* iproute addr flush question
@ 2010-06-22 22:46 Ben Greear
0 siblings, 0 replies; only message in thread
From: Ben Greear @ 2010-06-22 22:46 UTC (permalink / raw)
To: NetDev
Is this supposed to work? I was hoping there was some way to
flush all secondary IPs with a single command:
[root@atom lanforge]# ./local/sbin/ip addr flush dev eth5 secondary
[root@atom lanforge]# ip addr show dev eth5
8: eth5: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast state DOWN qlen 1000
link/ether 00:90:0b:13:f4:e9 brd ff:ff:ff:ff:ff:ff
inet 6.6.6.1/24 brd 6.6.6.255 scope global eth5
inet 6.6.6.2/24 scope global secondary eth5
inet 6.6.6.3/24 scope global secondary eth5
This is .34 kernel and .34 matching iproute.
Thanks,
Ben
--
Ben Greear <greearb@candelatech.com>
Candela Technologies Inc http://www.candelatech.com
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2010-06-22 22:46 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2010-06-22 22:46 iproute addr flush question Ben Greear
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.