All of lore.kernel.org
 help / color / mirror / Atom feed
From: Yinghai Lu <yinghai@kernel.org>
To: Conny Seidel <conny.seidel@amd.com>
Cc: "Petkov, Borislav" <Borislav.Petkov@amd.com>,
	Ingo Molnar <mingo@elte.hu>, "H. Peter Anvin" <hpa@zytor.com>,
	Andrew Morton <akpm@linux-foundation.org>,
	LKML <linux-kernel@vger.kernel.org>
Subject: Re: unable to handle kernel paging request at 40000000 __alloc_memory_core_early+0x147/0x1d6
Date: Fri, 09 Jul 2010 18:03:42 -0700	[thread overview]
Message-ID: <4C37C6EE.9060104@kernel.org> (raw)
In-Reply-To: <20100710015142.3f94b9dd@marah.osrc.amd.com>

On 07/09/2010 04:51 PM, Conny Seidel wrote:
> On Fri, 9 Jul 2010 18:07:50 -0400
> Yinghai Lu <yinghai@kernel.org> wrote:
> 
>> On 07/09/2010 01:42 PM, Conny Seidel wrote:
>>> sparse_early_mem_map_alloc: sparsemem memory map backing failed some
>>> memory will not be available.
>>
>> please check
>>
> This still panics, see logfile for complete trace.
> 

this one should fix the problem.

Thanks

Yinghai

[PATCH -v3] x86,nobootmem: make alloc_bootmem_node fall back to other node when 32bit numa are used

Borislav Petkov <borislav.petkov@amd.com> reported his 32bit numa has problem:

[    0.000000] Reserving total of 4c00 pages for numa KVA remap
[    0.000000] kva_start_pfn ~ 32800 max_low_pfn ~ 375fe
[    0.000000] max_pfn = 238000
[    0.000000] 8202MB HIGHMEM available.
[    0.000000] 885MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 375fe000
[    0.000000]   low ram: 0 - 375fe000
[    0.000000] alloc (nid=8 100000 - 7ee00000) (1000000 - ffffffff) 1000 1000 => 34e7000
[    0.000000] alloc (nid=8 100000 - 7ee00000) (1000000 - ffffffff) 200 40 => 34c9d80
[    0.000000] alloc (nid=0 100000 - 7ee00000) (1000000 - ffffffffffffffff) 180 40 => 34e6140
[    0.000000] alloc (nid=1 80000000 - c7e60000) (1000000 - ffffffffffffffff) 240 40 => 80000000
[    0.000000] BUG: unable to handle kernel paging request at 40000000
[    0.000000] IP: [<c2c8cff1>] __alloc_memory_core_early+0x147/0x1d6
[    0.000000] *pdpt = 0000000000000000 *pde = f000ff53f000ff00 
...
[    0.000000] Call Trace:
[    0.000000]  [<c2c8b4f8>] ? __alloc_bootmem_node+0x216/0x22f
[    0.000000]  [<c2c90c9b>] ? sparse_early_usemaps_alloc_node+0x5a/0x10b
[    0.000000]  [<c2c9149e>] ? sparse_init+0x1dc/0x499
[    0.000000]  [<c2c79118>] ? paging_init+0x168/0x1df
[    0.000000]  [<c2c780ff>] ? native_pagetable_setup_start+0xef/0x1bb

looks like it allocate much high address for bootmem.

try to cut limit with get_max_mapped()

-v3: make alloc_bootmem_node could fallback to other node.
     just like old alloc_bootmem_node did

need this patch for 2.6.34 and 2.6.35

Reported-by: Borislav Petkov <borislav.petkov@amd.com>
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Cc: stable@kernel.org

---
 mm/bootmem.c    |   24 ++++++++++++++++++++----
 mm/page_alloc.c |    3 +++
 2 files changed, 23 insertions(+), 4 deletions(-)

Index: linux-2.6/mm/page_alloc.c
===================================================================
--- linux-2.6.orig/mm/page_alloc.c
+++ linux-2.6/mm/page_alloc.c
@@ -3634,6 +3634,9 @@ void * __init __alloc_memory_core_early(
 	int i;
 	void *ptr;
 
+	if (limit > get_max_mapped())
+		limit = get_max_mapped();
+
 	/* need to go over early_node_map to find out good range for node */
 	for_each_active_range_index_in_nid(i, nid) {
 		u64 addr;
Index: linux-2.6/mm/bootmem.c
===================================================================
--- linux-2.6.orig/mm/bootmem.c
+++ linux-2.6/mm/bootmem.c
@@ -833,15 +833,24 @@ static void * __init ___alloc_bootmem_no
 void * __init __alloc_bootmem_node(pg_data_t *pgdat, unsigned long size,
 				   unsigned long align, unsigned long goal)
 {
+	void *ptr;
+
 	if (WARN_ON_ONCE(slab_is_available()))
 		return kzalloc_node(size, GFP_NOWAIT, pgdat->node_id);
 
 #ifdef CONFIG_NO_BOOTMEM
-	return __alloc_memory_core_early(pgdat->node_id, size, align,
+	ptr = __alloc_memory_core_early(pgdat->node_id, size, align,
+					 goal, -1ULL);
+	if (ptr)
+		return ptr;
+
+	ptr = __alloc_memory_core_early(MAX_NUMNODES, size, align,
 					 goal, -1ULL);
 #else
-	return ___alloc_bootmem_node(pgdat->bdata, size, align, goal, 0);
+	ptr = ___alloc_bootmem_node(pgdat->bdata, size, align, goal, 0);
 #endif
+
+	return ptr;
 }
 
 void * __init __alloc_bootmem_node_high(pg_data_t *pgdat, unsigned long size,
@@ -977,14 +986,21 @@ void * __init __alloc_bootmem_low(unsign
 void * __init __alloc_bootmem_low_node(pg_data_t *pgdat, unsigned long size,
 				       unsigned long align, unsigned long goal)
 {
+	void *ptr;
+
 	if (WARN_ON_ONCE(slab_is_available()))
 		return kzalloc_node(size, GFP_NOWAIT, pgdat->node_id);
 
 #ifdef CONFIG_NO_BOOTMEM
-	return __alloc_memory_core_early(pgdat->node_id, size, align,
+	ptr = __alloc_memory_core_early(pgdat->node_id, size, align,
+				goal, ARCH_LOW_ADDRESS_LIMIT);
+	if (ptr)
+		return ptr;
+	ptr = __alloc_memory_core_early(MAX_NUMNODES, size, align,
 				goal, ARCH_LOW_ADDRESS_LIMIT);
 #else
-	return ___alloc_bootmem_node(pgdat->bdata, size, align,
+	ptr = ___alloc_bootmem_node(pgdat->bdata, size, align,
 				goal, ARCH_LOW_ADDRESS_LIMIT);
 #endif
+	return ptr;
 }

  reply	other threads:[~2010-07-10  1:07 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2010-07-09 14:54 BUG: unable to handle kernel paging request at 40000000 __alloc_memory_core_early+0x147/0x1d6 Borislav Petkov
2010-07-09 19:08 ` Yinghai Lu
2010-07-09 19:52   ` Conny Seidel
2010-07-09 20:18     ` Yinghai Lu
2010-07-09 20:42       ` Conny Seidel
2010-07-09 22:07         ` Yinghai Lu
2010-07-09 23:51           ` Conny Seidel
2010-07-10  1:03             ` Yinghai Lu [this message]
2010-07-10  8:14               ` Conny Seidel
2010-07-10 18:40             ` [PATCH -v3] x86,nobootmem: make alloc_bootmem_node fall back to other node when 32bit numa are used Yinghai Lu
2010-07-20 18:35             ` Yinghai Lu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4C37C6EE.9060104@kernel.org \
    --to=yinghai@kernel.org \
    --cc=Borislav.Petkov@amd.com \
    --cc=akpm@linux-foundation.org \
    --cc=conny.seidel@amd.com \
    --cc=hpa@zytor.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mingo@elte.hu \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.