* New DMAR errors in Xen 4.1
@ 2010-04-06 22:38 Jeremy Fitzhardinge
2010-04-07 0:00 ` Jeremy Fitzhardinge
0 siblings, 1 reply; 7+ messages in thread
From: Jeremy Fitzhardinge @ 2010-04-06 22:38 UTC (permalink / raw)
To: Keir Fraser; +Cc: Xen-devel
I'm seeing DMAR errors with current Xen-unstable, which weren't there in
-rc8 (-rc9?):
type=1403 audit(1270593095.214:3): policy loaded auid=4294967295 ses=4294967295
(XEN) [VT-D]iommu.c:821: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:796: DMAR:[DMA Write] Request device [00:1f.2] fault addr bf57b000, iommu reg = ffff82c3fff57000
(XEN) DMAR:[fault reason 05h] PTE Write access is not set
(XEN) print_vtd_entries: iommu = ffff83013fff3e80 bdf = 0:1f.2 gmfn = bf57b
(XEN) root_entry = ffff83013ff36000
(XEN) root_entry[0] = 13c6bb001
(XEN) context = ffff83013c6bb000
(XEN) context[fa] = 2_13fec4001
(XEN) l4 = ffff83013fec4000
(XEN) l4_index = 0
(XEN) l4[0] = 13fec1003
(XEN) l3 = ffff83013fec1000
(XEN) l3_index = 2
(XEN) l3[2] = 13ccbe003
(XEN) l2 = ffff83013ccbe000
(XEN) l2_index = 1fa
(XEN) l2[1fa] = 13cac3003
(XEN) l1 = ffff83013cac3000
(XEN) l1_index = 17b
(XEN) l1[17b] = 0
(XEN) l1[17b] not present
(XEN) [VT-D]iommu.c:796: DMAR:[DMA Write] Request device [00:1f.2] fault addr bf57a000, iommu reg = ffff82c3fff57000
(XEN) DMAR:[fault reason 05h] PTE Write access is not set
(XEN) print_vtd_entries: iommu = ffff83013fff3e80 bdf = 0:1f.2 gmfn = bf57a
(XEN) root_entry = ffff83013ff36000
(XEN) root_entry[0] = 13c6bb001
(XEN) context = ffff83013c6bb000
(XEN) context[fa] = 2_13fec4001
(XEN) l4 = ffff83013fec4000
(XEN) l4_index = 0
(XEN) l4[0] = 13fec1003
(XEN) l3 = ffff83013fec1000
(XEN) l3_index = 2
(XEN) l3[2] = 13ccbe003
(XEN) l2 = ffff83013ccbe000
(XEN) l2_index = 1fa
(XEN) l2[1fa] = 13cac3003
(XEN) l1 = ffff83013cac3000
(XEN) l1_index = 17a
(XEN) l1[17a] = 0
(XEN) l1[17a] not present
Device 0:1f.2 is my SATA controller. I haven't tried bisecting it or
anything yet; I don't see any recent changes which are obviously
relevant though.
J
^ permalink raw reply [flat|nested] 7+ messages in thread* Re: New DMAR errors in Xen 4.1 2010-04-06 22:38 New DMAR errors in Xen 4.1 Jeremy Fitzhardinge @ 2010-04-07 0:00 ` Jeremy Fitzhardinge 2010-04-07 2:50 ` Weidong Han 0 siblings, 1 reply; 7+ messages in thread From: Jeremy Fitzhardinge @ 2010-04-07 0:00 UTC (permalink / raw) To: Keir Fraser; +Cc: Xen-devel On 04/06/2010 03:38 PM, Jeremy Fitzhardinge wrote: > I'm seeing DMAR errors with current Xen-unstable, which weren't there > in -rc8 (-rc9?): > > type=1403 audit(1270593095.214:3): policy loaded auid=4294967295 > ses=4294967295 > (XEN) [VT-D]iommu.c:821: iommu_fault_status: Primary Pending Fault > (XEN) [VT-D]iommu.c:796: DMAR:[DMA Write] Request device [00:1f.2] > fault addr bf57b000, iommu reg = ffff82c3fff57000 > (XEN) DMAR:[fault reason 05h] PTE Write access is not set > (XEN) print_vtd_entries: iommu = ffff83013fff3e80 bdf = 0:1f.2 gmfn = > bf57b > (XEN) root_entry = ffff83013ff36000 > (XEN) root_entry[0] = 13c6bb001 > (XEN) context = ffff83013c6bb000 > (XEN) context[fa] = 2_13fec4001 > (XEN) l4 = ffff83013fec4000 > (XEN) l4_index = 0 > (XEN) l4[0] = 13fec1003 > (XEN) l3 = ffff83013fec1000 > (XEN) l3_index = 2 > (XEN) l3[2] = 13ccbe003 > (XEN) l2 = ffff83013ccbe000 > (XEN) l2_index = 1fa > (XEN) l2[1fa] = 13cac3003 > (XEN) l1 = ffff83013cac3000 > (XEN) l1_index = 17b > (XEN) l1[17b] = 0 > (XEN) l1[17b] not present > (XEN) [VT-D]iommu.c:796: DMAR:[DMA Write] Request device [00:1f.2] > fault addr bf57a000, iommu reg = ffff82c3fff57000 > (XEN) DMAR:[fault reason 05h] PTE Write access is not set > (XEN) print_vtd_entries: iommu = ffff83013fff3e80 bdf = 0:1f.2 gmfn = > bf57a > (XEN) root_entry = ffff83013ff36000 > (XEN) root_entry[0] = 13c6bb001 > (XEN) context = ffff83013c6bb000 > (XEN) context[fa] = 2_13fec4001 > (XEN) l4 = ffff83013fec4000 > (XEN) l4_index = 0 > (XEN) l4[0] = 13fec1003 > (XEN) l3 = ffff83013fec1000 > (XEN) l3_index = 2 > (XEN) l3[2] = 13ccbe003 > (XEN) l2 = ffff83013ccbe000 > (XEN) l2_index = 1fa > (XEN) l2[1fa] = 13cac3003 > (XEN) l1 = ffff83013cac3000 > (XEN) l1_index = 17a > (XEN) l1[17a] = 0 > (XEN) l1[17a] not present > > > > Device 0:1f.2 is my SATA controller. I haven't tried bisecting it or > anything yet; I don't see any recent changes which are obviously > relevant though. It turns out its... "Enable debug=y by default in the build." So I guess these errors have been happening silently thus far? J ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: New DMAR errors in Xen 4.1 2010-04-07 0:00 ` Jeremy Fitzhardinge @ 2010-04-07 2:50 ` Weidong Han 2010-04-07 8:31 ` Cui, Dexuan 2010-04-07 16:55 ` Jeremy Fitzhardinge 0 siblings, 2 replies; 7+ messages in thread From: Weidong Han @ 2010-04-07 2:50 UTC (permalink / raw) To: Jeremy Fitzhardinge; +Cc: Xen-devel, Keir Fraser Jeremy Fitzhardinge wrote: > On 04/06/2010 03:38 PM, Jeremy Fitzhardinge wrote: > >> I'm seeing DMAR errors with current Xen-unstable, which weren't there >> in -rc8 (-rc9?): >> >> type=1403 audit(1270593095.214:3): policy loaded auid=4294967295 >> ses=4294967295 >> (XEN) [VT-D]iommu.c:821: iommu_fault_status: Primary Pending Fault >> (XEN) [VT-D]iommu.c:796: DMAR:[DMA Write] Request device [00:1f.2] >> fault addr bf57b000, iommu reg = ffff82c3fff57000 >> (XEN) DMAR:[fault reason 05h] PTE Write access is not set >> (XEN) print_vtd_entries: iommu = ffff83013fff3e80 bdf = 0:1f.2 gmfn = >> bf57b >> (XEN) root_entry = ffff83013ff36000 >> (XEN) root_entry[0] = 13c6bb001 >> (XEN) context = ffff83013c6bb000 >> (XEN) context[fa] = 2_13fec4001 >> (XEN) l4 = ffff83013fec4000 >> (XEN) l4_index = 0 >> (XEN) l4[0] = 13fec1003 >> (XEN) l3 = ffff83013fec1000 >> (XEN) l3_index = 2 >> (XEN) l3[2] = 13ccbe003 >> (XEN) l2 = ffff83013ccbe000 >> (XEN) l2_index = 1fa >> (XEN) l2[1fa] = 13cac3003 >> (XEN) l1 = ffff83013cac3000 >> (XEN) l1_index = 17b >> (XEN) l1[17b] = 0 >> (XEN) l1[17b] not present >> (XEN) [VT-D]iommu.c:796: DMAR:[DMA Write] Request device [00:1f.2] >> fault addr bf57a000, iommu reg = ffff82c3fff57000 >> (XEN) DMAR:[fault reason 05h] PTE Write access is not set >> (XEN) print_vtd_entries: iommu = ffff83013fff3e80 bdf = 0:1f.2 gmfn = >> bf57a >> (XEN) root_entry = ffff83013ff36000 >> (XEN) root_entry[0] = 13c6bb001 >> (XEN) context = ffff83013c6bb000 >> (XEN) context[fa] = 2_13fec4001 >> (XEN) l4 = ffff83013fec4000 >> (XEN) l4_index = 0 >> (XEN) l4[0] = 13fec1003 >> (XEN) l3 = ffff83013fec1000 >> (XEN) l3_index = 2 >> (XEN) l3[2] = 13ccbe003 >> (XEN) l2 = ffff83013ccbe000 >> (XEN) l2_index = 1fa >> (XEN) l2[1fa] = 13cac3003 >> (XEN) l1 = ffff83013cac3000 >> (XEN) l1_index = 17a >> (XEN) l1[17a] = 0 >> (XEN) l1[17a] not present >> >> >> >> Device 0:1f.2 is my SATA controller. I haven't tried bisecting it or >> anything yet; I don't see any recent changes which are obviously >> relevant though. >> > > It turns out its... "Enable debug=y by default in the build." So I > guess these errors have been happening silently thus far? > > J > I don't encounter this issue. These DMAR fault messages will be printed even when debug=n. what platform are you using? could you post complete booting log with "iommu=verbose"? Regards, Weidong ^ permalink raw reply [flat|nested] 7+ messages in thread
* RE: New DMAR errors in Xen 4.1 2010-04-07 2:50 ` Weidong Han @ 2010-04-07 8:31 ` Cui, Dexuan 2010-04-07 16:55 ` Jeremy Fitzhardinge 1 sibling, 0 replies; 7+ messages in thread From: Cui, Dexuan @ 2010-04-07 8:31 UTC (permalink / raw) To: Han, Weidong, Jeremy Fitzhardinge; +Cc: Xen-devel, Keir Fraser Weidong Han wrote: > Jeremy Fitzhardinge wrote: >> On 04/06/2010 03:38 PM, Jeremy Fitzhardinge wrote: >> >>> I'm seeing DMAR errors with current Xen-unstable, which weren't >>> there in -rc8 (-rc9?): >>> ... >>> >>> Device 0:1f.2 is my SATA controller. I haven't tried bisecting it >>> or anything yet; I don't see any recent changes which are obviously >>> relevant though. >>> >> >> It turns out its... "Enable debug=y by default in the build." So I >> guess these errors have been happening silently thus far? >> >> J >> > I don't encounter this issue. These DMAR fault messages will be > printed even when debug=n. what platform are you using? could you > post complete booting log with "iommu=verbose"? Hi Jeremy, My first thought is: the checking of the 2 "if" statements in iommu_set_dom0_mapping() might be buggy. Please comment them out to see if the error messages will disappear -- if the msgs do disappear, we need to find out why the checking causes the issue. Thanks, -- Dexuan ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: New DMAR errors in Xen 4.1 2010-04-07 2:50 ` Weidong Han 2010-04-07 8:31 ` Cui, Dexuan @ 2010-04-07 16:55 ` Jeremy Fitzhardinge 2010-04-08 2:32 ` Weidong Han 1 sibling, 1 reply; 7+ messages in thread From: Jeremy Fitzhardinge @ 2010-04-07 16:55 UTC (permalink / raw) To: Weidong Han; +Cc: Xen-devel, Keir Fraser On 04/06/2010 07:50 PM, Weidong Han wrote: >> It turns out its... "Enable debug=y by default in the build." So I >> guess these errors have been happening silently thus far? >> >> J > > I don't encounter this issue. These DMAR fault messages will be > printed even when debug=n. what platform are you using? could you post > complete booting log with "iommu=verbose"? This is a Supermicro X8SIL-F system, which is a Lynnfield + Ibex Peak system. I've attached two boot logs below. The first is one where there lots of DMAR errors early, and the system is a disaster (basically doesn't come up, lots of devices fail to init). Unfortunately it looks like I mistyped "verbose". The second boot was immediately after the first and it comes up cleanly with no DMAR errors at all. So it appears there's some non-determinism there. The gmfns in the messages always appear to be about he same, so I wonder if it depends on exactly what pages the kernel ends up allocating for IO? (It probably also means my bisection results are suspect.) (BTW, what's a "type 9" E820 region?) Thanks, J __ __ _ _ _ _ _ _ \ \/ /___ _ __ | || | / | _ _ _ __ ___| |_ __ _| |__ | | ___ \ // _ \ '_ \ | || |_ | |__| | | | '_ \/ __| __/ _` | '_ \| |/ _ \ / \ __/ | | | |__ _|| |__| |_| | | | \__ \ || (_| | |_) | | __/ /_/\_\___|_| |_| |_|(_)_| \__,_|_| |_|___/\__\__,_|_.__/|_|\___| (XEN) Xen version 4.1-unstable (jeremy@) (gcc version 4.4.3 20100127 (Red Hat 4.4.3-4) (GCC) ) Tue Apr 6 17:23:29 PDT 2010 (XEN) Latest ChangeSet: Tue Apr 06 17:23:12 2010 -0700 21115:ea6c67dc4577 (XEN) Command line: com2=115200,8n1,0x3e8,5 console=com2,vga cpufreq=xen iommu=verbos8 (XEN) Video information: (XEN) VGA is text mode 80x25, font 8x16 (XEN) VBE/DDC methods: none; EDID transfer time: 0 seconds (XEN) EDID info not retrieved because no DDC retrieval method detected (XEN) Disc information: (XEN) Found 4 MBR signatures (XEN) Found 4 EDD information structures (XEN) Xen-e820 RAM map: (XEN) 0000000000000000 - 000000000009d800 (usable) (XEN) 000000000009d800 - 00000000000a0000 (reserved) (XEN) 00000000000e0000 - 0000000000100000 (reserved) (XEN) 0000000000100000 - 00000000bf790000 (usable) (XEN) 00000000bf79e000 - 00000000bf7a0000 type 9 (XEN) 00000000bf7a0000 - 00000000bf7ae000 (ACPI data) (XEN) 00000000bf7ae000 - 00000000bf7d0000 (ACPI NVS) (XEN) 00000000bf7d0000 - 00000000bf7e0000 (reserved) (XEN) 00000000bf7ed000 - 00000000c0000000 (reserved) (XEN) 00000000e0000000 - 00000000f0000000 (reserved) (XEN) 00000000fed20000 - 00000000fed40000 (reserved) (XEN) 00000000fee00000 - 00000000fee01000 (reserved) (XEN) 0000000100000000 - 0000000140000000 (usable) (XEN) ACPI: RSDP 000FA110, 0024 (r2 ACPIAM) (XEN) ACPI: XSDT BF7A0100, 0084 (r1 SMCI 20100225 MSFT 97) (XEN) ACPI: FACP BF7A0290, 00F4 (r4 022510 FACP1918 20100225 MSFT 97) (XEN) ACPI: DSDT BF7A05F0, 6C55 (r2 10605 10605000 0 INTL 20051117) (XEN) ACPI: FACS BF7AE000, 0040 (XEN) ACPI: APIC BF7A0390, 0092 (r2 022510 APIC1918 20100225 MSFT 97) (XEN) ACPI: MCFG BF7A0430, 003C (r1 022510 OEMMCFG 20100225 MSFT 97) (XEN) ACPI: OEMB BF7AE040, 0073 (r1 022510 OEMB1918 20100225 MSFT 97) (XEN) ACPI: HPET BF7AA5F0, 0038 (r1 022510 OEMHPET 20100225 MSFT 97) (XEN) ACPI: GSCI BF7AE0C0, 2024 (r1 022510 GMCHSCI 20100225 MSFT 97) (XEN) ACPI: DMAR BF7B00F0, 0090 (r1 AMI OEMDMAR 1 MSFT 97) (XEN) ACPI: SSDT BF7B1580, 0363 (r1 DpgPmm CpuPm 12 INTL 20051117) (XEN) ACPI: EINJ BF7AA630, 0130 (r1 AMIER AMI_EINJ 20100225 MSFT 97) (XEN) ACPI: BERT BF7AA7C0, 0030 (r1 AMIER AMI_BERT 20100225 MSFT 97) (XEN) ACPI: ERST BF7AA7F0, 01B0 (r1 AMIER AMI_ERST 20100225 MSFT 97) (XEN) ACPI: HEST BF7AA9A0, 00A8 (r1 AMIER ABC_HEST 20100225 MSFT 97) (XEN) System RAM: 4056MB (4153584kB) (XEN) No NUMA configuration found (XEN) Faking a node at 0000000000000000-0000000140000000 (XEN) Domain heap initialised (XEN) found SMP MP-table at 000ff780 (XEN) DMI present. (XEN) Using APIC driver default (XEN) ACPI: PM-Timer IO Port: 0x808 (XEN) ACPI: ACPI SLEEP INFO: pm1x_cnt[804,0], pm1x_evt[800,0] (XEN) ACPI: wakeup_vec[bf7ae00c], vec_size[20] (XEN) ACPI: Local APIC address 0xfee00000 (XEN) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) (XEN) Processor #0 7:14 APIC version 21 (XEN) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) (XEN) Processor #2 7:14 APIC version 21 (XEN) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled) (XEN) Processor #4 7:14 APIC version 21 (XEN) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled) (XEN) Processor #6 7:14 APIC version 21 (XEN) ACPI: LAPIC (acpi_id[0x05] lapic_id[0x84] disabled) (XEN) ACPI: LAPIC (acpi_id[0x06] lapic_id[0x85] disabled) (XEN) ACPI: LAPIC (acpi_id[0x07] lapic_id[0x86] disabled) (XEN) ACPI: LAPIC (acpi_id[0x08] lapic_id[0x87] disabled) (XEN) ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) (XEN) ACPI: IOAPIC (id[0x07] address[0xfec00000] gsi_base[0]) (XEN) IOAPIC[0]: apic_id 7, version 32, address 0xfec00000, GSI 0-23 (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) (XEN) ACPI: IRQ0 used by override. (XEN) ACPI: IRQ2 used by override. (XEN) ACPI: IRQ9 used by override. (XEN) Enabling APIC mode: Flat. Using 1 I/O APICs (XEN) ACPI: HPET id: 0x8086a701 base: 0xfed00000 (XEN) PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 (XEN) PCI: MCFG area at e0000000 reserved in E820 (XEN) Using ACPI (MADT) for SMP configuration information (XEN) Using scheduler: SMP Credit Scheduler (credit) (XEN) Detected 2400.067 MHz processor. (XEN) Initing memory sharing. (XEN) EPT support 2M super page. (XEN) VMX: Supported advanced features: (XEN) - APIC MMIO access virtualisation (XEN) - APIC TPR shadow (XEN) - Extended Page Tables (EPT) (XEN) - Virtual-Processor Identifiers (VPID) (XEN) - Virtual NMI (XEN) - MSR direct-access bitmap (XEN) HVM: ASIDs enabled. (XEN) HVM: VMX enabled (XEN) HVM: Hardware Assisted Paging detected. (XEN) Intel machine check reporting enabled (XEN) Intel VT-d Snoop Control supported. (XEN) Intel VT-d DMA Passthrough not supported. (XEN) Intel VT-d Queued Invalidation supported. (XEN) Intel VT-d Interrupt Remapping not supported. (XEN) I/O virtualisation enabled (XEN) I/O virtualisation for PV guests disabled (XEN) EPT support 2M super page. (XEN) EPT support 2M super page. (XEN) EPT support 2M super page. (XEN) Total of 4 processors activated. (XEN) ENABLING IO-APIC IRQs (XEN) -> Using new ACK method (XEN) ..TIMER: vector=0xF0 apic1=0 pin1=2 apic2=-1 pin2=-1 (XEN) TSC is reliable, synchronization unnecessary (XEN) Platform timer is 14.318MHz HPET �(XEN) Allocated console ring of 32 KiB. (XEN) microcode.c:73:d32767 microcode: CPU1 resumed (XEN) microcode.c:73:d32767 microcode: CPU2 resumed (XEN) Brought up 4 CPUs (XEN) microcode.c:73:d32767 microcode: CPU3 resumed (XEN) Turbo Mode detected! (XEN) HPET: 8 timers in total, 8 timers will be used for broadcast (XEN) ACPI sleep modes: S3 (XEN) mcheck_poll: Machine check polling timer started. (XEN) *** LOADING DOMAIN 0 *** (XEN) elf_parse_binary: phdr: paddr=0x1000000 memsz=0x69c000 (XEN) elf_parse_binary: phdr: paddr=0x169c000 memsz=0xe3cb0 (XEN) elf_parse_binary: phdr: paddr=0x1780000 memsz=0x888 (XEN) elf_parse_binary: phdr: paddr=0x1781000 memsz=0x14498 (XEN) elf_parse_binary: phdr: paddr=0x1796000 memsz=0x9f5000 (XEN) elf_parse_binary: memory: 0x1000000 -> 0x218b000 (XEN) elf_xen_parse_note: GUEST_OS = "linux" (XEN) elf_xen_parse_note: GUEST_VERSION = "2.6" (XEN) elf_xen_parse_note: XEN_VERSION = "xen-3.0" (XEN) elf_xen_parse_note: VIRT_BASE = 0xffffffff80000000 (XEN) elf_xen_parse_note: ENTRY = 0xffffffff81796200 (XEN) elf_xen_parse_note: HYPERCALL_PAGE = 0xffffffff81009000 (XEN) elf_xen_parse_note: FEATURES = "!writable_page_tables|pae_pgdir_above_4gb" (XEN) elf_xen_parse_note: PAE_MODE = "yes" (XEN) elf_xen_parse_note: LOADER = "generic" (XEN) elf_xen_parse_note: unknown xen elf note (0xd) (XEN) elf_xen_parse_note: SUSPEND_CANCEL = 0x1 (XEN) elf_xen_parse_note: HV_START_LOW = 0xffff800000000000 (XEN) elf_xen_parse_note: PADDR_OFFSET = 0x0 (XEN) elf_xen_addr_calc_check: addresses: (XEN) virt_base = 0xffffffff80000000 (XEN) elf_paddr_offset = 0x0 (XEN) virt_offset = 0xffffffff80000000 (XEN) virt_kstart = 0xffffffff81000000 (XEN) virt_kend = 0xffffffff8218b000 (XEN) virt_entry = 0xffffffff81796200 (XEN) p2m_base = 0xffffffffffffffff (XEN) Xen kernel: 64-bit, lsb, compat32 (XEN) Dom0 kernel: 64-bit, PAE, lsb, paddr 0x1000000 -> 0x218b000 (XEN) PHYSICAL MEMORY ARRANGEMENT: (XEN) Dom0 alloc.: 0000000138000000->000000013c000000 (981633 pages to be allocated) (XEN) VIRTUAL MEMORY ARRANGEMENT: (XEN) Loaded kernel: ffffffff81000000->ffffffff8218b000 (XEN) Init. ramdisk: ffffffff8218b000->ffffffff82b69800 (XEN) Phys-Mach map: ffffffff82b6a000->ffffffff83307408 (XEN) Start info: ffffffff83308000->ffffffff833084b4 (XEN) Page tables: ffffffff83309000->ffffffff83326000 (XEN) Boot stack: ffffffff83326000->ffffffff83327000 (XEN) TOTAL: ffffffff80000000->ffffffff83400000 (XEN) ENTRY ADDRESS: ffffffff81796200 (XEN) Dom0 has maximum 4 VCPUs (XEN) elf_load_binary: phdr 0 at 0xffffffff81000000 -> 0xffffffff8169c000 (XEN) elf_load_binary: phdr 1 at 0xffffffff8169c000 -> 0xffffffff8177fcb0 (XEN) elf_load_binary: phdr 2 at 0xffffffff81780000 -> 0xffffffff81780888 (XEN) elf_load_binary: phdr 3 at 0xffffffff81781000 -> 0xffffffff81795498 (XEN) elf_load_binary: phdr 4 at 0xffffffff81796000 -> 0xffffffff81830000 (XEN) Scrubbing Free RAM: .done. (XEN) Xen trace buffers: disabled (XEN) Std. Loglevel: All (XEN) Guest Loglevel: All (XEN) Xen is relinquishing VGA console. (XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch input to Xen) (XEN) Freed 164kB init memory. mapping kernel into physical memory Xen: setup ISA identity maps about to get started... Initializing cgroup subsys cpuset Initializing cgroup subsys cpu Linux version 2.6.32.11 (jeremy@lilith.goop.org) (gcc version 4.4.3 20100127 (Red Hat 4.4.3-4) (GCC) ) #7 SMP PREEMPT Mon Apr 5 14:58:54 PDT 2010 Command line: ro root=/dev/mapper/vg_lilith--raid-root LANG=en_US.UTF-8 SYSFONT=latarcyrheb-sun16 KEYBOARDTYPE=pc KEYTABLE=us ignore_loglevel earlyprintk=xen console=hvc0 rdshell pcie_aspm=off KERNEL supported cpus: Intel GenuineIntel AMD AuthenticAMD Centaur CentaurHauls xen_release_chunk: looking at area pfn bf790-bf79e: 14 pages freed xen_release_chunk: looking at area pfn bf7e0-bf7ed: 13 pages freed xen_release_chunk: looking at area pfn c0000-e0000: 131072 pages freed xen_release_chunk: looking at area pfn f0000-fec00: 14977 pages freed xen_release_chunk: looking at area pfn fec01-fed20: 0 pages freed xen_release_chunk: looking at area pfn fed40-fee00: 0 pages freed released 146076 pages of unused memory BIOS-provided physical RAM map: Xen: 0000000000000000 - 000000000009d800 (usable) Xen: 000000000009d800 - 0000000000100000 (reserved) Xen: 0000000000100000 - 00000000bf790000 (usable) Xen: 00000000bf79e000 - 00000000bf7a0000 type 9 Xen: 00000000bf7a0000 - 00000000bf7ae000 (ACPI data) Xen: 00000000bf7ae000 - 00000000bf7d0000 (ACPI NVS) Xen: 00000000bf7d0000 - 00000000bf7e0000 (reserved) Xen: 00000000bf7ed000 - 00000000c0000000 (reserved) Xen: 00000000e0000000 - 00000000f0000000 (reserved) Xen: 00000000fec00000 - 00000000fec01000 (reserved) Xen: 00000000fed20000 - 00000000fed40000 (reserved) Xen: 00000000fee00000 - 00000000fee01000 (reserved) debug: ignoring loglevel setting. bootconsole [xenboot0] enabled DMI present. last_pfn = 0xbf790 max_arch_pfn = 0x400000000 x86 PAT enabled: cpu 0, old 0x50100070406, new 0x7010600070106 initial memory mapped : 0 - 20000000 init_memory_mapping: 0000000000000000-00000000bf790000 0000000000 - 00bf790000 page 4k kernel direct mapping tables up to bf790000 @ 100000-700000 RAMDISK: 0218b000 - 02b69800 ACPI: RSDP 00000000000fa110 00024 (v02 ACPIAM) ACPI: XSDT 00000000bf7a0100 00084 (v01 SMCI 20100225 MSFT 00000097) ACPI: FACP 00000000bf7a0290 000F4 (v04 022510 FACP1918 20100225 MSFT 00000097) ACPI: DSDT 00000000bf7a05f0 06C55 (v02 10605 10605000 00000000 INTL 20051117) ACPI: FACS 00000000bf7ae000 00040 ACPI: APIC 00000000bf7a0390 00092 (v02 022510 APIC1918 20100225 MSFT 00000097) ACPI: MCFG 00000000bf7a0430 0003C (v01 022510 OEMMCFG 20100225 MSFT 00000097) ACPI: OEMB 00000000bf7ae040 00073 (v01 022510 OEMB1918 20100225 MSFT 00000097) ACPI: HPET 00000000bf7aa5f0 00038 (v01 022510 OEMHPET 20100225 MSFT 00000097) ACPI: GSCI 00000000bf7ae0c0 02024 (v01 022510 GMCHSCI 20100225 MSFT 00000097) ACPI: 00000000bf7b00f0 00090 (v01 AMI OEMDMAR 00000001 MSFT 00000097) ACPI: SSDT 00000000bf7b1580 00363 (v01 DpgPmm CpuPm 00000012 INTL 20051117) ACPI: EINJ 00000000bf7aa630 00130 (v01 AMIER AMI_EINJ 20100225 MSFT 00000097) ACPI: BERT 00000000bf7aa7c0 00030 (v01 AMIER AMI_BERT 20100225 MSFT 00000097) ACPI: ERST 00000000bf7aa7f0 001B0 (v01 AMIER AMI_ERST 20100225 MSFT 00000097) ACPI: HEST 00000000bf7aa9a0 000A8 (v01 AMIER ABC_HEST 20100225 MSFT 00000097) ACPI: Local APIC address 0xfee00000 No NUMA configuration found Faking a node at 0000000000000000-00000000bf790000 Bootmem setup node 0 0000000000000000-00000000bf790000 NODE_DATA [0000000000001000 - 0000000000005fff] bootmap [0000000000008000 - 000000000001fef7] pages 18 (8 early reservations) ==> bootmem [0000000000 - 00bf790000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0003309000 - 0003326000] XEN PAGETABLES ==> [0003309000 - 0003326000] #2 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] #3 [0001000000 - 000216a048] TEXT DATA BSS ==> [0001000000 - 000216a048] #4 [000218b000 - 0002b69800] RAMDISK ==> [000218b000 - 0002b69800] #5 [0002b6a000 - 0003309000] XEN START INFO ==> [0002b6a000 - 0003309000] #6 [000216b000 - 000216b21b] BRK ==> [000216b000 - 000216b21b] #7 [0000100000 - 00006e0000] PGTABLE ==> [0000100000 - 00006e0000] found SMP MP-table at [ffff8800000ff780] ff780 Zone PFN ranges: DMA 0x00000000 -> 0x00001000 DMA32 0x00001000 -> 0x00100000 Normal 0x00100000 -> 0x00100000 Movable zone start PFN for each node early_node_map[2] active PFN ranges 0: 0x00000000 -> 0x0000009d 0: 0x00000100 -> 0x000bf790 On node 0 totalpages: 784173 DMA zone: 88 pages used for memmap DMA zone: 1507 pages reserved DMA zone: 2402 pages, LIFO batch:0 DMA32 zone: 16762 pages used for memmap DMA32 zone: 763414 pages, LIFO batch:31 ACPI: PM-Timer IO Port: 0x808 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled) ACPI: LAPIC (acpi_id[0x05] lapic_id[0x84] disabled) ACPI: LAPIC (acpi_id[0x06] lapic_id[0x85] disabled) ACPI: LAPIC (acpi_id[0x07] lapic_id[0x86] disabled) ACPI: LAPIC (acpi_id[0x08] lapic_id[0x87] disabled) ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) ACPI: IOAPIC (id[0x07] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 7, version 0, address 0xfec00000, GSI 0-0 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ERROR: Unable to locate IOAPIC for GSI 2 ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ERROR: Unable to locate IOAPIC for GSI 9 Using ACPI (MADT) for SMP configuration information ACPI: HPET id: 0x8086a701 base: 0xfed00000 SMP: Allowing 4 CPUs, 0 hotplug CPUs nr_irqs_gsi: 256 PM: Registered nosave memory: 000000000009d000 - 000000000009e000 PM: Registered nosave memory: 000000000009e000 - 0000000000100000 Allocating PCI resources starting at c0000000 (gap: c0000000:20000000) Booting paravirtualized kernel on Xen Xen version: 4.1-unstable (preserve-AD) (dom0) NR_CPUS:16 nr_cpumask_bits:16 nr_cpu_ids:4 nr_node_ids:1 PERCPU: Embedded 28 pages/cpu @ffff88000336d000 s83096 r8192 d23400 u114688 pcpu-alloc: s83096 r8192 d23400 u114688 alloc=28*4096 pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 trying to map vcpu_info 0 at ffff880003378020, mfn 13b378, offset 32 cpu 0 using vcpu_info at ffff880003378020 trying to map vcpu_info 1 at ffff880003394020, mfn 13b394, offset 32 cpu 1 using vcpu_info at ffff880003394020 trying to map vcpu_info 2 at ffff8800033b0020, mfn 13b3b0, offset 32 cpu 2 using vcpu_info at ffff8800033b0020 trying to map vcpu_info 3 at ffff8800033cc020, mfn 13b3cc, offset 32 cpu 3 using vcpu_info at ffff8800033cc020 Xen: using vcpu_info placement Built 1 zonelists in Node order, mobility grouping on. Total pages: 765816 Policy zone: DMA32 Kernel command line: ro root=/dev/mapper/vg_lilith--raid-root LANG=en_US.UTF-8 SYSFONT=latarcyrheb-sun16 KEYBOARDTYPE=pc KEYTABLE=us ignore_loglevel earlyprintk=xen console=hvc0 rdshell pcie_aspm=off PCIe ASPM is disabled PID hash table entries: 4096 (order: 3, 32768 bytes) Initializing CPU#0 DMA: Placing 64MB software IO TLB between ffff88000794a000 - ffff88000b94a000 DMA: software IO TLB at phys 0x794a000 - 0xb94a000 xen_swiotlb_fixup: buf=ffff88000794a000 size=67108864 xen_swiotlb_fixup: buf=ffff88000b9aa000 size=32768 Memory: 2960308k/3137088k available (4691k kernel code, 396k absent, 176384k reserved, 2987k data, 656k init) Hierarchical RCU implementation. NR_IRQS:4352 nr_irqs:1280 xen: --> irq=0 xen: --> irq=1 xen: --> irq=2 xen: --> irq=3 xen: --> irq=4 xen: --> irq=5 xen: --> irq=6 xen: --> irq=7 xen: --> irq=8 xen: --> irq=9 xen: --> irq=10 xen: --> irq=11 xen: --> irq=12 xen: --> irq=13 xen: --> irq=14 xen: --> irq=15 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) xen: sci override: source_irq=9 global_irq=9 trigger=c polarity=1 xen: registering gsi 9 triggering 0 polarity 0 xen_allocate_pirq: returning irq 9 for gsi 9 xen: --> irq=9 xen: acpi sci 9 Console: colour VGA+ 80x25 console [hvc0] enabled, bootconsole disabled console [hvc0] enabled, bootconsole disabled Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar ... MAX_LOCKDEP_SUBCLASSES: 8 ... MAX_LOCK_DEPTH: 48 ... MAX_LOCKDEP_KEYS: 8191 ... CLASSHASH_SIZE: 4096 ... MAX_LOCKDEP_ENTRIES: 16384 ... MAX_LOCKDEP_CHAINS: 32768 ... CHAINHASH_SIZE: 16384 memory used by lock dependency info: 5855 kB per task-struct memory footprint: 1920 bytes Xen: using vcpuop timer interface installing Xen timer for CPU 0 alloc irq_desc for 1279 on node 0 alloc kstat_irqs on node 0 Detected 2400.066 MHz processor. Calibrating delay loop (skipped), value calculated using timer frequency.. 4800.13 BogoMIPS (lpj=2400066) Security Framework initialized SELinux: Initializing. SELinux: Starting in permissive mode Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) Mount-cache hash table entries: 256 Initializing cgroup subsys ns Initializing cgroup subsys cpuacct CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 256K CPU: L3 cache: 8192K CPU 0/0x0 -> Node 0 CPU: Unsupported number of siblings 16 Performance Events: unsupported p6 CPU model 30 no PMU driver, software events only. lockdep: fixing up alternatives. SMP alternatives: switching to UP code ACPI: Core revision 20090903 alloc irq_desc for 1278 on node 0 alloc kstat_irqs on node 0 cpu 0 spinlock event irq 1278 alloc irq_desc for 1277 on node 0 alloc kstat_irqs on node 0 alloc irq_desc for 1276 on node 0 alloc kstat_irqs on node 0 alloc irq_desc for 1275 on node 0 alloc kstat_irqs on node 0 alloc irq_desc for 1274 on node 0 alloc kstat_irqs on node 0 installing Xen timer for CPU 1 alloc irq_desc for 1273 on node 0 alloc kstat_irqs on node 0 alloc irq_desc for 1272 on node 0 alloc kstat_irqs on node 0 cpu 1 spinlock event irq 1272 lockdep: fixing up alternatives. SMP alternatives: switching to SMP code alloc irq_desc for 1271 on node 0 alloc kstat_irqs on node 0 alloc irq_desc for 1270 on node 0 alloc kstat_irqs on node 0 alloc irq_desc for 1269 on node 0 alloc kstat_irqs on node 0 alloc irq_desc for 1268 on node 0 alloc kstat_irqs on node 0 Initializing CPU#1 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 256K CPU: L3 cache: 8192K CPU 1/0x0 -> Node 0 CPU: Unsupported number of siblings 16 installing Xen timer for CPU 2 alloc irq_desc for 1267 on node 0 alloc kstat_irqs on node 0 alloc irq_desc for 1266 on node 0 alloc kstat_irqs on node 0 cpu 2 spinlock event irq 1266 alloc irq_desc for 1265 on node 0 alloc kstat_irqs on node 0 alloc irq_desc for 1264 on node 0 alloc kstat_irqs on node 0 alloc irq_desc for 1263 on node 0 alloc kstat_irqs on node 0 alloc irq_desc for 1262 on node 0 alloc kstat_irqs on node 0 Initializing CPU#2 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 256K CPU: L3 cache: 8192K CPU 2/0x0 -> Node 0 CPU: Unsupported number of siblings 16 installing Xen timer for CPU 3 alloc irq_desc for 1261 on node 0 alloc kstat_irqs on node 0 alloc irq_desc for 1260 on node 0 alloc kstat_irqs on node 0 cpu 3 spinlock event irq 1260 alloc irq_desc for 1259 on node 0 alloc kstat_irqs on node 0 alloc irq_desc for 1258 on node 0 alloc kstat_irqs on node 0 alloc irq_desc for 1257 on node 0 alloc kstat_irqs on node 0 alloc irq_desc for 1256 on node 0 alloc kstat_irqs on node 0 Initializing CPU#3 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 256K CPU: L3 cache: 8192K CPU 3/0x0 -> Node 0 CPU: Unsupported number of siblings 16 Brought up 4 CPUs Grant table initialized Time: 16:42:50 Date: 04/07/10 NET: Registered protocol family 16 alloc irq_desc for 1255 on node 0 alloc kstat_irqs on node 0 ACPI: bus type pci registered PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 PCI: MCFG area at e0000000 reserved in E820 PCI: Using MMCONFIG at e0000000 - efffffff PCI: Using configuration type 1 for base access bio: create slab<bio-0> at 0 ERROR: Unable to locate IOAPIC for GSI 9 ACPI: EC: Look up EC in DSDT ACPI Warning for \_SB_._OSC: Return type mismatch - found Integer, expected Buffer (20090903/nspredef-1006) \_SB_:_OSC evaluation returned wrong type _OSC request data:1 6 ACPI: Executed 1 blocks of module-level executable AML code ACPI: Interpreter enabled ACPI: (supports S0 S1 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI Warning: Incorrect checksum in table [OEMB] - 91, should be 8E (20090903/tbutils-314) ACPI Warning: Incorrect checksum in table [ ] - 7B, should be BF (20090903/tbutils-314) ACPI: No dock devices found. ACPI: PCI Root Bridge [PCI0] (0000:00) pci 0000:00:03.0: PME# supported from D0 D3hot D3cold pci 0000:00:03.0: PME# disabled pci 0000:00:05.0: PME# supported from D0 D3hot D3cold pci 0000:00:05.0: PME# disabled pci 0000:00:1a.0: reg 10 32bit mmio: [0xfb3fc000-0xfb3fc3ff] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold pci 0000:00:1a.0: PME# disabled pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold pci 0000:00:1c.0: PME# disabled pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold pci 0000:00:1c.4: PME# disabled pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold pci 0000:00:1c.5: PME# disabled pci 0000:00:1d.0: reg 10 32bit mmio: [0xfb3fa000-0xfb3fa3ff] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold pci 0000:00:1d.0: PME# disabled pci 0000:00:1f.2: reg 10 io port: [0xb400-0xb407] pci 0000:00:1f.2: reg 14 io port: [0xbc00-0xbc03] pci 0000:00:1f.2: reg 18 io port: [0xb880-0xb887] pci 0000:00:1f.2: reg 1c io port: [0xb800-0xb803] pci 0000:00:1f.2: reg 20 io port: [0xb480-0xb49f] pci 0000:00:1f.2: reg 24 32bit mmio: [0xfb3f8000-0xfb3f87ff] pci 0000:00:1f.2: PME# supported from D3hot pci 0000:00:1f.2: PME# disabled pci 0000:00:1f.3: reg 10 64bit mmio: [0xfb3f6000-0xfb3f60ff] pci 0000:00:1f.3: reg 20 io port: [0x400-0x41f] pci 0000:03:00.0: reg 10 32bit mmio: [0xfb420000-0xfb43ffff] pci 0000:03:00.0: reg 14 32bit mmio: [0xfb480000-0xfb4fffff] pci 0000:03:00.0: reg 18 io port: [0xcc00-0xcc1f] pci 0000:03:00.0: reg 1c 32bit mmio: [0xfb41c000-0xfb41ffff] pci 0000:03:00.0: reg 30 32bit mmio pref: [0xfb440000-0xfb47ffff] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold pci 0000:03:00.0: PME# disabled pci 0000:00:1c.0: bridge io port: [0xc000-0xcfff] pci 0000:00:1c.0: bridge 32bit mmio: [0xfb400000-0xfb4fffff] pci 0000:04:00.0: reg 10 32bit mmio: [0xfb5e0000-0xfb5fffff] pci 0000:04:00.0: reg 18 io port: [0xdc00-0xdc1f] pci 0000:04:00.0: reg 1c 32bit mmio: [0xfb5dc000-0xfb5dffff] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold pci 0000:04:00.0: PME# disabled pci 0000:00:1c.4: bridge io port: [0xd000-0xdfff] pci 0000:00:1c.4: bridge 32bit mmio: [0xfb500000-0xfb5fffff] pci 0000:05:00.0: reg 10 32bit mmio: [0xfb6e0000-0xfb6fffff] pci 0000:05:00.0: reg 18 io port: [0xec00-0xec1f] pci 0000:05:00.0: reg 1c 32bit mmio: [0xfb6dc000-0xfb6dffff] pci 0000:05:00.0: PME# supported from D0 D3hot D3cold pci 0000:05:00.0: PME# disabled pci 0000:00:1c.5: bridge io port: [0xe000-0xefff] pci 0000:00:1c.5: bridge 32bit mmio: [0xfb600000-0xfb6fffff] pci 0000:06:03.0: reg 10 32bit mmio pref: [0xfa000000-0xfaffffff] pci 0000:06:03.0: reg 14 32bit mmio: [0xfb7fc000-0xfb7fffff] pci 0000:06:03.0: reg 18 32bit mmio: [0xfb800000-0xfbffffff] pci 0000:00:1e.0: transparent bridge pci 0000:00:1e.0: bridge 32bit mmio: [0xfb700000-0xfbffffff] pci 0000:00:1e.0: bridge 64bit mmio pref: [0xfa000000-0xfaffffff] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR1E._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR20._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR24._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR25._PRT] (XEN) PCI add device 00:00.0 (XEN) PCI add device 00:03.0 (XEN) PCI add device 00:05.0 (XEN) PCI add device 00:08.0 (XEN) PCI add device 00:08.1 (XEN) PCI add device 00:08.2 (XEN) PCI add device 00:08.3 (XEN) PCI add device 00:10.0 (XEN) PCI add device 00:10.1 (XEN) PCI add device 00:1a.0 (XEN) PCI add device 00:1c.0 (XEN) PCI add device 00:1c.4 (XEN) PCI add device 00:1c.5 (XEN) PCI add device 00:1d.0 (XEN) PCI add device 00:1e.0 (XEN) PCI add device 00:1f.0 (XEN) PCI add device 00:1f.2 (XEN) PCI add device 00:1f.3 (XEN) PCI add device 03:00.0 (XEN) PCI add device 04:00.0 (XEN) PCI add device 05:00.0 (XEN) PCI add device 06:03.0 ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 6 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12 *14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 *7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 6 7 10 11 12 14 *15) sync cpu 0 get result 1 max_id 3 sync cpu 1 get result 1 max_id 3 sync cpu 2 get result 1 max_id 3 sync cpu 3 get result 1 max_id 3 alloc irq_desc for 1254 on node 0 alloc kstat_irqs on node 0 xen_balloon: Initialising balloon driver with page order 0. vgaarb: device added: PCI:0000:06:03.0,decodes=io+mem,owns=io+mem,locks=none vgaarb: loaded SCSI subsystem initialized libata version 3.00 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default Switching to clocksource xen pnp: PnP ACPI init ACPI: bus type pnp registered xen: registering gsi 8 triggering 1 polarity 0 xen_allocate_pirq: returning irq 8 for gsi 8 xen:scsi0 : ahci scsi1 : ahci scsi2 : ahci scsi3 : ahci scsi4 : ahci scsi5 : ahci ata1: SATA max UDMA/133 abar m2048@0xfb3f8000 port 0xfb3f8100 irq 1247 ata2: SATA max UDMA/133 abar m2048@0xfb3f8000 port 0xfb3f8180 irq 1247 ata3: SATA max UDMA/133 abar m2048@0xfb3f8000 port 0xfb3f8200 irq 1247 ata4: SATA max UDMA/133 abar m2048@0xfb3f8000 port 0xfb3f8280 irq 1247 ata5: SATA max UDMA/133 abar m2048@0xfb3f8000 port 0xfb3f8300 irq 1247 ata6: SATA max UDMA/133 abar m2048@0xfb3f8000 port 0xfb3f8380 irq 1247 usb 1-1: udev 2, busnum 1, minor = 1 usb 1-1: New USB device found, idVendor=8087, idProduct=0020 usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 usb 1-1: usb_probe_device usb 1-1: configuration #1 chosen from 1 choice usb 1-1: adding 1-1:1.0 (config #1, interface 0) hub 1-1:1.0: usb_probe_interface hub 1-1:1.0: usb_probe_interface - got id hub 1-1:1.0: USB hub found hub 1-1:1.0: 6 ports detected hub 1-1:1.0: standalone hub hub 1-1:1.0: individual port power switching hub 1-1:1.0: individual port over-current protection hub 1-1:1.0: Single TT hub 1-1:1.0: TT requires at most 8 FS bit times (666 ns) hub 1-1:1.0: Port indicators are supported hub 1-1:1.0: power on to power good time: 100ms hub 1-1:1.0: local power source is good hub 1-1:1.0: enabling power on all ports hub 2-0:1.0: state 7 ports 2 chg 0002 evt 0000 hub 2-0:1.0: port 1, status 0501, change 0000, 480 Mb/s ehci_hcd 0000:00:1d.0: port 1 high speed ehci_hcd 0000:00:1d.0: GetStatus port 1 status 001005 POWER sig=se0 PE CONNECT hub 1-1:1.0: port 2: status 0101 change 0001 usb 2-1: new high speed USB device using ehci_hcd and address 2 ehci_hcd 0000:00:1d.0: port 1 high speed ehci_hcd 0000:00:1d.0: GetStatus port 1 status 001005 POWER sig=se0 PE CONNECT usb 1-1: link qh256-0001/ffff8800bcd9ab40 start 1 [1/0 us] usb 2-1: udev 2, busnum 2, minor = 129 usb 2-1: New USB device found, idVendor=8087, idProduct=0020 usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 usb 2-1: usb_probe_device usb 2-1: configuration #1 chosen from 1 choice usb 2-1: adding 2-1:1.0 (config #1, interface 0) hub 2-1:1.0: usb_probe_interface hub 2-1:1.0: usb_probe_interface - got id hub 2-1:1.0: USB hub found hub 2-1:1.0: 8 ports detected hub 2-1:1.0: standalone hub hub 2-1:1.0: individual port power switching hub 2-1:1.0: individual port over-current protection hub 2-1:1.0: Single TT hub 2-1:1.0: TT requires at most 8 FS bit times (666 ns) hub 2-1:1.0: Port indicators are supported hub 2-1:1.0: power on to power good time: 100ms hub 2-1:1.0: local power source is good hub 2-1:1.0: enabling power on all ports hub 1-1:1.0: state 7 ports 6 chg 0004 evt 0000 hub 1-1:1.0: port 2, status 0101, change 0000, 12 Mb/s usb 1-1.2: new full speed USB device using ehci_hcd and address 3 hub 1-1:1.0: port 2 not reset yet, waiting 10ms ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata1.00: ATA-8: WDC WD10EADS-00P8B0, 01.00A01, max UDMA/133 ata1.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA ata1.00: configured for UDMA/133 scsi 0:0:0:0: Direct-Access ATA WDC WD10EADS-00P 01.0 PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 0:0:0:0: Attached scsi generic sg0 type 0 sda: usb 2-1: link qh256-0001/ffff8800be450cc0 start 1 [1/0 us] sda1 sda2 sda3 sda4 sd 0:0:0:0: [sda] Attached SCSI disk usb 1-1.2: skipped 1 descriptor after interface usb 1-1.2: skipped 1 descriptor after interface usb 1-1.2: default language 0x0409 usb 1-1.2: udev 3, busnum 1, minor = 2 usb 1-1.2: New USB device found, idVendor=0557, idProduct=2221 usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 1-1.2: Product: Hermon USB hidmouse Device usb 1-1.2: Manufacturer: Winbond Electronics Corp usb 1-1.2: usb_probe_device usb 1-1.2: configuration #1 chosen from 1 choice usb 1-1.2: adding 1-1.2:1.0 (config #1, interface 0) usbhid 1-1.2:1.0: usb_probe_interface usbhid 1-1.2:1.0: usb_probe_interface - got id input: Winbond Electronics Corp Hermon USB hidmouse Device as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input4 generic-usb 0003:0557:2221.0001: input,hidraw0: USB HID v1.00 Mouse [Winbond Electronics Corp Hermon USB hidmouse Device] on usb-0000:00:1a.0-1.2/input0 usb 1-1.2: adding 1-1.2:1.1 (config #1, interface 1) usbhid 1-1.2:1.1: usb_probe_interface usbhid 1-1.2:1.1: usb_probe_interface - got id input: Winbond Electronics Corp Hermon USB hidmouse Device as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.1/input/input5 usb 1-1.2: link qh8-0601/ffff8800bc52e440 start 2 [1/2 us] generic-usb 0003:0557:2221.0002: input,hidraw1: USB HID v1.00 Keyboard [Winbond Electronics Corp Hermon USB hidmouse Device] on usb-0000:00:1a.0-1.2/input1 hub 2-1:1.0: state 7 ports 8 chg 0000 evt 0000 hub 1-1:1.0: state 7 ports 6 chg 0000 evt 0004 ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata2.00: ATA-7: SAMSUNG HD103SI, 1AG01118, max UDMA7 ata2.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA ata2.00: configured for UDMA/133 scsi 1:0:0:0: Direct-Access ATA SAMSUNG HD103SI 1AG0 PQ: 0 ANSI: 5 sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) sd 1:0:0:0: Attached scsi generic sg1 type 0 sd 1:0:0:0: [sdb] Write Protect is off sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdb: sdb1 sdb2 sdb3 sdb4 sd 1:0:0:0: [sdb] Attached SCSI disk input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input6 ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata3.00: ATA-8: WDC WD10EADS-00P8B0, 01.00A01, max UDMA/133 ata3.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA ata3.00: configured for UDMA/133 scsi 2:0:0:0: Direct-Access ATA WDC WD10EADS-00P 01.0 PQ: 0 ANSI: 5 sd 2:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) sd 2:0:0:0: Attached scsi generic sg2 type 0 sd 2:0:0:0: [sdc] Write Protect is off sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdc: sdc1 sdc2 sdc3 sdc4 sd 2:0:0:0: [sdc] Attached SCSI disk hub 2-1:1.0: hub_suspend usb 2-1: unlink qh256-0001/ffff8800be450cc0 start 1 [1/0 us] usb 2-1: usb auto-suspend ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata4.00: ATA-7: SAMSUNG HD103SI, 1AG01118, max UDMA7 ata4.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA ata4.00: configured for UDMA/133 scsi 3:0:0:0: Direct-Access ATA SAMSUNG HD103SI 1AG0 PQ: 0 ANSI: 5 sd 3:0:0:0: [sdd] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) sd 3:0:0:0: Attached scsi generic sg3 type 0 sd 3:0:0:0: [sdd] Write Protect is off sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00 sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdd: sdd1 sdd2 sdd3 sdd4 sd 3:0:0:0: [sdd] Attached SCSI disk ata5: SATA link down (SStatus 0 SControl 300) ata6: SATA link down (SStatus 0 SControl 300) md: raid10 personality registered for level 10 Intel AES-NI instructions are not detected. md: md0 stopped. md: bind<sdb3> md: bind<sdc3> md: bind<sdd3> md: bind<sda3> raid10: md0 is not clean -- starting background reconstruction raid10: raid set md0 active with 4 out of 4 devices md0: detected capacity change from 0 to 838860668928 md: resync of RAID array md0 md: minimum _guaranteed_ speed: 1000 KB/sec/disk. md: using maximum available idle IO bandwidth (but not more than 200000 KB/sec) for resync. md: using 128k window, over a total of 819199872 blocks. (XEN) [VT-D]iommu.c:821: iommu_fault_status: Primary Pending Fault (XEN) [VT-D]iommu.c:796: DMAR:[DMA Write] Request device [00:1f.2] fault addr bf579000, iommu reg = ffff82c3fff57000 (XEN) DMAR:[fault reason 05h] PTE Write access is not set (XEN) print_vtd_entries: iommu = ffff83013fff3e80 bdf = 0:1f.2 gmfn = bf579 (XEN) root_entry = ffff83013ff36000 (XEN) root_entry[0] = 13c6bb001 (XEN) context = ffff83013c6bb000 (XEN) context[fa] = 2_13fec4001 (XEN) l4 = ffff83013fec4000 (XEN) l4_index = 0 (XEN) l4[0] = 13fec1003 (XEN) l3 = ffff83013fec1000 (XEN) l3_index = 2 (XEN) l3[2] = 13ccbe003 (XEN) l2 = ffff83013ccbe000 (XEN) l2_index = 1fa (XEN) l2[1fa] = 13cac3003 (XEN) l1 = ffff83013cac3000 (XEN) l1_index = 179 (XEN) l1[179] = 0 (XEN) l1[179] not present (XEN) [VT-D]iommu.c:796: DMAR:[DMA Write] Request device [00:1f.2] fault addr bf579000, iommu reg = ffff82c3fff57000 (XEN) DMAR:[fault reason 05h] PTE Write access is not set (XEN) print_vtd_entries: iommu = ffff83013fff3e80 bdf = 0:1f.2 gmfn = bf579 (XEN) root_entry = ffff83013ff36000 (XEN) root_entry[0] = 13c6bb001 (XEN) context = ffff83013c6bb000 (XEN) context[fa] = 2_13fec4001 (XEN) l4 = ffff83013fec4000 (XEN) l4_index = 0 (XEN) l4[0] = 13fec1003 (XEN) l3 = ffff83013fec1000 (XEN) l3_index = 2 (XEN) l3[2] = 13ccbe003 (XEN) l2 = ffff83013ccbe000 (XEN) l2_index = 1fa (XEN) l2[1fa] = 13cac3003 (XEN) l1 = ffff83013cac3000 (XEN) l1_index = 179 (XEN) l1[179] = 0 (XEN) l1[179] not present (XEN) [VT-D]iommu.c:796: DMAR:[DMA Write] Request device [00:1f.2] fault addr bf578000, iommu reg = ffff82c3fff57000 (XEN) DMAR:[fault reason 05h] PTE Write access is not set (XEN) print_vtd_entries: iommu = ffff83013fff3e80 bdf = 0:1f.2 gmfn = bf578 (XEN) root_entry = ffff83013ff36000 (XEN) root_entry[0] = 13c6bb001 (XEN) context = ffff83013c6bb000 (XEN) context[fa] = 2_13fec4001 (XEN) l4 = ffff83013fec4000 (XEN) l4_index = 0 (XEN) l4[0] = 13fec1003 (XEN) l3 = ffff83013fec1000 (XEN) l3_index = 2 (XEN) l3[2] = 13ccbe003 (XEN) l2 = ffff83013ccbe000 (XEN) l2_index = 1fa (XEN) l2[1fa] = 13cac3003 (XEN) l1 = ffff83013cac3000 (XEN) l1_index = 178 (XEN) l1[178] = 0 (XEN) l1[178] not present (XEN) [VT-D]iommu.c:796: DMAR:[DMA Write] Request device [00:1f.2] fault addr bf578000, iommu reg = ffff82c3fff57000 (XEN) DMAR:[fault reason 05h] PTE Write access is not set (XEN) print_vtd_entries: iommu = ffff83013fff3e80 bdf = 0:1f.2 gmfn = bf578 (XEN) root_entry = ffff83013ff36000 (XEN) root_entry[0] = 13c6bb001 (XEN) context = ffff83013c6bb000 (XEN) context[fa] = 2_13fec4001 (XEN) l4 = ffff83013fec4000 (XEN) l4_index = 0 (XEN) l4[0] = 13fec1003 (XEN) l3 = ffff83013fec1000 (XEN) l3_index = 2 (XEN) l3[2] = 13ccbe003 (XEN) l2 = ffff83013ccbe000 (XEN) l2_index = 1fa (XEN) l2[1fa] = 13cac3003 (XEN) l1 = ffff83013cac3000 (XEN) l1_index = 178 (XEN) l1[178] = 0 (XEN) l1[178] not present (XEN) [VT-D]iommu.c:821: iommu_fault_status: Primary Pending Fault (XEN) [VT-D]iommu.c:796: DMAR:[DMA Write] Request device [00:1f.2] fault addr bf57b000, iommu reg = ffff82c3fff57000 (XEN) DMAR:[fault reason 05h] PTE Write access is not set (XEN) print_vtd_entries: iommu = ffff83013fff3e80 bdf = 0:1f.2 gmfn = bf57b (XEN) root_entry = ffff83013ff36000 (XEN) root_entry[0] = 13c6bb001 (XEN) context = ffff83013c6bb000 (XEN) context[fa] = 2_13fec4001 (XEN) l4 = ffff83013fec4000 (XEN) l4_index = 0 (XEN) l4[0] = 13fec1003 (XEN) l3 = ffff83013fec1000 (XEN) l3_index = 2 (XEN) l3[2] = 13ccbe003 (XEN) l2 = ffff83013ccbe000 (XEN) l2_index = 1fa (XEN) l2[1fa] = 13cac3003 (XEN) l1 = ffff83013cac3000 (XEN) l1_index = 17b (XEN) l1[17b] = 0 (XEN) l1[17b] not present (XEN) [VT-D]iommu.c:796: DMAR:[DMA Write] Request device [00:1f.2] fault addr bf57b000, iommu reg = ffff82c3fff57000 (XEN) DMAR:[fault reason 05h] PTE Write access is not set (XEN) print_vtd_entries: iommu = ffff83013fff3e80 bdf = 0:1f.2 gmfn = bf57b (XEN) root_entry = ffff83013ff36000 (XEN) root_entry[0] = 13c6bb001 (XEN) context = ffff83013c6bb000 (XEN) context[fa] = 2_13fec4001 (XEN) l4 = ffff83013fec4000 (XEN) l4_index = 0 (XEN) l4[0] = 13fec1003 (XEN) l3 = ffff83013fec1000 (XEN) l3_index = 2 (XEN) l3[2] = 13ccbe003 (XEN) l2 = ffff83013ccbe000 (XEN) l2_index = 1fa (XEN) l2[1fa] = 13cac3003 (XEN) l1 = ffff83013cac3000 (XEN) l1_index = 17b (XEN) l1[17b] = 0 (XEN) l1[17b] not present md0:(XEN) [VT-D]iommu.c:821: iommu_fault_status: Primary Pending Fault (XEN) [VT-D]iommu.c:796: DMAR:[DMA Read] Request device [00:1f.2] fault addr bf57b000, iommu reg = ffff82c3fff57000 (XEN) DMAR:[fault reason 06h] PTE Read access is not set (XEN) print_vtd_entries: iommu = ffff83013fff3e80 bdf = 0:1f.2 gmfn = bf57b (XEN) root_entry = ffff83013ff36000 (XEN) root_entry[0] = 13c6bb001 (XEN) context = ffff83013c6bb000 (XEN) context[fa] = 2_13fec4001 (XEN) l4 = ffff83013fec4000 (XEN) l4_index = 0 (XEN) l4[0] = 13fec1003 (XEN) l3 = ffff83013fec1000 (XEN) l3_index = 2 (XEN) l3[2] = 13ccbe003 (XEN) l2 = ffff83013ccbe000 (XEN) l2_index = 1fa (XEN) l2[1fa] = 13cac3003 (XEN) l1 = ffff83013cac3000 (XEN) l1_index = 17b (XEN) l1[17b] = 0 (XEN) l1[17b] not present ata2.00: exception Emask 0x60 SAct 0x1 SErr 0x800 action 0x6 frozen ata2.00: irq_stat 0x20000000, host bus error ata2: SError: { HostInt } ata2.00: failed command: WRITE FPDMA QUEUED ata2.00: cmd 61/80:00:c3:aa:a0/00:00:0c:00:00/40 tag 0 ncq 65536 out res 40/00:04:c3:aa:a0/00:00:0c:00:00/40 Emask 0x60 (host bus error) ata2.00: status: { DRDY } ata2: hard resetting link ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata2.00: configured for UDMA/133 ata2: EH complete (XEN) [VT-D]iommu.c:821: iommu_fault_status: Primary Pending Fault (XEN) [VT-D]iommu.c:796: DMAR:[DMA Read] Request device [00:1f.2] fault addr bf57b000, iommu reg = ffff82c3fff57000 (XEN) DMAR:[fault reason 06h] PTE Read access is not set (XEN) print_vtd_entries: iommu = ffff83013fff3e80 bdf = 0:1f.2 gmfn = bf57b (XEN) root_entry = ffff83013ff36000 (XEN) root_entry[0] = 13c6bb001 (XEN) context = ffff83013c6bb000 (XEN) context[fa] = 2_13fec4001 (XEN) l4 = ffff83013fec4000 (XEN) l4_index = 0 (XEN) l4[0] = 13fec1003 (XEN) l3 = ffff83013fec1000 (XEN) l3_index = 2 (XEN) l3[2] = 13ccbe003 (XEN) l2 = ffff83013ccbe000 (XEN) l2_index = 1fa (XEN) l2[1fa] = 13cac3003 (XEN) l1 = ffff83013cac3000 (XEN) l1_index = 17b (XEN) l1[17b] = 0 (XEN) l1[17b] not present ata2.00: exception Emask 0x60 SAct 0x1 SErr 0x800 action 0x6 frozen ata2.00: irq_stat 0x20000000, host bus error ata2: SError: { HostInt } ata2.00: failed command: WRITE FPDMA QUEUED ata2.00: cmd 61/80:00:c3:aa:a0/00:00:0c:00:00/40 tag 0 ncq 65536 out res 40/00:04:c3:aa:a0/00:00:0c:00:00/40 Emask 0x60 (host bus error) ata2.00: status: { DRDY } ata2: hard resetting link ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata2.00: configured for UDMA/133 ata2: EH complete (XEN) [VT-D]iommu.c:821: iommu_fault_status: Primary Pending Fault (XEN) [VT-D]iommu.c:796: DMAR:[DMA Read] Request device [00:1f.2] fault addr bf57b000, iommu reg = ffff82c3fff57000 (XEN) DMAR:[fault reason 06h] PTE Read access is not set (XEN) print_vtd_entries: iommu = ffff83013fff3e80 bdf = 0:1f.2 gmfn = bf57b (XEN) root_entry = ffff83013ff36000 (XEN) root_entry[0] = 13c6bb001 (XEN) context = ffff83013c6bb000 (XEN) context[fa] = 2_13fec4001 (XEN) l4 = ffff83013fec4000 (XEN) l4_index = 0 (XEN) l4[0] = 13fec1003 (XEN) l3 = ffff83013fec1000 (XEN) l3_index = 2 (XEN) l3[2] = 13ccbe003 (XEN) l2 = ffff83013ccbe000 (XEN) l2_index = 1fa (XEN) l2[1fa] = 13cac3003 (XEN) l1 = ffff83013cac3000 (XEN) l1_index = 17b (XEN) l1[17b] = 0 (XEN) l1[17b] not present ata2.00: exception Emask 0x60 SAct 0x1 SErr 0x800 action 0x6 frozen ata2.00: irq_stat 0x20000000, host bus error ata2: SError: { HostInt } ata2.00: failed command: WRITE FPDMA QUEUED ata2.00: cmd 61/80:00:c3:aa:a0/00:00:0c:00:00/40 tag 0 ncq 65536 out res 40/00:04:c3:aa:a0/00:00:0c:00:00/40 Emask 0x60 (host bus error) ata2.00: status: { DRDY } ata2: hard resetting link ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata2.00: configured for UDMA/133 ata2: EH complete (XEN) [VT-D]iommu.c:821: iommu_fault_status: Primary Pending Fault (XEN) [VT-D]iommu.c:796: DMAR:[DMA Read] Request device [00:1f.2] fault addr bf57b000, iommu reg = ffff82c3fff57000 (XEN) DMAR:[fault reason 06h] PTE Read access is not set (XEN) print_vtd_entries: iommu = ffff83013fff3e80 bdf = 0:1f.2 gmfn = bf57b (XEN) root_entry = ffff83013ff36000 (XEN) root_entry[0] = 13c6bb001 (XEN) context = ffff83013c6bb000 (XEN) context[fa] = 2_13fec4001 (XEN) l4 = ffff83013fec4000 (XEN) l4_index = 0 (XEN) l4[0] = 13fec1003 (XEN) l3 = ffff83013fec1000 (XEN) l3_index = 2 (XEN) l3[2] = 13ccbe003 (XEN) l2 = ffff83013ccbe000 (XEN) l2_index = 1fa (XEN) l2[1fa] = 13cac3003 (XEN) l1 = ffff83013cac3000 (XEN) l1_index = 17b (XEN) l1[17b] = 0 (XEN) l1[17b] not present ata2.00: exception Emask 0x60 SAct 0x1 SErr 0x800 action 0x6 frozen ata2.00: irq_stat 0x20000000, host bus error ata2: SError: { HostInt } ata2.00: failed command: WRITE FPDMA QUEUED ata2.00: cmd 61/80:00:c3:aa:a0/00:00:0c:00:00/40 tag 0 ncq 65536 out res 40/00:04:c3:aa:a0/00:00:0c:00:00/40 Emask 0x60 (host bus error) ata2.00: status: { DRDY } ata2: hard resetting link ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata2.00: configured for UDMA/133 ata2: EH complete (XEN) [VT-D]iommu.c:821: iommu_fault_status: Primary Pending Fault (XEN) [VT-D]iommu.c:796: DMAR:[DMA Read] Request device [00:1f.2] fault addr bf57b000, iommu reg = ffff82c3fff57000 (XEN) DMAR:[fault reason 06h] PTE Read access is not set (XEN) print_vtd_entries: iommu = ffff83013fff3e80 bdf = 0:1f.2 gmfn = bf57b (XEN) root_entry = ffff83013ff36000 (XEN) root_entry[0] = 13c6bb001 (XEN) context = ffff83013c6bb000 (XEN) context[fa] = 2_13fec4001 (XEN) l4 = ffff83013fec4000 (XEN) l4_index = 0 (XEN) l4[0] = 13fec1003 (XEN) l3 = ffff83013fec1000 (XEN) l3_index = 2 (XEN) l3[2] = 13ccbe003 (XEN) l2 = ffff83013ccbe000 (XEN) l2_index = 1fa (XEN) l2[1fa] = 13cac3003 (XEN) l1 = ffff83013cac3000 (XEN) l1_index = 17b (XEN) l1[17b] = 0 (XEN) l1[17b] not present ata2.00: exception Emask 0x60 SAct 0x1 SErr 0x800 action 0x6 frozen ata2.00: irq_stat 0x20000000, host bus error ata2: SError: { HostInt } ata2.00: failed command: WRITE FPDMA QUEUED ata2.00: cmd 61/80:00:c3:aa:a0/00:00:0c:00:00/40 tag 0 ncq 65536 out res 40/00:04:c3:aa:a0/00:00:0c:00:00/40 Emask 0x60 (host bus error) ata2.00: status: { DRDY } ata2: hard resetting link hub 2-0:1.0: hub_suspend usb usb2: bus auto-suspend ehci_hcd 0000:00:1d.0: suspend root hub ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata2.00: configured for UDMA/133 ata2: EH complete (XEN) [VT-D]iommu.c:821: iommu_fault_status: Primary Pending Fault (XEN) [VT-D]iommu.c:796: DMAR:[DMA Read] Request device [00:1f.2] fault addr bf57b000, iommu reg = ffff82c3fff57000 (XEN) DMAR:[fault reason 06h] PTE Read access is not set (XEN) print_vtd_entries: iommu = ffff83013fff3e80 bdf = 0:1f.2 gmfn = bf57b (XEN) root_entry = ffff83013ff36000 (XEN) root_entry[0] = 13c6bb001 (XEN) context = ffff83013c6bb000 (XEN) context[fa] = 2_13fec4001 (XEN) l4 = ffff83013fec4000 (XEN) l4_index = 0 (XEN) l4[0] = 13fec1003 (XEN) l3 = ffff83013fec1000 (XEN) l3_index = 2 (XEN) l3[2] = 13ccbe003 (XEN) l2 = ffff83013ccbe000 (XEN) l2_index = 1fa (XEN) l2[1fa] = 13cac3003 (XEN) l1 = ffff83013cac3000 (XEN) l1_index = 17b (XEN) l1[17b] = 0 (XEN) l1[17b] not present ata2.00: exception Emask 0x60 SAct 0x1 SErr 0x800 action 0x6 frozen ata2.00: irq_stat 0x20000000, host bus error ata2: SError: { HostInt } ata2.00: failed command: WRITE FPDMA QUEUED ata2.00: cmd 61/80:00:c3:aa:a0/00:00:0c:00:00/40 tag 0 ncq 65536 out res 40/00:04:c3:aa:a0/00:00:0c:00:00/40 Emask 0x60 (host bus error) ata2.00: status: { DRDY } ata2: hard resetting link ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata2.00: configured for UDMA/133 sd 1:0:0:0: [sdb] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE sd 1:0:0:0: [sdb] Sense Key : Aborted Command [current] [descriptor] Descriptor sense data with sense descriptors (in hex): 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 0c a0 aa c3 sd 1:0:0:0: [sdb] Add. Sense: No additional sense information sd 1:0:0:0: [sdb] CDB: Write(10): 2a 00 0c a0 aa c3 00 00 80 00 end_request: I/O error, dev sdb, sector 211856067 raid10: Disk failure on sdb3, disabling device. raid10: Operation continuing on 3 devices. ata2: EH complete unknown partition table md: md0: resync done. md: checkpointing resync of md0. RAID10 conf printout: --- wd:3 rd:4 disk 0, wo:0, o:1, dev:sda3 disk 1, wo:1, o:0, dev:sdb3 disk 2, wo:0, o:1, dev:sdc3 disk 3, wo:0, o:1, dev:sdd3 RAID10 conf printout: --- wd:3 rd:4 disk 0, wo:0, o:1, dev:sda3 disk 2, wo:0, o:1, dev:sdc3 disk 3, wo:0, o:1, dev:sdd3 md: resync of RAID array md0 md: minimum _guaranteed_ speed: 1000 KB/sec/disk. md: using maximum available idle IO bandwidth (but not more than 200000 KB/sec) for resync. md: using 128k window, over a total of 819199872 blocks. md: resuming resync of md0 from checkpoint. (XEN) [VT-D]iommu.c:821: iommu_fault_status: Primary Pending Fault (XEN) [VT-D]iommu.c:796: DMAR:[DMA Write] Request device [00:1f.2] fault addr bf578000, iommu reg = ffff82c3fff57000 (XEN) DMAR:[fault reason 05h] PTE Write access is not set (XEN) print_vtd_entries: iommu = ffff83013fff3e80 bdf = 0:1f.2 gmfn = bf578 (XEN) root_entry = ffff83013ff36000 (XEN) root_entry[0] = 13c6bb001 (XEN) context = ffff83013c6bb000 (XEN) context[fa] = 2_13fec4001 (XEN) l4 = ffff83013fec4000 (XEN) l4_index = 0 (XEN) l4[0] = 13fec1003 (XEN) l3 = ffff83013fec1000 (XEN) l3_index = 2 (XEN) l3[2] = 13ccbe003 (XEN) l2 = ffff83013ccbe000 (XEN) l2_index = 1fa (XEN) l2[1fa] = 13cac3003 (XEN) l1 = ffff83013cac3000 (XEN) l1_index = 178 (XEN) l1[178] = 0 (XEN) l1[178] not present (XEN) [VT-D]iommu.c:796: DMAR:[DMA Write] Request device [00:1f.2] fault addr bf579000, iommu reg = ffff82c3fff57000 (XEN) DMAR:[fault reason 05h] PTE Write access is not set (XEN) print_vtd_entries: iommu = ffff83013fff3e80 bdf = 0:1f.2 gmfn = bf579 (XEN) root_entry = ffff83013ff36000 (XEN) root_entry[0] = 13c6bb001 (XEN) context = ffff83013c6bb000 (XEN) context[fa] = 2_13fec4001 (XEN) l4 = ffff83013fec4000 (XEN) l4_index = 0 (XEN) l4[0] = 13fec1003 (XEN) l3 = ffff83013fec1000 (XEN) l3_index = 2 (XEN) l3[2] = 13ccbe003 (XEN) l2 = ffff83013ccbe000 (XEN) l2_index = 1fa (XEN) l2[1fa] = 13cac3003 (XEN) l1 = ffff83013cac3000 (XEN) l1_index = 179 (XEN) l1[179] = 0 (XEN) l1[179] not present (XEN) [VT-D]iommu.c:821: iommu_fault_status: Primary Pending Fault (XEN) [VT-D]iommu.c:796: DMAR:[DMA Write] Request device [00:1f.2] fault addr bf57b000, iommu reg = ffff82c3fff57000 (XEN) DMAR:[fault reason 05h] PTE Write access is not set (XEN) print_vtd_entries: iommu = ffff83013fff3e80 bdf = 0:1f.2 gmfn = bf57b (XEN) root_entry = ffff83013ff36000 (XEN) root_entry[0] = 13c6bb001 (XEN) context = ffff83013c6bb000 (XEN) context[fa] = 2_13fec4001 (XEN) l4 = ffff83013fec4000 (XEN) l4_index = 0 (XEN) l4[0] = 13fec1003 (XEN) l3 = ffff83013fec1000 (XEN) l3_index = 2 (XEN) l3[2] = 13ccbe003 (XEN) l2 = ffff83013ccbe000 (XEN) l2_index = 1fa (XEN) l2[1fa] = 13cac3003 (XEN) l1 = ffff83013cac3000 (XEN) l1_index = 17b (XEN) l1[17b] = 0 (XEN) l1[17b] not present (XEN) [VT-D]iommu.c:796: DMAR:[DMA Write] Request device [00:1f.2] fault addr bf57b000, iommu reg = ffff82c3fff57000 (XEN) DMAR:[fault reason 05h] PTE Write access is not set (XEN) print_vtd_entries: iommu = ffff83013fff3e80 bdf = 0:1f.2 gmfn = bf57b (XEN) root_entry = ffff83013ff36000 (XEN) root_entry[0] = 13c6bb001 (XEN) context = ffff83013c6bb000 (XEN) context[fa] = 2_13fec4001 (XEN) l4 = ffff83013fec4000 (XEN) l4_index = 0 (XEN) l4[0] = 13fec1003 (XEN) l3 = ffff83013fec1000 (XEN) l3_index = 2 (XEN) l3[2] = 13ccbe003 (XEN) l2 = ffff83013ccbe000 (XEN) l2_index = 1fa (XEN) l2[1fa] = 13cac3003 (XEN) l1 = ffff83013cac3000 (XEN) l1_index = 17b (XEN) l1[17b] = 0 (XEN) l1[17b] not present (XEN) [VT-D]iommu.c:821: iommu_fault_status: Primary Pending Fault (XEN) [VT-D]iommu.c:796: DMAR:[DMA Read] Request device [00:1f.2] fault addr bf57b000, iommu reg = ffff82c3fff57000 (XEN) DMAR:[fault reason 06h] PTE Read access is not set (XEN) print_vtd_entries: iommu = ffff83013fff3e80 bdf = 0:1f.2 gmfn = bf57b (XEN) root_entry = ffff83013ff36000 (XEN) root_entry[0] = 13c6bb001 (XEN) context = ffff83013c6bb000 (XEN) context[fa] = 2_13fec4001 (XEN) l4 = ffff83013fec4000 (XEN) l4_index = 0 (XEN) l4[0] = 13fec1003 (XEN) l3 = ffff83013fec1000 (XEN) l3_index = 2 (XEN) l3[2] = 13ccbe003 (XEN) l2 = ffff83013ccbe000 (XEN) l2_index = 1fa (XEN) l2[1fa] = 13cac3003 (XEN) l1 = ffff83013cac3000 (XEN) l1_index = 17b (XEN) l1[17b] = 0 (XEN) l1[17b] not present ata4.00: exception Emask 0x60 SAct 0x1 SErr 0x800 action 0x6 frozen ata4.00: irq_stat 0x20000000, host bus error ata4: SError: { HostInt } ata4.00: failed command: WRITE FPDMA QUEUED ata4.00: cmd 61/80:00:43:b2:a1/00:00:0c:00:00/40 tag 0 ncq 65536 out res 40/00:04:43:b2:a1/00:00:0c:00:00/40 Emask 0x60 (host bus error) ata4.00: status: { DRDY } ata4: hard resetting link ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata4.00: configured for UDMA/133 ata4: EH complete (XEN) [VT-D]iommu.c:821: iommu_fault_status: Primary Pending Fault (XEN) [VT-D]iommu.c:796: DMAR:[DMA Read] Request device [00:1f.2] fault addr bf578000, iommu reg = ffff82c3fff57000 (XEN) DMAR:[fault reason 06h] PTE Read access is not set (XEN) print_vtd_entries: iommu = ffff83013fff3e80 bdf = 0:1f.2 gmfn = bf578 (XEN) root_entry = ffff83013ff36000 (XEN) root_entry[0] = 13c6bb001 (XEN) context = ffff83013c6bb000 (XEN) context[fa] = 2_13fec4001 (XEN) l4 = ffff83013fec4000 (XEN) l4_index = 0 (XEN) l4[0] = 13fec1003 (XEN) l3 = ffff83013fec1000 (XEN) l3_index = 2 (XEN) l3[2] = 13ccbe003 (XEN) l2 = ffff83013ccbe000 (XEN) l2_index = 1fa (XEN) l2[1fa] = 13cac3003 (XEN) l1 = ffff83013cac3000 (XEN) l1_index = 178 (XEN) l1[178] = 0 (XEN) l1[178] not present ata4.00: exception Emask 0x60 SAct 0x3 SErr 0x800 action 0x6 frozen ata4.00: irq_stat 0x20000000, host bus error ata4: SError: { HostInt } ata4.00: failed command: WRITE FPDMA QUEUED ata4.00: cmd 61/80:00:43:b2:a1/00:00:0c:00:00/40 tag 0 ncq 65536 out res 40/00:0c:43:b1:a1/00:00:0c:00:00/40 Emask 0x60 (host bus error) ata4.00: status: { DRDY } ata4.00: failed command: WRITE FPDMA QUEUED ata4.00: cmd 61/80:08:43:b1:a1/00:00:0c:00:00/40 tag 1 ncq 65536 out res 40/00:0c:43:b1:a1/00:00:0c:00:00/40 Emask 0x60 (host bus error) ata4.00: status: { DRDY } ata4: hard resetting link ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata4.00: configured for UDMA/133 ata4: EH complete (XEN) [VT-D]iommu.c:821: iommu_fault_status: Primary Pending Fault (XEN) [VT-D]iommu.c:796: DMAR:[DMA Read] Request device [00:1f.2] fault addr bf578000, iommu reg = ffff82c3fff57000 (XEN) DMAR:[fault reason 06h] PTE Read access is not set (XEN) print_vtd_entries: iommu = ffff83013fff3e80 bdf = 0:1f.2 gmfn = bf578 (XEN) root_entry = ffff83013ff36000 (XEN) root_entry[0] = 13c6bb001 (XEN) context = ffff83013c6bb000 (XEN) context[fa] = 2_13fec4001 (XEN) l4 = ffff83013fec4000 (XEN) l4_index = 0 (XEN) l4[0] = 13fec1003 (XEN) l3 = ffff83013fec1000 (XEN) l3_index = 2 (XEN) l3[2] = 13ccbe003 (XEN) l2 = ffff83013ccbe000 (XEN) l2_index = 1fa (XEN) l2[1fa] = 13cac3003 (XEN) l1 = ffff83013cac3000 (XEN) l1_index = 178 (XEN) l1[178] = 0 (XEN) l1[178] not present ata4.00: exception Emask 0x60 SAct 0x3 SErr 0x800 action 0x6 frozen ata4.00: irq_stat 0x20000000, host bus error ata4: SError: { HostInt } ata4.00: failed command: WRITE FPDMA QUEUED ata4.00: cmd 61/80:00:43:b1:a1/00:00:0c:00:00/40 tag 0 ncq 65536 out res 40/00:0c:43:b2:a1/00:00:0c:00:00/40 Emask 0x60 (host bus error) ata4.00: status: { DRDY } ata4.00: failed command: WRITE FPDMA QUEUED ata4.00: cmd 61/80:08:43:b2:a1/00:00:0c:00:00/40 tag 1 ncq 65536 out res 40/00:0c:43:b2:a1/00:00:0c:00:00/40 Emask 0x60 (host bus error) ata4.00: status: { DRDY } ata4: hard resetting link ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata4.00: configured for UDMA/133 ata4: EH complete (XEN) [VT-D]iommu.c:821: iommu_fault_status: Primary Pending Fault (XEN) [VT-D]iommu.c:796: DMAR:[DMA Read] Request device [00:1f.2] fault addr bf578000, iommu reg = ffff82c3fff57000 (XEN) DMAR:[fault reason 06h] PTE Read access is not set (XEN) print_vtd_entries: iommu = ffff83013fff3e80 bdf = 0:1f.2 gmfn = bf578 (XEN) root_entry = ffff83013ff36000 (XEN) root_entry[0] = 13c6bb001 (XEN) context = ffff83013c6bb000 (XEN) context[fa] = 2_13fec4001 (XEN) l4 = ffff83013fec4000 (XEN) l4_index = 0 (XEN) l4[0] = 13fec1003 (XEN) l3 = ffff83013fec1000 (XEN) l3_index = 2 (XEN) l3[2] = 13ccbe003 (XEN) l2 = ffff83013ccbe000 (XEN) l2_index = 1fa (XEN) l2[1fa] = 13cac3003 (XEN) l1 = ffff83013cac3000 (XEN) l1_index = 178 (XEN) l1[178] = 0 (XEN) l1[178] not present ata4.00: exception Emask 0x60 SAct 0x3f SErr 0x800 action 0x6 frozen ata4.00: irq_stat 0x20000000, host bus error ata4: SError: { HostInt } ata4.00: failed command: WRITE FPDMA QUEUED ata4.00: cmd 61/80:00:43:b2:a1/00:00:0c:00:00/40 tag 0 ncq 65536 out res 40/00:2c:43:39:a2/00:00:0c:00:00/40 Emask 0x60 (host bus error) ata4.00: status: { DRDY } ata4.00: failed command: WRITE FPDMA QUEUED ata4.00: cmd 61/80:08:43:b1:a1/00:00:0c:00:00/40 tag 1 ncq 65536 out res 40/00:2c:43:39:a2/00:00:0c:00:00/40 Emask 0x60 (host bus error) ata4.00: status: { DRDY } ata4.00: failed command: READ FPDMA QUEUED ata4.00: cmd 60/00:10:43:2d:a2/04:00:0c:00:00/40 tag 2 ncq 524288 in res 40/00:2c:43:39:a2/00:00:0c:00:00/40 Emask 0x60 (host bus error) ata4.00: status: { DRDY } ata4.00: failed command: READ FPDMA QUEUED ata4.00: cmd 60/00:18:43:31:a2/04:00:0c:00:00/40 tag 3 ncq 524288 in res 40/00:2c:43:39:a2/00:00:0c:00:00/40 Emask 0x60 (host bus error) ata4.00: status: { DRDY } ata4.00: failed command: READ FPDMA QUEUED ata4.00: cmd 60/00:20:43:35:a2/04:00:0c:00:00/40 tag 4 ncq 524288 in res 40/00:2c:43:39:a2/00:00:0c:00:00/40 Emask 0x60 (host bus error) ata4.00: status: { DRDY } ata4.00: failed command: READ FPDMA QUEUED ata4.00: cmd 60/00:28:43:39:a2/04:00:0c:00:00/40 tag 5 ncq 524288 in res 40/00:2c:43:39:a2/00:00:0c:00:00/40 Emask 0x60 (host bus error) ata4.00: status: { DRDY } ata4: hard resetting link ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata4.00: configured for UDMA/133 ata4: EH complete (XEN) [VT-D]iommu.c:821: iommu_fault_status: Primary Pending Fault (XEN) [VT-D]iommu.c:796: DMAR:[DMA Read] Request device [00:1f.2] fault addr bf578000, iommu reg = ffff82c3fff57000 (XEN) DMAR:[fault reason 06h] PTE Read access is not set (XEN) print_vtd_entries: iommu = ffff83013fff3e80 bdf = 0:1f.2 gmfn = bf578 (XEN) root_entry = ffff83013ff36000 (XEN) root_entry[0] = 13c6bb001 (XEN) context = ffff83013c6bb000 (XEN) context[fa] = 2_13fec4001 (XEN) l4 = ffff83013fec4000 (XEN) l4_index = 0 (XEN) l4[0] = 13fec1003 (XEN) l3 = ffff83013fec1000 (XEN) l3_index = 2 (XEN) l3[2] = 13ccbe003 (XEN) l2 = ffff83013ccbe000 (XEN) l2_index = 1fa (XEN) l2[1fa] = 13cac3003 (XEN) l1 = ffff83013cac3000 (XEN) l1_index = 178 (XEN) l1[178] = 0 (XEN) l1[178] not present ata4.00: exception Emask 0x60 SAct 0x3f SErr 0x800 action 0x6 frozen ata4.00: irq_stat 0x20000000, host bus error ata4: SError: { HostInt } ata4.00: failed command: READ FPDMA QUEUED ata4.00: cmd 60/00:00:43:39:a2/04:00:0c:00:00/40 tag 0 ncq 524288 in res 40/00:2c:43:b2:a1/00:00:0c:00:00/40 Emask 0x60 (host bus error) ata4.00: status: { DRDY } ata4.00: failed command: READ FPDMA QUEUED ata4.00: cmd 60/00:08:43:35:a2/04:00:0c:00:00/40 tag 1 ncq 524288 in res 40/00:2c:43:b2:a1/00:00:0c:00:00/40 Emask 0x60 (host bus error) ata4.00: status: { DRDY } ata4.00: failed command: READ FPDMA QUEUED ata4.00: cmd 60/00:10:43:31:a2/04:00:0c:00:00/40 tag 2 ncq 524288 in res 40/00:2c:43:b2:a1/00:00:0c:00:00/40 Emask 0x60 (host bus error) ata4.00: status: { DRDY } ata4.00: failed command: READ FPDMA QUEUED ata4.00: cmd 60/00:18:43:2d:a2/04:00:0c:00:00/40 tag 3 ncq 524288 in res 40/00:2c:43:b2:a1/00:00:0c:00:00/40 Emask 0x60 (host bus error) ata4.00: status: { DRDY } ata4.00: failed command: WRITE FPDMA QUEUED ata4.00: cmd 61/80:20:43:b1:a1/00:00:0c:00:00/40 tag 4 ncq 65536 out res 40/00:2c:43:b2:a1/00:00:0c:00:00/40 Emask 0x60 (host bus error) ata4.00: status: { DRDY } ata4.00: failed command: WRITE FPDMA QUEUED ata4.00: cmd 61/80:28:43:b2:a1/00:00:0c:00:00/40 tag 5 ncq 65536 out res 40/00:2c:43:b2:a1/00:00:0c:00:00/40 Emask 0x60 (host bus error) ata4.00: status: { DRDY } ata4: hard resetting link ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata4.00: configured for UDMA/133 ata4: EH complete (XEN) [VT-D]iommu.c:821: iommu_fault_status: Primary Pending Fault (XEN) [VT-D]iommu.c:796: DMAR:[DMA Read] Request device [00:1f.2] fault addr bf578000, iommu reg = ffff82c3fff57000 (XEN) DMAR:[fault reason 06h] PTE Read access is not set (XEN) print_vtd_entries: iommu = ffff83013fff3e80 bdf = 0:1f.2 gmfn = bf578 (XEN) root_entry = ffff83013ff36000 (XEN) root_entry[0] = 13c6bb001 (XEN) context = ffff83013c6bb000 (XEN) context[fa] = 2_13fec4001 (XEN) l4 = ffff83013fec4000 (XEN) l4_index = 0 (XEN) l4[0] = 13fec1003 (XEN) l3 = ffff83013fec1000 (XEN) l3_index = 2 (XEN) l3[2] = 13ccbe003 (XEN) l2 = ffff83013ccbe000 (XEN) l2_index = 1fa (XEN) l2[1fa] = 13cac3003 (XEN) l1 = ffff83013cac3000 (XEN) l1_index = 178 (XEN) l1[178] = 0 (XEN) l1[178] not present ata4.00: exception Emask 0x60 SAct 0x3f SErr 0x800 action 0x6 frozen ata4.00: irq_stat 0x20000000, host bus error ata4: SError: { HostInt } ata4.00: failed command: WRITE FPDMA QUEUED ata4.00: cmd 61/80:00:43:b2:a1/00:00:0c:00:00/40 tag 0 ncq 65536 out res 40/00:2c:43:39:a2/00:00:0c:00:00/40 Emask 0x60 (host bus error) ata4.00: status: { DRDY } ata4.00: failed command: WRITE FPDMA QUEUED ata4.00: cmd 61/80:08:43:b1:a1/00:00:0c:00:00/40 tag 1 ncq 65536 out res 40/00:2c:43:39:a2/00:00:0c:00:00/40 Emask 0x60 (host bus error) ata4.00: status: { DRDY } ata4.00: failed command: READ FPDMA QUEUED ata4.00: cmd 60/00:10:43:2d:a2/04:00:0c:00:00/40 tag 2 ncq 524288 in res 40/00:2c:43:39:a2/00:00:0c:00:00/40 Emask 0x60 (host bus error) ata4.00: status: { DRDY } ata4.00: failed command: READ FPDMA QUEUED ata4.00: cmd 60/00:18:43:31:a2/04:00:0c:00:00/40 tag 3 ncq 524288 in res 40/00:2c:43:39:a2/00:00:0c:00:00/40 Emask 0x60 (host bus error) ata4.00: status: { DRDY } ata4.00: failed command: READ FPDMA QUEUED ata4.00: cmd 60/00:20:43:35:a2/04:00:0c:00:00/40 tag 4 ncq 524288 in res 40/00:2c:43:39:a2/00:00:0c:00:00/40 Emask 0x60 (host bus error) ata4.00: status: { DRDY } ata4.00: failed command: READ FPDMA QUEUED ata4.00: cmd 60/00:28:43:39:a2/04:00:0c:00:00/40 tag 5 ncq 524288 in res 40/00:2c:43:39:a2/00:00:0c:00:00/40 Emask 0x60 (host bus error) ata4.00: status: { DRDY } ata4: hard resetting link ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata4.00: configured for UDMA/133 sd 3:0:0:0: [sdd] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE sd 3:0:0:0: [sdd] Sense Key : Aborted Command [current] [descriptor] Descriptor sense data with sense descriptors (in hex): 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 0c a2 39 43 sd 3:0:0:0: [sdd] Add. Sense: No additional sense information sd 3:0:0:0: [sdd] CDB: Write(10): 2a 00 0c a1 b2 43 00 00 80 00 end_request: I/O error, dev sdd, sector 211923523 raid10: Disk failure on sdd3, disabling device. raid10: Operation continuing on 2 devices. ata4: EH complete md: md0: resync done. (XEN) [VT-D]iommu.c:821: iommu_fault_status: Primary Pending Fault (XEN) [VT-D]iommu.c:796: DMAR:[DMA Read] Request device [00:1f.2] fault addr bf578000, iommu reg = ffff82c3fff57000 (XEN) DMAR:[fault reason 06h] PTE Read access is not set (XEN) print_vtd_entries: iommu = ffff83013fff3e80 bdf = 0:1f.2 gmfn = bf578 (XEN) root_entry = ffff83013ff36000 (XEN) root_entry[0] = 13c6bb001 (XEN) context = ffff83013c6bb000 (XEN) context[fa] = 2_13fec4001 (XEN) l4 = ffff83013fec4000 (XEN) l4_index = 0 (XEN) l4[0] = 13fec1003 (XEN) l3 = ffff83013fec1000 (XEN) l3_index = 2 (XEN) l3[2] = 13ccbe003 (XEN) l2 = ffff83013ccbe000 (XEN) l2_index = 1fa (XEN) l2[1fa] = 13cac3003 (XEN) l1 = ffff83013cac3000 (XEN) l1_index = 178 (XEN) l1[178] = 0 (XEN) l1[178] not present ata4.00: exception Emask 0x60 SAct 0x1f SErr 0x800 action 0x6 frozen ata4.00: irq_stat 0x20000000, host bus error ata4: SError: { HostInt } ata4.00: failed command: READ FPDMA QUEUED ata4.00: cmd 60/00:00:43:39:a2/04:00:0c:00:00/40 tag 0 ncq 524288 in res 40/00:24:43:b1:a1/00:00:0c:00:00/40 Emask 0x60 (host bus error) ata4.00: status: { DRDY } ata4.00: failed command: READ FPDMA QUEUED ata4.00: cmd 60/00:08:43:35:a2/04:00:0c:00:00/40 tag 1 ncq 524288 in res 40/00:24:43:b1:a1/00:00:0c:00:00/40 Emask 0x60 (host bus error) ata4.00: status: { DRDY } ata4.00: failed command: READ FPDMA QUEUED ata4.00: cmd 60/00:10:43:31:a2/04:00:0c:00:00/40 tag 2 ncq 524288 in res 40/00:24:43:b1:a1/00:00:0c:00:00/40 Emask 0x60 (host bus error) ata4.00: status: { DRDY } ata4.00: failed command: READ FPDMA QUEUED ata4.00: cmd 60/00:18:43:2d:a2/04:00:0c:00:00/40 tag 3 ncq 524288 in res 40/00:24:43:b1:a1/00:00:0c:00:00/40 Emask 0x60 (host bus error) ata4.00: status: { DRDY } ata4.00: failed command: WRITE FPDMA QUEUED ata4.00: cmd 61/80:20:43:b1:a1/00:00:0c:00:00/40 tag 4 ncq 65536 out res 40/00:24:43:b1:a1/00:00:0c:00:00/40 Emask 0x60 (host bus error) ata4.00: status: { DRDY } ata4: hard resetting link ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata4.00: configured for UDMA/133 sd 3:0:0:0: [sdd] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE sd 3:0:0:0: [sdd] Sense Key : Aborted Command [current] [descriptor] Descriptor sense data with sense descriptors (in hex): 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 0c a1 b1 43 sd 3:0:0:0: [sdd] Add. Sense: No additional sense information sd 3:0:0:0: [sdd] CDB: Write(10): 2a 00 0c a1 b1 43 00 00 80 00 end_request: I/O error, dev sdd, sector 211923267 ata4: EH complete md: checkpointing resync of md0. RAID10 conf printout: --- wd:2 rd:4 disk 0, wo:0, o:1, dev:sda3 disk 2, wo:0, o:1, dev:sdc3 disk 3, wo:1, o:0, dev:sdd3 RAID10 conf printout: --- wd:2 rd:4 disk 0, wo:0, o:1, dev:sda3 disk 2, wo:0, o:1, dev:sdc3 md: resync of RAID array md0 md: minimum _guaranteed_ speed: 1000 KB/sec/disk. md: using maximum available idle IO bandwidth (but not more than 200000 KB/sec) for resync. md: using 128k window, over a total of 819199872 blocks. md: resuming resync of md0 from checkpoint. md: md0: resync done. RAID10 conf printout: --- wd:2 rd:4 disk 0, wo:0, o:1, dev:sda3 disk 2, wo:0, o:1, dev:sdc3 ========================================================================= __ __ _ _ _ _ _ _ \ \/ /___ _ __ | || | / | _ _ _ __ ___| |_ __ _| |__ | | ___ \ // _ \ '_ \ | || |_ | |__| | | | '_ \/ __| __/ _` | '_ \| |/ _ \ / \ __/ | | | |__ _|| |__| |_| | | | \__ \ || (_| | |_) | | __/ /_/\_\___|_| |_| |_|(_)_| \__,_|_| |_|___/\__\__,_|_.__/|_|\___| (XEN) Xen version 4.1-unstable (jeremy@) (gcc version 4.4.3 20100127 (Red Hat 4.4.3-4) (GCC) ) Tue Apr 6 17:23:29 PDT 2010 (XEN) Latest ChangeSet: Tue Apr 06 17:23:12 2010 -0700 21115:ea6c67dc4577 (XEN) Command line: com2=115200,8n1,0x3e8,5 console=com2,vga cpufreq=xen iommu=verbose (XEN) Video information: (XEN) VGA is text mode 80x25, font 8x16 (XEN) VBE/DDC methods: none; EDID transfer time: 0 seconds (XEN) EDID info not retrieved because no DDC retrieval method detected (XEN) Disc information: (XEN) Found 4 MBR signatures (XEN) Found 4 EDD information structures (XEN) Xen-e820 RAM map: (XEN) 0000000000000000 - 000000000009d800 (usable) (XEN) 000000000009d800 - 00000000000a0000 (reserved) (XEN) 00000000000e0000 - 0000000000100000 (reserved) (XEN) 0000000000100000 - 00000000bf790000 (usable) (XEN) 00000000bf79e000 - 00000000bf7a0000 type 9 (XEN) 00000000bf7a0000 - 00000000bf7ae000 (ACPI data) (XEN) 00000000bf7ae000 - 00000000bf7d0000 (ACPI NVS) (XEN) 00000000bf7d0000 - 00000000bf7e0000 (reserved) (XEN) 00000000bf7ed000 - 00000000c0000000 (reserved) (XEN) 00000000e0000000 - 00000000f0000000 (reserved) (XEN) 00000000fed20000 - 00000000fed40000 (reserved) (XEN) 00000000fee00000 - 00000000fee01000 (reserved) (XEN) 0000000100000000 - 0000000140000000 (usable) (XEN) ACPI: RSDP 000FA110, 0024 (r2 ACPIAM) (XEN) ACPI: XSDT BF7A0100, 0084 (r1 SMCI 20100225 MSFT 97) (XEN) ACPI: FACP BF7A0290, 00F4 (r4 022510 FACP1918 20100225 MSFT 97) (XEN) ACPI: DSDT BF7A05F0, 6C55 (r2 10605 10605000 0 INTL 20051117) (XEN) ACPI: FACS BF7AE000, 0040 (XEN) ACPI: APIC BF7A0390, 0092 (r2 022510 APIC1918 20100225 MSFT 97) (XEN) ACPI: MCFG BF7A0430, 003C (r1 022510 OEMMCFG 20100225 MSFT 97) (XEN) ACPI: OEMB BF7AE040, 0073 (r1 022510 OEMB1918 20100225 MSFT 97) (XEN) ACPI: HPET BF7AA5F0, 0038 (r1 022510 OEMHPET 20100225 MSFT 97) (XEN) ACPI: GSCI BF7AE0C0, 2024 (r1 022510 GMCHSCI 20100225 MSFT 97) (XEN) ACPI: DMAR BF7B00F0, 0090 (r1 AMI OEMDMAR 1 MSFT 97) (XEN) ACPI: SSDT BF7B1580, 0363 (r1 DpgPmm CpuPm 12 INTL 20051117) (XEN) ACPI: EINJ BF7AA630, 0130 (r1 AMIER AMI_EINJ 20100225 MSFT 97) (XEN) ACPI: BERT BF7AA7C0, 0030 (r1 AMIER AMI_BERT 20100225 MSFT 97) (XEN) ACPI: ERST BF7AA7F0, 01B0 (r1 AMIER AMI_ERST 20100225 MSFT 97) (XEN) ACPI: HEST BF7AA9A0, 00A8 (r1 AMIER ABC_HEST 20100225 MSFT 97) (XEN) System RAM: 4056MB (4153584kB) (XEN) No NUMA configuration found (XEN) Faking a node at 0000000000000000-0000000140000000 (XEN) Domain heap initialised (XEN) found SMP MP-table at 000ff780 (XEN) DMI present. (XEN) Using APIC driver default (XEN) ACPI: PM-Timer IO Port: 0x808 (XEN) ACPI: ACPI SLEEP INFO: pm1x_cnt[804,0], pm1x_evt[800,0] (XEN) ACPI: wakeup_vec[bf7ae00c], vec_size[20] (XEN) ACPI: Local APIC address 0xfee00000 (XEN) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) (XEN) Processor #0 7:14 APIC version 21 (XEN) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) (XEN) Processor #2 7:14 APIC version 21 (XEN) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled) (XEN) Processor #4 7:14 APIC version 21 (XEN) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled) (XEN) Processor #6 7:14 APIC version 21 (XEN) ACPI: LAPIC (acpi_id[0x05] lapic_id[0x84] disabled) (XEN) ACPI: LAPIC (acpi_id[0x06] lapic_id[0x85] disabled) (XEN) ACPI: LAPIC (acpi_id[0x07] lapic_id[0x86] disabled) (XEN) ACPI: LAPIC (acpi_id[0x08] lapic_id[0x87] disabled) (XEN) ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) (XEN) ACPI: IOAPIC (id[0x07] address[0xfec00000] gsi_base[0]) (XEN) IOAPIC[0]: apic_id 7, version 32, address 0xfec00000, GSI 0-23 (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) (XEN) ACPI: IRQ0 used by override. (XEN) ACPI: IRQ2 used by override. (XEN) ACPI: IRQ9 used by override. (XEN) Enabling APIC mode: Flat. Using 1 I/O APICs (XEN) ACPI: HPET id: 0x8086a701 base: 0xfed00000 (XEN) [VT-D]dmar.c:679: Host address width 36 (XEN) [VT-D]dmar.c:694: found ACPI_DMAR_DRHD: (XEN) [VT-D]dmar.c:398: dmaru->address = fed90000 (XEN) [VT-D]dmar.c:411: flags: INCLUDE_ALL (XEN) [VT-D]dmar.c:699: found ACPI_DMAR_RMRR: (XEN) [VT-D]dmar.c:334: endpoint: 0:1d.0 (XEN) [VT-D]dmar.c:334: endpoint: 0:1a.0 (XEN) [VT-D]dmar.c:571: RMRR region: base_addr ed000 end_address effff (XEN) [VT-D]dmar.c:699: found ACPI_DMAR_RMRR: (XEN) [VT-D]dmar.c:334: endpoint: 0:1d.0 (XEN) [VT-D]dmar.c:334: endpoint: 0:1a.0 (XEN) [VT-D]dmar.c:571: RMRR region: base_addr bf7ed000 end_address bf7fffff (XEN) PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 (XEN) PCI: MCFG area at e0000000 reserved in E820 (XEN) Using ACPI (MADT) for SMP configuration information (XEN) Using scheduler: SMP Credit Scheduler (credit) (XEN) Detected 2400.063 MHz processor. (XEN) Initing memory sharing. (XEN) EPT support 2M super page. (XEN) VMX: Supported advanced features: (XEN) - APIC MMIO access virtualisation (XEN) - APIC TPR shadow (XEN) - Extended Page Tables (EPT) (XEN) - Virtual-Processor Identifiers (VPID) (XEN) - Virtual NMI (XEN) - MSR direct-access bitmap (XEN) HVM: ASIDs enabled. (XEN) HVM: VMX enabled (XEN) HVM: Hardware Assisted Paging detected. (XEN) Intel machine check reporting enabled (XEN) [VT-D]iommu.c:1078: drhd->address = fed90000 iommu->reg = ffff82c3fff57000 (XEN) [VT-D]iommu.c:1080: cap = c90780106f0462 ecap = f020e3 (XEN) Intel VT-d Snoop Control supported. (XEN) Intel VT-d DMA Passthrough not supported. (XEN) Intel VT-d Queued Invalidation supported. (XEN) Intel VT-d Interrupt Remapping not supported. (XEN) I/O virtualisation enabled (XEN) I/O virtualisation for PV guests disabled (XEN) EPT support 2M super page. (XEN) EPT support 2M super page. (XEN) EPT support 2M super page. (XEN) Total of 4 processors activated. (XEN) ENABLING IO-APIC IRQs (XEN) -> Using new ACK method (XEN) ..TIMER: vector=0xF0 apic1=0 pin1=2 apic2=-1 pin2=-1 (XEN) TSC is reliable, synchronization unnecessary (XEN) Platform timer is 14.318MHz HPET �(XEN) Allocated console ring of 32 KiB. (XEN) microcode.c:73:d32767 microcode: CPU1 resumed (XEN) microcode.c:73:d32767 microcode: CPU2 resumed (XEN) Brought up 4 CPUs (XEN) microcode.c:73:d32767 microcode: CPU3 resumed (XEN) Turbo Mode detected! (XEN) HPET: 8 timers in total, 8 timers will be used for broadcast (XEN) ACPI sleep modes: S3 (XEN) mcheck_poll: Machine check polling timer started. (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 0:0.0 (XEN) [VT-D]iommu.c:1325: d0:PCIe: map bdf = 0:8.0 (XEN) [VT-D]iommu.c:1325: d0:PCIe: map bdf = 0:8.1 (XEN) [VT-D]iommu.c:1325: d0:PCIe: map bdf = 0:8.2 (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 0:8.3 (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 0:10.0 (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 0:10.1 (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 0:1a.0 (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 0:1d.0 (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 0:1f.0 (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 0:1f.2 (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 0:1f.3 (XEN) [VT-D]iommu.c:1325: d0:PCIe: map bdf = 3:0.0 (XEN) [VT-D]iommu.c:1325: d0:PCIe: map bdf = 4:0.0 (XEN) [VT-D]iommu.c:1325: d0:PCIe: map bdf = 5:0.0 (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 6:3.0 (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 6:3.1 (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 6:3.2 (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 6:3.3 (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 6:3.4 (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 6:3.5 (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 6:3.6 (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 6:3.7 (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = ff:0.0 (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = ff:0.1 (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = ff:2.0 (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = ff:2.1 (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = ff:3.0 (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = ff:3.1 (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = ff:3.2 (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = ff:3.4 (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = ff:4.0 (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = ff:4.1 (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = ff:4.2 (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = ff:4.3 (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = ff:5.0 (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = ff:5.1 (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = ff:5.2 (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = ff:5.3 (XEN) [VT-D]iommu.c:695: iommu_enable_translation: iommu->reg = ffff82c3fff57000 (XEN) *** LOADING DOMAIN 0 *** (XEN) elf_parse_binary: phdr: paddr=0x1000000 memsz=0x69c000 (XEN) elf_parse_binary: phdr: paddr=0x169c000 memsz=0xe3cb0 (XEN) elf_parse_binary: phdr: paddr=0x1780000 memsz=0x888 (XEN) elf_parse_binary: phdr: paddr=0x1781000 memsz=0x14498 (XEN) elf_parse_binary: phdr: paddr=0x1796000 memsz=0x9f5000 (XEN) elf_parse_binary: memory: 0x1000000 -> 0x218b000 (XEN) elf_xen_parse_note: GUEST_OS = "linux" (XEN) elf_xen_parse_note: GUEST_VERSION = "2.6" (XEN) elf_xen_parse_note: XEN_VERSION = "xen-3.0" (XEN) elf_xen_parse_note: VIRT_BASE = 0xffffffff80000000 (XEN) elf_xen_parse_note: ENTRY = 0xffffffff81796200 (XEN) elf_xen_parse_note: HYPERCALL_PAGE = 0xffffffff81009000 (XEN) elf_xen_parse_note: FEATURES = "!writable_page_tables|pae_pgdir_above_4gb" (XEN) elf_xen_parse_note: PAE_MODE = "yes" (XEN) elf_xen_parse_note: LOADER = "generic" (XEN) elf_xen_parse_note: unknown xen elf note (0xd) (XEN) elf_xen_parse_note: SUSPEND_CANCEL = 0x1 (XEN) elf_xen_parse_note: HV_START_LOW = 0xffff800000000000 (XEN) elf_xen_parse_note: PADDR_OFFSET = 0x0 (XEN) elf_xen_addr_calc_check: addresses: (XEN) virt_base = 0xffffffff80000000 (XEN) elf_paddr_offset = 0x0 (XEN) virt_offset = 0xffffffff80000000 (XEN) virt_kstart = 0xffffffff81000000 (XEN) virt_kend = 0xffffffff8218b000 (XEN) virt_entry = 0xffffffff81796200 (XEN) p2m_base = 0xffffffffffffffff (XEN) Xen kernel: 64-bit, lsb, compat32 (XEN) Dom0 kernel: 64-bit, PAE, lsb, paddr 0x1000000 -> 0x218b000 (XEN) PHYSICAL MEMORY ARRANGEMENT: (XEN) Dom0 alloc.: 0000000138000000->000000013c000000 (981633 pages to be allocated) (XEN) VIRTUAL MEMORY ARRANGEMENT: (XEN) Loaded kernel: ffffffff81000000->ffffffff8218b000 (XEN) Init. ramdisk: ffffffff8218b000->ffffffff82b69800 (XEN) Phys-Mach map: ffffffff82b6a000->ffffffff83307408 (XEN) Start info: ffffffff83308000->ffffffff833084b4 (XEN) Page tables: ffffffff83309000->ffffffff83326000 (XEN) Boot stack: ffffffff83326000->ffffffff83327000 (XEN) TOTAL: ffffffff80000000->ffffffff83400000 (XEN) ENTRY ADDRESS: ffffffff81796200 (XEN) Dom0 has maximum 4 VCPUs (XEN) elf_load_binary: phdr 0 at 0xffffffff81000000 -> 0xffffffff8169c000 (XEN) elf_load_binary: phdr 1 at 0xffffffff8169c000 -> 0xffffffff8177fcb0 (XEN) elf_load_binary: phdr 2 at 0xffffffff81780000 -> 0xffffffff81780888 (XEN) elf_load_binary: phdr 3 at 0xffffffff81781000 -> 0xffffffff81795498 (XEN) elf_load_binary: phdr 4 at 0xffffffff81796000 -> 0xffffffff81830000 (XEN) Scrubbing Free RAM: .done. (XEN) Xen trace buffers: disabled (XEN) Std. Loglevel: All (XEN) Guest Loglevel: All (XEN) Xen is relinquishing VGA console. (XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch input to Xen) (XEN) Freed 164kB init memory. mapping kernel into physical memory Xen: setup ISA identity maps about to get started... Initializing cgroup subsys cpuset Initializing cgroup subsys cpu Linux version 2.6.32.11 (jeremy@lilith.goop.org) (gcc version 4.4.3 20100127 (Red Hat 4.4.3-4) (GCC) ) #7 SMP PREEMPT Mon Apr 5 14:58:54 PDT 2010 Command line: ro root=/dev/mapper/vg_lilith--raid-root LANG=en_US.UTF-8 SYSFONT=latarcyrheb-sun16 KEYBOARDTYPE=pc KEYTABLE=us ignore_loglevel earlyprintk=xen console=hvc0 rdshell pcie_aspm=off KERNEL supported cpus: Intel GenuineIntel AMD AuthenticAMD Centaur CentaurHauls xen_release_chunk: looking at area pfn bf790-bf79e: 14 pages freed xen_release_chunk: looking at area pfn bf7e0-bf7ed: 13 pages freed xen_release_chunk: looking at area pfn c0000-e0000: 131072 pages freed xen_release_chunk: looking at area pfn f0000-fec00: 14977 pages freed xen_release_chunk: looking at area pfn fec01-fed20: 0 pages freed xen_release_chunk: looking at area pfn fed40-fee00: 0 pages freed released 146076 pages of unused memory BIOS-provided physical RAM map: Xen: 0000000000000000 - 000000000009d800 (usable) Xen: 000000000009d800 - 0000000000100000 (reserved) Xen: 0000000000100000 - 00000000bf790000 (usable) Xen: 00000000bf79e000 - 00000000bf7a0000 type 9 Xen: 00000000bf7a0000 - 00000000bf7ae000 (ACPI data) Xen: 00000000bf7ae000 - 00000000bf7d0000 (ACPI NVS) Xen: 00000000bf7d0000 - 00000000bf7e0000 (reserved) Xen: 00000000bf7ed000 - 00000000c0000000 (reserved) Xen: 00000000e0000000 - 00000000f0000000 (reserved) Xen: 00000000fec00000 - 00000000fec01000 (reserved) Xen: 00000000fed20000 - 00000000fed40000 (reserved) Xen: 00000000fee00000 - 00000000fee01000 (reserved) debug: ignoring loglevel setting. bootconsole [xenboot0] enabled DMI present. last_pfn = 0xbf790 max_arch_pfn = 0x400000000 x86 PAT enabled: cpu 0, old 0x50100070406, new 0x7010600070106 initial memory mapped : 0 - 20000000 init_memory_mapping: 0000000000000000-00000000bf790000 0000000000 - 00bf790000 page 4k kernel direct mapping tables up to bf790000 @ 100000-700000 RAMDISK: 0218b000 - 02b69800 ACPI: RSDP 00000000000fa110 00024 (v02 ACPIAM) ACPI: XSDT 00000000bf7a0100 00084 (v01 SMCI 20100225 MSFT 00000097) ACPI: FACP 00000000bf7a0290 000F4 (v04 022510 FACP1918 20100225 MSFT 00000097) ACPI: DSDT 00000000bf7a05f0 06C55 (v02 10605 10605000 00000000 INTL 20051117) ACPI: FACS 00000000bf7ae000 00040 ACPI: APIC 00000000bf7a0390 00092 (v02 022510 APIC1918 20100225 MSFT 00000097) ACPI: MCFG 00000000bf7a0430 0003C (v01 022510 OEMMCFG 20100225 MSFT 00000097) ACPI: OEMB 00000000bf7ae040 00073 (v01 022510 OEMB1918 20100225 MSFT 00000097) ACPI: HPET 00000000bf7aa5f0 00038 (v01 022510 OEMHPET 20100225 MSFT 00000097) ACPI: GSCI 00000000bf7ae0c0 02024 (v01 022510 GMCHSCI 20100225 MSFT 00000097) ACPI: 00000000bf7b00f0 00090 (v01 AMI OEMDMAR 00000001 MSFT 00000097) ACPI: SSDT 00000000bf7b1580 00363 (v01 DpgPmm CpuPm 00000012 INTL 20051117) ACPI: EINJ 00000000bf7aa630 00130 (v01 AMIER AMI_EINJ 20100225 MSFT 00000097) ACPI: BERT 00000000bf7aa7c0 00030 (v01 AMIER AMI_BERT 20100225 MSFT 00000097) ACPI: ERST 00000000bf7aa7f0 001B0 (v01 AMIER AMI_ERST 20100225 MSFT 00000097) ACPI: HEST 00000000bf7aa9a0 000A8 (v01 AMIER ABC_HEST 20100225 MSFT 00000097) ACPI: Local APIC address 0xfee00000 No NUMA configuration found Faking a node at 0000000000000000-00000000bf790000 Bootmem setup node 0 0000000000000000-00000000bf790000 NODE_DATA [0000000000001000 - 0000000000005fff] bootmap [0000000000008000 - 000000000001fef7] pages 18 (8 early reservations) ==> bootmem [0000000000 - 00bf790000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0003309000 - 0003326000] XEN PAGETABLES ==> [0003309000 - 0003326000] #2 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] #3 [0001000000 - 000216a048] TEXT DATA BSS ==> [0001000000 - 000216a048] #4 [000218b000 - 0002b69800] RAMDISK ==> [000218b000 - 0002b69800] #5 [0002b6a000 - 0003309000] XEN START INFO ==> [0002b6a000 - 0003309000] #6 [000216b000 - 000216b21b] BRK ==> [000216b000 - 000216b21b] #7 [0000100000 - 00006e0000] PGTABLE ==> [0000100000 - 00006e0000] found SMP MP-table at [ffff8800000ff780] ff780 Zone PFN ranges: DMA 0x00000000 -> 0x00001000 DMA32 0x00001000 -> 0x00100000 Normal 0x00100000 -> 0x00100000 Movable zone start PFN for each node early_node_map[2] active PFN ranges 0: 0x00000000 -> 0x0000009d 0: 0x00000100 -> 0x000bf790 On node 0 totalpages: 784173 DMA zone: 88 pages used for memmap DMA zone: 1507 pages reserved DMA zone: 2402 pages, LIFO batch:0 DMA32 zone: 16762 pages used for memmap DMA32 zone: 763414 pages, LIFO batch:31 ACPI: PM-Timer IO Port: 0x808 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled) ACPI: LAPIC (acpi_id[0x05] lapic_id[0x84] disabled) ACPI: LAPIC (acpi_id[0x06] lapic_id[0x85] disabled) ACPI: LAPIC (acpi_id[0x07] lapic_id[0x86] disabled) ACPI: LAPIC (acpi_id[0x08] lapic_id[0x87] disabled) ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) ACPI: IOAPIC (id[0x07] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 7, version 0, address 0xfec00000, GSI 0-0 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ERROR: Unable to locate IOAPIC for GSI 2 ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ERROR: Unable to locate IOAPIC for GSI 9 Using ACPI (MADT) for SMP configuration information ACPI: HPET id: 0x8086a701 base: 0xfed00000 SMP: Allowing 4 CPUs, 0 hotplug CPUs nr_irqs_gsi: 256 PM: Registered nosave memory: 000000000009d000 - 000000000009e000 PM: Registered nosave memory: 000000000009e000 - 0000000000100000 Allocating PCI resources starting at c0000000 (gap: c0000000:20000000) Booting paravirtualized kernel on Xen Xen version: 4.1-unstable (preserve-AD) (dom0) NR_CPUS:16 nr_cpumask_bits:16 nr_cpu_ids:4 nr_node_ids:1 PERCPU: Embedded 28 pages/cpu @ffff88000336d000 s83096 r8192 d23400 u114688 pcpu-alloc: s83096 r8192 d23400 u114688 alloc=28*4096 pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 trying to map vcpu_info 0 at ffff880003378020, mfn 13b378, offset 32 cpu 0 using vcpu_info at ffff880003378020 trying to map vcpu_info 1 at ffff880003394020, mfn 13b394, offset 32 cpu 1 using vcpu_info at ffff880003394020 trying to map vcpu_info 2 at ffff8800033b0020, mfn 13b3b0, offset 32 cpu 2 using vcpu_info at ffff8800033b0020 trying to map vcpu_info 3 at ffff8800033cc020, mfn 13b3cc, offset 32 cpu 3 using vcpu_info at ffff8800033cc020 Xen: using vcpu_info placement Built 1 zonelists in Node order, mobility grouping on. Total pages: 765816 Policy zone: DMA32 Kernel command line: ro root=/dev/mapper/vg_lilith--raid-root LANG=en_US.UTF-8 SYSFONT=latarcyrheb-sun16 KEYBOARDTYPE=pc KEYTABLE=us ignore_loglevel earlyprintk=xen console=hvc0 rdshell pcie_aspm=off PCIe ASPM is disabled PID hash table entries: 4096 (order: 3, 32768 bytes) Initializing CPU#0 DMA: Placing 64MB software IO TLB between ffff88000794a000 - ffff88000b94a000 DMA: software IO TLB at phys 0x794a000 - 0xb94a000 xen_swiotlb_fixup: buf=ffff88000794a000 size=67108864 xen_swiotlb_fixup: buf=ffff88000b9aa000 size=32768 Memory: 2960308k/3137088k available (4691k kernel code, 396k absent, 176384k reserved, 2987k data, 656k init) Hierarchical RCU implementation. NR_IRQS:4352 nr_irqs:1280 xen: --> irq=0 xen: --> irq=1 xen: --> irq=2 xen: --> irq=3 xen: --> irq=4 xen: --> irq=5 xen: --> irq=6 xen: --> irq=7 xen: --> irq=8 xen: --> irq=9 xen: --> irq=10 xen: --> irq=11 xen: --> irq=12 xen: --> irq=13 xen: --> irq=14 xen: --> irq=15 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) xen: sci override: source_irq=9 global_irq=9 trigger=c polarity=1 xen: registering gsi 9 triggering 0 polarity 0 xen_allocate_pirq: returning irq 9 for gsi 9 xen: --> irq=9 xen: acpi sci 9 Console: colour VGA+ 80x25 console [hvc0] enabled, bootconsole disabled console [hvc0] enabled, bootconsole disabled Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar ... MAX_LOCKDEP_SUBCLASSES: 8 ... MAX_LOCK_DEPTH: 48 ... MAX_LOCKDEP_KEYS: 8191 ... CLASSHASH_SIZE: 4096 ... MAX_LOCKDEP_ENTRIES: 16384 ... MAX_LOCKDEP_CHAINS: 32768 ... CHAINHASH_SIZE: 16384 memory used by lock dependency info: 5855 kB per task-struct memory footprint: 1920 bytes Xen: using vcpuop timer interface installing Xen timer for CPU 0 alloc irq_desc for 1279 on node 0 alloc kstat_irqs on node 0 Detected 2400.062 MHz processor. Calibrating delay loop (skipped), value calculated using timer frequency.. 4800.12 BogoMIPS (lpj=2400062) Security Framework initialized SELinux: Initializing. SELinux: Starting in permissive mode Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) Mount-cache hash table entries: 256 Initializing cgroup subsys ns Initializing cgroup subsys cpuacct CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 256K CPU: L3 cache: 8192K CPU 0/0x0 -> Node 0 CPU: Unsupported number of siblings 16 Performance Events: unsupported p6 CPU model 30 no PMU driver, software events only. lockdep: fixing up alternatives. SMP alternatives: switching to UP code ACPI: Core revision 20090903 alloc irq_desc for 1278 on node 0 alloc kstat_irqs on node 0 cpu 0 spinlock event irq 1278 alloc irq_desc for 1277 on node 0 alloc kstat_irqs on node 0 alloc irq_desc for 1276 on node 0 alloc kstat_irqs on node 0 alloc irq_desc for 1275 on node 0 alloc kstat_irqs on node 0 alloc irq_desc for 1274 on node 0 alloc kstat_irqs on node 0 installing Xen timer for CPU 1 alloc irq_desc for 1273 on node 0 alloc kstat_irqs on node 0 alloc irq_desc for 1272 on node 0 alloc kstat_irqs on node 0 cpu 1 spinlock event irq 1272 lockdep: fixing up alternatives. SMP alternatives: switching to SMP code alloc irq_desc for 1271 on node 0 alloc kstat_irqs on node 0 alloc irq_desc for 1270 on node 0 alloc kstat_irqs on node 0 alloc irq_desc for 1269 on node 0 alloc kstat_irqs on node 0 alloc irq_desc for 1268 on node 0 alloc kstat_irqs on node 0 Initializing CPU#1 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 256K CPU: L3 cache: 8192K CPU 1/0x0 -> Node 0 CPU: Unsupported number of siblings 16 installing Xen timer for CPU 2 alloc irq_desc for 1267 on node 0 alloc kstat_irqs on node 0 alloc irq_desc for 1266 on node 0 alloc kstat_irqs on node 0 cpu 2 spinlock event irq 1266 alloc irq_desc for 1265 on node 0 alloc kstat_irqs on node 0 alloc irq_desc for 1264 on node 0 alloc kstat_irqs on node 0 alloc irq_desc for 1263 on node 0 alloc kstat_irqs on node 0 alloc irq_desc for 1262 on node 0 alloc kstat_irqs on node 0 Initializing CPU#2 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 256K CPU: L3 cache: 8192K CPU 2/0x0 -> Node 0 CPU: Unsupported number of siblings 16 installing Xen timer for CPU 3 alloc irq_desc for 1261 on node 0 alloc kstat_irqs on node 0 alloc irq_desc for 1260 on node 0 alloc kstat_irqs on node 0 cpu 3 spinlock event irq 1260 alloc irq_desc for 1259 on node 0 alloc kstat_irqs on node 0 alloc irq_desc for 1258 on node 0 alloc kstat_irqs on node 0 alloc irq_desc for 1257 on node 0 alloc kstat_irqs on node 0 alloc irq_desc for 1256 on node 0 alloc kstat_irqs on node 0 Initializing CPU#3 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 256K CPU: L3 cache: 8192K CPU 3/0x0 -> Node 0 CPU: Unsupported number of siblings 16 Brought up 4 CPUs Grant table initialized Time: 16:45:17 Date: 04/07/10 NET: Registered protocol family 16 alloc irq_desc for 1255 on node 0 alloc kstat_irqs on node 0 ACPI: bus type pci registered PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 PCI: MCFG area at e0000000 reserved in E820 PCI: Using MMCONFIG at e0000000 - efffffff PCI: Using configuration type 1 for base access bio: create slab<bio-0> at 0 ERROR: Unable to locate IOAPIC for GSI 9 ACPI: EC: Look up EC in DSDT ACPI Warning for \_SB_._OSC: Return type mismatch - found Integer, expected Buffer (20090903/nspredef-1006) \_SB_:_OSC evaluation returned wrong type _OSC request data:1 6 ACPI: Executed 1 blocks of module-level executable AML code ACPI: Interpreter enabled ACPI: (supports S0 S1 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI Warning: Incorrect checksum in table [OEMB] - 91, should be 8E (20090903/tbutils-314) ACPI Warning: Incorrect checksum in table [ ] - 7B, should be BF (20090903/tbutils-314) ACPI: No dock devices found. ACPI: PCI Root Bridge [PCI0] (0000:00) pci 0000:00:03.0: PME# supported from D0 D3hot D3cold pci 0000:00:03.0: PME# disabled pci 0000:00:05.0: PME# supported from D0 D3hot D3cold pci 0000:00:05.0: PME# disabled pci 0000:00:1a.0: reg 10 32bit mmio: [0xfb3fc000-0xfb3fc3ff] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold pci 0000:00:1a.0: PME# disabled pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold pci 0000:00:1c.0: PME# disabled pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold pci 0000:00:1c.4: PME# disabled pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold pci 0000:00:1c.5: PME# disabled pci 0000:00:1d.0: reg 10 32bit mmio: [0xfb3fa000-0xfb3fa3ff] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold pci 0000:00:1d.0: PME# disabled pci 0000:00:1f.2: reg 10 io port: [0xb400-0xb407] pci 0000:00:1f.2: reg 14 io port: [0xbc00-0xbc03] pci 0000:00:1f.2: reg 18 io port: [0xb880-0xb887] pci 0000:00:1f.2: reg 1c io port: [0xb800-0xb803] pci 0000:00:1f.2: reg 20 io port: [0xb480-0xb49f] pci 0000:00:1f.2: reg 24 32bit mmio: [0xfb3f8000-0xfb3f87ff] pci 0000:00:1f.2: PME# supported from D3hot pci 0000:00:1f.2: PME# disabled pci 0000:00:1f.3: reg 10 64bit mmio: [0xfb3f6000-0xfb3f60ff] pci 0000:00:1f.3: reg 20 io port: [0x400-0x41f] pci 0000:03:00.0: reg 10 32bit mmio: [0xfb420000-0xfb43ffff] pci 0000:03:00.0: reg 14 32bit mmio: [0xfb480000-0xfb4fffff] pci 0000:03:00.0: reg 18 io port: [0xcc00-0xcc1f] pci 0000:03:00.0: reg 1c 32bit mmio: [0xfb41c000-0xfb41ffff] pci 0000:03:00.0: reg 30 32bit mmio pref: [0xfb440000-0xfb47ffff] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold pci 0000:03:00.0: PME# disabled pci 0000:00:1c.0: bridge io port: [0xc000-0xcfff] pci 0000:00:1c.0: bridge 32bit mmio: [0xfb400000-0xfb4fffff] pci 0000:04:00.0: reg 10 32bit mmio: [0xfb5e0000-0xfb5fffff] pci 0000:04:00.0: reg 18 io port: [0xdc00-0xdc1f] pci 0000:04:00.0: reg 1c 32bit mmio: [0xfb5dc000-0xfb5dffff] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold pci 0000:04:00.0: PME# disabled pci 0000:00:1c.4: bridge io port: [0xd000-0xdfff] pci 0000:00:1c.4: bridge 32bit mmio: [0xfb500000-0xfb5fffff] pci 0000:05:00.0: reg 10 32bit mmio: [0xfb6e0000-0xfb6fffff] pci 0000:05:00.0: reg 18 io port: [0xec00-0xec1f] pci 0000:05:00.0: reg 1c 32bit mmio: [0xfb6dc000-0xfb6dffff] pci 0000:05:00.0: PME# supported from D0 D3hot D3cold pci 0000:05:00.0: PME# disabled pci 0000:00:1c.5: bridge io port: [0xe000-0xefff] pci 0000:00:1c.5: bridge 32bit mmio: [0xfb600000-0xfb6fffff] pci 0000:06:03.0: reg 10 32bit mmio pref: [0xfa000000-0xfaffffff] pci 0000:06:03.0: reg 14 32bit mmio: [0xfb7fc000-0xfb7fffff] pci 0000:06:03.0: reg 18 32bit mmio: [0xfb800000-0xfbffffff] pci 0000:00:1e.0: transparent bridge pci 0000:00:1e.0: bridge 32bit mmio: [0xfb700000-0xfbffffff] pci 0000:00:1e.0: bridge 64bit mmio pref: [0xfa000000-0xfaffffff] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR1E._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0ehci_hcd 0000:00:1a.0: port 1 high speed ehci_hcd 0000:00:1a.0: GetStatus port 1 status 001005 POWER sig=se0 PE CONNECT ahci 0000:00:1f.2: version 3.0 xen: registering gsi 19 triggering 0 polarity 1 alloc irq_desc for 19 on node 0 alloc kstat_irqs on node 0 xen: --> irq=19 ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 alloc irq_desc for 1247 on node 0 alloc kstat_irqs on node 0 ahci: SSS flag set, parallel bus scan disabled ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x3f impl SATA mode ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems sxs apst ahci 0000:00:1f.2: setting latency timer to 64 scsi0 : ahci scsi1 : ahci scsi2 : ahci scsi3 : ahci scsi4 : ahci scsi5 : ahci ata1: SATA max UDMA/133 abar m2048@0xfb3f8000 port 0xfb3f8100 irq 1247 ata2: SATA max UDMA/133 abar m2048@0xfb3f8000 port 0xfb3f8180 irq 1247 ata3: SATA max UDMA/133 abar m2048@0xfb3f8000 port 0xfb3f8200 irq 1247 ata4: SATA max UDMA/133 abar m2048@0xfb3f8000 port 0xfb3f8280 irq 1247 ata5: SATA max UDMA/133 abar m2048@0xfb3f8000 port 0xfb3f8300 irq 1247 ata6: SATA max UDMA/133 abar m2048@0xfb3f8000 port 0xfb3f8380 irq 1247 usb 1-1: udev 2, busnum 1, minor = 1 usb 1-1: New USB device found, idVendor=8087, idProduct=0020 usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 usb 1-1: usb_probe_device usb 1-1: configuration #1 chosen from 1 choice usb 1-1: adding 1-1:1.0 (config #1, interface 0) hub 1-1:1.0: usb_probe_interface hub 1-1:1.0: usb_probe_interface - got id hub 1-1:1.0: USB hub found hub 1-1:1.0: 6 ports detected hub 1-1:1.0: standalone hub hub 1-1:1.0: individual port power switching hub 1-1:1.0: individual port over-current protection hub 1-1:1.0: Single TT hub 1-1:1.0: TT requires at most 8 FS bit times (666 ns) hub 1-1:1.0: Port indicators are supported hub 1-1:1.0: power on to power good time: 100ms hub 1-1:1.0: local power source is good hub 1-1:1.0: enabling power on all ports hub 2-0:1.0: state 7 ports 2 chg 0002 evt 0000 hub 2-0:1.0: port 1, status 0501, change 0000, 480 Mb/s ehci_hcd 0000:00:1d.0: port 1 high speed ehci_hcd 0000:00:1d.0: GetStatus port 1 status 001005 POWER sig=se0 PE CONNECT hub 1-1:1.0: port 2: status 0101 change 0001 usb 2-1: new high speed USB device using ehci_hcd and address 2 ehci_hcd 0000:00:1d.0: port 1 high speed ehci_hcd 0000:00:1d.0: GetStatus port 1 status 001005 POWER sig=se0 PE CONNECT usb 1-1: link qh256-0001/ffff8800bc51f9c0 start 1 [1/0 us] usb 2-1: udev 2, busnum 2, minor = 129 usb 2-1: New USB device found, idVendor=8087, idProduct=0020 usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 usb 2-1: usb_probe_device usb 2-1: configuration #1 chosen from 1 choice usb 2-1: adding 2-1:1.0 (config #1, interface 0) hub 2-1:1.0: usb_probe_interface hub 2-1:1.0: usb_probe_interface - got id hub 2-1:1.0: USB hub found hub 2-1:1.0: 8 ports detected hub 2-1:1.0: standalone hub hub 2-1:1.0: individual port power switching hub 2-1:1.0: individual port over-current protection hub 2-1:1.0: Single TT hub 2-1:1.0: TT requires at most 8 FS bit times (666 ns) hub 2-1:1.0: Port indicators are supported hub 2-1:1.0: power on to power good time: 100ms hub 2-1:1.0: local power source is good hub 2-1:1.0: enabling power on all ports hub 1-1:1.0: state 7 ports 6 chg 0004 evt 0000 hub 1-1:1.0: port 2, status 0101, change 0000, 12 Mb/s hub 1-1:1.0: port 2 not reset yet, waiting 10ms usb 1-1.2: new full speed USB device using ehci_hcd and address 3 ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) hub 1-1:1.0: port 2 not reset yet, waiting 10ms ata1.00: ATA-8: WDC WD10EADS-00P8B0, 01.00A01, max UDMA/133 ata1.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA ata1.00: configured for UDMA/133 scsi 0:0:0:0: Direct-Access ATA WDC WD10EADS-00P 01.0 PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 0:0:0:0: Attached scsi generic sg0 type 0 sda: usb 2-1: link qh256-0001/ffff8800bc51f6c0 start 1 [1/0 us] sda1 sda2 sda3 sda4 sd 0:0:0:0: [sda] Attached SCSI disk usb 1-1.2: skipped 1 descriptor after interface usb 1-1.2: skipped 1 descriptor after interface usb 1-1.2: default language 0x0409 usb 1-1.2: udev 3, busnum 1, minor = 2 usb 1-1.2: New USB device found, idVendor=0557, idProduct=2221 usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 1-1.2: Product: Hermon USB hidmouse Device usb 1-1.2: Manufacturer: Winbond Electronics Corp usb 1-1.2: usb_probe_device usb 1-1.2: configuration #1 chosen from 1 choice usb 1-1.2: adding 1-1.2:1.0 (config #1, interface 0) usbhid 1-1.2:1.0: usb_probe_interface usbhid 1-1.2:1.0: usb_probe_interface - got id input: Winbond Electronics Corp Hermon USB hidmouse Device as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input4 generic-usb 0003:0557:2221.0001: input,hidraw0: USB HID v1.00 Mouse [Winbond Electronics Corp Hermon USB hidmouse Device] on usb-0000:00:1a.0-1.2/input0 usb 1-1.2: adding 1-1.2:1.1 (config #1, interface 1) usbhid 1-1.2:1.1: usb_probe_interface usbhid 1-1.2:1.1: usb_probe_interface - got id input: Winbond Electronics Corp Hermon USB hidmouse Device as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.1/input/input5 usb 1-1.2: link qh8-0601/ffff8800be6225c0 start 2 [1/2 us] generic-usb 0003:0557:2221.0002: input,hidraw1: USB HID v1.00 Keyboard [Winbond Electronics Corp Hermon USB hidmouse Device] on usb-0000:00:1a.0-1.2/input1 hub 2-1:1.0: state 7 ports 8 chg 0000 evt 0000 hub 1-1:1.0: state 7 ports 6 chg 0000 evt 0004 ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata2.00: ATA-7: SAMSUNG HD103SI, 1AG01118, max UDMA7 ata2.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA ata2.00: configured for UDMA/133 scsi 1:0:0:0: Direct-Access ATA SAMSUNG HD103SI 1AG0 PQ: 0 ANSI: 5 sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) sd 1:0:0:0: Attached scsi generic sg1 type 0 sd 1:0:0:0: [sdb] Write Protect is off sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdb: sdb1 sdb2 sdb3 sdb4 sd 1:0:0:0: [sdb] Attached SCSI disk input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input6 ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata3.00: ATA-8: WDC WD10EADS-00P8B0, 01.00A01, max UDMA/133 ata3.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA ata3.00: configured for UDMA/133 scsi 2:0:0:0: Direct-Access ATA WDC WD10EADS-00P 01.0 PQ: 0 ANSI: 5 sd 2:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) sd 2:0:0:0: Attached scsi generic sg2 type 0 sd 2:0:0:0: [sdc] Write Protect is off sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdc: sdc1 sdc2 sdc3 sdc4 sd 2:0:0:0: [sdc] Attached SCSI disk hub 2-1:1.0: hub_suspend usb 2-1: unlink qh256-0001/ffff8800bc51f6c0 start 1 [1/0 us] usb 2-1: usb auto-suspend ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata4.00: ATA-7: SAMSUNG HD103SI, 1AG01118, max UDMA7 ata4.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA ata4.00: configured for UDMA/133 scsi 3:0:0:0: Direct-Access ATA SAMSUNG HD103SI 1AG0 PQ: 0 ANSI: 5 sd 3:0:0:0: [sdd] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) sd 3:0:0:0: Attached scsi generic sg3 type 0 sd 3:0:0:0: [sdd] Write Protect is off sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00 sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdd: sdd1 sdd2 sdd3 sdd4 sd 3:0:0:0: [sdd] Attached SCSI disk ata5: SATA link down (SStatus 0 SControl 300) ata6: SATA link down (SStatus 0 SControl 300) md: raid10 personality registered for level 10 Intel AES-NI instructions are not detected. md: md0 stopped. md: bind<sdb3> md: bind<sdc3> md: bind<sdd3> md: bind<sda3> md: kicking non-fresh sdd3 from array! md: unbind<sdd3> md: export_rdev(sdd3) md: kicking non-fresh sdb3 from array! md: unbind<sdb3> md: export_rdev(sdb3) raid10: raid set md0 active with 2 out of 4 devices md0: detected capacity change from 0 to 838860668928 md0: unknown partition table hub 2-0:1.0: hub_suspend usb usb2: bus auto-suspend ehci_hcd 0000:00:1d.0: suspend root hub Password:*********** EXT4-fs (dm-2): mounted filesystem with ordered data mode type=1404 audit(1270658817.238:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295 SELinux: 8192 avtab hash slots, 162639 rules. SELinux: 8192 avtab hash slots, 162639 rules. SELinux: 8 users, 12 roles, 3092 types, 152 bools, 1 sens, 1024 cats SELinux: 77 classes, 162639 rules SELinux: Completing initialization. SELinux: Setting up existing superblocks. SELinux: initialized (dev dm-2, type ext4), uses xattr SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs SELinux: initialized (dev devpts, type devpts), uses transition SIDs SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts SELinux: initialized (dev pipefs, type pipefs), uses task SIDs SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts SELinux: initialized (dev sockfs, type sockfs), uses task SIDs SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs SELinux: initialized (dev proc, type proc), uses genfs_contexts SELinux: initialized (dev bdev, type bdev), uses genfs_contexts SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts type=1403 audit(1270658817.689:3): policy loaded auid=4294967295 ses=4294967295 Welcome to Fedora Press 'I' to enter interactive startup. Starting udev: udev: starting version 145 ACPI: SSDT 00000000bf7b0180 00F20 (v01 DpgPmm P001Ist 00000011 INTL 20051117) ACPI: SSDT 00000000bf7b10a0 004D5 (v01 PmRef P001Cst 00003001 INTL 20051117) (XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120] (XEN) Monitor-Mwait will be used to enter C-1 state (XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120] (XEN) Monitor-Mwait will be used to enter C-2 state (XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120] (XEN) Monitor-Mwait will be used to enter C-3 state ACPI: CPU-1 (power states: C1[C1] C2[C2] C3[C3]) e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k2 e1000e: Copyright (c) 1999-2008 Intel Corporation. xen: registering gsi 16 triggering 0 polarity 1 xen_allocate_pirq: returning irq 16 for gsi 16 xen: --> irq=16 Already setup the GSI :16 e1000e 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 e1000e 0000:03:00.0: setting latency timer to 64 alloc irq_desc for 1246 on node 0 alloc kstat_irqs on node 0 alloc irq_desc for 1245 on node 0 alloc kstat_irqs on node 0 alloc irq_desc for 1244 on node 0 alloc kstat_irqs on node 0 (XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120] (XEN) Monitor-Mwait will be used to enter C-1 state (XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120] (XEN) Monitor-Mwait will be used to enter C-2 state (XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120] (XEN) Monitor-Mwait will be used to enter C-3 state ACPI: CPU-1 (power states: C1[C1] C2[C2] C3[C3]) 0000:03:00.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:1b:21:4f:65:6b 0000:03:00.0: eth0: Intel(R) PRO/1000 Network Connection 0000:03:00.0: eth0: MAC: 3, PHY: 8, PBA No: e46981-003 xen: registering gsi 16 triggering 0 polarity 1 xen_allocate_pirq: returning irq 16 for gsi 16 xen: --> irq=16 Already setup the GSI :16 e1000e 0000:04:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 e1000e 0000:04:00.0: setting latency timer to 64 alloc irq_desc for 1243 on node 0 alloc kstat_irqs on node 0 alloc irq_desc for 1242 on node 0 alloc kstat_irqs on node 0 alloc irq_desc for 1241 on node 0 alloc kstat_irqs on node 0 (XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120] (XEN) Monitor-Mwait will be used to enter C-1 state (XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120] (XEN) Monitor-Mwait will be used to enter C-2 state (XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120] (XEN) Monitor-Mwait will be used to enter C-3 state ACPI: CPU-1 (power states: C1[C1] C2[C2] C3[C3]) (XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120] (XEN) Monitor-Mwait will be used to enter C-1 state (XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120] (XEN) Monitor-Mwait will be used to enter C-2 state (XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120] (XEN) Monitor-Mwait will be used to enter C-3 state ACPI: CPU-1 (power states: C1[C1] C2[C2] C3[C3]) 0000:04:00.0: eth1: (PCI Express:2.5GB/s:Width x1) 00:30:48:dd:eb:66 0000:04:00.0: eth1: Intel(R) PRO/1000 Network Connection 0000:04:00.0: eth1: MAC: 3, PHY: 8, PBA No: 0101ff-0ff xen: registering gsi 17 triggering 0 polarity 1 xen_allocate_pirq: returning irq 17 for gsi 17 xen: --> irq=17 Already setup the GSI :17 e1000e 0000:05:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 e1000e 0000:05:00.0: setting latency timer to 64 alloc irq_desc for 1240 on node 0 alloc kstat_irqs on node 0 alloc irq_desc for 1239 on node 0 alloc kstat_irqs on node 0 alloc irq_desc for 1238 on node 0 alloc kstat_irqs on node 0 0000:05:00.0: eth2: (PCI Express:2.5GB/s:Width x1) 00:30:48:dd:eb:67 0000:05:00.0: eth2: Intel(R) PRO/1000 Network Connection 0000:05:00.0: eth2: MAC: 3, PHY: 8, PBA No: 0101ff-0ff udev: renamed network interface eth2 to eth1 udev: renamed network interface eth0 to eth2 udev: renamed network interface eth1_rename to eth0 mdadm: /dev/md0 is already in use. Key slot 0 unlocked. Key slot 0 unlocked. device-mapper: multipath: version 1.1.0 loaded Setting up Logical Volume Management: 14 logical volume(s) in volume group "vg_lilith-raid" now active [ OK ] Checking filesystems Checking all file systems. [/sbin/fsck.ext4 (1) -- /] fsck.ext4 -a /dev/mapper/vg_lilith--raid-root /dev/mapper/vg_lilith--raid-root contains a file system with errors, check forced. /dev/mapper/vg_lilith--raid-root: 343615/2564096 files (0.2% non-contiguous), 2390774/10240000 blocks [/sbin/fsck.ext4 (1) -- /boot] fsck.ext4 -a /dev/sda2 [/sbin/fsck.ext4 (2) -- /boot-spare] fsck.ext4 -a /dev/sdb2 /dev/sdb2: clean, 11/66384 files, 12695/265072 blocks /dev/sda2: clean, 89/66384 files, 69878/265072 blocks [/sbin/fsck.ext4 (1) -- /home] fsck.ext4 -a /dev/mapper/luks-11eb0145-088a-4c13-acf4-9784e82bb1e3 /dev/mapper/luks-11eb0145-088a-4c13-acf4-9784e82bb1e3: clean, 506715/12804096 files, 10193956/51199495 blocks [/sbin/fsck.ext4 (1) -- /var] fsck.ext4 -a /dev/mapper/luks-37e6b844-a112-427c-be60-ae6f4d9c5041 /dev/mapper/luks-37e6b844-a112-427c-be60-ae6f4d9c5041: clean, 21026/5120000 files, 490586/20479495 blocks [ OK ] Remounting root filesystem in read-write mode: [ OK ] Mounting local filesystems: EXT4-fs (sda2): mounted filesystem with ordered data mode SELinux: initialized (dev sda2, type ext4), uses xattr EXT4-fs (sdb2): mounted filesystem with ordered data mode SELinux: initialized (dev sdb2, type ext4), uses xattr EXT4-fs (dm-15): mounted filesystem with ordered data mode SELinux: initialized (dev dm-15, type ext4), uses xattr EXT4-fs (dm-16): mounted filesystem with ordered data mode SELinux: initialized (dev dm-16, type ext4), uses xattr SELinux: initialized (dev xenfs, type xenfs), uses genfs_contexts [ OK ] Enabling local filesystem quotas: [ OK ] Enabling /etc/fstab swaps: Adding 16381972k swap on /dev/mapper/luks-2aac27aa-0bb6-46cc-8a7a-83af1ca296a2. Priority:-1 extents:1 across:16381972k [ OK ] SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts Entering non-interactive startup Applying Intel CPU microcode update: platform microcode: firmware: requesting intel-ucode/06-1e-05 platform microcode: firmware: requesting intel-ucode/06-1e-05 platform microcode: firmware: requesting intel-ucode/06-1e-05 platform microcode: firmware: requesting intel-ucode/06-1e-05 Microcode Update Driver: v2.00<tigran@aivazian.fsnet.co.uk>, Peter Oruba Microcode Update Driver: v2.00 removed. Starting monitoring for VG vg_lilith-raid: 14 logical volume(s) in volume group "vg_lilith-raid" monitored [ OK ] ip6tables: Applying firewall rules: [ OK ] ip6tables: Loading additional modules: nf_conntrack_netbios_ns [ OK ] Starting auditd: [ OK ] Starting portreserve: [ OK ] Starting system logger: [ OK ] Starting irqbalance: [ OK ] Starting rpcbind: [ OK ] Starting mdmonitor: [ OK ] Starting system message bus: [ OK ] Starting Avahi daemon... [ OK ] Starting NFS statd: [ OK ] Starting RPC idmapd: FATAL: Module sunrpc not found. FATAL: Error running install command for sunrpc Error: RPC MTAB does not exist. Starting cups: [ OK ] Starting acpi daemon: [ OK ] Starting HAL daemon: [ OK ] Starting PC/SC smart card daemon (pcscd): [ OK ] Retrigger failed udev events[ OK ] Setting network parameters... [ OK ] Starting NetworkManager daemon: [ OK ] Enabling Bluetooth devices: Starting sshd: [ OK ] ADDRCONF(NETDEV_UP): eth2: link is not ready ntpdate: Synchronizing with time server: ADDRCONF(NETDEV_UP): eth0: link is not ready ADDRCONF(NETDEV_UP): eth1: link is not ready [FAILED] Starting ntpd: [ OK ] Starting abrt daemon: [ OK ] usb 1-1.2: link qh8-0601/ffff8800b58ba740 start 3 [1/2 us] [ OK ] crond: [ OK ] Enabling monthly Smolt checkin: [ OK ] [ OK ] atd: [ OK ] Starting libvirtd daemon: [ OK ] Bridge firewalling registered virbr0: starting userspace STP failed, starting kernel STP e1000e: eth1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready e1000e: eth2 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX ADDRCONF(NETDEV_CHANGE): eth2: link becomes ready e1000e: eth0 NICMbps Full Duplex, Flow Control: RX/TX ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs SELinux: initialized (dev proc, type proc), uses genfs_contexts SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs Fedora release 12 (Constantine) Kernel 2.6.32.11 on an x86_64 (/dev/hvc0) lilith.goop.org login: usb usb2: usb auto-resume ehci_hcd 0000:00:1d.0: resume root hub hub 2-0:1.0: hub_resume hub 2-0:1.0: port 1: status 0507 change 0000 usb 2-1: usb auto-resume hub 2-0:1.0: state 7 ports 2 chg 0000 evt 0000 ehci_hcd 0000:00:1d.0: GetStatus port 1 status 001005 POWER sig=se0 PE CONNECT usb 2-1: finish resume hub 2-1:1.0: hub_resume ehci_hcd 0000:00:1d.0: reused qh ffff8800bc51f6c0 schedule usb 2-1: link qh256-0001/ffff8800bc51f6c0 start 1 [1/0 us] hub 2-1:1.0: state 7 ports ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: New DMAR errors in Xen 4.1 2010-04-07 16:55 ` Jeremy Fitzhardinge @ 2010-04-08 2:32 ` Weidong Han 2010-04-08 16:58 ` Jeremy Fitzhardinge 0 siblings, 1 reply; 7+ messages in thread From: Weidong Han @ 2010-04-08 2:32 UTC (permalink / raw) To: Jeremy Fitzhardinge; +Cc: Xen-devel, Keir Fraser Jeremy Fitzhardinge wrote: > On 04/06/2010 07:50 PM, Weidong Han wrote: > >>> It turns out its... "Enable debug=y by default in the build." So I >>> guess these errors have been happening silently thus far? >>> >>> J >>> >> I don't encounter this issue. These DMAR fault messages will be >> printed even when debug=n. what platform are you using? could you post >> complete booting log with "iommu=verbose"? >> > > This is a Supermicro X8SIL-F system, which is a Lynnfield + Ibex Peak > system. > > I've attached two boot logs below. The first is one where there lots of > DMAR errors early, and the system is a disaster (basically doesn't come > up, lots of devices fail to init). Unfortunately it looks like I > mistyped "verbose". > > The second boot was immediately after the first and it comes up cleanly > with no DMAR errors at all. So it appears there's some non-determinism > there. The gmfns in the messages always appear to be about he same, so > I wonder if it depends on exactly what pages the kernel ends up > allocating for IO? (It probably also means my bisection results are > suspect.) > the boot log with "iommu=verbose" looks fine. when you mistyped "verbose", it equals to default iommu setting, that's iommu=1. Can I understand that: the DMAR faults only occur when "debug=y" with default iommu setting (iommu=1)? Besides print more info, "iommu=verbose" also invokes process_pending_softirqs in domain_context_mapping. Could you try below patch to also call process_pending_softirqs for "iommu=1"? diff -r 28e5409e3fb3 xen/drivers/passthrough/vtd/iommu.c --- a/xen/drivers/passthrough/vtd/iommu.c Wed Apr 07 16:22:05 2010 +0100 +++ b/xen/drivers/passthrough/vtd/iommu.c Thu Apr 08 10:18:15 2010 +0800 @@ -1366,7 +1366,7 @@ static int domain_context_mapping(struct break; } - if ( iommu_verbose ) +// if ( iommu_verbose ) process_pending_softirqs(); return ret; > (BTW, what's a "type 9" E820 region?) > > Thanks, > J > > > __ __ _ _ _ _ _ _ > \ \/ /___ _ __ | || | / | _ _ _ __ ___| |_ __ _| |__ | | ___ > \ // _ \ '_ \ | || |_ | |__| | | | '_ \/ __| __/ _` | '_ \| |/ _ \ > / \ __/ | | | |__ _|| |__| |_| | | | \__ \ || (_| | |_) | | __/ > /_/\_\___|_| |_| |_|(_)_| \__,_|_| |_|___/\__\__,_|_.__/|_|\___| > > (XEN) Xen version 4.1-unstable (jeremy@) (gcc version 4.4.3 20100127 (Red Hat 4.4.3-4) (GCC) ) Tue Apr 6 17:23:29 PDT 2010 > (XEN) Latest ChangeSet: Tue Apr 06 17:23:12 2010 -0700 21115:ea6c67dc4577 > (XEN) Command line: com2=115200,8n1,0x3e8,5 console=com2,vga cpufreq=xen iommu=verbos8 > (XEN) Video information: > (XEN) VGA is text mode 80x25, font 8x16 > (XEN) VBE/DDC methods: none; EDID transfer time: 0 seconds > (XEN) EDID info not retrieved because no DDC retrieval method detected > (XEN) Disc information: > (XEN) Found 4 MBR signatures > (XEN) Found 4 EDD information structures > (XEN) Xen-e820 RAM map: > (XEN) 0000000000000000 - 000000000009d800 (usable) > (XEN) 000000000009d800 - 00000000000a0000 (reserved) > (XEN) 00000000000e0000 - 0000000000100000 (reserved) > (XEN) 0000000000100000 - 00000000bf790000 (usable) > (XEN) 00000000bf79e000 - 00000000bf7a0000 type 9 > (XEN) 00000000bf7a0000 - 00000000bf7ae000 (ACPI data) > (XEN) 00000000bf7ae000 - 00000000bf7d0000 (ACPI NVS) > (XEN) 00000000bf7d0000 - 00000000bf7e0000 (reserved) > (XEN) 00000000bf7ed000 - 00000000c0000000 (reserved) > (XEN) 00000000e0000000 - 00000000f0000000 (reserved) > (XEN) 00000000fed20000 - 00000000fed40000 (reserved) > (XEN) 00000000fee00000 - 00000000fee01000 (reserved) > (XEN) 0000000100000000 - 0000000140000000 (usable) > (XEN) ACPI: RSDP 000FA110, 0024 (r2 ACPIAM) > (XEN) ACPI: XSDT BF7A0100, 0084 (r1 SMCI 20100225 MSFT 97) > (XEN) ACPI: FACP BF7A0290, 00F4 (r4 022510 FACP1918 20100225 MSFT 97) > (XEN) ACPI: DSDT BF7A05F0, 6C55 (r2 10605 10605000 0 INTL 20051117) > (XEN) ACPI: FACS BF7AE000, 0040 > (XEN) ACPI: APIC BF7A0390, 0092 (r2 022510 APIC1918 20100225 MSFT 97) > (XEN) ACPI: MCFG BF7A0430, 003C (r1 022510 OEMMCFG 20100225 MSFT 97) > (XEN) ACPI: OEMB BF7AE040, 0073 (r1 022510 OEMB1918 20100225 MSFT 97) > (XEN) ACPI: HPET BF7AA5F0, 0038 (r1 022510 OEMHPET 20100225 MSFT 97) > (XEN) ACPI: GSCI BF7AE0C0, 2024 (r1 022510 GMCHSCI 20100225 MSFT 97) > (XEN) ACPI: DMAR BF7B00F0, 0090 (r1 AMI OEMDMAR 1 MSFT 97) > (XEN) ACPI: SSDT BF7B1580, 0363 (r1 DpgPmm CpuPm 12 INTL 20051117) > (XEN) ACPI: EINJ BF7AA630, 0130 (r1 AMIER AMI_EINJ 20100225 MSFT 97) > (XEN) ACPI: BERT BF7AA7C0, 0030 (r1 AMIER AMI_BERT 20100225 MSFT 97) > (XEN) ACPI: ERST BF7AA7F0, 01B0 (r1 AMIER AMI_ERST 20100225 MSFT 97) > (XEN) ACPI: HEST BF7AA9A0, 00A8 (r1 AMIER ABC_HEST 20100225 MSFT 97) > (XEN) System RAM: 4056MB (4153584kB) > (XEN) No NUMA configuration found > (XEN) Faking a node at 0000000000000000-0000000140000000 > (XEN) Domain heap initialised > (XEN) found SMP MP-table at 000ff780 > (XEN) DMI present. > (XEN) Using APIC driver default > (XEN) ACPI: PM-Timer IO Port: 0x808 > (XEN) ACPI: ACPI SLEEP INFO: pm1x_cnt[804,0], pm1x_evt[800,0] > (XEN) ACPI: wakeup_vec[bf7ae00c], vec_size[20] > (XEN) ACPI: Local APIC address 0xfee00000 > (XEN) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) > (XEN) Processor #0 7:14 APIC version 21 > (XEN) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) > (XEN) Processor #2 7:14 APIC version 21 > (XEN) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled) > (XEN) Processor #4 7:14 APIC version 21 > (XEN) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled) > (XEN) Processor #6 7:14 APIC version 21 > (XEN) ACPI: LAPIC (acpi_id[0x05] lapic_id[0x84] disabled) > (XEN) ACPI: LAPIC (acpi_id[0x06] lapic_id[0x85] disabled) > (XEN) ACPI: LAPIC (acpi_id[0x07] lapic_id[0x86] disabled) > (XEN) ACPI: LAPIC (acpi_id[0x08] lapic_id[0x87] disabled) > (XEN) ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) > (XEN) ACPI: IOAPIC (id[0x07] address[0xfec00000] gsi_base[0]) > (XEN) IOAPIC[0]: apic_id 7, version 32, address 0xfec00000, GSI 0-23 > (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) > (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) > (XEN) ACPI: IRQ0 used by override. > (XEN) ACPI: IRQ2 used by override. > (XEN) ACPI: IRQ9 used by override. > (XEN) Enabling APIC mode: Flat. Using 1 I/O APICs > (XEN) ACPI: HPET id: 0x8086a701 base: 0xfed00000 > (XEN) PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 > (XEN) PCI: MCFG area at e0000000 reserved in E820 > (XEN) Using ACPI (MADT) for SMP configuration information > (XEN) Using scheduler: SMP Credit Scheduler (credit) > (XEN) Detected 2400.067 MHz processor. > (XEN) Initing memory sharing. > (XEN) EPT support 2M super page. > (XEN) VMX: Supported advanced features: > (XEN) - APIC MMIO access virtualisation > (XEN) - APIC TPR shadow > (XEN) - Extended Page Tables (EPT) > (XEN) - Virtual-Processor Identifiers (VPID) > (XEN) - Virtual NMI > (XEN) - MSR direct-access bitmap > (XEN) HVM: ASIDs enabled. > (XEN) HVM: VMX enabled > (XEN) HVM: Hardware Assisted Paging detected. > (XEN) Intel machine check reporting enabled > (XEN) Intel VT-d Snoop Control supported. > (XEN) Intel VT-d DMA Passthrough not supported. > (XEN) Intel VT-d Queued Invalidation supported. > (XEN) Intel VT-d Interrupt Remapping not supported. > (XEN) I/O virtualisation enabled > (XEN) I/O virtualisation for PV guests disabled > (XEN) EPT support 2M super page. > (XEN) EPT support 2M super page. > (XEN) EPT support 2M super page. > (XEN) Total of 4 processors activated. > (XEN) ENABLING IO-APIC IRQs > (XEN) -> Using new ACK method > (XEN) ..TIMER: vector=0xF0 apic1=0 pin1=2 apic2=-1 pin2=-1 > (XEN) TSC is reliable, synchronization unnecessary > (XEN) Platform timer is 14.318MHz HPET > �(XEN) Allocated console ring of 32 KiB. > (XEN) microcode.c:73:d32767 microcode: CPU1 resumed > (XEN) microcode.c:73:d32767 microcode: CPU2 resumed > (XEN) Brought up 4 CPUs > (XEN) microcode.c:73:d32767 microcode: CPU3 resumed > (XEN) Turbo Mode detected! > (XEN) HPET: 8 timers in total, 8 timers will be used for broadcast > (XEN) ACPI sleep modes: S3 > (XEN) mcheck_poll: Machine check polling timer started. > (XEN) *** LOADING DOMAIN 0 *** > (XEN) elf_parse_binary: phdr: paddr=0x1000000 memsz=0x69c000 > (XEN) elf_parse_binary: phdr: paddr=0x169c000 memsz=0xe3cb0 > (XEN) elf_parse_binary: phdr: paddr=0x1780000 memsz=0x888 > (XEN) elf_parse_binary: phdr: paddr=0x1781000 memsz=0x14498 > (XEN) elf_parse_binary: phdr: paddr=0x1796000 memsz=0x9f5000 > (XEN) elf_parse_binary: memory: 0x1000000 -> 0x218b000 > (XEN) elf_xen_parse_note: GUEST_OS = "linux" > (XEN) elf_xen_parse_note: GUEST_VERSION = "2.6" > (XEN) elf_xen_parse_note: XEN_VERSION = "xen-3.0" > (XEN) elf_xen_parse_note: VIRT_BASE = 0xffffffff80000000 > (XEN) elf_xen_parse_note: ENTRY = 0xffffffff81796200 > (XEN) elf_xen_parse_note: HYPERCALL_PAGE = 0xffffffff81009000 > (XEN) elf_xen_parse_note: FEATURES = "!writable_page_tables|pae_pgdir_above_4gb" > (XEN) elf_xen_parse_note: PAE_MODE = "yes" > (XEN) elf_xen_parse_note: LOADER = "generic" > (XEN) elf_xen_parse_note: unknown xen elf note (0xd) > (XEN) elf_xen_parse_note: SUSPEND_CANCEL = 0x1 > (XEN) elf_xen_parse_note: HV_START_LOW = 0xffff800000000000 > (XEN) elf_xen_parse_note: PADDR_OFFSET = 0x0 > (XEN) elf_xen_addr_calc_check: addresses: > (XEN) virt_base = 0xffffffff80000000 > (XEN) elf_paddr_offset = 0x0 > (XEN) virt_offset = 0xffffffff80000000 > (XEN) virt_kstart = 0xffffffff81000000 > (XEN) virt_kend = 0xffffffff8218b000 > (XEN) virt_entry = 0xffffffff81796200 > (XEN) p2m_base = 0xffffffffffffffff > (XEN) Xen kernel: 64-bit, lsb, compat32 > (XEN) Dom0 kernel: 64-bit, PAE, lsb, paddr 0x1000000 -> 0x218b000 > (XEN) PHYSICAL MEMORY ARRANGEMENT: > (XEN) Dom0 alloc.: 0000000138000000->000000013c000000 (981633 pages to be allocated) > (XEN) VIRTUAL MEMORY ARRANGEMENT: > (XEN) Loaded kernel: ffffffff81000000->ffffffff8218b000 > (XEN) Init. ramdisk: ffffffff8218b000->ffffffff82b69800 > (XEN) Phys-Mach map: ffffffff82b6a000->ffffffff83307408 > (XEN) Start info: ffffffff83308000->ffffffff833084b4 > (XEN) Page tables: ffffffff83309000->ffffffff83326000 > (XEN) Boot stack: ffffffff83326000->ffffffff83327000 > (XEN) TOTAL: ffffffff80000000->ffffffff83400000 > (XEN) ENTRY ADDRESS: ffffffff81796200 > (XEN) Dom0 has maximum 4 VCPUs > (XEN) elf_load_binary: phdr 0 at 0xffffffff81000000 -> 0xffffffff8169c000 > (XEN) elf_load_binary: phdr 1 at 0xffffffff8169c000 -> 0xffffffff8177fcb0 > (XEN) elf_load_binary: phdr 2 at 0xffffffff81780000 -> 0xffffffff81780888 > (XEN) elf_load_binary: phdr 3 at 0xffffffff81781000 -> 0xffffffff81795498 > (XEN) elf_load_binary: phdr 4 at 0xffffffff81796000 -> 0xffffffff81830000 > (XEN) Scrubbing Free RAM: .done. > (XEN) Xen trace buffers: disabled > (XEN) Std. Loglevel: All > (XEN) Guest Loglevel: All > (XEN) Xen is relinquishing VGA console. > (XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch input to Xen) > (XEN) Freed 164kB init memory. > mapping kernel into physical memory > Xen: setup ISA identity maps > about to get started... > Initializing cgroup subsys cpuset > Initializing cgroup subsys cpu > Linux version 2.6.32.11 (jeremy@lilith.goop.org) (gcc version 4.4.3 20100127 (Red Hat 4.4.3-4) (GCC) ) #7 SMP PREEMPT Mon Apr 5 14:58:54 PDT 2010 > Command line: ro root=/dev/mapper/vg_lilith--raid-root LANG=en_US.UTF-8 SYSFONT=latarcyrheb-sun16 KEYBOARDTYPE=pc KEYTABLE=us ignore_loglevel earlyprintk=xen console=hvc0 rdshell pcie_aspm=off > KERNEL supported cpus: > Intel GenuineIntel > AMD AuthenticAMD > Centaur CentaurHauls > xen_release_chunk: looking at area pfn bf790-bf79e: 14 pages freed > xen_release_chunk: looking at area pfn bf7e0-bf7ed: 13 pages freed > xen_release_chunk: looking at area pfn c0000-e0000: 131072 pages freed > xen_release_chunk: looking at area pfn f0000-fec00: 14977 pages freed > xen_release_chunk: looking at area pfn fec01-fed20: 0 pages freed > xen_release_chunk: looking at area pfn fed40-fee00: 0 pages freed > released 146076 pages of unused memory > BIOS-provided physical RAM map: > Xen: 0000000000000000 - 000000000009d800 (usable) > Xen: 000000000009d800 - 0000000000100000 (reserved) > Xen: 0000000000100000 - 00000000bf790000 (usable) > Xen: 00000000bf79e000 - 00000000bf7a0000 type 9 > Xen: 00000000bf7a0000 - 00000000bf7ae000 (ACPI data) > Xen: 00000000bf7ae000 - 00000000bf7d0000 (ACPI NVS) > Xen: 00000000bf7d0000 - 00000000bf7e0000 (reserved) > Xen: 00000000bf7ed000 - 00000000c0000000 (reserved) > Xen: 00000000e0000000 - 00000000f0000000 (reserved) > Xen: 00000000fec00000 - 00000000fec01000 (reserved) > Xen: 00000000fed20000 - 00000000fed40000 (reserved) > Xen: 00000000fee00000 - 00000000fee01000 (reserved) > debug: ignoring loglevel setting. > bootconsole [xenboot0] enabled > DMI present. > last_pfn = 0xbf790 max_arch_pfn = 0x400000000 > x86 PAT enabled: cpu 0, old 0x50100070406, new 0x7010600070106 > initial memory mapped : 0 - 20000000 > init_memory_mapping: 0000000000000000-00000000bf790000 > 0000000000 - 00bf790000 page 4k > kernel direct mapping tables up to bf790000 @ 100000-700000 > RAMDISK: 0218b000 - 02b69800 > ACPI: RSDP 00000000000fa110 00024 (v02 ACPIAM) > ACPI: XSDT 00000000bf7a0100 00084 (v01 SMCI 20100225 MSFT 00000097) > ACPI: FACP 00000000bf7a0290 000F4 (v04 022510 FACP1918 20100225 MSFT 00000097) > ACPI: DSDT 00000000bf7a05f0 06C55 (v02 10605 10605000 00000000 INTL 20051117) > ACPI: FACS 00000000bf7ae000 00040 > ACPI: APIC 00000000bf7a0390 00092 (v02 022510 APIC1918 20100225 MSFT 00000097) > ACPI: MCFG 00000000bf7a0430 0003C (v01 022510 OEMMCFG 20100225 MSFT 00000097) > ACPI: OEMB 00000000bf7ae040 00073 (v01 022510 OEMB1918 20100225 MSFT 00000097) > ACPI: HPET 00000000bf7aa5f0 00038 (v01 022510 OEMHPET 20100225 MSFT 00000097) > ACPI: GSCI 00000000bf7ae0c0 02024 (v01 022510 GMCHSCI 20100225 MSFT 00000097) > ACPI: 00000000bf7b00f0 00090 (v01 AMI OEMDMAR 00000001 MSFT 00000097) > ACPI: SSDT 00000000bf7b1580 00363 (v01 DpgPmm CpuPm 00000012 INTL 20051117) > ACPI: EINJ 00000000bf7aa630 00130 (v01 AMIER AMI_EINJ 20100225 MSFT 00000097) > ACPI: BERT 00000000bf7aa7c0 00030 (v01 AMIER AMI_BERT 20100225 MSFT 00000097) > ACPI: ERST 00000000bf7aa7f0 001B0 (v01 AMIER AMI_ERST 20100225 MSFT 00000097) > ACPI: HEST 00000000bf7aa9a0 000A8 (v01 AMIER ABC_HEST 20100225 MSFT 00000097) > ACPI: Local APIC address 0xfee00000 > No NUMA configuration found > Faking a node at 0000000000000000-00000000bf790000 > Bootmem setup node 0 0000000000000000-00000000bf790000 > NODE_DATA [0000000000001000 - 0000000000005fff] > bootmap [0000000000008000 - 000000000001fef7] pages 18 > (8 early reservations) ==> bootmem [0000000000 - 00bf790000] > #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] > #1 [0003309000 - 0003326000] XEN PAGETABLES ==> [0003309000 - 0003326000] > #2 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] > #3 [0001000000 - 000216a048] TEXT DATA BSS ==> [0001000000 - 000216a048] > #4 [000218b000 - 0002b69800] RAMDISK ==> [000218b000 - 0002b69800] > #5 [0002b6a000 - 0003309000] XEN START INFO ==> [0002b6a000 - 0003309000] > #6 [000216b000 - 000216b21b] BRK ==> [000216b000 - 000216b21b] > #7 [0000100000 - 00006e0000] PGTABLE ==> [0000100000 - 00006e0000] > found SMP MP-table at [ffff8800000ff780] ff780 > Zone PFN ranges: > DMA 0x00000000 -> 0x00001000 > DMA32 0x00001000 -> 0x00100000 > Normal 0x00100000 -> 0x00100000 > Movable zone start PFN for each node > early_node_map[2] active PFN ranges > 0: 0x00000000 -> 0x0000009d > 0: 0x00000100 -> 0x000bf790 > On node 0 totalpages: 784173 > DMA zone: 88 pages used for memmap > DMA zone: 1507 pages reserved > DMA zone: 2402 pages, LIFO batch:0 > DMA32 zone: 16762 pages used for memmap > DMA32 zone: 763414 pages, LIFO batch:31 > ACPI: PM-Timer IO Port: 0x808 > ACPI: Local APIC address 0xfee00000 > ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) > ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) > ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled) > ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled) > ACPI: LAPIC (acpi_id[0x05] lapic_id[0x84] disabled) > ACPI: LAPIC (acpi_id[0x06] lapic_id[0x85] disabled) > ACPI: LAPIC (acpi_id[0x07] lapic_id[0x86] disabled) > ACPI: LAPIC (acpi_id[0x08] lapic_id[0x87] disabled) > ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) > ACPI: IOAPIC (id[0x07] address[0xfec00000] gsi_base[0]) > IOAPIC[0]: apic_id 7, version 0, address 0xfec00000, GSI 0-0 > ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) > ERROR: Unable to locate IOAPIC for GSI 2 > ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) > ERROR: Unable to locate IOAPIC for GSI 9 > Using ACPI (MADT) for SMP configuration information > ACPI: HPET id: 0x8086a701 base: 0xfed00000 > SMP: Allowing 4 CPUs, 0 hotplug CPUs > nr_irqs_gsi: 256 > PM: Registered nosave memory: 000000000009d000 - 000000000009e000 > PM: Registered nosave memory: 000000000009e000 - 0000000000100000 > Allocating PCI resources starting at c0000000 (gap: c0000000:20000000) > Booting paravirtualized kernel on Xen > Xen version: 4.1-unstable (preserve-AD) (dom0) > NR_CPUS:16 nr_cpumask_bits:16 nr_cpu_ids:4 nr_node_ids:1 > PERCPU: Embedded 28 pages/cpu @ffff88000336d000 s83096 r8192 d23400 u114688 > pcpu-alloc: s83096 r8192 d23400 u114688 alloc=28*4096 > pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 > trying to map vcpu_info 0 at ffff880003378020, mfn 13b378, offset 32 > cpu 0 using vcpu_info at ffff880003378020 > trying to map vcpu_info 1 at ffff880003394020, mfn 13b394, offset 32 > cpu 1 using vcpu_info at ffff880003394020 > trying to map vcpu_info 2 at ffff8800033b0020, mfn 13b3b0, offset 32 > cpu 2 using vcpu_info at ffff8800033b0020 > trying to map vcpu_info 3 at ffff8800033cc020, mfn 13b3cc, offset 32 > cpu 3 using vcpu_info at ffff8800033cc020 > Xen: using vcpu_info placement > Built 1 zonelists in Node order, mobility grouping on. Total pages: 765816 > Policy zone: DMA32 > Kernel command line: ro root=/dev/mapper/vg_lilith--raid-root LANG=en_US.UTF-8 SYSFONT=latarcyrheb-sun16 KEYBOARDTYPE=pc KEYTABLE=us ignore_loglevel earlyprintk=xen console=hvc0 rdshell pcie_aspm=off > PCIe ASPM is disabled > PID hash table entries: 4096 (order: 3, 32768 bytes) > Initializing CPU#0 > DMA: Placing 64MB software IO TLB between ffff88000794a000 - ffff88000b94a000 > DMA: software IO TLB at phys 0x794a000 - 0xb94a000 > xen_swiotlb_fixup: buf=ffff88000794a000 size=67108864 > xen_swiotlb_fixup: buf=ffff88000b9aa000 size=32768 > Memory: 2960308k/3137088k available (4691k kernel code, 396k absent, 176384k reserved, 2987k data, 656k init) > Hierarchical RCU implementation. > NR_IRQS:4352 nr_irqs:1280 > xen: --> irq=0 > xen: --> irq=1 > xen: --> irq=2 > xen: --> irq=3 > xen: --> irq=4 > xen: --> irq=5 > xen: --> irq=6 > xen: --> irq=7 > xen: --> irq=8 > xen: --> irq=9 > xen: --> irq=10 > xen: --> irq=11 > xen: --> irq=12 > xen: --> irq=13 > xen: --> irq=14 > xen: --> irq=15 > ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) > ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) > xen: sci override: source_irq=9 global_irq=9 trigger=c polarity=1 > xen: registering gsi 9 triggering 0 polarity 0 > xen_allocate_pirq: returning irq 9 for gsi 9 > xen: --> irq=9 > xen: acpi sci 9 > Console: colour VGA+ 80x25 > console [hvc0] enabled, bootconsole disabled > console [hvc0] enabled, bootconsole disabled > Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar > ... MAX_LOCKDEP_SUBCLASSES: 8 > ... MAX_LOCK_DEPTH: 48 > ... MAX_LOCKDEP_KEYS: 8191 > ... CLASSHASH_SIZE: 4096 > ... MAX_LOCKDEP_ENTRIES: 16384 > ... MAX_LOCKDEP_CHAINS: 32768 > ... CHAINHASH_SIZE: 16384 > memory used by lock dependency info: 5855 kB > per task-struct memory footprint: 1920 bytes > Xen: using vcpuop timer interface > installing Xen timer for CPU 0 > alloc irq_desc for 1279 on node 0 > alloc kstat_irqs on node 0 > Detected 2400.066 MHz processor. > Calibrating delay loop (skipped), value calculated using timer frequency.. 4800.13 BogoMIPS (lpj=2400066) > Security Framework initialized > SELinux: Initializing. > SELinux: Starting in permissive mode > Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) > Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) > Mount-cache hash table entries: 256 > Initializing cgroup subsys ns > Initializing cgroup subsys cpuacct > CPU: L1 I cache: 32K, L1 D cache: 32K > CPU: L2 cache: 256K > CPU: L3 cache: 8192K > CPU 0/0x0 -> Node 0 > CPU: Unsupported number of siblings 16 > Performance Events: unsupported p6 CPU model 30 no PMU driver, software events only. > lockdep: fixing up alternatives. > SMP alternatives: switching to UP code > ACPI: Core revision 20090903 > alloc irq_desc for 1278 on node 0 > alloc kstat_irqs on node 0 > cpu 0 spinlock event irq 1278 > alloc irq_desc for 1277 on node 0 > alloc kstat_irqs on node 0 > alloc irq_desc for 1276 on node 0 > alloc kstat_irqs on node 0 > alloc irq_desc for 1275 on node 0 > alloc kstat_irqs on node 0 > alloc irq_desc for 1274 on node 0 > alloc kstat_irqs on node 0 > installing Xen timer for CPU 1 > alloc irq_desc for 1273 on node 0 > alloc kstat_irqs on node 0 > alloc irq_desc for 1272 on node 0 > alloc kstat_irqs on node 0 > cpu 1 spinlock event irq 1272 > lockdep: fixing up alternatives. > SMP alternatives: switching to SMP code > alloc irq_desc for 1271 on node 0 > alloc kstat_irqs on node 0 > alloc irq_desc for 1270 on node 0 > alloc kstat_irqs on node 0 > alloc irq_desc for 1269 on node 0 > alloc kstat_irqs on node 0 > alloc irq_desc for 1268 on node 0 > alloc kstat_irqs on node 0 > Initializing CPU#1 > CPU: L1 I cache: 32K, L1 D cache: 32K > CPU: L2 cache: 256K > CPU: L3 cache: 8192K > CPU 1/0x0 -> Node 0 > CPU: Unsupported number of siblings 16 > installing Xen timer for CPU 2 > alloc irq_desc for 1267 on node 0 > alloc kstat_irqs on node 0 > alloc irq_desc for 1266 on node 0 > alloc kstat_irqs on node 0 > cpu 2 spinlock event irq 1266 > alloc irq_desc for 1265 on node 0 > alloc kstat_irqs on node 0 > alloc irq_desc for 1264 on node 0 > alloc kstat_irqs on node 0 > alloc irq_desc for 1263 on node 0 > alloc kstat_irqs on node 0 > alloc irq_desc for 1262 on node 0 > alloc kstat_irqs on node 0 > Initializing CPU#2 > CPU: L1 I cache: 32K, L1 D cache: 32K > CPU: L2 cache: 256K > CPU: L3 cache: 8192K > CPU 2/0x0 -> Node 0 > CPU: Unsupported number of siblings 16 > installing Xen timer for CPU 3 > alloc irq_desc for 1261 on node 0 > alloc kstat_irqs on node 0 > alloc irq_desc for 1260 on node 0 > alloc kstat_irqs on node 0 > cpu 3 spinlock event irq 1260 > alloc irq_desc for 1259 on node 0 > alloc kstat_irqs on node 0 > alloc irq_desc for 1258 on node 0 > alloc kstat_irqs on node 0 > alloc irq_desc for 1257 on node 0 > alloc kstat_irqs on node 0 > alloc irq_desc for 1256 on node 0 > alloc kstat_irqs on node 0 > Initializing CPU#3 > CPU: L1 I cache: 32K, L1 D cache: 32K > CPU: L2 cache: 256K > CPU: L3 cache: 8192K > CPU 3/0x0 -> Node 0 > CPU: Unsupported number of siblings 16 > Brought up 4 CPUs > Grant table initialized > Time: 16:42:50 Date: 04/07/10 > NET: Registered protocol family 16 > alloc irq_desc for 1255 on node 0 > alloc kstat_irqs on node 0 > ACPI: bus type pci registered > PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 > PCI: MCFG area at e0000000 reserved in E820 > PCI: Using MMCONFIG at e0000000 - efffffff > PCI: Using configuration type 1 for base access > bio: create slab<bio-0> at 0 > ERROR: Unable to locate IOAPIC for GSI 9 > ACPI: EC: Look up EC in DSDT > ACPI Warning for \_SB_._OSC: Return type mismatch - found Integer, expected Buffer (20090903/nspredef-1006) > \_SB_:_OSC evaluation returned wrong type > _OSC request data:1 6 > ACPI: Executed 1 blocks of module-level executable AML code > ACPI: Interpreter enabled > ACPI: (supports S0 S1 S4 S5) > ACPI: Using IOAPIC for interrupt routing > ACPI Warning: Incorrect checksum in table [OEMB] - 91, should be 8E (20090903/tbutils-314) > ACPI Warning: Incorrect checksum in table [ ] - 7B, should be BF (20090903/tbutils-314) > ACPI: No dock devices found. > ACPI: PCI Root Bridge [PCI0] (0000:00) > pci 0000:00:03.0: PME# supported from D0 D3hot D3cold > pci 0000:00:03.0: PME# disabled > pci 0000:00:05.0: PME# supported from D0 D3hot D3cold > pci 0000:00:05.0: PME# disabled > pci 0000:00:1a.0: reg 10 32bit mmio: [0xfb3fc000-0xfb3fc3ff] > pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold > pci 0000:00:1a.0: PME# disabled > pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold > pci 0000:00:1c.0: PME# disabled > pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold > pci 0000:00:1c.4: PME# disabled > pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold > pci 0000:00:1c.5: PME# disabled > pci 0000:00:1d.0: reg 10 32bit mmio: [0xfb3fa000-0xfb3fa3ff] > pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold > pci 0000:00:1d.0: PME# disabled > pci 0000:00:1f.2: reg 10 io port: [0xb400-0xb407] > pci 0000:00:1f.2: reg 14 io port: [0xbc00-0xbc03] > pci 0000:00:1f.2: reg 18 io port: [0xb880-0xb887] > pci 0000:00:1f.2: reg 1c io port: [0xb800-0xb803] > pci 0000:00:1f.2: reg 20 io port: [0xb480-0xb49f] > pci 0000:00:1f.2: reg 24 32bit mmio: [0xfb3f8000-0xfb3f87ff] > pci 0000:00:1f.2: PME# supported from D3hot > pci 0000:00:1f.2: PME# disabled > pci 0000:00:1f.3: reg 10 64bit mmio: [0xfb3f6000-0xfb3f60ff] > pci 0000:00:1f.3: reg 20 io port: [0x400-0x41f] > pci 0000:03:00.0: reg 10 32bit mmio: [0xfb420000-0xfb43ffff] > pci 0000:03:00.0: reg 14 32bit mmio: [0xfb480000-0xfb4fffff] > pci 0000:03:00.0: reg 18 io port: [0xcc00-0xcc1f] > pci 0000:03:00.0: reg 1c 32bit mmio: [0xfb41c000-0xfb41ffff] > pci 0000:03:00.0: reg 30 32bit mmio pref: [0xfb440000-0xfb47ffff] > pci 0000:03:00.0: PME# supported from D0 D3hot D3cold > pci 0000:03:00.0: PME# disabled > pci 0000:00:1c.0: bridge io port: [0xc000-0xcfff] > pci 0000:00:1c.0: bridge 32bit mmio: [0xfb400000-0xfb4fffff] > pci 0000:04:00.0: reg 10 32bit mmio: [0xfb5e0000-0xfb5fffff] > pci 0000:04:00.0: reg 18 io port: [0xdc00-0xdc1f] > pci 0000:04:00.0: reg 1c 32bit mmio: [0xfb5dc000-0xfb5dffff] > pci 0000:04:00.0: PME# supported from D0 D3hot D3cold > pci 0000:04:00.0: PME# disabled > pci 0000:00:1c.4: bridge io port: [0xd000-0xdfff] > pci 0000:00:1c.4: bridge 32bit mmio: [0xfb500000-0xfb5fffff] > pci 0000:05:00.0: reg 10 32bit mmio: [0xfb6e0000-0xfb6fffff] > pci 0000:05:00.0: reg 18 io port: [0xec00-0xec1f] > pci 0000:05:00.0: reg 1c 32bit mmio: [0xfb6dc000-0xfb6dffff] > pci 0000:05:00.0: PME# supported from D0 D3hot D3cold > pci 0000:05:00.0: PME# disabled > pci 0000:00:1c.5: bridge io port: [0xe000-0xefff] > pci 0000:00:1c.5: bridge 32bit mmio: [0xfb600000-0xfb6fffff] > pci 0000:06:03.0: reg 10 32bit mmio pref: [0xfa000000-0xfaffffff] > pci 0000:06:03.0: reg 14 32bit mmio: [0xfb7fc000-0xfb7fffff] > pci 0000:06:03.0: reg 18 32bit mmio: [0xfb800000-0xfbffffff] > pci 0000:00:1e.0: transparent bridge > pci 0000:00:1e.0: bridge 32bit mmio: [0xfb700000-0xfbffffff] > pci 0000:00:1e.0: bridge 64bit mmio pref: [0xfa000000-0xfaffffff] > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3._PRT] > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT] > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR1E._PRT] > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR20._PRT] > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR24._PRT] > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR25._PRT] > (XEN) PCI add device 00:00.0 > (XEN) PCI add device 00:03.0 > (XEN) PCI add device 00:05.0 > (XEN) PCI add device 00:08.0 > (XEN) PCI add device 00:08.1 > (XEN) PCI add device 00:08.2 > (XEN) PCI add device 00:08.3 > (XEN) PCI add device 00:10.0 > (XEN) PCI add device 00:10.1 > (XEN) PCI add device 00:1a.0 > (XEN) PCI add device 00:1c.0 > (XEN) PCI add device 00:1c.4 > (XEN) PCI add device 00:1c.5 > (XEN) PCI add device 00:1d.0 > (XEN) PCI add device 00:1e.0 > (XEN) PCI add device 00:1f.0 > (XEN) PCI add device 00:1f.2 > (XEN) PCI add device 00:1f.3 > (XEN) PCI add device 03:00.0 > (XEN) PCI add device 04:00.0 > (XEN) PCI add device 05:00.0 > (XEN) PCI add device 06:03.0 > ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12 14 15) > ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 6 7 10 *11 12 14 15) > ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 *10 11 12 14 15) > ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12 *14 15) > ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled. > ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 *7 10 11 12 14 15) > ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled. > ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 6 7 10 11 12 14 *15) > sync cpu 0 get result 1 max_id 3 > sync cpu 1 get result 1 max_id 3 > sync cpu 2 get result 1 max_id 3 > sync cpu 3 get result 1 max_id 3 > alloc irq_desc for 1254 on node 0 > alloc kstat_irqs on node 0 > xen_balloon: Initialising balloon driver with page order 0. > vgaarb: device added: PCI:0000:06:03.0,decodes=io+mem,owns=io+mem,locks=none > vgaarb: loaded > SCSI subsystem initialized > libata version 3.00 loaded. > usbcore: registered new interface driver usbfs > usbcore: registered new interface driver hub > usbcore: registered new device driver usb > PCI: Using ACPI for IRQ routing > NetLabel: Initializing > NetLabel: domain hash size = 128 > NetLabel: protocols = UNLABELED CIPSOv4 > NetLabel: unlabeled traffic allowed by default > Switching to clocksource xen > pnp: PnP ACPI init > ACPI: bus type pnp registered > xen: registering gsi 8 triggering 1 polarity 0 > xen_allocate_pirq: returning irq 8 for gsi 8 > xen:scsi0 : ahci > scsi1 : ahci > scsi2 : ahci > scsi3 : ahci > scsi4 : ahci > scsi5 : ahci > ata1: SATA max UDMA/133 abar m2048@0xfb3f8000 port 0xfb3f8100 irq 1247 > ata2: SATA max UDMA/133 abar m2048@0xfb3f8000 port 0xfb3f8180 irq 1247 > ata3: SATA max UDMA/133 abar m2048@0xfb3f8000 port 0xfb3f8200 irq 1247 > ata4: SATA max UDMA/133 abar m2048@0xfb3f8000 port 0xfb3f8280 irq 1247 > ata5: SATA max UDMA/133 abar m2048@0xfb3f8000 port 0xfb3f8300 irq 1247 > ata6: SATA max UDMA/133 abar m2048@0xfb3f8000 port 0xfb3f8380 irq 1247 > usb 1-1: udev 2, busnum 1, minor = 1 > usb 1-1: New USB device found, idVendor=8087, idProduct=0020 > usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 > usb 1-1: usb_probe_device > usb 1-1: configuration #1 chosen from 1 choice > usb 1-1: adding 1-1:1.0 (config #1, interface 0) > hub 1-1:1.0: usb_probe_interface > hub 1-1:1.0: usb_probe_interface - got id > hub 1-1:1.0: USB hub found > hub 1-1:1.0: 6 ports detected > hub 1-1:1.0: standalone hub > hub 1-1:1.0: individual port power switching > hub 1-1:1.0: individual port over-current protection > hub 1-1:1.0: Single TT > hub 1-1:1.0: TT requires at most 8 FS bit times (666 ns) > hub 1-1:1.0: Port indicators are supported > hub 1-1:1.0: power on to power good time: 100ms > hub 1-1:1.0: local power source is good > hub 1-1:1.0: enabling power on all ports > hub 2-0:1.0: state 7 ports 2 chg 0002 evt 0000 > hub 2-0:1.0: port 1, status 0501, change 0000, 480 Mb/s > ehci_hcd 0000:00:1d.0: port 1 high speed > ehci_hcd 0000:00:1d.0: GetStatus port 1 status 001005 POWER sig=se0 PE CONNECT > hub 1-1:1.0: port 2: status 0101 change 0001 > usb 2-1: new high speed USB device using ehci_hcd and address 2 > ehci_hcd 0000:00:1d.0: port 1 high speed > ehci_hcd 0000:00:1d.0: GetStatus port 1 status 001005 POWER sig=se0 PE CONNECT > usb 1-1: link qh256-0001/ffff8800bcd9ab40 start 1 [1/0 us] > usb 2-1: udev 2, busnum 2, minor = 129 > usb 2-1: New USB device found, idVendor=8087, idProduct=0020 > usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 > usb 2-1: usb_probe_device > usb 2-1: configuration #1 chosen from 1 choice > usb 2-1: adding 2-1:1.0 (config #1, interface 0) > hub 2-1:1.0: usb_probe_interface > hub 2-1:1.0: usb_probe_interface - got id > hub 2-1:1.0: USB hub found > hub 2-1:1.0: 8 ports detected > hub 2-1:1.0: standalone hub > hub 2-1:1.0: individual port power switching > hub 2-1:1.0: individual port over-current protection > hub 2-1:1.0: Single TT > hub 2-1:1.0: TT requires at most 8 FS bit times (666 ns) > hub 2-1:1.0: Port indicators are supported > hub 2-1:1.0: power on to power good time: 100ms > hub 2-1:1.0: local power source is good > hub 2-1:1.0: enabling power on all ports > hub 1-1:1.0: state 7 ports 6 chg 0004 evt 0000 > hub 1-1:1.0: port 2, status 0101, change 0000, 12 Mb/s > usb 1-1.2: new full speed USB device using ehci_hcd and address 3 > hub 1-1:1.0: port 2 not reset yet, waiting 10ms > ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) > ata1.00: ATA-8: WDC WD10EADS-00P8B0, 01.00A01, max UDMA/133 > ata1.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA > ata1.00: configured for UDMA/133 > scsi 0:0:0:0: Direct-Access ATA WDC WD10EADS-00P 01.0 PQ: 0 ANSI: 5 > sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) > sd 0:0:0:0: [sda] Write Protect is off > sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 > sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA > sd 0:0:0:0: Attached scsi generic sg0 type 0 > sda: > usb 2-1: link qh256-0001/ffff8800be450cc0 start 1 [1/0 us] > sda1 sda2 sda3 sda4 > sd 0:0:0:0: [sda] Attached SCSI disk > usb 1-1.2: skipped 1 descriptor after interface > usb 1-1.2: skipped 1 descriptor after interface > usb 1-1.2: default language 0x0409 > usb 1-1.2: udev 3, busnum 1, minor = 2 > usb 1-1.2: New USB device found, idVendor=0557, idProduct=2221 > usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 > usb 1-1.2: Product: Hermon USB hidmouse Device > usb 1-1.2: Manufacturer: Winbond Electronics Corp > usb 1-1.2: usb_probe_device > usb 1-1.2: configuration #1 chosen from 1 choice > usb 1-1.2: adding 1-1.2:1.0 (config #1, interface 0) > usbhid 1-1.2:1.0: usb_probe_interface > usbhid 1-1.2:1.0: usb_probe_interface - got id > input: Winbond Electronics Corp Hermon USB hidmouse Device as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input4 > generic-usb 0003:0557:2221.0001: input,hidraw0: USB HID v1.00 Mouse [Winbond Electronics Corp Hermon USB hidmouse Device] on usb-0000:00:1a.0-1.2/input0 > usb 1-1.2: adding 1-1.2:1.1 (config #1, interface 1) > usbhid 1-1.2:1.1: usb_probe_interface > usbhid 1-1.2:1.1: usb_probe_interface - got id > input: Winbond Electronics Corp Hermon USB hidmouse Device as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.1/input/input5 > usb 1-1.2: link qh8-0601/ffff8800bc52e440 start 2 [1/2 us] > generic-usb 0003:0557:2221.0002: input,hidraw1: USB HID v1.00 Keyboard [Winbond Electronics Corp Hermon USB hidmouse Device] on usb-0000:00:1a.0-1.2/input1 > hub 2-1:1.0: state 7 ports 8 chg 0000 evt 0000 > hub 1-1:1.0: state 7 ports 6 chg 0000 evt 0004 > ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) > ata2.00: ATA-7: SAMSUNG HD103SI, 1AG01118, max UDMA7 > ata2.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA > ata2.00: configured for UDMA/133 > scsi 1:0:0:0: Direct-Access ATA SAMSUNG HD103SI 1AG0 PQ: 0 ANSI: 5 > sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) > sd 1:0:0:0: Attached scsi generic sg1 type 0 > sd 1:0:0:0: [sdb] Write Protect is off > sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 > sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA > sdb: sdb1 sdb2 sdb3 sdb4 > sd 1:0:0:0: [sdb] Attached SCSI disk > input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input6 > ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) > ata3.00: ATA-8: WDC WD10EADS-00P8B0, 01.00A01, max UDMA/133 > ata3.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA > ata3.00: configured for UDMA/133 > scsi 2:0:0:0: Direct-Access ATA WDC WD10EADS-00P 01.0 PQ: 0 ANSI: 5 > sd 2:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) > sd 2:0:0:0: Attached scsi generic sg2 type 0 > sd 2:0:0:0: [sdc] Write Protect is off > sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 > sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA > sdc: sdc1 sdc2 sdc3 sdc4 > sd 2:0:0:0: [sdc] Attached SCSI disk > hub 2-1:1.0: hub_suspend > usb 2-1: unlink qh256-0001/ffff8800be450cc0 start 1 [1/0 us] > usb 2-1: usb auto-suspend > ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) > ata4.00: ATA-7: SAMSUNG HD103SI, 1AG01118, max UDMA7 > ata4.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA > ata4.00: configured for UDMA/133 > scsi 3:0:0:0: Direct-Access ATA SAMSUNG HD103SI 1AG0 PQ: 0 ANSI: 5 > sd 3:0:0:0: [sdd] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) > sd 3:0:0:0: Attached scsi generic sg3 type 0 > sd 3:0:0:0: [sdd] Write Protect is off > sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00 > sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA > sdd: sdd1 sdd2 sdd3 sdd4 > sd 3:0:0:0: [sdd] Attached SCSI disk > ata5: SATA link down (SStatus 0 SControl 300) > ata6: SATA link down (SStatus 0 SControl 300) > md: raid10 personality registered for level 10 > Intel AES-NI instructions are not detected. > md: md0 stopped. > md: bind<sdb3> > md: bind<sdc3> > md: bind<sdd3> > md: bind<sda3> > raid10: md0 is not clean -- starting background reconstruction > raid10: raid set md0 active with 4 out of 4 devices > md0: detected capacity change from 0 to 838860668928 > md: resync of RAID array md0 > md: minimum _guaranteed_ speed: 1000 KB/sec/disk. > md: using maximum available idle IO bandwidth (but not more than 200000 KB/sec) for resync. > md: using 128k window, over a total of 819199872 blocks. > (XEN) [VT-D]iommu.c:821: iommu_fault_status: Primary Pending Fault > (XEN) [VT-D]iommu.c:796: DMAR:[DMA Write] Request device [00:1f.2] fault addr bf579000, iommu reg = ffff82c3fff57000 > (XEN) DMAR:[fault reason 05h] PTE Write access is not set > (XEN) print_vtd_entries: iommu = ffff83013fff3e80 bdf = 0:1f.2 gmfn = bf579 > (XEN) root_entry = ffff83013ff36000 > (XEN) root_entry[0] = 13c6bb001 > (XEN) context = ffff83013c6bb000 > (XEN) context[fa] = 2_13fec4001 > (XEN) l4 = ffff83013fec4000 > (XEN) l4_index = 0 > (XEN) l4[0] = 13fec1003 > (XEN) l3 = ffff83013fec1000 > (XEN) l3_index = 2 > (XEN) l3[2] = 13ccbe003 > (XEN) l2 = ffff83013ccbe000 > (XEN) l2_index = 1fa > (XEN) l2[1fa] = 13cac3003 > (XEN) l1 = ffff83013cac3000 > (XEN) l1_index = 179 > (XEN) l1[179] = 0 > (XEN) l1[179] not present > (XEN) [VT-D]iommu.c:796: DMAR:[DMA Write] Request device [00:1f.2] fault addr bf579000, iommu reg = ffff82c3fff57000 > (XEN) DMAR:[fault reason 05h] PTE Write access is not set > (XEN) print_vtd_entries: iommu = ffff83013fff3e80 bdf = 0:1f.2 gmfn = bf579 > (XEN) root_entry = ffff83013ff36000 > (XEN) root_entry[0] = 13c6bb001 > (XEN) context = ffff83013c6bb000 > (XEN) context[fa] = 2_13fec4001 > (XEN) l4 = ffff83013fec4000 > (XEN) l4_index = 0 > (XEN) l4[0] = 13fec1003 > (XEN) l3 = ffff83013fec1000 > (XEN) l3_index = 2 > (XEN) l3[2] = 13ccbe003 > (XEN) l2 = ffff83013ccbe000 > (XEN) l2_index = 1fa > (XEN) l2[1fa] = 13cac3003 > (XEN) l1 = ffff83013cac3000 > (XEN) l1_index = 179 > (XEN) l1[179] = 0 > (XEN) l1[179] not present > (XEN) [VT-D]iommu.c:796: DMAR:[DMA Write] Request device [00:1f.2] fault addr bf578000, iommu reg = ffff82c3fff57000 > (XEN) DMAR:[fault reason 05h] PTE Write access is not set > (XEN) print_vtd_entries: iommu = ffff83013fff3e80 bdf = 0:1f.2 gmfn = bf578 > (XEN) root_entry = ffff83013ff36000 > (XEN) root_entry[0] = 13c6bb001 > (XEN) context = ffff83013c6bb000 > (XEN) context[fa] = 2_13fec4001 > (XEN) l4 = ffff83013fec4000 > (XEN) l4_index = 0 > (XEN) l4[0] = 13fec1003 > (XEN) l3 = ffff83013fec1000 > (XEN) l3_index = 2 > (XEN) l3[2] = 13ccbe003 > (XEN) l2 = ffff83013ccbe000 > (XEN) l2_index = 1fa > (XEN) l2[1fa] = 13cac3003 > (XEN) l1 = ffff83013cac3000 > (XEN) l1_index = 178 > (XEN) l1[178] = 0 > (XEN) l1[178] not present > (XEN) [VT-D]iommu.c:796: DMAR:[DMA Write] Request device [00:1f.2] fault addr bf578000, iommu reg = ffff82c3fff57000 > (XEN) DMAR:[fault reason 05h] PTE Write access is not set > (XEN) print_vtd_entries: iommu = ffff83013fff3e80 bdf = 0:1f.2 gmfn = bf578 > (XEN) root_entry = ffff83013ff36000 > (XEN) root_entry[0] = 13c6bb001 > (XEN) context = ffff83013c6bb000 > (XEN) context[fa] = 2_13fec4001 > (XEN) l4 = ffff83013fec4000 > (XEN) l4_index = 0 > (XEN) l4[0] = 13fec1003 > (XEN) l3 = ffff83013fec1000 > (XEN) l3_index = 2 > (XEN) l3[2] = 13ccbe003 > (XEN) l2 = ffff83013ccbe000 > (XEN) l2_index = 1fa > (XEN) l2[1fa] = 13cac3003 > (XEN) l1 = ffff83013cac3000 > (XEN) l1_index = 178 > (XEN) l1[178] = 0 > (XEN) l1[178] not present > (XEN) [VT-D]iommu.c:821: iommu_fault_status: Primary Pending Fault > (XEN) [VT-D]iommu.c:796: DMAR:[DMA Write] Request device [00:1f.2] fault addr bf57b000, iommu reg = ffff82c3fff57000 > (XEN) DMAR:[fault reason 05h] PTE Write access is not set > (XEN) print_vtd_entries: iommu = ffff83013fff3e80 bdf = 0:1f.2 gmfn = bf57b > (XEN) root_entry = ffff83013ff36000 > (XEN) root_entry[0] = 13c6bb001 > (XEN) context = ffff83013c6bb000 > (XEN) context[fa] = 2_13fec4001 > (XEN) l4 = ffff83013fec4000 > (XEN) l4_index = 0 > (XEN) l4[0] = 13fec1003 > (XEN) l3 = ffff83013fec1000 > (XEN) l3_index = 2 > (XEN) l3[2] = 13ccbe003 > (XEN) l2 = ffff83013ccbe000 > (XEN) l2_index = 1fa > (XEN) l2[1fa] = 13cac3003 > (XEN) l1 = ffff83013cac3000 > (XEN) l1_index = 17b > (XEN) l1[17b] = 0 > (XEN) l1[17b] not present > (XEN) [VT-D]iommu.c:796: DMAR:[DMA Write] Request device [00:1f.2] fault addr bf57b000, iommu reg = ffff82c3fff57000 > (XEN) DMAR:[fault reason 05h] PTE Write access is not set > (XEN) print_vtd_entries: iommu = ffff83013fff3e80 bdf = 0:1f.2 gmfn = bf57b > (XEN) root_entry = ffff83013ff36000 > (XEN) root_entry[0] = 13c6bb001 > (XEN) context = ffff83013c6bb000 > (XEN) context[fa] = 2_13fec4001 > (XEN) l4 = ffff83013fec4000 > (XEN) l4_index = 0 > (XEN) l4[0] = 13fec1003 > (XEN) l3 = ffff83013fec1000 > (XEN) l3_index = 2 > (XEN) l3[2] = 13ccbe003 > (XEN) l2 = ffff83013ccbe000 > (XEN) l2_index = 1fa > (XEN) l2[1fa] = 13cac3003 > (XEN) l1 = ffff83013cac3000 > (XEN) l1_index = 17b > (XEN) l1[17b] = 0 > (XEN) l1[17b] not present > md0:(XEN) [VT-D]iommu.c:821: iommu_fault_status: Primary Pending Fault > (XEN) [VT-D]iommu.c:796: DMAR:[DMA Read] Request device [00:1f.2] fault addr bf57b000, iommu reg = ffff82c3fff57000 > (XEN) DMAR:[fault reason 06h] PTE Read access is not set > (XEN) print_vtd_entries: iommu = ffff83013fff3e80 bdf = 0:1f.2 gmfn = bf57b > (XEN) root_entry = ffff83013ff36000 > (XEN) root_entry[0] = 13c6bb001 > (XEN) context = ffff83013c6bb000 > (XEN) context[fa] = 2_13fec4001 > (XEN) l4 = ffff83013fec4000 > (XEN) l4_index = 0 > (XEN) l4[0] = 13fec1003 > (XEN) l3 = ffff83013fec1000 > (XEN) l3_index = 2 > (XEN) l3[2] = 13ccbe003 > (XEN) l2 = ffff83013ccbe000 > (XEN) l2_index = 1fa > (XEN) l2[1fa] = 13cac3003 > (XEN) l1 = ffff83013cac3000 > (XEN) l1_index = 17b > (XEN) l1[17b] = 0 > (XEN) l1[17b] not present > > ata2.00: exception Emask 0x60 SAct 0x1 SErr 0x800 action 0x6 frozen > ata2.00: irq_stat 0x20000000, host bus error > ata2: SError: { HostInt } > ata2.00: failed command: WRITE FPDMA QUEUED > ata2.00: cmd 61/80:00:c3:aa:a0/00:00:0c:00:00/40 tag 0 ncq 65536 out > res 40/00:04:c3:aa:a0/00:00:0c:00:00/40 Emask 0x60 (host bus error) > ata2.00: status: { DRDY } > ata2: hard resetting link > ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) > ata2.00: configured for UDMA/133 > ata2: EH complete > (XEN) [VT-D]iommu.c:821: iommu_fault_status: Primary Pending Fault > (XEN) [VT-D]iommu.c:796: DMAR:[DMA Read] Request device [00:1f.2] fault addr bf57b000, iommu reg = ffff82c3fff57000 > (XEN) DMAR:[fault reason 06h] PTE Read access is not set > (XEN) print_vtd_entries: iommu = ffff83013fff3e80 bdf = 0:1f.2 gmfn = bf57b > (XEN) root_entry = ffff83013ff36000 > (XEN) root_entry[0] = 13c6bb001 > (XEN) context = ffff83013c6bb000 > (XEN) context[fa] = 2_13fec4001 > (XEN) l4 = ffff83013fec4000 > (XEN) l4_index = 0 > (XEN) l4[0] = 13fec1003 > (XEN) l3 = ffff83013fec1000 > (XEN) l3_index = 2 > (XEN) l3[2] = 13ccbe003 > (XEN) l2 = ffff83013ccbe000 > (XEN) l2_index = 1fa > (XEN) l2[1fa] = 13cac3003 > (XEN) l1 = ffff83013cac3000 > (XEN) l1_index = 17b > (XEN) l1[17b] = 0 > (XEN) l1[17b] not present > ata2.00: exception Emask 0x60 SAct 0x1 SErr 0x800 action 0x6 frozen > ata2.00: irq_stat 0x20000000, host bus error > ata2: SError: { HostInt } > ata2.00: failed command: WRITE FPDMA QUEUED > ata2.00: cmd 61/80:00:c3:aa:a0/00:00:0c:00:00/40 tag 0 ncq 65536 out > res 40/00:04:c3:aa:a0/00:00:0c:00:00/40 Emask 0x60 (host bus error) > ata2.00: status: { DRDY } > ata2: hard resetting link > ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) > ata2.00: configured for UDMA/133 > ata2: EH complete > (XEN) [VT-D]iommu.c:821: iommu_fault_status: Primary Pending Fault > (XEN) [VT-D]iommu.c:796: DMAR:[DMA Read] Request device [00:1f.2] fault addr bf57b000, iommu reg = ffff82c3fff57000 > (XEN) DMAR:[fault reason 06h] PTE Read access is not set > (XEN) print_vtd_entries: iommu = ffff83013fff3e80 bdf = 0:1f.2 gmfn = bf57b > (XEN) root_entry = ffff83013ff36000 > (XEN) root_entry[0] = 13c6bb001 > (XEN) context = ffff83013c6bb000 > (XEN) context[fa] = 2_13fec4001 > (XEN) l4 = ffff83013fec4000 > (XEN) l4_index = 0 > (XEN) l4[0] = 13fec1003 > (XEN) l3 = ffff83013fec1000 > (XEN) l3_index = 2 > (XEN) l3[2] = 13ccbe003 > (XEN) l2 = ffff83013ccbe000 > (XEN) l2_index = 1fa > (XEN) l2[1fa] = 13cac3003 > (XEN) l1 = ffff83013cac3000 > (XEN) l1_index = 17b > (XEN) l1[17b] = 0 > (XEN) l1[17b] not present > ata2.00: exception Emask 0x60 SAct 0x1 SErr 0x800 action 0x6 frozen > ata2.00: irq_stat 0x20000000, host bus error > ata2: SError: { HostInt } > ata2.00: failed command: WRITE FPDMA QUEUED > ata2.00: cmd 61/80:00:c3:aa:a0/00:00:0c:00:00/40 tag 0 ncq 65536 out > res 40/00:04:c3:aa:a0/00:00:0c:00:00/40 Emask 0x60 (host bus error) > ata2.00: status: { DRDY } > ata2: hard resetting link > ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) > ata2.00: configured for UDMA/133 > ata2: EH complete > (XEN) [VT-D]iommu.c:821: iommu_fault_status: Primary Pending Fault > (XEN) [VT-D]iommu.c:796: DMAR:[DMA Read] Request device [00:1f.2] fault addr bf57b000, iommu reg = ffff82c3fff57000 > (XEN) DMAR:[fault reason 06h] PTE Read access is not set > (XEN) print_vtd_entries: iommu = ffff83013fff3e80 bdf = 0:1f.2 gmfn = bf57b > (XEN) root_entry = ffff83013ff36000 > (XEN) root_entry[0] = 13c6bb001 > (XEN) context = ffff83013c6bb000 > (XEN) context[fa] = 2_13fec4001 > (XEN) l4 = ffff83013fec4000 > (XEN) l4_index = 0 > (XEN) l4[0] = 13fec1003 > (XEN) l3 = ffff83013fec1000 > (XEN) l3_index = 2 > (XEN) l3[2] = 13ccbe003 > (XEN) l2 = ffff83013ccbe000 > (XEN) l2_index = 1fa > (XEN) l2[1fa] = 13cac3003 > (XEN) l1 = ffff83013cac3000 > (XEN) l1_index = 17b > (XEN) l1[17b] = 0 > (XEN) l1[17b] not present > ata2.00: exception Emask 0x60 SAct 0x1 SErr 0x800 action 0x6 frozen > ata2.00: irq_stat 0x20000000, host bus error > ata2: SError: { HostInt } > ata2.00: failed command: WRITE FPDMA QUEUED > ata2.00: cmd 61/80:00:c3:aa:a0/00:00:0c:00:00/40 tag 0 ncq 65536 out > res 40/00:04:c3:aa:a0/00:00:0c:00:00/40 Emask 0x60 (host bus error) > ata2.00: status: { DRDY } > ata2: hard resetting link > ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) > ata2.00: configured for UDMA/133 > ata2: EH complete > (XEN) [VT-D]iommu.c:821: iommu_fault_status: Primary Pending Fault > (XEN) [VT-D]iommu.c:796: DMAR:[DMA Read] Request device [00:1f.2] fault addr bf57b000, iommu reg = ffff82c3fff57000 > (XEN) DMAR:[fault reason 06h] PTE Read access is not set > (XEN) print_vtd_entries: iommu = ffff83013fff3e80 bdf = 0:1f.2 gmfn = bf57b > (XEN) root_entry = ffff83013ff36000 > (XEN) root_entry[0] = 13c6bb001 > (XEN) context = ffff83013c6bb000 > (XEN) context[fa] = 2_13fec4001 > (XEN) l4 = ffff83013fec4000 > (XEN) l4_index = 0 > (XEN) l4[0] = 13fec1003 > (XEN) l3 = ffff83013fec1000 > (XEN) l3_index = 2 > (XEN) l3[2] = 13ccbe003 > (XEN) l2 = ffff83013ccbe000 > (XEN) l2_index = 1fa > (XEN) l2[1fa] = 13cac3003 > (XEN) l1 = ffff83013cac3000 > (XEN) l1_index = 17b > (XEN) l1[17b] = 0 > (XEN) l1[17b] not present > ata2.00: exception Emask 0x60 SAct 0x1 SErr 0x800 action 0x6 frozen > ata2.00: irq_stat 0x20000000, host bus error > ata2: SError: { HostInt } > ata2.00: failed command: WRITE FPDMA QUEUED > ata2.00: cmd 61/80:00:c3:aa:a0/00:00:0c:00:00/40 tag 0 ncq 65536 out > res 40/00:04:c3:aa:a0/00:00:0c:00:00/40 Emask 0x60 (host bus error) > ata2.00: status: { DRDY } > ata2: hard resetting link > hub 2-0:1.0: hub_suspend > usb usb2: bus auto-suspend > ehci_hcd 0000:00:1d.0: suspend root hub > ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) > ata2.00: configured for UDMA/133 > ata2: EH complete > (XEN) [VT-D]iommu.c:821: iommu_fault_status: Primary Pending Fault > (XEN) [VT-D]iommu.c:796: DMAR:[DMA Read] Request device [00:1f.2] fault addr bf57b000, iommu reg = ffff82c3fff57000 > (XEN) DMAR:[fault reason 06h] PTE Read access is not set > (XEN) print_vtd_entries: iommu = ffff83013fff3e80 bdf = 0:1f.2 gmfn = bf57b > (XEN) root_entry = ffff83013ff36000 > (XEN) root_entry[0] = 13c6bb001 > (XEN) context = ffff83013c6bb000 > (XEN) context[fa] = 2_13fec4001 > (XEN) l4 = ffff83013fec4000 > (XEN) l4_index = 0 > (XEN) l4[0] = 13fec1003 > (XEN) l3 = ffff83013fec1000 > (XEN) l3_index = 2 > (XEN) l3[2] = 13ccbe003 > (XEN) l2 = ffff83013ccbe000 > (XEN) l2_index = 1fa > (XEN) l2[1fa] = 13cac3003 > (XEN) l1 = ffff83013cac3000 > (XEN) l1_index = 17b > (XEN) l1[17b] = 0 > (XEN) l1[17b] not present > ata2.00: exception Emask 0x60 SAct 0x1 SErr 0x800 action 0x6 frozen > ata2.00: irq_stat 0x20000000, host bus error > ata2: SError: { HostInt } > ata2.00: failed command: WRITE FPDMA QUEUED > ata2.00: cmd 61/80:00:c3:aa:a0/00:00:0c:00:00/40 tag 0 ncq 65536 out > res 40/00:04:c3:aa:a0/00:00:0c:00:00/40 Emask 0x60 (host bus error) > ata2.00: status: { DRDY } > ata2: hard resetting link > ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) > ata2.00: configured for UDMA/133 > sd 1:0:0:0: [sdb] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE > sd 1:0:0:0: [sdb] Sense Key : Aborted Command [current] [descriptor] > Descriptor sense data with sense descriptors (in hex): > 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 > 0c a0 aa c3 > sd 1:0:0:0: [sdb] Add. Sense: No additional sense information > sd 1:0:0:0: [sdb] CDB: Write(10): 2a 00 0c a0 aa c3 00 00 80 00 > end_request: I/O error, dev sdb, sector 211856067 > raid10: Disk failure on sdb3, disabling device. > raid10: Operation continuing on 3 devices. > ata2: EH complete > unknown partition table > md: md0: resync done. > md: checkpointing resync of md0. > RAID10 conf printout: > --- wd:3 rd:4 > disk 0, wo:0, o:1, dev:sda3 > disk 1, wo:1, o:0, dev:sdb3 > disk 2, wo:0, o:1, dev:sdc3 > disk 3, wo:0, o:1, dev:sdd3 > RAID10 conf printout: > --- wd:3 rd:4 > disk 0, wo:0, o:1, dev:sda3 > disk 2, wo:0, o:1, dev:sdc3 > disk 3, wo:0, o:1, dev:sdd3 > md: resync of RAID array md0 > md: minimum _guaranteed_ speed: 1000 KB/sec/disk. > md: using maximum available idle IO bandwidth (but not more than 200000 KB/sec) for resync. > md: using 128k window, over a total of 819199872 blocks. > md: resuming resync of md0 from checkpoint. > (XEN) [VT-D]iommu.c:821: iommu_fault_status: Primary Pending Fault > (XEN) [VT-D]iommu.c:796: DMAR:[DMA Write] Request device [00:1f.2] fault addr bf578000, iommu reg = ffff82c3fff57000 > (XEN) DMAR:[fault reason 05h] PTE Write access is not set > (XEN) print_vtd_entries: iommu = ffff83013fff3e80 bdf = 0:1f.2 gmfn = bf578 > (XEN) root_entry = ffff83013ff36000 > (XEN) root_entry[0] = 13c6bb001 > (XEN) context = ffff83013c6bb000 > (XEN) context[fa] = 2_13fec4001 > (XEN) l4 = ffff83013fec4000 > (XEN) l4_index = 0 > (XEN) l4[0] = 13fec1003 > (XEN) l3 = ffff83013fec1000 > (XEN) l3_index = 2 > (XEN) l3[2] = 13ccbe003 > (XEN) l2 = ffff83013ccbe000 > (XEN) l2_index = 1fa > (XEN) l2[1fa] = 13cac3003 > (XEN) l1 = ffff83013cac3000 > (XEN) l1_index = 178 > (XEN) l1[178] = 0 > (XEN) l1[178] not present > (XEN) [VT-D]iommu.c:796: DMAR:[DMA Write] Request device [00:1f.2] fault addr bf579000, iommu reg = ffff82c3fff57000 > (XEN) DMAR:[fault reason 05h] PTE Write access is not set > (XEN) print_vtd_entries: iommu = ffff83013fff3e80 bdf = 0:1f.2 gmfn = bf579 > (XEN) root_entry = ffff83013ff36000 > (XEN) root_entry[0] = 13c6bb001 > (XEN) context = ffff83013c6bb000 > (XEN) context[fa] = 2_13fec4001 > (XEN) l4 = ffff83013fec4000 > (XEN) l4_index = 0 > (XEN) l4[0] = 13fec1003 > (XEN) l3 = ffff83013fec1000 > (XEN) l3_index = 2 > (XEN) l3[2] = 13ccbe003 > (XEN) l2 = ffff83013ccbe000 > (XEN) l2_index = 1fa > (XEN) l2[1fa] = 13cac3003 > (XEN) l1 = ffff83013cac3000 > (XEN) l1_index = 179 > (XEN) l1[179] = 0 > (XEN) l1[179] not present > (XEN) [VT-D]iommu.c:821: iommu_fault_status: Primary Pending Fault > (XEN) [VT-D]iommu.c:796: DMAR:[DMA Write] Request device [00:1f.2] fault addr bf57b000, iommu reg = ffff82c3fff57000 > (XEN) DMAR:[fault reason 05h] PTE Write access is not set > (XEN) print_vtd_entries: iommu = ffff83013fff3e80 bdf = 0:1f.2 gmfn = bf57b > (XEN) root_entry = ffff83013ff36000 > (XEN) root_entry[0] = 13c6bb001 > (XEN) context = ffff83013c6bb000 > (XEN) context[fa] = 2_13fec4001 > (XEN) l4 = ffff83013fec4000 > (XEN) l4_index = 0 > (XEN) l4[0] = 13fec1003 > (XEN) l3 = ffff83013fec1000 > (XEN) l3_index = 2 > (XEN) l3[2] = 13ccbe003 > (XEN) l2 = ffff83013ccbe000 > (XEN) l2_index = 1fa > (XEN) l2[1fa] = 13cac3003 > (XEN) l1 = ffff83013cac3000 > (XEN) l1_index = 17b > (XEN) l1[17b] = 0 > (XEN) l1[17b] not present > (XEN) [VT-D]iommu.c:796: DMAR:[DMA Write] Request device [00:1f.2] fault addr bf57b000, iommu reg = ffff82c3fff57000 > (XEN) DMAR:[fault reason 05h] PTE Write access is not set > (XEN) print_vtd_entries: iommu = ffff83013fff3e80 bdf = 0:1f.2 gmfn = bf57b > (XEN) root_entry = ffff83013ff36000 > (XEN) root_entry[0] = 13c6bb001 > (XEN) context = ffff83013c6bb000 > (XEN) context[fa] = 2_13fec4001 > (XEN) l4 = ffff83013fec4000 > (XEN) l4_index = 0 > (XEN) l4[0] = 13fec1003 > (XEN) l3 = ffff83013fec1000 > (XEN) l3_index = 2 > (XEN) l3[2] = 13ccbe003 > (XEN) l2 = ffff83013ccbe000 > (XEN) l2_index = 1fa > (XEN) l2[1fa] = 13cac3003 > (XEN) l1 = ffff83013cac3000 > (XEN) l1_index = 17b > (XEN) l1[17b] = 0 > (XEN) l1[17b] not present > (XEN) [VT-D]iommu.c:821: iommu_fault_status: Primary Pending Fault > (XEN) [VT-D]iommu.c:796: DMAR:[DMA Read] Request device [00:1f.2] fault addr bf57b000, iommu reg = ffff82c3fff57000 > (XEN) DMAR:[fault reason 06h] PTE Read access is not set > (XEN) print_vtd_entries: iommu = ffff83013fff3e80 bdf = 0:1f.2 gmfn = bf57b > (XEN) root_entry = ffff83013ff36000 > (XEN) root_entry[0] = 13c6bb001 > (XEN) context = ffff83013c6bb000 > (XEN) context[fa] = 2_13fec4001 > (XEN) l4 = ffff83013fec4000 > (XEN) l4_index = 0 > (XEN) l4[0] = 13fec1003 > (XEN) l3 = ffff83013fec1000 > (XEN) l3_index = 2 > (XEN) l3[2] = 13ccbe003 > (XEN) l2 = ffff83013ccbe000 > (XEN) l2_index = 1fa > (XEN) l2[1fa] = 13cac3003 > (XEN) l1 = ffff83013cac3000 > (XEN) l1_index = 17b > (XEN) l1[17b] = 0 > (XEN) l1[17b] not present > ata4.00: exception Emask 0x60 SAct 0x1 SErr 0x800 action 0x6 frozen > ata4.00: irq_stat 0x20000000, host bus error > ata4: SError: { HostInt } > ata4.00: failed command: WRITE FPDMA QUEUED > ata4.00: cmd 61/80:00:43:b2:a1/00:00:0c:00:00/40 tag 0 ncq 65536 out > res 40/00:04:43:b2:a1/00:00:0c:00:00/40 Emask 0x60 (host bus error) > ata4.00: status: { DRDY } > ata4: hard resetting link > ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) > ata4.00: configured for UDMA/133 > ata4: EH complete > (XEN) [VT-D]iommu.c:821: iommu_fault_status: Primary Pending Fault > (XEN) [VT-D]iommu.c:796: DMAR:[DMA Read] Request device [00:1f.2] fault addr bf578000, iommu reg = ffff82c3fff57000 > (XEN) DMAR:[fault reason 06h] PTE Read access is not set > (XEN) print_vtd_entries: iommu = ffff83013fff3e80 bdf = 0:1f.2 gmfn = bf578 > (XEN) root_entry = ffff83013ff36000 > (XEN) root_entry[0] = 13c6bb001 > (XEN) context = ffff83013c6bb000 > (XEN) context[fa] = 2_13fec4001 > (XEN) l4 = ffff83013fec4000 > (XEN) l4_index = 0 > (XEN) l4[0] = 13fec1003 > (XEN) l3 = ffff83013fec1000 > (XEN) l3_index = 2 > (XEN) l3[2] = 13ccbe003 > (XEN) l2 = ffff83013ccbe000 > (XEN) l2_index = 1fa > (XEN) l2[1fa] = 13cac3003 > (XEN) l1 = ffff83013cac3000 > (XEN) l1_index = 178 > (XEN) l1[178] = 0 > (XEN) l1[178] not present > ata4.00: exception Emask 0x60 SAct 0x3 SErr 0x800 action 0x6 frozen > ata4.00: irq_stat 0x20000000, host bus error > ata4: SError: { HostInt } > ata4.00: failed command: WRITE FPDMA QUEUED > ata4.00: cmd 61/80:00:43:b2:a1/00:00:0c:00:00/40 tag 0 ncq 65536 out > res 40/00:0c:43:b1:a1/00:00:0c:00:00/40 Emask 0x60 (host bus error) > ata4.00: status: { DRDY } > ata4.00: failed command: WRITE FPDMA QUEUED > ata4.00: cmd 61/80:08:43:b1:a1/00:00:0c:00:00/40 tag 1 ncq 65536 out > res 40/00:0c:43:b1:a1/00:00:0c:00:00/40 Emask 0x60 (host bus error) > ata4.00: status: { DRDY } > ata4: hard resetting link > ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) > ata4.00: configured for UDMA/133 > ata4: EH complete > (XEN) [VT-D]iommu.c:821: iommu_fault_status: Primary Pending Fault > (XEN) [VT-D]iommu.c:796: DMAR:[DMA Read] Request device [00:1f.2] fault addr bf578000, iommu reg = ffff82c3fff57000 > (XEN) DMAR:[fault reason 06h] PTE Read access is not set > (XEN) print_vtd_entries: iommu = ffff83013fff3e80 bdf = 0:1f.2 gmfn = bf578 > (XEN) root_entry = ffff83013ff36000 > (XEN) root_entry[0] = 13c6bb001 > (XEN) context = ffff83013c6bb000 > (XEN) context[fa] = 2_13fec4001 > (XEN) l4 = ffff83013fec4000 > (XEN) l4_index = 0 > (XEN) l4[0] = 13fec1003 > (XEN) l3 = ffff83013fec1000 > (XEN) l3_index = 2 > (XEN) l3[2] = 13ccbe003 > (XEN) l2 = ffff83013ccbe000 > (XEN) l2_index = 1fa > (XEN) l2[1fa] = 13cac3003 > (XEN) l1 = ffff83013cac3000 > (XEN) l1_index = 178 > (XEN) l1[178] = 0 > (XEN) l1[178] not present > ata4.00: exception Emask 0x60 SAct 0x3 SErr 0x800 action 0x6 frozen > ata4.00: irq_stat 0x20000000, host bus error > ata4: SError: { HostInt } > ata4.00: failed command: WRITE FPDMA QUEUED > ata4.00: cmd 61/80:00:43:b1:a1/00:00:0c:00:00/40 tag 0 ncq 65536 out > res 40/00:0c:43:b2:a1/00:00:0c:00:00/40 Emask 0x60 (host bus error) > ata4.00: status: { DRDY } > ata4.00: failed command: WRITE FPDMA QUEUED > ata4.00: cmd 61/80:08:43:b2:a1/00:00:0c:00:00/40 tag 1 ncq 65536 out > res 40/00:0c:43:b2:a1/00:00:0c:00:00/40 Emask 0x60 (host bus error) > ata4.00: status: { DRDY } > ata4: hard resetting link > ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) > ata4.00: configured for UDMA/133 > ata4: EH complete > (XEN) [VT-D]iommu.c:821: iommu_fault_status: Primary Pending Fault > (XEN) [VT-D]iommu.c:796: DMAR:[DMA Read] Request device [00:1f.2] fault addr bf578000, iommu reg = ffff82c3fff57000 > (XEN) DMAR:[fault reason 06h] PTE Read access is not set > (XEN) print_vtd_entries: iommu = ffff83013fff3e80 bdf = 0:1f.2 gmfn = bf578 > (XEN) root_entry = ffff83013ff36000 > (XEN) root_entry[0] = 13c6bb001 > (XEN) context = ffff83013c6bb000 > (XEN) context[fa] = 2_13fec4001 > (XEN) l4 = ffff83013fec4000 > (XEN) l4_index = 0 > (XEN) l4[0] = 13fec1003 > (XEN) l3 = ffff83013fec1000 > (XEN) l3_index = 2 > (XEN) l3[2] = 13ccbe003 > (XEN) l2 = ffff83013ccbe000 > (XEN) l2_index = 1fa > (XEN) l2[1fa] = 13cac3003 > (XEN) l1 = ffff83013cac3000 > (XEN) l1_index = 178 > (XEN) l1[178] = 0 > (XEN) l1[178] not present > ata4.00: exception Emask 0x60 SAct 0x3f SErr 0x800 action 0x6 frozen > ata4.00: irq_stat 0x20000000, host bus error > ata4: SError: { HostInt } > ata4.00: failed command: WRITE FPDMA QUEUED > ata4.00: cmd 61/80:00:43:b2:a1/00:00:0c:00:00/40 tag 0 ncq 65536 out > res 40/00:2c:43:39:a2/00:00:0c:00:00/40 Emask 0x60 (host bus error) > ata4.00: status: { DRDY } > ata4.00: failed command: WRITE FPDMA QUEUED > ata4.00: cmd 61/80:08:43:b1:a1/00:00:0c:00:00/40 tag 1 ncq 65536 out > res 40/00:2c:43:39:a2/00:00:0c:00:00/40 Emask 0x60 (host bus error) > ata4.00: status: { DRDY } > ata4.00: failed command: READ FPDMA QUEUED > ata4.00: cmd 60/00:10:43:2d:a2/04:00:0c:00:00/40 tag 2 ncq 524288 in > res 40/00:2c:43:39:a2/00:00:0c:00:00/40 Emask 0x60 (host bus error) > ata4.00: status: { DRDY } > ata4.00: failed command: READ FPDMA QUEUED > ata4.00: cmd 60/00:18:43:31:a2/04:00:0c:00:00/40 tag 3 ncq 524288 in > res 40/00:2c:43:39:a2/00:00:0c:00:00/40 Emask 0x60 (host bus error) > ata4.00: status: { DRDY } > ata4.00: failed command: READ FPDMA QUEUED > ata4.00: cmd 60/00:20:43:35:a2/04:00:0c:00:00/40 tag 4 ncq 524288 in > res 40/00:2c:43:39:a2/00:00:0c:00:00/40 Emask 0x60 (host bus error) > ata4.00: status: { DRDY } > ata4.00: failed command: READ FPDMA QUEUED > ata4.00: cmd 60/00:28:43:39:a2/04:00:0c:00:00/40 tag 5 ncq 524288 in > res 40/00:2c:43:39:a2/00:00:0c:00:00/40 Emask 0x60 (host bus error) > ata4.00: status: { DRDY } > ata4: hard resetting link > ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) > ata4.00: configured for UDMA/133 > ata4: EH complete > (XEN) [VT-D]iommu.c:821: iommu_fault_status: Primary Pending Fault > (XEN) [VT-D]iommu.c:796: DMAR:[DMA Read] Request device [00:1f.2] fault addr bf578000, iommu reg = ffff82c3fff57000 > (XEN) DMAR:[fault reason 06h] PTE Read access is not set > (XEN) print_vtd_entries: iommu = ffff83013fff3e80 bdf = 0:1f.2 gmfn = bf578 > (XEN) root_entry = ffff83013ff36000 > (XEN) root_entry[0] = 13c6bb001 > (XEN) context = ffff83013c6bb000 > (XEN) context[fa] = 2_13fec4001 > (XEN) l4 = ffff83013fec4000 > (XEN) l4_index = 0 > (XEN) l4[0] = 13fec1003 > (XEN) l3 = ffff83013fec1000 > (XEN) l3_index = 2 > (XEN) l3[2] = 13ccbe003 > (XEN) l2 = ffff83013ccbe000 > (XEN) l2_index = 1fa > (XEN) l2[1fa] = 13cac3003 > (XEN) l1 = ffff83013cac3000 > (XEN) l1_index = 178 > (XEN) l1[178] = 0 > (XEN) l1[178] not present > ata4.00: exception Emask 0x60 SAct 0x3f SErr 0x800 action 0x6 frozen > ata4.00: irq_stat 0x20000000, host bus error > ata4: SError: { HostInt } > ata4.00: failed command: READ FPDMA QUEUED > ata4.00: cmd 60/00:00:43:39:a2/04:00:0c:00:00/40 tag 0 ncq 524288 in > res 40/00:2c:43:b2:a1/00:00:0c:00:00/40 Emask 0x60 (host bus error) > ata4.00: status: { DRDY } > ata4.00: failed command: READ FPDMA QUEUED > ata4.00: cmd 60/00:08:43:35:a2/04:00:0c:00:00/40 tag 1 ncq 524288 in > res 40/00:2c:43:b2:a1/00:00:0c:00:00/40 Emask 0x60 (host bus error) > ata4.00: status: { DRDY } > ata4.00: failed command: READ FPDMA QUEUED > ata4.00: cmd 60/00:10:43:31:a2/04:00:0c:00:00/40 tag 2 ncq 524288 in > res 40/00:2c:43:b2:a1/00:00:0c:00:00/40 Emask 0x60 (host bus error) > ata4.00: status: { DRDY } > ata4.00: failed command: READ FPDMA QUEUED > ata4.00: cmd 60/00:18:43:2d:a2/04:00:0c:00:00/40 tag 3 ncq 524288 in > res 40/00:2c:43:b2:a1/00:00:0c:00:00/40 Emask 0x60 (host bus error) > ata4.00: status: { DRDY } > ata4.00: failed command: WRITE FPDMA QUEUED > ata4.00: cmd 61/80:20:43:b1:a1/00:00:0c:00:00/40 tag 4 ncq 65536 out > res 40/00:2c:43:b2:a1/00:00:0c:00:00/40 Emask 0x60 (host bus error) > ata4.00: status: { DRDY } > ata4.00: failed command: WRITE FPDMA QUEUED > ata4.00: cmd 61/80:28:43:b2:a1/00:00:0c:00:00/40 tag 5 ncq 65536 out > res 40/00:2c:43:b2:a1/00:00:0c:00:00/40 Emask 0x60 (host bus error) > ata4.00: status: { DRDY } > ata4: hard resetting link > ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) > ata4.00: configured for UDMA/133 > ata4: EH complete > (XEN) [VT-D]iommu.c:821: iommu_fault_status: Primary Pending Fault > (XEN) [VT-D]iommu.c:796: DMAR:[DMA Read] Request device [00:1f.2] fault addr bf578000, iommu reg = ffff82c3fff57000 > (XEN) DMAR:[fault reason 06h] PTE Read access is not set > (XEN) print_vtd_entries: iommu = ffff83013fff3e80 bdf = 0:1f.2 gmfn = bf578 > (XEN) root_entry = ffff83013ff36000 > (XEN) root_entry[0] = 13c6bb001 > (XEN) context = ffff83013c6bb000 > (XEN) context[fa] = 2_13fec4001 > (XEN) l4 = ffff83013fec4000 > (XEN) l4_index = 0 > (XEN) l4[0] = 13fec1003 > (XEN) l3 = ffff83013fec1000 > (XEN) l3_index = 2 > (XEN) l3[2] = 13ccbe003 > (XEN) l2 = ffff83013ccbe000 > (XEN) l2_index = 1fa > (XEN) l2[1fa] = 13cac3003 > (XEN) l1 = ffff83013cac3000 > (XEN) l1_index = 178 > (XEN) l1[178] = 0 > (XEN) l1[178] not present > ata4.00: exception Emask 0x60 SAct 0x3f SErr 0x800 action 0x6 frozen > ata4.00: irq_stat 0x20000000, host bus error > ata4: SError: { HostInt } > ata4.00: failed command: WRITE FPDMA QUEUED > ata4.00: cmd 61/80:00:43:b2:a1/00:00:0c:00:00/40 tag 0 ncq 65536 out > res 40/00:2c:43:39:a2/00:00:0c:00:00/40 Emask 0x60 (host bus error) > ata4.00: status: { DRDY } > ata4.00: failed command: WRITE FPDMA QUEUED > ata4.00: cmd 61/80:08:43:b1:a1/00:00:0c:00:00/40 tag 1 ncq 65536 out > res 40/00:2c:43:39:a2/00:00:0c:00:00/40 Emask 0x60 (host bus error) > ata4.00: status: { DRDY } > ata4.00: failed command: READ FPDMA QUEUED > ata4.00: cmd 60/00:10:43:2d:a2/04:00:0c:00:00/40 tag 2 ncq 524288 in > res 40/00:2c:43:39:a2/00:00:0c:00:00/40 Emask 0x60 (host bus error) > ata4.00: status: { DRDY } > ata4.00: failed command: READ FPDMA QUEUED > ata4.00: cmd 60/00:18:43:31:a2/04:00:0c:00:00/40 tag 3 ncq 524288 in > res 40/00:2c:43:39:a2/00:00:0c:00:00/40 Emask 0x60 (host bus error) > ata4.00: status: { DRDY } > ata4.00: failed command: READ FPDMA QUEUED > ata4.00: cmd 60/00:20:43:35:a2/04:00:0c:00:00/40 tag 4 ncq 524288 in > res 40/00:2c:43:39:a2/00:00:0c:00:00/40 Emask 0x60 (host bus error) > ata4.00: status: { DRDY } > ata4.00: failed command: READ FPDMA QUEUED > ata4.00: cmd 60/00:28:43:39:a2/04:00:0c:00:00/40 tag 5 ncq 524288 in > res 40/00:2c:43:39:a2/00:00:0c:00:00/40 Emask 0x60 (host bus error) > ata4.00: status: { DRDY } > ata4: hard resetting link > ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) > ata4.00: configured for UDMA/133 > sd 3:0:0:0: [sdd] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE > sd 3:0:0:0: [sdd] Sense Key : Aborted Command [current] [descriptor] > Descriptor sense data with sense descriptors (in hex): > 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 > 0c a2 39 43 > sd 3:0:0:0: [sdd] Add. Sense: No additional sense information > sd 3:0:0:0: [sdd] CDB: Write(10): 2a 00 0c a1 b2 43 00 00 80 00 > end_request: I/O error, dev sdd, sector 211923523 > raid10: Disk failure on sdd3, disabling device. > raid10: Operation continuing on 2 devices. > ata4: EH complete > md: md0: resync done. > (XEN) [VT-D]iommu.c:821: iommu_fault_status: Primary Pending Fault > (XEN) [VT-D]iommu.c:796: DMAR:[DMA Read] Request device [00:1f.2] fault addr bf578000, iommu reg = ffff82c3fff57000 > (XEN) DMAR:[fault reason 06h] PTE Read access is not set > (XEN) print_vtd_entries: iommu = ffff83013fff3e80 bdf = 0:1f.2 gmfn = bf578 > (XEN) root_entry = ffff83013ff36000 > (XEN) root_entry[0] = 13c6bb001 > (XEN) context = ffff83013c6bb000 > (XEN) context[fa] = 2_13fec4001 > (XEN) l4 = ffff83013fec4000 > (XEN) l4_index = 0 > (XEN) l4[0] = 13fec1003 > (XEN) l3 = ffff83013fec1000 > (XEN) l3_index = 2 > (XEN) l3[2] = 13ccbe003 > (XEN) l2 = ffff83013ccbe000 > (XEN) l2_index = 1fa > (XEN) l2[1fa] = 13cac3003 > (XEN) l1 = ffff83013cac3000 > (XEN) l1_index = 178 > (XEN) l1[178] = 0 > (XEN) l1[178] not present > ata4.00: exception Emask 0x60 SAct 0x1f SErr 0x800 action 0x6 frozen > ata4.00: irq_stat 0x20000000, host bus error > ata4: SError: { HostInt } > ata4.00: failed command: READ FPDMA QUEUED > ata4.00: cmd 60/00:00:43:39:a2/04:00:0c:00:00/40 tag 0 ncq 524288 in > res 40/00:24:43:b1:a1/00:00:0c:00:00/40 Emask 0x60 (host bus error) > ata4.00: status: { DRDY } > ata4.00: failed command: READ FPDMA QUEUED > ata4.00: cmd 60/00:08:43:35:a2/04:00:0c:00:00/40 tag 1 ncq 524288 in > res 40/00:24:43:b1:a1/00:00:0c:00:00/40 Emask 0x60 (host bus error) > ata4.00: status: { DRDY } > ata4.00: failed command: READ FPDMA QUEUED > ata4.00: cmd 60/00:10:43:31:a2/04:00:0c:00:00/40 tag 2 ncq 524288 in > res 40/00:24:43:b1:a1/00:00:0c:00:00/40 Emask 0x60 (host bus error) > ata4.00: status: { DRDY } > ata4.00: failed command: READ FPDMA QUEUED > ata4.00: cmd 60/00:18:43:2d:a2/04:00:0c:00:00/40 tag 3 ncq 524288 in > res 40/00:24:43:b1:a1/00:00:0c:00:00/40 Emask 0x60 (host bus error) > ata4.00: status: { DRDY } > ata4.00: failed command: WRITE FPDMA QUEUED > ata4.00: cmd 61/80:20:43:b1:a1/00:00:0c:00:00/40 tag 4 ncq 65536 out > res 40/00:24:43:b1:a1/00:00:0c:00:00/40 Emask 0x60 (host bus error) > ata4.00: status: { DRDY } > ata4: hard resetting link > ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) > ata4.00: configured for UDMA/133 > sd 3:0:0:0: [sdd] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE > sd 3:0:0:0: [sdd] Sense Key : Aborted Command [current] [descriptor] > Descriptor sense data with sense descriptors (in hex): > 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 > 0c a1 b1 43 > sd 3:0:0:0: [sdd] Add. Sense: No additional sense information > sd 3:0:0:0: [sdd] CDB: Write(10): 2a 00 0c a1 b1 43 00 00 80 00 > end_request: I/O error, dev sdd, sector 211923267 > ata4: EH complete > md: checkpointing resync of md0. > RAID10 conf printout: > --- wd:2 rd:4 > disk 0, wo:0, o:1, dev:sda3 > disk 2, wo:0, o:1, dev:sdc3 > disk 3, wo:1, o:0, dev:sdd3 > RAID10 conf printout: > --- wd:2 rd:4 > disk 0, wo:0, o:1, dev:sda3 > disk 2, wo:0, o:1, dev:sdc3 > md: resync of RAID array md0 > md: minimum _guaranteed_ speed: 1000 KB/sec/disk. > md: using maximum available idle IO bandwidth (but not more than 200000 KB/sec) for resync. > md: using 128k window, over a total of 819199872 blocks. > md: resuming resync of md0 from checkpoint. > md: md0: resync done. > RAID10 conf printout: > --- wd:2 rd:4 > disk 0, wo:0, o:1, dev:sda3 > disk 2, wo:0, o:1, dev:sdc3 > > > > > ========================================================================= > > > __ __ _ _ _ _ _ _ > \ \/ /___ _ __ | || | / | _ _ _ __ ___| |_ __ _| |__ | | ___ > \ // _ \ '_ \ | || |_ | |__| | | | '_ \/ __| __/ _` | '_ \| |/ _ \ > / \ __/ | | | |__ _|| |__| |_| | | | \__ \ || (_| | |_) | | __/ > /_/\_\___|_| |_| |_|(_)_| \__,_|_| |_|___/\__\__,_|_.__/|_|\___| > > (XEN) Xen version 4.1-unstable (jeremy@) (gcc version 4.4.3 20100127 (Red Hat 4.4.3-4) (GCC) ) Tue Apr 6 17:23:29 PDT 2010 > (XEN) Latest ChangeSet: Tue Apr 06 17:23:12 2010 -0700 21115:ea6c67dc4577 > (XEN) Command line: com2=115200,8n1,0x3e8,5 console=com2,vga cpufreq=xen iommu=verbose > (XEN) Video information: > (XEN) VGA is text mode 80x25, font 8x16 > (XEN) VBE/DDC methods: none; EDID transfer time: 0 seconds > (XEN) EDID info not retrieved because no DDC retrieval method detected > (XEN) Disc information: > (XEN) Found 4 MBR signatures > (XEN) Found 4 EDD information structures > (XEN) Xen-e820 RAM map: > (XEN) 0000000000000000 - 000000000009d800 (usable) > (XEN) 000000000009d800 - 00000000000a0000 (reserved) > (XEN) 00000000000e0000 - 0000000000100000 (reserved) > (XEN) 0000000000100000 - 00000000bf790000 (usable) > (XEN) 00000000bf79e000 - 00000000bf7a0000 type 9 > (XEN) 00000000bf7a0000 - 00000000bf7ae000 (ACPI data) > (XEN) 00000000bf7ae000 - 00000000bf7d0000 (ACPI NVS) > (XEN) 00000000bf7d0000 - 00000000bf7e0000 (reserved) > (XEN) 00000000bf7ed000 - 00000000c0000000 (reserved) > (XEN) 00000000e0000000 - 00000000f0000000 (reserved) > (XEN) 00000000fed20000 - 00000000fed40000 (reserved) > (XEN) 00000000fee00000 - 00000000fee01000 (reserved) > (XEN) 0000000100000000 - 0000000140000000 (usable) > (XEN) ACPI: RSDP 000FA110, 0024 (r2 ACPIAM) > (XEN) ACPI: XSDT BF7A0100, 0084 (r1 SMCI 20100225 MSFT 97) > (XEN) ACPI: FACP BF7A0290, 00F4 (r4 022510 FACP1918 20100225 MSFT 97) > (XEN) ACPI: DSDT BF7A05F0, 6C55 (r2 10605 10605000 0 INTL 20051117) > (XEN) ACPI: FACS BF7AE000, 0040 > (XEN) ACPI: APIC BF7A0390, 0092 (r2 022510 APIC1918 20100225 MSFT 97) > (XEN) ACPI: MCFG BF7A0430, 003C (r1 022510 OEMMCFG 20100225 MSFT 97) > (XEN) ACPI: OEMB BF7AE040, 0073 (r1 022510 OEMB1918 20100225 MSFT 97) > (XEN) ACPI: HPET BF7AA5F0, 0038 (r1 022510 OEMHPET 20100225 MSFT 97) > (XEN) ACPI: GSCI BF7AE0C0, 2024 (r1 022510 GMCHSCI 20100225 MSFT 97) > (XEN) ACPI: DMAR BF7B00F0, 0090 (r1 AMI OEMDMAR 1 MSFT 97) > (XEN) ACPI: SSDT BF7B1580, 0363 (r1 DpgPmm CpuPm 12 INTL 20051117) > (XEN) ACPI: EINJ BF7AA630, 0130 (r1 AMIER AMI_EINJ 20100225 MSFT 97) > (XEN) ACPI: BERT BF7AA7C0, 0030 (r1 AMIER AMI_BERT 20100225 MSFT 97) > (XEN) ACPI: ERST BF7AA7F0, 01B0 (r1 AMIER AMI_ERST 20100225 MSFT 97) > (XEN) ACPI: HEST BF7AA9A0, 00A8 (r1 AMIER ABC_HEST 20100225 MSFT 97) > (XEN) System RAM: 4056MB (4153584kB) > (XEN) No NUMA configuration found > (XEN) Faking a node at 0000000000000000-0000000140000000 > (XEN) Domain heap initialised > (XEN) found SMP MP-table at 000ff780 > (XEN) DMI present. > (XEN) Using APIC driver default > (XEN) ACPI: PM-Timer IO Port: 0x808 > (XEN) ACPI: ACPI SLEEP INFO: pm1x_cnt[804,0], pm1x_evt[800,0] > (XEN) ACPI: wakeup_vec[bf7ae00c], vec_size[20] > (XEN) ACPI: Local APIC address 0xfee00000 > (XEN) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) > (XEN) Processor #0 7:14 APIC version 21 > (XEN) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) > (XEN) Processor #2 7:14 APIC version 21 > (XEN) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled) > (XEN) Processor #4 7:14 APIC version 21 > (XEN) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled) > (XEN) Processor #6 7:14 APIC version 21 > (XEN) ACPI: LAPIC (acpi_id[0x05] lapic_id[0x84] disabled) > (XEN) ACPI: LAPIC (acpi_id[0x06] lapic_id[0x85] disabled) > (XEN) ACPI: LAPIC (acpi_id[0x07] lapic_id[0x86] disabled) > (XEN) ACPI: LAPIC (acpi_id[0x08] lapic_id[0x87] disabled) > (XEN) ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) > (XEN) ACPI: IOAPIC (id[0x07] address[0xfec00000] gsi_base[0]) > (XEN) IOAPIC[0]: apic_id 7, version 32, address 0xfec00000, GSI 0-23 > (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) > (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) > (XEN) ACPI: IRQ0 used by override. > (XEN) ACPI: IRQ2 used by override. > (XEN) ACPI: IRQ9 used by override. > (XEN) Enabling APIC mode: Flat. Using 1 I/O APICs > (XEN) ACPI: HPET id: 0x8086a701 base: 0xfed00000 > (XEN) [VT-D]dmar.c:679: Host address width 36 > (XEN) [VT-D]dmar.c:694: found ACPI_DMAR_DRHD: > (XEN) [VT-D]dmar.c:398: dmaru->address = fed90000 > (XEN) [VT-D]dmar.c:411: flags: INCLUDE_ALL > (XEN) [VT-D]dmar.c:699: found ACPI_DMAR_RMRR: > (XEN) [VT-D]dmar.c:334: endpoint: 0:1d.0 > (XEN) [VT-D]dmar.c:334: endpoint: 0:1a.0 > (XEN) [VT-D]dmar.c:571: RMRR region: base_addr ed000 end_address effff > (XEN) [VT-D]dmar.c:699: found ACPI_DMAR_RMRR: > (XEN) [VT-D]dmar.c:334: endpoint: 0:1d.0 > (XEN) [VT-D]dmar.c:334: endpoint: 0:1a.0 > (XEN) [VT-D]dmar.c:571: RMRR region: base_addr bf7ed000 end_address bf7fffff > (XEN) PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 > (XEN) PCI: MCFG area at e0000000 reserved in E820 > (XEN) Using ACPI (MADT) for SMP configuration information > (XEN) Using scheduler: SMP Credit Scheduler (credit) > (XEN) Detected 2400.063 MHz processor. > (XEN) Initing memory sharing. > (XEN) EPT support 2M super page. > (XEN) VMX: Supported advanced features: > (XEN) - APIC MMIO access virtualisation > (XEN) - APIC TPR shadow > (XEN) - Extended Page Tables (EPT) > (XEN) - Virtual-Processor Identifiers (VPID) > (XEN) - Virtual NMI > (XEN) - MSR direct-access bitmap > (XEN) HVM: ASIDs enabled. > (XEN) HVM: VMX enabled > (XEN) HVM: Hardware Assisted Paging detected. > (XEN) Intel machine check reporting enabled > (XEN) [VT-D]iommu.c:1078: drhd->address = fed90000 iommu->reg = ffff82c3fff57000 > (XEN) [VT-D]iommu.c:1080: cap = c90780106f0462 ecap = f020e3 > (XEN) Intel VT-d Snoop Control supported. > (XEN) Intel VT-d DMA Passthrough not supported. > (XEN) Intel VT-d Queued Invalidation supported. > (XEN) Intel VT-d Interrupt Remapping not supported. > (XEN) I/O virtualisation enabled > (XEN) I/O virtualisation for PV guests disabled > (XEN) EPT support 2M super page. > (XEN) EPT support 2M super page. > (XEN) EPT support 2M super page. > (XEN) Total of 4 processors activated. > (XEN) ENABLING IO-APIC IRQs > (XEN) -> Using new ACK method > (XEN) ..TIMER: vector=0xF0 apic1=0 pin1=2 apic2=-1 pin2=-1 > (XEN) TSC is reliable, synchronization unnecessary > (XEN) Platform timer is 14.318MHz HPET > �(XEN) Allocated console ring of 32 KiB. > (XEN) microcode.c:73:d32767 microcode: CPU1 resumed > (XEN) microcode.c:73:d32767 microcode: CPU2 resumed > (XEN) Brought up 4 CPUs > (XEN) microcode.c:73:d32767 microcode: CPU3 resumed > (XEN) Turbo Mode detected! > (XEN) HPET: 8 timers in total, 8 timers will be used for broadcast > (XEN) ACPI sleep modes: S3 > (XEN) mcheck_poll: Machine check polling timer started. > (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 0:0.0 > (XEN) [VT-D]iommu.c:1325: d0:PCIe: map bdf = 0:8.0 > (XEN) [VT-D]iommu.c:1325: d0:PCIe: map bdf = 0:8.1 > (XEN) [VT-D]iommu.c:1325: d0:PCIe: map bdf = 0:8.2 > (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 0:8.3 > (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 0:10.0 > (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 0:10.1 > (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 0:1a.0 > (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 0:1d.0 > (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 0:1f.0 > (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 0:1f.2 > (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 0:1f.3 > (XEN) [VT-D]iommu.c:1325: d0:PCIe: map bdf = 3:0.0 > (XEN) [VT-D]iommu.c:1325: d0:PCIe: map bdf = 4:0.0 > (XEN) [VT-D]iommu.c:1325: d0:PCIe: map bdf = 5:0.0 > (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 6:3.0 > (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 6:3.1 > (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 6:3.2 > (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 6:3.3 > (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 6:3.4 > (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 6:3.5 > (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 6:3.6 > (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 6:3.7 > (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = ff:0.0 > (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = ff:0.1 > (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = ff:2.0 > (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = ff:2.1 > (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = ff:3.0 > (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = ff:3.1 > (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = ff:3.2 > (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = ff:3.4 > (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = ff:4.0 > (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = ff:4.1 > (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = ff:4.2 > (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = ff:4.3 > (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = ff:5.0 > (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = ff:5.1 > (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = ff:5.2 > (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = ff:5.3 > (XEN) [VT-D]iommu.c:695: iommu_enable_translation: iommu->reg = ffff82c3fff57000 > (XEN) *** LOADING DOMAIN 0 *** > (XEN) elf_parse_binary: phdr: paddr=0x1000000 memsz=0x69c000 > (XEN) elf_parse_binary: phdr: paddr=0x169c000 memsz=0xe3cb0 > (XEN) elf_parse_binary: phdr: paddr=0x1780000 memsz=0x888 > (XEN) elf_parse_binary: phdr: paddr=0x1781000 memsz=0x14498 > (XEN) elf_parse_binary: phdr: paddr=0x1796000 memsz=0x9f5000 > (XEN) elf_parse_binary: memory: 0x1000000 -> 0x218b000 > (XEN) elf_xen_parse_note: GUEST_OS = "linux" > (XEN) elf_xen_parse_note: GUEST_VERSION = "2.6" > (XEN) elf_xen_parse_note: XEN_VERSION = "xen-3.0" > (XEN) elf_xen_parse_note: VIRT_BASE = 0xffffffff80000000 > (XEN) elf_xen_parse_note: ENTRY = 0xffffffff81796200 > (XEN) elf_xen_parse_note: HYPERCALL_PAGE = 0xffffffff81009000 > (XEN) elf_xen_parse_note: FEATURES = "!writable_page_tables|pae_pgdir_above_4gb" > (XEN) elf_xen_parse_note: PAE_MODE = "yes" > (XEN) elf_xen_parse_note: LOADER = "generic" > (XEN) elf_xen_parse_note: unknown xen elf note (0xd) > (XEN) elf_xen_parse_note: SUSPEND_CANCEL = 0x1 > (XEN) elf_xen_parse_note: HV_START_LOW = 0xffff800000000000 > (XEN) elf_xen_parse_note: PADDR_OFFSET = 0x0 > (XEN) elf_xen_addr_calc_check: addresses: > (XEN) virt_base = 0xffffffff80000000 > (XEN) elf_paddr_offset = 0x0 > (XEN) virt_offset = 0xffffffff80000000 > (XEN) virt_kstart = 0xffffffff81000000 > (XEN) virt_kend = 0xffffffff8218b000 > (XEN) virt_entry = 0xffffffff81796200 > (XEN) p2m_base = 0xffffffffffffffff > (XEN) Xen kernel: 64-bit, lsb, compat32 > (XEN) Dom0 kernel: 64-bit, PAE, lsb, paddr 0x1000000 -> 0x218b000 > (XEN) PHYSICAL MEMORY ARRANGEMENT: > (XEN) Dom0 alloc.: 0000000138000000->000000013c000000 (981633 pages to be allocated) > (XEN) VIRTUAL MEMORY ARRANGEMENT: > (XEN) Loaded kernel: ffffffff81000000->ffffffff8218b000 > (XEN) Init. ramdisk: ffffffff8218b000->ffffffff82b69800 > (XEN) Phys-Mach map: ffffffff82b6a000->ffffffff83307408 > (XEN) Start info: ffffffff83308000->ffffffff833084b4 > (XEN) Page tables: ffffffff83309000->ffffffff83326000 > (XEN) Boot stack: ffffffff83326000->ffffffff83327000 > (XEN) TOTAL: ffffffff80000000->ffffffff83400000 > (XEN) ENTRY ADDRESS: ffffffff81796200 > (XEN) Dom0 has maximum 4 VCPUs > (XEN) elf_load_binary: phdr 0 at 0xffffffff81000000 -> 0xffffffff8169c000 > (XEN) elf_load_binary: phdr 1 at 0xffffffff8169c000 -> 0xffffffff8177fcb0 > (XEN) elf_load_binary: phdr 2 at 0xffffffff81780000 -> 0xffffffff81780888 > (XEN) elf_load_binary: phdr 3 at 0xffffffff81781000 -> 0xffffffff81795498 > (XEN) elf_load_binary: phdr 4 at 0xffffffff81796000 -> 0xffffffff81830000 > (XEN) Scrubbing Free RAM: .done. > (XEN) Xen trace buffers: disabled > (XEN) Std. Loglevel: All > (XEN) Guest Loglevel: All > (XEN) Xen is relinquishing VGA console. > (XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch input to Xen) > (XEN) Freed 164kB init memory. > mapping kernel into physical memory > Xen: setup ISA identity maps > about to get started... > Initializing cgroup subsys cpuset > Initializing cgroup subsys cpu > Linux version 2.6.32.11 (jeremy@lilith.goop.org) (gcc version 4.4.3 20100127 (Red Hat 4.4.3-4) (GCC) ) #7 SMP PREEMPT Mon Apr 5 14:58:54 PDT 2010 > Command line: ro root=/dev/mapper/vg_lilith--raid-root LANG=en_US.UTF-8 SYSFONT=latarcyrheb-sun16 KEYBOARDTYPE=pc KEYTABLE=us ignore_loglevel earlyprintk=xen console=hvc0 rdshell pcie_aspm=off > KERNEL supported cpus: > Intel GenuineIntel > AMD AuthenticAMD > Centaur CentaurHauls > xen_release_chunk: looking at area pfn bf790-bf79e: 14 pages freed > xen_release_chunk: looking at area pfn bf7e0-bf7ed: 13 pages freed > xen_release_chunk: looking at area pfn c0000-e0000: 131072 pages freed > xen_release_chunk: looking at area pfn f0000-fec00: 14977 pages freed > xen_release_chunk: looking at area pfn fec01-fed20: 0 pages freed > xen_release_chunk: looking at area pfn fed40-fee00: 0 pages freed > released 146076 pages of unused memory > BIOS-provided physical RAM map: > Xen: 0000000000000000 - 000000000009d800 (usable) > Xen: 000000000009d800 - 0000000000100000 (reserved) > Xen: 0000000000100000 - 00000000bf790000 (usable) > Xen: 00000000bf79e000 - 00000000bf7a0000 type 9 > Xen: 00000000bf7a0000 - 00000000bf7ae000 (ACPI data) > Xen: 00000000bf7ae000 - 00000000bf7d0000 (ACPI NVS) > Xen: 00000000bf7d0000 - 00000000bf7e0000 (reserved) > Xen: 00000000bf7ed000 - 00000000c0000000 (reserved) > Xen: 00000000e0000000 - 00000000f0000000 (reserved) > Xen: 00000000fec00000 - 00000000fec01000 (reserved) > Xen: 00000000fed20000 - 00000000fed40000 (reserved) > Xen: 00000000fee00000 - 00000000fee01000 (reserved) > debug: ignoring loglevel setting. > bootconsole [xenboot0] enabled > DMI present. > last_pfn = 0xbf790 max_arch_pfn = 0x400000000 > x86 PAT enabled: cpu 0, old 0x50100070406, new 0x7010600070106 > initial memory mapped : 0 - 20000000 > init_memory_mapping: 0000000000000000-00000000bf790000 > 0000000000 - 00bf790000 page 4k > kernel direct mapping tables up to bf790000 @ 100000-700000 > RAMDISK: 0218b000 - 02b69800 > ACPI: RSDP 00000000000fa110 00024 (v02 ACPIAM) > ACPI: XSDT 00000000bf7a0100 00084 (v01 SMCI 20100225 MSFT 00000097) > ACPI: FACP 00000000bf7a0290 000F4 (v04 022510 FACP1918 20100225 MSFT 00000097) > ACPI: DSDT 00000000bf7a05f0 06C55 (v02 10605 10605000 00000000 INTL 20051117) > ACPI: FACS 00000000bf7ae000 00040 > ACPI: APIC 00000000bf7a0390 00092 (v02 022510 APIC1918 20100225 MSFT 00000097) > ACPI: MCFG 00000000bf7a0430 0003C (v01 022510 OEMMCFG 20100225 MSFT 00000097) > ACPI: OEMB 00000000bf7ae040 00073 (v01 022510 OEMB1918 20100225 MSFT 00000097) > ACPI: HPET 00000000bf7aa5f0 00038 (v01 022510 OEMHPET 20100225 MSFT 00000097) > ACPI: GSCI 00000000bf7ae0c0 02024 (v01 022510 GMCHSCI 20100225 MSFT 00000097) > ACPI: 00000000bf7b00f0 00090 (v01 AMI OEMDMAR 00000001 MSFT 00000097) > ACPI: SSDT 00000000bf7b1580 00363 (v01 DpgPmm CpuPm 00000012 INTL 20051117) > ACPI: EINJ 00000000bf7aa630 00130 (v01 AMIER AMI_EINJ 20100225 MSFT 00000097) > ACPI: BERT 00000000bf7aa7c0 00030 (v01 AMIER AMI_BERT 20100225 MSFT 00000097) > ACPI: ERST 00000000bf7aa7f0 001B0 (v01 AMIER AMI_ERST 20100225 MSFT 00000097) > ACPI: HEST 00000000bf7aa9a0 000A8 (v01 AMIER ABC_HEST 20100225 MSFT 00000097) > ACPI: Local APIC address 0xfee00000 > No NUMA configuration found > Faking a node at 0000000000000000-00000000bf790000 > Bootmem setup node 0 0000000000000000-00000000bf790000 > NODE_DATA [0000000000001000 - 0000000000005fff] > bootmap [0000000000008000 - 000000000001fef7] pages 18 > (8 early reservations) ==> bootmem [0000000000 - 00bf790000] > #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] > #1 [0003309000 - 0003326000] XEN PAGETABLES ==> [0003309000 - 0003326000] > #2 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] > #3 [0001000000 - 000216a048] TEXT DATA BSS ==> [0001000000 - 000216a048] > #4 [000218b000 - 0002b69800] RAMDISK ==> [000218b000 - 0002b69800] > #5 [0002b6a000 - 0003309000] XEN START INFO ==> [0002b6a000 - 0003309000] > #6 [000216b000 - 000216b21b] BRK ==> [000216b000 - 000216b21b] > #7 [0000100000 - 00006e0000] PGTABLE ==> [0000100000 - 00006e0000] > found SMP MP-table at [ffff8800000ff780] ff780 > Zone PFN ranges: > DMA 0x00000000 -> 0x00001000 > DMA32 0x00001000 -> 0x00100000 > Normal 0x00100000 -> 0x00100000 > Movable zone start PFN for each node > early_node_map[2] active PFN ranges > 0: 0x00000000 -> 0x0000009d > 0: 0x00000100 -> 0x000bf790 > On node 0 totalpages: 784173 > DMA zone: 88 pages used for memmap > DMA zone: 1507 pages reserved > DMA zone: 2402 pages, LIFO batch:0 > DMA32 zone: 16762 pages used for memmap > DMA32 zone: 763414 pages, LIFO batch:31 > ACPI: PM-Timer IO Port: 0x808 > ACPI: Local APIC address 0xfee00000 > ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) > ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) > ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled) > ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled) > ACPI: LAPIC (acpi_id[0x05] lapic_id[0x84] disabled) > ACPI: LAPIC (acpi_id[0x06] lapic_id[0x85] disabled) > ACPI: LAPIC (acpi_id[0x07] lapic_id[0x86] disabled) > ACPI: LAPIC (acpi_id[0x08] lapic_id[0x87] disabled) > ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) > ACPI: IOAPIC (id[0x07] address[0xfec00000] gsi_base[0]) > IOAPIC[0]: apic_id 7, version 0, address 0xfec00000, GSI 0-0 > ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) > ERROR: Unable to locate IOAPIC for GSI 2 > ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) > ERROR: Unable to locate IOAPIC for GSI 9 > Using ACPI (MADT) for SMP configuration information > ACPI: HPET id: 0x8086a701 base: 0xfed00000 > SMP: Allowing 4 CPUs, 0 hotplug CPUs > nr_irqs_gsi: 256 > PM: Registered nosave memory: 000000000009d000 - 000000000009e000 > PM: Registered nosave memory: 000000000009e000 - 0000000000100000 > Allocating PCI resources starting at c0000000 (gap: c0000000:20000000) > Booting paravirtualized kernel on Xen > Xen version: 4.1-unstable (preserve-AD) (dom0) > NR_CPUS:16 nr_cpumask_bits:16 nr_cpu_ids:4 nr_node_ids:1 > PERCPU: Embedded 28 pages/cpu @ffff88000336d000 s83096 r8192 d23400 u114688 > pcpu-alloc: s83096 r8192 d23400 u114688 alloc=28*4096 > pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 > trying to map vcpu_info 0 at ffff880003378020, mfn 13b378, offset 32 > cpu 0 using vcpu_info at ffff880003378020 > trying to map vcpu_info 1 at ffff880003394020, mfn 13b394, offset 32 > cpu 1 using vcpu_info at ffff880003394020 > trying to map vcpu_info 2 at ffff8800033b0020, mfn 13b3b0, offset 32 > cpu 2 using vcpu_info at ffff8800033b0020 > trying to map vcpu_info 3 at ffff8800033cc020, mfn 13b3cc, offset 32 > cpu 3 using vcpu_info at ffff8800033cc020 > Xen: using vcpu_info placement > Built 1 zonelists in Node order, mobility grouping on. Total pages: 765816 > Policy zone: DMA32 > Kernel command line: ro root=/dev/mapper/vg_lilith--raid-root LANG=en_US.UTF-8 SYSFONT=latarcyrheb-sun16 KEYBOARDTYPE=pc KEYTABLE=us ignore_loglevel earlyprintk=xen console=hvc0 rdshell pcie_aspm=off > PCIe ASPM is disabled > PID hash table entries: 4096 (order: 3, 32768 bytes) > Initializing CPU#0 > DMA: Placing 64MB software IO TLB between ffff88000794a000 - ffff88000b94a000 > DMA: software IO TLB at phys 0x794a000 - 0xb94a000 > xen_swiotlb_fixup: buf=ffff88000794a000 size=67108864 > xen_swiotlb_fixup: buf=ffff88000b9aa000 size=32768 > Memory: 2960308k/3137088k available (4691k kernel code, 396k absent, 176384k reserved, 2987k data, 656k init) > Hierarchical RCU implementation. > NR_IRQS:4352 nr_irqs:1280 > xen: --> irq=0 > xen: --> irq=1 > xen: --> irq=2 > xen: --> irq=3 > xen: --> irq=4 > xen: --> irq=5 > xen: --> irq=6 > xen: --> irq=7 > xen: --> irq=8 > xen: --> irq=9 > xen: --> irq=10 > xen: --> irq=11 > xen: --> irq=12 > xen: --> irq=13 > xen: --> irq=14 > xen: --> irq=15 > ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) > ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) > xen: sci override: source_irq=9 global_irq=9 trigger=c polarity=1 > xen: registering gsi 9 triggering 0 polarity 0 > xen_allocate_pirq: returning irq 9 for gsi 9 > xen: --> irq=9 > xen: acpi sci 9 > Console: colour VGA+ 80x25 > console [hvc0] enabled, bootconsole disabled > console [hvc0] enabled, bootconsole disabled > Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar > ... MAX_LOCKDEP_SUBCLASSES: 8 > ... MAX_LOCK_DEPTH: 48 > ... MAX_LOCKDEP_KEYS: 8191 > ... CLASSHASH_SIZE: 4096 > ... MAX_LOCKDEP_ENTRIES: 16384 > ... MAX_LOCKDEP_CHAINS: 32768 > ... CHAINHASH_SIZE: 16384 > memory used by lock dependency info: 5855 kB > per task-struct memory footprint: 1920 bytes > Xen: using vcpuop timer interface > installing Xen timer for CPU 0 > alloc irq_desc for 1279 on node 0 > alloc kstat_irqs on node 0 > Detected 2400.062 MHz processor. > Calibrating delay loop (skipped), value calculated using timer frequency.. 4800.12 BogoMIPS (lpj=2400062) > Security Framework initialized > SELinux: Initializing. > SELinux: Starting in permissive mode > Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) > Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) > Mount-cache hash table entries: 256 > Initializing cgroup subsys ns > Initializing cgroup subsys cpuacct > CPU: L1 I cache: 32K, L1 D cache: 32K > CPU: L2 cache: 256K > CPU: L3 cache: 8192K > CPU 0/0x0 -> Node 0 > CPU: Unsupported number of siblings 16 > Performance Events: unsupported p6 CPU model 30 no PMU driver, software events only. > lockdep: fixing up alternatives. > SMP alternatives: switching to UP code > ACPI: Core revision 20090903 > alloc irq_desc for 1278 on node 0 > alloc kstat_irqs on node 0 > cpu 0 spinlock event irq 1278 > alloc irq_desc for 1277 on node 0 > alloc kstat_irqs on node 0 > alloc irq_desc for 1276 on node 0 > alloc kstat_irqs on node 0 > alloc irq_desc for 1275 on node 0 > alloc kstat_irqs on node 0 > alloc irq_desc for 1274 on node 0 > alloc kstat_irqs on node 0 > installing Xen timer for CPU 1 > alloc irq_desc for 1273 on node 0 > alloc kstat_irqs on node 0 > alloc irq_desc for 1272 on node 0 > alloc kstat_irqs on node 0 > cpu 1 spinlock event irq 1272 > lockdep: fixing up alternatives. > SMP alternatives: switching to SMP code > alloc irq_desc for 1271 on node 0 > alloc kstat_irqs on node 0 > alloc irq_desc for 1270 on node 0 > alloc kstat_irqs on node 0 > alloc irq_desc for 1269 on node 0 > alloc kstat_irqs on node 0 > alloc irq_desc for 1268 on node 0 > alloc kstat_irqs on node 0 > Initializing CPU#1 > CPU: L1 I cache: 32K, L1 D cache: 32K > CPU: L2 cache: 256K > CPU: L3 cache: 8192K > CPU 1/0x0 -> Node 0 > CPU: Unsupported number of siblings 16 > installing Xen timer for CPU 2 > alloc irq_desc for 1267 on node 0 > alloc kstat_irqs on node 0 > alloc irq_desc for 1266 on node 0 > alloc kstat_irqs on node 0 > cpu 2 spinlock event irq 1266 > alloc irq_desc for 1265 on node 0 > alloc kstat_irqs on node 0 > alloc irq_desc for 1264 on node 0 > alloc kstat_irqs on node 0 > alloc irq_desc for 1263 on node 0 > alloc kstat_irqs on node 0 > alloc irq_desc for 1262 on node 0 > alloc kstat_irqs on node 0 > Initializing CPU#2 > CPU: L1 I cache: 32K, L1 D cache: 32K > CPU: L2 cache: 256K > CPU: L3 cache: 8192K > CPU 2/0x0 -> Node 0 > CPU: Unsupported number of siblings 16 > installing Xen timer for CPU 3 > alloc irq_desc for 1261 on node 0 > alloc kstat_irqs on node 0 > alloc irq_desc for 1260 on node 0 > alloc kstat_irqs on node 0 > cpu 3 spinlock event irq 1260 > alloc irq_desc for 1259 on node 0 > alloc kstat_irqs on node 0 > alloc irq_desc for 1258 on node 0 > alloc kstat_irqs on node 0 > alloc irq_desc for 1257 on node 0 > alloc kstat_irqs on node 0 > alloc irq_desc for 1256 on node 0 > alloc kstat_irqs on node 0 > Initializing CPU#3 > CPU: L1 I cache: 32K, L1 D cache: 32K > CPU: L2 cache: 256K > CPU: L3 cache: 8192K > CPU 3/0x0 -> Node 0 > CPU: Unsupported number of siblings 16 > Brought up 4 CPUs > Grant table initialized > Time: 16:45:17 Date: 04/07/10 > NET: Registered protocol family 16 > alloc irq_desc for 1255 on node 0 > alloc kstat_irqs on node 0 > ACPI: bus type pci registered > PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 > PCI: MCFG area at e0000000 reserved in E820 > PCI: Using MMCONFIG at e0000000 - efffffff > PCI: Using configuration type 1 for base access > bio: create slab<bio-0> at 0 > ERROR: Unable to locate IOAPIC for GSI 9 > ACPI: EC: Look up EC in DSDT > ACPI Warning for \_SB_._OSC: Return type mismatch - found Integer, expected Buffer (20090903/nspredef-1006) > \_SB_:_OSC evaluation returned wrong type > _OSC request data:1 6 > ACPI: Executed 1 blocks of module-level executable AML code > ACPI: Interpreter enabled > ACPI: (supports S0 S1 S4 S5) > ACPI: Using IOAPIC for interrupt routing > ACPI Warning: Incorrect checksum in table [OEMB] - 91, should be 8E (20090903/tbutils-314) > ACPI Warning: Incorrect checksum in table [ ] - 7B, should be BF (20090903/tbutils-314) > ACPI: No dock devices found. > ACPI: PCI Root Bridge [PCI0] (0000:00) > pci 0000:00:03.0: PME# supported from D0 D3hot D3cold > pci 0000:00:03.0: PME# disabled > pci 0000:00:05.0: PME# supported from D0 D3hot D3cold > pci 0000:00:05.0: PME# disabled > pci 0000:00:1a.0: reg 10 32bit mmio: [0xfb3fc000-0xfb3fc3ff] > pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold > pci 0000:00:1a.0: PME# disabled > pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold > pci 0000:00:1c.0: PME# disabled > pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold > pci 0000:00:1c.4: PME# disabled > pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold > pci 0000:00:1c.5: PME# disabled > pci 0000:00:1d.0: reg 10 32bit mmio: [0xfb3fa000-0xfb3fa3ff] > pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold > pci 0000:00:1d.0: PME# disabled > pci 0000:00:1f.2: reg 10 io port: [0xb400-0xb407] > pci 0000:00:1f.2: reg 14 io port: [0xbc00-0xbc03] > pci 0000:00:1f.2: reg 18 io port: [0xb880-0xb887] > pci 0000:00:1f.2: reg 1c io port: [0xb800-0xb803] > pci 0000:00:1f.2: reg 20 io port: [0xb480-0xb49f] > pci 0000:00:1f.2: reg 24 32bit mmio: [0xfb3f8000-0xfb3f87ff] > pci 0000:00:1f.2: PME# supported from D3hot > pci 0000:00:1f.2: PME# disabled > pci 0000:00:1f.3: reg 10 64bit mmio: [0xfb3f6000-0xfb3f60ff] > pci 0000:00:1f.3: reg 20 io port: [0x400-0x41f] > pci 0000:03:00.0: reg 10 32bit mmio: [0xfb420000-0xfb43ffff] > pci 0000:03:00.0: reg 14 32bit mmio: [0xfb480000-0xfb4fffff] > pci 0000:03:00.0: reg 18 io port: [0xcc00-0xcc1f] > pci 0000:03:00.0: reg 1c 32bit mmio: [0xfb41c000-0xfb41ffff] > pci 0000:03:00.0: reg 30 32bit mmio pref: [0xfb440000-0xfb47ffff] > pci 0000:03:00.0: PME# supported from D0 D3hot D3cold > pci 0000:03:00.0: PME# disabled > pci 0000:00:1c.0: bridge io port: [0xc000-0xcfff] > pci 0000:00:1c.0: bridge 32bit mmio: [0xfb400000-0xfb4fffff] > pci 0000:04:00.0: reg 10 32bit mmio: [0xfb5e0000-0xfb5fffff] > pci 0000:04:00.0: reg 18 io port: [0xdc00-0xdc1f] > pci 0000:04:00.0: reg 1c 32bit mmio: [0xfb5dc000-0xfb5dffff] > pci 0000:04:00.0: PME# supported from D0 D3hot D3cold > pci 0000:04:00.0: PME# disabled > pci 0000:00:1c.4: bridge io port: [0xd000-0xdfff] > pci 0000:00:1c.4: bridge 32bit mmio: [0xfb500000-0xfb5fffff] > pci 0000:05:00.0: reg 10 32bit mmio: [0xfb6e0000-0xfb6fffff] > pci 0000:05:00.0: reg 18 io port: [0xec00-0xec1f] > pci 0000:05:00.0: reg 1c 32bit mmio: [0xfb6dc000-0xfb6dffff] > pci 0000:05:00.0: PME# supported from D0 D3hot D3cold > pci 0000:05:00.0: PME# disabled > pci 0000:00:1c.5: bridge io port: [0xe000-0xefff] > pci 0000:00:1c.5: bridge 32bit mmio: [0xfb600000-0xfb6fffff] > pci 0000:06:03.0: reg 10 32bit mmio pref: [0xfa000000-0xfaffffff] > pci 0000:06:03.0: reg 14 32bit mmio: [0xfb7fc000-0xfb7fffff] > pci 0000:06:03.0: reg 18 32bit mmio: [0xfb800000-0xfbffffff] > pci 0000:00:1e.0: transparent bridge > pci 0000:00:1e.0: bridge 32bit mmio: [0xfb700000-0xfbffffff] > pci 0000:00:1e.0: bridge 64bit mmio pref: [0xfa000000-0xfaffffff] > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3._PRT] > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT] > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR1E._PRT] > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0ehci_hcd 0000:00:1a.0: port 1 high speed > ehci_hcd 0000:00:1a.0: GetStatus port 1 status 001005 POWER sig=se0 PE CONNECT > ahci 0000:00:1f.2: version 3.0 > xen: registering gsi 19 triggering 0 polarity 1 > alloc irq_desc for 19 on node 0 > alloc kstat_irqs on node 0 > xen: --> irq=19 > ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 > alloc irq_desc for 1247 on node 0 > alloc kstat_irqs on node 0 > ahci: SSS flag set, parallel bus scan disabled > ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x3f impl SATA mode > ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems sxs apst > ahci 0000:00:1f.2: setting latency timer to 64 > scsi0 : ahci > scsi1 : ahci > scsi2 : ahci > scsi3 : ahci > scsi4 : ahci > scsi5 : ahci > ata1: SATA max UDMA/133 abar m2048@0xfb3f8000 port 0xfb3f8100 irq 1247 > ata2: SATA max UDMA/133 abar m2048@0xfb3f8000 port 0xfb3f8180 irq 1247 > ata3: SATA max UDMA/133 abar m2048@0xfb3f8000 port 0xfb3f8200 irq 1247 > ata4: SATA max UDMA/133 abar m2048@0xfb3f8000 port 0xfb3f8280 irq 1247 > ata5: SATA max UDMA/133 abar m2048@0xfb3f8000 port 0xfb3f8300 irq 1247 > ata6: SATA max UDMA/133 abar m2048@0xfb3f8000 port 0xfb3f8380 irq 1247 > usb 1-1: udev 2, busnum 1, minor = 1 > usb 1-1: New USB device found, idVendor=8087, idProduct=0020 > usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 > usb 1-1: usb_probe_device > usb 1-1: configuration #1 chosen from 1 choice > usb 1-1: adding 1-1:1.0 (config #1, interface 0) > hub 1-1:1.0: usb_probe_interface > hub 1-1:1.0: usb_probe_interface - got id > hub 1-1:1.0: USB hub found > hub 1-1:1.0: 6 ports detected > hub 1-1:1.0: standalone hub > hub 1-1:1.0: individual port power switching > hub 1-1:1.0: individual port over-current protection > hub 1-1:1.0: Single TT > hub 1-1:1.0: TT requires at most 8 FS bit times (666 ns) > hub 1-1:1.0: Port indicators are supported > hub 1-1:1.0: power on to power good time: 100ms > hub 1-1:1.0: local power source is good > hub 1-1:1.0: enabling power on all ports > hub 2-0:1.0: state 7 ports 2 chg 0002 evt 0000 > hub 2-0:1.0: port 1, status 0501, change 0000, 480 Mb/s > ehci_hcd 0000:00:1d.0: port 1 high speed > ehci_hcd 0000:00:1d.0: GetStatus port 1 status 001005 POWER sig=se0 PE CONNECT > hub 1-1:1.0: port 2: status 0101 change 0001 > usb 2-1: new high speed USB device using ehci_hcd and address 2 > ehci_hcd 0000:00:1d.0: port 1 high speed > ehci_hcd 0000:00:1d.0: GetStatus port 1 status 001005 POWER sig=se0 PE CONNECT > usb 1-1: link qh256-0001/ffff8800bc51f9c0 start 1 [1/0 us] > usb 2-1: udev 2, busnum 2, minor = 129 > usb 2-1: New USB device found, idVendor=8087, idProduct=0020 > usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 > usb 2-1: usb_probe_device > usb 2-1: configuration #1 chosen from 1 choice > usb 2-1: adding 2-1:1.0 (config #1, interface 0) > hub 2-1:1.0: usb_probe_interface > hub 2-1:1.0: usb_probe_interface - got id > hub 2-1:1.0: USB hub found > hub 2-1:1.0: 8 ports detected > hub 2-1:1.0: standalone hub > hub 2-1:1.0: individual port power switching > hub 2-1:1.0: individual port over-current protection > hub 2-1:1.0: Single TT > hub 2-1:1.0: TT requires at most 8 FS bit times (666 ns) > hub 2-1:1.0: Port indicators are supported > hub 2-1:1.0: power on to power good time: 100ms > hub 2-1:1.0: local power source is good > hub 2-1:1.0: enabling power on all ports > hub 1-1:1.0: state 7 ports 6 chg 0004 evt 0000 > hub 1-1:1.0: port 2, status 0101, change 0000, 12 Mb/s > hub 1-1:1.0: port 2 not reset yet, waiting 10ms > usb 1-1.2: new full speed USB device using ehci_hcd and address 3 > ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) > hub 1-1:1.0: port 2 not reset yet, waiting 10ms > ata1.00: ATA-8: WDC WD10EADS-00P8B0, 01.00A01, max UDMA/133 > ata1.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA > ata1.00: configured for UDMA/133 > scsi 0:0:0:0: Direct-Access ATA WDC WD10EADS-00P 01.0 PQ: 0 ANSI: 5 > sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) > sd 0:0:0:0: [sda] Write Protect is off > sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 > sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA > sd 0:0:0:0: Attached scsi generic sg0 type 0 > sda: > usb 2-1: link qh256-0001/ffff8800bc51f6c0 start 1 [1/0 us] > sda1 sda2 sda3 sda4 > sd 0:0:0:0: [sda] Attached SCSI disk > usb 1-1.2: skipped 1 descriptor after interface > usb 1-1.2: skipped 1 descriptor after interface > usb 1-1.2: default language 0x0409 > usb 1-1.2: udev 3, busnum 1, minor = 2 > usb 1-1.2: New USB device found, idVendor=0557, idProduct=2221 > usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 > usb 1-1.2: Product: Hermon USB hidmouse Device > usb 1-1.2: Manufacturer: Winbond Electronics Corp > usb 1-1.2: usb_probe_device > usb 1-1.2: configuration #1 chosen from 1 choice > usb 1-1.2: adding 1-1.2:1.0 (config #1, interface 0) > usbhid 1-1.2:1.0: usb_probe_interface > usbhid 1-1.2:1.0: usb_probe_interface - got id > input: Winbond Electronics Corp Hermon USB hidmouse Device as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input4 > generic-usb 0003:0557:2221.0001: input,hidraw0: USB HID v1.00 Mouse [Winbond Electronics Corp Hermon USB hidmouse Device] on usb-0000:00:1a.0-1.2/input0 > usb 1-1.2: adding 1-1.2:1.1 (config #1, interface 1) > usbhid 1-1.2:1.1: usb_probe_interface > usbhid 1-1.2:1.1: usb_probe_interface - got id > input: Winbond Electronics Corp Hermon USB hidmouse Device as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.1/input/input5 > usb 1-1.2: link qh8-0601/ffff8800be6225c0 start 2 [1/2 us] > generic-usb 0003:0557:2221.0002: input,hidraw1: USB HID v1.00 Keyboard [Winbond Electronics Corp Hermon USB hidmouse Device] on usb-0000:00:1a.0-1.2/input1 > hub 2-1:1.0: state 7 ports 8 chg 0000 evt 0000 > hub 1-1:1.0: state 7 ports 6 chg 0000 evt 0004 > ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) > ata2.00: ATA-7: SAMSUNG HD103SI, 1AG01118, max UDMA7 > ata2.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA > ata2.00: configured for UDMA/133 > scsi 1:0:0:0: Direct-Access ATA SAMSUNG HD103SI 1AG0 PQ: 0 ANSI: 5 > sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) > sd 1:0:0:0: Attached scsi generic sg1 type 0 > sd 1:0:0:0: [sdb] Write Protect is off > sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 > sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA > sdb: sdb1 sdb2 sdb3 sdb4 > sd 1:0:0:0: [sdb] Attached SCSI disk > input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input6 > ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) > ata3.00: ATA-8: WDC WD10EADS-00P8B0, 01.00A01, max UDMA/133 > ata3.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA > ata3.00: configured for UDMA/133 > scsi 2:0:0:0: Direct-Access ATA WDC WD10EADS-00P 01.0 PQ: 0 ANSI: 5 > sd 2:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) > sd 2:0:0:0: Attached scsi generic sg2 type 0 > sd 2:0:0:0: [sdc] Write Protect is off > sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 > sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA > sdc: sdc1 sdc2 sdc3 sdc4 > sd 2:0:0:0: [sdc] Attached SCSI disk > hub 2-1:1.0: hub_suspend > usb 2-1: unlink qh256-0001/ffff8800bc51f6c0 start 1 [1/0 us] > usb 2-1: usb auto-suspend > ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) > ata4.00: ATA-7: SAMSUNG HD103SI, 1AG01118, max UDMA7 > ata4.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA > ata4.00: configured for UDMA/133 > scsi 3:0:0:0: Direct-Access ATA SAMSUNG HD103SI 1AG0 PQ: 0 ANSI: 5 > sd 3:0:0:0: [sdd] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) > sd 3:0:0:0: Attached scsi generic sg3 type 0 > sd 3:0:0:0: [sdd] Write Protect is off > sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00 > sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA > sdd: sdd1 sdd2 sdd3 sdd4 > sd 3:0:0:0: [sdd] Attached SCSI disk > ata5: SATA link down (SStatus 0 SControl 300) > ata6: SATA link down (SStatus 0 SControl 300) > md: raid10 personality registered for level 10 > Intel AES-NI instructions are not detected. > md: md0 stopped. > md: bind<sdb3> > md: bind<sdc3> > md: bind<sdd3> > md: bind<sda3> > md: kicking non-fresh sdd3 from array! > md: unbind<sdd3> > md: export_rdev(sdd3) > md: kicking non-fresh sdb3 from array! > md: unbind<sdb3> > md: export_rdev(sdb3) > raid10: raid set md0 active with 2 out of 4 devices > md0: detected capacity change from 0 to 838860668928 > md0: unknown partition table > hub 2-0:1.0: hub_suspend > usb usb2: bus auto-suspend > ehci_hcd 0000:00:1d.0: suspend root hub > > Password:*********** > EXT4-fs (dm-2): mounted filesystem with ordered data mode > type=1404 audit(1270658817.238:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295 > SELinux: 8192 avtab hash slots, 162639 rules. > SELinux: 8192 avtab hash slots, 162639 rules. > SELinux: 8 users, 12 roles, 3092 types, 152 bools, 1 sens, 1024 cats > SELinux: 77 classes, 162639 rules > SELinux: Completing initialization. > SELinux: Setting up existing superblocks. > SELinux: initialized (dev dm-2, type ext4), uses xattr > SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs > SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts > SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs > SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs > SELinux: initialized (dev devpts, type devpts), uses transition SIDs > SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts > SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts > SELinux: initialized (dev pipefs, type pipefs), uses task SIDs > SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts > SELinux: initialized (dev sockfs, type sockfs), uses task SIDs > SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs > SELinux: initialized (dev proc, type proc), uses genfs_contexts > SELinux: initialized (dev bdev, type bdev), uses genfs_contexts > SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts > SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts > type=1403 audit(1270658817.689:3): policy loaded auid=4294967295 ses=4294967295 > Welcome to Fedora > Press 'I' to enter interactive startup. > Starting udev: udev: starting version 145 > ACPI: SSDT 00000000bf7b0180 00F20 (v01 DpgPmm P001Ist 00000011 INTL 20051117) > ACPI: SSDT 00000000bf7b10a0 004D5 (v01 PmRef P001Cst 00003001 INTL 20051117) > (XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120] > (XEN) Monitor-Mwait will be used to enter C-1 state > (XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120] > (XEN) Monitor-Mwait will be used to enter C-2 state > (XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120] > (XEN) Monitor-Mwait will be used to enter C-3 state > ACPI: CPU-1 (power states: C1[C1] C2[C2] C3[C3]) > e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k2 > e1000e: Copyright (c) 1999-2008 Intel Corporation. > xen: registering gsi 16 triggering 0 polarity 1 > xen_allocate_pirq: returning irq 16 for gsi 16 > xen: --> irq=16 > Already setup the GSI :16 > e1000e 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 > e1000e 0000:03:00.0: setting latency timer to 64 > alloc irq_desc for 1246 on node 0 > alloc kstat_irqs on node 0 > alloc irq_desc for 1245 on node 0 > alloc kstat_irqs on node 0 > alloc irq_desc for 1244 on node 0 > alloc kstat_irqs on node 0 > (XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120] > (XEN) Monitor-Mwait will be used to enter C-1 state > (XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120] > (XEN) Monitor-Mwait will be used to enter C-2 state > (XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120] > (XEN) Monitor-Mwait will be used to enter C-3 state > ACPI: CPU-1 (power states: C1[C1] C2[C2] C3[C3]) > 0000:03:00.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:1b:21:4f:65:6b > 0000:03:00.0: eth0: Intel(R) PRO/1000 Network Connection > 0000:03:00.0: eth0: MAC: 3, PHY: 8, PBA No: e46981-003 > xen: registering gsi 16 triggering 0 polarity 1 > xen_allocate_pirq: returning irq 16 for gsi 16 > xen: --> irq=16 > Already setup the GSI :16 > e1000e 0000:04:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 > e1000e 0000:04:00.0: setting latency timer to 64 > alloc irq_desc for 1243 on node 0 > alloc kstat_irqs on node 0 > alloc irq_desc for 1242 on node 0 > alloc kstat_irqs on node 0 > alloc irq_desc for 1241 on node 0 > alloc kstat_irqs on node 0 > (XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120] > (XEN) Monitor-Mwait will be used to enter C-1 state > (XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120] > (XEN) Monitor-Mwait will be used to enter C-2 state > (XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120] > (XEN) Monitor-Mwait will be used to enter C-3 state > ACPI: CPU-1 (power states: C1[C1] C2[C2] C3[C3]) > (XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120] > (XEN) Monitor-Mwait will be used to enter C-1 state > (XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120] > (XEN) Monitor-Mwait will be used to enter C-2 state > (XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120] > (XEN) Monitor-Mwait will be used to enter C-3 state > ACPI: CPU-1 (power states: C1[C1] C2[C2] C3[C3]) > 0000:04:00.0: eth1: (PCI Express:2.5GB/s:Width x1) 00:30:48:dd:eb:66 > 0000:04:00.0: eth1: Intel(R) PRO/1000 Network Connection > 0000:04:00.0: eth1: MAC: 3, PHY: 8, PBA No: 0101ff-0ff > xen: registering gsi 17 triggering 0 polarity 1 > xen_allocate_pirq: returning irq 17 for gsi 17 > xen: --> irq=17 > Already setup the GSI :17 > e1000e 0000:05:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 > e1000e 0000:05:00.0: setting latency timer to 64 > alloc irq_desc for 1240 on node 0 > alloc kstat_irqs on node 0 > alloc irq_desc for 1239 on node 0 > alloc kstat_irqs on node 0 > alloc irq_desc for 1238 on node 0 > alloc kstat_irqs on node 0 > 0000:05:00.0: eth2: (PCI Express:2.5GB/s:Width x1) 00:30:48:dd:eb:67 > 0000:05:00.0: eth2: Intel(R) PRO/1000 Network Connection > 0000:05:00.0: eth2: MAC: 3, PHY: 8, PBA No: 0101ff-0ff > udev: renamed network interface eth2 to eth1 > udev: renamed network interface eth0 to eth2 > udev: renamed network interface eth1_rename to eth0 > mdadm: /dev/md0 is already in use. > Key slot 0 unlocked. > Key slot 0 unlocked. > device-mapper: multipath: version 1.1.0 loaded > Setting up Logical Volume Management: 14 logical volume(s) in volume group "vg_lilith-raid" now active > [ OK ] > Checking filesystems > Checking all file systems. > [/sbin/fsck.ext4 (1) -- /] fsck.ext4 -a /dev/mapper/vg_lilith--raid-root > /dev/mapper/vg_lilith--raid-root contains a file system with errors, check forced. > /dev/mapper/vg_lilith--raid-root: 343615/2564096 files (0.2% non-contiguous), 2390774/10240000 blocks > [/sbin/fsck.ext4 (1) -- /boot] fsck.ext4 -a /dev/sda2 > [/sbin/fsck.ext4 (2) -- /boot-spare] fsck.ext4 -a /dev/sdb2 > /dev/sdb2: clean, 11/66384 files, 12695/265072 blocks > /dev/sda2: clean, 89/66384 files, 69878/265072 blocks > [/sbin/fsck.ext4 (1) -- /home] fsck.ext4 -a /dev/mapper/luks-11eb0145-088a-4c13-acf4-9784e82bb1e3 > /dev/mapper/luks-11eb0145-088a-4c13-acf4-9784e82bb1e3: clean, 506715/12804096 files, 10193956/51199495 blocks > [/sbin/fsck.ext4 (1) -- /var] fsck.ext4 -a /dev/mapper/luks-37e6b844-a112-427c-be60-ae6f4d9c5041 > /dev/mapper/luks-37e6b844-a112-427c-be60-ae6f4d9c5041: clean, 21026/5120000 files, 490586/20479495 blocks > [ OK ] > Remounting root filesystem in read-write mode: [ OK ] > Mounting local filesystems: EXT4-fs (sda2): mounted filesystem with ordered data mode > SELinux: initialized (dev sda2, type ext4), uses xattr > EXT4-fs (sdb2): mounted filesystem with ordered data mode > SELinux: initialized (dev sdb2, type ext4), uses xattr > EXT4-fs (dm-15): mounted filesystem with ordered data mode > SELinux: initialized (dev dm-15, type ext4), uses xattr > EXT4-fs (dm-16): mounted filesystem with ordered data mode > SELinux: initialized (dev dm-16, type ext4), uses xattr > SELinux: initialized (dev xenfs, type xenfs), uses genfs_contexts > [ OK ] > Enabling local filesystem quotas: [ OK ] > Enabling /etc/fstab swaps: Adding 16381972k swap on /dev/mapper/luks-2aac27aa-0bb6-46cc-8a7a-83af1ca296a2. Priority:-1 extents:1 across:16381972k > [ OK ] > SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts > Entering non-interactive startup > Applying Intel CPU microcode update: platform microcode: firmware: requesting intel-ucode/06-1e-05 > platform microcode: firmware: requesting intel-ucode/06-1e-05 > platform microcode: firmware: requesting intel-ucode/06-1e-05 > platform microcode: firmware: requesting intel-ucode/06-1e-05 > Microcode Update Driver: v2.00<tigran@aivazian.fsnet.co.uk>, Peter Oruba > Microcode Update Driver: v2.00 removed. > Starting monitoring for VG vg_lilith-raid: 14 logical volume(s) in volume group "vg_lilith-raid" monitored > [ OK ] > ip6tables: Applying firewall rules: [ OK ] > ip6tables: Loading additional modules: nf_conntrack_netbios_ns [ OK ] > Starting auditd: [ OK ] > Starting portreserve: [ OK ] > Starting system logger: [ OK ] > Starting irqbalance: [ OK ] > Starting rpcbind: [ OK ] > Starting mdmonitor: [ OK ] > Starting system message bus: [ OK ] > Starting Avahi daemon... [ OK ] > Starting NFS statd: [ OK ] > Starting RPC idmapd: FATAL: Module sunrpc not found. > FATAL: Error running install command for sunrpc > Error: RPC MTAB does not exist. > Starting cups: [ OK ] > Starting acpi daemon: [ OK ] > Starting HAL daemon: [ OK ] > Starting PC/SC smart card daemon (pcscd): [ OK ] > Retrigger failed udev events[ OK ] > Setting network parameters... [ OK ] > Starting NetworkManager daemon: [ OK ] > Enabling Bluetooth devices: > Starting sshd: [ OK ] > ADDRCONF(NETDEV_UP): eth2: link is not ready > ntpdate: Synchronizing with time server: ADDRCONF(NETDEV_UP): eth0: link is not ready > ADDRCONF(NETDEV_UP): eth1: link is not ready > [FAILED] > Starting ntpd: [ OK ] > Starting abrt daemon: [ OK ] > usb 1-1.2: link qh8-0601/ffff8800b58ba740 start 3 [1/2 us] > > [ OK ] crond: [ OK ] > Enabling monthly Smolt checkin: [ OK ] > [ OK ] atd: [ OK ] > Starting libvirtd daemon: [ OK ] > Bridge firewalling registered > virbr0: starting userspace STP failed, starting kernel STP > e1000e: eth1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX > ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready > e1000e: eth2 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX > ADDRCONF(NETDEV_CHANGE): eth2: link becomes ready > e1000e: eth0 NICMbps Full Duplex, Flow Control: RX/TX > ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready > SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs > SELinux: initialized (dev proc, type proc), uses genfs_contexts > SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs > > Fedora release 12 (Constantine) > Kernel 2.6.32.11 on an x86_64 (/dev/hvc0) > > lilith.goop.org login: usb usb2: usb auto-resume > ehci_hcd 0000:00:1d.0: resume root hub > hub 2-0:1.0: hub_resume > hub 2-0:1.0: port 1: status 0507 change 0000 > usb 2-1: usb auto-resume > hub 2-0:1.0: state 7 ports 2 chg 0000 evt 0000 > ehci_hcd 0000:00:1d.0: GetStatus port 1 status 001005 POWER sig=se0 PE CONNECT > usb 2-1: finish resume > hub 2-1:1.0: hub_resume > ehci_hcd 0000:00:1d.0: reused qh ffff8800bc51f6c0 schedule > usb 2-1: link qh256-0001/ffff8800bc51f6c0 start 1 [1/0 us] > hub 2-1:1.0: state 7 ports > > ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: New DMAR errors in Xen 4.1 2010-04-08 2:32 ` Weidong Han @ 2010-04-08 16:58 ` Jeremy Fitzhardinge 0 siblings, 0 replies; 7+ messages in thread From: Jeremy Fitzhardinge @ 2010-04-08 16:58 UTC (permalink / raw) To: Weidong Han; +Cc: Xen-devel, Keir Fraser On 04/07/2010 07:32 PM, Weidong Han wrote: > Jeremy Fitzhardinge wrote: >> On 04/06/2010 07:50 PM, Weidong Han wrote: >> >>>> It turns out its... "Enable debug=y by default in the build." So I >>>> guess these errors have been happening silently thus far? >>>> >>>> J >>>> >>> I don't encounter this issue. These DMAR fault messages will be >>> printed even when debug=n. what platform are you using? could you post >>> complete booting log with "iommu=verbose"? >>> >> >> This is a Supermicro X8SIL-F system, which is a Lynnfield + Ibex Peak >> system. >> >> I've attached two boot logs below. The first is one where there lots of >> DMAR errors early, and the system is a disaster (basically doesn't come >> up, lots of devices fail to init). Unfortunately it looks like I >> mistyped "verbose". >> >> The second boot was immediately after the first and it comes up cleanly >> with no DMAR errors at all. So it appears there's some non-determinism >> there. The gmfns in the messages always appear to be about he same, so >> I wonder if it depends on exactly what pages the kernel ends up >> allocating for IO? (It probably also means my bisection results are >> suspect.) >> > the boot log with "iommu=verbose" looks fine. when you mistyped > "verbose", it equals to default iommu setting, that's iommu=1. > > Can I understand that: the DMAR faults only occur when "debug=y" with > default iommu setting (iommu=1)? I usually use iommu=pv; is that equivalent? Sometimes it appears to just work with no DMAR errors at all. I'm not at all confident about by bisection. > Besides print more info, "iommu=verbose" also invokes > process_pending_softirqs in domain_context_mapping. Could you try > below patch to also call process_pending_softirqs for "iommu=1"? Will do. > > diff -r 28e5409e3fb3 xen/drivers/passthrough/vtd/iommu.c > --- a/xen/drivers/passthrough/vtd/iommu.c Wed Apr 07 16:22:05 > 2010 +0100 > +++ b/xen/drivers/passthrough/vtd/iommu.c Thu Apr 08 10:18:15 > 2010 +0800 > @@ -1366,7 +1366,7 @@ static int domain_context_mapping(struct > break; > } > > - if ( iommu_verbose ) > +// if ( iommu_verbose ) > process_pending_softirqs(); > > return ret; J > >> (BTW, what's a "type 9" E820 region?) >> >> Thanks, >> J >> >> >> __ __ _ _ _ _ _ _ >> \ \/ /___ _ __ | || | / | _ _ _ __ ___| |_ __ _| |__ | | ___ >> \ // _ \ '_ \ | || |_ | |__| | | | '_ \/ __| __/ _` | '_ \| |/ _ \ >> / \ __/ | | | |__ _|| |__| |_| | | | \__ \ || (_| | |_) | | __/ >> /_/\_\___|_| |_| |_|(_)_| \__,_|_| |_|___/\__\__,_|_.__/|_|\___| >> >> (XEN) Xen version 4.1-unstable (jeremy@) (gcc version 4.4.3 20100127 >> (Red Hat 4.4.3-4) (GCC) ) Tue Apr 6 17:23:29 PDT 2010 >> (XEN) Latest ChangeSet: Tue Apr 06 17:23:12 2010 -0700 >> 21115:ea6c67dc4577 >> (XEN) Command line: com2=115200,8n1,0x3e8,5 console=com2,vga >> cpufreq=xen iommu=verbos8 >> (XEN) Video information: >> (XEN) VGA is text mode 80x25, font 8x16 >> (XEN) VBE/DDC methods: none; EDID transfer time: 0 seconds >> (XEN) EDID info not retrieved because no DDC retrieval method detected >> (XEN) Disc information: >> (XEN) Found 4 MBR signatures >> (XEN) Found 4 EDD information structures >> (XEN) Xen-e820 RAM map: >> (XEN) 0000000000000000 - 000000000009d800 (usable) >> (XEN) 000000000009d800 - 00000000000a0000 (reserved) >> (XEN) 00000000000e0000 - 0000000000100000 (reserved) >> (XEN) 0000000000100000 - 00000000bf790000 (usable) >> (XEN) 00000000bf79e000 - 00000000bf7a0000 type 9 >> (XEN) 00000000bf7a0000 - 00000000bf7ae000 (ACPI data) >> (XEN) 00000000bf7ae000 - 00000000bf7d0000 (ACPI NVS) >> (XEN) 00000000bf7d0000 - 00000000bf7e0000 (reserved) >> (XEN) 00000000bf7ed000 - 00000000c0000000 (reserved) >> (XEN) 00000000e0000000 - 00000000f0000000 (reserved) >> (XEN) 00000000fed20000 - 00000000fed40000 (reserved) >> (XEN) 00000000fee00000 - 00000000fee01000 (reserved) >> (XEN) 0000000100000000 - 0000000140000000 (usable) >> (XEN) ACPI: RSDP 000FA110, 0024 (r2 ACPIAM) >> (XEN) ACPI: XSDT BF7A0100, 0084 (r1 SMCI 20100225 >> MSFT 97) >> (XEN) ACPI: FACP BF7A0290, 00F4 (r4 022510 FACP1918 20100225 >> MSFT 97) >> (XEN) ACPI: DSDT BF7A05F0, 6C55 (r2 10605 10605000 0 INTL >> 20051117) >> (XEN) ACPI: FACS BF7AE000, 0040 >> (XEN) ACPI: APIC BF7A0390, 0092 (r2 022510 APIC1918 20100225 >> MSFT 97) >> (XEN) ACPI: MCFG BF7A0430, 003C (r1 022510 OEMMCFG 20100225 >> MSFT 97) >> (XEN) ACPI: OEMB BF7AE040, 0073 (r1 022510 OEMB1918 20100225 >> MSFT 97) >> (XEN) ACPI: HPET BF7AA5F0, 0038 (r1 022510 OEMHPET 20100225 >> MSFT 97) >> (XEN) ACPI: GSCI BF7AE0C0, 2024 (r1 022510 GMCHSCI 20100225 >> MSFT 97) >> (XEN) ACPI: DMAR BF7B00F0, 0090 (r1 AMI OEMDMAR 1 >> MSFT 97) >> (XEN) ACPI: SSDT BF7B1580, 0363 (r1 DpgPmm CpuPm 12 INTL >> 20051117) >> (XEN) ACPI: EINJ BF7AA630, 0130 (r1 AMIER AMI_EINJ 20100225 >> MSFT 97) >> (XEN) ACPI: BERT BF7AA7C0, 0030 (r1 AMIER AMI_BERT 20100225 >> MSFT 97) >> (XEN) ACPI: ERST BF7AA7F0, 01B0 (r1 AMIER AMI_ERST 20100225 >> MSFT 97) >> (XEN) ACPI: HEST BF7AA9A0, 00A8 (r1 AMIER ABC_HEST 20100225 >> MSFT 97) >> (XEN) System RAM: 4056MB (4153584kB) >> (XEN) No NUMA configuration found >> (XEN) Faking a node at 0000000000000000-0000000140000000 >> (XEN) Domain heap initialised >> (XEN) found SMP MP-table at 000ff780 >> (XEN) DMI present. >> (XEN) Using APIC driver default >> (XEN) ACPI: PM-Timer IO Port: 0x808 >> (XEN) ACPI: ACPI SLEEP INFO: pm1x_cnt[804,0], pm1x_evt[800,0] >> (XEN) ACPI: wakeup_vec[bf7ae00c], vec_size[20] >> (XEN) ACPI: Local APIC address 0xfee00000 >> (XEN) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) >> (XEN) Processor #0 7:14 APIC version 21 >> (XEN) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) >> (XEN) Processor #2 7:14 APIC version 21 >> (XEN) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled) >> (XEN) Processor #4 7:14 APIC version 21 >> (XEN) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled) >> (XEN) Processor #6 7:14 APIC version 21 >> (XEN) ACPI: LAPIC (acpi_id[0x05] lapic_id[0x84] disabled) >> (XEN) ACPI: LAPIC (acpi_id[0x06] lapic_id[0x85] disabled) >> (XEN) ACPI: LAPIC (acpi_id[0x07] lapic_id[0x86] disabled) >> (XEN) ACPI: LAPIC (acpi_id[0x08] lapic_id[0x87] disabled) >> (XEN) ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) >> (XEN) ACPI: IOAPIC (id[0x07] address[0xfec00000] gsi_base[0]) >> (XEN) IOAPIC[0]: apic_id 7, version 32, address 0xfec00000, GSI 0-23 >> (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) >> (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) >> (XEN) ACPI: IRQ0 used by override. >> (XEN) ACPI: IRQ2 used by override. >> (XEN) ACPI: IRQ9 used by override. >> (XEN) Enabling APIC mode: Flat. Using 1 I/O APICs >> (XEN) ACPI: HPET id: 0x8086a701 base: 0xfed00000 >> (XEN) PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 >> (XEN) PCI: MCFG area at e0000000 reserved in E820 >> (XEN) Using ACPI (MADT) for SMP configuration information >> (XEN) Using scheduler: SMP Credit Scheduler (credit) >> (XEN) Detected 2400.067 MHz processor. >> (XEN) Initing memory sharing. >> (XEN) EPT support 2M super page. >> (XEN) VMX: Supported advanced features: >> (XEN) - APIC MMIO access virtualisation >> (XEN) - APIC TPR shadow >> (XEN) - Extended Page Tables (EPT) >> (XEN) - Virtual-Processor Identifiers (VPID) >> (XEN) - Virtual NMI >> (XEN) - MSR direct-access bitmap >> (XEN) HVM: ASIDs enabled. >> (XEN) HVM: VMX enabled >> (XEN) HVM: Hardware Assisted Paging detected. >> (XEN) Intel machine check reporting enabled >> (XEN) Intel VT-d Snoop Control supported. >> (XEN) Intel VT-d DMA Passthrough not supported. >> (XEN) Intel VT-d Queued Invalidation supported. >> (XEN) Intel VT-d Interrupt Remapping not supported. >> (XEN) I/O virtualisation enabled >> (XEN) I/O virtualisation for PV guests disabled >> (XEN) EPT support 2M super page. >> (XEN) EPT support 2M super page. >> (XEN) EPT support 2M super page. >> (XEN) Total of 4 processors activated. >> (XEN) ENABLING IO-APIC IRQs >> (XEN) -> Using new ACK method >> (XEN) ..TIMER: vector=0xF0 apic1=0 pin1=2 apic2=-1 pin2=-1 >> (XEN) TSC is reliable, synchronization unnecessary >> (XEN) Platform timer is 14.318MHz HPET >> �(XEN) Allocated console ring of 32 KiB. >> (XEN) microcode.c:73:d32767 microcode: CPU1 resumed >> (XEN) microcode.c:73:d32767 microcode: CPU2 resumed >> (XEN) Brought up 4 CPUs >> (XEN) microcode.c:73:d32767 microcode: CPU3 resumed >> (XEN) Turbo Mode detected! >> (XEN) HPET: 8 timers in total, 8 timers will be used for broadcast >> (XEN) ACPI sleep modes: S3 >> (XEN) mcheck_poll: Machine check polling timer started. >> (XEN) *** LOADING DOMAIN 0 *** >> (XEN) elf_parse_binary: phdr: paddr=0x1000000 memsz=0x69c000 >> (XEN) elf_parse_binary: phdr: paddr=0x169c000 memsz=0xe3cb0 >> (XEN) elf_parse_binary: phdr: paddr=0x1780000 memsz=0x888 >> (XEN) elf_parse_binary: phdr: paddr=0x1781000 memsz=0x14498 >> (XEN) elf_parse_binary: phdr: paddr=0x1796000 memsz=0x9f5000 >> (XEN) elf_parse_binary: memory: 0x1000000 -> 0x218b000 >> (XEN) elf_xen_parse_note: GUEST_OS = "linux" >> (XEN) elf_xen_parse_note: GUEST_VERSION = "2.6" >> (XEN) elf_xen_parse_note: XEN_VERSION = "xen-3.0" >> (XEN) elf_xen_parse_note: VIRT_BASE = 0xffffffff80000000 >> (XEN) elf_xen_parse_note: ENTRY = 0xffffffff81796200 >> (XEN) elf_xen_parse_note: HYPERCALL_PAGE = 0xffffffff81009000 >> (XEN) elf_xen_parse_note: FEATURES = >> "!writable_page_tables|pae_pgdir_above_4gb" >> (XEN) elf_xen_parse_note: PAE_MODE = "yes" >> (XEN) elf_xen_parse_note: LOADER = "generic" >> (XEN) elf_xen_parse_note: unknown xen elf note (0xd) >> (XEN) elf_xen_parse_note: SUSPEND_CANCEL = 0x1 >> (XEN) elf_xen_parse_note: HV_START_LOW = 0xffff800000000000 >> (XEN) elf_xen_parse_note: PADDR_OFFSET = 0x0 >> (XEN) elf_xen_addr_calc_check: addresses: >> (XEN) virt_base = 0xffffffff80000000 >> (XEN) elf_paddr_offset = 0x0 >> (XEN) virt_offset = 0xffffffff80000000 >> (XEN) virt_kstart = 0xffffffff81000000 >> (XEN) virt_kend = 0xffffffff8218b000 >> (XEN) virt_entry = 0xffffffff81796200 >> (XEN) p2m_base = 0xffffffffffffffff >> (XEN) Xen kernel: 64-bit, lsb, compat32 >> (XEN) Dom0 kernel: 64-bit, PAE, lsb, paddr 0x1000000 -> 0x218b000 >> (XEN) PHYSICAL MEMORY ARRANGEMENT: >> (XEN) Dom0 alloc.: 0000000138000000->000000013c000000 (981633 >> pages to be allocated) >> (XEN) VIRTUAL MEMORY ARRANGEMENT: >> (XEN) Loaded kernel: ffffffff81000000->ffffffff8218b000 >> (XEN) Init. ramdisk: ffffffff8218b000->ffffffff82b69800 >> (XEN) Phys-Mach map: ffffffff82b6a000->ffffffff83307408 >> (XEN) Start info: ffffffff83308000->ffffffff833084b4 >> (XEN) Page tables: ffffffff83309000->ffffffff83326000 >> (XEN) Boot stack: ffffffff83326000->ffffffff83327000 >> (XEN) TOTAL: ffffffff80000000->ffffffff83400000 >> (XEN) ENTRY ADDRESS: ffffffff81796200 >> (XEN) Dom0 has maximum 4 VCPUs >> (XEN) elf_load_binary: phdr 0 at 0xffffffff81000000 -> >> 0xffffffff8169c000 >> (XEN) elf_load_binary: phdr 1 at 0xffffffff8169c000 -> >> 0xffffffff8177fcb0 >> (XEN) elf_load_binary: phdr 2 at 0xffffffff81780000 -> >> 0xffffffff81780888 >> (XEN) elf_load_binary: phdr 3 at 0xffffffff81781000 -> >> 0xffffffff81795498 >> (XEN) elf_load_binary: phdr 4 at 0xffffffff81796000 -> >> 0xffffffff81830000 >> (XEN) Scrubbing Free RAM: .done. >> (XEN) Xen trace buffers: disabled >> (XEN) Std. Loglevel: All >> (XEN) Guest Loglevel: All >> (XEN) Xen is relinquishing VGA console. >> (XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch >> input to Xen) >> (XEN) Freed 164kB init memory. >> mapping kernel into physical memory >> Xen: setup ISA identity maps >> about to get started... >> Initializing cgroup subsys cpuset >> Initializing cgroup subsys cpu >> Linux version 2.6.32.11 (jeremy@lilith.goop.org) (gcc version 4.4.3 >> 20100127 (Red Hat 4.4.3-4) (GCC) ) #7 SMP PREEMPT Mon Apr 5 14:58:54 >> PDT 2010 >> Command line: ro root=/dev/mapper/vg_lilith--raid-root >> LANG=en_US.UTF-8 SYSFONT=latarcyrheb-sun16 KEYBOARDTYPE=pc >> KEYTABLE=us ignore_loglevel earlyprintk=xen console=hvc0 rdshell >> pcie_aspm=off >> KERNEL supported cpus: >> Intel GenuineIntel >> AMD AuthenticAMD >> Centaur CentaurHauls >> xen_release_chunk: looking at area pfn bf790-bf79e: 14 pages freed >> xen_release_chunk: looking at area pfn bf7e0-bf7ed: 13 pages freed >> xen_release_chunk: looking at area pfn c0000-e0000: 131072 pages freed >> xen_release_chunk: looking at area pfn f0000-fec00: 14977 pages freed >> xen_release_chunk: looking at area pfn fec01-fed20: 0 pages freed >> xen_release_chunk: looking at area pfn fed40-fee00: 0 pages freed >> released 146076 pages of unused memory >> BIOS-provided physical RAM map: >> Xen: 0000000000000000 - 000000000009d800 (usable) >> Xen: 000000000009d800 - 0000000000100000 (reserved) >> Xen: 0000000000100000 - 00000000bf790000 (usable) >> Xen: 00000000bf79e000 - 00000000bf7a0000 type 9 >> Xen: 00000000bf7a0000 - 00000000bf7ae000 (ACPI data) >> Xen: 00000000bf7ae000 - 00000000bf7d0000 (ACPI NVS) >> Xen: 00000000bf7d0000 - 00000000bf7e0000 (reserved) >> Xen: 00000000bf7ed000 - 00000000c0000000 (reserved) >> Xen: 00000000e0000000 - 00000000f0000000 (reserved) >> Xen: 00000000fec00000 - 00000000fec01000 (reserved) >> Xen: 00000000fed20000 - 00000000fed40000 (reserved) >> Xen: 00000000fee00000 - 00000000fee01000 (reserved) >> debug: ignoring loglevel setting. >> bootconsole [xenboot0] enabled >> DMI present. >> last_pfn = 0xbf790 max_arch_pfn = 0x400000000 >> x86 PAT enabled: cpu 0, old 0x50100070406, new 0x7010600070106 >> initial memory mapped : 0 - 20000000 >> init_memory_mapping: 0000000000000000-00000000bf790000 >> 0000000000 - 00bf790000 page 4k >> kernel direct mapping tables up to bf790000 @ 100000-700000 >> RAMDISK: 0218b000 - 02b69800 >> ACPI: RSDP 00000000000fa110 00024 (v02 ACPIAM) >> ACPI: XSDT 00000000bf7a0100 00084 (v01 SMCI 20100225 MSFT >> 00000097) >> ACPI: FACP 00000000bf7a0290 000F4 (v04 022510 FACP1918 20100225 MSFT >> 00000097) >> ACPI: DSDT 00000000bf7a05f0 06C55 (v02 10605 10605000 00000000 INTL >> 20051117) >> ACPI: FACS 00000000bf7ae000 00040 >> ACPI: APIC 00000000bf7a0390 00092 (v02 022510 APIC1918 20100225 MSFT >> 00000097) >> ACPI: MCFG 00000000bf7a0430 0003C (v01 022510 OEMMCFG 20100225 MSFT >> 00000097) >> ACPI: OEMB 00000000bf7ae040 00073 (v01 022510 OEMB1918 20100225 MSFT >> 00000097) >> ACPI: HPET 00000000bf7aa5f0 00038 (v01 022510 OEMHPET 20100225 MSFT >> 00000097) >> ACPI: GSCI 00000000bf7ae0c0 02024 (v01 022510 GMCHSCI 20100225 MSFT >> 00000097) >> ACPI: 00000000bf7b00f0 00090 (v01 AMI OEMDMAR 00000001 MSFT >> 00000097) >> ACPI: SSDT 00000000bf7b1580 00363 (v01 DpgPmm CpuPm 00000012 INTL >> 20051117) >> ACPI: EINJ 00000000bf7aa630 00130 (v01 AMIER AMI_EINJ 20100225 MSFT >> 00000097) >> ACPI: BERT 00000000bf7aa7c0 00030 (v01 AMIER AMI_BERT 20100225 MSFT >> 00000097) >> ACPI: ERST 00000000bf7aa7f0 001B0 (v01 AMIER AMI_ERST 20100225 MSFT >> 00000097) >> ACPI: HEST 00000000bf7aa9a0 000A8 (v01 AMIER ABC_HEST 20100225 MSFT >> 00000097) >> ACPI: Local APIC address 0xfee00000 >> No NUMA configuration found >> Faking a node at 0000000000000000-00000000bf790000 >> Bootmem setup node 0 0000000000000000-00000000bf790000 >> NODE_DATA [0000000000001000 - 0000000000005fff] >> bootmap [0000000000008000 - 000000000001fef7] pages 18 >> (8 early reservations) ==> bootmem [0000000000 - 00bf790000] >> #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - >> 0000001000] >> #1 [0003309000 - 0003326000] XEN PAGETABLES ==> [0003309000 - >> 0003326000] >> #2 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - >> 0000008000] >> #3 [0001000000 - 000216a048] TEXT DATA BSS ==> [0001000000 - >> 000216a048] >> #4 [000218b000 - 0002b69800] RAMDISK ==> [000218b000 - >> 0002b69800] >> #5 [0002b6a000 - 0003309000] XEN START INFO ==> [0002b6a000 - >> 0003309000] >> #6 [000216b000 - 000216b21b] BRK ==> [000216b000 - >> 000216b21b] >> #7 [0000100000 - 00006e0000] PGTABLE ==> [0000100000 - >> 00006e0000] >> found SMP MP-table at [ffff8800000ff780] ff780 >> Zone PFN ranges: >> DMA 0x00000000 -> 0x00001000 >> DMA32 0x00001000 -> 0x00100000 >> Normal 0x00100000 -> 0x00100000 >> Movable zone start PFN for each node >> early_node_map[2] active PFN ranges >> 0: 0x00000000 -> 0x0000009d >> 0: 0x00000100 -> 0x000bf790 >> On node 0 totalpages: 784173 >> DMA zone: 88 pages used for memmap >> DMA zone: 1507 pages reserved >> DMA zone: 2402 pages, LIFO batch:0 >> DMA32 zone: 16762 pages used for memmap >> DMA32 zone: 763414 pages, LIFO batch:31 >> ACPI: PM-Timer IO Port: 0x808 >> ACPI: Local APIC address 0xfee00000 >> ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) >> ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) >> ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled) >> ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled) >> ACPI: LAPIC (acpi_id[0x05] lapic_id[0x84] disabled) >> ACPI: LAPIC (acpi_id[0x06] lapic_id[0x85] disabled) >> ACPI: LAPIC (acpi_id[0x07] lapic_id[0x86] disabled) >> ACPI: LAPIC (acpi_id[0x08] lapic_id[0x87] disabled) >> ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) >> ACPI: IOAPIC (id[0x07] address[0xfec00000] gsi_base[0]) >> IOAPIC[0]: apic_id 7, version 0, address 0xfec00000, GSI 0-0 >> ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) >> ERROR: Unable to locate IOAPIC for GSI 2 >> ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) >> ERROR: Unable to locate IOAPIC for GSI 9 >> Using ACPI (MADT) for SMP configuration information >> ACPI: HPET id: 0x8086a701 base: 0xfed00000 >> SMP: Allowing 4 CPUs, 0 hotplug CPUs >> nr_irqs_gsi: 256 >> PM: Registered nosave memory: 000000000009d000 - 000000000009e000 >> PM: Registered nosave memory: 000000000009e000 - 0000000000100000 >> Allocating PCI resources starting at c0000000 (gap: c0000000:20000000) >> Booting paravirtualized kernel on Xen >> Xen version: 4.1-unstable (preserve-AD) (dom0) >> NR_CPUS:16 nr_cpumask_bits:16 nr_cpu_ids:4 nr_node_ids:1 >> PERCPU: Embedded 28 pages/cpu @ffff88000336d000 s83096 r8192 d23400 >> u114688 >> pcpu-alloc: s83096 r8192 d23400 u114688 alloc=28*4096 >> pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 >> trying to map vcpu_info 0 at ffff880003378020, mfn 13b378, offset 32 >> cpu 0 using vcpu_info at ffff880003378020 >> trying to map vcpu_info 1 at ffff880003394020, mfn 13b394, offset 32 >> cpu 1 using vcpu_info at ffff880003394020 >> trying to map vcpu_info 2 at ffff8800033b0020, mfn 13b3b0, offset 32 >> cpu 2 using vcpu_info at ffff8800033b0020 >> trying to map vcpu_info 3 at ffff8800033cc020, mfn 13b3cc, offset 32 >> cpu 3 using vcpu_info at ffff8800033cc020 >> Xen: using vcpu_info placement >> Built 1 zonelists in Node order, mobility grouping on. Total pages: >> 765816 >> Policy zone: DMA32 >> Kernel command line: ro root=/dev/mapper/vg_lilith--raid-root >> LANG=en_US.UTF-8 SYSFONT=latarcyrheb-sun16 KEYBOARDTYPE=pc >> KEYTABLE=us ignore_loglevel earlyprintk=xen console=hvc0 rdshell >> pcie_aspm=off >> PCIe ASPM is disabled >> PID hash table entries: 4096 (order: 3, 32768 bytes) >> Initializing CPU#0 >> DMA: Placing 64MB software IO TLB between ffff88000794a000 - >> ffff88000b94a000 >> DMA: software IO TLB at phys 0x794a000 - 0xb94a000 >> xen_swiotlb_fixup: buf=ffff88000794a000 size=67108864 >> xen_swiotlb_fixup: buf=ffff88000b9aa000 size=32768 >> Memory: 2960308k/3137088k available (4691k kernel code, 396k absent, >> 176384k reserved, 2987k data, 656k init) >> Hierarchical RCU implementation. >> NR_IRQS:4352 nr_irqs:1280 >> xen: --> irq=0 >> xen: --> irq=1 >> xen: --> irq=2 >> xen: --> irq=3 >> xen: --> irq=4 >> xen: --> irq=5 >> xen: --> irq=6 >> xen: --> irq=7 >> xen: --> irq=8 >> xen: --> irq=9 >> xen: --> irq=10 >> xen: --> irq=11 >> xen: --> irq=12 >> xen: --> irq=13 >> xen: --> irq=14 >> xen: --> irq=15 >> ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) >> ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) >> xen: sci override: source_irq=9 global_irq=9 trigger=c polarity=1 >> xen: registering gsi 9 triggering 0 polarity 0 >> xen_allocate_pirq: returning irq 9 for gsi 9 >> xen: --> irq=9 >> xen: acpi sci 9 >> Console: colour VGA+ 80x25 >> console [hvc0] enabled, bootconsole disabled >> console [hvc0] enabled, bootconsole disabled >> Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar >> ... MAX_LOCKDEP_SUBCLASSES: 8 >> ... MAX_LOCK_DEPTH: 48 >> ... MAX_LOCKDEP_KEYS: 8191 >> ... CLASSHASH_SIZE: 4096 >> ... MAX_LOCKDEP_ENTRIES: 16384 >> ... MAX_LOCKDEP_CHAINS: 32768 >> ... CHAINHASH_SIZE: 16384 >> memory used by lock dependency info: 5855 kB >> per task-struct memory footprint: 1920 bytes >> Xen: using vcpuop timer interface >> installing Xen timer for CPU 0 >> alloc irq_desc for 1279 on node 0 >> alloc kstat_irqs on node 0 >> Detected 2400.066 MHz processor. >> Calibrating delay loop (skipped), value calculated using timer >> frequency.. 4800.13 BogoMIPS (lpj=2400066) >> Security Framework initialized >> SELinux: Initializing. >> SELinux: Starting in permissive mode >> Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) >> Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) >> Mount-cache hash table entries: 256 >> Initializing cgroup subsys ns >> Initializing cgroup subsys cpuacct >> CPU: L1 I cache: 32K, L1 D cache: 32K >> CPU: L2 cache: 256K >> CPU: L3 cache: 8192K >> CPU 0/0x0 -> Node 0 >> CPU: Unsupported number of siblings 16 >> Performance Events: unsupported p6 CPU model 30 no PMU driver, >> software events only. >> lockdep: fixing up alternatives. >> SMP alternatives: switching to UP code >> ACPI: Core revision 20090903 >> alloc irq_desc for 1278 on node 0 >> alloc kstat_irqs on node 0 >> cpu 0 spinlock event irq 1278 >> alloc irq_desc for 1277 on node 0 >> alloc kstat_irqs on node 0 >> alloc irq_desc for 1276 on node 0 >> alloc kstat_irqs on node 0 >> alloc irq_desc for 1275 on node 0 >> alloc kstat_irqs on node 0 >> alloc irq_desc for 1274 on node 0 >> alloc kstat_irqs on node 0 >> installing Xen timer for CPU 1 >> alloc irq_desc for 1273 on node 0 >> alloc kstat_irqs on node 0 >> alloc irq_desc for 1272 on node 0 >> alloc kstat_irqs on node 0 >> cpu 1 spinlock event irq 1272 >> lockdep: fixing up alternatives. >> SMP alternatives: switching to SMP code >> alloc irq_desc for 1271 on node 0 >> alloc kstat_irqs on node 0 >> alloc irq_desc for 1270 on node 0 >> alloc kstat_irqs on node 0 >> alloc irq_desc for 1269 on node 0 >> alloc kstat_irqs on node 0 >> alloc irq_desc for 1268 on node 0 >> alloc kstat_irqs on node 0 >> Initializing CPU#1 >> CPU: L1 I cache: 32K, L1 D cache: 32K >> CPU: L2 cache: 256K >> CPU: L3 cache: 8192K >> CPU 1/0x0 -> Node 0 >> CPU: Unsupported number of siblings 16 >> installing Xen timer for CPU 2 >> alloc irq_desc for 1267 on node 0 >> alloc kstat_irqs on node 0 >> alloc irq_desc for 1266 on node 0 >> alloc kstat_irqs on node 0 >> cpu 2 spinlock event irq 1266 >> alloc irq_desc for 1265 on node 0 >> alloc kstat_irqs on node 0 >> alloc irq_desc for 1264 on node 0 >> alloc kstat_irqs on node 0 >> alloc irq_desc for 1263 on node 0 >> alloc kstat_irqs on node 0 >> alloc irq_desc for 1262 on node 0 >> alloc kstat_irqs on node 0 >> Initializing CPU#2 >> CPU: L1 I cache: 32K, L1 D cache: 32K >> CPU: L2 cache: 256K >> CPU: L3 cache: 8192K >> CPU 2/0x0 -> Node 0 >> CPU: Unsupported number of siblings 16 >> installing Xen timer for CPU 3 >> alloc irq_desc for 1261 on node 0 >> alloc kstat_irqs on node 0 >> alloc irq_desc for 1260 on node 0 >> alloc kstat_irqs on node 0 >> cpu 3 spinlock event irq 1260 >> alloc irq_desc for 1259 on node 0 >> alloc kstat_irqs on node 0 >> alloc irq_desc for 1258 on node 0 >> alloc kstat_irqs on node 0 >> alloc irq_desc for 1257 on node 0 >> alloc kstat_irqs on node 0 >> alloc irq_desc for 1256 on node 0 >> alloc kstat_irqs on node 0 >> Initializing CPU#3 >> CPU: L1 I cache: 32K, L1 D cache: 32K >> CPU: L2 cache: 256K >> CPU: L3 cache: 8192K >> CPU 3/0x0 -> Node 0 >> CPU: Unsupported number of siblings 16 >> Brought up 4 CPUs >> Grant table initialized >> Time: 16:42:50 Date: 04/07/10 >> NET: Registered protocol family 16 >> alloc irq_desc for 1255 on node 0 >> alloc kstat_irqs on node 0 >> ACPI: bus type pci registered >> PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 >> PCI: MCFG area at e0000000 reserved in E820 >> PCI: Using MMCONFIG at e0000000 - efffffff >> PCI: Using configuration type 1 for base access >> bio: create slab<bio-0> at 0 >> ERROR: Unable to locate IOAPIC for GSI 9 >> ACPI: EC: Look up EC in DSDT >> ACPI Warning for \_SB_._OSC: Return type mismatch - found Integer, >> expected Buffer (20090903/nspredef-1006) >> \_SB_:_OSC evaluation returned wrong type >> _OSC request data:1 6 >> ACPI: Executed 1 blocks of module-level executable AML code >> ACPI: Interpreter enabled >> ACPI: (supports S0 S1 S4 S5) >> ACPI: Using IOAPIC for interrupt routing >> ACPI Warning: Incorrect checksum in table [OEMB] - 91, should be 8E >> (20090903/tbutils-314) >> ACPI Warning: Incorrect checksum in table [ ] - 7B, should be BF >> (20090903/tbutils-314) >> ACPI: No dock devices found. >> ACPI: PCI Root Bridge [PCI0] (0000:00) >> pci 0000:00:03.0: PME# supported from D0 D3hot D3cold >> pci 0000:00:03.0: PME# disabled >> pci 0000:00:05.0: PME# supported from D0 D3hot D3cold >> pci 0000:00:05.0: PME# disabled >> pci 0000:00:1a.0: reg 10 32bit mmio: [0xfb3fc000-0xfb3fc3ff] >> pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold >> pci 0000:00:1a.0: PME# disabled >> pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold >> pci 0000:00:1c.0: PME# disabled >> pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold >> pci 0000:00:1c.4: PME# disabled >> pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold >> pci 0000:00:1c.5: PME# disabled >> pci 0000:00:1d.0: reg 10 32bit mmio: [0xfb3fa000-0xfb3fa3ff] >> pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold >> pci 0000:00:1d.0: PME# disabled >> pci 0000:00:1f.2: reg 10 io port: [0xb400-0xb407] >> pci 0000:00:1f.2: reg 14 io port: [0xbc00-0xbc03] >> pci 0000:00:1f.2: reg 18 io port: [0xb880-0xb887] >> pci 0000:00:1f.2: reg 1c io port: [0xb800-0xb803] >> pci 0000:00:1f.2: reg 20 io port: [0xb480-0xb49f] >> pci 0000:00:1f.2: reg 24 32bit mmio: [0xfb3f8000-0xfb3f87ff] >> pci 0000:00:1f.2: PME# supported from D3hot >> pci 0000:00:1f.2: PME# disabled >> pci 0000:00:1f.3: reg 10 64bit mmio: [0xfb3f6000-0xfb3f60ff] >> pci 0000:00:1f.3: reg 20 io port: [0x400-0x41f] >> pci 0000:03:00.0: reg 10 32bit mmio: [0xfb420000-0xfb43ffff] >> pci 0000:03:00.0: reg 14 32bit mmio: [0xfb480000-0xfb4fffff] >> pci 0000:03:00.0: reg 18 io port: [0xcc00-0xcc1f] >> pci 0000:03:00.0: reg 1c 32bit mmio: [0xfb41c000-0xfb41ffff] >> pci 0000:03:00.0: reg 30 32bit mmio pref: [0xfb440000-0xfb47ffff] >> pci 0000:03:00.0: PME# supported from D0 D3hot D3cold >> pci 0000:03:00.0: PME# disabled >> pci 0000:00:1c.0: bridge io port: [0xc000-0xcfff] >> pci 0000:00:1c.0: bridge 32bit mmio: [0xfb400000-0xfb4fffff] >> pci 0000:04:00.0: reg 10 32bit mmio: [0xfb5e0000-0xfb5fffff] >> pci 0000:04:00.0: reg 18 io port: [0xdc00-0xdc1f] >> pci 0000:04:00.0: reg 1c 32bit mmio: [0xfb5dc000-0xfb5dffff] >> pci 0000:04:00.0: PME# supported from D0 D3hot D3cold >> pci 0000:04:00.0: PME# disabled >> pci 0000:00:1c.4: bridge io port: [0xd000-0xdfff] >> pci 0000:00:1c.4: bridge 32bit mmio: [0xfb500000-0xfb5fffff] >> pci 0000:05:00.0: reg 10 32bit mmio: [0xfb6e0000-0xfb6fffff] >> pci 0000:05:00.0: reg 18 io port: [0xec00-0xec1f] >> pci 0000:05:00.0: reg 1c 32bit mmio: [0xfb6dc000-0xfb6dffff] >> pci 0000:05:00.0: PME# supported from D0 D3hot D3cold >> pci 0000:05:00.0: PME# disabled >> pci 0000:00:1c.5: bridge io port: [0xe000-0xefff] >> pci 0000:00:1c.5: bridge 32bit mmio: [0xfb600000-0xfb6fffff] >> pci 0000:06:03.0: reg 10 32bit mmio pref: [0xfa000000-0xfaffffff] >> pci 0000:06:03.0: reg 14 32bit mmio: [0xfb7fc000-0xfb7fffff] >> pci 0000:06:03.0: reg 18 32bit mmio: [0xfb800000-0xfbffffff] >> pci 0000:00:1e.0: transparent bridge >> pci 0000:00:1e.0: bridge 32bit mmio: [0xfb700000-0xfbffffff] >> pci 0000:00:1e.0: bridge 64bit mmio pref: [0xfa000000-0xfaffffff] >> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] >> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3._PRT] >> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT] >> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR1E._PRT] >> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR20._PRT] >> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR24._PRT] >> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR25._PRT] >> (XEN) PCI add device 00:00.0 >> (XEN) PCI add device 00:03.0 >> (XEN) PCI add device 00:05.0 >> (XEN) PCI add device 00:08.0 >> (XEN) PCI add device 00:08.1 >> (XEN) PCI add device 00:08.2 >> (XEN) PCI add device 00:08.3 >> (XEN) PCI add device 00:10.0 >> (XEN) PCI add device 00:10.1 >> (XEN) PCI add device 00:1a.0 >> (XEN) PCI add device 00:1c.0 >> (XEN) PCI add device 00:1c.4 >> (XEN) PCI add device 00:1c.5 >> (XEN) PCI add device 00:1d.0 >> (XEN) PCI add device 00:1e.0 >> (XEN) PCI add device 00:1f.0 >> (XEN) PCI add device 00:1f.2 >> (XEN) PCI add device 00:1f.3 >> (XEN) PCI add device 03:00.0 >> (XEN) PCI add device 04:00.0 >> (XEN) PCI add device 05:00.0 >> (XEN) PCI add device 06:03.0 >> ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12 14 15) >> ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 6 7 10 *11 12 14 15) >> ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 *10 11 12 14 15) >> ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12 *14 15) >> ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12 14 15) *0, >> disabled. >> ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 *7 10 11 12 14 15) >> ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 6 7 10 11 12 14 15) *0, >> disabled. >> ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 6 7 10 11 12 14 *15) >> sync cpu 0 get result 1 max_id 3 >> sync cpu 1 get result 1 max_id 3 >> sync cpu 2 get result 1 max_id 3 >> sync cpu 3 get result 1 max_id 3 >> alloc irq_desc for 1254 on node 0 >> alloc kstat_irqs on node 0 >> xen_balloon: Initialising balloon driver with page order 0. >> vgaarb: device added: >> PCI:0000:06:03.0,decodes=io+mem,owns=io+mem,locks=none >> vgaarb: loaded >> SCSI subsystem initialized >> libata version 3.00 loaded. >> usbcore: registered new interface driver usbfs >> usbcore: registered new interface driver hub >> usbcore: registered new device driver usb >> PCI: Using ACPI for IRQ routing >> NetLabel: Initializing >> NetLabel: domain hash size = 128 >> NetLabel: protocols = UNLABELED CIPSOv4 >> NetLabel: unlabeled traffic allowed by default >> Switching to clocksource xen >> pnp: PnP ACPI init >> ACPI: bus type pnp registered >> xen: registering gsi 8 triggering 1 polarity 0 >> xen_allocate_pirq: returning irq 8 for gsi 8 >> xen:scsi0 : ahci >> scsi1 : ahci >> scsi2 : ahci >> scsi3 : ahci >> scsi4 : ahci >> scsi5 : ahci >> ata1: SATA max UDMA/133 abar m2048@0xfb3f8000 port 0xfb3f8100 irq 1247 >> ata2: SATA max UDMA/133 abar m2048@0xfb3f8000 port 0xfb3f8180 irq 1247 >> ata3: SATA max UDMA/133 abar m2048@0xfb3f8000 port 0xfb3f8200 irq 1247 >> ata4: SATA max UDMA/133 abar m2048@0xfb3f8000 port 0xfb3f8280 irq 1247 >> ata5: SATA max UDMA/133 abar m2048@0xfb3f8000 port 0xfb3f8300 irq 1247 >> ata6: SATA max UDMA/133 abar m2048@0xfb3f8000 port 0xfb3f8380 irq 1247 >> usb 1-1: udev 2, busnum 1, minor = 1 >> usb 1-1: New USB device found, idVendor=8087, idProduct=0020 >> usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 >> usb 1-1: usb_probe_device >> usb 1-1: configuration #1 chosen from 1 choice >> usb 1-1: adding 1-1:1.0 (config #1, interface 0) >> hub 1-1:1.0: usb_probe_interface >> hub 1-1:1.0: usb_probe_interface - got id >> hub 1-1:1.0: USB hub found >> hub 1-1:1.0: 6 ports detected >> hub 1-1:1.0: standalone hub >> hub 1-1:1.0: individual port power switching >> hub 1-1:1.0: individual port over-current protection >> hub 1-1:1.0: Single TT >> hub 1-1:1.0: TT requires at most 8 FS bit times (666 ns) >> hub 1-1:1.0: Port indicators are supported >> hub 1-1:1.0: power on to power good time: 100ms >> hub 1-1:1.0: local power source is good >> hub 1-1:1.0: enabling power on all ports >> hub 2-0:1.0: state 7 ports 2 chg 0002 evt 0000 >> hub 2-0:1.0: port 1, status 0501, change 0000, 480 Mb/s >> ehci_hcd 0000:00:1d.0: port 1 high speed >> ehci_hcd 0000:00:1d.0: GetStatus port 1 status 001005 POWER sig=se0 >> PE CONNECT >> hub 1-1:1.0: port 2: status 0101 change 0001 >> usb 2-1: new high speed USB device using ehci_hcd and address 2 >> ehci_hcd 0000:00:1d.0: port 1 high speed >> ehci_hcd 0000:00:1d.0: GetStatus port 1 status 001005 POWER sig=se0 >> PE CONNECT >> usb 1-1: link qh256-0001/ffff8800bcd9ab40 start 1 [1/0 us] >> usb 2-1: udev 2, busnum 2, minor = 129 >> usb 2-1: New USB device found, idVendor=8087, idProduct=0020 >> usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 >> usb 2-1: usb_probe_device >> usb 2-1: configuration #1 chosen from 1 choice >> usb 2-1: adding 2-1:1.0 (config #1, interface 0) >> hub 2-1:1.0: usb_probe_interface >> hub 2-1:1.0: usb_probe_interface - got id >> hub 2-1:1.0: USB hub found >> hub 2-1:1.0: 8 ports detected >> hub 2-1:1.0: standalone hub >> hub 2-1:1.0: individual port power switching >> hub 2-1:1.0: individual port over-current protection >> hub 2-1:1.0: Single TT >> hub 2-1:1.0: TT requires at most 8 FS bit times (666 ns) >> hub 2-1:1.0: Port indicators are supported >> hub 2-1:1.0: power on to power good time: 100ms >> hub 2-1:1.0: local power source is good >> hub 2-1:1.0: enabling power on all ports >> hub 1-1:1.0: state 7 ports 6 chg 0004 evt 0000 >> hub 1-1:1.0: port 2, status 0101, change 0000, 12 Mb/s >> usb 1-1.2: new full speed USB device using ehci_hcd and address 3 >> hub 1-1:1.0: port 2 not reset yet, waiting 10ms >> ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) >> ata1.00: ATA-8: WDC WD10EADS-00P8B0, 01.00A01, max UDMA/133 >> ata1.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA >> ata1.00: configured for UDMA/133 >> scsi 0:0:0:0: Direct-Access ATA WDC WD10EADS-00P 01.0 PQ: 0 >> ANSI: 5 >> sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) >> sd 0:0:0:0: [sda] Write Protect is off >> sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 >> sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't >> support DPO or FUA >> sd 0:0:0:0: Attached scsi generic sg0 type 0 >> sda: >> usb 2-1: link qh256-0001/ffff8800be450cc0 start 1 [1/0 us] >> sda1 sda2 sda3 sda4 >> sd 0:0:0:0: [sda] Attached SCSI disk >> usb 1-1.2: skipped 1 descriptor after interface >> usb 1-1.2: skipped 1 descriptor after interface >> usb 1-1.2: default language 0x0409 >> usb 1-1.2: udev 3, busnum 1, minor = 2 >> usb 1-1.2: New USB device found, idVendor=0557, idProduct=2221 >> usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 >> usb 1-1.2: Product: Hermon USB hidmouse Device >> usb 1-1.2: Manufacturer: Winbond Electronics Corp >> usb 1-1.2: usb_probe_device >> usb 1-1.2: configuration #1 chosen from 1 choice >> usb 1-1.2: adding 1-1.2:1.0 (config #1, interface 0) >> usbhid 1-1.2:1.0: usb_probe_interface >> usbhid 1-1.2:1.0: usb_probe_interface - got id >> input: Winbond Electronics Corp Hermon USB hidmouse Device as >> /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input4 >> generic-usb 0003:0557:2221.0001: input,hidraw0: USB HID v1.00 Mouse >> [Winbond Electronics Corp Hermon USB hidmouse Device] on >> usb-0000:00:1a.0-1.2/input0 >> usb 1-1.2: adding 1-1.2:1.1 (config #1, interface 1) >> usbhid 1-1.2:1.1: usb_probe_interface >> usbhid 1-1.2:1.1: usb_probe_interface - got id >> input: Winbond Electronics Corp Hermon USB hidmouse Device as >> /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.1/input/input5 >> usb 1-1.2: link qh8-0601/ffff8800bc52e440 start 2 [1/2 us] >> generic-usb 0003:0557:2221.0002: input,hidraw1: USB HID v1.00 >> Keyboard [Winbond Electronics Corp Hermon USB hidmouse Device] on >> usb-0000:00:1a.0-1.2/input1 >> hub 2-1:1.0: state 7 ports 8 chg 0000 evt 0000 >> hub 1-1:1.0: state 7 ports 6 chg 0000 evt 0004 >> ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) >> ata2.00: ATA-7: SAMSUNG HD103SI, 1AG01118, max UDMA7 >> ata2.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA >> ata2.00: configured for UDMA/133 >> scsi 1:0:0:0: Direct-Access ATA SAMSUNG HD103SI 1AG0 PQ: 0 >> ANSI: 5 >> sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) >> sd 1:0:0:0: Attached scsi generic sg1 type 0 >> sd 1:0:0:0: [sdb] Write Protect is off >> sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 >> sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't >> support DPO or FUA >> sdb: sdb1 sdb2 sdb3 sdb4 >> sd 1:0:0:0: [sdb] Attached SCSI disk >> input: ImExPS/2 Generic Explorer Mouse as >> /devices/platform/i8042/serio1/input/input6 >> ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) >> ata3.00: ATA-8: WDC WD10EADS-00P8B0, 01.00A01, max UDMA/133 >> ata3.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA >> ata3.00: configured for UDMA/133 >> scsi 2:0:0:0: Direct-Access ATA WDC WD10EADS-00P 01.0 PQ: 0 >> ANSI: 5 >> sd 2:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) >> sd 2:0:0:0: Attached scsi generic sg2 type 0 >> sd 2:0:0:0: [sdc] Write Protect is off >> sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 >> sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't >> support DPO or FUA >> sdc: sdc1 sdc2 sdc3 sdc4 >> sd 2:0:0:0: [sdc] Attached SCSI disk >> hub 2-1:1.0: hub_suspend >> usb 2-1: unlink qh256-0001/ffff8800be450cc0 start 1 [1/0 us] >> usb 2-1: usb auto-suspend >> ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) >> ata4.00: ATA-7: SAMSUNG HD103SI, 1AG01118, max UDMA7 >> ata4.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA >> ata4.00: configured for UDMA/133 >> scsi 3:0:0:0: Direct-Access ATA SAMSUNG HD103SI 1AG0 PQ: 0 >> ANSI: 5 >> sd 3:0:0:0: [sdd] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) >> sd 3:0:0:0: Attached scsi generic sg3 type 0 >> sd 3:0:0:0: [sdd] Write Protect is off >> sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00 >> sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't >> support DPO or FUA >> sdd: sdd1 sdd2 sdd3 sdd4 >> sd 3:0:0:0: [sdd] Attached SCSI disk >> ata5: SATA link down (SStatus 0 SControl 300) >> ata6: SATA link down (SStatus 0 SControl 300) >> md: raid10 personality registered for level 10 >> Intel AES-NI instructions are not detected. >> md: md0 stopped. >> md: bind<sdb3> >> md: bind<sdc3> >> md: bind<sdd3> >> md: bind<sda3> >> raid10: md0 is not clean -- starting background reconstruction >> raid10: raid set md0 active with 4 out of 4 devices >> md0: detected capacity change from 0 to 838860668928 >> md: resync of RAID array md0 >> md: minimum _guaranteed_ speed: 1000 KB/sec/disk. >> md: using maximum available idle IO bandwidth (but not more than >> 200000 KB/sec) for resync. >> md: using 128k window, over a total of 819199872 blocks. >> (XEN) [VT-D]iommu.c:821: iommu_fault_status: Primary Pending Fault >> (XEN) [VT-D]iommu.c:796: DMAR:[DMA Write] Request device [00:1f.2] >> fault addr bf579000, iommu reg = ffff82c3fff57000 >> (XEN) DMAR:[fault reason 05h] PTE Write access is not set >> (XEN) print_vtd_entries: iommu = ffff83013fff3e80 bdf = 0:1f.2 gmfn = >> bf579 >> (XEN) root_entry = ffff83013ff36000 >> (XEN) root_entry[0] = 13c6bb001 >> (XEN) context = ffff83013c6bb000 >> (XEN) context[fa] = 2_13fec4001 >> (XEN) l4 = ffff83013fec4000 >> (XEN) l4_index = 0 >> (XEN) l4[0] = 13fec1003 >> (XEN) l3 = ffff83013fec1000 >> (XEN) l3_index = 2 >> (XEN) l3[2] = 13ccbe003 >> (XEN) l2 = ffff83013ccbe000 >> (XEN) l2_index = 1fa >> (XEN) l2[1fa] = 13cac3003 >> (XEN) l1 = ffff83013cac3000 >> (XEN) l1_index = 179 >> (XEN) l1[179] = 0 >> (XEN) l1[179] not present >> (XEN) [VT-D]iommu.c:796: DMAR:[DMA Write] Request device [00:1f.2] >> fault addr bf579000, iommu reg = ffff82c3fff57000 >> (XEN) DMAR:[fault reason 05h] PTE Write access is not set >> (XEN) print_vtd_entries: iommu = ffff83013fff3e80 bdf = 0:1f.2 gmfn = >> bf579 >> (XEN) root_entry = ffff83013ff36000 >> (XEN) root_entry[0] = 13c6bb001 >> (XEN) context = ffff83013c6bb000 >> (XEN) context[fa] = 2_13fec4001 >> (XEN) l4 = ffff83013fec4000 >> (XEN) l4_index = 0 >> (XEN) l4[0] = 13fec1003 >> (XEN) l3 = ffff83013fec1000 >> (XEN) l3_index = 2 >> (XEN) l3[2] = 13ccbe003 >> (XEN) l2 = ffff83013ccbe000 >> (XEN) l2_index = 1fa >> (XEN) l2[1fa] = 13cac3003 >> (XEN) l1 = ffff83013cac3000 >> (XEN) l1_index = 179 >> (XEN) l1[179] = 0 >> (XEN) l1[179] not present >> (XEN) [VT-D]iommu.c:796: DMAR:[DMA Write] Request device [00:1f.2] >> fault addr bf578000, iommu reg = ffff82c3fff57000 >> (XEN) DMAR:[fault reason 05h] PTE Write access is not set >> (XEN) print_vtd_entries: iommu = ffff83013fff3e80 bdf = 0:1f.2 gmfn = >> bf578 >> (XEN) root_entry = ffff83013ff36000 >> (XEN) root_entry[0] = 13c6bb001 >> (XEN) context = ffff83013c6bb000 >> (XEN) context[fa] = 2_13fec4001 >> (XEN) l4 = ffff83013fec4000 >> (XEN) l4_index = 0 >> (XEN) l4[0] = 13fec1003 >> (XEN) l3 = ffff83013fec1000 >> (XEN) l3_index = 2 >> (XEN) l3[2] = 13ccbe003 >> (XEN) l2 = ffff83013ccbe000 >> (XEN) l2_index = 1fa >> (XEN) l2[1fa] = 13cac3003 >> (XEN) l1 = ffff83013cac3000 >> (XEN) l1_index = 178 >> (XEN) l1[178] = 0 >> (XEN) l1[178] not present >> (XEN) [VT-D]iommu.c:796: DMAR:[DMA Write] Request device [00:1f.2] >> fault addr bf578000, iommu reg = ffff82c3fff57000 >> (XEN) DMAR:[fault reason 05h] PTE Write access is not set >> (XEN) print_vtd_entries: iommu = ffff83013fff3e80 bdf = 0:1f.2 gmfn = >> bf578 >> (XEN) root_entry = ffff83013ff36000 >> (XEN) root_entry[0] = 13c6bb001 >> (XEN) context = ffff83013c6bb000 >> (XEN) context[fa] = 2_13fec4001 >> (XEN) l4 = ffff83013fec4000 >> (XEN) l4_index = 0 >> (XEN) l4[0] = 13fec1003 >> (XEN) l3 = ffff83013fec1000 >> (XEN) l3_index = 2 >> (XEN) l3[2] = 13ccbe003 >> (XEN) l2 = ffff83013ccbe000 >> (XEN) l2_index = 1fa >> (XEN) l2[1fa] = 13cac3003 >> (XEN) l1 = ffff83013cac3000 >> (XEN) l1_index = 178 >> (XEN) l1[178] = 0 >> (XEN) l1[178] not present >> (XEN) [VT-D]iommu.c:821: iommu_fault_status: Primary Pending Fault >> (XEN) [VT-D]iommu.c:796: DMAR:[DMA Write] Request device [00:1f.2] >> fault addr bf57b000, iommu reg = ffff82c3fff57000 >> (XEN) DMAR:[fault reason 05h] PTE Write access is not set >> (XEN) print_vtd_entries: iommu = ffff83013fff3e80 bdf = 0:1f.2 gmfn = >> bf57b >> (XEN) root_entry = ffff83013ff36000 >> (XEN) root_entry[0] = 13c6bb001 >> (XEN) context = ffff83013c6bb000 >> (XEN) context[fa] = 2_13fec4001 >> (XEN) l4 = ffff83013fec4000 >> (XEN) l4_index = 0 >> (XEN) l4[0] = 13fec1003 >> (XEN) l3 = ffff83013fec1000 >> (XEN) l3_index = 2 >> (XEN) l3[2] = 13ccbe003 >> (XEN) l2 = ffff83013ccbe000 >> (XEN) l2_index = 1fa >> (XEN) l2[1fa] = 13cac3003 >> (XEN) l1 = ffff83013cac3000 >> (XEN) l1_index = 17b >> (XEN) l1[17b] = 0 >> (XEN) l1[17b] not present >> (XEN) [VT-D]iommu.c:796: DMAR:[DMA Write] Request device [00:1f.2] >> fault addr bf57b000, iommu reg = ffff82c3fff57000 >> (XEN) DMAR:[fault reason 05h] PTE Write access is not set >> (XEN) print_vtd_entries: iommu = ffff83013fff3e80 bdf = 0:1f.2 gmfn = >> bf57b >> (XEN) root_entry = ffff83013ff36000 >> (XEN) root_entry[0] = 13c6bb001 >> (XEN) context = ffff83013c6bb000 >> (XEN) context[fa] = 2_13fec4001 >> (XEN) l4 = ffff83013fec4000 >> (XEN) l4_index = 0 >> (XEN) l4[0] = 13fec1003 >> (XEN) l3 = ffff83013fec1000 >> (XEN) l3_index = 2 >> (XEN) l3[2] = 13ccbe003 >> (XEN) l2 = ffff83013ccbe000 >> (XEN) l2_index = 1fa >> (XEN) l2[1fa] = 13cac3003 >> (XEN) l1 = ffff83013cac3000 >> (XEN) l1_index = 17b >> (XEN) l1[17b] = 0 >> (XEN) l1[17b] not present >> md0:(XEN) [VT-D]iommu.c:821: iommu_fault_status: Primary Pending Fault >> (XEN) [VT-D]iommu.c:796: DMAR:[DMA Read] Request device [00:1f.2] >> fault addr bf57b000, iommu reg = ffff82c3fff57000 >> (XEN) DMAR:[fault reason 06h] PTE Read access is not set >> (XEN) print_vtd_entries: iommu = ffff83013fff3e80 bdf = 0:1f.2 gmfn = >> bf57b >> (XEN) root_entry = ffff83013ff36000 >> (XEN) root_entry[0] = 13c6bb001 >> (XEN) context = ffff83013c6bb000 >> (XEN) context[fa] = 2_13fec4001 >> (XEN) l4 = ffff83013fec4000 >> (XEN) l4_index = 0 >> (XEN) l4[0] = 13fec1003 >> (XEN) l3 = ffff83013fec1000 >> (XEN) l3_index = 2 >> (XEN) l3[2] = 13ccbe003 >> (XEN) l2 = ffff83013ccbe000 >> (XEN) l2_index = 1fa >> (XEN) l2[1fa] = 13cac3003 >> (XEN) l1 = ffff83013cac3000 >> (XEN) l1_index = 17b >> (XEN) l1[17b] = 0 >> (XEN) l1[17b] not present >> >> ata2.00: exception Emask 0x60 SAct 0x1 SErr 0x800 action 0x6 frozen >> ata2.00: irq_stat 0x20000000, host bus error >> ata2: SError: { HostInt } >> ata2.00: failed command: WRITE FPDMA QUEUED >> ata2.00: cmd 61/80:00:c3:aa:a0/00:00:0c:00:00/40 tag 0 ncq 65536 out >> res 40/00:04:c3:aa:a0/00:00:0c:00:00/40 Emask 0x60 (host >> bus error) >> ata2.00: status: { DRDY } >> ata2: hard resetting link >> ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) >> ata2.00: configured for UDMA/133 >> ata2: EH complete >> (XEN) [VT-D]iommu.c:821: iommu_fault_status: Primary Pending Fault >> (XEN) [VT-D]iommu.c:796: DMAR:[DMA Read] Request device [00:1f.2] >> fault addr bf57b000, iommu reg = ffff82c3fff57000 >> (XEN) DMAR:[fault reason 06h] PTE Read access is not set >> (XEN) print_vtd_entries: iommu = ffff83013fff3e80 bdf = 0:1f.2 gmfn = >> bf57b >> (XEN) root_entry = ffff83013ff36000 >> (XEN) root_entry[0] = 13c6bb001 >> (XEN) context = ffff83013c6bb000 >> (XEN) context[fa] = 2_13fec4001 >> (XEN) l4 = ffff83013fec4000 >> (XEN) l4_index = 0 >> (XEN) l4[0] = 13fec1003 >> (XEN) l3 = ffff83013fec1000 >> (XEN) l3_index = 2 >> (XEN) l3[2] = 13ccbe003 >> (XEN) l2 = ffff83013ccbe000 >> (XEN) l2_index = 1fa >> (XEN) l2[1fa] = 13cac3003 >> (XEN) l1 = ffff83013cac3000 >> (XEN) l1_index = 17b >> (XEN) l1[17b] = 0 >> (XEN) l1[17b] not present >> ata2.00: exception Emask 0x60 SAct 0x1 SErr 0x800 action 0x6 frozen >> ata2.00: irq_stat 0x20000000, host bus error >> ata2: SError: { HostInt } >> ata2.00: failed command: WRITE FPDMA QUEUED >> ata2.00: cmd 61/80:00:c3:aa:a0/00:00:0c:00:00/40 tag 0 ncq 65536 out >> res 40/00:04:c3:aa:a0/00:00:0c:00:00/40 Emask 0x60 (host >> bus error) >> ata2.00: status: { DRDY } >> ata2: hard resetting link >> ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) >> ata2.00: configured for UDMA/133 >> ata2: EH complete >> (XEN) [VT-D]iommu.c:821: iommu_fault_status: Primary Pending Fault >> (XEN) [VT-D]iommu.c:796: DMAR:[DMA Read] Request device [00:1f.2] >> fault addr bf57b000, iommu reg = ffff82c3fff57000 >> (XEN) DMAR:[fault reason 06h] PTE Read access is not set >> (XEN) print_vtd_entries: iommu = ffff83013fff3e80 bdf = 0:1f.2 gmfn = >> bf57b >> (XEN) root_entry = ffff83013ff36000 >> (XEN) root_entry[0] = 13c6bb001 >> (XEN) context = ffff83013c6bb000 >> (XEN) context[fa] = 2_13fec4001 >> (XEN) l4 = ffff83013fec4000 >> (XEN) l4_index = 0 >> (XEN) l4[0] = 13fec1003 >> (XEN) l3 = ffff83013fec1000 >> (XEN) l3_index = 2 >> (XEN) l3[2] = 13ccbe003 >> (XEN) l2 = ffff83013ccbe000 >> (XEN) l2_index = 1fa >> (XEN) l2[1fa] = 13cac3003 >> (XEN) l1 = ffff83013cac3000 >> (XEN) l1_index = 17b >> (XEN) l1[17b] = 0 >> (XEN) l1[17b] not present >> ata2.00: exception Emask 0x60 SAct 0x1 SErr 0x800 action 0x6 frozen >> ata2.00: irq_stat 0x20000000, host bus error >> ata2: SError: { HostInt } >> ata2.00: failed command: WRITE FPDMA QUEUED >> ata2.00: cmd 61/80:00:c3:aa:a0/00:00:0c:00:00/40 tag 0 ncq 65536 out >> res 40/00:04:c3:aa:a0/00:00:0c:00:00/40 Emask 0x60 (host >> bus error) >> ata2.00: status: { DRDY } >> ata2: hard resetting link >> ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) >> ata2.00: configured for UDMA/133 >> ata2: EH complete >> (XEN) [VT-D]iommu.c:821: iommu_fault_status: Primary Pending Fault >> (XEN) [VT-D]iommu.c:796: DMAR:[DMA Read] Request device [00:1f.2] >> fault addr bf57b000, iommu reg = ffff82c3fff57000 >> (XEN) DMAR:[fault reason 06h] PTE Read access is not set >> (XEN) print_vtd_entries: iommu = ffff83013fff3e80 bdf = 0:1f.2 gmfn = >> bf57b >> (XEN) root_entry = ffff83013ff36000 >> (XEN) root_entry[0] = 13c6bb001 >> (XEN) context = ffff83013c6bb000 >> (XEN) context[fa] = 2_13fec4001 >> (XEN) l4 = ffff83013fec4000 >> (XEN) l4_index = 0 >> (XEN) l4[0] = 13fec1003 >> (XEN) l3 = ffff83013fec1000 >> (XEN) l3_index = 2 >> (XEN) l3[2] = 13ccbe003 >> (XEN) l2 = ffff83013ccbe000 >> (XEN) l2_index = 1fa >> (XEN) l2[1fa] = 13cac3003 >> (XEN) l1 = ffff83013cac3000 >> (XEN) l1_index = 17b >> (XEN) l1[17b] = 0 >> (XEN) l1[17b] not present >> ata2.00: exception Emask 0x60 SAct 0x1 SErr 0x800 action 0x6 frozen >> ata2.00: irq_stat 0x20000000, host bus error >> ata2: SError: { HostInt } >> ata2.00: failed command: WRITE FPDMA QUEUED >> ata2.00: cmd 61/80:00:c3:aa:a0/00:00:0c:00:00/40 tag 0 ncq 65536 out >> res 40/00:04:c3:aa:a0/00:00:0c:00:00/40 Emask 0x60 (host >> bus error) >> ata2.00: status: { DRDY } >> ata2: hard resetting link >> ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) >> ata2.00: configured for UDMA/133 >> ata2: EH complete >> (XEN) [VT-D]iommu.c:821: iommu_fault_status: Primary Pending Fault >> (XEN) [VT-D]iommu.c:796: DMAR:[DMA Read] Request device [00:1f.2] >> fault addr bf57b000, iommu reg = ffff82c3fff57000 >> (XEN) DMAR:[fault reason 06h] PTE Read access is not set >> (XEN) print_vtd_entries: iommu = ffff83013fff3e80 bdf = 0:1f.2 gmfn = >> bf57b >> (XEN) root_entry = ffff83013ff36000 >> (XEN) root_entry[0] = 13c6bb001 >> (XEN) context = ffff83013c6bb000 >> (XEN) context[fa] = 2_13fec4001 >> (XEN) l4 = ffff83013fec4000 >> (XEN) l4_index = 0 >> (XEN) l4[0] = 13fec1003 >> (XEN) l3 = ffff83013fec1000 >> (XEN) l3_index = 2 >> (XEN) l3[2] = 13ccbe003 >> (XEN) l2 = ffff83013ccbe000 >> (XEN) l2_index = 1fa >> (XEN) l2[1fa] = 13cac3003 >> (XEN) l1 = ffff83013cac3000 >> (XEN) l1_index = 17b >> (XEN) l1[17b] = 0 >> (XEN) l1[17b] not present >> ata2.00: exception Emask 0x60 SAct 0x1 SErr 0x800 action 0x6 frozen >> ata2.00: irq_stat 0x20000000, host bus error >> ata2: SError: { HostInt } >> ata2.00: failed command: WRITE FPDMA QUEUED >> ata2.00: cmd 61/80:00:c3:aa:a0/00:00:0c:00:00/40 tag 0 ncq 65536 out >> res 40/00:04:c3:aa:a0/00:00:0c:00:00/40 Emask 0x60 (host >> bus error) >> ata2.00: status: { DRDY } >> ata2: hard resetting link >> hub 2-0:1.0: hub_suspend >> usb usb2: bus auto-suspend >> ehci_hcd 0000:00:1d.0: suspend root hub >> ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) >> ata2.00: configured for UDMA/133 >> ata2: EH complete >> (XEN) [VT-D]iommu.c:821: iommu_fault_status: Primary Pending Fault >> (XEN) [VT-D]iommu.c:796: DMAR:[DMA Read] Request device [00:1f.2] >> fault addr bf57b000, iommu reg = ffff82c3fff57000 >> (XEN) DMAR:[fault reason 06h] PTE Read access is not set >> (XEN) print_vtd_entries: iommu = ffff83013fff3e80 bdf = 0:1f.2 gmfn = >> bf57b >> (XEN) root_entry = ffff83013ff36000 >> (XEN) root_entry[0] = 13c6bb001 >> (XEN) context = ffff83013c6bb000 >> (XEN) context[fa] = 2_13fec4001 >> (XEN) l4 = ffff83013fec4000 >> (XEN) l4_index = 0 >> (XEN) l4[0] = 13fec1003 >> (XEN) l3 = ffff83013fec1000 >> (XEN) l3_index = 2 >> (XEN) l3[2] = 13ccbe003 >> (XEN) l2 = ffff83013ccbe000 >> (XEN) l2_index = 1fa >> (XEN) l2[1fa] = 13cac3003 >> (XEN) l1 = ffff83013cac3000 >> (XEN) l1_index = 17b >> (XEN) l1[17b] = 0 >> (XEN) l1[17b] not present >> ata2.00: exception Emask 0x60 SAct 0x1 SErr 0x800 action 0x6 frozen >> ata2.00: irq_stat 0x20000000, host bus error >> ata2: SError: { HostInt } >> ata2.00: failed command: WRITE FPDMA QUEUED >> ata2.00: cmd 61/80:00:c3:aa:a0/00:00:0c:00:00/40 tag 0 ncq 65536 out >> res 40/00:04:c3:aa:a0/00:00:0c:00:00/40 Emask 0x60 (host >> bus error) >> ata2.00: status: { DRDY } >> ata2: hard resetting link >> ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) >> ata2.00: configured for UDMA/133 >> sd 1:0:0:0: [sdb] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE >> sd 1:0:0:0: [sdb] Sense Key : Aborted Command [current] [descriptor] >> Descriptor sense data with sense descriptors (in hex): >> 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 >> 0c a0 aa c3 >> sd 1:0:0:0: [sdb] Add. Sense: No additional sense information >> sd 1:0:0:0: [sdb] CDB: Write(10): 2a 00 0c a0 aa c3 00 00 80 00 >> end_request: I/O error, dev sdb, sector 211856067 >> raid10: Disk failure on sdb3, disabling device. >> raid10: Operation continuing on 3 devices. >> ata2: EH complete >> unknown partition table >> md: md0: resync done. >> md: checkpointing resync of md0. >> RAID10 conf printout: >> --- wd:3 rd:4 >> disk 0, wo:0, o:1, dev:sda3 >> disk 1, wo:1, o:0, dev:sdb3 >> disk 2, wo:0, o:1, dev:sdc3 >> disk 3, wo:0, o:1, dev:sdd3 >> RAID10 conf printout: >> --- wd:3 rd:4 >> disk 0, wo:0, o:1, dev:sda3 >> disk 2, wo:0, o:1, dev:sdc3 >> disk 3, wo:0, o:1, dev:sdd3 >> md: resync of RAID array md0 >> md: minimum _guaranteed_ speed: 1000 KB/sec/disk. >> md: using maximum available idle IO bandwidth (but not more than >> 200000 KB/sec) for resync. >> md: using 128k window, over a total of 819199872 blocks. >> md: resuming resync of md0 from checkpoint. >> (XEN) [VT-D]iommu.c:821: iommu_fault_status: Primary Pending Fault >> (XEN) [VT-D]iommu.c:796: DMAR:[DMA Write] Request device [00:1f.2] >> fault addr bf578000, iommu reg = ffff82c3fff57000 >> (XEN) DMAR:[fault reason 05h] PTE Write access is not set >> (XEN) print_vtd_entries: iommu = ffff83013fff3e80 bdf = 0:1f.2 gmfn = >> bf578 >> (XEN) root_entry = ffff83013ff36000 >> (XEN) root_entry[0] = 13c6bb001 >> (XEN) context = ffff83013c6bb000 >> (XEN) context[fa] = 2_13fec4001 >> (XEN) l4 = ffff83013fec4000 >> (XEN) l4_index = 0 >> (XEN) l4[0] = 13fec1003 >> (XEN) l3 = ffff83013fec1000 >> (XEN) l3_index = 2 >> (XEN) l3[2] = 13ccbe003 >> (XEN) l2 = ffff83013ccbe000 >> (XEN) l2_index = 1fa >> (XEN) l2[1fa] = 13cac3003 >> (XEN) l1 = ffff83013cac3000 >> (XEN) l1_index = 178 >> (XEN) l1[178] = 0 >> (XEN) l1[178] not present >> (XEN) [VT-D]iommu.c:796: DMAR:[DMA Write] Request device [00:1f.2] >> fault addr bf579000, iommu reg = ffff82c3fff57000 >> (XEN) DMAR:[fault reason 05h] PTE Write access is not set >> (XEN) print_vtd_entries: iommu = ffff83013fff3e80 bdf = 0:1f.2 gmfn = >> bf579 >> (XEN) root_entry = ffff83013ff36000 >> (XEN) root_entry[0] = 13c6bb001 >> (XEN) context = ffff83013c6bb000 >> (XEN) context[fa] = 2_13fec4001 >> (XEN) l4 = ffff83013fec4000 >> (XEN) l4_index = 0 >> (XEN) l4[0] = 13fec1003 >> (XEN) l3 = ffff83013fec1000 >> (XEN) l3_index = 2 >> (XEN) l3[2] = 13ccbe003 >> (XEN) l2 = ffff83013ccbe000 >> (XEN) l2_index = 1fa >> (XEN) l2[1fa] = 13cac3003 >> (XEN) l1 = ffff83013cac3000 >> (XEN) l1_index = 179 >> (XEN) l1[179] = 0 >> (XEN) l1[179] not present >> (XEN) [VT-D]iommu.c:821: iommu_fault_status: Primary Pending Fault >> (XEN) [VT-D]iommu.c:796: DMAR:[DMA Write] Request device [00:1f.2] >> fault addr bf57b000, iommu reg = ffff82c3fff57000 >> (XEN) DMAR:[fault reason 05h] PTE Write access is not set >> (XEN) print_vtd_entries: iommu = ffff83013fff3e80 bdf = 0:1f.2 gmfn = >> bf57b >> (XEN) root_entry = ffff83013ff36000 >> (XEN) root_entry[0] = 13c6bb001 >> (XEN) context = ffff83013c6bb000 >> (XEN) context[fa] = 2_13fec4001 >> (XEN) l4 = ffff83013fec4000 >> (XEN) l4_index = 0 >> (XEN) l4[0] = 13fec1003 >> (XEN) l3 = ffff83013fec1000 >> (XEN) l3_index = 2 >> (XEN) l3[2] = 13ccbe003 >> (XEN) l2 = ffff83013ccbe000 >> (XEN) l2_index = 1fa >> (XEN) l2[1fa] = 13cac3003 >> (XEN) l1 = ffff83013cac3000 >> (XEN) l1_index = 17b >> (XEN) l1[17b] = 0 >> (XEN) l1[17b] not present >> (XEN) [VT-D]iommu.c:796: DMAR:[DMA Write] Request device [00:1f.2] >> fault addr bf57b000, iommu reg = ffff82c3fff57000 >> (XEN) DMAR:[fault reason 05h] PTE Write access is not set >> (XEN) print_vtd_entries: iommu = ffff83013fff3e80 bdf = 0:1f.2 gmfn = >> bf57b >> (XEN) root_entry = ffff83013ff36000 >> (XEN) root_entry[0] = 13c6bb001 >> (XEN) context = ffff83013c6bb000 >> (XEN) context[fa] = 2_13fec4001 >> (XEN) l4 = ffff83013fec4000 >> (XEN) l4_index = 0 >> (XEN) l4[0] = 13fec1003 >> (XEN) l3 = ffff83013fec1000 >> (XEN) l3_index = 2 >> (XEN) l3[2] = 13ccbe003 >> (XEN) l2 = ffff83013ccbe000 >> (XEN) l2_index = 1fa >> (XEN) l2[1fa] = 13cac3003 >> (XEN) l1 = ffff83013cac3000 >> (XEN) l1_index = 17b >> (XEN) l1[17b] = 0 >> (XEN) l1[17b] not present >> (XEN) [VT-D]iommu.c:821: iommu_fault_status: Primary Pending Fault >> (XEN) [VT-D]iommu.c:796: DMAR:[DMA Read] Request device [00:1f.2] >> fault addr bf57b000, iommu reg = ffff82c3fff57000 >> (XEN) DMAR:[fault reason 06h] PTE Read access is not set >> (XEN) print_vtd_entries: iommu = ffff83013fff3e80 bdf = 0:1f.2 gmfn = >> bf57b >> (XEN) root_entry = ffff83013ff36000 >> (XEN) root_entry[0] = 13c6bb001 >> (XEN) context = ffff83013c6bb000 >> (XEN) context[fa] = 2_13fec4001 >> (XEN) l4 = ffff83013fec4000 >> (XEN) l4_index = 0 >> (XEN) l4[0] = 13fec1003 >> (XEN) l3 = ffff83013fec1000 >> (XEN) l3_index = 2 >> (XEN) l3[2] = 13ccbe003 >> (XEN) l2 = ffff83013ccbe000 >> (XEN) l2_index = 1fa >> (XEN) l2[1fa] = 13cac3003 >> (XEN) l1 = ffff83013cac3000 >> (XEN) l1_index = 17b >> (XEN) l1[17b] = 0 >> (XEN) l1[17b] not present >> ata4.00: exception Emask 0x60 SAct 0x1 SErr 0x800 action 0x6 frozen >> ata4.00: irq_stat 0x20000000, host bus error >> ata4: SError: { HostInt } >> ata4.00: failed command: WRITE FPDMA QUEUED >> ata4.00: cmd 61/80:00:43:b2:a1/00:00:0c:00:00/40 tag 0 ncq 65536 out >> res 40/00:04:43:b2:a1/00:00:0c:00:00/40 Emask 0x60 (host >> bus error) >> ata4.00: status: { DRDY } >> ata4: hard resetting link >> ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) >> ata4.00: configured for UDMA/133 >> ata4: EH complete >> (XEN) [VT-D]iommu.c:821: iommu_fault_status: Primary Pending Fault >> (XEN) [VT-D]iommu.c:796: DMAR:[DMA Read] Request device [00:1f.2] >> fault addr bf578000, iommu reg = ffff82c3fff57000 >> (XEN) DMAR:[fault reason 06h] PTE Read access is not set >> (XEN) print_vtd_entries: iommu = ffff83013fff3e80 bdf = 0:1f.2 gmfn = >> bf578 >> (XEN) root_entry = ffff83013ff36000 >> (XEN) root_entry[0] = 13c6bb001 >> (XEN) context = ffff83013c6bb000 >> (XEN) context[fa] = 2_13fec4001 >> (XEN) l4 = ffff83013fec4000 >> (XEN) l4_index = 0 >> (XEN) l4[0] = 13fec1003 >> (XEN) l3 = ffff83013fec1000 >> (XEN) l3_index = 2 >> (XEN) l3[2] = 13ccbe003 >> (XEN) l2 = ffff83013ccbe000 >> (XEN) l2_index = 1fa >> (XEN) l2[1fa] = 13cac3003 >> (XEN) l1 = ffff83013cac3000 >> (XEN) l1_index = 178 >> (XEN) l1[178] = 0 >> (XEN) l1[178] not present >> ata4.00: exception Emask 0x60 SAct 0x3 SErr 0x800 action 0x6 frozen >> ata4.00: irq_stat 0x20000000, host bus error >> ata4: SError: { HostInt } >> ata4.00: failed command: WRITE FPDMA QUEUED >> ata4.00: cmd 61/80:00:43:b2:a1/00:00:0c:00:00/40 tag 0 ncq 65536 out >> res 40/00:0c:43:b1:a1/00:00:0c:00:00/40 Emask 0x60 (host >> bus error) >> ata4.00: status: { DRDY } >> ata4.00: failed command: WRITE FPDMA QUEUED >> ata4.00: cmd 61/80:08:43:b1:a1/00:00:0c:00:00/40 tag 1 ncq 65536 out >> res 40/00:0c:43:b1:a1/00:00:0c:00:00/40 Emask 0x60 (host >> bus error) >> ata4.00: status: { DRDY } >> ata4: hard resetting link >> ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) >> ata4.00: configured for UDMA/133 >> ata4: EH complete >> (XEN) [VT-D]iommu.c:821: iommu_fault_status: Primary Pending Fault >> (XEN) [VT-D]iommu.c:796: DMAR:[DMA Read] Request device [00:1f.2] >> fault addr bf578000, iommu reg = ffff82c3fff57000 >> (XEN) DMAR:[fault reason 06h] PTE Read access is not set >> (XEN) print_vtd_entries: iommu = ffff83013fff3e80 bdf = 0:1f.2 gmfn = >> bf578 >> (XEN) root_entry = ffff83013ff36000 >> (XEN) root_entry[0] = 13c6bb001 >> (XEN) context = ffff83013c6bb000 >> (XEN) context[fa] = 2_13fec4001 >> (XEN) l4 = ffff83013fec4000 >> (XEN) l4_index = 0 >> (XEN) l4[0] = 13fec1003 >> (XEN) l3 = ffff83013fec1000 >> (XEN) l3_index = 2 >> (XEN) l3[2] = 13ccbe003 >> (XEN) l2 = ffff83013ccbe000 >> (XEN) l2_index = 1fa >> (XEN) l2[1fa] = 13cac3003 >> (XEN) l1 = ffff83013cac3000 >> (XEN) l1_index = 178 >> (XEN) l1[178] = 0 >> (XEN) l1[178] not present >> ata4.00: exception Emask 0x60 SAct 0x3 SErr 0x800 action 0x6 frozen >> ata4.00: irq_stat 0x20000000, host bus error >> ata4: SError: { HostInt } >> ata4.00: failed command: WRITE FPDMA QUEUED >> ata4.00: cmd 61/80:00:43:b1:a1/00:00:0c:00:00/40 tag 0 ncq 65536 out >> res 40/00:0c:43:b2:a1/00:00:0c:00:00/40 Emask 0x60 (host >> bus error) >> ata4.00: status: { DRDY } >> ata4.00: failed command: WRITE FPDMA QUEUED >> ata4.00: cmd 61/80:08:43:b2:a1/00:00:0c:00:00/40 tag 1 ncq 65536 out >> res 40/00:0c:43:b2:a1/00:00:0c:00:00/40 Emask 0x60 (host >> bus error) >> ata4.00: status: { DRDY } >> ata4: hard resetting link >> ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) >> ata4.00: configured for UDMA/133 >> ata4: EH complete >> (XEN) [VT-D]iommu.c:821: iommu_fault_status: Primary Pending Fault >> (XEN) [VT-D]iommu.c:796: DMAR:[DMA Read] Request device [00:1f.2] >> fault addr bf578000, iommu reg = ffff82c3fff57000 >> (XEN) DMAR:[fault reason 06h] PTE Read access is not set >> (XEN) print_vtd_entries: iommu = ffff83013fff3e80 bdf = 0:1f.2 gmfn = >> bf578 >> (XEN) root_entry = ffff83013ff36000 >> (XEN) root_entry[0] = 13c6bb001 >> (XEN) context = ffff83013c6bb000 >> (XEN) context[fa] = 2_13fec4001 >> (XEN) l4 = ffff83013fec4000 >> (XEN) l4_index = 0 >> (XEN) l4[0] = 13fec1003 >> (XEN) l3 = ffff83013fec1000 >> (XEN) l3_index = 2 >> (XEN) l3[2] = 13ccbe003 >> (XEN) l2 = ffff83013ccbe000 >> (XEN) l2_index = 1fa >> (XEN) l2[1fa] = 13cac3003 >> (XEN) l1 = ffff83013cac3000 >> (XEN) l1_index = 178 >> (XEN) l1[178] = 0 >> (XEN) l1[178] not present >> ata4.00: exception Emask 0x60 SAct 0x3f SErr 0x800 action 0x6 frozen >> ata4.00: irq_stat 0x20000000, host bus error >> ata4: SError: { HostInt } >> ata4.00: failed command: WRITE FPDMA QUEUED >> ata4.00: cmd 61/80:00:43:b2:a1/00:00:0c:00:00/40 tag 0 ncq 65536 out >> res 40/00:2c:43:39:a2/00:00:0c:00:00/40 Emask 0x60 (host >> bus error) >> ata4.00: status: { DRDY } >> ata4.00: failed command: WRITE FPDMA QUEUED >> ata4.00: cmd 61/80:08:43:b1:a1/00:00:0c:00:00/40 tag 1 ncq 65536 out >> res 40/00:2c:43:39:a2/00:00:0c:00:00/40 Emask 0x60 (host >> bus error) >> ata4.00: status: { DRDY } >> ata4.00: failed command: READ FPDMA QUEUED >> ata4.00: cmd 60/00:10:43:2d:a2/04:00:0c:00:00/40 tag 2 ncq 524288 in >> res 40/00:2c:43:39:a2/00:00:0c:00:00/40 Emask 0x60 (host >> bus error) >> ata4.00: status: { DRDY } >> ata4.00: failed command: READ FPDMA QUEUED >> ata4.00: cmd 60/00:18:43:31:a2/04:00:0c:00:00/40 tag 3 ncq 524288 in >> res 40/00:2c:43:39:a2/00:00:0c:00:00/40 Emask 0x60 (host >> bus error) >> ata4.00: status: { DRDY } >> ata4.00: failed command: READ FPDMA QUEUED >> ata4.00: cmd 60/00:20:43:35:a2/04:00:0c:00:00/40 tag 4 ncq 524288 in >> res 40/00:2c:43:39:a2/00:00:0c:00:00/40 Emask 0x60 (host >> bus error) >> ata4.00: status: { DRDY } >> ata4.00: failed command: READ FPDMA QUEUED >> ata4.00: cmd 60/00:28:43:39:a2/04:00:0c:00:00/40 tag 5 ncq 524288 in >> res 40/00:2c:43:39:a2/00:00:0c:00:00/40 Emask 0x60 (host >> bus error) >> ata4.00: status: { DRDY } >> ata4: hard resetting link >> ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) >> ata4.00: configured for UDMA/133 >> ata4: EH complete >> (XEN) [VT-D]iommu.c:821: iommu_fault_status: Primary Pending Fault >> (XEN) [VT-D]iommu.c:796: DMAR:[DMA Read] Request device [00:1f.2] >> fault addr bf578000, iommu reg = ffff82c3fff57000 >> (XEN) DMAR:[fault reason 06h] PTE Read access is not set >> (XEN) print_vtd_entries: iommu = ffff83013fff3e80 bdf = 0:1f.2 gmfn = >> bf578 >> (XEN) root_entry = ffff83013ff36000 >> (XEN) root_entry[0] = 13c6bb001 >> (XEN) context = ffff83013c6bb000 >> (XEN) context[fa] = 2_13fec4001 >> (XEN) l4 = ffff83013fec4000 >> (XEN) l4_index = 0 >> (XEN) l4[0] = 13fec1003 >> (XEN) l3 = ffff83013fec1000 >> (XEN) l3_index = 2 >> (XEN) l3[2] = 13ccbe003 >> (XEN) l2 = ffff83013ccbe000 >> (XEN) l2_index = 1fa >> (XEN) l2[1fa] = 13cac3003 >> (XEN) l1 = ffff83013cac3000 >> (XEN) l1_index = 178 >> (XEN) l1[178] = 0 >> (XEN) l1[178] not present >> ata4.00: exception Emask 0x60 SAct 0x3f SErr 0x800 action 0x6 frozen >> ata4.00: irq_stat 0x20000000, host bus error >> ata4: SError: { HostInt } >> ata4.00: failed command: READ FPDMA QUEUED >> ata4.00: cmd 60/00:00:43:39:a2/04:00:0c:00:00/40 tag 0 ncq 524288 in >> res 40/00:2c:43:b2:a1/00:00:0c:00:00/40 Emask 0x60 (host >> bus error) >> ata4.00: status: { DRDY } >> ata4.00: failed command: READ FPDMA QUEUED >> ata4.00: cmd 60/00:08:43:35:a2/04:00:0c:00:00/40 tag 1 ncq 524288 in >> res 40/00:2c:43:b2:a1/00:00:0c:00:00/40 Emask 0x60 (host >> bus error) >> ata4.00: status: { DRDY } >> ata4.00: failed command: READ FPDMA QUEUED >> ata4.00: cmd 60/00:10:43:31:a2/04:00:0c:00:00/40 tag 2 ncq 524288 in >> res 40/00:2c:43:b2:a1/00:00:0c:00:00/40 Emask 0x60 (host >> bus error) >> ata4.00: status: { DRDY } >> ata4.00: failed command: READ FPDMA QUEUED >> ata4.00: cmd 60/00:18:43:2d:a2/04:00:0c:00:00/40 tag 3 ncq 524288 in >> res 40/00:2c:43:b2:a1/00:00:0c:00:00/40 Emask 0x60 (host >> bus error) >> ata4.00: status: { DRDY } >> ata4.00: failed command: WRITE FPDMA QUEUED >> ata4.00: cmd 61/80:20:43:b1:a1/00:00:0c:00:00/40 tag 4 ncq 65536 out >> res 40/00:2c:43:b2:a1/00:00:0c:00:00/40 Emask 0x60 (host >> bus error) >> ata4.00: status: { DRDY } >> ata4.00: failed command: WRITE FPDMA QUEUED >> ata4.00: cmd 61/80:28:43:b2:a1/00:00:0c:00:00/40 tag 5 ncq 65536 out >> res 40/00:2c:43:b2:a1/00:00:0c:00:00/40 Emask 0x60 (host >> bus error) >> ata4.00: status: { DRDY } >> ata4: hard resetting link >> ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) >> ata4.00: configured for UDMA/133 >> ata4: EH complete >> (XEN) [VT-D]iommu.c:821: iommu_fault_status: Primary Pending Fault >> (XEN) [VT-D]iommu.c:796: DMAR:[DMA Read] Request device [00:1f.2] >> fault addr bf578000, iommu reg = ffff82c3fff57000 >> (XEN) DMAR:[fault reason 06h] PTE Read access is not set >> (XEN) print_vtd_entries: iommu = ffff83013fff3e80 bdf = 0:1f.2 gmfn = >> bf578 >> (XEN) root_entry = ffff83013ff36000 >> (XEN) root_entry[0] = 13c6bb001 >> (XEN) context = ffff83013c6bb000 >> (XEN) context[fa] = 2_13fec4001 >> (XEN) l4 = ffff83013fec4000 >> (XEN) l4_index = 0 >> (XEN) l4[0] = 13fec1003 >> (XEN) l3 = ffff83013fec1000 >> (XEN) l3_index = 2 >> (XEN) l3[2] = 13ccbe003 >> (XEN) l2 = ffff83013ccbe000 >> (XEN) l2_index = 1fa >> (XEN) l2[1fa] = 13cac3003 >> (XEN) l1 = ffff83013cac3000 >> (XEN) l1_index = 178 >> (XEN) l1[178] = 0 >> (XEN) l1[178] not present >> ata4.00: exception Emask 0x60 SAct 0x3f SErr 0x800 action 0x6 frozen >> ata4.00: irq_stat 0x20000000, host bus error >> ata4: SError: { HostInt } >> ata4.00: failed command: WRITE FPDMA QUEUED >> ata4.00: cmd 61/80:00:43:b2:a1/00:00:0c:00:00/40 tag 0 ncq 65536 out >> res 40/00:2c:43:39:a2/00:00:0c:00:00/40 Emask 0x60 (host >> bus error) >> ata4.00: status: { DRDY } >> ata4.00: failed command: WRITE FPDMA QUEUED >> ata4.00: cmd 61/80:08:43:b1:a1/00:00:0c:00:00/40 tag 1 ncq 65536 out >> res 40/00:2c:43:39:a2/00:00:0c:00:00/40 Emask 0x60 (host >> bus error) >> ata4.00: status: { DRDY } >> ata4.00: failed command: READ FPDMA QUEUED >> ata4.00: cmd 60/00:10:43:2d:a2/04:00:0c:00:00/40 tag 2 ncq 524288 in >> res 40/00:2c:43:39:a2/00:00:0c:00:00/40 Emask 0x60 (host >> bus error) >> ata4.00: status: { DRDY } >> ata4.00: failed command: READ FPDMA QUEUED >> ata4.00: cmd 60/00:18:43:31:a2/04:00:0c:00:00/40 tag 3 ncq 524288 in >> res 40/00:2c:43:39:a2/00:00:0c:00:00/40 Emask 0x60 (host >> bus error) >> ata4.00: status: { DRDY } >> ata4.00: failed command: READ FPDMA QUEUED >> ata4.00: cmd 60/00:20:43:35:a2/04:00:0c:00:00/40 tag 4 ncq 524288 in >> res 40/00:2c:43:39:a2/00:00:0c:00:00/40 Emask 0x60 (host >> bus error) >> ata4.00: status: { DRDY } >> ata4.00: failed command: READ FPDMA QUEUED >> ata4.00: cmd 60/00:28:43:39:a2/04:00:0c:00:00/40 tag 5 ncq 524288 in >> res 40/00:2c:43:39:a2/00:00:0c:00:00/40 Emask 0x60 (host >> bus error) >> ata4.00: status: { DRDY } >> ata4: hard resetting link >> ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) >> ata4.00: configured for UDMA/133 >> sd 3:0:0:0: [sdd] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE >> sd 3:0:0:0: [sdd] Sense Key : Aborted Command [current] [descriptor] >> Descriptor sense data with sense descriptors (in hex): >> 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 >> 0c a2 39 43 >> sd 3:0:0:0: [sdd] Add. Sense: No additional sense information >> sd 3:0:0:0: [sdd] CDB: Write(10): 2a 00 0c a1 b2 43 00 00 80 00 >> end_request: I/O error, dev sdd, sector 211923523 >> raid10: Disk failure on sdd3, disabling device. >> raid10: Operation continuing on 2 devices. >> ata4: EH complete >> md: md0: resync done. >> (XEN) [VT-D]iommu.c:821: iommu_fault_status: Primary Pending Fault >> (XEN) [VT-D]iommu.c:796: DMAR:[DMA Read] Request device [00:1f.2] >> fault addr bf578000, iommu reg = ffff82c3fff57000 >> (XEN) DMAR:[fault reason 06h] PTE Read access is not set >> (XEN) print_vtd_entries: iommu = ffff83013fff3e80 bdf = 0:1f.2 gmfn = >> bf578 >> (XEN) root_entry = ffff83013ff36000 >> (XEN) root_entry[0] = 13c6bb001 >> (XEN) context = ffff83013c6bb000 >> (XEN) context[fa] = 2_13fec4001 >> (XEN) l4 = ffff83013fec4000 >> (XEN) l4_index = 0 >> (XEN) l4[0] = 13fec1003 >> (XEN) l3 = ffff83013fec1000 >> (XEN) l3_index = 2 >> (XEN) l3[2] = 13ccbe003 >> (XEN) l2 = ffff83013ccbe000 >> (XEN) l2_index = 1fa >> (XEN) l2[1fa] = 13cac3003 >> (XEN) l1 = ffff83013cac3000 >> (XEN) l1_index = 178 >> (XEN) l1[178] = 0 >> (XEN) l1[178] not present >> ata4.00: exception Emask 0x60 SAct 0x1f SErr 0x800 action 0x6 frozen >> ata4.00: irq_stat 0x20000000, host bus error >> ata4: SError: { HostInt } >> ata4.00: failed command: READ FPDMA QUEUED >> ata4.00: cmd 60/00:00:43:39:a2/04:00:0c:00:00/40 tag 0 ncq 524288 in >> res 40/00:24:43:b1:a1/00:00:0c:00:00/40 Emask 0x60 (host >> bus error) >> ata4.00: status: { DRDY } >> ata4.00: failed command: READ FPDMA QUEUED >> ata4.00: cmd 60/00:08:43:35:a2/04:00:0c:00:00/40 tag 1 ncq 524288 in >> res 40/00:24:43:b1:a1/00:00:0c:00:00/40 Emask 0x60 (host >> bus error) >> ata4.00: status: { DRDY } >> ata4.00: failed command: READ FPDMA QUEUED >> ata4.00: cmd 60/00:10:43:31:a2/04:00:0c:00:00/40 tag 2 ncq 524288 in >> res 40/00:24:43:b1:a1/00:00:0c:00:00/40 Emask 0x60 (host >> bus error) >> ata4.00: status: { DRDY } >> ata4.00: failed command: READ FPDMA QUEUED >> ata4.00: cmd 60/00:18:43:2d:a2/04:00:0c:00:00/40 tag 3 ncq 524288 in >> res 40/00:24:43:b1:a1/00:00:0c:00:00/40 Emask 0x60 (host >> bus error) >> ata4.00: status: { DRDY } >> ata4.00: failed command: WRITE FPDMA QUEUED >> ata4.00: cmd 61/80:20:43:b1:a1/00:00:0c:00:00/40 tag 4 ncq 65536 out >> res 40/00:24:43:b1:a1/00:00:0c:00:00/40 Emask 0x60 (host >> bus error) >> ata4.00: status: { DRDY } >> ata4: hard resetting link >> ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) >> ata4.00: configured for UDMA/133 >> sd 3:0:0:0: [sdd] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE >> sd 3:0:0:0: [sdd] Sense Key : Aborted Command [current] [descriptor] >> Descriptor sense data with sense descriptors (in hex): >> 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 >> 0c a1 b1 43 >> sd 3:0:0:0: [sdd] Add. Sense: No additional sense information >> sd 3:0:0:0: [sdd] CDB: Write(10): 2a 00 0c a1 b1 43 00 00 80 00 >> end_request: I/O error, dev sdd, sector 211923267 >> ata4: EH complete >> md: checkpointing resync of md0. >> RAID10 conf printout: >> --- wd:2 rd:4 >> disk 0, wo:0, o:1, dev:sda3 >> disk 2, wo:0, o:1, dev:sdc3 >> disk 3, wo:1, o:0, dev:sdd3 >> RAID10 conf printout: >> --- wd:2 rd:4 >> disk 0, wo:0, o:1, dev:sda3 >> disk 2, wo:0, o:1, dev:sdc3 >> md: resync of RAID array md0 >> md: minimum _guaranteed_ speed: 1000 KB/sec/disk. >> md: using maximum available idle IO bandwidth (but not more than >> 200000 KB/sec) for resync. >> md: using 128k window, over a total of 819199872 blocks. >> md: resuming resync of md0 from checkpoint. >> md: md0: resync done. >> RAID10 conf printout: >> --- wd:2 rd:4 >> disk 0, wo:0, o:1, dev:sda3 >> disk 2, wo:0, o:1, dev:sdc3 >> >> >> >> >> ========================================================================= >> >> >> >> __ __ _ _ _ _ _ _ >> \ \/ /___ _ __ | || | / | _ _ _ __ ___| |_ __ _| |__ | | ___ >> \ // _ \ '_ \ | || |_ | |__| | | | '_ \/ __| __/ _` | '_ \| |/ _ \ >> / \ __/ | | | |__ _|| |__| |_| | | | \__ \ || (_| | |_) | | __/ >> /_/\_\___|_| |_| |_|(_)_| \__,_|_| |_|___/\__\__,_|_.__/|_|\___| >> >> (XEN) Xen version 4.1-unstable (jeremy@) (gcc version 4.4.3 20100127 >> (Red Hat 4.4.3-4) (GCC) ) Tue Apr 6 17:23:29 PDT 2010 >> (XEN) Latest ChangeSet: Tue Apr 06 17:23:12 2010 -0700 >> 21115:ea6c67dc4577 >> (XEN) Command line: com2=115200,8n1,0x3e8,5 console=com2,vga >> cpufreq=xen iommu=verbose >> (XEN) Video information: >> (XEN) VGA is text mode 80x25, font 8x16 >> (XEN) VBE/DDC methods: none; EDID transfer time: 0 seconds >> (XEN) EDID info not retrieved because no DDC retrieval method detected >> (XEN) Disc information: >> (XEN) Found 4 MBR signatures >> (XEN) Found 4 EDD information structures >> (XEN) Xen-e820 RAM map: >> (XEN) 0000000000000000 - 000000000009d800 (usable) >> (XEN) 000000000009d800 - 00000000000a0000 (reserved) >> (XEN) 00000000000e0000 - 0000000000100000 (reserved) >> (XEN) 0000000000100000 - 00000000bf790000 (usable) >> (XEN) 00000000bf79e000 - 00000000bf7a0000 type 9 >> (XEN) 00000000bf7a0000 - 00000000bf7ae000 (ACPI data) >> (XEN) 00000000bf7ae000 - 00000000bf7d0000 (ACPI NVS) >> (XEN) 00000000bf7d0000 - 00000000bf7e0000 (reserved) >> (XEN) 00000000bf7ed000 - 00000000c0000000 (reserved) >> (XEN) 00000000e0000000 - 00000000f0000000 (reserved) >> (XEN) 00000000fed20000 - 00000000fed40000 (reserved) >> (XEN) 00000000fee00000 - 00000000fee01000 (reserved) >> (XEN) 0000000100000000 - 0000000140000000 (usable) >> (XEN) ACPI: RSDP 000FA110, 0024 (r2 ACPIAM) >> (XEN) ACPI: XSDT BF7A0100, 0084 (r1 SMCI 20100225 >> MSFT 97) >> (XEN) ACPI: FACP BF7A0290, 00F4 (r4 022510 FACP1918 20100225 >> MSFT 97) >> (XEN) ACPI: DSDT BF7A05F0, 6C55 (r2 10605 10605000 0 INTL >> 20051117) >> (XEN) ACPI: FACS BF7AE000, 0040 >> (XEN) ACPI: APIC BF7A0390, 0092 (r2 022510 APIC1918 20100225 >> MSFT 97) >> (XEN) ACPI: MCFG BF7A0430, 003C (r1 022510 OEMMCFG 20100225 >> MSFT 97) >> (XEN) ACPI: OEMB BF7AE040, 0073 (r1 022510 OEMB1918 20100225 >> MSFT 97) >> (XEN) ACPI: HPET BF7AA5F0, 0038 (r1 022510 OEMHPET 20100225 >> MSFT 97) >> (XEN) ACPI: GSCI BF7AE0C0, 2024 (r1 022510 GMCHSCI 20100225 >> MSFT 97) >> (XEN) ACPI: DMAR BF7B00F0, 0090 (r1 AMI OEMDMAR 1 >> MSFT 97) >> (XEN) ACPI: SSDT BF7B1580, 0363 (r1 DpgPmm CpuPm 12 INTL >> 20051117) >> (XEN) ACPI: EINJ BF7AA630, 0130 (r1 AMIER AMI_EINJ 20100225 >> MSFT 97) >> (XEN) ACPI: BERT BF7AA7C0, 0030 (r1 AMIER AMI_BERT 20100225 >> MSFT 97) >> (XEN) ACPI: ERST BF7AA7F0, 01B0 (r1 AMIER AMI_ERST 20100225 >> MSFT 97) >> (XEN) ACPI: HEST BF7AA9A0, 00A8 (r1 AMIER ABC_HEST 20100225 >> MSFT 97) >> (XEN) System RAM: 4056MB (4153584kB) >> (XEN) No NUMA configuration found >> (XEN) Faking a node at 0000000000000000-0000000140000000 >> (XEN) Domain heap initialised >> (XEN) found SMP MP-table at 000ff780 >> (XEN) DMI present. >> (XEN) Using APIC driver default >> (XEN) ACPI: PM-Timer IO Port: 0x808 >> (XEN) ACPI: ACPI SLEEP INFO: pm1x_cnt[804,0], pm1x_evt[800,0] >> (XEN) ACPI: wakeup_vec[bf7ae00c], vec_size[20] >> (XEN) ACPI: Local APIC address 0xfee00000 >> (XEN) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) >> (XEN) Processor #0 7:14 APIC version 21 >> (XEN) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) >> (XEN) Processor #2 7:14 APIC version 21 >> (XEN) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled) >> (XEN) Processor #4 7:14 APIC version 21 >> (XEN) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled) >> (XEN) Processor #6 7:14 APIC version 21 >> (XEN) ACPI: LAPIC (acpi_id[0x05] lapic_id[0x84] disabled) >> (XEN) ACPI: LAPIC (acpi_id[0x06] lapic_id[0x85] disabled) >> (XEN) ACPI: LAPIC (acpi_id[0x07] lapic_id[0x86] disabled) >> (XEN) ACPI: LAPIC (acpi_id[0x08] lapic_id[0x87] disabled) >> (XEN) ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) >> (XEN) ACPI: IOAPIC (id[0x07] address[0xfec00000] gsi_base[0]) >> (XEN) IOAPIC[0]: apic_id 7, version 32, address 0xfec00000, GSI 0-23 >> (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) >> (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) >> (XEN) ACPI: IRQ0 used by override. >> (XEN) ACPI: IRQ2 used by override. >> (XEN) ACPI: IRQ9 used by override. >> (XEN) Enabling APIC mode: Flat. Using 1 I/O APICs >> (XEN) ACPI: HPET id: 0x8086a701 base: 0xfed00000 >> (XEN) [VT-D]dmar.c:679: Host address width 36 >> (XEN) [VT-D]dmar.c:694: found ACPI_DMAR_DRHD: >> (XEN) [VT-D]dmar.c:398: dmaru->address = fed90000 >> (XEN) [VT-D]dmar.c:411: flags: INCLUDE_ALL >> (XEN) [VT-D]dmar.c:699: found ACPI_DMAR_RMRR: >> (XEN) [VT-D]dmar.c:334: endpoint: 0:1d.0 >> (XEN) [VT-D]dmar.c:334: endpoint: 0:1a.0 >> (XEN) [VT-D]dmar.c:571: RMRR region: base_addr ed000 end_address effff >> (XEN) [VT-D]dmar.c:699: found ACPI_DMAR_RMRR: >> (XEN) [VT-D]dmar.c:334: endpoint: 0:1d.0 >> (XEN) [VT-D]dmar.c:334: endpoint: 0:1a.0 >> (XEN) [VT-D]dmar.c:571: RMRR region: base_addr bf7ed000 end_address >> bf7fffff >> (XEN) PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 >> (XEN) PCI: MCFG area at e0000000 reserved in E820 >> (XEN) Using ACPI (MADT) for SMP configuration information >> (XEN) Using scheduler: SMP Credit Scheduler (credit) >> (XEN) Detected 2400.063 MHz processor. >> (XEN) Initing memory sharing. >> (XEN) EPT support 2M super page. >> (XEN) VMX: Supported advanced features: >> (XEN) - APIC MMIO access virtualisation >> (XEN) - APIC TPR shadow >> (XEN) - Extended Page Tables (EPT) >> (XEN) - Virtual-Processor Identifiers (VPID) >> (XEN) - Virtual NMI >> (XEN) - MSR direct-access bitmap >> (XEN) HVM: ASIDs enabled. >> (XEN) HVM: VMX enabled >> (XEN) HVM: Hardware Assisted Paging detected. >> (XEN) Intel machine check reporting enabled >> (XEN) [VT-D]iommu.c:1078: drhd->address = fed90000 iommu->reg = >> ffff82c3fff57000 >> (XEN) [VT-D]iommu.c:1080: cap = c90780106f0462 ecap = f020e3 >> (XEN) Intel VT-d Snoop Control supported. >> (XEN) Intel VT-d DMA Passthrough not supported. >> (XEN) Intel VT-d Queued Invalidation supported. >> (XEN) Intel VT-d Interrupt Remapping not supported. >> (XEN) I/O virtualisation enabled >> (XEN) I/O virtualisation for PV guests disabled >> (XEN) EPT support 2M super page. >> (XEN) EPT support 2M super page. >> (XEN) EPT support 2M super page. >> (XEN) Total of 4 processors activated. >> (XEN) ENABLING IO-APIC IRQs >> (XEN) -> Using new ACK method >> (XEN) ..TIMER: vector=0xF0 apic1=0 pin1=2 apic2=-1 pin2=-1 >> (XEN) TSC is reliable, synchronization unnecessary >> (XEN) Platform timer is 14.318MHz HPET >> �(XEN) Allocated console ring of 32 KiB. >> (XEN) microcode.c:73:d32767 microcode: CPU1 resumed >> (XEN) microcode.c:73:d32767 microcode: CPU2 resumed >> (XEN) Brought up 4 CPUs >> (XEN) microcode.c:73:d32767 microcode: CPU3 resumed >> (XEN) Turbo Mode detected! >> (XEN) HPET: 8 timers in total, 8 timers will be used for broadcast >> (XEN) ACPI sleep modes: S3 >> (XEN) mcheck_poll: Machine check polling timer started. >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 0:0.0 >> (XEN) [VT-D]iommu.c:1325: d0:PCIe: map bdf = 0:8.0 >> (XEN) [VT-D]iommu.c:1325: d0:PCIe: map bdf = 0:8.1 >> (XEN) [VT-D]iommu.c:1325: d0:PCIe: map bdf = 0:8.2 >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 0:8.3 >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 0:10.0 >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 0:10.1 >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 0:1a.0 >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 0:1d.0 >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 0:1f.0 >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 0:1f.2 >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 0:1f.3 >> (XEN) [VT-D]iommu.c:1325: d0:PCIe: map bdf = 3:0.0 >> (XEN) [VT-D]iommu.c:1325: d0:PCIe: map bdf = 4:0.0 >> (XEN) [VT-D]iommu.c:1325: d0:PCIe: map bdf = 5:0.0 >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 6:3.0 >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 6:3.1 >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 6:3.2 >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 6:3.3 >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 6:3.4 >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 6:3.5 >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 6:3.6 >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 6:3.7 >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = ff:0.0 >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = ff:0.1 >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = ff:2.0 >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = ff:2.1 >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = ff:3.0 >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = ff:3.1 >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = ff:3.2 >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = ff:3.4 >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = ff:4.0 >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = ff:4.1 >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = ff:4.2 >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = ff:4.3 >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = ff:5.0 >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = ff:5.1 >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = ff:5.2 >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = ff:5.3 >> (XEN) [VT-D]iommu.c:695: iommu_enable_translation: iommu->reg = >> ffff82c3fff57000 >> (XEN) *** LOADING DOMAIN 0 *** >> (XEN) elf_parse_binary: phdr: paddr=0x1000000 memsz=0x69c000 >> (XEN) elf_parse_binary: phdr: paddr=0x169c000 memsz=0xe3cb0 >> (XEN) elf_parse_binary: phdr: paddr=0x1780000 memsz=0x888 >> (XEN) elf_parse_binary: phdr: paddr=0x1781000 memsz=0x14498 >> (XEN) elf_parse_binary: phdr: paddr=0x1796000 memsz=0x9f5000 >> (XEN) elf_parse_binary: memory: 0x1000000 -> 0x218b000 >> (XEN) elf_xen_parse_note: GUEST_OS = "linux" >> (XEN) elf_xen_parse_note: GUEST_VERSION = "2.6" >> (XEN) elf_xen_parse_note: XEN_VERSION = "xen-3.0" >> (XEN) elf_xen_parse_note: VIRT_BASE = 0xffffffff80000000 >> (XEN) elf_xen_parse_note: ENTRY = 0xffffffff81796200 >> (XEN) elf_xen_parse_note: HYPERCALL_PAGE = 0xffffffff81009000 >> (XEN) elf_xen_parse_note: FEATURES = >> "!writable_page_tables|pae_pgdir_above_4gb" >> (XEN) elf_xen_parse_note: PAE_MODE = "yes" >> (XEN) elf_xen_parse_note: LOADER = "generic" >> (XEN) elf_xen_parse_note: unknown xen elf note (0xd) >> (XEN) elf_xen_parse_note: SUSPEND_CANCEL = 0x1 >> (XEN) elf_xen_parse_note: HV_START_LOW = 0xffff800000000000 >> (XEN) elf_xen_parse_note: PADDR_OFFSET = 0x0 >> (XEN) elf_xen_addr_calc_check: addresses: >> (XEN) virt_base = 0xffffffff80000000 >> (XEN) elf_paddr_offset = 0x0 >> (XEN) virt_offset = 0xffffffff80000000 >> (XEN) virt_kstart = 0xffffffff81000000 >> (XEN) virt_kend = 0xffffffff8218b000 >> (XEN) virt_entry = 0xffffffff81796200 >> (XEN) p2m_base = 0xffffffffffffffff >> (XEN) Xen kernel: 64-bit, lsb, compat32 >> (XEN) Dom0 kernel: 64-bit, PAE, lsb, paddr 0x1000000 -> 0x218b000 >> (XEN) PHYSICAL MEMORY ARRANGEMENT: >> (XEN) Dom0 alloc.: 0000000138000000->000000013c000000 (981633 >> pages to be allocated) >> (XEN) VIRTUAL MEMORY ARRANGEMENT: >> (XEN) Loaded kernel: ffffffff81000000->ffffffff8218b000 >> (XEN) Init. ramdisk: ffffffff8218b000->ffffffff82b69800 >> (XEN) Phys-Mach map: ffffffff82b6a000->ffffffff83307408 >> (XEN) Start info: ffffffff83308000->ffffffff833084b4 >> (XEN) Page tables: ffffffff83309000->ffffffff83326000 >> (XEN) Boot stack: ffffffff83326000->ffffffff83327000 >> (XEN) TOTAL: ffffffff80000000->ffffffff83400000 >> (XEN) ENTRY ADDRESS: ffffffff81796200 >> (XEN) Dom0 has maximum 4 VCPUs >> (XEN) elf_load_binary: phdr 0 at 0xffffffff81000000 -> >> 0xffffffff8169c000 >> (XEN) elf_load_binary: phdr 1 at 0xffffffff8169c000 -> >> 0xffffffff8177fcb0 >> (XEN) elf_load_binary: phdr 2 at 0xffffffff81780000 -> >> 0xffffffff81780888 >> (XEN) elf_load_binary: phdr 3 at 0xffffffff81781000 -> >> 0xffffffff81795498 >> (XEN) elf_load_binary: phdr 4 at 0xffffffff81796000 -> >> 0xffffffff81830000 >> (XEN) Scrubbing Free RAM: .done. >> (XEN) Xen trace buffers: disabled >> (XEN) Std. Loglevel: All >> (XEN) Guest Loglevel: All >> (XEN) Xen is relinquishing VGA console. >> (XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch >> input to Xen) >> (XEN) Freed 164kB init memory. >> mapping kernel into physical memory >> Xen: setup ISA identity maps >> about to get started... >> Initializing cgroup subsys cpuset >> Initializing cgroup subsys cpu >> Linux version 2.6.32.11 (jeremy@lilith.goop.org) (gcc version 4.4.3 >> 20100127 (Red Hat 4.4.3-4) (GCC) ) #7 SMP PREEMPT Mon Apr 5 14:58:54 >> PDT 2010 >> Command line: ro root=/dev/mapper/vg_lilith--raid-root >> LANG=en_US.UTF-8 SYSFONT=latarcyrheb-sun16 KEYBOARDTYPE=pc >> KEYTABLE=us ignore_loglevel earlyprintk=xen console=hvc0 rdshell >> pcie_aspm=off >> KERNEL supported cpus: >> Intel GenuineIntel >> AMD AuthenticAMD >> Centaur CentaurHauls >> xen_release_chunk: looking at area pfn bf790-bf79e: 14 pages freed >> xen_release_chunk: looking at area pfn bf7e0-bf7ed: 13 pages freed >> xen_release_chunk: looking at area pfn c0000-e0000: 131072 pages freed >> xen_release_chunk: looking at area pfn f0000-fec00: 14977 pages freed >> xen_release_chunk: looking at area pfn fec01-fed20: 0 pages freed >> xen_release_chunk: looking at area pfn fed40-fee00: 0 pages freed >> released 146076 pages of unused memory >> BIOS-provided physical RAM map: >> Xen: 0000000000000000 - 000000000009d800 (usable) >> Xen: 000000000009d800 - 0000000000100000 (reserved) >> Xen: 0000000000100000 - 00000000bf790000 (usable) >> Xen: 00000000bf79e000 - 00000000bf7a0000 type 9 >> Xen: 00000000bf7a0000 - 00000000bf7ae000 (ACPI data) >> Xen: 00000000bf7ae000 - 00000000bf7d0000 (ACPI NVS) >> Xen: 00000000bf7d0000 - 00000000bf7e0000 (reserved) >> Xen: 00000000bf7ed000 - 00000000c0000000 (reserved) >> Xen: 00000000e0000000 - 00000000f0000000 (reserved) >> Xen: 00000000fec00000 - 00000000fec01000 (reserved) >> Xen: 00000000fed20000 - 00000000fed40000 (reserved) >> Xen: 00000000fee00000 - 00000000fee01000 (reserved) >> debug: ignoring loglevel setting. >> bootconsole [xenboot0] enabled >> DMI present. >> last_pfn = 0xbf790 max_arch_pfn = 0x400000000 >> x86 PAT enabled: cpu 0, old 0x50100070406, new 0x7010600070106 >> initial memory mapped : 0 - 20000000 >> init_memory_mapping: 0000000000000000-00000000bf790000 >> 0000000000 - 00bf790000 page 4k >> kernel direct mapping tables up to bf790000 @ 100000-700000 >> RAMDISK: 0218b000 - 02b69800 >> ACPI: RSDP 00000000000fa110 00024 (v02 ACPIAM) >> ACPI: XSDT 00000000bf7a0100 00084 (v01 SMCI 20100225 MSFT >> 00000097) >> ACPI: FACP 00000000bf7a0290 000F4 (v04 022510 FACP1918 20100225 MSFT >> 00000097) >> ACPI: DSDT 00000000bf7a05f0 06C55 (v02 10605 10605000 00000000 INTL >> 20051117) >> ACPI: FACS 00000000bf7ae000 00040 >> ACPI: APIC 00000000bf7a0390 00092 (v02 022510 APIC1918 20100225 MSFT >> 00000097) >> ACPI: MCFG 00000000bf7a0430 0003C (v01 022510 OEMMCFG 20100225 MSFT >> 00000097) >> ACPI: OEMB 00000000bf7ae040 00073 (v01 022510 OEMB1918 20100225 MSFT >> 00000097) >> ACPI: HPET 00000000bf7aa5f0 00038 (v01 022510 OEMHPET 20100225 MSFT >> 00000097) >> ACPI: GSCI 00000000bf7ae0c0 02024 (v01 022510 GMCHSCI 20100225 MSFT >> 00000097) >> ACPI: 00000000bf7b00f0 00090 (v01 AMI OEMDMAR 00000001 MSFT >> 00000097) >> ACPI: SSDT 00000000bf7b1580 00363 (v01 DpgPmm CpuPm 00000012 INTL >> 20051117) >> ACPI: EINJ 00000000bf7aa630 00130 (v01 AMIER AMI_EINJ 20100225 MSFT >> 00000097) >> ACPI: BERT 00000000bf7aa7c0 00030 (v01 AMIER AMI_BERT 20100225 MSFT >> 00000097) >> ACPI: ERST 00000000bf7aa7f0 001B0 (v01 AMIER AMI_ERST 20100225 MSFT >> 00000097) >> ACPI: HEST 00000000bf7aa9a0 000A8 (v01 AMIER ABC_HEST 20100225 MSFT >> 00000097) >> ACPI: Local APIC address 0xfee00000 >> No NUMA configuration found >> Faking a node at 0000000000000000-00000000bf790000 >> Bootmem setup node 0 0000000000000000-00000000bf790000 >> NODE_DATA [0000000000001000 - 0000000000005fff] >> bootmap [0000000000008000 - 000000000001fef7] pages 18 >> (8 early reservations) ==> bootmem [0000000000 - 00bf790000] >> #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - >> 0000001000] >> #1 [0003309000 - 0003326000] XEN PAGETABLES ==> [0003309000 - >> 0003326000] >> #2 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - >> 0000008000] >> #3 [0001000000 - 000216a048] TEXT DATA BSS ==> [0001000000 - >> 000216a048] >> #4 [000218b000 - 0002b69800] RAMDISK ==> [000218b000 - >> 0002b69800] >> #5 [0002b6a000 - 0003309000] XEN START INFO ==> [0002b6a000 - >> 0003309000] >> #6 [000216b000 - 000216b21b] BRK ==> [000216b000 - >> 000216b21b] >> #7 [0000100000 - 00006e0000] PGTABLE ==> [0000100000 - >> 00006e0000] >> found SMP MP-table at [ffff8800000ff780] ff780 >> Zone PFN ranges: >> DMA 0x00000000 -> 0x00001000 >> DMA32 0x00001000 -> 0x00100000 >> Normal 0x00100000 -> 0x00100000 >> Movable zone start PFN for each node >> early_node_map[2] active PFN ranges >> 0: 0x00000000 -> 0x0000009d >> 0: 0x00000100 -> 0x000bf790 >> On node 0 totalpages: 784173 >> DMA zone: 88 pages used for memmap >> DMA zone: 1507 pages reserved >> DMA zone: 2402 pages, LIFO batch:0 >> DMA32 zone: 16762 pages used for memmap >> DMA32 zone: 763414 pages, LIFO batch:31 >> ACPI: PM-Timer IO Port: 0x808 >> ACPI: Local APIC address 0xfee00000 >> ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) >> ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) >> ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled) >> ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled) >> ACPI: LAPIC (acpi_id[0x05] lapic_id[0x84] disabled) >> ACPI: LAPIC (acpi_id[0x06] lapic_id[0x85] disabled) >> ACPI: LAPIC (acpi_id[0x07] lapic_id[0x86] disabled) >> ACPI: LAPIC (acpi_id[0x08] lapic_id[0x87] disabled) >> ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) >> ACPI: IOAPIC (id[0x07] address[0xfec00000] gsi_base[0]) >> IOAPIC[0]: apic_id 7, version 0, address 0xfec00000, GSI 0-0 >> ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) >> ERROR: Unable to locate IOAPIC for GSI 2 >> ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) >> ERROR: Unable to locate IOAPIC for GSI 9 >> Using ACPI (MADT) for SMP configuration information >> ACPI: HPET id: 0x8086a701 base: 0xfed00000 >> SMP: Allowing 4 CPUs, 0 hotplug CPUs >> nr_irqs_gsi: 256 >> PM: Registered nosave memory: 000000000009d000 - 000000000009e000 >> PM: Registered nosave memory: 000000000009e000 - 0000000000100000 >> Allocating PCI resources starting at c0000000 (gap: c0000000:20000000) >> Booting paravirtualized kernel on Xen >> Xen version: 4.1-unstable (preserve-AD) (dom0) >> NR_CPUS:16 nr_cpumask_bits:16 nr_cpu_ids:4 nr_node_ids:1 >> PERCPU: Embedded 28 pages/cpu @ffff88000336d000 s83096 r8192 d23400 >> u114688 >> pcpu-alloc: s83096 r8192 d23400 u114688 alloc=28*4096 >> pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 >> trying to map vcpu_info 0 at ffff880003378020, mfn 13b378, offset 32 >> cpu 0 using vcpu_info at ffff880003378020 >> trying to map vcpu_info 1 at ffff880003394020, mfn 13b394, offset 32 >> cpu 1 using vcpu_info at ffff880003394020 >> trying to map vcpu_info 2 at ffff8800033b0020, mfn 13b3b0, offset 32 >> cpu 2 using vcpu_info at ffff8800033b0020 >> trying to map vcpu_info 3 at ffff8800033cc020, mfn 13b3cc, offset 32 >> cpu 3 using vcpu_info at ffff8800033cc020 >> Xen: using vcpu_info placement >> Built 1 zonelists in Node order, mobility grouping on. Total pages: >> 765816 >> Policy zone: DMA32 >> Kernel command line: ro root=/dev/mapper/vg_lilith--raid-root >> LANG=en_US.UTF-8 SYSFONT=latarcyrheb-sun16 KEYBOARDTYPE=pc >> KEYTABLE=us ignore_loglevel earlyprintk=xen console=hvc0 rdshell >> pcie_aspm=off >> PCIe ASPM is disabled >> PID hash table entries: 4096 (order: 3, 32768 bytes) >> Initializing CPU#0 >> DMA: Placing 64MB software IO TLB between ffff88000794a000 - >> ffff88000b94a000 >> DMA: software IO TLB at phys 0x794a000 - 0xb94a000 >> xen_swiotlb_fixup: buf=ffff88000794a000 size=67108864 >> xen_swiotlb_fixup: buf=ffff88000b9aa000 size=32768 >> Memory: 2960308k/3137088k available (4691k kernel code, 396k absent, >> 176384k reserved, 2987k data, 656k init) >> Hierarchical RCU implementation. >> NR_IRQS:4352 nr_irqs:1280 >> xen: --> irq=0 >> xen: --> irq=1 >> xen: --> irq=2 >> xen: --> irq=3 >> xen: --> irq=4 >> xen: --> irq=5 >> xen: --> irq=6 >> xen: --> irq=7 >> xen: --> irq=8 >> xen: --> irq=9 >> xen: --> irq=10 >> xen: --> irq=11 >> xen: --> irq=12 >> xen: --> irq=13 >> xen: --> irq=14 >> xen: --> irq=15 >> ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) >> ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) >> xen: sci override: source_irq=9 global_irq=9 trigger=c polarity=1 >> xen: registering gsi 9 triggering 0 polarity 0 >> xen_allocate_pirq: returning irq 9 for gsi 9 >> xen: --> irq=9 >> xen: acpi sci 9 >> Console: colour VGA+ 80x25 >> console [hvc0] enabled, bootconsole disabled >> console [hvc0] enabled, bootconsole disabled >> Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar >> ... MAX_LOCKDEP_SUBCLASSES: 8 >> ... MAX_LOCK_DEPTH: 48 >> ... MAX_LOCKDEP_KEYS: 8191 >> ... CLASSHASH_SIZE: 4096 >> ... MAX_LOCKDEP_ENTRIES: 16384 >> ... MAX_LOCKDEP_CHAINS: 32768 >> ... CHAINHASH_SIZE: 16384 >> memory used by lock dependency info: 5855 kB >> per task-struct memory footprint: 1920 bytes >> Xen: using vcpuop timer interface >> installing Xen timer for CPU 0 >> alloc irq_desc for 1279 on node 0 >> alloc kstat_irqs on node 0 >> Detected 2400.062 MHz processor. >> Calibrating delay loop (skipped), value calculated using timer >> frequency.. 4800.12 BogoMIPS (lpj=2400062) >> Security Framework initialized >> SELinux: Initializing. >> SELinux: Starting in permissive mode >> Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) >> Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) >> Mount-cache hash table entries: 256 >> Initializing cgroup subsys ns >> Initializing cgroup subsys cpuacct >> CPU: L1 I cache: 32K, L1 D cache: 32K >> CPU: L2 cache: 256K >> CPU: L3 cache: 8192K >> CPU 0/0x0 -> Node 0 >> CPU: Unsupported number of siblings 16 >> Performance Events: unsupported p6 CPU model 30 no PMU driver, >> software events only. >> lockdep: fixing up alternatives. >> SMP alternatives: switching to UP code >> ACPI: Core revision 20090903 >> alloc irq_desc for 1278 on node 0 >> alloc kstat_irqs on node 0 >> cpu 0 spinlock event irq 1278 >> alloc irq_desc for 1277 on node 0 >> alloc kstat_irqs on node 0 >> alloc irq_desc for 1276 on node 0 >> alloc kstat_irqs on node 0 >> alloc irq_desc for 1275 on node 0 >> alloc kstat_irqs on node 0 >> alloc irq_desc for 1274 on node 0 >> alloc kstat_irqs on node 0 >> installing Xen timer for CPU 1 >> alloc irq_desc for 1273 on node 0 >> alloc kstat_irqs on node 0 >> alloc irq_desc for 1272 on node 0 >> alloc kstat_irqs on node 0 >> cpu 1 spinlock event irq 1272 >> lockdep: fixing up alternatives. >> SMP alternatives: switching to SMP code >> alloc irq_desc for 1271 on node 0 >> alloc kstat_irqs on node 0 >> alloc irq_desc for 1270 on node 0 >> alloc kstat_irqs on node 0 >> alloc irq_desc for 1269 on node 0 >> alloc kstat_irqs on node 0 >> alloc irq_desc for 1268 on node 0 >> alloc kstat_irqs on node 0 >> Initializing CPU#1 >> CPU: L1 I cache: 32K, L1 D cache: 32K >> CPU: L2 cache: 256K >> CPU: L3 cache: 8192K >> CPU 1/0x0 -> Node 0 >> CPU: Unsupported number of siblings 16 >> installing Xen timer for CPU 2 >> alloc irq_desc for 1267 on node 0 >> alloc kstat_irqs on node 0 >> alloc irq_desc for 1266 on node 0 >> alloc kstat_irqs on node 0 >> cpu 2 spinlock event irq 1266 >> alloc irq_desc for 1265 on node 0 >> alloc kstat_irqs on node 0 >> alloc irq_desc for 1264 on node 0 >> alloc kstat_irqs on node 0 >> alloc irq_desc for 1263 on node 0 >> alloc kstat_irqs on node 0 >> alloc irq_desc for 1262 on node 0 >> alloc kstat_irqs on node 0 >> Initializing CPU#2 >> CPU: L1 I cache: 32K, L1 D cache: 32K >> CPU: L2 cache: 256K >> CPU: L3 cache: 8192K >> CPU 2/0x0 -> Node 0 >> CPU: Unsupported number of siblings 16 >> installing Xen timer for CPU 3 >> alloc irq_desc for 1261 on node 0 >> alloc kstat_irqs on node 0 >> alloc irq_desc for 1260 on node 0 >> alloc kstat_irqs on node 0 >> cpu 3 spinlock event irq 1260 >> alloc irq_desc for 1259 on node 0 >> alloc kstat_irqs on node 0 >> alloc irq_desc for 1258 on node 0 >> alloc kstat_irqs on node 0 >> alloc irq_desc for 1257 on node 0 >> alloc kstat_irqs on node 0 >> alloc irq_desc for 1256 on node 0 >> alloc kstat_irqs on node 0 >> Initializing CPU#3 >> CPU: L1 I cache: 32K, L1 D cache: 32K >> CPU: L2 cache: 256K >> CPU: L3 cache: 8192K >> CPU 3/0x0 -> Node 0 >> CPU: Unsupported number of siblings 16 >> Brought up 4 CPUs >> Grant table initialized >> Time: 16:45:17 Date: 04/07/10 >> NET: Registered protocol family 16 >> alloc irq_desc for 1255 on node 0 >> alloc kstat_irqs on node 0 >> ACPI: bus type pci registered >> PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 >> PCI: MCFG area at e0000000 reserved in E820 >> PCI: Using MMCONFIG at e0000000 - efffffff >> PCI: Using configuration type 1 for base access >> bio: create slab<bio-0> at 0 >> ERROR: Unable to locate IOAPIC for GSI 9 >> ACPI: EC: Look up EC in DSDT >> ACPI Warning for \_SB_._OSC: Return type mismatch - found Integer, >> expected Buffer (20090903/nspredef-1006) >> \_SB_:_OSC evaluation returned wrong type >> _OSC request data:1 6 >> ACPI: Executed 1 blocks of module-level executable AML code >> ACPI: Interpreter enabled >> ACPI: (supports S0 S1 S4 S5) >> ACPI: Using IOAPIC for interrupt routing >> ACPI Warning: Incorrect checksum in table [OEMB] - 91, should be 8E >> (20090903/tbutils-314) >> ACPI Warning: Incorrect checksum in table [ ] - 7B, should be BF >> (20090903/tbutils-314) >> ACPI: No dock devices found. >> ACPI: PCI Root Bridge [PCI0] (0000:00) >> pci 0000:00:03.0: PME# supported from D0 D3hot D3cold >> pci 0000:00:03.0: PME# disabled >> pci 0000:00:05.0: PME# supported from D0 D3hot D3cold >> pci 0000:00:05.0: PME# disabled >> pci 0000:00:1a.0: reg 10 32bit mmio: [0xfb3fc000-0xfb3fc3ff] >> pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold >> pci 0000:00:1a.0: PME# disabled >> pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold >> pci 0000:00:1c.0: PME# disabled >> pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold >> pci 0000:00:1c.4: PME# disabled >> pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold >> pci 0000:00:1c.5: PME# disabled >> pci 0000:00:1d.0: reg 10 32bit mmio: [0xfb3fa000-0xfb3fa3ff] >> pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold >> pci 0000:00:1d.0: PME# disabled >> pci 0000:00:1f.2: reg 10 io port: [0xb400-0xb407] >> pci 0000:00:1f.2: reg 14 io port: [0xbc00-0xbc03] >> pci 0000:00:1f.2: reg 18 io port: [0xb880-0xb887] >> pci 0000:00:1f.2: reg 1c io port: [0xb800-0xb803] >> pci 0000:00:1f.2: reg 20 io port: [0xb480-0xb49f] >> pci 0000:00:1f.2: reg 24 32bit mmio: [0xfb3f8000-0xfb3f87ff] >> pci 0000:00:1f.2: PME# supported from D3hot >> pci 0000:00:1f.2: PME# disabled >> pci 0000:00:1f.3: reg 10 64bit mmio: [0xfb3f6000-0xfb3f60ff] >> pci 0000:00:1f.3: reg 20 io port: [0x400-0x41f] >> pci 0000:03:00.0: reg 10 32bit mmio: [0xfb420000-0xfb43ffff] >> pci 0000:03:00.0: reg 14 32bit mmio: [0xfb480000-0xfb4fffff] >> pci 0000:03:00.0: reg 18 io port: [0xcc00-0xcc1f] >> pci 0000:03:00.0: reg 1c 32bit mmio: [0xfb41c000-0xfb41ffff] >> pci 0000:03:00.0: reg 30 32bit mmio pref: [0xfb440000-0xfb47ffff] >> pci 0000:03:00.0: PME# supported from D0 D3hot D3cold >> pci 0000:03:00.0: PME# disabled >> pci 0000:00:1c.0: bridge io port: [0xc000-0xcfff] >> pci 0000:00:1c.0: bridge 32bit mmio: [0xfb400000-0xfb4fffff] >> pci 0000:04:00.0: reg 10 32bit mmio: [0xfb5e0000-0xfb5fffff] >> pci 0000:04:00.0: reg 18 io port: [0xdc00-0xdc1f] >> pci 0000:04:00.0: reg 1c 32bit mmio: [0xfb5dc000-0xfb5dffff] >> pci 0000:04:00.0: PME# supported from D0 D3hot D3cold >> pci 0000:04:00.0: PME# disabled >> pci 0000:00:1c.4: bridge io port: [0xd000-0xdfff] >> pci 0000:00:1c.4: bridge 32bit mmio: [0xfb500000-0xfb5fffff] >> pci 0000:05:00.0: reg 10 32bit mmio: [0xfb6e0000-0xfb6fffff] >> pci 0000:05:00.0: reg 18 io port: [0xec00-0xec1f] >> pci 0000:05:00.0: reg 1c 32bit mmio: [0xfb6dc000-0xfb6dffff] >> pci 0000:05:00.0: PME# supported from D0 D3hot D3cold >> pci 0000:05:00.0: PME# disabled >> pci 0000:00:1c.5: bridge io port: [0xe000-0xefff] >> pci 0000:00:1c.5: bridge 32bit mmio: [0xfb600000-0xfb6fffff] >> pci 0000:06:03.0: reg 10 32bit mmio pref: [0xfa000000-0xfaffffff] >> pci 0000:06:03.0: reg 14 32bit mmio: [0xfb7fc000-0xfb7fffff] >> pci 0000:06:03.0: reg 18 32bit mmio: [0xfb800000-0xfbffffff] >> pci 0000:00:1e.0: transparent bridge >> pci 0000:00:1e.0: bridge 32bit mmio: [0xfb700000-0xfbffffff] >> pci 0000:00:1e.0: bridge 64bit mmio pref: [0xfa000000-0xfaffffff] >> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] >> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3._PRT] >> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT] >> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR1E._PRT] >> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0ehci_hcd 0000:00:1a.0: >> port 1 high speed >> ehci_hcd 0000:00:1a.0: GetStatus port 1 status 001005 POWER sig=se0 >> PE CONNECT >> ahci 0000:00:1f.2: version 3.0 >> xen: registering gsi 19 triggering 0 polarity 1 >> alloc irq_desc for 19 on node 0 >> alloc kstat_irqs on node 0 >> xen: --> irq=19 >> ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 >> alloc irq_desc for 1247 on node 0 >> alloc kstat_irqs on node 0 >> ahci: SSS flag set, parallel bus scan disabled >> ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x3f impl >> SATA mode >> ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum >> part ems sxs apst >> ahci 0000:00:1f.2: setting latency timer to 64 >> scsi0 : ahci >> scsi1 : ahci >> scsi2 : ahci >> scsi3 : ahci >> scsi4 : ahci >> scsi5 : ahci >> ata1: SATA max UDMA/133 abar m2048@0xfb3f8000 port 0xfb3f8100 irq 1247 >> ata2: SATA max UDMA/133 abar m2048@0xfb3f8000 port 0xfb3f8180 irq 1247 >> ata3: SATA max UDMA/133 abar m2048@0xfb3f8000 port 0xfb3f8200 irq 1247 >> ata4: SATA max UDMA/133 abar m2048@0xfb3f8000 port 0xfb3f8280 irq 1247 >> ata5: SATA max UDMA/133 abar m2048@0xfb3f8000 port 0xfb3f8300 irq 1247 >> ata6: SATA max UDMA/133 abar m2048@0xfb3f8000 port 0xfb3f8380 irq 1247 >> usb 1-1: udev 2, busnum 1, minor = 1 >> usb 1-1: New USB device found, idVendor=8087, idProduct=0020 >> usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 >> usb 1-1: usb_probe_device >> usb 1-1: configuration #1 chosen from 1 choice >> usb 1-1: adding 1-1:1.0 (config #1, interface 0) >> hub 1-1:1.0: usb_probe_interface >> hub 1-1:1.0: usb_probe_interface - got id >> hub 1-1:1.0: USB hub found >> hub 1-1:1.0: 6 ports detected >> hub 1-1:1.0: standalone hub >> hub 1-1:1.0: individual port power switching >> hub 1-1:1.0: individual port over-current protection >> hub 1-1:1.0: Single TT >> hub 1-1:1.0: TT requires at most 8 FS bit times (666 ns) >> hub 1-1:1.0: Port indicators are supported >> hub 1-1:1.0: power on to power good time: 100ms >> hub 1-1:1.0: local power source is good >> hub 1-1:1.0: enabling power on all ports >> hub 2-0:1.0: state 7 ports 2 chg 0002 evt 0000 >> hub 2-0:1.0: port 1, status 0501, change 0000, 480 Mb/s >> ehci_hcd 0000:00:1d.0: port 1 high speed >> ehci_hcd 0000:00:1d.0: GetStatus port 1 status 001005 POWER sig=se0 >> PE CONNECT >> hub 1-1:1.0: port 2: status 0101 change 0001 >> usb 2-1: new high speed USB device using ehci_hcd and address 2 >> ehci_hcd 0000:00:1d.0: port 1 high speed >> ehci_hcd 0000:00:1d.0: GetStatus port 1 status 001005 POWER sig=se0 >> PE CONNECT >> usb 1-1: link qh256-0001/ffff8800bc51f9c0 start 1 [1/0 us] >> usb 2-1: udev 2, busnum 2, minor = 129 >> usb 2-1: New USB device found, idVendor=8087, idProduct=0020 >> usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 >> usb 2-1: usb_probe_device >> usb 2-1: configuration #1 chosen from 1 choice >> usb 2-1: adding 2-1:1.0 (config #1, interface 0) >> hub 2-1:1.0: usb_probe_interface >> hub 2-1:1.0: usb_probe_interface - got id >> hub 2-1:1.0: USB hub found >> hub 2-1:1.0: 8 ports detected >> hub 2-1:1.0: standalone hub >> hub 2-1:1.0: individual port power switching >> hub 2-1:1.0: individual port over-current protection >> hub 2-1:1.0: Single TT >> hub 2-1:1.0: TT requires at most 8 FS bit times (666 ns) >> hub 2-1:1.0: Port indicators are supported >> hub 2-1:1.0: power on to power good time: 100ms >> hub 2-1:1.0: local power source is good >> hub 2-1:1.0: enabling power on all ports >> hub 1-1:1.0: state 7 ports 6 chg 0004 evt 0000 >> hub 1-1:1.0: port 2, status 0101, change 0000, 12 Mb/s >> hub 1-1:1.0: port 2 not reset yet, waiting 10ms >> usb 1-1.2: new full speed USB device using ehci_hcd and address 3 >> ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) >> hub 1-1:1.0: port 2 not reset yet, waiting 10ms >> ata1.00: ATA-8: WDC WD10EADS-00P8B0, 01.00A01, max UDMA/133 >> ata1.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA >> ata1.00: configured for UDMA/133 >> scsi 0:0:0:0: Direct-Access ATA WDC WD10EADS-00P 01.0 PQ: 0 >> ANSI: 5 >> sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) >> sd 0:0:0:0: [sda] Write Protect is off >> sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 >> sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't >> support DPO or FUA >> sd 0:0:0:0: Attached scsi generic sg0 type 0 >> sda: >> usb 2-1: link qh256-0001/ffff8800bc51f6c0 start 1 [1/0 us] >> sda1 sda2 sda3 sda4 >> sd 0:0:0:0: [sda] Attached SCSI disk >> usb 1-1.2: skipped 1 descriptor after interface >> usb 1-1.2: skipped 1 descriptor after interface >> usb 1-1.2: default language 0x0409 >> usb 1-1.2: udev 3, busnum 1, minor = 2 >> usb 1-1.2: New USB device found, idVendor=0557, idProduct=2221 >> usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 >> usb 1-1.2: Product: Hermon USB hidmouse Device >> usb 1-1.2: Manufacturer: Winbond Electronics Corp >> usb 1-1.2: usb_probe_device >> usb 1-1.2: configuration #1 chosen from 1 choice >> usb 1-1.2: adding 1-1.2:1.0 (config #1, interface 0) >> usbhid 1-1.2:1.0: usb_probe_interface >> usbhid 1-1.2:1.0: usb_probe_interface - got id >> input: Winbond Electronics Corp Hermon USB hidmouse Device as >> /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input4 >> generic-usb 0003:0557:2221.0001: input,hidraw0: USB HID v1.00 Mouse >> [Winbond Electronics Corp Hermon USB hidmouse Device] on >> usb-0000:00:1a.0-1.2/input0 >> usb 1-1.2: adding 1-1.2:1.1 (config #1, interface 1) >> usbhid 1-1.2:1.1: usb_probe_interface >> usbhid 1-1.2:1.1: usb_probe_interface - got id >> input: Winbond Electronics Corp Hermon USB hidmouse Device as >> /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.1/input/input5 >> usb 1-1.2: link qh8-0601/ffff8800be6225c0 start 2 [1/2 us] >> generic-usb 0003:0557:2221.0002: input,hidraw1: USB HID v1.00 >> Keyboard [Winbond Electronics Corp Hermon USB hidmouse Device] on >> usb-0000:00:1a.0-1.2/input1 >> hub 2-1:1.0: state 7 ports 8 chg 0000 evt 0000 >> hub 1-1:1.0: state 7 ports 6 chg 0000 evt 0004 >> ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) >> ata2.00: ATA-7: SAMSUNG HD103SI, 1AG01118, max UDMA7 >> ata2.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA >> ata2.00: configured for UDMA/133 >> scsi 1:0:0:0: Direct-Access ATA SAMSUNG HD103SI 1AG0 PQ: 0 >> ANSI: 5 >> sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) >> sd 1:0:0:0: Attached scsi generic sg1 type 0 >> sd 1:0:0:0: [sdb] Write Protect is off >> sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 >> sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't >> support DPO or FUA >> sdb: sdb1 sdb2 sdb3 sdb4 >> sd 1:0:0:0: [sdb] Attached SCSI disk >> input: ImExPS/2 Generic Explorer Mouse as >> /devices/platform/i8042/serio1/input/input6 >> ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) >> ata3.00: ATA-8: WDC WD10EADS-00P8B0, 01.00A01, max UDMA/133 >> ata3.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA >> ata3.00: configured for UDMA/133 >> scsi 2:0:0:0: Direct-Access ATA WDC WD10EADS-00P 01.0 PQ: 0 >> ANSI: 5 >> sd 2:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) >> sd 2:0:0:0: Attached scsi generic sg2 type 0 >> sd 2:0:0:0: [sdc] Write Protect is off >> sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 >> sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't >> support DPO or FUA >> sdc: sdc1 sdc2 sdc3 sdc4 >> sd 2:0:0:0: [sdc] Attached SCSI disk >> hub 2-1:1.0: hub_suspend >> usb 2-1: unlink qh256-0001/ffff8800bc51f6c0 start 1 [1/0 us] >> usb 2-1: usb auto-suspend >> ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) >> ata4.00: ATA-7: SAMSUNG HD103SI, 1AG01118, max UDMA7 >> ata4.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA >> ata4.00: configured for UDMA/133 >> scsi 3:0:0:0: Direct-Access ATA SAMSUNG HD103SI 1AG0 PQ: 0 >> ANSI: 5 >> sd 3:0:0:0: [sdd] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) >> sd 3:0:0:0: Attached scsi generic sg3 type 0 >> sd 3:0:0:0: [sdd] Write Protect is off >> sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00 >> sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't >> support DPO or FUA >> sdd: sdd1 sdd2 sdd3 sdd4 >> sd 3:0:0:0: [sdd] Attached SCSI disk >> ata5: SATA link down (SStatus 0 SControl 300) >> ata6: SATA link down (SStatus 0 SControl 300) >> md: raid10 personality registered for level 10 >> Intel AES-NI instructions are not detected. >> md: md0 stopped. >> md: bind<sdb3> >> md: bind<sdc3> >> md: bind<sdd3> >> md: bind<sda3> >> md: kicking non-fresh sdd3 from array! >> md: unbind<sdd3> >> md: export_rdev(sdd3) >> md: kicking non-fresh sdb3 from array! >> md: unbind<sdb3> >> md: export_rdev(sdb3) >> raid10: raid set md0 active with 2 out of 4 devices >> md0: detected capacity change from 0 to 838860668928 >> md0: unknown partition table >> hub 2-0:1.0: hub_suspend >> usb usb2: bus auto-suspend >> ehci_hcd 0000:00:1d.0: suspend root hub >> >> Password:*********** >> EXT4-fs (dm-2): mounted filesystem with ordered data mode >> type=1404 audit(1270658817.238:2): enforcing=1 old_enforcing=0 >> auid=4294967295 ses=4294967295 >> SELinux: 8192 avtab hash slots, 162639 rules. >> SELinux: 8192 avtab hash slots, 162639 rules. >> SELinux: 8 users, 12 roles, 3092 types, 152 bools, 1 sens, 1024 cats >> SELinux: 77 classes, 162639 rules >> SELinux: Completing initialization. >> SELinux: Setting up existing superblocks. >> SELinux: initialized (dev dm-2, type ext4), uses xattr >> SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs >> SELinux: initialized (dev selinuxfs, type selinuxfs), uses >> genfs_contexts >> SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs >> SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition >> SIDs >> SELinux: initialized (dev devpts, type devpts), uses transition SIDs >> SELinux: initialized (dev inotifyfs, type inotifyfs), uses >> genfs_contexts >> SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses >> genfs_contexts >> SELinux: initialized (dev pipefs, type pipefs), uses task SIDs >> SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts >> SELinux: initialized (dev sockfs, type sockfs), uses task SIDs >> SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs >> SELinux: initialized (dev proc, type proc), uses genfs_contexts >> SELinux: initialized (dev bdev, type bdev), uses genfs_contexts >> SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts >> SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts >> type=1403 audit(1270658817.689:3): policy loaded auid=4294967295 >> ses=4294967295 >> Welcome to Fedora >> Press 'I' to enter interactive startup. >> Starting udev: udev: starting version 145 >> ACPI: SSDT 00000000bf7b0180 00F20 (v01 DpgPmm P001Ist 00000011 INTL >> 20051117) >> ACPI: SSDT 00000000bf7b10a0 004D5 (v01 PmRef P001Cst 00003001 INTL >> 20051117) >> (XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120] >> (XEN) Monitor-Mwait will be used to enter C-1 state >> (XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120] >> (XEN) Monitor-Mwait will be used to enter C-2 state >> (XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120] >> (XEN) Monitor-Mwait will be used to enter C-3 state >> ACPI: CPU-1 (power states: C1[C1] C2[C2] C3[C3]) >> e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k2 >> e1000e: Copyright (c) 1999-2008 Intel Corporation. >> xen: registering gsi 16 triggering 0 polarity 1 >> xen_allocate_pirq: returning irq 16 for gsi 16 >> xen: --> irq=16 >> Already setup the GSI :16 >> e1000e 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 >> e1000e 0000:03:00.0: setting latency timer to 64 >> alloc irq_desc for 1246 on node 0 >> alloc kstat_irqs on node 0 >> alloc irq_desc for 1245 on node 0 >> alloc kstat_irqs on node 0 >> alloc irq_desc for 1244 on node 0 >> alloc kstat_irqs on node 0 >> (XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120] >> (XEN) Monitor-Mwait will be used to enter C-1 state >> (XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120] >> (XEN) Monitor-Mwait will be used to enter C-2 state >> (XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120] >> (XEN) Monitor-Mwait will be used to enter C-3 state >> ACPI: CPU-1 (power states: C1[C1] C2[C2] C3[C3]) >> 0000:03:00.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:1b:21:4f:65:6b >> 0000:03:00.0: eth0: Intel(R) PRO/1000 Network Connection >> 0000:03:00.0: eth0: MAC: 3, PHY: 8, PBA No: e46981-003 >> xen: registering gsi 16 triggering 0 polarity 1 >> xen_allocate_pirq: returning irq 16 for gsi 16 >> xen: --> irq=16 >> Already setup the GSI :16 >> e1000e 0000:04:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 >> e1000e 0000:04:00.0: setting latency timer to 64 >> alloc irq_desc for 1243 on node 0 >> alloc kstat_irqs on node 0 >> alloc irq_desc for 1242 on node 0 >> alloc kstat_irqs on node 0 >> alloc irq_desc for 1241 on node 0 >> alloc kstat_irqs on node 0 >> (XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120] >> (XEN) Monitor-Mwait will be used to enter C-1 state >> (XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120] >> (XEN) Monitor-Mwait will be used to enter C-2 state >> (XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120] >> (XEN) Monitor-Mwait will be used to enter C-3 state >> ACPI: CPU-1 (power states: C1[C1] C2[C2] C3[C3]) >> (XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120] >> (XEN) Monitor-Mwait will be used to enter C-1 state >> (XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120] >> (XEN) Monitor-Mwait will be used to enter C-2 state >> (XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120] >> (XEN) Monitor-Mwait will be used to enter C-3 state >> ACPI: CPU-1 (power states: C1[C1] C2[C2] C3[C3]) >> 0000:04:00.0: eth1: (PCI Express:2.5GB/s:Width x1) 00:30:48:dd:eb:66 >> 0000:04:00.0: eth1: Intel(R) PRO/1000 Network Connection >> 0000:04:00.0: eth1: MAC: 3, PHY: 8, PBA No: 0101ff-0ff >> xen: registering gsi 17 triggering 0 polarity 1 >> xen_allocate_pirq: returning irq 17 for gsi 17 >> xen: --> irq=17 >> Already setup the GSI :17 >> e1000e 0000:05:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 >> e1000e 0000:05:00.0: setting latency timer to 64 >> alloc irq_desc for 1240 on node 0 >> alloc kstat_irqs on node 0 >> alloc irq_desc for 1239 on node 0 >> alloc kstat_irqs on node 0 >> alloc irq_desc for 1238 on node 0 >> alloc kstat_irqs on node 0 >> 0000:05:00.0: eth2: (PCI Express:2.5GB/s:Width x1) 00:30:48:dd:eb:67 >> 0000:05:00.0: eth2: Intel(R) PRO/1000 Network Connection >> 0000:05:00.0: eth2: MAC: 3, PHY: 8, PBA No: 0101ff-0ff >> udev: renamed network interface eth2 to eth1 >> udev: renamed network interface eth0 to eth2 >> udev: renamed network interface eth1_rename to eth0 >> mdadm: /dev/md0 is already in use. >> Key slot 0 unlocked. >> Key slot 0 unlocked. >> device-mapper: multipath: version 1.1.0 loaded >> Setting up Logical Volume Management: 14 logical volume(s) in >> volume group "vg_lilith-raid" now active >> [ OK ] >> Checking filesystems >> Checking all file systems. >> [/sbin/fsck.ext4 (1) -- /] fsck.ext4 -a /dev/mapper/vg_lilith--raid-root >> /dev/mapper/vg_lilith--raid-root contains a file system with errors, >> check forced. >> /dev/mapper/vg_lilith--raid-root: 343615/2564096 files (0.2% >> non-contiguous), 2390774/10240000 blocks >> [/sbin/fsck.ext4 (1) -- /boot] fsck.ext4 -a /dev/sda2 >> [/sbin/fsck.ext4 (2) -- /boot-spare] fsck.ext4 -a /dev/sdb2 >> /dev/sdb2: clean, 11/66384 files, 12695/265072 blocks >> /dev/sda2: clean, 89/66384 files, 69878/265072 blocks >> [/sbin/fsck.ext4 (1) -- /home] fsck.ext4 -a >> /dev/mapper/luks-11eb0145-088a-4c13-acf4-9784e82bb1e3 >> /dev/mapper/luks-11eb0145-088a-4c13-acf4-9784e82bb1e3: clean, >> 506715/12804096 files, 10193956/51199495 blocks >> [/sbin/fsck.ext4 (1) -- /var] fsck.ext4 -a >> /dev/mapper/luks-37e6b844-a112-427c-be60-ae6f4d9c5041 >> /dev/mapper/luks-37e6b844-a112-427c-be60-ae6f4d9c5041: clean, >> 21026/5120000 files, 490586/20479495 blocks >> [ OK ] >> Remounting root filesystem in read-write mode: [ OK ] >> Mounting local filesystems: EXT4-fs (sda2): mounted filesystem with >> ordered data mode >> SELinux: initialized (dev sda2, type ext4), uses xattr >> EXT4-fs (sdb2): mounted filesystem with ordered data mode >> SELinux: initialized (dev sdb2, type ext4), uses xattr >> EXT4-fs (dm-15): mounted filesystem with ordered data mode >> SELinux: initialized (dev dm-15, type ext4), uses xattr >> EXT4-fs (dm-16): mounted filesystem with ordered data mode >> SELinux: initialized (dev dm-16, type ext4), uses xattr >> SELinux: initialized (dev xenfs, type xenfs), uses genfs_contexts >> [ OK ] >> Enabling local filesystem quotas: [ OK ] >> Enabling /etc/fstab swaps: Adding 16381972k swap on >> /dev/mapper/luks-2aac27aa-0bb6-46cc-8a7a-83af1ca296a2. Priority:-1 >> extents:1 across:16381972k >> [ OK ] >> SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses >> genfs_contexts >> Entering non-interactive startup >> Applying Intel CPU microcode update: platform microcode: firmware: >> requesting intel-ucode/06-1e-05 >> platform microcode: firmware: requesting intel-ucode/06-1e-05 >> platform microcode: firmware: requesting intel-ucode/06-1e-05 >> platform microcode: firmware: requesting intel-ucode/06-1e-05 >> Microcode Update Driver: v2.00<tigran@aivazian.fsnet.co.uk>, Peter Oruba >> Microcode Update Driver: v2.00 removed. >> Starting monitoring for VG vg_lilith-raid: 14 logical volume(s) in >> volume group "vg_lilith-raid" monitored >> [ OK ] >> ip6tables: Applying firewall rules: [ OK ] >> ip6tables: Loading additional modules: nf_conntrack_netbios_ns [ OK ] >> Starting auditd: [ OK ] >> Starting portreserve: [ OK ] >> Starting system logger: [ OK ] >> Starting irqbalance: [ OK ] >> Starting rpcbind: [ OK ] >> Starting mdmonitor: [ OK ] >> Starting system message bus: [ OK ] >> Starting Avahi daemon... [ OK ] >> Starting NFS statd: [ OK ] >> Starting RPC idmapd: FATAL: Module sunrpc not found. >> FATAL: Error running install command for sunrpc >> Error: RPC MTAB does not exist. >> Starting cups: [ OK ] >> Starting acpi daemon: [ OK ] >> Starting HAL daemon: [ OK ] >> Starting PC/SC smart card daemon (pcscd): [ OK ] >> Retrigger failed udev events[ OK ] >> Setting network parameters... [ OK ] >> Starting NetworkManager daemon: [ OK ] >> Enabling Bluetooth devices: >> Starting sshd: [ OK ] >> ADDRCONF(NETDEV_UP): eth2: link is not ready >> ntpdate: Synchronizing with time server: ADDRCONF(NETDEV_UP): eth0: >> link is not ready >> ADDRCONF(NETDEV_UP): eth1: link is not ready >> [FAILED] >> Starting ntpd: [ OK ] >> Starting abrt daemon: [ OK ] >> usb 1-1.2: link qh8-0601/ffff8800b58ba740 start 3 [1/2 us] >> >> [ OK ] crond: [ OK ] >> Enabling monthly Smolt checkin: [ OK ] >> [ OK ] atd: [ OK ] >> Starting libvirtd daemon: [ OK ] >> Bridge firewalling registered >> virbr0: starting userspace STP failed, starting kernel STP >> e1000e: eth1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX >> ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready >> e1000e: eth2 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX >> ADDRCONF(NETDEV_CHANGE): eth2: link becomes ready >> e1000e: eth0 NICMbps Full Duplex, Flow Control: RX/TX >> ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready >> SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs >> SELinux: initialized (dev proc, type proc), uses genfs_contexts >> SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs >> >> Fedora release 12 (Constantine) >> Kernel 2.6.32.11 on an x86_64 (/dev/hvc0) >> >> lilith.goop.org login: usb usb2: usb auto-resume >> ehci_hcd 0000:00:1d.0: resume root hub >> hub 2-0:1.0: hub_resume >> hub 2-0:1.0: port 1: status 0507 change 0000 >> usb 2-1: usb auto-resume >> hub 2-0:1.0: state 7 ports 2 chg 0000 evt 0000 >> ehci_hcd 0000:00:1d.0: GetStatus port 1 status 001005 POWER sig=se0 >> PE CONNECT >> usb 2-1: finish resume >> hub 2-1:1.0: hub_resume >> ehci_hcd 0000:00:1d.0: reused qh ffff8800bc51f6c0 schedule >> usb 2-1: link qh256-0001/ffff8800bc51f6c0 start 1 [1/0 us] >> hub 2-1:1.0: state 7 ports >> >> > ^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2010-04-08 16:58 UTC | newest] Thread overview: 7+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2010-04-06 22:38 New DMAR errors in Xen 4.1 Jeremy Fitzhardinge 2010-04-07 0:00 ` Jeremy Fitzhardinge 2010-04-07 2:50 ` Weidong Han 2010-04-07 8:31 ` Cui, Dexuan 2010-04-07 16:55 ` Jeremy Fitzhardinge 2010-04-08 2:32 ` Weidong Han 2010-04-08 16:58 ` Jeremy Fitzhardinge
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.