All of lore.kernel.org
 help / color / mirror / Atom feed
From: Scott McNutt <smcnutt@psyent.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 1/6 v4] nios2: add gpio support
Date: Tue, 25 May 2010 15:39:35 -0400	[thread overview]
Message-ID: <4BFC2777.3000606@psyent.com> (raw)
In-Reply-To: <1272598458-17946-2-git-send-email-thomas@wytron.com.tw>

Applied to:

   git://git.denx.de/u-boot-nios.git next

Thanks,
--Scott

Thomas Chou wrote:
> This patch adds driver for a trivial gpio core, which is described
> in http://nioswiki.com/GPIO. It is used for gpio led and nand flash
> interface in u-boot.
> 
> When CONFIG_SYS_GPIO_BASE is not defined, board may provide
> its own driver.
> 
> Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
> ---
> v4: remove () from gpio when it is not in a macro.
> v3: arch dir reorganized.
> 
>  arch/nios2/include/asm/gpio.h |   52 +++++++++++++++++++++++++++++++++++++++++
>  1 files changed, 52 insertions(+), 0 deletions(-)
>  create mode 100644 arch/nios2/include/asm/gpio.h
> 
> diff --git a/arch/nios2/include/asm/gpio.h b/arch/nios2/include/asm/gpio.h
> new file mode 100644
> index 0000000..76c425e
> --- /dev/null
> +++ b/arch/nios2/include/asm/gpio.h
> @@ -0,0 +1,52 @@
> +/*
> + * nios2 gpio driver
> + *
> + * This gpio core is described in http://nioswiki.com/GPIO
> + * bit[0] data
> + * bit[1] output enable
> + *
> + * when CONFIG_SYS_GPIO_BASE is not defined, board may provide
> + * its own driver.
> + *
> + * Copyright (C) 2010 Thomas Chou <thomas@wytron.com.tw>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +
> +#ifndef _ASM_NIOS2_GPIO_H_
> +#define _ASM_NIOS2_GPIO_H_
> +
> +#ifdef CONFIG_SYS_GPIO_BASE
> +#include <asm/io.h>
> +
> +static inline int gpio_direction_input(unsigned gpio)
> +{
> +	writel(1, CONFIG_SYS_GPIO_BASE + (gpio << 2));
> +	return 0;
> +}
> +
> +static inline int gpio_direction_output(unsigned gpio, int value)
> +{
> +	writel(value ? 3 : 2, CONFIG_SYS_GPIO_BASE + (gpio << 2));
> +	return 0;
> +}
> +
> +static inline int gpio_get_value(unsigned gpio)
> +{
> +	return readl(CONFIG_SYS_GPIO_BASE + (gpio << 2));
> +}
> +
> +static inline void gpio_set_value(unsigned gpio, int value)
> +{
> +	writel(value ? 3 : 2, CONFIG_SYS_GPIO_BASE + (gpio << 2));
> +}
> +#else
> +extern int gpio_direction_input(unsigned gpio);
> +extern int gpio_direction_output(unsigned gpio, int value);
> +extern int gpio_get_value(unsigned gpio);
> +extern void gpio_set_value(unsigned gpio, int value);
> +#endif /* CONFIG_SYS_GPIO_BASE */
> +
> +#endif /* _ASM_NIOS2_GPIO_H_ */

  parent reply	other threads:[~2010-05-25 19:39 UTC|newest]

Thread overview: 49+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2010-03-27  4:54 [U-Boot] [PATCH] nios2: add gpio based status led driver Thomas Chou
2010-04-20 13:19 ` Scott McNutt
2010-04-20 15:05   ` Thomas Chou
2010-04-20 16:19     ` Scott McNutt
2010-04-21  0:33       ` Thomas Chou
2010-04-21  0:45 ` [U-Boot] [PATCH v2] misc: " Thomas Chou
2010-04-24 19:23   ` Wolfgang Denk
2010-04-24 22:07     ` Thomas Chou
2010-04-24 22:32       ` Wolfgang Denk
2010-04-24 22:59         ` Thomas Chou
2010-04-25  0:48           ` Scott McNutt
2010-04-25 18:15             ` Wolfgang Denk
2010-04-25 18:14           ` Wolfgang Denk
2010-04-28  3:51             ` Thomas Chou
2010-05-04 22:30               ` Wolfgang Denk
2010-05-04 22:53                 ` Scott McNutt
2010-05-05  0:09                 ` Thomas Chou
2010-04-30  3:34             ` [U-Boot] [PATCH 0/6] add gpio_led and altera_spi drivers Thomas Chou
2010-04-30  3:34             ` [U-Boot] [PATCH 1/6 v4] nios2: add gpio support Thomas Chou
2010-05-21 14:39               ` [U-Boot] [Nios2-dev] " Ian Abbott
2010-05-25 19:39               ` Scott McNutt [this message]
2010-04-30  3:34             ` [U-Boot] [PATCH 2/6 v2] misc: add gpio based status led driver Thomas Chou
2010-05-21 14:40               ` [U-Boot] [Nios2-dev] " Ian Abbott
2010-05-25 19:39               ` [U-Boot] " Scott McNutt
2010-04-30  3:34             ` [U-Boot] [PATCH 3/6 v3] nios2: add gpio support to nios2-generic board Thomas Chou
2010-04-30 14:24               ` Scott McNutt
2010-04-30 15:21                 ` Thomas Chou
2010-04-30 15:35                   ` Scott McNutt
2010-05-21 14:41               ` [U-Boot] [Nios2-dev] " Ian Abbott
2010-05-25 19:40               ` [U-Boot] " Scott McNutt
2010-04-30  3:34             ` [U-Boot] [PATCH 4/6 v10] spi: add altera spi controller support Thomas Chou
2010-05-21 14:43               ` [U-Boot] [Nios2-dev] " Ian Abbott
2010-05-25 19:40               ` [U-Boot] " Scott McNutt
2010-04-30  3:34             ` [U-Boot] [PATCH 5/6 v2] spi_flash: support old STMicro parts with RES Thomas Chou
2010-04-30 12:48               ` Mike Frysinger
2010-04-30 13:15                 ` Thomas Chou
2010-04-30 13:11               ` [U-Boot] [PATCH 5/6 v3] " Thomas Chou
2010-04-30 13:25                 ` Mike Frysinger
2010-05-05  7:21                 ` Mike Frysinger
2010-05-05  7:34                   ` Thomas Chou
2010-05-05 19:57                   ` Wolfgang Denk
2010-05-05 21:40                     ` Mike Frysinger
2010-05-06  0:20                     ` Thomas Chou
2010-04-30  3:34             ` [U-Boot] [PATCH 6/6 v3] nios2: add spi flash support to nios2-generic board Thomas Chou
2010-05-21 14:44               ` [U-Boot] [Nios2-dev] " Ian Abbott
2010-05-25 19:52               ` [U-Boot] " Scott McNutt
2010-04-27  3:29   ` [U-Boot] [PATCH] nios2: add epcs, gpio led and mmc_spi to nios2-generic Thomas Chou
2010-04-28  3:08     ` [U-Boot] [PATCH v2] " Thomas Chou
2010-06-09  4:27   ` [U-Boot] [PATCH v2] misc: add gpio based status led driver Mike Frysinger

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4BFC2777.3000606@psyent.com \
    --to=smcnutt@psyent.com \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.