From: Taku Izumi <izumi.taku@jp.fujitsu.com>
To: "netdev@vger.kernel.org" <netdev@vger.kernel.org>,
Jay Vosburgh <fubar@us.ibm.com>
Cc: eric.dumazet@gmail.com, shemminger@vyatta.com
Subject: [PATCH 3/3] bonding: add the debugfs interface to see RLB hash table
Date: Fri, 03 Dec 2010 16:22:42 +0900 [thread overview]
Message-ID: <4CF89AC2.6030606@jp.fujitsu.com> (raw)
In-Reply-To: <4CF89A00.8030902@jp.fujitsu.com>
This patch provices the debugfs interface to see RLB hash table
like the following:
# cat /sys/kernel/debug/bonding/bond0/rlb_hash_table
SourceIP DestinationIP Destination MAC DEV
10.124.196.205 10.124.196.205 ff:ff:ff:ff:ff:ff eth4
10.124.196.205 10.124.196.81 00:19:99:XX:XX:XX eth3
10.124.196.205 10.124.196.1 00:21:d8:XX:XX:XX eth0
This is helpful to check if the receive load balancing works as expected.
Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com>
---
drivers/net/bonding/bond_debugfs.c | 50 +++++++++++++++++++++++++++++++++++++
1 file changed, 50 insertions(+)
Index: net-next/drivers/net/bonding/bond_debugfs.c
===================================================================
--- net-next.orig/drivers/net/bonding/bond_debugfs.c
+++ net-next/drivers/net/bonding/bond_debugfs.c
@@ -4,6 +4,7 @@
#include <linux/netdevice.h>
#include "bonding.h"
+#include "bond_alb.h"
#ifdef CONFIG_DEBUG_FS
@@ -12,6 +13,52 @@
static struct dentry *bonding_debug_root;
+/*
+ * Show RLB hash table
+ */
+static int bond_debug_rlb_hash_show(struct seq_file *m, void *v)
+{
+ struct bonding *bond = m->private;
+ struct alb_bond_info *bond_info = &(BOND_ALB_INFO(bond));
+ struct rlb_client_info *client_info;
+ u32 hash_index;
+
+ if (bond->params.mode != BOND_MODE_ALB)
+ return 0;
+
+ seq_printf(m, "SourceIP DestinationIP "
+ "Destination MAC DEV\n");
+
+ spin_lock_bh(&(BOND_ALB_INFO(bond).rx_hashtbl_lock));
+
+ hash_index = bond_info->rx_hashtbl_head;
+ for (; hash_index != RLB_NULL_INDEX; hash_index = client_info->next) {
+ client_info = &(bond_info->rx_hashtbl[hash_index]);
+ seq_printf(m, "%-15pI4 %-15pI4 %-17pM %s\n",
+ &client_info->ip_src,
+ &client_info->ip_dst,
+ &client_info->mac_dst,
+ client_info->slave->dev->name);
+ }
+
+ spin_unlock_bh(&(BOND_ALB_INFO(bond).rx_hashtbl_lock));
+
+ return 0;
+}
+
+static int bond_debug_rlb_hash_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, bond_debug_rlb_hash_show, inode->i_private);
+}
+
+static const struct file_operations bond_debug_rlb_hash_fops = {
+ .owner = THIS_MODULE,
+ .open = bond_debug_rlb_hash_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+};
+
void bond_debug_register(struct bonding *bond)
{
if (!bonding_debug_root)
@@ -25,6 +72,9 @@ void bond_debug_register(struct bonding
bond->dev->name);
return;
}
+
+ debugfs_create_file("rlb_hash_table", 0400, bond->debug_dir,
+ bond, &bond_debug_rlb_hash_fops);
}
void bond_debug_unregister(struct bonding *bond)
next prev parent reply other threads:[~2010-12-03 7:22 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-12-03 7:19 [PATCH v2 0/3] bonding: add the debugfs interface to see RLB hash table Taku Izumi
2010-12-03 7:21 ` [PATCH 1/3] bonding: add the debugfs facility to the bonding driver Taku Izumi
2010-12-10 1:17 ` Taku Izumi
2010-12-11 0:21 ` Jay Vosburgh
2010-12-11 0:23 ` David Miller
2010-12-13 5:09 ` Taku Izumi
2010-12-13 5:15 ` David Miller
2010-12-03 7:22 ` [PATCH 2/3] bonding: migrate some macros from bond_alb.c to bond_alb.h Taku Izumi
2010-12-13 5:03 ` Taku Izumi
2010-12-16 20:35 ` David Miller
2010-12-03 7:22 ` Taku Izumi [this message]
2010-12-13 5:04 ` [PATCH 3/3] bonding: add the debugfs interface to see RLB hash table Taku Izumi
2010-12-16 20:35 ` David Miller
2010-12-08 20:33 ` [PATCH v2 0/3] " Jay Vosburgh
2010-12-09 10:43 ` Taku Izumi
2010-12-10 1:24 ` Taku Izumi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4CF89AC2.6030606@jp.fujitsu.com \
--to=izumi.taku@jp.fujitsu.com \
--cc=eric.dumazet@gmail.com \
--cc=fubar@us.ibm.com \
--cc=netdev@vger.kernel.org \
--cc=shemminger@vyatta.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.