From: "Grégoire Sutre" <gregoire.sutre@gmail.com>
To: The development of GNU GRUB <grub-devel@gnu.org>
Subject: [PATCH] File name transformations (split into 7 diffs)
Date: Fri, 04 Jun 2010 01:42:40 +0200 [thread overview]
Message-ID: <4C083DF0.6080508@gmail.com> (raw)
[-- Attachment #1: Type: text/plain, Size: 1666 bytes --]
Hi,
This is the same patch as I sent before, but this time split into 7
diffs (which must be successively applied in order) and with a cleaner
changelog. I hope that this will facilitate the review.
This version does not include the --root-directory addition to
grub-mkconfig, as this is quite orthognal to the goal of the patch (file
name transformation).
I welcome your comments,
Grégoire
--- mostly taken from my previous message ------------------------------
The attached patch fixes problems with file name transformations, which
are partly broken in trunk. With this patch, several installations of
grub can coexist with no conflict (at least they should), sharing
however the same configuration directory (etc/grub.d).
For instance:
./configure --program-transform-name=s,grub,aaa,
will install bin/aaa-*, sbin/aaa-*, etc. The default grub directory will
be /boot/aaa, modules will be installed there and grub-mkconfig will
look for them there.
The main changes in the patch are:
- configure defines three new variables, accounting for transformations:
. pkgdatadir (${datadir}/grub)
. pkglibrootdir (${libdir}/grub)
. defaultbootdir (/boot/grub, or /grub if OS is NetBSD or OpenBSD)
- these variables are used in Makefile and in util/... scripts
- output of --help and of --version in scripts uses `basename $0` and
the same format as the one in binaries.
- in Makefile, the help2man, .info, and .mo rules also account for
file name transformations.
- grub-mkconfig exports GRUB_DIR, which is used by grub-mkconfig_lib
and by 00_header.
-----------------------------------------------------------------------
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #2: file-name-transformations_1.diff --]
[-- Type: text/x-patch; name="file-name-transformations_1.diff", Size: 13688 bytes --]
=== modified file 'ChangeLog'
--- ChangeLog 2010-06-03 08:48:23 +0000
+++ ChangeLog 2010-06-03 20:34:49 +0000
@@ -1,3 +1,22 @@
+2010-06-03 Grégoire Sutre <gregoire.sutre@gmail.com>
+
+ Make --version uniform and avoid hard-coded program name.
+
+ * util/grub-mkimage.c (main): Use `program_name' instead of
+ hard-coded string.
+ * util/i386/pc/grub-setup.c (main): Likewise.
+ * util/sparc64/ieee1275/grub-setup.c (parse_options): Likewise.
+ * util/grub-install.in: Save the basename of $0 in $self, and use the
+ latter in informational messages. Use the same format for --version
+ as the binary programs.
+ * util/grub-mkconfig.in: Likewise.
+ * util/grub-mkrescue.in: Likewise.
+ * util/grub-reboot.in: Likewise.
+ * util/grub-set-default.in: Likewise.
+ * util/i386/efi/grub-install.in: Likewise.
+ * util/ieee1275/grub-install.in: Likewise.
+ * util/powerpc/ieee1275/grub-mkrescue.in: Likewise.
+
2010-06-03 Colin Watson <cjwatson@ubuntu.com>
* INSTALL: Document several build requirements for optional features
=== modified file 'util/grub-install.in'
--- util/grub-install.in 2010-05-18 11:45:25 +0000
+++ util/grub-install.in 2010-06-03 20:34:49 +0000
@@ -34,6 +34,8 @@ font=@datadir@/@PACKAGE_TARNAME@/ascii.p
pkglibdir=${libdir}/`echo ${PACKAGE_TARNAME}/${target_cpu}-${platform} | sed ${transform}`
localedir=@datadir@/locale
+self=`basename $0`
+
grub_setup=${sbindir}/`echo grub-setup | sed ${transform}`
grub_mkimage=${bindir}/`echo grub-mkimage | sed ${transform}`
grub_mkdevicemap=${sbindir}/`echo grub-mkdevicemap | sed ${transform}`
@@ -61,7 +63,7 @@ fi
# Print the usage.
usage () {
cat <<EOF
-Usage: grub-install [OPTION] install_device
+Usage: $self [OPTION] install_device
Install GRUB on your drive.
-h, --help print this message and exit
@@ -91,10 +93,10 @@ fi
INSTALL_DEVICE can be a GRUB device name or a system device filename.
-grub-install copies GRUB images into /boot/grub (or /grub on NetBSD and
+$self copies GRUB images into /boot/grub (or /grub on NetBSD and
OpenBSD), and uses grub-setup to install grub into the boot sector.
-If the --root-directory option is used, then grub-install will copy
+If the --root-directory option is used, then $self will copy
images into the operating system installation rooted at that directory.
Report bugs to <bug-grub@gnu.org>.
@@ -108,7 +110,7 @@ for option in "$@"; do
usage
exit 0 ;;
-v | --version)
- echo "grub-install (GNU GRUB ${PACKAGE_VERSION})"
+ echo "$self (${PACKAGE_NAME}) ${PACKAGE_VERSION}"
exit 0 ;;
--modules=*)
modules=`echo "$option" | sed 's/--modules=//'` ;;
=== modified file 'util/grub-mkconfig.in'
--- util/grub-mkconfig.in 2010-05-23 12:11:11 +0000
+++ util/grub-mkconfig.in 2010-06-03 20:34:49 +0000
@@ -23,7 +23,8 @@ exec_prefix=@exec_prefix@
sbindir=@sbindir@
libdir=@libdir@
sysconfdir=@sysconfdir@
-package_version=@PACKAGE_VERSION@
+PACKAGE_NAME=@PACKAGE_NAME@
+PACKAGE_VERSION=@PACKAGE_VERSION@
host_os=@host_os@
datarootdir=@datarootdir@
datadir=@datadir@
@@ -31,6 +32,8 @@ pkgdatadir=${datadir}/`echo @PACKAGE_TAR
grub_cfg=""
grub_mkconfig_dir=${sysconfdir}/grub.d
+self=`basename $0`
+
grub_mkdevicemap=${sbindir}/`echo grub-mkdevicemap | sed ${transform}`
grub_probe=${sbindir}/`echo grub-probe | sed ${transform}`
@@ -38,7 +41,7 @@ grub_probe=${sbindir}/`echo grub-probe |
# Print the usage.
usage () {
cat <<EOF
-Usage: $0 [OPTION]
+Usage: $self [OPTION]
Generate a grub config file
-o, --output=FILE output generated config to FILE [default=stdout]
@@ -62,7 +65,7 @@ for option in "$@"; do
usage
exit 0 ;;
-v | --version)
- echo "$0 (GNU GRUB ${package_version})"
+ echo "$self (${PACKAGE_NAME}) ${PACKAGE_VERSION}"
exit 0 ;;
-o)
next_grub_cfg=:
@@ -113,7 +116,7 @@ if [ "$EUID" != 0 ] ; then
done ;;
esac
if [ $root != t ] ; then
- echo "$0: You must run this as root" >&2
+ echo "$self: You must run this as root" >&2
exit 1
fi
fi
@@ -284,7 +287,7 @@ cat << EOF
#
# DO NOT EDIT THIS FILE
#
-# It is automatically generated by $0 using templates
+# It is automatically generated by $self using templates
# from ${grub_mkconfig_dir} and settings from ${sysconfdir}/default/grub
#
EOF
=== modified file 'util/grub-mkimage.c'
--- util/grub-mkimage.c 2010-05-18 11:55:26 +0000
+++ util/grub-mkimage.c 2010-06-03 20:34:49 +0000
@@ -1307,7 +1307,7 @@ main (int argc, char *argv[])
break;
case 'V':
- printf ("grub-mkimage (%s) %s\n", PACKAGE_NAME, PACKAGE_VERSION);
+ printf ("%s (%s) %s\n", program_name, PACKAGE_NAME, PACKAGE_VERSION);
return 0;
case 'v':
=== modified file 'util/grub-mkrescue.in'
--- util/grub-mkrescue.in 2010-05-27 11:43:22 +0000
+++ util/grub-mkrescue.in 2010-06-03 20:34:49 +0000
@@ -30,6 +30,8 @@ target_cpu=@target_cpu@
native_platform=@platform@
pkglib_DATA="@pkglib_DATA@"
+self=`basename $0`
+
multiboot_dir=${libdir}/$(echo ${PACKAGE_TARNAME} | sed ${transform})/i386-multiboot
coreboot_dir=${libdir}/$(echo ${PACKAGE_TARNAME} | sed ${transform})/i386-coreboot
qemu_dir=${libdir}/$(echo ${PACKAGE_TARNAME} | sed ${transform})/i386-qemu
@@ -44,7 +46,7 @@ grub_mkimage=${bindir}/`echo grub-mkimag
# Print the usage.
usage () {
cat <<EOF
-Usage: $0 [OPTION] SOURCE...
+Usage: $self [OPTION] SOURCE...
Make GRUB rescue image.
-h, --help print this message and exit
@@ -54,7 +56,7 @@ Make GRUB rescue image.
--rom-directory=DIR save rom images in DIR [optional]
--grub-mkimage=FILE use FILE as grub-mkimage
-$0 generates a bootable rescue image with specified source files or directories.
+$self generates a bootable rescue image with specified source files or directories.
Report bugs to <bug-grub@gnu.org>.
EOF
@@ -67,7 +69,7 @@ for option in "$@"; do
usage
exit 0 ;;
-v | --version)
- echo "$0 (GNU GRUB ${PACKAGE_VERSION})"
+ echo "$self (${PACKAGE_NAME}) ${PACKAGE_VERSION}"
exit 0 ;;
--modules=*)
modules=`echo "$option" | sed 's/--modules=//'` ;;
=== modified file 'util/grub-reboot.in'
--- util/grub-reboot.in 2010-01-05 11:16:42 +0000
+++ util/grub-reboot.in 2010-06-03 20:34:49 +0000
@@ -22,6 +22,10 @@ transform="@program_transform_name@"
prefix=@prefix@
exec_prefix=@exec_prefix@
bindir=@bindir@
+PACKAGE_NAME=@PACKAGE_NAME@
+PACKAGE_VERSION=@PACKAGE_VERSION@
+
+self=`basename $0`
grub_editenv=${bindir}/`echo grub-editenv | sed ${transform}`
rootdir=
@@ -30,7 +34,7 @@ rootdir=
# Print the usage.
usage () {
cat <<EOF
-Usage: $0 [OPTION] entry
+Usage: $self [OPTION] entry
Set the default boot entry for GRUB, for the next boot only.
-h, --help print this message and exit
@@ -51,7 +55,7 @@ for option in "$@"; do
usage
exit 0 ;;
-v | --version)
- echo "grub-reboot (GNU GRUB ${PACKAGE_VERSION})"
+ echo "$self (${PACKAGE_NAME}) ${PACKAGE_VERSION}"
exit 0 ;;
--root-directory=*)
rootdir=`echo "$option" | sed 's/--root-directory=//'` ;;
=== modified file 'util/grub-set-default.in'
--- util/grub-set-default.in 2009-12-08 01:00:26 +0000
+++ util/grub-set-default.in 2010-06-03 20:34:49 +0000
@@ -22,6 +22,10 @@ transform="@program_transform_name@"
prefix=@prefix@
exec_prefix=@exec_prefix@
bindir=@bindir@
+PACKAGE_NAME=@PACKAGE_NAME@
+PACKAGE_VERSION=@PACKAGE_VERSION@
+
+self=`basename $0`
grub_editenv=${bindir}/`echo grub-editenv | sed ${transform}`
rootdir=
@@ -30,7 +34,7 @@ rootdir=
# Print the usage.
usage () {
cat <<EOF
-Usage: $0 [OPTION] entry
+Usage: $self [OPTION] entry
Set the default boot entry for GRUB.
-h, --help print this message and exit
@@ -51,7 +55,7 @@ for option in "$@"; do
usage
exit 0 ;;
-v | --version)
- echo "grub-set-default (GNU GRUB ${PACKAGE_VERSION})"
+ echo "$self (${PACKAGE_NAME}) ${PACKAGE_VERSION}"
exit 0 ;;
--root-directory=*)
rootdir=`echo "$option" | sed 's/--root-directory=//'` ;;
=== modified file 'util/i386/efi/grub-install.in'
--- util/i386/efi/grub-install.in 2010-04-26 19:27:41 +0000
+++ util/i386/efi/grub-install.in 2010-06-03 20:34:49 +0000
@@ -33,6 +33,8 @@ host_os=@host_os@
pkglibdir=${libdir}/`echo ${PACKAGE_TARNAME}/${target_cpu}-${platform} | sed ${transform}`
localedir=@datadir@/locale
+self=`basename $0`
+
grub_mkimage=${bindir}/`echo grub-mkimage | sed ${transform}`
grub_mkdevicemap=${sbindir}/`echo grub-mkdevicemap | sed ${transform}`
grub_probe=${sbindir}/`echo grub-probe | sed ${transform}`
@@ -50,7 +52,7 @@ debug=no
# Print the usage.
usage () {
cat <<EOF
-Usage: grub-install [OPTION]
+Usage: $self [OPTION]
Install GRUB on your EFI partition.
-h, --help print this message and exit
@@ -64,7 +66,7 @@ Install GRUB on your EFI partition.
--no-floppy do not probe any floppy drive
--recheck probe a device map even if it already exists
-grub-install copies GRUB images into the DIR/boot directory specified by
+$self copies GRUB images into the DIR/boot directory specified by
--root-directory.
Report bugs to <bug-grub@gnu.org>.
@@ -78,7 +80,7 @@ for option in "$@"; do
usage
exit 0 ;;
-v | --version)
- echo "grub-install (GNU GRUB ${PACKAGE_VERSION})"
+ echo "$self (${PACKAGE_NAME}) ${PACKAGE_VERSION}"
exit 0 ;;
--modules=*)
modules=`echo "$option" | sed 's/--modules=//'` ;;
@@ -219,7 +221,7 @@ $grub_mkimage -O ${target_cpu}-efi --out
echo "Installation finished. No error reported."
echo "This is the contents of the device map $device_map."
echo "Check if this is correct or not. If any of the lines is incorrect,"
-echo "fix it and re-run the script \`grub-install'."
+echo "fix it and re-run the script \`$self'."
echo
cat $device_map
=== modified file 'util/i386/pc/grub-setup.c'
--- util/i386/pc/grub-setup.c 2010-05-17 19:26:16 +0000
+++ util/i386/pc/grub-setup.c 2010-06-03 20:34:49 +0000
@@ -702,7 +702,7 @@ main (int argc, char *argv[])
break;
case 'V':
- printf ("grub-setup (%s) %s\n", PACKAGE_NAME, PACKAGE_VERSION);
+ printf ("%s (%s) %s\n", program_name, PACKAGE_NAME, PACKAGE_VERSION);
return 0;
case 'v':
=== modified file 'util/ieee1275/grub-install.in'
--- util/ieee1275/grub-install.in 2010-04-26 19:27:41 +0000
+++ util/ieee1275/grub-install.in 2010-06-03 20:34:49 +0000
@@ -34,6 +34,8 @@ target_cpu=@target_cpu@
platform=@platform@
pkglibdir=${libdir}/`echo ${PACKAGE_TARNAME}/${target_cpu}-${platform} | sed ${transform}`
+self=`basename $0`
+
grub_mkimage=${bindir}/`echo grub-mkimage | sed ${transform}`
grub_mkdevicemap=${sbindir}/`echo grub-mkdevicemap | sed ${transform}`
grub_probe=${sbindir}/`echo grub-probe | sed ${transform}`
@@ -53,7 +55,7 @@ nvsetenv=`which nvsetenv`
# Print the usage.
usage () {
cat <<EOF
-Usage: grub-install [OPTION] [install_device]
+Usage: $self [OPTION] [install_device]
Install GRUB on your drive.
-h, --help print this message and exit
@@ -66,7 +68,7 @@ Install GRUB on your drive.
--grub-probe=FILE use FILE as grub-probe
--no-nvram don't update the boot-device NVRAM variable
-grub-install copies GRUB images into the DIR/boot directory specified by
+$self copies GRUB images into the DIR/boot directory specified by
--root-directory, and uses nvsetenv to set the Open Firmware boot-device
variable.
@@ -81,7 +83,7 @@ for option in "$@"; do
usage
exit 0 ;;
-v | --version)
- echo "grub-install (GNU GRUB ${PACKAGE_VERSION})"
+ echo "$self (${PACKAGE_NAME}) ${PACKAGE_VERSION}"
exit 0 ;;
--modules=*)
modules=`echo "$option" | sed 's/--modules=//'` ;;
@@ -231,7 +233,7 @@ fi
echo "Installation finished. No error reported."
echo "This is the contents of the device map $device_map."
echo "Check if this is correct or not. If any of the lines is incorrect,"
-echo "fix it and re-run the script \`grub-install'."
+echo "fix it and re-run the script \`$self'."
echo
cat $device_map
=== modified file 'util/powerpc/ieee1275/grub-mkrescue.in'
--- util/powerpc/ieee1275/grub-mkrescue.in 2010-04-26 19:27:41 +0000
+++ util/powerpc/ieee1275/grub-mkrescue.in 2010-06-03 20:34:49 +0000
@@ -30,13 +30,15 @@ target_cpu=@target_cpu@
platform=@platform@
pkglibdir=${libdir}/`echo ${PACKAGE_TARNAME}/${target_cpu}-${platform} | sed ${transform}`
+self=`basename $0`
+
grub_mkimage=${bindir}/`echo grub-mkimage | sed ${transform}`
# Usage: usage
# Print the usage.
usage () {
cat <<EOF
-Usage: grub-mkrescue [OPTION] output_image
+Usage: $self [OPTION] output_image
Make GRUB rescue image.
-h, --help print this message and exit
@@ -46,7 +48,7 @@ Make GRUB rescue image.
default: ${pkglibdir}
--grub-mkimage=FILE use FILE as grub-mkimage
-grub-mkimage generates a bootable rescue CD image for PowerMac and CHRP.
+$self generates a bootable rescue CD image for PowerMac and CHRP.
Report bugs to <bug-grub@gnu.org>.
EOF
@@ -61,7 +63,7 @@ for option in "$@"; do
usage
exit 0 ;;
-v | --version)
- echo "grub-mkrescue (GNU GRUB ${PACKAGE_VERSION})"
+ echo "$self (${PACKAGE_NAME}) ${PACKAGE_VERSION}"
exit 0 ;;
--modules=*)
modules=`echo "$option" | sed 's/--modules=//'` ;;
=== modified file 'util/sparc64/ieee1275/grub-setup.c'
--- util/sparc64/ieee1275/grub-setup.c 2010-05-17 19:26:16 +0000
+++ util/sparc64/ieee1275/grub-setup.c 2010-06-03 20:34:49 +0000
@@ -503,7 +503,7 @@ parse_options (struct grub_setup_info *g
break;
case 'V':
- printf ("grub-setup (%s) %s\n", PACKAGE_NAME, PACKAGE_VERSION);
+ printf ("%s (%s) %s\n", program_name, PACKAGE_NAME, PACKAGE_VERSION);
return 0;
case 'v':
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #3: file-name-transformations_2.diff --]
[-- Type: text/x-patch; name="file-name-transformations_2.diff", Size: 23734 bytes --]
=== modified file 'ChangeLog'
--- ChangeLog 2010-06-03 20:34:49 +0000
+++ ChangeLog 2010-06-03 21:36:19 +0000
@@ -1,5 +1,29 @@
2010-06-03 Grégoire Sutre <gregoire.sutre@gmail.com>
+ * configure.ac: Set and subsitute pkgdatadir, pkglibrootdir and
+ defaultbootdir.
+ * Makefile.in: Use the above autoconfigured variables.
+ * util/grub-install.in: Likewise, and simplify usage message.
+ * util/grub-mkrescue.in: Likewise.
+ * util/grub-reboot.in: Likewise.
+ * util/grub-set-default.in: Likewise.
+ * util/grub.d/10_hurd.in: Likewise.
+ * util/grub.d/10_kfreebsd.in: Likewise.
+ * util/grub.d/10_linux.in: Likewise.
+ * util/grub.d/10_netbsd.in: Likewise.
+ * util/grub.d/10_windows.in: Likewise.
+ * util/grub.d/30_os-prober.in: Likewise.
+ * util/i386/efi/grub-install.in: Likewise.
+ * util/ieee1275/grub-install.in: Likewise.
+ * util/powerpc/ieee1275/grub-mkrescue.in: Likewise.
+ * util/update-grub_lib.in: Likewise.
+ * util/grub-mkconfig.in: Likewise.
+ (GRUB_DIR): Export new variable.
+ * util/grub-mkconfig_lib.in: Likewise, and use device.map in GRUB_DIR.
+ * util/grub.d/00_header.in: Likewise, and use GRUB_DIR.
+
+2010-06-03 Grégoire Sutre <gregoire.sutre@gmail.com>
+
Make --version uniform and avoid hard-coded program name.
* util/grub-mkimage.c (main): Use `program_name' instead of
=== modified file 'Makefile.in'
--- Makefile.in 2010-05-18 11:55:26 +0000
+++ Makefile.in 2010-06-03 21:36:19 +0000
@@ -39,8 +39,9 @@ localedir = @localedir@
infodir = @infodir@
mandir = @mandir@
includedir = @includedir@
-pkgdatadir = $(datadir)/`echo @PACKAGE_TARNAME@ | sed '$(transform)'`
-pkglibdir = $(libdir)/`echo @PACKAGE_TARNAME@/$(target_cpu)-$(platform) | sed '$(transform)'`
+pkgdatadir = @pkgdatadir@
+pkglibrootdir = @pkglibrootdir@
+pkglibdir = $(pkglibrootdir)/$(target_cpu)-$(platform)
# Internationalization library.
LIBINTL = @LIBINTL@
@@ -90,7 +91,7 @@ GNULIB_CFLAGS = $(GNULIB_UTIL_CFLAGS) $(
ASFLAGS = @ASFLAGS@
LDFLAGS = @LDFLAGS@ $(LIBS)
CPPFLAGS = @CPPFLAGS@ -I$(builddir) -I$(builddir)/include -I$(srcdir)/gnulib -I$(srcdir)/include -Wall -W \
- -DGRUB_PKGLIBROOTDIR=\"$(libdir)/`echo @PACKAGE_TARNAME@ | sed '$(transform)'`\" -DLOCALEDIR=\"$(localedir)\"
+ -DGRUB_PKGLIBROOTDIR=\"$(pkglibrootdir)\" -DLOCALEDIR=\"$(localedir)\"
TARGET_CC = @TARGET_CC@
TARGET_CFLAGS = -ffreestanding @TARGET_CFLAGS@
TARGET_ASFLAGS = -nostdinc -fno-builtin @TARGET_ASFLAGS@
@@ -355,12 +356,12 @@ install-local: all
dest="`echo $$file | sed 's,.*/,,' | sed '$(transform)'`"; \
$(INSTALL_DATA) $$dir$$file $(DESTDIR)$(sysconfdir)/grub.d/$$dest; \
done
- $(SHELL) $(mkinstalldirs) $(DESTDIR)$(libdir)/grub
+ $(SHELL) $(mkinstalldirs) $(DESTDIR)$(pkglibrootdir)
@list='$(lib_SCRIPTS)'; \
for file in $$list; do \
if test -f "$$file"; then dir=; else dir="$(srcdir)/"; fi; \
dest="`echo $$file | sed 's,.*/,,'`"; \
- $(INSTALL_DATA) $$dir$$file $(DESTDIR)$(libdir)/grub/$$dest; \
+ $(INSTALL_DATA) $$dir$$file $(DESTDIR)$(pkglibrootdir)/$$dest; \
done
@langs='$(LINGUAS)'; \
for lang in $$langs; do \
@@ -412,7 +413,7 @@ uninstall:
@list='$(lib_SCRIPTS)'; \
for file in $$list; do \
dest="`echo $$file | sed 's,.*/,,'`"; \
- rm -f $(DESTDIR)$(libdir)/grub/$$dest; \
+ rm -f $(DESTDIR)$(pkglibrootdir)/$$dest; \
done
@list='$(info_INFOS)'; \
for file in $$list; do \
=== modified file 'configure.ac'
--- configure.ac 2010-05-28 17:13:48 +0000
+++ configure.ac 2010-06-03 21:36:19 +0000
@@ -798,6 +798,27 @@ fi
AC_SUBST(ASFLAGS)
+# Additional names and paths to be substituted in makefiles and scripts.
+pkgdatadir=${datadir}/`echo ${PACKAGE_TARNAME} | sed "${program_transform_name}"`
+pkglibrootdir=${libdir}/`echo ${PACKAGE_TARNAME} | sed "${program_transform_name}"`
+
+case "$host_os" in
+netbsd* | openbsd*)
+ # Because /boot is used for the boot block in NetBSD and OpenBSD, use /grub
+ # instead of /boot/grub.
+ defaultbootdir=
+ ;;
+*)
+ # Use /boot/grub by default.
+ defaultbootdir=/boot
+ ;;
+esac
+defaultbootdir=${defaultbootdir}/`echo ${PACKAGE_TARNAME} | sed "${program_transform_name}"`
+
+AC_SUBST([pkgdatadir])
+AC_SUBST([pkglibrootdir])
+AC_SUBST([defaultbootdir])
+
# Output files.
grub_CHECK_LINK_DIR
if test x"$link_dir" = xyes ; then
=== modified file 'util/grub-install.in'
--- util/grub-install.in 2010-06-03 20:34:49 +0000
+++ util/grub-install.in 2010-06-03 21:36:19 +0000
@@ -29,10 +29,11 @@ PACKAGE_TARNAME=@PACKAGE_TARNAME@
PACKAGE_VERSION=@PACKAGE_VERSION@
target_cpu=@target_cpu@
platform=@platform@
-host_os=@host_os@
font=@datadir@/@PACKAGE_TARNAME@/ascii.pf2
-pkglibdir=${libdir}/`echo ${PACKAGE_TARNAME}/${target_cpu}-${platform} | sed ${transform}`
+pkglibrootdir=@pkglibrootdir@
+pkglibdir=${pkglibrootdir}/${target_cpu}-${platform}
localedir=@datadir@/locale
+defaultbootdir=@defaultbootdir@
self=`basename $0`
@@ -42,7 +43,6 @@ grub_mkdevicemap=${sbindir}/`echo grub-m
grub_probe=${sbindir}/`echo grub-probe | sed ${transform}`
grub_editenv=${bindir}/`echo grub-editenv | sed ${transform}`
rootdir=
-grub_prefix=`echo /boot/grub | sed ${transform}`
modules=
install_device=
@@ -91,13 +91,11 @@ EOF
fi
cat <<EOF
-INSTALL_DEVICE can be a GRUB device name or a system device filename.
-
-$self copies GRUB images into /boot/grub (or /grub on NetBSD and
-OpenBSD), and uses grub-setup to install grub into the boot sector.
+$self copies GRUB images into the DIR${defaultbootdir} directory specified by
+--root-directory, and uses `basename ${grub_setup}` to install GRUB into the
+boot sector of INSTALL_DEVICE.
-If the --root-directory option is used, then $self will copy
-images into the operating system installation rooted at that directory.
+INSTALL_DEVICE can be a GRUB device name or a system device filename.
Report bugs to <bug-grub@gnu.org>.
EOF
@@ -155,7 +153,7 @@ for option in "$@"; do
done
# for make_system_path_relative_to_its_root()
-. ${libdir}/grub/grub-mkconfig_lib
+. ${pkglibrootdir}/grub-mkconfig_lib
if test "x$install_device" = x && test "${target_cpu}-${platform}" != "mips-yeeloong"; then
echo "install_device not specified." 1>&2
@@ -171,20 +169,7 @@ if test $debug = yes; then
fi
# Initialize these directories here, since ROOTDIR was initialized.
-case "$host_os" in
-netbsd* | openbsd*)
- # Because /boot is used for the boot block in NetBSD and OpenBSD, use /grub
- # instead of /boot/grub.
- grub_prefix=`echo /grub | sed ${transform}`
- bootdir=${rootdir}
- ;;
-*)
- # Use /boot/grub by default.
- bootdir=${rootdir}/boot
- ;;
-esac
-
-grubdir=${bootdir}/`echo grub | sed ${transform}`
+grubdir=${rootdir}${defaultbootdir}
device_map=${grubdir}/device.map
grub_probe="${grub_probe} --device-map=${device_map}"
@@ -358,8 +343,10 @@ if [ "${target_cpu}-${platform}" = "i386
$grub_setup ${setup_verbose} ${setup_force} --directory=${grubdir} --device-map=${device_map} \
${install_device} || exit 1
elif [ "${target_cpu}-${platform}" = "mips-yeeloong" ] ; then
+ # XXX hard-coded /boot (use ${grubdir} or ${defaultbootdir} ?)
$grub_mkimage ${config_opt} -f ${font} -d ${pkglibdir} -O ${mkimage_target} --output=/boot/grub.elf --prefix=${prefix_drive}${relative_grubdir} $modules || exit 1
else
+ # XXX hard-coded /boot (use ${grubdir} or ${defaultbootdir} ?)
$grub_mkimage -O ${mkimage_target} ${config_opt} -d ${pkglibdir} --output=/boot/multiboot.img --prefix=${prefix_drive}${relative_grubdir} $modules || exit 1
fi
=== modified file 'util/grub-mkconfig.in'
--- util/grub-mkconfig.in 2010-06-03 20:34:49 +0000
+++ util/grub-mkconfig.in 2010-06-03 21:36:19 +0000
@@ -25,10 +25,11 @@ libdir=@libdir@
sysconfdir=@sysconfdir@
PACKAGE_NAME=@PACKAGE_NAME@
PACKAGE_VERSION=@PACKAGE_VERSION@
-host_os=@host_os@
datarootdir=@datarootdir@
datadir=@datadir@
-pkgdatadir=${datadir}/`echo @PACKAGE_TARNAME@ | sed "${transform}"`
+pkgdatadir=@pkgdatadir@
+pkglibrootdir=@pkglibrootdir@
+defaultbootdir=@defaultbootdir@
grub_cfg=""
grub_mkconfig_dir=${sysconfdir}/grub.d
@@ -86,19 +87,33 @@ if $next_grub_cfg; then
exit 1
fi
-. ${libdir}/grub/grub-mkconfig_lib
+set $grub_mkdevicemap dummy
+if test -f "$1"; then
+ :
+else
+ echo "$1: Not found." 1>&2
+ exit 1
+fi
+
+set $grub_probe dummy
+if test -f "$1"; then
+ :
+else
+ echo "$1: Not found." 1>&2
+ exit 1
+fi
+
+GRUB_DIR=${defaultbootdir}
+
+# Create the GRUB directory if it is not present.
+mkdir -p ${GRUB_DIR} || exit 1
+
+# This must be done before sourcing grub-mkconfig_lib.
+if test -e ${GRUB_DIR}/device.map ; then : ; else
+ ${grub_mkdevicemap} --device-map=${GRUB_DIR}/device.map
+fi
-case "$host_os" in
-netbsd* | openbsd*)
- # Because /boot is used for the boot block in NetBSD and OpenBSD, use /grub
- # instead of /boot/grub.
- grub_prefix=`echo /grub | sed ${transform}`
- ;;
-*)
- # Use /boot/grub by default.
- grub_prefix=`echo /boot/grub | sed ${transform}`
- ;;
-esac
+. ${pkglibrootdir}/grub-mkconfig_lib
if [ "x$EUID" = "x" ] ; then
EUID=`id -u`
@@ -121,28 +136,6 @@ if [ "$EUID" != 0 ] ; then
fi
fi
-set $grub_mkdevicemap dummy
-if test -f "$1"; then
- :
-else
- echo "$1: Not found." 1>&2
- exit 1
-fi
-
-set $grub_probe dummy
-if test -f "$1"; then
- :
-else
- echo "$1: Not found." 1>&2
- exit 1
-fi
-
-mkdir -p ${grub_prefix}
-
-if test -e ${grub_prefix}/device.map ; then : ; else
- ${grub_mkdevicemap}
-fi
-
# Device containing our userland. Typically used for root= parameter.
GRUB_DEVICE="`${grub_probe} --target=device /`"
GRUB_DEVICE_UUID="`${grub_probe} --device ${GRUB_DEVICE} --target=fs_uuid 2> /dev/null`" || true
@@ -174,7 +167,7 @@ fi
for x in ${GRUB_TERMINAL_OUTPUT}; do
if [ "x${x}" = "xgfxterm" ]; then
# If this platform supports gfxterm, try to use it.
- if ! test -e ${grub_prefix}/gfxterm.mod ; then
+ if ! test -e ${GRUB_DIR}/gfxterm.mod ; then
if [ "x$termoutdefault" != "x1" ]; then
echo "gfxterm isn't available on your platform" >&2 ; exit 1
fi
@@ -183,7 +176,7 @@ for x in ${GRUB_TERMINAL_OUTPUT}; do
fi
# FIXME: this should do something smarter than just loading first
# video backend.
- GRUB_VIDEO_BACKEND=$(head -n 1 ${grub_prefix}/video.lst || true)
+ GRUB_VIDEO_BACKEND=$(head -n 1 ${GRUB_DIR}/video.lst || true)
if [ -z "${GRUB_VIDEO_BACKEND}" ] ; then
if [ "x$termoutdefault" != "x1" ]; then
echo "No suitable backend could be found for gfxterm." >&2 ; exit 1
@@ -198,7 +191,7 @@ for x in ${GRUB_TERMINAL_OUTPUT}; do
exit 1
fi
else
- for dir in ${pkgdatadir} /boot/grub /usr/share/grub ; do
+ for dir in ${GRUB_DIR} ${pkgdatadir} /boot/grub /usr/share/grub ; do
for basename in unicode unifont ascii; do
path="${dir}/${basename}.pf2"
if is_path_readable_by_grub ${path} > /dev/null ; then
@@ -239,6 +232,7 @@ export GRUB_DEVICE \
GRUB_DEVICE_UUID \
GRUB_DEVICE_BOOT \
GRUB_DEVICE_BOOT_UUID \
+ GRUB_DIR \
GRUB_FS \
GRUB_FONT_PATH \
GRUB_PRELOAD_MODULES \
@@ -281,7 +275,7 @@ if test "x${grub_cfg}" != "x"; then
chmod 400 ${grub_cfg}.new || grub_warn "Could not make ${grub_cfg}.new readable by only root.\
This means that if the generated config contains a password it is readable by everyone"
fi
-echo "Generating grub.cfg ..." >&2
+echo "Generating grub configuration ..." >&2
cat << EOF
#
=== modified file 'util/grub-mkconfig_lib.in'
--- util/grub-mkconfig_lib.in 2010-05-27 14:38:16 +0000
+++ util/grub-mkconfig_lib.in 2010-06-03 21:36:19 +0000
@@ -22,7 +22,7 @@ datarootdir=@datarootdir@
datadir=@datadir@
bindir=@bindir@
sbindir=@sbindir@
-pkgdatadir=${datadir}/`echo @PACKAGE_TARNAME@ | sed "${transform}"`
+pkgdatadir=@pkgdatadir@
if test "x$grub_probe" = x; then
grub_probe=${sbindir}/`echo grub-probe | sed ${transform}`
@@ -31,6 +31,13 @@ if test "x$grub_mkrelpath" = x; then
grub_mkrelpath=${bindir}/`echo grub-mkrelpath | sed ${transform}`
fi
+# GRUB_DIR should be set before sourcing this file, but let's be safe.
+if test "x${GRUB_DIR}" != "x"; then
+ if test -e "${GRUB_DIR}/device.map"; then
+ grub_probe="${grub_probe} --device-map=${GRUB_DIR}/device.map"
+ fi
+fi
+
if $(which gettext >/dev/null 2>/dev/null) ; then
gettext="gettext"
else
=== modified file 'util/grub-mkrescue.in'
--- util/grub-mkrescue.in 2010-06-03 20:34:49 +0000
+++ util/grub-mkrescue.in 2010-06-03 21:36:19 +0000
@@ -28,16 +28,17 @@ PACKAGE_TARNAME=@PACKAGE_TARNAME@
PACKAGE_VERSION=@PACKAGE_VERSION@
target_cpu=@target_cpu@
native_platform=@platform@
+pkglibrootdir=@pkglibrootdir@
pkglib_DATA="@pkglib_DATA@"
self=`basename $0`
-multiboot_dir=${libdir}/$(echo ${PACKAGE_TARNAME} | sed ${transform})/i386-multiboot
-coreboot_dir=${libdir}/$(echo ${PACKAGE_TARNAME} | sed ${transform})/i386-coreboot
-qemu_dir=${libdir}/$(echo ${PACKAGE_TARNAME} | sed ${transform})/i386-qemu
-pc_dir=${libdir}/$(echo ${PACKAGE_TARNAME} | sed ${transform})/i386-pc
-efi32_dir=${libdir}/$(echo ${PACKAGE_TARNAME} | sed ${transform})/i386-efi
-efi64_dir=${libdir}/$(echo ${PACKAGE_TARNAME} | sed ${transform})/x86_64-efi
+multiboot_dir=${pkglibrootdir}/i386-multiboot
+coreboot_dir=${pkglibrootdir}/i386-coreboot
+qemu_dir=${pkglibrootdir}/i386-qemu
+pc_dir=${pkglibrootdir}/i386-pc
+efi32_dir=${pkglibrootdir}/i386-efi
+efi64_dir=${pkglibrootdir}/x86_64-efi
rom_directory=
override_dir=
grub_mkimage=${bindir}/`echo grub-mkimage | sed ${transform}`
=== modified file 'util/grub-reboot.in'
--- util/grub-reboot.in 2010-06-03 20:34:49 +0000
+++ util/grub-reboot.in 2010-06-03 21:36:19 +0000
@@ -24,6 +24,7 @@ exec_prefix=@exec_prefix@
bindir=@bindir@
PACKAGE_NAME=@PACKAGE_NAME@
PACKAGE_VERSION=@PACKAGE_VERSION@
+defaultbootdir=@defaultbootdir@
self=`basename $0`
@@ -81,20 +82,7 @@ if test "x$entry" = x; then
fi
# Initialize these directories here, since ROOTDIR was initialized.
-case "$host_os" in
-netbsd* | openbsd*)
- # Because /boot is used for the boot block in NetBSD and OpenBSD, use /grub
- # instead of /boot/grub.
- grub_prefix=`echo /grub | sed ${transform}`
- bootdir=${rootdir}
- ;;
-*)
- # Use /boot/grub by default.
- bootdir=${rootdir}/boot
- ;;
-esac
-
-grubdir=${bootdir}/`echo grub | sed ${transform}`
+grubdir=${rootdir}${defaultbootdir}
prev_saved_entry=`$grub_editenv ${grubdir}/grubenv list | sed -n 's/^saved_entry=//p'`
if [ "$prev_saved_entry" ]; then
=== modified file 'util/grub-set-default.in'
--- util/grub-set-default.in 2010-06-03 20:34:49 +0000
+++ util/grub-set-default.in 2010-06-03 21:36:19 +0000
@@ -24,6 +24,7 @@ exec_prefix=@exec_prefix@
bindir=@bindir@
PACKAGE_NAME=@PACKAGE_NAME@
PACKAGE_VERSION=@PACKAGE_VERSION@
+defaultbootdir=@defaultbootdir@
self=`basename $0`
@@ -81,20 +82,7 @@ if test "x$entry" = x; then
fi
# Initialize these directories here, since ROOTDIR was initialized.
-case "$host_os" in
-netbsd* | openbsd*)
- # Because /boot is used for the boot block in NetBSD and OpenBSD, use /grub
- # instead of /boot/grub.
- grub_prefix=`echo /grub | sed ${transform}`
- bootdir=${rootdir}
- ;;
-*)
- # Use /boot/grub by default.
- bootdir=${rootdir}/boot
- ;;
-esac
-
-grubdir=${bootdir}/`echo grub | sed ${transform}`
+grubdir=${rootdir}${defaultbootdir}
$grub_editenv ${grubdir}/grubenv unset prev_saved_entry
$grub_editenv ${grubdir}/grubenv set saved_entry="$entry"
=== modified file 'util/grub.d/00_header.in'
--- util/grub.d/00_header.in 2010-06-02 12:57:13 +0000
+++ util/grub.d/00_header.in 2010-06-03 21:36:19 +0000
@@ -20,12 +20,12 @@ transform="@program_transform_name@"
prefix=@prefix@
exec_prefix=@exec_prefix@
-libdir=@libdir@
-grub_prefix=`echo /boot/grub | sed ${transform}`
-locale_dir=`echo /boot/grub/locale | sed ${transform}`
+pkglibrootdir=@pkglibrootdir@
+
+locale_dir=${GRUB_DIR}/locale
grub_lang=`echo $LANG | cut -d _ -f 1`
-. ${libdir}/grub/grub-mkconfig_lib
+. ${pkglibrootdir}/grub-mkconfig_lib
# Do this as early as possible, since other commands might depend on it.
# (e.g. the `loadfont' command might need lvm or raid modules)
@@ -89,7 +89,7 @@ for x in ${GRUB_TERMINAL_INPUT} ${GRUB_T
done
if [ "x$serial" = x1 ]; then
- if ! test -e ${grub_prefix}/serial.mod ; then
+ if ! test -e ${GRUB_DIR}/serial.mod ; then
echo "Serial terminal not available on this platform." >&2 ; exit 1
fi
=== modified file 'util/grub.d/10_hurd.in'
--- util/grub.d/10_hurd.in 2010-05-18 18:10:37 +0000
+++ util/grub.d/10_hurd.in 2010-06-03 21:36:19 +0000
@@ -18,8 +18,9 @@
prefix=@prefix@
exec_prefix=@exec_prefix@
-libdir=@libdir@
-. ${libdir}/grub/grub-mkconfig_lib
+pkglibrootdir=@pkglibrootdir@
+
+. ${pkglibrootdir}/grub-mkconfig_lib
CLASS="--class gnu --class os"
=== modified file 'util/grub.d/10_kfreebsd.in'
--- util/grub.d/10_kfreebsd.in 2010-04-14 12:59:58 +0000
+++ util/grub.d/10_kfreebsd.in 2010-06-03 21:36:19 +0000
@@ -19,8 +19,9 @@
prefix=@prefix@
exec_prefix=@exec_prefix@
bindir=@bindir@
-libdir=@libdir@
-. ${libdir}/grub/grub-mkconfig_lib
+pkglibrootdir=@pkglibrootdir@
+
+. ${pkglibrootdir}/grub-mkconfig_lib
export TEXTDOMAIN=@PACKAGE@
export TEXTDOMAINDIR=@localedir@
=== modified file 'util/grub.d/10_linux.in'
--- util/grub.d/10_linux.in 2010-04-14 12:59:58 +0000
+++ util/grub.d/10_linux.in 2010-06-03 21:36:19 +0000
@@ -19,8 +19,9 @@
prefix=@prefix@
exec_prefix=@exec_prefix@
bindir=@bindir@
-libdir=@libdir@
-. ${libdir}/grub/grub-mkconfig_lib
+pkglibrootdir=@pkglibrootdir@
+
+. ${pkglibrootdir}/grub-mkconfig_lib
export TEXTDOMAIN=@PACKAGE@
export TEXTDOMAINDIR=@localedir@
=== modified file 'util/grub.d/10_netbsd.in'
--- util/grub.d/10_netbsd.in 2010-04-19 19:25:41 +0000
+++ util/grub.d/10_netbsd.in 2010-06-03 21:36:19 +0000
@@ -19,8 +19,9 @@
prefix=@prefix@
exec_prefix=@exec_prefix@
bindir=@bindir@
-libdir=@libdir@
-. ${libdir}/grub/grub-mkconfig_lib
+pkglibrootdir=@pkglibrootdir@
+
+. ${pkglibrootdir}/grub-mkconfig_lib
export TEXTDOMAIN=@PACKAGE@
export TEXTDOMAINDIR=@localedir@
=== modified file 'util/grub.d/10_windows.in'
--- util/grub.d/10_windows.in 2010-05-18 19:58:49 +0000
+++ util/grub.d/10_windows.in 2010-06-03 21:36:19 +0000
@@ -18,8 +18,9 @@
prefix=@prefix@
exec_prefix=@exec_prefix@
-libdir=@libdir@
-. ${libdir}/grub/grub-mkconfig_lib
+pkglibrootdir=@pkglibrootdir@
+
+. ${pkglibrootdir}/grub-mkconfig_lib
case "`uname 2>/dev/null`" in
CYGWIN*) ;;
=== modified file 'util/grub.d/30_os-prober.in'
--- util/grub.d/30_os-prober.in 2010-02-03 00:24:07 +0000
+++ util/grub.d/30_os-prober.in 2010-06-03 21:36:19 +0000
@@ -18,9 +18,9 @@
prefix=@prefix@
exec_prefix=@exec_prefix@
-libdir=@libdir@
+pkglibrootdir=@pkglibrootdir@
-. ${libdir}/grub/grub-mkconfig_lib
+. ${pkglibrootdir}/grub-mkconfig_lib
if [ "x${GRUB_DISABLE_OS_PROBER}" = "xtrue" ]; then
exit 0
=== modified file 'util/i386/efi/grub-install.in'
--- util/i386/efi/grub-install.in 2010-06-03 20:34:49 +0000
+++ util/i386/efi/grub-install.in 2010-06-03 21:36:19 +0000
@@ -29,9 +29,10 @@ PACKAGE_TARNAME=@PACKAGE_TARNAME@
PACKAGE_VERSION=@PACKAGE_VERSION@
target_cpu=@target_cpu@
platform=@platform@
-host_os=@host_os@
-pkglibdir=${libdir}/`echo ${PACKAGE_TARNAME}/${target_cpu}-${platform} | sed ${transform}`
+pkglibrootdir=@pkglibrootdir@
+pkglibdir=${pkglibrootdir}/${target_cpu}-${platform}
localedir=@datadir@/locale
+defaultbootdir=@defaultbootdir@
self=`basename $0`
@@ -40,7 +41,6 @@ grub_mkdevicemap=${sbindir}/`echo grub-m
grub_probe=${sbindir}/`echo grub-probe | sed ${transform}`
grub_editenv=${bindir}/`echo grub-editenv | sed ${transform}`
rootdir=
-grub_prefix=`echo /boot/grub | sed ${transform}`
modules=
no_floppy=
@@ -66,7 +66,7 @@ Install GRUB on your EFI partition.
--no-floppy do not probe any floppy drive
--recheck probe a device map even if it already exists
-$self copies GRUB images into the DIR/boot directory specified by
+$self copies GRUB images into the DIR${defaultbootdir} directory specified by
--root-directory.
Report bugs to <bug-grub@gnu.org>.
@@ -113,20 +113,7 @@ if test $debug = yes; then
fi
# Initialize these directories here, since ROOTDIR was initialized.
-case "$host_os" in
-netbsd* | openbsd*)
- # Because /boot is used for the boot block in NetBSD and OpenBSD, use /grub
- # instead of /boot/grub.
- grub_prefix=`echo /grub | sed ${transform}`
- bootdir=${rootdir}
- ;;
-*)
- # Use /boot/grub by default.
- bootdir=${rootdir}/boot
- ;;
-esac
-
-grubdir=${bootdir}/`echo grub | sed ${transform}`
+grubdir=${rootdir}${defaultbootdir}
device_map=${grubdir}/device.map
# Check if GRUB is installed.
=== modified file 'util/ieee1275/grub-install.in'
--- util/ieee1275/grub-install.in 2010-06-03 20:34:49 +0000
+++ util/ieee1275/grub-install.in 2010-06-03 21:36:19 +0000
@@ -32,7 +32,9 @@ PACKAGE_TARNAME=@PACKAGE_TARNAME@
PACKAGE_VERSION=@PACKAGE_VERSION@
target_cpu=@target_cpu@
platform=@platform@
-pkglibdir=${libdir}/`echo ${PACKAGE_TARNAME}/${target_cpu}-${platform} | sed ${transform}`
+pkglibrootdir=@pkglibrootdir@
+pkglibdir=${pkglibrootdir}/${target_cpu}-${platform}
+defaultbootdir=@defaultbootdir@
self=`basename $0`
@@ -41,7 +43,6 @@ grub_mkdevicemap=${sbindir}/`echo grub-m
grub_probe=${sbindir}/`echo grub-probe | sed ${transform}`
grub_editenv=${bindir}/`echo grub-editenv | sed ${transform}`
rootdir=
-grub_prefix=`echo /boot/grub | sed ${transform}`
modules=
install_device=
@@ -68,7 +69,7 @@ Install GRUB on your drive.
--grub-probe=FILE use FILE as grub-probe
--no-nvram don't update the boot-device NVRAM variable
-$self copies GRUB images into the DIR/boot directory specified by
+$self copies GRUB images into the DIR${defaultbootdir} directory specified by
--root-directory, and uses nvsetenv to set the Open Firmware boot-device
variable.
@@ -121,8 +122,7 @@ if test $debug = yes; then
fi
# Initialize these directories here, since ROOTDIR was initialized.
-bootdir=${rootdir}/boot
-grubdir=${bootdir}/`echo grub | sed ${transform}`
+grubdir=${rootdir}${defaultbootdir}
device_map=${grubdir}/device.map
set $grub_mkimage dummy
@@ -136,7 +136,7 @@ fi
# Find the partition at the right mount point.
install_device=`$grub_mkdevicemap --device-map=/dev/stdout | $grub_probe --target=device --device-map=/dev/stdin ${grubdir}`
-if test "x$install_device" = "x`$grub_mkdevicemap --device-map=/dev/stdout | $grub_probe --target=device --device-map=/dev/stdin ${bootdir}`"; then
+if test "x$install_device" = "x`$grub_mkdevicemap --device-map=/dev/stdout | $grub_probe --target=device --device-map=/dev/stdin ${grubdir}/..`"; then
echo "$grubdir must be a mount point."
exit 1
fi
=== modified file 'util/powerpc/ieee1275/grub-mkrescue.in'
--- util/powerpc/ieee1275/grub-mkrescue.in 2010-06-03 20:34:49 +0000
+++ util/powerpc/ieee1275/grub-mkrescue.in 2010-06-03 21:36:19 +0000
@@ -28,7 +28,8 @@ PACKAGE_TARNAME=@PACKAGE_TARNAME@
PACKAGE_VERSION=@PACKAGE_VERSION@
target_cpu=@target_cpu@
platform=@platform@
-pkglibdir=${libdir}/`echo ${PACKAGE_TARNAME}/${target_cpu}-${platform} | sed ${transform}`
+pkglibrootdir=@pkglibrootdir@
+pkglibdir=${pkglibrootdir}/${target_cpu}-${platform}
self=`basename $0`
=== modified file 'util/update-grub_lib.in'
--- util/update-grub_lib.in 2008-11-20 19:22:20 +0000
+++ util/update-grub_lib.in 2010-06-03 21:36:19 +0000
@@ -16,8 +16,8 @@
prefix=@prefix@
exec_prefix=@exec_prefix@
-libdir=@libdir@
+pkglibrootdir=@pkglibrootdir@
-. ${libdir}/grub/grub-mkconfig_lib
+. ${pkglibrootdir}/grub-mkconfig_lib
grub_warn "update-grub_lib is deprecated, use grub-mkconfig_lib instead"
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #4: file-name-transformations_3.diff --]
[-- Type: text/x-patch; name="file-name-transformations_3.diff", Size: 4716 bytes --]
=== modified file 'ChangeLog'
--- ChangeLog 2010-06-03 21:36:19 +0000
+++ ChangeLog 2010-06-03 22:02:54 +0000
@@ -1,5 +1,14 @@
2010-06-03 Grégoire Sutre <gregoire.sutre@gmail.com>
+ * util/grub-install.in: Use -x instead of -f when checking for grub
+ programs, and factorize these checks by a for loop.
+ * util/grub-mkconfig.in: Likewise.
+ * util/grub-mkrescue.in: Likewise.
+ * util/i386/efi/grub-install.in: Likewise.
+ * util/ieee1275/grub-install.in: Likewise.
+
+2010-06-03 Grégoire Sutre <gregoire.sutre@gmail.com>
+
* configure.ac: Set and subsitute pkgdatadir, pkglibrootdir and
defaultbootdir.
* Makefile.in: Use the above autoconfigured variables.
=== modified file 'util/grub-install.in'
--- util/grub-install.in 2010-06-03 21:36:19 +0000
+++ util/grub-install.in 2010-06-03 22:02:54 +0000
@@ -177,7 +177,7 @@ grub_probe="${grub_probe} --device-map=$
# Check if GRUB is installed.
if [ "${target_cpu}-${platform}" = "i386-pc" ] || [ "${target_cpu}-${platform}" = "sparc64-ieee1275" ] ; then
set $grub_setup dummy
- if test -f "$1"; then
+ if test -x "$1"; then
:
else
echo "$1: Not found." 1>&2
@@ -185,21 +185,15 @@ if [ "${target_cpu}-${platform}" = "i386
fi
fi
-set $grub_mkimage dummy
-if test -f "$1"; then
- :
-else
- echo "$1: Not found." 1>&2
- exit 1
-fi
-
-set $grub_mkdevicemap dummy
-if test -f "$1"; then
- :
-else
- echo "$1: Not found." 1>&2
- exit 1
-fi
+for prog in mkimage mkdevicemap probe; do
+ eval set \$grub_$prog dummy
+ if test -x "$1"; then
+ :
+ else
+ echo "$1: Not found." 1>&2
+ exit 1
+ fi
+done
# Create the GRUB directory if it is not present.
mkdir -p "$grubdir" || exit 1
=== modified file 'util/grub-mkconfig.in'
--- util/grub-mkconfig.in 2010-06-03 21:36:19 +0000
+++ util/grub-mkconfig.in 2010-06-03 22:02:54 +0000
@@ -87,21 +87,16 @@ if $next_grub_cfg; then
exit 1
fi
-set $grub_mkdevicemap dummy
-if test -f "$1"; then
- :
-else
- echo "$1: Not found." 1>&2
- exit 1
-fi
-
-set $grub_probe dummy
-if test -f "$1"; then
- :
-else
- echo "$1: Not found." 1>&2
- exit 1
-fi
+# Check if GRUB is installed.
+for prog in mkdevicemap probe; do
+ eval set \$grub_$prog dummy
+ if test -x "$1"; then
+ :
+ else
+ echo "$1: Not found." 1>&2
+ exit 1
+ fi
+done
GRUB_DIR=${defaultbootdir}
=== modified file 'util/grub-mkrescue.in'
--- util/grub-mkrescue.in 2010-06-03 21:36:19 +0000
+++ util/grub-mkrescue.in 2010-06-03 22:02:54 +0000
@@ -103,7 +103,7 @@ if [ "x${output_image}" = x ] ; then
fi
set $grub_mkimage dummy
-if test -f "$1"; then
+if test -x "$1"; then
:
else
echo "$1: Not found." 1>&2
=== modified file 'util/i386/efi/grub-install.in'
--- util/i386/efi/grub-install.in 2010-06-03 21:36:19 +0000
+++ util/i386/efi/grub-install.in 2010-06-03 22:02:54 +0000
@@ -117,21 +117,15 @@ grubdir=${rootdir}${defaultbootdir}
device_map=${grubdir}/device.map
# Check if GRUB is installed.
-set $grub_mkimage dummy
-if test -f "$1"; then
- :
-else
- echo "$1: Not found." 1>&2
- exit 1
-fi
-
-set $grub_mkdevicemap dummy
-if test -f "$1"; then
- :
-else
- echo "$1: Not found." 1>&2
- exit 1
-fi
+for prog in mkimage mkdevicemap probe; do
+ eval set \$grub_$prog dummy
+ if test -x "$1"; then
+ :
+ else
+ echo "$1: Not found." 1>&2
+ exit 1
+ fi
+done
# Create the GRUB directory if it is not present.
mkdir -p "$grubdir" || exit 1
=== modified file 'util/ieee1275/grub-install.in'
--- util/ieee1275/grub-install.in 2010-06-03 21:36:19 +0000
+++ util/ieee1275/grub-install.in 2010-06-03 22:02:54 +0000
@@ -125,13 +125,16 @@ fi
grubdir=${rootdir}${defaultbootdir}
device_map=${grubdir}/device.map
-set $grub_mkimage dummy
-if test -f "$1"; then
- :
-else
- echo "$1: Not found." 1>&2
- exit 1
-fi
+# Check if GRUB is installed.
+for prog in mkimage mkdevicemap probe; do
+ eval set \$grub_$prog dummy
+ if test -x "$1"; then
+ :
+ else
+ echo "$1: Not found." 1>&2
+ exit 1
+ fi
+done
# Find the partition at the right mount point.
install_device=`$grub_mkdevicemap --device-map=/dev/stdout | $grub_probe --target=device --device-map=/dev/stdin ${grubdir}`
@@ -195,7 +198,7 @@ modules="$modules $fs_module $partmap_mo
if test $update_nvram = yes; then
set $ofpathname dummy
- if test -f "$1"; then
+ if test -x "$1"; then
:
else
echo "$1: Not found." 1>&2
@@ -203,7 +206,7 @@ if test $update_nvram = yes; then
fi
set $nvsetenv dummy
- if test -f "$1"; then
+ if test -x "$1"; then
:
else
echo "$1: Not found." 1>&2
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #5: file-name-transformations_4.diff --]
[-- Type: text/x-patch; name="file-name-transformations_4.diff", Size: 1168 bytes --]
=== modified file 'ChangeLog'
--- ChangeLog 2010-06-03 22:02:54 +0000
+++ ChangeLog 2010-06-03 22:06:21 +0000
@@ -1,5 +1,9 @@
2010-06-03 Grégoire Sutre <gregoire.sutre@gmail.com>
+ * configure.ac: Add `.' to the directories searched for unifont.
+
+2010-06-03 Grégoire Sutre <gregoire.sutre@gmail.com>
+
* util/grub-install.in: Use -x instead of -f when checking for grub
programs, and factorize these checks by a for loop.
* util/grub-mkconfig.in: Likewise.
=== modified file 'configure.ac'
--- configure.ac 2010-06-03 21:36:19 +0000
+++ configure.ac 2010-06-03 22:06:21 +0000
@@ -179,11 +179,13 @@ if test "x$YACC" = x; then
AC_MSG_ERROR([bison is not found])
fi
-for file in /usr/src/unifont.bdf /usr/share/fonts/X11/misc/unifont.pcf.gz /usr/share/fonts/unifont/unifont.pcf.gz; do
- if test -e $file ; then
- AC_SUBST([FONT_SOURCE], [$file])
- break
- fi
+for ext in pcf pcf.gz bdf bdf.gz ttf ttf.gz; do
+ for dir in . /usr/src /usr/share/fonts/X11/misc /usr/share/fonts/unifont; do
+ if test -f "$dir/unifont.$ext"; then
+ AC_SUBST([FONT_SOURCE], [$dir/unifont.$ext])
+ break 2
+ fi
+ done
done
AC_PROG_INSTALL
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #6: file-name-transformations_5.diff --]
[-- Type: text/x-patch; name="file-name-transformations_5.diff", Size: 3688 bytes --]
=== modified file 'ChangeLog'
--- ChangeLog 2010-06-03 22:06:21 +0000
+++ ChangeLog 2010-06-03 22:15:52 +0000
@@ -1,5 +1,12 @@
2010-06-03 Grégoire Sutre <gregoire.sutre@gmail.com>
+ * Makefile.in (install-local): Use installed files on help2man command
+ line to account for file name transformations. Apply transformations
+ to generated info file.
+ (uninstall): Apply transformations to generated info file.
+
+2010-06-03 Grégoire Sutre <gregoire.sutre@gmail.com>
+
* configure.ac: Add `.' to the directories searched for unifont.
2010-06-03 Grégoire Sutre <gregoire.sutre@gmail.com>
=== modified file 'Makefile.in'
--- Makefile.in 2010-06-03 21:36:19 +0000
+++ Makefile.in 2010-06-03 22:15:52 +0000
@@ -324,26 +324,26 @@ install-local: all
if test -f "$$file"; then dir=; else dir="$(srcdir)/"; fi; \
dest="`echo $$file | sed 's,.*/,,' | sed '$(transform)'`"; \
$(INSTALL_PROGRAM) $$dir$$file $(DESTDIR)$(bindir)/$$dest; \
- $(HELP2MAN) --section=1 -o $(DESTDIR)$(mandir)/man1/$$dest.1 $(builddir)/$$file; \
+ $(HELP2MAN) --section=1 -o $(DESTDIR)$(mandir)/man1/$$dest.1 $(DESTDIR)$(bindir)/$$dest; \
done
$(SHELL) $(mkinstalldirs) $(DESTDIR)$(sbindir) $(DESTDIR)$(mandir)/man8
@list='$(sbin_UTILITIES)'; for file in $$list; do \
if test -f "$$file"; then dir=; else dir="$(srcdir)/"; fi; \
dest="`echo $$file | sed 's,.*/,,' | sed '$(transform)'`"; \
$(INSTALL_PROGRAM) $$dir$$file $(DESTDIR)$(sbindir)/$$dest; \
- $(HELP2MAN) --section=8 -o $(DESTDIR)$(mandir)/man8/$$dest.8 $(builddir)/$$file; \
+ $(HELP2MAN) --section=8 -o $(DESTDIR)$(mandir)/man8/$$dest.8 $(DESTDIR)$(sbindir)/$$dest; \
done
@list='$(bin_SCRIPTS)'; for file in $$list; do \
if test -f "$$file"; then dir=; else dir="$(srcdir)/"; fi; \
dest="`echo $$file | sed 's,.*/,,' | sed '$(transform)'`"; \
$(INSTALL_SCRIPT) $$dir$$file $(DESTDIR)$(bindir)/$$dest; \
- $(HELP2MAN) --section=1 -o $(DESTDIR)$(mandir)/man1/$$dest.1 $(builddir)/$$file; \
+ $(HELP2MAN) --section=1 -o $(DESTDIR)$(mandir)/man1/$$dest.1 $(DESTDIR)$(bindir)/$$dest; \
done
@list='$(sbin_SCRIPTS)'; for file in $$list; do \
if test -f "$$file"; then dir=; else dir="$(srcdir)/"; fi; \
dest="`echo $$file | sed 's,.*/,,' | sed '$(transform)'`"; \
$(INSTALL_SCRIPT) $$dir$$file $(DESTDIR)$(sbindir)/$$dest; \
- $(HELP2MAN) --section=8 -o $(DESTDIR)$(mandir)/man8/$$dest.8 $(builddir)/$$file; \
+ $(HELP2MAN) --section=8 -o $(DESTDIR)$(mandir)/man8/$$dest.8 $(DESTDIR)$(sbindir)/$$dest; \
done
$(SHELL) $(mkinstalldirs) $(DESTDIR)$(sysconfdir)/grub.d
@list='$(grub-mkconfig_SCRIPTS)'; for file in $$list; do \
@@ -374,8 +374,8 @@ install-local: all
@list='$(info_INFOS)'; \
for file in $$list; do \
if test -f "$$file"; then dir=; else dir="$(srcdir)/"; fi; \
- dest="`echo $$file | sed 's,.*/,,'`"; \
- $(INSTALL_DATA) $$dir$$file $(DESTDIR)$(infodir); \
+ dest="`echo $$file | sed 's,.*/,,' | sed '$(transform)'`"; \
+ $(INSTALL_DATA) $$dir$$file $(DESTDIR)$(infodir)/$$dest; \
if (install-info --version && \
install-info --version 2>&1 | sed 1q | grep -i -v debian) >/dev/null 2>&1; then \
install-info --info-dir="$(DESTDIR)$(infodir)" "$(DESTDIR)$(infodir)/$$dest" || :; \
@@ -417,7 +417,7 @@ uninstall:
done
@list='$(info_INFOS)'; \
for file in $$list; do \
- dest="`echo $$file | sed 's,.*/,,'`"; \
+ dest="`echo $$file | sed 's,.*/,,' | sed '$(transform)'`"; \
if (install-info --version && \
install-info --version 2>&1 | sed 1q | grep -i -v debian) >/dev/null 2>&1; then \
if install-info --info-dir="$(DESTDIR)$(infodir)" --remove "$(DESTDIR)$(infodir)/$$dest"; then \
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #7: file-name-transformations_6.diff --]
[-- Type: text/x-patch; name="file-name-transformations_6.diff", Size: 3588 bytes --]
=== modified file 'ChangeLog'
--- ChangeLog 2010-06-03 22:15:52 +0000
+++ ChangeLog 2010-06-03 22:23:22 +0000
@@ -1,5 +1,12 @@
2010-06-03 Grégoire Sutre <gregoire.sutre@gmail.com>
+ * Makefile.in (install-local): Apply file name transformations to
+ generated locale (*.mo) files.
+ * util/grub-install.in: Likewise.
+ * util/i386/efi/grub-install.in: Likewise.
+
+2010-06-03 Grégoire Sutre <gregoire.sutre@gmail.com>
+
* Makefile.in (install-local): Use installed files on help2man command
line to account for file name transformations. Apply transformations
to generated info file.
=== modified file 'Makefile.in'
--- Makefile.in 2010-06-03 22:15:52 +0000
+++ Makefile.in 2010-06-03 22:23:22 +0000
@@ -365,10 +365,11 @@ install-local: all
done
@langs='$(LINGUAS)'; \
for lang in $$langs; do \
- $(SHELL) $(mkinstalldirs) $(DESTDIR)/$(datadir)/locale/$$lang/LC_MESSAGES; \
+ $(SHELL) $(mkinstalldirs) $(DESTDIR)$(datadir)/locale/$$lang/LC_MESSAGES; \
file="po/$$lang.mo"; \
if test -f "$$file"; then dir=; else dir="$(srcdir)/"; fi; \
- $(INSTALL_DATA) $$dir$$file $(DESTDIR)/$(datadir)/locale/$$lang/LC_MESSAGES/$(PACKAGE).mo; \
+ dest="`echo $(PACKAGE).mo | sed 's,.*/,,' | sed '$(transform)'`"; \
+ $(INSTALL_DATA) $$dir$$file $(DESTDIR)$(datadir)/locale/$$lang/LC_MESSAGES/$$dest; \
done
$(SHELL) $(mkinstalldirs) $(DESTDIR)$(infodir)
@list='$(info_INFOS)'; \
=== modified file 'util/grub-install.in'
--- util/grub-install.in 2010-06-03 22:02:54 +0000
+++ util/grub-install.in 2010-06-03 22:23:22 +0000
@@ -24,6 +24,7 @@ exec_prefix=@exec_prefix@
sbindir=@sbindir@
bindir=@bindir@
libdir=@libdir@
+PACKAGE=@PACKAGE@
PACKAGE_NAME=@PACKAGE_NAME@
PACKAGE_TARNAME=@PACKAGE_TARNAME@
PACKAGE_VERSION=@PACKAGE_VERSION@
@@ -42,6 +43,7 @@ grub_mkimage=${bindir}/`echo grub-mkimag
grub_mkdevicemap=${sbindir}/`echo grub-mkdevicemap | sed ${transform}`
grub_probe=${sbindir}/`echo grub-probe | sed ${transform}`
grub_editenv=${bindir}/`echo grub-editenv | sed ${transform}`
+grub_mofile=`echo ${PACKAGE}.mo | sed ${transform}`
rootdir=
modules=
@@ -241,8 +243,8 @@ fi
# Copy gettext files
mkdir -p ${grubdir}/locale/
for dir in ${localedir}/*; do
- if test -f "$dir/LC_MESSAGES/grub.mo"; then
- cp -f "$dir/LC_MESSAGES/grub.mo" "${grubdir}/locale/${dir##*/}.mo"
+ if test -f "$dir/LC_MESSAGES/${grub_mofile}"; then
+ cp -f "$dir/LC_MESSAGES/${grub_mofile}" "${grubdir}/locale/${dir##*/}.mo"
fi
done
=== modified file 'util/i386/efi/grub-install.in'
--- util/i386/efi/grub-install.in 2010-06-03 22:02:54 +0000
+++ util/i386/efi/grub-install.in 2010-06-03 22:23:22 +0000
@@ -24,6 +24,7 @@ exec_prefix=@exec_prefix@
sbindir=@sbindir@
bindir=@bindir@
libdir=@libdir@
+PACKAGE=@PACKAGE@
PACKAGE_NAME=@PACKAGE_NAME@
PACKAGE_TARNAME=@PACKAGE_TARNAME@
PACKAGE_VERSION=@PACKAGE_VERSION@
@@ -40,6 +41,7 @@ grub_mkimage=${bindir}/`echo grub-mkimag
grub_mkdevicemap=${sbindir}/`echo grub-mkdevicemap | sed ${transform}`
grub_probe=${sbindir}/`echo grub-probe | sed ${transform}`
grub_editenv=${bindir}/`echo grub-editenv | sed ${transform}`
+grub_mofile=`echo ${PACKAGE}.mo | sed ${transform}`
rootdir=
modules=
@@ -166,8 +168,8 @@ done
# Copy gettext files
mkdir -p ${grubdir}/locale/
for dir in ${localedir}/*; do
- if test -f "$dir/LC_MESSAGES/grub.mo"; then
- cp -f "$dir/LC_MESSAGES/grub.mo" "${grubdir}/locale/${dir##*/}.mo"
+ if test -f "$dir/LC_MESSAGES/${grub_mofile}"; then
+ cp -f "$dir/LC_MESSAGES/${grub_mofile}" "${grubdir}/locale/${dir##*/}.mo"
fi
done
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #8: file-name-transformations_7.diff --]
[-- Type: text/x-patch; name="file-name-transformations_7.diff", Size: 3645 bytes --]
=== modified file 'ChangeLog'
--- ChangeLog 2010-06-03 22:23:22 +0000
+++ ChangeLog 2010-06-03 22:35:21 +0000
@@ -1,5 +1,13 @@
2010-06-03 Grégoire Sutre <gregoire.sutre@gmail.com>
+ * util/grub-install.in: Remove the dependency on grub-mkconfig_lib.
+ * util/grub-mkconfig_lib.in (prepare_grub_to_access_device): Fix typo
+ in partmap module loading.
+ * util/grub.d/00_header.in: Check for non-empty LANG in locale support.
+ * util/grub.d/10_netbsd.in: Added a comment.
+
+2010-06-03 Grégoire Sutre <gregoire.sutre@gmail.com>
+
* Makefile.in (install-local): Apply file name transformations to
generated locale (*.mo) files.
* util/grub-install.in: Likewise.
=== modified file 'util/grub-install.in'
--- util/grub-install.in 2010-06-03 22:23:22 +0000
+++ util/grub-install.in 2010-06-03 22:35:21 +0000
@@ -41,6 +41,7 @@ self=`basename $0`
grub_setup=${sbindir}/`echo grub-setup | sed ${transform}`
grub_mkimage=${bindir}/`echo grub-mkimage | sed ${transform}`
grub_mkdevicemap=${sbindir}/`echo grub-mkdevicemap | sed ${transform}`
+grub_mkrelpath=${bindir}/`echo grub-mkrelpath | sed ${transform}`
grub_probe=${sbindir}/`echo grub-probe | sed ${transform}`
grub_editenv=${bindir}/`echo grub-editenv | sed ${transform}`
grub_mofile=`echo ${PACKAGE}.mo | sed ${transform}`
@@ -154,9 +155,6 @@ for option in "$@"; do
esac
done
-# for make_system_path_relative_to_its_root()
-. ${pkglibrootdir}/grub-mkconfig_lib
-
if test "x$install_device" = x && test "${target_cpu}-${platform}" != "mips-yeeloong"; then
echo "install_device not specified." 1>&2
usage
@@ -187,7 +185,7 @@ if [ "${target_cpu}-${platform}" = "i386
fi
fi
-for prog in mkimage mkdevicemap probe; do
+for prog in mkimage mkdevicemap mkrelpath probe; do
eval set \$grub_$prog dummy
if test -x "$1"; then
:
@@ -278,7 +276,7 @@ devabstraction_module=`$grub_probe --tar
modules="$modules $disk_module"
modules="$modules $fs_module $partmap_module $devabstraction_module"
-relative_grubdir=`make_system_path_relative_to_its_root ${grubdir}` || exit 1
+relative_grubdir=`$grub_mkrelpath ${grubdir}` || exit 1
if [ "x${relative_grubdir}" = "x" ] ; then
relative_grubdir=/
fi
=== modified file 'util/grub-mkconfig_lib.in'
--- util/grub-mkconfig_lib.in 2010-06-03 21:36:19 +0000
+++ util/grub-mkconfig_lib.in 2010-06-03 22:35:21 +0000
@@ -114,7 +114,7 @@ prepare_grub_to_access_device ()
partmap="`${grub_probe} --device ${device} --target=partmap`"
for module in ${partmap} ; do
- echo "insmod ${module}"
+ echo "insmod part_${module}"
done
fs="`${grub_probe} --device ${device} --target=fs`"
=== modified file 'util/grub.d/00_header.in'
--- util/grub.d/00_header.in 2010-06-03 21:36:19 +0000
+++ util/grub.d/00_header.in 2010-06-03 22:35:21 +0000
@@ -195,7 +195,7 @@ EOF
esac
# Gettext variables and module
-if [ "x${LANG}" != "xC" ] && [ -d "${locale_dir}" ] ; then
+if [ "x${LANG}" != "x" ] && [ "x${LANG}" != "xC" ] && [ -d "${locale_dir}" ] ; then
prepare_grub_to_access_device $(${grub_probe} --target=device ${locale_dir})
cat << EOF
set locale_dir=(\$root)$(make_system_path_relative_to_its_root ${locale_dir})
=== modified file 'util/grub.d/10_netbsd.in'
--- util/grub.d/10_netbsd.in 2010-06-03 21:36:19 +0000
+++ util/grub.d/10_netbsd.in 2010-06-03 22:35:21 +0000
@@ -62,6 +62,7 @@ netbsd_entry ()
printf "}\n"
}
+# Cache the sequence of commands to access / (whose device is ${GRUB_DEVICE}).
prepare_boot_cache="$(prepare_grub_to_access_device ${GRUB_DEVICE} | sed -e 's,^, ,')"
# We look for NetBSD kernels in / but not in subdirectories. We simply
next reply other threads:[~2010-06-03 23:43 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-06-03 23:42 Grégoire Sutre [this message]
2010-06-07 21:16 ` [PATCH] File name transformations (split into 7 diffs) Vladimir 'φ-coder/phcoder' Serbinenko
2010-06-07 22:56 ` Grégoire Sutre
2010-07-21 5:11 ` Vladimir 'φ-coder/phcoder' Serbinenko
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4C083DF0.6080508@gmail.com \
--to=gregoire.sutre@gmail.com \
--cc=grub-devel@gnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.