qwt 5.2.1 failed to build here (om-gta02 , SHR, X11)

qwt 5.2.1 failed to build here (om-gta02 , SHR, X11)

[Sylvain Paré]

http://tinderbox.openembedded.org/packages/1087355/

Does some one else has already succeded to build qwt 5.2.1 for X11 ?

Any hint, thanks.

Sylvain (aka GarthPS)

Re: qwt 5.2.1 failed to build here (om-gta02 , SHR, X11)

[Eric Bénard]

Hi,

On 25/11/2010 10:53, Sylvain Paré wrote:
> http://tinderbox.openembedded.org/packages/1087355/
>
> Does some one else has already succeded to build qwt 5.2.1 for X11 ?
>
only compile tested (angstrom-2010.x, armv6, oe head & bitbake parallel-parsing) :
NOTE: package qwt-5.2.1-r0: task do_compile: Succeeded
.../...
NOTE: package qwt-5.2.1-r0: task do_rm_work_all: Succeeded

Eric

Re: qwt 5.2.1 failed to build here (om-gta02 , SHR, X11)

[Sylvain Paré]

ok thanks. does some one has a clue ?
extracted for the log :

Fatal error: can't create obj/qwt_abstract_scale_draw.o: No such file
or directory



2010/11/25 Eric Bénard <eric@eukrea.com>

> Hi,
>
> On 25/11/2010 10:53, Sylvain Paré wrote:
>
>> http://tinderbox.openembedded.org/packages/1087355/
>>
>> Does some one else has already succeded to build qwt 5.2.1 for X11 ?
>>
>>  only compile tested (angstrom-2010.x, armv6, oe head & bitbake
> parallel-parsing) :
> NOTE: package qwt-5.2.1-r0: task do_compile: Succeeded
> .../...
> NOTE: package qwt-5.2.1-r0: task do_rm_work_all: Succeeded
>
> Eric
>
> _______________________________________________
> Openembedded-devel mailing list
> Openembedded-devel@lists.openembedded.org
> http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel
>

Re: qwt 5.2.1 failed to build here (om-gta02 , SHR, X11)

[Eric Bénard]

On 25/11/2010 11:10, Sylvain Paré wrote:
> ok thanks. does some one has a clue ?
> extracted for the log :
>
> Fatal error: can't create obj/qwt_abstract_scale_draw.o: No such file
> or directory
>
does the obj directory exist ?

Eric

Re: qwt 5.2.1 failed to build here (om-gta02 , SHR, X11)

[Sylvain Paré]

I can't find any obj/ directory in
SHR-Build/shr-unstable/tmp/work/armv4t-oe-linux-gnueabi/qwt-5.2.1-r0/qwt-5.2.1/
but I have an
SHR-Build/shr-unstable/tmp/work/armv4t-oe-linux-gnueabi/qwt-5.2.1-r0/qwt-5.2.1/src/obj${QT_LIBINFIX}/


2010/11/25 Eric Bénard <eric@eukrea.com>

> On 25/11/2010 11:10, Sylvain Paré wrote:
>
>> ok thanks. does some one has a clue ?
>> extracted for the log :
>>
>> Fatal error: can't create obj/qwt_abstract_scale_draw.o: No such file
>> or directory
>>
>>  does the obj directory exist ?
>
> Eric
>
>
> _______________________________________________
> Openembedded-devel mailing list
> Openembedded-devel@lists.openembedded.org
> http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel
>

Re: qwt 5.2.1 failed to build here (om-gta02 , SHR, X11)

[Eric Bénard]

On 25/11/2010 12:12, Sylvain Paré wrote:
> I can't find any obj/ directory in
> SHR-Build/shr-unstable/tmp/work/armv4t-oe-linux-gnueabi/qwt-5.2.1-r0/qwt-5.2.1/
> but I have an
> SHR-Build/shr-unstable/tmp/work/armv4t-oe-linux-gnueabi/qwt-5.2.1-r0/qwt-5.2.1/src/obj${QT_LIBINFIX}/
>
here is your problem.
QT_LIBINFIX should be "" in your case.

Eric

Re: qwt 5.2.1 failed to build here (om-gta02 , SHR, X11)

[Martin Jansa]

On Thu, Nov 25, 2010 at 12:38:33PM +0100, Eric Bénard wrote:
> On 25/11/2010 12:12, Sylvain Paré wrote:
> > I can't find any obj/ directory in
> > SHR-Build/shr-unstable/tmp/work/armv4t-oe-linux-gnueabi/qwt-5.2.1-r0/qwt-5.2.1/
> > but I have an
> > SHR-Build/shr-unstable/tmp/work/armv4t-oe-linux-gnueabi/qwt-5.2.1-r0/qwt-5.2.1/src/obj${QT_LIBINFIX}/
> >
> here is your problem.
> QT_LIBINFIX should be "" in your case.

then something like
QT_DIR_NAME = "qt4"
QT_LIBINFIX = ""

is missing in qt4x11.bbclass (it's defined only in qt4e.bbclass).

-- 
Martin 'JaMa' Jansa     jabber: Martin.Jansa@gmail.com

Re: qwt 5.2.1 failed to build here (om-gta02 , SHR, X11)

[Sylvain Paré]

I don't have acces to OE.
Eric can you do that please ?


2010/11/25 Martin Jansa <martin.jansa@gmail.com>

> On Thu, Nov 25, 2010 at 12:38:33PM +0100, Eric Bénard wrote:
> > On 25/11/2010 12:12, Sylvain Paré wrote:
> > > I can't find any obj/ directory in
> > >
> SHR-Build/shr-unstable/tmp/work/armv4t-oe-linux-gnueabi/qwt-5.2.1-r0/qwt-5.2.1/
> > > but I have an
> > >
> SHR-Build/shr-unstable/tmp/work/armv4t-oe-linux-gnueabi/qwt-5.2.1-r0/qwt-5.2.1/src/obj${QT_LIBINFIX}/
> > >
> > here is your problem.
> > QT_LIBINFIX should be "" in your case.
>
> then something like
> QT_DIR_NAME = "qt4"
> QT_LIBINFIX = ""
>
> is missing in qt4x11.bbclass (it's defined only in qt4e.bbclass).
>
> --
> Martin 'JaMa' Jansa     jabber: Martin.Jansa@gmail.com
>
> _______________________________________________
> Openembedded-devel mailing list
> Openembedded-devel@lists.openembedded.org
> http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel
>

[PATCH] qt4x11: set QT_LIBINFIX and QT_DIR_NAME

[Eric Bénard]

this will fix the following issue with qwt 5.2.1 where obj dir is:
work/armv4t-oe-linux-gnueabi/qwt-5.2.1-r0/qwt-5.2.1/src/obj${QT_LIBINFIX}/
instead of :
work/armv4t-oe-linux-gnueabi/qwt-5.2.1-r0/qwt-5.2.1/src/obj/

From: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Eric Bénard <eric@eukrea.com>
---
 classes/qt4x11.bbclass |    3 +++
 1 files changed, 3 insertions(+), 0 deletions(-)

diff --git a/classes/qt4x11.bbclass b/classes/qt4x11.bbclass
index 2d56b7e..abb1d9d 100644
--- a/classes/qt4x11.bbclass
+++ b/classes/qt4x11.bbclass
@@ -2,5 +2,8 @@ DEPENDS_prepend = "${@["qt4-x11-free ", ""][(bb.data.getVar('PN', d, 1)[:12] ==
 
 inherit qmake2
 
+QT_DIR_NAME = "qt4"
+QT_LIBINFIX = ""
+
 # Qt4 uses atomic instructions not supported in thumb mode
 ARM_INSTRUCTION_SET = "arm"
-- 
1.6.3.3

Re: [PATCH] qt4x11: set QT_LIBINFIX and QT_DIR_NAME

[Koen Kooi]

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

On 25-11-10 16:54, Eric Bénard wrote:
> this will fix the following issue with qwt 5.2.1 where obj dir is:
> work/armv4t-oe-linux-gnueabi/qwt-5.2.1-r0/qwt-5.2.1/src/obj${QT_LIBINFIX}/
> instead of :
> work/armv4t-oe-linux-gnueabi/qwt-5.2.1-r0/qwt-5.2.1/src/obj/
> 
> From: Martin Jansa <Martin.Jansa@gmail.com>
> Signed-off-by: Eric Bénard <eric@eukrea.com>

Acked-by: Koen Kooi <k-kooi@ti.com>

> ---
>  classes/qt4x11.bbclass |    3 +++
>  1 files changed, 3 insertions(+), 0 deletions(-)
> 
> diff --git a/classes/qt4x11.bbclass b/classes/qt4x11.bbclass
> index 2d56b7e..abb1d9d 100644
> --- a/classes/qt4x11.bbclass
> +++ b/classes/qt4x11.bbclass
> @@ -2,5 +2,8 @@ DEPENDS_prepend = "${@["qt4-x11-free ", ""][(bb.data.getVar('PN', d, 1)[:12] ==
>  
>  inherit qmake2
>  
> +QT_DIR_NAME = "qt4"
> +QT_LIBINFIX = ""
> +
>  # Qt4 uses atomic instructions not supported in thumb mode
>  ARM_INSTRUCTION_SET = "arm"

-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.5 (Darwin)

iD8DBQFM7opNMkyGM64RGpERAqO2AJ9nyr/drAT7t6LPEG1A+QyhVnWEhACgi29X
l9NpDotshYsD4jtyeSSNT8s=
=3G1E
-----END PGP SIGNATURE-----

Re: qwt 5.2.1 failed to build here (om-gta02 , SHR, X11)

[Eric Bénard]

Hi Sylvain,

On 25/11/2010 16:40, Sylvain Paré wrote:
> I don't have acces to OE.
> Eric can you do that please ?
>
can you please test the patch and say if that solves your problem ?

Thanks
Eric

Re: qwt 5.2.1 failed to build here (om-gta02 , SHR, X11)

[Sylvain Paré]

yes I did thoses changes
http://pastebin.com/5x9Gaxm7
and it has build successfully .

2010/11/25 Eric Bénard <eric@eukrea.com>

> Hi Sylvain,
>
>
> On 25/11/2010 16:40, Sylvain Paré wrote:
>
>> I don't have acces to OE.
>> Eric can you do that please ?
>>
>>  can you please test the patch and say if that solves your problem ?
>
> Thanks
> Eric
>
>
> _______________________________________________
> Openembedded-devel mailing list
> Openembedded-devel@lists.openembedded.org
> http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel
>

Re: [PATCH] qt4x11: set QT_LIBINFIX and QT_DIR_NAME

[Khem Raj]

On (25/11/10 16:54), Eric Bénard wrote:
> this will fix the following issue with qwt 5.2.1 where obj dir is:
> work/armv4t-oe-linux-gnueabi/qwt-5.2.1-r0/qwt-5.2.1/src/obj${QT_LIBINFIX}/
> instead of :
> work/armv4t-oe-linux-gnueabi/qwt-5.2.1-r0/qwt-5.2.1/src/obj/
> 
> From: Martin Jansa <Martin.Jansa@gmail.com>
> Signed-off-by: Eric Bénard <eric@eukrea.com>

please install

Acked-by: Khem Raj <raj.khem@gmail.com>
> ---
>  classes/qt4x11.bbclass |    3 +++
>  1 files changed, 3 insertions(+), 0 deletions(-)
> 
> diff --git a/classes/qt4x11.bbclass b/classes/qt4x11.bbclass
> index 2d56b7e..abb1d9d 100644
> --- a/classes/qt4x11.bbclass
> +++ b/classes/qt4x11.bbclass
> @@ -2,5 +2,8 @@ DEPENDS_prepend = "${@["qt4-x11-free ", ""][(bb.data.getVar('PN', d, 1)[:12] ==
>  
>  inherit qmake2
>  
> +QT_DIR_NAME = "qt4"
> +QT_LIBINFIX = ""
> +
>  # Qt4 uses atomic instructions not supported in thumb mode
>  ARM_INSTRUCTION_SET = "arm"
> -- 
> 1.6.3.3
> 
> 
> _______________________________________________
> Openembedded-devel mailing list
> Openembedded-devel@lists.openembedded.org
> http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel

Re: qwt 5.2.1 failed to build here (om-gta02 , SHR, X11)

[Sylvain Paré]

Thx Eric

2010/11/25 Sylvain Paré <sylvain.pare@gmail.com>

> yes I did thoses changes
> http://pastebin.com/5x9Gaxm7
> and it has build successfully .
>
> 2010/11/25 Eric Bénard <eric@eukrea.com>
>
>> Hi Sylvain,
>>
>>
>> On 25/11/2010 16:40, Sylvain Paré wrote:
>>
>>> I don't have acces to OE.
>>> Eric can you do that please ?
>>>
>>>  can you please test the patch and say if that solves your problem ?
>>
>> Thanks
>> Eric
>>
>>
>> _______________________________________________
>> Openembedded-devel mailing list
>> Openembedded-devel@lists.openembedded.org
>> http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel
>>
>
>