* [ath9k-devel] [PATCH]wireless:ath9k Fix ath_print in xmit.c @ 2010-05-26 16:49 ` Justin P. Mattock 0 siblings, 0 replies; 18+ messages in thread From: Justin P. Mattock @ 2010-05-26 16:49 UTC (permalink / raw) To: ath9k-devel ath_print in xmit.c should say "Reseting hardware" instead of Reaseting HAL!(since HAL is being fazed out). dmesg shows: [ 8660.899624] ath: Failed to stop TX DMA in 100 msec after killing last frame [ 8660.899676] ath: Unable to stop TxDMA. Reset HAL! Signed-off-by: Justin P. Mattock <justinmattock@gmail.com> --- drivers/net/wireless/ath/ath9k/xmit.c | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-) diff --git a/drivers/net/wireless/ath/ath9k/xmit.c b/drivers/net/wireless/ath/ath9k/xmit.c index 3db1917..2a0558e 100644 --- a/drivers/net/wireless/ath/ath9k/xmit.c +++ b/drivers/net/wireless/ath/ath9k/xmit.c @@ -1198,7 +1198,7 @@ void ath_drain_all_txq(struct ath_softc *sc, bool retry_tx) int r; ath_print(common, ATH_DBG_FATAL, - "Unable to stop TxDMA. Reset HAL!\n"); + "Unable to stop TxDMA. Reseting hardware!\n"); spin_lock_bh(&sc->sc_resetlock); r = ath9k_hw_reset(ah, sc->sc_ah->curchan, false); -- 1.6.5.GIT ^ permalink raw reply related [flat|nested] 18+ messages in thread
* [PATCH]wireless:ath9k Fix ath_print in xmit.c @ 2010-05-26 16:49 ` Justin P. Mattock 0 siblings, 0 replies; 18+ messages in thread From: Justin P. Mattock @ 2010-05-26 16:49 UTC (permalink / raw) To: ath9k-devel; +Cc: mcgrog, linux-kernel, Justin P. Mattock ath_print in xmit.c should say "Reseting hardware" instead of Reaseting HAL!(since HAL is being fazed out). dmesg shows: [ 8660.899624] ath: Failed to stop TX DMA in 100 msec after killing last frame [ 8660.899676] ath: Unable to stop TxDMA. Reset HAL! Signed-off-by: Justin P. Mattock <justinmattock@gmail.com> --- drivers/net/wireless/ath/ath9k/xmit.c | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-) diff --git a/drivers/net/wireless/ath/ath9k/xmit.c b/drivers/net/wireless/ath/ath9k/xmit.c index 3db1917..2a0558e 100644 --- a/drivers/net/wireless/ath/ath9k/xmit.c +++ b/drivers/net/wireless/ath/ath9k/xmit.c @@ -1198,7 +1198,7 @@ void ath_drain_all_txq(struct ath_softc *sc, bool retry_tx) int r; ath_print(common, ATH_DBG_FATAL, - "Unable to stop TxDMA. Reset HAL!\n"); + "Unable to stop TxDMA. Reseting hardware!\n"); spin_lock_bh(&sc->sc_resetlock); r = ath9k_hw_reset(ah, sc->sc_ah->curchan, false); -- 1.6.5.GIT ^ permalink raw reply related [flat|nested] 18+ messages in thread
* [ath9k-devel] [PATCH]wireless:ath9k Fix ath_print in xmit.c 2010-05-26 16:49 ` Justin P. Mattock @ 2010-05-26 17:05 ` Luis R. Rodriguez -1 siblings, 0 replies; 18+ messages in thread From: Luis R. Rodriguez @ 2010-05-26 17:05 UTC (permalink / raw) To: ath9k-devel On Wed, May 26, 2010 at 9:49 AM, Justin P. Mattock <justinmattock@gmail.com> wrote: > ath_print in xmit.c should say "Reseting hardware" > instead of Reaseting HAL!(since HAL is being fazed out). > dmesg shows: > [ 8660.899624] ath: Failed to stop TX DMA in 100 msec after killing last frame > [ 8660.899676] ath: Unable to stop TxDMA. Reset HAL! > > > ?Signed-off-by: Justin P. Mattock <justinmattock@gmail.com> > > --- > ?drivers/net/wireless/ath/ath9k/xmit.c | ? ?2 +- > ?1 files changed, 1 insertions(+), 1 deletions(-) > > diff --git a/drivers/net/wireless/ath/ath9k/xmit.c b/drivers/net/wireless/ath/ath9k/xmit.c > index 3db1917..2a0558e 100644 > --- a/drivers/net/wireless/ath/ath9k/xmit.c > +++ b/drivers/net/wireless/ath/ath9k/xmit.c > @@ -1198,7 +1198,7 @@ void ath_drain_all_txq(struct ath_softc *sc, bool retry_tx) > ? ? ? ? ? ? ? ?int r; > > ? ? ? ? ? ? ? ?ath_print(common, ATH_DBG_FATAL, > - ? ? ? ? ? ? ? ? ? ? ? ? "Unable to stop TxDMA. Reset HAL!\n"); > + ? ? ? ? ? ? ? ? ? ? ? ? "Unable to stop TxDMA. Reseting hardware!\n"); Thanks for the patch but you need to send this to John, cc linux-wireless. Luis ^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: [ath9k-devel] [PATCH]wireless:ath9k Fix ath_print in xmit.c @ 2010-05-26 17:05 ` Luis R. Rodriguez 0 siblings, 0 replies; 18+ messages in thread From: Luis R. Rodriguez @ 2010-05-26 17:05 UTC (permalink / raw) To: Justin P. Mattock; +Cc: ath9k-devel, linux-kernel, mcgrog On Wed, May 26, 2010 at 9:49 AM, Justin P. Mattock <justinmattock@gmail.com> wrote: > ath_print in xmit.c should say "Reseting hardware" > instead of Reaseting HAL!(since HAL is being fazed out). > dmesg shows: > [ 8660.899624] ath: Failed to stop TX DMA in 100 msec after killing last frame > [ 8660.899676] ath: Unable to stop TxDMA. Reset HAL! > > > Signed-off-by: Justin P. Mattock <justinmattock@gmail.com> > > --- > drivers/net/wireless/ath/ath9k/xmit.c | 2 +- > 1 files changed, 1 insertions(+), 1 deletions(-) > > diff --git a/drivers/net/wireless/ath/ath9k/xmit.c b/drivers/net/wireless/ath/ath9k/xmit.c > index 3db1917..2a0558e 100644 > --- a/drivers/net/wireless/ath/ath9k/xmit.c > +++ b/drivers/net/wireless/ath/ath9k/xmit.c > @@ -1198,7 +1198,7 @@ void ath_drain_all_txq(struct ath_softc *sc, bool retry_tx) > int r; > > ath_print(common, ATH_DBG_FATAL, > - "Unable to stop TxDMA. Reset HAL!\n"); > + "Unable to stop TxDMA. Reseting hardware!\n"); Thanks for the patch but you need to send this to John, cc linux-wireless. Luis ^ permalink raw reply [flat|nested] 18+ messages in thread
* [ath9k-devel] [PATCH]wireless:ath9k Fix ath_print in xmit.c 2010-05-26 17:05 ` Luis R. Rodriguez @ 2010-05-26 17:08 ` Justin P. Mattock -1 siblings, 0 replies; 18+ messages in thread From: Justin P. Mattock @ 2010-05-26 17:08 UTC (permalink / raw) To: ath9k-devel On 05/26/2010 10:05 AM, Luis R. Rodriguez wrote: > On Wed, May 26, 2010 at 9:49 AM, Justin P. Mattock > <justinmattock@gmail.com> wrote: > >> ath_print in xmit.c should say "Reseting hardware" >> instead of Reaseting HAL!(since HAL is being fazed out). >> dmesg shows: >> [ 8660.899624] ath: Failed to stop TX DMA in 100 msec after killing last frame >> [ 8660.899676] ath: Unable to stop TxDMA. Reset HAL! >> >> >> Signed-off-by: Justin P. Mattock<justinmattock@gmail.com> >> >> --- >> drivers/net/wireless/ath/ath9k/xmit.c | 2 +- >> 1 files changed, 1 insertions(+), 1 deletions(-) >> >> diff --git a/drivers/net/wireless/ath/ath9k/xmit.c b/drivers/net/wireless/ath/ath9k/xmit.c >> index 3db1917..2a0558e 100644 >> --- a/drivers/net/wireless/ath/ath9k/xmit.c >> +++ b/drivers/net/wireless/ath/ath9k/xmit.c >> @@ -1198,7 +1198,7 @@ void ath_drain_all_txq(struct ath_softc *sc, bool retry_tx) >> int r; >> >> ath_print(common, ATH_DBG_FATAL, >> - "Unable to stop TxDMA. Reset HAL!\n"); >> + "Unable to stop TxDMA. Reseting hardware!\n"); >> > Thanks for the patch but you need to send this to John, cc linux-wireless. > > Luis > > I'll resend with the proper Cc's Justin P. mattock ^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: [ath9k-devel] [PATCH]wireless:ath9k Fix ath_print in xmit.c @ 2010-05-26 17:08 ` Justin P. Mattock 0 siblings, 0 replies; 18+ messages in thread From: Justin P. Mattock @ 2010-05-26 17:08 UTC (permalink / raw) To: Luis R. Rodriguez; +Cc: ath9k-devel, linux-kernel, mcgrog On 05/26/2010 10:05 AM, Luis R. Rodriguez wrote: > On Wed, May 26, 2010 at 9:49 AM, Justin P. Mattock > <justinmattock@gmail.com> wrote: > >> ath_print in xmit.c should say "Reseting hardware" >> instead of Reaseting HAL!(since HAL is being fazed out). >> dmesg shows: >> [ 8660.899624] ath: Failed to stop TX DMA in 100 msec after killing last frame >> [ 8660.899676] ath: Unable to stop TxDMA. Reset HAL! >> >> >> Signed-off-by: Justin P. Mattock<justinmattock@gmail.com> >> >> --- >> drivers/net/wireless/ath/ath9k/xmit.c | 2 +- >> 1 files changed, 1 insertions(+), 1 deletions(-) >> >> diff --git a/drivers/net/wireless/ath/ath9k/xmit.c b/drivers/net/wireless/ath/ath9k/xmit.c >> index 3db1917..2a0558e 100644 >> --- a/drivers/net/wireless/ath/ath9k/xmit.c >> +++ b/drivers/net/wireless/ath/ath9k/xmit.c >> @@ -1198,7 +1198,7 @@ void ath_drain_all_txq(struct ath_softc *sc, bool retry_tx) >> int r; >> >> ath_print(common, ATH_DBG_FATAL, >> - "Unable to stop TxDMA. Reset HAL!\n"); >> + "Unable to stop TxDMA. Reseting hardware!\n"); >> > Thanks for the patch but you need to send this to John, cc linux-wireless. > > Luis > > I'll resend with the proper Cc's Justin P. mattock ^ permalink raw reply [flat|nested] 18+ messages in thread
* [ath9k-devel] [PATCH]wireless:ath9k Fix ath_print in xmit.c 2010-05-26 17:05 ` Luis R. Rodriguez @ 2010-05-26 17:16 ` Justin P. Mattock -1 siblings, 0 replies; 18+ messages in thread From: Justin P. Mattock @ 2010-05-26 17:16 UTC (permalink / raw) To: ath9k-devel On 05/26/2010 10:05 AM, Luis R. Rodriguez wrote: > On Wed, May 26, 2010 at 9:49 AM, Justin P. Mattock > <justinmattock@gmail.com> wrote: > >> ath_print in xmit.c should say "Reseting hardware" >> instead of Reaseting HAL!(since HAL is being fazed out). >> dmesg shows: >> [ 8660.899624] ath: Failed to stop TX DMA in 100 msec after killing last frame >> [ 8660.899676] ath: Unable to stop TxDMA. Reset HAL! >> >> >> Signed-off-by: Justin P. Mattock<justinmattock@gmail.com> >> >> --- >> drivers/net/wireless/ath/ath9k/xmit.c | 2 +- >> 1 files changed, 1 insertions(+), 1 deletions(-) >> >> diff --git a/drivers/net/wireless/ath/ath9k/xmit.c b/drivers/net/wireless/ath/ath9k/xmit.c >> index 3db1917..2a0558e 100644 >> --- a/drivers/net/wireless/ath/ath9k/xmit.c >> +++ b/drivers/net/wireless/ath/ath9k/xmit.c >> @@ -1198,7 +1198,7 @@ void ath_drain_all_txq(struct ath_softc *sc, bool retry_tx) >> int r; >> >> ath_print(common, ATH_DBG_FATAL, >> - "Unable to stop TxDMA. Reset HAL!\n"); >> + "Unable to stop TxDMA. Reseting hardware!\n"); >> > Thanks for the patch but you need to send this to John, cc linux-wireless. > > Luis > > alright resent with the other patch I had kicking around.. (hopefully the right Cc's) cheers, Justin P. Mattock ^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: [ath9k-devel] [PATCH]wireless:ath9k Fix ath_print in xmit.c @ 2010-05-26 17:16 ` Justin P. Mattock 0 siblings, 0 replies; 18+ messages in thread From: Justin P. Mattock @ 2010-05-26 17:16 UTC (permalink / raw) To: Luis R. Rodriguez; +Cc: ath9k-devel, linux-kernel, mcgrog On 05/26/2010 10:05 AM, Luis R. Rodriguez wrote: > On Wed, May 26, 2010 at 9:49 AM, Justin P. Mattock > <justinmattock@gmail.com> wrote: > >> ath_print in xmit.c should say "Reseting hardware" >> instead of Reaseting HAL!(since HAL is being fazed out). >> dmesg shows: >> [ 8660.899624] ath: Failed to stop TX DMA in 100 msec after killing last frame >> [ 8660.899676] ath: Unable to stop TxDMA. Reset HAL! >> >> >> Signed-off-by: Justin P. Mattock<justinmattock@gmail.com> >> >> --- >> drivers/net/wireless/ath/ath9k/xmit.c | 2 +- >> 1 files changed, 1 insertions(+), 1 deletions(-) >> >> diff --git a/drivers/net/wireless/ath/ath9k/xmit.c b/drivers/net/wireless/ath/ath9k/xmit.c >> index 3db1917..2a0558e 100644 >> --- a/drivers/net/wireless/ath/ath9k/xmit.c >> +++ b/drivers/net/wireless/ath/ath9k/xmit.c >> @@ -1198,7 +1198,7 @@ void ath_drain_all_txq(struct ath_softc *sc, bool retry_tx) >> int r; >> >> ath_print(common, ATH_DBG_FATAL, >> - "Unable to stop TxDMA. Reset HAL!\n"); >> + "Unable to stop TxDMA. Reseting hardware!\n"); >> > Thanks for the patch but you need to send this to John, cc linux-wireless. > > Luis > > alright resent with the other patch I had kicking around.. (hopefully the right Cc's) cheers, Justin P. Mattock ^ permalink raw reply [flat|nested] 18+ messages in thread
* [ath9k-devel] [PATCH]wireless:ath9k Fix ath_print in xmit.c 2010-05-26 16:49 ` Justin P. Mattock @ 2010-05-26 23:06 ` Peter Stuge -1 siblings, 0 replies; 18+ messages in thread From: Peter Stuge @ 2010-05-26 23:06 UTC (permalink / raw) To: ath9k-devel Justin P. Mattock wrote: > ath_print in xmit.c should say "Reseting hardware" I think that should be "Resetting hardware" with two t:s. //Peter ^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: [ath9k-devel] [PATCH]wireless:ath9k Fix ath_print in xmit.c @ 2010-05-26 23:06 ` Peter Stuge 0 siblings, 0 replies; 18+ messages in thread From: Peter Stuge @ 2010-05-26 23:06 UTC (permalink / raw) To: Justin P. Mattock; +Cc: ath9k-devel, linux-kernel, mcgrog Justin P. Mattock wrote: > ath_print in xmit.c should say "Reseting hardware" I think that should be "Resetting hardware" with two t:s. //Peter ^ permalink raw reply [flat|nested] 18+ messages in thread
* [ath9k-devel] [PATCH]wireless:ath9k Fix ath_print in xmit.c 2010-05-26 23:06 ` Peter Stuge @ 2010-05-26 23:28 ` Justin P. Mattock -1 siblings, 0 replies; 18+ messages in thread From: Justin P. Mattock @ 2010-05-26 23:28 UTC (permalink / raw) To: ath9k-devel On 05/26/2010 04:06 PM, Peter Stuge wrote: > Justin P. Mattock wrote: > >> ath_print in xmit.c should say "Reseting hardware" >> > I think that should be "Resetting hardware" with two t:s. > > > //Peter > > yep!! here is the updated version.. http://thread.gmane.org/gmane.linux.kernel.wireless.general (duh!! I didn't even think about that) Thanks for the response. Justin P. Mattock ^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: [ath9k-devel] [PATCH]wireless:ath9k Fix ath_print in xmit.c @ 2010-05-26 23:28 ` Justin P. Mattock 0 siblings, 0 replies; 18+ messages in thread From: Justin P. Mattock @ 2010-05-26 23:28 UTC (permalink / raw) To: ath9k-devel, linux-kernel, mcgrog On 05/26/2010 04:06 PM, Peter Stuge wrote: > Justin P. Mattock wrote: > >> ath_print in xmit.c should say "Reseting hardware" >> > I think that should be "Resetting hardware" with two t:s. > > > //Peter > > yep!! here is the updated version.. http://thread.gmane.org/gmane.linux.kernel.wireless.general (duh!! I didn't even think about that) Thanks for the response. Justin P. Mattock ^ permalink raw reply [flat|nested] 18+ messages in thread
* [ath9k-devel] [PATCH]wireless:ath9k Fix ath_print in xmit.c 2010-05-26 23:06 ` Peter Stuge @ 2010-05-26 23:30 ` Justin P. Mattock -1 siblings, 0 replies; 18+ messages in thread From: Justin P. Mattock @ 2010-05-26 23:30 UTC (permalink / raw) To: ath9k-devel Oops.. should be: http://thread.gmane.org/gmane.linux.kernel.wireless.general/51431 Justin P. Mattock ^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: [ath9k-devel] [PATCH]wireless:ath9k Fix ath_print in xmit.c @ 2010-05-26 23:30 ` Justin P. Mattock 0 siblings, 0 replies; 18+ messages in thread From: Justin P. Mattock @ 2010-05-26 23:30 UTC (permalink / raw) To: ath9k-devel, linux-kernel, mcgrog Oops.. should be: http://thread.gmane.org/gmane.linux.kernel.wireless.general/51431 Justin P. Mattock ^ permalink raw reply [flat|nested] 18+ messages in thread
* [ath9k-devel] [PATCH]wireless:ath9k Fix ath_print in xmit.c 2010-05-26 16:49 ` Justin P. Mattock @ 2010-05-27 20:59 ` Roland Dreier -1 siblings, 0 replies; 18+ messages in thread From: Roland Dreier @ 2010-05-27 20:59 UTC (permalink / raw) To: ath9k-devel > - "Unable to stop TxDMA. Reset HAL!\n"); > + "Unable to stop TxDMA. Reseting hardware!\n"); I hate to mention it but the correct spelling is "resetting." -- Roland Dreier <rolandd@cisco.com> || For corporate legal information go to: http://www.cisco.com/web/about/doing_business/legal/cri/index.html ^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: [PATCH]wireless:ath9k Fix ath_print in xmit.c @ 2010-05-27 20:59 ` Roland Dreier 0 siblings, 0 replies; 18+ messages in thread From: Roland Dreier @ 2010-05-27 20:59 UTC (permalink / raw) To: Justin P. Mattock; +Cc: ath9k-devel, mcgrog, linux-kernel > - "Unable to stop TxDMA. Reset HAL!\n"); > + "Unable to stop TxDMA. Reseting hardware!\n"); I hate to mention it but the correct spelling is "resetting." -- Roland Dreier <rolandd@cisco.com> || For corporate legal information go to: http://www.cisco.com/web/about/doing_business/legal/cri/index.html ^ permalink raw reply [flat|nested] 18+ messages in thread
* [ath9k-devel] [PATCH]wireless:ath9k Fix ath_print in xmit.c 2010-05-27 20:59 ` Roland Dreier @ 2010-05-27 21:04 ` Justin P. Mattock -1 siblings, 0 replies; 18+ messages in thread From: Justin P. Mattock @ 2010-05-27 21:04 UTC (permalink / raw) To: ath9k-devel On 05/27/2010 01:59 PM, Roland Dreier wrote: > > - "Unable to stop TxDMA. Reset HAL!\n"); > > + "Unable to stop TxDMA. Reseting hardware!\n"); > > I hate to mention it but the correct spelling is "resetting." > no.. mention it!! anyways the resend is here: http://thread.gmane.org/gmane.linux.kernel.wireless.general/51431 Justin P. Mattock ^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: [PATCH]wireless:ath9k Fix ath_print in xmit.c @ 2010-05-27 21:04 ` Justin P. Mattock 0 siblings, 0 replies; 18+ messages in thread From: Justin P. Mattock @ 2010-05-27 21:04 UTC (permalink / raw) To: Roland Dreier; +Cc: ath9k-devel, mcgrog, linux-kernel On 05/27/2010 01:59 PM, Roland Dreier wrote: > > - "Unable to stop TxDMA. Reset HAL!\n"); > > + "Unable to stop TxDMA. Reseting hardware!\n"); > > I hate to mention it but the correct spelling is "resetting." > no.. mention it!! anyways the resend is here: http://thread.gmane.org/gmane.linux.kernel.wireless.general/51431 Justin P. Mattock ^ permalink raw reply [flat|nested] 18+ messages in thread
end of thread, other threads:[~2010-05-27 21:04 UTC | newest] Thread overview: 18+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2010-05-26 16:49 [ath9k-devel] [PATCH]wireless:ath9k Fix ath_print in xmit.c Justin P. Mattock 2010-05-26 16:49 ` Justin P. Mattock 2010-05-26 17:05 ` [ath9k-devel] " Luis R. Rodriguez 2010-05-26 17:05 ` Luis R. Rodriguez 2010-05-26 17:08 ` Justin P. Mattock 2010-05-26 17:08 ` Justin P. Mattock 2010-05-26 17:16 ` Justin P. Mattock 2010-05-26 17:16 ` Justin P. Mattock 2010-05-26 23:06 ` Peter Stuge 2010-05-26 23:06 ` Peter Stuge 2010-05-26 23:28 ` Justin P. Mattock 2010-05-26 23:28 ` Justin P. Mattock 2010-05-26 23:30 ` Justin P. Mattock 2010-05-26 23:30 ` Justin P. Mattock 2010-05-27 20:59 ` Roland Dreier 2010-05-27 20:59 ` Roland Dreier 2010-05-27 21:04 ` [ath9k-devel] " Justin P. Mattock 2010-05-27 21:04 ` Justin P. Mattock
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.