* Error: git was compiled without libcurl support
@ 2010-11-17 13:22 Marco Cavallini
2010-11-17 14:01 ` Frans Meulenbroeks
0 siblings, 1 reply; 9+ messages in thread
From: Marco Cavallini @ 2010-11-17 13:22 UTC (permalink / raw)
To: Openembedded-devel
Hi, I just tried installing OE retrieving it from git
git clone git://git.openembedded.org/openembedded
bitbake version 1.10.0
branch master
MACHINE=akita time bitbake minimal-image
DISTRO = "angstrom-2008.1"
host machine : Debian lenny x86_64-linux
I face to an unexpected error
"Error: git was compiled without libcurl support"
I successfully built it until November 2nd but since last Saturday I
wonder if it should build or if is normal this behavoiur.
log: http://paste.ubuntu.com/533450/
TIA
/marco
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: Error: git was compiled without libcurl support
2010-11-17 13:22 Error: git was compiled without libcurl support Marco Cavallini
@ 2010-11-17 14:01 ` Frans Meulenbroeks
2010-11-17 15:05 ` Marco Cavallini
0 siblings, 1 reply; 9+ messages in thread
From: Frans Meulenbroeks @ 2010-11-17 14:01 UTC (permalink / raw)
To: openembedded-devel
2010/11/17 Marco Cavallini <koansoftware@gmail.com>:
> Hi, I just tried installing OE retrieving it from git
> git clone git://git.openembedded.org/openembedded
>
> bitbake version 1.10.0
> branch master
> MACHINE=akita time bitbake minimal-image
> DISTRO = "angstrom-2008.1"
> host machine : Debian lenny x86_64-linux
>
> I face to an unexpected error
> "Error: git was compiled without libcurl support"
>
> I successfully built it until November 2nd but since last Saturday I
> wonder if it should build or if is normal this behavoiur.
> log: http://paste.ubuntu.com/533450/
>
you're using git from the host, guess that got changed one way or another.
Frans
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: Error: git was compiled without libcurl support
2010-11-17 14:01 ` Frans Meulenbroeks
@ 2010-11-17 15:05 ` Marco Cavallini
2010-11-17 19:30 ` Khem Raj
0 siblings, 1 reply; 9+ messages in thread
From: Marco Cavallini @ 2010-11-17 15:05 UTC (permalink / raw)
To: openembedded-devel
Frans Meulenbroeks ha scritto, Il 17/11/2010 15:01:
> 2010/11/17 Marco Cavallini <koansoftware@gmail.com>:
>> Hi, I just tried installing OE retrieving it from git
>> git clone git://git.openembedded.org/openembedded
>>
>> bitbake version 1.10.0
>> branch master
>> MACHINE=akita time bitbake minimal-image
>> DISTRO = "angstrom-2008.1"
>> host machine : Debian lenny x86_64-linux
>>
>> I face to an unexpected error
>> "Error: git was compiled without libcurl support"
>>
>> I successfully built it until November 2nd but since last Saturday I
>> wonder if it should build or if is normal this behavoiur.
>> log: http://paste.ubuntu.com/533450/
>>
>
> you're using git from the host, guess that got changed one way or another.
>
Frans,
thank you for answering.
I tried removing ASSUME_PROVIDED git-native from my config (local.conf)
in this case bitbake create git and use it instead of the host provided.
Then I did
bitbake -b git-native
Anyway there are errors again
http://tinderbox.openembedded.net/packages/985559/
Is anybody out there building with Debian Lenny 64 ?
TIA
/marco
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: Error: git was compiled without libcurl support
2010-11-17 15:05 ` Marco Cavallini
@ 2010-11-17 19:30 ` Khem Raj
2010-11-17 19:41 ` Tom Rini
0 siblings, 1 reply; 9+ messages in thread
From: Khem Raj @ 2010-11-17 19:30 UTC (permalink / raw)
To: openembedded-devel
On Wed, Nov 17, 2010 at 7:05 AM, Marco Cavallini <koansoftware@gmail.com> wrote:
> Frans Meulenbroeks ha scritto, Il 17/11/2010 15:01:
>> 2010/11/17 Marco Cavallini <koansoftware@gmail.com>:
>>> Hi, I just tried installing OE retrieving it from git
>>> git clone git://git.openembedded.org/openembedded
>>>
>>> bitbake version 1.10.0
>>> branch master
>>> MACHINE=akita time bitbake minimal-image
>>> DISTRO = "angstrom-2008.1"
>>> host machine : Debian lenny x86_64-linux
>>>
>>> I face to an unexpected error
>>> "Error: git was compiled without libcurl support"
>>>
>>> I successfully built it until November 2nd but since last Saturday I
>>> wonder if it should build or if is normal this behavoiur.
>>> log: http://paste.ubuntu.com/533450/
>>>
>>
>> you're using git from the host, guess that got changed one way or another.
>>
>
> Frans,
> thank you for answering.
>
> I tried removing ASSUME_PROVIDED git-native from my config (local.conf)
> in this case bitbake create git and use it instead of the host provided.
> Then I did
>
> bitbake -b git-native
>
> Anyway there are errors again
> http://tinderbox.openembedded.net/packages/985559/
>
can you post your local.conf and additionally what version of autoconf
is installed on your build host.
>
> Is anybody out there building with Debian Lenny 64 ?
> TIA
>
> /marco
>
> _______________________________________________
> Openembedded-devel mailing list
> Openembedded-devel@lists.openembedded.org
> http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel
>
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: Error: git was compiled without libcurl support
2010-11-17 19:30 ` Khem Raj
@ 2010-11-17 19:41 ` Tom Rini
2010-11-18 9:04 ` Marco Cavallini
0 siblings, 1 reply; 9+ messages in thread
From: Tom Rini @ 2010-11-17 19:41 UTC (permalink / raw)
To: openembedded-devel
On 11/17/2010 12:30 PM, Khem Raj wrote:
> On Wed, Nov 17, 2010 at 7:05 AM, Marco Cavallini<koansoftware@gmail.com> wrote:
>> Frans Meulenbroeks ha scritto, Il 17/11/2010 15:01:
>>> 2010/11/17 Marco Cavallini<koansoftware@gmail.com>:
>>>> Hi, I just tried installing OE retrieving it from git
>>>> git clone git://git.openembedded.org/openembedded
>>>>
>>>> bitbake version 1.10.0
>>>> branch master
>>>> MACHINE=akita time bitbake minimal-image
>>>> DISTRO = "angstrom-2008.1"
>>>> host machine : Debian lenny x86_64-linux
>>>>
>>>> I face to an unexpected error
>>>> "Error: git was compiled without libcurl support"
>>>>
>>>> I successfully built it until November 2nd but since last Saturday I
>>>> wonder if it should build or if is normal this behavoiur.
>>>> log: http://paste.ubuntu.com/533450/
>>>>
>>>
>>> you're using git from the host, guess that got changed one way or another.
>>>
>>
>> Frans,
>> thank you for answering.
>>
>> I tried removing ASSUME_PROVIDED git-native from my config (local.conf)
>> in this case bitbake create git and use it instead of the host provided.
>> Then I did
>>
>> bitbake -b git-native
>>
>> Anyway there are errors again
>> http://tinderbox.openembedded.net/packages/985559/
>>
> can you post your local.conf and additionally what version of autoconf
> is installed on your build host.
On IRC we confirm that debian/lenny (on 64bit) has a git bug atm.
--
Tom Rini
Mentor Graphics Corporation
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: Error: git was compiled without libcurl support
2010-11-17 19:41 ` Tom Rini
@ 2010-11-18 9:04 ` Marco Cavallini
2010-11-18 18:30 ` Khem Raj
0 siblings, 1 reply; 9+ messages in thread
From: Marco Cavallini @ 2010-11-18 9:04 UTC (permalink / raw)
To: openembedded-devel
Tom Rini ha scritto, Il 17/11/2010 20:41:
> On 11/17/2010 12:30 PM, Khem Raj wrote:
>> On Wed, Nov 17, 2010 at 7:05 AM, Marco
>> Cavallini<koansoftware@gmail.com> wrote:
>>> Frans Meulenbroeks ha scritto, Il 17/11/2010 15:01:
>>>> 2010/11/17 Marco Cavallini<koansoftware@gmail.com>:
>>>>> Hi, I just tried installing OE retrieving it from git
>>>>> git clone git://git.openembedded.org/openembedded
>>>>>
>>>>> bitbake version 1.10.0
>>>>> branch master
>>>>> MACHINE=akita time bitbake minimal-image
>>>>> DISTRO = "angstrom-2008.1"
>>>>> host machine : Debian lenny x86_64-linux
>>>>>
>>>>> I face to an unexpected error
>>>>> "Error: git was compiled without libcurl support"
>>>>>
>>>>> I successfully built it until November 2nd but since last Saturday I
>>>>> wonder if it should build or if is normal this behavoiur.
>>>>> log: http://paste.ubuntu.com/533450/
>>>>>
>>>>
>>>> you're using git from the host, guess that got changed one way or
>>>> another.
>>>>
>>>
>>> Frans,
>>> thank you for answering.
>>>
>>> I tried removing ASSUME_PROVIDED git-native from my config (local.conf)
>>> in this case bitbake create git and use it instead of the host provided.
>>> Then I did
>>>
>>> bitbake -b git-native
>>>
>>> Anyway there are errors again
>>> http://tinderbox.openembedded.net/packages/985559/
>>>
>> can you post your local.conf and additionally what version of autoconf
>> is installed on your build host.
>
> On IRC we confirm that debian/lenny (on 64bit) has a git bug atm.
>
Here is my workaround, if you are using Debian Lenny as host distro
please read this carefully
http://www.kaeilos.com/debian-lenny-and-git-native
Suggestions would be appreciated.
HTH
Cordiali Saluti / Kindest Regards / mit freundlichen Grüssen
--
Marco Cavallini | KOAN sas | Bergamo - Italia
embedded and real-time software engineering
Atmel third party certified consultant
Phone:+39-035-255.235 - Fax:+39-178-22.39.748
http://www.KoanSoftware.com
http://www.KaeilOS.com
^ permalink raw reply [flat|nested] 9+ messages in thread* Re: Error: git was compiled without libcurl support
2010-11-18 9:04 ` Marco Cavallini
@ 2010-11-18 18:30 ` Khem Raj
2010-11-18 18:43 ` git-native: fails with `/usr/bin/autoreconf: unrecognized option `--exclude=autopoint'` (was: Error: git was compiled without libcurl support) Paul Menzel
2010-11-20 10:15 ` Error: git was compiled without libcurl support Marco Cavallini
0 siblings, 2 replies; 9+ messages in thread
From: Khem Raj @ 2010-11-18 18:30 UTC (permalink / raw)
To: openembedded-devel
On Thu, Nov 18, 2010 at 1:04 AM, Marco Cavallini <koansoftware@gmail.com> wrote:
> Tom Rini ha scritto, Il 17/11/2010 20:41:
>> On 11/17/2010 12:30 PM, Khem Raj wrote:
>>> On Wed, Nov 17, 2010 at 7:05 AM, Marco
>>> Cavallini<koansoftware@gmail.com> wrote:
>>>> Frans Meulenbroeks ha scritto, Il 17/11/2010 15:01:
>>>>> 2010/11/17 Marco Cavallini<koansoftware@gmail.com>:
>>>>>> Hi, I just tried installing OE retrieving it from git
>>>>>> git clone git://git.openembedded.org/openembedded
>>>>>>
>>>>>> bitbake version 1.10.0
>>>>>> branch master
>>>>>> MACHINE=akita time bitbake minimal-image
>>>>>> DISTRO = "angstrom-2008.1"
>>>>>> host machine : Debian lenny x86_64-linux
>>>>>>
>>>>>> I face to an unexpected error
>>>>>> "Error: git was compiled without libcurl support"
>>>>>>
>>>>>> I successfully built it until November 2nd but since last Saturday I
>>>>>> wonder if it should build or if is normal this behavoiur.
>>>>>> log: http://paste.ubuntu.com/533450/
>>>>>>
>>>>>
>>>>> you're using git from the host, guess that got changed one way or
>>>>> another.
>>>>>
>>>>
>>>> Frans,
>>>> thank you for answering.
>>>>
>>>> I tried removing ASSUME_PROVIDED git-native from my config (local.conf)
>>>> in this case bitbake create git and use it instead of the host provided.
>>>> Then I did
>>>>
>>>> bitbake -b git-native
>>>>
>>>> Anyway there are errors again
>>>> http://tinderbox.openembedded.net/packages/985559/
>>>>
>>> can you post your local.conf and additionally what version of autoconf
>>> is installed on your build host.
>>
>> On IRC we confirm that debian/lenny (on 64bit) has a git bug atm.
>>
>
> Here is my workaround, if you are using Debian Lenny as host distro
> please read this carefully
> http://www.kaeilos.com/debian-lenny-and-git-native
>
> Suggestions would be appreciated.
why not just use git-native ?
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: git-native: fails with `/usr/bin/autoreconf: unrecognized option `--exclude=autopoint'` (was: Error: git was compiled without libcurl support)
2010-11-18 18:30 ` Khem Raj
@ 2010-11-18 18:43 ` Paul Menzel
2010-11-20 10:15 ` Error: git was compiled without libcurl support Marco Cavallini
1 sibling, 0 replies; 9+ messages in thread
From: Paul Menzel @ 2010-11-18 18:43 UTC (permalink / raw)
To: openembedded-devel
[-- Attachment #1: Type: text/plain, Size: 1302 bytes --]
Am Donnerstag, den 18.11.2010, 10:30 -0800 schrieb Khem Raj:
> On Thu, Nov 18, 2010 at 1:04 AM, Marco Cavallini <koansoftware@gmail.com> wrote:
> > Tom Rini ha scritto, Il 17/11/2010 20:41:
> >> On 11/17/2010 12:30 PM, Khem Raj wrote:
> >>> On Wed, Nov 17, 2010 at 7:05 AM, Marco Cavallini wrote:
[…]
> >>>> I tried removing ASSUME_PROVIDED git-native from my config (local.conf)
> >>>> in this case bitbake create git and use it instead of the host provided.
> >>>> Then I did
> >>>>
> >>>> bitbake -b git-native
> >>>>
> >>>> Anyway there are errors again
> >>>> http://tinderbox.openembedded.net/packages/985559/
> >>>>
> >>> can you post your local.conf and additionally what version of autoconf
> >>> is installed on your build host.
> >>
> >> On IRC we confirm that debian/lenny (on 64bit) has a git bug atm.
> >>
> >
> > Here is my workaround, if you are using Debian Lenny as host distro
> > please read this carefully
> > http://www.kaeilos.com/debian-lenny-and-git-native
> >
> > Suggestions would be appreciated.
>
> why not just use git-native ?
As Marco wrote four messages before, it fails for him [1]. I guess you
still need the version of `autoconf`.
Thanks,
Paul
[1] http://tinderbox.openembedded.net/public/logs/task/10259740.txt
[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 205 bytes --]
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: Error: git was compiled without libcurl support
2010-11-18 18:30 ` Khem Raj
2010-11-18 18:43 ` git-native: fails with `/usr/bin/autoreconf: unrecognized option `--exclude=autopoint'` (was: Error: git was compiled without libcurl support) Paul Menzel
@ 2010-11-20 10:15 ` Marco Cavallini
1 sibling, 0 replies; 9+ messages in thread
From: Marco Cavallini @ 2010-11-20 10:15 UTC (permalink / raw)
To: openembedded-devel
Khem Raj ha scritto, Il 18/11/2010 19:30:
>> Suggestions would be appreciated.
>
> why not just use git-native ?
>
Due to another error
http://tinderbox.openembedded.net/public/logs/task/10259740.txt
Yes with Debian Lenny and Debian git native because git version is too
old (git-1.6.3.3), and you should face to the following error:
error: git was compiled without libcurl support
I solved it with this workaround (updated)
http://www.kaeilos.com/debian-lenny-and-git-native
HTH
Cordiali Saluti / Kindest Regards / mit freundlichen Grüssen
--
Marco Cavallini | KOAN sas | Bergamo - Italia
embedded and real-time software engineering
Atmel third party certified consultant
Phone:+39-035-255.235 - Fax:+39-178-22.39.748
http://www.KoanSoftware.com
http://www.KaeilOS.com
^ permalink raw reply [flat|nested] 9+ messages in thread
end of thread, other threads:[~2010-11-20 10:17 UTC | newest]
Thread overview: 9+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2010-11-17 13:22 Error: git was compiled without libcurl support Marco Cavallini
2010-11-17 14:01 ` Frans Meulenbroeks
2010-11-17 15:05 ` Marco Cavallini
2010-11-17 19:30 ` Khem Raj
2010-11-17 19:41 ` Tom Rini
2010-11-18 9:04 ` Marco Cavallini
2010-11-18 18:30 ` Khem Raj
2010-11-18 18:43 ` git-native: fails with `/usr/bin/autoreconf: unrecognized option `--exclude=autopoint'` (was: Error: git was compiled without libcurl support) Paul Menzel
2010-11-20 10:15 ` Error: git was compiled without libcurl support Marco Cavallini
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.