Re: AR7240 VLAN setup

Re: AR7240 VLAN setup

[Ben Greear]

On 08/25/2010 02:13 AM, Wei Qiang wrote:
> *Hi, Ben,*
>
> * *
>
> * Sorry for bother.*
>
> * *
>
> * I have a question about how to setup 802.1Q VLAN on AR7240, and can’t get any answer for days. When I googled “802.1q ar7240”, I noticed that you were the
> supporter of 802.1q module. It seems that you are the only one who may help me resolve the problem now. Support from Atheros is poor.*

You might try the linux wireless mailing list:
"linux-wireless@vger.kernel.org" <linux-wireless@vger.kernel.org>

I have only messed with VLANs on wired interfaces.

Thanks,
Ben

>
> * *
>
> * The problem itself is quite straight forward: *
>
> * *
>
> *1. All packets to ingress LAN port should have a VLAN tag added, or the tag should be removed at egress LAN port.*
>
> * 2. WAN port will transmit all packets unmodified.*
>
> * *
>
> * If you may have an instruction of how to set AR7240 up, or have some related documents to me, that will be great.*
>
> * *
>
> * I have tried different combinations of those registers, but none of them works.*
>
> * *
>
> * This issue is very important for me, and your help is highly appreciated!*
>
> * *
>
> *Thanks and regards,*
>
> * *
>
> *Wei*
>


-- 
Ben Greear <greearb@candelatech.com>
Candela Technologies Inc  http://www.candelatech.com