From: Bob Feretich <bob.feretich@domain.hid>
To: Gilles Chanteperdrix <gilles.chanteperdrix@xenomai.org>,
xenomai@xenomai.org
Subject: Re: [Xenomai-help] Xenomai xeno-test hangs on 2.6.31 on BeagleBoard, same works on 2.6.33
Date: Wed, 28 Jul 2010 18:25:15 -0700 [thread overview]
Message-ID: <4C50D87B.2010008@domain.hid> (raw)
In-Reply-To: <4C4FDFD2.4010405@domain.hid>
[-- Attachment #1: Type: text/plain, Size: 7688 bytes --]
OK, --enable-arm-eabi fixed the latency program, but xeno-test still
hangs at generate_loads on 2.6.31 (below). xeno-test worked on 2.6.33
.
The Angstrom Distribution beagleboard ttyS2
Angstrom 2010.4-test-20100518 beagleboard ttyS2
beagleboard login: root
root@domain.hid:~# ls /proc
1 28 9 irq self
10 286 buddyinfo kallsyms slabinfo
11 29 bus kmsg softirqs
12 3 cmdline kpagecount stat
13 4 cpu kpageflags swaps
14 49 cpuinfo loadavg sys
15 5 crypto locks sysrq-trigger
16 6 devices meminfo sysvipc
17 662 diskstats misc timer_list
18 7 driver modules tty
19 790 execdomains mounts uptime
2 793 filesystems mtd version
20 795 fs net vmallocinfo
21 797 interrupts pagetypeinfo vmstat
211 798 iomem partitions xenomai
212 8 ioports sched_debug zoneinfo
27 800 ipipe scsi
root@domain.hid:~# /usr/xenomai/bin/latency
== Sampling period: 1000 us
== Test mode: periodic user-mode task
== All results in microseconds
warming up...
RTT| 00:00:01 (periodic user-mode task, 1000 us period, priority 99)
RTH|----lat min|----lat avg|----lat max|-overrun|---msw|---lat
best|--lat worst
RTD| 17.999| 18.846| 28.615| 0| 0| 17.999|
28.615
RTD| 12.538| 13.307| 27.923| 0| 0| 12.538|
28.615
RTD| 12.384| 13.307| 26.461| 0| 0| 12.384|
28.615
RTD| 12.461| 13.307| 21.538| 0| 0| 12.384|
28.615
RTD| 12.538| 14.384| 33.923| 0| 0| 12.384|
33.923
RTD| 12.461| 13.307| 24.230| 0| 0| 12.384|
33.923
RTD| 12.461| 13.307| 25.923| 0| 0| 12.384|
33.923
RTD| 12.538| 13.307| 22.769| 0| 0| 12.384|
33.923
RTD| 12.461| 13.307| 23.769| 0| 0| 12.384|
33.923
RTD| 12.461| 14.307| 26.769| 0| 0| 12.384|
33.923
RTD| 12.461| 13.307| 22.923| 0| 0| 12.384|
33.923
RTD| 12.461| 13.307| 21.384| 0| 0| 12.384|
33.923
RTD| 12.461| 13.307| 23.384| 0| 0| 12.384|
33.923
RTD| 12.461| 13.230| 22.153| 0| 0| 12.384|
33.923
RTD| 12.461| 14.307| 26.615| 0| 0| 12.384|
33.923
RTD| 12.538| 13.307| 22.538| 0| 0| 12.384|
33.923
RTD| 12.461| 13.307| 23.461| 0| 0| 12.384|
33.923
RTD| 12.461| 13.307| 21.923| 0| 0| 12.384|
33.923
RTD| 12.461| 13.307| 22.769| 0| 0| 12.384|
33.923
RTD| 12.461| 14.307| 26.923| 0| 0| 12.384|
33.923
RTD| 12.461| 13.307| 22.538| 0| 0| 12.384|
33.923
RTT| 00:00:22 (periodic user-mode task, 1000 us period, priority 99)
RTH|----lat min|----lat avg|----lat max|-overrun|---msw|---lat
best|--lat worst
RTD| 12.461| 13.230| 21.230| 0| 0| 12.384|
33.923
RTD| 12.538| 13.307| 21.076| 0| 0| 12.384|
33.923
RTD| 12.461| 13.307| 20.692| 0| 0| 12.384|
33.923
RTD| 12.538| 14.230| 27.538| 0| 0| 12.384|
33.923
RTD| 12.461| 13.230| 22.692| 0| 0| 12.384|
33.923
RTD| 12.461| 13.307| 20.846| 0| 0| 12.384|
33.923
RTD| 12.461| 13.230| 21.692| 0| 0| 12.384|
33.923
RTD| 12.384| 13.307| 21.384| 0| 0| 12.384|
33.923
RTD| 12.384| 14.230| 26.615| 0| 0| 12.384|
33.923
RTD| 12.538| 13.307| 22.461| 0| 0| 12.384|
33.923
\x03---|-----------|-----------|-----------|--------|------|-------------------------
RTS| 12.384| 13.615| 33.923| 0| 0|
00:00:32/00:00:32
root@domain.hid:~# /usr/xenomai/bin/xeno-test -s -h -T 20
xeno-test: started -s -h -T 20
withBusybox is 1
xeno-test: running tests
/usr/xenomai/bin/xeno-test: eval: line 1: -h: not found
Tue May 18 20:59:04 UTC 2010
running: /usr/xenomai/bin/xeno-config --verbose
xeno-config --verbose
--version="2.5.3"
--cc="arm-angstrom-linux-gnueabi-gcc -march=armv7-a
-mtune=cortex-a8 -mfpu=neon -mfloat-abi=softfp"
--arch="arm"
--prefix="/usr/xenomai"
--xeno-cflags="-I/usr/xenomai/include -D_GNU_SOURCE
-D_REENTRANT -Wall -pipe -D__XENO__"
--xeno-ldflags="-L/usr/xenomai/lib -lxenomai -lpthread "
--posix-cflags=""
--posix-ldflags="-Wl,@/usr/xenomai/lib/posix.wrappers
-L/usr/xenomai/lib -lpthread_rt -lxenomai -lpthread -lr
t "
--library-dir="/usr/xenomai/lib"
Tue May 18 20:59:04 UTC 2010
running: /usr/xenomai/bin/xeno-info
If some fields are empty or look unusual you may have an old version.
Compare to the current minimal requirements in Documentation/Changes.
BusyBox v1.13.2 (2010-05-18 15:45:51 PDT) multi-call binary
Linux beagleboard 2.6.31-omap1 #1 Sun Jul 25 16:58:55 PDT 2010 armv7l
unknown
module-init-tools 3.4
Modules Loaded omap2_mcspi
Tue May 18 20:59:04 UTC 2010
running: cat /proc/cpuinfo
Processor : ARMv7 Processor rev 3 (v7l)
BogoMIPS : 498.07
Features : swp half thumb fastmult vfp edsp neon vfpv3
CPU implementer : 0x41
CPU architecture: 7
CPU variant : 0x1
CPU part : 0xc08
CPU revision : 3
Hardware : OMAP3 Beagle Board
Revision : 0020
Serial : 0000000000000000
Tue May 18 20:59:04 UTC 2010
running: md5sum /proc/cpuinfo # cpuinfo fingerprint
6f0a1a5525e65155ee727ef0c3403ba9 /proc/cpuinfo
Tue May 18 20:59:04 UTC 2010
running: cat /proc/ipipe/Linux
+----- Handling ([A]ccepted, [G]rabbed, [W]ired, [D]iscarded)
|+---- Sticky
||+--- Locked
|||+-- Exclusive
||||+- Virtual
[IRQ] |||||
0: A....
1: A....
... IRQ counts, values are the same ...
401: A....
416: G...V
417: G...V
[Domain info]
id=0x00000000
priority=100
Tue May 18 20:59:04 UTC 2010
running: cat /proc/ipipe/Xenomai
+----- Handling ([A]ccepted, [G]rabbed, [W]ired, [D]iscarded)
|+---- Sticky
||+--- Locked
|||+-- Exclusive
||||+- Virtual
[IRQ] |||||
37: W..X.
418: W...V
[Domain info]
id=0x58454e4f
priority=topmost
Tue May 18 20:59:04 UTC 2010
running: cat /proc/ipipe/version
1.16-01
Tue May 18 20:59:05 UTC 2010
running: generate_loads 1
dd workload started, pids 905 stored in /var/lock/xeno-test.804.pids
Regards,
Bob Feretich
On 7/28/2010 12:44 AM, Gilles Chanteperdrix wrote:
> Bob Feretich wrote:
>> On 2.6.33.......... (2.6.31 gives the same result)
>> root@domain.hid:~# /usr/xenomai/bin/latency
>> Xenomai or CONFIG_XENO_OPT_PERVASIVE disabled.
>> (modprobe xeno_nucleus?)
>>
>> BUT, neither are disabled... And, xeno_nucleus is built-in to the kernel.
> Ok. If you are using an EABI toolchain, did you pass --enable-arm-eabi
> to the configure script?
>
>
[-- Attachment #2: Type: text/html, Size: 12246 bytes --]
next prev parent reply other threads:[~2010-07-29 1:25 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-07-28 0:26 [Xenomai-help] Xenomai xeno-test hangs on 2.6.31 on BeagleBoard, same works on 2.6.33 Bob Feretich
2010-07-28 0:34 ` Gilles Chanteperdrix
2010-07-28 1:57 ` Bob Feretich
2010-07-28 2:23 ` Bob Feretich
2010-07-28 7:44 ` Gilles Chanteperdrix
2010-07-29 1:25 ` Bob Feretich [this message]
2010-07-29 7:35 ` Gilles Chanteperdrix
2010-07-29 16:28 ` Bob Feretich
2010-07-29 16:38 ` Gilles Chanteperdrix
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4C50D87B.2010008@domain.hid \
--to=bob.feretich@domain.hid \
--cc=gilles.chanteperdrix@xenomai.org \
--cc=xenomai@xenomai.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.