* chromium browser
@ 2011-02-07 4:52 yogesh lal
2011-02-07 12:15 ` Gary Thomas
0 siblings, 1 reply; 14+ messages in thread
From: yogesh lal @ 2011-02-07 4:52 UTC (permalink / raw)
To: poky
[-- Attachment #1: Type: text/plain, Size: 131 bytes --]
Hi,
I am new to poky, so don't know it will make any sense or not, but can we
build chromium browser using Poky ?
Thanks
[-- Attachment #2: Type: text/html, Size: 149 bytes --]
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: chromium browser
2011-02-07 4:52 chromium browser yogesh lal
@ 2011-02-07 12:15 ` Gary Thomas
2011-02-07 12:51 ` embedded.yogesh
0 siblings, 1 reply; 14+ messages in thread
From: Gary Thomas @ 2011-02-07 12:15 UTC (permalink / raw)
To: yogesh lal; +Cc: poky
On 02/06/2011 09:52 PM, yogesh lal wrote:
> Hi,
>
> I am new to poky, so don't know it will make any sense or not, but can we build chromium browser using Poky ?
What's your target architecture? Last I checked, only x86 and ARM
are supported.
It can be done, but it's certainly not for the faint of heart :-)
--
------------------------------------------------------------
Gary Thomas | Consulting for the
MLB Associates | Embedded world
------------------------------------------------------------
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: chromium browser
2011-02-07 12:15 ` Gary Thomas
@ 2011-02-07 12:51 ` embedded.yogesh
2011-02-07 18:23 ` Darren Hart
0 siblings, 1 reply; 14+ messages in thread
From: embedded.yogesh @ 2011-02-07 12:51 UTC (permalink / raw)
To: poky
On Monday 07 February 2011 05:45 PM, Gary Thomas wrote:
> On 02/06/2011 09:52 PM, yogesh lal wrote:
>> Hi,
>>
>> I am new to poky, so don't know it will make any sense or not, but
>> can we build chromium browser using Poky ?
>
> What's your target architecture? Last I checked, only x86 and ARM
> are supported.
>
> It can be done, but it's certainly not for the faint of heart :-)
>
I am working on X86 platform. Can you give some initial start up where I
have to look ?
Thanks :)
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: chromium browser
2011-02-07 12:51 ` embedded.yogesh
@ 2011-02-07 18:23 ` Darren Hart
2011-02-07 18:35 ` Gary Thomas
0 siblings, 1 reply; 14+ messages in thread
From: Darren Hart @ 2011-02-07 18:23 UTC (permalink / raw)
To: embedded.yogesh; +Cc: poky
On 02/07/2011 04:51 AM, embedded.yogesh wrote:
> On Monday 07 February 2011 05:45 PM, Gary Thomas wrote:
>> On 02/06/2011 09:52 PM, yogesh lal wrote:
>>> Hi,
>>>
>>> I am new to poky, so don't know it will make any sense or not, but
>>> can we build chromium browser using Poky ?
>>
>> What's your target architecture? Last I checked, only x86 and ARM
>> are supported.
>>
>> It can be done, but it's certainly not for the faint of heart :-)
>>
>
> I am working on X86 platform. Can you give some initial start up where I
> have to look ?
Find and download the Chromium source, then have a look at the Poky
Reference Guide for how to create an appropriate recipe, using recipes
for projects with similar source layouts as examples.
http://www.yoctoproject.org/docs/poky-ref-manual/poky-ref-manual.html
--
Darren Hart
Intel Open Source Technology Center
Yocto Project - Linux Kernel
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: chromium browser
2011-02-07 18:23 ` Darren Hart
@ 2011-02-07 18:35 ` Gary Thomas
2011-02-08 4:02 ` embedded.yogesh
0 siblings, 1 reply; 14+ messages in thread
From: Gary Thomas @ 2011-02-07 18:35 UTC (permalink / raw)
To: Darren Hart; +Cc: poky
On 02/07/2011 11:23 AM, Darren Hart wrote:
> On 02/07/2011 04:51 AM, embedded.yogesh wrote:
>> On Monday 07 February 2011 05:45 PM, Gary Thomas wrote:
>>> On 02/06/2011 09:52 PM, yogesh lal wrote:
>>>> Hi,
>>>>
>>>> I am new to poky, so don't know it will make any sense or not, but
>>>> can we build chromium browser using Poky ?
>>>
>>> What's your target architecture? Last I checked, only x86 and ARM
>>> are supported.
>>>
>>> It can be done, but it's certainly not for the faint of heart :-)
>>>
>>
>> I am working on X86 platform. Can you give some initial start up where I
>> have to look ?
>
> Find and download the Chromium source, then have a look at the Poky Reference Guide for how to create an appropriate recipe, using recipes for projects with similar source layouts
> as examples.
>
> http://www.yoctoproject.org/docs/poky-ref-manual/poky-ref-manual.html
Probably a lot easier to start with the OpenEmbedded recipe
since it already works. The biggest problem is that there
are a ton of dependencies, so you'll need to bring in those
recipes as well.
--
------------------------------------------------------------
Gary Thomas | Consulting for the
MLB Associates | Embedded world
------------------------------------------------------------
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: chromium browser
2011-02-07 18:35 ` Gary Thomas
@ 2011-02-08 4:02 ` embedded.yogesh
2011-02-21 5:33 ` embedded.yogesh
0 siblings, 1 reply; 14+ messages in thread
From: embedded.yogesh @ 2011-02-08 4:02 UTC (permalink / raw)
To: poky
On Tuesday 08 February 2011 12:05 AM, Gary Thomas wrote:
> On 02/07/2011 11:23 AM, Darren Hart wrote:
>> On 02/07/2011 04:51 AM, embedded.yogesh wrote:
>>> On Monday 07 February 2011 05:45 PM, Gary Thomas wrote:
>>>> On 02/06/2011 09:52 PM, yogesh lal wrote:
>>>>> Hi,
>>>>>
>>>>> I am new to poky, so don't know it will make any sense or not, but
>>>>> can we build chromium browser using Poky ?
>>>>
>>>> What's your target architecture? Last I checked, only x86 and ARM
>>>> are supported.
>>>>
>>>> It can be done, but it's certainly not for the faint of heart :-)
>>>>
>>>
>>> I am working on X86 platform. Can you give some initial start up
>>> where I
>>> have to look ?
>>
>> Find and download the Chromium source, then have a look at the Poky
>> Reference Guide for how to create an appropriate recipe, using
>> recipes for projects with similar source layouts
>> as examples.
>>
>> http://www.yoctoproject.org/docs/poky-ref-manual/poky-ref-manual.html
>
> Probably a lot easier to start with the OpenEmbedded recipe
> since it already works. The biggest problem is that there
> are a ton of dependencies, so you'll need to bring in those
> recipes as well.
>
Thanks Gary Thomas and Darren Hart ,
I am look in to poky-ref-manual and OpenEmbedded recipes :)
---
Yogesh
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: chromium browser
2011-02-08 4:02 ` embedded.yogesh
@ 2011-02-21 5:33 ` embedded.yogesh
2011-02-22 11:13 ` Richard Purdie
0 siblings, 1 reply; 14+ messages in thread
From: embedded.yogesh @ 2011-02-21 5:33 UTC (permalink / raw)
To: poky
Hi,
I tried to pull Chrome from OpenEmbedded and also pulled in its deps .
But at the time of building chrome getting following errors can any one
have any idea ?
| + oe_runmake -r BUILDTYPE=Release
| + '[' xmake = x ']'
| + oenote make -e MAKEFLAGS= -r BUILDTYPE=Release
| elease'
| NOTE: make -e MAKEFLAGS= -r BUILDTYPE=Release
| + make -e MAKEFLAGS= -r BUILDTYPE=Release
| CXX(target) out/Release/obj.target/app_base/ui/base/animation/animation.o
| cc1plus: warnings being treated as errors
| cc1plus: error: include location "/usr/include/libpng12" is unsafe for cross-compilation
| cc1plus: error: include location "/usr/include/gtk-2.0" is unsafe for cross-compilation
| cc1plus: error: include location "/usr/include/atk-1.0" is unsafe for cross-compilation
| cc1plus: error: include location
| + echo NOTE: 'make -e MAKEFLAGS= -r BUILDTYPE=Release'
| NOTE: make -e MAKEFLAGS= -r BUILDTYPE=Release
| + make -e MAKEFLAGS= -r BUILDTYPE=Release
| CXX(target) out/Release/obj.target/app_base/ui/base/animation/animation.o
| cc1plus: warnings being treated as errors
| cc1plus: error: include location "/usr/include/libpng12" is unsafe for cross-compilation
| cc1plus: error: include location "/usr/include/gtk-2.0" is unsafe for cross-compilation
| cc1plus: error: include location "/usr/include/atk-1.0" is unsafe for cross-compilation
| "/usr/include/cairo" is unsafe for cross-compilation
| cc1plus: error: include location "/usr/include/pango-1.0" is unsafe for cross-compilation
| cc1plus: error: include location "/usr/include/gio-unix-2.0/" is unsafe for cross-compilation
| cc1plus: error: include location "/usr/include/glib-2.0" is unsafe for cross-compilation
| cc1plus: error: include location "/usr/include/pixman-1" is unsafe for cross-compilation
| cc1plus: error: include location "/usr/include/freetype2" is unsafe for cross-compilation
| cc1plus
| cc1plus: error: include location "/usr/include/cairo" is unsafe for cross-compilation
| cc1plus: error: include location "/usr/include/pango-1.0" is unsafe for cross-compilation
| cc1plus: error: include location "/usr/include/gio-unix-2.0/" is unsafe for cross-compilation
| cc1plus: error: include location "/usr/include/glib-2.0" is unsafe for cross-compilation
| cc1plus: error: include location "/usr/include/pixman-1" is unsafe for cross-compilation
| cc1plus: error: include location "/usr/include/freetype2" is unsafe for cross-compilation
| : error: include location "/usr/include/directfb" is unsafe for cross-compilation
| make: *** [out/Release/obj.target/app_base/ui/base/animation/animation.o] Error 1
| + die 'oe_runmake failed'
| + oefatal 'oe_runmake failed'
| + echo FATAL: 'oe_runmake failed'
| FATAL: oe_runmake failed
| + exit 1
|
| cc1plus: error: include location "/usr/include/directfb" is unsafe for cross-compilation
| make: *** [out/Release/obj.target/app_base/ui/base/animation/animation.o] Error 1
| + die 'oe_runmake failed'
| + oefatal 'oe_runmake failed'
| + echo FATAL: 'oe_runmake failed'
| FATAL: oe_runmake failed
| + exit 1
Thanks
Yogesh
On Tuesday 08 February 2011 09:32 AM, embedded.yogesh wrote:
> On Tuesday 08 February 2011 12:05 AM, Gary Thomas wrote:
>> On 02/07/2011 11:23 AM, Darren Hart wrote:
>>> On 02/07/2011 04:51 AM, embedded.yogesh wrote:
>>>> On Monday 07 February 2011 05:45 PM, Gary Thomas wrote:
>>>>> On 02/06/2011 09:52 PM, yogesh lal wrote:
>>>>>> Hi,
>>>>>>
>>>>>> I am new to poky, so don't know it will make any sense or not, but
>>>>>> can we build chromium browser using Poky ?
>>>>>
>>>>> What's your target architecture? Last I checked, only x86 and ARM
>>>>> are supported.
>>>>>
>>>>> It can be done, but it's certainly not for the faint of heart :-)
>>>>>
>>>>
>>>> I am working on X86 platform. Can you give some initial start up
>>>> where I
>>>> have to look ?
>>>
>>> Find and download the Chromium source, then have a look at the Poky
>>> Reference Guide for how to create an appropriate recipe, using
>>> recipes for projects with similar source layouts
>>> as examples.
>>>
>>> http://www.yoctoproject.org/docs/poky-ref-manual/poky-ref-manual.html
>>
>> Probably a lot easier to start with the OpenEmbedded recipe
>> since it already works. The biggest problem is that there
>> are a ton of dependencies, so you'll need to bring in those
>> recipes as well.
>>
>
> Thanks Gary Thomas and Darren Hart ,
>
> I am look in to poky-ref-manual and OpenEmbedded recipes :)
>
> ---
> Yogesh
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: chromium browser
2011-02-21 5:33 ` embedded.yogesh
@ 2011-02-22 11:13 ` Richard Purdie
0 siblings, 0 replies; 14+ messages in thread
From: Richard Purdie @ 2011-02-22 11:13 UTC (permalink / raw)
To: embedded.yogesh; +Cc: poky
Hi,
On Mon, 2011-02-21 at 11:03 +0530, embedded.yogesh wrote:
> I tried to pull Chrome from OpenEmbedded and also pulled in its deps .
> But at the time of building chrome getting following errors can any one
> have any idea ?
>
> | + oe_runmake -r BUILDTYPE=Release
> | + '[' xmake = x ']'
> | + oenote make -e MAKEFLAGS= -r BUILDTYPE=Release
> | elease'
> | NOTE: make -e MAKEFLAGS= -r BUILDTYPE=Release
> | + make -e MAKEFLAGS= -r BUILDTYPE=Release
> | CXX(target) out/Release/obj.target/app_base/ui/base/animation/animation.o
> | cc1plus: warnings being treated as errors
> | cc1plus: error: include location "/usr/include/libpng12" is unsafe for cross-compilation
> | cc1plus: error: include location "/usr/include/gtk-2.0" is unsafe for cross-compilation
> | cc1plus: error: include location "/usr/include/atk-1.0" is unsafe for cross-compilation
> | cc1plus: error: include location
Its accessing parts of the build system (/usr/include) and the compiler
is turning warnings into errors and failing. You need to fix the build
to use the sysroot for cross compiling and not to look at the build
system.
Cheers,
Richard
^ permalink raw reply [flat|nested] 14+ messages in thread
* chromium browser
@ 2016-03-07 8:30 Praveenreddy Padamati
2016-03-07 9:11 ` Gary Thomas
0 siblings, 1 reply; 14+ messages in thread
From: Praveenreddy Padamati @ 2016-03-07 8:30 UTC (permalink / raw)
To: 'bitbake-devel@lists.openembedded.org'
[-- Attachment #1: Type: text/plain, Size: 1918 bytes --]
Hi,
When I added chromium browser in yocto build configuration then bitbake is stucking at do compile. Can you please help me?
Thanks and Regards,
Praveen Reddy P
HCL Technologies Ltd | Lead Engineer | Alstom ODC| ERS-SS-SCS-Embedded Platform Lab
Phone: +914443935173 | Mobile: +919989642159 | E-mail: praveenreddy.p@hcl.com<mailto:praveenreddy.p@hcl.com>
Company address: HCL Technologies Ltd ,73-74, South Phase,Ambattur Industrial Estate (AMB-5), Chennai - 600 058,India
Switchboard: +91-44-4393-5000 WebSite: www.hclt.com<http://www.hclt.com/>
::DISCLAIMER::
----------------------------------------------------------------------------------------------------------------------------------------------------
The contents of this e-mail and any attachment(s) are confidential and intended for the named recipient(s) only.
E-mail transmission is not guaranteed to be secure or error-free as information could be intercepted, corrupted,
lost, destroyed, arrive late or incomplete, or may contain viruses in transmission. The e mail and its contents
(with or without referred errors) shall therefore not attach any liability on the originator or HCL or its affiliates.
Views or opinions, if any, presented in this email are solely those of the author and may not necessarily reflect the
views or opinions of HCL or its affiliates. Any form of reproduction, dissemination, copying, disclosure, modification,
distribution and / or publication of this message without the prior written consent of authorized representative of
HCL is strictly prohibited. If you have received this email in error please delete it and notify the sender immediately.
Before opening any email and/or attachments, please check them for viruses and other defects.
----------------------------------------------------------------------------------------------------------------------------------------------------
[-- Attachment #2: Type: text/html, Size: 6140 bytes --]
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: chromium browser
2016-03-07 8:30 Praveenreddy Padamati
@ 2016-03-07 9:11 ` Gary Thomas
2016-03-07 10:57 ` Praveenreddy Padamati
0 siblings, 1 reply; 14+ messages in thread
From: Gary Thomas @ 2016-03-07 9:11 UTC (permalink / raw)
To: bitbake-devel
On 2016-03-07 09:30, Praveenreddy Padamati wrote:
> Hi,
>
> When I added chromium browser in yocto build configuration then bitbake is stucking at do compile. Can you please help me?
>
How long have you waited? Depending on your target and host/build
settings, building chromium can take a LONG time (measured in hours)
--
------------------------------------------------------------
Gary Thomas | Consulting for the
MLB Associates | Embedded world
------------------------------------------------------------
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: chromium browser
2016-03-07 9:11 ` Gary Thomas
@ 2016-03-07 10:57 ` Praveenreddy Padamati
2016-03-07 11:05 ` Khem Raj
0 siblings, 1 reply; 14+ messages in thread
From: Praveenreddy Padamati @ 2016-03-07 10:57 UTC (permalink / raw)
To: 'Gary Thomas',
'bitbake-devel@lists.openembedded.org'
Hi,
Thanks for the reply. It took more than 24 hours and then we stopped it.
Thanks
Praveen Reddy P
-----Original Message-----
From: bitbake-devel-bounces@lists.openembedded.org [mailto:bitbake-devel-bounces@lists.openembedded.org] On Behalf Of Gary Thomas
Sent: Monday, March 07, 2016 2:42 PM
To: bitbake-devel@lists.openembedded.org
Subject: Re: [bitbake-devel] chromium browser
On 2016-03-07 09:30, Praveenreddy Padamati wrote:
> Hi,
>
> When I added chromium browser in yocto build configuration then bitbake is stucking at do compile. Can you please help me?
>
How long have you waited? Depending on your target and host/build settings, building chromium can take a LONG time (measured in hours)
--
------------------------------------------------------------
Gary Thomas | Consulting for the
MLB Associates | Embedded world
------------------------------------------------------------
--
_______________________________________________
bitbake-devel mailing list
bitbake-devel@lists.openembedded.org
http://lists.openembedded.org/mailman/listinfo/bitbake-devel
::DISCLAIMER::
----------------------------------------------------------------------------------------------------------------------------------------------------
The contents of this e-mail and any attachment(s) are confidential and intended for the named recipient(s) only.
E-mail transmission is not guaranteed to be secure or error-free as information could be intercepted, corrupted,
lost, destroyed, arrive late or incomplete, or may contain viruses in transmission. The e mail and its contents
(with or without referred errors) shall therefore not attach any liability on the originator or HCL or its affiliates.
Views or opinions, if any, presented in this email are solely those of the author and may not necessarily reflect the
views or opinions of HCL or its affiliates. Any form of reproduction, dissemination, copying, disclosure, modification,
distribution and / or publication of this message without the prior written consent of authorized representative of
HCL is strictly prohibited. If you have received this email in error please delete it and notify the sender immediately.
Before opening any email and/or attachments, please check them for viruses and other defects.
----------------------------------------------------------------------------------------------------------------------------------------------------
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: chromium browser
2016-03-07 10:57 ` Praveenreddy Padamati
@ 2016-03-07 11:05 ` Khem Raj
2016-03-07 11:43 ` Gary Thomas
0 siblings, 1 reply; 14+ messages in thread
From: Khem Raj @ 2016-03-07 11:05 UTC (permalink / raw)
To: Praveenreddy Padamati; +Cc: bitbake-devel, Gary Thomas
[-- Attachment #1: Type: text/plain, Size: 2999 bytes --]
What is your build machine configuration and look at log.do_cpmpile it
might have some info
On Mar 7, 2016 5:57 PM, "Praveenreddy Padamati" <praveenreddy.p@hcl.com>
wrote:
> Hi,
>
> Thanks for the reply. It took more than 24 hours and then we stopped it.
>
> Thanks
> Praveen Reddy P
>
> -----Original Message-----
> From: bitbake-devel-bounces@lists.openembedded.org [mailto:
> bitbake-devel-bounces@lists.openembedded.org] On Behalf Of Gary Thomas
> Sent: Monday, March 07, 2016 2:42 PM
> To: bitbake-devel@lists.openembedded.org
> Subject: Re: [bitbake-devel] chromium browser
>
> On 2016-03-07 09:30, Praveenreddy Padamati wrote:
> > Hi,
> >
> > When I added chromium browser in yocto build configuration then bitbake
> is stucking at do compile. Can you please help me?
> >
>
> How long have you waited? Depending on your target and host/build
> settings, building chromium can take a LONG time (measured in hours)
>
> --
> ------------------------------------------------------------
> Gary Thomas | Consulting for the
> MLB Associates | Embedded world
> ------------------------------------------------------------
> --
> _______________________________________________
> bitbake-devel mailing list
> bitbake-devel@lists.openembedded.org
> http://lists.openembedded.org/mailman/listinfo/bitbake-devel
>
>
> ::DISCLAIMER::
>
> ----------------------------------------------------------------------------------------------------------------------------------------------------
>
> The contents of this e-mail and any attachment(s) are confidential and
> intended for the named recipient(s) only.
> E-mail transmission is not guaranteed to be secure or error-free as
> information could be intercepted, corrupted,
> lost, destroyed, arrive late or incomplete, or may contain viruses in
> transmission. The e mail and its contents
> (with or without referred errors) shall therefore not attach any liability
> on the originator or HCL or its affiliates.
> Views or opinions, if any, presented in this email are solely those of the
> author and may not necessarily reflect the
> views or opinions of HCL or its affiliates. Any form of reproduction,
> dissemination, copying, disclosure, modification,
> distribution and / or publication of this message without the prior
> written consent of authorized representative of
> HCL is strictly prohibited. If you have received this email in error
> please delete it and notify the sender immediately.
> Before opening any email and/or attachments, please check them for viruses
> and other defects.
>
>
> ----------------------------------------------------------------------------------------------------------------------------------------------------
>
> --
> _______________________________________________
> bitbake-devel mailing list
> bitbake-devel@lists.openembedded.org
> http://lists.openembedded.org/mailman/listinfo/bitbake-devel
>
[-- Attachment #2: Type: text/html, Size: 3866 bytes --]
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: chromium browser
2016-03-07 11:05 ` Khem Raj
@ 2016-03-07 11:43 ` Gary Thomas
2016-03-08 7:03 ` Praveenreddy Padamati
0 siblings, 1 reply; 14+ messages in thread
From: Gary Thomas @ 2016-03-07 11:43 UTC (permalink / raw)
To: Khem Raj, Praveenreddy Padamati; +Cc: bitbake-devel
On 2016-03-07 12:05, Khem Raj wrote:
> What is your build machine configuration and look at log.do_cpmpile it might have some info
>
Also note that depending on your linker choice the build can need a lot of RAM and if your
build machine doesn't have enough you'll spend a lot of time swapping. I would suggest that
your build host has at least 4GB RAM to build chromium.
> On Mar 7, 2016 5:57 PM, "Praveenreddy Padamati" <praveenreddy.p@hcl.com <mailto:praveenreddy.p@hcl.com>> wrote:
>
> Hi,
>
> Thanks for the reply. It took more than 24 hours and then we stopped it.
>
> Thanks
> Praveen Reddy P
>
> -----Original Message-----
> From: bitbake-devel-bounces@lists.openembedded.org <mailto:bitbake-devel-bounces@lists.openembedded.org>
> [mailto:bitbake-devel-bounces@lists.openembedded.org <mailto:bitbake-devel-bounces@lists.openembedded.org>] On
> Behalf Of Gary Thomas
> Sent: Monday, March 07, 2016 2:42 PM
> To: bitbake-devel@lists.openembedded.org <mailto:bitbake-devel@lists.openembedded.org>
> Subject: Re: [bitbake-devel] chromium browser
>
> On 2016-03-07 09:30, Praveenreddy Padamati wrote:
> > Hi,
> >
> > When I added chromium browser in yocto build configuration then bitbake is stucking at do compile. Can you please
> help me?
> >
>
> How long have you waited? Depending on your target and host/build settings, building chromium can take a LONG time
> (measured in hours)
>
--
------------------------------------------------------------
Gary Thomas | Consulting for the
MLB Associates | Embedded world
------------------------------------------------------------
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: chromium browser
2016-03-07 11:43 ` Gary Thomas
@ 2016-03-08 7:03 ` Praveenreddy Padamati
0 siblings, 0 replies; 14+ messages in thread
From: Praveenreddy Padamati @ 2016-03-08 7:03 UTC (permalink / raw)
To: 'Gary Thomas', 'Khem Raj'; +Cc: 'bitbake-devel'
Hi all,
My build system has 4gb ram.
And I found many log.do_compile files. Can you tell me which log file I need to see for the core image sato.
Thanks
Praveen Reddy P
-----Original Message-----
From: Gary Thomas [mailto:gary@mlbassoc.com]
Sent: Monday, March 07, 2016 5:13 PM
To: Khem Raj; Praveenreddy Padamati
Cc: bitbake-devel
Subject: Re: [bitbake-devel] chromium browser
On 2016-03-07 12:05, Khem Raj wrote:
> What is your build machine configuration and look at log.do_cpmpile it
> might have some info
>
Also note that depending on your linker choice the build can need a lot of RAM and if your build machine doesn't have enough you'll spend a lot of time swapping. I would suggest that your build host has at least 4GB RAM to build chromium.
> On Mar 7, 2016 5:57 PM, "Praveenreddy Padamati" <praveenreddy.p@hcl.com <mailto:praveenreddy.p@hcl.com>> wrote:
>
> Hi,
>
> Thanks for the reply. It took more than 24 hours and then we stopped it.
>
> Thanks
> Praveen Reddy P
>
> -----Original Message-----
> From: bitbake-devel-bounces@lists.openembedded.org <mailto:bitbake-devel-bounces@lists.openembedded.org>
> [mailto:bitbake-devel-bounces@lists.openembedded.org <mailto:bitbake-devel-bounces@lists.openembedded.org>] On
> Behalf Of Gary Thomas
> Sent: Monday, March 07, 2016 2:42 PM
> To: bitbake-devel@lists.openembedded.org <mailto:bitbake-devel@lists.openembedded.org>
> Subject: Re: [bitbake-devel] chromium browser
>
> On 2016-03-07 09:30, Praveenreddy Padamati wrote:
> > Hi,
> >
> > When I added chromium browser in yocto build configuration then bitbake is stucking at do compile. Can you please
> help me?
> >
>
> How long have you waited? Depending on your target and host/build settings, building chromium can take a LONG time
> (measured in hours)
>
--
------------------------------------------------------------
Gary Thomas | Consulting for the
MLB Associates | Embedded world
------------------------------------------------------------
::DISCLAIMER::
----------------------------------------------------------------------------------------------------------------------------------------------------
The contents of this e-mail and any attachment(s) are confidential and intended for the named recipient(s) only.
E-mail transmission is not guaranteed to be secure or error-free as information could be intercepted, corrupted,
lost, destroyed, arrive late or incomplete, or may contain viruses in transmission. The e mail and its contents
(with or without referred errors) shall therefore not attach any liability on the originator or HCL or its affiliates.
Views or opinions, if any, presented in this email are solely those of the author and may not necessarily reflect the
views or opinions of HCL or its affiliates. Any form of reproduction, dissemination, copying, disclosure, modification,
distribution and / or publication of this message without the prior written consent of authorized representative of
HCL is strictly prohibited. If you have received this email in error please delete it and notify the sender immediately.
Before opening any email and/or attachments, please check them for viruses and other defects.
----------------------------------------------------------------------------------------------------------------------------------------------------
^ permalink raw reply [flat|nested] 14+ messages in thread
end of thread, other threads:[~2016-03-08 7:03 UTC | newest]
Thread overview: 14+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2011-02-07 4:52 chromium browser yogesh lal
2011-02-07 12:15 ` Gary Thomas
2011-02-07 12:51 ` embedded.yogesh
2011-02-07 18:23 ` Darren Hart
2011-02-07 18:35 ` Gary Thomas
2011-02-08 4:02 ` embedded.yogesh
2011-02-21 5:33 ` embedded.yogesh
2011-02-22 11:13 ` Richard Purdie
-- strict thread matches above, loose matches on Subject: below --
2016-03-07 8:30 Praveenreddy Padamati
2016-03-07 9:11 ` Gary Thomas
2016-03-07 10:57 ` Praveenreddy Padamati
2016-03-07 11:05 ` Khem Raj
2016-03-07 11:43 ` Gary Thomas
2016-03-08 7:03 ` Praveenreddy Padamati
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.