* [PATCH v2] Add support HSMMC on Samsung SMDKV210 @ 2010-07-03 0:07 ` Kukjin Kim 0 siblings, 0 replies; 12+ messages in thread From: Kukjin Kim @ 2010-07-03 0:07 UTC (permalink / raw) To: linux-arm-kernel, linux-samsung-soc; +Cc: ben-linux This patch adds support hsmmc on SMDKV210. Changes since v1: - Fixed wrong pin name in comments - Adding missed call s5pv210_default_sdhci3() in s5pv210_map_io() - Minor coding style fixes [PATCH v2 1/2] ARM: SAMSUNG: Add device definition for HSMMC3 [PATCH v2 2/2] ARM: S5PV210: Add support HSMMC on SMDKV210 ^ permalink raw reply [flat|nested] 12+ messages in thread
* [PATCH v2] Add support HSMMC on Samsung SMDKV210 @ 2010-07-03 0:07 ` Kukjin Kim 0 siblings, 0 replies; 12+ messages in thread From: Kukjin Kim @ 2010-07-03 0:07 UTC (permalink / raw) To: linux-arm-kernel This patch adds support hsmmc on SMDKV210. Changes since v1: - Fixed wrong pin name in comments - Adding missed call s5pv210_default_sdhci3() in s5pv210_map_io() - Minor coding style fixes [PATCH v2 1/2] ARM: SAMSUNG: Add device definition for HSMMC3 [PATCH v2 2/2] ARM: S5PV210: Add support HSMMC on SMDKV210 ^ permalink raw reply [flat|nested] 12+ messages in thread
* [PATCH v2 1/2] ARM: SAMSUNG: Add device definition for HSMMC3 2010-07-03 0:07 ` Kukjin Kim @ 2010-07-03 0:07 ` Kukjin Kim -1 siblings, 0 replies; 12+ messages in thread From: Kukjin Kim @ 2010-07-03 0:07 UTC (permalink / raw) To: linux-arm-kernel, linux-samsung-soc; +Cc: ben-linux, Hyuk Lee, Kukjin Kim From: Hyuk Lee <hyuk1.lee@samsung.com> This patch adds hsmmc3 device definition in plat-samsung. Because now S5PV210 can support 4 hsmmc such as hsmmc0, hsmmc1, hsmmc2 and hsmmc3 and that can be used in further Samsung SoCs. Signed-off-by: Hyuk Lee <hyuk1.lee@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> --- Changes since previous patch: - coding style fixes arch/arm/plat-samsung/Kconfig | 5 ++ arch/arm/plat-samsung/Makefile | 1 + arch/arm/plat-samsung/dev-hsmmc3.c | 72 ++++++++++++++++++++++++++++ arch/arm/plat-samsung/include/plat/devs.h | 1 + arch/arm/plat-samsung/include/plat/sdhci.h | 15 ++++++ 5 files changed, 94 insertions(+), 0 deletions(-) create mode 100644 arch/arm/plat-samsung/dev-hsmmc3.c diff --git a/arch/arm/plat-samsung/Kconfig b/arch/arm/plat-samsung/Kconfig index 2753fb3..8efb012 100644 --- a/arch/arm/plat-samsung/Kconfig +++ b/arch/arm/plat-samsung/Kconfig @@ -160,6 +160,11 @@ config S3C_DEV_HSMMC2 help Compile in platform device definitions for HSMMC channel 2 +config S3C_DEV_HSMMC3 + bool + help + Compile in platform device definitions for HSMMC channel 3 + config S3C_DEV_HWMON bool help diff --git a/arch/arm/plat-samsung/Makefile b/arch/arm/plat-samsung/Makefile index b1d82cc..c9abae5 100644 --- a/arch/arm/plat-samsung/Makefile +++ b/arch/arm/plat-samsung/Makefile @@ -33,6 +33,7 @@ obj-$(CONFIG_S3C_ADC) += adc.o obj-$(CONFIG_S3C_DEV_HSMMC) += dev-hsmmc.o obj-$(CONFIG_S3C_DEV_HSMMC1) += dev-hsmmc1.o obj-$(CONFIG_S3C_DEV_HSMMC2) += dev-hsmmc2.o +obj-$(CONFIG_S3C_DEV_HSMMC3) += dev-hsmmc3.o obj-$(CONFIG_S3C_DEV_HWMON) += dev-hwmon.o obj-y += dev-i2c0.o obj-$(CONFIG_S3C_DEV_I2C1) += dev-i2c1.o diff --git a/arch/arm/plat-samsung/dev-hsmmc3.c b/arch/arm/plat-samsung/dev-hsmmc3.c new file mode 100644 index 0000000..57bd394 --- /dev/null +++ b/arch/arm/plat-samsung/dev-hsmmc3.c @@ -0,0 +1,72 @@ +/* linux/arch/arm/plat-samsung/dev-hsmmc3.c + * + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * Copyright (c) 2008 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * http://armlinux.simtec.co.uk/ + * + * Based on arch/arm/plat-samsung/dev-hsmmc1.c + * + * Samsung device definition for hsmmc device 3 + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/kernel.h> +#include <linux/platform_device.h> +#include <linux/mmc/host.h> + +#include <mach/map.h> +#include <plat/sdhci.h> +#include <plat/devs.h> + +#define S3C_SZ_HSMMC (0x1000) + +static struct resource s3c_hsmmc3_resource[] = { + [0] = { + .start = S3C_PA_HSMMC3, + .end = S3C_PA_HSMMC3 + S3C_SZ_HSMMC - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_MMC3, + .end = IRQ_MMC3, + .flags = IORESOURCE_IRQ, + } +}; + +static u64 s3c_device_hsmmc3_dmamask = 0xffffffffUL; + +struct s3c_sdhci_platdata s3c_hsmmc3_def_platdata = { + .max_width = 4, + .host_caps = (MMC_CAP_4_BIT_DATA | + MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED), +}; + +struct platform_device s3c_device_hsmmc3 = { + .name = "s3c-sdhci", + .id = 3, + .num_resources = ARRAY_SIZE(s3c_hsmmc3_resource), + .resource = s3c_hsmmc3_resource, + .dev = { + .dma_mask = &s3c_device_hsmmc3_dmamask, + .coherent_dma_mask = 0xffffffffUL, + .platform_data = &s3c_hsmmc3_def_platdata, + }, +}; + +void s3c_sdhci3_set_platdata(struct s3c_sdhci_platdata *pd) +{ + struct s3c_sdhci_platdata *set = &s3c_hsmmc3_def_platdata; + + set->max_width = pd->max_width; + + if (pd->cfg_gpio) + set->cfg_gpio = pd->cfg_gpio; + if (pd->cfg_card) + set->cfg_card = pd->cfg_card; +} diff --git a/arch/arm/plat-samsung/include/plat/devs.h b/arch/arm/plat-samsung/include/plat/devs.h index e6144e4..7842acd 100644 --- a/arch/arm/plat-samsung/include/plat/devs.h +++ b/arch/arm/plat-samsung/include/plat/devs.h @@ -54,6 +54,7 @@ extern struct platform_device s3c_device_hwmon; extern struct platform_device s3c_device_hsmmc0; extern struct platform_device s3c_device_hsmmc1; extern struct platform_device s3c_device_hsmmc2; +extern struct platform_device s3c_device_hsmmc3; extern struct platform_device s3c_device_spi0; extern struct platform_device s3c_device_spi1; diff --git a/arch/arm/plat-samsung/include/plat/sdhci.h b/arch/arm/plat-samsung/include/plat/sdhci.h index 98ebd50..1314ffa 100644 --- a/arch/arm/plat-samsung/include/plat/sdhci.h +++ b/arch/arm/plat-samsung/include/plat/sdhci.h @@ -58,6 +58,7 @@ struct s3c_sdhci_platdata { extern void s3c_sdhci0_set_platdata(struct s3c_sdhci_platdata *pd); extern void s3c_sdhci1_set_platdata(struct s3c_sdhci_platdata *pd); extern void s3c_sdhci2_set_platdata(struct s3c_sdhci_platdata *pd); +extern void s3c_sdhci3_set_platdata(struct s3c_sdhci_platdata *pd); /* Default platform data, exported so that per-cpu initialisation can * set the correct one when there are more than one cpu type selected. @@ -66,6 +67,7 @@ extern void s3c_sdhci2_set_platdata(struct s3c_sdhci_platdata *pd); extern struct s3c_sdhci_platdata s3c_hsmmc0_def_platdata; extern struct s3c_sdhci_platdata s3c_hsmmc1_def_platdata; extern struct s3c_sdhci_platdata s3c_hsmmc2_def_platdata; +extern struct s3c_sdhci_platdata s3c_hsmmc3_def_platdata; /* Helper function availablity */ @@ -78,6 +80,7 @@ extern void s3c64xx_setup_sdhci2_cfg_gpio(struct platform_device *, int w); extern void s5pv210_setup_sdhci0_cfg_gpio(struct platform_device *, int w); extern void s5pv210_setup_sdhci1_cfg_gpio(struct platform_device *, int w); extern void s5pv210_setup_sdhci2_cfg_gpio(struct platform_device *, int w); +extern void s5pv210_setup_sdhci3_cfg_gpio(struct platform_device *, int w); /* S3C6400 SDHCI setup */ @@ -264,10 +267,22 @@ static inline void s5pv210_default_sdhci2(void) static inline void s5pv210_default_sdhci2(void) { } #endif /* CONFIG_S3C_DEV_HSMMC2 */ +#ifdef CONFIG_S3C_DEV_HSMMC3 +static inline void s5pv210_default_sdhci3(void) +{ + s3c_hsmmc3_def_platdata.clocks = s5pv210_hsmmc_clksrcs; + s3c_hsmmc3_def_platdata.cfg_gpio = s5pv210_setup_sdhci3_cfg_gpio; + s3c_hsmmc3_def_platdata.cfg_card = s5pv210_setup_sdhci_cfg_card; +} +#else +static inline void s5pv210_default_sdhci3(void) { } +#endif /* CONFIG_S3C_DEV_HSMMC3 */ + #else static inline void s5pv210_default_sdhci0(void) { } static inline void s5pv210_default_sdhci1(void) { } static inline void s5pv210_default_sdhci2(void) { } +static inline void s5pv210_default_sdhci3(void) { } #endif /* CONFIG_S5PC100_SETUP_SDHCI */ -- 1.6.2.5 ^ permalink raw reply related [flat|nested] 12+ messages in thread
* [PATCH v2 1/2] ARM: SAMSUNG: Add device definition for HSMMC3 @ 2010-07-03 0:07 ` Kukjin Kim 0 siblings, 0 replies; 12+ messages in thread From: Kukjin Kim @ 2010-07-03 0:07 UTC (permalink / raw) To: linux-arm-kernel From: Hyuk Lee <hyuk1.lee@samsung.com> This patch adds hsmmc3 device definition in plat-samsung. Because now S5PV210 can support 4 hsmmc such as hsmmc0, hsmmc1, hsmmc2 and hsmmc3 and that can be used in further Samsung SoCs. Signed-off-by: Hyuk Lee <hyuk1.lee@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> --- Changes since previous patch: - coding style fixes arch/arm/plat-samsung/Kconfig | 5 ++ arch/arm/plat-samsung/Makefile | 1 + arch/arm/plat-samsung/dev-hsmmc3.c | 72 ++++++++++++++++++++++++++++ arch/arm/plat-samsung/include/plat/devs.h | 1 + arch/arm/plat-samsung/include/plat/sdhci.h | 15 ++++++ 5 files changed, 94 insertions(+), 0 deletions(-) create mode 100644 arch/arm/plat-samsung/dev-hsmmc3.c diff --git a/arch/arm/plat-samsung/Kconfig b/arch/arm/plat-samsung/Kconfig index 2753fb3..8efb012 100644 --- a/arch/arm/plat-samsung/Kconfig +++ b/arch/arm/plat-samsung/Kconfig @@ -160,6 +160,11 @@ config S3C_DEV_HSMMC2 help Compile in platform device definitions for HSMMC channel 2 +config S3C_DEV_HSMMC3 + bool + help + Compile in platform device definitions for HSMMC channel 3 + config S3C_DEV_HWMON bool help diff --git a/arch/arm/plat-samsung/Makefile b/arch/arm/plat-samsung/Makefile index b1d82cc..c9abae5 100644 --- a/arch/arm/plat-samsung/Makefile +++ b/arch/arm/plat-samsung/Makefile @@ -33,6 +33,7 @@ obj-$(CONFIG_S3C_ADC) += adc.o obj-$(CONFIG_S3C_DEV_HSMMC) += dev-hsmmc.o obj-$(CONFIG_S3C_DEV_HSMMC1) += dev-hsmmc1.o obj-$(CONFIG_S3C_DEV_HSMMC2) += dev-hsmmc2.o +obj-$(CONFIG_S3C_DEV_HSMMC3) += dev-hsmmc3.o obj-$(CONFIG_S3C_DEV_HWMON) += dev-hwmon.o obj-y += dev-i2c0.o obj-$(CONFIG_S3C_DEV_I2C1) += dev-i2c1.o diff --git a/arch/arm/plat-samsung/dev-hsmmc3.c b/arch/arm/plat-samsung/dev-hsmmc3.c new file mode 100644 index 0000000..57bd394 --- /dev/null +++ b/arch/arm/plat-samsung/dev-hsmmc3.c @@ -0,0 +1,72 @@ +/* linux/arch/arm/plat-samsung/dev-hsmmc3.c + * + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * Copyright (c) 2008 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * http://armlinux.simtec.co.uk/ + * + * Based on arch/arm/plat-samsung/dev-hsmmc1.c + * + * Samsung device definition for hsmmc device 3 + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/kernel.h> +#include <linux/platform_device.h> +#include <linux/mmc/host.h> + +#include <mach/map.h> +#include <plat/sdhci.h> +#include <plat/devs.h> + +#define S3C_SZ_HSMMC (0x1000) + +static struct resource s3c_hsmmc3_resource[] = { + [0] = { + .start = S3C_PA_HSMMC3, + .end = S3C_PA_HSMMC3 + S3C_SZ_HSMMC - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_MMC3, + .end = IRQ_MMC3, + .flags = IORESOURCE_IRQ, + } +}; + +static u64 s3c_device_hsmmc3_dmamask = 0xffffffffUL; + +struct s3c_sdhci_platdata s3c_hsmmc3_def_platdata = { + .max_width = 4, + .host_caps = (MMC_CAP_4_BIT_DATA | + MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED), +}; + +struct platform_device s3c_device_hsmmc3 = { + .name = "s3c-sdhci", + .id = 3, + .num_resources = ARRAY_SIZE(s3c_hsmmc3_resource), + .resource = s3c_hsmmc3_resource, + .dev = { + .dma_mask = &s3c_device_hsmmc3_dmamask, + .coherent_dma_mask = 0xffffffffUL, + .platform_data = &s3c_hsmmc3_def_platdata, + }, +}; + +void s3c_sdhci3_set_platdata(struct s3c_sdhci_platdata *pd) +{ + struct s3c_sdhci_platdata *set = &s3c_hsmmc3_def_platdata; + + set->max_width = pd->max_width; + + if (pd->cfg_gpio) + set->cfg_gpio = pd->cfg_gpio; + if (pd->cfg_card) + set->cfg_card = pd->cfg_card; +} diff --git a/arch/arm/plat-samsung/include/plat/devs.h b/arch/arm/plat-samsung/include/plat/devs.h index e6144e4..7842acd 100644 --- a/arch/arm/plat-samsung/include/plat/devs.h +++ b/arch/arm/plat-samsung/include/plat/devs.h @@ -54,6 +54,7 @@ extern struct platform_device s3c_device_hwmon; extern struct platform_device s3c_device_hsmmc0; extern struct platform_device s3c_device_hsmmc1; extern struct platform_device s3c_device_hsmmc2; +extern struct platform_device s3c_device_hsmmc3; extern struct platform_device s3c_device_spi0; extern struct platform_device s3c_device_spi1; diff --git a/arch/arm/plat-samsung/include/plat/sdhci.h b/arch/arm/plat-samsung/include/plat/sdhci.h index 98ebd50..1314ffa 100644 --- a/arch/arm/plat-samsung/include/plat/sdhci.h +++ b/arch/arm/plat-samsung/include/plat/sdhci.h @@ -58,6 +58,7 @@ struct s3c_sdhci_platdata { extern void s3c_sdhci0_set_platdata(struct s3c_sdhci_platdata *pd); extern void s3c_sdhci1_set_platdata(struct s3c_sdhci_platdata *pd); extern void s3c_sdhci2_set_platdata(struct s3c_sdhci_platdata *pd); +extern void s3c_sdhci3_set_platdata(struct s3c_sdhci_platdata *pd); /* Default platform data, exported so that per-cpu initialisation can * set the correct one when there are more than one cpu type selected. @@ -66,6 +67,7 @@ extern void s3c_sdhci2_set_platdata(struct s3c_sdhci_platdata *pd); extern struct s3c_sdhci_platdata s3c_hsmmc0_def_platdata; extern struct s3c_sdhci_platdata s3c_hsmmc1_def_platdata; extern struct s3c_sdhci_platdata s3c_hsmmc2_def_platdata; +extern struct s3c_sdhci_platdata s3c_hsmmc3_def_platdata; /* Helper function availablity */ @@ -78,6 +80,7 @@ extern void s3c64xx_setup_sdhci2_cfg_gpio(struct platform_device *, int w); extern void s5pv210_setup_sdhci0_cfg_gpio(struct platform_device *, int w); extern void s5pv210_setup_sdhci1_cfg_gpio(struct platform_device *, int w); extern void s5pv210_setup_sdhci2_cfg_gpio(struct platform_device *, int w); +extern void s5pv210_setup_sdhci3_cfg_gpio(struct platform_device *, int w); /* S3C6400 SDHCI setup */ @@ -264,10 +267,22 @@ static inline void s5pv210_default_sdhci2(void) static inline void s5pv210_default_sdhci2(void) { } #endif /* CONFIG_S3C_DEV_HSMMC2 */ +#ifdef CONFIG_S3C_DEV_HSMMC3 +static inline void s5pv210_default_sdhci3(void) +{ + s3c_hsmmc3_def_platdata.clocks = s5pv210_hsmmc_clksrcs; + s3c_hsmmc3_def_platdata.cfg_gpio = s5pv210_setup_sdhci3_cfg_gpio; + s3c_hsmmc3_def_platdata.cfg_card = s5pv210_setup_sdhci_cfg_card; +} +#else +static inline void s5pv210_default_sdhci3(void) { } +#endif /* CONFIG_S3C_DEV_HSMMC3 */ + #else static inline void s5pv210_default_sdhci0(void) { } static inline void s5pv210_default_sdhci1(void) { } static inline void s5pv210_default_sdhci2(void) { } +static inline void s5pv210_default_sdhci3(void) { } #endif /* CONFIG_S5PC100_SETUP_SDHCI */ -- 1.6.2.5 ^ permalink raw reply related [flat|nested] 12+ messages in thread
* Re: [PATCH v2 1/2] ARM: SAMSUNG: Add device definition for HSMMC3 2010-07-03 0:07 ` Kukjin Kim @ 2010-07-03 0:17 ` Maurus Cuelenaere -1 siblings, 0 replies; 12+ messages in thread From: Maurus Cuelenaere @ 2010-07-03 0:17 UTC (permalink / raw) To: Kukjin Kim; +Cc: linux-arm-kernel, linux-samsung-soc, ben-linux, Hyuk Lee Op 03-07-10 02:07, Kukjin Kim schreef: > From: Hyuk Lee <hyuk1.lee@samsung.com> > > This patch adds hsmmc3 device definition in plat-samsung. Because now > S5PV210 can support 4 hsmmc such as hsmmc0, hsmmc1, hsmmc2 and hsmmc3 > and that can be used in further Samsung SoCs. > > Signed-off-by: Hyuk Lee <hyuk1.lee@samsung.com> > Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> > --- > Changes since previous patch: > > - coding style fixes > > arch/arm/plat-samsung/Kconfig | 5 ++ > arch/arm/plat-samsung/Makefile | 1 + > arch/arm/plat-samsung/dev-hsmmc3.c | 72 ++++++++++++++++++++++++++++ > arch/arm/plat-samsung/include/plat/devs.h | 1 + > arch/arm/plat-samsung/include/plat/sdhci.h | 15 ++++++ > 5 files changed, 94 insertions(+), 0 deletions(-) > create mode 100644 arch/arm/plat-samsung/dev-hsmmc3.c > > diff --git a/arch/arm/plat-samsung/Kconfig b/arch/arm/plat-samsung/Kconfig > index 2753fb3..8efb012 100644 > --- a/arch/arm/plat-samsung/Kconfig > +++ b/arch/arm/plat-samsung/Kconfig > @@ -160,6 +160,11 @@ config S3C_DEV_HSMMC2 > help > Compile in platform device definitions for HSMMC channel 2 > > +config S3C_DEV_HSMMC3 > + bool > + help > + Compile in platform device definitions for HSMMC channel 3 > + > config S3C_DEV_HWMON > bool > help > diff --git a/arch/arm/plat-samsung/Makefile b/arch/arm/plat-samsung/Makefile > index b1d82cc..c9abae5 100644 > --- a/arch/arm/plat-samsung/Makefile > +++ b/arch/arm/plat-samsung/Makefile > @@ -33,6 +33,7 @@ obj-$(CONFIG_S3C_ADC) += adc.o > obj-$(CONFIG_S3C_DEV_HSMMC) += dev-hsmmc.o > obj-$(CONFIG_S3C_DEV_HSMMC1) += dev-hsmmc1.o > obj-$(CONFIG_S3C_DEV_HSMMC2) += dev-hsmmc2.o > +obj-$(CONFIG_S3C_DEV_HSMMC3) += dev-hsmmc3.o > obj-$(CONFIG_S3C_DEV_HWMON) += dev-hwmon.o > obj-y += dev-i2c0.o > obj-$(CONFIG_S3C_DEV_I2C1) += dev-i2c1.o > diff --git a/arch/arm/plat-samsung/dev-hsmmc3.c b/arch/arm/plat-samsung/dev-hsmmc3.c > new file mode 100644 > index 0000000..57bd394 > --- /dev/null > +++ b/arch/arm/plat-samsung/dev-hsmmc3.c > @@ -0,0 +1,72 @@ > +/* linux/arch/arm/plat-samsung/dev-hsmmc3.c > + * > + * Copyright (c) 2010 Samsung Electronics Co., Ltd. > + * http://www.samsung.com > + * > + * Copyright (c) 2008 Simtec Electronics > + * Ben Dooks <ben@simtec.co.uk> > + * http://armlinux.simtec.co.uk/ > + * > + * Based on arch/arm/plat-samsung/dev-hsmmc1.c > + * > + * Samsung device definition for hsmmc device 3 > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License version 2 as > + * published by the Free Software Foundation. > +*/ > + > +#include <linux/kernel.h> > +#include <linux/platform_device.h> > +#include <linux/mmc/host.h> > + > +#include <mach/map.h> > +#include <plat/sdhci.h> > +#include <plat/devs.h> > + > +#define S3C_SZ_HSMMC (0x1000) > + > +static struct resource s3c_hsmmc3_resource[] = { > + [0] = { > + .start = S3C_PA_HSMMC3, > + .end = S3C_PA_HSMMC3 + S3C_SZ_HSMMC - 1, > + .flags = IORESOURCE_MEM, > + }, > + [1] = { > + .start = IRQ_MMC3, > + .end = IRQ_MMC3, > + .flags = IORESOURCE_IRQ, > + } > +}; > + > +static u64 s3c_device_hsmmc3_dmamask = 0xffffffffUL; > + > +struct s3c_sdhci_platdata s3c_hsmmc3_def_platdata = { > + .max_width = 4, > + .host_caps = (MMC_CAP_4_BIT_DATA | > + MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED), > +}; > + > +struct platform_device s3c_device_hsmmc3 = { > + .name = "s3c-sdhci", > + .id = 3, > + .num_resources = ARRAY_SIZE(s3c_hsmmc3_resource), > + .resource = s3c_hsmmc3_resource, > + .dev = { > + .dma_mask = &s3c_device_hsmmc3_dmamask, > + .coherent_dma_mask = 0xffffffffUL, > + .platform_data = &s3c_hsmmc3_def_platdata, > + }, > +}; > + > +void s3c_sdhci3_set_platdata(struct s3c_sdhci_platdata *pd) > +{ > + struct s3c_sdhci_platdata *set = &s3c_hsmmc3_def_platdata; > + > + set->max_width = pd->max_width; > + > + if (pd->cfg_gpio) > + set->cfg_gpio = pd->cfg_gpio; > + if (pd->cfg_card) > + set->cfg_card = pd->cfg_card; > +} > diff --git a/arch/arm/plat-samsung/include/plat/devs.h b/arch/arm/plat-samsung/include/plat/devs.h > index e6144e4..7842acd 100644 > --- a/arch/arm/plat-samsung/include/plat/devs.h > +++ b/arch/arm/plat-samsung/include/plat/devs.h > @@ -54,6 +54,7 @@ extern struct platform_device s3c_device_hwmon; > extern struct platform_device s3c_device_hsmmc0; > extern struct platform_device s3c_device_hsmmc1; > extern struct platform_device s3c_device_hsmmc2; > +extern struct platform_device s3c_device_hsmmc3; > > extern struct platform_device s3c_device_spi0; > extern struct platform_device s3c_device_spi1; > diff --git a/arch/arm/plat-samsung/include/plat/sdhci.h b/arch/arm/plat-samsung/include/plat/sdhci.h > index 98ebd50..1314ffa 100644 > --- a/arch/arm/plat-samsung/include/plat/sdhci.h > +++ b/arch/arm/plat-samsung/include/plat/sdhci.h > @@ -58,6 +58,7 @@ struct s3c_sdhci_platdata { > extern void s3c_sdhci0_set_platdata(struct s3c_sdhci_platdata *pd); > extern void s3c_sdhci1_set_platdata(struct s3c_sdhci_platdata *pd); > extern void s3c_sdhci2_set_platdata(struct s3c_sdhci_platdata *pd); > +extern void s3c_sdhci3_set_platdata(struct s3c_sdhci_platdata *pd); > > /* Default platform data, exported so that per-cpu initialisation can > * set the correct one when there are more than one cpu type selected. > @@ -66,6 +67,7 @@ extern void s3c_sdhci2_set_platdata(struct s3c_sdhci_platdata *pd); > extern struct s3c_sdhci_platdata s3c_hsmmc0_def_platdata; > extern struct s3c_sdhci_platdata s3c_hsmmc1_def_platdata; > extern struct s3c_sdhci_platdata s3c_hsmmc2_def_platdata; > +extern struct s3c_sdhci_platdata s3c_hsmmc3_def_platdata; > > /* Helper function availablity */ > > @@ -78,6 +80,7 @@ extern void s3c64xx_setup_sdhci2_cfg_gpio(struct platform_device *, int w); > extern void s5pv210_setup_sdhci0_cfg_gpio(struct platform_device *, int w); > extern void s5pv210_setup_sdhci1_cfg_gpio(struct platform_device *, int w); > extern void s5pv210_setup_sdhci2_cfg_gpio(struct platform_device *, int w); > +extern void s5pv210_setup_sdhci3_cfg_gpio(struct platform_device *, int w); Shouldn't this be in PATCH 2/2? > > /* S3C6400 SDHCI setup */ > > @@ -264,10 +267,22 @@ static inline void s5pv210_default_sdhci2(void) > static inline void s5pv210_default_sdhci2(void) { } > #endif /* CONFIG_S3C_DEV_HSMMC2 */ > > +#ifdef CONFIG_S3C_DEV_HSMMC3 > +static inline void s5pv210_default_sdhci3(void) > +{ > + s3c_hsmmc3_def_platdata.clocks = s5pv210_hsmmc_clksrcs; > + s3c_hsmmc3_def_platdata.cfg_gpio = s5pv210_setup_sdhci3_cfg_gpio; > + s3c_hsmmc3_def_platdata.cfg_card = s5pv210_setup_sdhci_cfg_card; > +} > +#else > +static inline void s5pv210_default_sdhci3(void) { } > +#endif /* CONFIG_S3C_DEV_HSMMC3 */ This could be simplified by putting the #ifdef inside the function. Also, same comment as above. > + > #else > static inline void s5pv210_default_sdhci0(void) { } > static inline void s5pv210_default_sdhci1(void) { } > static inline void s5pv210_default_sdhci2(void) { } > +static inline void s5pv210_default_sdhci3(void) { } > #endif /* CONFIG_S5PC100_SETUP_SDHCI */ > > -- Maurus Cuelenaere ^ permalink raw reply [flat|nested] 12+ messages in thread
* [PATCH v2 1/2] ARM: SAMSUNG: Add device definition for HSMMC3 @ 2010-07-03 0:17 ` Maurus Cuelenaere 0 siblings, 0 replies; 12+ messages in thread From: Maurus Cuelenaere @ 2010-07-03 0:17 UTC (permalink / raw) To: linux-arm-kernel Op 03-07-10 02:07, Kukjin Kim schreef: > From: Hyuk Lee <hyuk1.lee@samsung.com> > > This patch adds hsmmc3 device definition in plat-samsung. Because now > S5PV210 can support 4 hsmmc such as hsmmc0, hsmmc1, hsmmc2 and hsmmc3 > and that can be used in further Samsung SoCs. > > Signed-off-by: Hyuk Lee <hyuk1.lee@samsung.com> > Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> > --- > Changes since previous patch: > > - coding style fixes > > arch/arm/plat-samsung/Kconfig | 5 ++ > arch/arm/plat-samsung/Makefile | 1 + > arch/arm/plat-samsung/dev-hsmmc3.c | 72 ++++++++++++++++++++++++++++ > arch/arm/plat-samsung/include/plat/devs.h | 1 + > arch/arm/plat-samsung/include/plat/sdhci.h | 15 ++++++ > 5 files changed, 94 insertions(+), 0 deletions(-) > create mode 100644 arch/arm/plat-samsung/dev-hsmmc3.c > > diff --git a/arch/arm/plat-samsung/Kconfig b/arch/arm/plat-samsung/Kconfig > index 2753fb3..8efb012 100644 > --- a/arch/arm/plat-samsung/Kconfig > +++ b/arch/arm/plat-samsung/Kconfig > @@ -160,6 +160,11 @@ config S3C_DEV_HSMMC2 > help > Compile in platform device definitions for HSMMC channel 2 > > +config S3C_DEV_HSMMC3 > + bool > + help > + Compile in platform device definitions for HSMMC channel 3 > + > config S3C_DEV_HWMON > bool > help > diff --git a/arch/arm/plat-samsung/Makefile b/arch/arm/plat-samsung/Makefile > index b1d82cc..c9abae5 100644 > --- a/arch/arm/plat-samsung/Makefile > +++ b/arch/arm/plat-samsung/Makefile > @@ -33,6 +33,7 @@ obj-$(CONFIG_S3C_ADC) += adc.o > obj-$(CONFIG_S3C_DEV_HSMMC) += dev-hsmmc.o > obj-$(CONFIG_S3C_DEV_HSMMC1) += dev-hsmmc1.o > obj-$(CONFIG_S3C_DEV_HSMMC2) += dev-hsmmc2.o > +obj-$(CONFIG_S3C_DEV_HSMMC3) += dev-hsmmc3.o > obj-$(CONFIG_S3C_DEV_HWMON) += dev-hwmon.o > obj-y += dev-i2c0.o > obj-$(CONFIG_S3C_DEV_I2C1) += dev-i2c1.o > diff --git a/arch/arm/plat-samsung/dev-hsmmc3.c b/arch/arm/plat-samsung/dev-hsmmc3.c > new file mode 100644 > index 0000000..57bd394 > --- /dev/null > +++ b/arch/arm/plat-samsung/dev-hsmmc3.c > @@ -0,0 +1,72 @@ > +/* linux/arch/arm/plat-samsung/dev-hsmmc3.c > + * > + * Copyright (c) 2010 Samsung Electronics Co., Ltd. > + * http://www.samsung.com > + * > + * Copyright (c) 2008 Simtec Electronics > + * Ben Dooks <ben@simtec.co.uk> > + * http://armlinux.simtec.co.uk/ > + * > + * Based on arch/arm/plat-samsung/dev-hsmmc1.c > + * > + * Samsung device definition for hsmmc device 3 > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License version 2 as > + * published by the Free Software Foundation. > +*/ > + > +#include <linux/kernel.h> > +#include <linux/platform_device.h> > +#include <linux/mmc/host.h> > + > +#include <mach/map.h> > +#include <plat/sdhci.h> > +#include <plat/devs.h> > + > +#define S3C_SZ_HSMMC (0x1000) > + > +static struct resource s3c_hsmmc3_resource[] = { > + [0] = { > + .start = S3C_PA_HSMMC3, > + .end = S3C_PA_HSMMC3 + S3C_SZ_HSMMC - 1, > + .flags = IORESOURCE_MEM, > + }, > + [1] = { > + .start = IRQ_MMC3, > + .end = IRQ_MMC3, > + .flags = IORESOURCE_IRQ, > + } > +}; > + > +static u64 s3c_device_hsmmc3_dmamask = 0xffffffffUL; > + > +struct s3c_sdhci_platdata s3c_hsmmc3_def_platdata = { > + .max_width = 4, > + .host_caps = (MMC_CAP_4_BIT_DATA | > + MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED), > +}; > + > +struct platform_device s3c_device_hsmmc3 = { > + .name = "s3c-sdhci", > + .id = 3, > + .num_resources = ARRAY_SIZE(s3c_hsmmc3_resource), > + .resource = s3c_hsmmc3_resource, > + .dev = { > + .dma_mask = &s3c_device_hsmmc3_dmamask, > + .coherent_dma_mask = 0xffffffffUL, > + .platform_data = &s3c_hsmmc3_def_platdata, > + }, > +}; > + > +void s3c_sdhci3_set_platdata(struct s3c_sdhci_platdata *pd) > +{ > + struct s3c_sdhci_platdata *set = &s3c_hsmmc3_def_platdata; > + > + set->max_width = pd->max_width; > + > + if (pd->cfg_gpio) > + set->cfg_gpio = pd->cfg_gpio; > + if (pd->cfg_card) > + set->cfg_card = pd->cfg_card; > +} > diff --git a/arch/arm/plat-samsung/include/plat/devs.h b/arch/arm/plat-samsung/include/plat/devs.h > index e6144e4..7842acd 100644 > --- a/arch/arm/plat-samsung/include/plat/devs.h > +++ b/arch/arm/plat-samsung/include/plat/devs.h > @@ -54,6 +54,7 @@ extern struct platform_device s3c_device_hwmon; > extern struct platform_device s3c_device_hsmmc0; > extern struct platform_device s3c_device_hsmmc1; > extern struct platform_device s3c_device_hsmmc2; > +extern struct platform_device s3c_device_hsmmc3; > > extern struct platform_device s3c_device_spi0; > extern struct platform_device s3c_device_spi1; > diff --git a/arch/arm/plat-samsung/include/plat/sdhci.h b/arch/arm/plat-samsung/include/plat/sdhci.h > index 98ebd50..1314ffa 100644 > --- a/arch/arm/plat-samsung/include/plat/sdhci.h > +++ b/arch/arm/plat-samsung/include/plat/sdhci.h > @@ -58,6 +58,7 @@ struct s3c_sdhci_platdata { > extern void s3c_sdhci0_set_platdata(struct s3c_sdhci_platdata *pd); > extern void s3c_sdhci1_set_platdata(struct s3c_sdhci_platdata *pd); > extern void s3c_sdhci2_set_platdata(struct s3c_sdhci_platdata *pd); > +extern void s3c_sdhci3_set_platdata(struct s3c_sdhci_platdata *pd); > > /* Default platform data, exported so that per-cpu initialisation can > * set the correct one when there are more than one cpu type selected. > @@ -66,6 +67,7 @@ extern void s3c_sdhci2_set_platdata(struct s3c_sdhci_platdata *pd); > extern struct s3c_sdhci_platdata s3c_hsmmc0_def_platdata; > extern struct s3c_sdhci_platdata s3c_hsmmc1_def_platdata; > extern struct s3c_sdhci_platdata s3c_hsmmc2_def_platdata; > +extern struct s3c_sdhci_platdata s3c_hsmmc3_def_platdata; > > /* Helper function availablity */ > > @@ -78,6 +80,7 @@ extern void s3c64xx_setup_sdhci2_cfg_gpio(struct platform_device *, int w); > extern void s5pv210_setup_sdhci0_cfg_gpio(struct platform_device *, int w); > extern void s5pv210_setup_sdhci1_cfg_gpio(struct platform_device *, int w); > extern void s5pv210_setup_sdhci2_cfg_gpio(struct platform_device *, int w); > +extern void s5pv210_setup_sdhci3_cfg_gpio(struct platform_device *, int w); Shouldn't this be in PATCH 2/2? > > /* S3C6400 SDHCI setup */ > > @@ -264,10 +267,22 @@ static inline void s5pv210_default_sdhci2(void) > static inline void s5pv210_default_sdhci2(void) { } > #endif /* CONFIG_S3C_DEV_HSMMC2 */ > > +#ifdef CONFIG_S3C_DEV_HSMMC3 > +static inline void s5pv210_default_sdhci3(void) > +{ > + s3c_hsmmc3_def_platdata.clocks = s5pv210_hsmmc_clksrcs; > + s3c_hsmmc3_def_platdata.cfg_gpio = s5pv210_setup_sdhci3_cfg_gpio; > + s3c_hsmmc3_def_platdata.cfg_card = s5pv210_setup_sdhci_cfg_card; > +} > +#else > +static inline void s5pv210_default_sdhci3(void) { } > +#endif /* CONFIG_S3C_DEV_HSMMC3 */ This could be simplified by putting the #ifdef inside the function. Also, same comment as above. > + > #else > static inline void s5pv210_default_sdhci0(void) { } > static inline void s5pv210_default_sdhci1(void) { } > static inline void s5pv210_default_sdhci2(void) { } > +static inline void s5pv210_default_sdhci3(void) { } > #endif /* CONFIG_S5PC100_SETUP_SDHCI */ > > -- Maurus Cuelenaere ^ permalink raw reply [flat|nested] 12+ messages in thread
* RE: [PATCH v2 1/2] ARM: SAMSUNG: Add device definition for HSMMC3 2010-07-03 0:17 ` Maurus Cuelenaere @ 2010-07-03 1:21 ` Kukjin Kim -1 siblings, 0 replies; 12+ messages in thread From: Kukjin Kim @ 2010-07-03 1:21 UTC (permalink / raw) To: 'Maurus Cuelenaere' Cc: linux-arm-kernel, linux-samsung-soc, ben-linux, 'Hyuk Lee' Maurus Cuelenaere wrote: > > Op 03-07-10 02:07, Kukjin Kim schreef: > > From: Hyuk Lee <hyuk1.lee@samsung.com> > > > > This patch adds hsmmc3 device definition in plat-samsung. Because now > > S5PV210 can support 4 hsmmc such as hsmmc0, hsmmc1, hsmmc2 and > hsmmc3 > > and that can be used in further Samsung SoCs. > > > > Signed-off-by: Hyuk Lee <hyuk1.lee@samsung.com> > > Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> > > --- > > Changes since previous patch: > > > > - coding style fixes > > > > arch/arm/plat-samsung/Kconfig | 5 ++ > > arch/arm/plat-samsung/Makefile | 1 + > > arch/arm/plat-samsung/dev-hsmmc3.c | 72 > ++++++++++++++++++++++++++++ > > arch/arm/plat-samsung/include/plat/devs.h | 1 + > > arch/arm/plat-samsung/include/plat/sdhci.h | 15 ++++++ > > 5 files changed, 94 insertions(+), 0 deletions(-) > > create mode 100644 arch/arm/plat-samsung/dev-hsmmc3.c > > > > diff --git a/arch/arm/plat-samsung/Kconfig b/arch/arm/plat-samsung/Kconfig > > index 2753fb3..8efb012 100644 > > --- a/arch/arm/plat-samsung/Kconfig > > +++ b/arch/arm/plat-samsung/Kconfig > > @@ -160,6 +160,11 @@ config S3C_DEV_HSMMC2 > > help > > Compile in platform device definitions for HSMMC channel 2 > > > > +config S3C_DEV_HSMMC3 > > + bool > > + help > > + Compile in platform device definitions for HSMMC channel 3 > > + > > config S3C_DEV_HWMON > > bool > > help > > diff --git a/arch/arm/plat-samsung/Makefile b/arch/arm/plat-samsung/Makefile > > index b1d82cc..c9abae5 100644 > > --- a/arch/arm/plat-samsung/Makefile > > +++ b/arch/arm/plat-samsung/Makefile > > @@ -33,6 +33,7 @@ obj-$(CONFIG_S3C_ADC) += adc.o > > obj-$(CONFIG_S3C_DEV_HSMMC) += dev-hsmmc.o > > obj-$(CONFIG_S3C_DEV_HSMMC1) += dev-hsmmc1.o > > obj-$(CONFIG_S3C_DEV_HSMMC2) += dev-hsmmc2.o > > +obj-$(CONFIG_S3C_DEV_HSMMC3) += dev-hsmmc3.o > > obj-$(CONFIG_S3C_DEV_HWMON) += dev-hwmon.o > > obj-y += dev-i2c0.o > > obj-$(CONFIG_S3C_DEV_I2C1) += dev-i2c1.o > > diff --git a/arch/arm/plat-samsung/dev-hsmmc3.c b/arch/arm/plat-samsung/dev- > hsmmc3.c > > new file mode 100644 > > index 0000000..57bd394 > > --- /dev/null > > +++ b/arch/arm/plat-samsung/dev-hsmmc3.c > > @@ -0,0 +1,72 @@ > > +/* linux/arch/arm/plat-samsung/dev-hsmmc3.c > > + * > > + * Copyright (c) 2010 Samsung Electronics Co., Ltd. > > + * http://www.samsung.com > > + * > > + * Copyright (c) 2008 Simtec Electronics > > + * Ben Dooks <ben@simtec.co.uk> > > + * http://armlinux.simtec.co.uk/ > > + * > > + * Based on arch/arm/plat-samsung/dev-hsmmc1.c > > + * > > + * Samsung device definition for hsmmc device 3 > > + * > > + * This program is free software; you can redistribute it and/or modify > > + * it under the terms of the GNU General Public License version 2 as > > + * published by the Free Software Foundation. > > +*/ > > + > > +#include <linux/kernel.h> > > +#include <linux/platform_device.h> > > +#include <linux/mmc/host.h> > > + > > +#include <mach/map.h> > > +#include <plat/sdhci.h> > > +#include <plat/devs.h> > > + > > +#define S3C_SZ_HSMMC (0x1000) > > + > > +static struct resource s3c_hsmmc3_resource[] = { > > + [0] = { > > + .start = S3C_PA_HSMMC3, > > + .end = S3C_PA_HSMMC3 + S3C_SZ_HSMMC - 1, > > + .flags = IORESOURCE_MEM, > > + }, > > + [1] = { > > + .start = IRQ_MMC3, > > + .end = IRQ_MMC3, > > + .flags = IORESOURCE_IRQ, > > + } > > +}; > > + > > +static u64 s3c_device_hsmmc3_dmamask = 0xffffffffUL; > > + > > +struct s3c_sdhci_platdata s3c_hsmmc3_def_platdata = { > > + .max_width = 4, > > + .host_caps = (MMC_CAP_4_BIT_DATA | > > + MMC_CAP_MMC_HIGHSPEED | > MMC_CAP_SD_HIGHSPEED), > > +}; > > + > > +struct platform_device s3c_device_hsmmc3 = { > > + .name = "s3c-sdhci", > > + .id = 3, > > + .num_resources = ARRAY_SIZE(s3c_hsmmc3_resource), > > + .resource = s3c_hsmmc3_resource, > > + .dev = { > > + .dma_mask = &s3c_device_hsmmc3_dmamask, > > + .coherent_dma_mask = 0xffffffffUL, > > + .platform_data = &s3c_hsmmc3_def_platdata, > > + }, > > +}; > > + > > +void s3c_sdhci3_set_platdata(struct s3c_sdhci_platdata *pd) > > +{ > > + struct s3c_sdhci_platdata *set = &s3c_hsmmc3_def_platdata; > > + > > + set->max_width = pd->max_width; > > + > > + if (pd->cfg_gpio) > > + set->cfg_gpio = pd->cfg_gpio; > > + if (pd->cfg_card) > > + set->cfg_card = pd->cfg_card; > > +} > > diff --git a/arch/arm/plat-samsung/include/plat/devs.h b/arch/arm/plat- > samsung/include/plat/devs.h > > index e6144e4..7842acd 100644 > > --- a/arch/arm/plat-samsung/include/plat/devs.h > > +++ b/arch/arm/plat-samsung/include/plat/devs.h > > @@ -54,6 +54,7 @@ extern struct platform_device s3c_device_hwmon; > > extern struct platform_device s3c_device_hsmmc0; > > extern struct platform_device s3c_device_hsmmc1; > > extern struct platform_device s3c_device_hsmmc2; > > +extern struct platform_device s3c_device_hsmmc3; > > > > extern struct platform_device s3c_device_spi0; > > extern struct platform_device s3c_device_spi1; > > diff --git a/arch/arm/plat-samsung/include/plat/sdhci.h b/arch/arm/plat- > samsung/include/plat/sdhci.h > > index 98ebd50..1314ffa 100644 > > --- a/arch/arm/plat-samsung/include/plat/sdhci.h > > +++ b/arch/arm/plat-samsung/include/plat/sdhci.h > > @@ -58,6 +58,7 @@ struct s3c_sdhci_platdata { > > extern void s3c_sdhci0_set_platdata(struct s3c_sdhci_platdata *pd); > > extern void s3c_sdhci1_set_platdata(struct s3c_sdhci_platdata *pd); > > extern void s3c_sdhci2_set_platdata(struct s3c_sdhci_platdata *pd); > > +extern void s3c_sdhci3_set_platdata(struct s3c_sdhci_platdata *pd); > > > > /* Default platform data, exported so that per-cpu initialisation can > > * set the correct one when there are more than one cpu type selected. > > @@ -66,6 +67,7 @@ extern void s3c_sdhci2_set_platdata(struct > s3c_sdhci_platdata *pd); > > extern struct s3c_sdhci_platdata s3c_hsmmc0_def_platdata; > > extern struct s3c_sdhci_platdata s3c_hsmmc1_def_platdata; > > extern struct s3c_sdhci_platdata s3c_hsmmc2_def_platdata; > > +extern struct s3c_sdhci_platdata s3c_hsmmc3_def_platdata; > > > > /* Helper function availablity */ > > > > @@ -78,6 +80,7 @@ extern void s3c64xx_setup_sdhci2_cfg_gpio(struct > platform_device *, int w); > > extern void s5pv210_setup_sdhci0_cfg_gpio(struct platform_device *, int w); > > extern void s5pv210_setup_sdhci1_cfg_gpio(struct platform_device *, int w); > > extern void s5pv210_setup_sdhci2_cfg_gpio(struct platform_device *, int w); > > +extern void s5pv210_setup_sdhci3_cfg_gpio(struct platform_device *, int w); > > Shouldn't this be in PATCH 2/2? > You're right, but I was thinking this is better to handle this. ...will move this into second. > > > > /* S3C6400 SDHCI setup */ > > > > @@ -264,10 +267,22 @@ static inline void s5pv210_default_sdhci2(void) > > static inline void s5pv210_default_sdhci2(void) { } > > #endif /* CONFIG_S3C_DEV_HSMMC2 */ > > > > +#ifdef CONFIG_S3C_DEV_HSMMC3 > > +static inline void s5pv210_default_sdhci3(void) > > +{ > > + s3c_hsmmc3_def_platdata.clocks = s5pv210_hsmmc_clksrcs; > > + s3c_hsmmc3_def_platdata.cfg_gpio = s5pv210_setup_sdhci3_cfg_gpio; > > + s3c_hsmmc3_def_platdata.cfg_card = s5pv210_setup_sdhci_cfg_card; > > +} > > +#else > > +static inline void s5pv210_default_sdhci3(void) { } > > +#endif /* CONFIG_S3C_DEV_HSMMC3 */ > > This could be simplified by putting the #ifdef inside the function. Yeah, you're right..but used same style with others in this file. ...so will modify it as your comment with others soon. > Also, same comment as above. > OK. > > + > > #else > > static inline void s5pv210_default_sdhci0(void) { } > > static inline void s5pv210_default_sdhci1(void) { } > > static inline void s5pv210_default_sdhci2(void) { } > > +static inline void s5pv210_default_sdhci3(void) { } > > #endif /* CONFIG_S5PC100_SETUP_SDHCI */ > > > > > > > -- Thanks. Best regards, Kgene. -- Kukjin Kim <kgene.kim@samsung.com>, Senior Engineer, SW Solution Development Team, Samsung Electronics Co., Ltd. ^ permalink raw reply [flat|nested] 12+ messages in thread
* [PATCH v2 1/2] ARM: SAMSUNG: Add device definition for HSMMC3 @ 2010-07-03 1:21 ` Kukjin Kim 0 siblings, 0 replies; 12+ messages in thread From: Kukjin Kim @ 2010-07-03 1:21 UTC (permalink / raw) To: linux-arm-kernel Maurus Cuelenaere wrote: > > Op 03-07-10 02:07, Kukjin Kim schreef: > > From: Hyuk Lee <hyuk1.lee@samsung.com> > > > > This patch adds hsmmc3 device definition in plat-samsung. Because now > > S5PV210 can support 4 hsmmc such as hsmmc0, hsmmc1, hsmmc2 and > hsmmc3 > > and that can be used in further Samsung SoCs. > > > > Signed-off-by: Hyuk Lee <hyuk1.lee@samsung.com> > > Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> > > --- > > Changes since previous patch: > > > > - coding style fixes > > > > arch/arm/plat-samsung/Kconfig | 5 ++ > > arch/arm/plat-samsung/Makefile | 1 + > > arch/arm/plat-samsung/dev-hsmmc3.c | 72 > ++++++++++++++++++++++++++++ > > arch/arm/plat-samsung/include/plat/devs.h | 1 + > > arch/arm/plat-samsung/include/plat/sdhci.h | 15 ++++++ > > 5 files changed, 94 insertions(+), 0 deletions(-) > > create mode 100644 arch/arm/plat-samsung/dev-hsmmc3.c > > > > diff --git a/arch/arm/plat-samsung/Kconfig b/arch/arm/plat-samsung/Kconfig > > index 2753fb3..8efb012 100644 > > --- a/arch/arm/plat-samsung/Kconfig > > +++ b/arch/arm/plat-samsung/Kconfig > > @@ -160,6 +160,11 @@ config S3C_DEV_HSMMC2 > > help > > Compile in platform device definitions for HSMMC channel 2 > > > > +config S3C_DEV_HSMMC3 > > + bool > > + help > > + Compile in platform device definitions for HSMMC channel 3 > > + > > config S3C_DEV_HWMON > > bool > > help > > diff --git a/arch/arm/plat-samsung/Makefile b/arch/arm/plat-samsung/Makefile > > index b1d82cc..c9abae5 100644 > > --- a/arch/arm/plat-samsung/Makefile > > +++ b/arch/arm/plat-samsung/Makefile > > @@ -33,6 +33,7 @@ obj-$(CONFIG_S3C_ADC) += adc.o > > obj-$(CONFIG_S3C_DEV_HSMMC) += dev-hsmmc.o > > obj-$(CONFIG_S3C_DEV_HSMMC1) += dev-hsmmc1.o > > obj-$(CONFIG_S3C_DEV_HSMMC2) += dev-hsmmc2.o > > +obj-$(CONFIG_S3C_DEV_HSMMC3) += dev-hsmmc3.o > > obj-$(CONFIG_S3C_DEV_HWMON) += dev-hwmon.o > > obj-y += dev-i2c0.o > > obj-$(CONFIG_S3C_DEV_I2C1) += dev-i2c1.o > > diff --git a/arch/arm/plat-samsung/dev-hsmmc3.c b/arch/arm/plat-samsung/dev- > hsmmc3.c > > new file mode 100644 > > index 0000000..57bd394 > > --- /dev/null > > +++ b/arch/arm/plat-samsung/dev-hsmmc3.c > > @@ -0,0 +1,72 @@ > > +/* linux/arch/arm/plat-samsung/dev-hsmmc3.c > > + * > > + * Copyright (c) 2010 Samsung Electronics Co., Ltd. > > + * http://www.samsung.com > > + * > > + * Copyright (c) 2008 Simtec Electronics > > + * Ben Dooks <ben@simtec.co.uk> > > + * http://armlinux.simtec.co.uk/ > > + * > > + * Based on arch/arm/plat-samsung/dev-hsmmc1.c > > + * > > + * Samsung device definition for hsmmc device 3 > > + * > > + * This program is free software; you can redistribute it and/or modify > > + * it under the terms of the GNU General Public License version 2 as > > + * published by the Free Software Foundation. > > +*/ > > + > > +#include <linux/kernel.h> > > +#include <linux/platform_device.h> > > +#include <linux/mmc/host.h> > > + > > +#include <mach/map.h> > > +#include <plat/sdhci.h> > > +#include <plat/devs.h> > > + > > +#define S3C_SZ_HSMMC (0x1000) > > + > > +static struct resource s3c_hsmmc3_resource[] = { > > + [0] = { > > + .start = S3C_PA_HSMMC3, > > + .end = S3C_PA_HSMMC3 + S3C_SZ_HSMMC - 1, > > + .flags = IORESOURCE_MEM, > > + }, > > + [1] = { > > + .start = IRQ_MMC3, > > + .end = IRQ_MMC3, > > + .flags = IORESOURCE_IRQ, > > + } > > +}; > > + > > +static u64 s3c_device_hsmmc3_dmamask = 0xffffffffUL; > > + > > +struct s3c_sdhci_platdata s3c_hsmmc3_def_platdata = { > > + .max_width = 4, > > + .host_caps = (MMC_CAP_4_BIT_DATA | > > + MMC_CAP_MMC_HIGHSPEED | > MMC_CAP_SD_HIGHSPEED), > > +}; > > + > > +struct platform_device s3c_device_hsmmc3 = { > > + .name = "s3c-sdhci", > > + .id = 3, > > + .num_resources = ARRAY_SIZE(s3c_hsmmc3_resource), > > + .resource = s3c_hsmmc3_resource, > > + .dev = { > > + .dma_mask = &s3c_device_hsmmc3_dmamask, > > + .coherent_dma_mask = 0xffffffffUL, > > + .platform_data = &s3c_hsmmc3_def_platdata, > > + }, > > +}; > > + > > +void s3c_sdhci3_set_platdata(struct s3c_sdhci_platdata *pd) > > +{ > > + struct s3c_sdhci_platdata *set = &s3c_hsmmc3_def_platdata; > > + > > + set->max_width = pd->max_width; > > + > > + if (pd->cfg_gpio) > > + set->cfg_gpio = pd->cfg_gpio; > > + if (pd->cfg_card) > > + set->cfg_card = pd->cfg_card; > > +} > > diff --git a/arch/arm/plat-samsung/include/plat/devs.h b/arch/arm/plat- > samsung/include/plat/devs.h > > index e6144e4..7842acd 100644 > > --- a/arch/arm/plat-samsung/include/plat/devs.h > > +++ b/arch/arm/plat-samsung/include/plat/devs.h > > @@ -54,6 +54,7 @@ extern struct platform_device s3c_device_hwmon; > > extern struct platform_device s3c_device_hsmmc0; > > extern struct platform_device s3c_device_hsmmc1; > > extern struct platform_device s3c_device_hsmmc2; > > +extern struct platform_device s3c_device_hsmmc3; > > > > extern struct platform_device s3c_device_spi0; > > extern struct platform_device s3c_device_spi1; > > diff --git a/arch/arm/plat-samsung/include/plat/sdhci.h b/arch/arm/plat- > samsung/include/plat/sdhci.h > > index 98ebd50..1314ffa 100644 > > --- a/arch/arm/plat-samsung/include/plat/sdhci.h > > +++ b/arch/arm/plat-samsung/include/plat/sdhci.h > > @@ -58,6 +58,7 @@ struct s3c_sdhci_platdata { > > extern void s3c_sdhci0_set_platdata(struct s3c_sdhci_platdata *pd); > > extern void s3c_sdhci1_set_platdata(struct s3c_sdhci_platdata *pd); > > extern void s3c_sdhci2_set_platdata(struct s3c_sdhci_platdata *pd); > > +extern void s3c_sdhci3_set_platdata(struct s3c_sdhci_platdata *pd); > > > > /* Default platform data, exported so that per-cpu initialisation can > > * set the correct one when there are more than one cpu type selected. > > @@ -66,6 +67,7 @@ extern void s3c_sdhci2_set_platdata(struct > s3c_sdhci_platdata *pd); > > extern struct s3c_sdhci_platdata s3c_hsmmc0_def_platdata; > > extern struct s3c_sdhci_platdata s3c_hsmmc1_def_platdata; > > extern struct s3c_sdhci_platdata s3c_hsmmc2_def_platdata; > > +extern struct s3c_sdhci_platdata s3c_hsmmc3_def_platdata; > > > > /* Helper function availablity */ > > > > @@ -78,6 +80,7 @@ extern void s3c64xx_setup_sdhci2_cfg_gpio(struct > platform_device *, int w); > > extern void s5pv210_setup_sdhci0_cfg_gpio(struct platform_device *, int w); > > extern void s5pv210_setup_sdhci1_cfg_gpio(struct platform_device *, int w); > > extern void s5pv210_setup_sdhci2_cfg_gpio(struct platform_device *, int w); > > +extern void s5pv210_setup_sdhci3_cfg_gpio(struct platform_device *, int w); > > Shouldn't this be in PATCH 2/2? > You're right, but I was thinking this is better to handle this. ...will move this into second. > > > > /* S3C6400 SDHCI setup */ > > > > @@ -264,10 +267,22 @@ static inline void s5pv210_default_sdhci2(void) > > static inline void s5pv210_default_sdhci2(void) { } > > #endif /* CONFIG_S3C_DEV_HSMMC2 */ > > > > +#ifdef CONFIG_S3C_DEV_HSMMC3 > > +static inline void s5pv210_default_sdhci3(void) > > +{ > > + s3c_hsmmc3_def_platdata.clocks = s5pv210_hsmmc_clksrcs; > > + s3c_hsmmc3_def_platdata.cfg_gpio = s5pv210_setup_sdhci3_cfg_gpio; > > + s3c_hsmmc3_def_platdata.cfg_card = s5pv210_setup_sdhci_cfg_card; > > +} > > +#else > > +static inline void s5pv210_default_sdhci3(void) { } > > +#endif /* CONFIG_S3C_DEV_HSMMC3 */ > > This could be simplified by putting the #ifdef inside the function. Yeah, you're right..but used same style with others in this file. ...so will modify it as your comment with others soon. > Also, same comment as above. > OK. > > + > > #else > > static inline void s5pv210_default_sdhci0(void) { } > > static inline void s5pv210_default_sdhci1(void) { } > > static inline void s5pv210_default_sdhci2(void) { } > > +static inline void s5pv210_default_sdhci3(void) { } > > #endif /* CONFIG_S5PC100_SETUP_SDHCI */ > > > > > > > -- Thanks. Best regards, Kgene. -- Kukjin Kim <kgene.kim@samsung.com>, Senior Engineer, SW Solution Development Team, Samsung Electronics Co., Ltd. ^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH v2 1/2] ARM: SAMSUNG: Add device definition for HSMMC3 2010-07-03 1:21 ` Kukjin Kim @ 2010-07-04 9:22 ` Maurus Cuelenaere -1 siblings, 0 replies; 12+ messages in thread From: Maurus Cuelenaere @ 2010-07-04 9:22 UTC (permalink / raw) To: Kukjin Kim Cc: linux-arm-kernel, linux-samsung-soc, ben-linux, 'Hyuk Lee' Op 03-07-10 03:21, Kukjin Kim schreef: > Maurus Cuelenaere wrote: >> Op 03-07-10 02:07, Kukjin Kim schreef: >> >>> /* S3C6400 SDHCI setup */ >>> >>> @@ -264,10 +267,22 @@ static inline void s5pv210_default_sdhci2(void) >>> static inline void s5pv210_default_sdhci2(void) { } >>> #endif /* CONFIG_S3C_DEV_HSMMC2 */ >>> >>> +#ifdef CONFIG_S3C_DEV_HSMMC3 >>> +static inline void s5pv210_default_sdhci3(void) >>> +{ >>> + s3c_hsmmc3_def_platdata.clocks = s5pv210_hsmmc_clksrcs; >>> + s3c_hsmmc3_def_platdata.cfg_gpio = s5pv210_setup_sdhci3_cfg_gpio; >>> + s3c_hsmmc3_def_platdata.cfg_card = s5pv210_setup_sdhci_cfg_card; >>> +} >>> +#else >>> +static inline void s5pv210_default_sdhci3(void) { } >>> +#endif /* CONFIG_S3C_DEV_HSMMC3 */ >> This could be simplified by putting the #ifdef inside the function. > Yeah, you're right..but used same style with others in this file. > ...so will modify it as your comment with others soon. Hmm yes, I guess it's just a matter of personal taste. -- Maurus Cuelenaere ^ permalink raw reply [flat|nested] 12+ messages in thread
* [PATCH v2 1/2] ARM: SAMSUNG: Add device definition for HSMMC3 @ 2010-07-04 9:22 ` Maurus Cuelenaere 0 siblings, 0 replies; 12+ messages in thread From: Maurus Cuelenaere @ 2010-07-04 9:22 UTC (permalink / raw) To: linux-arm-kernel Op 03-07-10 03:21, Kukjin Kim schreef: > Maurus Cuelenaere wrote: >> Op 03-07-10 02:07, Kukjin Kim schreef: >> >>> /* S3C6400 SDHCI setup */ >>> >>> @@ -264,10 +267,22 @@ static inline void s5pv210_default_sdhci2(void) >>> static inline void s5pv210_default_sdhci2(void) { } >>> #endif /* CONFIG_S3C_DEV_HSMMC2 */ >>> >>> +#ifdef CONFIG_S3C_DEV_HSMMC3 >>> +static inline void s5pv210_default_sdhci3(void) >>> +{ >>> + s3c_hsmmc3_def_platdata.clocks = s5pv210_hsmmc_clksrcs; >>> + s3c_hsmmc3_def_platdata.cfg_gpio = s5pv210_setup_sdhci3_cfg_gpio; >>> + s3c_hsmmc3_def_platdata.cfg_card = s5pv210_setup_sdhci_cfg_card; >>> +} >>> +#else >>> +static inline void s5pv210_default_sdhci3(void) { } >>> +#endif /* CONFIG_S3C_DEV_HSMMC3 */ >> This could be simplified by putting the #ifdef inside the function. > Yeah, you're right..but used same style with others in this file. > ...so will modify it as your comment with others soon. Hmm yes, I guess it's just a matter of personal taste. -- Maurus Cuelenaere ^ permalink raw reply [flat|nested] 12+ messages in thread
* [PATCH v2 2/2] ARM: S5PV210: Add support HSMMC on SMDKV210 2010-07-03 0:07 ` Kukjin Kim @ 2010-07-03 0:07 ` Kukjin Kim -1 siblings, 0 replies; 12+ messages in thread From: Kukjin Kim @ 2010-07-03 0:07 UTC (permalink / raw) To: linux-arm-kernel, linux-samsung-soc; +Cc: ben-linux, Hyuk Lee, Kukjin Kim From: Hyuk Lee <hyuk1.lee@samsung.com> This patch adds support HSMMC on SMDKV210, and gpio configuration for S5PV210 hsmmc3. Signed-off-by: Hyuk Lee <hyuk1.lee@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> --- Changes since previous patch: - Fixed wrong pin name - Adding missed call s5pv210_default_sdhci3() in s5pv210_map_io() arch/arm/mach-s5pv210/Kconfig | 5 +++++ arch/arm/mach-s5pv210/cpu.c | 1 + arch/arm/mach-s5pv210/include/mach/map.h | 1 + arch/arm/mach-s5pv210/mach-smdkv210.c | 4 ++++ arch/arm/mach-s5pv210/setup-sdhci-gpio.c | 20 ++++++++++++++++++++ 5 files changed, 31 insertions(+), 0 deletions(-) diff --git a/arch/arm/mach-s5pv210/Kconfig b/arch/arm/mach-s5pv210/Kconfig index 0761eac..6aee967 100644 --- a/arch/arm/mach-s5pv210/Kconfig +++ b/arch/arm/mach-s5pv210/Kconfig @@ -72,9 +72,14 @@ config MACH_SMDKV210 select CPU_S5PV210 select ARCH_SPARSEMEM_ENABLE select SAMSUNG_DEV_ADC + select S3C_DEV_HSMMC + select S3C_DEV_HSMMC1 + select S3C_DEV_HSMMC2 + select S3C_DEV_HSMMC3 select SAMSUNG_DEV_TS select S3C_DEV_WDT select HAVE_S3C2410_WATCHDOG + select S5PV210_SETUP_SDHCI help Machine support for Samsung SMDKV210 diff --git a/arch/arm/mach-s5pv210/cpu.c b/arch/arm/mach-s5pv210/cpu.c index 411a4a9..765034e 100644 --- a/arch/arm/mach-s5pv210/cpu.c +++ b/arch/arm/mach-s5pv210/cpu.c @@ -86,6 +86,7 @@ void __init s5pv210_map_io(void) s5pv210_default_sdhci0(); s5pv210_default_sdhci1(); s5pv210_default_sdhci2(); + s5pv210_default_sdhci3(); /* the i2c devices are directly compatible with s3c2440 */ s3c_i2c0_setname("s3c2440-i2c"); diff --git a/arch/arm/mach-s5pv210/include/mach/map.h b/arch/arm/mach-s5pv210/include/mach/map.h index 34eb168..fa9d7c2 100644 --- a/arch/arm/mach-s5pv210/include/mach/map.h +++ b/arch/arm/mach-s5pv210/include/mach/map.h @@ -97,6 +97,7 @@ #define S3C_PA_HSMMC0 S5PV210_PA_HSMMC(0) #define S3C_PA_HSMMC1 S5PV210_PA_HSMMC(1) #define S3C_PA_HSMMC2 S5PV210_PA_HSMMC(2) +#define S3C_PA_HSMMC3 S5PV210_PA_HSMMC(3) #define S3C_PA_IIC S5PV210_PA_IIC0 #define S3C_PA_IIC1 S5PV210_PA_IIC1 #define S3C_PA_IIC2 S5PV210_PA_IIC2 diff --git a/arch/arm/mach-s5pv210/mach-smdkv210.c b/arch/arm/mach-s5pv210/mach-smdkv210.c index 0d46279..b08f376 100644 --- a/arch/arm/mach-s5pv210/mach-smdkv210.c +++ b/arch/arm/mach-s5pv210/mach-smdkv210.c @@ -77,6 +77,10 @@ static struct platform_device *smdkv210_devices[] __initdata = { &s5pv210_device_iis0, &s5pv210_device_ac97, &s3c_device_adc, + &s3c_device_hsmmc0, + &s3c_device_hsmmc1, + &s3c_device_hsmmc2, + &s3c_device_hsmmc3, &s3c_device_ts, &s3c_device_wdt, }; diff --git a/arch/arm/mach-s5pv210/setup-sdhci-gpio.c b/arch/arm/mach-s5pv210/setup-sdhci-gpio.c index fe7d86d..143bfec 100644 --- a/arch/arm/mach-s5pv210/setup-sdhci-gpio.c +++ b/arch/arm/mach-s5pv210/setup-sdhci-gpio.c @@ -102,3 +102,23 @@ void s5pv210_setup_sdhci2_cfg_gpio(struct platform_device *dev, int width) s3c_gpio_setpull(S5PV210_GPG2(2), S3C_GPIO_PULL_UP); s3c_gpio_cfgpin(S5PV210_GPG2(2), S3C_GPIO_SFN(2)); } + +void s5pv210_setup_sdhci3_cfg_gpio(struct platform_device *dev, int width) +{ + unsigned int gpio; + + /* Set all the necessary GPG3[0:2] pins to special-function 2 */ + for (gpio = S5PV210_GPG3(0); gpio < S5PV210_GPG3(2); gpio++) { + s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2)); + s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE); + } + + /* Data pin GPG3[3:6] to special-function 2 */ + for (gpio = S5PV210_GPG3(3); gpio <= S5PV210_GPG3(6); gpio++) { + s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2)); + s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE); + } + + s3c_gpio_setpull(S5PV210_GPG3(2), S3C_GPIO_PULL_UP); + s3c_gpio_cfgpin(S5PV210_GPG3(2), S3C_GPIO_SFN(2)); +} -- 1.6.2.5 ^ permalink raw reply related [flat|nested] 12+ messages in thread
* [PATCH v2 2/2] ARM: S5PV210: Add support HSMMC on SMDKV210 @ 2010-07-03 0:07 ` Kukjin Kim 0 siblings, 0 replies; 12+ messages in thread From: Kukjin Kim @ 2010-07-03 0:07 UTC (permalink / raw) To: linux-arm-kernel From: Hyuk Lee <hyuk1.lee@samsung.com> This patch adds support HSMMC on SMDKV210, and gpio configuration for S5PV210 hsmmc3. Signed-off-by: Hyuk Lee <hyuk1.lee@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> --- Changes since previous patch: - Fixed wrong pin name - Adding missed call s5pv210_default_sdhci3() in s5pv210_map_io() arch/arm/mach-s5pv210/Kconfig | 5 +++++ arch/arm/mach-s5pv210/cpu.c | 1 + arch/arm/mach-s5pv210/include/mach/map.h | 1 + arch/arm/mach-s5pv210/mach-smdkv210.c | 4 ++++ arch/arm/mach-s5pv210/setup-sdhci-gpio.c | 20 ++++++++++++++++++++ 5 files changed, 31 insertions(+), 0 deletions(-) diff --git a/arch/arm/mach-s5pv210/Kconfig b/arch/arm/mach-s5pv210/Kconfig index 0761eac..6aee967 100644 --- a/arch/arm/mach-s5pv210/Kconfig +++ b/arch/arm/mach-s5pv210/Kconfig @@ -72,9 +72,14 @@ config MACH_SMDKV210 select CPU_S5PV210 select ARCH_SPARSEMEM_ENABLE select SAMSUNG_DEV_ADC + select S3C_DEV_HSMMC + select S3C_DEV_HSMMC1 + select S3C_DEV_HSMMC2 + select S3C_DEV_HSMMC3 select SAMSUNG_DEV_TS select S3C_DEV_WDT select HAVE_S3C2410_WATCHDOG + select S5PV210_SETUP_SDHCI help Machine support for Samsung SMDKV210 diff --git a/arch/arm/mach-s5pv210/cpu.c b/arch/arm/mach-s5pv210/cpu.c index 411a4a9..765034e 100644 --- a/arch/arm/mach-s5pv210/cpu.c +++ b/arch/arm/mach-s5pv210/cpu.c @@ -86,6 +86,7 @@ void __init s5pv210_map_io(void) s5pv210_default_sdhci0(); s5pv210_default_sdhci1(); s5pv210_default_sdhci2(); + s5pv210_default_sdhci3(); /* the i2c devices are directly compatible with s3c2440 */ s3c_i2c0_setname("s3c2440-i2c"); diff --git a/arch/arm/mach-s5pv210/include/mach/map.h b/arch/arm/mach-s5pv210/include/mach/map.h index 34eb168..fa9d7c2 100644 --- a/arch/arm/mach-s5pv210/include/mach/map.h +++ b/arch/arm/mach-s5pv210/include/mach/map.h @@ -97,6 +97,7 @@ #define S3C_PA_HSMMC0 S5PV210_PA_HSMMC(0) #define S3C_PA_HSMMC1 S5PV210_PA_HSMMC(1) #define S3C_PA_HSMMC2 S5PV210_PA_HSMMC(2) +#define S3C_PA_HSMMC3 S5PV210_PA_HSMMC(3) #define S3C_PA_IIC S5PV210_PA_IIC0 #define S3C_PA_IIC1 S5PV210_PA_IIC1 #define S3C_PA_IIC2 S5PV210_PA_IIC2 diff --git a/arch/arm/mach-s5pv210/mach-smdkv210.c b/arch/arm/mach-s5pv210/mach-smdkv210.c index 0d46279..b08f376 100644 --- a/arch/arm/mach-s5pv210/mach-smdkv210.c +++ b/arch/arm/mach-s5pv210/mach-smdkv210.c @@ -77,6 +77,10 @@ static struct platform_device *smdkv210_devices[] __initdata = { &s5pv210_device_iis0, &s5pv210_device_ac97, &s3c_device_adc, + &s3c_device_hsmmc0, + &s3c_device_hsmmc1, + &s3c_device_hsmmc2, + &s3c_device_hsmmc3, &s3c_device_ts, &s3c_device_wdt, }; diff --git a/arch/arm/mach-s5pv210/setup-sdhci-gpio.c b/arch/arm/mach-s5pv210/setup-sdhci-gpio.c index fe7d86d..143bfec 100644 --- a/arch/arm/mach-s5pv210/setup-sdhci-gpio.c +++ b/arch/arm/mach-s5pv210/setup-sdhci-gpio.c @@ -102,3 +102,23 @@ void s5pv210_setup_sdhci2_cfg_gpio(struct platform_device *dev, int width) s3c_gpio_setpull(S5PV210_GPG2(2), S3C_GPIO_PULL_UP); s3c_gpio_cfgpin(S5PV210_GPG2(2), S3C_GPIO_SFN(2)); } + +void s5pv210_setup_sdhci3_cfg_gpio(struct platform_device *dev, int width) +{ + unsigned int gpio; + + /* Set all the necessary GPG3[0:2] pins to special-function 2 */ + for (gpio = S5PV210_GPG3(0); gpio < S5PV210_GPG3(2); gpio++) { + s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2)); + s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE); + } + + /* Data pin GPG3[3:6] to special-function 2 */ + for (gpio = S5PV210_GPG3(3); gpio <= S5PV210_GPG3(6); gpio++) { + s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2)); + s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE); + } + + s3c_gpio_setpull(S5PV210_GPG3(2), S3C_GPIO_PULL_UP); + s3c_gpio_cfgpin(S5PV210_GPG3(2), S3C_GPIO_SFN(2)); +} -- 1.6.2.5 ^ permalink raw reply related [flat|nested] 12+ messages in thread
end of thread, other threads:[~2010-07-04 9:23 UTC | newest] Thread overview: 12+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2010-07-03 0:07 [PATCH v2] Add support HSMMC on Samsung SMDKV210 Kukjin Kim 2010-07-03 0:07 ` Kukjin Kim 2010-07-03 0:07 ` [PATCH v2 1/2] ARM: SAMSUNG: Add device definition for HSMMC3 Kukjin Kim 2010-07-03 0:07 ` Kukjin Kim 2010-07-03 0:17 ` Maurus Cuelenaere 2010-07-03 0:17 ` Maurus Cuelenaere 2010-07-03 1:21 ` Kukjin Kim 2010-07-03 1:21 ` Kukjin Kim 2010-07-04 9:22 ` Maurus Cuelenaere 2010-07-04 9:22 ` Maurus Cuelenaere 2010-07-03 0:07 ` [PATCH v2 2/2] ARM: S5PV210: Add support HSMMC on SMDKV210 Kukjin Kim 2010-07-03 0:07 ` Kukjin Kim
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.