From: "Éric Piel" <eric.piel-VkQ1JFuSMpfAbQlEx87xDw@public.gmane.org>
To: Samu Onkalo <samu.p.onkalo-xNZwKgViW5gAvxtiuMwx3w@public.gmane.org>
Cc: khali-PUYAD+kWke1g9hUCZPvPmw@public.gmane.org,
guenter.roeck-IzeFyvvaP7pWk0Htik3J/w@public.gmane.org,
jic23-KWPb1pKIrIJaa/9Udqfwiw@public.gmane.org,
lm-sensors-GZX6beZjE8VD60Wz+7aTrA@public.gmane.org,
linux-i2c-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Subject: Re: [PATCH 00/12] lis3 accelerator feature update
Date: Sun, 24 Oct 2010 17:05:33 +0200 [thread overview]
Message-ID: <4CC44B3D.5030404@tremplin-utc.net> (raw)
In-Reply-To: <1287748654-2626-1-git-send-email-samu.p.onkalo-xNZwKgViW5gAvxtiuMwx3w@public.gmane.org>
Op 22-10-10 13:57, Samu Onkalo schreef:
> Changes are tested only with I2C interface using 8bit sensor since I don't
> have other possibilities. Some features are not enabled
> by default since I can't test them with all possible configurations.
> Platform data contains field which controls new features.
Thanks Samu for persevering with the automatic power down feature.
Hopefully I'll find also some time to activate it on the hp_accel side.
For now, I've reviewed the changes and everything looked fine, as well
as tested them on my HP laptop (with a 12 bits sensor). Although most of
the changes are not visible on this platform, at least there shouldn't
be any regression.
Thanks,
Eric
WARNING: multiple messages have this Message-ID (diff)
From: "Éric Piel" <eric.piel@tremplin-utc.net>
To: Samu Onkalo <samu.p.onkalo@nokia.com>
Cc: khali@linux-fr.org, guenter.roeck@ericsson.com, jic23@cam.ac.uk,
lm-sensors@lm-sensors.org, linux-i2c@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: Re: [lm-sensors] [PATCH 00/12] lis3 accelerator feature update
Date: Sun, 24 Oct 2010 15:05:33 +0000 [thread overview]
Message-ID: <4CC44B3D.5030404@tremplin-utc.net> (raw)
In-Reply-To: <1287748654-2626-1-git-send-email-samu.p.onkalo@nokia.com>
Op 22-10-10 13:57, Samu Onkalo schreef:
> Changes are tested only with I2C interface using 8bit sensor since I don't
> have other possibilities. Some features are not enabled
> by default since I can't test them with all possible configurations.
> Platform data contains field which controls new features.
Thanks Samu for persevering with the automatic power down feature.
Hopefully I'll find also some time to activate it on the hp_accel side.
For now, I've reviewed the changes and everything looked fine, as well
as tested them on my HP laptop (with a 12 bits sensor). Although most of
the changes are not visible on this platform, at least there shouldn't
be any regression.
Thanks,
Eric
_______________________________________________
lm-sensors mailing list
lm-sensors@lm-sensors.org
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
WARNING: multiple messages have this Message-ID (diff)
From: "Éric Piel" <eric.piel@tremplin-utc.net>
To: Samu Onkalo <samu.p.onkalo@nokia.com>
Cc: khali@linux-fr.org, guenter.roeck@ericsson.com, jic23@cam.ac.uk,
lm-sensors@lm-sensors.org, linux-i2c@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH 00/12] lis3 accelerator feature update
Date: Sun, 24 Oct 2010 17:05:33 +0200 [thread overview]
Message-ID: <4CC44B3D.5030404@tremplin-utc.net> (raw)
In-Reply-To: <1287748654-2626-1-git-send-email-samu.p.onkalo@nokia.com>
Op 22-10-10 13:57, Samu Onkalo schreef:
> Changes are tested only with I2C interface using 8bit sensor since I don't
> have other possibilities. Some features are not enabled
> by default since I can't test them with all possible configurations.
> Platform data contains field which controls new features.
Thanks Samu for persevering with the automatic power down feature.
Hopefully I'll find also some time to activate it on the hp_accel side.
For now, I've reviewed the changes and everything looked fine, as well
as tested them on my HP laptop (with a 12 bits sensor). Although most of
the changes are not visible on this platform, at least there shouldn't
be any regression.
Thanks,
Eric
next prev parent reply other threads:[~2010-10-24 15:05 UTC|newest]
Thread overview: 101+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-10-22 11:57 [PATCH 00/12] lis3 accelerator feature update Samu Onkalo
2010-10-22 11:57 ` [lm-sensors] " Samu Onkalo
2010-10-22 11:57 ` [PATCH 03/12] hwmon: lis3: Cleanup interrupt handling Samu Onkalo
2010-10-22 11:57 ` [lm-sensors] " Samu Onkalo
2010-10-24 14:18 ` Éric Piel
2010-10-24 14:18 ` Éric Piel
2010-10-24 14:18 ` [lm-sensors] [PATCH 03/12] hwmon: lis3: Cleanup interrupt Éric Piel
2010-10-22 11:57 ` [PATCH 04/12] hwmon: lis3: Update coordinates at polled device open Samu Onkalo
2010-10-22 11:57 ` [lm-sensors] [PATCH 04/12] hwmon: lis3: Update coordinates at Samu Onkalo
2010-10-24 14:19 ` [PATCH 04/12] hwmon: lis3: Update coordinates at polled device open Éric Piel
2010-10-24 14:19 ` [lm-sensors] [PATCH 04/12] hwmon: lis3: Update coordinates at Éric Piel
2010-10-22 11:57 ` [PATCH 05/12] hwmon: lis3: Power on corrections Samu Onkalo
2010-10-22 11:57 ` Samu Onkalo
2010-10-22 11:57 ` [lm-sensors] " Samu Onkalo
2010-10-24 14:22 ` Éric Piel
2010-10-24 14:22 ` Éric Piel
2010-10-24 14:22 ` [lm-sensors] " Éric Piel
2010-10-22 11:57 ` [PATCH 07/12] hwmon: lis3: New parameters to platform data Samu Onkalo
2010-10-22 11:57 ` [lm-sensors] [PATCH 07/12] hwmon: lis3: New parameters to platform Samu Onkalo
[not found] ` <1287748654-2626-8-git-send-email-samu.p.onkalo-xNZwKgViW5gAvxtiuMwx3w@public.gmane.org>
2010-10-22 16:17 ` [PATCH 07/12] hwmon: lis3: New parameters to platform data Jonathan Cameron
2010-10-22 16:17 ` Jonathan Cameron
2010-10-22 16:17 ` [lm-sensors] [PATCH 07/12] hwmon: lis3: New parameters to Jonathan Cameron
2010-10-24 14:27 ` [PATCH 07/12] hwmon: lis3: New parameters to platform data Éric Piel
2010-10-24 14:27 ` Éric Piel
2010-10-24 14:27 ` [lm-sensors] [PATCH 07/12] hwmon: lis3: New parameters to Éric Piel
2010-10-22 11:57 ` [PATCH 08/12] hwmon: lis3: Adjust fuzziness for 8 bit device Samu Onkalo
2010-10-22 11:57 ` [lm-sensors] [PATCH 08/12] hwmon: lis3: Adjust fuzziness for 8 bit Samu Onkalo
2010-10-24 14:33 ` [PATCH 08/12] hwmon: lis3: Adjust fuzziness for 8 bit device Éric Piel
2010-10-24 14:33 ` [lm-sensors] [PATCH 08/12] hwmon: lis3: Adjust fuzziness for 8 Éric Piel
2010-10-22 11:57 ` [PATCH 09/12] hwmon: lis3: use block read to access data registers Samu Onkalo
2010-10-22 11:57 ` [lm-sensors] [PATCH 09/12] hwmon: lis3: use block read to access Samu Onkalo
2010-10-22 16:20 ` [PATCH 09/12] hwmon: lis3: use block read to access data registers Jonathan Cameron
2010-10-22 16:20 ` [lm-sensors] [PATCH 09/12] hwmon: lis3: use block read to Jonathan Cameron
2010-10-24 14:53 ` [PATCH 09/12] hwmon: lis3: use block read to access data registers Éric Piel
2010-10-24 14:53 ` [lm-sensors] [PATCH 09/12] hwmon: lis3: use block read to Éric Piel
2010-10-22 11:57 ` [PATCH 10/12] hwmon: lis3: Enhance lis3 selftest with IRQ line test Samu Onkalo
2010-10-22 11:57 ` [lm-sensors] [PATCH 10/12] hwmon: lis3: Enhance lis3 selftest with Samu Onkalo
[not found] ` <1287748654-2626-11-git-send-email-samu.p.onkalo-xNZwKgViW5gAvxtiuMwx3w@public.gmane.org>
2010-10-24 14:58 ` [PATCH 10/12] hwmon: lis3: Enhance lis3 selftest with IRQ line test Éric Piel
2010-10-24 14:58 ` Éric Piel
2010-10-24 14:58 ` [lm-sensors] [PATCH 10/12] hwmon: lis3: Enhance lis3 selftest Éric Piel
[not found] ` <1287748654-2626-1-git-send-email-samu.p.onkalo-xNZwKgViW5gAvxtiuMwx3w@public.gmane.org>
2010-10-22 11:57 ` [PATCH 01/12] hwmon: lis3: pm_runtime support Samu Onkalo
2010-10-22 11:57 ` Samu Onkalo
2010-10-22 11:57 ` [lm-sensors] " Samu Onkalo
[not found] ` <1287748654-2626-2-git-send-email-samu.p.onkalo-xNZwKgViW5gAvxtiuMwx3w@public.gmane.org>
2010-10-22 16:13 ` Jonathan Cameron
2010-10-22 16:13 ` Jonathan Cameron
2010-10-22 16:13 ` [lm-sensors] " Jonathan Cameron
2010-10-24 14:03 ` Éric Piel
2010-10-24 14:03 ` Éric Piel
2010-10-24 14:03 ` [lm-sensors] " Éric Piel
2010-10-22 11:57 ` [PATCH 02/12] hwmon: lis3: regulator control Samu Onkalo
2010-10-22 11:57 ` Samu Onkalo
2010-10-22 11:57 ` [lm-sensors] " Samu Onkalo
[not found] ` <1287748654-2626-3-git-send-email-samu.p.onkalo-xNZwKgViW5gAvxtiuMwx3w@public.gmane.org>
2010-10-22 16:11 ` Jonathan Cameron
2010-10-22 16:11 ` Jonathan Cameron
2010-10-22 16:11 ` [lm-sensors] " Jonathan Cameron
2010-10-24 14:59 ` Éric Piel
2010-10-24 14:59 ` [lm-sensors] " Éric Piel
2010-10-22 11:57 ` [PATCH 06/12] hwmon: lis3: restore axis enabled bits Samu Onkalo
2010-10-22 11:57 ` Samu Onkalo
2010-10-22 11:57 ` [lm-sensors] " Samu Onkalo
2010-10-24 14:24 ` Éric Piel
2010-10-24 14:24 ` [lm-sensors] [PATCH 06/12] hwmon: lis3: restore axis enabled Éric Piel
2010-10-22 11:57 ` [PATCH 11/12] hwmon: lis3: Short explanations of platform data fields Samu Onkalo
2010-10-22 11:57 ` Samu Onkalo
2010-10-22 11:57 ` [lm-sensors] [PATCH 11/12] hwmon: lis3: Short explanations of Samu Onkalo
[not found] ` <1287748654-2626-12-git-send-email-samu.p.onkalo-xNZwKgViW5gAvxtiuMwx3w@public.gmane.org>
2010-10-22 16:25 ` [PATCH 11/12] hwmon: lis3: Short explanations of platform data fields Jonathan Cameron
2010-10-22 16:25 ` Jonathan Cameron
2010-10-22 16:25 ` [lm-sensors] [PATCH 11/12] hwmon: lis3: Short explanations of Jonathan Cameron
[not found] ` <4CC1BAEE.3030708-KWPb1pKIrIJaa/9Udqfwiw@public.gmane.org>
2010-10-23 13:39 ` [PATCHv2] hwmon: lis3: Short explanations of platform data fields Samu Onkalo
2010-10-23 13:39 ` [lm-sensors] [PATCHv2] hwmon: lis3: Short explanations of platform Samu Onkalo
[not found] ` <1287841184-4871-1-git-send-email-samu.p.onkalo-xNZwKgViW5gAvxtiuMwx3w@public.gmane.org>
2010-10-24 14:59 ` [PATCHv2] hwmon: lis3: Short explanations of platform data fields Éric Piel
2010-10-24 14:59 ` [lm-sensors] [PATCHv2] hwmon: lis3: Short explanations of Éric Piel
2010-10-22 20:08 ` [PATCH 00/12] lis3 accelerator feature update Guenter Roeck
2010-10-22 20:08 ` Guenter Roeck
2010-10-22 20:08 ` [lm-sensors] " Guenter Roeck
2010-10-22 23:44 ` Éric Piel
2010-10-22 23:44 ` [lm-sensors] " Éric Piel
[not found] ` <4CC221F0.5040608-VkQ1JFuSMpfAbQlEx87xDw@public.gmane.org>
2010-10-23 1:05 ` Guenter Roeck
2010-10-23 1:05 ` Guenter Roeck
2010-10-23 1:05 ` [lm-sensors] " Guenter Roeck
2010-10-24 15:05 ` Éric Piel [this message]
2010-10-24 15:05 ` Éric Piel
2010-10-24 15:05 ` [lm-sensors] " Éric Piel
[not found] ` <4CC44B3D.5030404-VkQ1JFuSMpfAbQlEx87xDw@public.gmane.org>
2010-10-24 15:35 ` Guenter Roeck
2010-10-24 15:35 ` Guenter Roeck
2010-10-24 15:35 ` [lm-sensors] " Guenter Roeck
[not found] ` <20101024153548.GA14303-IzeFyvvaP7pWk0Htik3J/w@public.gmane.org>
2010-10-24 16:35 ` Guenter Roeck
2010-10-24 16:35 ` Guenter Roeck
2010-10-24 16:35 ` Guenter Roeck
[not found] ` <20101024163529.GA14650-IzeFyvvaP7pWk0Htik3J/w@public.gmane.org>
2010-10-24 17:01 ` Guenter Roeck
2010-10-24 17:01 ` Guenter Roeck
2010-10-24 17:01 ` Guenter Roeck
2010-10-25 6:10 ` samu.p.onkalo-xNZwKgViW5gAvxtiuMwx3w
2010-10-25 6:10 ` samu.p.onkalo
2010-10-25 6:10 ` [lm-sensors] " samu.p.onkalo
2010-10-22 11:57 ` [PATCH 12/12] hwmon: lis3: Release resources is case of failure Samu Onkalo
2010-10-22 11:57 ` Samu Onkalo
2010-10-22 11:57 ` [lm-sensors] [PATCH 12/12] hwmon: lis3: Release resources is case Samu Onkalo
[not found] ` <1287748654-2626-13-git-send-email-samu.p.onkalo-xNZwKgViW5gAvxtiuMwx3w@public.gmane.org>
2010-10-24 14:59 ` [PATCH 12/12] hwmon: lis3: Release resources is case of failure Éric Piel
2010-10-24 14:59 ` Éric Piel
2010-10-24 14:59 ` [lm-sensors] [PATCH 12/12] hwmon: lis3: Release resources is Éric Piel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4CC44B3D.5030404@tremplin-utc.net \
--to=eric.piel-vkq1jfusmpfabqlex87xdw@public.gmane.org \
--cc=guenter.roeck-IzeFyvvaP7pWk0Htik3J/w@public.gmane.org \
--cc=jic23-KWPb1pKIrIJaa/9Udqfwiw@public.gmane.org \
--cc=khali-PUYAD+kWke1g9hUCZPvPmw@public.gmane.org \
--cc=linux-i2c-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=lm-sensors-GZX6beZjE8VD60Wz+7aTrA@public.gmane.org \
--cc=samu.p.onkalo-xNZwKgViW5gAvxtiuMwx3w@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.