From: Taku Izumi <izumi.taku@jp.fujitsu.com>
To: "netdev@vger.kernel.org" <netdev@vger.kernel.org>,
Jay Vosburgh <fubar@us.ibm.com>
Cc: eric.dumazet@gmail.com, shemminger@vyatta.com
Subject: [PATCH 2/3] bonding: migrate some macros from bond_alb.c to bond_alb.h
Date: Fri, 03 Dec 2010 16:22:04 +0900 [thread overview]
Message-ID: <4CF89A9C.8080603@jp.fujitsu.com> (raw)
In-Reply-To: <4CF89A00.8030902@jp.fujitsu.com>
This patch simply migrates some macros from bond_alb.c to bond_alb.h.
Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com>
---
drivers/net/bonding/bond_alb.c | 36 ------------------------------------
drivers/net/bonding/bond_alb.h | 38 ++++++++++++++++++++++++++++++++++++++
2 files changed, 38 insertions(+), 36 deletions(-)
Index: net-next/drivers/net/bonding/bond_alb.c
===================================================================
--- net-next.orig/drivers/net/bonding/bond_alb.c
+++ net-next/drivers/net/bonding/bond_alb.c
@@ -44,42 +44,6 @@
#include "bond_alb.h"
-#define ALB_TIMER_TICKS_PER_SEC 10 /* should be a divisor of HZ */
-#define BOND_TLB_REBALANCE_INTERVAL 10 /* In seconds, periodic re-balancing.
- * Used for division - never set
- * to zero !!!
- */
-#define BOND_ALB_LP_INTERVAL 1 /* In seconds, periodic send of
- * learning packets to the switch
- */
-
-#define BOND_TLB_REBALANCE_TICKS (BOND_TLB_REBALANCE_INTERVAL \
- * ALB_TIMER_TICKS_PER_SEC)
-
-#define BOND_ALB_LP_TICKS (BOND_ALB_LP_INTERVAL \
- * ALB_TIMER_TICKS_PER_SEC)
-
-#define TLB_HASH_TABLE_SIZE 256 /* The size of the clients hash table.
- * Note that this value MUST NOT be smaller
- * because the key hash table is BYTE wide !
- */
-
-
-#define TLB_NULL_INDEX 0xffffffff
-#define MAX_LP_BURST 3
-
-/* rlb defs */
-#define RLB_HASH_TABLE_SIZE 256
-#define RLB_NULL_INDEX 0xffffffff
-#define RLB_UPDATE_DELAY 2*ALB_TIMER_TICKS_PER_SEC /* 2 seconds */
-#define RLB_ARP_BURST_SIZE 2
-#define RLB_UPDATE_RETRY 3 /* 3-ticks - must be smaller than the rlb
- * rebalance interval (5 min).
- */
-/* RLB_PROMISC_TIMEOUT = 10 sec equals the time that the current slave is
- * promiscuous after failover
- */
-#define RLB_PROMISC_TIMEOUT 10*ALB_TIMER_TICKS_PER_SEC
#ifndef __long_aligned
#define __long_aligned __attribute__((aligned((sizeof(long)))))
Index: net-next/drivers/net/bonding/bond_alb.h
===================================================================
--- net-next.orig/drivers/net/bonding/bond_alb.h
+++ net-next/drivers/net/bonding/bond_alb.h
@@ -31,6 +31,44 @@ struct slave;
#define BOND_ALB_INFO(bond) ((bond)->alb_info)
#define SLAVE_TLB_INFO(slave) ((slave)->tlb_info)
+#define ALB_TIMER_TICKS_PER_SEC 10 /* should be a divisor of HZ */
+#define BOND_TLB_REBALANCE_INTERVAL 10 /* In seconds, periodic re-balancing.
+ * Used for division - never set
+ * to zero !!!
+ */
+#define BOND_ALB_LP_INTERVAL 1 /* In seconds, periodic send of
+ * learning packets to the switch
+ */
+
+#define BOND_TLB_REBALANCE_TICKS (BOND_TLB_REBALANCE_INTERVAL \
+ * ALB_TIMER_TICKS_PER_SEC)
+
+#define BOND_ALB_LP_TICKS (BOND_ALB_LP_INTERVAL \
+ * ALB_TIMER_TICKS_PER_SEC)
+
+#define TLB_HASH_TABLE_SIZE 256 /* The size of the clients hash table.
+ * Note that this value MUST NOT be smaller
+ * because the key hash table is BYTE wide !
+ */
+
+
+#define TLB_NULL_INDEX 0xffffffff
+#define MAX_LP_BURST 3
+
+/* rlb defs */
+#define RLB_HASH_TABLE_SIZE 256
+#define RLB_NULL_INDEX 0xffffffff
+#define RLB_UPDATE_DELAY (2*ALB_TIMER_TICKS_PER_SEC) /* 2 seconds */
+#define RLB_ARP_BURST_SIZE 2
+#define RLB_UPDATE_RETRY 3 /* 3-ticks - must be smaller than the rlb
+ * rebalance interval (5 min).
+ */
+/* RLB_PROMISC_TIMEOUT = 10 sec equals the time that the current slave is
+ * promiscuous after failover
+ */
+#define RLB_PROMISC_TIMEOUT (10*ALB_TIMER_TICKS_PER_SEC)
+
+
struct tlb_client_info {
struct slave *tx_slave; /* A pointer to slave used for transmiting
* packets to a Client that the Hash function
next prev parent reply other threads:[~2010-12-03 7:22 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-12-03 7:19 [PATCH v2 0/3] bonding: add the debugfs interface to see RLB hash table Taku Izumi
2010-12-03 7:21 ` [PATCH 1/3] bonding: add the debugfs facility to the bonding driver Taku Izumi
2010-12-10 1:17 ` Taku Izumi
2010-12-11 0:21 ` Jay Vosburgh
2010-12-11 0:23 ` David Miller
2010-12-13 5:09 ` Taku Izumi
2010-12-13 5:15 ` David Miller
2010-12-03 7:22 ` Taku Izumi [this message]
2010-12-13 5:03 ` [PATCH 2/3] bonding: migrate some macros from bond_alb.c to bond_alb.h Taku Izumi
2010-12-16 20:35 ` David Miller
2010-12-03 7:22 ` [PATCH 3/3] bonding: add the debugfs interface to see RLB hash table Taku Izumi
2010-12-13 5:04 ` Taku Izumi
2010-12-16 20:35 ` David Miller
2010-12-08 20:33 ` [PATCH v2 0/3] " Jay Vosburgh
2010-12-09 10:43 ` Taku Izumi
2010-12-10 1:24 ` Taku Izumi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4CF89A9C.8080603@jp.fujitsu.com \
--to=izumi.taku@jp.fujitsu.com \
--cc=eric.dumazet@gmail.com \
--cc=fubar@us.ibm.com \
--cc=netdev@vger.kernel.org \
--cc=shemminger@vyatta.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.