Re: [Xenomai-help] Problems with rt_task_create and rt_task_join

Re: [Xenomai-help] Problems with rt_task_create and rt_task_join

[Michel Rinaldi]

[-- Attachment #1: Type: text/plain, Size: 1706 bytes --]


----- Messaggio originale ----- 
Da: "Gilles Chanteperdrix" <gilles.chanteperdrix@xenomai.org> 
A: "Michel Rinaldi" <automation.03@domain.hid> 
Cc: xenomai@xenomai.org
Inviato: Lunedì, 24 gennaio 2011 17:54:51 GMT +01:00 Amsterdam/Berlino/Berna/Roma/Stoccolma/Vienna 
Oggetto: Re: [Xenomai-help] Problems with rt_task_create and rt_task_join 


>Ok. Sorry, the rt_sem_p is actually waiting for the semaphore. So, for 
>it to take a long time, the kernel module would have to post it all the 
>time. In the kernel module, you should check rtdm_task_wait_period 
>return value. 
> 
>Anyway, what I said still stands: if we suspect the application of being 
>the culprit, we should try and run a system without this application 
>first. That is, only latency and some non real-time load. 

I run a latency test for about 2 hours, in concomitance with two 
dd if=/dev/zero of=/dev/null 
commands and some sporadic ssh big file transfers. Last row in test output was: 

RTD| 6.546| 7.191| 10.346| 0| 0| 1.101| 29.508 

Maximum latencies was obtained during file transfers. 
With this result I think that I could assert that Xenomai works properly on my system, is right? 

In facts, same test (only without file transfer) under another system with 1GHz Intel Atom on a SCH (Poulsbo) chipset (not supported by Xenomai to disable SMIs) reports these results: 

RTD| 11.353| 13.808| 31.264| 3| 0| 2.934| 231.539 

I think high latencies are due to SMIs. 
By the way, is there a reason why Xenomai does not disable SMIs on SCH chipsets? 
In past I tried to "patch" smi.c file with SCH identifier, but latency test results make worse instead improve. 

Thank you again 
Mauro 

[-- Attachment #2: Type: text/html, Size: 1968 bytes --]

Re: [Xenomai-help] Problems with rt_task_create and rt_task_join

[Gilles Chanteperdrix]

Michel Rinaldi wrote:
> ----- Messaggio originale ----- 
> Da: "Gilles Chanteperdrix" <gilles.chanteperdrix@xenomai.org> 
> A: "Michel Rinaldi" <automation.03@domain.hid> 
> Cc: xenomai@xenomai.org
> Inviato: Lunedì, 24 gennaio 2011 17:54:51 GMT +01:00 Amsterdam/Berlino/Berna/Roma/Stoccolma/Vienna 
> Oggetto: Re: [Xenomai-help] Problems with rt_task_create and rt_task_join 
> 
> 
>> Ok. Sorry, the rt_sem_p is actually waiting for the semaphore. So, for 
>> it to take a long time, the kernel module would have to post it all the 
>> time. In the kernel module, you should check rtdm_task_wait_period 
>> return value. 
>>
>> Anyway, what I said still stands: if we suspect the application of being 
>> the culprit, we should try and run a system without this application 
>> first. That is, only latency and some non real-time load. 
> 
> I run a latency test for about 2 hours, in concomitance with two 
> dd if=/dev/zero of=/dev/null 
> commands and some sporadic ssh big file transfers. Last row in test output was: 
> 
> RTD| 6.546| 7.191| 10.346| 0| 0| 1.101| 29.508 
> 
> Maximum latencies was obtained during file transfers. 
> With this result I think that I could assert that Xenomai works properly on my system, is right? 

Well, no. dd if=/dev/zero of=/dev/null is far from being a proper load.
What you should do is at least to create some disk and network activity,
continuously. And the ideal, is to run the LTP test in parallel. If you
can not, then at least run hackbench in a loop. All this during several
hours.

> 
> In facts, same test (only without file transfer) under another system with 1GHz Intel Atom on a SCH (Poulsbo) chipset (not supported by Xenomai to disable SMIs) reports these results: 
> 
> RTD| 11.353| 13.808| 31.264| 3| 0| 2.934| 231.539 
> 
> I think high latencies are due to SMIs. 
> By the way, is there a reason why Xenomai does not disable SMIs on SCH chipsets? 

We add ids to the smi.c table when people send patches, and report that
the workaround... works. Anyway, if you suspect that the ICH workaround
does not work with SCH chipsets, you should have a look at the SCH
chipsets datasheet, to check whether the method for disabling SMIs is
the same.

What I do not understand, in on which system you get the issue with your
test application. If you want to know if the system on which you run the
test has an isssue, then surely you should test this system, not another...

-- 
                                                                Gilles.

Re: [Xenomai-help] Problems with rt_task_create and rt_task_join

[Mauro Salvini]

[-- Attachment #1: Type: text/plain, Size: 783 bytes --]

> Well, looking at the code, this should not happen. The question is: how 
> do you ensure, in the code that calls rt_task_join, that the thread 
> being created had the time to call rt_task_shadow? In other words, are 
> you sure that you are not passing rt_task_join an uninitialized RT_TASK? 

> So, as usual, we are missing a simple standalone test showing the issue 
> you have. 

There was a subtle bug that realizes exactly what you explained, thank you! 
Question is: after a successful rt_task_shadow() call done by a pthread, we can forget that this rt-task 
was created as pthread and then we must handle it with rt_task_* procedures, is it right? 
In other words, does pthread become a RT_TASK at all, as if it was created with rt_task_create()? 

Thanks again, Gilles. 

[-- Attachment #2: Type: text/html, Size: 999 bytes --]

Re: [Xenomai-help] Problems with rt_task_create and rt_task_join

[Gilles Chanteperdrix]

Mauro Salvini wrote:
>> Well, looking at the code, this should not happen. The question is:
>> how do you ensure, in the code that calls rt_task_join, that the
>> thread being created had the time to call rt_task_shadow? In other
>> words, are you sure that you are not passing rt_task_join an
>> uninitialized RT_TASK?
> 
>> So, as usual, we are missing a simple standalone test showing the
>> issue you have.
> 
> There was a subtle bug that realizes exactly what you explained,
> thank you!

This is not exactly a subtle bug.

> Question is: after a successful rt_task_shadow() call done
> by a pthread, we can forget that this rt-task was created as pthread
> and then we must handle it with rt_task_* procedures, is it right? In
> other words, does pthread become a RT_TASK at all, as if it was
> created with rt_task_create()?

No, an RT_TASK is also a pthread, whether created with rt_task_shadow or
rt_task_create (if you look at src/skins/native/task.c, you will see
that rt_task_create creates a thread with pthread_create which does the
same thing as rt_task_shadow). You saw that rt_task_join was using
pthread_join under the hood. And by the way, rt_task_shadow by itself is
mainly useful for turning the main thread into an RT_TASK, it is simpler
to create other RT_TASKs with rt_task_create.

-- 
					    Gilles.

Re: [Xenomai-help] Problems with rt_task_create and rt_task_join

[Mauro Salvini]

[-- Attachment #1: Type: text/plain, Size: 564 bytes --]

Hello to all, 
finally I found a bug into my code which is not related with join functions. Now all works fine. Thank you for support (and tolerate) me! 

I have one just one last question (another!) to you: 
I create a pthread with joinable attribute, and then I transform it in a realtime ask with rt_task_shadow(). 
When I join this task I must call pthread_join(), because rt_task_join() generates a segmentation fault (in the point where latter function internally calls pthread_join()). 
Is this behaviour correct? 

Thanks again in advance, regards 
Mauro 

[-- Attachment #2: Type: text/html, Size: 753 bytes --]

Re: [Xenomai-help] Problems with rt_task_create and rt_task_join

[Gilles Chanteperdrix]

Mauro Salvini wrote:
> Hello to all, finally I found a bug into my code which is not related
> with join functions. Now all works fine. Thank you for support (and
> tolerate) me!
> 
> I have one just one last question (another!) to you: I create a
> pthread with joinable attribute, and then I transform it in a
> realtime ask with rt_task_shadow().
> When I join this task I must call
> pthread_join(), because rt_task_join() generates a segmentation fault
> (in the point where latter function internally calls pthread_join()).
>  Is this behaviour correct?

Well, looking at the code, this should not happen. The question is: how
do you ensure, in the code that calls rt_task_join, that the thread
being created had the time to call rt_task_shadow? In other words, are
you sure that you are not passing rt_task_join an uninitialized RT_TASK?

So, as usual, we are missing a simple standalone test showing the issue
you have.

-- 
					    Gilles.

Re: [Xenomai-help] Problems with rt_task_create and rt_task_join

[Michel Rinaldi]

[-- Attachment #1: Type: text/plain, Size: 1643 bytes --]

>Posted by Gilles Chanteperdrix on January 27, 2011 - 14:36: 

>Strange, here, the LTP test takes only around 2 hours. Just to be sure: 
>you also generated disk and network activity in parallel to LTP and 
>latency? If yes, then this system has no issue with Xenomai, and the 
>problem you have with your application is in the application itself. 

I launch runltp command with -t flag (which specifies test duration) to run LTP tests for one day. 
I cannot run nettests and disk I/O tests from ltp battery because they require additional features (former requires another linux PC with ltp installed, latter requires floppy and CD player which aren't present 
on my pc). 
So, I create a script that downloads via network a larger (100Mb) file, and create, copy and delete some files on hard disk, all in a while loop, to generate network and disk I/O traffic. 
I re-run ltp and latency test running for 15 hours in parallel with this script also. 
I obtain: 

RTD| 1.081| 8.000| 47.249| 0| 0| 14:58:34/14:58:34 

Now I can assert that my xenomai works grat, I think. 
And then, problems are in my application. 

The only thing that looks me strange is this: with ltp+my_I/O_stress_script+latency tests, I obtain a minimum latency value (1.081) that is more less than ltp+latency only tests (6.182). 
So, lower latency was obtained with higher system load. 
Maybe there's some CPU frequency reductions in act during ltp+latency that isn't active during ltp+latency+my_I/O_stress_script, also if in my kernel configuration CPU frequency stepping was disabled? 
Or what could be happened? 

Thank you very much for your helpfullness, Gilles. 


[-- Attachment #2: Type: text/html, Size: 1884 bytes --]

Re: [Xenomai-help] Problems with rt_task_create and rt_task_join

[Gilles Chanteperdrix]

Michel Rinaldi wrote:
>> Posted by Gilles Chanteperdrix on January 27, 2011 - 14:36:
> 
>> Strange, here, the LTP test takes only around 2 hours. Just to be
>> sure: you also generated disk and network activity in parallel to
>> LTP and latency? If yes, then this system has no issue with
>> Xenomai, and the problem you have with your application is in the
>> application itself.
> 
> I launch runltp command with -t flag (which specifies test duration)
> to run LTP tests for one day. I cannot run nettests and disk I/O
> tests from ltp battery because they require additional features
> (former requires another linux PC with ltp installed, latter requires
> floppy and CD player which aren't present on my pc). So, I create a
> script that downloads via network a larger (100Mb) file, and create,
> copy and delete some files on hard disk, all in a while loop, to
> generate network and disk I/O traffic. I re-run ltp and latency test
> running for 15 hours in parallel with this script also. I obtain:
> 
> RTD| 1.081| 8.000| 47.249| 0| 0| 14:58:34/14:58:34
> 
> Now I can assert that my xenomai works grat, I think. And then,
> problems are in my application.
> 
> The only thing that looks me strange is this: with
> ltp+my_I/O_stress_script+latency tests, I obtain a minimum latency
> value (1.081) that is more less than ltp+latency only tests (6.182).
>  So, lower latency was obtained with higher system load. Maybe
> there's some CPU frequency reductions in act during ltp+latency that
> isn't active during ltp+latency+my_I/O_stress_script, also if in my
> kernel configuration CPU frequency stepping was disabled? Or what
> could be happened?

The minimum path is a question of pure luck. If you are lucky that
everything needed to go from the interrupt to the user-space latency
task is in cache, this path takes a very short time. If you have one
process which occupies cpu for long periods of times without too much
impact on cache, chances are that you will get a lower minimum latency
than if you have many processes switching and thrashing the cache all
the time.

-- 
                                                                Gilles.

Re: [Xenomai-help] Problems with rt_task_create and rt_task_join

[Michel Rinaldi]

[-- Attachment #1: Type: text/plain, Size: 1923 bytes --]

Posted by Gilles Chanteperdrix on January 25, 2011 - 14:27: 

>Well, no. dd if=/dev/zero of=/dev/null is far from being a proper load. 
>What you should do is at least to create some disk and network activity, 
>continuously. And the ideal, is to run the LTP test in parallel. If you 
>can not, then at least run hackbench in a loop. All this during several 
>hours. 

Ok. I run LTP test and latency test in parallel for about 15 hours continuously. 
I have this result at the end: 

RTD| 6.182| 7.627| 47.662| 0| 0| 15:04:32/15:04:32 

I also run hackbench in a loop (with 100 groups) for about 14 hours and I obtain: 

RTD| 6.100| 8.341| 21.727| 0| 0| 13:39:24/13:39:24 

>We add ids to the smi.c table when people send patches, and report that 
>the workaround... works. Anyway, if you suspect that the ICH workaround 
>does not work with SCH chipsets, you should have a look at the SCH 
>chipsets datasheet, to check whether the method for disabling SMIs is 
>the same. 

I'll try to check this and I'll inform you if I succeed in disabling SMIs on SCH. 

>In facts, same test (only without file transfer) under another system with 
>1GHz Intel Atom on a SCH (Poulsbo) chipset (not supported by Xenomai to 
>disable SMIs) reports these results: 
> 
>RTD| 11.353| 13.808| 31.264| 3| 0| 2.934| 231.539 

>What I do not understand, in on which system you get the issue with your 
>test application. If you want to know if the system on which you run the 
>test has an isssue, then surely you should test this system, not another... 

Yes, I run test on this Atom system only to have results from another machine to compare with results from my develop host. 
I'm testing only my develop host, for ease I synthetize again its features: 
Intel Celeron M 600MHz 
512MB ram 
ICH4 chipset (Xenomai's SMI workaround applied) 
Ubuntu 10.04 with compiled kernel 2.6.35.7 
Xenomai 2.5.5.2 
Adeos patch 2.7-04 

Thank you! 
Mauro 


[-- Attachment #2: Type: text/html, Size: 2348 bytes --]

Re: [Xenomai-help] Problems with rt_task_create and rt_task_join

[Gilles Chanteperdrix]

Michel Rinaldi wrote:
> Posted by Gilles Chanteperdrix on January 25, 2011 - 14:27: 
> 
>> Well, no. dd if=/dev/zero of=/dev/null is far from being a proper load. 
>> What you should do is at least to create some disk and network activity, 
>> continuously. And the ideal, is to run the LTP test in parallel. If you 
>> can not, then at least run hackbench in a loop. All this during several 
>> hours. 
> 
> Ok. I run LTP test and latency test in parallel for about 15 hours continuously. 
> I have this result at the end: 
> 
> RTD| 6.182| 7.627| 47.662| 0| 0| 15:04:32/15:04:32 

Strange, here, the LTP test takes only around 2 hours. Just to be sure:
you also generated disk and network activity in parallel to LTP and
latency? If yes, then this system has no issue with Xenomai, and the
problem you have with your application is in the application itself.

-- 
                                                                Gilles.

Re: [Xenomai-help] Problems with rt_task_create and rt_task_join

[Michel Rinaldi]

[-- Attachment #1.1: Type: text/plain, Size: 3301 bytes --]


----- Messaggio originale ----- 
Da: "Gilles Chanteperdrix" <gilles.chanteperdrix@xenomai.org> 
A: "Michel Rinaldi" <automation.03@domain.hid> 
Cc: xenomai@xenomai.org
Inviato: Lunedì, 24 gennaio 2011 15:27:51 GMT +01:00 Amsterdam/Berlino/Berna/Roma/Stoccolma/Vienna 
Oggetto: Re: [Xenomai-help] Problems with rt_task_create and rt_task_join 

..... 

>You explanations are hard to follow and understand, and what is more, 
>ambiguous. Send us a piece of code which allows us to reproduce this 
>issue. Trying to make it as simple as possible. For instance seeing if 
>registering the interrupt causes any difference (if it does not make any 
>difference, then remove it, you get the idea). 

My code is really big and complex to reduce, I'll try to simplify it in next days. 

>As usual, we do not know what version of Xenomai, Adeos, Linux, etc... 
>you are using. See: 
>http://www.xenomai.org/index.php/Request_for_information 

I post them into firts mail of this thread, anyway they are: 
- Linux system with kernel 2.6.35.7 
- Xenomai 2.5.5.2 
- Adeos ipipe patch 2.7-04 
GCC is on version 4.4.3. 

..... 

>That is bad. One more question: what happens when you run the "latency" 
>test, do you get strange results? Also, I see that you have the SMI 
>workaround enabled, does it detect your chipset? 

Yes, as system log says, Xenomai detect SMI motherboard and disable them. 
I run the latency test: without other loads onto system, I observe values like these: 

RTT| 00:00:01 (periodic user-mode task, 100 us period, priority 99) 
RTH|----lat min|----lat avg|----lat max|-overrun|---msw|---lat best|--lat worst 
RTD| 6.680| 7.157| 12.187| 0| 0| 6.680| 12.187 
RTD| 6.277| 6.980| 10.519| 0| 0| 6.277| 12.187 
RTD| 1.175| 7.122| 9.315| 0| 0| 1.175| 12.187 
RTD| 1.578| 7.112| 9.382| 0| 0| 1.175| 12.187 
RTD| 1.635| 7.133| 10.307| 0| 0| 1.175| 12.187 

also after long runnings. 

But if I launch application contained into attached main_app.c file (that represents my simplified application) 
what I observe into latency test is: 

RTD| 1.635| 7.133| 10.307| 0| 0| 1.175| 12.187 
RTD| 1.591| 20.101| 129847.817| 1298| 0| 1.175| 129847.817 
RTD| 1.860| 7.133| 12.814| 1298| 0| 1.175| 129847.817 

Then, if I CTRL+C my app: 

RTD| 2.091| 7.468| 15.687| 1298| 0| 1.175| 129847.817 
RTD| 1.861| 8.397| 8157.893| 1379| 0| 1.175| 129847.817 
RTD| 6.282| 7.287| 15.007| 1379| 0| 1.175| 129847.817 

In concomitance with first very high latency, I observe into dmesg the clocksource switch message. 


In one case I observed an extremely bigger value for lat max: in facts, system freezed for about 2 seconds. 

RTD| 2.091| 7.468| 11.687| 0| 0| 1.133| 20.817 
RTD| 1.436| 254.870|-1819173.554| 24758| 0| 1.133|-1819173.554 
RTD| 1.768| 7.287| 12.007| 24758| 0| 1.133|-1819173.554 

I also observed that during same latency test the first application start generates the longest time in comparison to other starts. 

To run, my app needs kernel module contained into attached timer_module.c file, that signals a semaphore used by app every 1 ms. 
I don't observe some strange variations in latency test values when inserting or removing this kernel module. 

Thank you very much for your help, Gilles. 
Regards 
Mauro 


[-- Attachment #1.2: Type: text/html, Size: 6038 bytes --]

[-- Attachment #2: main_app.c --]
[-- Type: application/octet-stream, Size: 2748 bytes --]

#include <native/task.h>
#include <native/timer.h>
#include <native/sem.h>
#include <native/heap.h>
#include <rtdk.h>

#include <signal.h>
#include <unistd.h>
#include <sys/io.h>
#include <sys/mman.h>
#include <bits/local_lim.h>

#define REQMGR_SHM_NAME             "R_ST_M"
#define REQMGR_STRUCT_SEM_NAME      "R_ST_S"

static unsigned char bBreakReqLoop = 0;
static unsigned char bBreakLoop = 0;

static RT_TASK tMainTask;
static RT_TASK tSchedTask;

static RT_SEM lpTimerSem;
static RT_HEAP main_heap;

typedef struct _tag_ReqStruct
{

   RT_SEM lpStartSem;

   /* .... */

}  ReqStruct;
ReqStruct* lpRequest;

static void SignalHandler ( int signal )
{
   rt_printf("sighandler called\n");
   bBreakReqLoop = 1;
}


void SchedThreadProc ( void *unused )
{
	rt_printf ( "Scheduler thread ready for execution\n" );

      while ( !bBreakLoop )
      {

         rt_sem_p ( &lpTimerSem, TM_INFINITE );

         /* do some work */

      }


   return;
}


int main ( void )
{
	int nRet = 0;

	mlockall ( MCL_CURRENT | MCL_FUTURE );
	
	rt_print_auto_init(1);

	if (rt_task_shadow(&tMainTask,"RTKER",0,0) == 0)
	{
		nRet = rt_sem_bind( &lpTimerSem, "SEMTIM", TM_NONBLOCK);
		if ( nRet == 0 )
		{  

			if (rt_heap_create(&main_heap,REQMGR_SHM_NAME,sizeof(ReqStruct),H_SHARED) == 0)
			{

				nRet = rt_heap_alloc(&main_heap,sizeof(ReqStruct),TM_NONBLOCK,(void **)&lpRequest);
				if ( nRet == 0)
				{

					if (rt_sem_create ( &lpRequest->lpStartSem, REQMGR_STRUCT_SEM_NAME, 0, S_FIFO ) == 0 )
					{

						rt_task_create(&tSchedTask, "SKER_T", 0, 99, T_JOINABLE);

						signal( SIGTERM , SignalHandler );
						signal( SIGINT, SignalHandler );

						rt_task_start(&tSchedTask, SchedThreadProc, NULL);

						rt_printf ( "Request management thread ready for execution\n" );

						while ( !bBreakReqLoop )
						{
							// check semaphore signalling (signalled
							nRet = rt_sem_p_until ( &lpRequest->lpStartSem , 1000000000 );
							if ( nRet == 0 )
							{

								/* work loop */

							}

							rt_task_sleep ( 10000000 );
						} /* end while */

						//Request scheduling thread to exit
						bBreakLoop = 1;

						rt_task_join(&tSchedTask);


						rt_sem_delete ( &lpRequest->lpStartSem );

						rt_heap_delete(&main_heap);

					}
					else
					{
						rt_printf("Semaphore creation error\n");
					}
					rt_heap_free(&main_heap,(void *)&lpRequest);
				}
				else
				{
					rt_printf("Heap alloc error %d\n",nRet);
				}
			}
			else
			{ 
				rt_printf("error creating heap\n");
			}
			rt_sem_unbind(&lpTimerSem);
		}
		else
		{
			rt_printf ("unable to find timer semaphore %d\n",nRet );
		}
	}
	else
	{
		rt_printf("error converting to Xenomai Task\n");
	}

	munlockall ( );
	rt_printf ( "END\n\n" );
	
	return 0;
}

[-- Attachment #3: timer_module.c --]
[-- Type: application/octet-stream, Size: 1176 bytes --]

#include <linux/kernel.h>
#include <linux/module.h>

#include <native/sem.h>
#include <rtdm/rtdm_driver.h>


#define SEM_NAME  "SEMTIM"

#define TIMER_PERIOD_NSEC	1000000

#define PERIODIC_TASK_PRIO	RTDM_TASK_HIGHEST_PRIORITY
#define PERIODIC_TASK_NAME	"T_PER"
#define PERIODIC_STACK_SIZE	8192

MODULE_LICENSE("GPL");
MODULE_DESCRIPTION("Timer module");

static rtdm_task_t tPeriodicTask;

RT_SEM sSchedSem;

static void SwTimerHandler(void* dummy)
{
	
	printk(KERN_INFO "Starting %s\n", __FUNCTION__);
	
	while (1)
	{
	    if( rtdm_task_wait_period() == -ETIMEDOUT ) printk(KERN_WARNING "schedule overrun detected!\n");
		rt_sem_v(&sSchedSem);
	}
}


int init_module (void)
{
	int ErrCode;

	ErrCode = rt_sem_create(&sSchedSem, SEM_NAME, 0, S_FIFO);
	if ( ErrCode != 0)
	{
		printk(KERN_ERR "Error creating main semaphore %d!\n",ErrCode);
	}

	if (rtdm_task_init(&tPeriodicTask, PERIODIC_TASK_NAME, &SwTimerHandler, NULL, PERIODIC_TASK_PRIO, TIMER_PERIOD_NSEC) == 0)
	{
		printk(KERN_INFO "Periodic Thread created!");
	}

	return 0;
}

void cleanup_module (void)
{
	rtdm_task_destroy(&tPeriodicTask);

	rt_sem_delete(&sSchedSem);
	
	printk (KERN_INFO "Timer removed\n" );
}

Re: [Xenomai-help] Problems with rt_task_create and rt_task_join

[Gilles Chanteperdrix]

Michel Rinaldi wrote:
> ----- Messaggio originale ----- 
> Da: "Gilles Chanteperdrix" <gilles.chanteperdrix@xenomai.org> 
> A: "Michel Rinaldi" <automation.03@domain.hid> 
> Cc: xenomai@xenomai.org
> Inviato: Lunedì, 24 gennaio 2011 15:27:51 GMT +01:00 Amsterdam/Berlino/Berna/Roma/Stoccolma/Vienna 
> Oggetto: Re: [Xenomai-help] Problems with rt_task_create and rt_task_join 
> 
> ..... 
> 
>> You explanations are hard to follow and understand, and what is more, 
>> ambiguous. Send us a piece of code which allows us to reproduce this 
>> issue. Trying to make it as simple as possible. For instance seeing if 
>> registering the interrupt causes any difference (if it does not make any 
>> difference, then remove it, you get the idea). 
> 
> My code is really big and complex to reduce, I'll try to simplify it in next days. 
> 
>> As usual, we do not know what version of Xenomai, Adeos, Linux, etc... 
>> you are using. See: 
>> http://www.xenomai.org/index.php/Request_for_information 
> 
> I post them into firts mail of this thread, anyway they are: 
> - Linux system with kernel 2.6.35.7 
> - Xenomai 2.5.5.2 
> - Adeos ipipe patch 2.7-04 
> GCC is on version 4.4.3. 
> 
> ..... 
> 
>> That is bad. One more question: what happens when you run the "latency" 
>> test, do you get strange results? Also, I see that you have the SMI 
>> workaround enabled, does it detect your chipset? 
> 
> Yes, as system log says, Xenomai detect SMI motherboard and disable them. 
> I run the latency test: without other loads onto system, I observe values like these: 
> 
> RTT| 00:00:01 (periodic user-mode task, 100 us period, priority 99) 
> RTH|----lat min|----lat avg|----lat max|-overrun|---msw|---lat best|--lat worst 
> RTD| 6.680| 7.157| 12.187| 0| 0| 6.680| 12.187 
> RTD| 6.277| 6.980| 10.519| 0| 0| 6.277| 12.187 
> RTD| 1.175| 7.122| 9.315| 0| 0| 1.175| 12.187 
> RTD| 1.578| 7.112| 9.382| 0| 0| 1.175| 12.187 
> RTD| 1.635| 7.133| 10.307| 0| 0| 1.175| 12.187 
> 
> also after long runnings. 
> 
> But if I launch application contained into attached main_app.c file (that represents my simplified application) 
> what I observe into latency test is: 

What you observe when you launch your application is irrelevant. The
latency test only makes sense if the the latency test is the only one
running with high priority. So, what you should run is some non-realtime
load.

Also, your application creates a thread with priority 99 using all the
CPU. This is absolutely not what Xenomai is made for. No wonder the
system stops working correctly when you do that.

-- 
                                                                Gilles.

Re: [Xenomai-help] Problems with rt_task_create and rt_task_join

[Gilles Chanteperdrix]

Gilles Chanteperdrix wrote:
> Michel Rinaldi wrote:
>> ----- Messaggio originale ----- 
>> Da: "Gilles Chanteperdrix" <gilles.chanteperdrix@xenomai.org> 
>> A: "Michel Rinaldi" <automation.03@domain.hid> 
>> Cc: xenomai@xenomai.org
>> Inviato: Lunedì, 24 gennaio 2011 15:27:51 GMT +01:00 Amsterdam/Berlino/Berna/Roma/Stoccolma/Vienna 
>> Oggetto: Re: [Xenomai-help] Problems with rt_task_create and rt_task_join 
>>
>> ..... 
>>
>>> You explanations are hard to follow and understand, and what is more, 
>>> ambiguous. Send us a piece of code which allows us to reproduce this 
>>> issue. Trying to make it as simple as possible. For instance seeing if 
>>> registering the interrupt causes any difference (if it does not make any 
>>> difference, then remove it, you get the idea). 
>> My code is really big and complex to reduce, I'll try to simplify it in next days. 
>>
>>> As usual, we do not know what version of Xenomai, Adeos, Linux, etc... 
>>> you are using. See: 
>>> http://www.xenomai.org/index.php/Request_for_information 
>> I post them into firts mail of this thread, anyway they are: 
>> - Linux system with kernel 2.6.35.7 
>> - Xenomai 2.5.5.2 
>> - Adeos ipipe patch 2.7-04 
>> GCC is on version 4.4.3. 
>>
>> ..... 
>>
>>> That is bad. One more question: what happens when you run the "latency" 
>>> test, do you get strange results? Also, I see that you have the SMI 
>>> workaround enabled, does it detect your chipset? 
>> Yes, as system log says, Xenomai detect SMI motherboard and disable them. 
>> I run the latency test: without other loads onto system, I observe values like these: 
>>
>> RTT| 00:00:01 (periodic user-mode task, 100 us period, priority 99) 
>> RTH|----lat min|----lat avg|----lat max|-overrun|---msw|---lat best|--lat worst 
>> RTD| 6.680| 7.157| 12.187| 0| 0| 6.680| 12.187 
>> RTD| 6.277| 6.980| 10.519| 0| 0| 6.277| 12.187 
>> RTD| 1.175| 7.122| 9.315| 0| 0| 1.175| 12.187 
>> RTD| 1.578| 7.112| 9.382| 0| 0| 1.175| 12.187 
>> RTD| 1.635| 7.133| 10.307| 0| 0| 1.175| 12.187 
>>
>> also after long runnings. 
>>
>> But if I launch application contained into attached main_app.c file (that represents my simplified application) 
>> what I observe into latency test is: 
> 
> What you observe when you launch your application is irrelevant. The
> latency test only makes sense if the the latency test is the only one
> running with high priority. So, what you should run is some non-realtime
> load.
> 
> Also, your application creates a thread with priority 99 using all the
> CPU. This is absolutely not what Xenomai is made for. No wonder the
> system stops working correctly when you do that.

Ok. Sorry, the rt_sem_p is actually waiting for the semaphore. So, for
it to take a long time, the kernel module would have to post it all the
time. In the kernel module, you should check rtdm_task_wait_period
return value.

Anyway, what I said still stands: if we suspect the application of being
the culprit, we should try and run a system without this application
first. That is, only latency and some non real-time load.

-- 
                                                                Gilles.

Re: [Xenomai-help] Problems with rt_task_create and rt_task_join

[Michel Rinaldi]

[-- Attachment #1.1: Type: text/plain, Size: 83 bytes --]

Sorry, in previous mail I forgot kernel config attachment. It's here. 

Regards. 


[-- Attachment #1.2: Type: text/html, Size: 260 bytes --]

[-- Attachment #2: .config --]
[-- Type: application/octet-stream, Size: 125217 bytes --]

#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.35.7
# Thu Dec  9 10:47:39 2010
#
# CONFIG_64BIT is not set
CONFIG_X86_32=y
# CONFIG_X86_64 is not set
CONFIG_X86=y
CONFIG_INSTRUCTION_DECODER=y
CONFIG_OUTPUT_FORMAT="elf32-i386"
CONFIG_ARCH_DEFCONFIG="arch/x86/configs/i386_defconfig"
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_MMU=y
CONFIG_ZONE_DMA=y
# CONFIG_NEED_DMA_MAP_STATE is not set
CONFIG_NEED_SG_DMA_LENGTH=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_GPIO=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
# CONFIG_RWSEM_GENERIC_SPINLOCK is not set
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
# CONFIG_GENERIC_TIME_VSYSCALL is not set
CONFIG_ARCH_HAS_CPU_RELAX=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
# CONFIG_HAVE_CPUMASK_OF_CPU_MAP is not set
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_ZONE_DMA32 is not set
CONFIG_ARCH_POPULATES_NODE_MAP=y
# CONFIG_AUDIT_ARCH is not set
CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_HAVE_EARLY_RES=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_X86_32_LAZY_GS=y
CONFIG_ARCH_HWEIGHT_CFLAGS="-fcall-saved-ecx -fcall-saved-edx"
CONFIG_KTIME_SCALAR=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_CONSTRUCTORS=y

#
# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_CROSS_COMPILE=""
CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_BZIP2=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_HAVE_KERNEL_LZO=y
CONFIG_KERNEL_GZIP=y
# CONFIG_KERNEL_BZIP2 is not set
# CONFIG_KERNEL_LZMA is not set
# CONFIG_KERNEL_LZO is not set
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
CONFIG_TASKSTATS=y
# CONFIG_TASK_DELAY_ACCT is not set
CONFIG_TASK_XACCT=y
CONFIG_TASK_IO_ACCOUNTING=y
CONFIG_AUDIT=y
CONFIG_AUDITSYSCALL=y
CONFIG_AUDIT_TREE=y

#
# RCU Subsystem
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=17
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
CONFIG_CGROUPS=y
# CONFIG_CGROUP_DEBUG is not set
CONFIG_CGROUP_NS=y
CONFIG_CGROUP_FREEZER=y
CONFIG_CGROUP_DEVICE=y
CONFIG_CPUSETS=y
CONFIG_PROC_PID_CPUSET=y
CONFIG_CGROUP_CPUACCT=y
CONFIG_RESOURCE_COUNTERS=y
CONFIG_CGROUP_MEM_RES_CTLR=y
CONFIG_CGROUP_MEM_RES_CTLR_SWAP=y
CONFIG_CGROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
CONFIG_RT_GROUP_SCHED=y
# CONFIG_BLK_CGROUP is not set
CONFIG_MM_OWNER=y
# CONFIG_SYSFS_DEPRECATED_V2 is not set
CONFIG_RELAY=y
CONFIG_NAMESPACES=y
CONFIG_UTS_NS=y
CONFIG_IPC_NS=y
CONFIG_USER_NS=y
CONFIG_PID_NS=y
CONFIG_NET_NS=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_RD_GZIP=y
CONFIG_RD_BZIP2=y
CONFIG_RD_LZMA=y
CONFIG_RD_LZO=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_PCSPKR_PLATFORM=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_HAVE_PERF_EVENTS=y

#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
CONFIG_PERF_COUNTERS=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
# CONFIG_COMPAT_BRK is not set
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
CONFIG_PROFILING=y
CONFIG_TRACEPOINTS=y
CONFIG_OPROFILE=m
# CONFIG_OPROFILE_EVENT_MULTIPLEX is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_KPROBES=y
CONFIG_OPTPROBES=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_KRETPROBES=y
CONFIG_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_OPTPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_ATTRS=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_DMA_API_DEBUG=y
CONFIG_HAVE_HW_BREAKPOINT=y
CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y
CONFIG_HAVE_USER_RETURN_NOTIFIER=y

#
# GCOV-based kernel profiling
#
# CONFIG_GCOV_KERNEL is not set
CONFIG_SLOW_WORK=y
# CONFIG_SLOW_WORK_DEBUG is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
CONFIG_MODVERSIONS=y
CONFIG_MODULE_SRCVERSION_ALL=y
CONFIG_BLOCK=y
CONFIG_LBDAF=y
CONFIG_BLK_DEV_BSG=y
CONFIG_BLK_DEV_INTEGRITY=y

#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
CONFIG_PREEMPT_NOTIFIERS=y
# CONFIG_INLINE_SPIN_TRYLOCK is not set
# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
# CONFIG_INLINE_SPIN_LOCK is not set
# CONFIG_INLINE_SPIN_LOCK_BH is not set
# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
CONFIG_INLINE_SPIN_UNLOCK=y
# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
# CONFIG_INLINE_READ_TRYLOCK is not set
# CONFIG_INLINE_READ_LOCK is not set
# CONFIG_INLINE_READ_LOCK_BH is not set
# CONFIG_INLINE_READ_LOCK_IRQ is not set
# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
CONFIG_INLINE_READ_UNLOCK=y
# CONFIG_INLINE_READ_UNLOCK_BH is not set
CONFIG_INLINE_READ_UNLOCK_IRQ=y
# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
# CONFIG_INLINE_WRITE_TRYLOCK is not set
# CONFIG_INLINE_WRITE_LOCK is not set
# CONFIG_INLINE_WRITE_LOCK_BH is not set
# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
CONFIG_INLINE_WRITE_UNLOCK=y
# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
# CONFIG_MUTEX_SPIN_ON_OWNER is not set

#
# Real-time sub-system
#
CONFIG_XENOMAI=y
CONFIG_XENO_GENERIC_STACKPOOL=y
CONFIG_XENO_FASTSYNCH=y
CONFIG_XENO_OPT_NUCLEUS=y
CONFIG_XENO_OPT_PERVASIVE=y
CONFIG_XENO_OPT_PRIOCPL=y
CONFIG_XENO_OPT_PIPELINE_HEAD=y
# CONFIG_XENO_OPT_SCHED_CLASSES is not set
CONFIG_XENO_OPT_PIPE=y
CONFIG_XENO_OPT_PIPE_NRDEV=32
CONFIG_XENO_OPT_REGISTRY_NRSLOTS=512
CONFIG_XENO_OPT_SYS_HEAPSZ=256
CONFIG_XENO_OPT_SYS_STACKPOOLSZ=128
CONFIG_XENO_OPT_SEM_HEAPSZ=12
CONFIG_XENO_OPT_GLOBAL_SEM_HEAPSZ=12
CONFIG_XENO_OPT_STATS=y
# CONFIG_XENO_OPT_DEBUG is not set
# CONFIG_XENO_OPT_SHIRQ is not set

#
# Timing
#
# CONFIG_XENO_OPT_TIMING_PERIODIC is not set
CONFIG_XENO_OPT_TIMING_VIRTICK=1000
CONFIG_XENO_OPT_TIMING_SCHEDLAT=0

#
# Scalability
#
# CONFIG_XENO_OPT_SCALABLE_SCHED is not set
CONFIG_XENO_OPT_TIMER_LIST=y
# CONFIG_XENO_OPT_TIMER_HEAP is not set
# CONFIG_XENO_OPT_TIMER_WHEEL is not set

#
# Machine
#
CONFIG_XENO_HW_FPU=y

#
# NMI watchdog
#

#
# SMI workaround
#
# CONFIG_XENO_HW_SMI_DETECT_DISABLE is not set
CONFIG_XENO_HW_SMI_DETECT=y
CONFIG_XENO_HW_SMI_WORKAROUND=y
CONFIG_XENO_HW_SMI_ALL=y

#
# Interfaces
#
CONFIG_XENO_SKIN_NATIVE=y
CONFIG_XENO_OPT_NATIVE_PERIOD=0
CONFIG_XENO_OPT_NATIVE_PIPE=y
CONFIG_XENO_OPT_NATIVE_PIPE_BUFSZ=1024
CONFIG_XENO_OPT_NATIVE_SEM=y
CONFIG_XENO_OPT_NATIVE_EVENT=y
CONFIG_XENO_OPT_NATIVE_MUTEX=y
CONFIG_XENO_OPT_NATIVE_COND=y
CONFIG_XENO_OPT_NATIVE_QUEUE=y
CONFIG_XENO_OPT_NATIVE_BUFFER=y
CONFIG_XENO_OPT_NATIVE_HEAP=y
CONFIG_XENO_OPT_NATIVE_ALARM=y
CONFIG_XENO_OPT_NATIVE_MPS=y
CONFIG_XENO_OPT_NATIVE_INTR=y
CONFIG_XENO_SKIN_POSIX=y
CONFIG_XENO_OPT_POSIX_PERIOD=0
# CONFIG_XENO_OPT_POSIX_SHM is not set
# CONFIG_XENO_OPT_POSIX_INTR is not set
# CONFIG_XENO_OPT_POSIX_SELECT is not set
# CONFIG_XENO_OPT_DEBUG_POSIX is not set
# CONFIG_XENO_SKIN_PSOS is not set
# CONFIG_XENO_SKIN_UITRON is not set
# CONFIG_XENO_SKIN_VRTX is not set
# CONFIG_XENO_SKIN_VXWORKS is not set
# CONFIG_XENO_SKIN_RTAI is not set
# CONFIG_XENO_OPT_NOWARN_DEPRECATED is not set
CONFIG_XENO_SKIN_RTDM=y
CONFIG_XENO_OPT_RTDM_PERIOD=0
CONFIG_XENO_OPT_RTDM_FILDES=128
# CONFIG_XENO_OPT_RTDM_SELECT is not set

#
# Drivers
#

#
# Serial drivers
#
# CONFIG_XENO_DRIVERS_16550A is not set

#
# Testing drivers
#
# CONFIG_XENO_DRIVERS_TESTING_LEGACY_NAMES is not set
CONFIG_XENO_DRIVERS_TIMERBENCH=y
CONFIG_XENO_DRIVERS_KLATENCY=m
# CONFIG_XENO_DRIVERS_IRQBENCH is not set
CONFIG_XENO_DRIVERS_SWITCHTEST=y
# CONFIG_XENO_DRIVERS_SIGTEST is not set
# CONFIG_XENO_DRIVERS_RTDMTEST is not set

#
# CAN drivers
#
# CONFIG_XENO_DRIVERS_CAN is not set

#
# ANALOGY drivers
#
# CONFIG_XENO_DRIVERS_ANALOGY is not set

#
# Real-time IPC drivers
#
# CONFIG_XENO_DRIVERS_RTIPC is not set
CONFIG_FREEZER=y

#
# Processor type and features
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
# CONFIG_SMP is not set
CONFIG_X86_EXTENDED_PLATFORM=y
# CONFIG_X86_ELAN is not set
# CONFIG_X86_RDC321X is not set
CONFIG_X86_SUPPORTS_MEMORY_FAILURE=y
CONFIG_SCHED_OMIT_FRAME_POINTER=y
CONFIG_NO_BOOTMEM=y
# CONFIG_MEMTEST is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
CONFIG_MPENTIUM4=y
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MGEODE_LX is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_MVIAC7 is not set
# CONFIG_MPSC is not set
# CONFIG_MCORE2 is not set
# CONFIG_MATOM is not set
# CONFIG_GENERIC_CPU is not set
CONFIG_X86_GENERIC=y
CONFIG_X86_CPU=y
CONFIG_X86_INTERNODE_CACHE_SHIFT=7
CONFIG_X86_CMPXCHG=y
CONFIG_X86_L1_CACHE_SHIFT=7
CONFIG_X86_XADD=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_TSC=y
CONFIG_X86_CMPXCHG64=y
CONFIG_X86_CMOV=y
CONFIG_X86_MINIMUM_CPU_FAMILY=5
CONFIG_X86_DEBUGCTLMSR=y
CONFIG_CPU_SUP_INTEL=y
CONFIG_CPU_SUP_CYRIX_32=y
CONFIG_CPU_SUP_AMD=y
CONFIG_CPU_SUP_CENTAUR=y
CONFIG_CPU_SUP_TRANSMETA_32=y
CONFIG_CPU_SUP_UMC_32=y
# CONFIG_HPET_TIMER is not set
CONFIG_DMI=y
# CONFIG_IOMMU_HELPER is not set
# CONFIG_IOMMU_API is not set
CONFIG_NR_CPUS=1
# CONFIG_PREEMPT_NONE is not set
CONFIG_PREEMPT_VOLUNTARY=y
# CONFIG_PREEMPT is not set
CONFIG_IPIPE=y
CONFIG_IPIPE_DOMAINS=4
CONFIG_IPIPE_DELAYED_ATOMICSW=y
# CONFIG_IPIPE_UNMASKED_CONTEXT_SWITCH is not set
CONFIG_HAVE_IPIPE_HOSTRT=y
# CONFIG_X86_UP_APIC is not set
CONFIG_X86_MCE=y
# CONFIG_X86_ANCIENT_MCE is not set
CONFIG_X86_MCE_INJECT=m
CONFIG_VM86=y
# CONFIG_TOSHIBA is not set
CONFIG_I8K=m
CONFIG_X86_REBOOTFIXUPS=y
CONFIG_MICROCODE=m
CONFIG_MICROCODE_INTEL=y
CONFIG_MICROCODE_AMD=y
CONFIG_MICROCODE_OLD_INTERFACE=y
CONFIG_X86_MSR=m
CONFIG_X86_CPUID=m
# CONFIG_NOHIGHMEM is not set
CONFIG_HIGHMEM4G=y
# CONFIG_HIGHMEM64G is not set
CONFIG_PAGE_OFFSET=0xC0000000
CONFIG_HIGHMEM=y
# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ILLEGAL_POINTER_VALUE=0
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_SPARSEMEM_STATIC=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_COMPACTION is not set
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_MMU_NOTIFIER=y
CONFIG_KSM=y
CONFIG_DEFAULT_MMAP_MIN_ADDR=65536
CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y
CONFIG_MEMORY_FAILURE=y
CONFIG_HIGHPTE=y
CONFIG_X86_CHECK_BIOS_CORRUPTION=y
CONFIG_X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK=y
CONFIG_X86_RESERVE_LOW_64K=y
# CONFIG_MATH_EMULATION is not set
CONFIG_MTRR=y
CONFIG_MTRR_SANITIZER=y
CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=0
CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1
CONFIG_X86_PAT=y
CONFIG_ARCH_USES_PG_UNCACHED=y
CONFIG_EFI=y
CONFIG_SECCOMP=y
# CONFIG_CC_STACKPROTECTOR is not set
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
CONFIG_SCHED_HRTICK=y
CONFIG_KEXEC=y
CONFIG_CRASH_DUMP=y
CONFIG_KEXEC_JUMP=y
CONFIG_PHYSICAL_START=0x100000
CONFIG_RELOCATABLE=y
CONFIG_X86_NEED_RELOCS=y
CONFIG_PHYSICAL_ALIGN=0x100000
# CONFIG_COMPAT_VDSO is not set
# CONFIG_CMDLINE_BOOL is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y

#
# Power management and ACPI options
#
CONFIG_PM=y
CONFIG_PM_DEBUG=y
# CONFIG_PM_ADVANCED_DEBUG is not set
# CONFIG_PM_VERBOSE is not set
CONFIG_CAN_PM_TRACE=y
CONFIG_PM_TRACE=y
CONFIG_PM_TRACE_RTC=y
CONFIG_PM_SLEEP=y
CONFIG_SUSPEND_NVS=y
CONFIG_SUSPEND=y
CONFIG_PM_TEST_SUSPEND=y
CONFIG_SUSPEND_FREEZER=y
CONFIG_HIBERNATION=y
CONFIG_PM_STD_PARTITION=""
CONFIG_PM_RUNTIME=y
CONFIG_PM_OPS=y
CONFIG_ACPI=y
CONFIG_ACPI_SLEEP=y
CONFIG_ACPI_PROCFS=y
CONFIG_ACPI_PROCFS_POWER=y
CONFIG_ACPI_POWER_METER=m
CONFIG_ACPI_SYSFS_POWER=y
CONFIG_ACPI_PROC_EVENT=y
CONFIG_ACPI_AC=y
CONFIG_ACPI_BATTERY=y
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_VIDEO=m
CONFIG_ACPI_FAN=y
CONFIG_ACPI_DOCK=y
# CONFIG_ACPI_PROCESSOR is not set
CONFIG_ACPI_CUSTOM_DSDT_FILE=""
# CONFIG_ACPI_CUSTOM_DSDT is not set
CONFIG_ACPI_BLACKLIST_YEAR=2000
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_PCI_SLOT=y
CONFIG_X86_PM_TIMER=y
CONFIG_ACPI_CONTAINER=y
CONFIG_ACPI_SBS=y
# CONFIG_ACPI_HED is not set
# CONFIG_ACPI_APEI is not set
CONFIG_SFI=y
# CONFIG_APM is not set

#
# CPU Frequency scaling
#
# CONFIG_CPU_FREQ is not set
CONFIG_CPU_IDLE=y
CONFIG_CPU_IDLE_GOV_LADDER=y
CONFIG_CPU_IDLE_GOV_MENU=y
# CONFIG_INTEL_IDLE is not set

#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GOMMCONFIG is not set
# CONFIG_PCI_GODIRECT is not set
# CONFIG_PCI_GOOLPC is not set
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
CONFIG_PCI_OLPC=y
CONFIG_PCI_DOMAINS=y
# CONFIG_PCI_CNB20LE_QUIRK is not set
CONFIG_PCIEPORTBUS=y
CONFIG_HOTPLUG_PCI_PCIE=y
CONFIG_PCIEAER=y
# CONFIG_PCIE_ECRC is not set
# CONFIG_PCIEAER_INJECT is not set
# CONFIG_PCIEASPM is not set
CONFIG_PCIE_PME=y
# CONFIG_ARCH_SUPPORTS_MSI is not set
CONFIG_PCI_STUB=m
CONFIG_PCI_IOV=y
CONFIG_PCI_IOAPIC=y
CONFIG_ISA_DMA_API=y
CONFIG_ISA=y
CONFIG_EISA=y
CONFIG_EISA_VLB_PRIMING=y
CONFIG_EISA_PCI_EISA=y
CONFIG_EISA_VIRTUAL_ROOT=y
CONFIG_EISA_NAMES=y
CONFIG_MCA=y
CONFIG_MCA_LEGACY=y
# CONFIG_MCA_PROC_FS is not set
CONFIG_SCx200=m
CONFIG_SCx200HR_TIMER=m
CONFIG_OLPC=y
CONFIG_K8_NB=y
CONFIG_PCCARD=m
CONFIG_PCMCIA=m
CONFIG_PCMCIA_LOAD_CIS=y
CONFIG_CARDBUS=y

#
# PC-card bridges
#
CONFIG_YENTA=m
CONFIG_YENTA_O2=y
CONFIG_YENTA_RICOH=y
CONFIG_YENTA_TI=y
CONFIG_YENTA_ENE_TUNE=y
CONFIG_YENTA_TOSHIBA=y
CONFIG_PD6729=m
CONFIG_I82092=m
CONFIG_I82365=m
CONFIG_TCIC=m
CONFIG_PCMCIA_PROBE=y
CONFIG_PCCARD_NONSTATIC=y
CONFIG_HOTPLUG_PCI=y
CONFIG_HOTPLUG_PCI_FAKE=m
CONFIG_HOTPLUG_PCI_COMPAQ=m
CONFIG_HOTPLUG_PCI_COMPAQ_NVRAM=y
CONFIG_HOTPLUG_PCI_ACPI=m
CONFIG_HOTPLUG_PCI_ACPI_IBM=m
CONFIG_HOTPLUG_PCI_CPCI=y
CONFIG_HOTPLUG_PCI_CPCI_ZT5550=m
CONFIG_HOTPLUG_PCI_CPCI_GENERIC=m
CONFIG_HOTPLUG_PCI_SHPC=m

#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
CONFIG_HAVE_AOUT=y
CONFIG_BINFMT_AOUT=m
CONFIG_BINFMT_MISC=m
CONFIG_HAVE_ATOMIC_IOMAP=y
CONFIG_NET=y

#
# Networking options
#
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_XFRM=y
CONFIG_XFRM_USER=m
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
# CONFIG_XFRM_STATISTICS is not set
CONFIG_XFRM_IPCOMP=m
CONFIG_NET_KEY=m
# CONFIG_NET_KEY_MIGRATE is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_ASK_IP_FIB_HASH=y
# CONFIG_IP_FIB_TRIE is not set
CONFIG_IP_FIB_HASH=y
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_MULTIPATH=y
CONFIG_IP_ROUTE_VERBOSE=y
# CONFIG_IP_PNP is not set
CONFIG_NET_IPIP=m
CONFIG_NET_IPGRE=m
CONFIG_NET_IPGRE_BROADCAST=y
CONFIG_IP_MROUTE=y
# CONFIG_IP_MROUTE_MULTIPLE_TABLES is not set
CONFIG_IP_PIMSM_V1=y
CONFIG_IP_PIMSM_V2=y
# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
CONFIG_INET_XFRM_TUNNEL=m
CONFIG_INET_TUNNEL=m
CONFIG_INET_XFRM_MODE_TRANSPORT=m
CONFIG_INET_XFRM_MODE_TUNNEL=m
CONFIG_INET_XFRM_MODE_BEET=m
CONFIG_INET_LRO=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
CONFIG_TCP_CONG_ADVANCED=y
CONFIG_TCP_CONG_BIC=m
CONFIG_TCP_CONG_CUBIC=y
CONFIG_TCP_CONG_WESTWOOD=m
CONFIG_TCP_CONG_HTCP=m
CONFIG_TCP_CONG_HSTCP=m
CONFIG_TCP_CONG_HYBLA=m
CONFIG_TCP_CONG_VEGAS=m
CONFIG_TCP_CONG_SCALABLE=m
CONFIG_TCP_CONG_LP=m
CONFIG_TCP_CONG_VENO=m
CONFIG_TCP_CONG_YEAH=m
CONFIG_TCP_CONG_ILLINOIS=m
# CONFIG_DEFAULT_BIC is not set
CONFIG_DEFAULT_CUBIC=y
# CONFIG_DEFAULT_HTCP is not set
# CONFIG_DEFAULT_HYBLA is not set
# CONFIG_DEFAULT_VEGAS is not set
# CONFIG_DEFAULT_VENO is not set
# CONFIG_DEFAULT_WESTWOOD is not set
# CONFIG_DEFAULT_RENO is not set
CONFIG_DEFAULT_TCP_CONG="cubic"
CONFIG_TCP_MD5SIG=y
CONFIG_IPV6=y
CONFIG_IPV6_PRIVACY=y
# CONFIG_IPV6_ROUTER_PREF is not set
# CONFIG_IPV6_OPTIMISTIC_DAD is not set
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
# CONFIG_IPV6_MIP6 is not set
CONFIG_INET6_XFRM_TUNNEL=m
CONFIG_INET6_TUNNEL=m
CONFIG_INET6_XFRM_MODE_TRANSPORT=m
CONFIG_INET6_XFRM_MODE_TUNNEL=m
CONFIG_INET6_XFRM_MODE_BEET=m
CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
CONFIG_IPV6_SIT=m
# CONFIG_IPV6_SIT_6RD is not set
CONFIG_IPV6_NDISC_NODETYPE=y
CONFIG_IPV6_TUNNEL=m
CONFIG_IPV6_MULTIPLE_TABLES=y
# CONFIG_IPV6_SUBTREES is not set
# CONFIG_IPV6_MROUTE is not set
CONFIG_NETLABEL=y
CONFIG_NETWORK_SECMARK=y
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
CONFIG_NETFILTER_ADVANCED=y
CONFIG_BRIDGE_NETFILTER=y

#
# Core Netfilter Configuration
#
CONFIG_NETFILTER_NETLINK=m
CONFIG_NETFILTER_NETLINK_QUEUE=m
CONFIG_NETFILTER_NETLINK_LOG=m
CONFIG_NF_CONNTRACK=m
CONFIG_NF_CT_ACCT=y
CONFIG_NF_CONNTRACK_MARK=y
CONFIG_NF_CONNTRACK_SECMARK=y
CONFIG_NF_CONNTRACK_EVENTS=y
CONFIG_NF_CT_PROTO_DCCP=m
CONFIG_NF_CT_PROTO_GRE=m
CONFIG_NF_CT_PROTO_SCTP=m
CONFIG_NF_CT_PROTO_UDPLITE=m
CONFIG_NF_CONNTRACK_AMANDA=m
CONFIG_NF_CONNTRACK_FTP=m
CONFIG_NF_CONNTRACK_H323=m
CONFIG_NF_CONNTRACK_IRC=m
CONFIG_NF_CONNTRACK_NETBIOS_NS=m
CONFIG_NF_CONNTRACK_PPTP=m
CONFIG_NF_CONNTRACK_SANE=m
CONFIG_NF_CONNTRACK_SIP=m
CONFIG_NF_CONNTRACK_TFTP=m
CONFIG_NF_CT_NETLINK=m
CONFIG_NETFILTER_TPROXY=m
CONFIG_NETFILTER_XTABLES=m

#
# Xtables combined modules
#
CONFIG_NETFILTER_XT_MARK=m
CONFIG_NETFILTER_XT_CONNMARK=m

#
# Xtables targets
#
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m
# CONFIG_NETFILTER_XT_TARGET_CT is not set
CONFIG_NETFILTER_XT_TARGET_DSCP=m
CONFIG_NETFILTER_XT_TARGET_HL=m
CONFIG_NETFILTER_XT_TARGET_LED=m
CONFIG_NETFILTER_XT_TARGET_MARK=m
CONFIG_NETFILTER_XT_TARGET_NFLOG=m
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
CONFIG_NETFILTER_XT_TARGET_RATEEST=m
# CONFIG_NETFILTER_XT_TARGET_TEE is not set
CONFIG_NETFILTER_XT_TARGET_TPROXY=m
CONFIG_NETFILTER_XT_TARGET_TRACE=m
CONFIG_NETFILTER_XT_TARGET_SECMARK=m
CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set

#
# Xtables matches
#
CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
CONFIG_NETFILTER_XT_MATCH_COMMENT=m
CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
CONFIG_NETFILTER_XT_MATCH_DCCP=m
CONFIG_NETFILTER_XT_MATCH_DSCP=m
CONFIG_NETFILTER_XT_MATCH_ESP=m
CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
CONFIG_NETFILTER_XT_MATCH_HELPER=m
CONFIG_NETFILTER_XT_MATCH_HL=m
CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
CONFIG_NETFILTER_XT_MATCH_MAC=m
CONFIG_NETFILTER_XT_MATCH_MARK=m
CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
CONFIG_NETFILTER_XT_MATCH_OSF=m
CONFIG_NETFILTER_XT_MATCH_OWNER=m
CONFIG_NETFILTER_XT_MATCH_POLICY=m
CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
CONFIG_NETFILTER_XT_MATCH_QUOTA=m
CONFIG_NETFILTER_XT_MATCH_RATEEST=m
CONFIG_NETFILTER_XT_MATCH_REALM=m
CONFIG_NETFILTER_XT_MATCH_RECENT=m
CONFIG_NETFILTER_XT_MATCH_SCTP=m
CONFIG_NETFILTER_XT_MATCH_SOCKET=m
CONFIG_NETFILTER_XT_MATCH_STATE=m
CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
CONFIG_NETFILTER_XT_MATCH_STRING=m
CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
CONFIG_NETFILTER_XT_MATCH_TIME=m
CONFIG_NETFILTER_XT_MATCH_U32=m
CONFIG_IP_VS=m
CONFIG_IP_VS_IPV6=y
# CONFIG_IP_VS_DEBUG is not set
CONFIG_IP_VS_TAB_BITS=12

#
# IPVS transport protocol load balancing support
#
CONFIG_IP_VS_PROTO_TCP=y
CONFIG_IP_VS_PROTO_UDP=y
CONFIG_IP_VS_PROTO_AH_ESP=y
CONFIG_IP_VS_PROTO_ESP=y
CONFIG_IP_VS_PROTO_AH=y
# CONFIG_IP_VS_PROTO_SCTP is not set

#
# IPVS scheduler
#
CONFIG_IP_VS_RR=m
CONFIG_IP_VS_WRR=m
CONFIG_IP_VS_LC=m
CONFIG_IP_VS_WLC=m
CONFIG_IP_VS_LBLC=m
CONFIG_IP_VS_LBLCR=m
CONFIG_IP_VS_DH=m
CONFIG_IP_VS_SH=m
CONFIG_IP_VS_SED=m
CONFIG_IP_VS_NQ=m

#
# IPVS application helper
#
CONFIG_IP_VS_FTP=m

#
# IP: Netfilter Configuration
#
CONFIG_NF_DEFRAG_IPV4=m
CONFIG_NF_CONNTRACK_IPV4=m
CONFIG_NF_CONNTRACK_PROC_COMPAT=y
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_ADDRTYPE=m
CONFIG_IP_NF_MATCH_AH=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_NF_NAT=m
CONFIG_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_NETMAP=m
CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_NF_NAT_SNMP_BASIC=m
CONFIG_NF_NAT_PROTO_DCCP=m
CONFIG_NF_NAT_PROTO_GRE=m
CONFIG_NF_NAT_PROTO_UDPLITE=m
CONFIG_NF_NAT_PROTO_SCTP=m
CONFIG_NF_NAT_FTP=m
CONFIG_NF_NAT_IRC=m
CONFIG_NF_NAT_TFTP=m
CONFIG_NF_NAT_AMANDA=m
CONFIG_NF_NAT_PPTP=m
CONFIG_NF_NAT_H323=m
CONFIG_NF_NAT_SIP=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_CLUSTERIP=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_TTL=m
CONFIG_IP_NF_RAW=m
CONFIG_IP_NF_SECURITY=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m

#
# IPv6: Netfilter Configuration
#
CONFIG_NF_CONNTRACK_IPV6=m
CONFIG_IP6_NF_QUEUE=m
CONFIG_IP6_NF_IPTABLES=m
CONFIG_IP6_NF_MATCH_AH=m
CONFIG_IP6_NF_MATCH_EUI64=m
CONFIG_IP6_NF_MATCH_FRAG=m
CONFIG_IP6_NF_MATCH_OPTS=m
CONFIG_IP6_NF_MATCH_HL=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
CONFIG_IP6_NF_MATCH_MH=m
CONFIG_IP6_NF_MATCH_RT=m
CONFIG_IP6_NF_TARGET_HL=m
CONFIG_IP6_NF_TARGET_LOG=m
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_MANGLE=m
CONFIG_IP6_NF_RAW=m
CONFIG_IP6_NF_SECURITY=m

#
# DECnet: Netfilter Configuration
#
CONFIG_DECNET_NF_GRABULATOR=m
CONFIG_BRIDGE_NF_EBTABLES=m
CONFIG_BRIDGE_EBT_BROUTE=m
CONFIG_BRIDGE_EBT_T_FILTER=m
CONFIG_BRIDGE_EBT_T_NAT=m
CONFIG_BRIDGE_EBT_802_3=m
CONFIG_BRIDGE_EBT_AMONG=m
CONFIG_BRIDGE_EBT_ARP=m
CONFIG_BRIDGE_EBT_IP=m
CONFIG_BRIDGE_EBT_IP6=m
CONFIG_BRIDGE_EBT_LIMIT=m
CONFIG_BRIDGE_EBT_MARK=m
CONFIG_BRIDGE_EBT_PKTTYPE=m
CONFIG_BRIDGE_EBT_STP=m
CONFIG_BRIDGE_EBT_VLAN=m
CONFIG_BRIDGE_EBT_ARPREPLY=m
CONFIG_BRIDGE_EBT_DNAT=m
CONFIG_BRIDGE_EBT_MARK_T=m
CONFIG_BRIDGE_EBT_REDIRECT=m
CONFIG_BRIDGE_EBT_SNAT=m
CONFIG_BRIDGE_EBT_LOG=m
CONFIG_BRIDGE_EBT_ULOG=m
CONFIG_BRIDGE_EBT_NFLOG=m
CONFIG_IP_DCCP=m
CONFIG_INET_DCCP_DIAG=m

#
# DCCP CCIDs Configuration (EXPERIMENTAL)
#
# CONFIG_IP_DCCP_CCID2_DEBUG is not set
CONFIG_IP_DCCP_CCID3=y
# CONFIG_IP_DCCP_CCID3_DEBUG is not set
CONFIG_IP_DCCP_CCID3_RTO=100
CONFIG_IP_DCCP_TFRC_LIB=y
CONFIG_IP_SCTP=m
# CONFIG_NET_SCTPPROBE is not set
# CONFIG_SCTP_DBG_MSG is not set
# CONFIG_SCTP_DBG_OBJCNT is not set
# CONFIG_SCTP_HMAC_NONE is not set
# CONFIG_SCTP_HMAC_SHA1 is not set
CONFIG_SCTP_HMAC_MD5=y
CONFIG_RDS=m
CONFIG_RDS_RDMA=m
CONFIG_RDS_TCP=m
# CONFIG_RDS_DEBUG is not set
CONFIG_TIPC=m
# CONFIG_TIPC_ADVANCED is not set
# CONFIG_TIPC_DEBUG is not set
CONFIG_ATM=m
CONFIG_ATM_CLIP=m
# CONFIG_ATM_CLIP_NO_ICMP is not set
CONFIG_ATM_LANE=m
CONFIG_ATM_MPOA=m
CONFIG_ATM_BR2684=m
# CONFIG_ATM_BR2684_IPFILTER is not set
# CONFIG_L2TP is not set
CONFIG_STP=m
CONFIG_GARP=m
CONFIG_BRIDGE=m
CONFIG_BRIDGE_IGMP_SNOOPING=y
CONFIG_NET_DSA=y
CONFIG_NET_DSA_TAG_DSA=y
CONFIG_NET_DSA_TAG_EDSA=y
CONFIG_NET_DSA_TAG_TRAILER=y
CONFIG_NET_DSA_MV88E6XXX=y
CONFIG_NET_DSA_MV88E6060=y
CONFIG_NET_DSA_MV88E6XXX_NEED_PPU=y
CONFIG_NET_DSA_MV88E6131=y
CONFIG_NET_DSA_MV88E6123_61_65=y
CONFIG_VLAN_8021Q=m
CONFIG_VLAN_8021Q_GVRP=y
CONFIG_DECNET=m
# CONFIG_DECNET_ROUTER is not set
CONFIG_LLC=y
CONFIG_LLC2=m
CONFIG_IPX=m
# CONFIG_IPX_INTERN is not set
CONFIG_ATALK=m
CONFIG_DEV_APPLETALK=m
CONFIG_LTPC=m
# CONFIG_COPS is not set
CONFIG_IPDDP=m
CONFIG_IPDDP_ENCAP=y
CONFIG_IPDDP_DECAP=y
CONFIG_X25=m
CONFIG_LAPB=m
CONFIG_ECONET=m
CONFIG_ECONET_AUNUDP=y
CONFIG_ECONET_NATIVE=y
CONFIG_WAN_ROUTER=m
CONFIG_PHONET=m
CONFIG_IEEE802154=m
CONFIG_NET_SCHED=y

#
# Queueing/Scheduling
#
CONFIG_NET_SCH_CBQ=m
CONFIG_NET_SCH_HTB=m
CONFIG_NET_SCH_HFSC=m
CONFIG_NET_SCH_ATM=m
CONFIG_NET_SCH_PRIO=m
CONFIG_NET_SCH_MULTIQ=m
CONFIG_NET_SCH_RED=m
CONFIG_NET_SCH_SFQ=m
CONFIG_NET_SCH_TEQL=m
CONFIG_NET_SCH_TBF=m
CONFIG_NET_SCH_GRED=m
CONFIG_NET_SCH_DSMARK=m
CONFIG_NET_SCH_NETEM=m
CONFIG_NET_SCH_DRR=m
CONFIG_NET_SCH_INGRESS=m

#
# Classification
#
CONFIG_NET_CLS=y
CONFIG_NET_CLS_BASIC=m
CONFIG_NET_CLS_TCINDEX=m
CONFIG_NET_CLS_ROUTE4=m
CONFIG_NET_CLS_ROUTE=y
CONFIG_NET_CLS_FW=m
CONFIG_NET_CLS_U32=m
# CONFIG_CLS_U32_PERF is not set
CONFIG_CLS_U32_MARK=y
CONFIG_NET_CLS_RSVP=m
CONFIG_NET_CLS_RSVP6=m
CONFIG_NET_CLS_FLOW=m
CONFIG_NET_CLS_CGROUP=y
CONFIG_NET_EMATCH=y
CONFIG_NET_EMATCH_STACK=32
CONFIG_NET_EMATCH_CMP=m
CONFIG_NET_EMATCH_NBYTE=m
CONFIG_NET_EMATCH_U32=m
CONFIG_NET_EMATCH_META=m
CONFIG_NET_EMATCH_TEXT=m
CONFIG_NET_CLS_ACT=y
CONFIG_NET_ACT_POLICE=m
CONFIG_NET_ACT_GACT=m
CONFIG_GACT_PROB=y
CONFIG_NET_ACT_MIRRED=m
CONFIG_NET_ACT_IPT=m
CONFIG_NET_ACT_NAT=m
CONFIG_NET_ACT_PEDIT=m
CONFIG_NET_ACT_SIMP=m
CONFIG_NET_ACT_SKBEDIT=m
# CONFIG_NET_CLS_IND is not set
CONFIG_NET_SCH_FIFO=y
CONFIG_DCB=y

#
# Network testing
#
CONFIG_NET_PKTGEN=m
CONFIG_NET_TCPPROBE=m
# CONFIG_NET_DROP_MONITOR is not set
CONFIG_HAMRADIO=y

#
# Packet Radio protocols
#
CONFIG_AX25=m
CONFIG_AX25_DAMA_SLAVE=y
CONFIG_NETROM=m
CONFIG_ROSE=m

#
# AX.25 network device drivers
#
CONFIG_MKISS=m
CONFIG_6PACK=m
CONFIG_BPQETHER=m
# CONFIG_DMASCC is not set
CONFIG_SCC=m
# CONFIG_SCC_DELAY is not set
# CONFIG_SCC_TRXECHO is not set
CONFIG_BAYCOM_SER_FDX=m
CONFIG_BAYCOM_SER_HDX=m
CONFIG_BAYCOM_PAR=m
CONFIG_BAYCOM_EPP=m
CONFIG_YAM=m
CONFIG_CAN=m
CONFIG_CAN_RAW=m
CONFIG_CAN_BCM=m

#
# CAN Device Drivers
#
CONFIG_CAN_VCAN=m
CONFIG_CAN_DEV=m
# CONFIG_CAN_CALC_BITTIMING is not set
# CONFIG_CAN_MCP251X is not set
CONFIG_CAN_SJA1000=m
CONFIG_CAN_SJA1000_ISA=m
CONFIG_CAN_SJA1000_PLATFORM=m
CONFIG_CAN_EMS_PCI=m
CONFIG_CAN_KVASER_PCI=m
# CONFIG_CAN_PLX_PCI is not set

#
# CAN USB interfaces
#
CONFIG_CAN_EMS_USB=m
# CONFIG_CAN_DEBUG_DEVICES is not set
CONFIG_IRDA=m

#
# IrDA protocols
#
CONFIG_IRLAN=m
CONFIG_IRNET=m
CONFIG_IRCOMM=m
CONFIG_IRDA_ULTRA=y

#
# IrDA options
#
CONFIG_IRDA_CACHE_LAST_LSAP=y
CONFIG_IRDA_FAST_RR=y
CONFIG_IRDA_DEBUG=y

#
# Infrared-port device drivers
#

#
# SIR device drivers
#
CONFIG_IRTTY_SIR=m

#
# Dongle support
#
CONFIG_DONGLE=y
CONFIG_ESI_DONGLE=m
CONFIG_ACTISYS_DONGLE=m
CONFIG_TEKRAM_DONGLE=m
CONFIG_TOIM3232_DONGLE=m
CONFIG_LITELINK_DONGLE=m
CONFIG_MA600_DONGLE=m
CONFIG_GIRBIL_DONGLE=m
CONFIG_MCP2120_DONGLE=m
CONFIG_OLD_BELKIN_DONGLE=m
CONFIG_ACT200L_DONGLE=m
CONFIG_KINGSUN_DONGLE=m
CONFIG_KSDAZZLE_DONGLE=m
CONFIG_KS959_DONGLE=m

#
# FIR device drivers
#
CONFIG_USB_IRDA=m
CONFIG_SIGMATEL_FIR=m
CONFIG_NSC_FIR=m
CONFIG_WINBOND_FIR=m
CONFIG_TOSHIBA_FIR=m
CONFIG_SMC_IRCC_FIR=m
CONFIG_ALI_FIR=m
CONFIG_VLSI_FIR=m
CONFIG_VIA_FIR=m
CONFIG_MCS_FIR=m
CONFIG_BT=m
CONFIG_BT_L2CAP=m
# CONFIG_BT_L2CAP_EXT_FEATURES is not set
CONFIG_BT_SCO=m
CONFIG_BT_RFCOMM=m
CONFIG_BT_RFCOMM_TTY=y
CONFIG_BT_BNEP=m
CONFIG_BT_BNEP_MC_FILTER=y
CONFIG_BT_BNEP_PROTO_FILTER=y
CONFIG_BT_CMTP=m
CONFIG_BT_HIDP=m

#
# Bluetooth device drivers
#
CONFIG_BT_HCIBTUSB=m
CONFIG_BT_HCIBTSDIO=m
CONFIG_BT_HCIUART=m
CONFIG_BT_HCIUART_H4=y
CONFIG_BT_HCIUART_BCSP=y
CONFIG_BT_HCIUART_LL=y
CONFIG_BT_HCIBCM203X=m
CONFIG_BT_HCIBPA10X=m
CONFIG_BT_HCIBFUSB=m
CONFIG_BT_HCIDTL1=m
CONFIG_BT_HCIBT3C=m
CONFIG_BT_HCIBLUECARD=m
CONFIG_BT_HCIBTUART=m
CONFIG_BT_HCIVHCI=m
CONFIG_BT_MRVL=m
CONFIG_BT_MRVL_SDIO=m
# CONFIG_BT_ATH3K is not set
CONFIG_AF_RXRPC=m
# CONFIG_AF_RXRPC_DEBUG is not set
CONFIG_RXKAD=m
CONFIG_FIB_RULES=y
CONFIG_WIRELESS=y
CONFIG_WIRELESS_EXT=y
CONFIG_WEXT_CORE=y
CONFIG_WEXT_PROC=y
CONFIG_WEXT_SPY=y
CONFIG_WEXT_PRIV=y
CONFIG_CFG80211=m
CONFIG_NL80211_TESTMODE=y
# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
CONFIG_CFG80211_REG_DEBUG=y
CONFIG_CFG80211_DEFAULT_PS=y
CONFIG_CFG80211_DEBUGFS=y
# CONFIG_CFG80211_INTERNAL_REGDB is not set
CONFIG_CFG80211_WEXT=y
CONFIG_WIRELESS_EXT_SYSFS=y
CONFIG_LIB80211=m
CONFIG_LIB80211_CRYPT_WEP=m
CONFIG_LIB80211_CRYPT_CCMP=m
CONFIG_LIB80211_CRYPT_TKIP=m
# CONFIG_LIB80211_DEBUG is not set
CONFIG_MAC80211=m
CONFIG_MAC80211_HAS_RC=y
CONFIG_MAC80211_RC_MINSTREL=y
# CONFIG_MAC80211_RC_DEFAULT_PID is not set
CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
CONFIG_MAC80211_RC_DEFAULT="minstrel"
CONFIG_MAC80211_MESH=y
CONFIG_MAC80211_LEDS=y
CONFIG_MAC80211_DEBUGFS=y
# CONFIG_MAC80211_DEBUG_MENU is not set
CONFIG_WIMAX=m
CONFIG_WIMAX_DEBUG_LEVEL=8
CONFIG_RFKILL=y
CONFIG_RFKILL_LEDS=y
CONFIG_RFKILL_INPUT=y
CONFIG_NET_9P=m
CONFIG_NET_9P_VIRTIO=m
CONFIG_NET_9P_RDMA=m
# CONFIG_NET_9P_DEBUG is not set
# CONFIG_CAIF is not set

#
# Device Drivers
#

#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH=""
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
# CONFIG_STANDALONE is not set
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
CONFIG_FIRMWARE_IN_KERNEL=y
CONFIG_EXTRA_FIRMWARE=""
# CONFIG_SYS_HYPERVISOR is not set
CONFIG_CONNECTOR=y
CONFIG_PROC_EVENTS=y
CONFIG_MTD=m
# CONFIG_MTD_DEBUG is not set
CONFIG_MTD_TESTS=m
CONFIG_MTD_CONCAT=m
CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_REDBOOT_PARTS=m
CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
CONFIG_MTD_AR7_PARTS=m

#
# User Modules And Translation Layers
#
CONFIG_MTD_CHAR=m
CONFIG_HAVE_MTD_OTP=y
CONFIG_MTD_BLKDEVS=m
CONFIG_MTD_BLOCK=m
CONFIG_MTD_BLOCK_RO=m
CONFIG_FTL=m
CONFIG_NFTL=m
CONFIG_NFTL_RW=y
CONFIG_INFTL=m
CONFIG_RFD_FTL=m
CONFIG_SSFDC=m
# CONFIG_SM_FTL is not set
CONFIG_MTD_OOPS=m

#
# RAM/ROM/Flash chip drivers
#
CONFIG_MTD_CFI=m
CONFIG_MTD_JEDECPROBE=m
CONFIG_MTD_GEN_PROBE=m
# CONFIG_MTD_CFI_ADV_OPTIONS is not set
CONFIG_MTD_MAP_BANK_WIDTH_1=y
CONFIG_MTD_MAP_BANK_WIDTH_2=y
CONFIG_MTD_MAP_BANK_WIDTH_4=y
# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
CONFIG_MTD_CFI_I1=y
CONFIG_MTD_CFI_I2=y
# CONFIG_MTD_CFI_I4 is not set
# CONFIG_MTD_CFI_I8 is not set
CONFIG_MTD_CFI_INTELEXT=m
CONFIG_MTD_CFI_AMDSTD=m
CONFIG_MTD_CFI_STAA=m
CONFIG_MTD_CFI_UTIL=m
CONFIG_MTD_RAM=m
CONFIG_MTD_ROM=m
CONFIG_MTD_ABSENT=m

#
# Mapping drivers for chip access
#
CONFIG_MTD_COMPLEX_MAPPINGS=y
CONFIG_MTD_PHYSMAP=m
# CONFIG_MTD_PHYSMAP_COMPAT is not set
CONFIG_MTD_SC520CDP=m
CONFIG_MTD_NETSC520=m
CONFIG_MTD_TS5500=m
CONFIG_MTD_SBC_GXX=m
CONFIG_MTD_SCx200_DOCFLASH=m
CONFIG_MTD_AMD76XROM=m
CONFIG_MTD_ICHXROM=m
CONFIG_MTD_ESB2ROM=m
CONFIG_MTD_CK804XROM=m
CONFIG_MTD_SCB2_FLASH=m
CONFIG_MTD_NETtel=m
CONFIG_MTD_L440GX=m
CONFIG_MTD_PCI=m
# CONFIG_MTD_PCMCIA is not set
CONFIG_MTD_GPIO_ADDR=m
CONFIG_MTD_INTEL_VR_NOR=m
CONFIG_MTD_PLATRAM=m

#
# Self-contained MTD device drivers
#
CONFIG_MTD_PMC551=m
# CONFIG_MTD_PMC551_BUGFIX is not set
# CONFIG_MTD_PMC551_DEBUG is not set
CONFIG_MTD_DATAFLASH=m
# CONFIG_MTD_DATAFLASH_WRITE_VERIFY is not set
CONFIG_MTD_DATAFLASH_OTP=y
CONFIG_MTD_M25P80=m
CONFIG_M25PXX_USE_FAST_READ=y
CONFIG_MTD_SST25L=m
CONFIG_MTD_SLRAM=m
CONFIG_MTD_PHRAM=m
CONFIG_MTD_MTDRAM=m
CONFIG_MTDRAM_TOTAL_SIZE=4096
CONFIG_MTDRAM_ERASE_SIZE=128
CONFIG_MTD_BLOCK2MTD=m

#
# Disk-On-Chip Device Drivers
#
CONFIG_MTD_DOC2000=m
CONFIG_MTD_DOC2001=m
CONFIG_MTD_DOC2001PLUS=m
CONFIG_MTD_DOCPROBE=m
CONFIG_MTD_DOCECC=m
# CONFIG_MTD_DOCPROBE_ADVANCED is not set
CONFIG_MTD_DOCPROBE_ADDRESS=0
CONFIG_MTD_NAND_ECC=m
# CONFIG_MTD_NAND_ECC_SMC is not set
CONFIG_MTD_NAND=m
# CONFIG_MTD_NAND_VERIFY_WRITE is not set
# CONFIG_MTD_SM_COMMON is not set
# CONFIG_MTD_NAND_MUSEUM_IDS is not set
# CONFIG_MTD_NAND_DENALI is not set
CONFIG_MTD_NAND_DENALI_SCRATCH_REG_ADDR=0xFF108018
CONFIG_MTD_NAND_IDS=m
# CONFIG_MTD_NAND_RICOH is not set
CONFIG_MTD_NAND_DISKONCHIP=m
# CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADVANCED is not set
CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS=0
# CONFIG_MTD_NAND_DISKONCHIP_BBTWRITE is not set
CONFIG_MTD_NAND_CAFE=m
CONFIG_MTD_NAND_CS553X=m
CONFIG_MTD_NAND_NANDSIM=m
CONFIG_MTD_NAND_PLATFORM=m
CONFIG_MTD_ALAUDA=m
CONFIG_MTD_ONENAND=m
CONFIG_MTD_ONENAND_VERIFY_WRITE=y
CONFIG_MTD_ONENAND_GENERIC=m
# CONFIG_MTD_ONENAND_OTP is not set
CONFIG_MTD_ONENAND_2X_PROGRAM=y
CONFIG_MTD_ONENAND_SIM=m

#
# LPDDR flash memory drivers
#
CONFIG_MTD_LPDDR=m
CONFIG_MTD_QINFO_PROBE=m

#
# UBI - Unsorted block images
#
CONFIG_MTD_UBI=m
CONFIG_MTD_UBI_WL_THRESHOLD=4096
CONFIG_MTD_UBI_BEB_RESERVE=1
CONFIG_MTD_UBI_GLUEBI=m

#
# UBI debugging options
#
# CONFIG_MTD_UBI_DEBUG is not set
CONFIG_PARPORT=m
CONFIG_PARPORT_PC=m
CONFIG_PARPORT_SERIAL=m
CONFIG_PARPORT_PC_FIFO=y
# CONFIG_PARPORT_PC_SUPERIO is not set
CONFIG_PARPORT_PC_PCMCIA=m
# CONFIG_PARPORT_GSC is not set
CONFIG_PARPORT_AX88796=m
CONFIG_PARPORT_1284=y
CONFIG_PARPORT_NOT_PC=y
CONFIG_PNP=y
CONFIG_PNP_DEBUG_MESSAGES=y

#
# Protocols
#
CONFIG_ISAPNP=y
CONFIG_PNPBIOS=y
CONFIG_PNPBIOS_PROC_FS=y
CONFIG_PNPACPI=y
CONFIG_BLK_DEV=y
CONFIG_BLK_DEV_FD=m
# CONFIG_BLK_DEV_XD is not set
CONFIG_PARIDE=m

#
# Parallel IDE high-level drivers
#
CONFIG_PARIDE_PD=m
CONFIG_PARIDE_PCD=m
CONFIG_PARIDE_PF=m
CONFIG_PARIDE_PT=m
CONFIG_PARIDE_PG=m

#
# Parallel IDE protocol modules
#
CONFIG_PARIDE_ATEN=m
CONFIG_PARIDE_BPCK=m
CONFIG_PARIDE_BPCK6=m
CONFIG_PARIDE_COMM=m
CONFIG_PARIDE_DSTR=m
CONFIG_PARIDE_FIT2=m
CONFIG_PARIDE_FIT3=m
CONFIG_PARIDE_EPAT=m
# CONFIG_PARIDE_EPATC8 is not set
CONFIG_PARIDE_EPIA=m
CONFIG_PARIDE_FRIQ=m
CONFIG_PARIDE_FRPW=m
CONFIG_PARIDE_KBIC=m
CONFIG_PARIDE_KTTI=m
CONFIG_PARIDE_ON20=m
CONFIG_PARIDE_ON26=m
CONFIG_BLK_CPQ_DA=m
CONFIG_BLK_CPQ_CISS_DA=m
CONFIG_CISS_SCSI_TAPE=y
CONFIG_BLK_DEV_DAC960=m
CONFIG_BLK_DEV_UMEM=m
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_CRYPTOLOOP=m
# CONFIG_BLK_DEV_DRBD is not set
CONFIG_BLK_DEV_NBD=m
CONFIG_BLK_DEV_OSD=m
CONFIG_BLK_DEV_SX8=m
# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=65536
# CONFIG_BLK_DEV_XIP is not set
CONFIG_CDROM_PKTCDVD=y
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
CONFIG_ATA_OVER_ETH=m
CONFIG_VIRTIO_BLK=m
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_AD525X_DPOT is not set
CONFIG_IBM_ASM=m
CONFIG_PHANTOM=m
CONFIG_SGI_IOC4=m
CONFIG_TIFM_CORE=m
CONFIG_TIFM_7XX1=m
CONFIG_ICS932S401=m
CONFIG_ENCLOSURE_SERVICES=m
# CONFIG_CS5535_MFGPT is not set
CONFIG_HP_ILO=m
CONFIG_ISL29003=m
CONFIG_SENSORS_TSL2550=m
CONFIG_DS1682=m
# CONFIG_TI_DAC7512 is not set
# CONFIG_VMWARE_BALLOON is not set
CONFIG_C2PORT=m
CONFIG_C2PORT_DURAMAR_2150=m

#
# EEPROM support
#
CONFIG_EEPROM_AT24=m
CONFIG_EEPROM_AT25=m
CONFIG_EEPROM_LEGACY=m
CONFIG_EEPROM_MAX6875=m
CONFIG_EEPROM_93CX6=m
CONFIG_CB710_CORE=m
# CONFIG_CB710_DEBUG is not set
CONFIG_CB710_DEBUG_ASSUMPTIONS=y
CONFIG_IWMC3200TOP=m
# CONFIG_IWMC3200TOP_DEBUG is not set
# CONFIG_IWMC3200TOP_DEBUGFS is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set

#
# SCSI device support
#
CONFIG_SCSI_MOD=y
CONFIG_RAID_ATTRS=m
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
CONFIG_SCSI_TGT=m
CONFIG_SCSI_NETLINK=y
CONFIG_SCSI_PROC_FS=y

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_ST=m
CONFIG_CHR_DEV_OSST=m
CONFIG_BLK_DEV_SR=y
# CONFIG_BLK_DEV_SR_VENDOR is not set
CONFIG_CHR_DEV_SG=y
CONFIG_CHR_DEV_SCH=m
CONFIG_SCSI_ENCLOSURE=m
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
CONFIG_SCSI_SCAN_ASYNC=y
CONFIG_SCSI_WAIT_SCAN=m

#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=m
CONFIG_SCSI_FC_ATTRS=m
CONFIG_SCSI_FC_TGT_ATTRS=y
CONFIG_SCSI_ISCSI_ATTRS=m
CONFIG_SCSI_SAS_ATTRS=m
CONFIG_SCSI_SAS_LIBSAS=m
CONFIG_SCSI_SAS_ATA=y
CONFIG_SCSI_SAS_HOST_SMP=y
# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set
CONFIG_SCSI_SRP_ATTRS=m
CONFIG_SCSI_SRP_TGT_ATTRS=y
CONFIG_SCSI_LOWLEVEL=y
CONFIG_ISCSI_TCP=m
CONFIG_SCSI_CXGB3_ISCSI=m
CONFIG_SCSI_BNX2_ISCSI=m
CONFIG_BE2ISCSI=m
CONFIG_BLK_DEV_3W_XXXX_RAID=m
# CONFIG_SCSI_HPSA is not set
CONFIG_SCSI_3W_9XXX=m
# CONFIG_SCSI_3W_SAS is not set
CONFIG_SCSI_7000FASST=m
CONFIG_SCSI_ACARD=m
CONFIG_SCSI_AHA152X=m
CONFIG_SCSI_AHA1542=m
CONFIG_SCSI_AHA1740=m
CONFIG_SCSI_AACRAID=m
CONFIG_SCSI_AIC7XXX=m
CONFIG_AIC7XXX_CMDS_PER_DEVICE=8
CONFIG_AIC7XXX_RESET_DELAY_MS=15000
CONFIG_AIC7XXX_DEBUG_ENABLE=y
CONFIG_AIC7XXX_DEBUG_MASK=0
CONFIG_AIC7XXX_REG_PRETTY_PRINT=y
# CONFIG_SCSI_AIC7XXX_OLD is not set
CONFIG_SCSI_AIC79XX=m
CONFIG_AIC79XX_CMDS_PER_DEVICE=32
CONFIG_AIC79XX_RESET_DELAY_MS=5000
CONFIG_AIC79XX_DEBUG_ENABLE=y
CONFIG_AIC79XX_DEBUG_MASK=0
CONFIG_AIC79XX_REG_PRETTY_PRINT=y
CONFIG_SCSI_AIC94XX=m
# CONFIG_AIC94XX_DEBUG is not set
CONFIG_SCSI_MVSAS=m
CONFIG_SCSI_MVSAS_DEBUG=y
CONFIG_SCSI_DPT_I2O=m
CONFIG_SCSI_ADVANSYS=m
CONFIG_SCSI_IN2000=m
CONFIG_SCSI_ARCMSR=m
CONFIG_SCSI_ARCMSR_AER=y
CONFIG_MEGARAID_NEWGEN=y
CONFIG_MEGARAID_MM=m
CONFIG_MEGARAID_MAILBOX=m
CONFIG_MEGARAID_LEGACY=m
CONFIG_MEGARAID_SAS=m
CONFIG_SCSI_MPT2SAS=m
CONFIG_SCSI_MPT2SAS_MAX_SGE=128
# CONFIG_SCSI_MPT2SAS_LOGGING is not set
CONFIG_SCSI_HPTIOP=m
CONFIG_SCSI_BUSLOGIC=m
# CONFIG_SCSI_FLASHPOINT is not set
CONFIG_VMWARE_PVSCSI=m
CONFIG_LIBFC=m
CONFIG_LIBFCOE=m
CONFIG_FCOE=m
CONFIG_FCOE_FNIC=m
CONFIG_SCSI_DMX3191D=m
CONFIG_SCSI_DTC3280=m
CONFIG_SCSI_EATA=m
CONFIG_SCSI_EATA_TAGGED_QUEUE=y
CONFIG_SCSI_EATA_LINKED_COMMANDS=y
CONFIG_SCSI_EATA_MAX_TAGS=16
CONFIG_SCSI_FUTURE_DOMAIN=m
CONFIG_SCSI_FD_MCS=m
CONFIG_SCSI_GDTH=m
CONFIG_SCSI_GENERIC_NCR5380=m
CONFIG_SCSI_GENERIC_NCR5380_MMIO=m
CONFIG_SCSI_GENERIC_NCR53C400=y
CONFIG_SCSI_IBMMCA=m
CONFIG_IBMMCA_SCSI_ORDER_STANDARD=y
# CONFIG_IBMMCA_SCSI_DEV_RESET is not set
CONFIG_SCSI_IPS=m
CONFIG_SCSI_INITIO=m
CONFIG_SCSI_INIA100=m
CONFIG_SCSI_PPA=m
CONFIG_SCSI_IMM=m
# CONFIG_SCSI_IZIP_EPP16 is not set
# CONFIG_SCSI_IZIP_SLOW_CTR is not set
CONFIG_SCSI_NCR53C406A=m
CONFIG_SCSI_NCR_D700=m
CONFIG_SCSI_STEX=m
CONFIG_SCSI_SYM53C8XX_2=m
CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
CONFIG_SCSI_SYM53C8XX_MMIO=y
CONFIG_SCSI_IPR=m
# CONFIG_SCSI_IPR_TRACE is not set
# CONFIG_SCSI_IPR_DUMP is not set
CONFIG_SCSI_NCR_Q720=m
CONFIG_SCSI_NCR53C8XX_DEFAULT_TAGS=8
CONFIG_SCSI_NCR53C8XX_MAX_TAGS=4
CONFIG_SCSI_NCR53C8XX_SYNC=5
CONFIG_SCSI_PAS16=m
CONFIG_SCSI_QLOGIC_FAS=m
CONFIG_SCSI_QLOGIC_1280=m
CONFIG_SCSI_QLA_FC=m
CONFIG_SCSI_QLA_ISCSI=m
CONFIG_SCSI_LPFC=m
CONFIG_SCSI_LPFC_DEBUG_FS=y
CONFIG_SCSI_SIM710=m
CONFIG_SCSI_SYM53C416=m
CONFIG_SCSI_DC395x=m
CONFIG_SCSI_DC390T=m
CONFIG_SCSI_T128=m
CONFIG_SCSI_U14_34F=m
CONFIG_SCSI_U14_34F_TAGGED_QUEUE=y
CONFIG_SCSI_U14_34F_LINKED_COMMANDS=y
CONFIG_SCSI_U14_34F_MAX_TAGS=8
CONFIG_SCSI_ULTRASTOR=m
CONFIG_SCSI_NSP32=m
CONFIG_SCSI_DEBUG=m
CONFIG_SCSI_PMCRAID=m
# CONFIG_SCSI_PM8001 is not set
CONFIG_SCSI_SRP=m
CONFIG_SCSI_BFA_FC=m
CONFIG_SCSI_LOWLEVEL_PCMCIA=y
CONFIG_PCMCIA_AHA152X=m
CONFIG_PCMCIA_FDOMAIN=m
CONFIG_PCMCIA_NINJA_SCSI=m
CONFIG_PCMCIA_QLOGIC=m
CONFIG_PCMCIA_SYM53C500=m
CONFIG_SCSI_DH=y
CONFIG_SCSI_DH_RDAC=m
CONFIG_SCSI_DH_HP_SW=m
CONFIG_SCSI_DH_EMC=m
CONFIG_SCSI_DH_ALUA=m
CONFIG_SCSI_OSD_INITIATOR=m
CONFIG_SCSI_OSD_ULD=m
CONFIG_SCSI_OSD_DPRINT_SENSE=1
# CONFIG_SCSI_OSD_DEBUG is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_ATA_VERBOSE_ERROR=y
CONFIG_ATA_ACPI=y
CONFIG_SATA_PMP=y

#
# Controllers with non-SFF native interface
#
CONFIG_SATA_AHCI=m
# CONFIG_SATA_AHCI_PLATFORM is not set
CONFIG_SATA_INIC162X=m
CONFIG_SATA_SIL24=m
CONFIG_ATA_SFF=y

#
# SFF controllers with custom DMA interface
#
CONFIG_PDC_ADMA=y
CONFIG_SATA_QSTOR=m
CONFIG_SATA_SX4=m
CONFIG_ATA_BMDMA=y

#
# SATA SFF controllers with BMDMA
#
CONFIG_ATA_PIIX=y
CONFIG_SATA_MV=m
CONFIG_SATA_NV=m
CONFIG_SATA_PROMISE=m
CONFIG_SATA_SIL=m
CONFIG_SATA_SIS=m
CONFIG_SATA_SVW=m
CONFIG_SATA_ULI=m
CONFIG_SATA_VIA=m
CONFIG_SATA_VITESSE=m

#
# PATA SFF controllers with BMDMA
#
CONFIG_PATA_ALI=m
CONFIG_PATA_AMD=m
CONFIG_PATA_ARTOP=m
CONFIG_PATA_ATIIXP=m
CONFIG_PATA_ATP867X=m
CONFIG_PATA_CMD64X=m
CONFIG_PATA_CS5520=m
CONFIG_PATA_CS5530=m
CONFIG_PATA_CS5535=m
CONFIG_PATA_CS5536=m
CONFIG_PATA_CYPRESS=m
CONFIG_PATA_EFAR=m
CONFIG_PATA_HPT366=m
CONFIG_PATA_HPT37X=m
CONFIG_PATA_HPT3X2N=m
CONFIG_PATA_HPT3X3=m
# CONFIG_PATA_HPT3X3_DMA is not set
CONFIG_PATA_IT8213=m
CONFIG_PATA_IT821X=m
CONFIG_PATA_JMICRON=m
CONFIG_PATA_MARVELL=m
CONFIG_PATA_NETCELL=m
CONFIG_PATA_NINJA32=m
CONFIG_PATA_NS87415=m
CONFIG_PATA_OLDPIIX=m
CONFIG_PATA_OPTIDMA=m
CONFIG_PATA_PDC2027X=m
CONFIG_PATA_PDC_OLD=m
CONFIG_PATA_RADISYS=m
CONFIG_PATA_RDC=m
CONFIG_PATA_SC1200=m
CONFIG_PATA_SCH=m
CONFIG_PATA_SERVERWORKS=m
CONFIG_PATA_SIL680=m
CONFIG_PATA_SIS=y
# CONFIG_PATA_TOSHIBA is not set
CONFIG_PATA_TRIFLEX=m
CONFIG_PATA_VIA=m
CONFIG_PATA_WINBOND=m

#
# PIO-only SFF controllers
#
CONFIG_PATA_CMD640_PCI=m
CONFIG_PATA_ISAPNP=m
CONFIG_PATA_MPIIX=m
CONFIG_PATA_NS87410=m
CONFIG_PATA_OPTI=m
CONFIG_PATA_PCMCIA=m
CONFIG_PATA_QDI=m
CONFIG_PATA_RZ1000=m
CONFIG_PATA_WINBOND_VLB=m

#
# Generic fallback / legacy drivers
#
CONFIG_PATA_ACPI=y
CONFIG_ATA_GENERIC=y
CONFIG_PATA_LEGACY=m
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
CONFIG_MD_AUTODETECT=y
CONFIG_MD_LINEAR=m
CONFIG_MD_RAID0=m
CONFIG_MD_RAID1=m
CONFIG_MD_RAID10=m
CONFIG_MD_RAID456=m
CONFIG_MD_RAID6_PQ=m
CONFIG_ASYNC_RAID6_TEST=m
CONFIG_MD_MULTIPATH=m
CONFIG_MD_FAULTY=m
CONFIG_BLK_DEV_DM=y
# CONFIG_DM_DEBUG is not set
CONFIG_DM_CRYPT=m
CONFIG_DM_SNAPSHOT=y
CONFIG_DM_MIRROR=y
# CONFIG_DM_LOG_USERSPACE is not set
CONFIG_DM_ZERO=m
CONFIG_DM_MULTIPATH=y
CONFIG_DM_MULTIPATH_QL=m
CONFIG_DM_MULTIPATH_ST=m
# CONFIG_DM_DELAY is not set
CONFIG_DM_UEVENT=y
CONFIG_FUSION=y
CONFIG_FUSION_SPI=m
CONFIG_FUSION_FC=m
CONFIG_FUSION_SAS=m
CONFIG_FUSION_MAX_SGE=128
CONFIG_FUSION_CTL=m
CONFIG_FUSION_LAN=m
CONFIG_FUSION_LOGGING=y

#
# IEEE 1394 (FireWire) support
#

#
# You can enable one or both FireWire driver stacks.
#

#
# The newer stack is recommended.
#
CONFIG_FIREWIRE=m
CONFIG_FIREWIRE_OHCI=m
CONFIG_FIREWIRE_OHCI_DEBUG=y
CONFIG_FIREWIRE_SBP2=m
CONFIG_FIREWIRE_NET=m
CONFIG_IEEE1394=m
CONFIG_IEEE1394_OHCI1394=m
CONFIG_IEEE1394_PCILYNX=m
CONFIG_IEEE1394_SBP2=m
# CONFIG_IEEE1394_SBP2_PHYS_DMA is not set
CONFIG_IEEE1394_ETH1394_ROM_ENTRY=y
CONFIG_IEEE1394_ETH1394=m
CONFIG_IEEE1394_RAWIO=m
CONFIG_IEEE1394_VIDEO1394=m
CONFIG_IEEE1394_DV1394=m
# CONFIG_IEEE1394_VERBOSEDEBUG is not set
CONFIG_I2O=m
CONFIG_I2O_LCT_NOTIFY_ON_CHANGES=y
CONFIG_I2O_EXT_ADAPTEC=y
CONFIG_I2O_CONFIG=m
CONFIG_I2O_CONFIG_OLD_IOCTL=y
CONFIG_I2O_BUS=m
CONFIG_I2O_BLOCK=m
CONFIG_I2O_SCSI=m
CONFIG_I2O_PROC=m
CONFIG_MACINTOSH_DRIVERS=y
CONFIG_MAC_EMUMOUSEBTN=y
CONFIG_NETDEVICES=y
CONFIG_IFB=m
CONFIG_DUMMY=m
CONFIG_BONDING=m
CONFIG_MACVLAN=m
# CONFIG_MACVTAP is not set
CONFIG_EQUALIZER=m
CONFIG_TUN=y
CONFIG_VETH=m
CONFIG_NET_SB1000=m
CONFIG_ARCNET=m
CONFIG_ARCNET_1201=m
CONFIG_ARCNET_1051=m
CONFIG_ARCNET_RAW=m
CONFIG_ARCNET_CAP=m
CONFIG_ARCNET_COM90xx=m
CONFIG_ARCNET_COM90xxIO=m
CONFIG_ARCNET_RIM_I=m
CONFIG_ARCNET_COM20020=m
CONFIG_ARCNET_COM20020_ISA=m
CONFIG_ARCNET_COM20020_PCI=m
CONFIG_PHYLIB=y

#
# MII PHY device drivers
#
CONFIG_MARVELL_PHY=y
CONFIG_DAVICOM_PHY=y
CONFIG_QSEMI_PHY=y
CONFIG_LXT_PHY=y
CONFIG_CICADA_PHY=y
CONFIG_VITESSE_PHY=y
CONFIG_SMSC_PHY=y
CONFIG_BROADCOM_PHY=y
CONFIG_ICPLUS_PHY=y
CONFIG_REALTEK_PHY=y
CONFIG_NATIONAL_PHY=y
CONFIG_STE10XP=y
CONFIG_LSI_ET1011C_PHY=y
# CONFIG_MICREL_PHY is not set
CONFIG_FIXED_PHY=y
CONFIG_MDIO_BITBANG=y
CONFIG_MDIO_GPIO=y
CONFIG_NET_ETHERNET=y
CONFIG_MII=m
CONFIG_HAPPYMEAL=m
CONFIG_SUNGEM=m
CONFIG_CASSINI=m
CONFIG_NET_VENDOR_3COM=y
CONFIG_EL1=m
CONFIG_EL2=m
CONFIG_ELPLUS=m
CONFIG_EL16=m
CONFIG_EL3=m
CONFIG_3C515=m
CONFIG_ELMC=m
CONFIG_ELMC_II=m
CONFIG_VORTEX=m
CONFIG_TYPHOON=m
CONFIG_LANCE=m
CONFIG_NET_VENDOR_SMC=y
CONFIG_WD80x3=m
CONFIG_ULTRAMCA=m
CONFIG_ULTRA=m
CONFIG_ULTRA32=m
CONFIG_SMC9194=m
# CONFIG_ENC28J60 is not set
CONFIG_ETHOC=m
CONFIG_NET_VENDOR_RACAL=y
# CONFIG_NI5010 is not set
CONFIG_NI52=m
CONFIG_NI65=m
CONFIG_DNET=m
CONFIG_NET_TULIP=y
CONFIG_DE2104X=m
CONFIG_DE2104X_DSL=0
CONFIG_TULIP=m
# CONFIG_TULIP_MWI is not set
# CONFIG_TULIP_MMIO is not set
# CONFIG_TULIP_NAPI is not set
CONFIG_DE4X5=m
CONFIG_WINBOND_840=m
CONFIG_DM9102=m
CONFIG_ULI526X=m
CONFIG_PCMCIA_XIRCOM=m
CONFIG_AT1700=m
CONFIG_DEPCA=m
CONFIG_HP100=m
CONFIG_NET_ISA=y
CONFIG_E2100=m
CONFIG_EWRK3=m
CONFIG_EEXPRESS=m
CONFIG_EEXPRESS_PRO=m
CONFIG_HPLAN_PLUS=m
CONFIG_HPLAN=m
CONFIG_LP486E=m
CONFIG_ETH16I=m
CONFIG_NE2000=m
CONFIG_ZNET=m
CONFIG_SEEQ8005=m
CONFIG_NE2_MCA=m
CONFIG_IBMLANA=m
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
CONFIG_NET_PCI=y
CONFIG_PCNET32=m
CONFIG_AMD8111_ETH=m
CONFIG_ADAPTEC_STARFIRE=m
CONFIG_AC3200=m
# CONFIG_KSZ884X_PCI is not set
CONFIG_APRICOT=m
CONFIG_B44=m
CONFIG_B44_PCI_AUTOSELECT=y
CONFIG_B44_PCICORE_AUTOSELECT=y
CONFIG_B44_PCI=y
CONFIG_FORCEDETH=m
CONFIG_CS89x0=m
CONFIG_E100=m
CONFIG_LNE390=m
CONFIG_FEALNX=m
CONFIG_NATSEMI=m
CONFIG_NE2K_PCI=m
CONFIG_NE3210=m
CONFIG_ES3210=m
CONFIG_8139CP=m
CONFIG_8139TOO=m
CONFIG_8139TOO_PIO=y
# CONFIG_8139TOO_TUNE_TWISTER is not set
CONFIG_8139TOO_8129=y
# CONFIG_8139_OLD_RX_RESET is not set
# CONFIG_R6040 is not set
CONFIG_SIS900=m
CONFIG_EPIC100=m
CONFIG_SMSC9420=m
CONFIG_SUNDANCE=m
# CONFIG_SUNDANCE_MMIO is not set
CONFIG_TLAN=m
CONFIG_KS8842=m
CONFIG_KS8851=m
CONFIG_KS8851_MLL=m
CONFIG_VIA_RHINE=m
CONFIG_VIA_RHINE_MMIO=y
CONFIG_SC92031=m
CONFIG_NET_POCKET=y
CONFIG_ATP=m
CONFIG_DE600=m
CONFIG_DE620=m
CONFIG_ATL2=m
CONFIG_NETDEV_1000=y
CONFIG_ACENIC=m
# CONFIG_ACENIC_OMIT_TIGON_I is not set
# CONFIG_DL2K is not set
CONFIG_E1000=m
CONFIG_E1000E=m
CONFIG_IP1000=m
CONFIG_IGB=m
CONFIG_IGB_DCA=y
CONFIG_IGBVF=m
CONFIG_NS83820=m
CONFIG_HAMACHI=m
CONFIG_YELLOWFIN=m
CONFIG_R8169=m
CONFIG_R8169_VLAN=y
CONFIG_SIS190=m
CONFIG_SKGE=m
# CONFIG_SKGE_DEBUG is not set
CONFIG_SKY2=m
# CONFIG_SKY2_DEBUG is not set
CONFIG_VIA_VELOCITY=m
CONFIG_TIGON3=m
CONFIG_BNX2=m
CONFIG_CNIC=m
CONFIG_QLA3XXX=m
CONFIG_ATL1=m
CONFIG_ATL1E=m
CONFIG_ATL1C=m
CONFIG_JME=m
CONFIG_NETDEV_10000=y
CONFIG_MDIO=m
CONFIG_CHELSIO_T1=m
CONFIG_CHELSIO_T1_1G=y
CONFIG_CHELSIO_T3_DEPENDS=y
CONFIG_CHELSIO_T3=m
CONFIG_CHELSIO_T4_DEPENDS=y
# CONFIG_CHELSIO_T4 is not set
CONFIG_ENIC=m
CONFIG_IXGBE=m
CONFIG_IXGBE_DCA=y
CONFIG_IXGBE_DCB=y
CONFIG_IXGB=m
CONFIG_S2IO=m
CONFIG_VXGE=m
# CONFIG_VXGE_DEBUG_TRACE_ALL is not set
CONFIG_MYRI10GE=m
CONFIG_MYRI10GE_DCA=y
CONFIG_NETXEN_NIC=m
CONFIG_NIU=m
CONFIG_MLX4_EN=m
CONFIG_MLX4_CORE=m
CONFIG_MLX4_DEBUG=y
CONFIG_TEHUTI=m
CONFIG_BNX2X=m
# CONFIG_QLCNIC is not set
CONFIG_QLGE=m
CONFIG_SFC=m
CONFIG_SFC_MTD=y
CONFIG_BE2NET=m
CONFIG_TR=y
CONFIG_IBMTR=m
CONFIG_IBMOL=m
CONFIG_IBMLS=m
CONFIG_3C359=m
CONFIG_TMS380TR=m
CONFIG_TMSPCI=m
CONFIG_SKISA=m
CONFIG_PROTEON=m
CONFIG_ABYSS=m
CONFIG_MADGEMC=m
CONFIG_SMCTR=m
CONFIG_WLAN=y
CONFIG_PCMCIA_RAYCS=m
CONFIG_LIBERTAS_THINFIRM=m
# CONFIG_LIBERTAS_THINFIRM_DEBUG is not set
CONFIG_LIBERTAS_THINFIRM_USB=m
CONFIG_AIRO=m
CONFIG_ATMEL=m
CONFIG_PCI_ATMEL=m
CONFIG_PCMCIA_ATMEL=m
CONFIG_AT76C50X_USB=m
CONFIG_AIRO_CS=m
CONFIG_PCMCIA_WL3501=m
CONFIG_PRISM54=m
CONFIG_USB_ZD1201=m
CONFIG_USB_NET_RNDIS_WLAN=m
CONFIG_RTL8180=m
CONFIG_RTL8187=m
CONFIG_RTL8187_LEDS=y
CONFIG_ADM8211=m
CONFIG_MAC80211_HWSIM=m
CONFIG_MWL8K=m
CONFIG_ATH_COMMON=m
# CONFIG_ATH_DEBUG is not set
CONFIG_ATH5K=m
# CONFIG_ATH5K_DEBUG is not set
CONFIG_ATH9K_HW=m
CONFIG_ATH9K_COMMON=m
CONFIG_ATH9K=m
# CONFIG_ATH9K_DEBUGFS is not set
# CONFIG_ATH9K_HTC is not set
CONFIG_AR9170_USB=m
CONFIG_AR9170_LEDS=y
CONFIG_B43=m
CONFIG_B43_PCI_AUTOSELECT=y
CONFIG_B43_PCICORE_AUTOSELECT=y
# CONFIG_B43_PCMCIA is not set
# CONFIG_B43_SDIO is not set
CONFIG_B43_PIO=y
CONFIG_B43_PHY_LP=y
CONFIG_B43_LEDS=y
CONFIG_B43_HWRNG=y
# CONFIG_B43_DEBUG is not set
CONFIG_B43LEGACY=m
CONFIG_B43LEGACY_PCI_AUTOSELECT=y
CONFIG_B43LEGACY_PCICORE_AUTOSELECT=y
CONFIG_B43LEGACY_LEDS=y
CONFIG_B43LEGACY_HWRNG=y
CONFIG_B43LEGACY_DEBUG=y
CONFIG_B43LEGACY_DMA=y
CONFIG_B43LEGACY_PIO=y
CONFIG_B43LEGACY_DMA_AND_PIO_MODE=y
# CONFIG_B43LEGACY_DMA_MODE is not set
# CONFIG_B43LEGACY_PIO_MODE is not set
CONFIG_HOSTAP=m
CONFIG_HOSTAP_FIRMWARE=y
CONFIG_HOSTAP_FIRMWARE_NVRAM=y
CONFIG_HOSTAP_PLX=m
CONFIG_HOSTAP_PCI=m
CONFIG_HOSTAP_CS=m
CONFIG_IPW2100=m
CONFIG_IPW2100_MONITOR=y
# CONFIG_IPW2100_DEBUG is not set
CONFIG_IPW2200=m
CONFIG_IPW2200_MONITOR=y
CONFIG_IPW2200_RADIOTAP=y
CONFIG_IPW2200_PROMISCUOUS=y
CONFIG_IPW2200_QOS=y
# CONFIG_IPW2200_DEBUG is not set
CONFIG_LIBIPW=m
CONFIG_LIBIPW_DEBUG=y
CONFIG_IWLWIFI=m
# CONFIG_IWLWIFI_DEBUG is not set
# CONFIG_IWLWIFI_DEVICE_TRACING is not set
CONFIG_IWLAGN=m
CONFIG_IWL4965=y
CONFIG_IWL5000=y
CONFIG_IWL3945=m
CONFIG_IWM=m
# CONFIG_IWM_DEBUG is not set
# CONFIG_IWM_TRACING is not set
CONFIG_LIBERTAS=m
CONFIG_LIBERTAS_USB=m
CONFIG_LIBERTAS_CS=m
CONFIG_LIBERTAS_SDIO=m
CONFIG_LIBERTAS_SPI=m
# CONFIG_LIBERTAS_DEBUG is not set
# CONFIG_LIBERTAS_MESH is not set
CONFIG_HERMES=m
# CONFIG_HERMES_PRISM is not set
CONFIG_HERMES_CACHE_FW_ON_INIT=y
CONFIG_PLX_HERMES=m
CONFIG_TMD_HERMES=m
CONFIG_NORTEL_HERMES=m
CONFIG_PCMCIA_HERMES=m
CONFIG_PCMCIA_SPECTRUM=m
# CONFIG_ORINOCO_USB is not set
CONFIG_P54_COMMON=m
CONFIG_P54_USB=m
CONFIG_P54_PCI=m
CONFIG_P54_SPI=m
CONFIG_P54_LEDS=y
CONFIG_RT2X00=m
CONFIG_RT2400PCI=m
CONFIG_RT2500PCI=m
CONFIG_RT61PCI=m
CONFIG_RT2800PCI_PCI=y
# CONFIG_RT2800PCI is not set
CONFIG_RT2500USB=m
CONFIG_RT73USB=m
CONFIG_RT2800USB=m
CONFIG_RT2800USB_RT30XX=y
# CONFIG_RT2800USB_RT35XX is not set
# CONFIG_RT2800USB_UNKNOWN is not set
CONFIG_RT2800_LIB=m
CONFIG_RT2X00_LIB_PCI=m
CONFIG_RT2X00_LIB_USB=m
CONFIG_RT2X00_LIB=m
CONFIG_RT2X00_LIB_HT=y
CONFIG_RT2X00_LIB_FIRMWARE=y
CONFIG_RT2X00_LIB_CRYPTO=y
CONFIG_RT2X00_LIB_LEDS=y
# CONFIG_RT2X00_LIB_DEBUGFS is not set
# CONFIG_RT2X00_DEBUG is not set
CONFIG_WL12XX=m
CONFIG_WL1251=m
CONFIG_WL1251_SPI=m
CONFIG_WL1251_SDIO=m
CONFIG_WL1271=m
# CONFIG_WL1271_SPI is not set
CONFIG_ZD1211RW=m
# CONFIG_ZD1211RW_DEBUG is not set

#
# WiMAX Wireless Broadband devices
#
CONFIG_WIMAX_I2400M=m
CONFIG_WIMAX_I2400M_USB=m
CONFIG_WIMAX_I2400M_SDIO=m
# CONFIG_WIMAX_IWMC3200_SDIO is not set
CONFIG_WIMAX_I2400M_DEBUG_LEVEL=8

#
# USB Network Adapters
#
CONFIG_USB_CATC=m
CONFIG_USB_KAWETH=m
CONFIG_USB_PEGASUS=m
CONFIG_USB_RTL8150=m
CONFIG_USB_USBNET=m
CONFIG_USB_NET_AX8817X=m
CONFIG_USB_NET_CDCETHER=m
CONFIG_USB_NET_CDC_EEM=m
CONFIG_USB_NET_DM9601=m
# CONFIG_USB_NET_SMSC75XX is not set
CONFIG_USB_NET_SMSC95XX=m
CONFIG_USB_NET_GL620A=m
CONFIG_USB_NET_NET1080=m
CONFIG_USB_NET_PLUSB=m
CONFIG_USB_NET_MCS7830=m
CONFIG_USB_NET_RNDIS_HOST=m
CONFIG_USB_NET_CDC_SUBSET=m
CONFIG_USB_ALI_M5632=y
CONFIG_USB_AN2720=y
CONFIG_USB_BELKIN=y
CONFIG_USB_ARMLINUX=y
CONFIG_USB_EPSON2888=y
CONFIG_USB_KC2190=y
CONFIG_USB_NET_ZAURUS=m
CONFIG_USB_HSO=m
CONFIG_USB_NET_INT51X1=m
CONFIG_USB_CDC_PHONET=m
# CONFIG_USB_IPHETH is not set
# CONFIG_USB_SIERRA_NET is not set
CONFIG_NET_PCMCIA=y
CONFIG_PCMCIA_3C589=m
CONFIG_PCMCIA_3C574=m
CONFIG_PCMCIA_FMVJ18X=m
CONFIG_PCMCIA_PCNET=m
CONFIG_PCMCIA_NMCLAN=m
CONFIG_PCMCIA_SMC91C92=m
CONFIG_PCMCIA_XIRC2PS=m
CONFIG_PCMCIA_AXNET=m
CONFIG_ARCNET_COM20020_CS=m
CONFIG_PCMCIA_IBMTR=m
CONFIG_WAN=y
CONFIG_HOSTESS_SV11=m
CONFIG_COSA=m
CONFIG_LANMEDIA=m
CONFIG_SEALEVEL_4021=m
CONFIG_HDLC=m
CONFIG_HDLC_RAW=m
CONFIG_HDLC_RAW_ETH=m
CONFIG_HDLC_CISCO=m
CONFIG_HDLC_FR=m
CONFIG_HDLC_PPP=m
CONFIG_HDLC_X25=m
CONFIG_PCI200SYN=m
CONFIG_WANXL=m
# CONFIG_PC300TOO is not set
CONFIG_N2=m
CONFIG_C101=m
CONFIG_FARSYNC=m
CONFIG_DSCC4=m
CONFIG_DSCC4_PCISYNC=y
CONFIG_DSCC4_PCI_RST=y
CONFIG_DLCI=m
CONFIG_DLCI_MAX=8
CONFIG_SDLA=m
CONFIG_WAN_ROUTER_DRIVERS=m
CONFIG_CYCLADES_SYNC=m
CONFIG_CYCLOMX_X25=y
CONFIG_LAPBETHER=m
CONFIG_X25_ASY=m
CONFIG_SBNI=m
# CONFIG_SBNI_MULTILINE is not set
CONFIG_ATM_DRIVERS=y
# CONFIG_ATM_DUMMY is not set
CONFIG_ATM_TCP=m
CONFIG_ATM_LANAI=m
CONFIG_ATM_ENI=m
# CONFIG_ATM_ENI_DEBUG is not set
# CONFIG_ATM_ENI_TUNE_BURST is not set
CONFIG_ATM_FIRESTREAM=m
CONFIG_ATM_ZATM=m
# CONFIG_ATM_ZATM_DEBUG is not set
CONFIG_ATM_NICSTAR=m
# CONFIG_ATM_NICSTAR_USE_SUNI is not set
# CONFIG_ATM_NICSTAR_USE_IDT77105 is not set
CONFIG_ATM_IDT77252=m
# CONFIG_ATM_IDT77252_DEBUG is not set
# CONFIG_ATM_IDT77252_RCV_ALL is not set
CONFIG_ATM_IDT77252_USE_SUNI=y
CONFIG_ATM_AMBASSADOR=m
# CONFIG_ATM_AMBASSADOR_DEBUG is not set
CONFIG_ATM_HORIZON=m
# CONFIG_ATM_HORIZON_DEBUG is not set
CONFIG_ATM_IA=m
# CONFIG_ATM_IA_DEBUG is not set
CONFIG_ATM_FORE200E=m
# CONFIG_ATM_FORE200E_USE_TASKLET is not set
CONFIG_ATM_FORE200E_TX_RETRY=16
CONFIG_ATM_FORE200E_DEBUG=0
CONFIG_ATM_HE=m
CONFIG_ATM_HE_USE_SUNI=y
CONFIG_ATM_SOLOS=m
CONFIG_IEEE802154_DRIVERS=m
# CONFIG_IEEE802154_FAKEHARD is not set
CONFIG_FDDI=y
CONFIG_DEFXX=m
# CONFIG_DEFXX_MMIO is not set
CONFIG_SKFP=m
CONFIG_HIPPI=y
CONFIG_ROADRUNNER=m
# CONFIG_ROADRUNNER_LARGE_RINGS is not set
CONFIG_PLIP=m
CONFIG_PPP=y
CONFIG_PPP_MULTILINK=y
CONFIG_PPP_FILTER=y
CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_BSDCOMP=m
CONFIG_PPP_MPPE=m
CONFIG_PPPOE=m
CONFIG_PPPOATM=m
CONFIG_SLIP=m
CONFIG_SLIP_COMPRESSED=y
CONFIG_SLHC=y
CONFIG_SLIP_SMART=y
CONFIG_SLIP_MODE_SLIP6=y
CONFIG_NET_FC=y
CONFIG_NETCONSOLE=m
CONFIG_NETCONSOLE_DYNAMIC=y
CONFIG_NETPOLL=y
# CONFIG_NETPOLL_TRAP is not set
CONFIG_NET_POLL_CONTROLLER=y
CONFIG_VIRTIO_NET=m
CONFIG_VMXNET3=m
CONFIG_ISDN=y
CONFIG_ISDN_I4L=m
CONFIG_ISDN_PPP=y
CONFIG_ISDN_PPP_VJ=y
CONFIG_ISDN_MPP=y
CONFIG_IPPP_FILTER=y
CONFIG_ISDN_PPP_BSDCOMP=m
CONFIG_ISDN_AUDIO=y
CONFIG_ISDN_TTY_FAX=y
CONFIG_ISDN_X25=y

#
# ISDN feature submodules
#
# CONFIG_ISDN_DRV_LOOP is not set
CONFIG_ISDN_DIVERSION=m

#
# ISDN4Linux hardware drivers
#

#
# Passive cards
#
CONFIG_ISDN_DRV_HISAX=m

#
# D-channel protocol features
#
CONFIG_HISAX_EURO=y
CONFIG_DE_AOC=y
# CONFIG_HISAX_NO_SENDCOMPLETE is not set
# CONFIG_HISAX_NO_LLC is not set
# CONFIG_HISAX_NO_KEYPAD is not set
CONFIG_HISAX_1TR6=y
CONFIG_HISAX_NI1=y
CONFIG_HISAX_MAX_CARDS=8

#
# HiSax supported cards
#
CONFIG_HISAX_16_0=y
CONFIG_HISAX_16_3=y
CONFIG_HISAX_TELESPCI=y
CONFIG_HISAX_S0BOX=y
CONFIG_HISAX_AVM_A1=y
CONFIG_HISAX_FRITZPCI=y
CONFIG_HISAX_AVM_A1_PCMCIA=y
CONFIG_HISAX_ELSA=y
CONFIG_HISAX_IX1MICROR2=y
CONFIG_HISAX_DIEHLDIVA=y
CONFIG_HISAX_ASUSCOM=y
CONFIG_HISAX_TELEINT=y
CONFIG_HISAX_HFCS=y
CONFIG_HISAX_SEDLBAUER=y
CONFIG_HISAX_SPORTSTER=y
CONFIG_HISAX_MIC=y
CONFIG_HISAX_NETJET=y
CONFIG_HISAX_NETJET_U=y
CONFIG_HISAX_NICCY=y
CONFIG_HISAX_ISURF=y
CONFIG_HISAX_HSTSAPHIR=y
CONFIG_HISAX_BKM_A4T=y
CONFIG_HISAX_SCT_QUADRO=y
CONFIG_HISAX_GAZEL=y
CONFIG_HISAX_HFC_PCI=y
CONFIG_HISAX_W6692=y
CONFIG_HISAX_HFC_SX=y
CONFIG_HISAX_ENTERNOW_PCI=y
# CONFIG_HISAX_DEBUG is not set

#
# HiSax PCMCIA card service modules
#
CONFIG_HISAX_SEDLBAUER_CS=m
CONFIG_HISAX_ELSA_CS=m
CONFIG_HISAX_AVM_A1_CS=m
CONFIG_HISAX_TELES_CS=m

#
# HiSax sub driver modules
#
CONFIG_HISAX_ST5481=m
CONFIG_HISAX_HFCUSB=m
CONFIG_HISAX_HFC4S8S=m
CONFIG_HISAX_FRITZ_PCIPNP=m

#
# Active cards
#
CONFIG_ISDN_DRV_ICN=m
CONFIG_ISDN_DRV_PCBIT=m
CONFIG_ISDN_DRV_SC=m
CONFIG_ISDN_DRV_ACT2000=m
CONFIG_ISDN_CAPI=m
CONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON=y
CONFIG_CAPI_TRACE=y
CONFIG_ISDN_CAPI_MIDDLEWARE=y
CONFIG_ISDN_CAPI_CAPI20=m
CONFIG_ISDN_CAPI_CAPIFS_BOOL=y
CONFIG_ISDN_CAPI_CAPIFS=m
CONFIG_ISDN_CAPI_CAPIDRV=m

#
# CAPI hardware drivers
#
CONFIG_CAPI_AVM=y
CONFIG_ISDN_DRV_AVMB1_B1ISA=m
CONFIG_ISDN_DRV_AVMB1_B1PCI=m
CONFIG_ISDN_DRV_AVMB1_B1PCIV4=y
CONFIG_ISDN_DRV_AVMB1_T1ISA=m
CONFIG_ISDN_DRV_AVMB1_B1PCMCIA=m
CONFIG_ISDN_DRV_AVMB1_AVM_CS=m
CONFIG_ISDN_DRV_AVMB1_T1PCI=m
CONFIG_ISDN_DRV_AVMB1_C4=m
CONFIG_CAPI_EICON=y
CONFIG_ISDN_DIVAS=m
CONFIG_ISDN_DIVAS_BRIPCI=y
CONFIG_ISDN_DIVAS_PRIPCI=y
CONFIG_ISDN_DIVAS_DIVACAPI=m
CONFIG_ISDN_DIVAS_USERIDI=m
CONFIG_ISDN_DIVAS_MAINT=m
CONFIG_ISDN_DRV_GIGASET=m
# CONFIG_GIGASET_CAPI is not set
CONFIG_GIGASET_I4L=y
# CONFIG_GIGASET_DUMMYLL is not set
CONFIG_GIGASET_BASE=m
CONFIG_GIGASET_M105=m
CONFIG_GIGASET_M101=m
# CONFIG_GIGASET_DEBUG is not set
CONFIG_HYSDN=m
CONFIG_HYSDN_CAPI=y
CONFIG_MISDN=m
CONFIG_MISDN_DSP=m
CONFIG_MISDN_L1OIP=m

#
# mISDN hardware drivers
#
CONFIG_MISDN_HFCPCI=m
CONFIG_MISDN_HFCMULTI=m
CONFIG_MISDN_HFCUSB=m
CONFIG_MISDN_AVMFRITZ=m
CONFIG_MISDN_SPEEDFAX=m
CONFIG_MISDN_INFINEON=m
CONFIG_MISDN_W6692=m
CONFIG_MISDN_NETJET=m
CONFIG_MISDN_IPAC=m
CONFIG_MISDN_ISAR=m
CONFIG_ISDN_HDLC=m
CONFIG_PHONE=m
CONFIG_PHONE_IXJ=m
CONFIG_PHONE_IXJ_PCMCIA=m

#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=m
CONFIG_INPUT_POLLDEV=m
CONFIG_INPUT_SPARSEKMAP=m

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_JOYDEV=m
CONFIG_INPUT_EVDEV=y
CONFIG_INPUT_EVBUG=m

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ADP5588=m
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_QT2160 is not set
CONFIG_KEYBOARD_LKKBD=m
CONFIG_KEYBOARD_GPIO=m
# CONFIG_KEYBOARD_TCA6416 is not set
CONFIG_KEYBOARD_MATRIX=m
CONFIG_KEYBOARD_LM8323=m
CONFIG_KEYBOARD_MAX7359=m
CONFIG_KEYBOARD_NEWTON=m
CONFIG_KEYBOARD_OPENCORES=m
CONFIG_KEYBOARD_STOWAWAY=m
CONFIG_KEYBOARD_SUNKBD=m
CONFIG_KEYBOARD_TWL4030=m
CONFIG_KEYBOARD_XTKBD=m
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=m
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
CONFIG_MOUSE_PS2_ELANTECH=y
CONFIG_MOUSE_PS2_SENTELIC=y
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
CONFIG_MOUSE_PS2_OLPC=y
CONFIG_MOUSE_SERIAL=m
CONFIG_MOUSE_APPLETOUCH=m
CONFIG_MOUSE_BCM5974=m
CONFIG_MOUSE_INPORT=m
# CONFIG_MOUSE_ATIXL is not set
CONFIG_MOUSE_LOGIBM=m
CONFIG_MOUSE_PC110PAD=m
CONFIG_MOUSE_VSXXXAA=m
CONFIG_MOUSE_GPIO=m
CONFIG_MOUSE_SYNAPTICS_I2C=m
CONFIG_INPUT_JOYSTICK=y
CONFIG_JOYSTICK_ANALOG=m
CONFIG_JOYSTICK_A3D=m
CONFIG_JOYSTICK_ADI=m
CONFIG_JOYSTICK_COBRA=m
CONFIG_JOYSTICK_GF2K=m
CONFIG_JOYSTICK_GRIP=m
CONFIG_JOYSTICK_GRIP_MP=m
CONFIG_JOYSTICK_GUILLEMOT=m
CONFIG_JOYSTICK_INTERACT=m
CONFIG_JOYSTICK_SIDEWINDER=m
CONFIG_JOYSTICK_TMDC=m
CONFIG_JOYSTICK_IFORCE=m
CONFIG_JOYSTICK_IFORCE_USB=y
CONFIG_JOYSTICK_IFORCE_232=y
CONFIG_JOYSTICK_WARRIOR=m
CONFIG_JOYSTICK_MAGELLAN=m
CONFIG_JOYSTICK_SPACEORB=m
CONFIG_JOYSTICK_SPACEBALL=m
CONFIG_JOYSTICK_STINGER=m
CONFIG_JOYSTICK_TWIDJOY=m
CONFIG_JOYSTICK_ZHENHUA=m
CONFIG_JOYSTICK_DB9=m
CONFIG_JOYSTICK_GAMECON=m
CONFIG_JOYSTICK_TURBOGRAFX=m
CONFIG_JOYSTICK_JOYDUMP=m
CONFIG_JOYSTICK_XPAD=m
CONFIG_JOYSTICK_XPAD_FF=y
CONFIG_JOYSTICK_XPAD_LEDS=y
CONFIG_JOYSTICK_WALKERA0701=m
CONFIG_INPUT_TABLET=y
CONFIG_TABLET_USB_ACECAD=m
CONFIG_TABLET_USB_AIPTEK=m
CONFIG_TABLET_USB_GTCO=m
CONFIG_TABLET_USB_KBTAB=m
CONFIG_TABLET_USB_WACOM=m
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_ADS7846=m
CONFIG_TOUCHSCREEN_AD7877=m
CONFIG_TOUCHSCREEN_AD7879_I2C=m
CONFIG_TOUCHSCREEN_AD7879=m
CONFIG_TOUCHSCREEN_DA9034=m
# CONFIG_TOUCHSCREEN_DYNAPRO is not set
# CONFIG_TOUCHSCREEN_HAMPSHIRE is not set
CONFIG_TOUCHSCREEN_EETI=m
CONFIG_TOUCHSCREEN_FUJITSU=m
CONFIG_TOUCHSCREEN_GUNZE=m
CONFIG_TOUCHSCREEN_ELO=m
CONFIG_TOUCHSCREEN_WACOM_W8001=m
CONFIG_TOUCHSCREEN_MCS5000=m
CONFIG_TOUCHSCREEN_MTOUCH=m
CONFIG_TOUCHSCREEN_INEXIO=m
CONFIG_TOUCHSCREEN_MK712=m
CONFIG_TOUCHSCREEN_HTCPEN=m
CONFIG_TOUCHSCREEN_PENMOUNT=m
CONFIG_TOUCHSCREEN_TOUCHRIGHT=m
CONFIG_TOUCHSCREEN_TOUCHWIN=m
CONFIG_TOUCHSCREEN_UCB1400=m
CONFIG_TOUCHSCREEN_WM97XX=m
CONFIG_TOUCHSCREEN_WM9705=y
CONFIG_TOUCHSCREEN_WM9712=y
CONFIG_TOUCHSCREEN_WM9713=y
CONFIG_TOUCHSCREEN_USB_COMPOSITE=m
# CONFIG_TOUCHSCREEN_MC13783 is not set
CONFIG_TOUCHSCREEN_USB_EGALAX=y
CONFIG_TOUCHSCREEN_USB_PANJIT=y
CONFIG_TOUCHSCREEN_USB_3M=y
CONFIG_TOUCHSCREEN_USB_ITM=y
CONFIG_TOUCHSCREEN_USB_ETURBO=y
CONFIG_TOUCHSCREEN_USB_GUNZE=y
CONFIG_TOUCHSCREEN_USB_DMC_TSC10=y
CONFIG_TOUCHSCREEN_USB_IRTOUCH=y
CONFIG_TOUCHSCREEN_USB_IDEALTEK=y
CONFIG_TOUCHSCREEN_USB_GENERAL_TOUCH=y
CONFIG_TOUCHSCREEN_USB_GOTOP=y
CONFIG_TOUCHSCREEN_USB_JASTEC=y
CONFIG_TOUCHSCREEN_USB_E2I=y
CONFIG_TOUCHSCREEN_USB_ZYTRONIC=y
CONFIG_TOUCHSCREEN_USB_ETT_TC5UH=y
CONFIG_TOUCHSCREEN_USB_NEXIO=y
CONFIG_TOUCHSCREEN_TOUCHIT213=m
CONFIG_TOUCHSCREEN_TSC2007=m
# CONFIG_TOUCHSCREEN_TPS6507X is not set
CONFIG_INPUT_MISC=y
# CONFIG_INPUT_AD714X is not set
# CONFIG_INPUT_PCSPKR is not set
# CONFIG_INPUT_APANEL is not set
CONFIG_INPUT_WISTRON_BTNS=m
CONFIG_INPUT_ATLAS_BTNS=m
CONFIG_INPUT_ATI_REMOTE=m
CONFIG_INPUT_ATI_REMOTE2=m
CONFIG_INPUT_KEYSPAN_REMOTE=m
CONFIG_INPUT_POWERMATE=m
CONFIG_INPUT_YEALINK=m
CONFIG_INPUT_CM109=m
CONFIG_INPUT_TWL4030_PWRBUTTON=m
# CONFIG_INPUT_TWL4030_VIBRA is not set
CONFIG_INPUT_UINPUT=m
CONFIG_INPUT_WINBOND_CIR=m
CONFIG_INPUT_PCF50633_PMU=m
# CONFIG_INPUT_PCF8574 is not set
CONFIG_INPUT_GPIO_ROTARY_ENCODER=m

#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=m
CONFIG_SERIO_CT82C710=m
CONFIG_SERIO_PARKBD=m
CONFIG_SERIO_PCIPS2=m
CONFIG_SERIO_LIBPS2=y
CONFIG_SERIO_RAW=m
# CONFIG_SERIO_ALTERA_PS2 is not set
CONFIG_GAMEPORT=m
CONFIG_GAMEPORT_NS558=m
CONFIG_GAMEPORT_L4=m
CONFIG_GAMEPORT_EMU10K1=m
CONFIG_GAMEPORT_FM801=m

#
# Character devices
#
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
# CONFIG_DEVKMEM is not set
CONFIG_SERIAL_NONSTANDARD=y
CONFIG_COMPUTONE=m
CONFIG_ROCKETPORT=m
CONFIG_CYCLADES=m
# CONFIG_CYZ_INTR is not set
CONFIG_DIGIEPCA=m
CONFIG_MOXA_INTELLIO=m
CONFIG_MOXA_SMARTIO=m
# CONFIG_ISI is not set
CONFIG_SYNCLINK=m
CONFIG_SYNCLINKMP=m
CONFIG_SYNCLINK_GT=m
CONFIG_N_HDLC=m
# CONFIG_N_GSM is not set
CONFIG_RISCOM8=m
CONFIG_SPECIALIX=m
CONFIG_STALDRV=y
CONFIG_STALLION=m
CONFIG_ISTALLION=m
CONFIG_NOZOMI=m

#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_PNP=y
CONFIG_SERIAL_8250_CS=m
CONFIG_SERIAL_8250_NR_UARTS=48
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_FOURPORT=m
CONFIG_SERIAL_8250_ACCENT=m
CONFIG_SERIAL_8250_BOCA=m
CONFIG_SERIAL_8250_EXAR_ST16C554=m
CONFIG_SERIAL_8250_HUB6=m
CONFIG_SERIAL_8250_SHARE_IRQ=y
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
CONFIG_SERIAL_8250_RSA=y
CONFIG_SERIAL_8250_MCA=m

#
# Non-8250 serial port support
#
CONFIG_SERIAL_MAX3100=m
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_SERIAL_JSM=m
# CONFIG_SERIAL_TIMBERDALE is not set
# CONFIG_SERIAL_ALTERA_JTAGUART is not set
# CONFIG_SERIAL_ALTERA_UART is not set
CONFIG_UNIX98_PTYS=y
CONFIG_DEVPTS_MULTIPLE_INSTANCES=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=0
CONFIG_PRINTER=m
# CONFIG_LP_CONSOLE is not set
CONFIG_PPDEV=m
CONFIG_HVC_DRIVER=y
CONFIG_VIRTIO_CONSOLE=m
CONFIG_IPMI_HANDLER=m
# CONFIG_IPMI_PANIC_EVENT is not set
CONFIG_IPMI_DEVICE_INTERFACE=m
CONFIG_IPMI_SI=m
CONFIG_IPMI_WATCHDOG=m
CONFIG_IPMI_POWEROFF=m
CONFIG_HW_RANDOM=y
CONFIG_HW_RANDOM_TIMERIOMEM=m
CONFIG_HW_RANDOM_INTEL=m
CONFIG_HW_RANDOM_AMD=m
CONFIG_HW_RANDOM_GEODE=m
CONFIG_HW_RANDOM_VIA=m
CONFIG_HW_RANDOM_VIRTIO=m
CONFIG_NVRAM=m
CONFIG_DTLK=m
CONFIG_R3964=m
CONFIG_APPLICOM=m
CONFIG_SONYPI=m

#
# PCMCIA character devices
#
CONFIG_SYNCLINK_CS=m
CONFIG_CARDMAN_4000=m
CONFIG_CARDMAN_4040=m
CONFIG_IPWIRELESS=m
CONFIG_MWAVE=m
CONFIG_SCx200_GPIO=m
CONFIG_PC8736x_GPIO=m
CONFIG_NSC_GPIO=m
CONFIG_CS5535_GPIO=m
CONFIG_RAW_DRIVER=m
CONFIG_MAX_RAW_DEVS=256
CONFIG_HPET=y
CONFIG_HPET_MMAP=y
CONFIG_HANGCHECK_TIMER=m
CONFIG_TCG_TPM=m
CONFIG_TCG_TIS=m
CONFIG_TCG_NSC=m
CONFIG_TCG_ATMEL=m
CONFIG_TCG_INFINEON=m
CONFIG_TELCLOCK=m
CONFIG_DEVPORT=y
# CONFIG_RAMOOPS is not set
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=m
# CONFIG_I2C_HELPER_AUTO is not set
CONFIG_I2C_SMBUS=m

#
# I2C Algorithms
#
CONFIG_I2C_ALGOBIT=m
CONFIG_I2C_ALGOPCF=m
CONFIG_I2C_ALGOPCA=m

#
# I2C Hardware Bus support
#

#
# PC SMBus host controller drivers
#
CONFIG_I2C_ALI1535=m
CONFIG_I2C_ALI1563=m
CONFIG_I2C_ALI15X3=m
CONFIG_I2C_AMD756=m
CONFIG_I2C_AMD756_S4882=m
CONFIG_I2C_AMD8111=m
CONFIG_I2C_I801=m
CONFIG_I2C_ISCH=m
CONFIG_I2C_PIIX4=m
CONFIG_I2C_NFORCE2=m
CONFIG_I2C_NFORCE2_S4985=m
CONFIG_I2C_SIS5595=m
CONFIG_I2C_SIS630=m
CONFIG_I2C_SIS96X=m
CONFIG_I2C_VIA=m
CONFIG_I2C_VIAPRO=m

#
# ACPI drivers
#
CONFIG_I2C_SCMI=m

#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
CONFIG_I2C_GPIO=m
CONFIG_I2C_OCORES=m
CONFIG_I2C_PCA_PLATFORM=m
CONFIG_I2C_SIMTEC=m
# CONFIG_I2C_XILINX is not set

#
# External I2C/SMBus adapter drivers
#
CONFIG_I2C_PARPORT=m
CONFIG_I2C_PARPORT_LIGHT=m
CONFIG_I2C_TAOS_EVM=m
CONFIG_I2C_TINY_USB=m

#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_ELEKTOR is not set
CONFIG_I2C_PCA_ISA=m
CONFIG_I2C_STUB=m
CONFIG_SCx200_I2C=m
CONFIG_SCx200_I2C_SCL=12
CONFIG_SCx200_I2C_SDA=13
CONFIG_SCx200_ACB=m
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
CONFIG_SPI=y
CONFIG_SPI_MASTER=y

#
# SPI Master Controller Drivers
#
CONFIG_SPI_BITBANG=m
CONFIG_SPI_BUTTERFLY=m
CONFIG_SPI_GPIO=m
CONFIG_SPI_LM70_LLP=m
# CONFIG_SPI_XILINX is not set
# CONFIG_SPI_DESIGNWARE is not set

#
# SPI Protocol Masters
#
CONFIG_SPI_SPIDEV=m
CONFIG_SPI_TLE62X0=m

#
# PPS support
#
CONFIG_PPS=m
# CONFIG_PPS_DEBUG is not set

#
# PPS clients support
#
# CONFIG_PPS_CLIENT_KTIMER is not set
# CONFIG_PPS_CLIENT_LDISC is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
CONFIG_GPIOLIB=y
CONFIG_GPIO_SYSFS=y
CONFIG_GPIO_MAX730X=m

#
# Memory mapped GPIO expanders:
#
# CONFIG_GPIO_IT8761E is not set
# CONFIG_GPIO_SCH is not set

#
# I2C GPIO expanders:
#
# CONFIG_GPIO_MAX7300 is not set
CONFIG_GPIO_MAX732X=m
CONFIG_GPIO_PCA953X=m
CONFIG_GPIO_PCF857X=m
CONFIG_GPIO_TWL4030=m
# CONFIG_GPIO_ADP5588 is not set

#
# PCI GPIO expanders:
#
# CONFIG_GPIO_CS5535 is not set
CONFIG_GPIO_LANGWELL=y
# CONFIG_GPIO_RDC321X is not set

#
# SPI GPIO expanders:
#
CONFIG_GPIO_MAX7301=m
CONFIG_GPIO_MCP23S08=m
CONFIG_GPIO_MC33880=m

#
# AC97 GPIO expanders:
#
CONFIG_GPIO_UCB1400=y

#
# MODULbus GPIO expanders:
#
CONFIG_W1=m
CONFIG_W1_CON=y

#
# 1-wire Bus Masters
#
CONFIG_W1_MASTER_MATROX=m
CONFIG_W1_MASTER_DS2490=m
CONFIG_W1_MASTER_DS2482=m
CONFIG_W1_MASTER_GPIO=m

#
# 1-wire Slaves
#
CONFIG_W1_SLAVE_THERM=m
CONFIG_W1_SLAVE_SMEM=m
CONFIG_W1_SLAVE_DS2431=m
CONFIG_W1_SLAVE_DS2433=m
# CONFIG_W1_SLAVE_DS2433_CRC is not set
CONFIG_W1_SLAVE_DS2760=m
CONFIG_W1_SLAVE_BQ27000=m
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
CONFIG_PDA_POWER=m
# CONFIG_TEST_POWER is not set
CONFIG_BATTERY_DS2760=m
CONFIG_BATTERY_DS2782=m
CONFIG_BATTERY_OLPC=m
CONFIG_BATTERY_BQ27x00=m
CONFIG_BATTERY_DA9030=m
CONFIG_BATTERY_MAX17040=m
CONFIG_CHARGER_PCF50633=m
CONFIG_HWMON=y
CONFIG_HWMON_VID=m
# CONFIG_HWMON_DEBUG_CHIP is not set

#
# Native drivers
#
CONFIG_SENSORS_ABITUGURU=m
CONFIG_SENSORS_ABITUGURU3=m
CONFIG_SENSORS_AD7414=m
CONFIG_SENSORS_AD7418=m
CONFIG_SENSORS_ADCXX=m
CONFIG_SENSORS_ADM1021=m
CONFIG_SENSORS_ADM1025=m
CONFIG_SENSORS_ADM1026=m
CONFIG_SENSORS_ADM1029=m
CONFIG_SENSORS_ADM1031=m
CONFIG_SENSORS_ADM9240=m
# CONFIG_SENSORS_ADT7411 is not set
CONFIG_SENSORS_ADT7462=m
CONFIG_SENSORS_ADT7470=m
CONFIG_SENSORS_ADT7475=m
# CONFIG_SENSORS_ASC7621 is not set
CONFIG_SENSORS_K8TEMP=m
# CONFIG_SENSORS_K10TEMP is not set
CONFIG_SENSORS_ASB100=m
CONFIG_SENSORS_ATXP1=m
CONFIG_SENSORS_DS1621=m
CONFIG_SENSORS_I5K_AMB=m
CONFIG_SENSORS_F71805F=m
CONFIG_SENSORS_F71882FG=m
CONFIG_SENSORS_F75375S=m
CONFIG_SENSORS_FSCHMD=m
CONFIG_SENSORS_G760A=m
CONFIG_SENSORS_GL518SM=m
CONFIG_SENSORS_GL520SM=m
CONFIG_SENSORS_CORETEMP=m
CONFIG_SENSORS_IBMAEM=m
CONFIG_SENSORS_IBMPEX=m
CONFIG_SENSORS_IT87=m
CONFIG_SENSORS_LM63=m
CONFIG_SENSORS_LM70=m
# CONFIG_SENSORS_LM73 is not set
CONFIG_SENSORS_LM75=m
CONFIG_SENSORS_LM77=m
CONFIG_SENSORS_LM78=m
CONFIG_SENSORS_LM80=m
CONFIG_SENSORS_LM83=m
CONFIG_SENSORS_LM85=m
CONFIG_SENSORS_LM87=m
CONFIG_SENSORS_LM90=m
CONFIG_SENSORS_LM92=m
CONFIG_SENSORS_LM93=m
CONFIG_SENSORS_LTC4215=m
CONFIG_SENSORS_LTC4245=m
CONFIG_SENSORS_LM95241=m
CONFIG_SENSORS_MAX1111=m
CONFIG_SENSORS_MAX1619=m
CONFIG_SENSORS_MAX6650=m
CONFIG_SENSORS_PC87360=m
CONFIG_SENSORS_PC87427=m
CONFIG_SENSORS_PCF8591=m
CONFIG_SENSORS_SHT15=m
CONFIG_SENSORS_SIS5595=m
CONFIG_SENSORS_DME1737=m
# CONFIG_SENSORS_EMC1403 is not set
CONFIG_SENSORS_SMSC47M1=m
CONFIG_SENSORS_SMSC47M192=m
CONFIG_SENSORS_SMSC47B397=m
CONFIG_SENSORS_ADS7828=m
# CONFIG_SENSORS_ADS7871 is not set
# CONFIG_SENSORS_AMC6821 is not set
CONFIG_SENSORS_THMC50=m
# CONFIG_SENSORS_TMP102 is not set
CONFIG_SENSORS_TMP401=m
CONFIG_SENSORS_TMP421=m
# CONFIG_SENSORS_VIA_CPUTEMP is not set
CONFIG_SENSORS_VIA686A=m
CONFIG_SENSORS_VT1211=m
CONFIG_SENSORS_VT8231=m
CONFIG_SENSORS_W83781D=m
CONFIG_SENSORS_W83791D=m
CONFIG_SENSORS_W83792D=m
CONFIG_SENSORS_W83793=m
CONFIG_SENSORS_W83L785TS=m
CONFIG_SENSORS_W83L786NG=m
CONFIG_SENSORS_W83627HF=m
CONFIG_SENSORS_W83627EHF=m
CONFIG_SENSORS_HDAPS=m
# CONFIG_SENSORS_LIS3_I2C is not set
CONFIG_SENSORS_APPLESMC=m
# CONFIG_SENSORS_MC13783_ADC is not set

#
# ACPI drivers
#
CONFIG_SENSORS_ATK0110=m
CONFIG_SENSORS_LIS3LV02D=m
CONFIG_THERMAL=y
CONFIG_THERMAL_HWMON=y
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set

#
# Watchdog Device Drivers
#
CONFIG_SOFT_WATCHDOG=m
CONFIG_TWL4030_WATCHDOG=m
CONFIG_ACQUIRE_WDT=m
CONFIG_ADVANTECH_WDT=m
CONFIG_ALIM1535_WDT=m
CONFIG_ALIM7101_WDT=m
CONFIG_SC520_WDT=m
CONFIG_SBC_FITPC2_WATCHDOG=m
CONFIG_EUROTECH_WDT=m
CONFIG_IB700_WDT=m
CONFIG_IBMASR=m
CONFIG_WAFER_WDT=m
CONFIG_I6300ESB_WDT=m
CONFIG_ITCO_WDT=m
CONFIG_ITCO_VENDOR_SUPPORT=y
CONFIG_IT8712F_WDT=m
CONFIG_IT87_WDT=m
# CONFIG_HP_WATCHDOG is not set
CONFIG_SC1200_WDT=m
CONFIG_SCx200_WDT=m
CONFIG_PC87413_WDT=m
CONFIG_60XX_WDT=m
CONFIG_SBC8360_WDT=m
CONFIG_SBC7240_WDT=m
CONFIG_CPU5_WDT=m
CONFIG_SMSC_SCH311X_WDT=m
CONFIG_SMSC37B787_WDT=m
CONFIG_W83627HF_WDT=m
CONFIG_W83697HF_WDT=m
CONFIG_W83697UG_WDT=m
CONFIG_W83877F_WDT=m
CONFIG_W83977F_WDT=m
CONFIG_MACHZ_WDT=m
CONFIG_SBC_EPX_C3_WATCHDOG=m

#
# ISA-based Watchdog Cards
#
CONFIG_PCWATCHDOG=m
CONFIG_MIXCOMWD=m
CONFIG_WDT=m

#
# PCI-based Watchdog Cards
#
CONFIG_PCIPCWATCHDOG=m
CONFIG_WDTPCI=m

#
# USB-based Watchdog Cards
#
CONFIG_USBPCWATCHDOG=m
CONFIG_SSB_POSSIBLE=y

#
# Sonics Silicon Backplane
#
CONFIG_SSB=m
CONFIG_SSB_SPROM=y
CONFIG_SSB_BLOCKIO=y
CONFIG_SSB_PCIHOST_POSSIBLE=y
CONFIG_SSB_PCIHOST=y
CONFIG_SSB_B43_PCI_BRIDGE=y
CONFIG_SSB_PCMCIAHOST_POSSIBLE=y
# CONFIG_SSB_PCMCIAHOST is not set
CONFIG_SSB_SDIOHOST_POSSIBLE=y
CONFIG_SSB_SDIOHOST=y
# CONFIG_SSB_DEBUG is not set
CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
CONFIG_SSB_DRIVER_PCICORE=y
CONFIG_MFD_SUPPORT=y
CONFIG_MFD_CORE=y
# CONFIG_MFD_88PM860X is not set
CONFIG_MFD_SM501=m
# CONFIG_MFD_SM501_GPIO is not set
CONFIG_HTC_PASIC3=m
# CONFIG_HTC_I2CPLD is not set
CONFIG_UCB1400_CORE=m
CONFIG_TPS65010=m
# CONFIG_TPS6507X is not set
CONFIG_TWL4030_CORE=y
CONFIG_TWL4030_CODEC=y
# CONFIG_MFD_TC35892 is not set
# CONFIG_MFD_TMIO is not set
CONFIG_PMIC_DA903X=y
# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_MAX8925 is not set
CONFIG_MFD_WM8400=m
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_WM8994 is not set
CONFIG_MFD_PCF50633=m
CONFIG_MFD_MC13783=m
CONFIG_PCF50633_ADC=m
CONFIG_PCF50633_GPIO=m
# CONFIG_ABX500_CORE is not set
# CONFIG_EZX_PCAP is not set
# CONFIG_AB8500_CORE is not set
# CONFIG_MFD_TIMBERDALE is not set
CONFIG_LPC_SCH=m
# CONFIG_MFD_RDC321X is not set
# CONFIG_MFD_JANZ_CMODIO is not set
CONFIG_REGULATOR=y
CONFIG_REGULATOR_DEBUG=y
# CONFIG_REGULATOR_DUMMY is not set
# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
CONFIG_REGULATOR_VIRTUAL_CONSUMER=m
CONFIG_REGULATOR_USERSPACE_CONSUMER=m
CONFIG_REGULATOR_BQ24022=m
CONFIG_REGULATOR_MAX1586=m
# CONFIG_REGULATOR_MAX8649 is not set
# CONFIG_REGULATOR_MAX8660 is not set
CONFIG_REGULATOR_TWL4030=y
CONFIG_REGULATOR_WM8400=m
CONFIG_REGULATOR_DA903X=m
CONFIG_REGULATOR_PCF50633=m
CONFIG_REGULATOR_LP3971=m
CONFIG_REGULATOR_MC13783=m
CONFIG_REGULATOR_TPS65023=m
CONFIG_REGULATOR_TPS6507X=m
CONFIG_MEDIA_SUPPORT=m

#
# Multimedia core support
#
CONFIG_VIDEO_DEV=m
CONFIG_VIDEO_V4L2_COMMON=m
CONFIG_VIDEO_ALLOW_V4L1=y
CONFIG_VIDEO_V4L1_COMPAT=y
CONFIG_DVB_CORE=m
CONFIG_VIDEO_MEDIA=m

#
# Multimedia drivers
#
CONFIG_VIDEO_SAA7146=m
CONFIG_VIDEO_SAA7146_VV=m
CONFIG_IR_CORE=m
CONFIG_VIDEO_IR=m
CONFIG_RC_MAP=m
CONFIG_IR_NEC_DECODER=m
CONFIG_IR_RC5_DECODER=m
CONFIG_IR_RC6_DECODER=m
CONFIG_IR_JVC_DECODER=m
CONFIG_IR_SONY_DECODER=m
# CONFIG_IR_IMON is not set
CONFIG_MEDIA_ATTACH=y
CONFIG_MEDIA_TUNER=m
# CONFIG_MEDIA_TUNER_CUSTOMISE is not set
CONFIG_MEDIA_TUNER_SIMPLE=m
CONFIG_MEDIA_TUNER_TDA8290=m
CONFIG_MEDIA_TUNER_TDA827X=m
CONFIG_MEDIA_TUNER_TDA18271=m
CONFIG_MEDIA_TUNER_TDA9887=m
CONFIG_MEDIA_TUNER_TEA5761=m
CONFIG_MEDIA_TUNER_TEA5767=m
CONFIG_MEDIA_TUNER_MT20XX=m
CONFIG_MEDIA_TUNER_MT2060=m
CONFIG_MEDIA_TUNER_MT2266=m
CONFIG_MEDIA_TUNER_MT2131=m
CONFIG_MEDIA_TUNER_QT1010=m
CONFIG_MEDIA_TUNER_XC2028=m
CONFIG_MEDIA_TUNER_XC5000=m
CONFIG_MEDIA_TUNER_MXL5005S=m
CONFIG_MEDIA_TUNER_MXL5007T=m
CONFIG_MEDIA_TUNER_MC44S803=m
CONFIG_MEDIA_TUNER_MAX2165=m
CONFIG_VIDEO_V4L2=m
CONFIG_VIDEO_V4L1=m
CONFIG_VIDEOBUF_GEN=m
CONFIG_VIDEOBUF_DMA_SG=m
CONFIG_VIDEOBUF_VMALLOC=m
CONFIG_VIDEOBUF_DVB=m
CONFIG_VIDEO_BTCX=m
CONFIG_VIDEO_TVEEPROM=m
CONFIG_VIDEO_TUNER=m
CONFIG_VIDEO_CAPTURE_DRIVERS=y
# CONFIG_VIDEO_ADV_DEBUG is not set
# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
CONFIG_VIDEO_IR_I2C=m
CONFIG_VIDEO_TVAUDIO=m
CONFIG_VIDEO_TDA7432=m
CONFIG_VIDEO_TDA9840=m
CONFIG_VIDEO_TEA6415C=m
CONFIG_VIDEO_TEA6420=m
CONFIG_VIDEO_MSP3400=m
CONFIG_VIDEO_CS5345=m
CONFIG_VIDEO_CS53L32A=m
CONFIG_VIDEO_M52790=m
CONFIG_VIDEO_WM8775=m
CONFIG_VIDEO_WM8739=m
CONFIG_VIDEO_VP27SMPX=m
CONFIG_VIDEO_SAA6588=m
CONFIG_VIDEO_BT819=m
CONFIG_VIDEO_BT856=m
CONFIG_VIDEO_BT866=m
CONFIG_VIDEO_KS0127=m
CONFIG_VIDEO_OV7670=m
CONFIG_VIDEO_MT9V011=m
CONFIG_VIDEO_SAA7110=m
CONFIG_VIDEO_SAA711X=m
CONFIG_VIDEO_SAA717X=m
CONFIG_VIDEO_TVP5150=m
CONFIG_VIDEO_VPX3220=m
CONFIG_VIDEO_CX25840=m
CONFIG_VIDEO_CX2341X=m
CONFIG_VIDEO_SAA7127=m
CONFIG_VIDEO_SAA7185=m
CONFIG_VIDEO_ADV7170=m
CONFIG_VIDEO_ADV7175=m
CONFIG_VIDEO_UPD64031A=m
CONFIG_VIDEO_UPD64083=m
CONFIG_VIDEO_BT848=m
CONFIG_VIDEO_BT848_DVB=y
CONFIG_VIDEO_PMS=m
CONFIG_VIDEO_BWQCAM=m
CONFIG_VIDEO_CQCAM=m
CONFIG_VIDEO_W9966=m
CONFIG_VIDEO_CPIA=m
CONFIG_VIDEO_CPIA_PP=m
CONFIG_VIDEO_CPIA_USB=m
CONFIG_VIDEO_CPIA2=m
CONFIG_VIDEO_SAA5246A=m
CONFIG_VIDEO_SAA5249=m
CONFIG_VIDEO_STRADIS=m
CONFIG_VIDEO_ZORAN=m
CONFIG_VIDEO_ZORAN_DC30=m
CONFIG_VIDEO_ZORAN_ZR36060=m
CONFIG_VIDEO_ZORAN_BUZ=m
CONFIG_VIDEO_ZORAN_DC10=m
CONFIG_VIDEO_ZORAN_LML33=m
CONFIG_VIDEO_ZORAN_LML33R10=m
CONFIG_VIDEO_ZORAN_AVS6EYES=m
CONFIG_VIDEO_MEYE=m
CONFIG_VIDEO_SAA7134=m
CONFIG_VIDEO_SAA7134_ALSA=m
CONFIG_VIDEO_SAA7134_DVB=m
CONFIG_VIDEO_MXB=m
CONFIG_VIDEO_HEXIUM_ORION=m
CONFIG_VIDEO_HEXIUM_GEMINI=m
CONFIG_VIDEO_CX88=m
CONFIG_VIDEO_CX88_ALSA=m
CONFIG_VIDEO_CX88_BLACKBIRD=m
CONFIG_VIDEO_CX88_DVB=m
CONFIG_VIDEO_CX88_MPEG=m
CONFIG_VIDEO_CX88_VP3054=m
CONFIG_VIDEO_CX23885=m
CONFIG_VIDEO_AU0828=m
CONFIG_VIDEO_IVTV=m
CONFIG_VIDEO_FB_IVTV=m
CONFIG_VIDEO_CX18=m
# CONFIG_VIDEO_CX18_ALSA is not set
CONFIG_VIDEO_SAA7164=m
CONFIG_VIDEO_CAFE_CCIC=m
CONFIG_SOC_CAMERA=m
CONFIG_SOC_CAMERA_MT9M001=m
CONFIG_SOC_CAMERA_MT9M111=m
CONFIG_SOC_CAMERA_MT9T031=m
# CONFIG_SOC_CAMERA_MT9T112 is not set
CONFIG_SOC_CAMERA_MT9V022=m
# CONFIG_SOC_CAMERA_RJ54N1 is not set
CONFIG_SOC_CAMERA_TW9910=m
CONFIG_SOC_CAMERA_PLATFORM=m
CONFIG_SOC_CAMERA_OV772X=m
# CONFIG_SOC_CAMERA_OV9640 is not set
CONFIG_V4L_USB_DRIVERS=y
CONFIG_USB_VIDEO_CLASS=m
CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
CONFIG_USB_GSPCA=m
CONFIG_USB_M5602=m
CONFIG_USB_STV06XX=m
CONFIG_USB_GL860=m
# CONFIG_USB_GSPCA_BENQ is not set
CONFIG_USB_GSPCA_CONEX=m
# CONFIG_USB_GSPCA_CPIA1 is not set
CONFIG_USB_GSPCA_ETOMS=m
CONFIG_USB_GSPCA_FINEPIX=m
CONFIG_USB_GSPCA_JEILINJ=m
CONFIG_USB_GSPCA_MARS=m
CONFIG_USB_GSPCA_MR97310A=m
CONFIG_USB_GSPCA_OV519=m
CONFIG_USB_GSPCA_OV534=m
# CONFIG_USB_GSPCA_OV534_9 is not set
CONFIG_USB_GSPCA_PAC207=m
# CONFIG_USB_GSPCA_PAC7302 is not set
CONFIG_USB_GSPCA_PAC7311=m
# CONFIG_USB_GSPCA_SN9C2028 is not set
CONFIG_USB_GSPCA_SN9C20X=m
CONFIG_USB_GSPCA_SONIXB=m
CONFIG_USB_GSPCA_SONIXJ=m
CONFIG_USB_GSPCA_SPCA500=m
CONFIG_USB_GSPCA_SPCA501=m
CONFIG_USB_GSPCA_SPCA505=m
CONFIG_USB_GSPCA_SPCA506=m
CONFIG_USB_GSPCA_SPCA508=m
CONFIG_USB_GSPCA_SPCA561=m
CONFIG_USB_GSPCA_SQ905=m
CONFIG_USB_GSPCA_SQ905C=m
CONFIG_USB_GSPCA_STK014=m
# CONFIG_USB_GSPCA_STV0680 is not set
CONFIG_USB_GSPCA_SUNPLUS=m
CONFIG_USB_GSPCA_T613=m
CONFIG_USB_GSPCA_TV8532=m
CONFIG_USB_GSPCA_VC032X=m
CONFIG_USB_GSPCA_ZC3XX=m
CONFIG_VIDEO_PVRUSB2=m
CONFIG_VIDEO_PVRUSB2_SYSFS=y
CONFIG_VIDEO_PVRUSB2_DVB=y
# CONFIG_VIDEO_PVRUSB2_DEBUGIFC is not set
CONFIG_VIDEO_HDPVR=m
CONFIG_VIDEO_EM28XX=m
CONFIG_VIDEO_EM28XX_ALSA=m
CONFIG_VIDEO_EM28XX_DVB=m
# CONFIG_VIDEO_TLG2300 is not set
CONFIG_VIDEO_CX231XX=m
CONFIG_VIDEO_CX231XX_ALSA=m
CONFIG_VIDEO_CX231XX_DVB=m
CONFIG_VIDEO_USBVISION=m
CONFIG_VIDEO_USBVIDEO=m
CONFIG_USB_VICAM=m
CONFIG_USB_IBMCAM=m
CONFIG_USB_KONICAWC=m
CONFIG_USB_QUICKCAM_MESSENGER=m
CONFIG_USB_ET61X251=m
CONFIG_VIDEO_OVCAMCHIP=m
CONFIG_USB_W9968CF=m
# CONFIG_USB_OV511 is not set
CONFIG_USB_SE401=m
CONFIG_USB_SN9C102=m
CONFIG_USB_STV680=m
CONFIG_USB_ZC0301=m
CONFIG_USB_PWC=m
# CONFIG_USB_PWC_DEBUG is not set
CONFIG_USB_PWC_INPUT_EVDEV=y
CONFIG_USB_ZR364XX=m
CONFIG_USB_STKWEBCAM=m
CONFIG_USB_S2255=m
# CONFIG_V4L_MEM2MEM_DRIVERS is not set
CONFIG_RADIO_ADAPTERS=y
CONFIG_RADIO_CADET=m
CONFIG_RADIO_RTRACK=m
CONFIG_RADIO_RTRACK2=m
CONFIG_RADIO_AZTECH=m
CONFIG_RADIO_GEMTEK=m
CONFIG_RADIO_GEMTEK_PCI=m
CONFIG_RADIO_MAXIRADIO=m
CONFIG_RADIO_MAESTRO=m
# CONFIG_RADIO_MIROPCM20 is not set
CONFIG_RADIO_SF16FMI=m
CONFIG_RADIO_SF16FMR2=m
CONFIG_RADIO_TERRATEC=m
CONFIG_RADIO_TRUST=m
CONFIG_RADIO_TYPHOON=m
CONFIG_RADIO_ZOLTRIX=m
CONFIG_I2C_SI4713=m
CONFIG_RADIO_SI4713=m
CONFIG_USB_DSBR=m
CONFIG_RADIO_SI470X=y
CONFIG_USB_SI470X=m
CONFIG_I2C_SI470X=m
CONFIG_USB_MR800=m
CONFIG_RADIO_TEA5764=m
# CONFIG_RADIO_SAA7706H is not set
# CONFIG_RADIO_TEF6862 is not set
CONFIG_DVB_MAX_ADAPTERS=8
CONFIG_DVB_DYNAMIC_MINORS=y
CONFIG_DVB_CAPTURE_DRIVERS=y

#
# Supported SAA7146 based PCI Adapters
#
CONFIG_TTPCI_EEPROM=m
CONFIG_DVB_AV7110=m
CONFIG_DVB_AV7110_OSD=y
CONFIG_DVB_BUDGET_CORE=m
CONFIG_DVB_BUDGET=m
CONFIG_DVB_BUDGET_CI=m
CONFIG_DVB_BUDGET_AV=m
CONFIG_DVB_BUDGET_PATCH=m

#
# Supported USB Adapters
#
CONFIG_DVB_USB=m
# CONFIG_DVB_USB_DEBUG is not set
CONFIG_DVB_USB_A800=m
CONFIG_DVB_USB_DIBUSB_MB=m
# CONFIG_DVB_USB_DIBUSB_MB_FAULTY is not set
CONFIG_DVB_USB_DIBUSB_MC=m
CONFIG_DVB_USB_DIB0700=m
CONFIG_DVB_USB_UMT_010=m
CONFIG_DVB_USB_CXUSB=m
CONFIG_DVB_USB_M920X=m
CONFIG_DVB_USB_GL861=m
CONFIG_DVB_USB_AU6610=m
CONFIG_DVB_USB_DIGITV=m
CONFIG_DVB_USB_VP7045=m
CONFIG_DVB_USB_VP702X=m
CONFIG_DVB_USB_GP8PSK=m
CONFIG_DVB_USB_NOVA_T_USB2=m
CONFIG_DVB_USB_TTUSB2=m
CONFIG_DVB_USB_DTT200U=m
CONFIG_DVB_USB_OPERA1=m
CONFIG_DVB_USB_AF9005=m
CONFIG_DVB_USB_AF9005_REMOTE=m
CONFIG_DVB_USB_DW2102=m
CONFIG_DVB_USB_CINERGY_T2=m
CONFIG_DVB_USB_ANYSEE=m
CONFIG_DVB_USB_DTV5100=m
CONFIG_DVB_USB_AF9015=m
CONFIG_DVB_USB_CE6230=m
CONFIG_DVB_USB_FRIIO=m
# CONFIG_DVB_USB_EC168 is not set
# CONFIG_DVB_USB_AZ6027 is not set
CONFIG_DVB_TTUSB_BUDGET=m
CONFIG_DVB_TTUSB_DEC=m
CONFIG_SMS_SIANO_MDTV=m

#
# Siano module components
#
CONFIG_SMS_USB_DRV=m
CONFIG_SMS_SDIO_DRV=m

#
# Supported FlexCopII (B2C2) Adapters
#
CONFIG_DVB_B2C2_FLEXCOP=m
CONFIG_DVB_B2C2_FLEXCOP_PCI=m
CONFIG_DVB_B2C2_FLEXCOP_USB=m
# CONFIG_DVB_B2C2_FLEXCOP_DEBUG is not set

#
# Supported BT878 Adapters
#
CONFIG_DVB_BT8XX=m

#
# Supported Pluto2 Adapters
#
CONFIG_DVB_PLUTO2=m

#
# Supported SDMC DM1105 Adapters
#
CONFIG_DVB_DM1105=m

#
# Supported FireWire (IEEE 1394) Adapters
#
CONFIG_DVB_FIREDTV=m
CONFIG_DVB_FIREDTV_FIREWIRE=y
CONFIG_DVB_FIREDTV_IEEE1394=y
CONFIG_DVB_FIREDTV_INPUT=y

#
# Supported Earthsoft PT1 Adapters
#
CONFIG_DVB_PT1=m

#
# Supported Mantis Adapters
#
# CONFIG_MANTIS_CORE is not set

#
# Supported nGene Adapters
#
# CONFIG_DVB_NGENE is not set

#
# Supported DVB Frontends
#
# CONFIG_DVB_FE_CUSTOMISE is not set
CONFIG_DVB_STB0899=m
CONFIG_DVB_STB6100=m
CONFIG_DVB_STV090x=m
CONFIG_DVB_STV6110x=m
CONFIG_DVB_CX24110=m
CONFIG_DVB_CX24123=m
CONFIG_DVB_MT312=m
CONFIG_DVB_ZL10036=m
CONFIG_DVB_ZL10039=m
CONFIG_DVB_S5H1420=m
CONFIG_DVB_STV0288=m
CONFIG_DVB_STB6000=m
CONFIG_DVB_STV0299=m
CONFIG_DVB_STV6110=m
CONFIG_DVB_STV0900=m
CONFIG_DVB_TDA8083=m
CONFIG_DVB_TDA10086=m
CONFIG_DVB_TDA8261=m
CONFIG_DVB_VES1X93=m
CONFIG_DVB_TUNER_ITD1000=m
CONFIG_DVB_TUNER_CX24113=m
CONFIG_DVB_TDA826X=m
CONFIG_DVB_TUA6100=m
CONFIG_DVB_CX24116=m
CONFIG_DVB_SI21XX=m
CONFIG_DVB_DS3000=m
CONFIG_DVB_SP8870=m
CONFIG_DVB_SP887X=m
CONFIG_DVB_CX22700=m
CONFIG_DVB_CX22702=m
CONFIG_DVB_L64781=m
CONFIG_DVB_TDA1004X=m
CONFIG_DVB_NXT6000=m
CONFIG_DVB_MT352=m
CONFIG_DVB_ZL10353=m
CONFIG_DVB_DIB3000MB=m
CONFIG_DVB_DIB3000MC=m
CONFIG_DVB_DIB7000M=m
CONFIG_DVB_DIB7000P=m
CONFIG_DVB_TDA10048=m
CONFIG_DVB_AF9013=m
CONFIG_DVB_VES1820=m
CONFIG_DVB_TDA10021=m
CONFIG_DVB_TDA10023=m
CONFIG_DVB_STV0297=m
CONFIG_DVB_NXT200X=m
CONFIG_DVB_OR51211=m
CONFIG_DVB_OR51132=m
CONFIG_DVB_BCM3510=m
CONFIG_DVB_LGDT330X=m
CONFIG_DVB_LGDT3305=m
CONFIG_DVB_S5H1409=m
CONFIG_DVB_AU8522=m
CONFIG_DVB_S5H1411=m
CONFIG_DVB_DIB8000=m
CONFIG_DVB_PLL=m
CONFIG_DVB_TUNER_DIB0070=m
CONFIG_DVB_TUNER_DIB0090=m
CONFIG_DVB_LNBP21=m
CONFIG_DVB_ISL6405=m
CONFIG_DVB_ISL6421=m
CONFIG_DVB_ISL6423=m
CONFIG_DVB_LGS8GXX=m
CONFIG_DVB_ATBM8830=m
CONFIG_DAB=y
CONFIG_USB_DABUSB=m

#
# Graphics support
#
CONFIG_AGP=m
CONFIG_AGP_ALI=m
CONFIG_AGP_ATI=m
CONFIG_AGP_AMD=m
CONFIG_AGP_AMD64=m
CONFIG_AGP_INTEL=m
CONFIG_AGP_NVIDIA=m
CONFIG_AGP_SIS=m
CONFIG_AGP_SWORKS=m
CONFIG_AGP_VIA=m
CONFIG_AGP_EFFICEON=m
CONFIG_VGA_ARB=y
CONFIG_VGA_ARB_MAX_GPUS=16
# CONFIG_VGA_SWITCHEROO is not set
CONFIG_DRM=m
CONFIG_DRM_KMS_HELPER=m
CONFIG_DRM_TTM=m
CONFIG_DRM_TDFX=m
CONFIG_DRM_R128=m
CONFIG_DRM_RADEON=m
CONFIG_DRM_RADEON_KMS=y
CONFIG_DRM_I810=m
CONFIG_DRM_I830=m
CONFIG_DRM_I915=m
CONFIG_DRM_I915_KMS=y
CONFIG_DRM_MGA=m
CONFIG_DRM_SIS=m
CONFIG_DRM_VIA=m
CONFIG_DRM_SAVAGE=m
CONFIG_VGASTATE=m
CONFIG_VIDEO_OUTPUT_CONTROL=m
CONFIG_FB=y
CONFIG_FIRMWARE_EDID=y
CONFIG_FB_DDC=m
# CONFIG_FB_BOOT_VESA_SUPPORT is not set
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
CONFIG_FB_SYS_FILLRECT=m
CONFIG_FB_SYS_COPYAREA=m
CONFIG_FB_SYS_IMAGEBLIT=m
# CONFIG_FB_FOREIGN_ENDIAN is not set
CONFIG_FB_SYS_FOPS=m
CONFIG_FB_DEFERRED_IO=y
CONFIG_FB_HECUBA=m
CONFIG_FB_SVGALIB=m
# CONFIG_FB_MACMODES is not set
CONFIG_FB_BACKLIGHT=y
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y

#
# Frame buffer hardware drivers
#
CONFIG_FB_CIRRUS=m
CONFIG_FB_PM2=m
CONFIG_FB_PM2_FIFO_DISCONNECT=y
CONFIG_FB_CYBER2000=m
CONFIG_FB_ARC=m
CONFIG_FB_ASILIANT=y
CONFIG_FB_IMSTT=y
CONFIG_FB_VGA16=m
CONFIG_FB_UVESA=m
# CONFIG_FB_VESA is not set
CONFIG_FB_EFI=y
CONFIG_FB_N411=m
CONFIG_FB_HGA=m
# CONFIG_FB_HGA_ACCEL is not set
CONFIG_FB_S1D13XXX=m
CONFIG_FB_NVIDIA=m
CONFIG_FB_NVIDIA_I2C=y
# CONFIG_FB_NVIDIA_DEBUG is not set
CONFIG_FB_NVIDIA_BACKLIGHT=y
CONFIG_FB_RIVA=m
CONFIG_FB_RIVA_I2C=y
# CONFIG_FB_RIVA_DEBUG is not set
CONFIG_FB_RIVA_BACKLIGHT=y
CONFIG_FB_I810=m
# CONFIG_FB_I810_GTF is not set
CONFIG_FB_LE80578=m
CONFIG_FB_CARILLO_RANCH=m
CONFIG_FB_MATROX=m
CONFIG_FB_MATROX_MILLENIUM=y
CONFIG_FB_MATROX_MYSTIQUE=y
CONFIG_FB_MATROX_G=y
CONFIG_FB_MATROX_I2C=m
CONFIG_FB_MATROX_MAVEN=m
CONFIG_FB_RADEON=m
CONFIG_FB_RADEON_I2C=y
CONFIG_FB_RADEON_BACKLIGHT=y
# CONFIG_FB_RADEON_DEBUG is not set
CONFIG_FB_ATY128=m
CONFIG_FB_ATY128_BACKLIGHT=y
CONFIG_FB_ATY=m
CONFIG_FB_ATY_CT=y
CONFIG_FB_ATY_GENERIC_LCD=y
CONFIG_FB_ATY_GX=y
CONFIG_FB_ATY_BACKLIGHT=y
CONFIG_FB_S3=m
CONFIG_FB_SAVAGE=m
CONFIG_FB_SAVAGE_I2C=y
CONFIG_FB_SAVAGE_ACCEL=y
CONFIG_FB_SIS=m
CONFIG_FB_SIS_300=y
CONFIG_FB_SIS_315=y
CONFIG_FB_VIA=m
# CONFIG_FB_VIA_DIRECT_PROCFS is not set
CONFIG_FB_NEOMAGIC=m
CONFIG_FB_KYRO=m
CONFIG_FB_3DFX=m
# CONFIG_FB_3DFX_ACCEL is not set
CONFIG_FB_3DFX_I2C=y
CONFIG_FB_VOODOO1=m
CONFIG_FB_VT8623=m
CONFIG_FB_TRIDENT=m
CONFIG_FB_ARK=m
CONFIG_FB_PM3=m
CONFIG_FB_CARMINE=m
CONFIG_FB_CARMINE_DRAM_EVAL=y
# CONFIG_CARMINE_DRAM_CUSTOM is not set
CONFIG_FB_GEODE=y
CONFIG_FB_GEODE_LX=m
CONFIG_FB_GEODE_GX=m
CONFIG_FB_GEODE_GX1=m
CONFIG_FB_TMIO=m
CONFIG_FB_TMIO_ACCELL=y
CONFIG_FB_SM501=m
# CONFIG_FB_VIRTUAL is not set
CONFIG_FB_METRONOME=m
CONFIG_FB_MB862XX=m
CONFIG_FB_MB862XX_PCI_GDC=y
CONFIG_FB_BROADSHEET=m
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=m
# CONFIG_LCD_L4F00242T03 is not set
CONFIG_LCD_LMS283GF05=m
CONFIG_LCD_LTV350QV=m
CONFIG_LCD_ILI9320=m
CONFIG_LCD_TDO24M=m
CONFIG_LCD_VGG2432A4=m
CONFIG_LCD_PLATFORM=m
# CONFIG_LCD_S6E63M0 is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=y
CONFIG_BACKLIGHT_GENERIC=m
CONFIG_BACKLIGHT_PROGEAR=m
CONFIG_BACKLIGHT_CARILLO_RANCH=m
CONFIG_BACKLIGHT_DA903X=m
CONFIG_BACKLIGHT_MBP_NVIDIA=m
CONFIG_BACKLIGHT_SAHARA=m
# CONFIG_BACKLIGHT_ADP8860 is not set
# CONFIG_BACKLIGHT_PCF50633 is not set

#
# Display device support
#
CONFIG_DISPLAY_SUPPORT=m

#
# Display hardware drivers
#

#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
# CONFIG_VGACON_SOFT_SCROLLBACK is not set
CONFIG_MDA_CONSOLE=m
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=m
# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
# CONFIG_LOGO is not set
CONFIG_SOUND=m
CONFIG_SOUND_OSS_CORE=y
CONFIG_SOUND_OSS_CORE_PRECLAIM=y
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
CONFIG_SND_HWDEP=m
CONFIG_SND_RAWMIDI=m
CONFIG_SND_JACK=y
CONFIG_SND_SEQUENCER=m
CONFIG_SND_SEQ_DUMMY=m
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
CONFIG_SND_PCM_OSS_PLUGINS=y
CONFIG_SND_SEQUENCER_OSS=y
CONFIG_SND_HRTIMER=m
CONFIG_SND_SEQ_HRTIMER_DEFAULT=y
CONFIG_SND_DYNAMIC_MINORS=y
CONFIG_SND_SUPPORT_OLD_API=y
CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
CONFIG_SND_VMASTER=y
CONFIG_SND_DMA_SGBUF=y
CONFIG_SND_RAWMIDI_SEQ=m
CONFIG_SND_OPL3_LIB_SEQ=m
CONFIG_SND_OPL4_LIB_SEQ=m
CONFIG_SND_SBAWE_SEQ=m
CONFIG_SND_EMU10K1_SEQ=m
CONFIG_SND_MPU401_UART=m
CONFIG_SND_OPL3_LIB=m
CONFIG_SND_OPL4_LIB=m
CONFIG_SND_VX_LIB=m
CONFIG_SND_AC97_CODEC=m
CONFIG_SND_DRIVERS=y
CONFIG_SND_PCSP=m
CONFIG_SND_DUMMY=m
CONFIG_SND_VIRMIDI=m
CONFIG_SND_MTPAV=m
CONFIG_SND_MTS64=m
CONFIG_SND_SERIAL_U16550=m
CONFIG_SND_MPU401=m
CONFIG_SND_PORTMAN2X4=m
CONFIG_SND_AC97_POWER_SAVE=y
CONFIG_SND_AC97_POWER_SAVE_DEFAULT=0
CONFIG_SND_WSS_LIB=m
CONFIG_SND_SB_COMMON=m
CONFIG_SND_SB8_DSP=m
CONFIG_SND_SB16_DSP=m
CONFIG_SND_ISA=y
CONFIG_SND_ADLIB=m
CONFIG_SND_AD1816A=m
CONFIG_SND_AD1848=m
CONFIG_SND_ALS100=m
CONFIG_SND_AZT2320=m
CONFIG_SND_CMI8330=m
CONFIG_SND_CS4231=m
CONFIG_SND_CS4236=m
CONFIG_SND_ES1688=m
CONFIG_SND_ES18XX=m
CONFIG_SND_SC6000=m
CONFIG_SND_GUSCLASSIC=m
CONFIG_SND_GUSEXTREME=m
CONFIG_SND_GUSMAX=m
CONFIG_SND_INTERWAVE=m
CONFIG_SND_INTERWAVE_STB=m
# CONFIG_SND_JAZZ16 is not set
CONFIG_SND_OPL3SA2=m
CONFIG_SND_OPTI92X_AD1848=m
CONFIG_SND_OPTI92X_CS4231=m
CONFIG_SND_OPTI93X=m
CONFIG_SND_MIRO=m
CONFIG_SND_SB8=m
CONFIG_SND_SB16=m
CONFIG_SND_SBAWE=m
CONFIG_SND_SB16_CSP=y
CONFIG_SND_SGALAXY=m
CONFIG_SND_SSCAPE=m
CONFIG_SND_WAVEFRONT=m
CONFIG_SND_MSND_PINNACLE=m
CONFIG_SND_MSND_CLASSIC=m
CONFIG_SND_PCI=y
CONFIG_SND_AD1889=m
CONFIG_SND_ALS300=m
CONFIG_SND_ALS4000=m
CONFIG_SND_ALI5451=m
# CONFIG_SND_ASIHPI is not set
CONFIG_SND_ATIIXP=m
CONFIG_SND_ATIIXP_MODEM=m
CONFIG_SND_AU8810=m
CONFIG_SND_AU8820=m
CONFIG_SND_AU8830=m
CONFIG_SND_AW2=m
CONFIG_SND_AZT3328=m
CONFIG_SND_BT87X=m
# CONFIG_SND_BT87X_OVERCLOCK is not set
CONFIG_SND_CA0106=m
CONFIG_SND_CMIPCI=m
CONFIG_SND_OXYGEN_LIB=m
CONFIG_SND_OXYGEN=m
CONFIG_SND_CS4281=m
CONFIG_SND_CS46XX=m
CONFIG_SND_CS46XX_NEW_DSP=y
CONFIG_SND_CS5530=m
CONFIG_SND_CS5535AUDIO=m
CONFIG_SND_CTXFI=m
CONFIG_SND_DARLA20=m
CONFIG_SND_GINA20=m
CONFIG_SND_LAYLA20=m
CONFIG_SND_DARLA24=m
CONFIG_SND_GINA24=m
CONFIG_SND_LAYLA24=m
CONFIG_SND_MONA=m
CONFIG_SND_MIA=m
CONFIG_SND_ECHO3G=m
CONFIG_SND_INDIGO=m
CONFIG_SND_INDIGOIO=m
CONFIG_SND_INDIGODJ=m
CONFIG_SND_INDIGOIOX=m
CONFIG_SND_INDIGODJX=m
CONFIG_SND_EMU10K1=m
CONFIG_SND_EMU10K1X=m
CONFIG_SND_ENS1370=m
CONFIG_SND_ENS1371=m
CONFIG_SND_ES1938=m
CONFIG_SND_ES1968=m
# CONFIG_SND_ES1968_INPUT is not set
CONFIG_SND_FM801=m
CONFIG_SND_FM801_TEA575X_BOOL=y
CONFIG_SND_FM801_TEA575X=m
CONFIG_SND_HDA_INTEL=m
CONFIG_SND_HDA_HWDEP=y
CONFIG_SND_HDA_RECONFIG=y
CONFIG_SND_HDA_INPUT_BEEP=y
CONFIG_SND_HDA_INPUT_BEEP_MODE=1
CONFIG_SND_HDA_INPUT_JACK=y
CONFIG_SND_HDA_PATCH_LOADER=y
CONFIG_SND_HDA_CODEC_REALTEK=y
CONFIG_SND_HDA_CODEC_ANALOG=y
CONFIG_SND_HDA_CODEC_SIGMATEL=y
CONFIG_SND_HDA_CODEC_VIA=y
CONFIG_SND_HDA_CODEC_ATIHDMI=y
CONFIG_SND_HDA_CODEC_NVHDMI=y
CONFIG_SND_HDA_CODEC_INTELHDMI=y
CONFIG_SND_HDA_ELD=y
CONFIG_SND_HDA_CODEC_CIRRUS=y
CONFIG_SND_HDA_CODEC_CONEXANT=y
CONFIG_SND_HDA_CODEC_CA0110=y
CONFIG_SND_HDA_CODEC_CMEDIA=y
CONFIG_SND_HDA_CODEC_SI3054=y
CONFIG_SND_HDA_GENERIC=y
CONFIG_SND_HDA_POWER_SAVE=y
CONFIG_SND_HDA_POWER_SAVE_DEFAULT=0
CONFIG_SND_HDSP=m
CONFIG_SND_HDSPM=m
CONFIG_SND_HIFIER=m
CONFIG_SND_ICE1712=m
CONFIG_SND_ICE1724=m
CONFIG_SND_INTEL8X0=m
CONFIG_SND_INTEL8X0M=m
CONFIG_SND_KORG1212=m
CONFIG_SND_LX6464ES=m
CONFIG_SND_MAESTRO3=m
# CONFIG_SND_MAESTRO3_INPUT is not set
CONFIG_SND_MIXART=m
CONFIG_SND_NM256=m
CONFIG_SND_PCXHR=m
CONFIG_SND_RIPTIDE=m
CONFIG_SND_RME32=m
CONFIG_SND_RME96=m
CONFIG_SND_RME9652=m
CONFIG_SND_SIS7019=m
CONFIG_SND_SONICVIBES=m
CONFIG_SND_TRIDENT=m
CONFIG_SND_VIA82XX=m
CONFIG_SND_VIA82XX_MODEM=m
CONFIG_SND_VIRTUOSO=m
CONFIG_SND_VX222=m
CONFIG_SND_YMFPCI=m
CONFIG_SND_SPI=y
CONFIG_SND_USB=y
CONFIG_SND_USB_AUDIO=m
# CONFIG_SND_USB_UA101 is not set
CONFIG_SND_USB_USX2Y=m
CONFIG_SND_USB_CAIAQ=m
CONFIG_SND_USB_CAIAQ_INPUT=y
CONFIG_SND_USB_US122L=m
CONFIG_SND_PCMCIA=y
CONFIG_SND_VXPOCKET=m
CONFIG_SND_PDAUDIOCF=m
CONFIG_SND_SOC=m
CONFIG_SND_SOC_I2C_AND_SPI=m
CONFIG_SND_SOC_ALL_CODECS=m
CONFIG_SND_SOC_WM_HUBS=m
CONFIG_SND_SOC_AD1836=m
CONFIG_SND_SOC_AD193X=m
CONFIG_SND_SOC_AD73311=m
CONFIG_SND_SOC_ADS117X=m
CONFIG_SND_SOC_AK4104=m
CONFIG_SND_SOC_AK4535=m
CONFIG_SND_SOC_AK4642=m
CONFIG_SND_SOC_AK4671=m
CONFIG_SND_SOC_CS4270=m
CONFIG_SND_SOC_DA7210=m
CONFIG_SND_SOC_L3=m
CONFIG_SND_SOC_PCM3008=m
CONFIG_SND_SOC_SPDIF=m
CONFIG_SND_SOC_SSM2602=m
CONFIG_SND_SOC_TLV320AIC23=m
CONFIG_SND_SOC_TLV320AIC26=m
CONFIG_SND_SOC_TLV320AIC3X=m
CONFIG_SND_SOC_TLV320DAC33=m
CONFIG_SND_SOC_TWL4030=m
CONFIG_SND_SOC_TWL6040=m
CONFIG_SND_SOC_UDA134X=m
CONFIG_SND_SOC_UDA1380=m
CONFIG_SND_SOC_WM8400=m
CONFIG_SND_SOC_WM8510=m
CONFIG_SND_SOC_WM8523=m
CONFIG_SND_SOC_WM8580=m
CONFIG_SND_SOC_WM8711=m
CONFIG_SND_SOC_WM8727=m
CONFIG_SND_SOC_WM8728=m
CONFIG_SND_SOC_WM8731=m
CONFIG_SND_SOC_WM8750=m
CONFIG_SND_SOC_WM8753=m
CONFIG_SND_SOC_WM8776=m
CONFIG_SND_SOC_WM8900=m
CONFIG_SND_SOC_WM8903=m
CONFIG_SND_SOC_WM8904=m
CONFIG_SND_SOC_WM8940=m
CONFIG_SND_SOC_WM8955=m
CONFIG_SND_SOC_WM8960=m
CONFIG_SND_SOC_WM8961=m
CONFIG_SND_SOC_WM8971=m
CONFIG_SND_SOC_WM8974=m
CONFIG_SND_SOC_WM8978=m
CONFIG_SND_SOC_WM8988=m
CONFIG_SND_SOC_WM8990=m
CONFIG_SND_SOC_WM8993=m
CONFIG_SND_SOC_WM9081=m
CONFIG_SND_SOC_MAX9877=m
CONFIG_SND_SOC_TPA6130A2=m
CONFIG_SND_SOC_WM2000=m
CONFIG_SND_SOC_WM9090=m
CONFIG_SOUND_PRIME=m
CONFIG_SOUND_MSNDCLAS=m
CONFIG_MSNDCLAS_INIT_FILE="/etc/sound/msndinit.bin"
CONFIG_MSNDCLAS_PERM_FILE="/etc/sound/msndperm.bin"
CONFIG_SOUND_MSNDPIN=m
CONFIG_MSNDPIN_INIT_FILE="/etc/sound/pndspini.bin"
CONFIG_MSNDPIN_PERM_FILE="/etc/sound/pndsperm.bin"
CONFIG_SOUND_OSS=m
# CONFIG_SOUND_TRACEINIT is not set
CONFIG_SOUND_DMAP=y
CONFIG_SOUND_VMIDI=m
CONFIG_SOUND_TRIX=m
CONFIG_SOUND_MSS=m
CONFIG_SOUND_MPU401=m
CONFIG_SOUND_PAS=m
CONFIG_SOUND_PSS=m
CONFIG_PSS_MIXER=y
# CONFIG_PSS_HAVE_BOOT is not set
CONFIG_SOUND_SB=m
CONFIG_SOUND_YM3812=m
CONFIG_SOUND_UART6850=m
CONFIG_SOUND_AEDSP16=m
CONFIG_SC6600=y
CONFIG_SC6600_JOY=y
CONFIG_SC6600_CDROM=4
CONFIG_SC6600_CDROMBASE=0
CONFIG_SOUND_KAHLUA=m
CONFIG_AC97_BUS=m
CONFIG_HID_SUPPORT=y
CONFIG_HID=m
CONFIG_HIDRAW=y

#
# USB Input Devices
#
CONFIG_USB_HID=m
CONFIG_HID_PID=y
CONFIG_USB_HIDDEV=y

#
# Special HID drivers
#
CONFIG_HID_3M_PCT=m
CONFIG_HID_A4TECH=m
CONFIG_HID_APPLE=m
CONFIG_HID_BELKIN=m
# CONFIG_HID_CANDO is not set
CONFIG_HID_CHERRY=m
CONFIG_HID_CHICONY=m
# CONFIG_HID_PRODIKEYS is not set
CONFIG_HID_CYPRESS=m
CONFIG_HID_DRAGONRISE=m
CONFIG_DRAGONRISE_FF=y
# CONFIG_HID_EGALAX is not set
CONFIG_HID_EZKEY=m
CONFIG_HID_KYE=m
CONFIG_HID_GYRATION=m
CONFIG_HID_TWINHAN=m
CONFIG_HID_KENSINGTON=m
CONFIG_HID_LOGITECH=m
CONFIG_LOGITECH_FF=y
CONFIG_LOGIRUMBLEPAD2_FF=y
# CONFIG_LOGIG940_FF is not set
# CONFIG_HID_MAGICMOUSE is not set
CONFIG_HID_MICROSOFT=m
CONFIG_HID_MOSART=m
CONFIG_HID_MONTEREY=m
CONFIG_HID_NTRIG=m
CONFIG_HID_ORTEK=m
CONFIG_HID_PANTHERLORD=m
CONFIG_PANTHERLORD_FF=y
CONFIG_HID_PETALYNX=m
# CONFIG_HID_PICOLCD is not set
CONFIG_HID_QUANTA=m
# CONFIG_HID_ROCCAT is not set
# CONFIG_HID_ROCCAT_KONE is not set
CONFIG_HID_SAMSUNG=m
CONFIG_HID_SONY=m
CONFIG_HID_STANTUM=m
CONFIG_HID_SUNPLUS=m
CONFIG_HID_GREENASIA=m
CONFIG_GREENASIA_FF=y
CONFIG_HID_SMARTJOYPLUS=m
CONFIG_SMARTJOYPLUS_FF=y
CONFIG_HID_TOPSEED=m
CONFIG_HID_THRUSTMASTER=m
CONFIG_THRUSTMASTER_FF=y
CONFIG_HID_WACOM=m
# CONFIG_HID_WACOM_POWER_SUPPLY is not set
CONFIG_HID_ZEROPLUS=m
CONFIG_ZEROPLUS_FF=y
# CONFIG_HID_ZYDACRON is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set

#
# Miscellaneous USB options
#
# CONFIG_USB_DEVICEFS is not set
# CONFIG_USB_DEVICE_CLASS is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
CONFIG_USB_SUSPEND=y
# CONFIG_USB_OTG is not set
CONFIG_USB_MON=y
CONFIG_USB_WUSB=m
CONFIG_USB_WUSB_CBAF=m
# CONFIG_USB_WUSB_CBAF_DEBUG is not set

#
# USB Host Controller Drivers
#
CONFIG_USB_C67X00_HCD=m
CONFIG_USB_XHCI_HCD=m
# CONFIG_USB_XHCI_HCD_DEBUGGING is not set
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_EHCI_TT_NEWSCHED=y
CONFIG_USB_OXU210HP_HCD=m
CONFIG_USB_ISP116X_HCD=m
CONFIG_USB_ISP1760_HCD=m
CONFIG_USB_ISP1362_HCD=m
CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_UHCI_HCD=y
CONFIG_USB_U132_HCD=m
CONFIG_USB_SL811_HCD=m
CONFIG_USB_SL811_CS=m
CONFIG_USB_R8A66597_HCD=m
CONFIG_USB_WHCI_HCD=m
CONFIG_USB_HWA_HCD=m
# CONFIG_USB_GADGET_MUSB_HDRC is not set

#
# USB Device Class drivers
#
CONFIG_USB_ACM=m
CONFIG_USB_PRINTER=m
CONFIG_USB_WDM=m
CONFIG_USB_TMC=m

#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#

#
# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
CONFIG_USB_STORAGE_DATAFAB=m
CONFIG_USB_STORAGE_FREECOM=m
CONFIG_USB_STORAGE_ISD200=m
CONFIG_USB_STORAGE_USBAT=m
CONFIG_USB_STORAGE_SDDR09=m
CONFIG_USB_STORAGE_SDDR55=m
CONFIG_USB_STORAGE_JUMPSHOT=m
CONFIG_USB_STORAGE_ALAUDA=m
CONFIG_USB_STORAGE_ONETOUCH=m
CONFIG_USB_STORAGE_KARMA=m
CONFIG_USB_STORAGE_CYPRESS_ATACB=m
# CONFIG_USB_LIBUSUAL is not set

#
# USB Imaging devices
#
CONFIG_USB_MDC800=m
CONFIG_USB_MICROTEK=m

#
# USB port drivers
#
CONFIG_USB_USS720=m
CONFIG_USB_SERIAL=m
CONFIG_USB_EZUSB=y
CONFIG_USB_SERIAL_GENERIC=y
CONFIG_USB_SERIAL_AIRCABLE=m
CONFIG_USB_SERIAL_ARK3116=m
CONFIG_USB_SERIAL_BELKIN=m
CONFIG_USB_SERIAL_CH341=m
CONFIG_USB_SERIAL_WHITEHEAT=m
CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
CONFIG_USB_SERIAL_CP210X=m
CONFIG_USB_SERIAL_CYPRESS_M8=m
CONFIG_USB_SERIAL_EMPEG=m
CONFIG_USB_SERIAL_FTDI_SIO=m
CONFIG_USB_SERIAL_FUNSOFT=m
CONFIG_USB_SERIAL_VISOR=m
CONFIG_USB_SERIAL_IPAQ=m
CONFIG_USB_SERIAL_IR=m
CONFIG_USB_SERIAL_EDGEPORT=m
CONFIG_USB_SERIAL_EDGEPORT_TI=m
CONFIG_USB_SERIAL_GARMIN=m
CONFIG_USB_SERIAL_IPW=m
CONFIG_USB_SERIAL_IUU=m
CONFIG_USB_SERIAL_KEYSPAN_PDA=m
CONFIG_USB_SERIAL_KEYSPAN=m
CONFIG_USB_SERIAL_KEYSPAN_MPR=y
CONFIG_USB_SERIAL_KEYSPAN_USA28=y
CONFIG_USB_SERIAL_KEYSPAN_USA28X=y
CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y
CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y
CONFIG_USB_SERIAL_KEYSPAN_USA19=y
CONFIG_USB_SERIAL_KEYSPAN_USA18X=y
CONFIG_USB_SERIAL_KEYSPAN_USA19W=y
CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y
CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y
CONFIG_USB_SERIAL_KEYSPAN_USA49W=y
CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
CONFIG_USB_SERIAL_KLSI=m
CONFIG_USB_SERIAL_KOBIL_SCT=m
CONFIG_USB_SERIAL_MCT_U232=m
CONFIG_USB_SERIAL_MOS7720=m
# CONFIG_USB_SERIAL_MOS7715_PARPORT is not set
CONFIG_USB_SERIAL_MOS7840=m
CONFIG_USB_SERIAL_MOTOROLA=m
CONFIG_USB_SERIAL_NAVMAN=m
CONFIG_USB_SERIAL_PL2303=m
CONFIG_USB_SERIAL_OTI6858=m
# CONFIG_USB_SERIAL_QCAUX is not set
CONFIG_USB_SERIAL_QUALCOMM=m
CONFIG_USB_SERIAL_SPCP8X5=m
CONFIG_USB_SERIAL_HP4X=m
CONFIG_USB_SERIAL_SAFE=m
# CONFIG_USB_SERIAL_SAFE_PADDED is not set
CONFIG_USB_SERIAL_SIEMENS_MPI=m
CONFIG_USB_SERIAL_SIERRAWIRELESS=m
CONFIG_USB_SERIAL_SYMBOL=m
CONFIG_USB_SERIAL_TI=m
CONFIG_USB_SERIAL_CYBERJACK=m
CONFIG_USB_SERIAL_XIRCOM=m
CONFIG_USB_SERIAL_WWAN=m
CONFIG_USB_SERIAL_OPTION=m
CONFIG_USB_SERIAL_OMNINET=m
CONFIG_USB_SERIAL_OPTICON=m
# CONFIG_USB_SERIAL_VIVOPAY_SERIAL is not set
# CONFIG_USB_SERIAL_ZIO is not set
CONFIG_USB_SERIAL_DEBUG=m

#
# USB Miscellaneous drivers
#
CONFIG_USB_EMI62=m
CONFIG_USB_EMI26=m
CONFIG_USB_ADUTUX=m
CONFIG_USB_SEVSEG=m
CONFIG_USB_RIO500=m
CONFIG_USB_LEGOTOWER=m
CONFIG_USB_LCD=m
CONFIG_USB_LED=m
CONFIG_USB_CYPRESS_CY7C63=m
CONFIG_USB_CYTHERM=m
CONFIG_USB_IDMOUSE=m
CONFIG_USB_FTDI_ELAN=m
CONFIG_USB_APPLEDISPLAY=m
CONFIG_USB_SISUSBVGA=m
# CONFIG_USB_SISUSBVGA_CON is not set
CONFIG_USB_LD=m
CONFIG_USB_TRANCEVIBRATOR=m
CONFIG_USB_IOWARRIOR=m
CONFIG_USB_TEST=m
CONFIG_USB_ISIGHTFW=m
CONFIG_USB_ATM=m
CONFIG_USB_SPEEDTOUCH=m
CONFIG_USB_CXACRU=m
CONFIG_USB_UEAGLEATM=m
CONFIG_USB_XUSBATM=m
CONFIG_USB_GADGET=m
# CONFIG_USB_GADGET_DEBUG_FILES is not set
# CONFIG_USB_GADGET_DEBUG_FS is not set
CONFIG_USB_GADGET_VBUS_DRAW=2
CONFIG_USB_GADGET_SELECTED=y
# CONFIG_USB_GADGET_AT91 is not set
# CONFIG_USB_GADGET_ATMEL_USBA is not set
# CONFIG_USB_GADGET_FSL_USB2 is not set
# CONFIG_USB_GADGET_LH7A40X is not set
# CONFIG_USB_GADGET_OMAP is not set
# CONFIG_USB_GADGET_PXA25X is not set
# CONFIG_USB_GADGET_R8A66597 is not set
# CONFIG_USB_GADGET_PXA27X is not set
# CONFIG_USB_GADGET_S3C_HSOTG is not set
# CONFIG_USB_GADGET_IMX is not set
# CONFIG_USB_GADGET_S3C2410 is not set
# CONFIG_USB_GADGET_M66592 is not set
# CONFIG_USB_GADGET_AMD5536UDC is not set
# CONFIG_USB_GADGET_FSL_QE is not set
# CONFIG_USB_GADGET_CI13XXX is not set
# CONFIG_USB_GADGET_NET2280 is not set
# CONFIG_USB_GADGET_GOKU is not set
# CONFIG_USB_GADGET_LANGWELL is not set
CONFIG_USB_GADGET_DUMMY_HCD=y
CONFIG_USB_DUMMY_HCD=m
CONFIG_USB_GADGET_DUALSPEED=y
CONFIG_USB_ZERO=m
CONFIG_USB_AUDIO=m
CONFIG_USB_ETH=m
CONFIG_USB_ETH_RNDIS=y
# CONFIG_USB_ETH_EEM is not set
CONFIG_USB_GADGETFS=m
# CONFIG_USB_FUNCTIONFS is not set
CONFIG_USB_FILE_STORAGE=m
# CONFIG_USB_FILE_STORAGE_TEST is not set
# CONFIG_USB_MASS_STORAGE is not set
CONFIG_USB_G_SERIAL=m
CONFIG_USB_MIDI_GADGET=m
CONFIG_USB_G_PRINTER=m
CONFIG_USB_CDC_COMPOSITE=m
# CONFIG_USB_G_NOKIA is not set
# CONFIG_USB_G_MULTI is not set
# CONFIG_USB_G_HID is not set
# CONFIG_USB_G_WEBCAM is not set

#
# OTG and related infrastructure
#
CONFIG_USB_OTG_UTILS=y
CONFIG_USB_GPIO_VBUS=m
CONFIG_TWL4030_USB=m
CONFIG_NOP_USB_XCEIV=m
CONFIG_UWB=m
CONFIG_UWB_HWA=m
CONFIG_UWB_WHCI=m
CONFIG_UWB_WLP=m
CONFIG_UWB_I1480U=m
CONFIG_UWB_I1480U_WLP=m
CONFIG_MMC=y
# CONFIG_MMC_DEBUG is not set
# CONFIG_MMC_UNSAFE_RESUME is not set

#
# MMC/SD/SDIO Card Drivers
#
CONFIG_MMC_BLOCK=m
CONFIG_MMC_BLOCK_BOUNCE=y
CONFIG_SDIO_UART=m
# CONFIG_MMC_TEST is not set

#
# MMC/SD/SDIO Host Controller Drivers
#
CONFIG_MMC_SDHCI=m
CONFIG_MMC_SDHCI_PCI=m
# CONFIG_MMC_RICOH_MMC is not set
CONFIG_MMC_SDHCI_PLTFM=m
CONFIG_MMC_WBSD=m
CONFIG_MMC_TIFM_SD=m
CONFIG_MMC_SDRICOH_CS=m
CONFIG_MMC_CB710=m
CONFIG_MMC_VIA_SDMMC=m
CONFIG_MEMSTICK=m
# CONFIG_MEMSTICK_DEBUG is not set

#
# MemoryStick drivers
#
# CONFIG_MEMSTICK_UNSAFE_RESUME is not set
CONFIG_MSPRO_BLOCK=m

#
# MemoryStick Host Controller Drivers
#
CONFIG_MEMSTICK_TIFM_MS=m
CONFIG_MEMSTICK_JMICRON_38X=m
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=m

#
# LED drivers
#
CONFIG_LEDS_NET48XX=m
CONFIG_LEDS_WRAP=m
CONFIG_LEDS_ALIX2=m
CONFIG_LEDS_PCA9532=m
CONFIG_LEDS_GPIO=m
CONFIG_LEDS_GPIO_PLATFORM=y
CONFIG_LEDS_LP3944=m
# CONFIG_LEDS_CLEVO_MAIL is not set
CONFIG_LEDS_PCA955X=m
CONFIG_LEDS_DA903X=m
CONFIG_LEDS_DAC124S085=m
# CONFIG_LEDS_REGULATOR is not set
CONFIG_LEDS_BD2802=m
# CONFIG_LEDS_INTEL_SS4200 is not set
# CONFIG_LEDS_LT3593 is not set
CONFIG_LEDS_DELL_NETBOOKS=m
# CONFIG_LEDS_MC13783 is not set
CONFIG_LEDS_TRIGGERS=y

#
# LED Triggers
#
CONFIG_LEDS_TRIGGER_TIMER=m
CONFIG_LEDS_TRIGGER_HEARTBEAT=m
CONFIG_LEDS_TRIGGER_BACKLIGHT=m
CONFIG_LEDS_TRIGGER_GPIO=m
CONFIG_LEDS_TRIGGER_DEFAULT_ON=m

#
# iptables trigger is under Netfilter config (LED target)
#
# CONFIG_ACCESSIBILITY is not set
CONFIG_INFINIBAND=m
CONFIG_INFINIBAND_USER_MAD=m
CONFIG_INFINIBAND_USER_ACCESS=m
CONFIG_INFINIBAND_USER_MEM=y
CONFIG_INFINIBAND_ADDR_TRANS=y
CONFIG_INFINIBAND_MTHCA=m
CONFIG_INFINIBAND_MTHCA_DEBUG=y
CONFIG_INFINIBAND_AMSO1100=m
CONFIG_INFINIBAND_AMSO1100_DEBUG=y
CONFIG_INFINIBAND_CXGB3=m
# CONFIG_INFINIBAND_CXGB3_DEBUG is not set
CONFIG_MLX4_INFINIBAND=m
# CONFIG_INFINIBAND_NES is not set
CONFIG_INFINIBAND_IPOIB=m
CONFIG_INFINIBAND_IPOIB_CM=y
CONFIG_INFINIBAND_IPOIB_DEBUG=y
# CONFIG_INFINIBAND_IPOIB_DEBUG_DATA is not set
CONFIG_INFINIBAND_SRP=m
CONFIG_INFINIBAND_ISER=m
CONFIG_EDAC=y

#
# Reporting subsystems
#
# CONFIG_EDAC_DEBUG is not set
CONFIG_EDAC_DECODE_MCE=m
CONFIG_EDAC_MM_EDAC=m
CONFIG_EDAC_AMD76X=m
CONFIG_EDAC_E7XXX=m
CONFIG_EDAC_E752X=m
CONFIG_EDAC_I82875P=m
CONFIG_EDAC_I82975X=m
CONFIG_EDAC_I3000=m
CONFIG_EDAC_I3200=m
CONFIG_EDAC_X38=m
CONFIG_EDAC_I5400=m
# CONFIG_EDAC_I7CORE is not set
CONFIG_EDAC_I82860=m
CONFIG_EDAC_R82600=m
CONFIG_EDAC_I5000=m
CONFIG_EDAC_I5100=m
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
# CONFIG_RTC_DEBUG is not set

#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
CONFIG_RTC_INTF_DEV_UIE_EMUL=y
CONFIG_RTC_DRV_TEST=m

#
# I2C RTC drivers
#
CONFIG_RTC_DRV_DS1307=m
CONFIG_RTC_DRV_DS1374=m
CONFIG_RTC_DRV_DS1672=m
CONFIG_RTC_DRV_MAX6900=m
CONFIG_RTC_DRV_RS5C372=m
CONFIG_RTC_DRV_ISL1208=m
CONFIG_RTC_DRV_X1205=m
CONFIG_RTC_DRV_PCF8563=m
CONFIG_RTC_DRV_PCF8583=m
CONFIG_RTC_DRV_M41T80=m
CONFIG_RTC_DRV_M41T80_WDT=y
# CONFIG_RTC_DRV_BQ32K is not set
CONFIG_RTC_DRV_TWL4030=m
CONFIG_RTC_DRV_S35390A=m
CONFIG_RTC_DRV_FM3130=m
CONFIG_RTC_DRV_RX8581=m
CONFIG_RTC_DRV_RX8025=m

#
# SPI RTC drivers
#
CONFIG_RTC_DRV_M41T94=m
CONFIG_RTC_DRV_DS1305=m
CONFIG_RTC_DRV_DS1390=m
CONFIG_RTC_DRV_MAX6902=m
CONFIG_RTC_DRV_R9701=m
CONFIG_RTC_DRV_RS5C348=m
CONFIG_RTC_DRV_DS3234=m
CONFIG_RTC_DRV_PCF2123=m

#
# Platform RTC drivers
#
CONFIG_RTC_DRV_CMOS=y
CONFIG_RTC_DRV_DS1286=m
CONFIG_RTC_DRV_DS1511=m
CONFIG_RTC_DRV_DS1553=m
CONFIG_RTC_DRV_DS1742=m
CONFIG_RTC_DRV_STK17TA8=m
CONFIG_RTC_DRV_M48T86=m
CONFIG_RTC_DRV_M48T35=m
CONFIG_RTC_DRV_M48T59=m
# CONFIG_RTC_DRV_MSM6242 is not set
CONFIG_RTC_DRV_BQ4802=m
# CONFIG_RTC_DRV_RP5C01 is not set
CONFIG_RTC_DRV_V3020=m
CONFIG_RTC_DRV_PCF50633=m

#
# on-CPU RTC drivers
#
# CONFIG_RTC_DRV_MC13783 is not set
CONFIG_DMADEVICES=y
# CONFIG_DMADEVICES_DEBUG is not set

#
# DMA Devices
#
CONFIG_ASYNC_TX_DISABLE_CHANNEL_SWITCH=y
CONFIG_INTEL_IOATDMA=m
# CONFIG_TIMB_DMA is not set
CONFIG_DMA_ENGINE=y

#
# DMA Clients
#
CONFIG_NET_DMA=y
CONFIG_ASYNC_TX_DMA=y
# CONFIG_DMATEST is not set
CONFIG_DCA=m
CONFIG_AUXDISPLAY=y
CONFIG_KS0108=m
CONFIG_KS0108_PORT=0x378
CONFIG_KS0108_DELAY=2
CONFIG_CFAG12864B=m
CONFIG_CFAG12864B_RATE=20
CONFIG_UIO=m
CONFIG_UIO_CIF=m
CONFIG_UIO_PDRV=m
CONFIG_UIO_PDRV_GENIRQ=m
CONFIG_UIO_AEC=m
CONFIG_UIO_SERCOS3=m
CONFIG_UIO_PCI_GENERIC=m
# CONFIG_UIO_NETX is not set
CONFIG_STAGING=y
# CONFIG_STAGING_EXCLUDE_BUILD is not set
CONFIG_ET131X=m
# CONFIG_ET131X_DEBUG is not set
CONFIG_SLICOSS=m
CONFIG_VIDEO_GO7007=m
CONFIG_VIDEO_GO7007_USB=m
CONFIG_VIDEO_GO7007_USB_S2250_BOARD=m
CONFIG_VIDEO_GO7007_OV7640=m
CONFIG_VIDEO_GO7007_SAA7113=m
CONFIG_VIDEO_GO7007_SAA7115=m
CONFIG_VIDEO_GO7007_TW9903=m
CONFIG_VIDEO_GO7007_UDA1342=m
CONFIG_VIDEO_GO7007_SONY_TUNER=m
CONFIG_VIDEO_GO7007_TW2804=m
CONFIG_VIDEO_CX25821=m
CONFIG_VIDEO_CX25821_ALSA=m
# CONFIG_VIDEO_TM6000 is not set
CONFIG_USB_IP_COMMON=m
CONFIG_USB_IP_VHCI_HCD=m
CONFIG_USB_IP_HOST=m
# CONFIG_USB_IP_DEBUG_ENABLE is not set
CONFIG_W35UND=m
CONFIG_PRISM2_USB=m
CONFIG_ECHO=m
# CONFIG_OTUS is not set
CONFIG_RT2860=m
CONFIG_RT2870=m
CONFIG_COMEDI=m
# CONFIG_COMEDI_DEBUG is not set
# CONFIG_COMEDI_MISC_DRIVERS is not set
# CONFIG_COMEDI_ISA_DRIVERS is not set
CONFIG_COMEDI_PCI_DRIVERS=m
# CONFIG_COMEDI_ADDI_APCI_035 is not set
# CONFIG_COMEDI_ADDI_APCI_1032 is not set
# CONFIG_COMEDI_ADDI_APCI_1500 is not set
# CONFIG_COMEDI_ADDI_APCI_1516 is not set
# CONFIG_COMEDI_ADDI_APCI_1564 is not set
# CONFIG_COMEDI_ADDI_APCI_16XX is not set
# CONFIG_COMEDI_ADDI_APCI_2016 is not set
# CONFIG_COMEDI_ADDI_APCI_2032 is not set
# CONFIG_COMEDI_ADDI_APCI_2200 is not set
# CONFIG_COMEDI_ADDI_APCI_3001 is not set
# CONFIG_COMEDI_ADDI_APCI_3120 is not set
# CONFIG_COMEDI_ADDI_APCI_3501 is not set
# CONFIG_COMEDI_ADDI_APCI_3XXX is not set
# CONFIG_COMEDI_ADL_PCI6208 is not set
# CONFIG_COMEDI_ADL_PCI7230 is not set
# CONFIG_COMEDI_ADL_PCI7296 is not set
# CONFIG_COMEDI_ADL_PCI7432 is not set
# CONFIG_COMEDI_ADL_PCI8164 is not set
# CONFIG_COMEDI_ADL_PCI9111 is not set
# CONFIG_COMEDI_ADL_PCI9118 is not set
# CONFIG_COMEDI_ADV_PCI1710 is not set
# CONFIG_COMEDI_ADV_PCI1723 is not set
# CONFIG_COMEDI_ADV_PCI_DIO is not set
# CONFIG_COMEDI_AMPLC_DIO200 is not set
# CONFIG_COMEDI_AMPLC_PC236 is not set
# CONFIG_COMEDI_AMPLC_PC263 is not set
# CONFIG_COMEDI_AMPLC_PCI224 is not set
# CONFIG_COMEDI_AMPLC_PCI230 is not set
# CONFIG_COMEDI_CONTEC_PCI_DIO is not set
# CONFIG_COMEDI_DT3000 is not set
# CONFIG_COMEDI_UNIOXX5 is not set
# CONFIG_COMEDI_GSC_HPDI is not set
# CONFIG_COMEDI_ICP_MULTI is not set
# CONFIG_COMEDI_II_PCI20KC is not set
# CONFIG_COMEDI_DAQBOARD2000 is not set
# CONFIG_COMEDI_JR3_PCI is not set
# CONFIG_COMEDI_KE_COUNTER is not set
# CONFIG_COMEDI_CB_PCIDAS64 is not set
# CONFIG_COMEDI_CB_PCIDAS is not set
# CONFIG_COMEDI_CB_PCIDDA is not set
# CONFIG_COMEDI_CB_PCIDIO is not set
# CONFIG_COMEDI_CB_PCIMDAS is not set
# CONFIG_COMEDI_CB_PCIMDDA is not set
# CONFIG_COMEDI_ME4000 is not set
# CONFIG_COMEDI_ME_DAQ is not set
# CONFIG_COMEDI_RTD520 is not set
# CONFIG_COMEDI_S526 is not set
# CONFIG_COMEDI_S626 is not set
# CONFIG_COMEDI_SSV_DNP is not set
CONFIG_COMEDI_PCMCIA_DRIVERS=m
# CONFIG_COMEDI_CB_DAS16_CS is not set
# CONFIG_COMEDI_DAS08_CS is not set
# CONFIG_COMEDI_QUATECH_DAQP_CS is not set
CONFIG_COMEDI_USB_DRIVERS=m
# CONFIG_COMEDI_DT9812 is not set
# CONFIG_COMEDI_USBDUX is not set
# CONFIG_COMEDI_USBDUXFAST is not set
# CONFIG_COMEDI_VMK80XX is not set
# CONFIG_COMEDI_NI_COMMON is not set
# CONFIG_COMEDI_8255 is not set
# CONFIG_COMEDI_DAS08 is not set
# CONFIG_COMEDI_FC is not set
CONFIG_ASUS_OLED=m
CONFIG_PANEL=m
CONFIG_PANEL_PARPORT=0
CONFIG_PANEL_PROFILE=5
# CONFIG_PANEL_CHANGE_MESSAGE is not set
# CONFIG_R8187SE is not set
CONFIG_RTL8192SU=m
# CONFIG_RTL8192U is not set
CONFIG_RTL8192E=m
CONFIG_TRANZPORT=m
CONFIG_POHMELFS=m
# CONFIG_POHMELFS_DEBUG is not set
CONFIG_POHMELFS_CRYPTO=y
CONFIG_IDE_PHISON=m
CONFIG_LINE6_USB=m
# CONFIG_DRM_VMWGFX is not set
CONFIG_DRM_NOUVEAU=m
CONFIG_DRM_NOUVEAU_BACKLIGHT=y
CONFIG_DRM_NOUVEAU_DEBUG=y

#
# I2C encoder or helper chips
#
CONFIG_DRM_I2C_CH7006=m
CONFIG_USB_SERIAL_QUATECH2=m
CONFIG_USB_SERIAL_QUATECH_USB2=m
# CONFIG_VT6655 is not set
CONFIG_VT6656=m
CONFIG_FB_UDL=m
CONFIG_HYPERV=m
CONFIG_HYPERV_STORAGE=m
CONFIG_HYPERV_BLOCK=m
CONFIG_HYPERV_NET=m
CONFIG_HYPERV_UTILS=m
CONFIG_VME_BUS=m

#
# VME Bridge Drivers
#
CONFIG_VME_CA91CX42=m
CONFIG_VME_TSI148=m

#
# VME Device Drivers
#
CONFIG_VME_USER=m

#
# VME Board Drivers
#
# CONFIG_VMIVME_7805 is not set

#
# RAR Register Driver
#
CONFIG_RAR_REGISTER=m
# CONFIG_MRST_RAR_HANDLER is not set
CONFIG_DX_SEP=m
CONFIG_IIO=m
CONFIG_IIO_RING_BUFFER=y
CONFIG_IIO_SW_RING=m
CONFIG_IIO_TRIGGER=y

#
# Accelerometers
#
# CONFIG_ADIS16209 is not set
# CONFIG_ADIS16220 is not set
# CONFIG_ADIS16240 is not set
CONFIG_KXSD9=m
CONFIG_LIS3L02DQ=m
# CONFIG_SCA3000 is not set

#
# Analog to digital convertors
#
CONFIG_MAX1363=m
CONFIG_MAX1363_RING_BUFFER=y

#
# Digital gyroscope sensors
#
# CONFIG_ADIS16260 is not set

#
# Inertial measurement units
#
# CONFIG_ADIS16300 is not set
# CONFIG_ADIS16350 is not set
# CONFIG_ADIS16400 is not set

#
# Light sensors
#
# CONFIG_SENSORS_TSL2563 is not set

#
# Triggers - standalone
#
# CONFIG_IIO_PERIODIC_RTC_TRIGGER is not set
# CONFIG_IIO_GPIO_TRIGGER is not set
# CONFIG_RAMZSWAP is not set
# CONFIG_WLAGS49_H2 is not set
# CONFIG_WLAGS49_H25 is not set
# CONFIG_BATMAN_ADV is not set
# CONFIG_SAMSUNG_LAPTOP is not set
# CONFIG_FB_SM7XX is not set
# CONFIG_DT3155 is not set
# CONFIG_VIDEO_DT3155 is not set
# CONFIG_CRYSTALHD is not set
# CONFIG_CXT1E1 is not set

#
# Texas Instruments shared transport line discipline
#
# CONFIG_TI_ST is not set
# CONFIG_ST_BT is not set
# CONFIG_ADIS16255 is not set
# CONFIG_FB_XGI is not set
CONFIG_X86_PLATFORM_DEVICES=y
CONFIG_ACER_WMI=m
CONFIG_ACERHDF=m
CONFIG_ASUS_LAPTOP=m
CONFIG_DELL_LAPTOP=m
CONFIG_DELL_WMI=m
CONFIG_FUJITSU_LAPTOP=m
# CONFIG_FUJITSU_LAPTOP_DEBUG is not set
CONFIG_TC1100_WMI=m
CONFIG_HP_WMI=m
CONFIG_MSI_LAPTOP=m
CONFIG_PANASONIC_LAPTOP=m
CONFIG_COMPAL_LAPTOP=m
CONFIG_SONY_LAPTOP=m
CONFIG_SONYPI_COMPAT=y
CONFIG_THINKPAD_ACPI=m
CONFIG_THINKPAD_ACPI_ALSA_SUPPORT=y
CONFIG_THINKPAD_ACPI_DEBUGFACILITIES=y
# CONFIG_THINKPAD_ACPI_DEBUG is not set
# CONFIG_THINKPAD_ACPI_UNSAFE_LEDS is not set
CONFIG_THINKPAD_ACPI_VIDEO=y
CONFIG_THINKPAD_ACPI_HOTKEY_POLL=y
CONFIG_EEEPC_LAPTOP=m
# CONFIG_EEEPC_WMI is not set
CONFIG_ACPI_WMI=y
# CONFIG_MSI_WMI is not set
# CONFIG_ACPI_ASUS is not set
CONFIG_TOPSTAR_LAPTOP=m
CONFIG_ACPI_TOSHIBA=m
# CONFIG_TOSHIBA_BT_RFKILL is not set
# CONFIG_ACPI_CMPC is not set

#
# Firmware Drivers
#
CONFIG_EDD=y
CONFIG_EDD_OFF=y
CONFIG_FIRMWARE_MEMMAP=y
CONFIG_EFI_VARS=y
CONFIG_DELL_RBU=m
CONFIG_DCDBAS=m
CONFIG_DMIID=y
CONFIG_ISCSI_IBFT_FIND=y
CONFIG_ISCSI_IBFT=m

#
# File systems
#
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
CONFIG_EXT3_DEFAULTS_TO_ORDERED=y
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
CONFIG_EXT4_FS=y
CONFIG_EXT4_FS_XATTR=y
CONFIG_EXT4_FS_POSIX_ACL=y
CONFIG_EXT4_FS_SECURITY=y
# CONFIG_EXT4_DEBUG is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_JBD2=y
# CONFIG_JBD2_DEBUG is not set
CONFIG_FS_MBCACHE=y
CONFIG_REISERFS_FS=m
# CONFIG_REISERFS_CHECK is not set
# CONFIG_REISERFS_PROC_INFO is not set
CONFIG_REISERFS_FS_XATTR=y
CONFIG_REISERFS_FS_POSIX_ACL=y
CONFIG_REISERFS_FS_SECURITY=y
CONFIG_JFS_FS=m
CONFIG_JFS_POSIX_ACL=y
CONFIG_JFS_SECURITY=y
# CONFIG_JFS_DEBUG is not set
CONFIG_JFS_STATISTICS=y
CONFIG_FS_POSIX_ACL=y
CONFIG_XFS_FS=m
CONFIG_XFS_QUOTA=y
CONFIG_XFS_POSIX_ACL=y
CONFIG_XFS_RT=y
# CONFIG_XFS_DEBUG is not set
CONFIG_GFS2_FS=m
CONFIG_GFS2_FS_LOCKING_DLM=y
CONFIG_OCFS2_FS=m
CONFIG_OCFS2_FS_O2CB=m
CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
CONFIG_OCFS2_FS_STATS=y
CONFIG_OCFS2_DEBUG_MASKLOG=y
# CONFIG_OCFS2_DEBUG_FS is not set
CONFIG_BTRFS_FS=m
CONFIG_BTRFS_FS_POSIX_ACL=y
CONFIG_NILFS2_FS=m
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_QUOTA=y
CONFIG_QUOTA_NETLINK_INTERFACE=y
# CONFIG_PRINT_QUOTA_WARNING is not set
# CONFIG_QUOTA_DEBUG is not set
CONFIG_QUOTA_TREE=m
CONFIG_QFMT_V1=m
CONFIG_QFMT_V2=m
CONFIG_QUOTACTL=y
CONFIG_AUTOFS_FS=m
CONFIG_AUTOFS4_FS=m
CONFIG_FUSE_FS=y
CONFIG_CUSE=m
CONFIG_GENERIC_ACL=y

#
# Caches
#
CONFIG_FSCACHE=m
# CONFIG_FSCACHE_STATS is not set
# CONFIG_FSCACHE_HISTOGRAM is not set
# CONFIG_FSCACHE_DEBUG is not set
# CONFIG_FSCACHE_OBJECT_LIST is not set
CONFIG_CACHEFILES=m
# CONFIG_CACHEFILES_DEBUG is not set
# CONFIG_CACHEFILES_HISTOGRAM is not set

#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_UDF_FS=m
CONFIG_UDF_NLS=y

#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
CONFIG_NTFS_FS=m
# CONFIG_NTFS_DEBUG is not set
# CONFIG_NTFS_RW is not set

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_VMCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_CONFIGFS_FS=m
CONFIG_MISC_FILESYSTEMS=y
CONFIG_ADFS_FS=m
# CONFIG_ADFS_FS_RW is not set
CONFIG_AFFS_FS=m
CONFIG_ECRYPT_FS=y
CONFIG_HFS_FS=m
CONFIG_HFSPLUS_FS=m
CONFIG_BEFS_FS=m
# CONFIG_BEFS_DEBUG is not set
CONFIG_BFS_FS=m
CONFIG_EFS_FS=m
CONFIG_JFFS2_FS=m
CONFIG_JFFS2_FS_DEBUG=0
CONFIG_JFFS2_FS_WRITEBUFFER=y
# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
# CONFIG_JFFS2_SUMMARY is not set
# CONFIG_JFFS2_FS_XATTR is not set
CONFIG_JFFS2_COMPRESSION_OPTIONS=y
CONFIG_JFFS2_ZLIB=y
CONFIG_JFFS2_LZO=y
CONFIG_JFFS2_RTIME=y
# CONFIG_JFFS2_RUBIN is not set
# CONFIG_JFFS2_CMODE_NONE is not set
# CONFIG_JFFS2_CMODE_PRIORITY is not set
# CONFIG_JFFS2_CMODE_SIZE is not set
CONFIG_JFFS2_CMODE_FAVOURLZO=y
CONFIG_UBIFS_FS=m
CONFIG_UBIFS_FS_XATTR=y
# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set
CONFIG_UBIFS_FS_LZO=y
CONFIG_UBIFS_FS_ZLIB=y
# CONFIG_UBIFS_FS_DEBUG is not set
# CONFIG_LOGFS is not set
CONFIG_CRAMFS=m
CONFIG_SQUASHFS=m
# CONFIG_SQUASHFS_XATTRS is not set
# CONFIG_SQUASHFS_EMBEDDED is not set
CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
CONFIG_VXFS_FS=m
CONFIG_MINIX_FS=m
CONFIG_OMFS_FS=m
CONFIG_HPFS_FS=m
CONFIG_QNX4FS_FS=m
CONFIG_ROMFS_FS=m
CONFIG_ROMFS_BACKED_BY_BLOCK=y
# CONFIG_ROMFS_BACKED_BY_MTD is not set
# CONFIG_ROMFS_BACKED_BY_BOTH is not set
CONFIG_ROMFS_ON_BLOCK=y
CONFIG_SYSV_FS=m
CONFIG_UFS_FS=m
# CONFIG_UFS_FS_WRITE is not set
# CONFIG_UFS_DEBUG is not set
CONFIG_EXOFS_FS=m
# CONFIG_EXOFS_DEBUG is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=y
# CONFIG_NFS_V4_1 is not set
# CONFIG_NFS_FSCACHE is not set
CONFIG_NFSD=m
CONFIG_NFSD_V2_ACL=y
CONFIG_NFSD_V3=y
CONFIG_NFSD_V3_ACL=y
CONFIG_NFSD_V4=y
CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
CONFIG_NFS_ACL_SUPPORT=m
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=m
CONFIG_SUNRPC_GSS=m
CONFIG_SUNRPC_XPRT_RDMA=m
CONFIG_RPCSEC_GSS_KRB5=m
CONFIG_RPCSEC_GSS_SPKM3=m
CONFIG_SMB_FS=m
# CONFIG_SMB_NLS_DEFAULT is not set
# CONFIG_CEPH_FS is not set
CONFIG_CIFS=m
# CONFIG_CIFS_STATS is not set
CONFIG_CIFS_WEAK_PW_HASH=y
CONFIG_CIFS_UPCALL=y
CONFIG_CIFS_XATTR=y
CONFIG_CIFS_POSIX=y
# CONFIG_CIFS_DEBUG2 is not set
CONFIG_CIFS_DFS_UPCALL=y
CONFIG_CIFS_EXPERIMENTAL=y
CONFIG_NCP_FS=m
CONFIG_NCPFS_PACKET_SIGNING=y
CONFIG_NCPFS_IOCTL_LOCKING=y
CONFIG_NCPFS_STRONG=y
CONFIG_NCPFS_NFS_NS=y
CONFIG_NCPFS_OS2_NS=y
# CONFIG_NCPFS_SMALLDOS is not set
CONFIG_NCPFS_NLS=y
CONFIG_NCPFS_EXTRAS=y
CONFIG_CODA_FS=m
CONFIG_AFS_FS=m
# CONFIG_AFS_DEBUG is not set
# CONFIG_AFS_FSCACHE is not set
CONFIG_9P_FS=m
# CONFIG_9P_FSCACHE is not set

#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
CONFIG_ACORN_PARTITION=y
# CONFIG_ACORN_PARTITION_CUMANA is not set
# CONFIG_ACORN_PARTITION_EESOX is not set
CONFIG_ACORN_PARTITION_ICS=y
# CONFIG_ACORN_PARTITION_ADFS is not set
# CONFIG_ACORN_PARTITION_POWERTEC is not set
CONFIG_ACORN_PARTITION_RISCIX=y
CONFIG_OSF_PARTITION=y
CONFIG_AMIGA_PARTITION=y
CONFIG_ATARI_PARTITION=y
CONFIG_MAC_PARTITION=y
CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
CONFIG_MINIX_SUBPARTITION=y
CONFIG_SOLARIS_X86_PARTITION=y
CONFIG_UNIXWARE_DISKLABEL=y
CONFIG_LDM_PARTITION=y
# CONFIG_LDM_DEBUG is not set
CONFIG_SGI_PARTITION=y
CONFIG_ULTRIX_PARTITION=y
CONFIG_SUN_PARTITION=y
CONFIG_KARMA_PARTITION=y
CONFIG_EFI_PARTITION=y
CONFIG_SYSV68_PARTITION=y
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="cp437"
CONFIG_NLS_CODEPAGE_437=m
CONFIG_NLS_CODEPAGE_737=m
CONFIG_NLS_CODEPAGE_775=m
CONFIG_NLS_CODEPAGE_850=m
CONFIG_NLS_CODEPAGE_852=m
CONFIG_NLS_CODEPAGE_855=m
CONFIG_NLS_CODEPAGE_857=m
CONFIG_NLS_CODEPAGE_860=m
CONFIG_NLS_CODEPAGE_861=m
CONFIG_NLS_CODEPAGE_862=m
CONFIG_NLS_CODEPAGE_863=m
CONFIG_NLS_CODEPAGE_864=m
CONFIG_NLS_CODEPAGE_865=m
CONFIG_NLS_CODEPAGE_866=m
CONFIG_NLS_CODEPAGE_869=m
CONFIG_NLS_CODEPAGE_936=m
CONFIG_NLS_CODEPAGE_950=m
CONFIG_NLS_CODEPAGE_932=m
CONFIG_NLS_CODEPAGE_949=m
CONFIG_NLS_CODEPAGE_874=m
CONFIG_NLS_ISO8859_8=m
CONFIG_NLS_CODEPAGE_1250=m
CONFIG_NLS_CODEPAGE_1251=m
CONFIG_NLS_ASCII=m
CONFIG_NLS_ISO8859_1=m
CONFIG_NLS_ISO8859_2=m
CONFIG_NLS_ISO8859_3=m
CONFIG_NLS_ISO8859_4=m
CONFIG_NLS_ISO8859_5=m
CONFIG_NLS_ISO8859_6=m
CONFIG_NLS_ISO8859_7=m
CONFIG_NLS_ISO8859_9=m
CONFIG_NLS_ISO8859_13=m
CONFIG_NLS_ISO8859_14=m
CONFIG_NLS_ISO8859_15=m
CONFIG_NLS_KOI8_R=m
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_UTF8=m
CONFIG_DLM=m
# CONFIG_DLM_DEBUG is not set

#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_PRINTK_TIME=y
# CONFIG_ENABLE_WARN_DEPRECATED is not set
# CONFIG_ENABLE_MUST_CHECK is not set
CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_UNUSED_SYMBOLS=y
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
CONFIG_IPIPE_DEBUG=y
CONFIG_IPIPE_DEBUG_CONTEXT=y
CONFIG_IPIPE_DEBUG_INTERNAL=y
CONFIG_IPIPE_TRACE=y
# CONFIG_IPIPE_TRACE_ENABLE is not set
CONFIG_IPIPE_TRACE_MCOUNT=y
CONFIG_IPIPE_TRACE_IRQSOFF=y
CONFIG_IPIPE_TRACE_SHIFT=15
# CONFIG_IPIPE_TRACE_VMALLOC is not set
CONFIG_IPIPE_TRACE_PANIC=y
# CONFIG_DEBUG_KERNEL is not set
CONFIG_SCHED_DEBUG=y
CONFIG_SCHEDSTATS=y
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
CONFIG_STACKTRACE=y
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_MEMORY_INIT=y
CONFIG_ARCH_WANT_FRAME_POINTERS=y
CONFIG_FRAME_POINTER=y
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_LKDTM is not set
CONFIG_LATENCYTOP=y
CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_USER_STACKTRACE_SUPPORT=y
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FTRACE_NMI_ENTER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_FP_TEST=y
CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_RING_BUFFER=y
CONFIG_FTRACE_NMI_ENTER=y
CONFIG_EVENT_TRACING=y
CONFIG_CONTEXT_SWITCH_TRACER=y
CONFIG_RING_BUFFER_ALLOW_SWAP=y
CONFIG_TRACING=y
CONFIG_GENERIC_TRACER=y
CONFIG_TRACING_SUPPORT=y
CONFIG_FTRACE=y
CONFIG_FUNCTION_TRACER=y
CONFIG_FUNCTION_GRAPH_TRACER=y
# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_SYSPROF_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_FTRACE_SYSCALLS is not set
# CONFIG_BOOT_TRACER is not set
CONFIG_BRANCH_PROFILE_NONE=y
# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
# CONFIG_PROFILE_ALL_BRANCHES is not set
# CONFIG_KSYM_TRACER is not set
# CONFIG_STACK_TRACER is not set
# CONFIG_KMEMTRACE is not set
# CONFIG_WORKQUEUE_TRACER is not set
CONFIG_BLK_DEV_IO_TRACE=y
CONFIG_KPROBE_EVENT=y
CONFIG_DYNAMIC_FTRACE=y
# CONFIG_FUNCTION_PROFILER is not set
CONFIG_FTRACE_MCOUNT_RECORD=y
# CONFIG_FTRACE_STARTUP_TEST is not set
CONFIG_MMIOTRACE=y
# CONFIG_MMIOTRACE_TEST is not set
# CONFIG_RING_BUFFER_BENCHMARK is not set
# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set
# CONFIG_FIREWIRE_OHCI_REMOTE_DMA is not set
# CONFIG_DYNAMIC_DEBUG is not set
# CONFIG_DMA_API_DEBUG is not set
# CONFIG_ATOMIC64_SELFTEST is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_HAVE_ARCH_KMEMCHECK=y
CONFIG_STRICT_DEVMEM=y
# CONFIG_X86_VERBOSE_BOOTUP is not set
CONFIG_EARLY_PRINTK=y
# CONFIG_EARLY_PRINTK_DBGP is not set
# CONFIG_4KSTACKS is not set
CONFIG_DOUBLEFAULT=y
# CONFIG_IOMMU_STRESS is not set
CONFIG_HAVE_MMIOTRACE_SUPPORT=y
CONFIG_IO_DELAY_TYPE_0X80=0
CONFIG_IO_DELAY_TYPE_0XED=1
CONFIG_IO_DELAY_TYPE_UDELAY=2
CONFIG_IO_DELAY_TYPE_NONE=3
# CONFIG_IO_DELAY_0X80 is not set
CONFIG_IO_DELAY_0XED=y
# CONFIG_IO_DELAY_UDELAY is not set
# CONFIG_IO_DELAY_NONE is not set
CONFIG_DEFAULT_IO_DELAY_TYPE=1
CONFIG_OPTIMIZE_INLINING=y

#
# Security options
#
CONFIG_KEYS=y
# CONFIG_KEYS_DEBUG_PROC_KEYS is not set
CONFIG_SECURITY=y
CONFIG_SECURITYFS=y
CONFIG_SECURITY_NETWORK=y
# CONFIG_SECURITY_NETWORK_XFRM is not set
CONFIG_SECURITY_PATH=y
CONFIG_LSM_MMAP_MIN_ADDR=0
CONFIG_SECURITY_SELINUX=y
CONFIG_SECURITY_SELINUX_BOOTPARAM=y
CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=0
CONFIG_SECURITY_SELINUX_DISABLE=y
CONFIG_SECURITY_SELINUX_DEVELOP=y
CONFIG_SECURITY_SELINUX_AVC_STATS=y
CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1
# CONFIG_SECURITY_SELINUX_POLICYDB_VERSION_MAX is not set
CONFIG_SECURITY_SMACK=y
CONFIG_SECURITY_TOMOYO=y
# CONFIG_IMA is not set
CONFIG_DEFAULT_SECURITY_SELINUX=y
# CONFIG_DEFAULT_SECURITY_SMACK is not set
# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
# CONFIG_DEFAULT_SECURITY_DAC is not set
CONFIG_DEFAULT_SECURITY="selinux"
CONFIG_XOR_BLOCKS=m
CONFIG_ASYNC_CORE=m
CONFIG_ASYNC_MEMCPY=m
CONFIG_ASYNC_XOR=m
CONFIG_ASYNC_PQ=m
CONFIG_ASYNC_RAID6_RECOV=m
CONFIG_ASYNC_TX_DISABLE_PQ_VAL_DMA=y
CONFIG_ASYNC_TX_DISABLE_XOR_VAL_DMA=y
CONFIG_CRYPTO=y

#
# Crypto core or helper
#
CONFIG_CRYPTO_FIPS=y
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=m
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=m
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
CONFIG_CRYPTO_MANAGER_TESTS=y
CONFIG_CRYPTO_GF128MUL=m
CONFIG_CRYPTO_NULL=m
CONFIG_CRYPTO_WORKQUEUE=y
CONFIG_CRYPTO_CRYPTD=m
CONFIG_CRYPTO_AUTHENC=m
CONFIG_CRYPTO_TEST=m

#
# Authenticated Encryption with Associated Data
#
CONFIG_CRYPTO_CCM=m
CONFIG_CRYPTO_GCM=m
CONFIG_CRYPTO_SEQIV=m

#
# Block modes
#
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_CTR=m
CONFIG_CRYPTO_CTS=m
CONFIG_CRYPTO_ECB=y
CONFIG_CRYPTO_LRW=m
CONFIG_CRYPTO_PCBC=m
CONFIG_CRYPTO_XTS=m

#
# Hash modes
#
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_XCBC=m
CONFIG_CRYPTO_VMAC=m

#
# Digest
#
CONFIG_CRYPTO_CRC32C=m
CONFIG_CRYPTO_CRC32C_INTEL=m
CONFIG_CRYPTO_GHASH=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_RMD128=m
CONFIG_CRYPTO_RMD160=m
CONFIG_CRYPTO_RMD256=m
CONFIG_CRYPTO_RMD320=m
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_TGR192=m
CONFIG_CRYPTO_WP512=m

#
# Ciphers
#
CONFIG_CRYPTO_AES=m
CONFIG_CRYPTO_AES_586=m
CONFIG_CRYPTO_ANUBIS=m
CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_CAMELLIA=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_DES=m
CONFIG_CRYPTO_FCRYPT=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_SALSA20=m
CONFIG_CRYPTO_SALSA20_586=m
CONFIG_CRYPTO_SEED=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_TWOFISH_COMMON=m
CONFIG_CRYPTO_TWOFISH_586=m

#
# Compression
#
CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_ZLIB=m
CONFIG_CRYPTO_LZO=m

#
# Random Number Generation
#
CONFIG_CRYPTO_ANSI_CPRNG=m
CONFIG_CRYPTO_HW=y
CONFIG_CRYPTO_DEV_PADLOCK=y
CONFIG_CRYPTO_DEV_PADLOCK_AES=m
CONFIG_CRYPTO_DEV_PADLOCK_SHA=m
CONFIG_CRYPTO_DEV_GEODE=m
CONFIG_CRYPTO_DEV_HIFN_795X=m
CONFIG_CRYPTO_DEV_HIFN_795X_RNG=y
CONFIG_HAVE_KVM=y
CONFIG_HAVE_KVM_IRQCHIP=y
CONFIG_HAVE_KVM_EVENTFD=y
CONFIG_KVM_APIC_ARCHITECTURE=y
CONFIG_KVM_MMIO=y
CONFIG_VIRTUALIZATION=y
CONFIG_KVM=m
CONFIG_KVM_INTEL=m
CONFIG_KVM_AMD=m
# CONFIG_VHOST_NET is not set
# CONFIG_LGUEST is not set
CONFIG_VIRTIO=m
CONFIG_VIRTIO_RING=m
CONFIG_VIRTIO_PCI=m
CONFIG_VIRTIO_BALLOON=m
CONFIG_BINARY_PRINTF=y

#
# Library routines
#
CONFIG_BITREVERSE=y
CONFIG_GENERIC_FIND_FIRST_BIT=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_FIND_LAST_BIT=y
CONFIG_CRC_CCITT=m
CONFIG_CRC16=y
CONFIG_CRC_T10DIF=y
CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
CONFIG_CRC7=m
CONFIG_LIBCRC32C=m
CONFIG_AUDIT_GENERIC=y
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=m
CONFIG_LZO_COMPRESS=m
CONFIG_LZO_DECOMPRESS=y
CONFIG_DECOMPRESS_GZIP=y
CONFIG_DECOMPRESS_BZIP2=y
CONFIG_DECOMPRESS_LZMA=y
CONFIG_DECOMPRESS_LZO=y
CONFIG_GENERIC_ALLOCATOR=y
CONFIG_REED_SOLOMON=m
CONFIG_REED_SOLOMON_DEC16=y
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=m
CONFIG_TEXTSEARCH_BM=m
CONFIG_TEXTSEARCH_FSM=m
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_CHECK_SIGNATURE=y
CONFIG_NLATTR=y

[Xenomai-help] Problems with rt_task_create and rt_task_join

[Michel Rinaldi]

[-- Attachment #1: Type: text/plain, Size: 1209 bytes --]

Hi to all, 

I'm running an application on a Linux system with kernel 2.6.35.7 patched with Xenomai 2.5.5.2, Adeos ipipe patch 2.7-04. 
My application uses native skin and creates some realtime tasks, each with rt_task_shadow(), each other with rt_task_create(). When I call for first time rt_task_create(), this function is very slow (700-800 ms) to execute, also if rt_task_shadow() calls come first. Subsequent calls of rt_task_create() are quick as expected. I read on manual that at first call rt_task_create() creates a signal handler for SIGWINCH signal: could be this operation that wastes time, maybe on waiting some resources from Linx kernel? 
Another problem that I've encountered is that if I call a rt_int_delete() and then a rt_task_join() on userspace task that handles destroyed IRQ, rt_task_join() never returns (obviously this task was created with joinable flag). If I create this task without joinable flag and then I call rt_task_delete() instead rt_task_join() I obtain two different behaviours: sometimes rt_task_delete() returns but I still view task on /proc/xenomai/sched (with X status), sometimes system freezes on this call. 
Thanks to all in advance. 
Regards 

Mauro Salvini 


[-- Attachment #2: Type: text/html, Size: 1406 bytes --]

Re: [Xenomai-help] Problems with rt_task_create and rt_task_join

[Philippe Gerum]

On Fri, 2011-01-21 at 18:01 +0100, Michel Rinaldi wrote:
> Hi to all,
> 
> I'm running an application on a Linux system with kernel 2.6.35.7
> patched with Xenomai 2.5.5.2, Adeos ipipe patch 2.7-04.
> My application uses native skin and creates some realtime tasks, each
> with rt_task_shadow(), each other with rt_task_create().

Sorry, -ENOPARSE. rt_task_shadow() is usually invoked from the main
thread to make it a Xenomai thread, rt_task_create is normally used to
create more tasks. Who is doing what in your code exactly? How many
times is rt_task_shadow() invoked?

>  When I call for first time rt_task_create(), this function is very
> slow (700-800 ms) to execute, also if rt_task_shadow() calls come
> first. Subsequent calls of rt_task_create() are quick as expected. I
> read on manual that at first call rt_task_create() creates a signal
> handler for SIGWINCH signal: could be this operation that wastes time,
> maybe on waiting some resources from Linx kernel? 

No, can't be that long. Something looks wrong in your application init.

> Another problem that I've encountered is that if I call a
> rt_int_delete() and then a rt_task_join() on userspace task that
> handles destroyed IRQ,  rt_task_join() never returns (obviously this
> task was created with joinable flag). If I create this task without
> joinable flag and then I call rt_task_delete() instead rt_task_join()
> I obtain two different behaviours: sometimes rt_task_delete() returns
> but I still view task on /proc/xenomai/sched (with X status),
> sometimes system freezes on this call.

Make sure to test the return values of ALL Xenomai syscalls in your app,
particularly what rt_intr_wait() sends you back, and make sure to break
out from your work loop whenever it signals any error.

> Thanks to all in advance.
> Regards
> 
> Mauro Salvini
> 
> 
> _______________________________________________
> Xenomai-help mailing list
> Xenomai-help@domain.hid
> https://mail.gna.org/listinfo/xenomai-help

-- 
Philippe.

Re: [Xenomai-help] Problems with rt_task_create and rt_task_join

[Mauro]

[-- Attachment #1: Type: text/plain, Size: 2818 bytes --]

2011/1/21 Philippe Gerum <rpm@xenomai.org>

> On Fri, 2011-01-21 at 18:01 +0100, Michel Rinaldi wrote:
> > Hi to all,
> >
> > I'm running an application on a Linux system with kernel 2.6.35.7
> > patched with Xenomai 2.5.5.2, Adeos ipipe patch 2.7-04.
> > My application uses native skin and creates some realtime tasks, each
> > with rt_task_shadow(), each other with rt_task_create().
>
> Sorry, -ENOPARSE. rt_task_shadow() is usually invoked from the main
> thread to make it a Xenomai thread, rt_task_create is normally used to
> create more tasks. Who is doing what in your code exactly? How many
> times is rt_task_shadow() invoked?
>

I apologize for "tar.gzipped" :-) explanation.
I have one main thread that calls rt_task_shadow() to become a real-time
task.
This task creates a pthread that makes itself a real-time thread with
rt_task_shadow() call.
Then, latter task creates a new real-time task with rt_task_create().
First rt_task_create() call spends more time, next calls are immediate ( <
1millisecond ).


> >  When I call for first time rt_task_create(), this function is very
> > slow (700-800 ms) to execute, also if rt_task_shadow() calls come
> > first. Subsequent calls of rt_task_create() are quick as expected. I
> > read on manual that at first call rt_task_create() creates a signal
> > handler for SIGWINCH signal: could be this operation that wastes time,
> > maybe on waiting some resources from Linx kernel?
>
> No, can't be that long. Something looks wrong in your application init.
>

I'll do additional checks on my code monday.


>
> > Another problem that I've encountered is that if I call a
> > rt_int_delete() and then a rt_task_join() on userspace task that
> > handles destroyed IRQ,  rt_task_join() never returns (obviously this
> > task was created with joinable flag). If I create this task without
> > joinable flag and then I call rt_task_delete() instead rt_task_join()
> > I obtain two different behaviours: sometimes rt_task_delete() returns
> > but I still view task on /proc/xenomai/sched (with X status),
> > sometimes system freezes on this call.
>
> Make sure to test the return values of ALL Xenomai syscalls in your app,
> particularly what rt_intr_wait() sends you back, and make sure to break
> out from your work loop whenever it signals any error.
>

I'll also add additional checks on all Xenomai calls.
Thank you very much.
Regards
Mauro Salvini


>
> > Thanks to all in advance.
> > Regards
> >
> > Mauro Salvini
> >
> >
> > _______________________________________________
> > Xenomai-help mailing list
> > Xenomai-help@domain.hid
> > https://mail.gna.org/listinfo/xenomai-help
>
> --
> Philippe.
>
>
>
> _______________________________________________
> Xenomai-help mailing list
> Xenomai-help@domain.hid
> https://mail.gna.org/listinfo/xenomai-help
>

[-- Attachment #2: Type: text/html, Size: 4332 bytes --]

Re: [Xenomai-help] Problems with rt_task_create and rt_task_join

[Gilles Chanteperdrix]

Michel Rinaldi wrote:
> Hi to all,
> 
> I'm running an application on a Linux system with kernel 2.6.35.7
> patched with Xenomai 2.5.5.2, Adeos ipipe patch 2.7-04. My
> application uses native skin and creates some realtime tasks, each
> with rt_task_shadow(), each other with rt_task_create(). When I call
> for first time rt_task_create(), this function is very slow (700-800
> ms)

A reason for the service being so slow the first time it is called may
be the on-demand libraries loading. But for this to take a long time,
the native skin library would have to be stored on a really slow storage
device, or compressed and the processor you are using being a really
slow one. Anyway, you do not tell us on what architecture you get this
issue? What processor are you using? Where is the library stored?

-- 
                                                                Gilles.

Re: [Xenomai-help] Problems with rt_task_create and rt_task_join

[Michel Rinaldi]

[-- Attachment #1: Type: text/plain, Size: 3567 bytes --]


> A reason for the service being so slow the first time it is called may 
> be the on-demand libraries loading. But for this to take a long time, 
> the native skin library would have to be stored on a really slow storage 
> device, or compressed and the processor you are using being a really 
> slow one. Anyway, you do not tell us on what architecture you get this 
> issue? What processor are you using? Where is the library stored? 
> 
> -- 
> Gilles. 

Hi to all, and thank you for your support. 

First of all, I'm running Xenomai on an Intel Celeron M 600MHz CPU with 512 MB RAM. 
This embedded PC has its storage unit onto a 2GB compact flash, connected to motherboard via ATA interface. 
Xenomai libraries are into default /usr/xenomai path, and seems not compressed. 
Linux distro is Ubuntu 10.04. Attached to this message there's my vanilla kernel configuration. 

I tried to check all Xenomai calls, they return no errors. 
rt_intr_wait() call returns -EIDRM only when interrupt object was deleted, no errors otherwise. 

I checked /proc/<pid>/maps to see if libraries are loaded correctly, and all seems to be OK. 

To deeply explain my software, some Xenomai syscalls are done into shared objects thata are loaded dinamically at runtime with dlopen()-dlclose() calls. Particularly, I launch my application, and at a certain time I dinamically load into my app an external piece of software contained into a shared object. 
This piece of software creates a rt task with rt_task_shadow() and contains a function that creates an IRQ handler: to do this, latter function calls rt_intr_create(), rt_task_create() and rt_task_start(). 
Next, I attach to my app another shared object that also creates a rt task with rt_task_shadow(). 
Then, if I call my function that creates IRQ handler into first loaded object (where function to create IRQ was contained), execution time is quick. 
Instead, if I call this function from latter shared object loaded, execution was horribly long (at least 500ms). 
These behaviours are independent from the fact that it is or not the first rt_task_create() into application. 
Could be this an issue related to dynamic loading? 

Another strange behaviour that I observed is that if I create IRQ handling thread not as joinable, if my call sequence is: 

rt_intr_delete(&myIntrHandler); 
rt_task_delete(&myIntrTask); 

I still see task into /proc/xenomai/sched (with X state), and rt_printf() strings subsequent to rt_task_delete() that are into same function don't appear. 
It seems to be that rt_task_delete() call destroys calling task instead target task. 

Instead, If sequence call is: 

rt_intr_delete(&myIntrHandler); 
rt_task_sleep(1000000000); 
rt_task_delete(&myIntrTask); 

I don't see at all task into /proc/xenomai/sched, and rt_printf() strings subsequent to rt_task_delete() was printed normally. 
Note that these calls are done when an object was dinamically unloaded with dlclose(). 

One more question, on rt_task_join(): manual says that the joined task must have been created by the same process that wants to join it: into this assertion, process means "a task" (then, a PID) or "a process composed by tasks"? I think the former. 
And if the process that calls rt_task_join() is not the same, could this cause the function doesn't returns? 

Finally, if this can help, I also observed these messages into dmesg: 
Clocksource tsc unstable (delta = 2636104979 ns) 
Switching to clocksource pit 
They appears when rt_task_create() is slow. 

Thank you in advance for your precious help. 
Regards 
Mauro 


[-- Attachment #2: Type: text/html, Size: 4150 bytes --]

Re: [Xenomai-help] Problems with rt_task_create and rt_task_join

[Gilles Chanteperdrix]

Michel Rinaldi wrote:
>> A reason for the service being so slow the first time it is called
>> may be the on-demand libraries loading. But for this to take a long
>> time, the native skin library would have to be stored on a really
>> slow storage device, or compressed and the processor you are using
>> being a really slow one. Anyway, you do not tell us on what
>> architecture you get this issue? What processor are you using?
>> Where is the library stored?
>> 
>> -- Gilles.
> 
> Hi to all, and thank you for your support.
> 
> First of all, I'm running Xenomai on an Intel Celeron M 600MHz CPU
> with 512 MB RAM. This embedded PC has its storage unit onto a 2GB
> compact flash, connected to motherboard via ATA interface. Xenomai
> libraries are into default /usr/xenomai path, and seems not
> compressed. Linux distro is Ubuntu 10.04. Attached to this message
> there's my vanilla kernel configuration.
> 
> I tried to check all Xenomai calls, they return no errors. 
> rt_intr_wait() call returns -EIDRM only when interrupt object was
> deleted, no errors otherwise.
> 
> I checked /proc/<pid>/maps to see if libraries are loaded correctly,
> and all seems to be OK.
> 
> To deeply explain my software, some Xenomai syscalls are done into
> shared objects thata are loaded dinamically at runtime with
> dlopen()-dlclose() calls. Particularly, I launch my application, and
> at a certain time I dinamically load into my app an external piece of
> software contained into a shared object. This piece of software
> creates a rt task with rt_task_shadow() and contains a function that
> creates an IRQ handler: to do this, latter function calls
> rt_intr_create(), rt_task_create() and rt_task_start(). Next, I
> attach to my app another shared object that also creates a rt task
> with rt_task_shadow(). Then, if I call my function that creates IRQ
> handler into first loaded object (where function to create IRQ was
> contained), execution time is quick. Instead, if I call this function
> from latter shared object loaded, execution was horribly long (at
> least 500ms). These behaviours are independent from the fact that it
> is or not the first rt_task_create() into application. Could be this
> an issue related to dynamic loading?
> 
> Another strange behaviour that I observed is that if I create IRQ
> handling thread not as joinable, if my call sequence is:
> 
> rt_intr_delete(&myIntrHandler); rt_task_delete(&myIntrTask);
> 
> I still see task into /proc/xenomai/sched (with X state), and
> rt_printf() strings subsequent to rt_task_delete() that are into same
> function don't appear. It seems to be that rt_task_delete() call
> destroys calling task instead target task.
> 
> Instead, If sequence call is:
> 
> rt_intr_delete(&myIntrHandler); rt_task_sleep(1000000000); 
> rt_task_delete(&myIntrTask);
> 
> I don't see at all task into /proc/xenomai/sched, and rt_printf()
> strings subsequent to rt_task_delete() was printed normally. Note
> that these calls are done when an object was dinamically unloaded
> with dlclose().


You explanations are hard to follow and understand, and what is more,
ambiguous. Send us a piece of code which allows us to reproduce this
issue. Trying to make it as simple as possible. For instance seeing if
registering the interrupt causes any difference (if it does not make any
difference, then remove it, you get the idea).

As usual, we do not know what version of Xenomai, Adeos, Linux, etc...
you are using. See:
http://www.xenomai.org/index.php/Request_for_information

> 
> One more question, on rt_task_join(): manual says that the joined
> task must have been created by the same process that wants to join
> it: into this assertion, process means "a task" (then, a PID) or "a
> process composed by tasks"? I think the former. And if the process
> that calls rt_task_join() is not the same, could this cause the
> function doesn't returns?

process means process. process has a very precise meaning in the context
of posix operating systems, we mean exactly that. Talking about PID is
ambiguous, because unfortunately, with past versions of the glibc,
different threads belonging to the same process had different PIDs. A
task is a thread.

> 
> Finally, if this can help, I also observed these messages into dmesg:
>  Clocksource tsc unstable (delta = 2636104979 ns) Switching to
> clocksource pit They appears when rt_task_create() is slow.

That is bad. One more question: what happens when you run the "latency"
test, do you get strange results? Also, I see that you have the SMI
workaround enabled, does it detect your chipset?

-- 
                                                                Gilles.