* Adding machine for linux-yocto-stable @ 2011-02-08 13:46 Diego Sueiro 2011-02-08 14:11 ` Bruce Ashfield 0 siblings, 1 reply; 6+ messages in thread From: Diego Sueiro @ 2011-02-08 13:46 UTC (permalink / raw) To: yocto [-- Attachment #1: Type: text/plain, Size: 454 bytes --] Folks, I'm trying to get devkit8000 kernel compiled with linux-yocto-stable recipe. I've added devkit8000 on COMPATIBLE_MACHINE and on KMACHINE_dekvkit800. But I don't know what pokylinux branch to use to make the kernel build works. I believe that I have to config these variables: LINUX_KERNEL_TYPE SRCREV_machine_pn-linux-yocto-stable_devkit8000 Any suggestions? Regards, -- *dS Diego Sueiro /*long live rock 'n roll*/ [-- Attachment #2: Type: text/html, Size: 839 bytes --] ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: Adding machine for linux-yocto-stable 2011-02-08 13:46 Adding machine for linux-yocto-stable Diego Sueiro @ 2011-02-08 14:11 ` Bruce Ashfield 2011-02-08 17:31 ` Diego Sueiro 0 siblings, 1 reply; 6+ messages in thread From: Bruce Ashfield @ 2011-02-08 14:11 UTC (permalink / raw) To: Diego Sueiro; +Cc: yocto On 11-02-08 08:46 AM, Diego Sueiro wrote: > Folks, > > I'm trying to get devkit8000 kernel compiled with linux-yocto-stable recipe. > I've added devkit8000 on COMPATIBLE_MACHINE and on KMACHINE_dekvkit800. > > But I don't know what pokylinux branch to use to make the kernel build > works. > > I believe that I have to config these variables: > > LINUX_KERNEL_TYPE This one defaults to something sane, so you don't need to set this line. > SRCREV_machine_pn-linux-yocto-stable_devkit8000 You would need to set this, to a SRCREV of the branch you'll end up building. > > > Any suggestions? Are you working out of an up to date master ? I've made some changes recently that allow BSPs to bootstrap/reuse existing branches. If you aren't on the latest master the procedure is different. Cheers, Bruce > > Regards, > > -- > *dS > Diego Sueiro > > /*long live rock 'n roll*/ > > > > _______________________________________________ > yocto mailing list > yocto@yoctoproject.org > https://lists.yoctoproject.org/listinfo/yocto ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: Adding machine for linux-yocto-stable 2011-02-08 14:11 ` Bruce Ashfield @ 2011-02-08 17:31 ` Diego Sueiro 2011-02-08 17:38 ` Bruce Ashfield 0 siblings, 1 reply; 6+ messages in thread From: Diego Sueiro @ 2011-02-08 17:31 UTC (permalink / raw) To: Bruce Ashfield; +Cc: yocto [-- Attachment #1: Type: text/plain, Size: 3039 bytes --] Bruce, I've updated my yocto tree but I'm still getting this error: ERROR: Function 'do_kernel_checkout' failed (see /home/dev-2/yocto/build/tmp/work/bw-b600-poky-linux-gnueabi/linux-yocto-stable-2.6.34+git1+e1f85a470934a0cf6abde5d95533e74501822c6b_6+72ca49ab08b8eb475cec82a10049503602325791-r1/temp/log.do_kernel_checkout.26330 for further information) ERROR: Logfile of failure stored in: /home/dev-2/yocto/build/tmp/work/bw-b600-poky-linux-gnueabi/linux-yocto-stable-2.6.34+git1+e1f85a470934a0cf6abde5d95533e74501822c6b_6+72ca49ab08b8eb475cec82a10049503602325791-r1/temp/log.do_kernel_checkout.26330 Log data follows: | Fixing up git directory for standard/devkit8000 | error: pathspec 'devkit8000-standard' did not match any file(s) known to git. | ERROR: Function 'do_kernel_checkout' failed (see /home/dev-2/yocto/build/tmp/work/bw-b600-poky-linux-gnueabi/linux-yocto-stable-2.6.34+git1+e1f85a470934a0cf6abde5d95533e74501822c6b_6+72ca49ab08b8eb475cec82a10049503602325791-r1/temp/log.do_kernel_checkout.26330 for further information) NOTE: package linux-yocto-stable-2.6.34+git1+e1f85a470934a0cf6abde5d95533e74501822c6b_6+72ca49ab08b8eb475cec82a10049503602325791-r1: task do_kernel_checkout: Failed ERROR: Task 1 (/home/dev-2/yocto/poky/meta-boardware/recipes-kernel/linux/ linux-yocto-stable_git.bb, do_kernel_checkout) failed with exit code '1' I've tried this two options on SRCREV_machine_pn-linux-yocto-stable_devkit8000: "ef7f944e773950d4016b7643f9ecf052bbe250cd" = beagleboard-standard branch "2b1caf6ed7b888c95a1909d343799672731651a5" = master branch "72ca49ab08b8eb475cec82a10049503602325791" = standard branch There isn't an specific devki8000 branch. Regards, -- *dS Diego Sueiro /*long live rock 'n roll*/ On Tue, Feb 8, 2011 at 12:11 PM, Bruce Ashfield < bruce.ashfield@windriver.com> wrote: > On 11-02-08 08:46 AM, Diego Sueiro wrote: > >> Folks, >> >> I'm trying to get devkit8000 kernel compiled with linux-yocto-stable >> recipe. >> I've added devkit8000 on COMPATIBLE_MACHINE and on KMACHINE_dekvkit800. >> >> But I don't know what pokylinux branch to use to make the kernel build >> works. >> >> I believe that I have to config these variables: >> >> LINUX_KERNEL_TYPE >> > > This one defaults to something sane, so you don't need > to set this line. > > > SRCREV_machine_pn-linux-yocto-stable_devkit8000 >> > > You would need to set this, to a SRCREV of the branch you'll > end up building. > > >> >> Any suggestions? >> > > Are you working out of an up to date master ? I've made some > changes recently that allow BSPs to bootstrap/reuse existing > branches. If you aren't on the latest master the procedure > is different. > > Cheers, > > Bruce > > >> Regards, >> >> -- >> *dS >> Diego Sueiro >> >> /*long live rock 'n roll*/ >> >> >> >> _______________________________________________ >> yocto mailing list >> yocto@yoctoproject.org >> https://lists.yoctoproject.org/listinfo/yocto >> > > [-- Attachment #2: Type: text/html, Size: 4550 bytes --] ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: Adding machine for linux-yocto-stable 2011-02-08 17:31 ` Diego Sueiro @ 2011-02-08 17:38 ` Bruce Ashfield 2011-02-08 18:04 ` Diego Sueiro 0 siblings, 1 reply; 6+ messages in thread From: Bruce Ashfield @ 2011-02-08 17:38 UTC (permalink / raw) To: Diego Sueiro; +Cc: yocto On 11-02-08 12:31 PM, Diego Sueiro wrote: > Bruce, > > I've updated my yocto tree but I'm still getting this error: > > ERROR: Function 'do_kernel_checkout' failed (see > /home/dev-2/yocto/build/tmp/work/bw-b600-poky-linux-gnueabi/linux-yocto-stable-2.6.34+git1+e1f85a470934a0cf6abde5d95533e74501822c6b_6+72ca49ab08b8eb475cec82a10049503602325791-r1/temp/log.do_kernel_checkout.26330 > for further information) > ERROR: Logfile of failure stored in: > /home/dev-2/yocto/build/tmp/work/bw-b600-poky-linux-gnueabi/linux-yocto-stable-2.6.34+git1+e1f85a470934a0cf6abde5d95533e74501822c6b_6+72ca49ab08b8eb475cec82a10049503602325791-r1/temp/log.do_kernel_checkout.26330 > Log data follows: > | Fixing up git directory for standard/devkit8000 > | error: pathspec 'devkit8000-standard' did not match any file(s) known > to git. > | ERROR: Function 'do_kernel_checkout' failed (see > /home/dev-2/yocto/build/tmp/work/bw-b600-poky-linux-gnueabi/linux-yocto-stable-2.6.34+git1+e1f85a470934a0cf6abde5d95533e74501822c6b_6+72ca49ab08b8eb475cec82a10049503602325791-r1/temp/log.do_kernel_checkout.26330 > for further information) > NOTE: package > linux-yocto-stable-2.6.34+git1+e1f85a470934a0cf6abde5d95533e74501822c6b_6+72ca49ab08b8eb475cec82a10049503602325791-r1: > task do_kernel_checkout: Failed > ERROR: Task 1 > (/home/dev-2/yocto/poky/meta-boardware/recipes-kernel/linux/linux-yocto-stable_git.bb > <http://linux-yocto-stable_git.bb>, do_kernel_checkout) failed with exit > code '1' This is the typical BSP bootstrap 'problem'. Hold on for just a little while longer, with the new fetcher changes in master, I'm updating the recipes (literally now) to fix this and am testing the workflow for adding a new board as part of these changes. Cheers, Bruce > > I've tried this two options on > SRCREV_machine_pn-linux-yocto-stable_devkit8000: > > "ef7f944e773950d4016b7643f9ecf052bbe250cd" = beagleboard-standard branch > "2b1caf6ed7b888c95a1909d343799672731651a5" = master branch > "72ca49ab08b8eb475cec82a10049503602325791" = standard branch > > > There isn't an specific devki8000 branch. > > Regards, > > -- > *dS > Diego Sueiro > > /*long live rock 'n roll*/ > > > On Tue, Feb 8, 2011 at 12:11 PM, Bruce Ashfield > <bruce.ashfield@windriver.com <mailto:bruce.ashfield@windriver.com>> wrote: > > On 11-02-08 08:46 AM, Diego Sueiro wrote: > > Folks, > > I'm trying to get devkit8000 kernel compiled with > linux-yocto-stable recipe. > I've added devkit8000 on COMPATIBLE_MACHINE and on > KMACHINE_dekvkit800. > > But I don't know what pokylinux branch to use to make the kernel > build > works. > > I believe that I have to config these variables: > > LINUX_KERNEL_TYPE > > > This one defaults to something sane, so you don't need > to set this line. > > > SRCREV_machine_pn-linux-yocto-stable_devkit8000 > > > You would need to set this, to a SRCREV of the branch you'll > end up building. > > > > Any suggestions? > > > Are you working out of an up to date master ? I've made some > changes recently that allow BSPs to bootstrap/reuse existing > branches. If you aren't on the latest master the procedure > is different. > > Cheers, > > Bruce > > > Regards, > > -- > *dS > Diego Sueiro > > /*long live rock 'n roll*/ > > > > _______________________________________________ > yocto mailing list > yocto@yoctoproject.org <mailto:yocto@yoctoproject.org> > https://lists.yoctoproject.org/listinfo/yocto > > > ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: Adding machine for linux-yocto-stable 2011-02-08 17:38 ` Bruce Ashfield @ 2011-02-08 18:04 ` Diego Sueiro 2011-02-08 18:15 ` Diego Sueiro 0 siblings, 1 reply; 6+ messages in thread From: Diego Sueiro @ 2011-02-08 18:04 UTC (permalink / raw) To: Bruce Ashfield; +Cc: yocto [-- Attachment #1: Type: text/plain, Size: 5146 bytes --] Bruce, I'm getting this error for linux-libc-headers-yocto too. ERROR: Function 'opkg-build execution failed' failed ERROR: Logfile of failure stored in: /home/dev-2/yocto/build/tmp/work/armv7a-poky-linux-gnueabi/linux-libc-headers-yocto-2.6.37+git-4+343c06b25b221aa7f7019aee83b2d976041fddce_2+yocto/standard/base-r2/temp/log.do_package_write_ipk.16387 Log data follows: | ar: /home/dev-2/yocto/build/tmp/work/armv7a-poky-linux-gnueabi/linux-libc-headers-yocto-2.6.37+git-4+343c06b25b221aa7f7019aee83b2d976041fddce_2+yocto/standard/base-r2/deploy-ipks/armv7a/linux-libc-headers-yocto-dbg_2.6.37+git-4+343c06b25b221aa7f7019aee83b2d976041fddce_2+yocto/standard/base-r2_armv7a.ipk: No such file or directory | ERROR: Function 'opkg-build execution failed' failed NOTE: package linux-libc-headers-yocto-2.6.37+git-4+343c06b25b221aa7f7019aee83b2d976041fddce_2+yocto/standard/base-r2: task opkg-build execution failed: Failed ERROR: Task 547 (/home/dev-2/yocto/poky/meta/recipes-kernel/linux-libc-headers/ linux-libc-headers-yocto_git.bb, do_package_write_ipk) failed with exit code '1' Regards, -- *dS Diego Sueiro /*long live rock 'n roll*/ On Tue, Feb 8, 2011 at 3:38 PM, Bruce Ashfield <bruce.ashfield@windriver.com > wrote: > On 11-02-08 12:31 PM, Diego Sueiro wrote: > >> Bruce, >> >> I've updated my yocto tree but I'm still getting this error: >> >> ERROR: Function 'do_kernel_checkout' failed (see >> >> /home/dev-2/yocto/build/tmp/work/bw-b600-poky-linux-gnueabi/linux-yocto-stable-2.6.34+git1+e1f85a470934a0cf6abde5d95533e74501822c6b_6+72ca49ab08b8eb475cec82a10049503602325791-r1/temp/log.do_kernel_checkout.26330 >> for further information) >> ERROR: Logfile of failure stored in: >> >> /home/dev-2/yocto/build/tmp/work/bw-b600-poky-linux-gnueabi/linux-yocto-stable-2.6.34+git1+e1f85a470934a0cf6abde5d95533e74501822c6b_6+72ca49ab08b8eb475cec82a10049503602325791-r1/temp/log.do_kernel_checkout.26330 >> Log data follows: >> | Fixing up git directory for standard/devkit8000 >> | error: pathspec 'devkit8000-standard' did not match any file(s) known >> to git. >> | ERROR: Function 'do_kernel_checkout' failed (see >> >> /home/dev-2/yocto/build/tmp/work/bw-b600-poky-linux-gnueabi/linux-yocto-stable-2.6.34+git1+e1f85a470934a0cf6abde5d95533e74501822c6b_6+72ca49ab08b8eb475cec82a10049503602325791-r1/temp/log.do_kernel_checkout.26330 >> for further information) >> NOTE: package >> >> linux-yocto-stable-2.6.34+git1+e1f85a470934a0cf6abde5d95533e74501822c6b_6+72ca49ab08b8eb475cec82a10049503602325791-r1: >> task do_kernel_checkout: Failed >> ERROR: Task 1 >> (/home/dev-2/yocto/poky/meta-boardware/recipes-kernel/linux/ >> linux-yocto-stable_git.bb >> <http://linux-yocto-stable_git.bb>, do_kernel_checkout) failed with exit >> code '1' >> > > This is the typical BSP bootstrap 'problem'. Hold on for > just a little while longer, with the new fetcher changes > in master, I'm updating the recipes (literally now) to > fix this and am testing the workflow for adding a new board > as part of these changes. > > Cheers, > > Bruce > > >> I've tried this two options on >> SRCREV_machine_pn-linux-yocto-stable_devkit8000: >> >> "ef7f944e773950d4016b7643f9ecf052bbe250cd" = beagleboard-standard >> branch >> "2b1caf6ed7b888c95a1909d343799672731651a5" = master branch >> "72ca49ab08b8eb475cec82a10049503602325791" = standard branch >> >> >> There isn't an specific devki8000 branch. >> >> Regards, >> >> -- >> *dS >> Diego Sueiro >> >> /*long live rock 'n roll*/ >> >> >> On Tue, Feb 8, 2011 at 12:11 PM, Bruce Ashfield >> <bruce.ashfield@windriver.com <mailto:bruce.ashfield@windriver.com>> >> wrote: >> >> On 11-02-08 08:46 AM, Diego Sueiro wrote: >> >> Folks, >> >> I'm trying to get devkit8000 kernel compiled with >> linux-yocto-stable recipe. >> I've added devkit8000 on COMPATIBLE_MACHINE and on >> KMACHINE_dekvkit800. >> >> But I don't know what pokylinux branch to use to make the kernel >> build >> works. >> >> I believe that I have to config these variables: >> >> LINUX_KERNEL_TYPE >> >> >> This one defaults to something sane, so you don't need >> to set this line. >> >> >> SRCREV_machine_pn-linux-yocto-stable_devkit8000 >> >> >> You would need to set this, to a SRCREV of the branch you'll >> end up building. >> >> >> >> Any suggestions? >> >> >> Are you working out of an up to date master ? I've made some >> changes recently that allow BSPs to bootstrap/reuse existing >> branches. If you aren't on the latest master the procedure >> is different. >> >> Cheers, >> >> Bruce >> >> >> Regards, >> >> -- >> *dS >> Diego Sueiro >> >> /*long live rock 'n roll*/ >> >> >> >> _______________________________________________ >> yocto mailing list >> yocto@yoctoproject.org <mailto:yocto@yoctoproject.org> >> >> https://lists.yoctoproject.org/listinfo/yocto >> >> >> >> > [-- Attachment #2: Type: text/html, Size: 6803 bytes --] ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: Adding machine for linux-yocto-stable 2011-02-08 18:04 ` Diego Sueiro @ 2011-02-08 18:15 ` Diego Sueiro 0 siblings, 0 replies; 6+ messages in thread From: Diego Sueiro @ 2011-02-08 18:15 UTC (permalink / raw) To: Bruce Ashfield; +Cc: yocto [-- Attachment #1: Type: text/plain, Size: 5603 bytes --] Bruce, linux-libc-headers-yocto issue solved after yocto update. Now, I'm waiting for linux-yocto-stable. Regards, -- *dS Diego Sueiro /*long live rock 'n roll*/ On Tue, Feb 8, 2011 at 4:04 PM, Diego Sueiro <diego.sueiro@gmail.com> wrote: > Bruce, > > I'm getting this error for linux-libc-headers-yocto too. > > > ERROR: Function 'opkg-build execution failed' failed > ERROR: Logfile of failure stored in: > /home/dev-2/yocto/build/tmp/work/armv7a-poky-linux-gnueabi/linux-libc-headers-yocto-2.6.37+git-4+343c06b25b221aa7f7019aee83b2d976041fddce_2+yocto/standard/base-r2/temp/log.do_package_write_ipk.16387 > Log data follows: > | ar: > /home/dev-2/yocto/build/tmp/work/armv7a-poky-linux-gnueabi/linux-libc-headers-yocto-2.6.37+git-4+343c06b25b221aa7f7019aee83b2d976041fddce_2+yocto/standard/base-r2/deploy-ipks/armv7a/linux-libc-headers-yocto-dbg_2.6.37+git-4+343c06b25b221aa7f7019aee83b2d976041fddce_2+yocto/standard/base-r2_armv7a.ipk: > No such file or directory > | ERROR: Function 'opkg-build execution failed' failed > NOTE: package > linux-libc-headers-yocto-2.6.37+git-4+343c06b25b221aa7f7019aee83b2d976041fddce_2+yocto/standard/base-r2: > task opkg-build execution failed: Failed > ERROR: Task 547 > (/home/dev-2/yocto/poky/meta/recipes-kernel/linux-libc-headers/ > linux-libc-headers-yocto_git.bb, do_package_write_ipk) failed with exit > code '1' > > > Regards, > > -- > *dS > Diego Sueiro > > /*long live rock 'n roll*/ > > > On Tue, Feb 8, 2011 at 3:38 PM, Bruce Ashfield < > bruce.ashfield@windriver.com> wrote: > >> On 11-02-08 12:31 PM, Diego Sueiro wrote: >> >>> Bruce, >>> >>> I've updated my yocto tree but I'm still getting this error: >>> >>> ERROR: Function 'do_kernel_checkout' failed (see >>> >>> /home/dev-2/yocto/build/tmp/work/bw-b600-poky-linux-gnueabi/linux-yocto-stable-2.6.34+git1+e1f85a470934a0cf6abde5d95533e74501822c6b_6+72ca49ab08b8eb475cec82a10049503602325791-r1/temp/log.do_kernel_checkout.26330 >>> for further information) >>> ERROR: Logfile of failure stored in: >>> >>> /home/dev-2/yocto/build/tmp/work/bw-b600-poky-linux-gnueabi/linux-yocto-stable-2.6.34+git1+e1f85a470934a0cf6abde5d95533e74501822c6b_6+72ca49ab08b8eb475cec82a10049503602325791-r1/temp/log.do_kernel_checkout.26330 >>> Log data follows: >>> | Fixing up git directory for standard/devkit8000 >>> | error: pathspec 'devkit8000-standard' did not match any file(s) known >>> to git. >>> | ERROR: Function 'do_kernel_checkout' failed (see >>> >>> /home/dev-2/yocto/build/tmp/work/bw-b600-poky-linux-gnueabi/linux-yocto-stable-2.6.34+git1+e1f85a470934a0cf6abde5d95533e74501822c6b_6+72ca49ab08b8eb475cec82a10049503602325791-r1/temp/log.do_kernel_checkout.26330 >>> for further information) >>> NOTE: package >>> >>> linux-yocto-stable-2.6.34+git1+e1f85a470934a0cf6abde5d95533e74501822c6b_6+72ca49ab08b8eb475cec82a10049503602325791-r1: >>> task do_kernel_checkout: Failed >>> ERROR: Task 1 >>> (/home/dev-2/yocto/poky/meta-boardware/recipes-kernel/linux/ >>> linux-yocto-stable_git.bb >>> <http://linux-yocto-stable_git.bb>, do_kernel_checkout) failed with exit >>> code '1' >>> >> >> This is the typical BSP bootstrap 'problem'. Hold on for >> just a little while longer, with the new fetcher changes >> in master, I'm updating the recipes (literally now) to >> fix this and am testing the workflow for adding a new board >> as part of these changes. >> >> Cheers, >> >> Bruce >> >> >>> I've tried this two options on >>> SRCREV_machine_pn-linux-yocto-stable_devkit8000: >>> >>> "ef7f944e773950d4016b7643f9ecf052bbe250cd" = beagleboard-standard >>> branch >>> "2b1caf6ed7b888c95a1909d343799672731651a5" = master branch >>> "72ca49ab08b8eb475cec82a10049503602325791" = standard branch >>> >>> >>> There isn't an specific devki8000 branch. >>> >>> Regards, >>> >>> -- >>> *dS >>> Diego Sueiro >>> >>> /*long live rock 'n roll*/ >>> >>> >>> On Tue, Feb 8, 2011 at 12:11 PM, Bruce Ashfield >>> <bruce.ashfield@windriver.com <mailto:bruce.ashfield@windriver.com>> >>> wrote: >>> >>> On 11-02-08 08:46 AM, Diego Sueiro wrote: >>> >>> Folks, >>> >>> I'm trying to get devkit8000 kernel compiled with >>> linux-yocto-stable recipe. >>> I've added devkit8000 on COMPATIBLE_MACHINE and on >>> KMACHINE_dekvkit800. >>> >>> But I don't know what pokylinux branch to use to make the kernel >>> build >>> works. >>> >>> I believe that I have to config these variables: >>> >>> LINUX_KERNEL_TYPE >>> >>> >>> This one defaults to something sane, so you don't need >>> to set this line. >>> >>> >>> SRCREV_machine_pn-linux-yocto-stable_devkit8000 >>> >>> >>> You would need to set this, to a SRCREV of the branch you'll >>> end up building. >>> >>> >>> >>> Any suggestions? >>> >>> >>> Are you working out of an up to date master ? I've made some >>> changes recently that allow BSPs to bootstrap/reuse existing >>> branches. If you aren't on the latest master the procedure >>> is different. >>> >>> Cheers, >>> >>> Bruce >>> >>> >>> Regards, >>> >>> -- >>> *dS >>> Diego Sueiro >>> >>> /*long live rock 'n roll*/ >>> >>> >>> >>> _______________________________________________ >>> yocto mailing list >>> yocto@yoctoproject.org <mailto:yocto@yoctoproject.org> >>> >>> https://lists.yoctoproject.org/listinfo/yocto >>> >>> >>> >>> >> > [-- Attachment #2: Type: text/html, Size: 8172 bytes --] ^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2011-02-08 18:15 UTC | newest] Thread overview: 6+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2011-02-08 13:46 Adding machine for linux-yocto-stable Diego Sueiro 2011-02-08 14:11 ` Bruce Ashfield 2011-02-08 17:31 ` Diego Sueiro 2011-02-08 17:38 ` Bruce Ashfield 2011-02-08 18:04 ` Diego Sueiro 2011-02-08 18:15 ` Diego Sueiro
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.