* RE: add Honeywell hmc5843 3-Axis Magnetometer (digital compass) driver. [not found] <0680EC522D0CC943BC586913CF3768C003B3553F73@dbde02.ent.ti.com> @ 2010-06-25 13:32 ` Datta, Shubhrajyoti 2010-06-25 15:07 ` Jonathan Cameron 2010-06-30 18:24 ` [RFC][PATCH]add " Datta, Shubhrajyoti 1 sibling, 1 reply; 6+ messages in thread From: Datta, Shubhrajyoti @ 2010-06-25 13:32 UTC (permalink / raw) To: linux-input@vger.kernel.org, linux-kernel@vger.kernel.org Cc: sfking@fdwdc.com > Steven King - 2009-12-11 06:50:12 > Signed-off-by: Steven King <sfking@fdwdc.com> > > --- > > drivers/input/misc/Kconfig | 10 + > drivers/input/misc/Makefile | 1 + > drivers/input/misc/hmc5843.c | 515 > ++++++++++++++++++++++++++++++++++++++++++ > 3 files changed, 526 insertions(+), 0 deletions(-) > create mode 100644 drivers/input/misc/hmc5843.c > > -- > To unsubscribe from this list: send the line "unsubscribe linux-kernel" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html > Please read the FAQ at http://www.tux.org/lkml/ > Jonathan Cameron - 2009-12-11 12:45:24 > Dear Steven, > > Mostly looks good to me. Couple of minor comments inline below. > > I'd also like to see some documentation for this chip. We don't really > want people to have to read the data sheet in order to find out what the > various modes and frequency settings are for example. Datasheets have > a nasty habit of disappearing in the long run. Probably needs something > in Documentation directory rather than merely comments in the code. > > Only one I'm really fussy about is making sure you use the unsigned > strict_strtoul where appropriate. Fix that and you can add > Acked-by: Jonathan Cameron <jic23@cam.ac.uk> > > I'm not entirely convinced this one should be in input as I can't really > believe > it is commonly used as an input device? Over to Dmitry and others for > that > though. We can always move it at a later date. The requirements of a > chip > this simple (interface wise) would make that trivial. So can we recommend it in drivers/misc with input interface. > > Jonathan > > Signed-off-by: Steven King <sfking@fdwdc.com> > > > > --- > > > > drivers/input/misc/Kconfig | 10 + > > drivers/input/misc/Makefile | 1 + > > drivers/input/misc/hmc5843.c | 515 > ++++++++++++++++++++++++++++++++++++++++++ > > 3 files changed, 526 insertions(+), 0 deletions(-) > > create mode 100644 drivers/input/misc/hmc5843.c > > > > diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig > > index a9bb254..7564b96 100644 > > --- a/drivers/input/misc/Kconfig > > +++ b/drivers/input/misc/Kconfig > > @@ -317,4 +317,14 @@ config INPUT_PCAP > > To compile this driver as a module, choose M here: the > > module will be called pcap_keys. > > > > +config INPUT_HMC5843 > > + tristate "Honeywell HMC5843 3-Axis Magnetometer" > > + depends on I2C && SYSFS > > + select INPUT_POLLDEV > > + help > > + Say Y here to add support for the Honeywell HMC 5843 3-Axis > > + Magnetometer (digital compass). > > + > > + To compile this driver as a module, choose M here: the module > > + will be called hmc5843. > > endif > > diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile > > index a8b8485..825b70c 100644 > > --- a/drivers/input/misc/Makefile > > +++ b/drivers/input/misc/Makefile > > @@ -30,4 +30,5 @@ obj-$(CONFIG_INPUT_WINBOND_CIR) += winbond- > cir.o > > obj-$(CONFIG_INPUT_WISTRON_BTNS) += wistron_btns.o > > obj-$(CONFIG_INPUT_WM831X_ON) += wm831x-on.o > > obj-$(CONFIG_INPUT_YEALINK) += yealink.o > > +obj-$(CONFIG_INPUT_HMC5843) += hmc5843.o > > > > diff --git a/drivers/input/misc/hmc5843.c b/drivers/input/misc/hmc5843.c > > new file mode 100644 > > index 0000000..51bb86c > > --- /dev/null > > +++ b/drivers/input/misc/hmc5843.c > > @@ -0,0 +1,515 @@ > > +/* > > + * Driver for the Honeywell HMC5843 3-Axis Magnetometer. > > + * > > + * Author: Steven King <sfking@fdwdc.com> > > + * > > + * This program is free software; you can redistribute it and/or modify > > + * it under the terms of the GNU General Public License as published by > > + * the Free Software Foundation; either version 2 of the License, or > > + * (at your option) any later version. > > + * > > + * This program is distributed in the hope that it will be useful, > > + * but WITHOUT ANY WARRANTY; without even the implied warranty of > > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > > + * GNU General Public License for more details. > > + * > > + * You should have received a copy of the GNU General Public License > > + * along with this program; if not, write to the Free Software > > + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 > USA > > + */ > > + > > +#include <linux/kernel.h> > > +#include <linux/module.h> > > +#include <linux/jiffies.h> > > +#include <linux/err.h> > > +#include <linux/i2c.h> > > +#include <linux/input-polldev.h> > > + > > +#define HMC5843_CFG_A_REG 0 > > +#define HMC5843_CFG_A_BIAS_MASK 0x03 > > +#define HMC5843_CFG_A_RATE_MASK 0x1c > > +#define HMC5843_CFG_A_RATE_SHIFT 2 > > +#define HMC5843_CFG_B_REG 1 > > +#define MMC5843_CFG_B_GAIN_MASK 0xe0 > > +#define MMC5843_CFG_B_GAIN_SHIFT 5 > > +#define HMC5843_MODE_REG 2 > > +#define HMC5843_MODE_REPEAT 0 > > +#define HMC5843_MODE_ONCE 1 > > +#define HMC5843_MODE_IDLE 2 > > +#define HMC5843_MODE_SLEEP 3 > > +#define HMC5843_X_DATA_REG 3 > > +#define HMC5843_Y_DATA_REG 5 > > +#define HMC5843_Z_DATA_REG 7 > > +#define HMC5843_STATUS_REG 9 > > +#define HMC5843_STATUS_REN 0x04 > > +#define HMC5843_STATUS_LOCK 0x02 > > +#define HMC5843_STATUS_RDY 0x01 > > +#define HMC5843_ID_REG_A 10 > > +#define HMC5843_ID_REG_B 11 > > +#define HMC5843_ID_REG_C 12 > > +#define HMC5843_LAST_REG 12 > > +#define HMC5843_NUM_REG 13 > > + > > +struct hmc5843 { > > + struct i2c_client *client; > > + struct mutex lock; > > + struct input_polled_dev *ipdev; > Size is of this is rather large given it can only be 0,1,2. U8 would > make more sense. Same is true of the other elements here. It's a small > saving, but why bloat the kernel for no gain? > > + int bias; > > + int gain; > rate is only between 0 and 6 so again U8. On this element, might it be > better to go with meaningful readings rather than an index? Not sure what > similar drivers do. > > + int rate; > > > + int mode; > > + int index; > > +}; > > + > > +/* interval between samples for the different rates, in msecs */ > > +static const unsigned int hmc5843_sample_interval[] = { > > + 1000 * 2, 1000, 1000 / 2, 1000 / 5, > > + 1000 / 10, 1000 / 20, 1000 / 50, > > +}; > > + > > +/* > > + * From the datasheet: > > + * > > + * The devices uses an address pointer to indicate which register > location is > > + * to be read from or written to. These pointer locations are sent from > the > > + * master to this slave device and succeed the 7-bit address plus 1 bit > > + * read/write identifier. > > + * > > + * To minimize the communication between the master and this device, > the > > + * address pointer updated automatically without master intervention. > This > > + * automatic address pointer update has two additional features. First > when > > + * address 12 or higher is accessed the pointer updates to address 00 > and > > + * secondly when address 09 is reached, the pointer rolls back to > address 03. > > + * Logically, the address pointer operation functions as shown below. > > + * > > + * If (address pointer = 09) then address pointer = 03 > > + * Else if (address pointer >= 12) then address pointer = 0 > > + * Else (address pointer) = (address pointer) + 1 > > + * > > + * Since the set of operations performed by this driver is pretty > simple, > > + * we keep track of the register being written to when updating the > > + * configuration and when reading data only update the address ptr when > its not > > + * pointing to the first data register. > > +*/ > > + > > +static int hmc5843_write_register(struct hmc5843 *hmc5843, int index) > > +{ > > + u8 buf[2]; > > + int result; > > + > > + buf[0] = index; > A switch statement might make this easier to read. > > + if (index == HMC5843_CFG_A_REG) > > + buf[1] = hmc5843->bias | > > + (hmc5843->rate << HMC5843_CFG_A_RATE_SHIFT); > > + else if (index == HMC5843_CFG_B_REG) > > + buf[1] = hmc5843->gain << MMC5843_CFG_B_GAIN_SHIFT; > > + else if (index == HMC5843_MODE_REG) > > + buf[1] = hmc5843->mode; > > + else > > + return -EINVAL; > > + result = i2c_master_send(hmc5843->client, buf, sizeof(buf)); > > + > Blank line here is a bit unconventional. (feel free to ignore this sort of > comment!) > > + if (result != 2) { > > + hmc5843->index = -1; > > + return result; > > + } > > + hmc5843->index = index + 1; > Fussy formatting puts a blank line here. > > + return 0; > > +} > > + > > +static int hmc5843_read_xyz(struct hmc5843 *hmc5843, int *x, int *y, > int *z) > > +{ > > + struct i2c_msg msgs[2]; > > + u8 buf[6]; > > + int n = 0; > > + int result; > > + > > + if (hmc5843->index != HMC5843_X_DATA_REG) { > > + buf[0] = HMC5843_X_DATA_REG; > > + > > + msgs[0].addr = hmc5843->client->addr; > > + msgs[0].flags = 0; > > + msgs[0].buf = buf; > > + msgs[0].len = 1; > > + > > + hmc5843->index = HMC5843_X_DATA_REG; > > + n = 1; > > + } > > + msgs[n].addr = hmc5843->client->addr; > > + msgs[n].flags = I2C_M_RD; > > + msgs[n].buf = buf; > > + msgs[n].len = 6; > > + ++n; > > + > > + result = i2c_transfer(hmc5843->client->adapter, msgs, n); > > + if (result != n) { > > + hmc5843->index = -1; > > + return result; > > + } > > + > > + *x = (((int)((s8)buf[0])) << 8) | buf[1]; > > + *y = (((int)((s8)buf[2])) << 8) | buf[3]; > > + *z = (((int)((s8)buf[4])) << 8) | buf[5]; > > + return 0; > > +} > > + > > +/* sysfs stuff */ > > + > > +/* bias */ > > +static ssize_t hmc5843_show_bias(struct device *dev, > > + struct device_attribute *attr, > > + char *buf) > > +{ > > + struct i2c_client *client = to_i2c_client(dev); > > + struct hmc5843 *hmc5843 = i2c_get_clientdata(client); > > + > > + return sprintf(buf, "%d\n", hmc5843->bias); > > +} > > + > > +static ssize_t hmc5843_store_bias(struct device *dev, > > + struct device_attribute *attr, > > + const char *buf, size_t count) > > +{ > > + struct i2c_client *client = to_i2c_client(dev); > > + struct hmc5843 *hmc5843 = i2c_get_clientdata(client); > > + unsigned long val; > > + int status = count; > > + > > + if ((strict_strtol(buf, 10, &val) < 0) || (val > 2)) > > + return -EINVAL; > > + mutex_lock(&hmc5843->lock); > > + if (hmc5843->bias != val) { > > + hmc5843->bias = val; > > + status = hmc5843_write_register(hmc5843, HMC5843_CFG_A_REG); > > + } > > + mutex_unlock(&hmc5843->lock); > > + return status; > > +} > > + > > +static DEVICE_ATTR(bias, S_IWUSR | S_IRUGO, hmc5843_show_bias, > > + hmc5843_store_bias); > > + > > +/* rate */ > > +static ssize_t hmc5843_show_rate(struct device *dev, > > + struct device_attribute *attr, > > + char *buf) > > +{ > > + struct i2c_client *client = to_i2c_client(dev); > > + struct hmc5843 *hmc5843 = i2c_get_clientdata(client); > > + > > + return sprintf(buf, "%d\n", hmc5843->rate); > > +} > > + > > +static ssize_t hmc5843_store_rate(struct device *dev, > > + struct device_attribute *attr, > > + const char *buf, size_t count) > > +{ > > + struct i2c_client *client = to_i2c_client(dev); > > + struct hmc5843 *hmc5843 = i2c_get_clientdata(client); > > + unsigned long val; > > + int status = count; > > + if ((strict_strtol(buf, 10, &val) < 0) || (val > 6)) > > + return -EINVAL; > > + mutex_lock(&hmc5843->lock); > > + if (hmc5843->rate != val) { > > + hmc5843->rate = val; > > + hmc5843->ipdev->poll_interval = hmc5843_sample_interval[val]; > > + status = hmc5843_write_register(hmc5843, HMC5843_CFG_A_REG); > > + } > > + mutex_unlock(&hmc5843->lock); > > + return status; > > +} > > + > > +static DEVICE_ATTR(rate, S_IWUSR | S_IRUGO, hmc5843_show_rate, > > + hmc5843_store_rate); > > + > > +/* gain */ > > +static ssize_t hmc5843_show_gain(struct device *dev, > > + struct device_attribute *attr, > > + char *buf) > > +{ > > + struct i2c_client *client = to_i2c_client(dev); > > + struct hmc5843 *hmc5843 = i2c_get_clientdata(client); > > + > > + return sprintf(buf, "%d\n", hmc5843->gain); > > +} > > + > > +static ssize_t hmc5843_store_gain(struct device *dev, > > + struct device_attribute *attr, > > + const char *buf, size_t count) > > +{ > > + struct i2c_client *client = to_i2c_client(dev); > > + struct hmc5843 *hmc5843 = i2c_get_clientdata(client); > > + unsigned long val; > > + int status = count; > You want strict_strtoul as it is unsigned. (probably true elsewhere in > driver > I just noticed it here!) > > + if ((strict_strtol(buf, 10, &val) < 0) || (val > 6)) > > + return -EINVAL; > > + mutex_lock(&hmc5843->lock); > > + if (hmc5843->gain != val) { > > + hmc5843->gain = val; > > + status = hmc5843_write_register(hmc5843, HMC5843_CFG_B_REG); > > + } > > + mutex_unlock(&hmc5843->lock); > > + return status; > > +} > > + > > +static DEVICE_ATTR(gain, S_IWUSR | S_IRUGO, hmc5843_show_gain, > > + hmc5843_store_gain); > > + > > +/* mode */ > > +static ssize_t hmc5843_show_mode(struct device *dev, > > + struct device_attribute *attr, > > + char *buf) > > +{ > > + struct i2c_client *client = to_i2c_client(dev); > > + struct hmc5843 *hmc5843 = i2c_get_clientdata(client); > > + > > + return sprintf(buf, "%d\n", hmc5843->mode); > > +} > > + > > +static ssize_t hmc5843_store_mode(struct device *dev, > > + struct device_attribute *attr, > > + const char *buf, size_t count) > > +{ > > + struct i2c_client *client = to_i2c_client(dev); > > + struct hmc5843 *hmc5843 = i2c_get_clientdata(client); > > + unsigned long val; > > + int status = count; > > + > strict_strtoul > > + if ((strict_strtol(buf, 10, &val) < 0) || (val > 3)) > > + return -EINVAL; > > + mutex_lock(&hmc5843->lock); > > + if (hmc5843->mode != val) { > > + hmc5843->mode = val; > > + status = hmc5843_write_register(hmc5843, HMC5843_MODE_REG); > > + } > > + mutex_unlock(&hmc5843->lock); > > + return status; > > +} > > + > > +static DEVICE_ATTR(mode, S_IWUSR | S_IRUGO, hmc5843_show_mode, > > + hmc5843_store_mode); > > + > > +static struct attribute *hmc5843_attributes[] = { > > + &dev_attr_bias.attr, > > + &dev_attr_rate.attr, > > + &dev_attr_gain.attr, > > + &dev_attr_mode.attr, > > + NULL, > > +}; > > + > > +static const struct attribute_group hmc5843_attr_group = { > > + .attrs = hmc5843_attributes, > > +}; > > + > > +/* use polled input device */ > > + > > +static void hmc5843_poll(struct input_polled_dev *ipdev) > > +{ > > + struct hmc5843 *hmc5843 = ipdev->private; > > + int x, y, z; > > + > > + mutex_lock(&hmc5843->lock); > > + if (!hmc5843_read_xyz(hmc5843, &x, &y, &z)) { > > + input_report_abs(ipdev->input, ABS_X, x); > > + input_report_abs(ipdev->input, ABS_Y, y); > > + input_report_abs(ipdev->input, ABS_Z, z); > > + input_sync(ipdev->input); > > + } > > + mutex_unlock(&hmc5843->lock); > > +} > > + > > +static int __devinit hmc5843_input_init(struct hmc5843 *hmc5843) > > +{ > > + int status; > > + struct input_polled_dev *ipdev; > > + > > + ipdev = input_allocate_polled_device(); > > + if (!ipdev) { > > + dev_dbg(&hmc5843->client->dev, "error creating input > device\n"); > > + return -ENOMEM; > > + } > > + ipdev->poll = hmc5843_poll; > > + ipdev->poll_interval = hmc5843_sample_interval[hmc5843->rate]; > > + ipdev->private = hmc5843; > > + > > + ipdev->input->name = "Honeywell HMC5843 3-Axis Magnetometer"; > > + ipdev->input->phys = "hmc5843/input0"; > > + ipdev->input->id.bustype = BUS_HOST; > > + > > + set_bit(EV_ABS, ipdev->input->evbit); > > + > > + input_set_abs_params(ipdev->input, ABS_X, -2047, 2047, 0, 0); > > + input_set_abs_params(ipdev->input, ABS_Y, -2047, 2047, 0, 0); > > + input_set_abs_params(ipdev->input, ABS_Z, -2047, 2047, 0, 0); > > + > > + status = input_register_polled_device(ipdev); > > + if (status) { > > + dev_dbg(&hmc5843->client->dev, > > + "error registering input device\n"); > > + input_free_polled_device(ipdev); > > + goto exit; > > + } > > + hmc5843->ipdev = ipdev; > > +exit: > > + return status; > > +} > > + > > +static int __devinit hmc5843_device_init(struct hmc5843 *hmc5843) > > +{ > > + struct i2c_client *client = hmc5843->client; > > + int status; > > + > > + struct i2c_msg msgs[2]; > > + u8 buf[6] = { HMC5843_ID_REG_A }; /* start reading at 1st id reg */ > > + > > + msgs[0].addr = client->addr; > > + msgs[0].flags = 0; > > + msgs[0].buf = buf; > > + msgs[0].len = 1; > > + msgs[1].addr = client->addr; > > + msgs[1].flags = I2C_M_RD; > > + msgs[1].buf = buf; /* overwrite sent address on read */ > > + msgs[1].len = 6; /* 3 id regs + cfg_a, cfg_b & mode reg */ > > + > > + status = i2c_transfer(client->adapter, msgs, 2); > > + if (status != 2) { > > + dev_dbg(&client->dev, "unable to contact device\n"); > > + return status; > > + } > > + if (strncmp(buf, "H43", 3)) { > > + dev_dbg(&client->dev, "incorrect device id %-3.3s", buf); > > + return -EINVAL; > > + } > > + /* the read will have wrapped to 0, bytes 3-6 are cfg_a, cfg_b, mode > */ > > + hmc5843->bias = buf[3] & HMC5843_CFG_A_BIAS_MASK; > > + hmc5843->rate = buf[3] >> HMC5843_CFG_A_RATE_SHIFT; > > + hmc5843->gain = buf[4] >> MMC5843_CFG_B_GAIN_SHIFT; > > + hmc5843->mode = buf[5]; > > + > > + hmc5843->index = 3; > > + mutex_init(&hmc5843->lock); > > + return 0; > > +} > > + > > +static int __devinit hmc5843_i2c_probe(struct i2c_client *client, > > + const struct i2c_device_id *id) > > +{ > > + int status; > > + struct hmc5843 *hmc5843; > > + > > + if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) { > > + dev_dbg(&client->dev, "adapter doesn't support I2C\n"); > > + return -ENODEV; > > + } > > + > > + hmc5843 = kzalloc(sizeof(*hmc5843), GFP_KERNEL); > > + if (!hmc5843) { > > + dev_dbg(&client->dev, "unable to allocate memory\n"); > > + return -ENOMEM; > > + } > > + > > + hmc5843->client = client; > > + i2c_set_clientdata(client, hmc5843); > > + > > + status = hmc5843_device_init(hmc5843); > > + if (status) > > + goto fail0; > > + > > + status = hmc5843_input_init(hmc5843); > > + if (status) > > + goto fail0; > > + > > + status = sysfs_create_group(&client->dev.kobj, &hmc5843_attr_group); > > + if (status) { > > + dev_dbg(&client->dev, "could not create sysfs files\n"); > > + goto fail1; > > + } > > + return 0; > > +fail1: > > + input_unregister_polled_device(hmc5843->ipdev); > > +fail0: > > + kfree(hmc5843); > > + return status; > > +} > > + > > +static int __devexit hmc5843_i2c_remove(struct i2c_client *client) > > +{ > > + struct hmc5843 *hmc5843 = i2c_get_clientdata(client); > > + > > + sysfs_remove_group(&client->dev.kobj, &hmc5843_attr_group); > > + input_unregister_polled_device(hmc5843->ipdev); > > + i2c_set_clientdata(client, NULL); > > + kfree(hmc5843); > > + return 0; > > +} > > + > > +#ifdef CONFIG_PM > > +static int hmc5843_suspend(struct device *dev) > > +{ > > + struct i2c_client *client = dev_get_drvdata(dev); > > + struct hmc5843 *hmc5843 = i2c_get_clientdata(client); > > + > > + /* save our current mode for resume and put device to sleep */ > > + int m = hmc5843->mode; > Not entirely certain but perhaps need a lock here to prevent user > changing mode just as suspend occurs? I haven't worked out what exactly > happens in that case though. > > + hmc5843->mode = HMC5843_MODE_SLEEP; > > + hmc5843_write_register(hmc5843, HMC5843_MODE_REG); > > + hmc5843->mode = m; > > + return 0; > > +} > > + > > +static int hmc5843_resume(struct device *dev) > > +{ > > + struct i2c_client *client = dev_get_drvdata(dev); > > + struct hmc5843 *hmc5843 = i2c_get_clientdata(client); > > + > > + /* restore whatever mode we were in before suspending */ > > + hmc5843_write_register(hmc5843, HMC5843_MODE_REG); > > + return 0; > > +} > > + > > +static struct dev_pm_ops hmc5843_dev_pm_ops = { > > + .suspend = hmc5843_suspend, > > + .resume = hmc5843_resume, > > +}; > > + > > +#define HMC5843_DEV_PM_OPS (&hmc5843_dev_pm_ops) > > +#else > > +#define HMC5843_DEV_PM_OPS NULL > > +#endif > > + > > +static const struct i2c_device_id hmc5843_id[] = { > > + { "hmc5843", 0 }, > > + { }, > > +}; > > + > > +MODULE_DEVICE_TABLE(i2c, hmc5843_id); > > + > > +static struct i2c_driver hmc5843_i2c_driver = { > > + .driver = { > > + .name = "hmc5843", > > + .owner = THIS_MODULE, > > + .pm = HMC5843_DEV_PM_OPS, > > + }, > > + .probe = hmc5843_i2c_probe, > > + .remove = __devexit_p(hmc5843_i2c_remove), > > + .id_table = hmc5843_id, > > +}; > > + > > +static int __init hmc5843_init(void) > > +{ > > + return i2c_add_driver(&hmc5843_i2c_driver); > > +} > > +module_init(hmc5843_init); > > + > > +static void __exit hmc5843_exit(void) > > +{ > > + i2c_del_driver(&hmc5843_i2c_driver); > > +} > > +module_exit(hmc5843_exit); > > + > > +MODULE_AUTHOR("Steven King <sfking@fdwdc.com>"); > > +MODULE_DESCRIPTION("Honeywell HMC5843 3-Axis Magnetometer driver"); > > +MODULE_LICENSE("GPL"); > > -- > > To unsubscribe from this list: send the line "unsubscribe linux-input" > in > > the body of a message to majordomo@vger.kernel.org > > More majordomo info at http://vger.kernel.org/majordomo-info.html > > > > -- > To unsubscribe from this list: send the line "unsubscribe linux-kernel" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html > Please read the FAQ at http://www.tux.org/lkml/ ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: add Honeywell hmc5843 3-Axis Magnetometer (digital compass) driver. 2010-06-25 13:32 ` add Honeywell hmc5843 3-Axis Magnetometer (digital compass) driver Datta, Shubhrajyoti @ 2010-06-25 15:07 ` Jonathan Cameron 0 siblings, 0 replies; 6+ messages in thread From: Jonathan Cameron @ 2010-06-25 15:07 UTC (permalink / raw) To: Datta, Shubhrajyoti Cc: linux-input@vger.kernel.org, linux-kernel@vger.kernel.org, sfking@fdwdc.com On 06/25/10 14:32, Datta, Shubhrajyoti wrote: > > >> Steven King - 2009-12-11 06:50:12 >> Signed-off-by: Steven King <sfking@fdwdc.com> >> >> --- >> >> drivers/input/misc/Kconfig | 10 + >> drivers/input/misc/Makefile | 1 + >> drivers/input/misc/hmc5843.c | 515 >> ++++++++++++++++++++++++++++++++++++++++++ >> 3 files changed, 526 insertions(+), 0 deletions(-) >> create mode 100644 drivers/input/misc/hmc5843.c >> >> -- >> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in >> the body of a message to majordomo@vger.kernel.org >> More majordomo info at http://vger.kernel.org/majordomo-info.html >> Please read the FAQ at http://www.tux.org/lkml/ >> Jonathan Cameron - 2009-12-11 12:45:24 >> Dear Steven, >> >> Mostly looks good to me. Couple of minor comments inline below. >> >> I'd also like to see some documentation for this chip. We don't really >> want people to have to read the data sheet in order to find out what the >> various modes and frequency settings are for example. Datasheets have >> a nasty habit of disappearing in the long run. Probably needs something >> in Documentation directory rather than merely comments in the code. >> >> Only one I'm really fussy about is making sure you use the unsigned >> strict_strtoul where appropriate. Fix that and you can add >> Acked-by: Jonathan Cameron <jic23@cam.ac.uk> >> >> I'm not entirely convinced this one should be in input as I can't really >> believe >> it is commonly used as an input device? Over to Dmitry and others for >> that >> though. We can always move it at a later date. The requirements of a >> chip >> this simple (interface wise) would make that trivial. > So can we recommend it in drivers/misc with input interface. Not unless you can convince Dmitry this is a typical human input device. He has recently allowed some 3d accelerometers in on the basis that is what many people use them for. Here I for one am unconvinced. Can't see people controlling games or mouse pointer based on a compass. misc with a simple sysfs interface seems most logical to me if you don't want to go with IIO. > >> >> Jonathan >>> Signed-off-by: Steven King <sfking@fdwdc.com> >>> >>> --- >>> >>> drivers/input/misc/Kconfig | 10 + >>> drivers/input/misc/Makefile | 1 + >>> drivers/input/misc/hmc5843.c | 515 >> ++++++++++++++++++++++++++++++++++++++++++ >>> 3 files changed, 526 insertions(+), 0 deletions(-) >>> create mode 100644 drivers/input/misc/hmc5843.c >>> >>> diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig >>> index a9bb254..7564b96 100644 >>> --- a/drivers/input/misc/Kconfig >>> +++ b/drivers/input/misc/Kconfig >>> @@ -317,4 +317,14 @@ config INPUT_PCAP >>> To compile this driver as a module, choose M here: the >>> module will be called pcap_keys. >>> >>> +config INPUT_HMC5843 >>> + tristate "Honeywell HMC5843 3-Axis Magnetometer" >>> + depends on I2C && SYSFS >>> + select INPUT_POLLDEV >>> + help >>> + Say Y here to add support for the Honeywell HMC 5843 3-Axis >>> + Magnetometer (digital compass). >>> + >>> + To compile this driver as a module, choose M here: the module >>> + will be called hmc5843. >>> endif >>> diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile >>> index a8b8485..825b70c 100644 >>> --- a/drivers/input/misc/Makefile >>> +++ b/drivers/input/misc/Makefile >>> @@ -30,4 +30,5 @@ obj-$(CONFIG_INPUT_WINBOND_CIR) += winbond- >> cir.o >>> obj-$(CONFIG_INPUT_WISTRON_BTNS) += wistron_btns.o >>> obj-$(CONFIG_INPUT_WM831X_ON) += wm831x-on.o >>> obj-$(CONFIG_INPUT_YEALINK) += yealink.o >>> +obj-$(CONFIG_INPUT_HMC5843) += hmc5843.o >>> >>> diff --git a/drivers/input/misc/hmc5843.c b/drivers/input/misc/hmc5843.c >>> new file mode 100644 >>> index 0000000..51bb86c >>> --- /dev/null >>> +++ b/drivers/input/misc/hmc5843.c >>> @@ -0,0 +1,515 @@ >>> +/* >>> + * Driver for the Honeywell HMC5843 3-Axis Magnetometer. >>> + * >>> + * Author: Steven King <sfking@fdwdc.com> >>> + * >>> + * This program is free software; you can redistribute it and/or modify >>> + * it under the terms of the GNU General Public License as published by >>> + * the Free Software Foundation; either version 2 of the License, or >>> + * (at your option) any later version. >>> + * >>> + * This program is distributed in the hope that it will be useful, >>> + * but WITHOUT ANY WARRANTY; without even the implied warranty of >>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the >>> + * GNU General Public License for more details. >>> + * >>> + * You should have received a copy of the GNU General Public License >>> + * along with this program; if not, write to the Free Software >>> + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 >> USA >>> + */ >>> + >>> +#include <linux/kernel.h> >>> +#include <linux/module.h> >>> +#include <linux/jiffies.h> >>> +#include <linux/err.h> >>> +#include <linux/i2c.h> >>> +#include <linux/input-polldev.h> >>> + >>> +#define HMC5843_CFG_A_REG 0 >>> +#define HMC5843_CFG_A_BIAS_MASK 0x03 >>> +#define HMC5843_CFG_A_RATE_MASK 0x1c >>> +#define HMC5843_CFG_A_RATE_SHIFT 2 >>> +#define HMC5843_CFG_B_REG 1 >>> +#define MMC5843_CFG_B_GAIN_MASK 0xe0 >>> +#define MMC5843_CFG_B_GAIN_SHIFT 5 >>> +#define HMC5843_MODE_REG 2 >>> +#define HMC5843_MODE_REPEAT 0 >>> +#define HMC5843_MODE_ONCE 1 >>> +#define HMC5843_MODE_IDLE 2 >>> +#define HMC5843_MODE_SLEEP 3 >>> +#define HMC5843_X_DATA_REG 3 >>> +#define HMC5843_Y_DATA_REG 5 >>> +#define HMC5843_Z_DATA_REG 7 >>> +#define HMC5843_STATUS_REG 9 >>> +#define HMC5843_STATUS_REN 0x04 >>> +#define HMC5843_STATUS_LOCK 0x02 >>> +#define HMC5843_STATUS_RDY 0x01 >>> +#define HMC5843_ID_REG_A 10 >>> +#define HMC5843_ID_REG_B 11 >>> +#define HMC5843_ID_REG_C 12 >>> +#define HMC5843_LAST_REG 12 >>> +#define HMC5843_NUM_REG 13 >>> + >>> +struct hmc5843 { >>> + struct i2c_client *client; >>> + struct mutex lock; >>> + struct input_polled_dev *ipdev; >> Size is of this is rather large given it can only be 0,1,2. U8 would >> make more sense. Same is true of the other elements here. It's a small >> saving, but why bloat the kernel for no gain? >>> + int bias; >>> + int gain; >> rate is only between 0 and 6 so again U8. On this element, might it be >> better to go with meaningful readings rather than an index? Not sure what >> similar drivers do. >>> + int rate; >> >>> + int mode; >>> + int index; >>> +}; >>> + >>> +/* interval between samples for the different rates, in msecs */ >>> +static const unsigned int hmc5843_sample_interval[] = { >>> + 1000 * 2, 1000, 1000 / 2, 1000 / 5, >>> + 1000 / 10, 1000 / 20, 1000 / 50, >>> +}; >>> + >>> +/* >>> + * From the datasheet: >>> + * >>> + * The devices uses an address pointer to indicate which register >> location is >>> + * to be read from or written to. These pointer locations are sent from >> the >>> + * master to this slave device and succeed the 7-bit address plus 1 bit >>> + * read/write identifier. >>> + * >>> + * To minimize the communication between the master and this device, >> the >>> + * address pointer updated automatically without master intervention. >> This >>> + * automatic address pointer update has two additional features. First >> when >>> + * address 12 or higher is accessed the pointer updates to address 00 >> and >>> + * secondly when address 09 is reached, the pointer rolls back to >> address 03. >>> + * Logically, the address pointer operation functions as shown below. >>> + * >>> + * If (address pointer = 09) then address pointer = 03 >>> + * Else if (address pointer >= 12) then address pointer = 0 >>> + * Else (address pointer) = (address pointer) + 1 >>> + * >>> + * Since the set of operations performed by this driver is pretty >> simple, >>> + * we keep track of the register being written to when updating the >>> + * configuration and when reading data only update the address ptr when >> its not >>> + * pointing to the first data register. >>> +*/ >>> + >>> +static int hmc5843_write_register(struct hmc5843 *hmc5843, int index) >>> +{ >>> + u8 buf[2]; >>> + int result; >>> + >>> + buf[0] = index; >> A switch statement might make this easier to read. >>> + if (index == HMC5843_CFG_A_REG) >>> + buf[1] = hmc5843->bias | >>> + (hmc5843->rate << HMC5843_CFG_A_RATE_SHIFT); >>> + else if (index == HMC5843_CFG_B_REG) >>> + buf[1] = hmc5843->gain << MMC5843_CFG_B_GAIN_SHIFT; >>> + else if (index == HMC5843_MODE_REG) >>> + buf[1] = hmc5843->mode; >>> + else >>> + return -EINVAL; >>> + result = i2c_master_send(hmc5843->client, buf, sizeof(buf)); >>> + >> Blank line here is a bit unconventional. (feel free to ignore this sort of >> comment!) >>> + if (result != 2) { >>> + hmc5843->index = -1; >>> + return result; >>> + } >>> + hmc5843->index = index + 1; >> Fussy formatting puts a blank line here. >>> + return 0; >>> +} >>> + >>> +static int hmc5843_read_xyz(struct hmc5843 *hmc5843, int *x, int *y, >> int *z) >>> +{ >>> + struct i2c_msg msgs[2]; >>> + u8 buf[6]; >>> + int n = 0; >>> + int result; >>> + >>> + if (hmc5843->index != HMC5843_X_DATA_REG) { >>> + buf[0] = HMC5843_X_DATA_REG; >>> + >>> + msgs[0].addr = hmc5843->client->addr; >>> + msgs[0].flags = 0; >>> + msgs[0].buf = buf; >>> + msgs[0].len = 1; >>> + >>> + hmc5843->index = HMC5843_X_DATA_REG; >>> + n = 1; >>> + } >>> + msgs[n].addr = hmc5843->client->addr; >>> + msgs[n].flags = I2C_M_RD; >>> + msgs[n].buf = buf; >>> + msgs[n].len = 6; >>> + ++n; >>> + >>> + result = i2c_transfer(hmc5843->client->adapter, msgs, n); >>> + if (result != n) { >>> + hmc5843->index = -1; >>> + return result; >>> + } >>> + >>> + *x = (((int)((s8)buf[0])) << 8) | buf[1]; >>> + *y = (((int)((s8)buf[2])) << 8) | buf[3]; >>> + *z = (((int)((s8)buf[4])) << 8) | buf[5]; >>> + return 0; >>> +} >>> + >>> +/* sysfs stuff */ >>> + >>> +/* bias */ >>> +static ssize_t hmc5843_show_bias(struct device *dev, >>> + struct device_attribute *attr, >>> + char *buf) >>> +{ >>> + struct i2c_client *client = to_i2c_client(dev); >>> + struct hmc5843 *hmc5843 = i2c_get_clientdata(client); >>> + >>> + return sprintf(buf, "%d\n", hmc5843->bias); >>> +} >>> + >>> +static ssize_t hmc5843_store_bias(struct device *dev, >>> + struct device_attribute *attr, >>> + const char *buf, size_t count) >>> +{ >>> + struct i2c_client *client = to_i2c_client(dev); >>> + struct hmc5843 *hmc5843 = i2c_get_clientdata(client); >>> + unsigned long val; >>> + int status = count; >>> + >>> + if ((strict_strtol(buf, 10, &val) < 0) || (val > 2)) >>> + return -EINVAL; >>> + mutex_lock(&hmc5843->lock); >>> + if (hmc5843->bias != val) { >>> + hmc5843->bias = val; >>> + status = hmc5843_write_register(hmc5843, HMC5843_CFG_A_REG); >>> + } >>> + mutex_unlock(&hmc5843->lock); >>> + return status; >>> +} >>> + >>> +static DEVICE_ATTR(bias, S_IWUSR | S_IRUGO, hmc5843_show_bias, >>> + hmc5843_store_bias); >>> + >>> +/* rate */ >>> +static ssize_t hmc5843_show_rate(struct device *dev, >>> + struct device_attribute *attr, >>> + char *buf) >>> +{ >>> + struct i2c_client *client = to_i2c_client(dev); >>> + struct hmc5843 *hmc5843 = i2c_get_clientdata(client); >>> + >>> + return sprintf(buf, "%d\n", hmc5843->rate); >>> +} >>> + >>> +static ssize_t hmc5843_store_rate(struct device *dev, >>> + struct device_attribute *attr, >>> + const char *buf, size_t count) >>> +{ >>> + struct i2c_client *client = to_i2c_client(dev); >>> + struct hmc5843 *hmc5843 = i2c_get_clientdata(client); >>> + unsigned long val; >>> + int status = count; >>> + if ((strict_strtol(buf, 10, &val) < 0) || (val > 6)) >>> + return -EINVAL; >>> + mutex_lock(&hmc5843->lock); >>> + if (hmc5843->rate != val) { >>> + hmc5843->rate = val; >>> + hmc5843->ipdev->poll_interval = hmc5843_sample_interval[val]; >>> + status = hmc5843_write_register(hmc5843, HMC5843_CFG_A_REG); >>> + } >>> + mutex_unlock(&hmc5843->lock); >>> + return status; >>> +} >>> + >>> +static DEVICE_ATTR(rate, S_IWUSR | S_IRUGO, hmc5843_show_rate, >>> + hmc5843_store_rate); >>> + >>> +/* gain */ >>> +static ssize_t hmc5843_show_gain(struct device *dev, >>> + struct device_attribute *attr, >>> + char *buf) >>> +{ >>> + struct i2c_client *client = to_i2c_client(dev); >>> + struct hmc5843 *hmc5843 = i2c_get_clientdata(client); >>> + >>> + return sprintf(buf, "%d\n", hmc5843->gain); >>> +} >>> + >>> +static ssize_t hmc5843_store_gain(struct device *dev, >>> + struct device_attribute *attr, >>> + const char *buf, size_t count) >>> +{ >>> + struct i2c_client *client = to_i2c_client(dev); >>> + struct hmc5843 *hmc5843 = i2c_get_clientdata(client); >>> + unsigned long val; >>> + int status = count; >> You want strict_strtoul as it is unsigned. (probably true elsewhere in >> driver >> I just noticed it here!) >>> + if ((strict_strtol(buf, 10, &val) < 0) || (val > 6)) >>> + return -EINVAL; >>> + mutex_lock(&hmc5843->lock); >>> + if (hmc5843->gain != val) { >>> + hmc5843->gain = val; >>> + status = hmc5843_write_register(hmc5843, HMC5843_CFG_B_REG); >>> + } >>> + mutex_unlock(&hmc5843->lock); >>> + return status; >>> +} >>> + >>> +static DEVICE_ATTR(gain, S_IWUSR | S_IRUGO, hmc5843_show_gain, >>> + hmc5843_store_gain); >>> + >>> +/* mode */ >>> +static ssize_t hmc5843_show_mode(struct device *dev, >>> + struct device_attribute *attr, >>> + char *buf) >>> +{ >>> + struct i2c_client *client = to_i2c_client(dev); >>> + struct hmc5843 *hmc5843 = i2c_get_clientdata(client); >>> + >>> + return sprintf(buf, "%d\n", hmc5843->mode); >>> +} >>> + >>> +static ssize_t hmc5843_store_mode(struct device *dev, >>> + struct device_attribute *attr, >>> + const char *buf, size_t count) >>> +{ >>> + struct i2c_client *client = to_i2c_client(dev); >>> + struct hmc5843 *hmc5843 = i2c_get_clientdata(client); >>> + unsigned long val; >>> + int status = count; >>> + >> strict_strtoul >>> + if ((strict_strtol(buf, 10, &val) < 0) || (val > 3)) >>> + return -EINVAL; >>> + mutex_lock(&hmc5843->lock); >>> + if (hmc5843->mode != val) { >>> + hmc5843->mode = val; >>> + status = hmc5843_write_register(hmc5843, HMC5843_MODE_REG); >>> + } >>> + mutex_unlock(&hmc5843->lock); >>> + return status; >>> +} >>> + >>> +static DEVICE_ATTR(mode, S_IWUSR | S_IRUGO, hmc5843_show_mode, >>> + hmc5843_store_mode); >>> + >>> +static struct attribute *hmc5843_attributes[] = { >>> + &dev_attr_bias.attr, >>> + &dev_attr_rate.attr, >>> + &dev_attr_gain.attr, >>> + &dev_attr_mode.attr, >>> + NULL, >>> +}; >>> + >>> +static const struct attribute_group hmc5843_attr_group = { >>> + .attrs = hmc5843_attributes, >>> +}; >>> + >>> +/* use polled input device */ >>> + >>> +static void hmc5843_poll(struct input_polled_dev *ipdev) >>> +{ >>> + struct hmc5843 *hmc5843 = ipdev->private; >>> + int x, y, z; >>> + >>> + mutex_lock(&hmc5843->lock); >>> + if (!hmc5843_read_xyz(hmc5843, &x, &y, &z)) { >>> + input_report_abs(ipdev->input, ABS_X, x); >>> + input_report_abs(ipdev->input, ABS_Y, y); >>> + input_report_abs(ipdev->input, ABS_Z, z); >>> + input_sync(ipdev->input); >>> + } >>> + mutex_unlock(&hmc5843->lock); >>> +} >>> + >>> +static int __devinit hmc5843_input_init(struct hmc5843 *hmc5843) >>> +{ >>> + int status; >>> + struct input_polled_dev *ipdev; >>> + >>> + ipdev = input_allocate_polled_device(); >>> + if (!ipdev) { >>> + dev_dbg(&hmc5843->client->dev, "error creating input >> device\n"); >>> + return -ENOMEM; >>> + } >>> + ipdev->poll = hmc5843_poll; >>> + ipdev->poll_interval = hmc5843_sample_interval[hmc5843->rate]; >>> + ipdev->private = hmc5843; >>> + >>> + ipdev->input->name = "Honeywell HMC5843 3-Axis Magnetometer"; >>> + ipdev->input->phys = "hmc5843/input0"; >>> + ipdev->input->id.bustype = BUS_HOST; >>> + >>> + set_bit(EV_ABS, ipdev->input->evbit); >>> + >>> + input_set_abs_params(ipdev->input, ABS_X, -2047, 2047, 0, 0); >>> + input_set_abs_params(ipdev->input, ABS_Y, -2047, 2047, 0, 0); >>> + input_set_abs_params(ipdev->input, ABS_Z, -2047, 2047, 0, 0); >>> + >>> + status = input_register_polled_device(ipdev); >>> + if (status) { >>> + dev_dbg(&hmc5843->client->dev, >>> + "error registering input device\n"); >>> + input_free_polled_device(ipdev); >>> + goto exit; >>> + } >>> + hmc5843->ipdev = ipdev; >>> +exit: >>> + return status; >>> +} >>> + >>> +static int __devinit hmc5843_device_init(struct hmc5843 *hmc5843) >>> +{ >>> + struct i2c_client *client = hmc5843->client; >>> + int status; >>> + >>> + struct i2c_msg msgs[2]; >>> + u8 buf[6] = { HMC5843_ID_REG_A }; /* start reading at 1st id reg */ >>> + >>> + msgs[0].addr = client->addr; >>> + msgs[0].flags = 0; >>> + msgs[0].buf = buf; >>> + msgs[0].len = 1; >>> + msgs[1].addr = client->addr; >>> + msgs[1].flags = I2C_M_RD; >>> + msgs[1].buf = buf; /* overwrite sent address on read */ >>> + msgs[1].len = 6; /* 3 id regs + cfg_a, cfg_b & mode reg */ >>> + >>> + status = i2c_transfer(client->adapter, msgs, 2); >>> + if (status != 2) { >>> + dev_dbg(&client->dev, "unable to contact device\n"); >>> + return status; >>> + } >>> + if (strncmp(buf, "H43", 3)) { >>> + dev_dbg(&client->dev, "incorrect device id %-3.3s", buf); >>> + return -EINVAL; >>> + } >>> + /* the read will have wrapped to 0, bytes 3-6 are cfg_a, cfg_b, mode >> */ >>> + hmc5843->bias = buf[3] & HMC5843_CFG_A_BIAS_MASK; >>> + hmc5843->rate = buf[3] >> HMC5843_CFG_A_RATE_SHIFT; >>> + hmc5843->gain = buf[4] >> MMC5843_CFG_B_GAIN_SHIFT; >>> + hmc5843->mode = buf[5]; >>> + >>> + hmc5843->index = 3; >>> + mutex_init(&hmc5843->lock); >>> + return 0; >>> +} >>> + >>> +static int __devinit hmc5843_i2c_probe(struct i2c_client *client, >>> + const struct i2c_device_id *id) >>> +{ >>> + int status; >>> + struct hmc5843 *hmc5843; >>> + >>> + if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) { >>> + dev_dbg(&client->dev, "adapter doesn't support I2C\n"); >>> + return -ENODEV; >>> + } >>> + >>> + hmc5843 = kzalloc(sizeof(*hmc5843), GFP_KERNEL); >>> + if (!hmc5843) { >>> + dev_dbg(&client->dev, "unable to allocate memory\n"); >>> + return -ENOMEM; >>> + } >>> + >>> + hmc5843->client = client; >>> + i2c_set_clientdata(client, hmc5843); >>> + >>> + status = hmc5843_device_init(hmc5843); >>> + if (status) >>> + goto fail0; >>> + >>> + status = hmc5843_input_init(hmc5843); >>> + if (status) >>> + goto fail0; >>> + >>> + status = sysfs_create_group(&client->dev.kobj, &hmc5843_attr_group); >>> + if (status) { >>> + dev_dbg(&client->dev, "could not create sysfs files\n"); >>> + goto fail1; >>> + } >>> + return 0; >>> +fail1: >>> + input_unregister_polled_device(hmc5843->ipdev); >>> +fail0: >>> + kfree(hmc5843); >>> + return status; >>> +} >>> + >>> +static int __devexit hmc5843_i2c_remove(struct i2c_client *client) >>> +{ >>> + struct hmc5843 *hmc5843 = i2c_get_clientdata(client); >>> + >>> + sysfs_remove_group(&client->dev.kobj, &hmc5843_attr_group); >>> + input_unregister_polled_device(hmc5843->ipdev); >>> + i2c_set_clientdata(client, NULL); >>> + kfree(hmc5843); >>> + return 0; >>> +} >>> + >>> +#ifdef CONFIG_PM >>> +static int hmc5843_suspend(struct device *dev) >>> +{ >>> + struct i2c_client *client = dev_get_drvdata(dev); >>> + struct hmc5843 *hmc5843 = i2c_get_clientdata(client); >>> + >>> + /* save our current mode for resume and put device to sleep */ >>> + int m = hmc5843->mode; >> Not entirely certain but perhaps need a lock here to prevent user >> changing mode just as suspend occurs? I haven't worked out what exactly >> happens in that case though. >>> + hmc5843->mode = HMC5843_MODE_SLEEP; >>> + hmc5843_write_register(hmc5843, HMC5843_MODE_REG); >>> + hmc5843->mode = m; >>> + return 0; >>> +} >>> + >>> +static int hmc5843_resume(struct device *dev) >>> +{ >>> + struct i2c_client *client = dev_get_drvdata(dev); >>> + struct hmc5843 *hmc5843 = i2c_get_clientdata(client); >>> + >>> + /* restore whatever mode we were in before suspending */ >>> + hmc5843_write_register(hmc5843, HMC5843_MODE_REG); >>> + return 0; >>> +} >>> + >>> +static struct dev_pm_ops hmc5843_dev_pm_ops = { >>> + .suspend = hmc5843_suspend, >>> + .resume = hmc5843_resume, >>> +}; >>> + >>> +#define HMC5843_DEV_PM_OPS (&hmc5843_dev_pm_ops) >>> +#else >>> +#define HMC5843_DEV_PM_OPS NULL >>> +#endif >>> + >>> +static const struct i2c_device_id hmc5843_id[] = { >>> + { "hmc5843", 0 }, >>> + { }, >>> +}; >>> + >>> +MODULE_DEVICE_TABLE(i2c, hmc5843_id); >>> + >>> +static struct i2c_driver hmc5843_i2c_driver = { >>> + .driver = { >>> + .name = "hmc5843", >>> + .owner = THIS_MODULE, >>> + .pm = HMC5843_DEV_PM_OPS, >>> + }, >>> + .probe = hmc5843_i2c_probe, >>> + .remove = __devexit_p(hmc5843_i2c_remove), >>> + .id_table = hmc5843_id, >>> +}; >>> + >>> +static int __init hmc5843_init(void) >>> +{ >>> + return i2c_add_driver(&hmc5843_i2c_driver); >>> +} >>> +module_init(hmc5843_init); >>> + >>> +static void __exit hmc5843_exit(void) >>> +{ >>> + i2c_del_driver(&hmc5843_i2c_driver); >>> +} >>> +module_exit(hmc5843_exit); >>> + >>> +MODULE_AUTHOR("Steven King <sfking@fdwdc.com>"); >>> +MODULE_DESCRIPTION("Honeywell HMC5843 3-Axis Magnetometer driver"); >>> +MODULE_LICENSE("GPL"); >>> -- >>> To unsubscribe from this list: send the line "unsubscribe linux-input" >> in >>> the body of a message to majordomo@vger.kernel.org >>> More majordomo info at http://vger.kernel.org/majordomo-info.html >>> >> >> -- >> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in >> the body of a message to majordomo@vger.kernel.org >> More majordomo info at http://vger.kernel.org/majordomo-info.html >> Please read the FAQ at http://www.tux.org/lkml/ > > -- > To unsubscribe from this list: send the line "unsubscribe linux-kernel" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html > Please read the FAQ at http://www.tux.org/lkml/ ^ permalink raw reply [flat|nested] 6+ messages in thread
* [RFC][PATCH]add Honeywell hmc5843 3-Axis Magnetometer (digital compass) driver. [not found] <0680EC522D0CC943BC586913CF3768C003B3553F73@dbde02.ent.ti.com> 2010-06-25 13:32 ` add Honeywell hmc5843 3-Axis Magnetometer (digital compass) driver Datta, Shubhrajyoti @ 2010-06-30 18:24 ` Datta, Shubhrajyoti 2010-06-30 19:52 ` Jonathan Cameron 1 sibling, 1 reply; 6+ messages in thread From: Datta, Shubhrajyoti @ 2010-06-30 18:24 UTC (permalink / raw) To: linux-iio@vger.kernel.org; +Cc: sfking@fdwdc.com, linux-input@vger.kernel.org Adding support for the Honeywell HMC5843. The interface to the device is i2c. Signed-off-by: Shubhrajyoti D <shubhrajyoti@ti.com> --- drivers/staging/iio/magnetometer/Kconfig | 17 + drivers/staging/iio/magnetometer/Makefile | 5 + drivers/staging/iio/magnetometer/hmc5843.c | 499 ++++++++++++++++++++++++++++ 3 files changed, 521 insertions(+), 0 deletions(-) create mode 100644 drivers/staging/iio/magnetometer/Kconfig create mode 100644 drivers/staging/iio/magnetometer/Makefile create mode 100644 drivers/staging/iio/magnetometer/hmc5843.c diff --git a/drivers/staging/iio/magnetometer/Kconfig b/drivers/staging/iio/magnetometer/Kconfig new file mode 100644 index 0000000..6beda8c --- /dev/null +++ b/drivers/staging/iio/magnetometer/Kconfig @@ -0,0 +1,17 @@ +# +# Magnetometer sensors +# +comment "Magnetometer sensors" + + +config SENSORS_HMC5843 + tristate "Honeywell HMC5843 3-Axis Magnetometer" + depends on I2C && SYSFS +# select INPUT_POLLDEV + help + Say Y here to add support for the Honeywell HMC 5843 3-Axis + Magnetometer (digital compass). + + To compile this driver as a module, choose M here: the module + will be called hmc5843 + diff --git a/drivers/staging/iio/magnetometer/Makefile b/drivers/staging/iio/magnetometer/Makefile new file mode 100644 index 0000000..f9bfb2e --- /dev/null +++ b/drivers/staging/iio/magnetometer/Makefile @@ -0,0 +1,5 @@ +# +# Makefile for industrial I/O Magnetometer sensors +# + +obj-$(CONFIG_SENSORS_HMC5843) += hmc5843.o diff --git a/drivers/staging/iio/magnetometer/hmc5843.c b/drivers/staging/iio/magnetometer/hmc5843.c new file mode 100644 index 0000000..fc3dda9 --- /dev/null +++ b/drivers/staging/iio/magnetometer/hmc5843.c @@ -0,0 +1,499 @@ +/* Copyright (c) 2010 Shubhrajyoti Datta <shubhrajyoti@ti.com> + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/i2c.h> +#include <linux/slab.h> +#include "../iio.h" +#include <linux/types.h> +#include "../sysfs.h" +#include "magnet.h" + +#define HMC5843_I2C_ADDRESS 0x1E + +#define HMC5843_CONFIG_REG_A 0x00 +#define HMC5843_CONFIG_REG_B 0x01 +#define HMC5843_MODE_REG 0x02 +#define HMC5843_DATA_OUT_X_MSB_REG 0x03 +#define HMC5843_DATA_OUT_X_LSB_REG 0x04 +#define HMC5843_DATA_OUT_Y_MSB_REG 0x05 +#define HMC5843_DATA_OUT_Y_LSB_REG 0x06 +#define HMC5843_DATA_OUT_Z_MSB_REG 0x07 +#define HMC5843_DATA_OUT_Z_LSB_REG 0x08 +#define HMC5843_STATUS_REG 0x09 +#define HMC5843_ID_REG_A 0x0A +#define HMC5843_ID_REG_B 0x0B +#define HMC5843_ID_REG_C 0x0C + + +#define HMC5843_ID_REG_LENGTH 0x03 +#define HMC5843_ID_STRING "H43" + +/* + * Range settings in (+-)Ga + * */ +#define RANGE_GAIN_OFFSET 0x05 + +#define RANGE_0_7 0x00 +#define RANGE_1_0 0x01 /* default */ +#define RANGE_1_5 0x02 +#define RANGE_2_0 0x03 +#define RANGE_3_2 0x04 +#define RANGE_3_8 0x05 +#define RANGE_4_5 0x06 +#define RANGE_6_5 0x07 /* Not recommended */ + +/* + * Device status + */ +#define DATA_READY 0x01 +#define DATA_OUTPUT_LOCK 0x02 +#define VOLTAGE_REGULATOR_ENABLED 0x04 + +/* + * Mode register configuration + */ +#define MODE_CONVERSION_CONTINUOUS 0x00 +#define MODE_CONVERSION_SINGLE 0x01 +#define MODE_IDLE 0x02 +#define MODE_SLEEP 0x03 + +/* Minimum Data Output Rate in 1/10 Hz */ +#define RATE_OFFSET 0x02 +#define RATE_5 0x00 +#define RATE_10 0x01 +#define RATE_20 0x02 +#define RATE_50 0x03 +#define RATE_100 0x04 +#define RATE_200 0x05 +#define RATE_500 0x06 +#define RATE_NOT_USED 0x07 + +/* + * Device Configutration + */ +#define CONF_NORMAL 0x00 +#define CONF_POSITIVE_BIAS 0x01 +#define CONF_NEGATIVE_BIAS 0x02 +#define CONF_NOT_USED 0x03 + +static const int regval_to_counts_per_mg[] = { + 1620, /* RANGE_0_7 */ + 1300, + 970, + 780, + 530, + 460, + 390, + 280 /* RANGE_6_5 */ +}; +static const int regval_to_input_field_mg[] = { + 700, + 1000, + 1500, + 2000, + 3200, + 3800, + 4500, + 6500 +}; + +/* Addresses to scan: 0x1E */ +static const unsigned short normal_i2c[] = { HMC5843_I2C_ADDRESS, + I2C_CLIENT_END }; + +/* Each client has this additional data */ +struct hmc5843_data { + struct iio_dev *indio_dev; + u8 rate; + u8 meas_conf; + u8 operating_mode; + u8 range; + s16 data[3]; +}; + +static void hmc5843_init_client(struct i2c_client *client); + +static s32 hmc5843_set_operating_mode(struct i2c_client *client, + u8 operating_mode) +{ + /* The lower two bits contain the current conversion mode */ + return i2c_smbus_write_byte_data(client, + HMC5843_MODE_REG, + (operating_mode & 0x03)); +} + +/* API for setting the measurmet configuration to + * Normal , Positive bias and Negitive bias + */ +static s32 hmc5843_set_meas_conf(struct i2c_client *client, + u8 meas_conf) +{ + struct hmc5843_data *data = i2c_get_clientdata(client); + u8 reg_val; + reg_val = (meas_conf & 0x03) | (data->rate << RATE_OFFSET); + return i2c_smbus_write_byte_data(client, HMC5843_CONFIG_REG_A, reg_val); +} + +static s32 hmc5843_set_rate(struct i2c_client *client, + u8 rate) +{ + struct hmc5843_data *data = i2c_get_clientdata(client); + u8 reg_val; + reg_val = (data->meas_conf) | (rate << RATE_OFFSET); + if (rate >= RATE_NOT_USED) { + dev_err(&client->dev, + "This data output rate is not supported \n"); + return -EINVAL; + } + return i2c_smbus_write_byte_data(client, HMC5843_CONFIG_REG_A, reg_val); +} + +static ssize_t hmc5843_read_measurement(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + /* Return the measurement value from the specified channel */ + struct i2c_client *client = to_i2c_client(dev); + s16 coordinate_val; + struct iio_dev_attr *this_attr = to_iio_dev_attr(attr); + s32 result; + result = i2c_smbus_read_byte_data(client, HMC5843_STATUS_REG); + while (!(result & DATA_READY)) + result = i2c_smbus_read_byte_data(client, HMC5843_STATUS_REG); + + result = i2c_smbus_read_word_data(client, this_attr->address); + if (result > 0) { + coordinate_val = (int)swab16((u16)result); + return sprintf(buf, "%d\n", + coordinate_val); + } + return result; +} +static IIO_DEV_ATTR_MAGN_X(hmc5843_read_measurement, + HMC5843_DATA_OUT_X_MSB_REG); +static IIO_DEV_ATTR_MAGN_Y(hmc5843_read_measurement, + HMC5843_DATA_OUT_Y_MSB_REG); +static IIO_DEV_ATTR_MAGN_Z(hmc5843_read_measurement, + HMC5843_DATA_OUT_Z_MSB_REG); + +static ssize_t show_operating_mode(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct i2c_client *client = to_i2c_client(dev); + struct hmc5843_data *data = i2c_get_clientdata(client); + return sprintf(buf, "%d\n", data->operating_mode); +} +static ssize_t set_operating_mode(struct device *dev, + struct device_attribute *attr, + const char *buf, + size_t count) +{ + struct i2c_client *client = to_i2c_client(dev); + struct hmc5843_data *data = i2c_get_clientdata(client); + struct iio_dev_attr *this_attr = to_iio_dev_attr(attr); + unsigned long operating_mode = 0; + s32 status; + + strict_strtoul(buf, 10, &operating_mode); + dev_dbg(dev, "set Conversion mode to %lu\n", operating_mode); + if (operating_mode > MODE_SLEEP) + return -EINVAL; + + status = i2c_smbus_write_byte_data(client, this_attr->address, + operating_mode); + if (status) + return -EINVAL; + + data->operating_mode = operating_mode; + return count; +} +static IIO_DEVICE_ATTR(operating_mode, + S_IWUSR | S_IRUGO, + show_operating_mode, + set_operating_mode, + HMC5843_MODE_REG); + +static ssize_t show_measurement_configuration(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct i2c_client *client = to_i2c_client(dev); + struct hmc5843_data *data = i2c_get_clientdata(client); + return sprintf(buf, "%d\n", data->meas_conf); +} + +static ssize_t set_measurement_configuration(struct device *dev, + struct device_attribute *attr, + const char *buf, + size_t count) +{ + struct i2c_client *client = to_i2c_client(dev); + struct hmc5843_data *data = i2c_get_clientdata(client); + unsigned long meas_conf = 0; + strict_strtoul(buf, 10, &meas_conf); + dev_dbg(dev, "set mode to %lu\n", meas_conf); + if (hmc5843_set_meas_conf(client, meas_conf) == -EINVAL) + return -EINVAL; + data->meas_conf = meas_conf; + return count; +} +static IIO_DEVICE_ATTR(meas_conf, + S_IWUSR | S_IRUGO, + show_measurement_configuration, + set_measurement_configuration, + 0); + +static ssize_t show_rate(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct i2c_client *client = to_i2c_client(dev); + struct iio_dev_attr *this_attr = to_iio_dev_attr(attr); + u32 rate = (i2c_smbus_read_byte_data(client, this_attr->address) & 0x1C) >> RATE_OFFSET; + return sprintf(buf, "%d\n", rate); +} + +static ssize_t set_rate(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + struct i2c_client *client = to_i2c_client(dev); + struct hmc5843_data *data = i2c_get_clientdata(client); + unsigned long rate = 0; + strict_strtoul(buf, 10, &rate); + + dev_dbg(dev, "set rate to %lu\n", rate); + if (hmc5843_set_rate(client, rate) == -EINVAL) + return -EINVAL; + data->rate = rate; + return count; +} +static IIO_DEVICE_ATTR(rate, S_IWUSR | S_IRUGO, show_rate, + set_rate, HMC5843_CONFIG_REG_A); + +static ssize_t show_range(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + u8 range; + struct i2c_client *client = to_i2c_client(dev); + struct hmc5843_data *data = i2c_get_clientdata(client); + + range = data->range; + return sprintf(buf, " %dmGa\n", regval_to_input_field_mg[range]); +} + +static ssize_t set_range(struct device *dev, + struct device_attribute *attr, + const char *buf, + size_t count) +{ + struct i2c_client *client = to_i2c_client(dev); + struct iio_dev_attr *this_attr = to_iio_dev_attr(attr); + struct hmc5843_data *data = i2c_get_clientdata(client); + unsigned long range = 0; + + strict_strtoul(buf, 10, &range); + dev_dbg(dev, "set range to %lu\n", range); + + if (range > RANGE_6_5) + return -EINVAL; + + data->range = range; + range = range << RANGE_GAIN_OFFSET; + if (i2c_smbus_write_byte_data(client, this_attr->address, range) == + -EINVAL) + return -EINVAL; + + return count; +} + +static IIO_DEVICE_ATTR(magn_xyz_range, + S_IWUSR | S_IRUGO, + show_range, + set_range, + HMC5843_CONFIG_REG_B); + +static ssize_t show_gain(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct i2c_client *client = to_i2c_client(dev); + struct hmc5843_data *data = i2c_get_clientdata(client); + return sprintf(buf, "%d\n", regval_to_counts_per_mg[data->range]); +} +static IIO_DEVICE_ATTR(magn_xyz_gain, S_IRUGO, show_gain, NULL , 0); + + +static struct attribute *hmc5843_attributes[] = { + &iio_dev_attr_meas_conf.dev_attr.attr, + &iio_dev_attr_operating_mode.dev_attr.attr, + &iio_dev_attr_rate.dev_attr.attr, + &iio_dev_attr_magn_xyz_range.dev_attr.attr, + &iio_dev_attr_magn_xyz_gain.dev_attr.attr, + &iio_dev_attr_magn_x_raw.dev_attr.attr, + &iio_dev_attr_magn_y_raw.dev_attr.attr, + &iio_dev_attr_magn_z_raw.dev_attr.attr, + NULL +}; + +static const struct attribute_group hmc5843_group = { + .attrs = hmc5843_attributes, +}; + +static int hmc5843_detect(struct i2c_client *client, + struct i2c_board_info *info) +{ + unsigned char id_str[HMC5843_ID_REG_LENGTH]; + + if (client->addr != HMC5843_I2C_ADDRESS) + return -ENODEV; + + if (i2c_smbus_read_i2c_block_data(client, HMC5843_ID_REG_A, + HMC5843_ID_REG_LENGTH, id_str) + != HMC5843_ID_REG_LENGTH) + return -ENODEV; + + if (0 != strncmp(id_str, HMC5843_ID_STRING, HMC5843_ID_REG_LENGTH)) + return -ENODEV; + + return 0; +} + + +static int hmc5843_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct hmc5843_data *data; + int err = 0; + + data = kzalloc(sizeof(struct hmc5843_data), GFP_KERNEL); + if (!data) { + err = -ENOMEM; + goto exit; + } + + /* default settings at probe */ + + data->meas_conf = CONF_NORMAL; + data->range = RANGE_1_0; + data->operating_mode = MODE_CONVERSION_CONTINUOUS; + + i2c_set_clientdata(client, data); + + /* Initialize the HMC5843 chip */ + hmc5843_init_client(client); + + data->indio_dev = iio_allocate_device(); + if (!data->indio_dev) + goto exit_free; + data->indio_dev->attrs = &hmc5843_group; + data->indio_dev->dev.parent = &client->dev; + data->indio_dev->dev_data = (void *)(data); + data->indio_dev->driver_module = THIS_MODULE; + data->indio_dev->modes = INDIO_DIRECT_MODE; + err = iio_device_register(data->indio_dev); + if (err) + goto exit_free; + /* Register sysfs hooks */ + err = sysfs_create_group(&client->dev.kobj, &hmc5843_group); + if (err) + goto exit_free2; + + return 0; +exit_free2: + iio_device_unregister(data->indio_dev); +exit_free: + kfree(data); +exit: + return err; +} + +static int hmc5843_remove(struct i2c_client *client) +{ + struct hmc5843_data *data = i2c_get_clientdata(client); + /* sleep mode to save power */ + hmc5843_set_operating_mode(client, MODE_SLEEP); + iio_device_unregister(data->indio_dev); + sysfs_remove_group(&client->dev.kobj, &hmc5843_group); + kfree(i2c_get_clientdata(client)); + return 0; +} + +/* Called when we have found a new HMC5843. */ +static void hmc5843_init_client(struct i2c_client *client) +{ + struct hmc5843_data *data = i2c_get_clientdata(client); + hmc5843_set_meas_conf(client, data->meas_conf); + hmc5843_set_rate(client, data->rate); + hmc5843_set_operating_mode(client, data->operating_mode); + i2c_smbus_write_byte_data(client, HMC5843_CONFIG_REG_B, data->range); + pr_info("HMC5843 initialized\n"); +} + +static int hmc5843_suspend(struct i2c_client *client, pm_message_t mesg) +{ + hmc5843_set_operating_mode(client, MODE_SLEEP); + pr_info("HMC5843 suspended\n"); + return 0; +} + +static int hmc5843_resume(struct i2c_client *client) +{ + struct hmc5843_data *data = i2c_get_clientdata(client); + hmc5843_set_operating_mode(client, data->operating_mode); + pr_info("HMC5843 resumed\n"); + return 0; +} + +static const struct i2c_device_id hmc5843_id[] = { + { "hmc5843", 0 }, + { } +}; + +static struct i2c_driver hmc5843_driver = { + .driver = { + .name = "hmc5843", + }, + .id_table = hmc5843_id, + .probe = hmc5843_probe, + .remove = hmc5843_remove, + .detect = hmc5843_detect, + .address_list = normal_i2c, + .suspend = hmc5843_suspend, + .resume = hmc5843_resume, +}; + +static int __init hmc5843_init(void) +{ + printk(KERN_INFO "init!\n"); + return i2c_add_driver(&hmc5843_driver); +} + +static void __exit hmc5843_exit(void) +{ + printk(KERN_INFO "exit!\n"); + i2c_del_driver(&hmc5843_driver); +} + +MODULE_AUTHOR("Shubhrajyoti Datta <shubhrajyoti@ti.com"); +MODULE_DESCRIPTION("HMC5843 driver"); +MODULE_LICENSE("GPL"); + +module_init(hmc5843_init); +module_exit(hmc5843_exit); -- 1.5.4.7 ^ permalink raw reply related [flat|nested] 6+ messages in thread
* Re: [RFC][PATCH]add Honeywell hmc5843 3-Axis Magnetometer (digital compass) driver. 2010-06-30 18:24 ` [RFC][PATCH]add " Datta, Shubhrajyoti @ 2010-06-30 19:52 ` Jonathan Cameron 2010-07-01 6:40 ` Datta, Shubhrajyoti 0 siblings, 1 reply; 6+ messages in thread From: Jonathan Cameron @ 2010-06-30 19:52 UTC (permalink / raw) To: Datta, Shubhrajyoti Cc: linux-iio@vger.kernel.org, sfking@fdwdc.com, linux-input@vger.kernel.org Hi, Welcome to iio! This is only an initial pass.. I haven't read the datasheet yet! I think your email client has eaten the tabs, so please fix this before resending. There are also a few suspiciously long lines implying the need to run checkpatch over this and fix everything it throws up. A fair number of questions / comments below, but they are all fairly trivial. > Adding support for the Honeywell HMC5843. The interface to the device is i2c. > > Signed-off-by: Shubhrajyoti D <shubhrajyoti@ti.com> > --- > drivers/staging/iio/magnetometer/Kconfig | 17 + > drivers/staging/iio/magnetometer/Makefile | 5 + > drivers/staging/iio/magnetometer/hmc5843.c | 499 ++++++++++++++++++++++++++++ > 3 files changed, 521 insertions(+), 0 deletions(-) > create mode 100644 drivers/staging/iio/magnetometer/Kconfig > create mode 100644 drivers/staging/iio/magnetometer/Makefile > create mode 100644 drivers/staging/iio/magnetometer/hmc5843.c > > diff --git a/drivers/staging/iio/magnetometer/Kconfig b/drivers/staging/iio/magnetometer/Kconfig > new file mode 100644 > index 0000000..6beda8c > --- /dev/null > +++ b/drivers/staging/iio/magnetometer/Kconfig > @@ -0,0 +1,17 @@ > +# > +# Magnetometer sensors > +# > +comment "Magnetometer sensors" Single blank line probably... > + > + > +config SENSORS_HMC5843 > + tristate "Honeywell HMC5843 3-Axis Magnetometer" > + depends on I2C && SYSFS loose the sysfs as it should be handled before this menu option is seen > +# select INPUT_POLLDEV left over commented to be removed. > + help > + Say Y here to add support for the Honeywell HMC 5843 3-Axis > + Magnetometer (digital compass). > + > + To compile this driver as a module, choose M here: the module > + will be called hmc5843 > + > diff --git a/drivers/staging/iio/magnetometer/Makefile b/drivers/staging/iio/magnetometer/Makefile > new file mode 100644 > index 0000000..f9bfb2e > --- /dev/null > +++ b/drivers/staging/iio/magnetometer/Makefile > @@ -0,0 +1,5 @@ > +# > +# Makefile for industrial I/O Magnetometer sensors > +# > + > +obj-$(CONFIG_SENSORS_HMC5843) += hmc5843.o > diff --git a/drivers/staging/iio/magnetometer/hmc5843.c b/drivers/staging/iio/magnetometer/hmc5843.c > new file mode 100644 > index 0000000..fc3dda9 > --- /dev/null > +++ b/drivers/staging/iio/magnetometer/hmc5843.c > @@ -0,0 +1,499 @@ > +/* Copyright (c) 2010 Shubhrajyoti Datta <shubhrajyoti@ti.com> > + > + This program is free software; you can redistribute it and/or modify > + it under the terms of the GNU General Public License as published by > + the Free Software Foundation; either version 2 of the License, or > + (at your option) any later version. > + > + This program is distributed in the hope that it will be useful, > + but WITHOUT ANY WARRANTY; without even the implied warranty of > + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > + GNU General Public License for more details. > + > + You should have received a copy of the GNU General Public License > + along with this program; if not, write to the Free Software > + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. > +*/ > + > +#include <linux/module.h> > +#include <linux/init.h> > +#include <linux/i2c.h> > +#include <linux/slab.h> To make life easy when we merge iio it would be great to group all the iio headers together. Good practice anyway to group headers where it makes sense. > +#include "../iio.h" > +#include <linux/types.h> > +#include "../sysfs.h" > +#include "magnet.h" > + > +#define HMC5843_I2C_ADDRESS 0x1E > + > +#define HMC5843_CONFIG_REG_A 0x00 > +#define HMC5843_CONFIG_REG_B 0x01 > +#define HMC5843_MODE_REG 0x02 > +#define HMC5843_DATA_OUT_X_MSB_REG 0x03 > +#define HMC5843_DATA_OUT_X_LSB_REG 0x04 > +#define HMC5843_DATA_OUT_Y_MSB_REG 0x05 > +#define HMC5843_DATA_OUT_Y_LSB_REG 0x06 > +#define HMC5843_DATA_OUT_Z_MSB_REG 0x07 > +#define HMC5843_DATA_OUT_Z_LSB_REG 0x08 > +#define HMC5843_STATUS_REG 0x09 > +#define HMC5843_ID_REG_A 0x0A > +#define HMC5843_ID_REG_B 0x0B > +#define HMC5843_ID_REG_C 0x0C > + > + > +#define HMC5843_ID_REG_LENGTH 0x03 > +#define HMC5843_ID_STRING "H43" > + > +/* > + * Range settings in (+-)Ga > + * */ > +#define RANGE_GAIN_OFFSET 0x05 > + > +#define RANGE_0_7 0x00 > +#define RANGE_1_0 0x01 /* default */ > +#define RANGE_1_5 0x02 > +#define RANGE_2_0 0x03 > +#define RANGE_3_2 0x04 > +#define RANGE_3_8 0x05 > +#define RANGE_4_5 0x06 > +#define RANGE_6_5 0x07 /* Not recommended */ > + > +/* > + * Device status > + */ > +#define DATA_READY 0x01 > +#define DATA_OUTPUT_LOCK 0x02 > +#define VOLTAGE_REGULATOR_ENABLED 0x04 > + > +/* > + * Mode register configuration > + */ > +#define MODE_CONVERSION_CONTINUOUS 0x00 > +#define MODE_CONVERSION_SINGLE 0x01 > +#define MODE_IDLE 0x02 > +#define MODE_SLEEP 0x03 > + > +/* Minimum Data Output Rate in 1/10 Hz */ > +#define RATE_OFFSET 0x02 > +#define RATE_5 0x00 > +#define RATE_10 0x01 > +#define RATE_20 0x02 > +#define RATE_50 0x03 > +#define RATE_100 0x04 > +#define RATE_200 0x05 > +#define RATE_500 0x06 > +#define RATE_NOT_USED 0x07 > + > +/* > + * Device Configutration > + */ > +#define CONF_NORMAL 0x00 > +#define CONF_POSITIVE_BIAS 0x01 > +#define CONF_NEGATIVE_BIAS 0x02 > +#define CONF_NOT_USED 0x03 > + > +static const int regval_to_counts_per_mg[] = { > + 1620, /* RANGE_0_7 */ > + 1300, > + 970, > + 780, > + 530, > + 460, > + 390, > + 280 /* RANGE_6_5 */ > +}; > +static const int regval_to_input_field_mg[] = { > + 700, > + 1000, > + 1500, > + 2000, > + 3200, > + 3800, > + 4500, > + 6500 > +}; > + > +/* Addresses to scan: 0x1E */ > +static const unsigned short normal_i2c[] = { HMC5843_I2C_ADDRESS, > + I2C_CLIENT_END }; > + > +/* Each client has this additional data */ > +struct hmc5843_data { > + struct iio_dev *indio_dev; > + u8 rate; > + u8 meas_conf; > + u8 operating_mode; > + u8 range; > + s16 data[3]; > +}; > + I think a bit of simple function reordering should remove necessity for this function def. > +static void hmc5843_init_client(struct i2c_client *client); > + > +static s32 hmc5843_set_operating_mode(struct i2c_client *client, > + u8 operating_mode) > +{ > + /* The lower two bits contain the current conversion mode */ > + return i2c_smbus_write_byte_data(client, > + HMC5843_MODE_REG, > + (operating_mode & 0x03)); > +} > + > +/* API for setting the measurmet configuration to bonus space before comma > + * Normal , Positive bias and Negitive bias > + */ Can you give more details on this please? Does this have a predictable effect on what one needs to do to work out actual numbers in userspace from the raw values the driver is producing? > +static s32 hmc5843_set_meas_conf(struct i2c_client *client, > + u8 meas_conf) > +{ > + struct hmc5843_data *data = i2c_get_clientdata(client); > + u8 reg_val; > + reg_val = (meas_conf & 0x03) | (data->rate << RATE_OFFSET); > + return i2c_smbus_write_byte_data(client, HMC5843_CONFIG_REG_A, reg_val); > +} > + Please avoid magic numbers. What you want is a pair of attributes: * sampling_frequency_available which is a constant string listing of those frequencies that are available (in hz). * sampling_frequency which then matches against the actual value list and figures out what the internal representation is. I'm afraid rigorous inforcement of trying to avoid magic numbers is vital if we are ever going to have general userspace code. > +static s32 hmc5843_set_rate(struct i2c_client *client, > + u8 rate) > +{ > + struct hmc5843_data *data = i2c_get_clientdata(client); > + u8 reg_val; nitpick: line break here please > + reg_val = (data->meas_conf) | (rate << RATE_OFFSET); > + if (rate >= RATE_NOT_USED) { > + dev_err(&client->dev, > + "This data output rate is not supported \n"); > + return -EINVAL; > + } > + return i2c_smbus_write_byte_data(client, HMC5843_CONFIG_REG_A, reg_val); > +} > + > +static ssize_t hmc5843_read_measurement(struct device *dev, > + struct device_attribute *attr, > + char *buf) > +{ nitpick: move comment up to above the function. > + /* Return the measurement value from the specified channel */ > + struct i2c_client *client = to_i2c_client(dev); > + s16 coordinate_val; > + struct iio_dev_attr *this_attr = to_iio_dev_attr(attr); > + s32 result; nitpick: New line after defs and before code. > + result = i2c_smbus_read_byte_data(client, HMC5843_STATUS_REG); > + while (!(result & DATA_READY)) > + result = i2c_smbus_read_byte_data(client, HMC5843_STATUS_REG); > + > + result = i2c_smbus_read_word_data(client, this_attr->address); > + if (result > 0) { as coordinate_val is an s16 which not type cast to that? > + coordinate_val = (int)swab16((u16)result); curious line break below... > + return sprintf(buf, "%d\n", > + coordinate_val); So, this is a raw value? (e.g. it will need scaling in userspace) > + } > + return result; > +} > +static IIO_DEV_ATTR_MAGN_X(hmc5843_read_measurement, > + HMC5843_DATA_OUT_X_MSB_REG); > +static IIO_DEV_ATTR_MAGN_Y(hmc5843_read_measurement, > + HMC5843_DATA_OUT_Y_MSB_REG); > +static IIO_DEV_ATTR_MAGN_Z(hmc5843_read_measurement, > + HMC5843_DATA_OUT_Z_MSB_REG); > + This definitely need some documentation please! Also, as per other functions, please prefix name with hmc5843 to make name clashes extremely unlikely. Applies to quite a few of the functions that follow. > +static ssize_t show_operating_mode(struct device *dev, > + struct device_attribute *attr, > + char *buf) > +{ > + struct i2c_client *client = to_i2c_client(dev); > + struct hmc5843_data *data = i2c_get_clientdata(client); > + return sprintf(buf, "%d\n", data->operating_mode); > +} nitpick: new line between functions please. > +static ssize_t set_operating_mode(struct device *dev, > + struct device_attribute *attr, > + const char *buf, > + size_t count) > +{ > + struct i2c_client *client = to_i2c_client(dev); > + struct hmc5843_data *data = i2c_get_clientdata(client); > + struct iio_dev_attr *this_attr = to_iio_dev_attr(attr); > + unsigned long operating_mode = 0; > + s32 status; > + > + strict_strtoul(buf, 10, &operating_mode); > + dev_dbg(dev, "set Conversion mode to %lu\n", operating_mode); > + if (operating_mode > MODE_SLEEP) > + return -EINVAL; > + > + status = i2c_smbus_write_byte_data(client, this_attr->address, > + operating_mode); > + if (status) > + return -EINVAL; > + > + data->operating_mode = operating_mode; > + return count; > +} > +static IIO_DEVICE_ATTR(operating_mode, > + S_IWUSR | S_IRUGO, > + show_operating_mode, > + set_operating_mode, > + HMC5843_MODE_REG); > + > +static ssize_t show_measurement_configuration(struct device *dev, > + struct device_attribute *attr, > + char *buf) > +{ > + struct i2c_client *client = to_i2c_client(dev); > + struct hmc5843_data *data = i2c_get_clientdata(client); > + return sprintf(buf, "%d\n", data->meas_conf); > +} > + > +static ssize_t set_measurement_configuration(struct device *dev, > + struct device_attribute *attr, > + const char *buf, > + size_t count) > +{ > + struct i2c_client *client = to_i2c_client(dev); > + struct hmc5843_data *data = i2c_get_clientdata(client); > + unsigned long meas_conf = 0; > + strict_strtoul(buf, 10, &meas_conf); > + dev_dbg(dev, "set mode to %lu\n", meas_conf); What about other errors from i2c_smbus call? > + if (hmc5843_set_meas_conf(client, meas_conf) == -EINVAL) > + return -EINVAL; > + data->meas_conf = meas_conf; I wonder if you need some locking to ensure the cached values are equal to those on the device (nothing prevents 2 calls to the function at the same time). > + return count; > +} Please provide some documentation for this. > +static IIO_DEVICE_ATTR(meas_conf, > + S_IWUSR | S_IRUGO, > + show_measurement_configuration, > + set_measurement_configuration, > + 0); > + Moving this one to next to set_rate will give more readable code. > +static ssize_t show_rate(struct device *dev, > + struct device_attribute *attr, char *buf) > +{ > + struct i2c_client *client = to_i2c_client(dev); > + struct iio_dev_attr *this_attr = to_iio_dev_attr(attr); Please consider error from i2c_smbus call. > + u32 rate = (i2c_smbus_read_byte_data(client, this_attr->address) & 0x1C) >> RATE_OFFSET; > + return sprintf(buf, "%d\n", rate); > +} > + > +static ssize_t set_rate(struct device *dev, struct device_attribute *attr, > + const char *buf, size_t count) > +{ > + struct i2c_client *client = to_i2c_client(dev); > + struct hmc5843_data *data = i2c_get_clientdata(client); > + unsigned long rate = 0; > + strict_strtoul(buf, 10, &rate); please handle return value. > + > + dev_dbg(dev, "set rate to %lu\n", rate); > + if (hmc5843_set_rate(client, rate) == -EINVAL) > + return -EINVAL; > + data->rate = rate; > + return count; > +} sampling_frequency please. No idea why we went with that, but there are quite a few drivers using it now. > +static IIO_DEVICE_ATTR(rate, S_IWUSR | S_IRUGO, show_rate, > + set_rate, HMC5843_CONFIG_REG_A); > + > +static ssize_t show_range(struct device *dev, > + struct device_attribute *attr, > + char *buf) > +{ > + u8 range; > + struct i2c_client *client = to_i2c_client(dev); > + struct hmc5843_data *data = i2c_get_clientdata(client); > + > + range = data->range; I know this occurs elsewhere in the subsystem (it's on my todo list to cull them!), as per hwmon whose abi we lifted please don't output units, it just makes userspace code more fiddly. > + return sprintf(buf, " %dmGa\n", regval_to_input_field_mg[range]); > +} > + Can you describe this interface please? Looks suspiciously like some magic numbers to me which is curious as you seem to have nice real numbers for the show range value above. You may want a magn_xyz_range_available listing the options, or to round up to an available value. Actually if it applies to all channels, then supress the xyz. The abi only allows all or one for each channel (which may effect each other). > +static ssize_t set_range(struct device *dev, > + struct device_attribute *attr, > + const char *buf, > + size_t count) > +{ > + struct i2c_client *client = to_i2c_client(dev); > + struct iio_dev_attr *this_attr = to_iio_dev_attr(attr); > + struct hmc5843_data *data = i2c_get_clientdata(client); > + unsigned long range = 0; > + > + strict_strtoul(buf, 10, &range); > + dev_dbg(dev, "set range to %lu\n", range); > + > + if (range > RANGE_6_5) > + return -EINVAL; > + > + data->range = range; > + range = range << RANGE_GAIN_OFFSET; > + if (i2c_smbus_write_byte_data(client, this_attr->address, range) == > + -EINVAL) > + return -EINVAL; > + > + return count; > +} > + To match similar bits of the abi, can we call this one magn_range as it applies to all magn channels. > +static IIO_DEVICE_ATTR(magn_xyz_range, > + S_IWUSR | S_IRUGO, > + show_range, > + set_range, > + HMC5843_CONFIG_REG_B); > + > +static ssize_t show_gain(struct device *dev, > + struct device_attribute *attr, > + char *buf) > +{ > + struct i2c_client *client = to_i2c_client(dev); > + struct hmc5843_data *data = i2c_get_clientdata(client); > + return sprintf(buf, "%d\n", regval_to_counts_per_mg[data->range]); > +} Same here. If it applies to all, supress the channel names. So magn_gain > +static IIO_DEVICE_ATTR(magn_xyz_gain, S_IRUGO, show_gain, NULL , 0); > + > + > +static struct attribute *hmc5843_attributes[] = { > + &iio_dev_attr_meas_conf.dev_attr.attr, > + &iio_dev_attr_operating_mode.dev_attr.attr, > + &iio_dev_attr_rate.dev_attr.attr, > + &iio_dev_attr_magn_xyz_range.dev_attr.attr, > + &iio_dev_attr_magn_xyz_gain.dev_attr.attr, > + &iio_dev_attr_magn_x_raw.dev_attr.attr, > + &iio_dev_attr_magn_y_raw.dev_attr.attr, > + &iio_dev_attr_magn_z_raw.dev_attr.attr, > + NULL > +}; > + > +static const struct attribute_group hmc5843_group = { > + .attrs = hmc5843_attributes, > +}; > + > +static int hmc5843_detect(struct i2c_client *client, > + struct i2c_board_info *info) > +{ > + unsigned char id_str[HMC5843_ID_REG_LENGTH]; > + > + if (client->addr != HMC5843_I2C_ADDRESS) > + return -ENODEV; > + > + if (i2c_smbus_read_i2c_block_data(client, HMC5843_ID_REG_A, > + HMC5843_ID_REG_LENGTH, id_str) > + != HMC5843_ID_REG_LENGTH) > + return -ENODEV; > + > + if (0 != strncmp(id_str, HMC5843_ID_STRING, HMC5843_ID_REG_LENGTH)) > + return -ENODEV; > + > + return 0; > +} > + one new line please > + > +static int hmc5843_probe(struct i2c_client *client, > + const struct i2c_device_id *id) > +{ > + struct hmc5843_data *data; > + int err = 0; > + > + data = kzalloc(sizeof(struct hmc5843_data), GFP_KERNEL); > + if (!data) { > + err = -ENOMEM; > + goto exit; > + } > + > + /* default settings at probe */ > + > + data->meas_conf = CONF_NORMAL; > + data->range = RANGE_1_0; > + data->operating_mode = MODE_CONVERSION_CONTINUOUS; > + > + i2c_set_clientdata(client, data); > + > + /* Initialize the HMC5843 chip */ > + hmc5843_init_client(client); > + > + data->indio_dev = iio_allocate_device(); > + if (!data->indio_dev) if this fails, please return -ENOMEM; Currently you return sucess! > + goto exit_free; > + data->indio_dev->attrs = &hmc5843_group; > + data->indio_dev->dev.parent = &client->dev; > + data->indio_dev->dev_data = (void *)(data); > + data->indio_dev->driver_module = THIS_MODULE; > + data->indio_dev->modes = INDIO_DIRECT_MODE; > + err = iio_device_register(data->indio_dev); > + if (err) > + goto exit_free; > + /* Register sysfs hooks */ please use the iio register stuff for this as per other drivers. (basically set data->indio_dev->attrs = &hmc5843_group before iio_device_register call and it will all be handled for you. > + err = sysfs_create_group(&client->dev.kobj, &hmc5843_group); > + if (err) > + goto exit_free2; > + > + return 0; > +exit_free2: > + iio_device_unregister(data->indio_dev); > +exit_free: > + kfree(data); > +exit: > + return err; > +} > + > +static int hmc5843_remove(struct i2c_client *client) > +{ > + struct hmc5843_data *data = i2c_get_clientdata(client); > + /* sleep mode to save power */ > + hmc5843_set_operating_mode(client, MODE_SLEEP); > + iio_device_unregister(data->indio_dev); make the change above and you won't need to do this > + sysfs_remove_group(&client->dev.kobj, &hmc5843_group); > + kfree(i2c_get_clientdata(client)); > + return 0; > +} > + > +/* Called when we have found a new HMC5843. */ > +static void hmc5843_init_client(struct i2c_client *client) > +{ > + struct hmc5843_data *data = i2c_get_clientdata(client); > + hmc5843_set_meas_conf(client, data->meas_conf); > + hmc5843_set_rate(client, data->rate); > + hmc5843_set_operating_mode(client, data->operating_mode); > + i2c_smbus_write_byte_data(client, HMC5843_CONFIG_REG_B, data->range); > + pr_info("HMC5843 initialized\n"); > +} > + > +static int hmc5843_suspend(struct i2c_client *client, pm_message_t mesg) > +{ > + hmc5843_set_operating_mode(client, MODE_SLEEP); > + pr_info("HMC5843 suspended\n"); > + return 0; > +} > + > +static int hmc5843_resume(struct i2c_client *client) > +{ > + struct hmc5843_data *data = i2c_get_clientdata(client); > + hmc5843_set_operating_mode(client, data->operating_mode); probably uncessary noise in debug for an in mainline driver (obviously very handy during development!) > + pr_info("HMC5843 resumed\n"); > + return 0; > +} > + > +static const struct i2c_device_id hmc5843_id[] = { > + { "hmc5843", 0 }, > + { } > +}; > + > +static struct i2c_driver hmc5843_driver = { > + .driver = { > + .name = "hmc5843", > + }, > + .id_table = hmc5843_id, > + .probe = hmc5843_probe, > + .remove = hmc5843_remove, > + .detect = hmc5843_detect, > + .address_list = normal_i2c, > + .suspend = hmc5843_suspend, > + .resume = hmc5843_resume, > +}; > + > +static int __init hmc5843_init(void) > +{ loose this debug printk > + printk(KERN_INFO "init!\n"); > + return i2c_add_driver(&hmc5843_driver); > +} > + > +static void __exit hmc5843_exit(void) > +{ loose this debug printk > + printk(KERN_INFO "exit!\n"); > + i2c_del_driver(&hmc5843_driver); > +} > + > +MODULE_AUTHOR("Shubhrajyoti Datta <shubhrajyoti@ti.com"); > +MODULE_DESCRIPTION("HMC5843 driver"); > +MODULE_LICENSE("GPL"); > + > +module_init(hmc5843_init); > +module_exit(hmc5843_exit); > -- > 1.5.4.7 > > > > -- > To unsubscribe from this list: send the line "unsubscribe linux-iio" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html > ^ permalink raw reply [flat|nested] 6+ messages in thread
* RE: [RFC][PATCH]add Honeywell hmc5843 3-Axis Magnetometer (digital compass) driver. 2010-06-30 19:52 ` Jonathan Cameron @ 2010-07-01 6:40 ` Datta, Shubhrajyoti 2010-07-01 9:47 ` Jonathan Cameron 0 siblings, 1 reply; 6+ messages in thread From: Datta, Shubhrajyoti @ 2010-07-01 6:40 UTC (permalink / raw) To: Jonathan Cameron; +Cc: linux-iio@vger.kernel.org, sfking@fdwdc.com nitpick: move comment up to above the function. > + /* Return the measurement value from the specified channel */ > + struct i2c_client *client =3D to_i2c_client(dev); > + s16 coordinate_val; > + struct iio_dev_attr *this_attr =3D to_iio_dev_attr(attr); > + s32 result; nitpick: New line after defs and before code. > + result =3D i2c_smbus_read_byte_data(client, HMC5843_STATUS_REG); > + while (!(result & DATA_READY)) > + result =3D i2c_smbus_read_byte_data(client, HMC5843_STATU= S_REG); > + > + result =3D i2c_smbus_read_word_data(client, this_attr->address); > + if (result > 0) { as coordinate_val is an s16 which not type cast to that? > + coordinate_val =3D (int)swab16((u16)result); curious line break below... > + return sprintf(buf, "%d\n", > + coordinate_val); So, this is a raw value? (e.g. it will need scaling in userspace) Would you prefer to convert in SI units and then report? > + } > + return result; > +} ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [RFC][PATCH]add Honeywell hmc5843 3-Axis Magnetometer (digital compass) driver. 2010-07-01 6:40 ` Datta, Shubhrajyoti @ 2010-07-01 9:47 ` Jonathan Cameron 0 siblings, 0 replies; 6+ messages in thread From: Jonathan Cameron @ 2010-07-01 9:47 UTC (permalink / raw) To: Datta, Shubhrajyoti; +Cc: linux-iio@vger.kernel.org, sfking@fdwdc.com On 07/01/10 07:40, Datta, Shubhrajyoti wrote: > > nitpick: move comment up to above the function. >> + /* Return the measurement value from the specified channel */ >> + struct i2c_client *client = to_i2c_client(dev); >> + s16 coordinate_val; >> + struct iio_dev_attr *this_attr = to_iio_dev_attr(attr); >> + s32 result; > nitpick: New line after defs and before code. >> + result = i2c_smbus_read_byte_data(client, HMC5843_STATUS_REG); >> + while (!(result & DATA_READY)) >> + result = i2c_smbus_read_byte_data(client, HMC5843_STATUS_REG); >> + >> + result = i2c_smbus_read_word_data(client, this_attr->address); >> + if (result > 0) { > as coordinate_val is an s16 which not type cast to that? >> + coordinate_val = (int)swab16((u16)result); > curious line break below... >> + return sprintf(buf, "%d\n", >> + coordinate_val); > So, this is a raw value? (e.g. it will need scaling in userspace) > > > Would you prefer to convert in SI units and then report? That depends on whether it is a linear conversion. If it is linear the you can provide additional attributes to allow userspace to rescale it. Either option is fine here. Call it _input if in SI units or _raw if it is a value that needs conversion. Jonathan > >> + } >> + return result; >> +} > > ^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2010-07-01 9:45 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
[not found] <0680EC522D0CC943BC586913CF3768C003B3553F73@dbde02.ent.ti.com>
2010-06-25 13:32 ` add Honeywell hmc5843 3-Axis Magnetometer (digital compass) driver Datta, Shubhrajyoti
2010-06-25 15:07 ` Jonathan Cameron
2010-06-30 18:24 ` [RFC][PATCH]add " Datta, Shubhrajyoti
2010-06-30 19:52 ` Jonathan Cameron
2010-07-01 6:40 ` Datta, Shubhrajyoti
2010-07-01 9:47 ` Jonathan Cameron
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.