From: Avi Kivity <avi@redhat.com>
To: Andre Przywara <andre.przywara@amd.com>
Cc: kvm@vger.kernel.org, mtosatti@redhat.com
Subject: Re: [PATCH 5/5] kvm/svm: copy instruction bytes from VMCB
Date: Tue, 07 Dec 2010 15:33:22 +0200 [thread overview]
Message-ID: <4CFE37A2.7010703@redhat.com> (raw)
In-Reply-To: <1291719586-22533-6-git-send-email-andre.przywara@amd.com>
On 12/07/2010 12:59 PM, Andre Przywara wrote:
> In case of a nested page fault or an intercepted #PF newer SVM
> implementations provide a copy of the faulting instruction bytes
> in the VMCB.
> Use these bytes to feed the instruction emulator and avoid the costly
> guest instruction fetch in this case.
>
>
>
> diff --git a/arch/x86/include/asm/kvm_host.h b/arch/x86/include/asm/kvm_host.h
> index cfbcbfa..3e3a67e 100644
> --- a/arch/x86/include/asm/kvm_host.h
> +++ b/arch/x86/include/asm/kvm_host.h
> @@ -586,6 +586,9 @@ struct kvm_x86_ops {
> void (*write_tsc_offset)(struct kvm_vcpu *vcpu, u64 offset);
>
> void (*get_exit_info)(struct kvm_vcpu *vcpu, u64 *info1, u64 *info2);
> +
> + int (*prefetch_instruction)(struct kvm_vcpu *vcpu);
> +
> const struct trace_print_flags *exit_reasons_str;
> };
How about adding a byte array/len parameter to x86_decode_insn()? It
could be used to prefill the buffer instead of invoking a callback.
>
> diff --git a/arch/x86/kvm/emulate.c b/arch/x86/kvm/emulate.c
> index 6366735..abff8ff 100644
> --- a/arch/x86/kvm/emulate.c
> +++ b/arch/x86/kvm/emulate.c
> @@ -525,6 +525,7 @@ static int do_insn_fetch(struct x86_emulate_ctxt *ctxt,
> /* x86 instructions are limited to 15 bytes. */
> if (eip + size - ctxt->eip> 15)
> return X86EMUL_UNHANDLEABLE;
> + kvm_x86_ops->prefetch_instruction(ctxt->vcpu);
Even with the callback, this belongs in x86_decode_insn(), not on every
fetch.
> while (size--) {
> rc = do_fetch_insn_byte(ctxt, ops, eip++, dest++);
> if (rc != X86EMUL_CONTINUE)
> diff --git a/arch/x86/kvm/svm.c b/arch/x86/kvm/svm.c
> index 3cf2cef..ed94e9a 100644
> --- a/arch/x86/kvm/svm.c
> +++ b/arch/x86/kvm/svm.c
> @@ -464,6 +464,24 @@ static void skip_emulated_instruction(struct kvm_vcpu *vcpu)
> svm_set_interrupt_shadow(vcpu, 0);
> }
>
> +static int prefetch_instruction(struct kvm_vcpu *vcpu)
svm_prefetch_instruction()
> +{
> + struct vcpu_svm *svm = to_svm(vcpu);
> + uint8_t len;
> + struct fetch_cache *fetch;
> +
> + len = svm->vmcb->control.insn_len& 0x0F;
> + if (len == 0)
> + return 1;
> +
> + fetch =&svm->vcpu.arch.emulate_ctxt.decode.fetch;
> + fetch->start = kvm_rip_read(&svm->vcpu);
> + fetch->end = fetch->start + len;
> + memcpy(fetch->data, svm->vmcb->control.insn_bytes, len);
> +
> + return 0;
> +}
svm code shouldn't reach in so deep into the emulator privates.
--
error compiling committee.c: too many arguments to function
next prev parent reply other threads:[~2010-12-07 13:33 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-12-07 10:59 [PATCH 0/5] kvm/svm: implement new DecodeAssist features Andre Przywara
2010-12-07 10:59 ` [PATCH 1/5] kvm/svm: add new SVM feature bit names Andre Przywara
2010-12-07 10:59 ` [PATCH 2/5] kvm/svm: enhance MOV CR intercept handler Andre Przywara
2010-12-07 13:24 ` Avi Kivity
2010-12-07 14:30 ` Andre Przywara
2010-12-07 14:41 ` Avi Kivity
2010-12-07 10:59 ` [PATCH 3/5] kvm/svm: enhance mov DR " Andre Przywara
2010-12-07 11:02 ` Alexander Graf
2010-12-07 13:14 ` Avi Kivity
2010-12-07 13:25 ` Avi Kivity
2010-12-07 10:59 ` [PATCH 4/5] kvm/svm: implement enhanced INVLPG intercept Andre Przywara
2010-12-07 13:27 ` Avi Kivity
2010-12-07 10:59 ` [PATCH 5/5] kvm/svm: copy instruction bytes from VMCB Andre Przywara
2010-12-07 13:33 ` Avi Kivity [this message]
-- strict thread matches above, loose matches on Subject: below --
2010-12-10 13:51 [PATCH -v2 0/5] kvm/svm: implement new DecodeAssist features Andre Przywara
2010-12-10 13:51 ` [PATCH 5/5] kvm/svm: copy instruction bytes from VMCB Andre Przywara
2010-12-13 12:24 ` Avi Kivity
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4CFE37A2.7010703@redhat.com \
--to=avi@redhat.com \
--cc=andre.przywara@amd.com \
--cc=kvm@vger.kernel.org \
--cc=mtosatti@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.