[PATCH] General fixes in the serial_rs485 structure

[claudio@evidence.eu.com (Claudio Scordino)]

Philippe De Muyter ha scritto:
> On Mon, May 31, 2010 at 03:39:37PM +0200, Claudio Scordino wrote:
> 
>> diff --git a/drivers/serial/atmel_serial.c b/drivers/serial/atmel_serial.c
>> index eed3c2d..1adb1bf 100644
>> --- a/drivers/serial/atmel_serial.c
>> +++ b/drivers/serial/atmel_serial.c
>> @@ -216,7 +216,7 @@ void atmel_config_rs485(struct uart_port *port, struct serial_rs485 *rs485conf)
>>  	if (rs485conf->flags & SER_RS485_ENABLED) {
>>  		dev_dbg(port->dev, "Setting UART to RS485\n");
>>  		atmel_port->tx_done_mask = ATMEL_US_TXEMPTY;
>> -		UART_PUT_TTGR(port, rs485conf->delay_rts_before_send);
>> +		UART_PUT_TTGR(port, rs485conf->delay_rts_after_send);
>>  		mode |= ATMEL_US_USMODE_RS485;
>>  	} else {
>>  		dev_dbg(port->dev, "Setting UART to RS232\n");
> 
> Should the usage of delay_rts_after_send not depend on
> (flags & SER_RS485_RTS_AFTER_SEND) also ?


You're right. Sorry for the oversight.

This is the patch fixed.

Many thanks,

              Claudio

==========================

New fields in structure serial_rs485.

This patch fixes several issues related to the RS485 interface:

 - It adds the flag SER_RS485_RTS_BEFORE_SEND that was missing from the 
   serial_rs485 structure (even if "delay_rts_before_send" was existing)

 - It adds a further "delay_rts_after_send" field for those drivers that 
   can have a delay after send (e.g., atmel_serial)

 - It fixes the usage of the structure in the atmel_serial driver (where
   "delay_rts_before_send" should be used instead of "delay_rts_after_send").


Signed-off-by: Claudio Scordino <claudio@evidence.eu.com>
Signed-off-by: Bernhard Roth <br@pwrnet.de>
---
 drivers/serial/atmel_serial.c |   11 ++++++++---
 include/linux/serial.h        |    4 +++-
 2 files changed, 11 insertions(+), 4 deletions(-)

diff --git a/drivers/serial/atmel_serial.c b/drivers/serial/atmel_serial.c
index eed3c2d..6a33546 100644
--- a/drivers/serial/atmel_serial.c
+++ b/drivers/serial/atmel_serial.c
@@ -216,7 +216,8 @@ void atmel_config_rs485(struct uart_port *port, struct serial_rs485 *rs485conf)
 	if (rs485conf->flags & SER_RS485_ENABLED) {
 		dev_dbg(port->dev, "Setting UART to RS485\n");
 		atmel_port->tx_done_mask = ATMEL_US_TXEMPTY;
-		UART_PUT_TTGR(port, rs485conf->delay_rts_before_send);
+		if (rs485conf->flags & SER_RS485_RTS_AFTER_SEND)
+			UART_PUT_TTGR(port, rs485conf->delay_rts_after_send);
 		mode |= ATMEL_US_USMODE_RS485;
 	} else {
 		dev_dbg(port->dev, "Setting UART to RS232\n");
@@ -291,7 +292,9 @@ static void atmel_set_mctrl(struct uart_port *port, u_int mctrl)
 
 	if (atmel_port->rs485.flags & SER_RS485_ENABLED) {
 		dev_dbg(port->dev, "Setting UART to RS485\n");
-		UART_PUT_TTGR(port, atmel_port->rs485.delay_rts_before_send);
+		if (atmel_port->rs485.flags & SER_RS485_RTS_AFTER_SEND)
+			UART_PUT_TTGR(port,
+					atmel_port->rs485.delay_rts_after_send);
 		mode |= ATMEL_US_USMODE_RS485;
 	} else {
 		dev_dbg(port->dev, "Setting UART to RS232\n");
@@ -1210,7 +1213,9 @@ static void atmel_set_termios(struct uart_port *port, struct ktermios *termios,
 
 	if (atmel_port->rs485.flags & SER_RS485_ENABLED) {
 		dev_dbg(port->dev, "Setting UART to RS485\n");
-		UART_PUT_TTGR(port, atmel_port->rs485.delay_rts_before_send);
+		if (atmel_port->rs485.flags & SER_RS485_RTS_AFTER_SEND)
+			UART_PUT_TTGR(port,
+					atmel_port->rs485.delay_rts_after_send);
 		mode |= ATMEL_US_USMODE_RS485;
 	} else {
 		dev_dbg(port->dev, "Setting UART to RS232\n");
diff --git a/include/linux/serial.h b/include/linux/serial.h
index c8613c3..f9a0b67 100644
--- a/include/linux/serial.h
+++ b/include/linux/serial.h
@@ -210,8 +210,10 @@ struct serial_rs485 {
 #define SER_RS485_ENABLED		(1 << 0)
 #define SER_RS485_RTS_ON_SEND		(1 << 1)
 #define SER_RS485_RTS_AFTER_SEND	(1 << 2)
+#define SER_RS485_RTS_BEFORE_SEND	(1 << 3)
 	__u32	delay_rts_before_send;	/* Milliseconds */
-	__u32	padding[6];		/* Memory is cheap, new structs
+	__u32	delay_rts_after_send;	/* Milliseconds */
+	__u32	padding[5];		/* Memory is cheap, new structs
 					   are a royal PITA .. */
 };
 
-- 
1.6.0.4