From: nicolas.ferre@atmel.com (Nicolas Ferre)
To: linux-arm-kernel@lists.infradead.org
Subject: Hit BUG_ON in dma-mapping.c:425
Date: Wed, 05 Jan 2011 17:49:12 +0100 [thread overview]
Message-ID: <4D24A108.2080609@atmel.com> (raw)
Hi,
While running mtd_stresstest on a dataflash (atmel_spi
+ mtd_dataflash drivers) I hit the BUG_ON directive that
is at the beginning of ___dma_single_cpu_to_dev() function.
This function is called from the SPI driver that do a
dma_map_single() before DMA operations on the buffer
transmitted from upper layers.
It seems that this address is above "high_memory" limit because
it is allocated by vmalloc (in mtd_stresstest.c:285)...
The question is: where the bug is relying? Is there a
configuration that I must modify in AT91 Linux to be able
to modify this behavior or is this an error in the use of
dma_map_single() in the atmel_spi.c driver?
After searching the web, it seems it is quite common after
2.6.34 kernels... But I cannot figure out what is the issue.
Here is the Oops output:
root at at91sam9m10g45ek:~# insmod ../n/mtd_stresstest.ko dev=3
=================================================
mtd_stresstest: MTD device: 3
mtd_stresstest: MTD device size 4325376, eraseblock size 528, page size 528, count of eraseblocks 8192, pages per eraseblock 1, OOB size 0
mtd_stresstest: doing operations
mtd_stresstest: 0 operations done
kernel BUG at /home/nferre/workspace/linux/linux-2.6-arm/arch/arm/mm/dma-mapping.c:425!
Unable to handle kernel NULL pointer dereference at virtual address 00000000
pgd = c31bc000
[00000000] *pgd=732b1031, *pte=00000000, *ppte=00000000
Internal error: Oops: 817 [#1]
last sysfs file: /sys/devices/platform/atmel-ehci/usb1/1-2/1-2:1.0/host0/target0:0:0/0:0:0:0/block/sda/size
Modules linked in: mtd_stresstest(+)
CPU: 0 Not tainted (2.6.37+ #2)
PC is at __bug+0x1c/0x28
LR is at __bug+0x18/0x28
pc : [<c0030374>] lr : [<c0030370>] psr: 20000093
sp : c3b09df8 ip : 00000200 fp : 00601c00
r10: c4886000 r9 : 00001807 r8 : 74886000
r7 : c38d37a0 r6 : c39660e8 r5 : c3b09ebc r4 : c3b09e98
r3 : 00000000 r2 : c3b09dec r1 : c02ef2c1 r0 : 0000005e
Flags: nzCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment user
Control: 0005317f Table: 731bc000 DAC: 00000015
Process insmod (pid: 1649, stack limit = 0xc3b08270)
Stack: (0xc3b09df8 to 0xc3b0a000)
9de0: ffffffff c0032b1c
9e00: c3b09e98 c01817c4 c3966000 c3b09e3c 00000000 c38d37a0 c3966000 c018070c
9e20: 60000013 c3b09e3c 00000000 c018076c c3b09ebc c0180914 c38d37a0 00000000
9e40: c3b09e40 c3b09e40 c3979e00 00000420 c3b09f2c 00000210 00601c00 c0179ba8
9e60: 00100100 00318e70 c38d37a0 c3979e24 00000000 c3979e00 00000000 00000004
9e80: 73979e00 ffffffff 00000000 00000000 c3b09eb4 c3b09ebc c4886000 00000000
9ea0: 00000210 ffffffff ffffffff 00000000 00000000 c3b09ebc c3b09e90 c3b09e90
9ec0: c3b09eb4 c38d37a0 00000000 c0180ab8 c3b09e3c 00000000 ffffff8d 00000000
9ee0: 00000000 00000000 00000000 00000000 00000000 00001807 00000000 0000601c
9f00: 00318e70 00000420 00001808 bf0034b0 00000420 c3b09f2c c4886000 00000001
9f20: 00000000 00000000 00000000 00000000 0000002e bf0005fc bf003000 00012008
9f40: 00000000 c002cfa8 c3b08000 00000000 00012008 c002740c c035ecf4 00000001
9f60: bf0005fc 00000000 00012008 bf0005fc 00000000 00012008 00011d23 c002cfa8
9f80: 00000000 c0062dec 00012018 00011d23 00012008 00000000 00012008 00020000
9fa0: 00000080 c002ce00 00000000 00012008 00012018 00011d23 00012008 00000001
9fc0: 00000000 00012008 00020000 00000080 bec09efb bec09ef4 00012018 00012008
9fe0: 00000003 bec09c94 00008d77 401c0054 60000010 00012018 657a6973 69657700
[<c0030374>] (__bug+0x1c/0x28) from [<c0032b1c>] (___dma_single_cpu_to_dev+0x34/0x5c)
[<c0032b1c>] (___dma_single_cpu_to_dev+0x34/0x5c) from [<c01817c4>] (atmel_spi_transfer+0xc8/0x1c4)
[<c01817c4>] (atmel_spi_transfer+0xc8/0x1c4) from [<c018070c>] (__spi_async+0x94/0xa0)
[<c018070c>] (__spi_async+0x94/0xa0) from [<c018076c>] (spi_async_locked+0x14/0x2c)
[<c018076c>] (spi_async_locked+0x14/0x2c) from [<c0180914>] (__spi_sync+0x5c/0x9c)
[<c0180914>] (__spi_sync+0x5c/0x9c) from [<c0179ba8>] (dataflash_write+0x180/0x1fc)
[<c0179ba8>] (dataflash_write+0x180/0x1fc) from [<bf0034b0>] (mtd_stresstest_init+0x4b0/0x604 [mtd_stresstest])
[<bf0034b0>] (mtd_stresstest_init+0x4b0/0x604 [mtd_stresstest]) from [<c002740c>] (do_one_initcall+0xcc/0x1a8)
[<c002740c>] (do_one_initcall+0xcc/0x1a8) from [<c0062dec>] (sys_init_module+0x90/0x1a4)
[<c0062dec>] (sys_init_module+0x90/0x1a4) from [<c002ce00>] (ret_fast_syscall+0x0/0x2c)
Code: e59f0010 e1a01003 eb0916de e3a03000 (e5833000)
---[ end trace 0f2f3786a6a31f57 ]---
Segmentation fault
This append on 2.6.37 kernel.
Thanks for your help. Best regards,
--
Nicolas Ferre
WARNING: multiple messages have this Message-ID (diff)
From: Nicolas Ferre <nicolas.ferre@atmel.com>
To: Russell King - ARM Linux <linux@arm.linux.org.uk>,
"'linux-arm-kernel@lists.infradead.org'"
<linux-arm-kernel@lists.infradead.org>,
Linux Kernel list <linux-kernel@vger.kernel.org>
Cc: Andrew Victor <linux@maxim.org.za>,
Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>,
Hong XU <hong.xu@atmel.com>,
Patrice VILCHEZ <patrice.vilchez@atmel.com>
Subject: Hit BUG_ON in dma-mapping.c:425
Date: Wed, 05 Jan 2011 17:49:12 +0100 [thread overview]
Message-ID: <4D24A108.2080609@atmel.com> (raw)
Hi,
While running mtd_stresstest on a dataflash (atmel_spi
+ mtd_dataflash drivers) I hit the BUG_ON directive that
is at the beginning of ___dma_single_cpu_to_dev() function.
This function is called from the SPI driver that do a
dma_map_single() before DMA operations on the buffer
transmitted from upper layers.
It seems that this address is above "high_memory" limit because
it is allocated by vmalloc (in mtd_stresstest.c:285)...
The question is: where the bug is relying? Is there a
configuration that I must modify in AT91 Linux to be able
to modify this behavior or is this an error in the use of
dma_map_single() in the atmel_spi.c driver?
After searching the web, it seems it is quite common after
2.6.34 kernels... But I cannot figure out what is the issue.
Here is the Oops output:
root@at91sam9m10g45ek:~# insmod ../n/mtd_stresstest.ko dev=3
=================================================
mtd_stresstest: MTD device: 3
mtd_stresstest: MTD device size 4325376, eraseblock size 528, page size 528, count of eraseblocks 8192, pages per eraseblock 1, OOB size 0
mtd_stresstest: doing operations
mtd_stresstest: 0 operations done
kernel BUG at /home/nferre/workspace/linux/linux-2.6-arm/arch/arm/mm/dma-mapping.c:425!
Unable to handle kernel NULL pointer dereference at virtual address 00000000
pgd = c31bc000
[00000000] *pgd=732b1031, *pte=00000000, *ppte=00000000
Internal error: Oops: 817 [#1]
last sysfs file: /sys/devices/platform/atmel-ehci/usb1/1-2/1-2:1.0/host0/target0:0:0/0:0:0:0/block/sda/size
Modules linked in: mtd_stresstest(+)
CPU: 0 Not tainted (2.6.37+ #2)
PC is at __bug+0x1c/0x28
LR is at __bug+0x18/0x28
pc : [<c0030374>] lr : [<c0030370>] psr: 20000093
sp : c3b09df8 ip : 00000200 fp : 00601c00
r10: c4886000 r9 : 00001807 r8 : 74886000
r7 : c38d37a0 r6 : c39660e8 r5 : c3b09ebc r4 : c3b09e98
r3 : 00000000 r2 : c3b09dec r1 : c02ef2c1 r0 : 0000005e
Flags: nzCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment user
Control: 0005317f Table: 731bc000 DAC: 00000015
Process insmod (pid: 1649, stack limit = 0xc3b08270)
Stack: (0xc3b09df8 to 0xc3b0a000)
9de0: ffffffff c0032b1c
9e00: c3b09e98 c01817c4 c3966000 c3b09e3c 00000000 c38d37a0 c3966000 c018070c
9e20: 60000013 c3b09e3c 00000000 c018076c c3b09ebc c0180914 c38d37a0 00000000
9e40: c3b09e40 c3b09e40 c3979e00 00000420 c3b09f2c 00000210 00601c00 c0179ba8
9e60: 00100100 00318e70 c38d37a0 c3979e24 00000000 c3979e00 00000000 00000004
9e80: 73979e00 ffffffff 00000000 00000000 c3b09eb4 c3b09ebc c4886000 00000000
9ea0: 00000210 ffffffff ffffffff 00000000 00000000 c3b09ebc c3b09e90 c3b09e90
9ec0: c3b09eb4 c38d37a0 00000000 c0180ab8 c3b09e3c 00000000 ffffff8d 00000000
9ee0: 00000000 00000000 00000000 00000000 00000000 00001807 00000000 0000601c
9f00: 00318e70 00000420 00001808 bf0034b0 00000420 c3b09f2c c4886000 00000001
9f20: 00000000 00000000 00000000 00000000 0000002e bf0005fc bf003000 00012008
9f40: 00000000 c002cfa8 c3b08000 00000000 00012008 c002740c c035ecf4 00000001
9f60: bf0005fc 00000000 00012008 bf0005fc 00000000 00012008 00011d23 c002cfa8
9f80: 00000000 c0062dec 00012018 00011d23 00012008 00000000 00012008 00020000
9fa0: 00000080 c002ce00 00000000 00012008 00012018 00011d23 00012008 00000001
9fc0: 00000000 00012008 00020000 00000080 bec09efb bec09ef4 00012018 00012008
9fe0: 00000003 bec09c94 00008d77 401c0054 60000010 00012018 657a6973 69657700
[<c0030374>] (__bug+0x1c/0x28) from [<c0032b1c>] (___dma_single_cpu_to_dev+0x34/0x5c)
[<c0032b1c>] (___dma_single_cpu_to_dev+0x34/0x5c) from [<c01817c4>] (atmel_spi_transfer+0xc8/0x1c4)
[<c01817c4>] (atmel_spi_transfer+0xc8/0x1c4) from [<c018070c>] (__spi_async+0x94/0xa0)
[<c018070c>] (__spi_async+0x94/0xa0) from [<c018076c>] (spi_async_locked+0x14/0x2c)
[<c018076c>] (spi_async_locked+0x14/0x2c) from [<c0180914>] (__spi_sync+0x5c/0x9c)
[<c0180914>] (__spi_sync+0x5c/0x9c) from [<c0179ba8>] (dataflash_write+0x180/0x1fc)
[<c0179ba8>] (dataflash_write+0x180/0x1fc) from [<bf0034b0>] (mtd_stresstest_init+0x4b0/0x604 [mtd_stresstest])
[<bf0034b0>] (mtd_stresstest_init+0x4b0/0x604 [mtd_stresstest]) from [<c002740c>] (do_one_initcall+0xcc/0x1a8)
[<c002740c>] (do_one_initcall+0xcc/0x1a8) from [<c0062dec>] (sys_init_module+0x90/0x1a4)
[<c0062dec>] (sys_init_module+0x90/0x1a4) from [<c002ce00>] (ret_fast_syscall+0x0/0x2c)
Code: e59f0010 e1a01003 eb0916de e3a03000 (e5833000)
---[ end trace 0f2f3786a6a31f57 ]---
Segmentation fault
This append on 2.6.37 kernel.
Thanks for your help. Best regards,
--
Nicolas Ferre
next reply other threads:[~2011-01-05 16:49 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-01-05 16:49 Nicolas Ferre [this message]
2011-01-05 16:49 ` Hit BUG_ON in dma-mapping.c:425 Nicolas Ferre
2011-01-05 16:55 ` Russell King - ARM Linux
2011-01-05 16:55 ` Russell King - ARM Linux
2011-01-06 10:38 ` Nicolas Ferre
2011-01-06 10:38 ` Nicolas Ferre
2011-01-06 10:38 ` Nicolas Ferre
2011-01-06 11:19 ` Artem Bityutskiy
2011-01-06 11:19 ` Artem Bityutskiy
2011-01-06 11:19 ` Artem Bityutskiy
2011-03-24 8:18 ` Hit BUG_ON in dma-mapping.c:425 (RFC) Nicolas Ferre
2011-03-24 8:18 ` Nicolas Ferre
2011-03-24 8:18 ` Nicolas Ferre
2011-03-24 8:25 ` Russell King - ARM Linux
2011-03-24 8:25 ` Russell King - ARM Linux
2011-03-24 8:25 ` Russell King - ARM Linux
2011-03-24 8:36 ` Artem Bityutskiy
2011-03-24 8:36 ` Artem Bityutskiy
2011-03-24 8:36 ` Artem Bityutskiy
2011-03-24 9:27 ` Russell King - ARM Linux
2011-03-24 9:27 ` Russell King - ARM Linux
2011-03-24 9:27 ` Russell King - ARM Linux
2011-03-24 9:41 ` Russell King - ARM Linux
2011-03-24 9:41 ` Russell King - ARM Linux
2011-03-24 11:08 ` Artem Bityutskiy
2011-03-24 11:08 ` Artem Bityutskiy
2011-03-24 11:08 ` Artem Bityutskiy
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4D24A108.2080609@atmel.com \
--to=nicolas.ferre@atmel.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.