* [PATCH 0/7] Add support for Vista Silicon Visstrim_M10 boards.
@ 2011-02-09 9:37 Javier Martin
2011-02-09 9:37 ` [PATCH 1/7] Add configuration file for Visstrim_M10 board Javier Martin
` (7 more replies)
0 siblings, 8 replies; 10+ messages in thread
From: Javier Martin @ 2011-02-09 9:37 UTC (permalink / raw)
To: openembedded-devel
Vista Silicon Visstrim_M10 boards are used for multimedia
streaming and access control. This series of patches
allow to create a basic image to use Visstrim_M10 board
as a decent development environment for custom applications.
^ permalink raw reply [flat|nested] 10+ messages in thread
* [PATCH 1/7] Add configuration file for Visstrim_M10 board.
2011-02-09 9:37 [PATCH 0/7] Add support for Vista Silicon Visstrim_M10 boards Javier Martin
@ 2011-02-09 9:37 ` Javier Martin
2011-02-09 9:37 ` [PATCH 2/7] Add custom fstab and profile " Javier Martin
` (6 subsequent siblings)
7 siblings, 0 replies; 10+ messages in thread
From: Javier Martin @ 2011-02-09 9:37 UTC (permalink / raw)
To: openembedded-devel
Signed-off-by: Javier Martin <javier.martin@vista-silicon.com>
---
conf/machine/visstrim_m10.conf | 28 ++++++++++++++++++++++++++++
1 files changed, 28 insertions(+), 0 deletions(-)
create mode 100644 conf/machine/visstrim_m10.conf
diff --git a/conf/machine/visstrim_m10.conf b/conf/machine/visstrim_m10.conf
new file mode 100644
index 0000000..2cce27d
--- /dev/null
+++ b/conf/machine/visstrim_m10.conf
@@ -0,0 +1,28 @@
+#@TYPE: Machine
+#@Name: Vista Silicon Visstrim M10
+#@DESCRIPTION: Machine configuration for Vista Silicon Visstrim M10
+
+TARGET_ARCH = "arm"
+
+KERNEL_IMAGETYPE = "uImage"
+UBOOT_ENTRYPOINT = "0xa0010000"
+UBOOT_LOADADDRESS = "0xa0010000"
+
+IMAGE_FSTYPES = "tar.gz squashfs"
+
+# Uncomment this for custom kernel from local git repository
+#PREFERRED_PROVIDER_virtual/kernel = "linux-visstrim-m10"
+
+PREFERRED_PROVIDER_virtual/kernel = "linux"
+
+MACHINE_FEATURES = "kernel26 apm alsa ext2 pcmcia usbhost usbgadget"
+
+require conf/machine/include/tune-arm926ejs.inc
+
+#don't try to access tty1
+USE_VT = "0"
+# used by sysvinit_2
+SERIAL_CONSOLE = "115200 ttymxc0"
+
+# used by opie-collections.inc
+ROOT_FLASH_SIZE = "32"
--
1.7.0.4
^ permalink raw reply related [flat|nested] 10+ messages in thread
* [PATCH 2/7] Add custom fstab and profile for Visstrim_M10 board.
2011-02-09 9:37 [PATCH 0/7] Add support for Vista Silicon Visstrim_M10 boards Javier Martin
2011-02-09 9:37 ` [PATCH 1/7] Add configuration file for Visstrim_M10 board Javier Martin
@ 2011-02-09 9:37 ` Javier Martin
2011-02-09 9:37 ` [PATCH 3/7] Add custom init dropbear script and image for Visstrim_M10 Javier Martin
` (5 subsequent siblings)
7 siblings, 0 replies; 10+ messages in thread
From: Javier Martin @ 2011-02-09 9:37 UTC (permalink / raw)
To: openembedded-devel
Signed-off-by: Javier Martin <javier.martin@vista-silicon.com>
---
recipes/base-files/base-files/visstrim_m10/fstab | 9 +++++
recipes/base-files/base-files/visstrim_m10/profile | 34 ++++++++++++++++++++
recipes/base-files/base-files_3.0.14.bb | 5 +++
3 files changed, 48 insertions(+), 0 deletions(-)
create mode 100644 recipes/base-files/base-files/visstrim_m10/fstab
create mode 100644 recipes/base-files/base-files/visstrim_m10/profile
diff --git a/recipes/base-files/base-files/visstrim_m10/fstab b/recipes/base-files/base-files/visstrim_m10/fstab
new file mode 100644
index 0000000..c50280c
--- /dev/null
+++ b/recipes/base-files/base-files/visstrim_m10/fstab
@@ -0,0 +1,9 @@
+# Visstrim_M10 fstab
+
+proc /proc proc defaults 0 0
+sys /sys sysfs defaults 0 0
+usbfs /proc/bus/usb usbfs defaults 0 0
+tmpfs /media/ram tmpfs defaults 0 0
+devpts /dev/pts devpts defaults 0 0
+
+/dev/mmcblk0p1 /opt auto defaults,sync,noauto 0 0
diff --git a/recipes/base-files/base-files/visstrim_m10/profile b/recipes/base-files/base-files/visstrim_m10/profile
new file mode 100644
index 0000000..7ae3dfb
--- /dev/null
+++ b/recipes/base-files/base-files/visstrim_m10/profile
@@ -0,0 +1,34 @@
+# /etc/profile: system-wide .profile file for the Bourne shell (sh(1))
+# and Bourne compatible shells (bash(1), ksh(1), ash(1), ...).
+
+PATH="/opt/usr/bin:/opt/bin:/opt/sbin:/usr/local/bin:/usr/bin:/bin"
+EDITOR="/bin/vi" # needed for packages like cron
+test -z "$TERM" && TERM="vt100" # Basic terminal capab. For screen etc.
+
+if [ ! -e /etc/localtime -a ! -e /etc/TZ ]; then
+ TZ="UTC" # Time Zone. Look at http://theory.uwinnipeg.ca/gnu/glibc/libc_303.html
+ # for an explanation of how to set this to your local timezone.
+ export TZ
+fi
+
+if [ "`id -u`" -eq 0 ]; then
+ PATH=$PATH:/usr/local/sbin:/usr/sbin:/sbin
+fi
+if [ "$PS1" ]; then
+# works for bash and ash (no other shells known to be in use here)
+ PS1='\u@\h:\w\$ '
+fi
+
+if [ -d /etc/profile.d ]; then
+ for i in /etc/profile.d/*.sh; do
+ if [ -r $i ]; then
+ . $i
+ fi
+ done
+ unset i
+fi
+
+export PATH PS1 OPIEDIR QPEDIR QTDIR EDITOR TERM
+
+umask 022
+
diff --git a/recipes/base-files/base-files_3.0.14.bb b/recipes/base-files/base-files_3.0.14.bb
index 2d6d926..302f68d 100644
--- a/recipes/base-files/base-files_3.0.14.bb
+++ b/recipes/base-files/base-files_3.0.14.bb
@@ -165,6 +165,11 @@ do_install_append_tb5200l() {
ln -s var/tmp ${D}/tmp
}
+do_install_append_visstrim_m10() {
+ mkdir -p ${D}/opt
+ mkdir -p ${D}/mnt/jffs2
+ mkdir -p ${D}/mnt/defaults/etc
+}
PACKAGES = "${PN}-dbg ${PN}-doc ${PN}"
FILES_${PN} = "/*"
--
1.7.0.4
^ permalink raw reply related [flat|nested] 10+ messages in thread
* [PATCH 3/7] Add custom init dropbear script and image for Visstrim_M10.
2011-02-09 9:37 [PATCH 0/7] Add support for Vista Silicon Visstrim_M10 boards Javier Martin
2011-02-09 9:37 ` [PATCH 1/7] Add configuration file for Visstrim_M10 board Javier Martin
2011-02-09 9:37 ` [PATCH 2/7] Add custom fstab and profile " Javier Martin
@ 2011-02-09 9:37 ` Javier Martin
2011-02-09 9:37 ` [PATCH 4/7] Add custom opkg settings for Visstrim_M10 board Javier Martin
` (4 subsequent siblings)
7 siblings, 0 replies; 10+ messages in thread
From: Javier Martin @ 2011-02-09 9:37 UTC (permalink / raw)
To: openembedded-devel
Custom init script is needed since "/" is mounted as read-only
but "/etc" is mounted as read-write in Visstrim_M10 boards.
This case is not supported by default init script.
Signed-off-by: Javier Martin <javier.martin@vista-silicon.com>
---
recipes/dropbear/dropbear/visstrim_m10/init | 91 +++++++++++++++++++++++++++
recipes/images/micro-image-visstrim.bb | 48 ++++++++++++++
2 files changed, 139 insertions(+), 0 deletions(-)
create mode 100644 recipes/dropbear/dropbear/visstrim_m10/init
create mode 100644 recipes/images/micro-image-visstrim.bb
diff --git a/recipes/dropbear/dropbear/visstrim_m10/init b/recipes/dropbear/dropbear/visstrim_m10/init
new file mode 100644
index 0000000..72ca918
--- /dev/null
+++ b/recipes/dropbear/dropbear/visstrim_m10/init
@@ -0,0 +1,91 @@
+#!/bin/sh
+#
+# Do not configure this file. Edit /etc/default/dropbear instead!
+#
+
+PATH=/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin
+DAEMON=/usr/sbin/dropbear
+NAME=dropbear
+DESC="Dropbear SSH server"
+PIDFILE=/var/run/dropbear.pid
+
+DROPBEAR_PORT=22
+DROPBEAR_EXTRA_ARGS=
+NO_START=0
+
+test ! -r /etc/default/dropbear || . /etc/default/dropbear
+test "$NO_START" = "0" || exit 0
+test -x "$DAEMON" || exit 0
+test ! -h /var/service/dropbear || exit 0
+
+# Allows comma-separated list of addresses/ports
+DROPBEAR_PORT=`echo $DROPBEAR_PORT | sed "s/,/ -p /g"`
+DROPBEAR_RSAKEY_DEFAULT="/etc/dropbear/dropbear_rsa_host_key"
+DROPBEAR_DSSKEY_DEFAULT="/etc/dropbear/dropbear_dss_host_key"
+
+
+test -z "$DROPBEAR_BANNER" || \
+ DROPBEAR_EXTRA_ARGS="$DROPBEAR_EXTRA_ARGS -b $DROPBEAR_BANNER"
+test -n "$DROPBEAR_RSAKEY" || \
+ DROPBEAR_RSAKEY=$DROPBEAR_RSAKEY_DEFAULT
+test -n "$DROPBEAR_DSSKEY" || \
+ DROPBEAR_DSSKEY=$DROPBEAR_DSSKEY_DEFAULT
+test -n "$DROPBEAR_KEYTYPES" || \
+ DROPBEAR_KEYTYPES="rsa"
+
+gen_keys() {
+for t in $DROPBEAR_KEYTYPES; do
+ case $t in
+ rsa)
+ if [ ! -f $DROPBEAR_RSAKEY ]; then
+ echo "Creating $DESC RSA host key."
+ dropbearkey -t rsa -f $DROPBEAR_RSAKEY
+ fi
+ ;;
+ dsa)
+ if [ ! -f $DROPBEAR_DSSKEY ]; then
+ echo "Creating $DESC DSA host key."
+ dropbearkey -t dss -f $DROPBEAR_DSSKEY
+ fi
+ ;;
+ esac
+done
+}
+
+case "$1" in
+ start)
+ gen_keys
+ echo -n "Starting $DESC: "
+ KEY_ARGS=""
+ test -f $DROPBEAR_DSSKEY && KEY_ARGS="$KEY_ARGS -d $DROPBEAR_DSSKEY"
+ test -f $DROPBEAR_RSAKEY && KEY_ARGS="$KEY_ARGS -r $DROPBEAR_RSAKEY"
+ start-stop-daemon -S -p $PIDFILE \
+ -x "$DAEMON" -- $KEY_ARGS \
+ -p $DROPBEAR_PORT $DROPBEAR_EXTRA_ARGS
+ echo "$NAME."
+ ;;
+ stop)
+ echo -n "Stopping $DESC: "
+ start-stop-daemon -K -x "$DAEMON" -p $PIDFILE
+ echo "$NAME."
+ ;;
+ restart|force-reload)
+ echo -n "Restarting $DESC: "
+ start-stop-daemon -K -x "$DAEMON" -p $PIDFILE
+ sleep 1
+ KEY_ARGS=""
+ test -f $DROPBEAR_DSSKEY && KEY_ARGS="$KEY_ARGS -d $DROPBEAR_DSSKEY"
+ test -f $DROPBEAR_RSAKEY && KEY_ARGS="$KEY_ARGS -r $DROPBEAR_RSAKEY"
+ start-stop-daemon -S -p $PIDFILE \
+ -x "$DAEMON" -- $KEY_ARGS \
+ -p $DROPBEAR_PORT $DROPBEAR_EXTRA_ARGS
+ echo "$NAME."
+ ;;
+ *)
+ N=/etc/init.d/$NAME
+ echo "Usage: $N {start|stop|restart|force-reload}" >&2
+ exit 1
+ ;;
+esac
+
+exit 0
diff --git a/recipes/images/micro-image-visstrim.bb b/recipes/images/micro-image-visstrim.bb
new file mode 100644
index 0000000..a53b076
--- /dev/null
+++ b/recipes/images/micro-image-visstrim.bb
@@ -0,0 +1,48 @@
+# micro-image-visstrim
+#
+# This image is based on micro-image and contains basic packages that are needed
+# to boot Visstrim_M10 boards and use jffs2+squashfs power cut safe schema.
+#
+# The image is tested to build and run succesfully with the following machines:
+#
+# * visstrim_m10
+#
+# Maintainer: Javier Martin <javier.martin@vista-silicon.com>
+#
+
+DISTRO_SSH_DAEMON ?= "dropbear"
+
+# Install basic files only
+IMAGE_INSTALL = "base-files \
+ visstrim-m10-utils \
+ base-passwd \
+ netbase \
+ u-boot-utils \
+ ${DISTRO_SSH_DAEMON}"
+
+IMAGE_LINGUAS = ""
+
+# Use busybox as login manager
+IMAGE_LOGIN_MANAGER = "busybox"
+
+# Include minimum init and init scripts
+IMAGE_DEV_MANAGER = ""
+IMAGE_INIT_MANAGER = "sysvinit sysvinit-pidof"
+IMAGE_INITSCRIPTS = ""
+
+inherit image
+
+fso_rootfs_postprocess() {
+ curdir=$PWD
+ cd ${DEPLOY_DIR_IMAGE}
+ mkdir -p tmp/config0
+ mkdir -p tmp/config1
+ cp -a ${IMAGE_ROOTFS}/etc tmp/config0/
+ cp -a ${IMAGE_ROOTFS}/etc tmp/config1/
+ mkfs.jffs2 -r ./tmp -s 0x800 -e 0x20000 -o ${MACHINE}-config.jffs2 --pad=0x200000
+ rm -rf ./tmp
+ cd $curdir
+}
+
+ROOTFS_POSTPROCESS_COMMAND += "fso_rootfs_postprocess"
+
--
1.7.0.4
^ permalink raw reply related [flat|nested] 10+ messages in thread
* [PATCH 4/7] Add custom opkg settings for Visstrim_M10 board.
2011-02-09 9:37 [PATCH 0/7] Add support for Vista Silicon Visstrim_M10 boards Javier Martin
` (2 preceding siblings ...)
2011-02-09 9:37 ` [PATCH 3/7] Add custom init dropbear script and image for Visstrim_M10 Javier Martin
@ 2011-02-09 9:37 ` Javier Martin
2011-02-09 9:37 ` [PATCH 5/7] Add custom fw_env.conf for Visstrim_M10 boards Javier Martin
` (3 subsequent siblings)
7 siblings, 0 replies; 10+ messages in thread
From: Javier Martin @ 2011-02-09 9:37 UTC (permalink / raw)
To: openembedded-devel
"/opt" is used in Visstrim_M10 boards as the working directory
for opkg.
Signed-off-by: Javier Martin <javier.martin@vista-silicon.com>
---
recipes/opkg/opkg-collateral/visstrim_m10/dest | 1 +
recipes/opkg/opkg-collateral/visstrim_m10/lists | 2 ++
recipes/opkg/opkg-collateral/visstrim_m10/tmp_dir | 4 ++++
recipes/opkg/opkg_svn.bb | 2 ++
4 files changed, 9 insertions(+), 0 deletions(-)
create mode 100644 recipes/opkg/opkg-collateral/visstrim_m10/dest
create mode 100644 recipes/opkg/opkg-collateral/visstrim_m10/lists
create mode 100644 recipes/opkg/opkg-collateral/visstrim_m10/tmp_dir
diff --git a/recipes/opkg/opkg-collateral/visstrim_m10/dest b/recipes/opkg/opkg-collateral/visstrim_m10/dest
new file mode 100644
index 0000000..c2b9657
--- /dev/null
+++ b/recipes/opkg/opkg-collateral/visstrim_m10/dest
@@ -0,0 +1 @@
+dest root /opt
diff --git a/recipes/opkg/opkg-collateral/visstrim_m10/lists b/recipes/opkg/opkg-collateral/visstrim_m10/lists
new file mode 100644
index 0000000..77c0834
--- /dev/null
+++ b/recipes/opkg/opkg-collateral/visstrim_m10/lists
@@ -0,0 +1,2 @@
+lists_dir ext /opt/var/lib/opkg
+
diff --git a/recipes/opkg/opkg-collateral/visstrim_m10/tmp_dir b/recipes/opkg/opkg-collateral/visstrim_m10/tmp_dir
new file mode 100644
index 0000000..b3f8d53
--- /dev/null
+++ b/recipes/opkg/opkg-collateral/visstrim_m10/tmp_dir
@@ -0,0 +1,4 @@
+# We have whole /tmp in volatile tmpfs which is better than wear leveling NAND or uSD
+# But also bad for big upgrades where tmpfs eats whole memory,
+# device starts swapping (possibly using more NAND/uSD than temporary unpack) and then segfaults because of lack of space
+option tmp_dir /tmp
diff --git a/recipes/opkg/opkg_svn.bb b/recipes/opkg/opkg_svn.bb
index cfdf9fc..7ea1510 100644
--- a/recipes/opkg/opkg_svn.bb
+++ b/recipes/opkg/opkg_svn.bb
@@ -21,3 +21,5 @@ pkg_postrm_${PN} () {
}
require update-alternatives-merge.inc
+
+EXTRA_OECONF_append_visstrim_m10 = " --with-opkglockfile=/var/lock/opkg.lock"
--
1.7.0.4
^ permalink raw reply related [flat|nested] 10+ messages in thread
* [PATCH 5/7] Add custom fw_env.conf for Visstrim_M10 boards.
2011-02-09 9:37 [PATCH 0/7] Add support for Vista Silicon Visstrim_M10 boards Javier Martin
` (3 preceding siblings ...)
2011-02-09 9:37 ` [PATCH 4/7] Add custom opkg settings for Visstrim_M10 board Javier Martin
@ 2011-02-09 9:37 ` Javier Martin
2011-02-09 9:37 ` [PATCH 6/7] Add new specific package for Visstrim_M10 board Javier Martin
` (2 subsequent siblings)
7 siblings, 0 replies; 10+ messages in thread
From: Javier Martin @ 2011-02-09 9:37 UTC (permalink / raw)
To: openembedded-devel
Signed-off-by: Javier Martin <javier.martin@vista-silicon.com>
---
recipes/u-boot/files/visstrim_m10/fw_env.config | 9 +++++++++
1 files changed, 9 insertions(+), 0 deletions(-)
create mode 100644 recipes/u-boot/files/visstrim_m10/fw_env.config
diff --git a/recipes/u-boot/files/visstrim_m10/fw_env.config b/recipes/u-boot/files/visstrim_m10/fw_env.config
new file mode 100644
index 0000000..0778c32
--- /dev/null
+++ b/recipes/u-boot/files/visstrim_m10/fw_env.config
@@ -0,0 +1,9 @@
+# Configuration file for fw_(printenv/saveenv) utility.
+# Up to two entries are valid, in this case the redundant
+# environment sector is assumed present.
+# Notice, that the "Number of sectors" is ignored on NOR.
+
+# MTD device name Device offset Env. size Flash sector size Number of sectors
+/dev/mtd7 0x0 0x8000 0x8000
+/dev/mtd8 0x0 0x8000 0x8000
+
--
1.7.0.4
^ permalink raw reply related [flat|nested] 10+ messages in thread
* [PATCH 6/7] Add new specific package for Visstrim_M10 board.
2011-02-09 9:37 [PATCH 0/7] Add support for Vista Silicon Visstrim_M10 boards Javier Martin
` (4 preceding siblings ...)
2011-02-09 9:37 ` [PATCH 5/7] Add custom fw_env.conf for Visstrim_M10 boards Javier Martin
@ 2011-02-09 9:37 ` Javier Martin
2011-02-12 15:02 ` Tom Rini
2011-02-09 9:37 ` [PATCH 7/7] Make kernel 2.6.37 selectable " Javier Martin
2011-02-12 15:03 ` [PATCH 0/7] Add support for Vista Silicon Visstrim_M10 boards Tom Rini
7 siblings, 1 reply; 10+ messages in thread
From: Javier Martin @ 2011-02-09 9:37 UTC (permalink / raw)
To: openembedded-devel
This visstrim-m10-utils package includes a preinit script for
Visstrim_M10 boards and the commands "save_config" and
"default_config" which write volatile directories to a
non volatile storage.
Signed-off-by: Javier Martin <javier.martin@vista-silicon.com>
---
recipes/visstrim-m10-utils/files/default_config | 4 ++
recipes/visstrim-m10-utils/files/preinit | 31 ++++++++++++++++++
recipes/visstrim-m10-utils/files/save_config | 18 ++++++++++
.../visstrim-m10-utils/visstrim-m10-utils_0.1.bb | 34 ++++++++++++++++++++
4 files changed, 87 insertions(+), 0 deletions(-)
create mode 100644 recipes/visstrim-m10-utils/files/default_config
create mode 100644 recipes/visstrim-m10-utils/files/preinit
create mode 100644 recipes/visstrim-m10-utils/files/save_config
create mode 100644 recipes/visstrim-m10-utils/visstrim-m10-utils_0.1.bb
diff --git a/recipes/visstrim-m10-utils/files/default_config b/recipes/visstrim-m10-utils/files/default_config
new file mode 100644
index 0000000..bb880e4
--- /dev/null
+++ b/recipes/visstrim-m10-utils/files/default_config
@@ -0,0 +1,4 @@
+#!/bin/sh
+
+rm -rf /etc/*
+cp -a /mnt/defaults/etc/* /etc/
diff --git a/recipes/visstrim-m10-utils/files/preinit b/recipes/visstrim-m10-utils/files/preinit
new file mode 100644
index 0000000..16b7c9b
--- /dev/null
+++ b/recipes/visstrim-m10-utils/files/preinit
@@ -0,0 +1,31 @@
+#!/bin/sh
+/bin/echo "Vista Silicon init."
+
+# Basic fixes
+mkdir /dev/pts
+mount -a
+mkdir -p /media/ram/tmp
+mount -o bind /media/ram/tmp /tmp
+mkdir -p /media/ram/var/volatile
+cp -a /var/volatile/* /media/ram/var/volatile
+mount -o bind /media/ram/var/volatile /var/volatile
+mkdir -p /media/ram/etc
+
+# Mount jffs2
+bootgroup=`/sbin/fw_printenv bootgroup | /bin/sed 's/.*=//'`
+if [ $bootgroup = "0" ];
+then
+ p=3
+else
+ p=6
+fi
+mount -t jffs2 -o ro /dev/mtdblock$p /mnt/jffs2
+
+# Set up etc
+cfg=`/sbin/fw_printenv active_config | /bin/sed 's/.*=//'`
+cp -a /mnt/jffs2/config$cfg/etc/* /media/ram/etc
+mount -o bind /etc /mnt/defaults/etc
+mount -o bind /media/ram/etc /etc
+
+# Call true init
+exec /sbin/init 5
diff --git a/recipes/visstrim-m10-utils/files/save_config b/recipes/visstrim-m10-utils/files/save_config
new file mode 100644
index 0000000..2c4d5b7
--- /dev/null
+++ b/recipes/visstrim-m10-utils/files/save_config
@@ -0,0 +1,18 @@
+#!/bin/sh
+
+mount -o remount,rw,noatime /mnt/jffs2
+cfg=`/sbin/fw_printenv active_config | /bin/sed 's/.*=//'`
+if [ $cfg = "0" ];
+then
+ new_cfg="1"
+else
+ new_cfg="0"
+fi
+
+rm -rf /mnt/jffs2/config$new_cfg
+mkdir -p /mnt/jffs2/tmp
+cp -a /etc /mnt/jffs2/tmp/
+mv /mnt/jffs2/tmp /mnt/jffs2/config$new_cfg
+mount -o remount,ro /mnt/jffs2
+
+/sbin/fw_setenv active_config $new_cfg
diff --git a/recipes/visstrim-m10-utils/visstrim-m10-utils_0.1.bb b/recipes/visstrim-m10-utils/visstrim-m10-utils_0.1.bb
new file mode 100644
index 0000000..824f30f
--- /dev/null
+++ b/recipes/visstrim-m10-utils/visstrim-m10-utils_0.1.bb
@@ -0,0 +1,34 @@
+DESCRIPTION = "Visstrim_m10 set of scripts to allow squashfs+jffs2 schema"
+SECTION = "base"
+PRIORITY = "required"
+LICENSE = "TODO"
+PR = "r0"
+
+SRC_URI = "file://preinit \
+ file://save_config \
+ file://default_config \
+ "
+
+SCRIPTS_SBIN = "preinit"
+SCRIPTS_USR_SBIN = "save_config default_config"
+
+# This just makes things easier...
+S="${WORKDIR}"
+
+do_install() {
+ # Directories
+ install -d ${D}${sbindir} \
+ ${D}${base_sbindir}
+
+ # Shell scripts
+ for p in ${SCRIPTS_SBIN}
+ do
+ install -m 0755 $p ${D}${base_sbindir}/$p
+ done
+ for p in ${SCRIPTS_USR_SBIN}
+ do
+ install -m 0755 $p ${D}${sbindir}/$p
+ done
+}
+
+FILES_${PN} = "/"
--
1.7.0.4
^ permalink raw reply related [flat|nested] 10+ messages in thread
* [PATCH 7/7] Make kernel 2.6.37 selectable for Visstrim_M10 board.
2011-02-09 9:37 [PATCH 0/7] Add support for Vista Silicon Visstrim_M10 boards Javier Martin
` (5 preceding siblings ...)
2011-02-09 9:37 ` [PATCH 6/7] Add new specific package for Visstrim_M10 board Javier Martin
@ 2011-02-09 9:37 ` Javier Martin
2011-02-12 15:03 ` [PATCH 0/7] Add support for Vista Silicon Visstrim_M10 boards Tom Rini
7 siblings, 0 replies; 10+ messages in thread
From: Javier Martin @ 2011-02-09 9:37 UTC (permalink / raw)
To: openembedded-devel
Signed-off-by: Javier Martin <javier.martin@vista-silicon.com>
---
recipes/linux/linux-2.6.37/visstrim_m10/defconfig | 1496 +++++++++++++++++++++
recipes/linux/linux_2.6.37.bb | 1 +
2 files changed, 1497 insertions(+), 0 deletions(-)
create mode 100644 recipes/linux/linux-2.6.37/visstrim_m10/defconfig
diff --git a/recipes/linux/linux-2.6.37/visstrim_m10/defconfig b/recipes/linux/linux-2.6.37/visstrim_m10/defconfig
new file mode 100644
index 0000000..f98d4cd
--- /dev/null
+++ b/recipes/linux/linux-2.6.37/visstrim_m10/defconfig
@@ -0,0 +1,1496 @@
+#
+# Automatically generated make config: don't edit
+# Linux/arm 2.6.37 Kernel Configuration
+# Thu Feb 3 15:53:00 2011
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+# CONFIG_ARCH_USES_GETTIMEOFFSET is not set
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_HAVE_PROC_CPU=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_NEED_DMA_MAP_STATE=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+CONFIG_HAVE_IRQ_WORK=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_CROSS_COMPILE=""
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_HAVE_KERNEL_LZO=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_LZMA is not set
+# CONFIG_KERNEL_LZO is not set
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_HAVE_GENERIC_HARDIRQS is not set
+# CONFIG_SPARSE_IRQ is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TINY_RCU=y
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=17
+# CONFIG_CGROUPS is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+CONFIG_IPC_NS=y
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
+# CONFIG_SYSFS_DEPRECATED is not set
+# CONFIG_RELAY is not set
+# CONFIG_BLK_DEV_INITRD is not set
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
+CONFIG_PERF_USE_VMALLOC=y
+
+#
+# Kernel Performance Events And Counters
+#
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PERF_COUNTERS is not set
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+# CONFIG_COMPAT_BRK is not set
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_PROFILING is not set
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
+CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+# CONFIG_MODULES is not set
+CONFIG_BLOCK=y
+CONFIG_LBDAF=y
+CONFIG_BLK_DEV_BSG=y
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_DEFAULT_NOOP=y
+CONFIG_DEFAULT_IOSCHED="noop"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
+# CONFIG_FREEZER is not set
+
+#
+# System Type
+#
+CONFIG_MMU=y
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_VEXPRESS is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_BCMRING is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CNS3XXX is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+CONFIG_ARCH_MXC=y
+# CONFIG_ARCH_STMP3XXX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_DOVE is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_LPC32XX is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_NUC93X is not set
+# CONFIG_ARCH_TEGRA is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_SHMOBILE is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_S5P64X0 is not set
+# CONFIG_ARCH_S5P6442 is not set
+# CONFIG_ARCH_S5PC100 is not set
+# CONFIG_ARCH_S5PV210 is not set
+# CONFIG_ARCH_S5PV310 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_TCC_926 is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_U8500 is not set
+# CONFIG_ARCH_NOMADIK is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_PLAT_SPEAR is not set
+CONFIG_IMX_HAVE_PLATFORM_FEC=y
+CONFIG_IMX_HAVE_PLATFORM_IMX_I2C=y
+CONFIG_IMX_HAVE_PLATFORM_IMX_UART=y
+
+#
+# Freescale MXC Implementations
+#
+# CONFIG_ARCH_MX1 is not set
+CONFIG_ARCH_MX2=y
+# CONFIG_ARCH_MX25 is not set
+# CONFIG_ARCH_MX3 is not set
+# CONFIG_ARCH_MXC91231 is not set
+# CONFIG_ARCH_MX5 is not set
+CONFIG_IMX_HAVE_DMA_V1=y
+CONFIG_SOC_IMX27=y
+# CONFIG_MACH_MX21 is not set
+CONFIG_MACH_MX27=y
+
+#
+# MX27 platforms:
+#
+# CONFIG_MACH_MX27ADS is not set
+# CONFIG_MACH_PCM038 is not set
+# CONFIG_MACH_CPUIMX27 is not set
+# CONFIG_MACH_MX27_3DS is not set
+CONFIG_MACH_IMX27_VISSTRIM_M10=y
+# CONFIG_MACH_IMX27LITE is not set
+# CONFIG_MACH_PCA100 is not set
+# CONFIG_MACH_MXT_TD60 is not set
+# CONFIG_MXC_IRQ_PRIOR is not set
+# CONFIG_MXC_PWM is not set
+# CONFIG_MXC_DEBUG_BOARD is not set
+CONFIG_IMX_HAVE_IOMUX_V1=y
+CONFIG_ARCH_MXC_AUDMUX_V1=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_ARM926T=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5TJ=y
+CONFIG_CPU_PABRT_LEGACY=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
+CONFIG_ARM_L1_CACHE_SHIFT=5
+CONFIG_COMMON_CLKDEV=y
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=100
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_HAVE_MEMBLOCK=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=999999
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_NEED_PER_CPU_KM=y
+CONFIG_FORCE_MAX_ZONEORDER=11
+CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
+# CONFIG_SECCOMP is not set
+# CONFIG_CC_STACKPROTECTOR is not set
+# CONFIG_DEPRECATED_PARAM_STRUCT is not set
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0
+CONFIG_ZBOOT_ROM_BSS=0
+CONFIG_CMDLINE=""
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+# CONFIG_AUTO_ZRELADDR is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+# CONFIG_FPE_NWFPE is not set
+# CONFIG_FPE_FASTFPE is not set
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+CONFIG_NET_KEY=y
+# CONFIG_NET_KEY_MIGRATE is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE_DEMUX is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+CONFIG_INET_TUNNEL=y
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+CONFIG_INET_LRO=y
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+CONFIG_IPV6=y
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
+# CONFIG_INET6_AH is not set
+# CONFIG_INET6_ESP is not set
+# CONFIG_INET6_IPCOMP is not set
+# CONFIG_IPV6_MIP6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+CONFIG_INET6_XFRM_MODE_TRANSPORT=y
+CONFIG_INET6_XFRM_MODE_TUNNEL=y
+CONFIG_INET6_XFRM_MODE_BEET=y
+# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
+CONFIG_IPV6_SIT=y
+# CONFIG_IPV6_SIT_6RD is not set
+CONFIG_IPV6_NDISC_NODETYPE=y
+# CONFIG_IPV6_TUNNEL is not set
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MROUTE is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_L2TP is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+# CONFIG_LIB80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+
+#
+# Some wireless drivers require a rate control algorithm
+#
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+# CONFIG_CAIF is not set
+# CONFIG_CEPH_LIB is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH=""
+# CONFIG_DEVTMPFS is not set
+CONFIG_STANDALONE=y
+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
+CONFIG_FW_LOADER=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+CONFIG_MTD_REDBOOT_PARTS=y
+CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
+# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
+# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_SM_FTL is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MG_DISK is not set
+# CONFIG_BLK_DEV_RBD is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+CONFIG_SCSI_MOD=y
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_ISCSI_BOOT_SYSFS is not set
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_MII is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_BCM63XX_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_MICREL_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+# CONFIG_AX88796 is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_KS8851_MLL is not set
+CONFIG_FEC=y
+# CONFIG_FEC2 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+CONFIG_WLAN=y
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_HOSTAP is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_USB_IPHETH is not set
+# CONFIG_WAN is not set
+
+#
+# CAIF transport drivers
+#
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_DEVKMEM is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_N_GSM is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_IMX=y
+CONFIG_SERIAL_IMX_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_TIMBERDALE is not set
+# CONFIG_SERIAL_ALTERA_JTAGUART is not set
+# CONFIG_SERIAL_ALTERA_UART is not set
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_RAMOOPS is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
+CONFIG_I2C_CHARDEV=y
+# CONFIG_I2C_MUX is not set
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_DESIGNWARE is not set
+# CONFIG_I2C_GPIO is not set
+CONFIG_I2C_IMX=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_XILINX is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# Memory mapped GPIO expanders:
+#
+# CONFIG_GPIO_BASIC_MMIO is not set
+# CONFIG_GPIO_IT8761E is not set
+# CONFIG_GPIO_VX855 is not set
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX7300 is not set
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+# CONFIG_GPIO_SX150X is not set
+# CONFIG_GPIO_ADP5588 is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+
+#
+# AC97 GPIO expanders:
+#
+
+#
+# MODULbus GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+CONFIG_MFD_SUPPORT=y
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_88PM860X is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_HTC_I2CPLD is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TPS6507X is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_STMPE is not set
+# CONFIG_MFD_TC35892 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_MAX8925 is not set
+# CONFIG_MFD_MAX8998 is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X_I2C is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_WM8994 is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_ABX500_CORE is not set
+# CONFIG_MFD_TPS6586X is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_MEDIA_SUPPORT is not set
+
+#
+# Graphics support
+#
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_SOUND=y
+CONFIG_SOUND_OSS_CORE=y
+CONFIG_SOUND_OSS_CORE_PRECLAIM=y
+CONFIG_SND=y
+CONFIG_SND_TIMER=y
+CONFIG_SND_PCM=y
+CONFIG_SND_JACK=y
+# CONFIG_SND_SEQUENCER is not set
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=y
+CONFIG_SND_PCM_OSS=y
+CONFIG_SND_PCM_OSS_PLUGINS=y
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
+CONFIG_SND_VERBOSE_PROCFS=y
+CONFIG_SND_VERBOSE_PRINTK=y
+CONFIG_SND_DEBUG=y
+CONFIG_SND_DEBUG_VERBOSE=y
+# CONFIG_SND_PCM_XRUN_DEBUG is not set
+# CONFIG_SND_RAWMIDI_SEQ is not set
+# CONFIG_SND_OPL3_LIB_SEQ is not set
+# CONFIG_SND_OPL4_LIB_SEQ is not set
+# CONFIG_SND_SBAWE_SEQ is not set
+# CONFIG_SND_EMU10K1_SEQ is not set
+CONFIG_SND_DRIVERS=y
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_ALOOP is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+CONFIG_SND_ARM=y
+CONFIG_SND_USB=y
+# CONFIG_SND_USB_AUDIO is not set
+# CONFIG_SND_USB_UA101 is not set
+# CONFIG_SND_USB_CAIAQ is not set
+CONFIG_SND_SOC=y
+# CONFIG_SND_IMX_SOC is not set
+CONFIG_SND_SOC_I2C_AND_SPI=y
+# CONFIG_SND_SOC_ALL_CODECS is not set
+# CONFIG_SOUND_PRIME is not set
+# CONFIG_HID_SUPPORT is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+# CONFIG_USB_ARCH_HAS_OHCI is not set
+CONFIG_USB_ARCH_HAS_EHCI=y
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_DEVICE_CLASS is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+CONFIG_USB_MON=y
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_ROOT_HUB_TT=y
+# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+CONFIG_USB_EHCI_MXC=y
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+# CONFIG_USB_MUSB_HDRC is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+
+#
+# also be needed; see USB_STORAGE Help for more info
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_UAS is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_YUREX is not set
+# CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_USB_ULPI is not set
+# CONFIG_NOP_USB_XCEIV is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_MINORS=8
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+# CONFIG_MMC_SDHCI is not set
+CONFIG_MMC_MXC=y
+# CONFIG_MMC_USHC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
+CONFIG_STAGING=y
+# CONFIG_STAGING_EXCLUDE_BUILD is not set
+# CONFIG_USB_IP_COMMON is not set
+# CONFIG_ECHO is not set
+# CONFIG_BRCM80211 is not set
+# CONFIG_RT2870 is not set
+# CONFIG_ASUS_OLED is not set
+# CONFIG_R8712U is not set
+# CONFIG_TRANZPORT is not set
+# CONFIG_POHMELFS is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_LINE6_USB is not set
+# CONFIG_VT6656 is not set
+# CONFIG_IIO is not set
+# CONFIG_ZRAM is not set
+# CONFIG_BATMAN_ADV is not set
+
+#
+# Texas Instruments shared transport line discipline
+#
+# CONFIG_SMB_FS is not set
+CONFIG_MACH_NO_WESTBRIDGE=y
+# CONFIG_ATH6K_LEGACY is not set
+# CONFIG_BCM_WIMAX is not set
+# CONFIG_FT1000 is not set
+
+#
+# Speakup console speech
+#
+# CONFIG_SPEAKUP is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+# CONFIG_DNOTIFY is not set
+CONFIG_INOTIFY_USER=y
+# CONFIG_FANOTIFY is not set
+# CONFIG_QUOTA is not set
+# CONFIG_QUOTACTL is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+CONFIG_GENERIC_ACL=y
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+# CONFIG_MSDOS_FS is not set
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_LOGFS is not set
+# CONFIG_CRAMFS is not set
+CONFIG_SQUASHFS=y
+# CONFIG_SQUASHFS_XATTR is not set
+# CONFIG_SQUASHFS_LZO is not set
+# CONFIG_SQUASHFS_EMBEDDED is not set
+CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+# CONFIG_NFS_FS is not set
+# CONFIG_NFSD is not set
+# CONFIG_CEPH_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+# CONFIG_LOCKUP_DETECTOR is not set
+# CONFIG_HARDLOCKUP_DETECTOR is not set
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+CONFIG_BKL=y
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_SPARSE_RCU_POINTER is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_INFO_REDUCED is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_TEST_LIST_SORT is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
+CONFIG_FTRACE=y
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_ATOMIC64_SELFTEST is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+# CONFIG_STRICT_DEVMEM is not set
+CONFIG_ARM_UNWIND=y
+# CONFIG_DEBUG_USER is not set
+# CONFIG_DEBUG_ERRORS is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_LL is not set
+# CONFIG_OC_ETM is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY_DMESG_RESTRICT is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_RATIONAL=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
diff --git a/recipes/linux/linux_2.6.37.bb b/recipes/linux/linux_2.6.37.bb
index 99f46c3..39c0c08 100644
--- a/recipes/linux/linux_2.6.37.bb
+++ b/recipes/linux/linux_2.6.37.bb
@@ -14,6 +14,7 @@ DEFAULT_PREFERENCE_qemush4 = "1"
DEFAULT_PREFERENCE_qemumips = "1"
DEFAULT_PREFERENCE_qemumipsel = "1"
DEFAULT_PREFERENCE_qemumips64 = "1"
+DEFAULT_PREFERENCE_visstrim_m10 = "1"
# needs more testing before making it new default
# DEFAULT_PREFERENCE_om-gta02 = "1"
# DEFAULT_PREFERENCE_om-gta01 = "1"
--
1.7.0.4
^ permalink raw reply related [flat|nested] 10+ messages in thread
* Re: [PATCH 6/7] Add new specific package for Visstrim_M10 board.
2011-02-09 9:37 ` [PATCH 6/7] Add new specific package for Visstrim_M10 board Javier Martin
@ 2011-02-12 15:02 ` Tom Rini
0 siblings, 0 replies; 10+ messages in thread
From: Tom Rini @ 2011-02-12 15:02 UTC (permalink / raw)
To: openembedded-devel
On 02/09/2011 02:37 AM, Javier Martin wrote:
> This visstrim-m10-utils package includes a preinit script for
> Visstrim_M10 boards and the commands "save_config" and
> "default_config" which write volatile directories to a
> non volatile storage.
[snip]
> +++ b/recipes/visstrim-m10-utils/visstrim-m10-utils_0.1.bb
> @@ -0,0 +1,34 @@
> +DESCRIPTION = "Visstrim_m10 set of scripts to allow squashfs+jffs2 schema"
> +SECTION = "base"
> +PRIORITY = "required"
> +LICENSE = "TODO"
Please re-submit with a valid license field here.
> +FILES_${PN} = "/"
This shouldn't be needed as /sbin and /usr/sbin are in the default glob.
--
Tom Rini
Mentor Graphics Corporation
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [PATCH 0/7] Add support for Vista Silicon Visstrim_M10 boards.
2011-02-09 9:37 [PATCH 0/7] Add support for Vista Silicon Visstrim_M10 boards Javier Martin
` (6 preceding siblings ...)
2011-02-09 9:37 ` [PATCH 7/7] Make kernel 2.6.37 selectable " Javier Martin
@ 2011-02-12 15:03 ` Tom Rini
7 siblings, 0 replies; 10+ messages in thread
From: Tom Rini @ 2011-02-12 15:03 UTC (permalink / raw)
To: openembedded-devel
On 02/09/2011 02:37 AM, Javier Martin wrote:
> Vista Silicon Visstrim_M10 boards are used for multimedia
> streaming and access control. This series of patches
> allow to create a basic image to use Visstrim_M10 board
> as a decent development environment for custom applications.
Except for #6, pushed. Thanks!
--
Tom Rini
Mentor Graphics Corporation
^ permalink raw reply [flat|nested] 10+ messages in thread
end of thread, other threads:[~2011-02-12 15:04 UTC | newest]
Thread overview: 10+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2011-02-09 9:37 [PATCH 0/7] Add support for Vista Silicon Visstrim_M10 boards Javier Martin
2011-02-09 9:37 ` [PATCH 1/7] Add configuration file for Visstrim_M10 board Javier Martin
2011-02-09 9:37 ` [PATCH 2/7] Add custom fstab and profile " Javier Martin
2011-02-09 9:37 ` [PATCH 3/7] Add custom init dropbear script and image for Visstrim_M10 Javier Martin
2011-02-09 9:37 ` [PATCH 4/7] Add custom opkg settings for Visstrim_M10 board Javier Martin
2011-02-09 9:37 ` [PATCH 5/7] Add custom fw_env.conf for Visstrim_M10 boards Javier Martin
2011-02-09 9:37 ` [PATCH 6/7] Add new specific package for Visstrim_M10 board Javier Martin
2011-02-12 15:02 ` Tom Rini
2011-02-09 9:37 ` [PATCH 7/7] Make kernel 2.6.37 selectable " Javier Martin
2011-02-12 15:03 ` [PATCH 0/7] Add support for Vista Silicon Visstrim_M10 boards Tom Rini
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.