acer aspire 8943g with alc670

acer aspire 8943g with alc670

[Miroslav Šulc]

 hello,

i'd like to help with making the above soundcard to fully work, but have
no clue what to do exactly. currently the soundcard works pretty weird,
though at least sound goes out :-)

i tried hda analyzer but did not find any documentation for it so have
no idea what to do exactly. also, when clicking AUD_IN nodes, i get this
error:

** (hda_analyzer.py:10063): WARNING **: column number is a boolean, but
will be interpreted as an integer; this is likely not what you intended
Traceback (most recent call last):
  File "/dev/shm/hda-analyzer/hda_analyzer.py", line 308, in
selection_changed_cb
    self.__refresh()
  File "/dev/shm/hda-analyzer/hda_analyzer.py", line 276, in __refresh
    self.load()
  File "/dev/shm/hda-analyzer/hda_analyzer.py", line 336, in load
    self.node_window.add(NodeGui(node=n))
  File "/dev/shm/hda-analyzer/hda_guilib.py", line 86, in __init__
    self.__build_node(node, doframe)
  File "/dev/shm/hda-analyzer/hda_guilib.py", line 682, in __build_node
    vbox.pack_start(self.__build_amps(node), False, False)
  File "/dev/shm/hda-analyzer/hda_guilib.py", line 365, in __build_amps
    node.in_amp and node.amp_vals_in or None)
  File "/dev/shm/hda-analyzer/hda_guilib.py", line 328, in build_caps
    if ctl.hdactl.amp_index_match(idx):
  File "/dev/shm/hda-analyzer/hda_proc.py", line 170, in amp_index_match
    count = (self.amp_chs & 1) + ((self.amp_chs >> 1) & 1)
TypeError: unsupported operand type(s) for &: 'NoneType' and 'int'


can anybody pls direct me to some documentation that could help me to
master hda analyzer and find the way to make the card work correctly?

miroslav

Re: acer aspire 8943g with alc670

[Raymond Yau]

2010/7/29 Miroslav Šulc <fordfrog@gmail.com>

>  hello,
>
> i'd like to help with making the above soundcard to fully work, but have
> no clue what to do exactly. currently the soundcard works pretty weird,
> though at least sound goes out :-)
>
> i tried hda analyzer but did not find any documentation for it so have
> no idea what to do exactly. also, when clicking AUD_IN nodes, i get this
> error:
>
> ** (hda_analyzer.py:10063): WARNING **: column number is a boolean, but
> will be interpreted as an integer; this is likely not what you intended
> Traceback (most recent call last):
>  File "/dev/shm/hda-analyzer/hda_analyzer.py", line 308, in
> selection_changed_cb
>    self.__refresh()
>  File "/dev/shm/hda-analyzer/hda_analyzer.py", line 276, in __refresh
>    self.load()
>  File "/dev/shm/hda-analyzer/hda_analyzer.py", line 336, in load
>    self.node_window.add(NodeGui(node=n))
>  File "/dev/shm/hda-analyzer/hda_guilib.py", line 86, in __init__
>    self.__build_node(node, doframe)
>  File "/dev/shm/hda-analyzer/hda_guilib.py", line 682, in __build_node
>    vbox.pack_start(self.__build_amps(node), False, False)
>  File "/dev/shm/hda-analyzer/hda_guilib.py", line 365, in __build_amps
>    node.in_amp and node.amp_vals_in or None)
>  File "/dev/shm/hda-analyzer/hda_guilib.py", line 328, in build_caps
>    if ctl.hdactl.amp_index_match(idx):
>  File "/dev/shm/hda-analyzer/hda_proc.py", line 170, in amp_index_match
>    count = (self.amp_chs & 1) + ((self.amp_chs >> 1) & 1)
> TypeError: unsupported operand type(s) for &: 'NoneType' and 'int'
>
>
> can anybody pls direct me to some documentation that could help me to
> master hda analyzer and find the way to make the card work correctly?
>
> miroslav
>


By using alc670 alsa-info.txt in the alsa bugtracker , the latest version
hda_analyzer don't has any error message when clicking AUD_IN node

Not sure your error is due to using  /proc instead of text file since I
don't have your codec

There are error messages when click the "graph" button to generate the
graph.

About the graph
the blue line - connected audio path
the grey line - unconncted audio path
the line turn red when you put the mouse cursor near any line ,


TypeError: 'int' object is not iterable
Traceback (most recent call last):
  File "/hda-analyzer/hda_graph.py", line 579, in expose
    route.expose(cr, event)
  File "/hda-analyzer/hda_graph.py", line 190, in expose
    inactive = self.src.node.is_conn_active(self.dst.node)
  File "/hda-analyzer/hda_codec.py", line 809, in is_conn_active
    vals = dst_node.amp_vals_in.get_val_db(idx)
  File "/hda-analyzer/hda_codec.py", line 377, in get_val_db
    for val in vals:
TypeError: 'int' object is not iterable
_______________________________________________
Alsa-devel mailing list
Alsa-devel@alsa-project.org
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel

Re: acer aspire 8943g with alc670

[Miroslav Šulc]

 Dne 29.7.2010 15:20, Raymond Yau napsal(a):
> 2010/7/29 Miroslav Šulc <fordfrog@gmail.com>
>>  hello,
>>
>> i'd like to help with making the above soundcard to fully work, but have
>> no clue what to do exactly. currently the soundcard works pretty weird,
>> though at least sound goes out :-)
>>
>> i tried hda analyzer but did not find any documentation for it so have
>> no idea what to do exactly. also, when clicking AUD_IN nodes, i get this
>> error:
>>
>> ** (hda_analyzer.py:10063): WARNING **: column number is a boolean, but
>> will be interpreted as an integer; this is likely not what you intended
>> Traceback (most recent call last):
>>  File "/dev/shm/hda-analyzer/hda_analyzer.py", line 308, in
>> selection_changed_cb
>>    self.__refresh()
>>  File "/dev/shm/hda-analyzer/hda_analyzer.py", line 276, in __refresh
>>    self.load()
>>  File "/dev/shm/hda-analyzer/hda_analyzer.py", line 336, in load
>>    self.node_window.add(NodeGui(node=n))
>>  File "/dev/shm/hda-analyzer/hda_guilib.py", line 86, in __init__
>>    self.__build_node(node, doframe)
>>  File "/dev/shm/hda-analyzer/hda_guilib.py", line 682, in __build_node
>>    vbox.pack_start(self.__build_amps(node), False, False)
>>  File "/dev/shm/hda-analyzer/hda_guilib.py", line 365, in __build_amps
>>    node.in_amp and node.amp_vals_in or None)
>>  File "/dev/shm/hda-analyzer/hda_guilib.py", line 328, in build_caps
>>    if ctl.hdactl.amp_index_match(idx):
>>  File "/dev/shm/hda-analyzer/hda_proc.py", line 170, in amp_index_match
>>    count = (self.amp_chs & 1) + ((self.amp_chs >> 1) & 1)
>> TypeError: unsupported operand type(s) for &: 'NoneType' and 'int'
>>
>>
>> can anybody pls direct me to some documentation that could help me to
>> master hda analyzer and find the way to make the card work correctly?
>>
>> miroslav
>
> By using alc670 alsa-info.txt in the alsa bugtracker ,
ok, i will post one once i restart my pc as i played with the settings
of the driver so i guess the output might be affected.
> the latest version
> hda_analyzer don't has any error message when clicking AUD_IN node
well, in the night i downloaded the app from
http://www.alsa-project.org/hda-analyzer.py and have the issue. now also
tried alsa git repo and the result is the same, so the bug really is
there, at least for me. i can try to debug it in netbeans if i find out
how (i do not code in python nor do i use it as coder).
> Not sure your error is due to using  /proc instead of text file since I
> don't have your codec
i tried both, using proc and passing alsa-info.txt file to
hda-analyzer.py, both with the same result.
> There are error messages when click the "graph" button to generate the
> graph.
>
> About the graph
> the blue line - connected audio path
> the grey line - unconncted audio path
> the line turn red when you put the mouse cursor near any line ,
so hovering over gray connection makes the connection in the card
driver, and hovering over blue connection disables the connection?
> TypeError: 'int' object is not iterable
> Traceback (most recent call last):
>   File "/hda-analyzer/hda_graph.py", line 579, in expose
>     route.expose(cr, event)
>   File "/hda-analyzer/hda_graph.py", line 190, in expose
>     inactive = self.src.node.is_conn_active(self.dst.node)
>   File "/hda-analyzer/hda_codec.py", line 809, in is_conn_active
>     vals = dst_node.amp_vals_in.get_val_db(idx)
>   File "/hda-analyzer/hda_codec.py", line 377, in get_val_db
>     for val in vals:
> TypeError: 'int' object is not iterable
yes, this one i get in the graph too.
> _______________________________________________
> Alsa-devel mailing list
> Alsa-devel@alsa-project.org
> http://mailman.alsa-project.org/mailman/listinfo/alsa-devel

_______________________________________________
Alsa-devel mailing list
Alsa-devel@alsa-project.org
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel

Re: acer aspire 8943g with alc670

[Raymond Yau]

2010/7/29 Miroslav Šulc <fordfrog@gmail.com>

> .
> >
> > About the graph
> > the blue line - connected audio path
> > the grey line - unconncted audio path
> > the line turn red when you put the mouse cursor near any line ,
> so hovering over gray connection makes the connection in the card
> driver, and hovering over blue connection disables the connection?
>

No, I guess you have to clicked the buttons in the nodes

the graph show just the connected audio path, and it allow you to know which
widgets will be connected when you put your mouse over the line

how did you get  the hda_analyzer ?

using the previous version of run.py did not download all the programs
_______________________________________________
Alsa-devel mailing list
Alsa-devel@alsa-project.org
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel

Re: acer aspire 8943g with alc670

[Miroslav Šulc]

 Dne 29.7.2010 15:54, Raymond Yau napsal(a):
> 2010/7/29 Miroslav Šulc <fordfrog@gmail.com>
>> .
>>> About the graph
>>> the blue line - connected audio path
>>> the grey line - unconncted audio path
>>> the line turn red when you put the mouse cursor near any line ,
>> so hovering over gray connection makes the connection in the card
>> driver, and hovering over blue connection disables the connection?
> No, I guess you have to clicked the buttons in the nodes
>
> the graph show just the connected audio path, and it allow you to know which
> widgets will be connected when you put your mouse over the line
hm, seems i have no idea how to use hda analyzer then :-) anyway, will
first file bug this evening and then will see.
> how did you get  the hda_analyzer ?
http://www.alsa-project.org/main/index.php/HDA_Analyzer

and also:
git clone git://git.alsa-project.org/alsa.git alsa
cd alsa/hda_analyzer
python hda_analyzer.py
> using the previous version of run.py did not download all the programs
> _______________________________________________
> Alsa-devel mailing list
> Alsa-devel@alsa-project.org
> http://mailman.alsa-project.org/mailman/listinfo/alsa-devel

_______________________________________________
Alsa-devel mailing list
Alsa-devel@alsa-project.org
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel

Re: acer aspire 8943g with alc670

[Jaroslav Kysela]

[-- Attachment #1: Type: TEXT/PLAIN, Size: 3504 bytes --]

On Thu, 29 Jul 2010, Miroslav Šulc wrote:

> Dne 29.7.2010 15:20, Raymond Yau napsal(a):
>> 2010/7/29 Miroslav Šulc <fordfrog@gmail.com>
>>>  hello,
>>>
>>> i'd like to help with making the above soundcard to fully work, but have
>>> no clue what to do exactly. currently the soundcard works pretty weird,
>>> though at least sound goes out :-)
>>>
>>> i tried hda analyzer but did not find any documentation for it so have
>>> no idea what to do exactly. also, when clicking AUD_IN nodes, i get this
>>> error:
>>>
>>> ** (hda_analyzer.py:10063): WARNING **: column number is a boolean, but
>>> will be interpreted as an integer; this is likely not what you intended
>>> Traceback (most recent call last):
>>>  File "/dev/shm/hda-analyzer/hda_analyzer.py", line 308, in
>>> selection_changed_cb
>>>    self.__refresh()
>>>  File "/dev/shm/hda-analyzer/hda_analyzer.py", line 276, in __refresh
>>>    self.load()
>>>  File "/dev/shm/hda-analyzer/hda_analyzer.py", line 336, in load
>>>    self.node_window.add(NodeGui(node=n))
>>>  File "/dev/shm/hda-analyzer/hda_guilib.py", line 86, in __init__
>>>    self.__build_node(node, doframe)
>>>  File "/dev/shm/hda-analyzer/hda_guilib.py", line 682, in __build_node
>>>    vbox.pack_start(self.__build_amps(node), False, False)
>>>  File "/dev/shm/hda-analyzer/hda_guilib.py", line 365, in __build_amps
>>>    node.in_amp and node.amp_vals_in or None)
>>>  File "/dev/shm/hda-analyzer/hda_guilib.py", line 328, in build_caps
>>>    if ctl.hdactl.amp_index_match(idx):
>>>  File "/dev/shm/hda-analyzer/hda_proc.py", line 170, in amp_index_match
>>>    count = (self.amp_chs & 1) + ((self.amp_chs >> 1) & 1)
>>> TypeError: unsupported operand type(s) for &: 'NoneType' and 'int'

I fixed this issue in the alsa.git repo now.

>>> can anybody pls direct me to some documentation that could help me to
>>> master hda analyzer and find the way to make the card work correctly?
>>>
>>> miroslav
>>
>> By using alc670 alsa-info.txt in the alsa bugtracker ,
> ok, i will post one once i restart my pc as i played with the settings
> of the driver so i guess the output might be affected.
>> the latest version
>> hda_analyzer don't has any error message when clicking AUD_IN node
> well, in the night i downloaded the app from
> http://www.alsa-project.org/hda-analyzer.py and have the issue. now also
> tried alsa git repo and the result is the same, so the bug really is
> there, at least for me. i can try to debug it in netbeans if i find out
> how (i do not code in python nor do i use it as coder).
>> Not sure your error is due to using  /proc instead of text file since I
>> don't have your codec
> i tried both, using proc and passing alsa-info.txt file to
> hda-analyzer.py, both with the same result.

Put alsa-info.txt somewhere to download or point me to this file in a 
bugreport.

>> There are error messages when click the "graph" button to generate the
>> graph.
>>
>> About the graph
>> the blue line - connected audio path
>> the grey line - unconncted audio path
>> the line turn red when you put the mouse cursor near any line ,
> so hovering over gray connection makes the connection in the card
> driver, and hovering over blue connection disables the connection?

No, you need to edit the node (use open in context menu - right click on 
node).

 						Jaroslav

-----
Jaroslav Kysela <perex@perex.cz>
Linux Kernel Sound Maintainer
ALSA Project, Red Hat, Inc.

[-- Attachment #2: Type: text/plain, Size: 160 bytes --]

_______________________________________________
Alsa-devel mailing list
Alsa-devel@alsa-project.org
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel

Re: acer aspire 8943g with alc670

[Miroslav Šulc]

 Dne 29.7.2010 17:10, Jaroslav Kysela napsal(a):
> On Thu, 29 Jul 2010, Miroslav Šulc wrote:
>
>> Dne 29.7.2010 15:20, Raymond Yau napsal(a):
>>> 2010/7/29 Miroslav Šulc <fordfrog@gmail.com>
>>>>  hello,
>>>>
>>>> i'd like to help with making the above soundcard to fully work, but
>>>> have
>>>> no clue what to do exactly. currently the soundcard works pretty
>>>> weird,
>>>> though at least sound goes out :-)
>>>>
>>>> i tried hda analyzer but did not find any documentation for it so have
>>>> no idea what to do exactly. also, when clicking AUD_IN nodes, i get
>>>> this
>>>> error:
>>>>
>>>> ** (hda_analyzer.py:10063): WARNING **: column number is a boolean,
>>>> but
>>>> will be interpreted as an integer; this is likely not what you
>>>> intended
>>>> Traceback (most recent call last):
>>>>  File "/dev/shm/hda-analyzer/hda_analyzer.py", line 308, in
>>>> selection_changed_cb
>>>>    self.__refresh()
>>>>  File "/dev/shm/hda-analyzer/hda_analyzer.py", line 276, in __refresh
>>>>    self.load()
>>>>  File "/dev/shm/hda-analyzer/hda_analyzer.py", line 336, in load
>>>>    self.node_window.add(NodeGui(node=n))
>>>>  File "/dev/shm/hda-analyzer/hda_guilib.py", line 86, in __init__
>>>>    self.__build_node(node, doframe)
>>>>  File "/dev/shm/hda-analyzer/hda_guilib.py", line 682, in __build_node
>>>>    vbox.pack_start(self.__build_amps(node), False, False)
>>>>  File "/dev/shm/hda-analyzer/hda_guilib.py", line 365, in __build_amps
>>>>    node.in_amp and node.amp_vals_in or None)
>>>>  File "/dev/shm/hda-analyzer/hda_guilib.py", line 328, in build_caps
>>>>    if ctl.hdactl.amp_index_match(idx):
>>>>  File "/dev/shm/hda-analyzer/hda_proc.py", line 170, in
>>>> amp_index_match
>>>>    count = (self.amp_chs & 1) + ((self.amp_chs >> 1) & 1)
>>>> TypeError: unsupported operand type(s) for &: 'NoneType' and 'int'
>
> I fixed this issue in the alsa.git repo now.
y, i can confirm the bug is gone, thx :-)
>>>> can anybody pls direct me to some documentation that could help me to
>>>> master hda analyzer and find the way to make the card work correctly?
>>>>
>>>> miroslav
>>>
>>> By using alc670 alsa-info.txt in the alsa bugtracker ,
>> ok, i will post one once i restart my pc as i played with the settings
>> of the driver so i guess the output might be affected.
>>> the latest version
>>> hda_analyzer don't has any error message when clicking AUD_IN node
>> well, in the night i downloaded the app from
>> http://www.alsa-project.org/hda-analyzer.py and have the issue. now also
>> tried alsa git repo and the result is the same, so the bug really is
>> there, at least for me. i can try to debug it in netbeans if i find out
>> how (i do not code in python nor do i use it as coder).
>>> Not sure your error is due to using  /proc instead of text file since I
>>> don't have your codec
>> i tried both, using proc and passing alsa-info.txt file to
>> hda-analyzer.py, both with the same result.
>
> Put alsa-info.txt somewhere to download or point me to this file in a
> bugreport.
http://www.alsa-project.org/db/?f=d1c9aaa11903b6b1e2fd87b6d0466157ffdcb6ad
>>> There are error messages when click the "graph" button to generate the
>>> graph.
>>>
>>> About the graph
>>> the blue line - connected audio path
>>> the grey line - unconncted audio path
>>> the line turn red when you put the mouse cursor near any line ,
>> so hovering over gray connection makes the connection in the card
>> driver, and hovering over blue connection disables the connection?
>
> No, you need to edit the node (use open in context menu - right click
> on node).
found that, thx :-)
>
>                         Jaroslav
>
> -----
> Jaroslav Kysela <perex@perex.cz>
> Linux Kernel Sound Maintainer
> ALSA Project, Red Hat, Inc.

_______________________________________________
Alsa-devel mailing list
Alsa-devel@alsa-project.org
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel

Re: acer aspire 8943g with alc670

[Miroslav Šulc]

 Dne 29.7.2010 15:20, Raymond Yau napsal(a):
> 2010/7/29 Miroslav Šulc <fordfrog@gmail.com>
>>  hello,
>>
>> i'd like to help with making the above soundcard to fully work, but have
>> no clue what to do exactly. currently the soundcard works pretty weird,
>> though at least sound goes out :-)
>>
>> i tried hda analyzer but did not find any documentation for it so have
>> no idea what to do exactly. also, when clicking AUD_IN nodes, i get this
>> error:
>>
>> ** (hda_analyzer.py:10063): WARNING **: column number is a boolean, but
>> will be interpreted as an integer; this is likely not what you intended
>> Traceback (most recent call last):
>>  File "/dev/shm/hda-analyzer/hda_analyzer.py", line 308, in
>> selection_changed_cb
>>    self.__refresh()
>>  File "/dev/shm/hda-analyzer/hda_analyzer.py", line 276, in __refresh
>>    self.load()
>>  File "/dev/shm/hda-analyzer/hda_analyzer.py", line 336, in load
>>    self.node_window.add(NodeGui(node=n))
>>  File "/dev/shm/hda-analyzer/hda_guilib.py", line 86, in __init__
>>    self.__build_node(node, doframe)
>>  File "/dev/shm/hda-analyzer/hda_guilib.py", line 682, in __build_node
>>    vbox.pack_start(self.__build_amps(node), False, False)
>>  File "/dev/shm/hda-analyzer/hda_guilib.py", line 365, in __build_amps
>>    node.in_amp and node.amp_vals_in or None)
>>  File "/dev/shm/hda-analyzer/hda_guilib.py", line 328, in build_caps
>>    if ctl.hdactl.amp_index_match(idx):
>>  File "/dev/shm/hda-analyzer/hda_proc.py", line 170, in amp_index_match
>>    count = (self.amp_chs & 1) + ((self.amp_chs >> 1) & 1)
>> TypeError: unsupported operand type(s) for &: 'NoneType' and 'int'
>>
>>
>> can anybody pls direct me to some documentation that could help me to
>> master hda analyzer and find the way to make the card work correctly?
>>
>> miroslav
> By using alc670 alsa-info.txt in the alsa bugtracker
here is the bug and alsa-info.txt:
https://bugtrack.alsa-project.org/alsa-bug/view.php?id=5083
> the latest version
> hda_analyzer don't has any error message when clicking AUD_IN node
>
> Not sure your error is due to using  /proc instead of text file since I
> don't have your codec
>
> There are error messages when click the "graph" button to generate the
> graph.
>
> About the graph
> the blue line - connected audio path
> the grey line - unconncted audio path
> the line turn red when you put the mouse cursor near any line ,
>
>
> TypeError: 'int' object is not iterable
> Traceback (most recent call last):
>   File "/hda-analyzer/hda_graph.py", line 579, in expose
>     route.expose(cr, event)
>   File "/hda-analyzer/hda_graph.py", line 190, in expose
>     inactive = self.src.node.is_conn_active(self.dst.node)
>   File "/hda-analyzer/hda_codec.py", line 809, in is_conn_active
>     vals = dst_node.amp_vals_in.get_val_db(idx)
>   File "/hda-analyzer/hda_codec.py", line 377, in get_val_db
>     for val in vals:
> TypeError: 'int' object is not iterable
> _______________________________________________
> Alsa-devel mailing list
> Alsa-devel@alsa-project.org
> http://mailman.alsa-project.org/mailman/listinfo/alsa-devel

_______________________________________________
Alsa-devel mailing list
Alsa-devel@alsa-project.org
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel