From: Mikko Korkalo <mikko@korkalo.fi>
To: linux-scsi@vger.kernel.org
Cc: mikew@google.com
Subject: Re: 2.6.36: Dropped interrupts in ata_piix
Date: Mon, 29 Nov 2010 13:41:29 +0200 [thread overview]
Message-ID: <4CF39169.6010601@korkalo.fi> (raw)
Hi,
I am replying to the message here:
http://www.spinics.net/lists/linux-scsi/msg47723.html
(I just registered to the mailing list, so I manually added the Reply-To
header, hopefully it's correct)
It seems I have very similar symptoms with 2.6.36, I can reproduce them
easily in a live system, I could even grant shell access if necessary.
It didn't happen at all with stock ubuntu 8.04 LTS kernel
(2.6.32-25-generic-pae).
Currently, 1 out of 3 SATA hard drives are suffering from this.
I left a dd command overnight to read the drive contents to /dev/null.
One drive didn't finish while all the other drives finished with normal
speeds.
I have attached dmesg and smartctl messages.
Should I try and revert the mentioned patches, or something else?
Anyone able to provide direct links to these patches, I don't normally
involve in kernel development so I'm kind of new to this.
Here are my logs. SMART doesn't report any errors, but I see a lot of
errors in dmesg.
$ sudo smartctl -a /dev/sdc
smartctl version 5.38 [i686-pc-linux-gnu] Copyright (C) 2002-8 Bruce Allen
Home page is http://smartmontools.sourceforge.net/
=== START OF INFORMATION SECTION ===
Device Model: WDC WD20EADS-00S2B0
Serial Number: WD-WCAVY0359972
Firmware Version: 04.05G04
User Capacity: 2,000,398,934,016 bytes
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: 8
ATA Standard is: Exact ATA specification draft version not indicated
Local Time is: Mon Nov 29 12:18:20 2010 EET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x84) Offline data collection activity
was suspended by an interrupting command from host.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (43200) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 255) minutes.
Conveyance self-test routine
recommended polling time: ( 5) minutes.
SCT capabilities: (0x303f) SCT Status supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0
3 Spin_Up_Time 0x0027 157 133 021 Pre-fail Always - 9108
4 Start_Stop_Count 0x0032 099 099 000 Old_age Always - 1198
5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0
7 Seek_Error_Rate 0x002e 100 253 000 Old_age Always - 0
9 Power_On_Hours 0x0032 085 085 000 Old_age Always - 11337
10 Spin_Retry_Count 0x0032 100 100 000 Old_age Always - 0
11 Calibration_Retry_Count 0x0032 100 253 000 Old_age Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 58
192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 22
193 Load_Cycle_Count 0x0032 172 172 000 Old_age Always - 86640
194 Temperature_Celsius 0x0022 109 095 000 Old_age Always - 43
196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0
197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0030 200 200 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 1279
200 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age Offline - 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 5200 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
$ dmesg|tail -30
[51214.053097] ata4.00: failed command: READ DMA EXT
[51214.055504] ata4.00: cmd 25/00:00:bf:0d:38/00:02:94:00:00/e0 tag 0 dma 262144 in
[51214.055507] res 40/00:00:00:00:00/84:01:09:00:00/00 Emask 0x24 (host bus error)
[51214.060435] ata4.00: status: { DRDY }
[51214.062824] ata4: soft resetting link
[51214.339049] ata4.00: configured for UDMA/33
[51214.339059] ata4.00: device reported invalid CHS sector 0
[51214.339117] ata4: EH complete
[51253.024028] ata4: lost interrupt (Status 0x51)
[51253.024050] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[51253.026504] ata4.00: BMDMA stat 0x26, BMDMA stat 0x0, BMDMA stat 0x0, BMDMA stat 0x0, BMDMA stat 0x0
[51253.029131] ata4.00: failed command: READ DMA EXT
[51253.031523] ata4.00: cmd 25/00:00:bf:49:38/00:01:94:00:00/e0 tag 0 dma 131072 in
[51253.031526] res 40/00:00:00:00:00/84:01:09:00:00/00 Emask 0x24 (host bus error)
[51253.036463] ata4.00: status: { DRDY }
[51253.038863] ata4: soft resetting link
[51253.339048] ata4.00: configured for UDMA/33
[51253.339055] ata4.00: device reported invalid CHS sector 0
[51253.339066] ata4: EH complete
[51288.008028] ata4: lost interrupt (Status 0x51)
[51288.008050] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[51288.010468] ata4.00: BMDMA stat 0x26, BMDMA stat 0x0, BMDMA stat 0x0, BMDMA stat 0x0, BMDMA stat 0x0
[51288.013096] ata4.00: failed command: READ DMA EXT
[51288.015506] ata4.00: cmd 25/00:00:bf:5f:38/00:01:94:00:00/e0 tag 0 dma 131072 in
[51288.015509] res 40/00:00:00:00:00/84:01:09:00:00/00 Emask 0x24 (host bus error)
[51288.020517] ata4.00: status: { DRDY }
[51288.022906] ata4: soft resetting link
[51288.339041] ata4.00: configured for UDMA/33
[51288.339049] ata4.00: device reported invalid CHS sector 0
[51288.339059] ata4: EH complete
My kernel is stock except for BFS scheduler patches. I don't see how that could cause this.
Best Regards
Mikko Korkalo
next reply other threads:[~2010-11-29 11:49 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-11-29 11:41 Mikko Korkalo [this message]
-- strict thread matches above, loose matches on Subject: below --
2010-10-25 18:13 2.6.36: Dropped interrupts in ata_piix Mike Waychison
2010-10-26 9:58 ` Tejun Heo
2010-10-26 18:08 ` Mike Waychison
2010-10-27 2:33 ` Mike Waychison
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4CF39169.6010601@korkalo.fi \
--to=mikko@korkalo.fi \
--cc=4CC78F95.4050107@google.com \
--cc=linux-scsi@vger.kernel.org \
--cc=mikew@google.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.