[tip:x86/urgent] nvram: Fix write beyond end condition; prove to gcc copy is safe

[tip:x86/urgent] nvram: Fix write beyond end condition; prove to gcc copy is safe

[tip-bot for H. Peter Anvin]

Commit-ID:  a01c7800420d2c294ca403988488a635d4087a6d
Gitweb:     http://git.kernel.org/tip/a01c7800420d2c294ca403988488a635d4087a6d
Author:     H. Peter Anvin <hpa@zytor.com>
AuthorDate: Fri, 11 Dec 2009 15:48:23 -0800
Committer:  H. Peter Anvin <hpa@zytor.com>
CommitDate: Fri, 11 Dec 2009 15:48:23 -0800

nvram: Fix write beyond end condition; prove to gcc copy is safe

In nvram_write, first of all, correctly handle the case where the file
pointer is already beyond the end; we should return EOF in that case.

Second, make the logic a bit more explicit so that gcc can statically
prove that the copy_from_user() is safe.  Once the condition of the
beyond-end filepointer is eliminated, the copy is safe but gcc can't
prove it, causing build failures for i386 allyesconfig.

Third, eliminate the entirely superfluous variable "len", and just use
the passed-in variable "count" instead.

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Cc: Arjan van de Ven <arjan@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Wim Van Sebroeck <wim@iguana.be>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <tip-*@git.kernel.org>
---
 drivers/char/nvram.c |   14 ++++++++++----
 1 files changed, 10 insertions(+), 4 deletions(-)

diff --git a/drivers/char/nvram.c b/drivers/char/nvram.c
index 4008e2c..fdbcc9f 100644
--- a/drivers/char/nvram.c
+++ b/drivers/char/nvram.c
@@ -264,10 +264,16 @@ static ssize_t nvram_write(struct file *file, const char __user *buf,
 	unsigned char contents[NVRAM_BYTES];
 	unsigned i = *ppos;
 	unsigned char *tmp;
-	int len;
 
-	len = (NVRAM_BYTES - i) < count ? (NVRAM_BYTES - i) : count;
-	if (copy_from_user(contents, buf, len))
+	if (i >= NVRAM_BYTES)
+		return 0;	/* Past EOF */
+
+	if (count > NVRAM_BYTES - i)
+		count = NVRAM_BYTES - i;
+	if (count > NVRAM_BYTES)
+		return -EFAULT;	/* Can't happen, but prove it to gcc */
+
+	if (copy_from_user(contents, buf, count))
 		return -EFAULT;
 
 	spin_lock_irq(&rtc_lock);
@@ -275,7 +281,7 @@ static ssize_t nvram_write(struct file *file, const char __user *buf,
 	if (!__nvram_check_checksum())
 		goto checksum_err;
 
-	for (tmp = contents; count-- > 0 && i < NVRAM_BYTES; ++i, ++tmp)
+	for (tmp = contents; count--; ++i, ++tmp)
 		__nvram_write_byte(*tmp, i);
 
 	__nvram_set_checksum();

[tip:x86/urgent] x86, msr/cpuid: Register enough minors for the MSR and CPUID drivers

[tip-bot for H. Peter Anvin]

Commit-ID:  0b962d473af32ec334df271b54ff4973cb2b4c73
Gitweb:     http://git.kernel.org/tip/0b962d473af32ec334df271b54ff4973cb2b4c73
Author:     H. Peter Anvin <hpa@zytor.com>
AuthorDate: Tue, 15 Dec 2009 15:13:07 -0800
Committer:  H. Peter Anvin <hpa@zytor.com>
CommitDate: Tue, 15 Dec 2009 15:13:07 -0800

x86, msr/cpuid: Register enough minors for the MSR and CPUID drivers

register_chrdev() hardcodes registering 256 minors, presumably to
avoid breaking old drivers.  However, we need to register enough
minors so that we have all possible CPUs.

checkpatch warns on this patch, but the patch is correct: NR_CPUS here
is a static *upper bound* on the *maximum CPU index* (not *number of
CPUs!*) and that is what we want.

Reported-and-tested-by: Russ Anderson <rja@sgi.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
LKML-Reference: <tip-*@git.kernel.org>
---
 arch/x86/kernel/cpuid.c |    5 +++--
 arch/x86/kernel/msr.c   |    4 ++--
 2 files changed, 5 insertions(+), 4 deletions(-)

diff --git a/arch/x86/kernel/cpuid.c b/arch/x86/kernel/cpuid.c
index 7ef24a7..cb27fd6 100644
--- a/arch/x86/kernel/cpuid.c
+++ b/arch/x86/kernel/cpuid.c
@@ -187,7 +187,8 @@ static int __init cpuid_init(void)
 	int i, err = 0;
 	i = 0;
 
-	if (register_chrdev(CPUID_MAJOR, "cpu/cpuid", &cpuid_fops)) {
+	if (__register_chrdev(CPUID_MAJOR, 0, NR_CPUS,
+			      "cpu/cpuid", &cpuid_fops)) {
 		printk(KERN_ERR "cpuid: unable to get major %d for cpuid\n",
 		       CPUID_MAJOR);
 		err = -EBUSY;
@@ -216,7 +217,7 @@ out_class:
 	}
 	class_destroy(cpuid_class);
 out_chrdev:
-	unregister_chrdev(CPUID_MAJOR, "cpu/cpuid");
+	__unregister_chrdev(CPUID_MAJOR, 0, NR_CPUS, "cpu/cpuid");
 out:
 	return err;
 }
diff --git a/arch/x86/kernel/msr.c b/arch/x86/kernel/msr.c
index 572b07e..4bd93c9 100644
--- a/arch/x86/kernel/msr.c
+++ b/arch/x86/kernel/msr.c
@@ -246,7 +246,7 @@ static int __init msr_init(void)
 	int i, err = 0;
 	i = 0;
 
-	if (register_chrdev(MSR_MAJOR, "cpu/msr", &msr_fops)) {
+	if (__register_chrdev(MSR_MAJOR, 0, NR_CPUS, "cpu/msr", &msr_fops)) {
 		printk(KERN_ERR "msr: unable to get major %d for msr\n",
 		       MSR_MAJOR);
 		err = -EBUSY;
@@ -274,7 +274,7 @@ out_class:
 		msr_device_destroy(i);
 	class_destroy(msr_class);
 out_chrdev:
-	unregister_chrdev(MSR_MAJOR, "cpu/msr");
+	__unregister_chrdev(MSR_MAJOR, 0, NR_CPUS, "cpu/msr");
 out:
 	return err;
 }

[tip:x86/setup] x86-64, setup: Inhibit decompressor output if video info is invalid

[tip-bot for H. Peter Anvin]

Commit-ID:  eb572a5c7951288e265b3e8f9a5d37b6abb2e996
Gitweb:     http://git.kernel.org/tip/eb572a5c7951288e265b3e8f9a5d37b6abb2e996
Author:     H. Peter Anvin <hpa@zytor.com>
AuthorDate: Thu, 18 Feb 2010 22:15:04 -0800
Committer:  H. Peter Anvin <hpa@zytor.com>
CommitDate: Thu, 18 Feb 2010 22:15:04 -0800

x86-64, setup: Inhibit decompressor output if video info is invalid

Inhibit output from the kernel decompressor if the video information
is invalid.  This was already the case for 32 bits, make 64 bits
match.

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
LKML-Reference: <tip-*@git.kernel.org>
---
 arch/x86/boot/compressed/misc.c |    2 --
 1 files changed, 0 insertions(+), 2 deletions(-)

diff --git a/arch/x86/boot/compressed/misc.c b/arch/x86/boot/compressed/misc.c
index 3b22fe8..3487e86 100644
--- a/arch/x86/boot/compressed/misc.c
+++ b/arch/x86/boot/compressed/misc.c
@@ -185,11 +185,9 @@ static void __putstr(int error, const char *s)
 		return;
 #endif
 
-#ifdef CONFIG_X86_32
 	if (real_mode->screen_info.orig_video_mode == 0 &&
 	    lines == 0 && cols == 0)
 		return;
-#endif
 
 	x = real_mode->screen_info.orig_x;
 	y = real_mode->screen_info.orig_y;

[tip:x86/setup] x86, setup: Don't skip mode setting for the standard VGA modes

[tip-bot for H. Peter Anvin]

Commit-ID:  8e92dc767abb58357e696a48fc3d8ce615a9c01a
Gitweb:     http://git.kernel.org/tip/8e92dc767abb58357e696a48fc3d8ce615a9c01a
Author:     H. Peter Anvin <hpa@zytor.com>
AuthorDate: Fri, 19 Feb 2010 13:21:38 -0800
Committer:  H. Peter Anvin <hpa@zytor.com>
CommitDate: Fri, 19 Feb 2010 13:21:38 -0800

x86, setup: Don't skip mode setting for the standard VGA modes

The code for setting standard VGA modes probes for the current mode,
and skips the mode setting if the mode is 3 (color text 80x25) or 7
(mono text 80x25).  Unfortunately, there are BIOSes, including the
VMware BIOS, which report the previous mode if function 0F is queried
while the screen is in a VESA mode, and of course, nothing can help a
mode poked directly into the hardware.

As such, the safe option is to set the mode anyway, and only query to
see if we should be using mode 7 rather than mode 3.  People who don't
want any mode setting at all should probably use vga=0x0f04
(VIDEO_CURRENT_MODE).  It's possible that should be the kernel
default.

Reported-by Rene Arends <R.R.Arends@hro.nl>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
LKML-Reference: <tip-*@git.kernel.org>
---
 arch/x86/boot/video-vga.c |    9 +--------
 1 files changed, 1 insertions(+), 8 deletions(-)

diff --git a/arch/x86/boot/video-vga.c b/arch/x86/boot/video-vga.c
index 819caa1..ed7aeff 100644
--- a/arch/x86/boot/video-vga.c
+++ b/arch/x86/boot/video-vga.c
@@ -42,22 +42,15 @@ static u8 vga_set_basic_mode(void)
 {
 	struct biosregs ireg, oreg;
 	u16 ax;
-	u8 rows;
 	u8 mode;
 
 	initregs(&ireg);
 
+	/* Query current mode */
 	ax = 0x0f00;
 	intcall(0x10, &ireg, &oreg);
 	mode = oreg.al;
 
-	set_fs(0);
-	rows = rdfs8(0x484);	/* rows minus one */
-
-	if ((oreg.ax == 0x5003 || oreg.ax == 0x5007) &&
-	    (rows == 0 || rows == 24))
-		return mode;
-
 	if (mode != 3 && mode != 7)
 		mode = 3;
 

[tip:x86/alternatives] x86, alternatives: Use 16-bit numbers for cpufeature index

[tip-bot for H. Peter Anvin]

Commit-ID:  f88731e3068f9d1392ba71cc9f50f035d26a0d4f
Gitweb:     http://git.kernel.org/tip/f88731e3068f9d1392ba71cc9f50f035d26a0d4f
Author:     H. Peter Anvin <hpa@linux.intel.com>
AuthorDate: Wed, 9 Jun 2010 16:03:09 -0700
Committer:  H. Peter Anvin <hpa@linux.intel.com>
CommitDate: Wed, 9 Jun 2010 16:03:09 -0700

x86, alternatives: Use 16-bit numbers for cpufeature index

We already have cpufeature indicies above 255, so use a 16-bit number
for the alternatives index.  This consumes a padding field and so
doesn't add any size, but it means that abusing the padding field to
create assembly errors on overflow no longer works.  We can retain the
test simply by redirecting it to the .discard section, however.

Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
LKML-Reference: <tip-*@git.kernel.org>
---
 arch/x86/include/asm/alternative.h |    7 ++++---
 arch/x86/include/asm/cpufeature.h  |   10 ++++++----
 2 files changed, 10 insertions(+), 7 deletions(-)

diff --git a/arch/x86/include/asm/alternative.h b/arch/x86/include/asm/alternative.h
index 03b6bb5..bc6abb7 100644
--- a/arch/x86/include/asm/alternative.h
+++ b/arch/x86/include/asm/alternative.h
@@ -45,10 +45,9 @@
 struct alt_instr {
 	u8 *instr;		/* original instruction */
 	u8 *replacement;
-	u8  cpuid;		/* cpuid bit set for replacement */
+	u16 cpuid;		/* cpuid bit set for replacement */
 	u8  instrlen;		/* length of original instruction */
 	u8  replacementlen;	/* length of new instruction, <= instrlen */
-	u8  pad1;
 #ifdef CONFIG_X86_64
 	u32 pad2;
 #endif
@@ -86,9 +85,11 @@ static inline int alternatives_text_reserved(void *start, void *end)
       _ASM_ALIGN "\n"							\
       _ASM_PTR "661b\n"				/* label           */	\
       _ASM_PTR "663f\n"				/* new instruction */	\
-      "	 .byte " __stringify(feature) "\n"	/* feature bit     */	\
+      "	 .word " __stringify(feature) "\n"	/* feature bit     */	\
       "	 .byte 662b-661b\n"			/* sourcelen       */	\
       "	 .byte 664f-663f\n"			/* replacementlen  */	\
+      ".previous\n"							\
+      ".section .discard,\"aw\",@progbits\n"				\
       "	 .byte 0xff + (664f-663f) - (662b-661b)\n" /* rlen <= slen */	\
       ".previous\n"							\
       ".section .altinstr_replacement, \"ax\"\n"			\
diff --git a/arch/x86/include/asm/cpufeature.h b/arch/x86/include/asm/cpufeature.h
index 4681459..66878c5 100644
--- a/arch/x86/include/asm/cpufeature.h
+++ b/arch/x86/include/asm/cpufeature.h
@@ -300,11 +300,11 @@ static __always_inline __pure bool __static_cpu_has(u8 bit)
 			 _ASM_ALIGN "\n"
 			 _ASM_PTR "1b\n"
 			 _ASM_PTR "0\n" 	/* no replacement */
-			 " .byte %P0\n"		/* feature bit */
+			 " .word %P0\n"		/* feature bit */
 			 " .byte 2b - 1b\n"	/* source len */
 			 " .byte 0\n"		/* replacement len */
-			 " .byte 0xff + 0 - (2b-1b)\n"	/* padding */
 			 ".previous\n"
+			 /* skipping size check since replacement size = 0 */
 			 : : "i" (bit) : : t_no);
 		return true;
 	t_no:
@@ -318,10 +318,12 @@ static __always_inline __pure bool __static_cpu_has(u8 bit)
 			     _ASM_ALIGN "\n"
 			     _ASM_PTR "1b\n"
 			     _ASM_PTR "3f\n"
-			     " .byte %P1\n"		/* feature bit */
+			     " .word %P1\n"		/* feature bit */
 			     " .byte 2b - 1b\n"		/* source len */
 			     " .byte 4f - 3f\n"		/* replacement len */
-			     " .byte 0xff + (4f-3f) - (2b-1b)\n" /* padding */
+			     ".previous\n"
+			     ".section .discard,\"aw\",@progbits\n"
+			     " .byte 0xff + (4f-3f) - (2b-1b)\n" /* size check */
 			     ".previous\n"
 			     ".section .altinstr_replacement,\"ax\"\n"
 			     "3: movb $1,%0\n"

[tip:x86/alternatives] x86, alternatives: Use 16-bit numbers for cpufeature index

[tip-bot for H. Peter Anvin]

Commit-ID:  884c4f15783495e42a628b7f31d2dff60ec9cd17
Gitweb:     http://git.kernel.org/tip/884c4f15783495e42a628b7f31d2dff60ec9cd17
Author:     H. Peter Anvin <hpa@linux.intel.com>
AuthorDate: Wed, 9 Jun 2010 16:03:09 -0700
Committer:  H. Peter Anvin <hpa@linux.intel.com>
CommitDate: Fri, 11 Jun 2010 11:22:39 -0700

x86, alternatives: Use 16-bit numbers for cpufeature index

We already have cpufeature indicies above 255, so use a 16-bit number
for the alternatives index.  This consumes a padding field and so
doesn't add any size, but it means that abusing the padding field to
create assembly errors on overflow no longer works.  We can retain the
test simply by redirecting it to the .discard section, however.

[ v2: fix open-coded alternatives sites ]

Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
LKML-Reference: <tip-f88731e3068f9d1392ba71cc9f50f035d26a0d4f@git.kernel.org>
---
 arch/x86/include/asm/alternative.h |    7 ++++---
 arch/x86/include/asm/cpufeature.h  |   10 ++++++----
 arch/x86/kernel/entry_32.S         |    2 +-
 arch/x86/lib/clear_page_64.S       |    2 +-
 arch/x86/lib/copy_page_64.S        |    2 +-
 arch/x86/lib/copy_user_64.S        |    2 +-
 arch/x86/lib/memcpy_64.S           |    2 +-
 arch/x86/lib/memset_64.S           |    2 +-
 8 files changed, 16 insertions(+), 13 deletions(-)

diff --git a/arch/x86/include/asm/alternative.h b/arch/x86/include/asm/alternative.h
index 03b6bb5..bc6abb7 100644
--- a/arch/x86/include/asm/alternative.h
+++ b/arch/x86/include/asm/alternative.h
@@ -45,10 +45,9 @@
 struct alt_instr {
 	u8 *instr;		/* original instruction */
 	u8 *replacement;
-	u8  cpuid;		/* cpuid bit set for replacement */
+	u16 cpuid;		/* cpuid bit set for replacement */
 	u8  instrlen;		/* length of original instruction */
 	u8  replacementlen;	/* length of new instruction, <= instrlen */
-	u8  pad1;
 #ifdef CONFIG_X86_64
 	u32 pad2;
 #endif
@@ -86,9 +85,11 @@ static inline int alternatives_text_reserved(void *start, void *end)
       _ASM_ALIGN "\n"							\
       _ASM_PTR "661b\n"				/* label           */	\
       _ASM_PTR "663f\n"				/* new instruction */	\
-      "	 .byte " __stringify(feature) "\n"	/* feature bit     */	\
+      "	 .word " __stringify(feature) "\n"	/* feature bit     */	\
       "	 .byte 662b-661b\n"			/* sourcelen       */	\
       "	 .byte 664f-663f\n"			/* replacementlen  */	\
+      ".previous\n"							\
+      ".section .discard,\"aw\",@progbits\n"				\
       "	 .byte 0xff + (664f-663f) - (662b-661b)\n" /* rlen <= slen */	\
       ".previous\n"							\
       ".section .altinstr_replacement, \"ax\"\n"			\
diff --git a/arch/x86/include/asm/cpufeature.h b/arch/x86/include/asm/cpufeature.h
index 4681459..66878c5 100644
--- a/arch/x86/include/asm/cpufeature.h
+++ b/arch/x86/include/asm/cpufeature.h
@@ -300,11 +300,11 @@ static __always_inline __pure bool __static_cpu_has(u8 bit)
 			 _ASM_ALIGN "\n"
 			 _ASM_PTR "1b\n"
 			 _ASM_PTR "0\n" 	/* no replacement */
-			 " .byte %P0\n"		/* feature bit */
+			 " .word %P0\n"		/* feature bit */
 			 " .byte 2b - 1b\n"	/* source len */
 			 " .byte 0\n"		/* replacement len */
-			 " .byte 0xff + 0 - (2b-1b)\n"	/* padding */
 			 ".previous\n"
+			 /* skipping size check since replacement size = 0 */
 			 : : "i" (bit) : : t_no);
 		return true;
 	t_no:
@@ -318,10 +318,12 @@ static __always_inline __pure bool __static_cpu_has(u8 bit)
 			     _ASM_ALIGN "\n"
 			     _ASM_PTR "1b\n"
 			     _ASM_PTR "3f\n"
-			     " .byte %P1\n"		/* feature bit */
+			     " .word %P1\n"		/* feature bit */
 			     " .byte 2b - 1b\n"		/* source len */
 			     " .byte 4f - 3f\n"		/* replacement len */
-			     " .byte 0xff + (4f-3f) - (2b-1b)\n" /* padding */
+			     ".previous\n"
+			     ".section .discard,\"aw\",@progbits\n"
+			     " .byte 0xff + (4f-3f) - (2b-1b)\n" /* size check */
 			     ".previous\n"
 			     ".section .altinstr_replacement,\"ax\"\n"
 			     "3: movb $1,%0\n"
diff --git a/arch/x86/kernel/entry_32.S b/arch/x86/kernel/entry_32.S
index cd49141..7862cf5 100644
--- a/arch/x86/kernel/entry_32.S
+++ b/arch/x86/kernel/entry_32.S
@@ -914,7 +914,7 @@ ENTRY(simd_coprocessor_error)
 	.balign 4
 	.long 661b
 	.long 663f
-	.byte X86_FEATURE_XMM
+	.word X86_FEATURE_XMM
 	.byte 662b-661b
 	.byte 664f-663f
 .previous
diff --git a/arch/x86/lib/clear_page_64.S b/arch/x86/lib/clear_page_64.S
index ebeafcc..aa4326b 100644
--- a/arch/x86/lib/clear_page_64.S
+++ b/arch/x86/lib/clear_page_64.S
@@ -52,7 +52,7 @@ ENDPROC(clear_page)
 	.align 8
 	.quad clear_page
 	.quad 1b
-	.byte X86_FEATURE_REP_GOOD
+	.word X86_FEATURE_REP_GOOD
 	.byte .Lclear_page_end - clear_page
 	.byte 2b - 1b
 	.previous
diff --git a/arch/x86/lib/copy_page_64.S b/arch/x86/lib/copy_page_64.S
index 727a5d4..6fec2d1 100644
--- a/arch/x86/lib/copy_page_64.S
+++ b/arch/x86/lib/copy_page_64.S
@@ -113,7 +113,7 @@ ENDPROC(copy_page)
 	.align 8
 	.quad copy_page
 	.quad 1b
-	.byte X86_FEATURE_REP_GOOD
+	.word X86_FEATURE_REP_GOOD
 	.byte .Lcopy_page_end - copy_page
 	.byte 2b - 1b
 	.previous
diff --git a/arch/x86/lib/copy_user_64.S b/arch/x86/lib/copy_user_64.S
index 71100c9..a460158 100644
--- a/arch/x86/lib/copy_user_64.S
+++ b/arch/x86/lib/copy_user_64.S
@@ -29,7 +29,7 @@
 	.align 8
 	.quad  0b
 	.quad  2b
-	.byte  \feature			/* when feature is set */
+	.word  \feature			/* when feature is set */
 	.byte  5
 	.byte  5
 	.previous
diff --git a/arch/x86/lib/memcpy_64.S b/arch/x86/lib/memcpy_64.S
index f82e884..bcbcd1e 100644
--- a/arch/x86/lib/memcpy_64.S
+++ b/arch/x86/lib/memcpy_64.S
@@ -131,7 +131,7 @@ ENDPROC(__memcpy)
 	.align 8
 	.quad memcpy
 	.quad .Lmemcpy_c
-	.byte X86_FEATURE_REP_GOOD
+	.word X86_FEATURE_REP_GOOD
 
 	/*
 	 * Replace only beginning, memcpy is used to apply alternatives,
diff --git a/arch/x86/lib/memset_64.S b/arch/x86/lib/memset_64.S
index e88d3b8..09d3442 100644
--- a/arch/x86/lib/memset_64.S
+++ b/arch/x86/lib/memset_64.S
@@ -121,7 +121,7 @@ ENDPROC(__memset)
 	.align 8
 	.quad memset
 	.quad .Lmemset_c
-	.byte X86_FEATURE_REP_GOOD
+	.word X86_FEATURE_REP_GOOD
 	.byte .Lfinal - memset
 	.byte .Lmemset_e - .Lmemset_c
 	.previous

Re: [tip:x86/alternatives] x86, alternatives: Use 16-bit numbers for cpufeature index

[Lai Jiangshan]

tip-bot for H. Peter Anvin wrote:
> Commit-ID:  f88731e3068f9d1392ba71cc9f50f035d26a0d4f
> Gitweb:     http://git.kernel.org/tip/f88731e3068f9d1392ba71cc9f50f035d26a0d4f
> Author:     H. Peter Anvin <hpa@linux.intel.com>
> AuthorDate: Wed, 9 Jun 2010 16:03:09 -0700
> Committer:  H. Peter Anvin <hpa@linux.intel.com>
> CommitDate: Wed, 9 Jun 2010 16:03:09 -0700
> 
> x86, alternatives: Use 16-bit numbers for cpufeature index
> 
> We already have cpufeature indicies above 255, so use a 16-bit number
> for the alternatives index.  This consumes a padding field and so
> doesn't add any size, but it means that abusing the padding field to
> create assembly errors on overflow no longer works.  We can retain the
> test simply by redirecting it to the .discard section, however.
> 

My machine hits "invalid opcode" at *prepare_to_copy+0x79,
and it can't boot up.

(gdb) l *prepare_to_copy+0x79
0xc0101789 is in prepare_to_copy (/home/njubee/work/linux-2.6-tip/arch/x86/include/asm/xsave.h:118).
113
114     static inline void fpu_xsave(struct fpu *fpu)
115     {
116             /* This, however, we can work around by forcing the compiler to select
117                an addressing mode that doesn't require extended registers. */
118             __asm__ __volatile__(".byte " REX_PREFIX "0x0f,0xae,0x27"
119                                  : : "D" (&(fpu->state->xsave)),
120                                      "a" (-1), "d"(-1) : "memory");
121     }
122     #endif

It can boot up if this patch is reverted.
Does this patch change the return value of "use_xsave()"

cat /proc/cpuinfo
processor       : 0
vendor_id       : GenuineIntel
cpu family      : 15
model           : 4
model name      : Intel(R) Pentium(R) D CPU 2.80GHz
stepping        : 8
cpu MHz         : 2800.120
cache size      : 1024 KB
fdiv_bug        : no
hlt_bug         : no
f00f_bug        : no
coma_bug        : no
fpu             : yes
fpu_exception   : yes
cpuid level     : 5
wp              : yes
flags           : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss constant_tsc pebs bts tsc_reliable pni ds_cpl
bogomips        : 5600.24
clflush size    : 64
cache_alignment : 128
address sizes   : 36 bits physical, 48 bits virtual
power management:

processor       : 1
vendor_id       : GenuineIntel
cpu family      : 15
model           : 4
model name      : Intel(R) Pentium(R) D CPU 2.80GHz
stepping        : 8
cpu MHz         : 2800.120
cache size      : 1024 KB
fdiv_bug        : no
hlt_bug         : no
f00f_bug        : no
coma_bug        : no
fpu             : yes
fpu_exception   : yes
cpuid level     : 5
wp              : yes
flags           : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss constant_tsc pebs bts tsc_reliable pni ds_cpl
bogomips        : 5574.36
clflush size    : 64
cache_alignment : 128
address sizes   : 36 bits physical, 48 bits virtual
power management:

Re: [tip:x86/alternatives] x86, alternatives: Use 16-bit numbers for cpufeature index

[H. Peter Anvin]

On 06/25/2010 02:20 AM, Lai Jiangshan wrote:
>>
>> x86, alternatives: Use 16-bit numbers for cpufeature index
>>
>> We already have cpufeature indicies above 255, so use a 16-bit number
>> for the alternatives index.  This consumes a padding field and so
>> doesn't add any size, but it means that abusing the padding field to
>> create assembly errors on overflow no longer works.  We can retain the
>> test simply by redirecting it to the .discard section, however.
>>
> 
> My machine hits "invalid opcode" at *prepare_to_copy+0x79,
> and it can't boot up.
> 
> (gdb) l *prepare_to_copy+0x79
> 0xc0101789 is in prepare_to_copy (/home/njubee/work/linux-2.6-tip/arch/x86/include/asm/xsave.h:118).
> 113
> 114     static inline void fpu_xsave(struct fpu *fpu)
> 115     {
> 116             /* This, however, we can work around by forcing the compiler to select
> 117                an addressing mode that doesn't require extended registers. */
> 118             __asm__ __volatile__(".byte " REX_PREFIX "0x0f,0xae,0x27"
> 119                                  : : "D" (&(fpu->state->xsave)),
> 120                                      "a" (-1), "d"(-1) : "memory");
> 121     }
> 122     #endif
> 

There are no alternatives in that code, at all... so it makes me really
wonder what is going on.  One possibility, of course, is that one
alternative has ended up with the wrong address.  Will look...

	-hpa

-- 
H. Peter Anvin, Intel Open Source Technology Center
I work for Intel.  I don't speak on their behalf.

Re: [tip:x86/alternatives] x86, alternatives: Use 16-bit numbers for cpufeature index

[Lai Jiangshan]

H. Peter Anvin wrote:
> On 06/25/2010 02:20 AM, Lai Jiangshan wrote:
>>> x86, alternatives: Use 16-bit numbers for cpufeature index
>>>
>>> We already have cpufeature indicies above 255, so use a 16-bit number
>>> for the alternatives index.  This consumes a padding field and so
>>> doesn't add any size, but it means that abusing the padding field to
>>> create assembly errors on overflow no longer works.  We can retain the
>>> test simply by redirecting it to the .discard section, however.
>>>
>> My machine hits "invalid opcode" at *prepare_to_copy+0x79,
>> and it can't boot up.
>>
>> (gdb) l *prepare_to_copy+0x79
>> 0xc0101789 is in prepare_to_copy (/home/njubee/work/linux-2.6-tip/arch/x86/include/asm/xsave.h:118).
>> 113
>> 114     static inline void fpu_xsave(struct fpu *fpu)
>> 115     {
>> 116             /* This, however, we can work around by forcing the compiler to select
>> 117                an addressing mode that doesn't require extended registers. */
>> 118             __asm__ __volatile__(".byte " REX_PREFIX "0x0f,0xae,0x27"
>> 119                                  : : "D" (&(fpu->state->xsave)),
>> 120                                      "a" (-1), "d"(-1) : "memory");
>> 121     }
>> 122     #endif
>>
> 
> There are no alternatives in that code, at all... so it makes me really
> wonder what is going on.  One possibility, of course, is that one
> alternative has ended up with the wrong address.  Will look...
> 

There is alternative in use_xsave().
use_xsave() should return false in my system, but it returns true after this patch applied.

>> Does this patch change the return value of "use_xsave()"

Re: [tip:x86/alternatives] x86, alternatives: Use 16-bit numbers for cpufeature index

[H. Peter Anvin]

On 06/28/2010 12:58 AM, Lai Jiangshan wrote:
> 
> There is alternative in use_xsave().
> use_xsave() should return false in my system, but it returns true after this patch applied.
> 

OK, so a false substitution... strange.

	-hpa

Re: [tip:x86/alternatives] x86, alternatives: Use 16-bit numbers for cpufeature index

[H. Peter Anvin]

[-- Attachment #1: Type: text/plain, Size: 229 bytes --]

On 06/28/2010 12:58 AM, Lai Jiangshan wrote:
> 
> There is alternative in use_xsave().
> use_xsave() should return false in my system, but it returns true after this patch applied.
> 

Does this patch solve your problem?

	-hpa


[-- Attachment #2: 0001-x86-alternatives-correct-obsolete-use-of-u8-in-stati.patch --]
[-- Type: text/x-patch, Size: 1565 bytes --]

>From be5f348a31cbfa7587903952fa398c8511e23ee9 Mon Sep 17 00:00:00 2001
From: H. Peter Anvin <hpa@linux.intel.com>
Date: Mon, 28 Jun 2010 12:00:18 -0700
Subject: [PATCH] x86, alternatives: correct obsolete use of "u8" in static_cpu_has()

gcc seems to pass unsigned words on as signed to the assembler, at
least with the %P format.  As such, it is critical to get the correct
type.

Furthermore we are no longer limited to features < 256.

Reported-by: Lai Jiangshan <laijs@cn.fujitsu.com>
LKML-Reference: <4C2474EF.4050902@cn.fujitsu.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
---
 arch/x86/include/asm/cpufeature.h |    4 ++--
 1 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/x86/include/asm/cpufeature.h b/arch/x86/include/asm/cpufeature.h
index 66878c5..e8b8896 100644
--- a/arch/x86/include/asm/cpufeature.h
+++ b/arch/x86/include/asm/cpufeature.h
@@ -291,7 +291,7 @@ extern const char * const x86_power_flags[32];
  * patch the target code for additional performance.
  *
  */
-static __always_inline __pure bool __static_cpu_has(u8 bit)
+static __always_inline __pure bool __static_cpu_has(u16 bit)
 {
 #if __GNUC__ > 4 || (__GNUC__ == 4 && __GNUC_MINOR__ >= 5)
 		asm goto("1: jmp %l[t_no]\n"
@@ -339,7 +339,7 @@ static __always_inline __pure bool __static_cpu_has(u8 bit)
 (								\
 	__builtin_constant_p(boot_cpu_has(bit)) ?		\
 		boot_cpu_has(bit) :				\
-	(__builtin_constant_p(bit) && !((bit) & ~0xff)) ?	\
+	__builtin_constant_p(bit) ?				\
 		__static_cpu_has(bit) :				\
 		boot_cpu_has(bit)				\
 )
-- 
1.7.0.1

Re: [tip:x86/alternatives] x86, alternatives: Use 16-bit numbers for cpufeature index

[Lai Jiangshan]

H. Peter Anvin wrote:
> On 06/28/2010 12:58 AM, Lai Jiangshan wrote:
>> There is alternative in use_xsave().
>> use_xsave() should return false in my system, but it returns true after this patch applied.
>>
> 
> Does this patch solve your problem?
> 
> 	-hpa
> 
> 

Yeah, It works, thanks a lot!

Lai

[tip:x86/alternatives] x86, alternatives: correct obsolete use of "u8" in static_cpu_has()

[tip-bot for H. Peter Anvin]

Commit-ID:  a3d2d12f275fcd33d7edc34e6b4112b5a3c9d35d
Gitweb:     http://git.kernel.org/tip/a3d2d12f275fcd33d7edc34e6b4112b5a3c9d35d
Author:     H. Peter Anvin <hpa@linux.intel.com>
AuthorDate: Mon, 28 Jun 2010 12:00:18 -0700
Committer:  H. Peter Anvin <hpa@zytor.com>
CommitDate: Mon, 28 Jun 2010 22:04:47 -0700

x86, alternatives: correct obsolete use of "u8" in static_cpu_has()

gcc seems to pass unsigned words on as signed to the assembler, at
least with the %P format.  As such, it is critical to get the correct
type.

Furthermore we are no longer limited to features < 256.

Reported-and-tested-by: Lai Jiangshan <laijs@cn.fujitsu.com>
LKML-Reference: <4C2474EF.4050902@cn.fujitsu.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
---
 arch/x86/include/asm/cpufeature.h |    4 ++--
 1 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/x86/include/asm/cpufeature.h b/arch/x86/include/asm/cpufeature.h
index 66878c5..e8b8896 100644
--- a/arch/x86/include/asm/cpufeature.h
+++ b/arch/x86/include/asm/cpufeature.h
@@ -291,7 +291,7 @@ extern const char * const x86_power_flags[32];
  * patch the target code for additional performance.
  *
  */
-static __always_inline __pure bool __static_cpu_has(u8 bit)
+static __always_inline __pure bool __static_cpu_has(u16 bit)
 {
 #if __GNUC__ > 4 || (__GNUC__ == 4 && __GNUC_MINOR__ >= 5)
 		asm goto("1: jmp %l[t_no]\n"
@@ -339,7 +339,7 @@ static __always_inline __pure bool __static_cpu_has(u8 bit)
 (								\
 	__builtin_constant_p(boot_cpu_has(bit)) ?		\
 		boot_cpu_has(bit) :				\
-	(__builtin_constant_p(bit) && !((bit) & ~0xff)) ?	\
+	__builtin_constant_p(bit) ?				\
 		__static_cpu_has(bit) :				\
 		boot_cpu_has(bit)				\
 )

[tip:x86/alternatives] x86, alternatives: Use 16-bit numbers for cpufeature index

[tip-bot for tip-bot for H. Peter Anvin]

Commit-ID:  5dc71d49a7c209b77cd257049a2cdb99ed1008c0
Gitweb:     http://git.kernel.org/tip/5dc71d49a7c209b77cd257049a2cdb99ed1008c0
Author:     tip-bot for H. Peter Anvin <hpa@linux.intel.com>
AuthorDate: Thu, 10 Jun 2010 00:10:43 +0000
Committer:  H. Peter Anvin <hpa@zytor.com>
CommitDate: Thu, 10 Jun 2010 23:20:34 -0700

x86, alternatives: Use 16-bit numbers for cpufeature index

We already have cpufeature indicies above 255, so use a 16-bit number
for the alternatives index.  This consumes a padding field and so
doesn't add any size, but it means that abusing the padding field to
create assembly errors on overflow no longer works.  We can retain the
test simply by redirecting it to the .discard section, however.

Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
LKML-Reference: <tip-f88731e3068f9d1392ba71cc9f50f035d26a0d4f@git.kernel.org>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
---
 arch/x86/include/asm/alternative.h |    7 ++++---
 arch/x86/include/asm/cpufeature.h  |   10 ++++++----
 2 files changed, 10 insertions(+), 7 deletions(-)

diff --git a/arch/x86/include/asm/alternative.h b/arch/x86/include/asm/alternative.h
index 03b6bb5..bc6abb7 100644
--- a/arch/x86/include/asm/alternative.h
+++ b/arch/x86/include/asm/alternative.h
@@ -45,10 +45,9 @@
 struct alt_instr {
 	u8 *instr;		/* original instruction */
 	u8 *replacement;
-	u8  cpuid;		/* cpuid bit set for replacement */
+	u16 cpuid;		/* cpuid bit set for replacement */
 	u8  instrlen;		/* length of original instruction */
 	u8  replacementlen;	/* length of new instruction, <= instrlen */
-	u8  pad1;
 #ifdef CONFIG_X86_64
 	u32 pad2;
 #endif
@@ -86,9 +85,11 @@ static inline int alternatives_text_reserved(void *start, void *end)
       _ASM_ALIGN "\n"							\
       _ASM_PTR "661b\n"				/* label           */	\
       _ASM_PTR "663f\n"				/* new instruction */	\
-      "	 .byte " __stringify(feature) "\n"	/* feature bit     */	\
+      "	 .word " __stringify(feature) "\n"	/* feature bit     */	\
       "	 .byte 662b-661b\n"			/* sourcelen       */	\
       "	 .byte 664f-663f\n"			/* replacementlen  */	\
+      ".previous\n"							\
+      ".section .discard,\"aw\",@progbits\n"				\
       "	 .byte 0xff + (664f-663f) - (662b-661b)\n" /* rlen <= slen */	\
       ".previous\n"							\
       ".section .altinstr_replacement, \"ax\"\n"			\
diff --git a/arch/x86/include/asm/cpufeature.h b/arch/x86/include/asm/cpufeature.h
index 4681459..66878c5 100644
--- a/arch/x86/include/asm/cpufeature.h
+++ b/arch/x86/include/asm/cpufeature.h
@@ -300,11 +300,11 @@ static __always_inline __pure bool __static_cpu_has(u8 bit)
 			 _ASM_ALIGN "\n"
 			 _ASM_PTR "1b\n"
 			 _ASM_PTR "0\n" 	/* no replacement */
-			 " .byte %P0\n"		/* feature bit */
+			 " .word %P0\n"		/* feature bit */
 			 " .byte 2b - 1b\n"	/* source len */
 			 " .byte 0\n"		/* replacement len */
-			 " .byte 0xff + 0 - (2b-1b)\n"	/* padding */
 			 ".previous\n"
+			 /* skipping size check since replacement size = 0 */
 			 : : "i" (bit) : : t_no);
 		return true;
 	t_no:
@@ -318,10 +318,12 @@ static __always_inline __pure bool __static_cpu_has(u8 bit)
 			     _ASM_ALIGN "\n"
 			     _ASM_PTR "1b\n"
 			     _ASM_PTR "3f\n"
-			     " .byte %P1\n"		/* feature bit */
+			     " .word %P1\n"		/* feature bit */
 			     " .byte 2b - 1b\n"		/* source len */
 			     " .byte 4f - 3f\n"		/* replacement len */
-			     " .byte 0xff + (4f-3f) - (2b-1b)\n" /* padding */
+			     ".previous\n"
+			     ".section .discard,\"aw\",@progbits\n"
+			     " .byte 0xff + (4f-3f) - (2b-1b)\n" /* size check */
 			     ".previous\n"
 			     ".section .altinstr_replacement,\"ax\"\n"
 			     "3: movb $1,%0\n"

Re: [tip:x86/alternatives] x86, alternatives: Use 16-bit numbers for cpufeature index

[Ingo Molnar]

[-- Attachment #1: Type: text/plain, Size: 2199 bytes --]


* tip-bot for tip-bot for H. Peter Anvin <hpa@linux.intel.com> wrote:

> Commit-ID:  5dc71d49a7c209b77cd257049a2cdb99ed1008c0
> Gitweb:     http://git.kernel.org/tip/5dc71d49a7c209b77cd257049a2cdb99ed1008c0
> Author:     tip-bot for H. Peter Anvin <hpa@linux.intel.com>
> AuthorDate: Thu, 10 Jun 2010 00:10:43 +0000
> Committer:  H. Peter Anvin <hpa@zytor.com>
> CommitDate: Thu, 10 Jun 2010 23:20:34 -0700
> 
> x86, alternatives: Use 16-bit numbers for cpufeature index
> 
> We already have cpufeature indicies above 255, so use a 16-bit number
> for the alternatives index.  This consumes a padding field and so
> doesn't add any size, but it means that abusing the padding field to
> create assembly errors on overflow no longer works.  We can retain the
> test simply by redirecting it to the .discard section, however.
> 
> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
> LKML-Reference: <tip-f88731e3068f9d1392ba71cc9f50f035d26a0d4f@git.kernel.org>
> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
> ---
>  arch/x86/include/asm/alternative.h |    7 ++++---
>  arch/x86/include/asm/cpufeature.h  |   10 ++++++----
>  2 files changed, 10 insertions(+), 7 deletions(-)

Hm, this patch is causing trouble in -tip testing again - it's triggering a 
colorful boot crash:

[    2.220002] calling  inet_init+0x0/0x23d @ 1
[    2.223343] NET: Registered protocol family 2
[    2.226727] IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
[    2.233492] ------------[ cut here ]------------
[    2.236671] WARNING: at mm/vmalloc.c:107 vmap_page_range_noflush+0x309/0x3a0()
[    2.240001] Modules linked in:
...
[    3.090002] Kernel panic - not syncing: Failed to allocate TCP established hash table

So i've zapped them again. We really need to get to the bottom of this. Config 
and bootlog attached.

The crash looks very weird - and it's consistent with possible effects of some 
sort of code patching failure/mismatch.

It goes away if i revert these two:

 a3d2d12: x86, alternatives: correct obsolete use of "u8" in static_cpu_has()
 5dc71d4: x86, alternatives: Use 16-bit numbers for cpufeature index

I reproduced the crash twice before testing the revert.

Thanks,

	Ingo

[-- Attachment #2: config-Tue_Jun_29_12_55_45_CEST_2010.bad --]
[-- Type: text/plain, Size: 71197 bytes --]

# 73175db2
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.35-rc3
# Tue Jun 29 12:55:45 2010
#
CONFIG_64BIT=y
# CONFIG_X86_32 is not set
CONFIG_X86_64=y
CONFIG_X86=y
CONFIG_INSTRUCTION_DECODER=y
CONFIG_OUTPUT_FORMAT="elf64-x86-64"
CONFIG_ARCH_DEFCONFIG="arch/x86/configs/x86_64_defconfig"
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_MMU=y
CONFIG_ZONE_DMA=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_NEED_SG_DMA_LENGTH=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_GPIO=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
# CONFIG_RWSEM_GENERIC_SPINLOCK is not set
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_ARCH_HAS_CPU_RELAX=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
CONFIG_HAVE_CPUMASK_OF_CPU_MAP=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ZONE_DMA32=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_AUDIT_ARCH=y
CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_HAVE_EARLY_RES=y
CONFIG_HAVE_INTEL_TXT=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_USE_GENERIC_SMP_HELPERS=y
CONFIG_X86_64_SMP=y
CONFIG_X86_HT=y
CONFIG_X86_TRAMPOLINE=y
CONFIG_ARCH_HWEIGHT_CFLAGS="-fcall-saved-rdi -fcall-saved-rsi -fcall-saved-rdx -fcall-saved-rcx -fcall-saved-r8 -fcall-saved-r9 -fcall-saved-r10 -fcall-saved-r11"
# CONFIG_KTIME_SCALAR is not set
CONFIG_BOOTPARAM_SUPPORT_NOT_WANTED=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_CONSTRUCTORS=y

#
# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_BROKEN_BOOT_ALLOWED4=y
CONFIG_BROKEN_BOOT_ALLOWED3=y
CONFIG_BROKEN_BOOT_ALLOWED2=y
CONFIG_BROKEN_BOOT_DISALLOWED=y
# CONFIG_BROKEN_BOOT_EUROPE is not set
# CONFIG_BROKEN_BOOT_TITAN is not set
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_CROSS_COMPILE=""
CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_BZIP2=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_HAVE_KERNEL_LZO=y
# CONFIG_KERNEL_GZIP is not set
# CONFIG_KERNEL_BZIP2 is not set
CONFIG_KERNEL_LZMA=y
# CONFIG_KERNEL_LZO is not set
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
CONFIG_TASKSTATS=y
CONFIG_TASK_DELAY_ACCT=y
CONFIG_TASK_XACCT=y
CONFIG_TASK_IO_ACCOUNTING=y
# CONFIG_AUDIT is not set

#
# RCU Subsystem
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
# CONFIG_TINY_RCU is not set
CONFIG_RCU_TRACE=y
CONFIG_RCU_FANOUT=64
CONFIG_RCU_FANOUT_EXACT=y
CONFIG_RCU_FAST_NO_HZ=y
CONFIG_TREE_RCU_TRACE=y
CONFIG_IKCONFIG=m
# CONFIG_IKCONFIG_PROC is not set
CONFIG_LOG_BUF_SHIFT=20
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
CONFIG_CGROUPS=y
CONFIG_CGROUP_DEBUG=y
# CONFIG_CGROUP_NS is not set
CONFIG_CGROUP_FREEZER=y
CONFIG_CGROUP_DEVICE=y
# CONFIG_CPUSETS is not set
CONFIG_CGROUP_CPUACCT=y
# CONFIG_RESOURCE_COUNTERS is not set
CONFIG_CGROUP_SCHED=y
# CONFIG_FAIR_GROUP_SCHED is not set
CONFIG_RT_GROUP_SCHED=y
# CONFIG_BLK_CGROUP is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
CONFIG_RELAY=y
# CONFIG_NAMESPACES is not set
# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
# CONFIG_UID16 is not set
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
# CONFIG_ELF_CORE is not set
CONFIG_PCSPKR_PLATFORM=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
# CONFIG_TIMERFD is not set
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
# CONFIG_AIO is not set
CONFIG_HAVE_PERF_EVENTS=y

#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
# CONFIG_PCI_QUIRKS is not set
# CONFIG_COMPAT_BRK is not set
# CONFIG_SLAB is not set
# CONFIG_SLUB is not set
CONFIG_SLOB=y
# CONFIG_PROFILING is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_KPROBES=y
CONFIG_OPTPROBES=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_KRETPROBES=y
CONFIG_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_OPTPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_ATTRS=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_DMA_API_DEBUG=y
CONFIG_HAVE_HW_BREAKPOINT=y
CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y
CONFIG_HAVE_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_PERF_EVENTS_NMI=y

#
# GCOV-based kernel profiling
#
CONFIG_SLOW_WORK=y
CONFIG_SLOW_WORK_DEBUG=y
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
# CONFIG_MODVERSIONS is not set
CONFIG_MODULE_SRCVERSION_ALL=y
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
# CONFIG_BLK_DEV_BSG is not set
CONFIG_BLK_DEV_INTEGRITY=y
CONFIG_BLOCK_COMPAT=y

#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_DEADLINE=m
CONFIG_IOSCHED_CFQ=y
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
CONFIG_PREEMPT_NOTIFIERS=y
CONFIG_PADATA=y
# CONFIG_INLINE_SPIN_TRYLOCK is not set
# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
# CONFIG_INLINE_SPIN_LOCK is not set
# CONFIG_INLINE_SPIN_LOCK_BH is not set
# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
CONFIG_INLINE_SPIN_UNLOCK=y
# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
# CONFIG_INLINE_READ_TRYLOCK is not set
# CONFIG_INLINE_READ_LOCK is not set
# CONFIG_INLINE_READ_LOCK_BH is not set
# CONFIG_INLINE_READ_LOCK_IRQ is not set
# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
CONFIG_INLINE_READ_UNLOCK=y
# CONFIG_INLINE_READ_UNLOCK_BH is not set
CONFIG_INLINE_READ_UNLOCK_IRQ=y
# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
# CONFIG_INLINE_WRITE_TRYLOCK is not set
# CONFIG_INLINE_WRITE_LOCK is not set
# CONFIG_INLINE_WRITE_LOCK_BH is not set
# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
CONFIG_INLINE_WRITE_UNLOCK=y
# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
CONFIG_MUTEX_SPIN_ON_OWNER=y
CONFIG_FREEZER=y

#
# Processor type and features
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_SMP_SUPPORT=y
CONFIG_SPARSE_IRQ=y
CONFIG_NUMA_IRQ_DESC=y
CONFIG_X86_MPPARSE=y
CONFIG_X86_EXTENDED_PLATFORM=y
CONFIG_X86_VSMP=y
CONFIG_SCHED_OMIT_FRAME_POINTER=y
# CONFIG_PARAVIRT_GUEST is not set
CONFIG_PARAVIRT=y
# CONFIG_NO_BOOTMEM is not set
# CONFIG_MEMTEST is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MGEODE_LX is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_MVIAC7 is not set
# CONFIG_MPSC is not set
# CONFIG_MCORE2 is not set
# CONFIG_MATOM is not set
CONFIG_GENERIC_CPU=y
CONFIG_X86_CPU=y
CONFIG_X86_INTERNODE_CACHE_SHIFT=12
CONFIG_X86_CMPXCHG=y
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_X86_XADD=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_TSC=y
CONFIG_X86_CMPXCHG64=y
CONFIG_X86_CMOV=y
CONFIG_X86_MINIMUM_CPU_FAMILY=64
CONFIG_X86_DEBUGCTLMSR=y
CONFIG_PROCESSOR_SELECT=y
CONFIG_CPU_SUP_INTEL=y
CONFIG_CPU_SUP_AMD=y
CONFIG_CPU_SUP_CENTAUR=y
CONFIG_HPET_TIMER=y
# CONFIG_DMI is not set
# CONFIG_GART_IOMMU is not set
CONFIG_CALGARY_IOMMU=y
CONFIG_CALGARY_IOMMU_ENABLED_BY_DEFAULT=y
CONFIG_AMD_IOMMU=y
CONFIG_AMD_IOMMU_STATS=y
CONFIG_SWIOTLB=y
CONFIG_IOMMU_HELPER=y
CONFIG_IOMMU_API=y
CONFIG_NR_CPUS=8
# CONFIG_SCHED_SMT is not set
# CONFIG_SCHED_MC is not set
# CONFIG_PREEMPT_NONE is not set
CONFIG_PREEMPT_VOLUNTARY=y
# CONFIG_PREEMPT is not set
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=y
# CONFIG_X86_MCE is not set
CONFIG_I8K=m
CONFIG_MICROCODE=y
CONFIG_MICROCODE_INTEL=y
CONFIG_MICROCODE_AMD=y
CONFIG_MICROCODE_OLD_INTERFACE=y
CONFIG_X86_MSR=m
# CONFIG_X86_CPUID is not set
CONFIG_UP_WANTED_1=y
CONFIG_UP_WANTED_2=y
CONFIG_UP_WANTED=y
CONFIG_SMP=y
CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
# CONFIG_DIRECT_GBPAGES is not set
CONFIG_NUMA=y
CONFIG_K8_NUMA=y
# CONFIG_X86_64_ACPI_NUMA is not set
# CONFIG_NUMA_EMU is not set
CONFIG_NODES_SHIFT=6
CONFIG_ARCH_PROC_KCORE_TEXT=y
CONFIG_ARCH_SPARSEMEM_DEFAULT=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000
CONFIG_SELECT_MEMORY_MODEL=y
# CONFIG_FLATMEM_MANUAL is not set
# CONFIG_DISCONTIGMEM_MANUAL is not set
CONFIG_SPARSEMEM_MANUAL=y
CONFIG_SPARSEMEM=y
CONFIG_NEED_MULTIPLE_NODES=y
CONFIG_HAVE_MEMORY_PRESENT=y
CONFIG_SPARSEMEM_EXTREME=y
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
CONFIG_SPARSEMEM_ALLOC_MEM_MAP_TOGETHER=y
# CONFIG_SPARSEMEM_VMEMMAP is not set
# CONFIG_MEMORY_HOTPLUG is not set
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_COMPACTION is not set
CONFIG_MIGRATION=y
CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_MMU_NOTIFIER=y
CONFIG_KSM=y
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_X86_CHECK_BIOS_CORRUPTION=y
CONFIG_X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK=y
# CONFIG_X86_RESERVE_LOW_64K is not set
# CONFIG_MTRR is not set
# CONFIG_EFI is not set
CONFIG_SECCOMP=y
CONFIG_CC_STACKPROTECTOR=y
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
CONFIG_HZ_300=y
# CONFIG_HZ_1000 is not set
CONFIG_HZ=300
CONFIG_SCHED_HRTICK=y
# CONFIG_KEXEC is not set
CONFIG_CRASH_DUMP=y
CONFIG_PHYSICAL_START=0x1000000
CONFIG_RELOCATABLE=y
CONFIG_PHYSICAL_ALIGN=0x1000000
CONFIG_HOTPLUG_CPU=y
CONFIG_COMPAT_VDSO=y
CONFIG_CMDLINE_BOOL=y
CONFIG_CMDLINE=""
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID=y
CONFIG_USE_PERCPU_NUMA_NODE_ID=y

#
# Power management and ACPI options
#
CONFIG_ARCH_HIBERNATION_HEADER=y
CONFIG_PM=y
CONFIG_PM_DEBUG=y
CONFIG_PM_ADVANCED_DEBUG=y
# CONFIG_PM_VERBOSE is not set
CONFIG_CAN_PM_TRACE=y
# CONFIG_PM_TRACE_RTC is not set
CONFIG_PM_SLEEP_SMP=y
CONFIG_PM_SLEEP=y
# CONFIG_PM_SLEEP_ADVANCED_DEBUG is not set
CONFIG_SUSPEND_NVS=y
CONFIG_SUSPEND=y
CONFIG_SUSPEND_FREEZER=y
CONFIG_HIBERNATION=y
CONFIG_PM_STD_PARTITION=""
CONFIG_PM_RUNTIME=y
CONFIG_PM_OPS=y
CONFIG_ACPI=y
CONFIG_ACPI_SLEEP=y
CONFIG_ACPI_PROCFS=y
CONFIG_ACPI_PROCFS_POWER=y
# CONFIG_ACPI_POWER_METER is not set
# CONFIG_ACPI_SYSFS_POWER is not set
CONFIG_ACPI_PROC_EVENT=y
# CONFIG_ACPI_AC is not set
# CONFIG_ACPI_BATTERY is not set
CONFIG_ACPI_BUTTON=m
CONFIG_ACPI_FAN=m
# CONFIG_ACPI_DOCK is not set
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_HOTPLUG_CPU=y
CONFIG_ACPI_PROCESSOR_AGGREGATOR=y
# CONFIG_ACPI_THERMAL is not set
CONFIG_ACPI_NUMA=y
# CONFIG_ACPI_CUSTOM_DSDT is not set
CONFIG_ACPI_BLACKLIST_YEAR=0
CONFIG_ACPI_DEBUG=y
CONFIG_ACPI_DEBUG_FUNC_TRACE=y
CONFIG_ACPI_PCI_SLOT=m
# CONFIG_X86_PM_TIMER is not set
CONFIG_ACPI_CONTAINER=y
CONFIG_ACPI_SBS=y
CONFIG_ACPI_HED=m
CONFIG_ACPI_APEI=y
CONFIG_ACPI_APEI_GHES=m
CONFIG_ACPI_APEI_EINJ=m
CONFIG_SFI=y

#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=y
# CONFIG_CPU_FREQ_DEBUG is not set
CONFIG_CPU_FREQ_STAT=m
# CONFIG_CPU_FREQ_STAT_DETAILS is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
# CONFIG_CPU_FREQ_GOV_PERFORMANCE is not set
CONFIG_CPU_FREQ_GOV_POWERSAVE=y
# CONFIG_CPU_FREQ_GOV_USERSPACE is not set
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set

#
# CPUFreq processor drivers
#
# CONFIG_X86_PCC_CPUFREQ is not set
# CONFIG_X86_ACPI_CPUFREQ is not set
# CONFIG_X86_POWERNOW_K8 is not set
# CONFIG_X86_SPEEDSTEP_CENTRINO is not set
CONFIG_X86_P4_CLOCKMOD=m

#
# shared options
#
CONFIG_X86_SPEEDSTEP_LIB=m
CONFIG_CPU_IDLE=y
CONFIG_CPU_IDLE_GOV_LADDER=y
CONFIG_CPU_IDLE_GOV_MENU=y
CONFIG_INTEL_IDLE=m

#
# Memory power savings
#
CONFIG_I7300_IDLE_IOAT_CHANNEL=y
CONFIG_I7300_IDLE=y

#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
CONFIG_PCI_DIRECT=y
# CONFIG_PCI_MMCONFIG is not set
CONFIG_PCI_DOMAINS=y
# CONFIG_PCI_CNB20LE_QUIRK is not set
CONFIG_DMAR=y
# CONFIG_DMAR_DEFAULT_ON is not set
CONFIG_DMAR_FLOPPY_WA=y
# CONFIG_INTR_REMAP is not set
CONFIG_PCIEPORTBUS=y
# CONFIG_PCIEAER is not set
CONFIG_PCIEASPM=y
# CONFIG_PCIEASPM_DEBUG is not set
CONFIG_PCIE_PME=y
CONFIG_ARCH_SUPPORTS_MSI=y
CONFIG_PCI_MSI=y
CONFIG_PCI_STUB=m
CONFIG_HT_IRQ=y
# CONFIG_PCI_IOV is not set
CONFIG_PCI_IOAPIC=y
CONFIG_ISA_DMA_API=y
CONFIG_K8_NB=y
CONFIG_PCCARD=y
CONFIG_PCMCIA=y
CONFIG_PCMCIA_LOAD_CIS=y
CONFIG_CARDBUS=y

#
# PC-card bridges
#
CONFIG_YENTA=y
# CONFIG_YENTA_O2 is not set
# CONFIG_YENTA_RICOH is not set
CONFIG_YENTA_TI=y
CONFIG_YENTA_ENE_TUNE=y
CONFIG_YENTA_TOSHIBA=y
CONFIG_PD6729=m
CONFIG_I82092=m
CONFIG_PCCARD_NONSTATIC=y
# CONFIG_HOTPLUG_PCI is not set

#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
CONFIG_COMPAT_BINFMT_ELF=y
# CONFIG_HAVE_AOUT is not set
# CONFIG_BINFMT_MISC is not set
CONFIG_IA32_EMULATION=y
CONFIG_IA32_AOUT=m
CONFIG_COMPAT=y
CONFIG_COMPAT_FOR_U64_ALIGNMENT=y
CONFIG_SYSVIPC_COMPAT=y
CONFIG_NET=y
CONFIG_COMPAT_NETLINK_MESSAGES=y

#
# Networking options
#
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_XFRM=y
CONFIG_XFRM_USER=m
CONFIG_XFRM_SUB_POLICY=y
CONFIG_XFRM_MIGRATE=y
CONFIG_XFRM_STATISTICS=y
CONFIG_NET_KEY=y
# CONFIG_NET_KEY_MIGRATE is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_ASK_IP_FIB_HASH=y
# CONFIG_IP_FIB_TRIE is not set
CONFIG_IP_FIB_HASH=y
# CONFIG_IP_MULTIPLE_TABLES is not set
CONFIG_IP_ROUTE_MULTIPATH=y
CONFIG_IP_ROUTE_VERBOSE=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
# CONFIG_IP_PNP_RARP is not set
# CONFIG_NET_IPIP is not set
CONFIG_NET_IPGRE=y
CONFIG_NET_IPGRE_BROADCAST=y
CONFIG_IP_MROUTE=y
CONFIG_IP_MROUTE_MULTIPLE_TABLES=y
CONFIG_IP_PIMSM_V1=y
CONFIG_IP_PIMSM_V2=y
CONFIG_ARPD=y
# CONFIG_SYN_COOKIES is not set
# CONFIG_INET_AH is not set
CONFIG_INET_ESP=m
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
CONFIG_INET_XFRM_MODE_TRANSPORT=y
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
CONFIG_INET_XFRM_MODE_BEET=y
CONFIG_INET_LRO=y
# CONFIG_INET_DIAG is not set
CONFIG_TCP_CONG_ADVANCED=y
# CONFIG_TCP_CONG_BIC is not set
# CONFIG_TCP_CONG_CUBIC is not set
# CONFIG_TCP_CONG_WESTWOOD is not set
CONFIG_TCP_CONG_HTCP=y
CONFIG_TCP_CONG_HSTCP=m
CONFIG_TCP_CONG_HYBLA=m
CONFIG_TCP_CONG_VEGAS=y
CONFIG_TCP_CONG_SCALABLE=m
CONFIG_TCP_CONG_LP=y
# CONFIG_TCP_CONG_VENO is not set
CONFIG_TCP_CONG_YEAH=m
# CONFIG_TCP_CONG_ILLINOIS is not set
# CONFIG_DEFAULT_BIC is not set
# CONFIG_DEFAULT_CUBIC is not set
CONFIG_DEFAULT_HTCP=y
# CONFIG_DEFAULT_HYBLA is not set
# CONFIG_DEFAULT_VEGAS is not set
# CONFIG_DEFAULT_VENO is not set
# CONFIG_DEFAULT_WESTWOOD is not set
# CONFIG_DEFAULT_RENO is not set
CONFIG_DEFAULT_TCP_CONG="htcp"
CONFIG_TCP_MD5SIG=y
# CONFIG_IPV6 is not set
CONFIG_NETLABEL=y
CONFIG_NETWORK_SECMARK=y
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
CONFIG_NETFILTER_ADVANCED=y

#
# Core Netfilter Configuration
#
CONFIG_NETFILTER_NETLINK=m
# CONFIG_NETFILTER_NETLINK_QUEUE is not set
CONFIG_NETFILTER_NETLINK_LOG=m
CONFIG_NF_CONNTRACK=m
# CONFIG_NF_CT_ACCT is not set
CONFIG_NF_CONNTRACK_MARK=y
CONFIG_NF_CONNTRACK_SECMARK=y
CONFIG_NF_CONNTRACK_EVENTS=y
# CONFIG_NF_CT_PROTO_DCCP is not set
# CONFIG_NF_CT_PROTO_SCTP is not set
# CONFIG_NF_CT_PROTO_UDPLITE is not set
CONFIG_NF_CONNTRACK_AMANDA=m
# CONFIG_NF_CONNTRACK_FTP is not set
# CONFIG_NF_CONNTRACK_H323 is not set
CONFIG_NF_CONNTRACK_IRC=m
# CONFIG_NF_CONNTRACK_NETBIOS_NS is not set
# CONFIG_NF_CONNTRACK_PPTP is not set
CONFIG_NF_CONNTRACK_SANE=m
# CONFIG_NF_CONNTRACK_SIP is not set
# CONFIG_NF_CONNTRACK_TFTP is not set
# CONFIG_NF_CT_NETLINK is not set
CONFIG_NETFILTER_XTABLES=m

#
# Xtables combined modules
#
CONFIG_NETFILTER_XT_MARK=m
CONFIG_NETFILTER_XT_CONNMARK=m

#
# Xtables targets
#
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m
# CONFIG_NETFILTER_XT_TARGET_LED is not set
CONFIG_NETFILTER_XT_TARGET_MARK=m
# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
CONFIG_NETFILTER_XT_TARGET_RATEEST=m
# CONFIG_NETFILTER_XT_TARGET_TEE is not set
CONFIG_NETFILTER_XT_TARGET_SECMARK=m
CONFIG_NETFILTER_XT_TARGET_TCPMSS=m

#
# Xtables matches
#
CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
# CONFIG_NETFILTER_XT_MATCH_CONNBYTES is not set
CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
# CONFIG_NETFILTER_XT_MATCH_CONNTRACK is not set
# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
CONFIG_NETFILTER_XT_MATCH_DSCP=m
# CONFIG_NETFILTER_XT_MATCH_ESP is not set
CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
CONFIG_NETFILTER_XT_MATCH_HELPER=m
# CONFIG_NETFILTER_XT_MATCH_HL is not set
CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
CONFIG_NETFILTER_XT_MATCH_MAC=m
CONFIG_NETFILTER_XT_MATCH_MARK=m
# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set
CONFIG_NETFILTER_XT_MATCH_OSF=m
CONFIG_NETFILTER_XT_MATCH_OWNER=m
CONFIG_NETFILTER_XT_MATCH_POLICY=m
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
CONFIG_NETFILTER_XT_MATCH_QUOTA=m
CONFIG_NETFILTER_XT_MATCH_RATEEST=m
CONFIG_NETFILTER_XT_MATCH_REALM=m
CONFIG_NETFILTER_XT_MATCH_RECENT=m
CONFIG_NETFILTER_XT_MATCH_SCTP=m
CONFIG_NETFILTER_XT_MATCH_STATE=m
CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
# CONFIG_NETFILTER_XT_MATCH_STRING is not set
# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set
CONFIG_NETFILTER_XT_MATCH_TIME=m
CONFIG_NETFILTER_XT_MATCH_U32=m
# CONFIG_IP_VS is not set

#
# IP: Netfilter Configuration
#
CONFIG_NF_DEFRAG_IPV4=m
CONFIG_NF_CONNTRACK_IPV4=m
CONFIG_NF_CONNTRACK_PROC_COMPAT=y
# CONFIG_IP_NF_QUEUE is not set
# CONFIG_IP_NF_IPTABLES is not set
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m

#
# DECnet: Netfilter Configuration
#
CONFIG_DECNET_NF_GRABULATOR=m
CONFIG_IP_DCCP=y

#
# DCCP CCIDs Configuration (EXPERIMENTAL)
#
CONFIG_IP_DCCP_CCID2_DEBUG=y
CONFIG_IP_DCCP_CCID3=y
CONFIG_IP_DCCP_CCID3_DEBUG=y
CONFIG_IP_DCCP_CCID3_RTO=100
CONFIG_IP_DCCP_TFRC_LIB=y
CONFIG_IP_DCCP_TFRC_DEBUG=y
CONFIG_IP_SCTP=y
# CONFIG_NET_SCTPPROBE is not set
CONFIG_SCTP_DBG_MSG=y
# CONFIG_SCTP_DBG_OBJCNT is not set
# CONFIG_SCTP_HMAC_NONE is not set
CONFIG_SCTP_HMAC_SHA1=y
# CONFIG_SCTP_HMAC_MD5 is not set
CONFIG_RDS=y
# CONFIG_RDS_RDMA is not set
CONFIG_RDS_TCP=y
CONFIG_RDS_DEBUG=y
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
CONFIG_L2TP=y
CONFIG_L2TP_DEBUGFS=y
# CONFIG_L2TP_V3 is not set
CONFIG_STP=y
CONFIG_GARP=y
# CONFIG_BRIDGE is not set
CONFIG_NET_DSA=y
CONFIG_NET_DSA_TAG_DSA=y
CONFIG_NET_DSA_TAG_EDSA=y
CONFIG_NET_DSA_TAG_TRAILER=y
CONFIG_NET_DSA_MV88E6XXX=y
CONFIG_NET_DSA_MV88E6060=y
CONFIG_NET_DSA_MV88E6XXX_NEED_PPU=y
CONFIG_NET_DSA_MV88E6131=y
CONFIG_NET_DSA_MV88E6123_61_65=y
CONFIG_VLAN_8021Q=y
CONFIG_VLAN_8021Q_GVRP=y
CONFIG_DECNET=m
# CONFIG_DECNET_ROUTER is not set
CONFIG_LLC=y
CONFIG_LLC2=m
CONFIG_IPX=y
CONFIG_IPX_INTERN=y
CONFIG_ATALK=m
# CONFIG_DEV_APPLETALK is not set
CONFIG_X25=m
# CONFIG_LAPB is not set
CONFIG_ECONET=y
CONFIG_ECONET_AUNUDP=y
CONFIG_ECONET_NATIVE=y
CONFIG_WAN_ROUTER=y
CONFIG_PHONET=y
CONFIG_IEEE802154=m
CONFIG_NET_SCHED=y

#
# Queueing/Scheduling
#
CONFIG_NET_SCH_CBQ=m
CONFIG_NET_SCH_HTB=m
CONFIG_NET_SCH_HFSC=y
CONFIG_NET_SCH_PRIO=m
CONFIG_NET_SCH_MULTIQ=m
# CONFIG_NET_SCH_RED is not set
# CONFIG_NET_SCH_SFQ is not set
CONFIG_NET_SCH_TEQL=m
CONFIG_NET_SCH_TBF=m
CONFIG_NET_SCH_GRED=y
CONFIG_NET_SCH_DSMARK=m
CONFIG_NET_SCH_NETEM=y
CONFIG_NET_SCH_DRR=y

#
# Classification
#
CONFIG_NET_CLS=y
CONFIG_NET_CLS_BASIC=y
CONFIG_NET_CLS_TCINDEX=m
CONFIG_NET_CLS_ROUTE4=y
CONFIG_NET_CLS_ROUTE=y
# CONFIG_NET_CLS_FW is not set
CONFIG_NET_CLS_U32=y
CONFIG_CLS_U32_PERF=y
CONFIG_CLS_U32_MARK=y
CONFIG_NET_CLS_RSVP=m
CONFIG_NET_CLS_RSVP6=m
# CONFIG_NET_CLS_FLOW is not set
CONFIG_NET_CLS_CGROUP=y
# CONFIG_NET_EMATCH is not set
# CONFIG_NET_CLS_ACT is not set
CONFIG_NET_CLS_IND=y
CONFIG_NET_SCH_FIFO=y
# CONFIG_DCB is not set
CONFIG_RPS=y

#
# Network testing
#
CONFIG_NET_PKTGEN=y
# CONFIG_NET_TCPPROBE is not set
CONFIG_HAMRADIO=y

#
# Packet Radio protocols
#
CONFIG_AX25=m
CONFIG_AX25_DAMA_SLAVE=y
# CONFIG_NETROM is not set
CONFIG_ROSE=m

#
# AX.25 network device drivers
#
# CONFIG_MKISS is not set
CONFIG_6PACK=m
CONFIG_BPQETHER=m
CONFIG_BAYCOM_SER_FDX=m
CONFIG_BAYCOM_SER_HDX=m
# CONFIG_YAM is not set
CONFIG_CAN=y
CONFIG_CAN_RAW=y
CONFIG_CAN_BCM=m

#
# CAN Device Drivers
#
# CONFIG_CAN_VCAN is not set
# CONFIG_CAN_DEV is not set
CONFIG_CAN_DEBUG_DEVICES=y
CONFIG_IRDA=m

#
# IrDA protocols
#
CONFIG_IRLAN=m
# CONFIG_IRNET is not set
CONFIG_IRCOMM=m
# CONFIG_IRDA_ULTRA is not set

#
# IrDA options
#
CONFIG_IRDA_CACHE_LAST_LSAP=y
CONFIG_IRDA_FAST_RR=y
CONFIG_IRDA_DEBUG=y

#
# Infrared-port device drivers
#

#
# SIR device drivers
#
# CONFIG_IRTTY_SIR is not set

#
# Dongle support
#
# CONFIG_KINGSUN_DONGLE is not set
CONFIG_KSDAZZLE_DONGLE=m
CONFIG_KS959_DONGLE=m

#
# FIR device drivers
#
# CONFIG_USB_IRDA is not set
CONFIG_SIGMATEL_FIR=m
# CONFIG_NSC_FIR is not set
# CONFIG_WINBOND_FIR is not set
# CONFIG_SMC_IRCC_FIR is not set
CONFIG_ALI_FIR=m
CONFIG_VLSI_FIR=m
CONFIG_VIA_FIR=m
CONFIG_MCS_FIR=m
CONFIG_BT=m
CONFIG_BT_L2CAP=m
CONFIG_BT_L2CAP_EXT_FEATURES=y
# CONFIG_BT_SCO is not set
CONFIG_BT_RFCOMM=m
CONFIG_BT_RFCOMM_TTY=y
CONFIG_BT_BNEP=m
CONFIG_BT_BNEP_MC_FILTER=y
# CONFIG_BT_BNEP_PROTO_FILTER is not set
# CONFIG_BT_HIDP is not set

#
# Bluetooth device drivers
#
# CONFIG_BT_HCIBTUSB is not set
CONFIG_BT_HCIUART=m
# CONFIG_BT_HCIUART_H4 is not set
# CONFIG_BT_HCIUART_BCSP is not set
CONFIG_BT_HCIUART_LL=y
# CONFIG_BT_HCIBCM203X is not set
# CONFIG_BT_HCIBPA10X is not set
# CONFIG_BT_HCIBFUSB is not set
# CONFIG_BT_HCIDTL1 is not set
CONFIG_BT_HCIBT3C=m
# CONFIG_BT_HCIBLUECARD is not set
# CONFIG_BT_HCIBTUART is not set
CONFIG_BT_HCIVHCI=m
CONFIG_BT_MRVL=m
CONFIG_AF_RXRPC=y
# CONFIG_AF_RXRPC_DEBUG is not set
CONFIG_RXKAD=y
CONFIG_FIB_RULES=y
CONFIG_WIRELESS=y
CONFIG_WIRELESS_EXT=y
CONFIG_WEXT_CORE=y
CONFIG_WEXT_PROC=y
CONFIG_WEXT_SPY=y
CONFIG_WEXT_PRIV=y
# CONFIG_CFG80211 is not set
# CONFIG_WIRELESS_EXT_SYSFS is not set
CONFIG_LIB80211=y
CONFIG_LIB80211_CRYPT_WEP=y
CONFIG_LIB80211_CRYPT_CCMP=y
CONFIG_LIB80211_CRYPT_TKIP=y
CONFIG_LIB80211_DEBUG=y

#
# CFG80211 needs to be enabled for MAC80211
#

#
# Some wireless drivers require a rate control algorithm
#
# CONFIG_WIMAX is not set
CONFIG_RFKILL=m
CONFIG_RFKILL_LEDS=y
CONFIG_RFKILL_INPUT=y
# CONFIG_CAIF is not set

#
# Device Drivers
#

#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH=""
CONFIG_DEVTMPFS=y
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
CONFIG_FIRMWARE_IN_KERNEL=y
CONFIG_EXTRA_FIRMWARE=""
# CONFIG_SYS_HYPERVISOR is not set
CONFIG_CONNECTOR=m
# CONFIG_PARPORT is not set
CONFIG_PNP=y
# CONFIG_PNP_DEBUG_MESSAGES is not set

#
# Protocols
#
CONFIG_PNPACPI=y
CONFIG_BLK_DEV=y
CONFIG_BLK_DEV_FD=m
CONFIG_BLK_CPQ_DA=y
CONFIG_BLK_CPQ_CISS_DA=m
CONFIG_CISS_SCSI_TAPE=y
CONFIG_BLK_DEV_DAC960=y
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_CRYPTOLOOP=y
CONFIG_BLK_DEV_DRBD=m
CONFIG_DRBD_FAULT_INJECTION=y
CONFIG_BLK_DEV_NBD=m
CONFIG_BLK_DEV_SX8=y
# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
CONFIG_BLK_DEV_XIP=y
CONFIG_CDROM_PKTCDVD=y
CONFIG_CDROM_PKTCDVD_BUFFERS=8
CONFIG_CDROM_PKTCDVD_WCACHE=y
CONFIG_ATA_OVER_ETH=y
# CONFIG_VIRTIO_BLK is not set
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
CONFIG_AD525X_DPOT=m
# CONFIG_AD525X_DPOT_I2C is not set
CONFIG_IBM_ASM=m
CONFIG_PHANTOM=y
CONFIG_SGI_IOC4=m
# CONFIG_TIFM_CORE is not set
CONFIG_ICS932S401=y
CONFIG_ENCLOSURE_SERVICES=y
CONFIG_CS5535_MFGPT=m
CONFIG_CS5535_MFGPT_DEFAULT_IRQ=7
CONFIG_CS5535_CLOCK_EVENT_SRC=m
# CONFIG_HP_ILO is not set
# CONFIG_ISL29003 is not set
CONFIG_SENSORS_TSL2550=y
CONFIG_DS1682=y
CONFIG_VMWARE_BALLOON=m
CONFIG_C2PORT=m
CONFIG_C2PORT_DURAMAR_2150=m

#
# EEPROM support
#
CONFIG_EEPROM_AT24=y
# CONFIG_EEPROM_LEGACY is not set
CONFIG_EEPROM_MAX6875=y
# CONFIG_EEPROM_93CX6 is not set
CONFIG_CB710_CORE=m
# CONFIG_CB710_DEBUG is not set
CONFIG_CB710_DEBUG_ASSUMPTIONS=y
CONFIG_HAVE_IDE=y

#
# SCSI device support
#
CONFIG_SCSI_MOD=y
CONFIG_RAID_ATTRS=m
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
CONFIG_SCSI_TGT=y
CONFIG_SCSI_NETLINK=y
CONFIG_SCSI_PROC_FS=y

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_ST=m
CONFIG_CHR_DEV_OSST=m
CONFIG_BLK_DEV_SR=m
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=m
CONFIG_CHR_DEV_SCH=y
CONFIG_SCSI_ENCLOSURE=y
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
CONFIG_SCSI_SCAN_ASYNC=y
CONFIG_SCSI_WAIT_SCAN=m

#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=y
CONFIG_SCSI_FC_ATTRS=y
CONFIG_SCSI_FC_TGT_ATTRS=y
CONFIG_SCSI_ISCSI_ATTRS=y
CONFIG_SCSI_SAS_ATTRS=y
CONFIG_SCSI_SAS_LIBSAS=y
# CONFIG_SCSI_SAS_ATA is not set
# CONFIG_SCSI_SAS_HOST_SMP is not set
CONFIG_SCSI_SAS_LIBSAS_DEBUG=y
CONFIG_SCSI_LOWLEVEL=y
CONFIG_ISCSI_TCP=y
CONFIG_SCSI_CXGB3_ISCSI=y
CONFIG_SCSI_BNX2_ISCSI=m
CONFIG_BE2ISCSI=y
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
CONFIG_SCSI_HPSA=y
CONFIG_SCSI_3W_9XXX=y
# CONFIG_SCSI_3W_SAS is not set
CONFIG_SCSI_ACARD=y
CONFIG_SCSI_AACRAID=m
CONFIG_SCSI_AIC7XXX=y
CONFIG_AIC7XXX_CMDS_PER_DEVICE=32
CONFIG_AIC7XXX_RESET_DELAY_MS=5000
CONFIG_AIC7XXX_DEBUG_ENABLE=y
CONFIG_AIC7XXX_DEBUG_MASK=0
# CONFIG_AIC7XXX_REG_PRETTY_PRINT is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
CONFIG_SCSI_AIC79XX=m
CONFIG_AIC79XX_CMDS_PER_DEVICE=32
CONFIG_AIC79XX_RESET_DELAY_MS=5000
# CONFIG_AIC79XX_DEBUG_ENABLE is not set
CONFIG_AIC79XX_DEBUG_MASK=0
CONFIG_AIC79XX_REG_PRETTY_PRINT=y
CONFIG_SCSI_AIC94XX=y
# CONFIG_AIC94XX_DEBUG is not set
# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_DPT_I2O is not set
CONFIG_SCSI_ADVANSYS=y
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_MEGARAID_NEWGEN is not set
CONFIG_MEGARAID_LEGACY=m
CONFIG_MEGARAID_SAS=m
# CONFIG_SCSI_MPT2SAS is not set
CONFIG_SCSI_HPTIOP=m
CONFIG_SCSI_BUSLOGIC=y
CONFIG_VMWARE_PVSCSI=y
CONFIG_LIBFC=y
CONFIG_LIBFCOE=y
# CONFIG_FCOE is not set
# CONFIG_FCOE_FNIC is not set
CONFIG_SCSI_DMX3191D=m
CONFIG_SCSI_EATA=y
# CONFIG_SCSI_EATA_TAGGED_QUEUE is not set
CONFIG_SCSI_EATA_LINKED_COMMANDS=y
CONFIG_SCSI_EATA_MAX_TAGS=16
CONFIG_SCSI_FUTURE_DOMAIN=m
CONFIG_SCSI_GDTH=m
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
CONFIG_SCSI_INIA100=y
CONFIG_SCSI_STEX=y
# CONFIG_SCSI_SYM53C8XX_2 is not set
CONFIG_SCSI_IPR=m
# CONFIG_SCSI_IPR_TRACE is not set
CONFIG_SCSI_IPR_DUMP=y
CONFIG_SCSI_QLOGIC_1280=m
CONFIG_SCSI_QLA_FC=m
CONFIG_SCSI_QLA_ISCSI=y
CONFIG_SCSI_LPFC=y
# CONFIG_SCSI_LPFC_DEBUG_FS is not set
CONFIG_SCSI_DC395x=y
CONFIG_SCSI_DC390T=m
CONFIG_SCSI_PMCRAID=m
# CONFIG_SCSI_PM8001 is not set
CONFIG_SCSI_SRP=y
# CONFIG_SCSI_BFA_FC is not set
CONFIG_SCSI_LOWLEVEL_PCMCIA=y
CONFIG_PCMCIA_FDOMAIN=m
# CONFIG_PCMCIA_QLOGIC is not set
CONFIG_PCMCIA_SYM53C500=m
CONFIG_SCSI_DH=m
CONFIG_SCSI_DH_RDAC=m
CONFIG_SCSI_DH_HP_SW=m
# CONFIG_SCSI_DH_EMC is not set
CONFIG_SCSI_DH_ALUA=m
CONFIG_SCSI_OSD_INITIATOR=m
# CONFIG_SCSI_OSD_ULD is not set
CONFIG_SCSI_OSD_DPRINT_SENSE=1
CONFIG_SCSI_OSD_DEBUG=y
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
# CONFIG_ATA_VERBOSE_ERROR is not set
# CONFIG_ATA_ACPI is not set
# CONFIG_SATA_PMP is not set

#
# Controllers with non-SFF native interface
#
CONFIG_SATA_AHCI=y
CONFIG_SATA_AHCI_PLATFORM=m
CONFIG_SATA_INIC162X=y
# CONFIG_SATA_SIL24 is not set
CONFIG_ATA_SFF=y

#
# SFF controllers with custom DMA interface
#
CONFIG_PDC_ADMA=y
CONFIG_SATA_QSTOR=m
# CONFIG_SATA_SX4 is not set
CONFIG_ATA_BMDMA=y

#
# SATA SFF controllers with BMDMA
#
CONFIG_ATA_PIIX=y
CONFIG_SATA_MV=m
CONFIG_SATA_NV=y
CONFIG_SATA_PROMISE=y
# CONFIG_SATA_SIL is not set
# CONFIG_SATA_SIS is not set
CONFIG_SATA_SVW=y
CONFIG_SATA_ULI=m
CONFIG_SATA_VIA=y
CONFIG_SATA_VITESSE=m

#
# PATA SFF controllers with BMDMA
#
CONFIG_PATA_ALI=y
CONFIG_PATA_AMD=y
CONFIG_PATA_ARTOP=y
CONFIG_PATA_ATIIXP=y
CONFIG_PATA_ATP867X=y
CONFIG_PATA_CMD64X=y
CONFIG_PATA_CS5520=m
CONFIG_PATA_CS5530=m
CONFIG_PATA_CYPRESS=m
CONFIG_PATA_EFAR=m
# CONFIG_PATA_HPT366 is not set
CONFIG_PATA_HPT37X=m
CONFIG_PATA_HPT3X2N=y
# CONFIG_PATA_HPT3X3 is not set
CONFIG_PATA_IT8213=y
# CONFIG_PATA_IT821X is not set
CONFIG_PATA_JMICRON=m
CONFIG_PATA_MARVELL=m
CONFIG_PATA_NETCELL=y
# CONFIG_PATA_NINJA32 is not set
# CONFIG_PATA_NS87415 is not set
CONFIG_PATA_OLDPIIX=y
CONFIG_PATA_OPTIDMA=y
CONFIG_PATA_PDC2027X=m
CONFIG_PATA_PDC_OLD=y
CONFIG_PATA_RADISYS=y
# CONFIG_PATA_RDC is not set
CONFIG_PATA_SC1200=y
CONFIG_PATA_SCH=y
# CONFIG_PATA_SERVERWORKS is not set
CONFIG_PATA_SIL680=m
# CONFIG_PATA_SIS is not set
CONFIG_PATA_TOSHIBA=y
# CONFIG_PATA_TRIFLEX is not set
CONFIG_PATA_VIA=y
CONFIG_PATA_WINBOND=y

#
# PIO-only SFF controllers
#
CONFIG_PATA_CMD640_PCI=m
CONFIG_PATA_MPIIX=y
# CONFIG_PATA_NS87410 is not set
CONFIG_PATA_OPTI=m
CONFIG_PATA_PCMCIA=y
CONFIG_PATA_PLATFORM=y
CONFIG_PATA_RZ1000=m

#
# Generic fallback / legacy drivers
#
CONFIG_ATA_GENERIC=y
# CONFIG_PATA_LEGACY is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=m
CONFIG_MD_LINEAR=m
CONFIG_MD_RAID0=m
CONFIG_MD_RAID1=m
CONFIG_MD_RAID10=m
CONFIG_MD_RAID456=m
# CONFIG_MULTICORE_RAID456 is not set
CONFIG_MD_RAID6_PQ=m
CONFIG_ASYNC_RAID6_TEST=m
CONFIG_MD_MULTIPATH=m
# CONFIG_MD_FAULTY is not set
CONFIG_BLK_DEV_DM=m
CONFIG_DM_DEBUG=y
# CONFIG_DM_CRYPT is not set
# CONFIG_DM_SNAPSHOT is not set
# CONFIG_DM_MIRROR is not set
CONFIG_DM_ZERO=m
CONFIG_DM_MULTIPATH=m
CONFIG_DM_MULTIPATH_QL=m
CONFIG_DM_MULTIPATH_ST=m
CONFIG_DM_DELAY=m
CONFIG_DM_UEVENT=y
CONFIG_FUSION=y
CONFIG_FUSION_SPI=y
CONFIG_FUSION_FC=y
# CONFIG_FUSION_SAS is not set
CONFIG_FUSION_MAX_SGE=128
# CONFIG_FUSION_CTL is not set
CONFIG_FUSION_LAN=m
CONFIG_FUSION_LOGGING=y

#
# IEEE 1394 (FireWire) support
#

#
# You can enable one or both FireWire driver stacks.
#

#
# The newer stack is recommended.
#
CONFIG_FIREWIRE=y
CONFIG_FIREWIRE_OHCI=y
CONFIG_FIREWIRE_OHCI_DEBUG=y
CONFIG_FIREWIRE_SBP2=m
# CONFIG_FIREWIRE_NET is not set
CONFIG_IEEE1394=y
# CONFIG_IEEE1394_OHCI1394 is not set
CONFIG_IEEE1394_PCILYNX=y
# CONFIG_IEEE1394_SBP2 is not set
# CONFIG_IEEE1394_ETH1394_ROM_ENTRY is not set
# CONFIG_IEEE1394_ETH1394 is not set
# CONFIG_IEEE1394_RAWIO is not set
CONFIG_IEEE1394_VERBOSEDEBUG=y
CONFIG_I2O=m
# CONFIG_I2O_LCT_NOTIFY_ON_CHANGES is not set
# CONFIG_I2O_EXT_ADAPTEC is not set
CONFIG_I2O_CONFIG=m
CONFIG_I2O_CONFIG_OLD_IOCTL=y
CONFIG_I2O_BUS=m
CONFIG_I2O_BLOCK=m
CONFIG_I2O_SCSI=m
# CONFIG_I2O_PROC is not set
CONFIG_MACINTOSH_DRIVERS=y
CONFIG_MAC_EMUMOUSEBTN=m
CONFIG_NETDEVICES=y
# CONFIG_DUMMY is not set
CONFIG_BONDING=m
CONFIG_MACVLAN=m
CONFIG_MACVTAP=m
CONFIG_EQUALIZER=y
# CONFIG_TUN is not set
# CONFIG_VETH is not set
# CONFIG_NET_SB1000 is not set
CONFIG_ARCNET=m
CONFIG_ARCNET_1201=m
CONFIG_ARCNET_1051=m
# CONFIG_ARCNET_RAW is not set
CONFIG_ARCNET_CAP=m
# CONFIG_ARCNET_COM90xx is not set
CONFIG_ARCNET_COM90xxIO=m
CONFIG_ARCNET_RIM_I=m
# CONFIG_ARCNET_COM20020 is not set
CONFIG_PHYLIB=y

#
# MII PHY device drivers
#
CONFIG_MARVELL_PHY=y
CONFIG_DAVICOM_PHY=m
CONFIG_QSEMI_PHY=m
CONFIG_LXT_PHY=m
CONFIG_CICADA_PHY=y
CONFIG_VITESSE_PHY=y
CONFIG_SMSC_PHY=y
CONFIG_BROADCOM_PHY=m
# CONFIG_ICPLUS_PHY is not set
# CONFIG_REALTEK_PHY is not set
# CONFIG_NATIONAL_PHY is not set
CONFIG_STE10XP=m
CONFIG_LSI_ET1011C_PHY=m
CONFIG_MICREL_PHY=m
CONFIG_FIXED_PHY=y
CONFIG_MDIO_BITBANG=m
# CONFIG_MDIO_GPIO is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
CONFIG_HAPPYMEAL=m
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
CONFIG_NET_VENDOR_3COM=y
CONFIG_VORTEX=y
CONFIG_TYPHOON=y
CONFIG_ETHOC=m
CONFIG_DNET=m
CONFIG_NET_TULIP=y
# CONFIG_DE2104X is not set
CONFIG_TULIP=y
CONFIG_TULIP_MWI=y
CONFIG_TULIP_MMIO=y
CONFIG_TULIP_NAPI=y
# CONFIG_TULIP_NAPI_HW_MITIGATION is not set
CONFIG_DE4X5=m
CONFIG_WINBOND_840=m
CONFIG_DM9102=m
CONFIG_ULI526X=m
CONFIG_PCMCIA_XIRCOM=m
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
CONFIG_AMD8111_ETH=m
CONFIG_ADAPTEC_STARFIRE=y
# CONFIG_KSZ884X_PCI is not set
CONFIG_B44=m
CONFIG_B44_PCI_AUTOSELECT=y
CONFIG_B44_PCICORE_AUTOSELECT=y
CONFIG_B44_PCI=y
CONFIG_FORCEDETH=y
CONFIG_E100=y
# CONFIG_FEALNX is not set
CONFIG_NATSEMI=y
CONFIG_NE2K_PCI=m
# CONFIG_8139CP is not set
CONFIG_8139TOO=y
# CONFIG_8139TOO_PIO is not set
CONFIG_8139TOO_TUNE_TWISTER=y
CONFIG_8139TOO_8129=y
# CONFIG_8139_OLD_RX_RESET is not set
# CONFIG_R6040 is not set
CONFIG_SIS900=m
# CONFIG_EPIC100 is not set
# CONFIG_SMSC9420 is not set
# CONFIG_SUNDANCE is not set
CONFIG_TLAN=y
CONFIG_KS8842=y
CONFIG_KS8851_MLL=m
CONFIG_VIA_RHINE=y
CONFIG_VIA_RHINE_MMIO=y
# CONFIG_SC92031 is not set
CONFIG_ATL2=m
CONFIG_NETDEV_1000=y
CONFIG_ACENIC=y
CONFIG_ACENIC_OMIT_TIGON_I=y
CONFIG_DL2K=m
# CONFIG_E1000 is not set
CONFIG_E1000E=y
# CONFIG_IP1000 is not set
CONFIG_IGB=m
CONFIG_IGBVF=m
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
CONFIG_YELLOWFIN=m
# CONFIG_R8169 is not set
CONFIG_SIS190=y
CONFIG_SKGE=y
CONFIG_SKGE_DEBUG=y
# CONFIG_SKY2 is not set
# CONFIG_VIA_VELOCITY is not set
CONFIG_TIGON3=y
CONFIG_BNX2=m
CONFIG_CNIC=m
CONFIG_QLA3XXX=y
CONFIG_ATL1=m
CONFIG_ATL1E=m
CONFIG_ATL1C=y
CONFIG_JME=m
CONFIG_NETDEV_10000=y
CONFIG_MDIO=y
CONFIG_CHELSIO_T1=y
CONFIG_CHELSIO_T1_1G=y
CONFIG_CHELSIO_T3_DEPENDS=y
CONFIG_CHELSIO_T3=y
CONFIG_CHELSIO_T4_DEPENDS=y
# CONFIG_CHELSIO_T4 is not set
CONFIG_ENIC=y
# CONFIG_IXGBE is not set
# CONFIG_IXGBEVF is not set
CONFIG_IXGB=m
CONFIG_S2IO=y
CONFIG_MYRI10GE=m
CONFIG_NIU=m
CONFIG_MLX4_EN=y
CONFIG_MLX4_CORE=y
CONFIG_MLX4_DEBUG=y
CONFIG_TEHUTI=m
CONFIG_BNX2X=m
CONFIG_QLCNIC=m
CONFIG_QLGE=m
# CONFIG_SFC is not set
CONFIG_BE2NET=m
CONFIG_TR=m
CONFIG_IBMOL=m
CONFIG_3C359=m
CONFIG_TMS380TR=m
CONFIG_TMSPCI=m
CONFIG_ABYSS=m
CONFIG_WLAN=y
CONFIG_PCMCIA_RAYCS=m
# CONFIG_AIRO is not set
CONFIG_ATMEL=y
CONFIG_PCI_ATMEL=m
CONFIG_PCMCIA_ATMEL=y
# CONFIG_AIRO_CS is not set
CONFIG_PCMCIA_WL3501=y
CONFIG_PRISM54=y
CONFIG_USB_ZD1201=y
CONFIG_HOSTAP=y
CONFIG_HOSTAP_FIRMWARE=y
# CONFIG_HOSTAP_FIRMWARE_NVRAM is not set
# CONFIG_HOSTAP_PLX is not set
CONFIG_HOSTAP_PCI=y
CONFIG_HOSTAP_CS=m

#
# Enable WiMAX (Networking options) to see the WiMAX drivers
#

#
# USB Network Adapters
#
CONFIG_USB_CATC=y
CONFIG_USB_KAWETH=y
CONFIG_USB_PEGASUS=y
CONFIG_USB_RTL8150=y
CONFIG_USB_USBNET=y
# CONFIG_USB_NET_AX8817X is not set
CONFIG_USB_NET_CDCETHER=m
CONFIG_USB_NET_CDC_EEM=y
# CONFIG_USB_NET_DM9601 is not set
CONFIG_USB_NET_SMSC75XX=y
CONFIG_USB_NET_SMSC95XX=y
CONFIG_USB_NET_GL620A=m
# CONFIG_USB_NET_NET1080 is not set
# CONFIG_USB_NET_PLUSB is not set
CONFIG_USB_NET_MCS7830=m
# CONFIG_USB_NET_RNDIS_HOST is not set
# CONFIG_USB_NET_CDC_SUBSET is not set
# CONFIG_USB_NET_ZAURUS is not set
# CONFIG_USB_HSO is not set
# CONFIG_USB_NET_INT51X1 is not set
# CONFIG_USB_CDC_PHONET is not set
CONFIG_USB_IPHETH=y
CONFIG_USB_SIERRA_NET=y
CONFIG_NET_PCMCIA=y
CONFIG_PCMCIA_3C589=m
CONFIG_PCMCIA_3C574=y
# CONFIG_PCMCIA_FMVJ18X is not set
CONFIG_PCMCIA_PCNET=y
CONFIG_PCMCIA_NMCLAN=y
CONFIG_PCMCIA_SMC91C92=m
CONFIG_PCMCIA_XIRC2PS=y
# CONFIG_PCMCIA_AXNET is not set
CONFIG_PCMCIA_IBMTR=m
# CONFIG_WAN is not set
CONFIG_IEEE802154_DRIVERS=m
# CONFIG_IEEE802154_FAKEHARD is not set
CONFIG_FDDI=y
CONFIG_DEFXX=m
CONFIG_DEFXX_MMIO=y
CONFIG_SKFP=m
CONFIG_HIPPI=y
CONFIG_ROADRUNNER=m
CONFIG_ROADRUNNER_LARGE_RINGS=y
CONFIG_PPP=y
CONFIG_PPP_MULTILINK=y
CONFIG_PPP_FILTER=y
# CONFIG_PPP_ASYNC is not set
CONFIG_PPP_SYNC_TTY=m
# CONFIG_PPP_DEFLATE is not set
CONFIG_PPP_BSDCOMP=y
# CONFIG_PPP_MPPE is not set
CONFIG_PPPOE=m
CONFIG_PPPOL2TP=m
CONFIG_SLIP=m
CONFIG_SLIP_COMPRESSED=y
CONFIG_SLHC=y
# CONFIG_SLIP_SMART is not set
CONFIG_SLIP_MODE_SLIP6=y
CONFIG_NET_FC=y
CONFIG_NETCONSOLE=y
CONFIG_NETCONSOLE_DYNAMIC=y
CONFIG_NETPOLL=y
CONFIG_NETPOLL_TRAP=y
CONFIG_NET_POLL_CONTROLLER=y
CONFIG_VIRTIO_NET=m
CONFIG_VMXNET3=m
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set

#
# Input device support
#
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
CONFIG_INPUT_POLLDEV=y
CONFIG_INPUT_SPARSEKMAP=m

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_JOYDEV=m
CONFIG_INPUT_EVDEV=y
CONFIG_INPUT_EVBUG=m

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ADP5588=y
CONFIG_KEYBOARD_ATKBD=y
CONFIG_QT2160=y
# CONFIG_KEYBOARD_LKKBD is not set
CONFIG_KEYBOARD_GPIO=y
# CONFIG_KEYBOARD_TCA6416 is not set
CONFIG_KEYBOARD_MATRIX=y
CONFIG_KEYBOARD_LM8323=y
CONFIG_KEYBOARD_MAX7359=m
CONFIG_KEYBOARD_NEWTON=y
CONFIG_KEYBOARD_OPENCORES=y
CONFIG_KEYBOARD_STOWAWAY=m
CONFIG_KEYBOARD_SUNKBD=y
CONFIG_KEYBOARD_XTKBD=y
CONFIG_INPUT_MOUSE=y
# CONFIG_MOUSE_PS2 is not set
# CONFIG_MOUSE_SERIAL is not set
CONFIG_MOUSE_APPLETOUCH=m
CONFIG_MOUSE_BCM5974=m
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_MOUSE_GPIO is not set
CONFIG_MOUSE_SYNAPTICS_I2C=y
CONFIG_INPUT_JOYSTICK=y
# CONFIG_JOYSTICK_ANALOG is not set
# CONFIG_JOYSTICK_A3D is not set
CONFIG_JOYSTICK_ADI=y
CONFIG_JOYSTICK_COBRA=m
CONFIG_JOYSTICK_GF2K=m
# CONFIG_JOYSTICK_GRIP is not set
# CONFIG_JOYSTICK_GRIP_MP is not set
# CONFIG_JOYSTICK_GUILLEMOT is not set
CONFIG_JOYSTICK_INTERACT=m
# CONFIG_JOYSTICK_SIDEWINDER is not set
CONFIG_JOYSTICK_TMDC=y
CONFIG_JOYSTICK_IFORCE=y
CONFIG_JOYSTICK_IFORCE_USB=y
CONFIG_JOYSTICK_IFORCE_232=y
CONFIG_JOYSTICK_WARRIOR=m
CONFIG_JOYSTICK_MAGELLAN=y
# CONFIG_JOYSTICK_SPACEORB is not set
# CONFIG_JOYSTICK_SPACEBALL is not set
CONFIG_JOYSTICK_STINGER=m
CONFIG_JOYSTICK_TWIDJOY=m
CONFIG_JOYSTICK_ZHENHUA=m
CONFIG_JOYSTICK_JOYDUMP=y
CONFIG_JOYSTICK_XPAD=m
# CONFIG_JOYSTICK_XPAD_FF is not set
CONFIG_JOYSTICK_XPAD_LEDS=y
# CONFIG_INPUT_TABLET is not set
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_AD7879_I2C=y
CONFIG_TOUCHSCREEN_AD7879=y
CONFIG_TOUCHSCREEN_DYNAPRO=m
# CONFIG_TOUCHSCREEN_HAMPSHIRE is not set
CONFIG_TOUCHSCREEN_EETI=m
CONFIG_TOUCHSCREEN_FUJITSU=m
# CONFIG_TOUCHSCREEN_GUNZE is not set
# CONFIG_TOUCHSCREEN_ELO is not set
CONFIG_TOUCHSCREEN_WACOM_W8001=m
CONFIG_TOUCHSCREEN_MCS5000=m
# CONFIG_TOUCHSCREEN_MTOUCH is not set
CONFIG_TOUCHSCREEN_INEXIO=y
# CONFIG_TOUCHSCREEN_MK712 is not set
CONFIG_TOUCHSCREEN_PENMOUNT=y
CONFIG_TOUCHSCREEN_TOUCHRIGHT=y
# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
# CONFIG_TOUCHSCREEN_TSC2007 is not set
CONFIG_TOUCHSCREEN_TPS6507X=m
CONFIG_INPUT_MISC=y
CONFIG_INPUT_AD714X=m
CONFIG_INPUT_AD714X_I2C=m
# CONFIG_INPUT_PCSPKR is not set
CONFIG_INPUT_APANEL=m
# CONFIG_INPUT_ATLAS_BTNS is not set
# CONFIG_INPUT_ATI_REMOTE is not set
CONFIG_INPUT_ATI_REMOTE2=y
CONFIG_INPUT_KEYSPAN_REMOTE=y
# CONFIG_INPUT_POWERMATE is not set
CONFIG_INPUT_YEALINK=y
# CONFIG_INPUT_CM109 is not set
CONFIG_INPUT_UINPUT=m
CONFIG_INPUT_WINBOND_CIR=y
# CONFIG_INPUT_PCF8574 is not set
# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set

#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=m
CONFIG_SERIO_CT82C710=y
CONFIG_SERIO_PCIPS2=y
CONFIG_SERIO_LIBPS2=y
CONFIG_SERIO_RAW=y
CONFIG_SERIO_ALTERA_PS2=m
CONFIG_GAMEPORT=y
# CONFIG_GAMEPORT_NS558 is not set
# CONFIG_GAMEPORT_L4 is not set
# CONFIG_GAMEPORT_EMU10K1 is not set
CONFIG_GAMEPORT_FM801=y

#
# Character devices
#
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
CONFIG_N_GSM=y
# CONFIG_NOZOMI is not set

#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_FIX_EARLYCON_MEM=y
# CONFIG_SERIAL_8250_PCI is not set
CONFIG_SERIAL_8250_PNP=y
# CONFIG_SERIAL_8250_CS is not set
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
# CONFIG_SERIAL_8250_MANY_PORTS is not set
# CONFIG_SERIAL_8250_SHARE_IRQ is not set
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
# CONFIG_SERIAL_8250_RSA is not set

#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_TIMBERDALE is not set
CONFIG_SERIAL_ALTERA_JTAGUART=y
CONFIG_SERIAL_ALTERA_JTAGUART_CONSOLE=y
# CONFIG_SERIAL_ALTERA_JTAGUART_CONSOLE_BYPASS is not set
CONFIG_SERIAL_ALTERA_UART=y
CONFIG_SERIAL_ALTERA_UART_MAXPORTS=4
CONFIG_SERIAL_ALTERA_UART_BAUDRATE=115200
CONFIG_SERIAL_ALTERA_UART_CONSOLE=y
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
CONFIG_HVC_DRIVER=y
CONFIG_VIRTIO_CONSOLE=m
CONFIG_IPMI_HANDLER=y
CONFIG_IPMI_PANIC_EVENT=y
# CONFIG_IPMI_PANIC_STRING is not set
# CONFIG_IPMI_DEVICE_INTERFACE is not set
CONFIG_IPMI_SI=y
CONFIG_IPMI_WATCHDOG=y
CONFIG_IPMI_POWEROFF=y
# CONFIG_HW_RANDOM is not set
CONFIG_NVRAM=m
# CONFIG_RTC is not set
CONFIG_GEN_RTC=m
CONFIG_GEN_RTC_X=y
CONFIG_R3964=y
CONFIG_APPLICOM=y

#
# PCMCIA character devices
#
CONFIG_SYNCLINK_CS=m
CONFIG_CARDMAN_4000=y
# CONFIG_CARDMAN_4040 is not set
CONFIG_IPWIRELESS=m
CONFIG_MWAVE=m
CONFIG_PC8736x_GPIO=y
CONFIG_NSC_GPIO=y
CONFIG_RAW_DRIVER=m
CONFIG_MAX_RAW_DEVS=256
# CONFIG_HPET is not set
# CONFIG_HANGCHECK_TIMER is not set
CONFIG_TCG_TPM=y
CONFIG_TCG_TIS=y
CONFIG_TCG_NSC=y
CONFIG_TCG_ATMEL=m
# CONFIG_TCG_INFINEON is not set
CONFIG_TELCLOCK=m
CONFIG_DEVPORT=y
CONFIG_RAMOOPS=m
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=m
CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_SMBUS=m
CONFIG_I2C_ALGOBIT=y

#
# I2C Hardware Bus support
#

#
# PC SMBus host controller drivers
#
CONFIG_I2C_ALI1535=y
CONFIG_I2C_ALI1563=m
CONFIG_I2C_ALI15X3=m
CONFIG_I2C_AMD756=m
CONFIG_I2C_AMD8111=y
# CONFIG_I2C_I801 is not set
CONFIG_I2C_ISCH=m
CONFIG_I2C_PIIX4=y
CONFIG_I2C_NFORCE2=m
CONFIG_I2C_SIS5595=m
# CONFIG_I2C_SIS630 is not set
CONFIG_I2C_SIS96X=m
CONFIG_I2C_VIA=m
CONFIG_I2C_VIAPRO=y

#
# ACPI drivers
#
CONFIG_I2C_SCMI=y

#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
CONFIG_I2C_GPIO=m
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_PCA_PLATFORM is not set
CONFIG_I2C_SIMTEC=m
# CONFIG_I2C_XILINX is not set

#
# External I2C/SMBus adapter drivers
#
CONFIG_I2C_PARPORT_LIGHT=m
CONFIG_I2C_TAOS_EVM=m
CONFIG_I2C_TINY_USB=m

#
# Other I2C/SMBus bus drivers
#
CONFIG_I2C_STUB=m
CONFIG_I2C_DEBUG_CORE=y
CONFIG_I2C_DEBUG_ALGO=y
CONFIG_I2C_DEBUG_BUS=y
# CONFIG_SPI is not set

#
# PPS support
#
# CONFIG_PPS is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
CONFIG_GPIOLIB=y
CONFIG_GPIO_SYSFS=y
CONFIG_GPIO_MAX730X=m

#
# Memory mapped GPIO expanders:
#
CONFIG_GPIO_IT8761E=y
# CONFIG_GPIO_SCH is not set

#
# I2C GPIO expanders:
#
CONFIG_GPIO_MAX7300=m
# CONFIG_GPIO_MAX732X is not set
# CONFIG_GPIO_PCA953X is not set
CONFIG_GPIO_PCF857X=m
# CONFIG_GPIO_ADP5588 is not set

#
# PCI GPIO expanders:
#
CONFIG_GPIO_CS5535=m
CONFIG_GPIO_BT8XX=y
CONFIG_GPIO_LANGWELL=y
CONFIG_GPIO_RDC321X=y

#
# SPI GPIO expanders:
#

#
# AC97 GPIO expanders:
#

#
# MODULbus GPIO expanders:
#
CONFIG_W1=y
CONFIG_W1_CON=y

#
# 1-wire Bus Masters
#
# CONFIG_W1_MASTER_MATROX is not set
# CONFIG_W1_MASTER_DS2490 is not set
CONFIG_W1_MASTER_DS2482=m
CONFIG_W1_MASTER_GPIO=m

#
# 1-wire Slaves
#
# CONFIG_W1_SLAVE_THERM is not set
CONFIG_W1_SLAVE_SMEM=m
CONFIG_W1_SLAVE_DS2431=y
CONFIG_W1_SLAVE_DS2433=m
CONFIG_W1_SLAVE_DS2433_CRC=y
CONFIG_W1_SLAVE_DS2760=y
# CONFIG_W1_SLAVE_BQ27000 is not set
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
# CONFIG_PDA_POWER is not set
CONFIG_TEST_POWER=y
CONFIG_BATTERY_DS2760=y
CONFIG_BATTERY_DS2782=m
# CONFIG_BATTERY_BQ27x00 is not set
# CONFIG_BATTERY_MAX17040 is not set
CONFIG_HWMON=y
CONFIG_HWMON_VID=y
# CONFIG_HWMON_DEBUG_CHIP is not set

#
# Native drivers
#
CONFIG_SENSORS_ABITUGURU=m
CONFIG_SENSORS_ABITUGURU3=m
# CONFIG_SENSORS_AD7414 is not set
CONFIG_SENSORS_AD7418=m
CONFIG_SENSORS_ADM1021=y
# CONFIG_SENSORS_ADM1025 is not set
CONFIG_SENSORS_ADM1026=y
# CONFIG_SENSORS_ADM1029 is not set
CONFIG_SENSORS_ADM1031=m
# CONFIG_SENSORS_ADM9240 is not set
CONFIG_SENSORS_ADT7411=m
CONFIG_SENSORS_ADT7462=m
CONFIG_SENSORS_ADT7470=m
CONFIG_SENSORS_ADT7475=y
CONFIG_SENSORS_ASC7621=m
CONFIG_SENSORS_K8TEMP=y
# CONFIG_SENSORS_K10TEMP is not set
# CONFIG_SENSORS_ASB100 is not set
# CONFIG_SENSORS_ATXP1 is not set
CONFIG_SENSORS_DS1621=y
CONFIG_SENSORS_I5K_AMB=m
CONFIG_SENSORS_F71805F=y
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
CONFIG_SENSORS_FSCHMD=y
# CONFIG_SENSORS_G760A is not set
CONFIG_SENSORS_GL518SM=m
# CONFIG_SENSORS_GL520SM is not set
CONFIG_SENSORS_CORETEMP=m
CONFIG_SENSORS_IBMAEM=y
# CONFIG_SENSORS_IBMPEX is not set
# CONFIG_SENSORS_IT87 is not set
CONFIG_SENSORS_LM63=m
CONFIG_SENSORS_LM73=y
CONFIG_SENSORS_LM75=y
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_LM80 is not set
CONFIG_SENSORS_LM83=y
CONFIG_SENSORS_LM85=m
# CONFIG_SENSORS_LM87 is not set
CONFIG_SENSORS_LTC4215=y
CONFIG_SENSORS_LTC4245=y
CONFIG_SENSORS_LM95241=m
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
CONFIG_SENSORS_PCF8591=y
CONFIG_SENSORS_SHT15=y
CONFIG_SENSORS_SIS5595=m
CONFIG_SENSORS_DME1737=y
CONFIG_SENSORS_EMC1403=y
CONFIG_SENSORS_SMSC47M1=y
# CONFIG_SENSORS_SMSC47M192 is not set
CONFIG_SENSORS_SMSC47B397=m
CONFIG_SENSORS_ADS7828=y
# CONFIG_SENSORS_AMC6821 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_TMP102 is not set
CONFIG_SENSORS_TMP401=m
CONFIG_SENSORS_TMP421=y
# CONFIG_SENSORS_VIA_CPUTEMP is not set
# CONFIG_SENSORS_VIA686A is not set
CONFIG_SENSORS_VT1211=m
CONFIG_SENSORS_VT8231=y
# CONFIG_SENSORS_W83781D is not set
CONFIG_SENSORS_W83791D=m
CONFIG_SENSORS_W83792D=m
CONFIG_SENSORS_W83793=m
# CONFIG_SENSORS_W83L785TS is not set
CONFIG_SENSORS_W83L786NG=m
# CONFIG_SENSORS_HDAPS is not set
CONFIG_SENSORS_LIS3_I2C=m
CONFIG_SENSORS_APPLESMC=y

#
# ACPI drivers
#
# CONFIG_SENSORS_ATK0110 is not set
CONFIG_SENSORS_LIS3LV02D=y
CONFIG_THERMAL=y
# CONFIG_THERMAL_HWMON is not set
CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_NOWAYOUT=y

#
# Watchdog Device Drivers
#
CONFIG_SOFT_WATCHDOG=m
# CONFIG_ACQUIRE_WDT is not set
CONFIG_ADVANTECH_WDT=m
# CONFIG_ALIM1535_WDT is not set
# CONFIG_ALIM7101_WDT is not set
CONFIG_GEODE_WDT=m
CONFIG_SC520_WDT=m
# CONFIG_IB700_WDT is not set
CONFIG_IBMASR=y
# CONFIG_WAFER_WDT is not set
CONFIG_I6300ESB_WDT=m
CONFIG_ITCO_WDT=y
CONFIG_ITCO_VENDOR_SUPPORT=y
# CONFIG_IT8712F_WDT is not set
# CONFIG_IT87_WDT is not set
CONFIG_HP_WATCHDOG=m
CONFIG_SC1200_WDT=y
CONFIG_PC87413_WDT=y
# CONFIG_60XX_WDT is not set
# CONFIG_SBC8360_WDT is not set
CONFIG_CPU5_WDT=m
# CONFIG_SMSC_SCH311X_WDT is not set
# CONFIG_SMSC37B787_WDT is not set
# CONFIG_W83627HF_WDT is not set
# CONFIG_W83877F_WDT is not set
CONFIG_W83977F_WDT=m
CONFIG_MACHZ_WDT=m
CONFIG_SBC_EPX_C3_WATCHDOG=y

#
# PCI-based Watchdog Cards
#
# CONFIG_PCIPCWATCHDOG is not set
CONFIG_WDTPCI=y

#
# USB-based Watchdog Cards
#
# CONFIG_USBPCWATCHDOG is not set
CONFIG_SSB_POSSIBLE=y

#
# Sonics Silicon Backplane
#
CONFIG_SSB=m
CONFIG_SSB_SPROM=y
CONFIG_SSB_PCIHOST_POSSIBLE=y
CONFIG_SSB_PCIHOST=y
# CONFIG_SSB_B43_PCI_BRIDGE is not set
CONFIG_SSB_PCMCIAHOST_POSSIBLE=y
CONFIG_SSB_PCMCIAHOST=y
CONFIG_SSB_SILENT=y
CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
CONFIG_SSB_DRIVER_PCICORE=y
# CONFIG_MFD_SUPPORT is not set
CONFIG_MFD_CORE=y
CONFIG_LPC_SCH=m
CONFIG_MFD_RDC321X=y
CONFIG_REGULATOR=y
# CONFIG_REGULATOR_DEBUG is not set
CONFIG_REGULATOR_DUMMY=y
# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
CONFIG_REGULATOR_USERSPACE_CONSUMER=m
CONFIG_REGULATOR_BQ24022=m
# CONFIG_REGULATOR_MAX1586 is not set
# CONFIG_REGULATOR_MAX8649 is not set
CONFIG_REGULATOR_MAX8660=y
CONFIG_REGULATOR_LP3971=m
CONFIG_REGULATOR_TPS65023=y
# CONFIG_REGULATOR_TPS6507X is not set
CONFIG_MEDIA_SUPPORT=m

#
# Multimedia core support
#
# CONFIG_VIDEO_DEV is not set
CONFIG_DVB_CORE=m
CONFIG_VIDEO_MEDIA=m

#
# Multimedia drivers
#
CONFIG_IR_CORE=m
CONFIG_VIDEO_IR=m
CONFIG_RC_MAP=m
# CONFIG_IR_NEC_DECODER is not set
CONFIG_IR_RC5_DECODER=m
# CONFIG_IR_RC6_DECODER is not set
CONFIG_IR_JVC_DECODER=m
CONFIG_IR_SONY_DECODER=m
CONFIG_IR_IMON=m
# CONFIG_MEDIA_ATTACH is not set
CONFIG_MEDIA_TUNER=m
# CONFIG_MEDIA_TUNER_CUSTOMISE is not set
CONFIG_MEDIA_TUNER_SIMPLE=m
CONFIG_MEDIA_TUNER_TDA8290=m
CONFIG_MEDIA_TUNER_TDA9887=m
CONFIG_MEDIA_TUNER_TEA5761=m
CONFIG_MEDIA_TUNER_TEA5767=m
CONFIG_MEDIA_TUNER_MT20XX=m
CONFIG_MEDIA_TUNER_XC2028=m
CONFIG_MEDIA_TUNER_XC5000=m
CONFIG_MEDIA_TUNER_MC44S803=m
CONFIG_DVB_MAX_ADAPTERS=8
CONFIG_DVB_DYNAMIC_MINORS=y
# CONFIG_DVB_CAPTURE_DRIVERS is not set
# CONFIG_DAB is not set

#
# Graphics support
#
CONFIG_AGP=y
# CONFIG_AGP_AMD64 is not set
CONFIG_AGP_INTEL=y
CONFIG_AGP_SIS=m
# CONFIG_AGP_VIA is not set
# CONFIG_VGA_ARB is not set
CONFIG_VGA_SWITCHEROO=y
CONFIG_DRM=y
CONFIG_DRM_KMS_HELPER=y
CONFIG_DRM_TTM=y
CONFIG_DRM_TDFX=y
CONFIG_DRM_R128=m
CONFIG_DRM_RADEON=y
# CONFIG_DRM_I810 is not set
# CONFIG_DRM_I830 is not set
# CONFIG_DRM_I915 is not set
CONFIG_DRM_MGA=y
CONFIG_DRM_SIS=m
# CONFIG_DRM_VIA is not set
CONFIG_DRM_SAVAGE=m
CONFIG_VGASTATE=y
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
CONFIG_FB=y
CONFIG_FIRMWARE_EDID=y
CONFIG_FB_DDC=m
# CONFIG_FB_BOOT_VESA_SUPPORT is not set
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
CONFIG_FB_SYS_FILLRECT=y
CONFIG_FB_SYS_COPYAREA=y
CONFIG_FB_SYS_IMAGEBLIT=y
CONFIG_FB_FOREIGN_ENDIAN=y
# CONFIG_FB_BOTH_ENDIAN is not set
CONFIG_FB_BIG_ENDIAN=y
# CONFIG_FB_LITTLE_ENDIAN is not set
CONFIG_FB_SYS_FOPS=y
CONFIG_FB_DEFERRED_IO=y
CONFIG_FB_HECUBA=y
CONFIG_FB_SVGALIB=y
# CONFIG_FB_MACMODES is not set
CONFIG_FB_BACKLIGHT=y
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y

#
# Frame buffer hardware drivers
#
CONFIG_FB_PM2=m
CONFIG_FB_PM2_FIFO_DISCONNECT=y
CONFIG_FB_CYBER2000=m
CONFIG_FB_ARC=m
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_UVESA is not set
CONFIG_FB_N411=y
CONFIG_FB_HGA=m
CONFIG_FB_HGA_ACCEL=y
CONFIG_FB_S1D13XXX=y
CONFIG_FB_NVIDIA=m
CONFIG_FB_NVIDIA_I2C=y
CONFIG_FB_NVIDIA_DEBUG=y
CONFIG_FB_NVIDIA_BACKLIGHT=y
CONFIG_FB_RIVA=y
# CONFIG_FB_RIVA_I2C is not set
CONFIG_FB_RIVA_DEBUG=y
# CONFIG_FB_RIVA_BACKLIGHT is not set
# CONFIG_FB_LE80578 is not set
CONFIG_FB_INTEL=m
CONFIG_FB_INTEL_DEBUG=y
CONFIG_FB_INTEL_I2C=y
CONFIG_FB_MATROX=y
CONFIG_FB_MATROX_MILLENIUM=y
CONFIG_FB_MATROX_MYSTIQUE=y
CONFIG_FB_MATROX_G=y
# CONFIG_FB_MATROX_I2C is not set
CONFIG_FB_ATY128=m
CONFIG_FB_ATY128_BACKLIGHT=y
CONFIG_FB_ATY=y
CONFIG_FB_ATY_CT=y
CONFIG_FB_ATY_GENERIC_LCD=y
# CONFIG_FB_ATY_GX is not set
# CONFIG_FB_ATY_BACKLIGHT is not set
CONFIG_FB_S3=m
# CONFIG_FB_SAVAGE is not set
CONFIG_FB_SIS=m
CONFIG_FB_SIS_300=y
# CONFIG_FB_SIS_315 is not set
CONFIG_FB_VIA=m
CONFIG_FB_VIA_DIRECT_PROCFS=y
CONFIG_FB_NEOMAGIC=m
CONFIG_FB_KYRO=y
CONFIG_FB_3DFX=m
CONFIG_FB_3DFX_ACCEL=y
# CONFIG_FB_3DFX_I2C is not set
CONFIG_FB_VOODOO1=m
CONFIG_FB_VT8623=y
CONFIG_FB_TRIDENT=y
CONFIG_FB_ARK=y
CONFIG_FB_PM3=m
CONFIG_FB_CARMINE=m
# CONFIG_FB_CARMINE_DRAM_EVAL is not set
CONFIG_CARMINE_DRAM_CUSTOM=y
CONFIG_FB_GEODE=y
# CONFIG_FB_GEODE_LX is not set
# CONFIG_FB_GEODE_GX is not set
CONFIG_FB_GEODE_GX1=m
CONFIG_FB_TMIO=y
# CONFIG_FB_TMIO_ACCELL is not set
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_MB862XX is not set
CONFIG_FB_BROADSHEET=m
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=y
# CONFIG_LCD_PLATFORM is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=y
CONFIG_BACKLIGHT_GENERIC=m
CONFIG_BACKLIGHT_PROGEAR=y
CONFIG_BACKLIGHT_MBP_NVIDIA=m
CONFIG_BACKLIGHT_SAHARA=m
CONFIG_BACKLIGHT_ADP8860=y

#
# Display device support
#
CONFIG_DISPLAY_SUPPORT=m

#
# Display hardware drivers
#

#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
CONFIG_VGACON_SOFT_SCROLLBACK=y
CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64
CONFIG_DUMMY_CONSOLE=y
CONFIG_LOGO=y
CONFIG_LOGO_LINUX_MONO=y
CONFIG_LOGO_LINUX_VGA16=y
# CONFIG_LOGO_LINUX_CLUT224 is not set
CONFIG_SOUND=y
CONFIG_SOUND_OSS_CORE=y
CONFIG_SOUND_OSS_CORE_PRECLAIM=y
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
CONFIG_SND_HWDEP=m
CONFIG_SND_RAWMIDI=m
CONFIG_SND_JACK=y
CONFIG_SND_SEQUENCER=m
CONFIG_SND_SEQ_DUMMY=m
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
CONFIG_SND_PCM_OSS_PLUGINS=y
# CONFIG_SND_SEQUENCER_OSS is not set
# CONFIG_SND_HRTIMER is not set
CONFIG_SND_DYNAMIC_MINORS=y
# CONFIG_SND_SUPPORT_OLD_API is not set
CONFIG_SND_VERBOSE_PROCFS=y
CONFIG_SND_VERBOSE_PRINTK=y
CONFIG_SND_DEBUG=y
# CONFIG_SND_DEBUG_VERBOSE is not set
# CONFIG_SND_PCM_XRUN_DEBUG is not set
CONFIG_SND_DMA_SGBUF=y
CONFIG_SND_RAWMIDI_SEQ=m
# CONFIG_SND_OPL3_LIB_SEQ is not set
# CONFIG_SND_OPL4_LIB_SEQ is not set
# CONFIG_SND_SBAWE_SEQ is not set
# CONFIG_SND_EMU10K1_SEQ is not set
CONFIG_SND_MPU401_UART=m
CONFIG_SND_VX_LIB=m
CONFIG_SND_DRIVERS=y
CONFIG_SND_PCSP=m
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_VIRMIDI is not set
# CONFIG_SND_SERIAL_U16550 is not set
CONFIG_SND_MPU401=m
# CONFIG_SND_PCI is not set
CONFIG_SND_USB=y
CONFIG_SND_USB_AUDIO=m
CONFIG_SND_USB_UA101=m
CONFIG_SND_USB_USX2Y=m
CONFIG_SND_USB_CAIAQ=m
CONFIG_SND_USB_CAIAQ_INPUT=y
CONFIG_SND_USB_US122L=m
CONFIG_SND_PCMCIA=y
CONFIG_SND_VXPOCKET=m
CONFIG_SND_PDAUDIOCF=m
CONFIG_SND_SOC=m
CONFIG_SND_SOC_I2C_AND_SPI=m
# CONFIG_SND_SOC_ALL_CODECS is not set
# CONFIG_SOUND_PRIME is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=m
# CONFIG_HIDRAW is not set

#
# USB Input Devices
#
# CONFIG_USB_HID is not set
CONFIG_HID_PID=y

#
# USB HID Boot Protocol drivers
#
# CONFIG_USB_KBD is not set
CONFIG_USB_MOUSE=y

#
# Special HID drivers
#
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y

#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_DEVICE_CLASS is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
CONFIG_USB_SUSPEND=y
# CONFIG_USB_OTG is not set
# CONFIG_USB_OTG_WHITELIST is not set
CONFIG_USB_OTG_BLACKLIST_HUB=y
# CONFIG_USB_MON is not set
CONFIG_USB_WUSB=y
# CONFIG_USB_WUSB_CBAF is not set

#
# USB Host Controller Drivers
#
CONFIG_USB_C67X00_HCD=y
CONFIG_USB_XHCI_HCD=m
CONFIG_USB_XHCI_HCD_DEBUGGING=y
CONFIG_USB_EHCI_HCD=y
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
CONFIG_USB_EHCI_TT_NEWSCHED=y
CONFIG_USB_OXU210HP_HCD=y
CONFIG_USB_ISP116X_HCD=y
CONFIG_USB_ISP1760_HCD=y
CONFIG_USB_ISP1362_HCD=m
CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_UHCI_HCD=y
# CONFIG_USB_U132_HCD is not set
# CONFIG_USB_SL811_HCD is not set
CONFIG_USB_R8A66597_HCD=y
CONFIG_USB_HWA_HCD=y

#
# USB Device Class drivers
#
# CONFIG_USB_ACM is not set
CONFIG_USB_PRINTER=m
CONFIG_USB_WDM=y
CONFIG_USB_TMC=y

#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#

#
# also be needed; see USB_STORAGE Help for more info
#
# CONFIG_USB_STORAGE is not set
CONFIG_USB_LIBUSUAL=y

#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
CONFIG_USB_MICROTEK=m

#
# USB port drivers
#
CONFIG_USB_SERIAL=m
CONFIG_USB_EZUSB=y
CONFIG_USB_SERIAL_GENERIC=y
CONFIG_USB_SERIAL_AIRCABLE=m
CONFIG_USB_SERIAL_ARK3116=m
CONFIG_USB_SERIAL_BELKIN=m
CONFIG_USB_SERIAL_CH341=m
CONFIG_USB_SERIAL_WHITEHEAT=m
CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
CONFIG_USB_SERIAL_CP210X=m
CONFIG_USB_SERIAL_CYPRESS_M8=m
CONFIG_USB_SERIAL_EMPEG=m
CONFIG_USB_SERIAL_FTDI_SIO=m
# CONFIG_USB_SERIAL_FUNSOFT is not set
CONFIG_USB_SERIAL_VISOR=m
# CONFIG_USB_SERIAL_IPAQ is not set
# CONFIG_USB_SERIAL_IR is not set
CONFIG_USB_SERIAL_EDGEPORT=m
CONFIG_USB_SERIAL_EDGEPORT_TI=m
# CONFIG_USB_SERIAL_GARMIN is not set
CONFIG_USB_SERIAL_IPW=m
CONFIG_USB_SERIAL_IUU=m
CONFIG_USB_SERIAL_KEYSPAN_PDA=m
CONFIG_USB_SERIAL_KEYSPAN=m
CONFIG_USB_SERIAL_KEYSPAN_MPR=y
CONFIG_USB_SERIAL_KEYSPAN_USA28=y
CONFIG_USB_SERIAL_KEYSPAN_USA28X=y
# CONFIG_USB_SERIAL_KEYSPAN_USA28XA is not set
CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y
CONFIG_USB_SERIAL_KEYSPAN_USA19=y
CONFIG_USB_SERIAL_KEYSPAN_USA18X=y
CONFIG_USB_SERIAL_KEYSPAN_USA19W=y
CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y
# CONFIG_USB_SERIAL_KEYSPAN_USA19QI is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA49W is not set
CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
CONFIG_USB_SERIAL_KLSI=m
# CONFIG_USB_SERIAL_KOBIL_SCT is not set
CONFIG_USB_SERIAL_MCT_U232=m
CONFIG_USB_SERIAL_MOS7720=m
# CONFIG_USB_SERIAL_MOS7840 is not set
# CONFIG_USB_SERIAL_MOTOROLA is not set
CONFIG_USB_SERIAL_NAVMAN=m
CONFIG_USB_SERIAL_PL2303=m
CONFIG_USB_SERIAL_OTI6858=m
CONFIG_USB_SERIAL_QCAUX=m
CONFIG_USB_SERIAL_QUALCOMM=m
CONFIG_USB_SERIAL_SPCP8X5=m
CONFIG_USB_SERIAL_HP4X=m
CONFIG_USB_SERIAL_SAFE=m
# CONFIG_USB_SERIAL_SAFE_PADDED is not set
CONFIG_USB_SERIAL_SIEMENS_MPI=m
CONFIG_USB_SERIAL_SIERRAWIRELESS=m
CONFIG_USB_SERIAL_SYMBOL=m
CONFIG_USB_SERIAL_TI=m
# CONFIG_USB_SERIAL_CYBERJACK is not set
# CONFIG_USB_SERIAL_XIRCOM is not set
CONFIG_USB_SERIAL_WWAN=m
CONFIG_USB_SERIAL_OPTION=m
# CONFIG_USB_SERIAL_OMNINET is not set
CONFIG_USB_SERIAL_OPTICON=m
# CONFIG_USB_SERIAL_VIVOPAY_SERIAL is not set
CONFIG_USB_SERIAL_ZIO=m
# CONFIG_USB_SERIAL_DEBUG is not set

#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
CONFIG_USB_EMI26=m
CONFIG_USB_ADUTUX=y
CONFIG_USB_SEVSEG=y
CONFIG_USB_RIO500=y
# CONFIG_USB_LEGOTOWER is not set
CONFIG_USB_LCD=y
CONFIG_USB_LED=m
CONFIG_USB_CYPRESS_CY7C63=y
# CONFIG_USB_CYTHERM is not set
CONFIG_USB_IDMOUSE=m
CONFIG_USB_FTDI_ELAN=y
CONFIG_USB_APPLEDISPLAY=m
# CONFIG_USB_SISUSBVGA is not set
CONFIG_USB_LD=m
# CONFIG_USB_TRANCEVIBRATOR is not set
CONFIG_USB_IOWARRIOR=m
CONFIG_USB_TEST=y
CONFIG_USB_ISIGHTFW=y

#
# OTG and related infrastructure
#
CONFIG_USB_OTG_UTILS=y
CONFIG_USB_GPIO_VBUS=m
CONFIG_NOP_USB_XCEIV=m
CONFIG_UWB=y
CONFIG_UWB_HWA=y
CONFIG_UWB_WHCI=m
CONFIG_UWB_WLP=y
CONFIG_UWB_I1480U=m
# CONFIG_UWB_I1480U_WLP is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y

#
# LED drivers
#
CONFIG_LEDS_NET5501=m
CONFIG_LEDS_ALIX2=m
# CONFIG_LEDS_PCA9532 is not set
CONFIG_LEDS_GPIO=y
CONFIG_LEDS_GPIO_PLATFORM=y
# CONFIG_LEDS_LP3944 is not set
# CONFIG_LEDS_PCA955X is not set
# CONFIG_LEDS_REGULATOR is not set
CONFIG_LEDS_BD2802=m
CONFIG_LEDS_LT3593=y
CONFIG_LEDS_TRIGGERS=y

#
# LED Triggers
#
CONFIG_LEDS_TRIGGER_TIMER=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
CONFIG_LEDS_TRIGGER_BACKLIGHT=m
# CONFIG_LEDS_TRIGGER_GPIO is not set
CONFIG_LEDS_TRIGGER_DEFAULT_ON=y

#
# iptables trigger is under Netfilter config (LED target)
#
# CONFIG_ACCESSIBILITY is not set
CONFIG_INFINIBAND=y
CONFIG_INFINIBAND_USER_MAD=m
CONFIG_INFINIBAND_USER_ACCESS=y
CONFIG_INFINIBAND_USER_MEM=y
CONFIG_INFINIBAND_ADDR_TRANS=y
CONFIG_INFINIBAND_MTHCA=m
CONFIG_INFINIBAND_MTHCA_DEBUG=y
CONFIG_INFINIBAND_IPATH=y
CONFIG_INFINIBAND_QIB=m
# CONFIG_INFINIBAND_AMSO1100 is not set
CONFIG_INFINIBAND_CXGB3=m
CONFIG_INFINIBAND_CXGB3_DEBUG=y
# CONFIG_MLX4_INFINIBAND is not set
# CONFIG_INFINIBAND_NES is not set
CONFIG_INFINIBAND_IPOIB=m
CONFIG_INFINIBAND_IPOIB_CM=y
CONFIG_INFINIBAND_IPOIB_DEBUG=y
# CONFIG_INFINIBAND_IPOIB_DEBUG_DATA is not set
# CONFIG_INFINIBAND_SRP is not set
CONFIG_INFINIBAND_ISER=m
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
CONFIG_AUXDISPLAY=y
CONFIG_UIO=m
CONFIG_UIO_CIF=m
CONFIG_UIO_PDRV=m
CONFIG_UIO_PDRV_GENIRQ=m
CONFIG_UIO_AEC=m
CONFIG_UIO_SERCOS3=m
CONFIG_UIO_PCI_GENERIC=m
CONFIG_UIO_NETX=m
# CONFIG_X86_PLATFORM_DEVICES is not set

#
# Firmware Drivers
#
# CONFIG_EDD is not set
CONFIG_FIRMWARE_MEMMAP=y
CONFIG_DELL_RBU=m
CONFIG_DCDBAS=y
# CONFIG_ISCSI_IBFT_FIND is not set

#
# File systems
#
# CONFIG_EXT2_FS is not set
CONFIG_EXT3_FS=y
CONFIG_EXT3_DEFAULTS_TO_ORDERED=y
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
# CONFIG_EXT4_FS is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_JBD2=m
# CONFIG_JBD2_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
CONFIG_JFS_FS=y
CONFIG_JFS_POSIX_ACL=y
# CONFIG_JFS_SECURITY is not set
CONFIG_JFS_DEBUG=y
# CONFIG_JFS_STATISTICS is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_XFS_FS=y
CONFIG_XFS_QUOTA=y
CONFIG_XFS_POSIX_ACL=y
# CONFIG_XFS_RT is not set
CONFIG_XFS_DEBUG=y
# CONFIG_GFS2_FS is not set
CONFIG_OCFS2_FS=m
CONFIG_OCFS2_FS_O2CB=m
CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
# CONFIG_OCFS2_FS_STATS is not set
# CONFIG_OCFS2_DEBUG_MASKLOG is not set
CONFIG_OCFS2_DEBUG_FS=y
CONFIG_BTRFS_FS=y
CONFIG_BTRFS_FS_POSIX_ACL=y
# CONFIG_NILFS2_FS is not set
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_QUOTA=y
CONFIG_QUOTA_NETLINK_INTERFACE=y
CONFIG_PRINT_QUOTA_WARNING=y
CONFIG_QUOTA_DEBUG=y
CONFIG_QUOTA_TREE=m
# CONFIG_QFMT_V1 is not set
# CONFIG_QFMT_V2 is not set
CONFIG_QUOTACTL=y
CONFIG_QUOTACTL_COMPAT=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set

#
# Caches
#
CONFIG_FSCACHE=m
CONFIG_FSCACHE_STATS=y
CONFIG_FSCACHE_HISTOGRAM=y
CONFIG_FSCACHE_DEBUG=y
# CONFIG_FSCACHE_OBJECT_LIST is not set
CONFIG_CACHEFILES=m
CONFIG_CACHEFILES_DEBUG=y
# CONFIG_CACHEFILES_HISTOGRAM is not set

#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=m
# CONFIG_JOLIET is not set
# CONFIG_ZISOFS is not set
CONFIG_UDF_FS=m
CONFIG_UDF_NLS=y

#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
# CONFIG_VFAT_FS is not set
CONFIG_FAT_DEFAULT_CODEPAGE=437
# CONFIG_NTFS_FS is not set

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_VMCORE=y
CONFIG_PROC_SYSCTL=y
# CONFIG_PROC_PAGE_MONITOR is not set
CONFIG_SYSFS=y
# CONFIG_TMPFS is not set
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_CONFIGFS_FS=y
# CONFIG_MISC_FILESYSTEMS is not set
CONFIG_NETWORK_FILESYSTEMS=y
# CONFIG_NFS_FS is not set
CONFIG_NFSD=y
CONFIG_NFSD_V2_ACL=y
CONFIG_NFSD_V3=y
CONFIG_NFSD_V3_ACL=y
CONFIG_NFSD_V4=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=y
CONFIG_NFS_ACL_SUPPORT=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
CONFIG_SUNRPC_XPRT_RDMA=y
CONFIG_RPCSEC_GSS_KRB5=y
CONFIG_RPCSEC_GSS_SPKM3=m
# CONFIG_SMB_FS is not set
CONFIG_CEPH_FS=y
CONFIG_CEPH_FS_PRETTYDEBUG=y
# CONFIG_CIFS is not set
CONFIG_NCP_FS=m
# CONFIG_NCPFS_PACKET_SIGNING is not set
CONFIG_NCPFS_IOCTL_LOCKING=y
# CONFIG_NCPFS_STRONG is not set
CONFIG_NCPFS_NFS_NS=y
# CONFIG_NCPFS_OS2_NS is not set
# CONFIG_NCPFS_SMALLDOS is not set
# CONFIG_NCPFS_NLS is not set
CONFIG_NCPFS_EXTRAS=y
CONFIG_CODA_FS=y
CONFIG_AFS_FS=y
# CONFIG_AFS_DEBUG is not set

#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
CONFIG_ACORN_PARTITION=y
CONFIG_ACORN_PARTITION_CUMANA=y
# CONFIG_ACORN_PARTITION_EESOX is not set
CONFIG_ACORN_PARTITION_ICS=y
# CONFIG_ACORN_PARTITION_ADFS is not set
CONFIG_ACORN_PARTITION_POWERTEC=y
CONFIG_ACORN_PARTITION_RISCIX=y
CONFIG_OSF_PARTITION=y
CONFIG_AMIGA_PARTITION=y
CONFIG_ATARI_PARTITION=y
CONFIG_MAC_PARTITION=y
CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
# CONFIG_MINIX_SUBPARTITION is not set
CONFIG_SOLARIS_X86_PARTITION=y
CONFIG_UNIXWARE_DISKLABEL=y
# CONFIG_LDM_PARTITION is not set
CONFIG_SGI_PARTITION=y
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
CONFIG_KARMA_PARTITION=y
CONFIG_EFI_PARTITION=y
# CONFIG_SYSV68_PARTITION is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
# CONFIG_NLS_CODEPAGE_437 is not set
CONFIG_NLS_CODEPAGE_737=m
CONFIG_NLS_CODEPAGE_775=y
CONFIG_NLS_CODEPAGE_850=m
CONFIG_NLS_CODEPAGE_852=y
CONFIG_NLS_CODEPAGE_855=y
# CONFIG_NLS_CODEPAGE_857 is not set
CONFIG_NLS_CODEPAGE_860=m
# CONFIG_NLS_CODEPAGE_861 is not set
CONFIG_NLS_CODEPAGE_862=m
CONFIG_NLS_CODEPAGE_863=m
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
CONFIG_NLS_CODEPAGE_869=m
CONFIG_NLS_CODEPAGE_936=y
CONFIG_NLS_CODEPAGE_950=y
# CONFIG_NLS_CODEPAGE_932 is not set
CONFIG_NLS_CODEPAGE_949=m
CONFIG_NLS_CODEPAGE_874=y
CONFIG_NLS_ISO8859_8=y
CONFIG_NLS_CODEPAGE_1250=m
CONFIG_NLS_CODEPAGE_1251=y
# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=m
CONFIG_NLS_ISO8859_2=y
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
CONFIG_NLS_ISO8859_5=y
CONFIG_NLS_ISO8859_6=y
CONFIG_NLS_ISO8859_7=y
CONFIG_NLS_ISO8859_9=m
CONFIG_NLS_ISO8859_13=m
CONFIG_NLS_ISO8859_14=m
CONFIG_NLS_ISO8859_15=m
CONFIG_NLS_KOI8_R=y
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_UTF8=m
CONFIG_DLM=m
# CONFIG_DLM_DEBUG is not set

#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_PRINTK_TIME=y
CONFIG_ENABLE_WARN_DEPRECATED=y
# CONFIG_ENABLE_MUST_CHECK is not set
CONFIG_FRAME_WARN=2048
CONFIG_MAGIC_SYSRQ=y
CONFIG_STRIP_ASM_SYMS=y
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
# CONFIG_HARDLOCKUP_DETECTOR is not set
CONFIG_SCHED_DEBUG=y
CONFIG_SCHEDSTATS=y
CONFIG_STACKTRACE=y
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_MEMORY_INIT=y
CONFIG_ARCH_WANT_FRAME_POINTERS=y
CONFIG_FRAME_POINTER=y
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
CONFIG_LKDTM=y
CONFIG_LATENCYTOP=y
# CONFIG_SYSCTL_SYSCALL_CHECK is not set
CONFIG_USER_STACKTRACE_SUPPORT=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_FP_TEST=y
CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
CONFIG_PROVIDE_OHCI1394_DMA_INIT=y
CONFIG_FIREWIRE_OHCI_REMOTE_DMA=y
# CONFIG_DYNAMIC_DEBUG is not set
CONFIG_DMA_API_DEBUG=y
CONFIG_ATOMIC64_SELFTEST=y
CONFIG_SAMPLES=y
# CONFIG_SAMPLE_KOBJECT is not set
# CONFIG_SAMPLE_KPROBES is not set
CONFIG_SAMPLE_HW_BREAKPOINT=m
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_HAVE_ARCH_KMEMCHECK=y
# CONFIG_STRICT_DEVMEM is not set
# CONFIG_X86_VERBOSE_BOOTUP is not set
CONFIG_EARLY_PRINTK=y
CONFIG_EARLY_PRINTK_DBGP=y
# CONFIG_IOMMU_STRESS is not set
CONFIG_HAVE_MMIOTRACE_SUPPORT=y
CONFIG_IO_DELAY_TYPE_0X80=0
CONFIG_IO_DELAY_TYPE_0XED=1
CONFIG_IO_DELAY_TYPE_UDELAY=2
CONFIG_IO_DELAY_TYPE_NONE=3
# CONFIG_IO_DELAY_0X80 is not set
CONFIG_IO_DELAY_0XED=y
# CONFIG_IO_DELAY_UDELAY is not set
# CONFIG_IO_DELAY_NONE is not set
CONFIG_DEFAULT_IO_DELAY_TYPE=1
# CONFIG_OPTIMIZE_INLINING is not set

#
# Security options
#
CONFIG_KEYS=y
CONFIG_KEYS_DEBUG_PROC_KEYS=y
CONFIG_SECURITY=y
CONFIG_SECURITYFS=y
# CONFIG_SECURITY_NETWORK is not set
CONFIG_SECURITY_PATH=y
CONFIG_INTEL_TXT=y
# CONFIG_SECURITY_TOMOYO is not set
CONFIG_IMA=y
CONFIG_IMA_MEASURE_PCR_IDX=10
CONFIG_IMA_AUDIT=y
# CONFIG_DEFAULT_SECURITY_SELINUX is not set
# CONFIG_DEFAULT_SECURITY_SMACK is not set
# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
CONFIG_DEFAULT_SECURITY_DAC=y
CONFIG_DEFAULT_SECURITY=""
CONFIG_XOR_BLOCKS=m
CONFIG_ASYNC_CORE=m
CONFIG_ASYNC_MEMCPY=m
CONFIG_ASYNC_XOR=m
CONFIG_ASYNC_PQ=m
CONFIG_ASYNC_RAID6_RECOV=m
CONFIG_CRYPTO=y

#
# Crypto core or helper
#
# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
CONFIG_CRYPTO_GF128MUL=y
# CONFIG_CRYPTO_NULL is not set
CONFIG_CRYPTO_PCRYPT=m
CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_AUTHENC=y
CONFIG_CRYPTO_TEST=m

#
# Authenticated Encryption with Associated Data
#
CONFIG_CRYPTO_CCM=y
# CONFIG_CRYPTO_GCM is not set
CONFIG_CRYPTO_SEQIV=y

#
# Block modes
#
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_CTR=y
CONFIG_CRYPTO_CTS=m
CONFIG_CRYPTO_ECB=y
CONFIG_CRYPTO_LRW=y
CONFIG_CRYPTO_PCBC=y
# CONFIG_CRYPTO_XTS is not set

#
# Hash modes
#
CONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_XCBC is not set
CONFIG_CRYPTO_VMAC=m

#
# Digest
#
CONFIG_CRYPTO_CRC32C=y
CONFIG_CRYPTO_CRC32C_INTEL=y
CONFIG_CRYPTO_GHASH=m
CONFIG_CRYPTO_MD4=y
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=y
CONFIG_CRYPTO_RMD128=m
CONFIG_CRYPTO_RMD160=y
CONFIG_CRYPTO_RMD256=m
CONFIG_CRYPTO_RMD320=m
CONFIG_CRYPTO_SHA1=y
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
CONFIG_CRYPTO_TGR192=y
CONFIG_CRYPTO_WP512=m
# CONFIG_CRYPTO_GHASH_CLMUL_NI_INTEL is not set

#
# Ciphers
#
CONFIG_CRYPTO_AES=y
CONFIG_CRYPTO_AES_X86_64=y
# CONFIG_CRYPTO_AES_NI_INTEL is not set
CONFIG_CRYPTO_ANUBIS=m
CONFIG_CRYPTO_ARC4=y
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_CAMELLIA is not set
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=y
CONFIG_CRYPTO_DES=y
CONFIG_CRYPTO_FCRYPT=y
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_SALSA20=y
# CONFIG_CRYPTO_SALSA20_X86_64 is not set
CONFIG_CRYPTO_SEED=y
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_TEA=m
# CONFIG_CRYPTO_TWOFISH is not set
CONFIG_CRYPTO_TWOFISH_COMMON=m
CONFIG_CRYPTO_TWOFISH_X86_64=m

#
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
CONFIG_CRYPTO_ZLIB=m
CONFIG_CRYPTO_LZO=y

#
# Random Number Generation
#
CONFIG_CRYPTO_ANSI_CPRNG=y
CONFIG_CRYPTO_HW=y
CONFIG_CRYPTO_DEV_PADLOCK=y
# CONFIG_CRYPTO_DEV_PADLOCK_AES is not set
# CONFIG_CRYPTO_DEV_PADLOCK_SHA is not set
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
CONFIG_HAVE_KVM=y
CONFIG_HAVE_KVM_IRQCHIP=y
CONFIG_HAVE_KVM_EVENTFD=y
CONFIG_KVM_APIC_ARCHITECTURE=y
CONFIG_KVM_MMIO=y
CONFIG_VIRTUALIZATION=y
CONFIG_KVM=y
# CONFIG_KVM_INTEL is not set
CONFIG_KVM_AMD=m
# CONFIG_VHOST_NET is not set
CONFIG_VIRTIO=y
CONFIG_VIRTIO_RING=y
CONFIG_VIRTIO_PCI=y
CONFIG_VIRTIO_BALLOON=m
# CONFIG_BINARY_PRINTF is not set

#
# Library routines
#
CONFIG_BITREVERSE=y
CONFIG_GENERIC_FIND_FIRST_BIT=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_FIND_LAST_BIT=y
CONFIG_CRC_CCITT=y
CONFIG_CRC16=m
CONFIG_CRC_T10DIF=y
CONFIG_CRC_ITU_T=y
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=y
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_GENERIC_ALLOCATOR=y
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=m
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_CHECK_SIGNATURE=y
CONFIG_NLATTR=y
CONFIG_LRU_CACHE=m
CONFIG_FORCE_SUCCESSFUL_BUILD=y
CONFIG_FORCE_MINIMAL_CONFIG=y
CONFIG_FORCE_MINIMAL_CONFIG_64=y
CONFIG_FORCE_MINIMAL_CONFIG_PHYS=y

[-- Attachment #3: crash.log --]
[-- Type: text/plain, Size: 58054 bytes --]

[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 2.6.35-rc3-tip+ (mingo@sirius) (gcc version 4.4.4 20100514 (Red Hat 4.4.4-3) (GCC) ) #13762 SMP Tue Jun 29 12:52:12 CEST 2010
[    0.000000] Command line: root=/dev/sda6 earlyprintk=ttyS0,115200 console=ttyS0,115200 debug initcall_debug sysrq_always_enabled ignore_loglevel selinux=0 nmi_watchdog=0 panic=1 3
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[    0.000000]  BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)
[    0.000000]  BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS)
[    0.000000]  BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data)
[    0.000000]  BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[    0.000000] bootconsole [earlyser0] enabled
[    0.000000] debug: ignoring loglevel setting.
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
[    0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[    0.000000] last_pfn = 0x3fff0 max_arch_pfn = 0x400000000
[    0.000000] e820 update range: 0000000000001000 - 0000000000010000 (usable) ==> (reserved)
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] modified physical RAM map:
[    0.000000]  modified: 0000000000000000 - 0000000000010000 (reserved)
[    0.000000]  modified: 0000000000010000 - 000000000009f800 (usable)
[    0.000000]  modified: 000000000009f800 - 00000000000a0000 (reserved)
[    0.000000]  modified: 00000000000f0000 - 0000000000100000 (reserved)
[    0.000000]  modified: 0000000000100000 - 000000003fff0000 (usable)
[    0.000000]  modified: 000000003fff0000 - 000000003fff3000 (ACPI NVS)
[    0.000000]  modified: 000000003fff3000 - 0000000040000000 (ACPI data)
[    0.000000]  modified: 00000000e0000000 - 00000000f0000000 (reserved)
[    0.000000]  modified: 00000000fec00000 - 0000000100000000 (reserved)
[    0.000000] initial memory mapped : 0 - 20000000
[    0.000000] found SMP MP-table at [ffff8800000f5680] f5680
[    0.000000] init_memory_mapping: 0000000000000000-000000003fff0000
[    0.000000]  0000000000 - 003fe00000 page 2M
[    0.000000]  003fe00000 - 003fff0000 page 4k
[    0.000000] kernel direct mapping tables up to 3fff0000 @ 16000-19000
[    0.000000] ACPI: RSDP 00000000000f76f0 00014 (v00 Nvidia)
[    0.000000] ACPI: RSDT 000000003fff3040 00034 (v01 Nvidia AWRDACPI 42302E31 AWRD 00000000)
[    0.000000] ACPI: FACP 000000003fff30c0 00074 (v01 Nvidia AWRDACPI 42302E31 AWRD 00000000)
[    0.000000] ACPI: DSDT 000000003fff3180 06264 (v01 NVIDIA AWRDACPI 00001000 MSFT 0100000E)
[    0.000000] ACPI: FACS 000000003fff0000 00040
[    0.000000] ACPI: SRAT 000000003fff9500 000A0 (v01 AMD    HAMMER   00000001 AMD  00000001)
[    0.000000] ACPI: MCFG 000000003fff9600 0003C (v01 Nvidia AWRDACPI 42302E31 AWRD 00000000)
[    0.000000] ACPI: APIC 000000003fff9440 0007C (v01 Nvidia AWRDACPI 42302E31 AWRD 00000000)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] SRAT: PXM 0 -> APIC 0x00 -> Node 0
[    0.000000] SRAT: PXM 0 -> APIC 0x01 -> Node 0
[    0.000000] SRAT: Node 0 PXM 0 0-a0000
[    0.000000] SRAT: Node 0 PXM 0 100000-40000000
[    0.000000] SRAT: Node 0 [0,a0000) + [100000,40000000) -> [0,40000000)
[    0.000000] NUMA: Using 63 for the hash shift.
[    0.000000] Initmem setup node 0 0000000000000000-000000003fff0000
[    0.000000]   NODE_DATA [0000000002225700 - 00000000022346ff]
[    0.000000]   bootmap [0000000002235000 -  000000000223cfff] pages 8
[    0.000000] (11/32 early reservations) ==> bootmem [0000000000 - 003fff0000]
[    0.000000]   #0 [0001000000 - 00022256f8]    TEXT DATA BSS ==> [0001000000 - 00022256f8]
[    0.000000]   #1 [00000f5690 - 0000100000]    BIOS reserved ==> [00000f5690 - 0000100000]
[    0.000000]   #2 [00000f5680 - 00000f5690]     MP-table mpf ==> [00000f5680 - 00000f5690]
[    0.000000]   #3 [000009f800 - 00000f1400]    BIOS reserved ==> [000009f800 - 00000f1400]
[    0.000000]   #4 [00000f152c - 00000f5680]    BIOS reserved ==> [00000f152c - 00000f5680]
[    0.000000]   #5 [00000f1400 - 00000f152c]     MP-table mpc ==> [00000f1400 - 00000f152c]
[    0.000000]   #6 [0000010000 - 0000012000]       TRAMPOLINE ==> [0000010000 - 0000012000]
[    0.000000]   #7 [0000012000 - 0000016000]      ACPI WAKEUP ==> [0000012000 - 0000016000]
[    0.000000]   #8 [0000016000 - 0000017000]          PGTABLE ==> [0000016000 - 0000017000]
[    0.000000]   #9 [0002225700 - 0002234700]        NODE_DATA ==> [0002225700 - 0002234700]
[    0.000000]   #10 [0002235000 - 000223d000]          BOOTMAP ==> [0002235000 - 000223d000]
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000010 -> 0x00001000
[    0.000000]   DMA32    0x00001000 -> 0x00100000
[    0.000000]   Normal   empty
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[2] active PFN ranges
[    0.000000]     0: 0x00000010 -> 0x0000009f
[    0.000000]     0: 0x00000100 -> 0x0003fff0
[    0.000000] On node 0 totalpages: 262015
[    0.000000]   DMA zone: 56 pages used for memmap
[    0.000000]   DMA zone: 102 pages reserved
[    0.000000]   DMA zone: 3825 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 3528 pages used for memmap
[    0.000000]   DMA32 zone: 254504 pages, LIFO batch:31
[    0.000000] Nvidia board detected. Ignoring ACPI timer override.
[    0.000000] If you got timer trouble try acpi_use_timer_override
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: BIOS IRQ0 pin2 override ignored.
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] ACPI: IRQ14 used by override.
[    0.000000] ACPI: IRQ15 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[    0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[    0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000:a0000000)
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
[    0.000000] PERCPU: Embedded 26 pages/cpu @ffff880002400000 s77712 r8192 d20592 u1048576
[    0.000000] pcpu-alloc: s77712 r8192 d20592 u1048576 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 258329
[    0.000000] Policy zone: DMA32
[    0.000000] Kernel command line: root=/dev/sda6 earlyprintk=ttyS0,115200 console=ttyS0,115200 debug initcall_debug sysrq_always_enabled ignore_loglevel selinux=0 nmi_watchdog=0 panic=1 3
[    0.000000] sysrq: sysrq always enabled.
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 1014752k/1048512k available (10627k kernel code, 452k absent, 33308k reserved, 5776k data, 580k init)
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU debugfs-based tracing is enabled.
[    0.000000] 	Hierarchical RCU autobalancing is disabled.
[    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] 	RCU-based detection of stalled CPUs is disabled.
[    0.000000] 	Verbose stalled-CPUs detection is disabled.
[    0.000000] NR_IRQS:4352 nr_irqs:512
[    0.000000] spurious 8259A interrupt: IRQ7.
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [ttyS0] enabled, bootconsole disabled
[    0.000000] console [ttyS0] enabled, bootconsole disabled
[    0.000000] Fast TSC calibration using PIT
[    0.000000] Detected 2010.441 MHz processor.
[    0.010006] Calibrating delay loop (skipped), value calculated using timer frequency.. 4022.41 BogoMIPS (lpj=6701470)
[    0.016668] pid_max: default: 32768 minimum: 301
[    0.020013] Security Framework initialized
[    0.023443] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.027360] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
[    0.030333] Mount-cache hash table entries: 256
[    0.036808] Initializing cgroup subsys debug
[    0.040003] Initializing cgroup subsys cpuacct
[    0.043338] Initializing cgroup subsys devices
[    0.046669] Initializing cgroup subsys freezer
[    0.050002] Initializing cgroup subsys net_cls
[    0.053354] tseg: 0000000000
[    0.056683] CPU: Physical Processor ID: 0
[    0.060001] CPU: Processor Core ID: 0
[    0.063336] Performance Events: AMD PMU driver.
[    0.070004] ... version:                0
[    0.073335] ... bit width:              48
[    0.076668] ... generic registers:      4
[    0.080001] ... value mask:             0000ffffffffffff
[    0.083335] ... max period:             00007fffffffffff
[    0.086668] ... fixed-purpose events:   0
[    0.090001] ... event mask:             000000000000000f
[    0.096917] ACPI: Core revision 20100428
[    0.113403] Setting APIC routing to flat
[    0.116974] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1
[    0.154562] CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ stepping 02
[    0.263352] calling  migration_init+0x0/0x71 @ 1
[    0.266671] initcall migration_init+0x0/0x71 returned 0 after 0 usecs
[    0.270002] calling  spawn_ksoftirqd+0x0/0x57 @ 1
[    0.273357] initcall spawn_ksoftirqd+0x0/0x57 returned 0 after 0 usecs
[    0.276671] calling  init_call_single_data+0x0/0x8a @ 1
[    0.280005] initcall init_call_single_data+0x0/0x8a returned 0 after 0 usecs
[    0.283336] calling  cpu_stop_init+0x0/0xaf @ 1
[    0.286693] initcall cpu_stop_init+0x0/0xaf returned 0 after 0 usecs
[    0.290002] calling  relay_init+0x0/0x14 @ 1
[    0.293335] initcall relay_init+0x0/0x14 returned 0 after 0 usecs
[    0.296739] Booting Node   0, Processors  #1 Ok.
[    0.396770] Brought up 2 CPUs
[    0.399737] Total of 2 processors activated (8044.27 BogoMIPS).
[    0.400150] devtmpfs: initialized
[    0.403487] calling  init_mmap_min_addr+0x0/0x16 @ 1
[    0.406669] initcall init_mmap_min_addr+0x0/0x16 returned 0 after 0 usecs
[    0.410003] calling  init_cpufreq_transition_notifier_list+0x0/0x1b @ 1
[    0.413337] initcall init_cpufreq_transition_notifier_list+0x0/0x1b returned 0 after 0 usecs
[    0.416669] calling  net_ns_init+0x0/0x1a2 @ 1
[    0.420004] initcall net_ns_init+0x0/0x1a2 returned 0 after 0 usecs
[    0.423337] calling  e820_mark_nvs_memory+0x0/0x41 @ 1
[    0.426670] initcall e820_mark_nvs_memory+0x0/0x41 returned 0 after 0 usecs
[    0.430003] calling  cpufreq_tsc+0x0/0x28 @ 1
[    0.433336] initcall cpufreq_tsc+0x0/0x28 returned 0 after 0 usecs
[    0.436669] calling  pci_reboot_init+0x0/0x8 @ 1
[    0.440002] initcall pci_reboot_init+0x0/0x8 returned 0 after 0 usecs
[    0.443335] calling  init_lapic_sysfs+0x0/0x2d @ 1
[    0.446679] initcall init_lapic_sysfs+0x0/0x2d returned 0 after 0 usecs
[    0.450002] calling  init_smp_flush+0x0/0x2d @ 1
[    0.453336] initcall init_smp_flush+0x0/0x2d returned 0 after 0 usecs
[    0.456669] calling  alloc_frozen_cpus+0x0/0x10 @ 1
[    0.460002] initcall alloc_frozen_cpus+0x0/0x10 returned 0 after 0 usecs
[    0.463335] calling  sysctl_init+0x0/0x16 @ 1
[    0.466672] initcall sysctl_init+0x0/0x16 returned 0 after 0 usecs
[    0.470001] calling  ksysfs_init+0x0/0x94 @ 1
[    0.473339] initcall ksysfs_init+0x0/0x94 returned 0 after 0 usecs
[    0.476668] calling  async_init+0x0/0x60 @ 1
[    0.480018] initcall async_init+0x0/0x60 returned 0 after 0 usecs
[    0.483336] calling  init_jiffies_clocksource+0x0/0x12 @ 1
[    0.486671] initcall init_jiffies_clocksource+0x0/0x12 returned 0 after 0 usecs
[    0.490002] calling  pm_init+0x0/0x60 @ 1
[    0.493350] initcall pm_init+0x0/0x60 returned 0 after 0 usecs
[    0.496669] calling  pm_disk_init+0x0/0x19 @ 1
[    0.500004] initcall pm_disk_init+0x0/0x19 returned 0 after 0 usecs
[    0.503337] calling  swsusp_header_init+0x0/0x30 @ 1
[    0.506669] initcall swsusp_header_init+0x0/0x30 returned 0 after 0 usecs
[    0.510002] calling  init_hw_breakpoint+0x0/0xe4 @ 1
[    0.513338] initcall init_hw_breakpoint+0x0/0xe4 returned 0 after 0 usecs
[    0.516669] calling  init_zero_pfn+0x0/0x9a @ 1
[    0.520003] initcall init_zero_pfn+0x0/0x9a returned 0 after 0 usecs
[    0.523336] calling  filelock_init+0x0/0x2e @ 1
[    0.526669] initcall filelock_init+0x0/0x2e returned 0 after 0 usecs
[    0.530002] calling  init_script_binfmt+0x0/0x14 @ 1
[    0.533336] initcall init_script_binfmt+0x0/0x14 returned 0 after 0 usecs
[    0.536669] calling  init_elf_binfmt+0x0/0x14 @ 1
[    0.540003] initcall init_elf_binfmt+0x0/0x14 returned 0 after 0 usecs
[    0.543336] calling  init_compat_elf_binfmt+0x0/0x14 @ 1
[    0.546669] initcall init_compat_elf_binfmt+0x0/0x14 returned 0 after 0 usecs
[    0.550002] calling  debugfs_init+0x0/0x5c @ 1
[    0.553338] initcall debugfs_init+0x0/0x5c returned 0 after 0 usecs
[    0.556668] calling  securityfs_init+0x0/0x53 @ 1
[    0.560004] initcall securityfs_init+0x0/0x53 returned 0 after 0 usecs
[    0.563336] calling  random32_init+0x0/0xd9 @ 1
[    0.566669] initcall random32_init+0x0/0xd9 returned 0 after 0 usecs
[    0.570002] calling  test_atomic64+0x0/0x453 @ 1
[    0.573336] atomic64 test passed for x86-64 platform with CX8 and with SSE
[    0.576669] initcall test_atomic64+0x0/0x453 returned 0 after 3255 usecs
[    0.580002] calling  sfi_sysfs_init+0x0/0xdb @ 1
[    0.583335] initcall sfi_sysfs_init+0x0/0xdb returned 0 after 0 usecs
[    0.586670] calling  virtio_init+0x0/0x30 @ 1
[    0.590013] initcall virtio_init+0x0/0x30 returned 0 after 0 usecs
[    0.593335] calling  regulator_init+0x0/0x3f @ 1
[    0.596668] regulator: core version 0.5
[    0.600046] regulator: dummy: 
[    0.603336] initcall regulator_init+0x0/0x3f returned 0 after 6510 usecs
[    0.606669] calling  cpufreq_core_init+0x0/0xa4 @ 1
[    0.610004] initcall cpufreq_core_init+0x0/0xa4 returned 0 after 0 usecs
[    0.613335] calling  cpuidle_init+0x0/0x40 @ 1
[    0.616672] initcall cpuidle_init+0x0/0x40 returned 0 after 0 usecs
[    0.620002] calling  sock_init+0x0/0x5e @ 1
[    0.623358] initcall sock_init+0x0/0x5e returned 0 after 0 usecs
[    0.626669] calling  netpoll_init+0x0/0x31 @ 1
[    0.630003] initcall netpoll_init+0x0/0x31 returned 0 after 0 usecs
[    0.633336] calling  netlink_proto_init+0x0/0x14e @ 1
[    0.636675] NET: Registered protocol family 16
[    0.640014] initcall netlink_proto_init+0x0/0x14e returned 0 after 3255 usecs
[    0.643336] calling  bdi_class_init+0x0/0x4d @ 1
[    0.646688] initcall bdi_class_init+0x0/0x4d returned 0 after 0 usecs
[    0.650002] calling  kobject_uevent_init+0x0/0x21 @ 1
[    0.653340] initcall kobject_uevent_init+0x0/0x21 returned 0 after 0 usecs
[    0.656669] calling  gpiolib_sysfs_init+0x0/0xa1 @ 1
[    0.660017] initcall gpiolib_sysfs_init+0x0/0xa1 returned 0 after 0 usecs
[    0.663335] calling  pcibus_class_init+0x0/0x19 @ 1
[    0.666675] initcall pcibus_class_init+0x0/0x19 returned 0 after 0 usecs
[    0.670002] calling  pci_driver_init+0x0/0x12 @ 1
[    0.673354] initcall pci_driver_init+0x0/0x12 returned 0 after 0 usecs
[    0.676669] calling  lcd_class_init+0x0/0x4d @ 1
[    0.680012] initcall lcd_class_init+0x0/0x4d returned 0 after 0 usecs
[    0.683336] calling  backlight_class_init+0x0/0x5d @ 1
[    0.686675] initcall backlight_class_init+0x0/0x5d returned 0 after 0 usecs
[    0.690002] calling  tty_class_init+0x0/0x38 @ 1
[    0.693341] initcall tty_class_init+0x0/0x38 returned 0 after 0 usecs
[    0.696669] calling  vtconsole_class_init+0x0/0xc2 @ 1
[    0.700023] initcall vtconsole_class_init+0x0/0xc2 returned 0 after 0 usecs
[    0.703336] calling  register_node_type+0x0/0x12 @ 1
[    0.706677] initcall register_node_type+0x0/0x12 returned 0 after 0 usecs
[    0.710002] calling  i2c_init+0x0/0x70 @ 1
[    0.713365] i2c-core: driver [dummy] registered
[    0.716669] initcall i2c_init+0x0/0x70 returned 0 after 3255 usecs
[    0.720002] calling  amd_postcore_init+0x0/0x76 @ 1
[    0.723340] node 0 link 0: io port [1000, fffff]
[    0.726669] TOM: 0000000040000000 aka 1024M
[    0.730002] node 0 link 0: mmio [e0000000, efffffff]
[    0.736668] node 0 link 0: mmio [feb00000, fec0ffff]
[    0.740191] node 0 link 0: mmio [a0000, bffff]
[    0.743524] node 0 link 0: mmio [40000000, fed3ffff]
[    0.746857] bus: [00, ff] on node 0 link 0
[    0.750002] bus: 00 index 0 [io  0x0000-0xffff]
[    0.753335] bus: 00 index 1 [mem 0x40000000-0xfcffffffff]
[    0.756668] bus: 00 index 2 [mem 0xfeb00000-0xfec0ffff]
[    0.760001] bus: 00 index 3 [mem 0x000a0000-0x000bffff]
[    0.763336] initcall amd_postcore_init+0x0/0x76 returned 0 after 39062 usecs
[    0.766669] calling  arch_kdebugfs_init+0x0/0x24 @ 1
[    0.770006] initcall arch_kdebugfs_init+0x0/0x24 returned 0 after 0 usecs
[    0.773335] calling  ffh_cstate_init+0x0/0x2a @ 1
[    0.776669] initcall ffh_cstate_init+0x0/0x2a returned -1 after 0 usecs
[    0.780002] initcall ffh_cstate_init+0x0/0x2a returned with error code -1 
[    0.783335] calling  acpi_pci_init+0x0/0x5c @ 1
[    0.786668] ACPI: bus type pci registered
[    0.790003] initcall acpi_pci_init+0x0/0x5c returned 0 after 3255 usecs
[    0.793336] calling  pci_arch_init+0x0/0x5b @ 1
[    0.796908] PCI: Using configuration type 1 for base access
[    0.800002] initcall pci_arch_init+0x0/0x5b returned 0 after 3255 usecs
[    0.803336] calling  topology_init+0x0/0x98 @ 1
[    0.806696] initcall topology_init+0x0/0x98 returned 0 after 0 usecs
[    0.810002] calling  param_sysfs_init+0x0/0x240 @ 1
[    0.817046] initcall param_sysfs_init+0x0/0x240 returned 0 after 3255 usecs
[    0.820003] calling  pm_sysrq_init+0x0/0x20 @ 1
[    0.823336] initcall pm_sysrq_init+0x0/0x20 returned 0 after 0 usecs
[    0.826669] calling  init_slow_work+0x0/0x75 @ 1
[    0.830009] initcall init_slow_work+0x0/0x75 returned 0 after 0 usecs
[    0.833336] calling  default_bdi_init+0x0/0xb1 @ 1
[    0.836733] initcall default_bdi_init+0x0/0xb1 returned 0 after 0 usecs
[    0.840002] calling  init_bio+0x0/0xd8 @ 1
[    0.843362] bio: create slab <bio-0> at 0
[    0.846677] initcall init_bio+0x0/0xd8 returned 0 after 3255 usecs
[    0.850002] calling  fsnotify_init+0x0/0x12 @ 1
[    0.853337] initcall fsnotify_init+0x0/0x12 returned 0 after 0 usecs
[    0.856669] calling  fsnotify_notification_init+0x0/0xf0 @ 1
[    0.860003] initcall fsnotify_notification_init+0x0/0xf0 returned 0 after 0 usecs
[    0.863335] calling  cryptomgr_init+0x0/0x12 @ 1
[    0.866669] initcall cryptomgr_init+0x0/0x12 returned 0 after 0 usecs
[    0.870002] calling  blk_settings_init+0x0/0x2c @ 1
[    0.873336] initcall blk_settings_init+0x0/0x2c returned 0 after 0 usecs
[    0.876668] calling  blk_ioc_init+0x0/0x2a @ 1
[    0.880002] initcall blk_ioc_init+0x0/0x2a returned 0 after 0 usecs
[    0.883335] calling  blk_softirq_init+0x0/0x6e @ 1
[    0.886670] initcall blk_softirq_init+0x0/0x6e returned 0 after 0 usecs
[    0.890002] calling  blk_iopoll_setup+0x0/0x6e @ 1
[    0.893336] initcall blk_iopoll_setup+0x0/0x6e returned 0 after 0 usecs
[    0.896669] calling  genhd_device_init+0x0/0x67 @ 1
[    0.900021] initcall genhd_device_init+0x0/0x67 returned 0 after 0 usecs
[    0.903336] calling  blk_dev_integrity_init+0x0/0x2a @ 1
[    0.906669] initcall blk_dev_integrity_init+0x0/0x2a returned 0 after 0 usecs
[    0.910002] calling  gpiolib_debugfs_init+0x0/0x24 @ 1
[    0.913340] initcall gpiolib_debugfs_init+0x0/0x24 returned 0 after 0 usecs
[    0.916669] calling  pci_slot_init+0x0/0x50 @ 1
[    0.920004] initcall pci_slot_init+0x0/0x50 returned 0 after 0 usecs
[    0.923335] calling  fbmem_init+0x0/0x98 @ 1
[    0.930013] initcall fbmem_init+0x0/0x98 returned 0 after 3255 usecs
[    0.933336] calling  acpi_init+0x0/0x110 @ 1
[    0.938382] ACPI: EC: Look up EC in DSDT
[    0.957513] ACPI: Interpreter enabled
[    0.960001] ACPI: (supports S0 S1 S3 S4 S5)
[    0.964766] ACPI: Using IOAPIC for interrupt routing
[    0.985421] initcall acpi_init+0x0/0x110 returned 0 after 45572 usecs
[    0.986674] calling  acpi_pci_root_init+0x0/0x2d @ 1
[    0.990002] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.993544] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.997063] pci_root PNP0A08:00: host bridge window [io  0x0000-0x0cf7]
[    1.000002] pci_root PNP0A08:00: host bridge window [io  0x0d00-0xffff]
[    1.003335] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[    1.006668] pci_root PNP0A08:00: host bridge window [mem 0x000c0000-0x000dffff]
[    1.010006] pci_root PNP0A08:00: host bridge window [mem 0x40000000-0xfebfffff]
[    1.013415] pci 0000:00:01.1: reg 10: [io  0xdc00-0xdc1f]
[    1.016674] pci 0000:00:01.1: reg 20: [io  0x4c00-0x4c3f]
[    1.020003] pci 0000:00:01.1: reg 24: [io  0x4c40-0x4c7f]
[    1.023342] pci 0000:00:01.1: PME# supported from D3hot D3cold
[    1.026669] pci 0000:00:01.1: PME# disabled
[    1.030017] pci 0000:00:02.0: reg 10: [mem 0xda102000-0xda102fff]
[    1.033348] pci 0000:00:02.0: supports D1 D2
[    1.036668] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[    1.040002] pci 0000:00:02.0: PME# disabled
[    1.043349] pci 0000:00:02.1: reg 10: [mem 0xfeb00000-0xfeb000ff]
[    1.046685] pci 0000:00:02.1: supports D1 D2
[    1.050001] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
[    1.053335] pci 0000:00:02.1: PME# disabled
[    1.056685] pci 0000:00:04.0: reg 10: [io  0xd400-0xd4ff]
[    1.060003] pci 0000:00:04.0: reg 14: [io  0xd800-0xd8ff]
[    1.063336] pci 0000:00:04.0: reg 18: [mem 0xda101000-0xda101fff]
[    1.066679] pci 0000:00:04.0: supports D1 D2
[    1.070018] pci 0000:00:06.0: reg 20: [io  0xf000-0xf00f]
[    1.073367] pci 0000:00:0a.0: reg 10: [mem 0xda100000-0xda100fff]
[    1.076669] pci 0000:00:0a.0: reg 14: [io  0xd000-0xd007]
[    1.080013] pci 0000:00:0a.0: supports D1 D2
[    1.083334] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold
[    1.086668] pci 0000:00:0a.0: PME# disabled
[    1.090026] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
[    1.093335] pci 0000:00:0b.0: PME# disabled
[    1.096694] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
[    1.100002] pci 0000:00:0c.0: PME# disabled
[    1.103360] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
[    1.106668] pci 0000:00:0d.0: PME# disabled
[    1.110027] pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold
[    1.113335] pci 0000:00:0e.0: PME# disabled
[    1.116761] pci 0000:05:07.0: reg 10: [io  0xc000-0xc0ff]
[    1.120004] pci 0000:05:07.0: reg 14: [mem 0xda000000-0xda0000ff]
[    1.123357] pci 0000:05:07.0: supports D1 D2
[    1.126668] pci 0000:05:07.0: PME# supported from D1 D2 D3hot
[    1.130002] pci 0000:05:07.0: PME# disabled
[    1.133356] pci 0000:00:09.0: PCI bridge to [bus 05-05] (subtractive decode)
[    1.136669] pci 0000:00:09.0:   bridge window [io  0xc000-0xcfff]
[    1.140002] pci 0000:00:09.0:   bridge window [mem 0xda000000-0xda0fffff]
[    1.143336] pci 0000:00:09.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[    1.146669] pci 0000:00:09.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
[    1.150002] pci 0000:00:09.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
[    1.153335] pci 0000:00:09.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[    1.156669] pci 0000:00:09.0:   bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
[    1.160002] pci 0000:00:09.0:   bridge window [mem 0x40000000-0xfebfffff] (subtractive decode)
[    1.163352] pci 0000:00:0b.0: PCI bridge to [bus 04-04]
[    1.166669] pci 0000:00:0b.0:   bridge window [io  0xf000-0x0000] (disabled)
[    1.170002] pci 0000:00:0b.0:   bridge window [mem 0xfff00000-0x000fffff] (disabled)
[    1.173336] pci 0000:00:0b.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[    1.176685] pci 0000:00:0c.0: PCI bridge to [bus 03-03]
[    1.180002] pci 0000:00:0c.0:   bridge window [io  0xf000-0x0000] (disabled)
[    1.183335] pci 0000:00:0c.0:   bridge window [mem 0xfff00000-0x000fffff] (disabled)
[    1.186669] pci 0000:00:0c.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[    1.190018] pci 0000:00:0d.0: PCI bridge to [bus 02-02]
[    1.193336] pci 0000:00:0d.0:   bridge window [io  0xf000-0x0000] (disabled)
[    1.196668] pci 0000:00:0d.0:   bridge window [mem 0xfff00000-0x000fffff] (disabled)
[    1.200002] pci 0000:00:0d.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[    1.203363] pci 0000:01:00.0: reg 10: [mem 0xd0000000-0xd7ffffff pref]
[    1.206670] pci 0000:01:00.0: reg 14: [io  0xb000-0xb0ff]
[    1.210004] pci 0000:01:00.0: reg 18: [mem 0xd9000000-0xd900ffff]
[    1.213344] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[    1.216680] pci 0000:01:00.0: supports D1 D2
[    1.220019] pci 0000:01:00.1: reg 10: [mem 0xd9010000-0xd901ffff]
[    1.223360] pci 0000:01:00.1: supports D1 D2
[    1.226676] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    1.230018] pci 0000:00:0e.0: PCI bridge to [bus 01-01]
[    1.233336] pci 0000:00:0e.0:   bridge window [io  0xb000-0xbfff]
[    1.236668] pci 0000:00:0e.0:   bridge window [mem 0xd8000000-0xd9ffffff]
[    1.240003] pci 0000:00:0e.0:   bridge window [mem 0xd0000000-0xd7ffffff 64bit pref]
[    1.243348] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    1.247068] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[    1.377799] initcall acpi_pci_root_init+0x0/0x2d returned 0 after 377604 usecs
[    1.380004] calling  acpi_pci_link_init+0x0/0x43 @ 1
[    1.386853] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[    1.395403] ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 7 9 10 *11 12 14 15)
[    1.399666] ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 *5 7 9 10 11 12 14 15)
[    1.403898] ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[    1.412446] ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[    1.417164] ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[    1.426829] ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[    1.435481] ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 5 7 9 10 *11 12 14 15)
[    1.439698] ACPI: PCI Interrupt Link [LACI] (IRQs *3 4 5 7 9 10 11 12 14 15)
[    1.443867] ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[    1.452335] ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[    1.457097] ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[    1.466503] ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[    1.471799] ACPI: PCI Interrupt Link [LSID] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[    1.480450] ACPI: PCI Interrupt Link [LFID] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[    1.489026] ACPI: PCI Interrupt Link [LPCA] (IRQs
[    1.486672] Clocksource tsc unstable (delta = 254461602 ns)
[    1.490001]  3 4 5 7 9 10 11 12 14 15) *0, disabled.
[    1.498140] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled.
[    1.505126] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0
[    1.510798] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0
[    1.514556] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled.
[    1.518666] ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled.
[    1.521993] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0, disabled.
[    1.526986] ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled.
[    1.533840] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0
[    1.541167] ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0
[    1.547559] ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0, disabled.
[    1.555199] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0, disabled.
[    1.562699] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0, disabled.
[    1.566935] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
[    1.573873] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0, disabled.
[    1.581890] ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0, disabled.
[    1.589438] ACPI: PCI Interrupt Link [APCP] (IRQs 20 21 22 23) *0, disabled.
[    1.593415] initcall acpi_pci_link_init+0x0/0x43 returned 0 after 205078 usecs
[    1.596670] calling  hest_init+0x0/0xb5 @ 1
[    1.600001] HEST: Table is not found!
[    1.603336] initcall hest_init+0x0/0xb5 returned -19 after 3255 usecs
[    1.606668] calling  pnp_init+0x0/0x12 @ 1
[    1.610017] initcall pnp_init+0x0/0x12 returned 0 after 0 usecs
[    1.613335] calling  max8660_init+0x0/0x14 @ 1
[    1.616687] i2c-core: driver [max8660] registered
[    1.620002] initcall max8660_init+0x0/0x14 returned 0 after 3255 usecs
[    1.623335] calling  tps_65023_init+0x0/0x14 @ 1
[    1.626697] i2c-core: driver [tps65023] registered
[    1.630002] initcall tps_65023_init+0x0/0x14 returned 0 after 3255 usecs
[    1.633335] calling  misc_init+0x0/0xba @ 1
[    1.636686] initcall misc_init+0x0/0xba returned 0 after 0 usecs
[    1.640002] calling  init_scsi+0x0/0x91 @ 1
[    1.643526] SCSI subsystem initialized
[    1.646670] initcall init_scsi+0x0/0x91 returned 0 after 3255 usecs
[    1.650002] calling  ata_init+0x0/0x4cb @ 1
[    1.653386] libata version 3.00 loaded.
[    1.656670] initcall ata_init+0x0/0x4cb returned 0 after 3255 usecs
[    1.660002] calling  phy_init+0x0/0x2e @ 1
[    1.663363] initcall phy_init+0x0/0x2e returned 0 after 0 usecs
[    1.666669] calling  init_pcmcia_cs+0x0/0x36 @ 1
[    1.670009] initcall init_pcmcia_cs+0x0/0x36 returned 0 after 0 usecs
[    1.673335] calling  usb_init+0x0/0x173 @ 1
[    1.676738] usbcore: registered new interface driver usbfs
[    1.680019] usbcore: registered new interface driver hub
[    1.683349] usbcore: registered new device driver usb
[    1.686669] initcall usb_init+0x0/0x173 returned 0 after 9765 usecs
[    1.690002] calling  serio_init+0x0/0x8f @ 1
[    1.693379] initcall serio_init+0x0/0x8f returned 0 after 0 usecs
[    1.696669] calling  gameport_init+0x0/0x8f @ 1
[    1.700027] initcall gameport_init+0x0/0x8f returned 0 after 0 usecs
[    1.703335] calling  input_init+0x0/0x13c @ 1
[    1.706682] initcall input_init+0x0/0x13c returned 0 after 0 usecs
[    1.710002] calling  power_supply_class_init+0x0/0x44 @ 1
[    1.713343] initcall power_supply_class_init+0x0/0x44 returned 0 after 0 usecs
[    1.716668] calling  hwmon_init+0x0/0x115 @ 1
[    1.720016] initcall hwmon_init+0x0/0x115 returned 0 after 0 usecs
[    1.723335] calling  thermal_init+0x0/0x3f @ 1
[    1.726676] initcall thermal_init+0x0/0x3f returned 0 after 0 usecs
[    1.730002] calling  leds_init+0x0/0x48 @ 1
[    1.733343] initcall leds_init+0x0/0x48 returned 0 after 0 usecs
[    1.736669] calling  init_soundcore+0x0/0x96 @ 1
[    1.740011] initcall init_soundcore+0x0/0x96 returned 0 after 0 usecs
[    1.743336] calling  pci_subsys_init+0x0/0x4f @ 1
[    1.746667] PCI: Using ACPI for IRQ routing
[    1.750004] PCI: pci_cache_line_size set to 64 bytes
[    1.753397] reserve RAM buffer: 000000000009f800 - 000000000009ffff 
[    1.756669] reserve RAM buffer: 000000003fff0000 - 000000003fffffff initcall pci_subsys_init+0x0/0x4f returned 0 after 13020 usecs
[    1.763335] calling  proto_init+0x0/0x12 @ 1
[    1.766672] initcall proto_init+0x0/0x12 returned 0 after 0 usecs
[    1.770002] calling  net_dev_init+0x0/0x1b1 @ 1
[    1.773459] initcall net_dev_init+0x0/0x1b1 returned 0 after 0 usecs
[    1.776669] calling  neigh_init+0x0/0x71 @ 1
[    1.780005] initcall neigh_init+0x0/0x71 returned 0 after 0 usecs
[    1.783335] calling  fib_rules_init+0x0/0xa6 @ 1
[    1.786670] initcall fib_rules_init+0x0/0xa6 returned 0 after 0 usecs
[    1.790002] calling  pktsched_init+0x0/0xed @ 1
[    1.793339] initcall pktsched_init+0x0/0xed returned 0 after 0 usecs
[    1.796669] calling  tc_filter_init+0x0/0x4c @ 1
[    1.800002] initcall tc_filter_init+0x0/0x4c returned 0 after 0 usecs
[    1.803335] calling  genl_init+0x0/0x8f @ 1
[    1.806681] initcall genl_init+0x0/0x8f returned 0 after 0 usecs
[    1.810002] calling  cipso_v4_init+0x0/0x64 @ 1
[    1.813338] initcall cipso_v4_init+0x0/0x64 returned 0 after 0 usecs
[    1.816669] calling  wanrouter_init+0x0/0x55 @ 1
[    1.820002] Sangoma WANPIPE Router v1.1 (c) 1995-2000 Sangoma Technologies Inc.
[    1.823338] initcall wanrouter_init+0x0/0x55 returned 0 after 3255 usecs
[    1.826669] calling  wireless_nlevent_init+0x0/0x12 @ 1
[    1.830002] initcall wireless_nlevent_init+0x0/0x12 returned 0 after 0 usecs
[    1.833335] calling  netlbl_init+0x0/0x81 @ 1
[    1.836667] NetLabel: Initializing
[    1.840001] NetLabel:  domain hash size = 128
[    1.843334] NetLabel:  protocols = UNLABELED CIPSOv4
[    1.846686] NetLabel:  unlabeled traffic allowed by default
[    1.850002] initcall netlbl_init+0x0/0x81 returned 0 after 13020 usecs
[    1.853335] calling  sysctl_init+0x0/0x48 @ 1
[    1.856669] initcall sysctl_init+0x0/0x48 returned 0 after 0 usecs
[    1.860003] calling  print_ICs+0x0/0x51e @ 1
[    1.863336] initcall print_ICs+0x0/0x51e returned 0 after 0 usecs
[    1.866669] calling  hpet_late_init+0x0/0xef @ 1
[    1.870003] initcall hpet_late_init+0x0/0xef returned -19 after 0 usecs
[    1.873335] calling  init_k8_nbs+0x0/0x28 @ 1
[    1.876695] initcall init_k8_nbs+0x0/0x28 returned 0 after 0 usecs
[    1.880002] calling  clocksource_done_booting+0x0/0x5a @ 1
[    1.883338] initcall clocksource_done_booting+0x0/0x5a returned 0 after 0 usecs
[    1.886670] calling  init_pipe_fs+0x0/0x4c @ 1
[    1.890014] initcall init_pipe_fs+0x0/0x4c returned 0 after 0 usecs
[    1.893336] calling  eventpoll_init+0x0/0xba @ 1
[    1.896670] initcall eventpoll_init+0x0/0xba returned 0 after 0 usecs
[    1.900002] calling  anon_inode_init+0x0/0x132 @ 1
[    1.903353] initcall anon_inode_init+0x0/0x132 returned 0 after 0 usecs
[    1.906669] calling  blk_scsi_ioctl_init+0x0/0x289 @ 1
[    1.910003] initcall blk_scsi_ioctl_init+0x0/0x289 returned 0 after 0 usecs
[    1.913336] calling  acpi_event_init+0x0/0x81 @ 1
[    1.916681] initcall acpi_event_init+0x0/0x81 returned 0 after 0 usecs
[    1.920002] calling  pnpacpi_init+0x0/0x8c @ 1
[    1.923334] pnp: PnP ACPI init
[    1.926677] ACPI: bus type pnp registered
[    1.942040] pnp: PnP ACPI: found 16 devices
[    1.943335] ACPI: ACPI bus type pnp unregistered
[    1.946670] initcall pnpacpi_init+0x0/0x8c returned 0 after 22786 usecs
[    1.950002] calling  pnp_system_init+0x0/0x12 @ 1
[    1.953346] system 00:01: [io  0x4000-0x407f] has been reserved
[    1.956669] system 00:01: [io  0x4080-0x40ff] has been reserved
[    1.960002] system 00:01: [io  0x4400-0x447f] has been reserved
[    1.963335] system 00:01: [io  0x4480-0x44ff] has been reserved
[    1.966669] system 00:01: [io  0x4800-0x487f] has been reserved
[    1.970002] system 00:01: [io  0x4880-0x48ff] has been reserved
[    1.973340] system 00:02: [io  0x04d0-0x04d1] has been reserved
[    1.976669] system 00:02: [io  0x0800-0x0805] has been reserved
[    1.980002] system 00:02: [io  0x0290-0x0297] has been reserved
[    1.983342] system 00:0e: [mem 0xe0000000-0xefffffff] has been reserved
[    1.986673] system 00:0f: [mem 0x000f0000-0x000f3fff] could not be reserved
[    1.990003] system 00:0f: [mem 0x000f4000-0x000f7fff] could not be reserved
[    1.993336] system 00:0f: [mem 0x000f8000-0x000fbfff] could not be reserved
[    1.996669] system 00:0f: [mem 0x000fc000-0x000fffff] could not be reserved
[    2.000002] system 00:0f: [mem 0x3fff0000-0x3fffffff] could not be reserved
[    2.003335] system 00:0f: [mem 0xffff0000-0xffffffff] has been reserved
[    2.006707] system 00:0f: [mem 0x00000000-0x0009ffff] could not be reserved
[    2.010003] system 00:0f: [mem 0x00100000-0x3ffeffff] could not be reserved
[    2.013338] system 00:0f: [mem 0xfec00000-0xfec00fff] could not be reserved
[    2.016696] system 00:0f: [mem 0xfee00000-0xfeefffff] has been reserved
[    2.020032] system 00:0f: [mem 0xfefff000-0xfeffffff] has been reserved
[    2.023336] system 00:0f: [mem 0xfff80000-0xfff80fff] has been reserved
[    2.026669] system 00:0f: [mem 0xfff90000-0xfffbffff] has been reserved
[    2.030002] system 00:0f: [mem 0xfffed000-0xfffeffff] has been reserved
[    2.033344] initcall pnp_system_init+0x0/0x12 returned 0 after 78125 usecs
[    2.036671] calling  chr_dev_init+0x0/0xd1 @ 1
[    2.040300] initcall chr_dev_init+0x0/0xd1 returned 0 after 0 usecs
[    2.043336] calling  firmware_class_init+0x0/0x19 @ 1
[    2.046677] initcall firmware_class_init+0x0/0x19 returned 0 after 0 usecs
[    2.050002] calling  ieee1394_init+0x0/0x263 @ 1
[    2.053397] initcall ieee1394_init+0x0/0x263 returned 0 after 0 usecs
[    2.056669] calling  init_pcmcia_bus+0x0/0x65 @ 1
[    2.060044] initcall init_pcmcia_bus+0x0/0x65 returned 0 after 0 usecs
[    2.063336] calling  cpufreq_gov_powersave_init+0x0/0x12 @ 1
[    2.066670] initcall cpufreq_gov_powersave_init+0x0/0x12 returned 0 after 0 usecs
[    2.070002] calling  pcibios_assign_resources+0x0/0x76 @ 1
[    2.073368] pci 0000:00:09.0: PCI bridge to [bus 05-05]
[    2.076669] pci 0000:00:09.0:   bridge window [io  0xc000-0xcfff]
[    2.080002] pci 0000:00:09.0:   bridge window [mem 0xda000000-0xda0fffff]
[    2.083335] pci 0000:00:09.0:   bridge window [mem pref disabled]
[    2.086669] pci 0000:00:0b.0: PCI bridge to [bus 04-04]
[    2.090001] pci 0000:00:0b.0:   bridge window [io  disabled]
[    2.093335] pci 0000:00:0b.0:   bridge window [mem disabled]
[    2.096668] pci 0000:00:0b.0:   bridge window [mem pref disabled]
[    2.100003] pci 0000:00:0c.0: PCI bridge to [bus 03-03]
[    2.103334] pci 0000:00:0c.0:   bridge window [io  disabled]
[    2.106668] pci 0000:00:0c.0:   bridge window [mem disabled]
[    2.110001] pci 0000:00:0c.0:   bridge window [mem pref disabled]
[    2.113336] pci 0000:00:0d.0: PCI bridge to [bus 02-02]
[    2.116667] pci 0000:00:0d.0:   bridge window [io  disabled]
[    2.120002] pci 0000:00:0d.0:   bridge window [mem disabled]
[    2.123335] pci 0000:00:0d.0:   bridge window [mem pref disabled]
[    2.126672] pci 0000:01:00.0: BAR 6: assigned [mem 0xd8000000-0xd801ffff pref]
[    2.130002] pci 0000:00:0e.0: PCI bridge to [bus 01-01]
[    2.133335] pci 0000:00:0e.0:   bridge window [io  0xb000-0xbfff]
[    2.136669] pci 0000:00:0e.0:   bridge window [mem 0xd8000000-0xd9ffffff]
[    2.140002] pci 0000:00:0e.0:   bridge window [mem 0xd0000000-0xd7ffffff 64bit pref]
[    2.143342] pci 0000:00:09.0: setting latency timer to 64
[    2.146671] pci 0000:00:0b.0: setting latency timer to 64
[    2.150004] pci 0000:00:0c.0: setting latency timer to 64
[    2.153337] pci 0000:00:0d.0: setting latency timer to 64
[    2.156671] pci 0000:00:0e.0: setting latency timer to 64
[    2.160002] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    2.163335] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    2.166668] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    2.170001] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
[    2.173335] pci_bus 0000:00: resource 8 [mem 0x40000000-0xfebfffff]
[    2.176668] pci_bus 0000:05: resource 0 [io  0xc000-0xcfff]
[    2.180001] pci_bus 0000:05: resource 1 [mem 0xda000000-0xda0fffff]
[    2.183335] pci_bus 0000:05: resource 4 [io  0x0000-0x0cf7]
[    2.186668] pci_bus 0000:05: resource 5 [io  0x0d00-0xffff]
[    2.190001] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff]
[    2.193335] pci_bus 0000:05: resource 7 [mem 0x000c0000-0x000dffff]
[    2.196668] pci_bus 0000:05: resource 8 [mem 0x40000000-0xfebfffff]
[    2.200002] pci_bus 0000:01: resource 0 [io  0xb000-0xbfff]
[    2.203335] pci_bus 0000:01: resource 1 [mem 0xd8000000-0xd9ffffff]
[    2.206668] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xd7ffffff 64bit pref]
[    2.210003] initcall pcibios_assign_resources+0x0/0x76 returned 0 after 133463 usecs
[    2.213336] calling  sysctl_core_init+0x0/0x38 @ 1
[    2.216676] initcall sysctl_core_init+0x0/0x38 returned 0 after 0 usecs
[    2.220002] calling  inet_init+0x0/0x23d @ 1
[    2.223343] NET: Registered protocol family 2
[    2.226727] IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
[    2.233492] ------------[ cut here ]------------
[    2.236671] WARNING: at mm/vmalloc.c:107 vmap_page_range_noflush+0x309/0x3a0()
[    2.240001] Modules linked in:
[    2.243533] Pid: 1, comm: swapper Not tainted 2.6.35-rc3-tip+ #13762
[    2.246668] Call Trace:
[    2.250005]  [<ffffffff8106207b>] warn_slowpath_common+0x6b/0xa0
[    2.253336]  [<ffffffff810620c5>] warn_slowpath_null+0x15/0x20
[    2.256669]  [<ffffffff810de1c9>] vmap_page_range_noflush+0x309/0x3a0
[    2.260003]  [<ffffffff810de28d>] map_vm_area+0x2d/0x50
[    2.263336]  [<ffffffff810de3c8>] __vmalloc_area_node+0x118/0x180
[    2.266669]  [<ffffffff810ec3fe>] ? slob_page_alloc+0x1ae/0x270
[    2.270004]  [<ffffffff820324ec>] ? alloc_large_system_hash+0x15e/0x222
[    2.273336]  [<ffffffff810de4d2>] __vmalloc_node+0xa2/0xb0
[    2.276669]  [<ffffffff820324ec>] ? alloc_large_system_hash+0x15e/0x222
[    2.280002]  [<ffffffff810de69d>] __vmalloc+0x1d/0x20
[    2.283336]  [<ffffffff820324ec>] alloc_large_system_hash+0x15e/0x222
[    2.286669]  [<ffffffff820558a5>] ? inet_init+0x0/0x23d
[    2.290003]  [<ffffffff82054d9e>] tcp_init+0xa8/0x3d9
[    2.293339]  [<ffffffff82055a12>] inet_init+0x16d/0x23d
[    2.296669]  [<ffffffff820558a5>] ? inet_init+0x0/0x23d
[    2.300003]  [<ffffffff810001df>] do_one_initcall+0x3f/0x190
[    2.303337]  [<ffffffff8201a71a>] kernel_init+0x161/0x1ea
[    2.306671]  [<ffffffff81025d04>] kernel_thread_helper+0x4/0x10
[    2.310003]  [<ffffffff8201a5b9>] ? kernel_init+0x0/0x1ea
[    2.313336]  [<ffffffff81025d00>] ? kernel_thread_helper+0x0/0x10
[    2.316671] ---[ end trace e93713a9d40cd06c ]---
[    2.320135] ------------[ cut here ]------------
[    2.323336] WARNING: at mm/vmalloc.c:107 vmap_page_range_noflush+0x309/0x3a0()
[    2.326667] Modules linked in:
[    2.330191] Pid: 1, comm: swapper Tainted: G        W   2.6.35-rc3-tip+ #13762
[    2.333334] Call Trace:
[    2.336669]  [<ffffffff8106207b>] warn_slowpath_common+0x6b/0xa0
[    2.340002]  [<ffffffff810620c5>] warn_slowpath_null+0x15/0x20
[    2.343336]  [<ffffffff810de1c9>] vmap_page_range_noflush+0x309/0x3a0
[    2.346669]  [<ffffffff810de28d>] map_vm_area+0x2d/0x50
[    2.350002]  [<ffffffff810de3c8>] __vmalloc_area_node+0x118/0x180
[    2.353335]  [<ffffffff810ec3fe>] ? slob_page_alloc+0x1ae/0x270
[    2.356669]  [<ffffffff820324ec>] ? alloc_large_system_hash+0x15e/0x222
[    2.360002]  [<ffffffff810de4d2>] __vmalloc_node+0xa2/0xb0
[    2.363336]  [<ffffffff820324ec>] ? alloc_large_system_hash+0x15e/0x222
[    2.366669]  [<ffffffff810de69d>] __vmalloc+0x1d/0x20
[    2.370002]  [<ffffffff820324ec>] alloc_large_system_hash+0x15e/0x222
[    2.373335]  [<ffffffff820558a5>] ? inet_init+0x0/0x23d
[    2.376669]  [<ffffffff82054d9e>] tcp_init+0xa8/0x3d9
[    2.380002]  [<ffffffff82055a12>] inet_init+0x16d/0x23d
[    2.383335]  [<ffffffff820558a5>] ? inet_init+0x0/0x23d
[    2.386669]  [<ffffffff810001df>] do_one_initcall+0x3f/0x190
[    2.390003]  [<ffffffff8201a71a>] kernel_init+0x161/0x1ea
[    2.393336]  [<ffffffff81025d04>] kernel_thread_helper+0x4/0x10
[    2.396669]  [<ffffffff8201a5b9>] ? kernel_init+0x0/0x1ea
[    2.400002]  [<ffffffff81025d00>] ? kernel_thread_helper+0x0/0x10
[    2.403335] ---[ end trace e93713a9d40cd06d ]---
[    2.406728] ------------[ cut here ]------------
[    2.410002] WARNING: at mm/vmalloc.c:107 vmap_page_range_noflush+0x309/0x3a0()
[    2.413334] Modules linked in:
[    2.416857] Pid: 1, comm: swapper Tainted: G        W   2.6.35-rc3-tip+ #13762
[    2.420001] Call Trace:
[    2.423336]  [<ffffffff8106207b>] warn_slowpath_common+0x6b/0xa0
[    2.426669]  [<ffffffff810620c5>] warn_slowpath_null+0x15/0x20
[    2.430002]  [<ffffffff810de1c9>] vmap_page_range_noflush+0x309/0x3a0
[    2.433336]  [<ffffffff810de28d>] map_vm_area+0x2d/0x50
[    2.436669]  [<ffffffff810de3c8>] __vmalloc_area_node+0x118/0x180
[    2.440002]  [<ffffffff810ec3fe>] ? slob_page_alloc+0x1ae/0x270
[    2.443336]  [<ffffffff820324ec>] ? alloc_large_system_hash+0x15e/0x222
[    2.446669]  [<ffffffff810de4d2>] __vmalloc_node+0xa2/0xb0
[    2.450003]  [<ffffffff820324ec>] ? alloc_large_system_hash+0x15e/0x222
[    2.453335]  [<ffffffff810de69d>] __vmalloc+0x1d/0x20
[    2.456669]  [<ffffffff820324ec>] alloc_large_system_hash+0x15e/0x222
[    2.460002]  [<ffffffff820558a5>] ? inet_init+0x0/0x23d
[    2.463336]  [<ffffffff82054d9e>] tcp_init+0xa8/0x3d9
[    2.466669]  [<ffffffff82055a12>] inet_init+0x16d/0x23d
[    2.470002]  [<ffffffff820558a5>] ? inet_init+0x0/0x23d
[    2.473336]  [<ffffffff810001df>] do_one_initcall+0x3f/0x190
[    2.476669]  [<ffffffff8201a71a>] kernel_init+0x161/0x1ea
[    2.480003]  [<ffffffff81025d04>] kernel_thread_helper+0x4/0x10
[    2.483336]  [<ffffffff8201a5b9>] ? kernel_init+0x0/0x1ea
[    2.486669]  [<ffffffff81025d00>] ? kernel_thread_helper+0x0/0x10
[    2.490001] ---[ end trace e93713a9d40cd06e ]---
[    2.493360] ------------[ cut here ]------------
[    2.496669] WARNING: at mm/vmalloc.c:107 vmap_page_range_noflush+0x309/0x3a0()
[    2.500000] Modules linked in:
[    2.503335] Pid: 1, comm: swapper Tainted: G        W   2.6.35-rc3-tip+ #13762
[    2.506667] Call Trace:
[    2.509117]  [<ffffffff8106207b>] warn_slowpath_common+0x6b/0xa0
[    2.510002]  [<ffffffff810620c5>] warn_slowpath_null+0x15/0x20
[    2.513336]  [<ffffffff810de1c9>] vmap_page_range_noflush+0x309/0x3a0
[    2.516669]  [<ffffffff810de28d>] map_vm_area+0x2d/0x50
[    2.520002]  [<ffffffff810de3c8>] __vmalloc_area_node+0x118/0x180
[    2.523335]  [<ffffffff810ec3fe>] ? slob_page_alloc+0x1ae/0x270
[    2.526669]  [<ffffffff820324ec>] ? alloc_large_system_hash+0x15e/0x222
[    2.530002]  [<ffffffff810de4d2>] __vmalloc_node+0xa2/0xb0
[    2.533336]  [<ffffffff820324ec>] ? alloc_large_system_hash+0x15e/0x222
[    2.536669]  [<ffffffff810de69d>] __vmalloc+0x1d/0x20
[    2.540002]  [<ffffffff820324ec>] alloc_large_system_hash+0x15e/0x222
[    2.543335]  [<ffffffff820558a5>] ? inet_init+0x0/0x23d
[    2.546669]  [<ffffffff82054d9e>] tcp_init+0xa8/0x3d9
[    2.550003]  [<ffffffff82055a12>] inet_init+0x16d/0x23d
[    2.553335]  [<ffffffff820558a5>] ? inet_init+0x0/0x23d
[    2.556669]  [<ffffffff810001df>] do_one_initcall+0x3f/0x190
[    2.560002]  [<ffffffff8201a71a>] kernel_init+0x161/0x1ea
[    2.563336]  [<ffffffff81025d04>] kernel_thread_helper+0x4/0x10
[    2.566669]  [<ffffffff8201a5b9>] ? kernel_init+0x0/0x1ea
[    2.570003]  [<ffffffff81025d00>] ? kernel_thread_helper+0x0/0x10
[    2.573334] ---[ end trace e93713a9d40cd06f ]---
[    2.576681] ------------[ cut here ]------------
[    2.580002] WARNING: at mm/vmalloc.c:107 vmap_page_range_noflush+0x309/0x3a0()
[    2.583334] Modules linked in:
[    2.586857] Pid: 1, comm: swapper Tainted: G        W   2.6.35-rc3-tip+ #13762
[    2.590001] Call Trace:
[    2.593336]  [<ffffffff8106207b>] warn_slowpath_common+0x6b/0xa0
[    2.596669]  [<ffffffff810620c5>] warn_slowpath_null+0x15/0x20
[    2.600002]  [<ffffffff810de1c9>] vmap_page_range_noflush+0x309/0x3a0
[    2.603336]  [<ffffffff810de28d>] map_vm_area+0x2d/0x50
[    2.606669]  [<ffffffff810de3c8>] __vmalloc_area_node+0x118/0x180
[    2.610002]  [<ffffffff810ec3fe>] ? slob_page_alloc+0x1ae/0x270
[    2.613336]  [<ffffffff820324ec>] ? alloc_large_system_hash+0x15e/0x222
[    2.616669]  [<ffffffff810de4d2>] __vmalloc_node+0xa2/0xb0
[    2.620002]  [<ffffffff820324ec>] ? alloc_large_system_hash+0x15e/0x222
[    2.623336]  [<ffffffff810de69d>] __vmalloc+0x1d/0x20
[    2.626669]  [<ffffffff820324ec>] alloc_large_system_hash+0x15e/0x222
[    2.630002]  [<ffffffff820558a5>] ? inet_init+0x0/0x23d
[    2.633336]  [<ffffffff82054d9e>] tcp_init+0xa8/0x3d9
[    2.636669]  [<ffffffff82055a12>] inet_init+0x16d/0x23d
[    2.640002]  [<ffffffff820558a5>] ? inet_init+0x0/0x23d
[    2.643336]  [<ffffffff810001df>] do_one_initcall+0x3f/0x190
[    2.646669]  [<ffffffff8201a71a>] kernel_init+0x161/0x1ea
[    2.650003]  [<ffffffff81025d04>] kernel_thread_helper+0x4/0x10
[    2.653336]  [<ffffffff8201a5b9>] ? kernel_init+0x0/0x1ea
[    2.656669]  [<ffffffff81025d00>] ? kernel_thread_helper+0x0/0x10
[    2.660001] ---[ end trace e93713a9d40cd070 ]---
[    2.663342] ------------[ cut here ]------------
[    2.666669] WARNING: at mm/vmalloc.c:107 vmap_page_range_noflush+0x309/0x3a0()
[    2.670001] Modules linked in:
[    2.673525] Pid: 1, comm: swapper Tainted: G        W   2.6.35-rc3-tip+ #13762
[    2.676667] Call Trace:
[    2.680002]  [<ffffffff8106207b>] warn_slowpath_common+0x6b/0xa0
[    2.683335]  [<ffffffff810620c5>] warn_slowpath_null+0x15/0x20
[    2.686669]  [<ffffffff810de1c9>] vmap_page_range_noflush+0x309/0x3a0
[    2.690003]  [<ffffffff810de28d>] map_vm_area+0x2d/0x50
[    2.693336]  [<ffffffff810de3c8>] __vmalloc_area_node+0x118/0x180
[    2.696669]  [<ffffffff810ec3fe>] ? slob_page_alloc+0x1ae/0x270
[    2.700003]  [<ffffffff820324ec>] ? alloc_large_system_hash+0x15e/0x222
[    2.703336]  [<ffffffff810de4d2>] __vmalloc_node+0xa2/0xb0
[    2.706669]  [<ffffffff820324ec>] ? alloc_large_system_hash+0x15e/0x222
[    2.710002]  [<ffffffff810de69d>] __vmalloc+0x1d/0x20
[    2.713336]  [<ffffffff820324ec>] alloc_large_system_hash+0x15e/0x222
[    2.716669]  [<ffffffff820558a5>] ? inet_init+0x0/0x23d
[    2.720003]  [<ffffffff82054d9e>] tcp_init+0xa8/0x3d9
[    2.723335]  [<ffffffff82055a12>] inet_init+0x16d/0x23d
[    2.726668]  [<ffffffff820558a5>] ? inet_init+0x0/0x23d
[    2.730002]  [<ffffffff810001df>] do_one_initcall+0x3f/0x190
[    2.733336]  [<ffffffff8201a71a>] kernel_init+0x161/0x1ea
[    2.736669]  [<ffffffff81025d04>] kernel_thread_helper+0x4/0x10
[    2.740002]  [<ffffffff8201a5b9>] ? kernel_init+0x0/0x1ea
[    2.743336]  [<ffffffff81025d00>] ? kernel_thread_helper+0x0/0x10
[    2.746668] ---[ end trace e93713a9d40cd071 ]---
[    2.750005] ------------[ cut here ]------------
[    2.753336] WARNING: at mm/vmalloc.c:107 vmap_page_range_noflush+0x309/0x3a0()
[    2.756667] Modules linked in:
[    2.760190] Pid: 1, comm: swapper Tainted: G        W   2.6.35-rc3-tip+ #13762
[    2.763334] Call Trace:
[    2.766669]  [<ffffffff8106207b>] warn_slowpath_common+0x6b/0xa0
[    2.770002]  [<ffffffff810620c5>] warn_slowpath_null+0x15/0x20
[    2.773335]  [<ffffffff810de1c9>] vmap_page_range_noflush+0x309/0x3a0
[    2.776669]  [<ffffffff810de28d>] map_vm_area+0x2d/0x50
[    2.780002]  [<ffffffff810de3c8>] __vmalloc_area_node+0x118/0x180
[    2.783335]  [<ffffffff810ec3fe>] ? slob_page_alloc+0x1ae/0x270
[    2.786669]  [<ffffffff820324ec>] ? alloc_large_system_hash+0x15e/0x222
[    2.790002]  [<ffffffff810de4d2>] __vmalloc_node+0xa2/0xb0
[    2.793336]  [<ffffffff820324ec>] ? alloc_large_system_hash+0x15e/0x222
[    2.796669]  [<ffffffff810de69d>] __vmalloc+0x1d/0x20
[    2.800002]  [<ffffffff820324ec>] alloc_large_system_hash+0x15e/0x222
[    2.803335]  [<ffffffff820558a5>] ? inet_init+0x0/0x23d
[    2.806670]  [<ffffffff82054d9e>] tcp_init+0xa8/0x3d9
[    2.810002]  [<ffffffff82055a12>] inet_init+0x16d/0x23d
[    2.813335]  [<ffffffff820558a5>] ? inet_init+0x0/0x23d
[    2.816669]  [<ffffffff810001df>] do_one_initcall+0x3f/0x190
[    2.820002]  [<ffffffff8201a71a>] kernel_init+0x161/0x1ea
[    2.823336]  [<ffffffff81025d04>] kernel_thread_helper+0x4/0x10
[    2.826669]  [<ffffffff8201a5b9>] ? kernel_init+0x0/0x1ea
[    2.830003]  [<ffffffff81025d00>] ? kernel_thread_helper+0x0/0x10
[    2.833334] ---[ end trace e93713a9d40cd072 ]---
[    2.836671] ------------[ cut here ]------------
[    2.840002] WARNING: at mm/vmalloc.c:107 vmap_page_range_noflush+0x309/0x3a0()
[    2.843334] Modules linked in:
[    2.846407] Pid: 1, comm: swapper Tainted: G        W   2.6.35-rc3-tip+ #13762
[    2.846667] Call Trace:
[    2.849117]  [<ffffffff8106207b>] warn_slowpath_common+0x6b/0xa0
[    2.850002]  [<ffffffff810620c5>] warn_slowpath_null+0x15/0x20
[    2.853335]  [<ffffffff810de1c9>] vmap_page_range_noflush+0x309/0x3a0
[    2.856669]  [<ffffffff810de28d>] map_vm_area+0x2d/0x50
[    2.860002]  [<ffffffff810de3c8>] __vmalloc_area_node+0x118/0x180
[    2.863335]  [<ffffffff810ec3fe>] ? slob_page_alloc+0x1ae/0x270
[    2.866669]  [<ffffffff820324ec>] ? alloc_large_system_hash+0x15e/0x222
[    2.870002]  [<ffffffff810de4d2>] __vmalloc_node+0xa2/0xb0
[    2.873336]  [<ffffffff820324ec>] ? alloc_large_system_hash+0x15e/0x222
[    2.876669]  [<ffffffff810de69d>] __vmalloc+0x1d/0x20
[    2.880002]  [<ffffffff820324ec>] alloc_large_system_hash+0x15e/0x222
[    2.883335]  [<ffffffff820558a5>] ? inet_init+0x0/0x23d
[    2.886669]  [<ffffffff82054d9e>] tcp_init+0xa8/0x3d9
[    2.890002]  [<ffffffff82055a12>] inet_init+0x16d/0x23d
[    2.893335]  [<ffffffff820558a5>] ? inet_init+0x0/0x23d
[    2.896669]  [<ffffffff810001df>] do_one_initcall+0x3f/0x190
[    2.900002]  [<ffffffff8201a71a>] kernel_init+0x161/0x1ea
[    2.903336]  [<ffffffff81025d04>] kernel_thread_helper+0x4/0x10
[    2.906669]  [<ffffffff8201a5b9>] ? kernel_init+0x0/0x1ea
[    2.910003]  [<ffffffff81025d00>] ? kernel_thread_helper+0x0/0x10
[    2.913334] ---[ end trace e93713a9d40cd073 ]---
[    2.916670] ------------[ cut here ]------------
[    2.920002] WARNING: at mm/vmalloc.c:107 vmap_page_range_noflush+0x309/0x3a0()
[    2.923334] Modules linked in:
[    2.926857] Pid: 1, comm: swapper Tainted: G        W   2.6.35-rc3-tip+ #13762
[    2.930001] Call Trace:
[    2.933336]  [<ffffffff8106207b>] warn_slowpath_common+0x6b/0xa0
[    2.936669]  [<ffffffff810620c5>] warn_slowpath_null+0x15/0x20
[    2.940002]  [<ffffffff810de1c9>] vmap_page_range_noflush+0x309/0x3a0
[    2.943336]  [<ffffffff810de28d>] map_vm_area+0x2d/0x50
[    2.946669]  [<ffffffff810de3c8>] __vmalloc_area_node+0x118/0x180
[    2.950002]  [<ffffffff810ec3fe>] ? slob_page_alloc+0x1ae/0x270
[    2.953336]  [<ffffffff820324ec>] ? alloc_large_system_hash+0x15e/0x222
[    2.956669]  [<ffffffff810de4d2>] __vmalloc_node+0xa2/0xb0
[    2.960002]  [<ffffffff820324ec>] ? alloc_large_system_hash+0x15e/0x222
[    2.963336]  [<ffffffff810de69d>] __vmalloc+0x1d/0x20
[    2.966669]  [<ffffffff820324ec>] alloc_large_system_hash+0x15e/0x222
[    2.970002]  [<ffffffff820558a5>] ? inet_init+0x0/0x23d
[    2.973336]  [<ffffffff82054d9e>] tcp_init+0xa8/0x3d9
[    2.976669]  [<ffffffff82055a12>] inet_init+0x16d/0x23d
[    2.980002]  [<ffffffff820558a5>] ? inet_init+0x0/0x23d
[    2.983336]  [<ffffffff810001df>] do_one_initcall+0x3f/0x190
[    2.986669]  [<ffffffff8201a71a>] kernel_init+0x161/0x1ea
[    2.990003]  [<ffffffff81025d04>] kernel_thread_helper+0x4/0x10
[    2.993336]  [<ffffffff8201a5b9>] ? kernel_init+0x0/0x1ea
[    2.996669]  [<ffffffff81025d00>] ? kernel_thread_helper+0x0/0x10
[    3.000001] ---[ end trace e93713a9d40cd074 ]---
[    3.003336] ------------[ cut here ]------------
[    3.006669] WARNING: at mm/vmalloc.c:107 vmap_page_range_noflush+0x309/0x3a0()
[    3.010001] Modules linked in:
[    3.013523] Pid: 1, comm: swapper Tainted: G        W   2.6.35-rc3-tip+ #13762
[    3.016667] Call Trace:
[    3.020002]  [<ffffffff8106207b>] warn_slowpath_common+0x6b/0xa0
[    3.023336]  [<ffffffff810620c5>] warn_slowpath_null+0x15/0x20
[    3.026669]  [<ffffffff810de1c9>] vmap_page_range_noflush+0x309/0x3a0
[    3.030003]  [<ffffffff810de28d>] map_vm_area+0x2d/0x50
[    3.033336]  [<ffffffff810de3c8>] __vmalloc_area_node+0x118/0x180
[    3.036669]  [<ffffffff810ec3fe>] ? slob_page_alloc+0x1ae/0x270
[    3.040003]  [<ffffffff820324ec>] ? alloc_large_system_hash+0x15e/0x222
[    3.043336]  [<ffffffff810de4d2>] __vmalloc_node+0xa2/0xb0
[    3.046669]  [<ffffffff820324ec>] ? alloc_large_system_hash+0x15e/0x222
[    3.050002]  [<ffffffff810de69d>] __vmalloc+0x1d/0x20
[    3.053336]  [<ffffffff820324ec>] alloc_large_system_hash+0x15e/0x222
[    3.056669]  [<ffffffff820558a5>] ? inet_init+0x0/0x23d
[    3.060003]  [<ffffffff82054d9e>] tcp_init+0xa8/0x3d9
[    3.063336]  [<ffffffff82055a12>] inet_init+0x16d/0x23d
[    3.066668]  [<ffffffff820558a5>] ? inet_init+0x0/0x23d
[    3.070002]  [<ffffffff810001df>] do_one_initcall+0x3f/0x190
[    3.073336]  [<ffffffff8201a71a>] kernel_init+0x161/0x1ea
[    3.076669]  [<ffffffff81025d04>] kernel_thread_helper+0x4/0x10
[    3.080002]  [<ffffffff8201a5b9>] ? kernel_init+0x0/0x1ea
[    3.083336]  [<ffffffff81025d00>] ? kernel_thread_helper+0x0/0x10
[    3.086668] ---[ end trace e93713a9d40cd075 ]---
[    3.090002] Kernel panic - not syncing: Failed to allocate TCP established hash table
[    3.090004] 

Re: [tip:x86/alternatives] x86, alternatives: Use 16-bit numbers for cpufeature index

[H. Peter Anvin]

On 06/29/2010 02:15 AM, Ingo Molnar wrote:
> 
> Hm, this patch is causing trouble in -tip testing again - it's triggering a 
> colorful boot crash:
> 
> [    2.220002] calling  inet_init+0x0/0x23d @ 1
> [    2.223343] NET: Registered protocol family 2
> [    2.226727] IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
> [    2.233492] ------------[ cut here ]------------
> [    2.236671] WARNING: at mm/vmalloc.c:107 vmap_page_range_noflush+0x309/0x3a0()
> [    2.240001] Modules linked in:
> ...
> [    3.090002] Kernel panic - not syncing: Failed to allocate TCP established hash table
> 
> So i've zapped them again. We really need to get to the bottom of this. Config 
> and bootlog attached.
> 
> The crash looks very weird - and it's consistent with possible effects of some 
> sort of code patching failure/mismatch.
> 
> It goes away if i revert these two:
> 
>  a3d2d12: x86, alternatives: correct obsolete use of "u8" in static_cpu_has()
>  5dc71d4: x86, alternatives: Use 16-bit numbers for cpufeature index
> 
> I reproduced the crash twice before testing the revert.
> 

Hi Ingo,

I'm pretty sure that these are related to gcc and/or binutils
differences, so it would be nice to get the .o and .s files of the
failing locations (in this case mm/vmalloc.[so]) *as built on the
failing machines*.

	-hpa

-- 
H. Peter Anvin, Intel Open Source Technology Center
I work for Intel.  I don't speak on their behalf.

[tip:x86/alternatives] x86, alternatives: Use 16-bit numbers for cpufeature index

[tip-bot for H. Peter Anvin]

Commit-ID:  83a7a2ad2a9173dcabc05df0f01d1d85b7ba1c2c
Gitweb:     http://git.kernel.org/tip/83a7a2ad2a9173dcabc05df0f01d1d85b7ba1c2c
Author:     H. Peter Anvin <hpa@linux.intel.com>
AuthorDate: Thu, 10 Jun 2010 00:10:43 +0000
Committer:  H. Peter Anvin <hpa@zytor.com>
CommitDate: Wed, 7 Jul 2010 10:36:28 -0700

x86, alternatives: Use 16-bit numbers for cpufeature index

We already have cpufeature indicies above 255, so use a 16-bit number
for the alternatives index.  This consumes a padding field and so
doesn't add any size, but it means that abusing the padding field to
create assembly errors on overflow no longer works.  We can retain the
test simply by redirecting it to the .discard section, however.

[ v3: updated to include open-coded locations ]

Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
LKML-Reference: <tip-f88731e3068f9d1392ba71cc9f50f035d26a0d4f@git.kernel.org>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
---
 arch/x86/include/asm/alternative.h |    7 ++++---
 arch/x86/include/asm/cpufeature.h  |   14 ++++++++------
 arch/x86/kernel/entry_32.S         |    2 +-
 arch/x86/lib/clear_page_64.S       |    2 +-
 arch/x86/lib/copy_page_64.S        |    2 +-
 arch/x86/lib/memcpy_64.S           |    2 +-
 arch/x86/lib/memset_64.S           |    2 +-
 7 files changed, 17 insertions(+), 14 deletions(-)

diff --git a/arch/x86/include/asm/alternative.h b/arch/x86/include/asm/alternative.h
index 03b6bb5..bc6abb7 100644
--- a/arch/x86/include/asm/alternative.h
+++ b/arch/x86/include/asm/alternative.h
@@ -45,10 +45,9 @@
 struct alt_instr {
 	u8 *instr;		/* original instruction */
 	u8 *replacement;
-	u8  cpuid;		/* cpuid bit set for replacement */
+	u16 cpuid;		/* cpuid bit set for replacement */
 	u8  instrlen;		/* length of original instruction */
 	u8  replacementlen;	/* length of new instruction, <= instrlen */
-	u8  pad1;
 #ifdef CONFIG_X86_64
 	u32 pad2;
 #endif
@@ -86,9 +85,11 @@ static inline int alternatives_text_reserved(void *start, void *end)
       _ASM_ALIGN "\n"							\
       _ASM_PTR "661b\n"				/* label           */	\
       _ASM_PTR "663f\n"				/* new instruction */	\
-      "	 .byte " __stringify(feature) "\n"	/* feature bit     */	\
+      "	 .word " __stringify(feature) "\n"	/* feature bit     */	\
       "	 .byte 662b-661b\n"			/* sourcelen       */	\
       "	 .byte 664f-663f\n"			/* replacementlen  */	\
+      ".previous\n"							\
+      ".section .discard,\"aw\",@progbits\n"				\
       "	 .byte 0xff + (664f-663f) - (662b-661b)\n" /* rlen <= slen */	\
       ".previous\n"							\
       ".section .altinstr_replacement, \"ax\"\n"			\
diff --git a/arch/x86/include/asm/cpufeature.h b/arch/x86/include/asm/cpufeature.h
index 4681459..e8b8896 100644
--- a/arch/x86/include/asm/cpufeature.h
+++ b/arch/x86/include/asm/cpufeature.h
@@ -291,7 +291,7 @@ extern const char * const x86_power_flags[32];
  * patch the target code for additional performance.
  *
  */
-static __always_inline __pure bool __static_cpu_has(u8 bit)
+static __always_inline __pure bool __static_cpu_has(u16 bit)
 {
 #if __GNUC__ > 4 || (__GNUC__ == 4 && __GNUC_MINOR__ >= 5)
 		asm goto("1: jmp %l[t_no]\n"
@@ -300,11 +300,11 @@ static __always_inline __pure bool __static_cpu_has(u8 bit)
 			 _ASM_ALIGN "\n"
 			 _ASM_PTR "1b\n"
 			 _ASM_PTR "0\n" 	/* no replacement */
-			 " .byte %P0\n"		/* feature bit */
+			 " .word %P0\n"		/* feature bit */
 			 " .byte 2b - 1b\n"	/* source len */
 			 " .byte 0\n"		/* replacement len */
-			 " .byte 0xff + 0 - (2b-1b)\n"	/* padding */
 			 ".previous\n"
+			 /* skipping size check since replacement size = 0 */
 			 : : "i" (bit) : : t_no);
 		return true;
 	t_no:
@@ -318,10 +318,12 @@ static __always_inline __pure bool __static_cpu_has(u8 bit)
 			     _ASM_ALIGN "\n"
 			     _ASM_PTR "1b\n"
 			     _ASM_PTR "3f\n"
-			     " .byte %P1\n"		/* feature bit */
+			     " .word %P1\n"		/* feature bit */
 			     " .byte 2b - 1b\n"		/* source len */
 			     " .byte 4f - 3f\n"		/* replacement len */
-			     " .byte 0xff + (4f-3f) - (2b-1b)\n" /* padding */
+			     ".previous\n"
+			     ".section .discard,\"aw\",@progbits\n"
+			     " .byte 0xff + (4f-3f) - (2b-1b)\n" /* size check */
 			     ".previous\n"
 			     ".section .altinstr_replacement,\"ax\"\n"
 			     "3: movb $1,%0\n"
@@ -337,7 +339,7 @@ static __always_inline __pure bool __static_cpu_has(u8 bit)
 (								\
 	__builtin_constant_p(boot_cpu_has(bit)) ?		\
 		boot_cpu_has(bit) :				\
-	(__builtin_constant_p(bit) && !((bit) & ~0xff)) ?	\
+	__builtin_constant_p(bit) ?				\
 		__static_cpu_has(bit) :				\
 		boot_cpu_has(bit)				\
 )
diff --git a/arch/x86/kernel/entry_32.S b/arch/x86/kernel/entry_32.S
index cd49141..7862cf5 100644
--- a/arch/x86/kernel/entry_32.S
+++ b/arch/x86/kernel/entry_32.S
@@ -914,7 +914,7 @@ ENTRY(simd_coprocessor_error)
 	.balign 4
 	.long 661b
 	.long 663f
-	.byte X86_FEATURE_XMM
+	.word X86_FEATURE_XMM
 	.byte 662b-661b
 	.byte 664f-663f
 .previous
diff --git a/arch/x86/lib/clear_page_64.S b/arch/x86/lib/clear_page_64.S
index ebeafcc..aa4326b 100644
--- a/arch/x86/lib/clear_page_64.S
+++ b/arch/x86/lib/clear_page_64.S
@@ -52,7 +52,7 @@ ENDPROC(clear_page)
 	.align 8
 	.quad clear_page
 	.quad 1b
-	.byte X86_FEATURE_REP_GOOD
+	.word X86_FEATURE_REP_GOOD
 	.byte .Lclear_page_end - clear_page
 	.byte 2b - 1b
 	.previous
diff --git a/arch/x86/lib/copy_page_64.S b/arch/x86/lib/copy_page_64.S
index 727a5d4..6fec2d1 100644
--- a/arch/x86/lib/copy_page_64.S
+++ b/arch/x86/lib/copy_page_64.S
@@ -113,7 +113,7 @@ ENDPROC(copy_page)
 	.align 8
 	.quad copy_page
 	.quad 1b
-	.byte X86_FEATURE_REP_GOOD
+	.word X86_FEATURE_REP_GOOD
 	.byte .Lcopy_page_end - copy_page
 	.byte 2b - 1b
 	.previous
diff --git a/arch/x86/lib/memcpy_64.S b/arch/x86/lib/memcpy_64.S
index f82e884..bcbcd1e 100644
--- a/arch/x86/lib/memcpy_64.S
+++ b/arch/x86/lib/memcpy_64.S
@@ -131,7 +131,7 @@ ENDPROC(__memcpy)
 	.align 8
 	.quad memcpy
 	.quad .Lmemcpy_c
-	.byte X86_FEATURE_REP_GOOD
+	.word X86_FEATURE_REP_GOOD
 
 	/*
 	 * Replace only beginning, memcpy is used to apply alternatives,
diff --git a/arch/x86/lib/memset_64.S b/arch/x86/lib/memset_64.S
index e88d3b8..09d3442 100644
--- a/arch/x86/lib/memset_64.S
+++ b/arch/x86/lib/memset_64.S
@@ -121,7 +121,7 @@ ENDPROC(__memset)
 	.align 8
 	.quad memset
 	.quad .Lmemset_c
-	.byte X86_FEATURE_REP_GOOD
+	.word X86_FEATURE_REP_GOOD
 	.byte .Lfinal - memset
 	.byte .Lmemset_e - .Lmemset_c
 	.previous

[tip:x86/cpu] x86, cpu: Clean up formatting in cpufeature.h, remove override

[tip-bot for H. Peter Anvin]

Commit-ID:  278bc5f6abd69dd868746dbd642266ac09a9c9c6
Gitweb:     http://git.kernel.org/tip/278bc5f6abd69dd868746dbd642266ac09a9c9c6
Author:     H. Peter Anvin <hpa@linux.intel.com>
AuthorDate: Mon, 19 Jul 2010 18:53:51 -0700
Committer:  H. Peter Anvin <hpa@linux.intel.com>
CommitDate: Mon, 19 Jul 2010 19:02:35 -0700

x86, cpu: Clean up formatting in cpufeature.h, remove override

Clean up the formatting in cpufeature.h, and remove an unnecessary
name override.

Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
LKML-Reference: <tip-*@git.kernel.org>
---
 arch/x86/include/asm/cpufeature.h |   12 ++++++------
 1 files changed, 6 insertions(+), 6 deletions(-)

diff --git a/arch/x86/include/asm/cpufeature.h b/arch/x86/include/asm/cpufeature.h
index d5ea3e3..4be50dd 100644
--- a/arch/x86/include/asm/cpufeature.h
+++ b/arch/x86/include/asm/cpufeature.h
@@ -165,7 +165,7 @@
 #define X86_FEATURE_ARAT	(7*32+ 1) /* Always Running APIC Timer */
 #define X86_FEATURE_CPB		(7*32+ 2) /* AMD Core Performance Boost */
 #define X86_FEATURE_EPB		(7*32+ 3) /* IA32_ENERGY_PERF_BIAS support */
-#define X86_FEATURE_XSAVEOPT	(7*32+4) /* "xsaveopt" Optimized Xsave */
+#define X86_FEATURE_XSAVEOPT	(7*32+ 4) /* Optimized Xsave */
 
 /* Virtualization flags: Linux defined, word 8 */
 #define X86_FEATURE_TPR_SHADOW  (8*32+ 0) /* Intel TPR Shadow */
@@ -173,13 +173,13 @@
 #define X86_FEATURE_FLEXPRIORITY (8*32+ 2) /* Intel FlexPriority */
 #define X86_FEATURE_EPT         (8*32+ 3) /* Intel Extended Page Table */
 #define X86_FEATURE_VPID        (8*32+ 4) /* Intel Virtual Processor ID */
-#define X86_FEATURE_NPT		(8*32+5)  /* AMD Nested Page Table support */
-#define X86_FEATURE_LBRV	(8*32+6)  /* AMD LBR Virtualization support */
-#define X86_FEATURE_SVML	(8*32+7)  /* "svm_lock" AMD SVM locking MSR */
-#define X86_FEATURE_NRIPS	(8*32+8)  /* "nrip_save" AMD SVM next_rip save */
+#define X86_FEATURE_NPT		(8*32+ 5) /* AMD Nested Page Table support */
+#define X86_FEATURE_LBRV	(8*32+ 6) /* AMD LBR Virtualization support */
+#define X86_FEATURE_SVML	(8*32+ 7) /* "svm_lock" AMD SVM locking MSR */
+#define X86_FEATURE_NRIPS	(8*32+ 8) /* "nrip_save" AMD SVM next_rip save */
 
 /* Intel-defined CPU features, CPUID level 0x00000007:0 (ebx), word 9 */
-#define X86_FEATURE_FSGSBASE	(9*32+0)  /* {RD/WR}{FS/GS}BASE instructions*/
+#define X86_FEATURE_FSGSBASE	(9*32+ 0) /* {RD/WR}{FS/GS}BASE instructions*/
 
 #if defined(__KERNEL__) && !defined(__ASSEMBLY__)
 

[tip:x86/cpu] x86, cpu: Split addon_cpuid_features.c

[tip-bot for H. Peter Anvin]

Commit-ID:  2decb194e65ab66eaf787512dc572cdc99893b24
Gitweb:     http://git.kernel.org/tip/2decb194e65ab66eaf787512dc572cdc99893b24
Author:     H. Peter Anvin <hpa@linux.intel.com>
AuthorDate: Mon, 19 Jul 2010 18:32:04 -0700
Committer:  H. Peter Anvin <hpa@linux.intel.com>
CommitDate: Mon, 19 Jul 2010 19:02:41 -0700

x86, cpu: Split addon_cpuid_features.c

addon_cpuid_features.c contains exactly two almost completely
unrelated functions, plus has a long and very generic name.  Split it
into two files, scattered.c for the scattered feature flags, and
topology.c for the topology information.

Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
LKML-Reference: <tip-*@git.kernel.org>
---
 arch/x86/kernel/cpu/Makefile               |    2 +-
 arch/x86/kernel/cpu/addon_cpuid_features.c |  150 ----------------------------
 arch/x86/kernel/cpu/scattered.c            |   61 +++++++++++
 arch/x86/kernel/cpu/topology.c             |   99 ++++++++++++++++++
 4 files changed, 161 insertions(+), 151 deletions(-)

diff --git a/arch/x86/kernel/cpu/Makefile b/arch/x86/kernel/cpu/Makefile
index 3a785da..5e3a351 100644
--- a/arch/x86/kernel/cpu/Makefile
+++ b/arch/x86/kernel/cpu/Makefile
@@ -12,7 +12,7 @@ endif
 nostackp := $(call cc-option, -fno-stack-protector)
 CFLAGS_common.o		:= $(nostackp)
 
-obj-y			:= intel_cacheinfo.o addon_cpuid_features.o
+obj-y			:= intel_cacheinfo.o scattered.o topology.o
 obj-y			+= proc.o capflags.o powerflags.o common.o
 obj-y			+= vmware.o hypervisor.o sched.o mshyperv.o
 
diff --git a/arch/x86/kernel/cpu/addon_cpuid_features.c b/arch/x86/kernel/cpu/addon_cpuid_features.c
deleted file mode 100644
index 41eebcd..0000000
--- a/arch/x86/kernel/cpu/addon_cpuid_features.c
+++ /dev/null
@@ -1,150 +0,0 @@
-/*
- *	Routines to indentify additional cpu features that are scattered in
- *	cpuid space.
- */
-#include <linux/cpu.h>
-
-#include <asm/pat.h>
-#include <asm/processor.h>
-
-#include <asm/apic.h>
-
-struct cpuid_bit {
-	u16 feature;
-	u8 reg;
-	u8 bit;
-	u32 level;
-	u32 sub_leaf;
-};
-
-enum cpuid_regs {
-	CR_EAX = 0,
-	CR_ECX,
-	CR_EDX,
-	CR_EBX
-};
-
-void __cpuinit init_scattered_cpuid_features(struct cpuinfo_x86 *c)
-{
-	u32 max_level;
-	u32 regs[4];
-	const struct cpuid_bit *cb;
-
-	static const struct cpuid_bit __cpuinitconst cpuid_bits[] = {
-		{ X86_FEATURE_IDA,		CR_EAX, 1, 0x00000006, 0 },
-		{ X86_FEATURE_ARAT,		CR_EAX, 2, 0x00000006, 0 },
-		{ X86_FEATURE_APERFMPERF,	CR_ECX, 0, 0x00000006, 0 },
-		{ X86_FEATURE_EPB,		CR_ECX, 3, 0x00000006, 0 },
-		{ X86_FEATURE_XSAVEOPT,		CR_EAX,	0, 0x0000000d, 1 },
-		{ X86_FEATURE_CPB,		CR_EDX, 9, 0x80000007, 0 },
-		{ X86_FEATURE_NPT,		CR_EDX, 0, 0x8000000a, 0 },
-		{ X86_FEATURE_LBRV,		CR_EDX, 1, 0x8000000a, 0 },
-		{ X86_FEATURE_SVML,		CR_EDX, 2, 0x8000000a, 0 },
-		{ X86_FEATURE_NRIPS,		CR_EDX, 3, 0x8000000a, 0 },
-		{ 0, 0, 0, 0, 0 }
-	};
-
-	for (cb = cpuid_bits; cb->feature; cb++) {
-
-		/* Verify that the level is valid */
-		max_level = cpuid_eax(cb->level & 0xffff0000);
-		if (max_level < cb->level ||
-		    max_level > (cb->level | 0xffff))
-			continue;
-
-		cpuid_count(cb->level, cb->sub_leaf, &regs[CR_EAX],
-			    &regs[CR_EBX], &regs[CR_ECX], &regs[CR_EDX]);
-
-		if (regs[cb->reg] & (1 << cb->bit))
-			set_cpu_cap(c, cb->feature);
-	}
-}
-
-/* leaf 0xb SMT level */
-#define SMT_LEVEL	0
-
-/* leaf 0xb sub-leaf types */
-#define INVALID_TYPE	0
-#define SMT_TYPE	1
-#define CORE_TYPE	2
-
-#define LEAFB_SUBTYPE(ecx)		(((ecx) >> 8) & 0xff)
-#define BITS_SHIFT_NEXT_LEVEL(eax)	((eax) & 0x1f)
-#define LEVEL_MAX_SIBLINGS(ebx)		((ebx) & 0xffff)
-
-/*
- * Check for extended topology enumeration cpuid leaf 0xb and if it
- * exists, use it for populating initial_apicid and cpu topology
- * detection.
- */
-void __cpuinit detect_extended_topology(struct cpuinfo_x86 *c)
-{
-#ifdef CONFIG_SMP
-	unsigned int eax, ebx, ecx, edx, sub_index;
-	unsigned int ht_mask_width, core_plus_mask_width;
-	unsigned int core_select_mask, core_level_siblings;
-	static bool printed;
-
-	if (c->cpuid_level < 0xb)
-		return;
-
-	cpuid_count(0xb, SMT_LEVEL, &eax, &ebx, &ecx, &edx);
-
-	/*
-	 * check if the cpuid leaf 0xb is actually implemented.
-	 */
-	if (ebx == 0 || (LEAFB_SUBTYPE(ecx) != SMT_TYPE))
-		return;
-
-	set_cpu_cap(c, X86_FEATURE_XTOPOLOGY);
-
-	/*
-	 * initial apic id, which also represents 32-bit extended x2apic id.
-	 */
-	c->initial_apicid = edx;
-
-	/*
-	 * Populate HT related information from sub-leaf level 0.
-	 */
-	core_level_siblings = smp_num_siblings = LEVEL_MAX_SIBLINGS(ebx);
-	core_plus_mask_width = ht_mask_width = BITS_SHIFT_NEXT_LEVEL(eax);
-
-	sub_index = 1;
-	do {
-		cpuid_count(0xb, sub_index, &eax, &ebx, &ecx, &edx);
-
-		/*
-		 * Check for the Core type in the implemented sub leaves.
-		 */
-		if (LEAFB_SUBTYPE(ecx) == CORE_TYPE) {
-			core_level_siblings = LEVEL_MAX_SIBLINGS(ebx);
-			core_plus_mask_width = BITS_SHIFT_NEXT_LEVEL(eax);
-			break;
-		}
-
-		sub_index++;
-	} while (LEAFB_SUBTYPE(ecx) != INVALID_TYPE);
-
-	core_select_mask = (~(-1 << core_plus_mask_width)) >> ht_mask_width;
-
-	c->cpu_core_id = apic->phys_pkg_id(c->initial_apicid, ht_mask_width)
-						 & core_select_mask;
-	c->phys_proc_id = apic->phys_pkg_id(c->initial_apicid, core_plus_mask_width);
-	/*
-	 * Reinit the apicid, now that we have extended initial_apicid.
-	 */
-	c->apicid = apic->phys_pkg_id(c->initial_apicid, 0);
-
-	c->x86_max_cores = (core_level_siblings / smp_num_siblings);
-
-	if (!printed) {
-		printk(KERN_INFO  "CPU: Physical Processor ID: %d\n",
-		       c->phys_proc_id);
-		if (c->x86_max_cores > 1)
-			printk(KERN_INFO  "CPU: Processor Core ID: %d\n",
-			       c->cpu_core_id);
-		printed = 1;
-	}
-	return;
-#endif
-}
diff --git a/arch/x86/kernel/cpu/scattered.c b/arch/x86/kernel/cpu/scattered.c
new file mode 100644
index 0000000..9815364
--- /dev/null
+++ b/arch/x86/kernel/cpu/scattered.c
@@ -0,0 +1,61 @@
+/*
+ *	Routines to indentify additional cpu features that are scattered in
+ *	cpuid space.
+ */
+#include <linux/cpu.h>
+
+#include <asm/pat.h>
+#include <asm/processor.h>
+
+#include <asm/apic.h>
+
+struct cpuid_bit {
+	u16 feature;
+	u8 reg;
+	u8 bit;
+	u32 level;
+	u32 sub_leaf;
+};
+
+enum cpuid_regs {
+	CR_EAX = 0,
+	CR_ECX,
+	CR_EDX,
+	CR_EBX
+};
+
+void __cpuinit init_scattered_cpuid_features(struct cpuinfo_x86 *c)
+{
+	u32 max_level;
+	u32 regs[4];
+	const struct cpuid_bit *cb;
+
+	static const struct cpuid_bit __cpuinitconst cpuid_bits[] = {
+		{ X86_FEATURE_IDA,		CR_EAX, 1, 0x00000006, 0 },
+		{ X86_FEATURE_ARAT,		CR_EAX, 2, 0x00000006, 0 },
+		{ X86_FEATURE_APERFMPERF,	CR_ECX, 0, 0x00000006, 0 },
+		{ X86_FEATURE_EPB,		CR_ECX, 3, 0x00000006, 0 },
+		{ X86_FEATURE_XSAVEOPT,		CR_EAX,	0, 0x0000000d, 1 },
+		{ X86_FEATURE_CPB,		CR_EDX, 9, 0x80000007, 0 },
+		{ X86_FEATURE_NPT,		CR_EDX, 0, 0x8000000a, 0 },
+		{ X86_FEATURE_LBRV,		CR_EDX, 1, 0x8000000a, 0 },
+		{ X86_FEATURE_SVML,		CR_EDX, 2, 0x8000000a, 0 },
+		{ X86_FEATURE_NRIPS,		CR_EDX, 3, 0x8000000a, 0 },
+		{ 0, 0, 0, 0, 0 }
+	};
+
+	for (cb = cpuid_bits; cb->feature; cb++) {
+
+		/* Verify that the level is valid */
+		max_level = cpuid_eax(cb->level & 0xffff0000);
+		if (max_level < cb->level ||
+		    max_level > (cb->level | 0xffff))
+			continue;
+
+		cpuid_count(cb->level, cb->sub_leaf, &regs[CR_EAX],
+			    &regs[CR_EBX], &regs[CR_ECX], &regs[CR_EDX]);
+
+		if (regs[cb->reg] & (1 << cb->bit))
+			set_cpu_cap(c, cb->feature);
+	}
+}
diff --git a/arch/x86/kernel/cpu/topology.c b/arch/x86/kernel/cpu/topology.c
new file mode 100644
index 0000000..4397e98
--- /dev/null
+++ b/arch/x86/kernel/cpu/topology.c
@@ -0,0 +1,99 @@
+/*
+ * Check for extended topology enumeration cpuid leaf 0xb and if it
+ * exists, use it for populating initial_apicid and cpu topology
+ * detection.
+ */
+
+#include <linux/cpu.h>
+#include <asm/apic.h>
+#include <asm/pat.h>
+#include <asm/processor.h>
+
+/* leaf 0xb SMT level */
+#define SMT_LEVEL	0
+
+/* leaf 0xb sub-leaf types */
+#define INVALID_TYPE	0
+#define SMT_TYPE	1
+#define CORE_TYPE	2
+
+#define LEAFB_SUBTYPE(ecx)		(((ecx) >> 8) & 0xff)
+#define BITS_SHIFT_NEXT_LEVEL(eax)	((eax) & 0x1f)
+#define LEVEL_MAX_SIBLINGS(ebx)		((ebx) & 0xffff)
+
+/*
+ * Check for extended topology enumeration cpuid leaf 0xb and if it
+ * exists, use it for populating initial_apicid and cpu topology
+ * detection.
+ */
+void __cpuinit detect_extended_topology(struct cpuinfo_x86 *c)
+{
+#ifdef CONFIG_SMP
+	unsigned int eax, ebx, ecx, edx, sub_index;
+	unsigned int ht_mask_width, core_plus_mask_width;
+	unsigned int core_select_mask, core_level_siblings;
+	static bool printed;
+
+	if (c->cpuid_level < 0xb)
+		return;
+
+	cpuid_count(0xb, SMT_LEVEL, &eax, &ebx, &ecx, &edx);
+
+	/*
+	 * check if the cpuid leaf 0xb is actually implemented.
+	 */
+	if (ebx == 0 || (LEAFB_SUBTYPE(ecx) != SMT_TYPE))
+		return;
+
+	set_cpu_cap(c, X86_FEATURE_XTOPOLOGY);
+
+	/*
+	 * initial apic id, which also represents 32-bit extended x2apic id.
+	 */
+	c->initial_apicid = edx;
+
+	/*
+	 * Populate HT related information from sub-leaf level 0.
+	 */
+	core_level_siblings = smp_num_siblings = LEVEL_MAX_SIBLINGS(ebx);
+	core_plus_mask_width = ht_mask_width = BITS_SHIFT_NEXT_LEVEL(eax);
+
+	sub_index = 1;
+	do {
+		cpuid_count(0xb, sub_index, &eax, &ebx, &ecx, &edx);
+
+		/*
+		 * Check for the Core type in the implemented sub leaves.
+		 */
+		if (LEAFB_SUBTYPE(ecx) == CORE_TYPE) {
+			core_level_siblings = LEVEL_MAX_SIBLINGS(ebx);
+			core_plus_mask_width = BITS_SHIFT_NEXT_LEVEL(eax);
+			break;
+		}
+
+		sub_index++;
+	} while (LEAFB_SUBTYPE(ecx) != INVALID_TYPE);
+
+	core_select_mask = (~(-1 << core_plus_mask_width)) >> ht_mask_width;
+
+	c->cpu_core_id = apic->phys_pkg_id(c->initial_apicid, ht_mask_width)
+						 & core_select_mask;
+	c->phys_proc_id = apic->phys_pkg_id(c->initial_apicid, core_plus_mask_width);
+	/*
+	 * Reinit the apicid, now that we have extended initial_apicid.
+	 */
+	c->apicid = apic->phys_pkg_id(c->initial_apicid, 0);
+
+	c->x86_max_cores = (core_level_siblings / smp_num_siblings);
+
+	if (!printed) {
+		printk(KERN_INFO  "CPU: Physical Processor ID: %d\n",
+		       c->phys_proc_id);
+		if (c->x86_max_cores > 1)
+			printk(KERN_INFO  "CPU: Processor Core ID: %d\n",
+			       c->cpu_core_id);
+		printed = 1;
+	}
+	return;
+#endif
+}

[tip:x86/urgent] x86, asm: Refactor atomic64_386_32.S to support old binutils and be cleaner

[tip-bot for Luca Barbieri]

Commit-ID:  30246557a06bb20618bed906a06d1e1e0faa8bb4
Gitweb:     http://git.kernel.org/tip/30246557a06bb20618bed906a06d1e1e0faa8bb4
Author:     Luca Barbieri <luca@luca-barbieri.com>
AuthorDate: Fri, 6 Aug 2010 04:04:38 +0200
Committer:  H. Peter Anvin <hpa@zytor.com>
CommitDate: Wed, 11 Aug 2010 21:03:28 -0700

x86, asm: Refactor atomic64_386_32.S to support old binutils and be cleaner

The old code didn't work on binutils 2.12 because setting a symbol to
a register apparently requires a fairly recent version.

This commit refactors the code to use the C preprocessor instead, and
in the process makes the whole code a bit easier to understand.

The object code produced is unchanged as expected.

This fixes kernel bugzilla 16506.

Reported-by: Dieter Stussy <kd6lvw+software@kd6lvw.ampr.org>
Signed-off-by: Luca Barbieri <luca@luca-barbieri.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Cc: <stable@kernel.org> 2.6.35
LKML-Reference: <tip-*@git.kernel.org>
---
 arch/x86/lib/atomic64_386_32.S |  236 ++++++++++++++++++++++------------------
 1 files changed, 128 insertions(+), 108 deletions(-)

diff --git a/arch/x86/lib/atomic64_386_32.S b/arch/x86/lib/atomic64_386_32.S
index 4a5979a..78ee8e0 100644
--- a/arch/x86/lib/atomic64_386_32.S
+++ b/arch/x86/lib/atomic64_386_32.S
@@ -25,150 +25,170 @@
 	CFI_ADJUST_CFA_OFFSET -4
 .endm
 
-.macro BEGIN func reg
-$v = \reg
-
-ENTRY(atomic64_\func\()_386)
-	CFI_STARTPROC
-	LOCK $v
-
-.macro RETURN
-	UNLOCK $v
+#define BEGIN(op) \
+.macro END; \
+	CFI_ENDPROC; \
+ENDPROC(atomic64_##op##_386); \
+.purgem END; \
+.endm; \
+ENTRY(atomic64_##op##_386); \
+	CFI_STARTPROC; \
+	LOCK v;
+
+#define RET \
+	UNLOCK v; \
 	ret
-.endm
-
-.macro END_
-	CFI_ENDPROC
-ENDPROC(atomic64_\func\()_386)
-.purgem RETURN
-.purgem END_
-.purgem END
-.endm
-
-.macro END
-RETURN
-END_
-.endm
-.endm
-
-BEGIN read %ecx
-	movl  ($v), %eax
-	movl 4($v), %edx
-END
-
-BEGIN set %esi
-	movl %ebx,  ($v)
-	movl %ecx, 4($v)
-END
-
-BEGIN xchg %esi
-	movl  ($v), %eax
-	movl 4($v), %edx
-	movl %ebx,  ($v)
-	movl %ecx, 4($v)
-END
-
-BEGIN add %ecx
-	addl %eax,  ($v)
-	adcl %edx, 4($v)
-END
 
-BEGIN add_return %ecx
-	addl  ($v), %eax
-	adcl 4($v), %edx
-	movl %eax,  ($v)
-	movl %edx, 4($v)
-END
-
-BEGIN sub %ecx
-	subl %eax,  ($v)
-	sbbl %edx, 4($v)
-END
-
-BEGIN sub_return %ecx
+#define RET_END \
+	RET; \
+	END
+
+#define v %ecx
+BEGIN(read)
+	movl  (v), %eax
+	movl 4(v), %edx
+RET_END
+#undef v
+
+#define v %esi
+BEGIN(set)
+	movl %ebx,  (v)
+	movl %ecx, 4(v)
+RET_END
+#undef v
+
+#define v  %esi
+BEGIN(xchg)
+	movl  (v), %eax
+	movl 4(v), %edx
+	movl %ebx,  (v)
+	movl %ecx, 4(v)
+RET_END
+#undef v
+
+#define v %ecx
+BEGIN(add)
+	addl %eax,  (v)
+	adcl %edx, 4(v)
+RET_END
+#undef v
+
+#define v %ecx
+BEGIN(add_return)
+	addl  (v), %eax
+	adcl 4(v), %edx
+	movl %eax,  (v)
+	movl %edx, 4(v)
+RET_END
+#undef v
+
+#define v %ecx
+BEGIN(sub)
+	subl %eax,  (v)
+	sbbl %edx, 4(v)
+RET_END
+#undef v
+
+#define v %ecx
+BEGIN(sub_return)
 	negl %edx
 	negl %eax
 	sbbl $0, %edx
-	addl  ($v), %eax
-	adcl 4($v), %edx
-	movl %eax,  ($v)
-	movl %edx, 4($v)
-END
-
-BEGIN inc %esi
-	addl $1,  ($v)
-	adcl $0, 4($v)
-END
-
-BEGIN inc_return %esi
-	movl  ($v), %eax
-	movl 4($v), %edx
+	addl  (v), %eax
+	adcl 4(v), %edx
+	movl %eax,  (v)
+	movl %edx, 4(v)
+RET_END
+#undef v
+
+#define v %esi
+BEGIN(inc)
+	addl $1,  (v)
+	adcl $0, 4(v)
+RET_END
+#undef v
+
+#define v %esi
+BEGIN(inc_return)
+	movl  (v), %eax
+	movl 4(v), %edx
 	addl $1, %eax
 	adcl $0, %edx
-	movl %eax,  ($v)
-	movl %edx, 4($v)
-END
-
-BEGIN dec %esi
-	subl $1,  ($v)
-	sbbl $0, 4($v)
-END
-
-BEGIN dec_return %esi
-	movl  ($v), %eax
-	movl 4($v), %edx
+	movl %eax,  (v)
+	movl %edx, 4(v)
+RET_END
+#undef v
+
+#define v %esi
+BEGIN(dec)
+	subl $1,  (v)
+	sbbl $0, 4(v)
+RET_END
+#undef v
+
+#define v %esi
+BEGIN(dec_return)
+	movl  (v), %eax
+	movl 4(v), %edx
 	subl $1, %eax
 	sbbl $0, %edx
-	movl %eax,  ($v)
-	movl %edx, 4($v)
-END
+	movl %eax,  (v)
+	movl %edx, 4(v)
+RET_END
+#undef v
 
-BEGIN add_unless %ecx
+#define v %ecx
+BEGIN(add_unless)
 	addl %eax, %esi
 	adcl %edx, %edi
-	addl  ($v), %eax
-	adcl 4($v), %edx
+	addl  (v), %eax
+	adcl 4(v), %edx
 	cmpl %eax, %esi
 	je 3f
 1:
-	movl %eax,  ($v)
-	movl %edx, 4($v)
+	movl %eax,  (v)
+	movl %edx, 4(v)
 	movl $1, %eax
 2:
-RETURN
+	RET
 3:
 	cmpl %edx, %edi
 	jne 1b
 	xorl %eax, %eax
 	jmp 2b
-END_
+END
+#undef v
 
-BEGIN inc_not_zero %esi
-	movl  ($v), %eax
-	movl 4($v), %edx
+#define v %esi
+BEGIN(inc_not_zero)
+	movl  (v), %eax
+	movl 4(v), %edx
 	testl %eax, %eax
 	je 3f
 1:
 	addl $1, %eax
 	adcl $0, %edx
-	movl %eax,  ($v)
-	movl %edx, 4($v)
+	movl %eax,  (v)
+	movl %edx, 4(v)
 	movl $1, %eax
 2:
-RETURN
+	RET
 3:
 	testl %edx, %edx
 	jne 1b
 	jmp 2b
-END_
+END
+#undef v
 
-BEGIN dec_if_positive %esi
-	movl  ($v), %eax
-	movl 4($v), %edx
+#define v %esi
+BEGIN(dec_if_positive)
+	movl  (v), %eax
+	movl 4(v), %edx
 	subl $1, %eax
 	sbbl $0, %edx
 	js 1f
-	movl %eax,  ($v)
-	movl %edx, 4($v)
+	movl %eax,  (v)
+	movl %edx, 4(v)
 1:
-END
+RET_END
+#undef v

Re: [tip:x86/urgent] x86, asm: Refactor atomic64_386_32.S to support old binutils and be cleaner

[Luca Barbieri]

Any reason you applied the older version I attached to the bug,
instead of the second one?

NiTr0 reported an additional issue with this version you committed,
which is solved by the second patch I attached.

Re: [tip:x86/urgent] x86, asm: Refactor atomic64_386_32.S to support old binutils and be cleaner

[H. Peter Anvin]

On 08/12/2010 05:15 AM, Luca Barbieri wrote:
> Any reason you applied the older version I attached to the bug,
> instead of the second one?
> 
> NiTr0 reported an additional issue with this version you committed,
> which is solved by the second patch I attached.

I already had the first version queued up (I forgot to push it to the
public repository, however).  I'll just put in the incremental changes.

	-hpa

-- 
H. Peter Anvin, Intel Open Source Technology Center
I work for Intel.  I don't speak on their behalf.

Re: [tip:x86/urgent] x86, asm: Refactor atomic64_386_32.S to support old binutils and be cleaner

[Luca Barbieri]

> I already had the first version queued up (I forgot to push it to the
> public repository, however).  I'll just put in the incremental changes.

OK, thanks.

[tip:x86/urgent] x86, asm: Use a lower case name for the end macro in atomic64_386_32.S

[tip-bot for Luca Barbieri]

Commit-ID:  417484d47e115774745ef025bce712a102b6f86f
Gitweb:     http://git.kernel.org/tip/417484d47e115774745ef025bce712a102b6f86f
Author:     Luca Barbieri <luca@luca-barbieri.com>
AuthorDate: Thu, 12 Aug 2010 07:00:35 -0700
Committer:  H. Peter Anvin <hpa@zytor.com>
CommitDate: Thu, 12 Aug 2010 07:04:16 -0700

x86, asm: Use a lower case name for the end macro in atomic64_386_32.S

Use a lowercase name for the end macro, which somehow fixes a binutils 2.16
problem.

Signed-off-by: Luca Barbieri <luca@luca-barbieri.com>
LKML-Reference: <tip-30246557a06bb20618bed906a06d1e1e0faa8bb4@git.kernel.org>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
---
 arch/x86/lib/atomic64_386_32.S |   38 ++++++++++++++++++++------------------
 1 files changed, 20 insertions(+), 18 deletions(-)

diff --git a/arch/x86/lib/atomic64_386_32.S b/arch/x86/lib/atomic64_386_32.S
index 78ee8e0..2cda60a 100644
--- a/arch/x86/lib/atomic64_386_32.S
+++ b/arch/x86/lib/atomic64_386_32.S
@@ -26,35 +26,37 @@
 .endm
 
 #define BEGIN(op) \
-.macro END; \
+.macro endp; \
 	CFI_ENDPROC; \
 ENDPROC(atomic64_##op##_386); \
-.purgem END; \
+.purgem endp; \
 .endm; \
 ENTRY(atomic64_##op##_386); \
 	CFI_STARTPROC; \
 	LOCK v;
 
+#define ENDP endp
+
 #define RET \
 	UNLOCK v; \
 	ret
 
-#define RET_END \
+#define RET_ENDP \
 	RET; \
-	END
+	ENDP
 
 #define v %ecx
 BEGIN(read)
 	movl  (v), %eax
 	movl 4(v), %edx
-RET_END
+RET_ENDP
 #undef v
 
 #define v %esi
 BEGIN(set)
 	movl %ebx,  (v)
 	movl %ecx, 4(v)
-RET_END
+RET_ENDP
 #undef v
 
 #define v  %esi
@@ -63,14 +65,14 @@ BEGIN(xchg)
 	movl 4(v), %edx
 	movl %ebx,  (v)
 	movl %ecx, 4(v)
-RET_END
+RET_ENDP
 #undef v
 
 #define v %ecx
 BEGIN(add)
 	addl %eax,  (v)
 	adcl %edx, 4(v)
-RET_END
+RET_ENDP
 #undef v
 
 #define v %ecx
@@ -79,14 +81,14 @@ BEGIN(add_return)
 	adcl 4(v), %edx
 	movl %eax,  (v)
 	movl %edx, 4(v)
-RET_END
+RET_ENDP
 #undef v
 
 #define v %ecx
 BEGIN(sub)
 	subl %eax,  (v)
 	sbbl %edx, 4(v)
-RET_END
+RET_ENDP
 #undef v
 
 #define v %ecx
@@ -98,14 +100,14 @@ BEGIN(sub_return)
 	adcl 4(v), %edx
 	movl %eax,  (v)
 	movl %edx, 4(v)
-RET_END
+RET_ENDP
 #undef v
 
 #define v %esi
 BEGIN(inc)
 	addl $1,  (v)
 	adcl $0, 4(v)
-RET_END
+RET_ENDP
 #undef v
 
 #define v %esi
@@ -116,14 +118,14 @@ BEGIN(inc_return)
 	adcl $0, %edx
 	movl %eax,  (v)
 	movl %edx, 4(v)
-RET_END
+RET_ENDP
 #undef v
 
 #define v %esi
 BEGIN(dec)
 	subl $1,  (v)
 	sbbl $0, 4(v)
-RET_END
+RET_ENDP
 #undef v
 
 #define v %esi
@@ -134,7 +136,7 @@ BEGIN(dec_return)
 	sbbl $0, %edx
 	movl %eax,  (v)
 	movl %edx, 4(v)
-RET_END
+RET_ENDP
 #undef v
 
 #define v %ecx
@@ -156,7 +158,7 @@ BEGIN(add_unless)
 	jne 1b
 	xorl %eax, %eax
 	jmp 2b
-END
+ENDP
 #undef v
 
 #define v %esi
@@ -177,7 +179,7 @@ BEGIN(inc_not_zero)
 	testl %edx, %edx
 	jne 1b
 	jmp 2b
-END
+ENDP
 #undef v
 
 #define v %esi
@@ -190,5 +192,5 @@ BEGIN(dec_if_positive)
 	movl %eax,  (v)
 	movl %edx, 4(v)
 1:
-RET_END
+RET_ENDP
 #undef v

Re: [tip:x86/urgent] x86, asm: Refactor atomic64_386_32.S to support old binutils and be cleaner

[D. Stussy]

Has this patch been posted to the 2.6.35 kernel also, or just to 2.6.36?  I don't think it's been posted to 2.6.35 where the problem it corrects was introduced.

"Greg KH" <gregkh@suse.de> has made a last call (tomorrow - Aug 20) for chnges for 2.6.35.3 and doesn't seem to have this.  It's not in the prior two updates either.....

--- On Wed, 8/11/10, tip-bot for Luca Barbieri <luca@luca-barbieri.com> wrote:
> Commit-ID:  30246557a06bb20618bed906a06d1e1e0faa8bb4
> Gitweb:     http://git.kernel.org/tip/30246557a06bb20618bed906a06d1e1e0faa8bb4
> Author:     Luca Barbieri <luca@luca-barbieri.com>
> AuthorDate: Fri, 6 Aug 2010 04:04:38 +0200
> Committer:  H. Peter Anvin <hpa@zytor.com>
> CommitDate: Wed, 11 Aug 2010 21:03:28 -0700
> 
> x86, asm: Refactor atomic64_386_32.S to support old
> binutils and be cleaner
> 
> The old code didn't work on binutils 2.12 because setting a symbol to
> a register apparently requires a fairly recent version.
> 
> ...
> 
> This fixes kernel bugzilla 16506.
...

Re: [tip:x86/urgent] x86, asm: Refactor atomic64_386_32.S to support old binutils and be cleaner

[H. Peter Anvin]

On 08/19/2010 12:06 PM, D. Stussy wrote:
> Has this patch been posted to the 2.6.35 kernel also, or just to 2.6.36?  I don't think it's been posted to 2.6.35 where the problem it corrects was introduced.
> 
> "Greg KH" <gregkh@suse.de> has made a last call (tomorrow - Aug 20) for chnges for 2.6.35.3 and doesn't seem to have this.  It's not in the prior two updates either.....

It was Cc: <stable@kernel.org>; it's up to Greg to include it or not.

[Greg: 30246557a06bb20618bed906a06d1e1e0faa8bb4]

	-hpa

Re: [tip:x86/urgent] x86, asm: Refactor atomic64_386_32.S to support old binutils and be cleaner

[Ingo Molnar]

* H. Peter Anvin <hpa@zytor.com> wrote:

> On 08/19/2010 12:06 PM, D. Stussy wrote:
> > Has this patch been posted to the 2.6.35 kernel also, or just to 2.6.36?  I don't think it's been posted to 2.6.35 where the problem it corrects was introduced.
> > 
> > "Greg KH" <gregkh@suse.de> has made a last call (tomorrow - Aug 20) for chnges for 2.6.35.3 and doesn't seem to have this.  It's not in the prior two updates either.....
> 
> It was Cc: <stable@kernel.org>; it's up to Greg to include it or not.

I think Greg generally includes all upstream commits marked with a -stable tag 
- except if it wont apply cleanly, in which case he mails for a backport.

It of course has to fit in the regular stable release cycle, so the patches 
dont propagate instantaneously.

Thanks,

	Ingo

[tip:x86/bios] x86, bios: By default, reserve the low 64K for all BIOSes

[tip-bot for H. Peter Anvin]

Commit-ID:  d0cd7425fab774a480cce17c2f649984312d0b55
Gitweb:     http://git.kernel.org/tip/d0cd7425fab774a480cce17c2f649984312d0b55
Author:     H. Peter Anvin <hpa@linux.intel.com>
AuthorDate: Tue, 24 Aug 2010 17:32:04 -0700
Committer:  H. Peter Anvin <hpa@linux.intel.com>
CommitDate: Tue, 24 Aug 2010 17:32:04 -0700

x86, bios: By default, reserve the low 64K for all BIOSes

The laundry list of BIOSes that need the low 64K reserved is getting
very long, so make it the default across all BIOSes.  This also allows
the code to be simplified and unified with the reservation code for
the first 4K.

This resolves kernel bugzilla 16661 and who knows what else...

Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
LKML-Reference: <tip-*@git.kernel.org>
---
 arch/x86/Kconfig        |   47 +++++++++++++++----------
 arch/x86/kernel/setup.c |   84 ++++-------------------------------------------
 2 files changed, 35 insertions(+), 96 deletions(-)

diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index cea0cd9..683ae8f 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -1326,25 +1326,34 @@ config X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK
 	  Set whether the default state of memory_corruption_check is
 	  on or off.
 
-config X86_RESERVE_LOW_64K
-	bool "Reserve low 64K of RAM on AMI/Phoenix BIOSen"
-	default y
-	---help---
-	  Reserve the first 64K of physical RAM on BIOSes that are known
-	  to potentially corrupt that memory range. A numbers of BIOSes are
-	  known to utilize this area during suspend/resume, so it must not
-	  be used by the kernel.
-
-	  Set this to N if you are absolutely sure that you trust the BIOS
-	  to get all its memory reservations and usages right.
-
-	  If you have doubts about the BIOS (e.g. suspend/resume does not
-	  work or there's kernel crashes after certain hardware hotplug
-	  events) and it's not AMI or Phoenix, then you might want to enable
-	  X86_CHECK_BIOS_CORRUPTION=y to allow the kernel to check typical
-	  corruption patterns.
-
-	  Say Y if unsure.
+config X86_LOW_RESERVE
+	int "Amount of low memory, in kilobytes, to reserve for the BIOS"
+	default 64
+	range 4 640
+	---help---
+	  Specify the amount of low memory to reserve for the BIOS.
+
+	  The first page contains BIOS data structures that the kernel
+	  must not use, so that page must always be reserved.
+
+	  By default we reserve the first 64K of physical RAM, as a
+	  number of BIOSes are known to corrupt that memory range
+	  during events such as suspend/resume or monitor cable
+	  insertion, so it must not be used by the kernel.
+
+	  You can set this to 4 if you are absolutely sure that you
+	  trust the BIOS to get all its memory reservations and usages
+	  right.  If you know your BIOS have problems beyond the
+	  default 64K area, you can set this to 640 to avoid using the
+	  entire low memory range.
+
+	  If you have doubts about the BIOS (e.g. suspend/resume does
+	  not work or there's kernel crashes after certain hardware
+	  hotplug events) then you might want to enable
+	  X86_CHECK_BIOS_CORRUPTION=y to allow the kernel to check
+	  typical corruption patterns.
+
+	  Leave this to the default value of 64 if you are unsure.
 
 config MATH_EMULATION
 	bool
diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c
index c3a4fbb..eb87f1c 100644
--- a/arch/x86/kernel/setup.c
+++ b/arch/x86/kernel/setup.c
@@ -618,88 +618,20 @@ static __init void reserve_ibft_region(void)
 		reserve_early_overlap_ok(addr, addr + size, "ibft");
 }
 
-#ifdef CONFIG_X86_RESERVE_LOW_64K
-static int __init dmi_low_memory_corruption(const struct dmi_system_id *d)
-{
-	printk(KERN_NOTICE
-		"%s detected: BIOS may corrupt low RAM, working around it.\n",
-		d->ident);
-
-	e820_update_range(0, 0x10000, E820_RAM, E820_RESERVED);
-	sanitize_e820_map(e820.map, ARRAY_SIZE(e820.map), &e820.nr_map);
-
-	return 0;
-}
-#endif
-
-/* List of systems that have known low memory corruption BIOS problems */
-static struct dmi_system_id __initdata bad_bios_dmi_table[] = {
-#ifdef CONFIG_X86_RESERVE_LOW_64K
-	{
-		.callback = dmi_low_memory_corruption,
-		.ident = "AMI BIOS",
-		.matches = {
-			DMI_MATCH(DMI_BIOS_VENDOR, "American Megatrends Inc."),
-		},
-	},
-	{
-		.callback = dmi_low_memory_corruption,
-		.ident = "Phoenix BIOS",
-		.matches = {
-			DMI_MATCH(DMI_BIOS_VENDOR, "Phoenix Technologies"),
-		},
-	},
-	{
-		.callback = dmi_low_memory_corruption,
-		.ident = "Phoenix/MSC BIOS",
-		.matches = {
-			DMI_MATCH(DMI_BIOS_VENDOR, "Phoenix/MSC"),
-		},
-	},
-	/*
-	 * AMI BIOS with low memory corruption was found on Intel DG45ID and
-	 * DG45FC boards.
-	 * It has a different DMI_BIOS_VENDOR = "Intel Corp.", for now we will
-	 * match only DMI_BOARD_NAME and see if there is more bad products
-	 * with this vendor.
-	 */
-	{
-		.callback = dmi_low_memory_corruption,
-		.ident = "AMI BIOS",
-		.matches = {
-			DMI_MATCH(DMI_BOARD_NAME, "DG45ID"),
-		},
-	},
-	{
-		.callback = dmi_low_memory_corruption,
-		.ident = "AMI BIOS",
-		.matches = {
-			DMI_MATCH(DMI_BOARD_NAME, "DG45FC"),
-		},
-	},
-	/*
-	 * The Dell Inspiron Mini 1012 has DMI_BIOS_VENDOR = "Dell Inc.", so
-	 * match on the product name.
-	 */
-	{
-		.callback = dmi_low_memory_corruption,
-		.ident = "Phoenix BIOS",
-		.matches = {
-			DMI_MATCH(DMI_PRODUCT_NAME, "Inspiron 1012"),
-		},
-	},
-#endif
-	{}
-};
-
 static void __init trim_bios_range(void)
 {
 	/*
 	 * A special case is the first 4Kb of memory;
 	 * This is a BIOS owned area, not kernel ram, but generally
 	 * not listed as such in the E820 table.
+	 *
+	 * This typically reserves additional memory (64KiB by default)
+	 * since some BIOSes are known to corrupt low memory.  See the
+	 * Kconfig help text for X86_LOW_RESERVE.
 	 */
-	e820_update_range(0, PAGE_SIZE, E820_RAM, E820_RESERVED);
+	e820_update_range(0, ALIGN(CONFIG_X86_LOW_RESERVE << 10, PAGE_SIZE),
+			  E820_RAM, E820_RESERVED);
+
 	/*
 	 * special case: Some BIOSen report the PC BIOS
 	 * area (640->1Mb) as ram even though it is not.
@@ -863,8 +795,6 @@ void __init setup_arch(char **cmdline_p)
 
 	dmi_scan_machine();
 
-	dmi_check_system(bad_bios_dmi_table);
-
 	/*
 	 * VMware detection requires dmi to be available, so this
 	 * needs to be done after dmi_scan_machine, for the BP.

[tip:x86/bios] x86, bios: Make the x86 early memory reservation a kernel option

[tip-bot for H. Peter Anvin]

Commit-ID:  9ea77bdb39b62c9bf9fd3cdd1c25a9420bccd380
Gitweb:     http://git.kernel.org/tip/9ea77bdb39b62c9bf9fd3cdd1c25a9420bccd380
Author:     H. Peter Anvin <hpa@linux.intel.com>
AuthorDate: Wed, 25 Aug 2010 16:38:20 -0700
Committer:  H. Peter Anvin <hpa@linux.intel.com>
CommitDate: Wed, 25 Aug 2010 17:10:49 -0700

x86, bios: Make the x86 early memory reservation a kernel option

Add a kernel command-line option so the x86 early memory reservation
size can be adjusted at runtime instead of only at compile time.

Suggested-by: Andrew Morton <akpm@linux-foundation.org>
LKML-Reference: <tip-d0cd7425fab774a480cce17c2f649984312d0b55@git.kernel.org>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
---
 Documentation/kernel-parameters.txt |    5 +++++
 arch/x86/Kconfig                    |    2 +-
 arch/x86/kernel/setup.c             |   28 ++++++++++++++++++++++++++--
 3 files changed, 32 insertions(+), 3 deletions(-)

diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index 2c85c06..41ce93e 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -2150,6 +2150,11 @@ and is between 256 and 4096 characters. It is defined in the file
 			Reserves a hole at the top of the kernel virtual
 			address space.
 
+	reservelow=	[X86]
+			Format: nn[K]
+			Set the amount of memory to reserve for BIOS at
+			the bottom of the address space.
+
 	reset_devices	[KNL] Force drivers to reset the underlying device
 			during initialization.
 
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 683ae8f..d359000 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -1326,7 +1326,7 @@ config X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK
 	  Set whether the default state of memory_corruption_check is
 	  on or off.
 
-config X86_LOW_RESERVE
+config X86_RESERVE_LOW
 	int "Amount of low memory, in kilobytes, to reserve for the BIOS"
 	default 64
 	range 4 640
diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c
index eb87f1c..af277e3 100644
--- a/arch/x86/kernel/setup.c
+++ b/arch/x86/kernel/setup.c
@@ -618,6 +618,8 @@ static __init void reserve_ibft_region(void)
 		reserve_early_overlap_ok(addr, addr + size, "ibft");
 }
 
+static unsigned reserve_low = CONFIG_X86_RESERVE_LOW << 10;
+
 static void __init trim_bios_range(void)
 {
 	/*
@@ -627,9 +629,9 @@ static void __init trim_bios_range(void)
 	 *
 	 * This typically reserves additional memory (64KiB by default)
 	 * since some BIOSes are known to corrupt low memory.  See the
-	 * Kconfig help text for X86_LOW_RESERVE.
+	 * Kconfig help text for X86_RESERVE_LOW.
 	 */
-	e820_update_range(0, ALIGN(CONFIG_X86_LOW_RESERVE << 10, PAGE_SIZE),
+	e820_update_range(0, ALIGN(reserve_low, PAGE_SIZE),
 			  E820_RAM, E820_RESERVED);
 
 	/*
@@ -641,6 +643,28 @@ static void __init trim_bios_range(void)
 	sanitize_e820_map(e820.map, ARRAY_SIZE(e820.map), &e820.nr_map);
 }
 
+static int __init parse_reservelow(char *p)
+{
+	unsigned long long size;
+
+	if (!p)
+		return -EINVAL;
+
+	size = memparse(p, &p);
+
+	if (size < 4096)
+		size = 4096;
+
+	if (size > 640*1024)
+		size = 640*1024;
+
+	reserve_low = size;
+
+	return 0;
+}
+
+early_param("reservelow", parse_reservelow);
+
 /*
  * Determine if we were loaded by an EFI loader.  If so, then we have also been
  * passed the efi memmap, systab, etc., so we should use these data structures

[tip:x86/idle] x86, mwait: Move mwait constants to a common header file

[tip-bot for H. Peter Anvin]

Commit-ID:  bc83cccc761953f878088cdfa682de0970b5561f
Gitweb:     http://git.kernel.org/tip/bc83cccc761953f878088cdfa682de0970b5561f
Author:     H. Peter Anvin <hpa@linux.intel.com>
AuthorDate: Fri, 17 Sep 2010 15:36:40 -0700
Committer:  H. Peter Anvin <hpa@linux.intel.com>
CommitDate: Fri, 17 Sep 2010 15:36:40 -0700

x86, mwait: Move mwait constants to a common header file

We have MWAIT constants spread across three different .c files, for no
good reason.  Move them all into a common header file.

Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Reviewed-by: Arjan van de Ven <arjan@linux.intel.com>
Cc: Len Brown <lenb@kernel.org>
LKML-Reference: <tip-*@git.kernel.org>
---
 arch/x86/include/asm/mwait.h  |   15 +++++++++++++++
 arch/x86/kernel/acpi/cstate.c |   11 +----------
 drivers/acpi/acpi_pad.c       |    7 +------
 drivers/idle/intel_idle.c     |    9 +--------
 4 files changed, 18 insertions(+), 24 deletions(-)

diff --git a/arch/x86/include/asm/mwait.h b/arch/x86/include/asm/mwait.h
new file mode 100644
index 0000000..bcdff99
--- /dev/null
+++ b/arch/x86/include/asm/mwait.h
@@ -0,0 +1,15 @@
+#ifndef _ASM_X86_MWAIT_H
+#define _ASM_X86_MWAIT_H
+
+#define MWAIT_SUBSTATE_MASK		0xf
+#define MWAIT_CSTATE_MASK		0xf
+#define MWAIT_SUBSTATE_SIZE		4
+#define MWAIT_MAX_NUM_CSTATES		8
+
+#define CPUID_MWAIT_LEAF		5
+#define CPUID5_ECX_EXTENSIONS_SUPPORTED 0x1
+#define CPUID5_ECX_INTERRUPT_BREAK	0x2
+
+#define MWAIT_ECX_INTERRUPT_BREAK	0x1
+
+#endif /* _ASM_X86_MWAIT_H */
diff --git a/arch/x86/kernel/acpi/cstate.c b/arch/x86/kernel/acpi/cstate.c
index fb7a5f0..bcc4add 100644
--- a/arch/x86/kernel/acpi/cstate.c
+++ b/arch/x86/kernel/acpi/cstate.c
@@ -13,6 +13,7 @@
 
 #include <acpi/processor.h>
 #include <asm/acpi.h>
+#include <asm/mwait.h>
 
 /*
  * Initialize bm_flags based on the CPU cache properties
@@ -65,16 +66,6 @@ static struct cstate_entry *cpu_cstate_entry;	/* per CPU ptr */
 
 static short mwait_supported[ACPI_PROCESSOR_MAX_POWER];
 
-#define MWAIT_SUBSTATE_MASK	(0xf)
-#define MWAIT_CSTATE_MASK	(0xf)
-#define MWAIT_SUBSTATE_SIZE	(4)
-
-#define CPUID_MWAIT_LEAF (5)
-#define CPUID5_ECX_EXTENSIONS_SUPPORTED (0x1)
-#define CPUID5_ECX_INTERRUPT_BREAK	(0x2)
-
-#define MWAIT_ECX_INTERRUPT_BREAK	(0x1)
-
 #define NATIVE_CSTATE_BEYOND_HALT	(2)
 
 static long acpi_processor_ffh_cstate_probe_cpu(void *_cx)
diff --git a/drivers/acpi/acpi_pad.c b/drivers/acpi/acpi_pad.c
index b76848c..ca2694d 100644
--- a/drivers/acpi/acpi_pad.c
+++ b/drivers/acpi/acpi_pad.c
@@ -30,18 +30,13 @@
 #include <linux/slab.h>
 #include <acpi/acpi_bus.h>
 #include <acpi/acpi_drivers.h>
+#include <asm/mwait.h>
 
 #define ACPI_PROCESSOR_AGGREGATOR_CLASS	"acpi_pad"
 #define ACPI_PROCESSOR_AGGREGATOR_DEVICE_NAME "Processor Aggregator"
 #define ACPI_PROCESSOR_AGGREGATOR_NOTIFY 0x80
 static DEFINE_MUTEX(isolated_cpus_lock);
 
-#define MWAIT_SUBSTATE_MASK	(0xf)
-#define MWAIT_CSTATE_MASK	(0xf)
-#define MWAIT_SUBSTATE_SIZE	(4)
-#define CPUID_MWAIT_LEAF (5)
-#define CPUID5_ECX_EXTENSIONS_SUPPORTED (0x1)
-#define CPUID5_ECX_INTERRUPT_BREAK	(0x2)
 static unsigned long power_saving_mwait_eax;
 
 static unsigned char tsc_detected_unstable;
diff --git a/drivers/idle/intel_idle.c b/drivers/idle/intel_idle.c
index a10152b..065c804 100755
--- a/drivers/idle/intel_idle.c
+++ b/drivers/idle/intel_idle.c
@@ -59,18 +59,11 @@
 #include <linux/hrtimer.h>	/* ktime_get_real() */
 #include <trace/events/power.h>
 #include <linux/sched.h>
+#include <asm/mwait.h>
 
 #define INTEL_IDLE_VERSION "0.4"
 #define PREFIX "intel_idle: "
 
-#define MWAIT_SUBSTATE_MASK	(0xf)
-#define MWAIT_CSTATE_MASK	(0xf)
-#define MWAIT_SUBSTATE_SIZE	(4)
-#define MWAIT_MAX_NUM_CSTATES	8
-#define CPUID_MWAIT_LEAF (5)
-#define CPUID5_ECX_EXTENSIONS_SUPPORTED (0x1)
-#define CPUID5_ECX_INTERRUPT_BREAK	(0x2)
-
 static struct cpuidle_driver intel_idle_driver = {
 	.name = "intel_idle",
 	.owner = THIS_MODULE,