From: Arjan Koers <arjan@xutrox.com>
To: kvm@vger.kernel.org
Cc: Zachary Amsden <zamsden@redhat.com>,
Marcelo Tosatti <mtosatti@redhat.com>,
Michael Tokarev <mjt@tls.msk.ru>, Avi Kivity <avi@redhat.com>,
Glauber Costa <glommer@redhat.com>,
Andre Przywara <andre.przywara@amd.com>
Subject: Re: 2.6.35-rc1 regression with pvclock and smp guests
Date: Sun, 10 Oct 2010 03:26:02 +0200 [thread overview]
Message-ID: <4CB1162A.5030802@xutrox.com> (raw)
In-Reply-To: <4CAFC11B.8010603@xutrox.com>
[-- Attachment #1: Type: text/plain, Size: 2485 bytes --]
On 2010-10-09 03:10, Arjan Koers wrote:
> On 2010-10-09 00:06, Marcelo Tosatti wrote:
>> On Thu, Oct 07, 2010 at 04:47:11PM -1000, Zachary Amsden wrote:
>>> On 10/07/2010 02:12 PM, Arjan Koers wrote:
>>>> On 2010-10-03 01:42, Zachary Amsden wrote:
>>>> ...
>>>>> Umm... do you guys have this commit? This is supposed to address the
>>>>> issue where the guest keeps resetting the TSC. A guest which does that
>>>>> will break kvmclock. It only happens on SMP, and it's much worse on AMD
>>>>> CPUs...
>>>>>
>>>>> sound like your scenario.
>>>>>
>>>>> commit bd59fc8ff95126f27b7a0df1b6cc602aa428812d
>>>>> Author: Zachary Amsden<zamsden@redhat.com>
>>>>> Date: Thu Aug 19 22:07:26 2010 -1000
>>>>
>>>> This commit fixes the problem:
>>>>
>>>> commit aad07c4f92bae2edaa42bcef84c2afdd0d082458
>>>> Author: Zachary Amsden<zamsden@redhat.com>
>>>> Date: Thu Aug 19 22:07:19 2010 -1000
>>>>
>>>> KVM: x86: Move TSC reset out of vmcb_init
>>>>
>>>> The VMCB is reset whenever we receive a startup IPI, so Linux is setting
>>>> TSC back to zero happens very late in the boot process and destabilizing
>>>> the TSC. Instead, just set TSC to zero once at VCPU creation time.
>>>>
>>>> Why the separate patch? So git-bisect is your friend.
>>>
>>> Okay, apparently I need to go poke around 2.6.35 and see what
>>> patches made it there and what patches didn't.
>>
>> Backports attached. Michael, Arjan, please give them a try.
>>
>
> Thanks for the patches.
>
> Successfully tested with 2.6.34.7, 2.6.35.7 and 2.6.36-rc7 host
> (with a 2.6.35.7 guest).
>
> It failed with a 2.6.32.24 host. The patch applied, but
> pvclock_clocksource_read on the guest is still producing wrong
> results for CPU 1 while it's booting. I'll re-check tomorrow.
I've performed some more tests on 2.6.32.24 and it turns out that
the wrong value for CPU 1 is not far enough into the future to make
the guest hang, but that may be different on someone else's system.
See the attached boot log 'dmesg-tsc-unstable.txt'. Note that the printk
time doesn't change for a while after switching to clocksource kvm-clock.
On 2.6.32 and 2.6.33, the TSC is unstable, while on 2.6.34+ it's not
(with Marcelo's patches applied). The attached host patches (backported
from 2.6.34) make them all behave like 2.6.34+, with stable TSC. See
boot log 'dmesg-tsc-stable.txt'.
If I'm not mistaken, the code in pvclock_clocksource_read that
causes the hangs will never be reached when the TSC is stable.
[-- Attachment #2: dmesg-tsc-unstable.txt --]
[-- Type: text/plain, Size: 15294 bytes --]
[ 0.000000] Linux version 2.6.32.24-201010092338-guestmp (arjan@dev-lenny) (gcc version 4.4.5 20100728 (prerelease) (Debian 4.4.4-8) ) #1 SMP Sat Oct 9 23:42:46 UTC 2010
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32.24-201010092338-guestmp root=UUID=22a4b388-70e0-4d2a-9aa1-bd842504378a ro quiet
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009bc00 (usable)
[ 0.000000] BIOS-e820: 000000000009bc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000001fffd000 (usable)
[ 0.000000] BIOS-e820: 000000001fffd000 - 0000000020000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: feffd00000000000 - ff00100000000000 (reserved)
[ 0.000000] DMI 2.4 present.
[ 0.000000] last_pfn = 0x1fffd max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: write-back
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 00E0000000 mask FFE0000000 uncachable
[ 0.000000] 1 disabled
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x0, new 0x7010600070106
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: 0000000000000000-000000001fffd000
[ 0.000000] 0000000000 - 001fe00000 page 2M
[ 0.000000] 001fe00000 - 001fffd000 page 4k
[ 0.000000] kernel direct mapping tables up to 1fffd000 @ 8000-b000
[ 0.000000] RAMDISK: 17df5000 - 1803d7b1
[ 0.000000] ACPI: RSDP 00000000000fdb80 00014 (v00 BOCHS )
[ 0.000000] ACPI: RSDT 000000001fffde10 00034 (v01 BOCHS BXPCRSDT 00000001 BXPC 00000001)
[ 0.000000] ACPI: FACP 000000001ffffe40 00074 (v01 BOCHS BXPCFACP 00000001 BXPC 00000001)
[ 0.000000] ACPI: DSDT 000000001fffdfd0 01E22 (v01 BXPC BXDSDT 00000001 INTL 20090123)
[ 0.000000] ACPI: FACS 000000001ffffe00 00040
[ 0.000000] ACPI: SSDT 000000001fffdf80 00044 (v01 BOCHS BXPCSSDT 00000001 BXPC 00000001)
[ 0.000000] ACPI: APIC 000000001fffde90 0007A (v01 BOCHS BXPCAPIC 00000001 BXPC 00000001)
[ 0.000000] ACPI: HPET 000000001fffde50 00038 (v01 BOCHS BXPCHPET 00000001 BXPC 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] (7 early reservations) ==> bootmem [0000000000 - 001fffd000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
[ 0.000000] #2 [0001000000 - 00013d08d8] TEXT DATA BSS ==> [0001000000 - 00013d08d8]
[ 0.000000] #3 [0017df5000 - 001803d7b1] RAMDISK ==> [0017df5000 - 001803d7b1]
[ 0.000000] #4 [000009bc00 - 0000100000] BIOS reserved ==> [000009bc00 - 0000100000]
[ 0.000000] #5 [00013d1000 - 00013d1071] BRK ==> [00013d1000 - 00013d1071]
[ 0.000000] #6 [0000008000 - 0000009000] PGTABLE ==> [0000008000 - 0000009000]
[ 0.000000] kvm-clock: cpu 0, msr 0:1322601, boot clock
[ 0.000000] [ffffea0000000000-ffffea00007fffff] PMD -> [ffff880001800000-ffff880001ffffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00100000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x0000009b
[ 0.000000] 0: 0x00000100 -> 0x0001fffd
[ 0.000000] On node 0 totalpages: 130968
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 104 pages reserved
[ 0.000000] DMA zone: 3835 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 1736 pages used for memmap
[ 0.000000] DMA32 zone: 125237 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0xb008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ5 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] ACPI: IRQ10 used by override.
[ 0.000000] ACPI: IRQ11 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] Allocating PCI resources starting at 20000000 (gap: 20000000:dffc0000)
[ 0.000000] Booting paravirtualized kernel on KVM
[ 0.000000] NR_CPUS:6 nr_cpumask_bits:6 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 26 pages/cpu @ffff880001400000 s73816 r8192 d24488 u1048576
[ 0.000000] pcpu-alloc: s73816 r8192 d24488 u1048576 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] kvm-clock: cpu 0, msr 0:1411601, primary cpu clock
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129072
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32.24-201010092338-guestmp root=UUID=22a4b388-70e0-4d2a-9aa1-bd842504378a ro quiet
[ 0.000000] PID hash table entries: 2048 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Memory: 507724k/524276k available (2072k kernel code, 404k absent, 15504k reserved, 1063k data, 452k init)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:448
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.000000] Detected 2799.842 MHz processor.
[ 0.012000] Calibrating delay loop (skipped) preset value.. 5599.68 BogoMIPS (lpj=11199368)
[ 0.012000] Mount-cache hash table entries: 256
[ 0.012000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.012000] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.012000] using C1E aware idle routine
[ 0.012000] Performance Events: AMD PMU driver.
[ 0.012000] ... version: 0
[ 0.012000] ... bit width: 48
[ 0.012000] ... generic registers: 4
[ 0.012000] ... value mask: 0000ffffffffffff
[ 0.012000] ... max period: 00007fffffffffff
[ 0.012000] ... fixed-purpose events: 0
[ 0.012000] ... event mask: 000000000000000f
[ 0.012000] Freeing SMP alternatives: 20k freed
[ 0.012019] ACPI: Core revision 20090903
[ 0.014379] Setting APIC routing to flat
[ 0.015667] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.015669] CPU0: AMD Athlon(tm) II X2 240 Processor stepping 02
[ 0.016000] Booting processor 1 APIC 0x1 ip 0x6000
[ 0.012000] Initializing CPU#1
[ 0.012000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.012000] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.012000] kvm-clock: cpu 1, msr 0:1511601, secondary cpu clock
[ 0.025724] CPU1: AMD Athlon(tm) II X2 240 Processor stepping 02
[ 0.025724] Brought up 2 CPUs
[ 0.025724] Total of 2 processors activated (11199.36 BogoMIPS).
[ 0.025724] x86 PAT enabled: cpu 1, old 0x0, new 0x7010600070106
[ 0.028000] NET: Registered protocol family 16
[ 0.028000] ACPI: bus type pci registered
[ 0.028000] PCI: Using configuration type 1 for base access
[ 0.028000] PCI: Using configuration type 1 for extended access
[ 0.028000] mtrr: your CPUs had inconsistent variable MTRR settings
[ 0.028000] mtrr: your CPUs had inconsistent MTRRdefType settings
[ 0.028000] mtrr: probably your BIOS does not setup all CPUs.
[ 0.028000] mtrr: corrected configuration.
[ 0.040000] bio: create slab <bio-0> at 0
[ 0.040000] ACPI: EC: Look up EC in DSDT
[ 0.040000] ACPI: Interpreter enabled
[ 0.040000] ACPI: (supports S0 S5)
[ 0.040000] ACPI: Using IOAPIC for interrupt routing
[ 0.064000] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.064000] pci 0000:00:01.1: reg 20 io port: [0xc000-0xc00f]
[ 0.064000] pci 0000:00:01.3: quirk: region b000-b03f claimed by PIIX4 ACPI
[ 0.064000] pci 0000:00:01.3: quirk: region b100-b10f claimed by PIIX4 SMB
[ 0.068000] pci 0000:00:02.0: reg 10 32bit mmio pref: [0xf0000000-0xf1ffffff]
[ 0.068000] pci 0000:00:02.0: reg 14 32bit mmio: [0xf2000000-0xf2000fff]
[ 0.072000] pci 0000:00:02.0: reg 30 32bit mmio pref: [0xf2010000-0xf201ffff]
[ 0.072000] pci 0000:00:03.0: reg 10 io port: [0xc020-0xc03f]
[ 0.072000] pci 0000:00:03.0: reg 14 32bit mmio: [0xf2020000-0xf2020fff]
[ 0.072000] pci 0000:00:03.0: reg 30 32bit mmio pref: [0xf2030000-0xf203ffff]
[ 0.072000] pci 0000:00:04.0: reg 10 io port: [0xc040-0xc05f]
[ 0.072000] pci 0000:00:05.0: reg 10 io port: [0xc080-0xc0bf]
[ 0.072000] pci 0000:00:05.0: reg 14 32bit mmio: [0xf2040000-0xf2040fff]
[ 0.072000] pci 0000:00:06.0: reg 10 io port: [0xc0c0-0xc0ff]
[ 0.072000] pci 0000:00:06.0: reg 14 32bit mmio: [0xf2041000-0xf2041fff]
[ 0.072000] pci_bus 0000:00: on NUMA node 0
[ 0.072000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.080000] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11)
[ 0.080000] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11)
[ 0.080000] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11)
[ 0.080000] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11)
[ 0.084000] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.084000] vgaarb: loaded
[ 0.084000] PCI: Using ACPI for IRQ routing
[ 0.084000] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.088000] hpet0: 3 comparators, 64-bit 100.000000 MHz counter
[ 0.096000] Switching to clocksource kvm-clock
[ 0.096000] pnp: PnP ACPI init
[ 0.096000] ACPI: bus type pnp registered
[ 0.096000] pnp: PnP ACPI: found 7 devices
[ 0.096000] ACPI: ACPI bus type pnp unregistered
[ 0.096000] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.096000] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
[ 0.096000] NET: Registered protocol family 2
[ 0.096000] IP route cache hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.096000] TCP established hash table entries: 16384 (order: 6, 262144 bytes)
[ 0.096000] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
[ 0.096000] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.096000] TCP reno registered
[ 0.096000] NET: Registered protocol family 1
[ 0.096000] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
[ 0.096000] pci 0000:00:01.0: PIIX3: Enabling Passive Release
[ 0.096000] pci 0000:00:01.0: Activating ISA DMA hang workarounds
[ 0.096000] pci 0000:00:02.0: Boot video device
[ 0.096000] Unpacking initramfs...
[ 0.096000] Freeing initrd memory: 2337k freed
[ 0.096000] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.096000] msgmni has been set to 997
[ 0.096000] alg: No test for stdrng (krng)
[ 0.096000] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.096000] io scheduler noop registered
[ 0.096000] io scheduler anticipatory registered
[ 0.096000] io scheduler deadline registered
[ 0.096000] io scheduler cfq registered (default)
[ 0.096000] PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[ 0.096000] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.096000] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.096000] mice: PS/2 mouse device common for all mice
[ 0.096000] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[ 0.096000] rtc0: alarms up to one day, 114 bytes nvram, hpet irqs
[ 0.096000] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.096000] cpuidle: using governor ladder
[ 0.096000] cpuidle: using governor menu
[ 0.096000] TCP cubic registered
[ 0.096000] NET: Registered protocol family 17
[ 0.096000] rtc_cmos 00:01: setting system clock to 2010-10-10 00:15:08 UTC (1286669708)
[ 0.096000] Freeing unused kernel memory: 452k freed
[ 0.096000] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
[ 0.096000] virtio-pci 0000:00:03.0: PCI INT A -> Link[LNKC] -> GSI 11 (level, high) -> IRQ 11
[ 0.096000] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10
[ 0.096000] virtio-pci 0000:00:04.0: PCI INT A -> Link[LNKD] -> GSI 10 (level, high) -> IRQ 10
[ 0.096000] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
[ 0.096000] virtio-pci 0000:00:05.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, high) -> IRQ 10
[ 0.096000] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
[ 0.096000] virtio-pci 0000:00:06.0: PCI INT A -> Link[LNKB] -> GSI 11 (level, high) -> IRQ 11
[ 0.096000] virtio-pci 0000:00:05.0: irq 24 for MSI/MSI-X
[ 0.096000] virtio-pci 0000:00:05.0: irq 25 for MSI/MSI-X
[ 0.096000] vda: vda1 vda2 < vda5 >
[ 0.096000] virtio-pci 0000:00:03.0: irq 26 for MSI/MSI-X
[ 0.096000] virtio-pci 0000:00:03.0: irq 27 for MSI/MSI-X
[ 0.096000] virtio-pci 0000:00:03.0: irq 28 for MSI/MSI-X
[ 0.096000] virtio-pci 0000:00:06.0: irq 29 for MSI/MSI-X
[ 0.096000] virtio-pci 0000:00:06.0: irq 30 for MSI/MSI-X
[ 0.096000] vdb: vdb1
[ 0.655063] kjournald starting. Commit interval 5 seconds
[ 0.655106] EXT3-fs: mounted filesystem with writeback data mode.
[ 1.009125] Clocksource tsc unstable (delta = 303360937 ns)
[ 2.278086] udev: starting version 160
[ 2.971618] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 2.971640] ACPI: Power Button [PWRF]
[ 3.156974] processor LNXCPU:00: registered as cooling_device0
[ 3.157091] processor LNXCPU:01: registered as cooling_device1
[ 4.305146] Adding 409616k swap on /dev/vda5. Priority:-1 extents:1 across:409616k
[ 4.465152] EXT3 FS on vda1, internal journal
[ 4.642414] loop: module loaded
[-- Attachment #3: dmesg-tsc-stable.txt --]
[-- Type: text/plain, Size: 15231 bytes --]
[ 0.000000] Linux version 2.6.32.24-201010092338-guestmp (arjan@dev-lenny) (gcc version 4.4.5 20100728 (prerelease) (Debian 4.4.4-8) ) #1 SMP Sat Oct 9 23:42:46 UTC 2010
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32.24-201010092338-guestmp root=UUID=22a4b388-70e0-4d2a-9aa1-bd842504378a ro quiet
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009bc00 (usable)
[ 0.000000] BIOS-e820: 000000000009bc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000001fffd000 (usable)
[ 0.000000] BIOS-e820: 000000001fffd000 - 0000000020000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: feffd00000000000 - ff00100000000000 (reserved)
[ 0.000000] DMI 2.4 present.
[ 0.000000] last_pfn = 0x1fffd max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: write-back
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 00E0000000 mask FFE0000000 uncachable
[ 0.000000] 1 disabled
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x0, new 0x7010600070106
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: 0000000000000000-000000001fffd000
[ 0.000000] 0000000000 - 001fe00000 page 2M
[ 0.000000] 001fe00000 - 001fffd000 page 4k
[ 0.000000] kernel direct mapping tables up to 1fffd000 @ 8000-b000
[ 0.000000] RAMDISK: 17df5000 - 1803d7b1
[ 0.000000] ACPI: RSDP 00000000000fdb80 00014 (v00 BOCHS )
[ 0.000000] ACPI: RSDT 000000001fffde10 00034 (v01 BOCHS BXPCRSDT 00000001 BXPC 00000001)
[ 0.000000] ACPI: FACP 000000001ffffe40 00074 (v01 BOCHS BXPCFACP 00000001 BXPC 00000001)
[ 0.000000] ACPI: DSDT 000000001fffdfd0 01E22 (v01 BXPC BXDSDT 00000001 INTL 20090123)
[ 0.000000] ACPI: FACS 000000001ffffe00 00040
[ 0.000000] ACPI: SSDT 000000001fffdf80 00044 (v01 BOCHS BXPCSSDT 00000001 BXPC 00000001)
[ 0.000000] ACPI: APIC 000000001fffde90 0007A (v01 BOCHS BXPCAPIC 00000001 BXPC 00000001)
[ 0.000000] ACPI: HPET 000000001fffde50 00038 (v01 BOCHS BXPCHPET 00000001 BXPC 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] (7 early reservations) ==> bootmem [0000000000 - 001fffd000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
[ 0.000000] #2 [0001000000 - 00013d08d8] TEXT DATA BSS ==> [0001000000 - 00013d08d8]
[ 0.000000] #3 [0017df5000 - 001803d7b1] RAMDISK ==> [0017df5000 - 001803d7b1]
[ 0.000000] #4 [000009bc00 - 0000100000] BIOS reserved ==> [000009bc00 - 0000100000]
[ 0.000000] #5 [00013d1000 - 00013d1071] BRK ==> [00013d1000 - 00013d1071]
[ 0.000000] #6 [0000008000 - 0000009000] PGTABLE ==> [0000008000 - 0000009000]
[ 0.000000] kvm-clock: cpu 0, msr 0:1322601, boot clock
[ 0.000000] [ffffea0000000000-ffffea00007fffff] PMD -> [ffff880001800000-ffff880001ffffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00100000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x0000009b
[ 0.000000] 0: 0x00000100 -> 0x0001fffd
[ 0.000000] On node 0 totalpages: 130968
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 104 pages reserved
[ 0.000000] DMA zone: 3835 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 1736 pages used for memmap
[ 0.000000] DMA32 zone: 125237 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0xb008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ5 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] ACPI: IRQ10 used by override.
[ 0.000000] ACPI: IRQ11 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] Allocating PCI resources starting at 20000000 (gap: 20000000:dffc0000)
[ 0.000000] Booting paravirtualized kernel on KVM
[ 0.000000] NR_CPUS:6 nr_cpumask_bits:6 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 26 pages/cpu @ffff880001400000 s73816 r8192 d24488 u1048576
[ 0.000000] pcpu-alloc: s73816 r8192 d24488 u1048576 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] kvm-clock: cpu 0, msr 0:1411601, primary cpu clock
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129072
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32.24-201010092338-guestmp root=UUID=22a4b388-70e0-4d2a-9aa1-bd842504378a ro quiet
[ 0.000000] PID hash table entries: 2048 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Memory: 507724k/524276k available (2072k kernel code, 404k absent, 15504k reserved, 1063k data, 452k init)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:448
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.000000] Detected 2800.486 MHz processor.
[ 0.012000] Calibrating delay loop (skipped) preset value.. 5600.97 BogoMIPS (lpj=11201944)
[ 0.012000] Mount-cache hash table entries: 256
[ 0.012000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.012000] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.012000] using C1E aware idle routine
[ 0.012000] Performance Events: AMD PMU driver.
[ 0.012000] ... version: 0
[ 0.012000] ... bit width: 48
[ 0.012000] ... generic registers: 4
[ 0.012000] ... value mask: 0000ffffffffffff
[ 0.012000] ... max period: 00007fffffffffff
[ 0.012000] ... fixed-purpose events: 0
[ 0.012000] ... event mask: 000000000000000f
[ 0.012100] Freeing SMP alternatives: 20k freed
[ 0.012114] ACPI: Core revision 20090903
[ 0.014445] Setting APIC routing to flat
[ 0.015790] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.015793] CPU0: AMD Athlon(tm) II X2 240 Processor stepping 02
[ 0.016000] Booting processor 1 APIC 0x1 ip 0x6000
[ 0.012000] Initializing CPU#1
[ 0.012000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.012000] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.012000] kvm-clock: cpu 1, msr 0:1511601, secondary cpu clock
[ 0.024078] CPU1: AMD Athlon(tm) II X2 240 Processor stepping 02
[ 0.024108] Brought up 2 CPUs
[ 0.024110] Total of 2 processors activated (11201.94 BogoMIPS).
[ 0.024411] x86 PAT enabled: cpu 1, old 0x0, new 0x7010600070106
[ 0.025259] NET: Registered protocol family 16
[ 0.028133] ACPI: bus type pci registered
[ 0.028133] PCI: Using configuration type 1 for base access
[ 0.028133] PCI: Using configuration type 1 for extended access
[ 0.028188] mtrr: your CPUs had inconsistent variable MTRR settings
[ 0.028188] mtrr: your CPUs had inconsistent MTRRdefType settings
[ 0.028188] mtrr: probably your BIOS does not setup all CPUs.
[ 0.028188] mtrr: corrected configuration.
[ 0.036221] bio: create slab <bio-0> at 0
[ 0.044346] ACPI: EC: Look up EC in DSDT
[ 0.049855] ACPI: Interpreter enabled
[ 0.049857] ACPI: (supports S0 S5)
[ 0.049867] ACPI: Using IOAPIC for interrupt routing
[ 0.068474] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.072834] pci 0000:00:01.1: reg 20 io port: [0xc000-0xc00f]
[ 0.073227] pci 0000:00:01.3: quirk: region b000-b03f claimed by PIIX4 ACPI
[ 0.073239] pci 0000:00:01.3: quirk: region b100-b10f claimed by PIIX4 SMB
[ 0.075565] pci 0000:00:02.0: reg 10 32bit mmio pref: [0xf0000000-0xf1ffffff]
[ 0.075565] pci 0000:00:02.0: reg 14 32bit mmio: [0xf2000000-0xf2000fff]
[ 0.075565] pci 0000:00:02.0: reg 30 32bit mmio pref: [0xf2010000-0xf201ffff]
[ 0.075565] pci 0000:00:03.0: reg 10 io port: [0xc020-0xc03f]
[ 0.075565] pci 0000:00:03.0: reg 14 32bit mmio: [0xf2020000-0xf2020fff]
[ 0.075619] pci 0000:00:03.0: reg 30 32bit mmio pref: [0xf2030000-0xf203ffff]
[ 0.080155] pci 0000:00:04.0: reg 10 io port: [0xc040-0xc05f]
[ 0.080533] pci 0000:00:05.0: reg 10 io port: [0xc080-0xc0bf]
[ 0.080592] pci 0000:00:05.0: reg 14 32bit mmio: [0xf2040000-0xf2040fff]
[ 0.081031] pci 0000:00:06.0: reg 10 io port: [0xc0c0-0xc0ff]
[ 0.081089] pci 0000:00:06.0: reg 14 32bit mmio: [0xf2041000-0xf2041fff]
[ 0.081536] pci_bus 0000:00: on NUMA node 0
[ 0.081604] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.092368] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11)
[ 0.092614] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11)
[ 0.092822] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11)
[ 0.093030] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11)
[ 0.093246] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.093246] vgaarb: loaded
[ 0.096176] PCI: Using ACPI for IRQ routing
[ 0.096631] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.096631] hpet0: 3 comparators, 64-bit 100.000000 MHz counter
[ 0.112094] Switching to clocksource kvm-clock
[ 0.112665] pnp: PnP ACPI init
[ 0.112710] ACPI: bus type pnp registered
[ 0.117907] pnp: PnP ACPI: found 7 devices
[ 0.117914] ACPI: ACPI bus type pnp unregistered
[ 0.127084] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.127093] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
[ 0.127513] NET: Registered protocol family 2
[ 0.127902] IP route cache hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.128916] TCP established hash table entries: 16384 (order: 6, 262144 bytes)
[ 0.129442] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
[ 0.129976] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.129987] TCP reno registered
[ 0.130420] NET: Registered protocol family 1
[ 0.130462] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
[ 0.130498] pci 0000:00:01.0: PIIX3: Enabling Passive Release
[ 0.130529] pci 0000:00:01.0: Activating ISA DMA hang workarounds
[ 0.130559] pci 0000:00:02.0: Boot video device
[ 0.130721] Unpacking initramfs...
[ 0.177652] Freeing initrd memory: 2337k freed
[ 0.184652] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.185509] msgmni has been set to 997
[ 0.186409] alg: No test for stdrng (krng)
[ 0.186897] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.186906] io scheduler noop registered
[ 0.186908] io scheduler anticipatory registered
[ 0.186909] io scheduler deadline registered
[ 0.187038] io scheduler cfq registered (default)
[ 0.219030] PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[ 0.220785] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.220803] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.221828] mice: PS/2 mouse device common for all mice
[ 0.223661] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[ 0.223792] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.224291] rtc0: alarms up to one day, 114 bytes nvram, hpet irqs
[ 0.224441] cpuidle: using governor ladder
[ 0.224447] cpuidle: using governor menu
[ 0.226020] TCP cubic registered
[ 0.226026] NET: Registered protocol family 17
[ 0.228262] rtc_cmos 00:01: setting system clock to 2010-10-09 23:52:14 UTC (1286668334)
[ 0.228523] Freeing unused kernel memory: 452k freed
[ 0.319112] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
[ 0.319139] virtio-pci 0000:00:03.0: PCI INT A -> Link[LNKC] -> GSI 11 (level, high) -> IRQ 11
[ 0.319275] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10
[ 0.319290] virtio-pci 0000:00:04.0: PCI INT A -> Link[LNKD] -> GSI 10 (level, high) -> IRQ 10
[ 0.319440] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
[ 0.319443] virtio-pci 0000:00:05.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, high) -> IRQ 10
[ 0.319592] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
[ 0.319595] virtio-pci 0000:00:06.0: PCI INT A -> Link[LNKB] -> GSI 11 (level, high) -> IRQ 11
[ 0.365438] virtio-pci 0000:00:03.0: irq 24 for MSI/MSI-X
[ 0.365455] virtio-pci 0000:00:03.0: irq 25 for MSI/MSI-X
[ 0.365468] virtio-pci 0000:00:03.0: irq 26 for MSI/MSI-X
[ 0.366915] virtio-pci 0000:00:05.0: irq 27 for MSI/MSI-X
[ 0.366930] virtio-pci 0000:00:05.0: irq 28 for MSI/MSI-X
[ 0.367356] vda: vda1 vda2 < vda5 >
[ 0.393528] virtio-pci 0000:00:06.0: irq 29 for MSI/MSI-X
[ 0.393542] virtio-pci 0000:00:06.0: irq 30 for MSI/MSI-X
[ 0.394301] vdb: vdb1
[ 0.940463] kjournald starting. Commit interval 5 seconds
[ 0.940574] EXT3-fs: mounted filesystem with writeback data mode.
[ 2.603464] udev: starting version 160
[ 3.120632] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 3.120646] ACPI: Power Button [PWRF]
[ 3.328008] processor LNXCPU:00: registered as cooling_device0
[ 3.328080] processor LNXCPU:01: registered as cooling_device1
[ 4.534367] Adding 409616k swap on /dev/vda5. Priority:-1 extents:1 across:409616k
[ 4.702659] EXT3 FS on vda1, internal journal
[ 4.838516] loop: module loaded
[-- Attachment #4: 2.6.32.24.diff --]
[-- Type: text/x-patch, Size: 938 bytes --]
diff --git a/arch/x86/kvm/svm.c b/arch/x86/kvm/svm.c
index 61ba669..a5882fb 100644
--- a/arch/x86/kvm/svm.c
+++ b/arch/x86/kvm/svm.c
@@ -797,15 +797,17 @@ static void svm_vcpu_load(struct kvm_vcpu *vcpu, int cpu)
if (unlikely(cpu != vcpu->cpu)) {
u64 tsc_this, delta;
- /*
- * Make sure that the guest sees a monotonically
- * increasing TSC.
- */
- rdtscll(tsc_this);
- delta = vcpu->arch.host_tsc - tsc_this;
- svm->vmcb->control.tsc_offset += delta;
- if (is_nested(svm))
- svm->nested.hsave->control.tsc_offset += delta;
+ if (check_tsc_unstable()) {
+ /*
+ * Make sure that the guest sees a monotonically
+ * increasing TSC.
+ */
+ rdtscll(tsc_this);
+ delta = vcpu->arch.host_tsc - tsc_this;
+ svm->vmcb->control.tsc_offset += delta;
+ if (is_nested(svm))
+ svm->nested.hsave->control.tsc_offset += delta;
+ }
vcpu->cpu = cpu;
kvm_migrate_timers(vcpu);
svm->asid_generation = 0;
[-- Attachment #5: 2.6.33.7.diff --]
[-- Type: text/x-patch, Size: 901 bytes --]
diff --git a/arch/x86/kvm/svm.c b/arch/x86/kvm/svm.c
index 8d128be..77f119c 100644
--- a/arch/x86/kvm/svm.c
+++ b/arch/x86/kvm/svm.c
@@ -801,14 +801,16 @@ static void svm_vcpu_load(struct kvm_vcpu *vcpu, int cpu)
if (unlikely(cpu != vcpu->cpu)) {
u64 delta;
- /*
- * Make sure that the guest sees a monotonically
- * increasing TSC.
- */
- delta = vcpu->arch.host_tsc - native_read_tsc();
- svm->vmcb->control.tsc_offset += delta;
- if (is_nested(svm))
- svm->nested.hsave->control.tsc_offset += delta;
+ if (check_tsc_unstable()) {
+ /*
+ * Make sure that the guest sees a monotonically
+ * increasing TSC.
+ */
+ delta = vcpu->arch.host_tsc - native_read_tsc();
+ svm->vmcb->control.tsc_offset += delta;
+ if (is_nested(svm))
+ svm->nested.hsave->control.tsc_offset += delta;
+ }
vcpu->cpu = cpu;
kvm_migrate_timers(vcpu);
svm->asid_generation = 0;
next prev parent reply other threads:[~2010-10-10 1:39 UTC|newest]
Thread overview: 81+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-07-22 12:53 2.6.35-rc1 regression with pvclock and smp guests Andre Przywara
2010-07-25 8:44 ` Avi Kivity
2010-07-26 8:47 ` Andre Przywara
2010-07-26 18:59 ` Arjan Koers
2010-07-27 21:00 ` Arjan Koers
2010-07-28 10:37 ` Avi Kivity
2010-07-31 0:34 ` Arjan Koers
2010-07-31 1:38 ` Zachary Amsden
2010-07-31 11:50 ` Arjan Koers
2010-07-31 2:39 ` Zachary Amsden
2010-07-31 11:53 ` Arjan Koers
2010-07-31 16:36 ` Arjan Koers
2010-07-31 19:45 ` Arjan Koers
2010-07-31 23:55 ` Zachary Amsden
2010-08-02 14:43 ` Glauber Costa
2010-08-02 16:16 ` Arjan Koers
2010-08-02 18:07 ` Glauber Costa
2010-08-02 20:26 ` Zachary Amsden
2010-08-02 21:10 ` Glauber Costa
2010-08-02 21:35 ` Arjan Koers
2010-08-03 0:00 ` Zachary Amsden
2010-09-28 11:16 ` Michael Tokarev
2010-09-29 8:12 ` Michael Tokarev
2010-09-29 8:28 ` Avi Kivity
2010-09-29 9:17 ` Michael Tokarev
2010-09-29 9:19 ` Michael Tokarev
2010-09-29 19:26 ` Arjan Koers
2010-09-30 7:55 ` Michael Tokarev
2010-09-30 9:59 ` Michael Tokarev
2010-09-30 13:54 ` Zachary Amsden
2010-09-30 15:12 ` Michael Tokarev
2010-09-30 15:32 ` Zachary Amsden
2010-09-30 18:49 ` Arjan Koers
2010-09-30 19:05 ` Marcelo Tosatti
2010-09-30 20:16 ` Arjan Koers
2010-09-30 23:02 ` Michael Tokarev
2010-09-30 23:07 ` Michael Tokarev
2010-10-01 1:13 ` Zachary Amsden
2010-10-02 5:35 ` Zachary Amsden
2010-10-02 7:35 ` Michael Tokarev
2010-10-02 7:40 ` Michael Tokarev
2010-10-02 7:50 ` Michael Tokarev
2010-10-02 16:10 ` Arjan Koers
2010-10-02 20:26 ` Michael Tokarev
2010-10-02 23:42 ` Zachary Amsden
2010-10-03 8:27 ` Michael Tokarev
2010-10-08 0:12 ` Arjan Koers
2010-10-08 2:47 ` Zachary Amsden
2010-10-08 22:06 ` Marcelo Tosatti
2010-10-09 1:10 ` Arjan Koers
2010-10-09 2:27 ` Zachary Amsden
2010-10-09 6:29 ` Michael Tokarev
2010-10-09 8:59 ` Arjan Koers
2010-10-11 20:47 ` Zachary Amsden
2010-10-13 12:18 ` Glauber Costa
2010-10-10 1:20 ` Arjan Koers
2010-10-11 17:53 ` Anthony Liguori
2010-10-11 18:36 ` Marcelo Tosatti
2010-10-09 2:29 ` Zachary Amsden
2010-10-10 1:26 ` Arjan Koers [this message]
2010-10-20 20:47 ` Arjan Koers
2010-10-09 7:59 ` Michael Tokarev
2010-10-09 8:31 ` Michael Tokarev
2010-10-02 21:55 ` Zachary Amsden
2010-10-03 8:16 ` Michael Tokarev
2010-10-03 8:22 ` Avi Kivity
2010-10-03 8:30 ` Michael Tokarev
2010-07-27 10:03 ` Avi Kivity
2010-07-27 11:49 ` Andre Przywara
2010-07-27 12:06 ` Avi Kivity
2010-07-27 12:21 ` Andre Przywara
2010-07-27 12:34 ` Avi Kivity
2010-07-27 13:48 ` Andre Przywara
2010-07-27 13:58 ` Avi Kivity
2010-07-27 14:55 ` Andre Przywara
2010-07-27 21:51 ` Andre Przywara
2010-07-28 3:00 ` Zachary Amsden
2010-07-28 7:55 ` Andre Przywara
2010-07-28 12:25 ` Andre Przywara
2010-07-30 22:54 ` Zachary Amsden
2010-08-02 10:12 ` Andre Przywara
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4CB1162A.5030802@xutrox.com \
--to=arjan@xutrox.com \
--cc=andre.przywara@amd.com \
--cc=avi@redhat.com \
--cc=glommer@redhat.com \
--cc=kvm@vger.kernel.org \
--cc=mjt@tls.msk.ru \
--cc=mtosatti@redhat.com \
--cc=zamsden@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.