From: Ilya Kogan <ikogan@mythicnet.org>
To: linux-wireless@vger.kernel.org
Subject: Kernel Panic on Associate with brcm80211.
Date: Sun, 16 Jan 2011 14:54:40 -0500 [thread overview]
Message-ID: <4D334D00.4030604@mythicnet.org> (raw)
Hi,
I've solved my issue regarding not being able to get the card to
scan (apparently there was a conflict with acer_wmi). Now that I can get
it to come up, I've discovered the following panic on associate:
[ 80.856072] wlan0: authenticated
[ 80.856175] wlan0: associate with 00:23:69:56:27:b1 (try 1)
[ 80.859729] wlan0: RX AssocResp from 00:23:69:56:27:b1 (capab=0x411
status=0 aid=2)
[ 80.859803] wlan0: associated
[ 80.859877] ieee80211 phy0: Allocated STA 00:23:69:56:27:b1
[ 80.860489] ieee80211 phy0: Inserted STA 00:23:69:56:27:b1
[ 80.860586] ieee80211 phy0: WMM queue=2 aci=0 acm=0 aifs=3 cWmin=15
cWmax=1023 txop=0 uapsd=0
[ 80.860750] ieee80211 phy0: WMM queue=3 aci=1 acm=0 aifs=7 cWmin=15
cWmax=1023 txop=0 uapsd=0
[ 80.860915] ieee80211 phy0: WMM queue=1 aci=2 acm=0 aifs=2 cWmin=7
cWmax=15 txop=94 uapsd=0
[ 80.861080] ieee80211 phy0: WMM queue=0 aci=3 acm=0 aifs=2 cWmin=3
cWmax=7 txop=47 uapsd=0
[ 80.861245] Associated: True
[ 80.861693] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 80.866030] wl0: wlc_d11hdrs_mac80211: AC_BE txop exceeded phylen
159/256 dur 1778/1504
[ 80.875589] wl0: wlc_d11hdrs_mac80211: AC_BE txop exceeded phylen
137/256 dur 1602/1504
[ 80.956792] Intel AES-NI instructions are not detected.
[ 81.022228] padlock: VIA PadLock not detected.
[ 81.103155] wl0: wlc_d11hdrs_mac80211: AC_BE txop exceeded phylen
382/256 dur 3562/1504
[ 81.440181] Kernel panic - not syncing: <3>assertion "!(sdu->cloned)"
failed: file "wlc_mac80211.c", line 5129
[ 81.440185]
[ 81.440352] Pid: 0, comm: swapper Tainted: P
2.6.35-25-debug #43
[ 81.440409] Call Trace:
[ 81.440460] <IRQ> [<ffffffff815ad3c7>] panic+0x90/0x118
[ 81.440586] [<ffffffffa06fb876>] osl_assert+0xb6/0x170 [brcm80211]
[ 81.440665] [<ffffffffa074a238>] ? dma64_txfast+0xd8/0x3e0 [brcm80211]
[ 81.440740] [<ffffffffa0707833>] ? wlc_txfifo+0xb3/0x180 [brcm80211]
[ 81.440815] [<ffffffffa0707997>] ? wlc_send_q+0x97/0x230 [brcm80211]
[ 81.440889] [<ffffffffa070364f>] ? wlc_prec_enq_head+0xdf/0x260
[brcm80211]
[ 81.440964] [<ffffffffa070be00>] wlc_sendpkt_mac80211+0x1720/0x2830
[brcm80211]
[ 81.441043] [<ffffffffa07037e1>] ? wlc_prec_enq+0x11/0x20 [brcm80211]
[ 81.441117] [<ffffffffa070bb0f>] ?
wlc_sendpkt_mac80211+0x142f/0x2830 [brcm80211]
[ 81.441193] [<ffffffffa070fbcc>] ? wl_ops_tx+0x2c/0xa0 [brcm80211]
[ 81.441252] [<ffffffff812dd1e4>] ? do_raw_spin_lock+0x54/0x150
[ 81.441327] [<ffffffffa070fbee>] wl_ops_tx+0x4e/0xa0 [brcm80211]
[ 81.441404] [<ffffffffa06a15e7>] __ieee80211_tx+0x147/0x230 [mac80211]
[ 81.441479] [<ffffffffa06a0f56>] ?
ieee80211_tx_h_calculate_duration+0x56/0x80 [mac80211]
[ 81.441559] [<ffffffffa06a2d9e>] ieee80211_tx+0xfe/0x2e0 [mac80211]
[ 81.441632] [<ffffffffa06a2cde>] ? ieee80211_tx+0x3e/0x2e0 [mac80211]
[ 81.441707] [<ffffffffa06a3062>] ieee80211_xmit+0xe2/0x240 [mac80211]
[ 81.441781] [<ffffffffa06a2f80>] ? ieee80211_xmit+0x0/0x240 [mac80211]
[ 81.441855] [<ffffffffa06a389b>] ?
ieee80211_subif_start_xmit+0x5bb/0x9d0 [mac80211]
[ 81.441935] [<ffffffffa06a368f>]
ieee80211_subif_start_xmit+0x3af/0x9d0 [mac80211]
[ 81.442013] [<ffffffffa06a3827>] ?
ieee80211_subif_start_xmit+0x547/0x9d0 [mac80211]
[ 81.442076] [<ffffffff814a7aae>] ? sock_def_write_space+0x9e/0xd0
[ 81.442132] [<ffffffff814a7a10>] ? sock_def_write_space+0x0/0xd0
[ 81.442189] [<ffffffff814b813a>] dev_hard_start_xmit+0x13a/0x2e0
[ 81.442245] [<ffffffff814d4626>] sch_direct_xmit+0xf6/0x260
[ 81.442300] [<ffffffff814ba7cd>] dev_queue_xmit+0x13d/0x680
[ 81.442360] [<ffffffff814ba6ea>] ? dev_queue_xmit+0x5a/0x680
[ 81.442425] [<ffffffff81098e3d>] ? trace_hardirqs_on+0xd/0x10
[ 81.442482] [<ffffffff8106a547>] ? local_bh_enable_ip+0x97/0xf0
[ 81.442538] [<ffffffff814c3400>] neigh_resolve_output+0x110/0x3e0
[ 81.442595] [<ffffffff8154ce97>] ip6_finish_output2+0x107/0x410
[ 81.442651] [<ffffffff8154e058>] ip6_finish_output+0x98/0x150
[ 81.442707] [<ffffffff8154e1a8>] ip6_output+0x98/0x1b0
[ 81.442763] [<ffffffff81562b03>] ndisc_send_skb+0x303/0x3c0
[ 81.442819] [<ffffffff815628b2>] ? ndisc_send_skb+0xb2/0x3c0
[ 81.442875] [<ffffffff81562c21>] __ndisc_send+0x61/0x80
[ 81.442931] [<ffffffff81553fb0>] ? addrconf_dad_timer+0x0/0x190
[ 81.442989] [<ffffffff81563442>] ndisc_send_ns+0x72/0xc0
[ 81.443044] [<ffffffff81553fb0>] ? addrconf_dad_timer+0x0/0x190
[ 81.443099] [<ffffffff81553fb0>] ? addrconf_dad_timer+0x0/0x190
[ 81.443154] [<ffffffff815540f0>] addrconf_dad_timer+0x140/0x190
[ 81.443212] [<ffffffff810725c4>] call_timer_fn+0x84/0x180
[ 81.443267] [<ffffffff81072540>] ? call_timer_fn+0x0/0x180
[ 81.443323] [<ffffffff81553fb0>] ? addrconf_dad_timer+0x0/0x190
[ 81.443378] [<ffffffff8107320c>] run_timer_softirq+0x14c/0x260
[ 81.443435] [<ffffffff8102b5fd>] ? lapic_next_event+0x1d/0x30
[ 81.443491] [<ffffffff81069c23>] __do_softirq+0xd3/0x220
[ 81.443548] [<ffffffff81087080>] ? hrtimer_interrupt+0x140/0x250
[ 81.443605] [<ffffffff8100c05c>] call_softirq+0x1c/0x30
[ 81.443659] [<ffffffff8100db9d>] do_softirq+0x9d/0xd0
[ 81.443716] [<ffffffff810697e5>] irq_exit+0x95/0xa0
[ 81.443771] [<ffffffff815b8970>] smp_apic_timer_interrupt+0x70/0x9b
[ 81.443827] [<ffffffff8100bb13>] apic_timer_interrupt+0x13/0x20
[ 81.443880] <EOI> [<ffffffff810141dd>] ? default_idle+0x3d/0xa0
[ 81.443983] [<ffffffff810371ab>] ? native_safe_halt+0xb/0x10
[ 81.444041] [<ffffffff81098e3d>] ? trace_hardirqs_on+0xd/0x10
[ 81.444097] [<ffffffff810141e2>] default_idle+0x42/0xa0
[ 81.444152] [<ffffffff810142da>] c1e_idle+0x9a/0x130
[ 81.444208] [<ffffffff81009da8>] cpu_idle+0xb8/0x110
[ 81.444264] [<ffffffff815964bf>] rest_init+0xcf/0xe0
[ 81.444319] [<ffffffff815963f0>] ? rest_init+0x0/0xe0
[ 81.444375] [<ffffffff81afdcbe>] start_kernel+0x3aa/0x3b3
[ 81.444440] [<ffffffff81afd341>] x86_64_start_reservations+0x12c/0x130
[ 81.444504] [<ffffffff81afd43f>] x86_64_start_kernel+0xfa/0x109
Kernel is: Linux Lulzer 2.6.35-25-debug #43 SMP Sat Jan 15 22:29:10 EST
2011 x86_64 GNU/Linux
Card is: 06:00.0 Network controller [0280]: Broadcom Corporation
BCM43225 802.11b/g/n [14e4:4357] (rev 01)
Module is: [ 78.955414] wl0: Broadcom BCM43xx 802.11 MAC80211 Driver
(1.82.8.0) (Compiled at 01:50:33 on Jan 16 2011)
This is based on the latest compat-wireless git revision as of the
module compile date.
Thanks,
-- Ilya Kogan
next reply other threads:[~2011-01-16 19:54 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-01-16 19:54 Ilya Kogan [this message]
2011-01-18 5:15 ` [PATCH] Kernel Panic on Associate with brcm80211 Ilya Kogan
2011-01-20 11:21 ` zach
2011-01-20 12:23 ` Arend Van Spriel
2011-01-20 13:51 ` Ilya Kogan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4D334D00.4030604@mythicnet.org \
--to=ikogan@mythicnet.org \
--cc=linux-wireless@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.