All of lore.kernel.org
 help / color / mirror / Atom feed
From: Eric Sandeen <sandeen@sandeen.net>
To: Christoph Hellwig <hch@infradead.org>
Cc: Marius Tolzmann <tolzmann@molgen.mpg.de>, xfs@oss.sgi.com
Subject: Re: [PATCH] xfstests: check block truncation after write failure
Date: Fri, 19 Nov 2010 08:53:05 -0600	[thread overview]
Message-ID: <4CE68F51.9000207@sandeen.net> (raw)
In-Reply-To: <20101110125500.GA9828@infradead.org>

On 11/10/10 6:55 AM, Christoph Hellwig wrote:
> Below is a version using od.  The output in case of failure is not
> quite as easily readable as the original, but in the end portability
> wins:
> 
> ---
> From: Christoph Hellwig <hch@lst.de>
> Subject: [PATCH] xfstests: check block truncation after write failure
> Cc: Marius Tolzmann <tolzmann@molgen.mpg.de>
> 
> Extraced from  https://bugzilla.kernel.org/show_bug.cgi?id=22452
> "data corruption after mmap()ing a file and writev() some data to another file"
> 
> Signed-off-by: Christoph Hellwig <hch@lst.de>

On top of Dave's review of the original, the change to od looks fine:

Reviewed-by: Eric Sandeen <sandeen@sandeen.net>

> Index: xfstests-dev/246
> ===================================================================
> --- /dev/null	1970-01-01 00:00:00.000000000 +0000
> +++ xfstests-dev/246	2010-11-10 12:50:10.000000000 +0000
> @@ -0,0 +1,60 @@
> +#! /bin/bash
> +# FS QA Test No. 246
> +#
> +# Check that truncation after failed writes does not zero too much data.
> +#
> +# Based on a bug report and testcase from
> +# Marius Tolzmann <tolzmann@molgen.mpg.de>
> +#
> +#-----------------------------------------------------------------------
> +# Copyright (c) 2010 Christoph Hellwig.  All Rights Reserved.
> +#
> +# This program is free software; you can redistribute it and/or
> +# modify it under the terms of the GNU General Public License as
> +# published by the Free Software Foundation.
> +#
> +# This program is distributed in the hope that it would be useful,
> +# but WITHOUT ANY WARRANTY; without even the implied warranty of
> +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> +# GNU General Public License for more details.
> +#
> +# You should have received a copy of the GNU General Public License
> +# along with this program; if not, write the Free Software Foundation,
> +# Inc.,  51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
> +#
> +#-----------------------------------------------------------------------
> +#
> +# creator
> +owner=hch@lst.de
> +
> +seq=`basename $0`
> +echo "QA output created by $seq"
> +
> +here=`pwd`
> +tmp=/tmp/$$
> +status=1	# failure is the default!
> +
> +# get standard environment, filters and checks
> +. ./common.rc
> +. ./common.filter
> +
> +# real QA test starts here
> +_supported_fs generic
> +_supported_os Linux
> +
> +file=$TEST_DIR/mmap-writev
> +
> +_cleanup()
> +{
> +	rm -rf $file
> +	rm -rf $file.NEW
> +}
> +
> +trap "_cleanup ; exit \$status" 0 1 2 3 15
> +
> +echo -n "cccccccccc" > $file
> +$here/src/t_mmap_writev $file $file.NEW
> +od -t x2 $file.NEW
> +
> +status=0
> +exit $status
> Index: xfstests-dev/246.out
> ===================================================================
> --- /dev/null	1970-01-01 00:00:00.000000000 +0000
> +++ xfstests-dev/246.out	2010-11-10 12:50:30.000000000 +0000
> @@ -0,0 +1,4 @@
> +QA output created by 246
> +0000000 6161 6161 6161 6161 6161 6262 6262 6262
> +0000020 6262 6262 6363 6363 6363 6363 6363
> +0000036
> Index: xfstests-dev/group
> ===================================================================
> --- xfstests-dev.orig/group	2010-11-10 12:40:29.000000000 +0000
> +++ xfstests-dev/group	2010-11-10 12:40:40.000000000 +0000
> @@ -359,3 +359,4 @@ deprecated
>  243 auto quick prealloc
>  244 auto quota quick
>  245 auto quick dir
> +246 auto quick rw
> Index: xfstests-dev/src/Makefile
> ===================================================================
> --- xfstests-dev.orig/src/Makefile	2010-11-10 12:39:26.000000000 +0000
> +++ xfstests-dev/src/Makefile	2010-11-10 12:40:40.000000000 +0000
> @@ -10,7 +10,8 @@ TARGETS = dirstress fill fill2 getpagesi
>  	mmapcat append_reader append_writer dirperf metaperf \
>  	devzero feature alloc fault fstest t_access_root \
>  	godown resvtest writemod makeextents itrash rename \
> -	multi_open_unlink dmiperf unwritten_sync genhashnames t_holes
> +	multi_open_unlink dmiperf unwritten_sync genhashnames t_holes \
> +	t_mmap_writev
>  
>  LINUX_TARGETS = xfsctl bstat t_mtab getdevicesize preallo_rw_pattern_reader \
>  	preallo_rw_pattern_writer ftrunc trunc fs_perms testx looptest \
> Index: xfstests-dev/src/t_mmap_writev.c
> ===================================================================
> --- /dev/null	1970-01-01 00:00:00.000000000 +0000
> +++ xfstests-dev/src/t_mmap_writev.c	2010-11-10 12:40:40.000000000 +0000
> @@ -0,0 +1,70 @@
> +/*
> +    mmap() a file and writev() back to another file
> +         - kernel bug #22452 testcase
> +
> +    Copyright (C) 2010
> +         by D.Buczek - Max Planck Institute for Molecular Genetics Berlin
> +
> +    This program is free software; you can redistribute it and/or modify
> +    it under the terms of the GNU General Public License as published by
> +    the Free Software Foundation; either version 2 of the License, or
> +    (at your option) any later version.
> +
> +    This program is distributed in the hope that it will be useful,
> +    but WITHOUT ANY WARRANTY; without even the implied warranty of
> +    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> +    GNU General Public License for more details.
> +
> +    You should have received a copy of the GNU General Public License along
> +    with this program; if not, write to the Free Software Foundation, Inc.,
> +    51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
> +*/
> +
> +#include <sys/types.h>
> +#include <fcntl.h>
> +#include <stdio.h>
> +#include <stdlib.h>
> +
> +#include <sys/mman.h>
> +#include <string.h>
> +#include <sys/uio.h>
> +#include <unistd.h>
> +
> +int main(int argc, char **argv)
> +{
> +	char *file = argv[1];
> +	char *new_file = argv[2];
> +	int fd;
> +	int fd_new;
> +	void *base;
> +
> +	struct iovec iovec[3]=
> +	{
> +		{ "aaaaaaaaaa" , 10 },
> +		{ "bbbbbbbbbb" , 10 },
> +	 	{ NULL , 10 }
> +	};
> +
> +	int i;
> +
> +	fd=open(file, O_RDONLY);
> +	if (fd==-1) {perror("open");exit(1);}
> +
> +	base = mmap(NULL,16384,PROT_READ,MAP_SHARED,fd,0);
> +	if  (base == (void *)-1) { perror("mmap");exit(1); }
> +
> +	unlink(new_file);
> +
> +	fd_new=open(new_file,O_RDWR|O_CREAT,0666);
> +	if (fd_new==-1) {perror("creat");exit(1);}
> +
> +	iovec[2].iov_base=(char *)base;
> +	i=writev(fd_new,iovec,sizeof(iovec)/sizeof(*iovec));
> +	if (i==-1) {perror("writev");exit(1);}
> +
> +	close(fd_new);
> +	munmap(base,16384);
> +	close(fd);
> +
> +	return 0;
> +}
> 
> _______________________________________________
> xfs mailing list
> xfs@oss.sgi.com
> http://oss.sgi.com/mailman/listinfo/xfs
> 

_______________________________________________
xfs mailing list
xfs@oss.sgi.com
http://oss.sgi.com/mailman/listinfo/xfs

      parent reply	other threads:[~2010-11-19 14:51 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2010-11-09 11:49 [PATCH] xfstests: check block truncation after write failure Christoph Hellwig
2010-11-09 22:34 ` Dave Chinner
2010-11-10 12:55   ` Christoph Hellwig
2010-11-17  9:17     ` Christoph Hellwig
2010-11-19 14:53     ` Eric Sandeen [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4CE68F51.9000207@sandeen.net \
    --to=sandeen@sandeen.net \
    --cc=hch@infradead.org \
    --cc=tolzmann@molgen.mpg.de \
    --cc=xfs@oss.sgi.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.