Re: panic in tg3 driver

[Stephen Clark <sclark46@earthlink.net>]

On 01/13/2011 08:12 AM, Stephen Clark wrote:
> On 01/11/2011 10:06 PM, Matt Carlson wrote:
>> lspci -vvv -xxx -s 81:00.0
>
>
>
> Further information - I found these messages in /var/log/messages. It 
> looks
> like after it switched to INTx mode interrupts for other devices were 
> hosed.
>
> Jan 12 08:37:49 localhost kernel: tg3 0000:81:00.0: eth2: No interrupt 
> was gener
> ated using MSI. Switching to INTx mode. Please report this failure to 
> the PCI ma
> intainer and include system chipset information
> Jan 12 08:37:49 localhost kernel: ADDRCONF(NETDEV_UP): eth2: link is 
> not ready
> Jan 12 08:38:50 localhost kernel: ata2: lost interrupt (Status 0x50)
> Jan 12 08:38:50 localhost kernel: ata2.01: exception Emask 0x0 SAct 
> 0x0 SErr 0x0
>  action 0x6 frozen
> Jan 12 08:38:50 localhost kernel: ata2.01: failed command: WRITE DMA
> Jan 12 08:38:50 localhost kernel: ata2.01: cmd 
> ca/00:08:e0:bc:51/00:00:00:00:00/f0 tag 0 dma 4096 out
> Jan 12 08:38:50 localhost kernel:          res 
> 40/00:01:00:4f:c2/00:00:00:00:00/b0 Emask 0x4 (timeout)
> Jan 12 08:38:50 localhost kernel: ata2.01: status: { DRDY }
> Jan 12 08:38:50 localhost kernel: ata2: soft resetting link
> Jan 12 08:38:50 localhost kernel: do_IRQ: 0.64 No irq handler for 
> vector (irq -1)
> Jan 12 08:38:50 localhost kernel: ata2.01: configured for UDMA/33
> Jan 12 08:38:54 localhost pppd[1983]: No response to 3 echo-requests
> Jan 12 08:39:55 localhost pppoe[1988]: Inactivity timeout... something 
> wicked happened on session 3363 
Just checking to make sure you have everything you need?

Thanks,
Steve