* Milestone 2 Stabilization Branch Created (Resend)
@ 2010-12-11 19:44 Saul Wold
2010-12-13 2:10 ` [poky] " Xu, Jiajun
0 siblings, 1 reply; 11+ messages in thread
From: Saul Wold @ 2010-12-11 19:44 UTC (permalink / raw)
To: poky@yoctoproject.org, Yocto Project Discussion
[Resend with correct mailing lists]
Yocto / Poky Folks:
Thanks to everyone's hard work, we are currently on working getting the
first build of M2 started and available for QA testing on Monday.
I have pushed out the lastest commit that was pending in the
distro/master area to both master and create a builds/milestone branch
which is where bug fixes for M2 will go.
There is currently an issue with the PPC Kernel build on this branch and
that is being worked, this may impact getting a PPC build available by
Monday.
For the next week as we stabilize M2, please ensure that any patch or
pull requests indicate that this is for M2 or not. By default all
commits will go to master regardless.
Thanks
Sau!
Saul Wold
Yocto Component Wrangler @ Intel
Yocto Project / Poky Build System
^ permalink raw reply [flat|nested] 11+ messages in thread* Re: Milestone 2 Stabilization Branch Created (Resend) 2010-12-11 19:44 Milestone 2 Stabilization Branch Created (Resend) Saul Wold @ 2010-12-13 2:10 ` Xu, Jiajun 0 siblings, 0 replies; 11+ messages in thread From: Xu, Jiajun @ 2010-12-13 2:10 UTC (permalink / raw) To: Saul Wold, poky@yoctoproject.org, Yocto Project Discussion > [Resend with correct mailing lists] > > > Yocto / Poky Folks: > > Thanks to everyone's hard work, we are currently on working getting > the first build of M2 started and available for QA testing on Monday. > > I have pushed out the lastest commit that was pending in the > distro/master area to both master and create a builds/milestone branch > which is where bug fixes for M2 will go. > > There is currently an issue with the PPC Kernel build on this branch > and that is being worked, this may impact getting a PPC build available by Monday. > > For the next week as we stabilize M2, please ensure that any patch or > pull requests indicate that this is for M2 or not. By default all > commits will go to master regardless. > Hi Saul, Nightly build is near finished now. PPC and some non-x86 real hardware target building failed. I begin downloading them now and will start QA testing. > Thanks > Sau! > Saul Wold > Yocto Component Wrangler @ Intel > Yocto Project / Poky Build System > > _______________________________________________ > poky mailing list > poky@yoctoproject.org > https://lists.yoctoproject.org/listinfo/poky Best Regards, Jiajun ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [poky] Milestone 2 Stabilization Branch Created (Resend) @ 2010-12-13 2:10 ` Xu, Jiajun 0 siblings, 0 replies; 11+ messages in thread From: Xu, Jiajun @ 2010-12-13 2:10 UTC (permalink / raw) To: Saul Wold, poky@yoctoproject.org, Yocto Project Discussion > [Resend with correct mailing lists] > > > Yocto / Poky Folks: > > Thanks to everyone's hard work, we are currently on working getting > the first build of M2 started and available for QA testing on Monday. > > I have pushed out the lastest commit that was pending in the > distro/master area to both master and create a builds/milestone branch > which is where bug fixes for M2 will go. > > There is currently an issue with the PPC Kernel build on this branch > and that is being worked, this may impact getting a PPC build available by Monday. > > For the next week as we stabilize M2, please ensure that any patch or > pull requests indicate that this is for M2 or not. By default all > commits will go to master regardless. > Hi Saul, Nightly build is near finished now. PPC and some non-x86 real hardware target building failed. I begin downloading them now and will start QA testing. > Thanks > Sau! > Saul Wold > Yocto Component Wrangler @ Intel > Yocto Project / Poky Build System > > _______________________________________________ > poky mailing list > poky@yoctoproject.org > https://lists.yoctoproject.org/listinfo/poky Best Regards, Jiajun ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: Milestone 2 Stabilization Branch Created (Resend) 2010-12-13 2:10 ` [poky] " Xu, Jiajun @ 2010-12-13 4:37 ` Bruce Ashfield -1 siblings, 0 replies; 11+ messages in thread From: Bruce Ashfield @ 2010-12-13 4:37 UTC (permalink / raw) To: Xu, Jiajun; +Cc: Yocto Project Discussion, poky@yoctoproject.org On Sun, Dec 12, 2010 at 9:10 PM, Xu, Jiajun <jiajun.xu@intel.com> wrote: >> [Resend with correct mailing lists] >> >> >> Yocto / Poky Folks: >> >> Thanks to everyone's hard work, we are currently on working getting >> the first build of M2 started and available for QA testing on Monday. >> >> I have pushed out the lastest commit that was pending in the >> distro/master area to both master and create a builds/milestone branch >> which is where bug fixes for M2 will go. >> >> There is currently an issue with the PPC Kernel build on this branch >> and that is being worked, this may impact getting a PPC build available by Monday. >> >> For the next week as we stabilize M2, please ensure that any patch or >> pull requests indicate that this is for M2 or not. By default all >> commits will go to master regardless. >> > > Hi Saul, > Nightly build is near finished now. PPC and some non-x86 real hardware target building failed. I begin downloading them now and will start QA testing. Is there somewhere I can check a log of the build errors ? We flipped in the 2.6.37 kernel and associated tools, but the any hardware targets should still be building 2.6.34 and be unaffected. If it isn't a kernel that failed to build .. then I'm less help :) Cheers, Bruce > >> Thanks >> Sau! >> Saul Wold >> Yocto Component Wrangler @ Intel >> Yocto Project / Poky Build System >> >> _______________________________________________ >> poky mailing list >> poky@yoctoproject.org >> https://lists.yoctoproject.org/listinfo/poky > > Best Regards, > Jiajun > > _______________________________________________ > poky mailing list > poky@yoctoproject.org > https://lists.yoctoproject.org/listinfo/poky > -- "Thou shalt not follow the NULL pointer, for chaos and madness await thee at its end" ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [poky] Milestone 2 Stabilization Branch Created (Resend) @ 2010-12-13 4:37 ` Bruce Ashfield 0 siblings, 0 replies; 11+ messages in thread From: Bruce Ashfield @ 2010-12-13 4:37 UTC (permalink / raw) To: Xu, Jiajun; +Cc: Yocto Project Discussion, poky@yoctoproject.org On Sun, Dec 12, 2010 at 9:10 PM, Xu, Jiajun <jiajun.xu@intel.com> wrote: >> [Resend with correct mailing lists] >> >> >> Yocto / Poky Folks: >> >> Thanks to everyone's hard work, we are currently on working getting >> the first build of M2 started and available for QA testing on Monday. >> >> I have pushed out the lastest commit that was pending in the >> distro/master area to both master and create a builds/milestone branch >> which is where bug fixes for M2 will go. >> >> There is currently an issue with the PPC Kernel build on this branch >> and that is being worked, this may impact getting a PPC build available by Monday. >> >> For the next week as we stabilize M2, please ensure that any patch or >> pull requests indicate that this is for M2 or not. By default all >> commits will go to master regardless. >> > > Hi Saul, > Nightly build is near finished now. PPC and some non-x86 real hardware target building failed. I begin downloading them now and will start QA testing. Is there somewhere I can check a log of the build errors ? We flipped in the 2.6.37 kernel and associated tools, but the any hardware targets should still be building 2.6.34 and be unaffected. If it isn't a kernel that failed to build .. then I'm less help :) Cheers, Bruce > >> Thanks >> Sau! >> Saul Wold >> Yocto Component Wrangler @ Intel >> Yocto Project / Poky Build System >> >> _______________________________________________ >> poky mailing list >> poky@yoctoproject.org >> https://lists.yoctoproject.org/listinfo/poky > > Best Regards, > Jiajun > > _______________________________________________ > poky mailing list > poky@yoctoproject.org > https://lists.yoctoproject.org/listinfo/poky > -- "Thou shalt not follow the NULL pointer, for chaos and madness await thee at its end" ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: Milestone 2 Stabilization Branch Created (Resend) 2010-12-13 4:37 ` [poky] " Bruce Ashfield @ 2010-12-13 5:03 ` Xu, Jiajun -1 siblings, 0 replies; 11+ messages in thread From: Xu, Jiajun @ 2010-12-13 5:03 UTC (permalink / raw) To: Bruce Ashfield; +Cc: Yocto Project Discussion, poky@yoctoproject.org > On Sun, Dec 12, 2010 at 9:10 PM, Xu, Jiajun <jiajun.xu@intel.com> wrote: >>> [Resend with correct mailing lists] >>> >>> >>> Yocto / Poky Folks: >>> >>> Thanks to everyone's hard work, we are currently on working getting >>> the first build of M2 started and available for QA testing on Monday. >>> >>> I have pushed out the lastest commit that was pending in the >>> distro/master area to both master and create a builds/milestone >>> branch which is where bug fixes for M2 will go. >>> >>> There is currently an issue with the PPC Kernel build on this branch >>> and that is being worked, this may impact getting a PPC build >>> available by Monday. >>> >>> For the next week as we stabilize M2, please ensure that any patch >>> or pull requests indicate that this is for M2 or not. By default >>> all commits will go to master regardless. >>> >> >> Hi Saul, >> Nightly build is near finished now. PPC and some non-x86 real >> hardware > target building failed. I begin downloading them now and will start QA testing. > > Is there somewhere I can check a log of the build errors ? We flipped > in the > 2.6.37 kernel and associated tools, but the any hardware targets > should still be building 2.6.34 and be unaffected. > > If it isn't a kernel that failed to build .. then I'm less help :) > For beagleboard, http://autobuilder.pokylinux.org:8010/builders/nightly-release/builds/146/steps/shell_46/logs/stdio/text. For mpc8315e-rdb, http://autobuilder.pokylinux.org:8010/builders/nightly-release/builds/146/steps/shell_49/logs/stdio/text. > Cheers, > > Bruce > >> >>> Thanks >>> Sau! >>> Saul Wold >>> Yocto Component Wrangler @ Intel >>> Yocto Project / Poky Build System >>> >>> _______________________________________________ >>> poky mailing list >>> poky@yoctoproject.org >>> https://lists.yoctoproject.org/listinfo/poky >> >> Best Regards, >> Jiajun >> >> _______________________________________________ >> poky mailing list >> poky@yoctoproject.org >> https://lists.yoctoproject.org/listinfo/poky >> > > > Best Regards, Jiajun ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [poky] Milestone 2 Stabilization Branch Created (Resend) @ 2010-12-13 5:03 ` Xu, Jiajun 0 siblings, 0 replies; 11+ messages in thread From: Xu, Jiajun @ 2010-12-13 5:03 UTC (permalink / raw) To: Bruce Ashfield; +Cc: Yocto Project Discussion, poky@yoctoproject.org > On Sun, Dec 12, 2010 at 9:10 PM, Xu, Jiajun <jiajun.xu@intel.com> wrote: >>> [Resend with correct mailing lists] >>> >>> >>> Yocto / Poky Folks: >>> >>> Thanks to everyone's hard work, we are currently on working getting >>> the first build of M2 started and available for QA testing on Monday. >>> >>> I have pushed out the lastest commit that was pending in the >>> distro/master area to both master and create a builds/milestone >>> branch which is where bug fixes for M2 will go. >>> >>> There is currently an issue with the PPC Kernel build on this branch >>> and that is being worked, this may impact getting a PPC build >>> available by Monday. >>> >>> For the next week as we stabilize M2, please ensure that any patch >>> or pull requests indicate that this is for M2 or not. By default >>> all commits will go to master regardless. >>> >> >> Hi Saul, >> Nightly build is near finished now. PPC and some non-x86 real >> hardware > target building failed. I begin downloading them now and will start QA testing. > > Is there somewhere I can check a log of the build errors ? We flipped > in the > 2.6.37 kernel and associated tools, but the any hardware targets > should still be building 2.6.34 and be unaffected. > > If it isn't a kernel that failed to build .. then I'm less help :) > For beagleboard, http://autobuilder.pokylinux.org:8010/builders/nightly-release/builds/146/steps/shell_46/logs/stdio/text. For mpc8315e-rdb, http://autobuilder.pokylinux.org:8010/builders/nightly-release/builds/146/steps/shell_49/logs/stdio/text. > Cheers, > > Bruce > >> >>> Thanks >>> Sau! >>> Saul Wold >>> Yocto Component Wrangler @ Intel >>> Yocto Project / Poky Build System >>> >>> _______________________________________________ >>> poky mailing list >>> poky@yoctoproject.org >>> https://lists.yoctoproject.org/listinfo/poky >> >> Best Regards, >> Jiajun >> >> _______________________________________________ >> poky mailing list >> poky@yoctoproject.org >> https://lists.yoctoproject.org/listinfo/poky >> > > > Best Regards, Jiajun ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: Milestone 2 Stabilization Branch Created (Resend) 2010-12-13 5:03 ` [poky] " Xu, Jiajun @ 2010-12-13 5:05 ` Bruce Ashfield -1 siblings, 0 replies; 11+ messages in thread From: Bruce Ashfield @ 2010-12-13 5:05 UTC (permalink / raw) To: Xu, Jiajun; +Cc: Yocto Project Discussion, poky@yoctoproject.org On 10-12-13 12:03 AM, Xu, Jiajun wrote: >> On Sun, Dec 12, 2010 at 9:10 PM, Xu, Jiajun<jiajun.xu@intel.com> wrote: >>>> [Resend with correct mailing lists] >>>> >>>> >>>> Yocto / Poky Folks: >>>> >>>> Thanks to everyone's hard work, we are currently on working getting >>>> the first build of M2 started and available for QA testing on Monday. >>>> >>>> I have pushed out the lastest commit that was pending in the >>>> distro/master area to both master and create a builds/milestone >>>> branch which is where bug fixes for M2 will go. >>>> >>>> There is currently an issue with the PPC Kernel build on this branch >>>> and that is being worked, this may impact getting a PPC build >>>> available by Monday. >>>> >>>> For the next week as we stabilize M2, please ensure that any patch >>>> or pull requests indicate that this is for M2 or not. By default >>>> all commits will go to master regardless. >>>> >>> >>> Hi Saul, >>> Nightly build is near finished now. PPC and some non-x86 real >>> hardware >> target building failed. I begin downloading them now and will start QA testing. >> >> Is there somewhere I can check a log of the build errors ? We flipped >> in the >> 2.6.37 kernel and associated tools, but the any hardware targets >> should still be building 2.6.34 and be unaffected. >> >> If it isn't a kernel that failed to build .. then I'm less help :) >> > > For beagleboard, http://autobuilder.pokylinux.org:8010/builders/nightly-release/builds/146/steps/shell_46/logs/stdio/text. > For mpc8315e-rdb, http://autobuilder.pokylinux.org:8010/builders/nightly-release/builds/146/steps/shell_49/logs/stdio/text. Both those boards are building random kernels .. one is building the omap-pm (which is broken) and the other built linux-dummy. So something went wrong with the merge of the new kernel, and could be related to the board compatibility .. I'll have a look. Bruce > >> Cheers, >> >> Bruce >> >>> >>>> Thanks >>>> Sau! >>>> Saul Wold >>>> Yocto Component Wrangler @ Intel >>>> Yocto Project / Poky Build System >>>> >>>> _______________________________________________ >>>> poky mailing list >>>> poky@yoctoproject.org >>>> https://lists.yoctoproject.org/listinfo/poky >>> >>> Best Regards, >>> Jiajun >>> >>> _______________________________________________ >>> poky mailing list >>> poky@yoctoproject.org >>> https://lists.yoctoproject.org/listinfo/poky >>> >> >> >> > > Best Regards, > Jiajun > > > _______________________________________________ > poky mailing list > poky@yoctoproject.org > https://lists.yoctoproject.org/listinfo/poky ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [poky] Milestone 2 Stabilization Branch Created (Resend) @ 2010-12-13 5:05 ` Bruce Ashfield 0 siblings, 0 replies; 11+ messages in thread From: Bruce Ashfield @ 2010-12-13 5:05 UTC (permalink / raw) To: Xu, Jiajun Cc: Yocto Project Discussion, poky@yoctoproject.org, Bruce Ashfield On 10-12-13 12:03 AM, Xu, Jiajun wrote: >> On Sun, Dec 12, 2010 at 9:10 PM, Xu, Jiajun<jiajun.xu@intel.com> wrote: >>>> [Resend with correct mailing lists] >>>> >>>> >>>> Yocto / Poky Folks: >>>> >>>> Thanks to everyone's hard work, we are currently on working getting >>>> the first build of M2 started and available for QA testing on Monday. >>>> >>>> I have pushed out the lastest commit that was pending in the >>>> distro/master area to both master and create a builds/milestone >>>> branch which is where bug fixes for M2 will go. >>>> >>>> There is currently an issue with the PPC Kernel build on this branch >>>> and that is being worked, this may impact getting a PPC build >>>> available by Monday. >>>> >>>> For the next week as we stabilize M2, please ensure that any patch >>>> or pull requests indicate that this is for M2 or not. By default >>>> all commits will go to master regardless. >>>> >>> >>> Hi Saul, >>> Nightly build is near finished now. PPC and some non-x86 real >>> hardware >> target building failed. I begin downloading them now and will start QA testing. >> >> Is there somewhere I can check a log of the build errors ? We flipped >> in the >> 2.6.37 kernel and associated tools, but the any hardware targets >> should still be building 2.6.34 and be unaffected. >> >> If it isn't a kernel that failed to build .. then I'm less help :) >> > > For beagleboard, http://autobuilder.pokylinux.org:8010/builders/nightly-release/builds/146/steps/shell_46/logs/stdio/text. > For mpc8315e-rdb, http://autobuilder.pokylinux.org:8010/builders/nightly-release/builds/146/steps/shell_49/logs/stdio/text. Both those boards are building random kernels .. one is building the omap-pm (which is broken) and the other built linux-dummy. So something went wrong with the merge of the new kernel, and could be related to the board compatibility .. I'll have a look. Bruce > >> Cheers, >> >> Bruce >> >>> >>>> Thanks >>>> Sau! >>>> Saul Wold >>>> Yocto Component Wrangler @ Intel >>>> Yocto Project / Poky Build System >>>> >>>> _______________________________________________ >>>> poky mailing list >>>> poky@yoctoproject.org >>>> https://lists.yoctoproject.org/listinfo/poky >>> >>> Best Regards, >>> Jiajun >>> >>> _______________________________________________ >>> poky mailing list >>> poky@yoctoproject.org >>> https://lists.yoctoproject.org/listinfo/poky >>> >> >> >> > > Best Regards, > Jiajun > > > _______________________________________________ > poky mailing list > poky@yoctoproject.org > https://lists.yoctoproject.org/listinfo/poky ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: Milestone 2 Stabilization Branch Created (Resend) 2010-12-13 5:05 ` [poky] " Bruce Ashfield @ 2010-12-13 6:19 ` Bruce Ashfield -1 siblings, 0 replies; 11+ messages in thread From: Bruce Ashfield @ 2010-12-13 6:19 UTC (permalink / raw) To: Xu, Jiajun; +Cc: Yocto Project Discussion, poky@yoctoproject.org On Mon, Dec 13, 2010 at 12:05 AM, Bruce Ashfield <bruce.ashfield@windriver.com> wrote: > On 10-12-13 12:03 AM, Xu, Jiajun wrote: >>> >>> On Sun, Dec 12, 2010 at 9:10 PM, Xu, Jiajun<jiajun.xu@intel.com> wrote: >>>>> >>>>> [Resend with correct mailing lists] >>>>> >>>>> >>>>> Yocto / Poky Folks: >>>>> >>>>> Thanks to everyone's hard work, we are currently on working getting >>>>> the first build of M2 started and available for QA testing on Monday. >>>>> >>>>> I have pushed out the lastest commit that was pending in the >>>>> distro/master area to both master and create a builds/milestone >>>>> branch which is where bug fixes for M2 will go. >>>>> >>>>> There is currently an issue with the PPC Kernel build on this branch >>>>> and that is being worked, this may impact getting a PPC build >>>>> available by Monday. >>>>> >>>>> For the next week as we stabilize M2, please ensure that any patch >>>>> or pull requests indicate that this is for M2 or not. By default >>>>> all commits will go to master regardless. >>>>> >>>> >>>> Hi Saul, >>>> Nightly build is near finished now. PPC and some non-x86 real >>>> hardware >>> >>> target building failed. I begin downloading them now and will start QA >>> testing. >>> >>> Is there somewhere I can check a log of the build errors ? We flipped >>> in the >>> 2.6.37 kernel and associated tools, but the any hardware targets >>> should still be building 2.6.34 and be unaffected. >>> >>> If it isn't a kernel that failed to build .. then I'm less help :) >>> >> >> For beagleboard, >> http://autobuilder.pokylinux.org:8010/builders/nightly-release/builds/146/steps/shell_46/logs/stdio/text. >> For mpc8315e-rdb, >> http://autobuilder.pokylinux.org:8010/builders/nightly-release/builds/146/steps/shell_49/logs/stdio/text. > > Both those boards are building random kernels .. one is building > the omap-pm (which is broken) and the other built linux-dummy. > > So something went wrong with the merge of the new kernel, and could > be related to the board compatibility .. I'll have a look. I made some changes (patch will be out shortly), they fix the emenlow, and I can easily build the fsl and beagleboard out of the box with the changes in place. Looks like a couple of boards were dropped from the stable kernel recipe in all the chaos. Bruce > > Bruce > >> >>> Cheers, >>> >>> Bruce >>> >>>> >>>>> Thanks >>>>> Sau! >>>>> Saul Wold >>>>> Yocto Component Wrangler @ Intel >>>>> Yocto Project / Poky Build System >>>>> >>>>> _______________________________________________ >>>>> poky mailing list >>>>> poky@yoctoproject.org >>>>> https://lists.yoctoproject.org/listinfo/poky >>>> >>>> Best Regards, >>>> Jiajun >>>> >>>> _______________________________________________ >>>> poky mailing list >>>> poky@yoctoproject.org >>>> https://lists.yoctoproject.org/listinfo/poky >>>> >>> >>> >>> >> >> Best Regards, >> Jiajun >> >> >> _______________________________________________ >> poky mailing list >> poky@yoctoproject.org >> https://lists.yoctoproject.org/listinfo/poky > > -- "Thou shalt not follow the NULL pointer, for chaos and madness await thee at its end" ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [poky] Milestone 2 Stabilization Branch Created (Resend) @ 2010-12-13 6:19 ` Bruce Ashfield 0 siblings, 0 replies; 11+ messages in thread From: Bruce Ashfield @ 2010-12-13 6:19 UTC (permalink / raw) To: Xu, Jiajun Cc: Yocto Project Discussion, poky@yoctoproject.org, Bruce Ashfield On Mon, Dec 13, 2010 at 12:05 AM, Bruce Ashfield <bruce.ashfield@windriver.com> wrote: > On 10-12-13 12:03 AM, Xu, Jiajun wrote: >>> >>> On Sun, Dec 12, 2010 at 9:10 PM, Xu, Jiajun<jiajun.xu@intel.com> wrote: >>>>> >>>>> [Resend with correct mailing lists] >>>>> >>>>> >>>>> Yocto / Poky Folks: >>>>> >>>>> Thanks to everyone's hard work, we are currently on working getting >>>>> the first build of M2 started and available for QA testing on Monday. >>>>> >>>>> I have pushed out the lastest commit that was pending in the >>>>> distro/master area to both master and create a builds/milestone >>>>> branch which is where bug fixes for M2 will go. >>>>> >>>>> There is currently an issue with the PPC Kernel build on this branch >>>>> and that is being worked, this may impact getting a PPC build >>>>> available by Monday. >>>>> >>>>> For the next week as we stabilize M2, please ensure that any patch >>>>> or pull requests indicate that this is for M2 or not. By default >>>>> all commits will go to master regardless. >>>>> >>>> >>>> Hi Saul, >>>> Nightly build is near finished now. PPC and some non-x86 real >>>> hardware >>> >>> target building failed. I begin downloading them now and will start QA >>> testing. >>> >>> Is there somewhere I can check a log of the build errors ? We flipped >>> in the >>> 2.6.37 kernel and associated tools, but the any hardware targets >>> should still be building 2.6.34 and be unaffected. >>> >>> If it isn't a kernel that failed to build .. then I'm less help :) >>> >> >> For beagleboard, >> http://autobuilder.pokylinux.org:8010/builders/nightly-release/builds/146/steps/shell_46/logs/stdio/text. >> For mpc8315e-rdb, >> http://autobuilder.pokylinux.org:8010/builders/nightly-release/builds/146/steps/shell_49/logs/stdio/text. > > Both those boards are building random kernels .. one is building > the omap-pm (which is broken) and the other built linux-dummy. > > So something went wrong with the merge of the new kernel, and could > be related to the board compatibility .. I'll have a look. I made some changes (patch will be out shortly), they fix the emenlow, and I can easily build the fsl and beagleboard out of the box with the changes in place. Looks like a couple of boards were dropped from the stable kernel recipe in all the chaos. Bruce > > Bruce > >> >>> Cheers, >>> >>> Bruce >>> >>>> >>>>> Thanks >>>>> Sau! >>>>> Saul Wold >>>>> Yocto Component Wrangler @ Intel >>>>> Yocto Project / Poky Build System >>>>> >>>>> _______________________________________________ >>>>> poky mailing list >>>>> poky@yoctoproject.org >>>>> https://lists.yoctoproject.org/listinfo/poky >>>> >>>> Best Regards, >>>> Jiajun >>>> >>>> _______________________________________________ >>>> poky mailing list >>>> poky@yoctoproject.org >>>> https://lists.yoctoproject.org/listinfo/poky >>>> >>> >>> >>> >> >> Best Regards, >> Jiajun >> >> >> _______________________________________________ >> poky mailing list >> poky@yoctoproject.org >> https://lists.yoctoproject.org/listinfo/poky > > -- "Thou shalt not follow the NULL pointer, for chaos and madness await thee at its end" ^ permalink raw reply [flat|nested] 11+ messages in thread
end of thread, other threads:[~2010-12-13 6:19 UTC | newest] Thread overview: 11+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2010-12-11 19:44 Milestone 2 Stabilization Branch Created (Resend) Saul Wold 2010-12-13 2:10 ` Xu, Jiajun 2010-12-13 2:10 ` [poky] " Xu, Jiajun 2010-12-13 4:37 ` Bruce Ashfield 2010-12-13 4:37 ` [poky] " Bruce Ashfield 2010-12-13 5:03 ` Xu, Jiajun 2010-12-13 5:03 ` [poky] " Xu, Jiajun 2010-12-13 5:05 ` Bruce Ashfield 2010-12-13 5:05 ` [poky] " Bruce Ashfield 2010-12-13 6:19 ` Bruce Ashfield 2010-12-13 6:19 ` [poky] " Bruce Ashfield
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.