* Re: FW: Eclipse plugin question [not found] <789F9655DD1B8F43B48D77C5D30659732FF051D3@shsmsx501.ccr.corp.intel.com> @ 2010-12-02 18:26 ` Gary Thomas 2010-12-02 19:40 ` Zhang, Jessica 0 siblings, 1 reply; 5+ messages in thread From: Gary Thomas @ 2010-12-02 18:26 UTC (permalink / raw) To: Ke, Liping; +Cc: poky@yoctoproject.org [-- Attachment #1: Type: text/plain, Size: 4381 bytes --] On 11/25/2010 07:13 PM, Ke, Liping wrote: > Seems I use wrong mail list and lost the mail. > > Yes. Indeed we need to document this considering the code will > be finally in the TCF upstream, more users might need it. I've tried these, but still can't run any programs. When I'm in the RSE browser mode, I can talk to the board, view processes, files, etc. However, when I try to run code, it just sits there. I see the attached messages on the host console where I started eclipse. Does this help? I can see on my target machine that my program was downloaded (I told it to go to /tmp/yocto_app), but it just doesn't seem to run via the remote connection. Ideas? >> -----Original Message----- >> From: Ke, Liping >> Sent: Friday, November 26, 2010 9:35 AM >> To: 'Gary Thomas'; Poky >> Subject: RE: [poky] Eclipse plugin question >> >> Hi, Gary >> >> Thanks for the trying. I have seen your screenshot. Just one more >> question. You have set up an connection 192.168.12.177. Can you tell us >> which connection type you are created? If you're creating TCF >> connection(Please fill the properties of your connection, such as >> prompt char [$ or # or>, default is #, it depends on the host >> environment]), yes, you need to have a agent running on your target. >> The details are: >> For CDT remote debugger, it depends on shell/terminal services. If no >> response back, it will wait for the input ( Current tcf shell/terminal >> service is similar as telnet shell/terminal service, so both of them >> will not exist but wait for the new input stream of target, that's why >> you see the no-response problem.). >> >> One validation style is that you switch your eclipse perspective -> RSE >> browser, there, you will see the connection name 192.168.12.177 you >> have created. And in that view, you can use RSE browser to view your >> target. If RSE viewer works fine, they your debugger connection will >> just be fine. >> >> >> Paste a screenshot of tcf connection property settings in the >> attachment. At the same time, an agent will be run in the target. >> >> Command.Prompt: $ (in my target machine ubuntu, for normal user, it is >> $. If logged in as root user in target unbuntu, I will change it to #. >> If you are using normal user, please run agent as normal user. >> Otherwise, please run it as $sudo ./agent -Llog) >> Login.Prompt: never change it. >> Login.Required: true (in normal case, we need to login) >> Password.Prompt: never change it. >> Pwd.Required: false If your target permit no password and could be >> directly login, leave it as "false" >> >> Hope above information is useful to you:) Any problem, just let us know! >> >> Thanks a lot! >> criping >> >>> -----Original Message----- >>> From: poky-bounces@yoctoproject.org [mailto:poky- >>> bounces@yoctoproject.org] On Behalf Of Gary Thomas >>> Sent: Friday, November 26, 2010 12:12 AM >>> To: Poky >>> Subject: [poky] Eclipse plugin question >>> >>> I have the eclipse plugin working fairly well now - I can build an >>> application, etc. I tried manually downloading the code to my board >>> (I have real hardware, not QEMU) and it runs fine. >>> >>> Next, I wanted to try running/debugging from eclipse. I set up the >>> run configuration and the code was downloaded to the board. The last >>> indication said it was starting the debugger. >>> This window stayed up a long time and then nothing more. >>> >>> Note: I did figure out that I needed tcf-agent running on my board >>> (this is not documented). I also have GDB server on the board. >>> >>> You can see my setup at http://www.mlbassoc.com/poky/eclipse_plugin >>> >>> Thanks for any ideas/pointers >>> >>> -- >>> ------------------------------------------------------------ >>> Gary Thomas | Consulting for the >>> MLB Associates | Embedded world >>> ------------------------------------------------------------ >>> _______________________________________________ >>> poky mailing list >>> poky@yoctoproject.org >>> https://lists.yoctoproject.org/listinfo/poky -- ------------------------------------------------------------ Gary Thomas | Consulting for the MLB Associates | Embedded world ------------------------------------------------------------ [-- Attachment #2: eclipse_messages --] [-- Type: text/plain, Size: 2093 bytes --] Stream subscribed new stream id: VS0 , type: Terminals is created new stream id: VS1 , type: Terminals is created write line: root value is root write: ****Console terminal shell T1848 exited, current shell ID T1848 write line: value is write: TCF shell Service: Connected write line: echo $PWD'>' write line: chmod +x /tmp/yocto_app;exit stream id: VS0 type: Terminals is disposed stream id: VS1 type: Terminals is disposed org.eclipse.rse.services.clientserver.messages.SystemMessageException: TCF error report: Command: Terminals exit "T1848" Time: 2010-12-02 06:03:53.559 Error text: Invalid context ID Error code: 16 at org.eclipse.tm.internal.tcf.rse.TCFRSETask.getS(Unknown Source) at org.eclipse.tm.internal.tcf.rse.shells.TCFTerminalShell.exit(Unknown Source) at org.eclipse.rse.internal.services.shells.TerminalServiceHostShell.exit(TerminalServiceHostShell.java:122) at org.eclipse.rse.services.shells.HostShellProcessAdapter.destroy(HostShellProcessAdapter.java:66) at org.eclipse.cdt.launch.remote.RemoteRunLaunchDelegate.remoteFileDownload(RemoteRunLaunchDelegate.java:294) at org.eclipse.cdt.launch.remote.RemoteRunLaunchDelegate.launch(RemoteRunLaunchDelegate.java:219) at org.eclipse.debug.internal.core.LaunchConfiguration.launch(LaunchConfiguration.java:853) at org.eclipse.debug.internal.core.LaunchConfiguration.launch(LaunchConfiguration.java:702) at org.eclipse.debug.internal.ui.DebugUIPlugin.buildAndLaunch(DebugUIPlugin.java:923) at org.eclipse.debug.internal.ui.DebugUIPlugin$7.run(DebugUIPlugin.java:1009) at org.eclipse.jface.operation.ModalContext$ModalContextThread.run(ModalContext.java:121) new stream id: VS2 , type: Terminals is created new stream id: VS3 , type: Terminals is created write line: root value is root write: ****Console terminal shell T1853 exited, current shell ID T1853 write line: value is write: TCF shell Service: Connected write line: echo $PWD'>' write line: /tmp/yocto_app;exit ^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: FW: Eclipse plugin question 2010-12-02 18:26 ` FW: Eclipse plugin question Gary Thomas @ 2010-12-02 19:40 ` Zhang, Jessica 2010-12-02 22:16 ` Gary Thomas 0 siblings, 1 reply; 5+ messages in thread From: Zhang, Jessica @ 2010-12-02 19:40 UTC (permalink / raw) To: Gary Thomas, Ke, Liping; +Cc: poky@yoctoproject.org [-- Attachment #1: Type: text/plain, Size: 5047 bytes --] OK, can you try this to ensure your tcf terminal etc. is behaving... 1. Window->Open Perspective->Other->Remote system Explorer 2. In the RSE window, you should see local and below it should have the remote host/board, there should be "Terminals", can you right click "Terminals" and select connect, it'll prompt you to login, after you login, in the right pane of IDE, it should open a remote TCF terminal to the board and do some thing in the remote terminal, e.g. run your program there, etc. 3. Once you've connected, you can also select "Shells"->"Launch Shell", this will open a remote shell tab in the IDE and do something there... Let us know you findings and we'll debug your issue from there. Thanks, Jessica Gary Thomas wrote: > On 11/25/2010 07:13 PM, Ke, Liping wrote: >> Seems I use wrong mail list and lost the mail. >> >> Yes. Indeed we need to document this considering the code will >> be finally in the TCF upstream, more users might need it. > > I've tried these, but still can't run any programs. > > When I'm in the RSE browser mode, I can talk to the board, view > processes, files, etc. > > However, when I try to run code, it just sits there. I see the > attached messages on the host console where I started eclipse. Does > this help? > I can see on my target machine that my program was downloaded (I told > it to go to /tmp/yocto_app), but it just doesn't seem to run via the > remote connection. > > Ideas? > >>> -----Original Message----- >>> From: Ke, Liping >>> Sent: Friday, November 26, 2010 9:35 AM >>> To: 'Gary Thomas'; Poky >>> Subject: RE: [poky] Eclipse plugin question >>> >>> Hi, Gary >>> >>> Thanks for the trying. I have seen your screenshot. Just one more >>> question. You have set up an connection 192.168.12.177. Can you >>> tell us which connection type you are created? If you're creating >>> TCF connection(Please fill the properties of your connection, such >>> as prompt char [$ or # or>, default is #, it depends on the host >>> environment]), yes, you need to have a agent running on your >>> target. The details are: For CDT remote debugger, it depends on >>> shell/terminal services. If no response back, it will wait for the >>> input ( Current tcf shell/terminal service is similar as telnet >>> shell/terminal service, so both of them will not exist but wait for >>> the new input stream of target, that's why you see the no-response >>> problem.). >>> >>> One validation style is that you switch your eclipse perspective -> >>> RSE browser, there, you will see the connection name 192.168.12.177 >>> you have created. And in that view, you can use RSE browser to view >>> your target. If RSE viewer works fine, they your debugger >>> connection will just be fine. >>> >>> >>> Paste a screenshot of tcf connection property settings in the >>> attachment. At the same time, an agent will be run in the target. >>> >>> Command.Prompt: $ (in my target machine ubuntu, for normal user, it >>> is $. If logged in as root user in target unbuntu, I will change it >>> to #. If you are using normal user, please run agent as normal user. >>> Otherwise, please run it as $sudo ./agent -Llog) >>> Login.Prompt: never change it. >>> Login.Required: true (in normal case, we need to login) >>> Password.Prompt: never change it. >>> Pwd.Required: false If your target permit no password and could be >>> directly login, leave it as "false" >>> >>> Hope above information is useful to you:) Any problem, just let us >>> know! >>> >>> Thanks a lot! >>> criping >>> >>>> -----Original Message----- >>>> From: poky-bounces@yoctoproject.org [mailto:poky- >>>> bounces@yoctoproject.org] On Behalf Of Gary Thomas >>>> Sent: Friday, November 26, 2010 12:12 AM >>>> To: Poky >>>> Subject: [poky] Eclipse plugin question >>>> >>>> I have the eclipse plugin working fairly well now - I can build an >>>> application, etc. I tried manually downloading the code to my >>>> board (I have real hardware, not QEMU) and it runs fine. >>>> >>>> Next, I wanted to try running/debugging from eclipse. I set up the >>>> run configuration and the code was downloaded to the board. The >>>> last indication said it was starting the debugger. >>>> This window stayed up a long time and then nothing more. >>>> >>>> Note: I did figure out that I needed tcf-agent running on my board >>>> (this is not documented). I also have GDB server on the board. >>>> >>>> You can see my setup at http://www.mlbassoc.com/poky/eclipse_plugin >>>> >>>> Thanks for any ideas/pointers >>>> >>>> -- >>>> ------------------------------------------------------------ >>>> Gary Thomas | Consulting for the >>>> MLB Associates | Embedded world >>>> ------------------------------------------------------------ >>>> _______________________________________________ >>>> poky mailing list >>>> poky@yoctoproject.org >>>> https://lists.yoctoproject.org/listinfo/poky [-- Attachment #2: smime.p7s --] [-- Type: application/x-pkcs7-signature, Size: 8455 bytes --] ^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: FW: Eclipse plugin question 2010-12-02 19:40 ` Zhang, Jessica @ 2010-12-02 22:16 ` Gary Thomas 2010-12-02 23:32 ` Zhang, Jessica 0 siblings, 1 reply; 5+ messages in thread From: Gary Thomas @ 2010-12-02 22:16 UTC (permalink / raw) To: Zhang, Jessica; +Cc: poky@yoctoproject.org On 12/02/2010 12:40 PM, Zhang, Jessica wrote: > OK, can you try this to ensure your tcf terminal etc. is behaving... > 1. Window->Open Perspective->Other->Remote system Explorer > 2. In the RSE window, you should see local and below it should have the > remote host/board, there should be "Terminals", can you right click > "Terminals" and select connect, it'll prompt you to login, after you login, > in the right pane of IDE, it should open a remote TCF terminal to the board > and do some thing in the remote terminal, e.g. run your program there, etc. > 3. Once you've connected, you can also select "Shells"->"Launch Shell", this > will open a remote shell tab in the IDE and do something there... > > Let us know you findings and we'll debug your issue from there. Interestingly, when I right-click on Terminals, I only have the option to _disconnect_, not connect. I went ahead and disconnected, then reconnected. More messages like before on my host console. No remote TCF terminal. See http://www.mlbassoc.com/poky/EclipsePlugin/TCF-after-connect.png Then I tried to explicitly open a terminal, no luck either http://www.mlbassoc.com/poky/EclipsePlugin/TCF-after-open-terminal.png I also tried to open a shell, still no joy http://www.mlbassoc.com/poky/EclipsePlugin/TCF-after-launch-shell.png Anything else I can try? > Gary Thomas wrote: >> On 11/25/2010 07:13 PM, Ke, Liping wrote: >>> Seems I use wrong mail list and lost the mail. >>> >>> Yes. Indeed we need to document this considering the code will >>> be finally in the TCF upstream, more users might need it. >> >> I've tried these, but still can't run any programs. >> >> When I'm in the RSE browser mode, I can talk to the board, view >> processes, files, etc. >> >> However, when I try to run code, it just sits there. I see the >> attached messages on the host console where I started eclipse. Does >> this help? >> I can see on my target machine that my program was downloaded (I told >> it to go to /tmp/yocto_app), but it just doesn't seem to run via the >> remote connection. >> >> Ideas? >> >>>> -----Original Message----- >>>> From: Ke, Liping >>>> Sent: Friday, November 26, 2010 9:35 AM >>>> To: 'Gary Thomas'; Poky >>>> Subject: RE: [poky] Eclipse plugin question >>>> >>>> Hi, Gary >>>> >>>> Thanks for the trying. I have seen your screenshot. Just one more >>>> question. You have set up an connection 192.168.12.177. Can you >>>> tell us which connection type you are created? If you're creating >>>> TCF connection(Please fill the properties of your connection, such >>>> as prompt char [$ or # or>, default is #, it depends on the host >>>> environment]), yes, you need to have a agent running on your >>>> target. The details are: For CDT remote debugger, it depends on >>>> shell/terminal services. If no response back, it will wait for the >>>> input ( Current tcf shell/terminal service is similar as telnet >>>> shell/terminal service, so both of them will not exist but wait for >>>> the new input stream of target, that's why you see the no-response >>>> problem.). >>>> >>>> One validation style is that you switch your eclipse perspective -> >>>> RSE browser, there, you will see the connection name 192.168.12.177 >>>> you have created. And in that view, you can use RSE browser to view >>>> your target. If RSE viewer works fine, they your debugger >>>> connection will just be fine. >>>> >>>> >>>> Paste a screenshot of tcf connection property settings in the >>>> attachment. At the same time, an agent will be run in the target. >>>> >>>> Command.Prompt: $ (in my target machine ubuntu, for normal user, it >>>> is $. If logged in as root user in target unbuntu, I will change it >>>> to #. If you are using normal user, please run agent as normal user. >>>> Otherwise, please run it as $sudo ./agent -Llog) >>>> Login.Prompt: never change it. >>>> Login.Required: true (in normal case, we need to login) >>>> Password.Prompt: never change it. >>>> Pwd.Required: false If your target permit no password and could be >>>> directly login, leave it as "false" >>>> >>>> Hope above information is useful to you:) Any problem, just let us >>>> know! >>>> >>>> Thanks a lot! >>>> criping >>>> >>>>> -----Original Message----- >>>>> From: poky-bounces@yoctoproject.org [mailto:poky- >>>>> bounces@yoctoproject.org] On Behalf Of Gary Thomas >>>>> Sent: Friday, November 26, 2010 12:12 AM >>>>> To: Poky >>>>> Subject: [poky] Eclipse plugin question >>>>> >>>>> I have the eclipse plugin working fairly well now - I can build an >>>>> application, etc. I tried manually downloading the code to my >>>>> board (I have real hardware, not QEMU) and it runs fine. >>>>> >>>>> Next, I wanted to try running/debugging from eclipse. I set up the >>>>> run configuration and the code was downloaded to the board. The >>>>> last indication said it was starting the debugger. >>>>> This window stayed up a long time and then nothing more. >>>>> >>>>> Note: I did figure out that I needed tcf-agent running on my board >>>>> (this is not documented). I also have GDB server on the board. >>>>> >>>>> You can see my setup at http://www.mlbassoc.com/poky/eclipse_plugin >>>>> >>>>> Thanks for any ideas/pointers >>>>> >>>>> -- >>>>> ------------------------------------------------------------ >>>>> Gary Thomas | Consulting for the >>>>> MLB Associates | Embedded world >>>>> ------------------------------------------------------------ >>>>> _______________________________________________ >>>>> poky mailing list >>>>> poky@yoctoproject.org >>>>> https://lists.yoctoproject.org/listinfo/poky -- ------------------------------------------------------------ Gary Thomas | Consulting for the MLB Associates | Embedded world ------------------------------------------------------------ ^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: FW: Eclipse plugin question 2010-12-02 22:16 ` Gary Thomas @ 2010-12-02 23:32 ` Zhang, Jessica 2010-12-02 23:53 ` Gary Thomas 0 siblings, 1 reply; 5+ messages in thread From: Zhang, Jessica @ 2010-12-02 23:32 UTC (permalink / raw) To: Gary Thomas; +Cc: poky@yoctoproject.org [-- Attachment #1: Type: text/plain, Size: 6703 bytes --] Now, it seems you're having some issue on setting up TCF connections, we need to resolve this before you can use remote debugging/run. Can you right click "Terminals" under "localhost.192.168.1.177" and select "properties", then highlight "TCF Connection Setting" and send us the screen shot of this? One thing I want to point out, since you're connecting to remote system "192.168.1.177" as root, when you login to that system as root, what command prompt you get? E.g. $ or #, then in the TCF connection setup you need to set them exactly the same...also, does root need password to login to the remote device? If so, in the TCF connection wizard, you need to chage PWD.Required from "false" to "true". Gary Thomas wrote: > On 12/02/2010 12:40 PM, Zhang, Jessica wrote: >> OK, can you try this to ensure your tcf terminal etc. is behaving... >> 1. Window->Open Perspective->Other->Remote system Explorer >> 2. In the RSE window, you should see local and below it should have >> the remote host/board, there should be "Terminals", can you right >> click "Terminals" and select connect, it'll prompt you to login, >> after you login, in the right pane of IDE, it should open a remote >> TCF terminal to the board and do some thing in the remote terminal, >> e.g. run your program there, etc. >> 3. Once you've connected, you can also select "Shells"->"Launch >> Shell", this will open a remote shell tab in the IDE and do >> something there... >> >> Let us know you findings and we'll debug your issue from there. > > Interestingly, when I right-click on Terminals, I only have the option > to _disconnect_, not connect. > > I went ahead and disconnected, then reconnected. More messages like > before on my host console. No remote TCF terminal. See > http://www.mlbassoc.com/poky/EclipsePlugin/TCF-after-connect.png > > Then I tried to explicitly open a terminal, no luck either > > http://www.mlbassoc.com/poky/EclipsePlugin/TCF-after-open-terminal.png > > I also tried to open a shell, still no joy > > http://www.mlbassoc.com/poky/EclipsePlugin/TCF-after-launch-shell.png > > Anything else I can try? > >> Gary Thomas wrote: >>> On 11/25/2010 07:13 PM, Ke, Liping wrote: >>>> Seems I use wrong mail list and lost the mail. >>>> >>>> Yes. Indeed we need to document this considering the code will >>>> be finally in the TCF upstream, more users might need it. >>> >>> I've tried these, but still can't run any programs. >>> >>> When I'm in the RSE browser mode, I can talk to the board, view >>> processes, files, etc. >>> >>> However, when I try to run code, it just sits there. I see the >>> attached messages on the host console where I started eclipse. >>> Does this help? I can see on my target machine that my program was >>> downloaded (I told it to go to /tmp/yocto_app), but it just doesn't >>> seem to run via the remote connection. >>> >>> Ideas? >>> >>>>> -----Original Message----- >>>>> From: Ke, Liping >>>>> Sent: Friday, November 26, 2010 9:35 AM >>>>> To: 'Gary Thomas'; Poky >>>>> Subject: RE: [poky] Eclipse plugin question >>>>> >>>>> Hi, Gary >>>>> >>>>> Thanks for the trying. I have seen your screenshot. Just one more >>>>> question. You have set up an connection 192.168.12.177. Can you >>>>> tell us which connection type you are created? If you're creating >>>>> TCF connection(Please fill the properties of your connection, such >>>>> as prompt char [$ or # or>, default is #, it depends on the host >>>>> environment]), yes, you need to have a agent running on your >>>>> target. The details are: For CDT remote debugger, it depends on >>>>> shell/terminal services. If no response back, it will wait for the >>>>> input ( Current tcf shell/terminal service is similar as telnet >>>>> shell/terminal service, so both of them will not exist but wait >>>>> for the new input stream of target, that's why you see the >>>>> no-response problem.). >>>>> >>>>> One validation style is that you switch your eclipse perspective >>>>> -> RSE browser, there, you will see the connection name >>>>> 192.168.12.177 you have created. And in that view, you can use >>>>> RSE browser to view your target. If RSE viewer works fine, they >>>>> your debugger connection will just be fine. >>>>> >>>>> >>>>> Paste a screenshot of tcf connection property settings in the >>>>> attachment. At the same time, an agent will be run in the target. >>>>> >>>>> Command.Prompt: $ (in my target machine ubuntu, for normal user, >>>>> it is $. If logged in as root user in target unbuntu, I will >>>>> change it to #. If you are using normal user, please run agent as >>>>> normal user. Otherwise, please run it as $sudo ./agent -Llog) >>>>> Login.Prompt: never change it. >>>>> Login.Required: true (in normal case, we need to login) >>>>> Password.Prompt: never change it. >>>>> Pwd.Required: false If your target permit no password and could be >>>>> directly login, leave it as "false" >>>>> >>>>> Hope above information is useful to you:) Any problem, just let >>>>> us know! >>>>> >>>>> Thanks a lot! >>>>> criping >>>>> >>>>>> -----Original Message----- >>>>>> From: poky-bounces@yoctoproject.org [mailto:poky- >>>>>> bounces@yoctoproject.org] On Behalf Of Gary Thomas >>>>>> Sent: Friday, November 26, 2010 12:12 AM >>>>>> To: Poky >>>>>> Subject: [poky] Eclipse plugin question >>>>>> >>>>>> I have the eclipse plugin working fairly well now - I can build >>>>>> an application, etc. I tried manually downloading the code to my >>>>>> board (I have real hardware, not QEMU) and it runs fine. >>>>>> >>>>>> Next, I wanted to try running/debugging from eclipse. I set up >>>>>> the run configuration and the code was downloaded to the board. >>>>>> The last indication said it was starting the debugger. >>>>>> This window stayed up a long time and then nothing more. >>>>>> >>>>>> Note: I did figure out that I needed tcf-agent running on my >>>>>> board (this is not documented). I also have GDB server on the >>>>>> board. >>>>>> >>>>>> You can see my setup at >>>>>> http://www.mlbassoc.com/poky/eclipse_plugin >>>>>> >>>>>> Thanks for any ideas/pointers >>>>>> >>>>>> -- >>>>>> ------------------------------------------------------------ >>>>>> Gary Thomas | Consulting for the >>>>>> MLB Associates | Embedded world >>>>>> ------------------------------------------------------------ >>>>>> _______________________________________________ >>>>>> poky mailing list >>>>>> poky@yoctoproject.org >>>>>> https://lists.yoctoproject.org/listinfo/poky [-- Attachment #2: smime.p7s --] [-- Type: application/x-pkcs7-signature, Size: 8455 bytes --] ^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: FW: Eclipse plugin question 2010-12-02 23:32 ` Zhang, Jessica @ 2010-12-02 23:53 ` Gary Thomas 0 siblings, 0 replies; 5+ messages in thread From: Gary Thomas @ 2010-12-02 23:53 UTC (permalink / raw) To: Zhang, Jessica; +Cc: poky@yoctoproject.org On 12/02/2010 04:32 PM, Zhang, Jessica wrote: > Now, it seems you're having some issue on setting up TCF connections, we > need to resolve this before you can use remote debugging/run. Can you right > click "Terminals" under "localhost.192.168.1.177" and select "properties", > then highlight "TCF Connection Setting" and send us the screen shot of this? > > One thing I want to point out, since you're connecting to remote system > "192.168.1.177" as root, when you login to that system as root, what command > prompt you get? E.g. $ or #, then in the TCF connection setup you need to > set them exactly the same...also, does root need password to login to the > remote device? If so, in the TCF connection wizard, you need to chage > PWD.Required from "false" to "true". That was at least part of the problem. I don't recall the TCF wizard ever asking me these questions (but I might have missed it). I poked around and right clicked on the connection (192.168.1.177) and got into the TCF properties and was able to set this to true. I had to restart eclipse to make it go though. At this point, I can run something, thanks. I'll let you know if I have other problems. > > Gary Thomas wrote: >> On 12/02/2010 12:40 PM, Zhang, Jessica wrote: >>> OK, can you try this to ensure your tcf terminal etc. is behaving... >>> 1. Window->Open Perspective->Other->Remote system Explorer >>> 2. In the RSE window, you should see local and below it should have >>> the remote host/board, there should be "Terminals", can you right >>> click "Terminals" and select connect, it'll prompt you to login, >>> after you login, in the right pane of IDE, it should open a remote >>> TCF terminal to the board and do some thing in the remote terminal, >>> e.g. run your program there, etc. >>> 3. Once you've connected, you can also select "Shells"->"Launch >>> Shell", this will open a remote shell tab in the IDE and do >>> something there... >>> >>> Let us know you findings and we'll debug your issue from there. >> >> Interestingly, when I right-click on Terminals, I only have the option >> to _disconnect_, not connect. >> >> I went ahead and disconnected, then reconnected. More messages like >> before on my host console. No remote TCF terminal. See >> http://www.mlbassoc.com/poky/EclipsePlugin/TCF-after-connect.png >> >> Then I tried to explicitly open a terminal, no luck either >> >> http://www.mlbassoc.com/poky/EclipsePlugin/TCF-after-open-terminal.png >> >> I also tried to open a shell, still no joy >> >> http://www.mlbassoc.com/poky/EclipsePlugin/TCF-after-launch-shell.png >> >> Anything else I can try? >> >>> Gary Thomas wrote: >>>> On 11/25/2010 07:13 PM, Ke, Liping wrote: >>>>> Seems I use wrong mail list and lost the mail. >>>>> >>>>> Yes. Indeed we need to document this considering the code will >>>>> be finally in the TCF upstream, more users might need it. >>>> >>>> I've tried these, but still can't run any programs. >>>> >>>> When I'm in the RSE browser mode, I can talk to the board, view >>>> processes, files, etc. >>>> >>>> However, when I try to run code, it just sits there. I see the >>>> attached messages on the host console where I started eclipse. >>>> Does this help? I can see on my target machine that my program was >>>> downloaded (I told it to go to /tmp/yocto_app), but it just doesn't >>>> seem to run via the remote connection. >>>> >>>> Ideas? >>>> >>>>>> -----Original Message----- >>>>>> From: Ke, Liping >>>>>> Sent: Friday, November 26, 2010 9:35 AM >>>>>> To: 'Gary Thomas'; Poky >>>>>> Subject: RE: [poky] Eclipse plugin question >>>>>> >>>>>> Hi, Gary >>>>>> >>>>>> Thanks for the trying. I have seen your screenshot. Just one more >>>>>> question. You have set up an connection 192.168.12.177. Can you >>>>>> tell us which connection type you are created? If you're creating >>>>>> TCF connection(Please fill the properties of your connection, such >>>>>> as prompt char [$ or # or>, default is #, it depends on the host >>>>>> environment]), yes, you need to have a agent running on your >>>>>> target. The details are: For CDT remote debugger, it depends on >>>>>> shell/terminal services. If no response back, it will wait for the >>>>>> input ( Current tcf shell/terminal service is similar as telnet >>>>>> shell/terminal service, so both of them will not exist but wait >>>>>> for the new input stream of target, that's why you see the >>>>>> no-response problem.). >>>>>> >>>>>> One validation style is that you switch your eclipse perspective >>>>>> -> RSE browser, there, you will see the connection name >>>>>> 192.168.12.177 you have created. And in that view, you can use >>>>>> RSE browser to view your target. If RSE viewer works fine, they >>>>>> your debugger connection will just be fine. >>>>>> >>>>>> >>>>>> Paste a screenshot of tcf connection property settings in the >>>>>> attachment. At the same time, an agent will be run in the target. >>>>>> >>>>>> Command.Prompt: $ (in my target machine ubuntu, for normal user, >>>>>> it is $. If logged in as root user in target unbuntu, I will >>>>>> change it to #. If you are using normal user, please run agent as >>>>>> normal user. Otherwise, please run it as $sudo ./agent -Llog) >>>>>> Login.Prompt: never change it. >>>>>> Login.Required: true (in normal case, we need to login) >>>>>> Password.Prompt: never change it. >>>>>> Pwd.Required: false If your target permit no password and could be >>>>>> directly login, leave it as "false" >>>>>> >>>>>> Hope above information is useful to you:) Any problem, just let >>>>>> us know! >>>>>> >>>>>> Thanks a lot! >>>>>> criping >>>>>> >>>>>>> -----Original Message----- >>>>>>> From: poky-bounces@yoctoproject.org [mailto:poky- >>>>>>> bounces@yoctoproject.org] On Behalf Of Gary Thomas >>>>>>> Sent: Friday, November 26, 2010 12:12 AM >>>>>>> To: Poky >>>>>>> Subject: [poky] Eclipse plugin question >>>>>>> >>>>>>> I have the eclipse plugin working fairly well now - I can build >>>>>>> an application, etc. I tried manually downloading the code to my >>>>>>> board (I have real hardware, not QEMU) and it runs fine. >>>>>>> >>>>>>> Next, I wanted to try running/debugging from eclipse. I set up >>>>>>> the run configuration and the code was downloaded to the board. >>>>>>> The last indication said it was starting the debugger. >>>>>>> This window stayed up a long time and then nothing more. >>>>>>> >>>>>>> Note: I did figure out that I needed tcf-agent running on my >>>>>>> board (this is not documented). I also have GDB server on the >>>>>>> board. >>>>>>> >>>>>>> You can see my setup at >>>>>>> http://www.mlbassoc.com/poky/eclipse_plugin >>>>>>> >>>>>>> Thanks for any ideas/pointers >>>>>>> >>>>>>> -- >>>>>>> ------------------------------------------------------------ >>>>>>> Gary Thomas | Consulting for the >>>>>>> MLB Associates | Embedded world >>>>>>> ------------------------------------------------------------ >>>>>>> _______________________________________________ >>>>>>> poky mailing list >>>>>>> poky@yoctoproject.org >>>>>>> https://lists.yoctoproject.org/listinfo/poky -- ------------------------------------------------------------ Gary Thomas | Consulting for the MLB Associates | Embedded world ------------------------------------------------------------ ^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2010-12-02 23:53 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
[not found] <789F9655DD1B8F43B48D77C5D30659732FF051D3@shsmsx501.ccr.corp.intel.com>
2010-12-02 18:26 ` FW: Eclipse plugin question Gary Thomas
2010-12-02 19:40 ` Zhang, Jessica
2010-12-02 22:16 ` Gary Thomas
2010-12-02 23:32 ` Zhang, Jessica
2010-12-02 23:53 ` Gary Thomas
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.