From: matthieu castet <castet.matthieu@free.fr>
To: linux-kernel@vger.kernel.org,
linux-security-module@vger.kernel.org,
linux-next@vger.kernel.org
Cc: Arjan van de Ven <arjan@infradead.org>,
James Morris <jmorris@namei.org>,
Andrew Morton <akpm@linux-foundation.org>, Andi Kleen <ak@muc.de>,
Thomas Gleixner <tglx@linutronix.de>,
"H. Peter Anvin" <hpa@zytor.com>, Ingo Molnar <mingo@elte.hu>,
Rusty Russell <rusty@rustcorp.com.au>,
Stephen Rothwell <sfr@canb.auug.org.au>,
Dave Jones <davej@redhat.com>,
Siarhei Liakh <sliakh.lkml@gmail.com>
Subject: Re: [PATCH 2/3 V8] [tip:x86/mm] NX protection for kernel data
Date: Tue, 14 Sep 2010 19:51:18 +0200 [thread overview]
Message-ID: <4C8FB616.2070807@free.fr> (raw)
In-Reply-To: <4C856211.7080802@free.fr>
Hi,
any feedback on that ?
Thanks,
Matthieu
matthieu castet a écrit :
> Note: this patch depends on "Correct improper large page
> preservation" patch
> This patch expands functionality of CONFIG_DEBUG_RODATA to set main
> (static) kernel data area as NX.
> The following steps are taken to achieve this:
> 1. Linker script is adjusted so .text always starts and ends on a
> page bound
> 2. Linker script is adjusted so .rodata always start and
> end on a page boundary
> 3. NX is set for all pages from _etext through _end in mark_rodata_ro.
> 4. free_init_pages() sets released memory NX in arch/x86/mm/init.c
> 5. bios rom is set to x when pcibios is used.
> The results of patch application may be observed in the diff of
> kernel page
> table dumps.
> pcibios :
> --- data_nx_pt_before.txt 2009-10-13 07:48:59.000000000 -0400
> +++ data_nx_pt_after.txt 2009-10-13 07:26:46.000000000 -0400
> @@ -2,8 +2,9 @@
> 0x00000000-0xc0000000 3G pmd
> ---[ Kernel Mapping ]---
> -0xc0000000-0xc0100000 1M RW GLB x pte
> +0xc0000000-0xc00a0000 640K RW GLB NX pte
> +0xc00a0000-0xc0100000 384K RW GLB x pte
> -0xc0100000-0xc03d7000 2908K ro GLB x pte
> +0xc0100000-0xc0318000 2144K ro GLB x pte
> +0xc0318000-0xc03d7000 764K ro GLB NX pte
> -0xc03d7000-0xc0600000 2212K RW GLB x pte
> +0xc03d7000-0xc0600000 2212K RW GLB NX pte
> 0xc0600000-0xf7a00000 884M RW PSE GLB NX pmd
> 0xf7a00000-0xf7bfe000 2040K RW GLB NX pte
> 0xf7bfe000-0xf7c00000 8K pte
> no pcibios :
> --- data_nx_pt_before.txt 2009-10-13 07:48:59.000000000 -0400
> +++ data_nx_pt_after.txt 2009-10-13 07:26:46.000000000 -0400
> @@ -2,8 +2,9 @@
> 0x00000000-0xc0000000 3G pmd
> ---[ Kernel Mapping ]---
> -0xc0000000-0xc0100000 1M RW GLB x pte
> +0xc0000000-0xc0100000 1M RW GLB NX pte
> -0xc0100000-0xc03d7000 2908K ro GLB x pte
> +0xc0100000-0xc0318000 2144K ro GLB x pte
> +0xc0318000-0xc03d7000 764K ro GLB NX pte
> -0xc03d7000-0xc0600000 2212K RW GLB x pte
> +0xc03d7000-0xc0600000 2212K RW GLB NX pte
> 0xc0600000-0xf7a00000 884M RW PSE GLB NX pmd
> 0xf7a00000-0xf7bfe000 2040K RW GLB NX pte
> 0xf7bfe000-0xf7c00000 8K pte
> The patch have been developed for Linux 2.6.34-rc2 x86 by Siarhei
> Liakh
> <sliakh.lkml@gmail.com> and Xuxian Jiang <jiang@cs.ncsu.edu>.
> V1: initial patch for 2.6.30
> V2: patch for 2.6.31-rc7
> V3: moved all code into arch/x86, adjusted credits
> V4: fixed ifdef, removed credits from CREDITS
> V5: fixed an address calculation bug in mark_nxdata_nx()
> V6: added acked-by and PT dump diff to commit log
> V7: minor adjustments for -tip
> V8: rework with the merge of "Set first MB as RW+NX"
> Signed-off-by: Siarhei Liakh <sliakh.lkml@gmail.com>
> Signed-off-by: Xuxian Jiang <jiang@cs.ncsu.edu>
> Signed-off-by: Matthieu CASTET <castet.matthieu@free.fr>
>
--
To unsubscribe from this list: send the line "unsubscribe linux-security-module" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
WARNING: multiple messages have this Message-ID (diff)
From: matthieu castet <castet.matthieu@free.fr>
To: linux-kernel@vger.kernel.org,
linux-security-module@vger.kernel.org,
linux-next@vger.kernel.org
Cc: Arjan van de Ven <arjan@infradead.org>,
James Morris <jmorris@namei.org>,
Andrew Morton <akpm@linux-foundation.org>, Andi Kleen <ak@muc.de>,
Thomas Gleixner <tglx@linutronix.de>,
"H. Peter Anvin" <hpa@zytor.com>, Ingo Molnar <mingo@elte.hu>,
Rusty Russell <rusty@rustcorp.com.au>,
Stephen Rothwell <sfr@canb.auug.org.au>,
Dave Jones <davej@redhat.com>,
Siarhei Liakh <sliakh.lkml@gmail.com>
Subject: Re: [PATCH 2/3 V8] [tip:x86/mm] NX protection for kernel data
Date: Tue, 14 Sep 2010 19:51:18 +0200 [thread overview]
Message-ID: <4C8FB616.2070807@free.fr> (raw)
In-Reply-To: <4C856211.7080802@free.fr>
Hi,
any feedback on that ?
Thanks,
Matthieu
matthieu castet a écrit :
> Note: this patch depends on "Correct improper large page
> preservation" patch
> This patch expands functionality of CONFIG_DEBUG_RODATA to set main
> (static) kernel data area as NX.
> The following steps are taken to achieve this:
> 1. Linker script is adjusted so .text always starts and ends on a
> page bound
> 2. Linker script is adjusted so .rodata always start and
> end on a page boundary
> 3. NX is set for all pages from _etext through _end in mark_rodata_ro.
> 4. free_init_pages() sets released memory NX in arch/x86/mm/init.c
> 5. bios rom is set to x when pcibios is used.
> The results of patch application may be observed in the diff of
> kernel page
> table dumps.
> pcibios :
> --- data_nx_pt_before.txt 2009-10-13 07:48:59.000000000 -0400
> +++ data_nx_pt_after.txt 2009-10-13 07:26:46.000000000 -0400
> @@ -2,8 +2,9 @@
> 0x00000000-0xc0000000 3G pmd
> ---[ Kernel Mapping ]---
> -0xc0000000-0xc0100000 1M RW GLB x pte
> +0xc0000000-0xc00a0000 640K RW GLB NX pte
> +0xc00a0000-0xc0100000 384K RW GLB x pte
> -0xc0100000-0xc03d7000 2908K ro GLB x pte
> +0xc0100000-0xc0318000 2144K ro GLB x pte
> +0xc0318000-0xc03d7000 764K ro GLB NX pte
> -0xc03d7000-0xc0600000 2212K RW GLB x pte
> +0xc03d7000-0xc0600000 2212K RW GLB NX pte
> 0xc0600000-0xf7a00000 884M RW PSE GLB NX pmd
> 0xf7a00000-0xf7bfe000 2040K RW GLB NX pte
> 0xf7bfe000-0xf7c00000 8K pte
> no pcibios :
> --- data_nx_pt_before.txt 2009-10-13 07:48:59.000000000 -0400
> +++ data_nx_pt_after.txt 2009-10-13 07:26:46.000000000 -0400
> @@ -2,8 +2,9 @@
> 0x00000000-0xc0000000 3G pmd
> ---[ Kernel Mapping ]---
> -0xc0000000-0xc0100000 1M RW GLB x pte
> +0xc0000000-0xc0100000 1M RW GLB NX pte
> -0xc0100000-0xc03d7000 2908K ro GLB x pte
> +0xc0100000-0xc0318000 2144K ro GLB x pte
> +0xc0318000-0xc03d7000 764K ro GLB NX pte
> -0xc03d7000-0xc0600000 2212K RW GLB x pte
> +0xc03d7000-0xc0600000 2212K RW GLB NX pte
> 0xc0600000-0xf7a00000 884M RW PSE GLB NX pmd
> 0xf7a00000-0xf7bfe000 2040K RW GLB NX pte
> 0xf7bfe000-0xf7c00000 8K pte
> The patch have been developed for Linux 2.6.34-rc2 x86 by Siarhei
> Liakh
> <sliakh.lkml@gmail.com> and Xuxian Jiang <jiang@cs.ncsu.edu>.
> V1: initial patch for 2.6.30
> V2: patch for 2.6.31-rc7
> V3: moved all code into arch/x86, adjusted credits
> V4: fixed ifdef, removed credits from CREDITS
> V5: fixed an address calculation bug in mark_nxdata_nx()
> V6: added acked-by and PT dump diff to commit log
> V7: minor adjustments for -tip
> V8: rework with the merge of "Set first MB as RW+NX"
> Signed-off-by: Siarhei Liakh <sliakh.lkml@gmail.com>
> Signed-off-by: Xuxian Jiang <jiang@cs.ncsu.edu>
> Signed-off-by: Matthieu CASTET <castet.matthieu@free.fr>
>
next prev parent reply other threads:[~2010-09-14 17:51 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-09-06 21:50 [PATCH 2/3 V8] [tip:x86/mm] NX protection for kernel data matthieu castet
2010-09-14 17:51 ` matthieu castet [this message]
2010-09-14 17:51 ` matthieu castet
2010-09-21 19:00 ` Konrad Rzeszutek Wilk
2010-09-21 19:00 ` Konrad Rzeszutek Wilk
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4C8FB616.2070807@free.fr \
--to=castet.matthieu@free.fr \
--cc=ak@muc.de \
--cc=akpm@linux-foundation.org \
--cc=arjan@infradead.org \
--cc=davej@redhat.com \
--cc=hpa@zytor.com \
--cc=jmorris@namei.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-next@vger.kernel.org \
--cc=linux-security-module@vger.kernel.org \
--cc=mingo@elte.hu \
--cc=rusty@rustcorp.com.au \
--cc=sfr@canb.auug.org.au \
--cc=sliakh.lkml@gmail.com \
--cc=tglx@linutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.