* AT91: how to use additional 128mb RAM on the at91sam9g45ek?
@ 2010-04-22 14:42 Yegor Yefremov
0 siblings, 0 replies; only message in thread
From: Yegor Yefremov @ 2010-04-22 14:42 UTC (permalink / raw)
To: linux-arm-kernel
I use at91sam9g45-ek with the kernel 2.6.33. Following this post http://www.at91.com/forum/viewtopic.php/f,12/t,18589/p,30450/ I configured 256Mb in U-Boot, but when Linux kernel starts it ignores the second area saying:
CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=00053177
CPU: VIVT data cache, VIVT instruction cache
Machine: Atmel AT91SAM9G45-EKES
Memory policy: ECC disabled, Data cache writeback
Ignoring RAM at 20000000-27ffffff (vmalloc region overlap).
Clocks: CPU 400 MHz, master 133 MHz, main 12.000 MHz
The first area 0x70000000-0x77ffffff will be mapped to 0xc0000000
the second area 20000000-27ffffff will be mapped to 0x70000000, that is smaller than 0xc0000000 and thus invalid.
What can I do to use RAM from both banks to get 256Mb of RAM?
Best regards,
Yegor
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2010-04-22 14:42 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2010-04-22 14:42 AT91: how to use additional 128mb RAM on the at91sam9g45ek? Yegor Yefremov
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.