All of lore.kernel.org
 help / color / mirror / Atom feed
From: Jonathan Cameron <jic23@cam.ac.uk>
To: "Datta, Shubhrajyoti" <shubhrajyoti@ti.com>
Cc: "linux-omap@vger.kernel.org" <linux-omap@vger.kernel.org>,
	"linux-input@vger.kernel.org" <linux-input@vger.kernel.org>,
	LM Sensors <lm-sensors@lm-sensors.org>
Subject: Re: [RFC][PATCH] Add support for TMP105
Date: Tue, 25 May 2010 13:21:27 +0100	[thread overview]
Message-ID: <4BFBC0C7.2010401@cam.ac.uk> (raw)
In-Reply-To: <0680EC522D0CC943BC586913CF3768C003B32B4012@dbde02.ent.ti.com>

On 05/25/10 13:12, Datta, Shubhrajyoti wrote:
> 
> Adds the driver support for the TMP105 temperature sensor device. The
> interface is I2C.The driver supports the read of the temperature values.
> 
Still on the wrong list... cc'ing lm-sensors...
Please check MAINTAINERS for the correct mailing list for patches.


> Signed-off-by: Shubhrajyoti D <shubhrajyoti@ti.com>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
> ---
>  drivers/hwmon/Kconfig |    3 ++-
>  drivers/hwmon/lm75.c  |    2 ++
>  2 files changed, 4 insertions(+), 1 deletions(-)
> 
> diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
> index a4a5352..7a137d5 100644
> --- a/drivers/hwmon/Kconfig
> +++ b/drivers/hwmon/Kconfig
> @@ -483,7 +483,8 @@ config SENSORS_LM75
>  		- NXP's LM75A
>  		- ST Microelectronics STDS75
>  		- TelCom (now Microchip) TCN75
> -		- Texas Instruments TMP100, TMP101, TMP75, TMP175, TMP275
> +		- Texas Instruments TMP100, TMP101, TMP105, TMP75, TMP175, 
> +			TMP275
>  
>  	  This driver supports driver model based binding through board
>  	  specific I2C device tables.
> diff --git a/drivers/hwmon/lm75.c b/drivers/hwmon/lm75.c
> index 8ae2cfe..5646342 100644
> --- a/drivers/hwmon/lm75.c
> +++ b/drivers/hwmon/lm75.c
> @@ -46,6 +46,7 @@ enum lm75_type {		/* keep sorted in alphabetical order */
>  	tcn75,
>  	tmp100,
>  	tmp101,
> +	tmp105,
>  	tmp175,
>  	tmp275,
>  	tmp75,
> @@ -220,6 +221,7 @@ static const struct i2c_device_id lm75_ids[] = {
>  	{ "tcn75", tcn75, },
>  	{ "tmp100", tmp100, },
>  	{ "tmp101", tmp101, },
> +	{ "tmp105", tmp105, },
>  	{ "tmp175", tmp175, },
>  	{ "tmp275", tmp275, },
>  	{ "tmp75", tmp75, },


WARNING: multiple messages have this Message-ID (diff)
From: Jonathan Cameron <jic23@cam.ac.uk>
To: "Datta, Shubhrajyoti" <shubhrajyoti@ti.com>
Cc: "linux-omap@vger.kernel.org" <linux-omap@vger.kernel.org>,
	"linux-input@vger.kernel.org" <linux-input@vger.kernel.org>,
	LM Sensors <lm-sensors@lm-sensors.org>
Subject: Re: [lm-sensors] [RFC][PATCH] Add support for TMP105
Date: Tue, 25 May 2010 12:21:27 +0000	[thread overview]
Message-ID: <4BFBC0C7.2010401@cam.ac.uk> (raw)
In-Reply-To: <0680EC522D0CC943BC586913CF3768C003B32B4012@dbde02.ent.ti.com>

On 05/25/10 13:12, Datta, Shubhrajyoti wrote:
> 
> Adds the driver support for the TMP105 temperature sensor device. The
> interface is I2C.The driver supports the read of the temperature values.
> 
Still on the wrong list... cc'ing lm-sensors...
Please check MAINTAINERS for the correct mailing list for patches.


> Signed-off-by: Shubhrajyoti D <shubhrajyoti@ti.com>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
> ---
>  drivers/hwmon/Kconfig |    3 ++-
>  drivers/hwmon/lm75.c  |    2 ++
>  2 files changed, 4 insertions(+), 1 deletions(-)
> 
> diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
> index a4a5352..7a137d5 100644
> --- a/drivers/hwmon/Kconfig
> +++ b/drivers/hwmon/Kconfig
> @@ -483,7 +483,8 @@ config SENSORS_LM75
>  		- NXP's LM75A
>  		- ST Microelectronics STDS75
>  		- TelCom (now Microchip) TCN75
> -		- Texas Instruments TMP100, TMP101, TMP75, TMP175, TMP275
> +		- Texas Instruments TMP100, TMP101, TMP105, TMP75, TMP175, 
> +			TMP275
>  
>  	  This driver supports driver model based binding through board
>  	  specific I2C device tables.
> diff --git a/drivers/hwmon/lm75.c b/drivers/hwmon/lm75.c
> index 8ae2cfe..5646342 100644
> --- a/drivers/hwmon/lm75.c
> +++ b/drivers/hwmon/lm75.c
> @@ -46,6 +46,7 @@ enum lm75_type {		/* keep sorted in alphabetical order */
>  	tcn75,
>  	tmp100,
>  	tmp101,
> +	tmp105,
>  	tmp175,
>  	tmp275,
>  	tmp75,
> @@ -220,6 +221,7 @@ static const struct i2c_device_id lm75_ids[] = {
>  	{ "tcn75", tcn75, },
>  	{ "tmp100", tmp100, },
>  	{ "tmp101", tmp101, },
> +	{ "tmp105", tmp105, },
>  	{ "tmp175", tmp175, },
>  	{ "tmp275", tmp275, },
>  	{ "tmp75", tmp75, },


_______________________________________________
lm-sensors mailing list
lm-sensors@lm-sensors.org
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors

  reply	other threads:[~2010-05-25 12:21 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2010-05-25 12:12 [RFC][PATCH] Add support for TMP105 Datta, Shubhrajyoti
2010-05-25 12:21 ` Jonathan Cameron [this message]
2010-05-25 12:21   ` [lm-sensors] " Jonathan Cameron
2010-05-26  6:53   ` Jean Delvare
2010-05-26  6:53     ` [lm-sensors] " Jean Delvare

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4BFBC0C7.2010401@cam.ac.uk \
    --to=jic23@cam.ac.uk \
    --cc=linux-input@vger.kernel.org \
    --cc=linux-omap@vger.kernel.org \
    --cc=lm-sensors@lm-sensors.org \
    --cc=shubhrajyoti@ti.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.