        
>> Should really have been generic instead of ppc-specific, but can be moved later.
>>      
> I didn't fully understand your comment about stuff being generic vs arch specific. But I assumed that since you know this ioctl exists now that whenever someone needs something similar now, it's easy to add support for it on other archs.
>    

There is nothing arch specific about the interface (though the various 
caps can be arch specific).  No need to add support, just move the code 
to virt/kvm and add an arch specific callout to handle the data.

-- 
error compiling committee.c: too many arguments to function

[PATCH 15/21] KVM: PPC: Make build work without CONFIG_VSX/ALTIVEC

[Alexander Graf]

The FPU/Altivec/VSX enablement also brought access to some structure
elements that are only defined when the respective config options
are enabled.

Unfortuately I forgot to check for the config options at some places,
so let's do that now.

Unbreaks the build when CONFIG_VSX is not set.

Signed-off-by: Alexander Graf <agraf@suse.de>
---
 arch/powerpc/kvm/book3s.c |    8 ++++++++
 1 files changed, 8 insertions(+), 0 deletions(-)

diff --git a/arch/powerpc/kvm/book3s.c b/arch/powerpc/kvm/book3s.c
index d6105d9..7912d72 100644
--- a/arch/powerpc/kvm/book3s.c
+++ b/arch/powerpc/kvm/book3s.c
@@ -608,7 +608,9 @@ void kvmppc_giveup_ext(struct kvm_vcpu *vcpu, ulong msr)
 {
 	struct thread_struct *t = &current->thread;
 	u64 *vcpu_fpr = vcpu->arch.fpr;
+#ifdef CONFIG_VSX
 	u64 *vcpu_vsx = vcpu->arch.vsr;
+#endif
 	u64 *thread_fpr = (u64*)t->fpr;
 	int i;
 
@@ -688,7 +690,9 @@ static int kvmppc_handle_ext(struct kvm_vcpu *vcpu, unsigned int exit_nr,
 {
 	struct thread_struct *t = &current->thread;
 	u64 *vcpu_fpr = vcpu->arch.fpr;
+#ifdef CONFIG_VSX
 	u64 *vcpu_vsx = vcpu->arch.vsr;
+#endif
 	u64 *thread_fpr = (u64*)t->fpr;
 	int i;
 
@@ -1219,8 +1223,12 @@ int __kvmppc_vcpu_run(struct kvm_run *kvm_run, struct kvm_vcpu *vcpu)
 {
 	int ret;
 	struct thread_struct ext_bkp;
+#ifdef CONFIG_ALTIVEC
 	bool save_vec = current->thread.used_vr;
+#endif
+#ifdef CONFIG_VSX
 	bool save_vsx = current->thread.used_vsr;
+#endif
 	ulong ext_msr;
 
 	/* No need to go into the guest when all we do is going out */
-- 
1.6.0.2

[PATCH 15/21] KVM: PPC: Make build work without CONFIG_VSX/ALTIVEC

[Alexander Graf]

The FPU/Altivec/VSX enablement also brought access to some structure
elements that are only defined when the respective config options
are enabled.

Unfortuately I forgot to check for the config options at some places,
so let's do that now.

Unbreaks the build when CONFIG_VSX is not set.

Signed-off-by: Alexander Graf <agraf@suse.de>
---
 arch/powerpc/kvm/book3s.c |    8 ++++++++
 1 files changed, 8 insertions(+), 0 deletions(-)

diff --git a/arch/powerpc/kvm/book3s.c b/arch/powerpc/kvm/book3s.c
index d6105d9..7912d72 100644
--- a/arch/powerpc/kvm/book3s.c
+++ b/arch/powerpc/kvm/book3s.c
@@ -608,7 +608,9 @@ void kvmppc_giveup_ext(struct kvm_vcpu *vcpu, ulong msr)
 {
 	struct thread_struct *t = &current->thread;
 	u64 *vcpu_fpr = vcpu->arch.fpr;
+#ifdef CONFIG_VSX
 	u64 *vcpu_vsx = vcpu->arch.vsr;
+#endif
 	u64 *thread_fpr = (u64*)t->fpr;
 	int i;
 
@@ -688,7 +690,9 @@ static int kvmppc_handle_ext(struct kvm_vcpu *vcpu, unsigned int exit_nr,
 {
 	struct thread_struct *t = &current->thread;
 	u64 *vcpu_fpr = vcpu->arch.fpr;
+#ifdef CONFIG_VSX
 	u64 *vcpu_vsx = vcpu->arch.vsr;
+#endif
 	u64 *thread_fpr = (u64*)t->fpr;
 	int i;
 
@@ -1219,8 +1223,12 @@ int __kvmppc_vcpu_run(struct kvm_run *kvm_run, struct kvm_vcpu *vcpu)
 {
 	int ret;
 	struct thread_struct ext_bkp;
+#ifdef CONFIG_ALTIVEC
 	bool save_vec = current->thread.used_vr;
+#endif
+#ifdef CONFIG_VSX
 	bool save_vsx = current->thread.used_vsr;
+#endif
 	ulong ext_msr;
 
 	/* No need to go into the guest when all we do is going out */
-- 
1.6.0.2

[PATCH 16/21] KVM: PPC: Fix dcbz emulation

[Alexander Graf]

On most systems we need to emulate dcbz when running 32 bit guests. So
far we've been rather slack, not giving correct DSISR values to the guest.

This patch makes the emulation more accurate, introducing a difference
between "page not mapped" and "write protection fault". While at it, it
also speeds up dcbz emulation by an order of magnitude by using kmap.

Signed-off-by: Alexander Graf <agraf@suse.de>
---
 arch/powerpc/kvm/book3s.c            |   56 +++++++++++++--------------------
 arch/powerpc/kvm/book3s_64_emulate.c |   19 +++++++++--
 2 files changed, 37 insertions(+), 38 deletions(-)

diff --git a/arch/powerpc/kvm/book3s.c b/arch/powerpc/kvm/book3s.c
index 7912d72..1a12ef2 100644
--- a/arch/powerpc/kvm/book3s.c
+++ b/arch/powerpc/kvm/book3s.c
@@ -28,6 +28,7 @@
 #include <asm/mmu_context.h>
 #include <linux/sched.h>
 #include <linux/vmalloc.h>
+#include <linux/highmem.h>
 
 #define VCPU_STAT(x) offsetof(struct kvm_vcpu, stat.x), KVM_STAT_VCPU
 
@@ -368,34 +369,29 @@ void kvmppc_set_pvr(struct kvm_vcpu *vcpu, u32 pvr)
  */
 static void kvmppc_patch_dcbz(struct kvm_vcpu *vcpu, struct kvmppc_pte *pte)
 {
-	bool touched = false;
-	hva_t hpage;
+	struct page *hpage;
+	u64 hpage_offset;
 	u32 *page;
 	int i;
 
-	hpage = gfn_to_hva(vcpu->kvm, pte->raddr >> PAGE_SHIFT);
-	if (kvm_is_error_hva(hpage))
+	hpage = gfn_to_page(vcpu->kvm, pte->raddr >> PAGE_SHIFT);
+	if (is_error_page(hpage))
 		return;
 
-	hpage |= pte->raddr & ~PAGE_MASK;
-	hpage &= ~0xFFFULL;
-
-	page = vmalloc(HW_PAGE_SIZE);
-
-	if (copy_from_user(page, (void __user *)hpage, HW_PAGE_SIZE))
-		goto out;
+	hpage_offset = pte->raddr & ~PAGE_MASK;
+	hpage_offset &= ~0xFFFULL;
+	hpage_offset /= 4;
 
-	for (i=0; i < HW_PAGE_SIZE / 4; i++)
-		if ((page[i] & 0xff0007ff) = INS_DCBZ) {
-			page[i] &= 0xfffffff7; // reserved instruction, so we trap
-			touched = true;
-		}
+	get_page(hpage);
+	page = kmap_atomic(hpage, KM_USER0);
 
-	if (touched)
-		copy_to_user((void __user *)hpage, page, HW_PAGE_SIZE);
+	/* patch dcbz into reserved instruction, so we trap */
+	for (i=hpage_offset; i < hpage_offset + (HW_PAGE_SIZE / 4); i++)
+		if ((page[i] & 0xff0007ff) = INS_DCBZ)
+			page[i] &= 0xfffffff7;
 
-out:
-	vfree(page);
+	kunmap_atomic(page, KM_USER0);
+	put_page(hpage);
 }
 
 static int kvmppc_xlate(struct kvm_vcpu *vcpu, ulong eaddr, bool data,
@@ -448,30 +444,21 @@ int kvmppc_st(struct kvm_vcpu *vcpu, ulong *eaddr, int size, void *ptr,
 	      bool data)
 {
 	struct kvmppc_pte pte;
-	hva_t hva = *eaddr;
 
 	vcpu->stat.st++;
 
 	if (kvmppc_xlate(vcpu, *eaddr, data, &pte))
-		goto nopte;
+		return -ENOENT;
 
 	*eaddr = pte.raddr;
 
-	hva = kvmppc_pte_to_hva(vcpu, &pte, false);
-	if (kvm_is_error_hva(hva))
-		goto mmio;
+	if (!pte.may_write)
+		return -EPERM;
 
-	if (copy_to_user((void __user *)hva, ptr, size)) {
-		printk(KERN_INFO "kvmppc_st at 0x%lx failed\n", hva);
-		goto mmio;
-	}
+	if (kvm_write_guest(vcpu->kvm, pte.raddr, ptr, size))
+		return EMULATE_DO_MMIO;
 
 	return EMULATE_DONE;
-
-nopte:
-	return -ENOENT;
-mmio:
-	return EMULATE_DO_MMIO;
 }
 
 int kvmppc_ld(struct kvm_vcpu *vcpu, ulong *eaddr, int size, void *ptr,
@@ -786,6 +773,7 @@ int kvmppc_handle_exit(struct kvm_run *run, struct kvm_vcpu *vcpu,
 			 *     that no guest that needs the dcbz hack does NX.
 			 */
 			kvmppc_mmu_pte_flush(vcpu, vcpu->arch.pc, ~0xFFFULL);
+			r = RESUME_GUEST;
 		} else {
 			vcpu->arch.msr |= vcpu->arch.shadow_srr1 & 0x58000000;
 			kvmppc_book3s_queue_irqprio(vcpu, exit_nr);
diff --git a/arch/powerpc/kvm/book3s_64_emulate.c b/arch/powerpc/kvm/book3s_64_emulate.c
index 1e5cf8d..bbd1590 100644
--- a/arch/powerpc/kvm/book3s_64_emulate.c
+++ b/arch/powerpc/kvm/book3s_64_emulate.c
@@ -189,6 +189,8 @@ int kvmppc_core_emulate_op(struct kvm_run *run, struct kvm_vcpu *vcpu,
 			ulong ra = 0;
 			ulong addr, vaddr;
 			u32 zeros[8] = { 0, 0, 0, 0, 0, 0, 0, 0 };
+			u32 dsisr;
+			int r;
 
 			if (get_ra(inst))
 				ra = kvmppc_get_gpr(vcpu, get_ra(inst));
@@ -198,14 +200,23 @@ int kvmppc_core_emulate_op(struct kvm_run *run, struct kvm_vcpu *vcpu,
 				addr &= 0xffffffff;
 			vaddr = addr;
 
-			if (kvmppc_st(vcpu, &addr, 32, zeros, true)) {
+			r = kvmppc_st(vcpu, &addr, 32, zeros, true);
+			if ((r = -ENOENT) || (r = -EPERM)) {
+				*advance = 0;
 				vcpu->arch.dear = vaddr;
 				vcpu->arch.fault_dear = vaddr;
-				to_book3s(vcpu)->dsisr = DSISR_PROTFAULT |
-						      DSISR_ISSTORE;
+
+				dsisr = DSISR_ISSTORE;
+				if (r = -ENOENT)
+					dsisr |= DSISR_NOHPTE;
+				else if (r = -EPERM)
+					dsisr |= DSISR_PROTFAULT;
+
+				to_book3s(vcpu)->dsisr = dsisr;
+				vcpu->arch.fault_dsisr = dsisr;
+
 				kvmppc_book3s_queue_irqprio(vcpu,
 					BOOK3S_INTERRUPT_DATA_STORAGE);
-				kvmppc_mmu_pte_flush(vcpu, vaddr, ~0xFFFULL);
 			}
 
 			break;
-- 
1.6.0.2

[PATCH 16/21] KVM: PPC: Fix dcbz emulation

[Alexander Graf]

On most systems we need to emulate dcbz when running 32 bit guests. So
far we've been rather slack, not giving correct DSISR values to the guest.

This patch makes the emulation more accurate, introducing a difference
between "page not mapped" and "write protection fault". While at it, it
also speeds up dcbz emulation by an order of magnitude by using kmap.

Signed-off-by: Alexander Graf <agraf@suse.de>
---
 arch/powerpc/kvm/book3s.c            |   56 +++++++++++++--------------------
 arch/powerpc/kvm/book3s_64_emulate.c |   19 +++++++++--
 2 files changed, 37 insertions(+), 38 deletions(-)

diff --git a/arch/powerpc/kvm/book3s.c b/arch/powerpc/kvm/book3s.c
index 7912d72..1a12ef2 100644
--- a/arch/powerpc/kvm/book3s.c
+++ b/arch/powerpc/kvm/book3s.c
@@ -28,6 +28,7 @@
 #include <asm/mmu_context.h>
 #include <linux/sched.h>
 #include <linux/vmalloc.h>
+#include <linux/highmem.h>
 
 #define VCPU_STAT(x) offsetof(struct kvm_vcpu, stat.x), KVM_STAT_VCPU
 
@@ -368,34 +369,29 @@ void kvmppc_set_pvr(struct kvm_vcpu *vcpu, u32 pvr)
  */
 static void kvmppc_patch_dcbz(struct kvm_vcpu *vcpu, struct kvmppc_pte *pte)
 {
-	bool touched = false;
-	hva_t hpage;
+	struct page *hpage;
+	u64 hpage_offset;
 	u32 *page;
 	int i;
 
-	hpage = gfn_to_hva(vcpu->kvm, pte->raddr >> PAGE_SHIFT);
-	if (kvm_is_error_hva(hpage))
+	hpage = gfn_to_page(vcpu->kvm, pte->raddr >> PAGE_SHIFT);
+	if (is_error_page(hpage))
 		return;
 
-	hpage |= pte->raddr & ~PAGE_MASK;
-	hpage &= ~0xFFFULL;
-
-	page = vmalloc(HW_PAGE_SIZE);
-
-	if (copy_from_user(page, (void __user *)hpage, HW_PAGE_SIZE))
-		goto out;
+	hpage_offset = pte->raddr & ~PAGE_MASK;
+	hpage_offset &= ~0xFFFULL;
+	hpage_offset /= 4;
 
-	for (i=0; i < HW_PAGE_SIZE / 4; i++)
-		if ((page[i] & 0xff0007ff) == INS_DCBZ) {
-			page[i] &= 0xfffffff7; // reserved instruction, so we trap
-			touched = true;
-		}
+	get_page(hpage);
+	page = kmap_atomic(hpage, KM_USER0);
 
-	if (touched)
-		copy_to_user((void __user *)hpage, page, HW_PAGE_SIZE);
+	/* patch dcbz into reserved instruction, so we trap */
+	for (i=hpage_offset; i < hpage_offset + (HW_PAGE_SIZE / 4); i++)
+		if ((page[i] & 0xff0007ff) == INS_DCBZ)
+			page[i] &= 0xfffffff7;
 
-out:
-	vfree(page);
+	kunmap_atomic(page, KM_USER0);
+	put_page(hpage);
 }
 
 static int kvmppc_xlate(struct kvm_vcpu *vcpu, ulong eaddr, bool data,
@@ -448,30 +444,21 @@ int kvmppc_st(struct kvm_vcpu *vcpu, ulong *eaddr, int size, void *ptr,
 	      bool data)
 {
 	struct kvmppc_pte pte;
-	hva_t hva = *eaddr;
 
 	vcpu->stat.st++;
 
 	if (kvmppc_xlate(vcpu, *eaddr, data, &pte))
-		goto nopte;
+		return -ENOENT;
 
 	*eaddr = pte.raddr;
 
-	hva = kvmppc_pte_to_hva(vcpu, &pte, false);
-	if (kvm_is_error_hva(hva))
-		goto mmio;
+	if (!pte.may_write)
+		return -EPERM;
 
-	if (copy_to_user((void __user *)hva, ptr, size)) {
-		printk(KERN_INFO "kvmppc_st at 0x%lx failed\n", hva);
-		goto mmio;
-	}
+	if (kvm_write_guest(vcpu->kvm, pte.raddr, ptr, size))
+		return EMULATE_DO_MMIO;
 
 	return EMULATE_DONE;
-
-nopte:
-	return -ENOENT;
-mmio:
-	return EMULATE_DO_MMIO;
 }
 
 int kvmppc_ld(struct kvm_vcpu *vcpu, ulong *eaddr, int size, void *ptr,
@@ -786,6 +773,7 @@ int kvmppc_handle_exit(struct kvm_run *run, struct kvm_vcpu *vcpu,
 			 *     that no guest that needs the dcbz hack does NX.
 			 */
 			kvmppc_mmu_pte_flush(vcpu, vcpu->arch.pc, ~0xFFFULL);
+			r = RESUME_GUEST;
 		} else {
 			vcpu->arch.msr |= vcpu->arch.shadow_srr1 & 0x58000000;
 			kvmppc_book3s_queue_irqprio(vcpu, exit_nr);
diff --git a/arch/powerpc/kvm/book3s_64_emulate.c b/arch/powerpc/kvm/book3s_64_emulate.c
index 1e5cf8d..bbd1590 100644
--- a/arch/powerpc/kvm/book3s_64_emulate.c
+++ b/arch/powerpc/kvm/book3s_64_emulate.c
@@ -189,6 +189,8 @@ int kvmppc_core_emulate_op(struct kvm_run *run, struct kvm_vcpu *vcpu,
 			ulong ra = 0;
 			ulong addr, vaddr;
 			u32 zeros[8] = { 0, 0, 0, 0, 0, 0, 0, 0 };
+			u32 dsisr;
+			int r;
 
 			if (get_ra(inst))
 				ra = kvmppc_get_gpr(vcpu, get_ra(inst));
@@ -198,14 +200,23 @@ int kvmppc_core_emulate_op(struct kvm_run *run, struct kvm_vcpu *vcpu,
 				addr &= 0xffffffff;
 			vaddr = addr;
 
-			if (kvmppc_st(vcpu, &addr, 32, zeros, true)) {
+			r = kvmppc_st(vcpu, &addr, 32, zeros, true);
+			if ((r == -ENOENT) || (r == -EPERM)) {
+				*advance = 0;
 				vcpu->arch.dear = vaddr;
 				vcpu->arch.fault_dear = vaddr;
-				to_book3s(vcpu)->dsisr = DSISR_PROTFAULT |
-						      DSISR_ISSTORE;
+
+				dsisr = DSISR_ISSTORE;
+				if (r == -ENOENT)
+					dsisr |= DSISR_NOHPTE;
+				else if (r == -EPERM)
+					dsisr |= DSISR_PROTFAULT;
+
+				to_book3s(vcpu)->dsisr = dsisr;
+				vcpu->arch.fault_dsisr = dsisr;
+
 				kvmppc_book3s_queue_irqprio(vcpu,
 					BOOK3S_INTERRUPT_DATA_STORAGE);
-				kvmppc_mmu_pte_flush(vcpu, vaddr, ~0xFFFULL);
 			}
 
 			break;
-- 
1.6.0.2

[PATCH 17/21] KVM: PPC: Add emulation for dcba

[Alexander Graf]

Mac OS X uses the dcba instruction. According to the specification it doesn't
guarantee any functionality, so let's just emulate it as nop.

Signed-off-by: Alexander Graf <agraf@suse.de>
---
 arch/powerpc/kvm/book3s_64_emulate.c |    4 ++++
 1 files changed, 4 insertions(+), 0 deletions(-)

diff --git a/arch/powerpc/kvm/book3s_64_emulate.c b/arch/powerpc/kvm/book3s_64_emulate.c
index bbd1590..8f50776 100644
--- a/arch/powerpc/kvm/book3s_64_emulate.c
+++ b/arch/powerpc/kvm/book3s_64_emulate.c
@@ -37,6 +37,7 @@
 #define OP_31_XOP_SLBIA		498
 #define OP_31_XOP_MFSR		595
 #define OP_31_XOP_MFSRIN	659
+#define OP_31_XOP_DCBA		758
 #define OP_31_XOP_SLBMFEV	851
 #define OP_31_XOP_EIOIO		854
 #define OP_31_XOP_SLBMFEE	915
@@ -183,6 +184,9 @@ int kvmppc_core_emulate_op(struct kvm_run *run, struct kvm_vcpu *vcpu,
 				kvmppc_set_gpr(vcpu, get_rt(inst), t);
 			}
 			break;
+		case OP_31_XOP_DCBA:
+			/* Gets treated as NOP */
+			break;
 		case OP_31_XOP_DCBZ:
 		{
 			ulong rb = kvmppc_get_gpr(vcpu, get_rb(inst));
-- 
1.6.0.2

[PATCH 17/21] KVM: PPC: Add emulation for dcba

[Alexander Graf]

Mac OS X uses the dcba instruction. According to the specification it doesn't
guarantee any functionality, so let's just emulate it as nop.

Signed-off-by: Alexander Graf <agraf@suse.de>
---
 arch/powerpc/kvm/book3s_64_emulate.c |    4 ++++
 1 files changed, 4 insertions(+), 0 deletions(-)

diff --git a/arch/powerpc/kvm/book3s_64_emulate.c b/arch/powerpc/kvm/book3s_64_emulate.c
index bbd1590..8f50776 100644
--- a/arch/powerpc/kvm/book3s_64_emulate.c
+++ b/arch/powerpc/kvm/book3s_64_emulate.c
@@ -37,6 +37,7 @@
 #define OP_31_XOP_SLBIA		498
 #define OP_31_XOP_MFSR		595
 #define OP_31_XOP_MFSRIN	659
+#define OP_31_XOP_DCBA		758
 #define OP_31_XOP_SLBMFEV	851
 #define OP_31_XOP_EIOIO		854
 #define OP_31_XOP_SLBMFEE	915
@@ -183,6 +184,9 @@ int kvmppc_core_emulate_op(struct kvm_run *run, struct kvm_vcpu *vcpu,
 				kvmppc_set_gpr(vcpu, get_rt(inst), t);
 			}
 			break;
+		case OP_31_XOP_DCBA:
+			/* Gets treated as NOP */
+			break;
 		case OP_31_XOP_DCBZ:
 		{
 			ulong rb = kvmppc_get_gpr(vcpu, get_rb(inst));
-- 
1.6.0.2

[PATCH 18/21] KVM: PPC: Add check if pte was mapped secondary

[Alexander Graf]

Some HTAB providers (namely the PS3) ignore the SECONDARY flag. They
just put an entry in the htab as secondary when they see fit.

So we need to check the return value of htab_insert to remember the
correct slot id so we can actually invalidate the entry again.

Fixes KVM on the PS3.

Signed-off-by: Alexander Graf <agraf@suse.de>
---
 arch/powerpc/kvm/book3s_64_mmu_host.c |    7 +++++++
 1 files changed, 7 insertions(+), 0 deletions(-)

diff --git a/arch/powerpc/kvm/book3s_64_mmu_host.c b/arch/powerpc/kvm/book3s_64_mmu_host.c
index 25bd4ed..a01e9c5 100644
--- a/arch/powerpc/kvm/book3s_64_mmu_host.c
+++ b/arch/powerpc/kvm/book3s_64_mmu_host.c
@@ -270,6 +270,13 @@ map_again:
 			    (rflags & HPTE_R_N) ? '-' : 'x',
 			    orig_pte->eaddr, hpteg, va, orig_pte->vpage, hpaddr);
 
+		/* The ppc_md code may give us a secondary entry even though we
+		   asked for a primary. Fix up. */
+		if ((ret & _PTEIDX_SECONDARY) && !(vflags & HPTE_V_SECONDARY)) {
+			hash = ~hash;
+			hpteg = ((hash & htab_hash_mask) * HPTES_PER_GROUP);
+		}
+
 		pte->slot = hpteg + (ret & 7);
 		pte->host_va = va;
 		pte->pte = *orig_pte;
-- 
1.6.0.2

[PATCH 18/21] KVM: PPC: Add check if pte was mapped secondary

[Alexander Graf]

Some HTAB providers (namely the PS3) ignore the SECONDARY flag. They
just put an entry in the htab as secondary when they see fit.

So we need to check the return value of htab_insert to remember the
correct slot id so we can actually invalidate the entry again.

Fixes KVM on the PS3.

Signed-off-by: Alexander Graf <agraf@suse.de>
---
 arch/powerpc/kvm/book3s_64_mmu_host.c |    7 +++++++
 1 files changed, 7 insertions(+), 0 deletions(-)

diff --git a/arch/powerpc/kvm/book3s_64_mmu_host.c b/arch/powerpc/kvm/book3s_64_mmu_host.c
index 25bd4ed..a01e9c5 100644
--- a/arch/powerpc/kvm/book3s_64_mmu_host.c
+++ b/arch/powerpc/kvm/book3s_64_mmu_host.c
@@ -270,6 +270,13 @@ map_again:
 			    (rflags & HPTE_R_N) ? '-' : 'x',
 			    orig_pte->eaddr, hpteg, va, orig_pte->vpage, hpaddr);
 
+		/* The ppc_md code may give us a secondary entry even though we
+		   asked for a primary. Fix up. */
+		if ((ret & _PTEIDX_SECONDARY) && !(vflags & HPTE_V_SECONDARY)) {
+			hash = ~hash;
+			hpteg = ((hash & htab_hash_mask) * HPTES_PER_GROUP);
+		}
+
 		pte->slot = hpteg + (ret & 7);
 		pte->host_va = va;
 		pte->pte = *orig_pte;
-- 
1.6.0.2

[PATCH 19/21] KVM: PPC: Use ULL for big numbers

[Alexander Graf]

Some constants were bigger than ints. Let's mark them as such so we don't
accidently truncate them.

Signed-off-by: Alexander Graf <agraf@suse.de>
---
 arch/powerpc/include/asm/kvm_book3s.h |   12 ++++++------
 1 files changed, 6 insertions(+), 6 deletions(-)

diff --git a/arch/powerpc/include/asm/kvm_book3s.h b/arch/powerpc/include/asm/kvm_book3s.h
index 7e243b2..8a6b4c5 100644
--- a/arch/powerpc/include/asm/kvm_book3s.h
+++ b/arch/powerpc/include/asm/kvm_book3s.h
@@ -100,12 +100,12 @@ struct kvmppc_vcpu_book3s {
 #define CONTEXT_GUEST		1
 #define CONTEXT_GUEST_END	2
 
-#define VSID_REAL_DR	0x7ffffffffff00000
-#define VSID_REAL_IR	0x7fffffffffe00000
-#define VSID_SPLIT_MASK	0x7fffffffffe00000
-#define VSID_REAL	0x7fffffffffc00000
-#define VSID_BAT	0x7fffffffffb00000
-#define VSID_PR		0x8000000000000000
+#define VSID_REAL_DR	0x7ffffffffff00000ULL
+#define VSID_REAL_IR	0x7fffffffffe00000ULL
+#define VSID_SPLIT_MASK	0x7fffffffffe00000ULL
+#define VSID_REAL	0x7fffffffffc00000ULL
+#define VSID_BAT	0x7fffffffffb00000ULL
+#define VSID_PR		0x8000000000000000ULL
 
 extern void kvmppc_mmu_pte_flush(struct kvm_vcpu *vcpu, u64 ea, u64 ea_mask);
 extern void kvmppc_mmu_pte_vflush(struct kvm_vcpu *vcpu, u64 vp, u64 vp_mask);
-- 
1.6.0.2

[PATCH 19/21] KVM: PPC: Use ULL for big numbers

[Alexander Graf]

Some constants were bigger than ints. Let's mark them as such so we don't
accidently truncate them.

Signed-off-by: Alexander Graf <agraf@suse.de>
---
 arch/powerpc/include/asm/kvm_book3s.h |   12 ++++++------
 1 files changed, 6 insertions(+), 6 deletions(-)

diff --git a/arch/powerpc/include/asm/kvm_book3s.h b/arch/powerpc/include/asm/kvm_book3s.h
index 7e243b2..8a6b4c5 100644
--- a/arch/powerpc/include/asm/kvm_book3s.h
+++ b/arch/powerpc/include/asm/kvm_book3s.h
@@ -100,12 +100,12 @@ struct kvmppc_vcpu_book3s {
 #define CONTEXT_GUEST		1
 #define CONTEXT_GUEST_END	2
 
-#define VSID_REAL_DR	0x7ffffffffff00000
-#define VSID_REAL_IR	0x7fffffffffe00000
-#define VSID_SPLIT_MASK	0x7fffffffffe00000
-#define VSID_REAL	0x7fffffffffc00000
-#define VSID_BAT	0x7fffffffffb00000
-#define VSID_PR		0x8000000000000000
+#define VSID_REAL_DR	0x7ffffffffff00000ULL
+#define VSID_REAL_IR	0x7fffffffffe00000ULL
+#define VSID_SPLIT_MASK	0x7fffffffffe00000ULL
+#define VSID_REAL	0x7fffffffffc00000ULL
+#define VSID_BAT	0x7fffffffffb00000ULL
+#define VSID_PR		0x8000000000000000ULL
 
 extern void kvmppc_mmu_pte_flush(struct kvm_vcpu *vcpu, u64 ea, u64 ea_mask);
 extern void kvmppc_mmu_pte_vflush(struct kvm_vcpu *vcpu, u64 vp, u64 vp_mask);
-- 
1.6.0.2