[PATCH] sam9m10g45ek: use the right machine id

[PATCH] sam9m10g45ek: use the right machine id

[Jean-Christophe PLAGNIOL-VILLARD]

today the board use 2 machines id AT91SAM9G45EKES and AT91SAM9M10G45EK
now will use only AT91SAM9M10G45EK

the other boards revision will be specified via system_rev
as done for the 9g20ek

for 9g45ekes, m10g45ekes and m10g45ek boards and revisions

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: Patrice Vilchez <patrice.vilchez@atmel.com>
---
 arch/arm/mach-at91/Kconfig              |    4 ++--
 arch/arm/mach-at91/Makefile             |    2 +-
 arch/arm/mach-at91/board-sam9m10g45ek.c |    2 +-
 3 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index 879b515..200331c 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -384,8 +384,8 @@ if ARCH_AT91SAM9G45
 
 comment "AT91SAM9G45 Board Type"
 
-config MACH_AT91SAM9G45EKES
-	bool "Atmel AT91SAM9G45-EKES Evaluation Kit"
+config MACH_AT91SAM9M10G45EK
+	bool "Atmel AT91SAM9M10G45-EK Evaluation Kits"
 	select HAVE_NAND_ATMEL_BUSWIDTH_16
 	help
 	  Select this if you are using Atmel's AT91SAM9G45-EKES Evaluation Kit.
diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile
index e3711f6..ffd61ab 100644
--- a/arch/arm/mach-at91/Makefile
+++ b/arch/arm/mach-at91/Makefile
@@ -68,7 +68,7 @@ obj-$(CONFIG_MACH_PORTUXG20)	+= board-stamp9g20.o
 obj-$(CONFIG_MACH_SNAPPER_9260)	+= board-snapper9260.o
 
 # AT91SAM9G45 board-specific support
-obj-$(CONFIG_MACH_AT91SAM9G45EKES) += board-sam9m10g45ek.o
+obj-$(CONFIG_MACH_AT91SAM9M10G45EK) += board-sam9m10g45ek.o
 
 # AT91CAP9 board-specific support
 obj-$(CONFIG_MACH_AT91CAP9ADK)	+= board-cap9adk.o
diff --git a/arch/arm/mach-at91/board-sam9m10g45ek.c b/arch/arm/mach-at91/board-sam9m10g45ek.c
index ee80059..f9bf45e 100644
--- a/arch/arm/mach-at91/board-sam9m10g45ek.c
+++ b/arch/arm/mach-at91/board-sam9m10g45ek.c
@@ -399,7 +399,7 @@ static void __init ek_board_init(void)
 	at91_pwm_leds(ek_pwm_led, ARRAY_SIZE(ek_pwm_led));
 }
 
-MACHINE_START(AT91SAM9G45EKES, "Atmel AT91SAM9G45-EKES")
+MACHINE_START(AT91SAM9M10G45EK, "Atmel AT91SAM9M10G45-EK")
 	/* Maintainer: Atmel */
 	.phys_io	= AT91_BASE_SYS,
 	.io_pg_offst	= (AT91_VA_BASE_SYS >> 18) & 0xfffc,
-- 
1.7.1

[PATCH] sam9m10g45ek: use the right machine id

[Nicolas Ferre]

Le 22/09/2010 07:55, Jean-Christophe PLAGNIOL-VILLARD :
> today the board use 2 machines id AT91SAM9G45EKES and AT91SAM9M10G45EK
> now will use only AT91SAM9M10G45EK
> 
> the other boards revision will be specified via system_rev
> as done for the 9g20ek
> 
> for 9g45ekes, m10g45ekes and m10g45ek boards and revisions
> 
> Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
> Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
> Cc: Patrice Vilchez <patrice.vilchez@atmel.com>

Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>

> ---
>  arch/arm/mach-at91/Kconfig              |    4 ++--
>  arch/arm/mach-at91/Makefile             |    2 +-
>  arch/arm/mach-at91/board-sam9m10g45ek.c |    2 +-
>  3 files changed, 4 insertions(+), 4 deletions(-)
> 
> diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
> index 879b515..200331c 100644
> --- a/arch/arm/mach-at91/Kconfig
> +++ b/arch/arm/mach-at91/Kconfig
> @@ -384,8 +384,8 @@ if ARCH_AT91SAM9G45
>  
>  comment "AT91SAM9G45 Board Type"
>  
> -config MACH_AT91SAM9G45EKES
> -	bool "Atmel AT91SAM9G45-EKES Evaluation Kit"
> +config MACH_AT91SAM9M10G45EK
> +	bool "Atmel AT91SAM9M10G45-EK Evaluation Kits"
>  	select HAVE_NAND_ATMEL_BUSWIDTH_16
>  	help
>  	  Select this if you are using Atmel's AT91SAM9G45-EKES Evaluation Kit.
> diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile
> index e3711f6..ffd61ab 100644
> --- a/arch/arm/mach-at91/Makefile
> +++ b/arch/arm/mach-at91/Makefile
> @@ -68,7 +68,7 @@ obj-$(CONFIG_MACH_PORTUXG20)	+= board-stamp9g20.o
>  obj-$(CONFIG_MACH_SNAPPER_9260)	+= board-snapper9260.o
>  
>  # AT91SAM9G45 board-specific support
> -obj-$(CONFIG_MACH_AT91SAM9G45EKES) += board-sam9m10g45ek.o
> +obj-$(CONFIG_MACH_AT91SAM9M10G45EK) += board-sam9m10g45ek.o
>  
>  # AT91CAP9 board-specific support
>  obj-$(CONFIG_MACH_AT91CAP9ADK)	+= board-cap9adk.o
> diff --git a/arch/arm/mach-at91/board-sam9m10g45ek.c b/arch/arm/mach-at91/board-sam9m10g45ek.c
> index ee80059..f9bf45e 100644
> --- a/arch/arm/mach-at91/board-sam9m10g45ek.c
> +++ b/arch/arm/mach-at91/board-sam9m10g45ek.c
> @@ -399,7 +399,7 @@ static void __init ek_board_init(void)
>  	at91_pwm_leds(ek_pwm_led, ARRAY_SIZE(ek_pwm_led));
>  }
>  
> -MACHINE_START(AT91SAM9G45EKES, "Atmel AT91SAM9G45-EKES")
> +MACHINE_START(AT91SAM9M10G45EK, "Atmel AT91SAM9M10G45-EK")
>  	/* Maintainer: Atmel */
>  	.phys_io	= AT91_BASE_SYS,
>  	.io_pg_offst	= (AT91_VA_BASE_SYS >> 18) & 0xfffc,


-- 
Nicolas Ferre